Skip to content

#material

Keywords by Co - Occurrence

  1. Gencel Osman, Er Yusuf, Güler Onur, Ustaoğlu Abid et al. (2026-01)
    Replacing Natural Aggregates with Phase Change Material-Based 3D Printed Aggregates in Concrete for Structural Function and Dual Thermal Energy Storage
  2. Kechagia Aikaterini, Tzounis Lazaros, Kechagias John (2026-01)
    3D Printing Concrete:
    A Short Review of Systems and Materials
  3. Dubey Pratik, Maurya Madan (2026-01)
    A Comprehensive Review of 3D Printing in Construction:
    Technology, Materials, and Digital Workflow
  4. Melero-Tur Sofía, Jiménez-Guerrero Adriano, Pérez-Fenoy José, Barbero-Barrera María (2026-01)
    Re-Imagining the Production of 3D Printed Ceramics Through the Incorporation of Waste Materials
  5. Aden Abdishukri, Nuñez Montoya Alejandra, Ponce Josef, Rangel Bárbara et al. (2026-01)
    FAB-BIO:
    A Review of Bio-Based Materials Applied on 3D-Printed Living Walls
  6. Reis Rui, Aroso Francisca, Brandão Filipe, Camões Aires et al. (2026-01)
    A Systematic Review on the Durability of 3D-Printed Cementitious Materials:
    Insights and Research Challenges
  7. Mechtcherine Viktor, Gleiser Leonie (2026-01)
    Back to Earth:
    Building the Future with an Ancient Material
  8. Hechtl Christian, Dahlenburg Maximilian, Bos Freek, Kränkel Thomas et al. (2025-12)
    Adaptive-Binder-Aggregate Mixing (ABAM):
    Concept for Extrusion-Based Multi-Material 3D Concrete Printing
  9. Paul Suvash, Lee Junghyun, Tay Yi, Amr Issam et al. (2025-12)
    Developing Sustainable 3D Printable Concrete Materials Using Olivine Sand for Carbon Sequestration
  10. Rodriguez Fabian, Vugteveen Caiden, Fross Xavier, Wei Hui et al. (2025-12)
    3D Printing of Cement-Based Materials Using Seawater for Simulated Marine Environments
  11. Deetman Arjen, Suiker Akke (2025-12)
    Characterization of Early-Age Elastic–Plastic Properties of 3D Printed Materials Using Indentation Testing
  12. Muñoz-Sanguinetti Claudia, Vega-Coloma Mabel, Letelier Viviana, Marrero Madelyn et al. (2025-12)
    Environmental Footprint of 3D-Printed Concrete Using Recycled Materials
  13. Basith Mydeen Pitchai Mohamed Abdul (2025-12)
    Polymer-Enhanced Composites for 3D Concrete Printing:
    A Review of Materials, Processes, and Performance
  14. Cárdenas Valeria, Vargas Juan, Fantucci Stefano (2025-12)
    Topological Optimization and Material Exploration for Improving the Thermal Performance of 3D Printed Prefabricated Wall Components
  15. Latorraca Tássia, Rangel Bárbara, Guimarães Ana (2025-12)
    Optimizing 3D-Printed Concrete Panels’ Thermal Performance with Materials, Metrics, and Generative Design
  16. Huang Qunyi, Huang Qingyu, Yang Hong, Zhang Jiahang et al. (2025-12)
    Research on the Workability of 3D Printed Fiber-Reinforced Concrete Materials
  17. Yan Yufei, Zhang Mo, Ma Guowei (2025-12)
    Synergistic Effect of Multi-Supplementary Materials on Rheology and Ultra-Early Stage Properties of 3D Printable FA-GBFS Geopolymer
  18. Hurtig Karel, Čítek David, Holý Milan, Koteš Peter et al. (2025-12)
    Experimental Assessment of Durability in 3D Printed Cementitious Materials
  19. Baharlou Ehsan, Datta Ipsita, Ozbulut Osman (2025-12)
    Feasibility of 3D Printing Oyster Shell Waste Laden Hydrogel Inks for Developing Mycelium Composite in Architectural Materials
  20. Ferrara Liberato, Rizzieri Giacomo, Cremonesi Massimiliano (2025-12)
    A Particle Fluid Dynamics Modelling Approach to Design 3D Concrete Printing Materials and Processes
  21. Gaudillière-Jami Nadja (2025-12)
    A Critical Materials Perspective on 3DCP
  22. Xu Fengming, Yu Jie, Teng Fei, Lin Xiaoshan et al. (2025-12)
    Application of Recycled Tile as Internal Curing Material in 3D-Printed Engineered Cementitious Composites
  23. Kloft Harald (2025-12)
    Digital Building Fabrication – The Path Towards the Unity of Material, Process and Form:
    A Personal Reflection from Research and Practice
  24. Cheng Zhangqi, Li Keyan, Liu Renlong (2025-12)
    Sustainable 3D Printed Engineered Cementitious Composites Incorporating Recycled Ceramic Materials:
    Rheology and Mechanical Behavior
  25. Liu Xuelin, Kong Jiafeng, Chen Yidong, Wang Liang et al. (2025-12)
    Rheology and Printability Control of Low-Carbon 3D-Printed Cementitious Materials via Circular Use of Recycled Concrete Powder
  26. Feng Xiaowei, Carvelli Valter, Pan Dongjiang, Zhu Chuankai et al. (2025-12)
    Additive Manufacturing of Hybrid Straw-Soil-Cement Materials for Enhanced Mine Models
  27. Alnaggar Mohammed (2025-12)
    Large Format Additive Manufacturing with Cementitious and Geo Materials:
    General Considerations, Drivers, and Context
  28. Saravanan Pradeep, Ramaswamy Ananth (2025-11)
    Modelling Buildability Performance of 3D Printable Cementitious Materials Using Chemo-Mechanical Model
  29. Yu Hao, Zhang Weiwei, Liew Jia, Yin Binbin et al. (2025-11)
    Simulating Material Flow and Extrusion Dynamics in 3D Concrete Printing
  30. Geng Renyu, Jiang Jinming, Du Pengcong, Zhang Huiliang et al. (2025-11)
    Multiscale Thermal Optimization of 3D-Printed Walls:
    Integrating Structure, Material, and Process with Fire-Thermal Synergy
  31. Meier Niklas, Herding Friedrich, Zetzener Harald, Mai (née Dressler) Inka et al. (2025-11)
    Surface Modification of Bulk Material for Particle Bed 3D Concrete Printing:
    Effect on Wettability, Porosity, and Mechanical Properties
  32. Oh Sangwoo, Lee Jinsuk, Oh Gyujong, Choi Seongcheol (2025-11)
    Effects of the Combined Incorporation of Superabsorbent Polymers and Polyvinyl Alcohol Fibers on Material Properties of 3D Printable Mortar:
    Rheology, Shrinkage, and Mechanical Behavior
  33. Abidi Imene, Tuna Meral, Carboni Biagio, Trovalusci Patrizia (2025-11)
    A Parametric Study on Topology Optimization of Additively Manufactured Clay Materials
  34. Maroszek Marcin, Rudziewicz Magdalena, Shah Syed, Tran Doan et al. (2025-11)
    Development of Eco-Friendly Construction Materials for 3D Printing Using Fly Ash and Demolition Waste
  35. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-11)
    Influence of Alternative Supplementary Cementitious Materials and Printing Parameters on the Mechanical Properties of 3D-Printed Mortars
  36. Türk Ayşe, Türk Furkan, Edebali Serpil, Keskin Ülkü (2025-11)
    3D Printable Mortars with Green Materials:
    Sustainable Solutions with Nanocellulose
  37. Faleschini Flora, Trento Daniel, Zanini Mariano (2025-11)
    Earth as a Building Material:
    From Traditional Building Techniques to Additive Manufacturing
  38. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
    Durability Assessment of 3D Printed Cement-Based Materials:
    A RILEM TC 304-ADC Interlaboratory Study
  39. Valeri Manuela, Sangiorgio Valentino, Cantagallo Christina (2025-10)
    From Traditional Materials to Geopolymers:
    History, Performance, Sustainability and 3D Printing Applications
  40. Ding Yong, Kindler Robert, Cen Tianyu, Chen Xiulin et al. (2025-10)
    Valorization of Demolition Waste and Biomass Byproduct into Sustainable Building Materials via Carbon Mineralization and 3D Printing
  41. Shang Yuqing, Yu Zheming, Ma Wei, Wei Jun et al. (2025-10)
    Research on 3D Printing Materials and Printing Parameters of Basalt Fiber Reinforced Concrete
  42. Gajjar Parth, Gajjar T., Tangirala Aniruddha, Shrestha Ajad (2025-10)
    Advancing 3D Printing in Construction:
    Rheological Behaviors of Cementitious Composites with Supplementary Materials
  43. Ball Richard, Dams Barrie, Shepherd Paul, Chen Binling (2025-10)
    Exploring Aerial Additive Manufacturing with Cementitious Materials Using Autonomous Drones
  44. Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2025-10)
    Dual Strategies for Enhancing Carbonation Curing in 3D Printing Steel Slag Mortars:
    Material Modification and Curing Process Innovation
  45. Tanaka Shunsei, Yoshida Kohei, Yamamoto Yujin, Kinomura Koji (2025-10)
    Numerical Evaluation on Buildability of 3D Printing Mortar Based on Time-Dependent Material Model
  46. Teng Fei, Yang Minxin, Yu Jie, Weng Yiwei et al. (2025-10)
    Multi-Material 3D Concrete Printing:
    Automated Hybrid Reinforcements Using Textile and Strain-Hardening Cementitious Composites
  47. Lange David, Shen Chuanyue (2025-10)
    Modeling the Fresh Properties of Cement-Based Materials for 3D Concrete Printing
  48. Li Haodao, Khayat Kamal (2025-10)
    Performance-Based Design of 3D Printable Cement Composite Using Locally Available Materials
  49. Mahmood Ali, Nanos Nikos, Begg David, Dhakal Hom (2025-10)
    Recycled Waste Materials Utilised in 3D Concrete Printing for Construction Applications:
    A Scientometric Review
  50. Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph, Hüsken Götz (2025-09)
    Investigating the Impact of Material Rheology on Geometric Accuracy in 3D Concrete Printing Using Real-Time Monitoring
  51. Sun Hou-Qi, Zeng Jun-Jie, Xie Shan-Shan, Xia Jun-Run et al. (2025-09)
    Mechanical and Microstructural Characterization of Interlayer Bonding in Multi-Material 3D-Printed Concrete
  52. Maroszek Marcin, Rudziewicz Magdalena, Rusin-Żurek Karina, Hager Izabela et al. (2025-09)
    Recycled Materials and Lightweight Insulating Additions to Mixtures for 3D Concrete Printing
  53. Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
    Layer Interface in 3D Printed Cement-Based Materials:
    Heterogeneous Phase Distribution and New Insights into Formation Mechanism
  54. Elhag Ahmed, Mabrouk Abdelkader, Ghazouani Nejib, Nasir Umara (2025-09)
    Advances in Sustainable 3D-Printed Geopolymer Concrete:
    Materials, Performance, and Environmental Impact in Next Generation Green Construction
  55. Kim Ki-Yeol, Lim Dong-Kyu, Choi Myoungsung (2025-09)
    Comparison of Pumping Mechanism for Various Cementitious Materials
  56. Yousaf Arslan, Rashid Ans, Koç Muammer (2025-09)
    Additive Manufacturing for Vernacular Architecture Using Local Earthen Soil and Bio-Waste Materials
  57. Kim-Tackowiak Hajin, Carstensen Josephine (2025-09)
    Topology Optimization of 3D-Printed Material Architectures:
    Testing Toolpath Consideration in Design
  58. Sabouni Reem, Martini Samer (2025-09)
    Characterization of 3D Printed Concrete Mixtures Developed Using Local UAE Materials Based on Rheological Properties
  59. Gencel Osman, Nodehi Mehrab, Subaşı Serkan, Ustaoğlu Abid et al. (2025-09)
    Properties of 3D Printed Concrete Containing Microencapsulated Phase Change Material
  60. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun (2025-09)
    Development of Sustainable 3D Printing Concrete Materials:
    Impact of Natural Minerals and Wastes at High Replacement Ratios
  61. Mousavi Moein, Rangaraju Prasad (2025-09)
    Freeze-Thaw Durability of 3D Printed Concrete:
    A Comprehensive Review of Mechanisms, Materials, and Testing Strategies
  62. Li Fuhai, Xiao Sai, Yang Bo, Li Kepu et al. (2025-09)
    Mechanical Properties and Anisotropy of 3D-Printed Concrete Modified with Multiscale Materials Based on Optimized Printing Process Design
  63. Marco Giancarlo, Cheung Lok (2025-09)
    Multimodal Large Language Models for Adaptive 3D Concrete Printing:
    Real-Time Control of Materials and Settings According to Performance Requirements and Environmental Conditions
  64. Bhagat Rajesh, Pande Prashant, Madurwar Kamlesh, Raut Jayant et al. (2025-09)
    Life Cycle Assessment of 3D-Printed Building Materials Towards Sustainability-Driven Optimization and Environmental Impact Analysis Using Computational Intelligence Techniques
  65. Rabiei Mahsa, Moini Mohamadreza (2025-09)
    Extrusion Under Material Uncertainty with Pressure-Based Closed-Loop Feedback Control in Robotic Concrete Additive Manufacturing
  66. Ghodke Swapnil, Singh Arshdeep, Singh Bhupinder, Chowdhury Shubhankar (2025-08)
    Additively Manufactured Smart Materials and Structures in Construction and Building Applications
  67. Ozturk Onur, Lunsford Caleb, Strait James, Nair Sriramya (2025-08)
    Breaking Barriers in Underwater Construction:
    A Two-Stage 3D Printing System with On-Demand Material Adaptation
  68. Zhou Yuecheng, Xiao Sai, Li Haonian, Wang Chong et al. (2025-08)
    Study on the Rheological Properties and Printability of Multi-Scale Material Modified Mortar for 3D Printing
  69. Wang Cheinfei, Lian Junyin, Fang Yunhui, Fan Guangming et al. (2025-08)
    Rheological Optimization of 3D-Printed Cementitious Materials Using Response Surface Methodology
  70. Bradford Katy, Gentry Russell, Alon Lola, Kurtis Kimberly (2025-08)
    Construction 3D Printing Material Selection:
    Minimizing Cost and Carbon Footprint of Residential Wall Assemblies
  71. Maroszek Marcin, Hager Izabela, Mróz Katarzyna, Sitarz Mateusz et al. (2025-08)
    Anisotropy of Mechanical Properties of 3D-Printed Materials:
    Influence of Application Time of Subsequent Layers
  72. Liu Zhixin, Si Liang, Liu Yebao, Li Mingyang et al. (2025-08)
    Optimization of Printing Parameters Based on Computational Fluid Dynamics for Uniform Filament Mass Distribution at Corners in 3D Cementitious Material Printing
  73. Yang Xia, Wang Jiuyuan, Huang Han, Wu Gengchen et al. (2025-08)
    Anti-Washout Cement-Based Material for Under-Seawater 3D Concrete Printing:
    Design, Mechanical Properties and Microstructural Analysis
  74. Wagner Gabriel, Silva João, Ribeiro João, Figueiredo Bruno et al. (2025-08)
    A Novel and Flexible Approach to Modeling the Additive Manufacturing Extrusion of Cementitious Materials
  75. Siqueira Neto Luiz, Isgor Burkan, Weiss William (2025-08)
    Modeling Fluid Absorption in Layered Anisotropic Cement-Based Materials
  76. Pan Keheng, Cheng Yinhan, Qu Guangfei, Yuan Zheng et al. (2025-07)
    Development and Optimization of Geopolymer-Based 3D Printing Materials Utilizing Industrial Solid Waste:
    Rheological Properties and Practical Applications
  77. Yousaf Arslan, Khan Shoukat, Koç Muammer (2025-07)
    Material, Process, and Design Optimization of Local Earthen Soil Reinforced with Natural Fiber Waste and Nanoclay for 3DP of Functional Structures
  78. Jin Yuan, Jiang Chengzhi, Gan Xingyu, Sun Zhaoyang et al. (2025-07)
    Enhancing the Printability of 3D Printed White Cementitious Materials with Accelerators:
    Evolution of Early-Age Hydration and Rheology
  79. Zafar Muhammad, Javadnejad Farid, Hojati Maryam (2025-07)
    Optimizing Rheological Properties of 3D Printed Cementitious Materials via Ensemble Machine Learning
  80. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2025-07)
    Squeeze Test:
    A Toolkit for Assessing the Printability of Stiff Cement-Based Materials.
