Xia Ming¶

1. Liu Xinhao, Hu Jiajun, Xiong Guiyan, Cundy Andrew et al. (2025-12)
   Long-Term Durability and Degradation Mechanisms of 3D Printed Geopolymers (3DPG) With/Without Healing Agents in Marine Environments
2. Zhang Hui, Wu Jie, Huang Bo-Tao, Yu Rena et al. (2025-11)
   Cross-Scale Mechanisms of Anisotropy in 3D-Printed Ultra-High-Performance Concrete
3. Lin Xiqiang, Huo Liang, Li Guoyou, Wang Hailong et al. (2024-09)
   On-Site Deployment of 3D Construction Printing for the Building a Two-Story Building in China
4. Bong Shin, Nematollahi Behzad, Xia Ming, Ghaffar Seyed et al. (2022-04)
   Properties of Additively Manufactured Geopolymer Incorporating Mineral-Wollastonite-Micro-Fibers
5. Zhang Nan, Xia Ming, Sanjayan Jay (2021-10)
   Short-Duration Near-Nozzle Mixing for 3D Concrete Printing
6. Yu Shiwei, Xia Ming, Sanjayan Jay, Yang Lin et al. (2021-07)
   Microstructural Characterization of 3D Printed Concrete
7. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2021-06)
   Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete:
   Correction
8. Bong Shin, Xia Ming, Nematollahi Behzad, Shi Caijun (2021-04)
   Ambient Temperature Cured ‘Just-Add-Water’ Geopolymer for 3D Concrete Printing Applications
9. Bong Shin, Nematollahi Behzad, Arunothayan Arun, Xia Ming et al. (2020-07)
   Effect of Wollastonite Micro-Fiber Addition on Properties of 3D Printable ‘Just-Add-Water’ Geopolymers
10. Nematollahi Behzad, Bong Shin, Xia Ming, Sanjayan Jay (2020-07)
    Digital Fabrication of ‘Just-Add-Water’ Geopolymers:
    Effects of Curing Condition and Print-Time Interval
11. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2020-07)
    Shape Accuracy Evaluation of Geopolymer Specimens Made Using Particle-Bed 3D Printing
12. Bong Shin, Nematollahi Behzad, Xia Ming, Nazari Ali et al. (2019-09)
    Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite for Digital Construction Applications
13. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-09)
    Enhancing Strength of Powder-Based 3D Printed Geopolymers for Digital Construction Applications
14. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-09)
    Post-Processing Techniques to Enhance Strength of Portland Cement Mortar Digitally Fabricated Using Powder-Based 3D Printing Process
15. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-07)
    Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications
16. Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2019-03)
    Method of Optimization for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications
17. Marchment Taylor, Sanjayan Jay, Xia Ming (2019-03)
    Method of Enhancing Inter-Layer Bond Strength in Construction-Scale 3D Printing with Mortar by Effective Bond Area Amplification
18. Marchment Taylor, Sanjayan Jay, Nematollahi Behzad, Xia Ming (2019-02)
    Inter-Layer Strength of 3D Printed Concrete
19. Nematollahi Behzad, Xia Ming, Vijay Praful, Sanjayan Jay (2019-02)
    Properties of Extrusion-Based 3D Printable Geopolymers for Digital Construction Applications
20. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
    Development of Powder-Based 3D Concrete Printing Using Geopolymers
21. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
    Properties of Powder-Based 3D Printed Geopolymers
22. Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
    Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction
23. Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2018-09)
    Fresh and Hardened Properties of 3D Printable Geopolymer Cured in Ambient Temperature
24. Nematollahi Behzad, Xia Ming, Bong Shin, Sanjayan Jay (2018-09)
    Hardened Properties of 3D Printable One-Part Geopolymer for Construction Applications
25. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2018-09)
    Compressive Strength and Dimensional Accuracy of Portland Cement Mortar Made Using Powder-Based 3D Printing for Construction Applications
26. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2018-04)
    Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete
27. Marchment Taylor, Xia Ming, Dodd Elise, Sanjayan Jay et al. (2017-07)
    Effect of Delay-Time on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
28. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2017-07)
    Current Progress of 3D Concrete Printing Technologies