Ma Lei¶

1. Jia Zijian, Kong Lingyu, Jia Lutao, Ma Lei et al. (2024-04)
   Printability and Mechanical Properties of 3D Printing Ultra-High-Performance Concrete Incorporating Limestone-Powder
2. Ma Lei, Jia Zijian, Chen Yuning, Jiang Yifan et al. (2024-03)
   Water Loss and Shrinkage Prediction in 3D Printed Concrete with Varying w/b and Specimen Sizes
3. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
   Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
4. Niu Geng, Liu Chao, Jia Lutao, Ma Lei et al. (2024-03)
   Preparation and Performance-Analysis of 3D Printed Lightweight EPS-Concrete:
   Insights from the Excess-Paste-Theory
5. Shi Yifan, Jia Lutao, Jia Zijian, Ma Lei et al. (2024-03)
   Early-Age Inhomogeneous Deformation of 3D Printed Concrete:
   Characteristics and Influences of Superplasticizer and Water-Binder Ratio
6. Deng Zhicong, Jia Zijian, Zhang Chao, Wang Zhibin et al. (2022-10)
   3D Printing Lightweight Aggregate Concrete Prepared with Shell-Packing-Aggregate Method:
   Printability, Mechanical Properties and Pore-Structure
7. Liu Chao, Chen Yuning, Zhang Zedi, Niu Geng et al. (2022-10)
   Study of the Influence of Sand on Rheological Properties, Bubble Features and Buildability of Fresh Foamed Concrete for 3D Printing
8. Ma Lei, Zhang Qing, Lombois-Burger Hélène, Jia Zijian et al. (2022-09)
   Pore-Structure, Internal Relative Humidity, and Fiber-Orientation of 3D Printed Concrete with Polypropylene-Fiber and Their Relation with Shrinkage
9. Liu Chao, Chen Yuning, Xiong Yuanliang, Jia Lutao et al. (2022-06)
   Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Buildability of 3D Printing Foam-Concrete:
   From Water State and Flocculation Point of View
10. Wang Xianggang, Jia Lutao, Jia Zijian, Zhang Chao et al. (2022-06)
    Optimization of 3D Printing Concrete with Coarse Aggregate via Proper Mix-Design and Printing-Process
11. Zhou Wen, Zhang Yamei, Ma Lei, Li Victor (2022-04)
    Influence of Printing Parameters on 3D Printing Engineered Cementitious Composites
12. Chen Yuning, Jia Lutao, Liu Chao, Zhang Zedi et al. (2022-01)
    Mechanical Anisotropy Evolution of 3D Printed Alkali-Activated Materials with Different GGBFS-FA Combinations
13. Liu Chao, Xiong Yuanliang, Chen Yuning, Jia Lutao et al. (2022-01)
    Effect of Sulphoaluminate Cement on Fresh and Hardened Properties of 3D Printing Foamed Concrete
14. Ma Lei, Zhang Qing, Jia Zijian, Liu Chao et al. (2021-11)
    Effect of Drying Environment on Mechanical Properties, Internal RH and Pore-Structure of 3D Printed Concrete
15. Liu Chao, Wang Xianggang, Chen Yuning, Zhang Chao et al. (2021-06)
    Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Stability, Rheological Properties, and Printability of 3D Printing Foam-Concrete