  81. Chen Yanjuan, Cheikh Khadija, Rahier Hubert (2025-07)
    Methodology for the Design and Optimization of Potassium Silicate-Activated Slag Used as the Binder of 3D Printable Materials
  82. Wang Tongcai, Gu Guangshuai, Zhang Rihan, Cui Qianshun et al. (2025-07)
    Additive Manufacturing of Lunar Regolith via Resin-Based Binder and Material Extrusion Method for High-Performance In-Situ Manufacturing on the Moon
  83. Raza Muhammad, Kravchenko Ekaterina, Besklubova Svetlana, Lazorenko Georgy et al. (2025-07)
    3D Printing of Recycled Materials for Sustainable Construction:
    A Comprehensive Economic and Life Cycle Assessment
  84. Rizzieri Giacomo, Meni Simone, Cremonesi Massimiliano, Ferrara Liberato (2025-07)
    A Particle Finite Element Method for Investigating the Influence of Material and Process Parameters in 3D Concrete Printing
  85. Ali Syed, Haq Mohd, Khan Rizwan, Hashmi Ahmad (2025-07)
    A Comprehensive Review on 3D Printing of Concrete:
    Materials, Methods and Mechanical Properties
  86. Yang Jie, Xu Ke, He Haijie (2025-07)
    Materials, Performance Studies, and Application Progress of Fiber-Reinforced 3D-Printed Concrete
  87. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-06)
    Multiphysics Modelling of 3D Concrete Printing:
    From Material Model to Process Simulation and Optimisation
  88. Li Qiyan, Su Anshuang, Gao Xiaojian (2025-06)
    Improvement of Interlayer Performance of 3D Printable Magnesium Oxysulfate Cement-Based Materials by Carbonation Curing
  89. Alnemrawi Bara'a, Rousan Rajai, Abdalla Khairedin, Lagaros Nikos (2025-06)
    Evaluating the Structural Performance of 3D Printed FRCC Beams with Anchoring Reinforcement:
    Material, Geometry, and Loading Perspectives
  90. Liu Shun, Yang Xiaobin, Wu Jianing (2025-06)
    Damage Evolution Analysis of Cement-Based 3D Printing Similar Materials Under Different Cyclic Loading-Unloading Conditions
  91. Rousan Rajai, Alnemrawi Bara'a, Abdalla Khairedin, Awawdeh Najemaldeen et al. (2025-06)
    Mitigation of Energy Crisis Worldwide Using 3D-Printed Concrete with Phase Change Materials
  92. Najm Omar, Alhassan Mohammad (2025-06)
    Implementation of Brucite in Alkali-Activated Materials Intended for 3D Printed Structures:
    A Fractional Factorial Design Approach
  93. Jacquet Yohan, Kawashima Shiho, Spangenberg Jon (2025-06)
    Unveiling the Structural Build-up 3D Printable Cement-Based Materials:
    From Small Amplitude Oscillatory Shear (SAOS) To Extensional (SAOE) Rheological Workflows
  94. Girskas Giedrius, Kligys Modestas (2025-06)
    3D Concrete Printing Review:
    Equipment, Materials, Mix Design, and Properties
  95. Lamb Bannon, Sabih Gauhar (2025-06)
    Advancements in 3D Concrete Printing Materials
  96. Jalil Siti Nur Natasha Abdul, Rizal Alias Ahmad, Alias Aizat (2025-06)
    Challenges and Strategies in Implementing 3D Concrete Printing (3DCP) Technology in Malaysia:
    Materials and Design Codes
  97. Gupta Souradeep, Sahana C., Soda Prabhath, Dwivedi Ashutosh (2025-06)
    Development of Carbon Sequestering 3D-Printable Stabilized Earth Materials:
    Investigation into Engineering Performance and Resistance Against Acid Attack
  98. Hopkins Ben, Si Wen, Khan Mehran, McNally Ciaran (2025-06)
    Recent Advancements in Polypropylene Fiber-Reinforced 3D-Printed Concrete:
    Insights into Mix Ratios, Testing Procedures, and Material Behaviour
  99. Mohamed Osama, Mishra Anamika, Isam Fida (2025-05)
    An Overview of 3D Printed Concrete for Building Structures:
    Material Properties, Sustainability, Future Opportunities, and Challenges
  100. Bhowmik Anirban, Bhattacharjee Biswajoy, Sahu Prakash (2025-05)
    A Comprehensive Analysis on Material Properties and Specialized Applications in 3D Concrete Printing
  101. Chippagiri Ravijanya, Lanjewar Bhagyashri, Kamath Muralidhar, Ralegaonkar Rahul (2025-05)
    Prediction of Construction Materials for Conventional and Alkali-Activated 3D Concrete Printing
  102. Niroumand Hamed, Bałachowski Lech (2025-05)
    Green Building with 3D Printed Earth Materials:
    Current Issues and Future Prospects of 3D Printed Green Houses for the Construction Sector
  103. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhang Yunsheng et al. (2025-05)
    Rheological Performance Regulation and Material Optimization of Manufactured Sand Concrete in 3D Printing
  104. Das B., Prathap Y., Sandeep Ankit, Vaghamshi Keval et al. (2025-05)
    Reviewing the Materials Selection, Rheology, Durability, and Microstructural Characteristics of 3D Printed Concrete
  105. Mishra Sanjeet, Snehal K., Das B., Chandrasekaran Rajasekaran et al. (2025-05)
    From Printing to Performance:
    A Review on 3D Concrete Printing Processes, Materials, and Life Cycle Assessment
  106. Hashimoto Katsufumi, Nakase Kota, Yoshihara Rei, Honda Yoshiki et al. (2025-04)
    Evaluation and Investigation of Material and Mechanical Property of 3D Printed Concrete by Means of Non-Destructive Testing Methods
  107. Xia Kailun, Chen Yuning, Chen Yu, Jia Lutao et al. (2025-04)
    Programmable Toughening for 3D Printed Concrete and Architected Cementitious Materials
  108. Qiao Zhigang, Li Hui, Wang Fei, Qi Yongle et al. (2025-04)
    Optimizing Thermal Energy Storage in 3D Printed Concrete with Hollow Ceramsite Composite Phase Change Materials
  109. Huang Jianxiang, Wang Caifeng, Jian Shouwei, Tan Hongbo et al. (2025-04)
    Feasibility of Applying Attapulgite, Sodium Bentonite and Nano-Silica as a Viscosity Modifier Admixture for 3D Printing of Gypsum-Based Materials
  110. Li Mo, Wu Yun-Chen, Wang Xinbo (2025-04)
    Fracture Behavior of Additively Manufactured Cementitious Materials
  111. Teng Fei, Ye Junhong, Yu Jie, Weng Yiwei (2025-04)
    Multi-Material Printing to Simultaneously Enhance Interlayer and Flexural Performance in 3D Concrete Printing
  112. Thomsen Mette, Nicholas Paul, Chiujdea Ruxandra-Stefania, Nielsen Stine et al. (2025-04)
    Additive Manufacturing for Repair:
    Continual Construction Through Bio-Based Materials
  113. Liu Junli, Hai Hoang, Tran Mien, Tran Jonathan (2025-04)
    Advancing Microstructural Insights in 3D-Printed Cementitious Materials via X-Ray Micro-Computed Tomography
  114. Noaimat Yazeed, Chougan Mehdi, Seidy Eslam, Albar Abdulrahman et al. (2025-04)
    Optimizing Limestone Calcined Clay Cement for Enhanced 3D Printing Performance of Low-Carbon Materials
  115. Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
    Optimizing 3D Geopolymer Concrete for Sustainable Construction:
    A Review of Material Selection, Printing Methods, and Properties
  116. Zhang Ziqi, Pan Tinghong, Guoa Rongxin, Lin Runsheng et al. (2025-04)
    Simulation and Analysis of Material Stacking and Migration Induced by Extrusion Behavior in 3D Printed Concrete
  117. Pederson Federico, Ellersick Liam, Kim Heejeong (2025-04)
    A Review of Lunar Regolith Based Alkali Activated Materials and Sintered Regolith for Use as a Construction Material
  118. Nieświec Martyna, Chajec Adrian (2025-03)
    Effect of Materials on the Properties of Fresh Cementitious Composites for 3D Printing:
    Short Review
  119. Nassrullah Ghaith, Ali Mohd, Rub Rashid, Cho Cung-Suk et al. (2025-03)
    Optimizing Cement-Based Material Formulation for 3D Printing:
    Integrating Carbon Nanotubes and Silica Fume
  120. Meyuhas Ohad, Larianovsky Pavel, Bentur Arnon, Magdassi Shlomo et al. (2025-03)
    Methods for Earth-Based Falsework in Multi-Material Additive Manufacturing at an Architectural Scale
  121. Miri Zahra, Baaj Hassan, Polak Maria (2025-03)
    3D-Printed Concrete Bridges:
    Material, Design, Construction, and Reinforcement
  122. Gleiser Leonie, Mechtcherine Viktor (2025-03)
    3D-Druck mit Lehm:
    Interaktion von Material und Maschine
  123. Silveira Júnior Jairon, Sakata Rafael, Onghero Lucas, Matos Paulo et al. (2025-03)
    Al-Anodizing Waste as a Supplementary Cementitious Material for 3D-Printed Portland Cement
  124. Liu Xiongfei, Guo Pei, Wang Haonan, Zhang Yi (2025-03)
    Spray-Based 3D Printed Cementitious Electromagnetic Wave Absorption Materials:
    Optimization with Structures Design
  125. Akhrif Iatimad, Oulkhir Fatima, Jai Mostapha, Rihani Nadir et al. (2025-03)
    Earth-Based Materials 3D Printing, Extrudability and Buildability Numerical Investigations
  126. Li Yifan, Chen Shuisheng, Yang Liuhua, Guo Chuan et al. (2025-02)
    Investigation of the Impact of Material Rheology on the Interlayer Bonding Performance of Solid Waste 3D-Printed Components
  127. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-02)
    Permeability and Electrical Resistivity of 3D-Printed Mortars Using Local Materials (Zeolite, Calcined Clay, and Mussel Shell Powder):
    Aotearoa, New Zealand
  128. Bayat Hamid, Kashani Alireza (2025-02)
    Reducing Material and Energy Consumption in Single-Story Buildings Through 3D-Printed Wall Designs
  129. Sangiorgio Valentino, Bianchi Iacopo, Forcellese Archimede (2025-02)
    Advancing Decarbonization Through 3D Printed Concrete Formworks:
    LIFE Cycle Analysis of Technologies, Materials, and Processes
  130. Fediuk Roman, Amran Mugahed, Pavlík Zbyšek (2025-02)
    Editorial:
    Special Issues for “Emerging Materials for 3D Printing in Construction”
  131. Khan Shoukat, Koç Muammer (2025-01)
    Advancements in Additively Manufactured Safety Materials:
    Energy-Efficient 3D Printing Solutions for Critical Infrastructure
  132. Wang Yibo, Yan Ming, Yang Kun, Ao Chenyang et al. (2025-01)
    Effect of Wall-Slip on the Extrusion-Characteristics of 3D Printing of Cementitious Materials
  133. Guan Jingyuan, Wang Li, Wan Qian, Ma Guowei (2025-01)
    Material and Structural Fatigue-Performance of 18m Span Reinforced Arch Structure Manufactured by 3D Printing Concrete as Permanent Formwork
  134. Pierre Alexandre, Perrot Arnaud (2025-01)
    Alternative Printing-Methods for Cementitious Materials
  135. Nadi Mouad, Majdoubi Hicham, Haddaji Younesse, Bili Oumaima et al. (2025-01)
    Digital Fabrication Processes for Cementitious Materials Using Three-Dimensional 3D Printing Technologies
  136. Oulkhir Fatima, Rihani Nadir, Akhrif Iatimad, Jai Mostapha (2025-01)
    Integration of Earth-Based Materials in 3D Concrete Printing:
    Physico-Chemical and Technological Characterization
  137. Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
    Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
    From Material-Design to Structural Bearing-Capacity-Assessment
  138. Alam Shaurav, Gordon Stephen, Bassett Blake, Cobb Kevin et al. (2025-01)
    Three-Dimensional Printing of Fly-Ash-Based Geopolymer Materials
  139. Richter Christiane, Maurer Christian, Jungwirth Jörg (2025-01)
    Reinforcement-Strategies for Additively Manufactured Concrete Elements:
    Exploring the Potential of Different Reinforcement-Materials for Selective Cement-Activation
  140. Souza Eduarda, Rodrigues e Silva Rafaela, Ribeiro Borges Paulo (2025-01)
    Overburden Materials from the Iron Mining as Raw Materials for AAM:
    Preliminary Assessment of Mixes for 3D Concrete Printing
  141. Omur Tarik, Akpunar Ahmet, Bingöl Ayşe, Oktay Büşra et al. (2025-01)
    The Influence of Phase-Change-Material Filled Three-Dimensional Printed Artificial Aggregates on the Properties of Blast-Furnace-Slag Based Alkali-Activated Concrete
  142. Zhao Zhihui, Cai Xianhuan, Chen Fan, Gong Yongfan et al. (2024-12)
    Effect of Wollastonite-Content on Rheology and Mechanical Properties of 3D Printed Magnesium-Potassium-Phosphate-Cement-Based Material of MgO-SiO2-K2HPO4
  143. Liu Junxing, Li Peiqi, Piao Taiyan, Im Sumin et al. (2024-12)
    High-Alumina Cementitious Materials for Binder-Jetting 3D Printing:
    Exploring Suitable Mixing-Ratio and Curing-Solution for Improving Mechanical Properties and Hydration-Reaction
  144. Shilton Robert, Wang Shen, Banthia Nemkumar (2024-12)
    Use of Polysaccharides as a Rheology-Modifying-Admixture for Alkali-Activated Materials for 3D Printing
  145. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-12)
    Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing Technology:
    Corrigendum
  146. Luo Surong, Li Wenqiang, Cai Yili, Zhang Kaijian (2024-12)
    Effects of Carbonated Recycled Sand on the Interfacial Bonding Performance of 3D Printed Cement-Based Material
  147. Wang Qingwei, Han Song, Liu Qi, Yang Junhao et al. (2024-12)
    Research on the 3D Printing Process and Filament Shape of Cementitious Materials in Low Gravity
  148. Irshidat Mohammad, Cabibihan John-John, Fadli Fodil, Ramahi Siraj et al. (2024-12)
