Skip to content

2022-03

  1. Ma Guowei, Buswell Richard, Silva Wilson, Wang Li et al. (2022-03)
    Technology Readiness:
    A Global Snapshot of 3D Concrete Printing and the Frontiers for Development
  2. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-03)
    Modifying Effect of Anionic Polyacrylamide Dose for Cement-Based 3DP Materials:
    Printability and Mechanical Performance Tests
  3. Teixeira João, Schaefer Cecília, Maia Lino, Rangel Bárbara et al. (2022-03)
    Influence of Supplementary Cementitious Materials on Fresh Properties of 3D Printable Materials
  4. Stieler David, Schwinn Tobias, Menges Achim (2022-03)
    Automated Modularization for Precast Elements from Additively Manufactured Formwork
  5. Afarani Hajar, Moser Newell, Garboczi Edward, Esfahani Ebrahim et al. (2022-03)
    Print Fidelity Metrics for Additive Manufacturing of Cement-Based Materials
  6. Chen Mingxu, Li Haisheng, Yang Lei, Wang Shoude et al. (2022-03)
    Rheology and Shape-Stability-Control of 3D Printed Calcium-Sulphoaluminate-Cement Composites Containing Paper-Milling-Sludge
  7. Liu Jie, Lv Chun (2022-03)
    Properties of 3D Printed Polymer Fiber-Reinforced Mortars:
    A Review
  8. Pan Tinghong, Jiang Yaqing, Ji Xuping (2022-03)
    Inter-Layer Bonding Investigation of 3D Printing Cementitious Materials with Fluidity-Retaining Polycarboxylate-Superplasticizer and High-Dispersion Polycarboxylate Superplasticizer
  9. Ulubeyli Serdar (2022-03)
    Lunar Shelter Construction Issues:
    The State of the Art Towards 3D Printing Technologies
  10. Adams Thomas, Heuer Christoph, Brell-Cokcan Sigrid (2022-03)
    Dynamic 3D Print-Head for Spatial Strand-Extrusion of Fiber-Reinforced Concrete:
    Requirements, Development and Application
  11. Pan Tinghong, Teng Huaijin, Liao Hengcheng, Jiang Yaqing et al. (2022-03)
    Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials:
    Experimental and Numerical Studies
  12. Ranjan Rajeev, Kumar Deepak, Kundu Manoj, Chandra Moi Subhash (2022-03)
    A Critical Review on Classification of Materials Used in 3D Printing Process
  13. Wangler Timothy, Pileggi Rafael, Gürel Şeyma, Flatt Robert (2022-03)
    A Chemical Process Engineering Look at Digital Concrete Processes:
    Critical Step Design, In-Line Mixing, and Scale-Up
  14. Nguyen Vuong, Nguyen-Xuan Hung, Panda Biranchi, Tran Jonathan (2022-03)
    3D Concrete Printing Modelling of Thin-Walled Structures
  15. Qi Li-gang, Bai Jie, Huang Qing-long, Yang Yan et al. (2022-03)
    Mobile 3D Printing-Techniques for Construction Engineering:
    Outdoor Navigation and Printing Quality-Control
  16. Zhang Chao, Deng Zhicong, Chen Chun, Zhang Yamei et al. (2022-03)
    Predicting the Static Yield-Stress of 3D Printable Concrete Based on Flowability of Paste and Thickness of Excess-Paste-Layer
  17. Douba AlaEddin, Badjatya Palash, Kawashima Shiho (2022-03)
    Enhancing Carbonation and Strength of MgO Cement Through 3D Printing
  18. Putten Jolien, Volder Melissa, Heede Philip, Deprez Maxim et al. (2022-03)
    Transport Properties of 3D Printed Cementitious Materials with Prolonged Time-Gap Between Successive Layers
  19. Wang Bolin, Zhai Mingang, Yao Xiaofei, Wu Qing et al. (2022-03)
    Printable and Mechanical Performance of 3D Printed Concrete Employing Multiple Industrial Wastes
  20. Břoušek Josef, Petr Tomas, Beran Leoš, Myslivec Tomáš et al. (2022-03)
    Robotic Arm-Design, Development and Control for Printing Cement-Mixtures
  21. Yalçınkaya Çağlar (2022-03)
    Influence of Hydroxypropyl Methylcellulose Dosage on the Mechanical Properties of 3D Printable Mortars with and without Fiber-Reinforcement
  22. Zhi Peng, Wu Yuching, Yang Qianfan, Kong Xiangrui et al. (2022-03)
    Effect of Spiral Blade Geometry on 3D Printed Concrete Rheological Properties and Extrudability Using Discrete Event Modeling
  23. Brooks Adam, He Yawen, Farzadnia Nima, Seyfimakrani Shayan et al. (2022-03)
    Incorporating PCM-Enabled Thermal Energy Storage into 3D Printable Cementitious Composites
  24. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Yıldırım Gürkan et al. (2022-03)
    Rheological Properties and Compressive Strength of Construction and Demolition Waste-Based Geopolymer Mortars for 3D Printing
  25. Ivanova Irina, Ivaniuk Egor, Bisetti Sameercharan, Nerella Venkatesh et al. (2022-03)
