2021-06
- Liu Chao, Wang Xianggang, Chen Yuning, Zhang Chao et al. (2021-06)
Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Stability, Rheological Properties, and Printability of 3D Printing Foam-Concrete
- Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom et al. (2021-06)
Numerical Simulation for 3D Printed Wall Structure During the Process of Printing Considering Uncertainty
- Bhattacherjee Shantanu, Basavaraj Anusha, Rahul Attupurathu, Santhanam Manu et al. (2021-06)
Sustainable Materials for 3D Concrete Printing
- Shen Wenkai, Shi Caijun, Khayat Kamal, Yuan Qiang et al. (2021-06)
Change in Fresh Properties of High-Strength Concrete Due to Pumping
- Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
Mix-Design Concepts for 3D Printable Concrete:
A Review
- Ko Chien-Ho (2021-06)
Constraints and Limitations of Concrete 3D Printing in Architecture
- Caron Jean-François, Demont Léo, Ducoulombier Nicolas, Mesnil Romain (2021-06)
3D Printing of Mortar with Continuous Fibers:
Principle, Properties and Potential for Application
- Babafemi Adewumi, Kolawole John, Miah Md, Paul Suvash et al. (2021-06)
A Concise Review on Inter-Layer Bond Strength in 3D Concrete Printing
- Haghighi Azadeh, Mohammed Abdullah, Wang Lihui (2021-06)
Energy Efficient Multi-Robotic 3D Printing for Large-Scale Construction:
Could This Technique Contribute to Sustainability of Future Buildings?
- Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2021-06)
Technologies for Improving Buildability in 3D Concrete Printing
- Nair Sooraj, Panda Subhashree, Tripathi Avinaya, Neithalath Narayanan (2021-06)
Relating Print-Velocity and Extrusion-Characteristics of 3D Printable Cementitious Binders:
Implications Towards Testing Methods
- Sun Junbo, Aslani Farhad, Lu Jenny, Wang Lining et al. (2021-06)
Fiber-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing
- Hierden Naomi, Gauvin Florent, Lucas Sandra, Salet Theo et al. (2021-06)
Use of Hemp-Fibers in 3D Printed Concrete
- Dai Shuo, Zhu Huajun, Zhai Munan, Wu Qisheng et al. (2021-06)
Stability of Steel-Slag as Fine Aggregate and Its Application in 3D Printing Materials
- Jørgensen Henrik, Douglas Philip, Naboni Roberto (2021-06)
Experimental Study on the Anisotropic Behavior and Strength of 3D Printed Concrete
- García-Alvarado Rodrigo, Moroni-Orellana Ginnia, Banda-Pérez Pablo (2021-06)
Architectural Evaluation of 3D Printed Buildings
- Markin Slava, Krause Martin, Otto Jens, Schröfl Christof et al. (2021-06)
3D Printing with Foam-Concrete:
From Material Design and Testing to Application and Sustainability
- Moini Mohamadreza, Baghaie Ahmadreza, Rodriguez Fabian, Zavattieri Pablo et al. (2021-06)
Quantitative Microstructural Investigation of 3D Printed and Cast Cement-Pastes Using Micro-Computed Tomography- and Image-Analysis
- Kinnell Peter, Dobrzanski James, Xu Jie, Wang Weiqiang et al. (2021-06)
Precision Manufacture of Concrete Parts Using Integrated Robotic 3D Printing and Milling
- Kloft Harald, Gehlen Christoph, Dörfler Kathrin, Hack Norman et al. (2021-06)
TRR 277:
Additive Manufacturing in Construction
- Hack Norman, Bahar Mohammad, Hühne Christian, Lopez William et al. (2021-06)
Development of a Robot-Based Multi-Directional Dynamic Fiber Winding Process for Additive Manufacturing Using Shotcrete 3D Printing
- Bakhshi Amir, Sedghi Reza, Hojati Maryam (2021-06)
A Preliminary Study on the Mix-Design of 3D Printable Engineered Cementitious Composite
- Prasittisopin Lapyote, Sakdanaraseth Thanut, Horayangkura Vimolsiddhi (2021-06)
Design and Construction Method of a 3D Concrete Printing Self-Supporting Curvi-Linear Pavilion
- Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-06)
Fire Performance of Innovative 3D Printed Concrete Composite Wall Panels:
A Numerical Study
- Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
Large-Scale 3D Printing Concrete Technology:
Current Status and Future Opportunities
- Sambucci Matteo, Valente Marco (2021-06)
Influence of Waste-Tire-Rubber-Particles-Size on the Microstructural, Mechanical, and Acoustic Insulation Properties of 3D Printable Cement Mortars
- Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2021-06)
Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete:
Correction