    Waste Materials Utilization in 3D Printable Concrete for Sustainable Construction Applications:
    A Review
  149. Li Ben, Li Kaihang, Lyu Xuetao, Zhao Canhao et al. (2024-12)
    Microscopic Mechanism and Predicting Calculation on Mechanical Properties of Basalt-Fiber-Modified 3D Printing Cement-Based Materials
  150. Cruz Cynthia, Bosbach Sven, Kalthoff Matthias, Beckmann Birgit et al. (2024-12)
    Material-Minimized Rib and Honeycomb Slabs Made of Extruded Carbon-Reinforced Concrete Webs
  151. Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
    Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
    Materials, Engineered Properties and Techniques for Additive Manufacturing
  152. Medvedev Vyacheslav, Pustovgar Andrey, Adamtsevich Aleksey, Adamtsevich Liubov et al. (2024-11)
    Improving Inter-Layer Adhesion of Cementitious Materials for 3D Construction Printing
  153. Wang Lingyu, Zhang Yu, Wang Zhiyong, Chen Juan et al. (2024-11)
    Additive Manufacturing in Construction Using Unmanned Aerial Vehicle:
    Design, Implementation, and Material-Properties
  154. Wang Qingwei, Han Song, Yang Junhao, Li Ziang et al. (2024-11)
    Optimizing Printing and Rheological Parameters for 3D Printing with Cementitious Materials
  155. Kosson Michael, Brown Lesa, Thorne Garret, Sanchez Florence (2024-11)
    Influence of Internal Architecture and Ink Formulation on the Thermal Behavior of 3D Printed Cementitious Materials
  156. Heinze Lisa, Liebringshausen Anne, Eversmann Philipp (2024-11)
    3D Printing with Wood Waste:
    Development of Reusable Printing Material Based on Waste Wood Particles and Its Digital Manufacturing Process for Wall Constructions in Architecture
  157. Dams Barrie, Chen Binling, Kaya Yusuf, Shepherd Paul et al. (2024-11)
    The Rise of Aerial Additive Manufacturing in Construction:
    A Review of Material Advancements
  158. Reddy Swami, Shariff Najeeb, Nanthagopalan Prakash (2024-11)
    Topology-Optimization of 3D Concrete Printed Columns Considering Material-Anisotropy
  159. Wang Li, Lin Wenyu, Wan Qian, Li Zhijian et al. (2024-11)
    Manufacturing Accuracy Improvement of Concrete Product by Hybrid Additive-Subtractive Method Based on the Time-Dependent Characteristics of Cementitious Materials
  160. Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
    Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
  161. Lucas Sandra (2024-11)
    From 3D to 5D Printing:
    Additive Manufacturing of Functional Construction Materials
  162. Curth Alexander, Alvarez Eduardo, Sass Lawrence, Norford Leslie et al. (2024-11)
    Additive Energy:
    3D Printing Thermally Performative Building Elements with Low-Carbon Earthen Materials
  163. Fasihi Ali, Libre Nicolas (2024-10)
    Interaction Between Material and Process-Parameters During 3D Concrete-Extrusion-Process
  164. Neef Tobias, Görtzen Tom, Niemeyer Alice, Mechtcherine Viktor (2024-10)
    Material-Saving Concrete Ceiling Made from 3D-Printed Interlocking Blocks
  165. Peng Chengming, Yang Zhenjun, Li Hui (2024-10)
    A Predictive Model for Interlayer-Water-Evolution and Experimental Validation of 3D Printed Cementitious Materials
  166. Du Guoqiang, Qian Ye (2024-10)
    Bio-Inspired Innovations in 3D Concrete Printing:
    Structures, Materials and Applications
  167. Rahemipoor Sahand, Bayat Mohammad, Hasany Masoud, Mehrali Mohammad et al. (2024-10)
    Micro-Encapsulated Phase-Change-Material in 3D Printable Mortars
  168. Asaf Ofer, Larianovsky Pavel, Bentur Arnon, Sprecher Aaron (2024-09)
    Transforming Earths:
    Designing 3D Printable Materials for Robotic Earth Architecture
  169. Romani Alessia, Levi Marinella (2024-09)
    Large-Format Material-Extrusion Additive Manufacturing for Circular Economy Practices:
    A Focus on Product-Applications with Materials from Recycled Plastics and Biomass-Waste
  170. Lee Jae, Park Boo (2024-09)
    A Study on Eco-Friendly Materials for 3D Printing:
    Focused on Korean Hwangto(Loess)
  171. Rider Bo, Kurtis K., Stewart L. (2024-09)
    Quantification of Porosity and Sorptivity in Fiber-Reinforced 3D Printed Mortar:
    Connecting Material-Composition and Structural Performance
  172. Hlaváček Petr, Kolsch Nico, Zocca Andrea, Kühne Hans-Carsten et al. (2024-09)
    Additive Manufacturing of Alkali-Activated Materials by Laser-Induced Slip Casting
  173. Weger Daniel, Gartner Benjamin, Rausch Anne, Schießl-Pecka Angelika et al. (2024-09)
    Realization of a Reinforced SPI Façade:
    Direction-Dependent Material-Properties and Durability-Assessment
  174. Zhang Yi, Tittelboom Kim, Tao Yaxin, Zhang Yiyuan et al. (2024-09)
    Understanding Carbonation in 3D Printed Cement-Based Materials with Exposed Bottom Surface
  175. Farra Ramzi, Mazanec Oliver, Ducoulombier Nicolas, Mallet Alban (2024-09)
    Toward the Optimal Use of Local Cementitious Materials Through Novel Admixture-Technology and a Dedicated 2K-Printing-System
  176. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2024-09)
    Multi-Physics Modelling for Extrusion-Based 3D Printing:
    Material, Process and Applications
  177. Ivaniuk Egor, Reißig Silvia, Mechtcherine Viktor (2024-09)
    Automating Penetration Tests for Fresh 3D Printed Cementitious Materials
  178. Asensio Eloy, Fenàndez F., Cabello Z., Álvarez O. et al. (2024-09)
    Low-Clinker ECC Materials Using Biomass Ash for 3D Printing
  179. Noaimat Yazeed, Ghaffar Seyed (2024-09)
    Exploring Low-Carbon Cementitious Materials for 3D Printing Applications:
    A Comparison Between Limestone-Calcined-Clay-Cement and One-Part Alkai-Activated Material
  180. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-09)
    Effect of Strain-Hardening Material on Seismic-Performance of 3D Printed Concrete Wall:
    A Numerical Study
  181. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2024-09)
    Tailored Low-Carbon Footprint Cementitious Material for 3D Printing:
    Strategies for Rheology Adjustment and Mechanical Performance Estimation
  182. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2024-09)
    Material-Volume Reduction with Additive Manufacturing:
    Challenges for Structural Application
  183. Gosslar Joschua, Dorresteijn Evelien, David Martin, Leusmann Thorsten et al. (2024-09)
    Digital Fabrication with Local Earthen Materials:
    The Relevance of Process Robustness
  184. Barry Mamadou, Jacquet Yohan, Kachkouch Fatima, Perrot Arnaud (2024-09)
    Instrumentation of the Extruder Nozzle Using Load Cells:
    Towards an In-Line Quality-Control Device for 3D Printed Cement-Based Materials
  185. Rudolph Jennifer, Lowke Dirk (2024-09)
    Design and Characterisation of a Two-Component Mortar-System for Shotcrete 3D Printing:
    An Approach to the Targeted Control of Material-Properties
  186. Hlaváček Petr, Wolf Christoph, Robens-Radermacher Annika, Kühne Hans-Carsten (2024-09)
    Powder-Bed 3D Printing of Cementitious Materials for Lightweight Construction Elements
  187. Jacquet Yohan, Spangenberg Jon, Perrot Arnaud (2024-09)
    Exploring Viscosity and Friction Through Temperature:
    Understanding Self-Heating Dynamics of Non-Newtonian 3D Printable Construction Materials via CFD Modeling
  188. Kul Anil, Kocaer Öznur, Lucas Sandra (2024-09)
    Anisotropic Characteristics of 3D Printed Geopolymer Mortars from End-of-Life Materials of Construction Industry
  189. Jacquet Yohan, Maierdan Yierfan, Kawashima Shiho, Perrot Arnaud (2024-09)
    Stability-Prediction of 3D Printable Fresh Construction Materials by Analyzing Thixotropic Compressive Properties Using Extensional Dynamic Mechanical Analysis
  190. Chen Yu, Zhang Yamei, Schlangen Erik, Çopuroğlu Oğuzhan (2024-09)
    Development of Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Desalination Brine
  191. Márquez Álvaro, Ramallo Laura, Varela Hugo, Barluenga Gonzalo et al. (2024-09)
    3D Printing Architectural Applications of Cement-Lime Mortars with Microencapsulated Phase-Change-Material
  192. Jiang Yu, Tabbaa Abir, Daly Ronan (2024-09)
    Effects of Time-Dependent Rheological Properties of Cementitious Materials on the Print Quality of Extrusion-Based 3D Printing
  193. Jacquet Yohan, Perrot Arnaud (2024-09)
    Hygroscopic Insulation of Open Matrix Core Wall System as a Strategy to Enhance Buildability of 3D Printed Earth-Based Materials Structures
  194. Rehman Atta, Kang Manmin, Basha Shaik, Choi Kichang et al. (2024-09)
    Knife-Cut-Test of Concrete:
    The Introduction of a New Test-Method for Measurement of the Structural Build-Up of 3D Concrete Printing-Materials
  195. Jenny David, Gramazio Fabio, Kohler Matthias (2024-09)
    Reimagining Earthen Materials:
    The New Era of Sustainable and Digital Construction
  196. Ma Liangzhu, Yin Deshun, Ren Jiangtao, Tian Mingyuan et al. (2024-09)
    An Effective Thixotropic Structural-Dynamics Rheological-Model for 3D Printed Concrete Materials in the Flow-State
  197. Ting Guan, Tay Yi, Quah Tan, Tan Ming et al. (2024-09)
    Sustainable Support-Material for Overhang Printing in 3D Concrete Printing Technology
  198. Zhang Hongping, Duan Shuni, Hu Zhichao, Liu Litao et al. (2024-09)
    Evaluation of Plasticity and Determination of Deformation Index of 3D Printed Composite Cement-Based Materials
  199. Sovetova Meruyert, Kaiser Calautit John (2024-08)
    Thermal and Energy Efficiency in 3D Printed Buildings:
    Review of Geometric Design, Materials and Printing Processes
  200. Giacomobono Leonardo, Argenti Maria, Ferretti Elena, Paparella Giulio (2024-08)
    Three-Dimensional Printing with Earthen Materials:
    A Settlement-Scale Design Experience
  201. Jarabo Rocío, Fuente González Elena, García Calvo José, Carballosa Pedro et al. (2024-08)
    Nano-Crystalline-Cellulose to Reduce Superplasticizer-Demand in 3D Printing of Cementitious Materials
  202. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
    Snapshot on 3D Printing with Alternative Binders and Materials:
    Earth, Geopolymers, Gypsum and Low-Carbon Concrete
  203. Lo Tzu-Hsien, Liu Bosheng (2024-08)
    Overview of Injection Liquid Printing with Dredged-Based Material for Concrete Formwork
  204. Carcassi Olga, Maierdan Yierfan, Kawashima Shiho, Alon Lola (2024-08)
    Recyclability of Earth-Fiber Materials for 3D Printing
  205. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-08)
    Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing-Technology
  206. Carcassi Olga, Alon Lola (2024-08)
    Additive Manufacturing of Natural Materials
  207. Ahmad Lina, Jabi Wassim, Sosa Marco (2024-08)
    Non-Planar Robotic Printing of Earth-Based Material:
    A Case Study Using Cob-Like Mixture
  208. Zuo Wenqiang, Caneda-Martínez Laura, Keita Emmanuel, Aimedieu Patrick et al. (2024-08)
    Drying-Induced Damages in Exposed Fresh Cement-Based Materials at Very Early-Ages:
    From Standard Casting to 3D Printing
  209. Moini Mohamadreza, Rodriguez Fabian, Olek Jan, Youngblood Jeffrey et al. (2024-07)
    Mechanical Properties and Fracture Phenomena in 3D Printed Helical Cementitious Architected Materials Under Compression
  210. Huang Zili, Yang Weiyi, Verma Rupesh, Nguyen Giang et al. (2024-07)
    Application of Adelaide-University-Snapback-Indirect-Tensile-Test on 3D Printed Cement-Based Materials
  211. Liu Nana, Gan Qili, Tao Qin, Wang Jie (2024-07)
    Research on Materials for Concrete (Mortar) 3D Printing Fabricated Components
  212. Guihéneuf Simon, Audren Mathieu, Lely Nathan, Borgne Tangi et al. (2024-07)
    Monitoring and Modeling of Formwork Pressure Exerted by Castable Earthen Materials
  213. Liu Zhenbang, Li Mingyang, Liu Zhixin, Wong Teck (2024-07)
    Effects of Vinyl-Acetate and Ethylene-Copolymer on Printing and Mechanical Performances of 3D Printing Cementitious Materials
  214. Gleiser Leonie, Pierer Robin, Markin Slava, Butler Marko et al. (2024-07)
    Additive Manufacturing with Earth-Based Materials:
    Minimization of Shrinkage Deformation
  215. Lv Zhenyuan, Duan Zhenhua, Xiao Jianzhuang, Ji Guangchao (2024-07)
    Exploration of 3D Printed Concrete with Recycled Fine and Coarse Aggregates:
    Material, Equipment and Performance
  216. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2024-07)
    Granular Materials for 3D Printing of Construction Components and Structures
  217. Sahana C., Soda Prabhath, Dwivedi Ashutosh, Kumar Sandeep et al. (2024-07)
    3D Printing with Stabilized Earth:
    Material-Development and Effect of Carbon-Sequestration on Engineering-Performance
  218. Trento Daniel, Faleschini Flora, Masoomi Maryam, Pellegrino Carlo et al. (2024-07)