    Comparison Between Methods for Indirect Assessment of Buildability in Fresh 3D Printed Mortar and Concrete
  26. Liu Siyu, Lu Bing, Li Hongliang, Pan Zehua et al. (2022-03)
    A Comparative Study on Environmental Performance of 3D Printing and Conventional Casting of Concrete Products with Industrial Wastes
  27. Tay Yi, Lim Jian, Li Mingyang, Tan Ming (2022-03)
    Creating Functionally Graded Concrete Materials with Varying 3D Printing Parameters
  28. Cui Hongzhi, Li Yuanhong, Cao Xiangpeng, Huang Mingyang et al. (2022-03)
    Experimental Study of 3D Concrete Printing-Configurations Based on the Buildability Evaluation
  29. Manhanpally Najeeb, Saha Suman (2022-03)
    Benefit-Cost Analysis of 3D Printed Concrete Building
  30. Miryousefi Ata Sara, Kazemian Ali, Jafari Amirhosein (2022-03)
    Application of Concrete 3D Printing for Bridge Construction:
    Current Challenges and Future Directions
  31. Bos Freek, Menna Costantino, Pradena Mauricio, Kreiger Eric et al. (2022-03)
    The Realities of Additively Manufactured Concrete Structures in Practice
  32. Liu Jianan, Wang Zhenjun, Zhao Xin, Yu Cong et al. (2022-03)
    Quantitative Evaluations on Influences of Aggregate Surface Texture on Interfacial Adhesion Using 3D Printing Aggregate
  33. Filho Fernando, Chen Yu, Çopuroğlu Oğuzhan (2022-03)
    Nano-Modification in Digital Manufacturing of Cementitious Composites
  34. Lachmayer Lukas, Recker Tobias, Raatz Annika (2022-03)
    Contour-Tracking-Control for Mobile Robots Applicable to Large-Scale Assembly and Additive Manufacturing in Construction
  35. Mai (née Dressler) Inka, Lowke Dirk, Perrot Arnaud (2022-03)
    Fluid-Intrusion in Powder-Beds for Selective Cement-Activation:
    An Experimental and Analytical Study
  36. Sayegh Sameh, Romdhane Lotfi, Manjikian Solair (2022-03)
    A Critical Review of 3D Printing in Construction:
    Benefits, Challenges, and Risks
  37. Jiang Zhengwu, Yang Qian, Zhu Yanmei, Zhang Yi et al. (2022-03)
    Evaluating the Stiffening Effect of CSA and Sodium Carbonate on the Printability of OPC Mortar
  38. Peerzada Abdul, Rangaraju Prasad, Roberts James, Biehl Adam (2022-03)
    Influence of External Vibration on the Gravitational Flow Characteristics of Cementitious Materials:
    A Perspective from Application in Additive Manufacturing
  39. Cui Hongzhi, Yu Shiheng, Cao Xiangpeng, Yang Haibin (2022-03)
    Evaluation of Printability and Thermal Properties of 3D Printed Concrete Mixed with Phase-Change-Materials
  40. Mechtcherine Viktor, Taubert Markus, Müller Steffen, Will Frank et al. (2022-03)
    Additive Manufacturing of Monolithic, Steel-Reinforced Concrete Walls Using CONPrint3D-Reinforced Methods
  41. Xiao Jianzhuang, Lv Zhenyuan, Duan Zhenhua, Hou Shaodan (2022-03)
    Study on Preparation and Mechanical Properties of 3D Printed Concrete with Different Aggregate-Combinations
  42. Yang Shutong, Lan Tian, Sun Zhongke, Xu Mingqi et al. (2022-03)
    A Predictive Model to Determine Tensile Strength and Fracture-Toughness of 3D Printed Fiber-Reinforced Concrete Loaded in Different Directions
  43. Yuan Qiang, Gao Chao, Huang Tingjie, Zuo Shenghao et al. (2022-03)
    Factors Influencing the Properties of Extrusion-Based 3D Printed Alkali-Activated Fly-Ash-Slag Mortar
  44. Carneau Paul, Mesnil Romain, Baverel Olivier, Roussel Nicolas (2022-03)
    Layer Pressing in Concrete Extrusion-Based 3D Printing:
    Experiments and Analysis
  45. Gebhard Lukas, Burger Joris, Mata-Falcón Jaime, Lloret-Fritschi Ena et al. (2022-03)
    Towards Efficient Concrete Structures with Ultra-Thin 3D Printed Formwork:
    Exploring Reinforcement-Strategies and Optimization
  46. Nguyen-Van Sy, Gwak Kwan-Woong (2022-03)
    A Two-Nozzle Cable-Driven Parallel Robot for 3D Printing Building Construction:
    Path-Optimization and Vibration Analysis
  47. Stieler David, Schwinn Tobias, Menges Achim (2022-03)
    Volumetric Intersections:
    Modularization Approaches for Freeform Prefab Concrete Construction
  48. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-03)
    Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials:
    Correction
  49. Zhou Jiehang, Du Longyu, Lai Jianzhong, Wang Qiang et al. (2022-03)
    Preparation and High-Velocity Impact Experiment for Three-Dimensional-Printed Concrete