    Additive Manufacturing for Earth-Based Materials:
    An Experimental Investigation
  219. Shin Eun, Carcassi Olga, Maierdan Yierfan, Kawashima Shiho et al. (2024-07)
    Developing 3D Printed Natural Fiber-Rich Earth Materials in Construction
  220. Zhang Yi, Tittelboom Kim, Schutter Geert, Jiang Zhengwu (2024-07)
    Active Rheology-Control for 3D Printable Cement-Based Materials by Temperature:
    An Exploratory Study
  221. Tay Yi, Wang Lining, Wang Xiangyu, Quah Tan et al. (2024-07)
    Integration of Functional Materials into 3D Printing for Construction
  222. Tay Yi, Soh Eugene, Ferrand Hortense, Tan Ming (2024-07)
    3D Printing of Large-Scale Biodegradable Material
  223. Hanifa Mohamad, Daruari Harish, Figueiredo Bruno, Mendonça Paulo (2024-07)
    Embodied Carbon of Structural Earthen Composites with Natural Materials and Byproducts Suitable for Robotic 3D Printing
  224. Barve Prasad, Bahrami Alireza, Shah Santosh (2024-07)
    A Comprehensive Review on Effects of Material-Composition, Mix-Design, and Mixing-Regimes on Rheology of 3D Printed Geopolymer Concrete
  225. Shao Lijing, Liu Zhaolong, Liu Qi, Wang Haochuan et al. (2024-07)
    A New Strategy to Enhance 3D Printability of Cement-Based Materials:
    In-Situ Polymerization
  226. Parrott Brian, Coronado Preciado Angelica, Feron Eric (2024-07)
    Selective Sheet-Extrusion:
    A Novel Manufacturing-Process for Large-Format Material-Extrusion
  227. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
    Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete
  228. Wang Jun, Zhang Xuanzheng, Liu Zhenhua, Zhao Jiasheng (2024-07)
    Study on the Effects of Printing Process and Reinforcement Materials on the Performance of 3D-Printed Glass Bead Insulation Mortar
  229. Bong Shin, Du Hongjian (2024-06)
    Sustainable Additive Manufacturing of Concrete with Low-Carbon Materials
  230. Aslani Farhad, Zhang Yifan (2024-06)
    Sustainable 3D Printed Concrete Structures Using High-Quality Secondary Raw Materials
  231. Assunção Badan Julie, Chadha Kunaljit, Vasey Lauren, Brumaud Coralie et al. (2024-06)
    Contribution of Production Processes in Environmental Impact of Low-Carbon Materials Made by Additive Manufacturing
  232. Zhou Zhijie, Geng Jian, Jin Chen, Liu Genjin et al. (2024-06)
    Influence of Residue Soil on the Properties of Fly-Ash-Slag-Based Geopolymer Materials for 3D Printing
  233. Spencer Lawson, Genedy Moneeb, Strait James, Nair Sriramya et al. (2024-06)
    Concrete Gyroid:
    An Additive Manufacturing (AM) Method to 3D Print Gyroid Geometries with a Cementitious Material
  234. Parmigiani Silvia, Falliano Devid, Moro Sandro, Ferro Giuseppe et al. (2024-06)
    3D Printed Multi-Functional Foamed Concrete Building Components:
    Material-Properties, Component Design, and 3D Printing Application
  235. Čítek David, Hurtig Karel, Kolísko Jiří, Koteš Peter (2024-06)
    Cementitious Material Development for Additive Fabrication
  236. Melter Oto, Čítek David, Hvizdal Ales, Gabriel Michael et al. (2024-06)
    Development of a Robotic Fabrication System for Cementitious Materials
  237. Yan Kang-Tai, Wang Xian-Peng, Ding Yao, Li Lingzhi et al. (2024-06)
    3D Printed LC3-Based Lightweight Engineered Cementitious Composites:
    Fresh State, Hardened Material-Properties and Beam-Performance
  238. Li Haodao, Wei Jingjie, Khayat Kamal (2024-06)
    3D Printing of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials:
    From Mixture Design to Printability Evaluation
  239. Zhuang Zicheng, Xu Fengming, Ye Junhong, Hu Nan et al. (2024-06)
    A Comprehensive Review of Sustainable Materials and Tool-Path-Optimization in 3D Concrete Printing
  240. Čítek David, Hurtig Karel, Bureš Vladislav, Koteš Peter (2024-06)
    Cementitious Material Development for Additive Fabrication
  241. Matos Paulo, Prigol Hellen, Schackow Adilson, Silva Nazário Samara et al. (2024-06)
    Quality-Control-Tests of Fresh 3D Printable Cement-Based Materials
  242. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2024-05)
    Evaluating Clay Characteristics for Printable Geo-Materials:
    A Case Study of Clay-Sand Mixes
  243. Luo Surong, Li Wenqiang, Wang Dehui (2024-05)
    Study on Bending Performance of 3D Printed PVA-Fiber-Reinforced Cement-Based Material
  244. Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2024-05)
    Adhesion Performance of Alkali-Activated Material for 3D Printing of Tunnel Linings at Different Temperatures
  245. Wangler Timothy, Vangen Kathrina, Burger Joris, Flatt Robert (2024-05)
    Digital Fabrication Material-Processing-Strategy for Bespoke Low-Clinker Mass-Concrete Components
  246. Jiang Wei, Li Wenqian, Chen Xi (2024-05)
    An Extended Numerical Model of the First Exothermic Peak for Three Dimensional Printed Cement-Based Materials
  247. Vargas José, Sjölander Andreas, Westerlind Helena, Silfwerbrand Johan (2024-05)
    Internal Topology-Optimization of 3D Printed Concrete Structures:
    A Method for Enhanced Performance and Material-Efficiency
  248. Lin Xinbo, Shao Yajian, Ma Guowei, Wang Li (2024-05)
    A New 3D Printing Method and Similar Materials of the Tunnel-Lining for the Geomechanical Model-Test
  249. Lo Tzu-Hsien, Liu Bosheng (2024-04)
    Extruding Dredged-Based Material for Concrete Formwork through Rapid-Liquid-Printing
  250. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-04)
    Concrete 3D Printing Technology for Sustainable Construction:
    A Review on Raw Material, Concrete Type and Performance
  251. Lu Bing, Wang Lining, Wang Xiangyu, Tan Ming et al. (2024-04)
    Development of Robotic Sprayable Self-Sensing Cementitious Material for Smart Structural Health Monitoring
  252. Zaid Osama, Ouni Mohamed (2024-04)
    Advancements in 3D Printing of Cementitious Materials:
    A Review of Mineral Additives, Properties, and Systematic Developments
  253. Roux Charlotte, Archez Julien, Gall Corentin, Saadé Myriam et al. (2024-04)
    Towards Sustainable Material:
    Optimizing Geopolymer Mortar Formulations for 3D Printing
  254. Cutajar Sacha, Dielemans Gido, Krakovská Ema, Dorresteijn Evelien et al. (2024-04)
    Up-Scaling Earth Formworks:
    3D Printing-Strategies for Material-Optimized Reinforced Concrete Structures
  255. Radl Elisabeth, Pfleger Marc-Patrick, Karolyi Juliian, Vill Markus (2024-04)
    Specimen Design and Advanced Material-Testing for 3D Printing Concretes
  256. Calabrese Giuseppe, Hidding Arwin, Bier Henriette (2024-04)
    Review of Cementless Materials for 3D Printing of On- and Off-Earth Habitats
  257. Curth Alexander, Alvarez Eduardo, Feickert Kiley, Mueller Caitlin et al. (2024-04)
    Multi-Material Fabrication for Low-Carbon Construction:
    An Optimised Floor System for Affordable Housing in Mexico
  258. Abbaoui Khalid, Korachi Issam, Jai Mostapha, Šeta Berin et al. (2024-04)
    3D Concrete Printing Using Computational Fluid Dynamics:
    Modeling of Material-Extrusion with Slip-Boundaries
  259. Chamatete Kunda, Yalçınkaya Çağlar (2024-03)
    Numerical Evaluation on Thermal Performance of 3D Printed Concrete Walls:
    The Effects of Lattice-Type, Filament-Width and Granular-Filling-Material
  260. Carcassi Olga, Maierdan Yierfan, Akemah Tashania, Kawashima Shiho et al. (2024-03)
    Maximizing Fiber-Content in 3D Printed Earth Materials:
    Printability, Mechanical, Thermal and Environmental Assessments
  261. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
    Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
  262. Ali Mohd, Nassrullah Ghaith, Al-Rub Rashid, Khaswaneh Bashar et al. (2024-03)
    Influence of Carbon-Nano-Tubes on Printing Quality and Mechanical Properties of 3D Printed Cementitious Materials
  263. Gappmeier Peter, Reichenbach Sara, Kromoser Benjamin (2024-03)
    Advances in Formwork Automation, Structure and Materials in Concrete Construction
  264. Soda Prabhath, Dwivedi Ashutosh, Sahana C., Gupta Souradeep (2024-03)
    Development of 3D Printable Stabilized Earth-Based Construction Materials Using Excavated Soil:
    Evaluation of Fresh and Hardened Properties
  265. Zhang Yi, Ren Qiang, Dai Xiaodi, Tao Yaxin et al. (2024-03)
    A Potential Active Rheology-Control Approach for 3D Printable Cement-Based Materials:
    Coupling of Temperature and Viscosity-Modifiers
  266. Souza Eduarda, Ribeiro Borges Paulo, Stengel Thorsten, Nematollahi Behzad et al. (2024-03)
    3D Printed Sustainable Low-Cost Materials for Construction of Affordable Social Housing in Brazil:
    Potential, Challenges, and Research Needs
  267. Curth Alexander, Pearl Natalie, Castro-Salazar Angelica, Mueller Caitlin et al. (2024-03)
    3D Printing Earth:
    Local, Circular Material Processing, Fabrication Methods, and Life Cycle Assessment
  268. Wu Yun-Chen, Wang Xinbo, Li Mo (2024-03)
    Role of Thixotropy in Inter-Layer Microstructure and Properties of Additively Manufactured Cementitious Materials
  269. Robayo-Salazar Rafael, Vargas Armando, Martínez Fabio, Gutiérrez Ruby (2024-02)
    Utilization of Powders and Fine Aggregates from the Recycling of Construction and Demolition Waste in the 3D Printing of Portland-Based Cementitious Materials
  270. Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
    A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
    Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior
  271. İlcan Hüseyin, Özkılıç Hamza, Tuğluca Merve, Şahmaran Mustafa (2024-02)
    Inter-Layer Mechanical Performance of 3D Printed Cementitious Systems:
    A Comprehensive Study on Operational and Material Parameters
  272. Sun Yubo, Mohan Manu, Tao Yaxin, Zhang Yi et al. (2024-02)
    A Conceptual Design of Two-Stream Alkali-Activated Materials
  273. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-02)
    Concrete 3D Printing Technology in Sustainable Construction:
    A Review on Raw Materials, Concrete Types and Performances
  274. Moraes Maria, Nagata Ester, Duran Afonso, Rossignolo João (2024-02)
    Alkali-Activated Materials Applied in 3D Printing Construction:
    A Review
  275. Figueiredo Karoline, Hammad Ahmed, Haddad Assed (2024-02)
    Concluding Overview:
    Advancements in Building Materials Technology
  276. Gamage Kumari, Fawzia Sabrina, Zahra Tatheer, Teixeira Muge et al. (2024-02)
    Advancement in Sustainable 3D Concrete Printing:
    A Review on Materials, Challenges, and Current Progress in Australia
  277. Sergis Vasileios, Ouellet-Plamondon Claudiane (2024-02)
    Algorithmic Mix-Design for 3D Printing Materials
  278. Li Weihong, Chen Xuhao, Wang Yaoyu, Wan Detian et al. (2024-02)
    Effect of Embedded Filament Fibers on Mechanical Properties of 3D Printing Cement-Based Materials
  279. Li Yu, Wu Hao, Xie Xinjie, Zhang Liming et al. (2024-02)
    FloatArch:
    A Cable-Supported, Unreinforced, and Re-Assemblable 3D Printed Concrete Structure Designed Using Multi-Material Topology-Optimization
  280. Keita Emmanuel, Perrot Arnaud (2024-02)
    Processing of Earth-Based Materials:
    Current Situation and Challenges Ahead
  281. Moini Mohamadreza (2024-01)
    Perspectives in Architected Infrastructure Materials
  282. Sahai Rajan, Bisht Ravindra, Malviya Nitesh, Kumar Shivam et al. (2024-01)
    Aspects of Waste-Material-Utilization and 3D Concrete Printer Development-Approach:
    A Review
  283. Pavlin Majda, Horvat Barbara, Cerc Korošec Romana, Capuder Rok et al. (2024-01)
    Characterisation of a 3D Printed Alkali-Activated Material Based on Waste-Mineral-Wool at Room and Elevated Temperatures
  284. Wan Zhi, Xu Yading, He Shan, Schlangen Erik et al. (2024-01)
    The Use of Additive Manufacturing in Self-Healing Cementitious Materials:
    A State of the Art Review
  285. Chen Kailun, Liu Qiong, Chen Bing, Zhang Shishun et al. (2024-01)
    A Review on Effect of Raw Materials on the Performance of 3D Printed Geopolymer System for Construction
  286. Chadha Kunaljit, Dubor Alexandre, Cabay Edouard, Tayoun Yara et al. (2024-01)
    Additive Manufacturing for the Circular Built Environment:
    Towards Circular Construction with Earth-Based Materials
  287. Neri Manuela, Licciardello Lucia, Reggia Adriano, Pilotelli M. et al. (2024-01)
    Improving the Energy Performance of a 3D Printed Wall Using Recycled Material
  288. Rocha Douglas, Faria Paulina, Lucas Sandra (2023-12)
    Additive Manufacturing of Earth-Based Materials:
    A Literature Review on Mortar-Composition, Extrusion, and Processing Earth
  289. Khan Shayan, Ghazi Syed, Amjad Hassan, Imram Muhammad et al. (2023-12)
    Emerging Horizons in 3D Printed Cement-Based Materials with Nano-Material-Integration:
    A Review
  290. Böhler David, Freund Niklas, Mai (née Dressler) Inka, Lowke Dirk (2023-12)
    Shotcrete 3D Printing:
    Effect of Material‐Process-Interaction on the Global and Local Material Density
  291. Kalthoff Matthias, Cruz Cynthia, Raupach Michael, Matschei Thomas (2023-12)
    Material‐Minimized Construction with Extruded Textile-Reinforced Concrete
  292. Carvalho Ivo, Melo Abcael, Melo Carlos, Brito Mateus et al. (2023-12)
    Evaluation of the Effect of Rubber-Waste-Particles on the Rheological and Mechanical Properties of Cementitious Materials for 3D Printing
  293. Nóbrega Thiers, Henriques Gonçalo, Passaro Andres (2023-12)
    3D Printing for Architecture:
    Organic Integration of Algorithm, Machine and Material-Paste-Manufacture
  294. Chen Yu, Rahmani Hossein, Schlangen Erik, Çopuroğlu Oğuzhan (2023-11)
    An Approach to Develop Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Calcium-Nitrate
  295. Bosbach Sven, Kalthoff Matthias, Cruz Cynthia, Adam Viviane et al. (2023-11)
    Digital Prefabrication of Lightweight Building Elements for Circular Economy:
    Material-Minimised Ribbed Floor Slabs Made of Extruded Carbon Reinforced Concrete (ExCRC)
  296. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Youcef-Toumi Kamal et al. (2023-11)
    Adaptive Estimation and Detection of Filament-Width-Deviation During 3D Robotic Printing of Construction Materials
  297. Jauk Julian, Vašatko Hana, Gosch Lukas, Ristoski Kristijan et al. (2023-11)
    Coextrusion of Clay-Based Composites:
    Using a Multi-Material Approach to Achieve Gradient Porosity in 3D Printed Ceramics
  298. Imagawa Koichi, Ohno Motohiro, Ishida Tetsuya (2023-11)
    An Experimental Study on Energy-Absorption-Capability of Cast and 3D Printed Architected Cement-Based Materials
  299. Fiala Lukáš, Lin Wei-Ting, Hotěk Petr, Cheng An (2023-11)
    Feasibility Study of Developing Cementless Blended Materials as 3D Printable Materials
  300. Sangiorgio Valentino, Parisi Fabio, Graziano Angelo, Tina Giosmary et al. (2023-11)
    3D Printing of Viscous Materials in Construction:
    New Design Paradigm, from Small Components to Entire Structures
  301. Eversmann Philipp, Rossi Andrea (2023-11)
    Towards Construction 4.0:
    Computational Circular Design and Additive Manufacturing for Architecture Through Robotic Fabrication with Sustainable Materials and Open-Source Tools
  302. An Dong, Zhang Yixia, Yang Chunhui (2023-11)
    Numerical Modelling of 3D Concrete Printing:
    Material-Models, Boundary-Conditions and Failure-Identification
  303. Zhao Zengfeng, Ji Chenyuan, Xiao Jianzhuang, Yao Lei et al. (2023-11)
    A Critical Review on Reducing the Environmental Impact of 3D Printing Concrete:
    Material-Preparation, Construction-Process and Structure-Level
  304. Henschen Jacob, Blood Daniel, Kawashima Shiho, Kirkvold Heather (2023-11)
    Teaching Additive Manufacturing with Consideration for Cementitious Materials
  305. Zhang Xiaowei, Guo Chuwen, Ma Jianhong, Jiao Huazhe et al. (2023-10)
    Utilization of Solid Mine-Waste in the Building Materials for 3D Printing
  306. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2023-10)
    From Soil to Printed Structures:
    A Systematic Approach to Designing Clay-Based Materials for 3D Printing in Construction and Architecture
  307. Auer Daniel, Bos Freek, Olabi Mohammad, Fischer Oliver (2023-10)
    Fiber-Reinforcement of 3D Printed Concrete by Material-Extrusion-Tool-Paths Aligned to Principal Stress-Trajectories
  308. Noaimat Yazeed, Chougan Mehdi, Albar Abdulrahman, Skibicki Szymon et al. (2023-10)
    Recycled Brick-Aggregates in One-Part Alkali-Activated Materials:
    Impact on 3D Printing Performance and Material-Properties
  309. Singh Amardeep, Wang Yufei, Zhou Yiyi, Sun Junbo et al. (2023-10)
    Utilization of Antimony-Tailings in Fiber-Reinforced 3D Printed Concrete:
    A Sustainable Approach for Construction Materials
  310. Sun Houchao, Li Furong, Shi Feiting (2023-10)
    Experimental Study on Dynamic Mechanical Properties of 3D Printed Cement-Based Materials Under Splitting Tension After High Temperature
  311. Suryanto Benny, Higgins J., Aitken M., Tambusay Asdam et al. (2023-10)
    Developments in Portland Cement/GGBS Binders for 3D Printing Applications:
    Material-Calibration and Structural Testing
  312. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2023-09)
    Automatic Detection and Isolation of Filament-Width-Deviation During 3D Printing of Recycled Construction-Material
  313. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2023-09)
    Printability and Early Mechanical Properties of Material-Composition Modified 3D Printing Engineered Cementitious Composites Based on the Response-Surface-Methodology
  314. Jewett Jackson, Carstensen Josephine (2023-09)
    Topology-Optimization for Material-Extrusion-Based Additive Manufacturing-Processes with Weak Bead Bonding
  315. Cuevas Villalobos Karla, Weinhold Joachim, Stephan Dietmar, Kim Ji-Su (2023-09)
    Effect of Printing-Patterns on Pore-Related Microstructural Characteristics and Properties of Materials for 3D Concrete Printing Using In-Situ and Ex-Situ Imaging-Techniques
  316. Liu Zhenbang, Li Mingyang, Quah Tan, Wong Teck et al. (2023-09)
    Comprehensive Investigations on the Relationship Between the 3D Concrete Printing Failure Criterion and Properties of Fresh-State Cementitious Materials
  317. Rymeš Jiří, Červenka Jan, Jendele Libor (2023-09)
    Material-Modelling and Simulation of 3D Concrete Printing Process
  318. Christen Heidi, Zijl Gideon, Villiers Wibke, Moelich Migael (2023-09)
    Validated Simulation of Thermal Performance of Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
  319. Li Te, Tier Laire (2023-09)
    Analysis of the Effect of Glass-Powder on the Printability of Cement-Based Materials for 3D Printing Using ImageJ
  320. Hu Hailong, Huang Jian, Wang Tiezhu, Manuka Mesfin et al. (2023-09)
    Impact of Calcium Sulfoaluminate Cement on Printability and Early Strength Development of a Slag-Based 3D Printing Cementitious Material
  321. Ji Xuping, Pan Tinghong, Liu Xingyao, Zhao Wenhao et al. (2023-09)
    Characterization of Thixotropic Properties of Fresh Cement‐Based Materials
  322. Ji Yameng, Poullain Philippe, Leklou Ali (2023-09)
    The Selection and Design of Earthen Materials for 3D Printing
  323. Li Leo, Xiao Bofeng, Cheng Cong-Mi, Xie Hui-Zhu et al. (2023-09)
    Adding Glass-Fibers to 3D Printable Mortar:
    Effects on Printability and Material-Anisotropy
  324. Matos Ana (2023-09)
    Waste Marble Valorisation in 3D Cementitious Materials Printing
  325. Fernández Fernando, Jarabo Rocío, Asensio Eloy, Guerrero Ana (2023-09)
    Non-Destructive Tests to Evaluate the Self-Healing Capacity for a 3D Printing ECC Material
  326. Rudziewicz Magdalena, Maroszek Marcin, Góra Mateusz, Dziura Paweł et al. (2023-09)
    Feasibility Review of Aerated Materials Application in 3D Concrete Printing
  327. Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
    Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
    Effect of Operational- and Material-Oriented Parameters
  328. Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-08)
    Experimental Investigation of Fresh and Time-Dependent Rheological Properties of 3D Printed Cementitious Material
  329. Varela Hugo, Barluenga Gonzalo, Perrot Arnaud (2023-08)
    Nano-Modified Materials for New Construction Technologies:
    Self-Compacting and 3D Printing
  330. Olczyk Norbert, Skibicki Szymon, Gierszewska Natalia (2023-08)
    3D Printed Mortar with High Alumina-Cement as Alternative Solution for Standard Materials Used for 3D Printing
  331. Mani Aravindhraj, Muthukumar S., Sathyanarayanan K. (2023-08)
    Use of Alccofine 1203 as a Sustainable Supplementary Cementitious Material for Printable Concrete
  332. Pedrosa Ana, Gaspar Florindo (2023-08)
    Rheology-Assessment of Mortar-Materials for Additive Manufacturing
  333. Tarhan Yeşim, Perrot Arnaud (2023-08)
    Reinforcement of 3D Printable Earth-Based Mortar with Natural Textile-Material
  334. Chen Mingxu, Jin Yuan, Sun Keke, Wang Shoude et al. (2023-08)
    Study on the Durability of 3D Printed Calcium-Sulphoaluminate Cement-Based Materials Related to Rheology-Control
  335. Zhang Yi, Zhu Yanmei, Ren Qiang, He Bei et al. (2023-08)
    Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials
  336. Rahal Said, Kaci Abdelhak, Skoudarli Abdeslam (2023-07)
    Evaluation of Mechanical Anisotropy-Induced by 3D Printing Process for Earth-Based Materials
  337. Zhu Lingli, Zhang Meng, Zhang Yaqi, Yao Jie et al. (2023-07)
    Research Progress on Shrinkage Properties of Extruded 3D Printed Cement-Based Materials
  338. Armstrong Kristina, Kamath Dipti, Zhao Xianhui, Rencheck Mitchell et al. (2023-07)
    Life Cycle Cost, Energy, and Carbon Emissions of Molds for Pre-Cast Concrete:
    Exploring the Impacts of Material-Choices and Additive Manufacturing
  339. Arrêteau Manon, Fabien Aurélie, Haddaji Badreddine, Chateigner Daniel et al. (2023-07)
    Review of Advances in 3D Printing Technology of Cementitious Materials:
    Key Printing Parameters and Properties Characterization
  340. Pott Ursula, Jakob Cordula, Dorn Tobias, Stephan Dietmar (2023-07)
    Investigation of a Shotcrete-Accelerator for Targeted Control of Material-Properties for 3D Concrete Printing Injection-Method
  341. Çapunaman Özgüç, Iseman Emily, Gürsoy Benay (2023-07)
    Material in the Loop Fabrication:
    A Vision-Based Adaptive Clay 3D Printing Workflow on Indeterminate Sand Surfaces
  342. Rahemipoor Sahand, Hasany Masoud, Mehrali Mohammad, Almdal Kristoffer et al. (2023-07)
    Phase-Change-Materials Incorporation into 3D Printed Geopolymer Cement:
    A Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings
  343. Wang Fei, Hua Sudong, Chen Tingzhu, He Bijuan et al. (2023-07)
    Effect of Nano-Clay and PCE on the Buildability of Ultra-Fine Dredged Sand-Based 3D Printing Materials
  344. Tu Haidong, Wei Zhenyun, Bahrami Alireza, Kahla Nabil et al. (2023-06)
    Recent Advancements and Future Trends in 3D Printing Concrete Using Waste-Materials
  345. Mortada Youssef, Masad Eyad, Kogbara Reginald, Mansoor Bilal et al. (2023-06)
    Development of Ca(OH)2-Based Geopolymer for Additive Manufacturing Using Construction Wastes and Nano-Materials
  346. Fernández Fernando, Jarabo Rocío, Asensio Eloy, Guerrero Ana (2023-06)
    Natural Fibers for a 3D Printable Eco-ECC Material
  347. Joshi Arpan, Poullain Philippe, Craveiro Flávio, Bártolo Helena (2023-06)
    Earth as a Construction-Material for Sustainable 3D Printing:
    Rheological Aspect
  348. Anleu Paula, Pape Yann, Chen Qiyi, Advincula Rigoberto et al. (2023-06)
    An Innovative Carbonated Cementitious Material and Its Printability and Carbon Mineralization Capacity
  349. Jacquet Yohan, Perrot Arnaud (2023-06)
    Evolutionary Approach Based on Thermoplastic Bio-Based Building Material for 3D Printing Applications:
    An Insight into a Mix of Clay and Wax
  350. Sahoo Pitabash, Gupta Souradeep (2023-06)
    3D Printable Earth-Based Alkali-Activated Materials:
    Role of Mix-Design and Clay-Rich Soil
  351. Pressmair Nadine, Kromoser Benjamin (2023-06)
    Development-Stages of Structurally Optimized Concrete Girders:
    Design-Concepts, Material-Strategies and Experimental Investigation
  352. Obermeier Nico, Wiese Felix, Kustermann Andrea, Stengel Thorsten (2023-06)
    3D Printing Cement-Based Materials Using 100% of Recycled Aggregates
  353. Oh Sangwoo, Choi Seongcheol (2023-05)
    Effects of Superabsorbent Polymers (SAP) On the Rheological Behavior of Cement Mortars:
    A Rheological Study on Performance Requirements for 3D Printable Cementitious Materials
  354. Dijkers Hugo, Simon George, Bos Freek, Salet Theo et al. (2023-05)
    Material-Characteristics of 3D Printed Concrete Subjected to Highly Dynamic Loading
  355. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Šeta Berin et al. (2023-05)
    Computational Analysis of Yield-Stress-Buildup and Stability of Deposited Layers in Material-Extrusion Additive Manufacturing
  356. Bhushan Jindal Bharat, Jangra Parveen (2023-05)
    3D Printed Concrete:
    A Comprehensive Review of Raw Material’s Properties, Synthesis, Performance, and Potential Field Applications
  357. Gupta Shashank, Esmaeeli Hadi, Prihar Arjun, Ghantous Rita et al. (2023-04)
    Fracture- and Transport-Analysis of Heterogeneous 3D Printed Lamellar Cementitious Materials
  358. Nodehi Mehrab, Omer Liam, Asiabanpour Bahram, Ozbakkaloglu Togay (2023-04)
    A Novel Lightweight Mechanism for 3D Printing of Cementitious Materials
  359. Simedru Alexandru, Becze Anca, Cadar Oana, Scurtu Daniela et al. (2023-04)
    Structural Characterization of Several Cement-Based Materials Containing Chemical Additives with Potential Application in Additive Manufacturing
  360. Zhao Yasong, Gao Yangyunzhi, Chen Gaofeng, Li Shujun et al. (2023-04)
    Development of Low-Carbon Materials from GGBS and Clay-Brick-Powder for 3D Concrete Printing
  361. Khan Shoukat, Jassim Muhammad, İlcan Hüseyin, Şahin Oğuzhan et al. (2023-04)
    3D Printing of Circular Materials:
    Comparative Environmental Analysis of Materials and Construction Techniques
  362. Volpe Stelladriana, Sangiorgio Valentino, Petrella Andrea, Notarnicola Michele et al. (2023-04)
    3D Printed Concrete Blocks Made with Sustainable Recycled Material
  363. Ma Guowei, Huang Chen, Zhang Junfei (2023-04)
    Inner Damage-Identification and Residual Strength-Assessment of a 3D Printed Tunnel with Marble-Like Cementitious Materials Using Piezoelectric Transducers
  364. Valente Marco, Sambucci Matteo, Chougan Mehdi, Ghaffar Seyed (2023-04)
    Composite Alkali-Activated Materials with Waste-Tire-Rubber Designed for Additive Manufacturing:
    An Eco-Sustainable and Energy Saving Approach
  365. Panda Biranchi, Tran Jonathan (2023-03)
    Material-Design, Additive Manufacturing, and Performance of Cement-Based Materials
  366. Zahabizadeh Behzad, Segundo Iran, Pereira João, Freitas Elisabete et al. (2023-03)
    Photocatalysis of Functionalised 3D Printed Cementitious Materials
  367. Cui Weijiu, Wang Tianheng, Chen Xu, Shen Wenkai et al. (2023-03)
    Study of 3D Printed Concrete with Low-Carbon Cementitious Materials Based on Its Rheological Properties and Mechanical Performances
  368. Fonseca Mariana, Matos Ana (2023-03)
    3D Construction Printing Standing for Sustainability and Circularity:
    Material-Level Opportunities
  369. Qureshi Mohsin, Shiwazi Amira, Kindi Ghassan, Sawafi Bushra et al. (2023-03)
    Development of Additive for Concrete 3D Printer by Using Local Materials
  370. Dey Dhrutiman, Sahu Akshay, Prakash Srajan, Panda Biranchi (2023-03)
    A Study into the Effect of Material-Deposition-Methods on Hardened Properties of 3D Printed Concrete
  371. Bajpayee Aayushi, Farahbakhsh Mehdi, Zakira Umme, Pandey Aditi et al. (2023-03)
    In-Situ Resource Utilization and Reconfiguration of Soils into Construction Materials for the Additive Manufacturing of Buildings
  372. Onanuga Babajide, Biernacki Joseph (2023-03)
    Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials
  373. Huber Tobias, Burger Joris, Mata-Falcón Jaime, Kaufmann Walter (2023-03)
    Structural Design and Testing of Material-Optimized Ribbed RC Slabs with 3D Printed Formwork
  374. Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-03)
    Improving Homogeneity of 3D Printed Cementitious Material-Distribution for Radial Tool-Path
  375. Chen Yu, Liang Minfei, Zhang Yu, Li Zhenming et al. (2023-02)
    Can Superabsorbent Polymers Be Used as Rheology-Modifiers for Cementitious Materials in the Context of 3D Concrete Printing
  376. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Das Utpal et al. (2023-02)
    Optimization of Mix Proportion of 3D Printable Mortar Based on Rheological Properties and Material-Strength Using Factorial Design of Experiment
  377. Tao Yaxin, Ren Qiang, Vantyghem Gieljan, Lesage Karel et al. (2023-02)
    Extending 3D Concrete Printing to Hard Rock Tunnel Linings:
    Adhesion of Fresh Cementitious Materials for Different Surface Inclinations
  378. Ishida Takato, Nakada Kiyofumi (2023-02)
    Review of Rheology in Cement-Based Materials and Its Application to 3D Printing Using Concrete
  379. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2023-02)
    Printing Quality-Control of Cement-Based Materials Under Flow and Rest-Conditions
  380. Giwa Ilerioluwa, Game Daniel, Ahmed Hassan, Noorvand Hassan et al. (2023-02)
    Performance and Macrostructural Characterization of 3D Printed Steel-Fiber-Reinforced Cementitious Materials
  381. Christen Heidi, Zijl Gideon, Villiers Wibke (2023-02)
    Improving Building Thermal Comfort Through Passive Design:
    An Experimental Analysis of Phase-Change-Material 3D Printed Concrete
  382. Sambucci Matteo, Biblioteca Ilario, Valente Marco (2023-01)
    Life Cycle Assessment (LCA) of 3D Concrete Printing and Casting Processes for Cementitious Materials Incorporating Ground Waste Tire Rubber
  383. Ahmed Ghafur (2023-01)
    A Review of 3D Concrete Printing:
    Materials and Process Characterization, Economic Considerations and Environmental Sustainability
  384. Xia Lingwei, Bi Minghao, Wu Jie, Wang Fang et al. (2023-01)
    Integrated Lightweight Design-Method via Structural Optimization and Path-Planning for Material-Extrusion
  385. Jesus Manuel, Costa Joana, Teixeira João, Pessoa Ana Sofia et al. (2023-01)
    Use of Waste Materials to Reduce Cement and Natural Aggregates in 3D Printing Mortars
  386. Shen Yuhang, Lin Li, Wei Shengjie, Yan Jie et al. (2022-12)
    Research on the Preparation and Mechanical Properties of Solidified 3D Printed Concrete Materials
  387. Li Zihan, Liu Huanbao, Cheng Xiang, Nie Ping et al. (2022-12)
    Improvement of 3D Printing Cement-Based Material-Process:
    Parameter Experiment and Analysis
  388. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2022-12)
    Earth-Based Additive Manufacturing:
    A Field-Oriented Methodology for Evaluating Material-Printability
  389. Robayo-Salazar Rafael, Gutiérrez Ruby, Villaquirán-Caicedo Mónica, Delvasto Arjona Silvio (2022-12)
    3D Printing with Cementitious Materials:
    Challenges and Opportunities for the Construction Sector
  390. Srinivas Dodda, Dey Dhrutiman, Panda Biranchi, Sitharam Thallak (2022-12)
    Printability, Thermal and Compressive Strength Properties of Cementitious Materials:
    A Comparative Study with Silica-Fume and Limestone
  391. Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
    Modelling of 3D Concrete Printing Process:
    A Perspective on Material and Structural Simulations
  392. Yoris-Nobile Adrian, Slebi-Acevedo Carlos, Lizasoain-Arteaga Esther, Indacoechea-Vega Irune et al. (2022-11)
    Artificial Reefs Built by 3D Printing:
    Systematisation in the Design, Material-Selection and Fabrication
  393. Melichar Jindřich, Žižková Nikol, Brožovský Jiří, Mészárosová Lenka et al. (2022-11)
    Study of the Interaction of Cement-Based Materials for 3D Printing with Fly-Ash and Superabsorbent Polymers
  394. Christen Heidi, Cho Seung, Zijl Gideon, Villiers Wibke (2022-11)
    Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
  395. Kan Deyuan, Liu Guifeng, Cao Shuang, Chen Zhengfa et al. (2022-11)
    Mechanical Properties and Pore-Structure of Multi-Walled Carbon-Nano-Tube-Reinforced Reactive Powder-Concrete for Three-Dimensional Printing Manufactured by Material-Extrusion
  396. Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping et al. (2022-11)
    Flow and Deformation Behaviors of Cementitious Materials Through Nozzles with Different Geometric Parameters:
    Experimental and Numerical Approaches
  397. Lachmayer Lukas, Böhler David, Freund Niklas, Mai (née Dressler) Inka et al. (2022-11)
    Modelling the Influence of Material and Process Parameters on Shotcrete 3D Printed Strands:
    Cross-Section Adjustment for Automatic Robotic Manufacturing
  398. Zhao Yu, Yang Guang, Zhu Lingli, Ding Yahong et al. (2022-10)
    Effects of Rheological Properties and Printing Speed on Molding Accuracy of 3D Printing Basalt-Fiber Cementitious Materials
  399. D'Haese Romain, Carpentier Olivier, Dubois Vincent, Chafei Sawsen et al. (2022-10)
    3D Printable Materials Made with Industrial Byproducts:
    Formulation, Fresh and Hardened Properties
  400. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-10)
    The Fresh and Hardened Properties of 3D Printing Cement-Base Materials with Self-Cleaning Nano-TiO2:
    An Exploratory Study
  401. Chen Yu, Toosumran Nuttapon, Chehab Noura, Spanjers Henri et al. (2022-10)
    Feasibility Study of Using Desalination-Brine to Control the Stiffness and Early-Age Hydration of 3D Printable Cementitious Materials
  402. Liu Junli, Tran Jonathan (2022-09)
    Experimental Study on 3D-Printed Cementitious Materials Containing Surface-Modified Recycled Crumb-Rubber
  403. Li Mingyang, Weng Yiwei, Liu Zhixin, Zhang Dong et al. (2022-09)
    Optimizing of Chemical Admixtures for 3D Printable Cementitious Materials by Central Composite Design
  404. Zhao Yanhua, Meng Wei, Wang Peifu, Qian Dongqing et al. (2022-09)
    Research-Progress of Concrete 3D Printing Technology and Its Equipment System, Material, and Molding-Defect-Control
  405. Chougan Mehdi, Ghaffar Seyed, Nematollahi Behzad, Sikora Paweł et al. (2022-09)
    Effect of Natural and Calcined-Halloysite-Clay-Minerals as Low-Cost-Additives on the Performance of 3D Printed Alkali-Activated Materials
  406. Mortada Youssef, Mohammad Malek, Mansoor Bilal, Grasley Zachary et al. (2022-09)
    Development of Test-Methods to Evaluate the Printability of Concrete Materials for Additive Manufacturing
  407. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2022-09)
    Rheology and Printability of Portland-Cement-Based Materials:
    A Review
  408. Qian Hao, Hua Sudong, Yue Hongfei, Feng Guiyang et al. (2022-09)
    Utilization of Recycled Construction-Powder in 3D Concrete Printable Materials through Particle-Packing-Optimization
  409. Zhang Yuanyuan, Pan Pan, Li Wenqiang, Dong Biqin et al. (2022-09)
    Freeform Embedded Printing of Vasculature in Cementitious Materials for Healing-Agent Transport
  410. Aydin Eylül, Kara Burhan, Bundur Zeynep, Özyurt Nilüfer et al. (2022-08)
    A Comparative Evaluation of Sepiolite and Nano-Montmorillonite on the Rheology of Cementitious Materials for 3D Printing
  411. Boukhelf Fouad, Sebaibi Nassim, Boutouil Mohamed, Yoris-Nobile Adrian et al. (2022-07)
    On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing:
    Long-Term Interactions of Cementitious Materials in the Marine Environment
  412. Zhang Hongping, Liu Yaling, Cheng Zhi, Zhao Zhiyi (2022-07)
    Effect of Layering Molding Process on Strength of 3D Printed Composite Cement-Based Materials
  413. Ahmed Ghafur, Askandar Nasih, Jumaa Ghazi (2022-07)
    A Review of Large-Scale 3DCP:
    Material-Characteristics, Mix-Design, Printing-Process, and Reinforcement-Strategies
  414. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2022-06)
    Printability-Assessment of Cement-Based Materials Using Uniaxial Compression-Test
  415. Reißig Silvia, Nerella Venkatesh, Mechtcherine Viktor (2022-06)
    Material-Design and Rheological Behavior of Sustainable Cement-Based Materials in the Context of 3D Printing
  416. Mezhov Alexander, Robens-Radermacher Annika, Zhang Kun, Kühne Hans-Carsten et al. (2022-06)
    Temperature Impact on the Structural Build-Up of Cementitious Materials:
    Experimental and Modelling Study
  417. Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2022-06)
    Monitoring Strain Using Digital Image Correlation During Compressive and Tensile Loading:
    Assessment of Critical Strain of Cement-Based Materials Containing VMA
  418. Putten Jolien, Smet M., Heede Philip, Schutter Geert et al. (2022-06)
    Influence of the Print Process on the Durability of Printed Cementitious Materials
  419. Böhler David, Mai (née Dressler) Inka, Freund Niklas, Lachmayer Lukas et al. (2022-06)
    Influence of Material and Process Parameters on Hardened State Properties of Shotcrete 3D Printed Elements
  420. Kolawole John, Becker Daniel, Xu Jie, Dobrzanski James et al. (2022-06)
    Selected Test-Methods for Assessing Fresh and Plastic-State 3D Concrete Printing-Materials
  421. Rodriguez Fabian, Lopez Cristian, Wang Yu, Olek Jan et al. (2022-06)
    Evaluation of Durability of 3D Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments
  422. Yuan Qiang, Xie Zonglin, Yao Hao, Huang Tingjie et al. (2022-06)
    Effect of Polyacrylamide on the Workability and Inter-Layer Interface Properties of 3D Printed Cementitious Materials
  423. Hao Lucen, Xiao Jianzhuang, Sun Jingting, Xia Bing et al. (2022-06)
    Thermal Conductivity of 3D Printed Concrete With Recycled Fine Aggregate Composite Phase-Change-Materials
  424. Hager Izabela, Maroszek Marcin, Mróz Katarzyna, Kęsek Rafał et al. (2022-06)
    Inter-Layer Bond Strength Testing in 3D Printed Mineral Materials for Construction Applications
  425. Ren Chuangnan, Hua Dongliang, Bai Yonghui, Wu Shuang et al. (2022-06)
    Preparation and 3D Printing Building Application of Sulfoaluminate-Cementitious-Material Using Industrial Solid-Waste
  426. Reinold Janis, Meschke Günther (2022-06)
    Algorithm for Aging Materials with Evolving Stiffness Based on a Multiplicative Split
  427. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
    Assessing the Fresh Properties of Printable Cement-Based Materials:
    High-Potential Tests for Quality-Control
  428. Matos Paulo, Zat Tuani, Corazza Kiara, Fensterseifer Emilia et al. (2022-05)
    Effect of TiO2 Nano-Particles on the Fresh Performance of 3D Printed Cementitious Materials
  429. Xu Nuoyan, Qian Ye, Yu Jing, Leung Christopher (2022-05)
    Tensile Performance of 3D Printed Strain-Hardening Cementitious Composites Considering Material-Parameters, Nozzle-Size and Printing-Pattern
  430. Shkundalova Olena, Molkens Tom, Claßen Martin, Rossi Barbara (2022-05)
    Computational Modelling of Material-Behavior of Layered 3D Printed Concrete
  431. Wijaya Ignasius, Kreiger Eric, Masud Arif (2022-05)
    An Elastic‐Inelastic Model and Embedded Bounce‐Back-Control for Layered Printing with Cementitious Materials
  432. Ramakrishnan Sayanthan, Kanagasuntharam Sasitharan, Sanjayan Jay (2022-05)
    In-Line Activation of Cementitious Materials for 3D Concrete Printing
  433. Hu Hao, Cao Xiaoxiao, Zhang Tao, Chen Zhenfu et al. (2022-05)
    Three-Dimensional Printing Materials for Cultural Innovation Products of Historical Buildings
  434. Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei et al. (2022-05)
    Effect of FA and GGBFS on Compressive Strength, Rheology, and Printing Properties of Cement-Based 3D Printing Material
  435. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2022-04)
    3D Printing of Cement-Based Materials with Adapted Buildability
  436. Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
    Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
    A Systematic Literature Review
  437. Wang Huan, Tian Xinchen, Wei Huixian, Dai Xueyan et al. (2022-04)
    Effects of Redispersible Latex-Powder on the Performance of 3D Printing Cementitious Materials
  438. Li Weihong, Chen Xuhao, Li Nan (2022-04)
    3D Printing of Fast Setting Basalt Fiber-Reinforced Cement-Based Materials
  439. Chen Yu, Chang Ze, He Shan, Çopuroğlu Oğuzhan et al. (2022-04)
    Effect of Curing Methods During a Long Time-Gap Between Two Printing Sessions on the Inter-Layer Bonding of 3D Printed Cementitious Materials
  440. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2022-04)
    A Grammar-Based Algorithm for Tool-Path-Generation:
    Compensating for Material-Deformation in the Additive Manufacturing of Concrete
  441. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2022-04)
    3D Printing Devices and Reinforcing Techniques for Extruded Cement-Based Materials:
    A Review
  442. Nodehi Mehrab, Ozbakkaloglu Togay, Gholampour Aliakbar (2022-04)
    Effect of Supplementary Cementitious Materials on Properties of 3D Printed Conventional and Alkali-Activated Concrete:
    A Review
  443. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-03)
    Modifying Effect of Anionic Polyacrylamide Dose for Cement-Based 3DP Materials:
    Printability and Mechanical Performance Tests
  444. Teixeira João, Schaefer Cecília, Maia Lino, Rangel Bárbara et al. (2022-03)
    Influence of Supplementary Cementitious Materials on Fresh Properties of 3D Printable Materials
  445. Afarani Hajar, Moser Newell, Garboczi Edward, Esfahani Ebrahim et al. (2022-03)
    Print Fidelity Metrics for Additive Manufacturing of Cement-Based Materials
  446. Pan Tinghong, Jiang Yaqing, Ji Xuping (2022-03)
    Inter-Layer Bonding Investigation of 3D Printing Cementitious Materials with Fluidity-Retaining Polycarboxylate-Superplasticizer and High-Dispersion Polycarboxylate Superplasticizer
  447. Pan Tinghong, Teng Huaijin, Liao Hengcheng, Jiang Yaqing et al. (2022-03)
    Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials:
    Experimental and Numerical Studies
  448. Ranjan Rajeev, Kumar Deepak, Kundu Manoj, Chandra Moi Subhash (2022-03)
    A Critical Review on Classification of Materials Used in 3D Printing Process
  449. Putten Jolien, Volder Melissa, Heede Philip, Deprez Maxim et al. (2022-03)
    Transport Properties of 3D Printed Cementitious Materials with Prolonged Time-Gap Between Successive Layers
  450. Tay Yi, Lim Jian, Li Mingyang, Tan Ming (2022-03)
    Creating Functionally Graded Concrete Materials with Varying 3D Printing Parameters
  451. Peerzada Abdul, Rangaraju Prasad, Roberts James, Biehl Adam (2022-03)
    Influence of External Vibration on the Gravitational Flow Characteristics of Cementitious Materials:
    A Perspective from Application in Additive Manufacturing
  452. Cui Hongzhi, Yu Shiheng, Cao Xiangpeng, Yang Haibin (2022-03)
    Evaluation of Printability and Thermal Properties of 3D Printed Concrete Mixed with Phase-Change-Materials
  453. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-03)
    Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials:
    Correction
  454. Lowke Dirk, Mai (née Dressler) Inka, Keita Emmanuel, Perrot Arnaud et al. (2022-02)
    Material-Process Interactions in Particle-Bed 3D Printing and the Underlying Physics
  455. Ivaniuk Egor, Ivanova Irina, Sokolov Dmitrii, Tošić Zlata et al. (2022-02)
    Application-Driven Material-Design of Printable Strain-Hardening Cementitious Composites
  456. Shao Lijing, Feng Pan, Zuo Wenqiang, Wang Haochuan et al. (2022-02)
    A Novel Method for Improving the Printability of Cement-Based Materials:
    Controlling the Releasing of Capsules Containing Chemical Admixtures
  457. Harbouz Ilhame, Rozière Emmanuel, Yahia Ammar, Loukili Ahmed (2022-02)
    Printability-Assessment of Cement-Based Materials Based on Rheology, Hydration Kinetics, and Viscoelastic Properties
  458. Chen Yuning, Liu Chao, Cao Ruilin, Chen Chun et al. (2022-02)
    Systematical Investigation of Rheological Performance Regarding 3D Printing Process for Alkali-Activated Materials:
    Effect of Precursor Nature
  459. Liu Junli, Nguyen Vuong, Panda Biranchi, Fox Kate et al. (2022-02)
    Additive Manufacturing of Sustainable Construction Materials and Form-Finding Structures:
    A Review on Recent Progresses
  460. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Suraneni Prannoy et al. (2022-02)
    Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete:
    A Review
  461. Chen Yuning, Jia Lutao, Liu Chao, Zhang Zedi et al. (2022-01)
    Mechanical Anisotropy Evolution of 3D Printed Alkali-Activated Materials with Different GGBFS-FA Combinations
  462. Bakar Muhammad, Saude Nasuha, Ibrahim Mustaffa, Ismail Nur (2022-01)
    Additive Manufacturing:
    A Review of Current 3D Concrete Printing on Materials, Methods, Applications, Properties and Challenges
  463. Hojati Maryam, Li Zhanzhao, Memari Ali, Park Keunhyoung et al. (2022-01)
    3D Printable Quaternary-Cementitious-Materials Towards Sustainable Development:
    Mixture Design and Mechanical Properties
  464. Roussel Nicolas, Lowke Dirk, Buswell Richard (2022-01)
    Digital Fabrication with Cement-Based Materials:
    The RILEM D.F.C. Technical Committee
  465. Putten Jolien, Nerella Venkatesh, Mechtcherine Viktor, Hondt Mélody et al. (2022-01)
    Properties and Testing of Printed Cement-Based Materials in Hardened State
  466. Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Process Classification and Case Studies
  467. Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Underlying Physics
  468. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
    Printable Cement-Based Materials:
    Fresh Properties Measurements and Control
  469. Yang Huashan, Che Yujun (2022-01)
    Recycling of Aggregate Micro-Fines as a Partial Replacement for Fly-Ash in 3D Printing Cementitious Materials
  470. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Pedersen David et al. (2022-01)
    Numerical Predictions of Bottom-Layer-Stability in Material-Extrusion Additive Manufacturing
  471. Sun Xiaoyan, Ye Boxing, Lin Kangjian, Wang Hailong (2021-12)
    Shear-Performance of 3D Printed Concrete Reinforced with Flexible or Rigid Materials Based on Direct-Shear-Test
  472. Wu Zixia, Xu Yading, Šavija Branko (2021-12)
    Mechanical Properties of Lightweight Cementitious Cellular Composites Incorporating Micro-Encapsulated Phase-Change-Material
  473. Min Kyung-Sung, Park Kwang-Min, Lee Bong-Chun, Roh Young-Sook (2021-12)
    Chloride Diffusion by Build Orientation of Cementitious Material-Based Binder-Jetting 3D Printing Mortar
  474. Şahin Hatice, Mardani Ali (2021-12)
    Assessment of Materials, Design Parameters and Some Properties of 3D Printing Concrete Mixtures:
    A State of the Art Review
  475. Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2021-12)
    Open-Span Printing Method for Assessment of Early-Age Deformations of Additively Manufactured Cement-Based Materials Using an Isosceles Triangle
  476. Yao Hao, Xie Zonglin, Li Zemin, Huang Chuhan et al. (2021-11)
    The Relationship Between the Rheological Behavior and Inter-Layer Bonding Properties of 3D Printing Cementitious Materials with the Addition of Attapulgite
  477. Jin Yuan, Zhou Xiaolong, Chen Mingxu, Zhao Zhihui et al. (2021-11)
    High-Toughness 3D Printed White Portland-Cement-Based Materials with Glass-Fiber-Textile
  478. Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
    A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing
  479. Zhang Hongping, Wang Jianhong, Liu Yaling, Zhang Xiaoshuang et al. (2021-11)
    Effect of Processing Parameters on the Printing Quality of 3D Printed Composite Cement-Based Materials
  480. Pajonk Adam, Prieto Alejandro, Blum Ulrich, Knaack Ulrich (2021-11)
    Multi-Material Additive Manufacturing in Architecture and Construction:
    A Review
  481. Tam Vo, Hien Do, Luan Phan, Tran Van et al. (2021-11)
    3D Concrete Printing-Material:
    Preliminary Study
  482. Marczyk Joanna, Ziejewska Celina, Gądek Szymon, Korniejenko Kinga et al. (2021-11)
    Hybrid Materials Based on Fly-Ash, Metakaolin, and Cement for 3D Printing
  483. Antoni Antoni, Agraputra A., Teopilus D., Sunaryo A. et al. (2021-11)
    Investigation of the Material-Mixtures and Fiber-Addition for 3D Concrete Printing
  484. Markin Slava, Schröfl Christof, Blankenstein Paul, Mechtcherine Viktor (2021-11)
    Three-Dimensional-Printed Wood-Starch Composite as Support Material for 3D Concrete Printing
  485. Jacquet Yohan, Picandet Vincent, Perrot Arnaud (2021-11)
    Characterization of Tensile Behavior of Fresh Cementitious Materials
  486. Lee Hojae, Seo Eun-A, Kim Won-Woo, Moon Jae-Heum (2021-10)
    Experimental Study on Time-Dependent Changes in Rheological Properties and Flow-Rate of 3D Concrete Printing Materials
  487. Li Zhijian, Ma Guowei, Wang Fang, Wang Li et al. (2021-10)
    Expansive Cementitious Materials to Improve Micro-Cable-Reinforcement Bond in 3D Concrete Printing
  488. Shahzad Qamar, Shen Junyi, Naseem Rabia, Yao Yonggang et al. (2021-10)
    Influence of Phase-Change-Material on Concrete Behavior for Construction 3D Printing
  489. Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2021-09)
    Shrinkage Behavior of Cementitious 3D Printing Materials:
    Effect of Temperature and Relative Humidity
  490. Stoiber Nadine, Kromoser Benjamin (2021-09)
    Pushing Concrete Material-Usage to the Limit:
    Weight-Optimized, 3D Printed Concrete Girders with External Reinforcement
  491. Burger Joris, Wangler Timothy, Chiu Yu-Hung, Techathuvanun Chanon et al. (2021-09)
    Material-Informed Formwork Geometry:
    The Effects of Cross-Sectional Variation and Patterns on the Strength of 3D Printed Eggshell Formworks
  492. Lindner Marco, Scharf‐Wildenhain Ronny, Gliniorz Ralf, Vanselow Konrad et al. (2021-09)
    Calibration Method for Constant Strands of Material with Robotassisted Concrete Extrusion
  493. Miranda Luiza, Lesage Karel, Schutter Geert (2021-09)
    Understanding the Structural Build-Up-Rate of Cementitious Materials for 3D Printing
  494. Baghdadi Abtin, Dörrie Robin, Kloft Harald (2021-08)
    New Calculation Approach for Selecting and Orienting the Reinforcing Material for Robotic Concrete Manufacturing
  495. Munir Qaisar, Peltonen Riku, Kärki Timo (2021-08)
    Printing Parameter Requirements for 3D Printable Geopolymer Materials Prepared from Industrial Side Streams
  496. Wang Yu, Jiang Yaqing, Pan Tinghong, Yin Kangting (2021-08)
    The Synergistic Effect of Ester-Ether Copolymerization Thixo-Tropic Superplasticizer and Nano-Clay on the Buildability of 3D Printable Cementitious Materials
  497. Che Yujun, Tang Shengwen, Yang Huashan, Li Weiwei et al. (2021-08)
    Influences of Air-Voids on the Performance of 3D Printing Cementitious Materials
  498. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2021-08)
    Experimental Calibration and Compensation for the Continuous Effect of Time, Number of Layers and Volume of Material on Shape Deformation in Small-Scale Additive Manufacturing of Concrete
  499. Chen Yu, He Shan, Zhang Yu, Wan Zhi et al. (2021-08)
    3D Printing of Calcined-Clay-Limestone-Based Cementitious Materials
  500. Nodehi Mehrab, Asiabanpour Bahram, Omer Liam, Ozbakkaloglu Togay (2021-08)
    Material-Characterization of Diversity Aggregated Cementitious Materials Produced with a Modular Lightweight Additive Manufacturing Extrusion-System
  501. Bedarf Patrick, Dutto Alessandro, Zanini Michele, Dillenburger Benjamin (2021-08)
    Foam 3D Printing for Construction:
    A Review of Applications, Materials, and Processes
  502. Yang Huashan, Che Yujun, Shi Mengyuan (2021-07)
    Influences of Calcium-Carbonate-Nano-Particles on the Workability and Strength of 3D Printing Cementitious Materials Containing Limestone-Powder
  503. Bhattacherjee Shantanu, Basavaraj Anusha, Rahul Attupurathu, Santhanam Manu et al. (2021-06)
    Sustainable Materials for 3D Concrete Printing
  504. Dai Shuo, Zhu Huajun, Zhai Munan, Wu Qisheng et al. (2021-06)
    Stability of Steel-Slag as Fine Aggregate and Its Application in 3D Printing Materials
  505. Markin Slava, Krause Martin, Otto Jens, Schröfl Christof et al. (2021-06)
    3D Printing with Foam-Concrete:
    From Material Design and Testing to Application and Sustainability
  506. Said F., Eldwib Donia, Zaytoun M., Elsalam A. et al. (2021-05)
    3D Printing Concrete Incoroprating Environmentally Friendly Materials
  507. Sun Junbo, Huang Yimiao, Aslani Farhad, Wang Xiangyu et al. (2021-05)
    Mechanical Enhancement for EMW-Absorbing Cementitious Material Using 3D Concrete Printing
  508. Pacillo Gerardo, Ranocchiai Giovanna, Loccarini Federica, Fagone Mario (2021-05)
    Additive Manufacturing in Construction:
    A Review on Technologies, Processes, Materials, and Their Applications of 3D and 4D Printing
  509. Li Hui, Meng Huamin, Lan Mingzhang, Zhou Jian et al. (2021-05)
    Development of a Novel Material and Casting-Method for In-Situ Construction on Mars
  510. Schmidt Albrecht, Mengesha Meron, Göbel Luise, Könke Carsten et al. (2021-05)
    Numerical Modeling of an Extrusion-Based Concrete Printing Process Considering Spatially and Temporarily Varying Material and Process Parameters
  511. Salman Nazar, Ma Guowei, Ijaz Nauman, Wang Li (2021-04)
    Importance and Potential of Cellulosic Materials and Derivatives in Extrusion-Based 3D Concrete Printing:
    Prospects and Challenges
  512. Ramyar Elham, Xinwei Z., Cusatis Gianluca (2021-04)
    Numerical Simulation of 3D Printing of Infrastructure Materials
  513. Pott Ursula, Stephan Dietmar (2021-04)
    Penetration-Test as a Fast Method to Determine Yield-Stress and Structural Build-Up for 3D Printing of Cementitious Materials
  514. Bos Freek, Kruger Jacques, Lucas Sandra, Zijl Gideon (2021-04)
    Juxtaposing Fresh Material-Characterisation-Methods for Buildability-Assessment of 3D Printable Cementitious Mortars
  515. Rutzen Matthias, Lauff Philipp, Niedermeier Roland, Fischer Oliver et al. (2021-03)
    Influence of Fiber-Alignment on Pseudoductility and Micro-Cracking in a Cementitious Carbon-Fiber Composite Material
  516. Cui Peng, Wu Chun-ran, Chen Jie, Luo Fuming et al. (2021-02)
    Preparation of Magnesium-Oxysulfate Cement as a 3D Printing Material
  517. Weng Yiwei, Li Mingyang, Zhang Dong, Tan Ming et al. (2021-02)
    Investigation of Inter-Layer Adhesion of 3D Printable Cementitious Material from the Aspect of Printing-Process
  518. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
    Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
    Possibilities and Challenges
  519. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2021-02)
    Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials
  520. Chougan Mehdi, Ghaffar Seyed, Sikora Paweł, Chung Sang-Yeop et al. (2021-02)
    Investigation of Additive Incorporation on Rheological, Microstructural and Mechanical Properties of 3D Printable Alkali-Activated Materials
  521. Chen Yu, Çopuroğlu Oğuzhan, Rodríguez Claudia, Filho Fernando et al. (2021-02)
    Characterization of Air-Void Systems in 3D Printed Cementitious Materials Using Optical Image Scanning and X-Ray Computed Tomography
  522. Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2021-02)
    Effect of Printing Parameters on Material-Distribution in Spray-Based 3D Concrete Printing (S-3DCP)
  523. Xu Jiabin, Chen Mingxu, Zhao Zhihui, Li Laibo et al. (2021-01)
    Printability and Efflorescence-Control of Admixtures-Modified 3D Printed White Portland-Cement-Based Materials Based on the Response-Surface-Methodology
  524. Demont Léo, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2021-01)
    Flow-Based Pultrusion of Continuous Fibers for Cement-Based Composite Material and Additive Manufacturing:
    Rheological and Technological Requirements
  525. Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
    Improving Performance of Additive Manufactured Concrete:
    A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
  526. Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria (2021-01)
    Evaluation of Material-Modification Using PET in 3D Concrete Printing Technology
  527. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-12)
    Gravity-Induced Flow to Characterize Rheological Properties of Printable Cement-Based Materials
  528. Gu Hai, Sun Jianhua, Zhang Jie, Xu Yuanyuan et al. (2020-12)
    Effect of Material-Ratio on the Performances in 3D Cement Printing and Its Optimization
  529. Putten Jolien, Snoeck Didier, Coensel R., Schutter Geert et al. (2020-12)
    Early-Age Shrinkage Phenomena of 3D Printed Cementitious Materials with Superabsorbent Polymers
  530. Dubov Alexey, Ruben Sam (2020-11)
    Material Development Standards and Methods for Additive Manufacturing in Construction to Meet Building Code Requirements for Certification
  531. Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2020-11)
    Assessment of Asymmetrical Rheological Behavior of Cementitious Material for 3D Printing Application
  532. Afarani Hajar, Carroll William, Garboczi Edward, Biernacki Joseph (2020-11)
    Designing 3D Printable Cementitious Materials with Gel-Forming Polymers
  533. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-11)
    Additive Manufacturing of Cementitious Materials by Selective Paste-Intrusion:
    Numerical Modeling of the Flow Using a 2D-Axisymmetric Phase-Field-Method
  534. Craveiro Flávio, Bártolo Helena, Duarte José, Bartolo Paulo (2020-10)
    A Multi-Material Extrusion-Nozzle for Functionally-Graded Concrete Printing
  535. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
    Extrusion-Based Concrete 3D Printing from a Material Perspective:
    A State of the Art Review
  536. Mohan Manu, Rahul Attupurathu, Tittelboom Kim, Schutter Geert (2020-10)
    Rheological and Pumping Behavior of 3D Printable Cementitious Materials with Varying Aggregate Content
  537. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2020-10)
    Experimental Prediction of Material-Deformation in Large-Scale Additive Manufacturing of Concrete
  538. Guo Xiaolu, Yang Junyi, Xiong Guiyan (2020-09)
    Influence of Supplementary Cementitious Materials on Rheological Properties of 3D Printed Fly-Ash-Based Geopolymer
  539. Xiao Jianzhuang, Zou Shuai, Yu Ying, Wang Yu et al. (2020-09)
    3D Recycled Mortar Printing:
    System-Development, Process-Design, Material-Properties and On-Site-Printing
  540. Yang Huashan, Li Weiwei, Che Yujun (2020-08)
    3D Printing Cementitious Materials Containing Nano-CaCO3:
    Workability, Strength, and Microstructure
  541. Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
    Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
    An Experimental and Numerical Study
  542. Li Zhanzhao, Hojati Maryam, Wu Zhengyu, Piasente Jonathon et al. (2020-07)
    Fresh and Hardened Properties of Extrusion-Based 3D Printed Cementitious Materials:
    A Review
  543. Chang Ze, Schlangen Erik, Šavija Branko (2020-07)
    Extended-Lattice-Model to Simulate the Printing-Process of 3D Printed Cementitious Materials
  544. Odaglia Pietro, Voney Vera, Dillenburger Benjamin, Habert Guillaume (2020-07)
    Advances in Binder-Jet 3D Printing of Non-Cementitious Materials
  545. Suntharalingam Thadshajini, Nagaratnam Brabha, Poologanathan Keerthan, Hackney Phil et al. (2020-07)
    Effect of Polypropylene-Fibers on the Mechanical Properties of Extrudable Cementitious Material
  546. Dedenis Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud et al. (2020-07)
    Effect of Metakaolin, Fly-Ash and Polypropylene-Fibers on Fresh and Rheological Properties of 3D Printing Based Cement Materials
  547. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-07)
    Gravity-Driven Tests to Assess Mechanical Properties of Printable Cement-Based Materials at Fresh State
  548. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2020-07)
    Printed Concrete as Formwork-Material:
    A Preliminary Study
  549. Hirsch Tamino, Dorn Tobias, Ehm Clemens, Stephan Dietmar (2020-07)
    Comparison of Printable Inorganic Binders:
    Key Properties for 3D Printable Materials
  550. Park Jinsoo, Lee Hojae, Choi Hanshin (2020-07)
    Buildability of Mortar-Feedstock in Material-Extrusion Additive Manufacturing
  551. Chen Yu, Rodríguez Claudia, Li Zhenming, Chen Boyu et al. (2020-07)
    Effect of Different Grade Levels of Calcined Clays on Fresh and Hardened Properties of Ternary-Blended Cementitious Materials for 3D Printing
  552. Shahzad Qamar, Wang Xujiang, Wang Wenlong, Wan Yi et al. (2020-06)
    Coordinated Adjustment and Optimization of Setting-Time, Flowability, and Mechanical Strength for Construction 3D Printing Material Derived from Solid Waste
  553. Yuan Qiang, Zhou Dajun, Huang Hai, Peng Jianwei et al. (2020-06)
    Structural Build-Up, Hydration and Strength Development of Cement-Based Materials with Accelerators
  554. Carstensen Josephine (2020-06)
    Topology-Optimization with Nozzle-Size-Restrictions for Material-Extrusion-Type Additive Manufacturing
  555. Putten Jolien, Azima M., Heede Philip, Mullem T. et al. (2020-06)
    Neutron-Radiography to Study the Water-Ingress via the Inter-Layer of 3D Printed Cementitious Materials for Continuous Layering
  556. Fratello Virginia, Rael Ronald (2020-05)
    Innovating Materials for Large-Scale Additive Manufacturing:
    Salt, Soil, Cement and Chardonnay
  557. Lowke Dirk, Talke Daniel, Mai (née Dressler) Inka, Weger Daniel et al. (2020-05)
    Particle-Bed 3D Printing by Selective Cement-Activation:
    Applications, Material and Process Technology
  558. Nair Sooraj, Panda Subhashree, Santhanam Manu, Sant Gaurav et al. (2020-05)
    A Critical Examination of the Influence of Material-Characteristics and Extruder-Geometry on 3D Printing of Cementitious Binders
  559. Muthukrishnan Shravan, Kua Harn, Yu Ling, Chung Jacky (2020-05)
    Fresh Properties of Cementitious Materials Containing Rice-Husk-Ash for Construction 3D Printing
  560. Kontovourkis Odysseas, Phocas Marios, Tryfonos George, Georgiou Christos (2020-05)
    Multi-Axis 3D Printing of Material-Reduced Shell-Structures on a Reconfigurable Supporting-System Using Topology-Optimization Principles
  561. Allouzi Rawan, Azhari Wael, Allouzi Rabab (2020-05)
    Conventional Construction and 3D Printing:
    A Comparison Study on Material-Cost in Jordan
  562. Albar Abdulrahman, Chougan Mehdi, Kheetan Mazen, Swash Mohammad et al. (2020-04)
    Effective Extrusion-Based 3D Printing System Design for Cementitious-Based Materials
  563. Liu Zhixin, Li Mingyang, Tay Yi, Weng Yiwei et al. (2020-04)
    Rotation-Nozzle and Numerical Simulation of Mass-Distribution at Corners in 3D Cementitious Material-Printing
  564. Liu Zhixin, Li Mingyang, Weng Yiwei, Qian Ye et al. (2020-03)
    Modelling- and Parameter-Optimization for Filament-Deformation in 3D Cementitious Material-Printing Using Support-Vector-Machine
  565. Shahsavari Rouzbeh, Hwang Sung (2020-03)
    Bio-Iinspired Cementitious Materials:
    Main Strategies, Progress, and Applications
  566. Chen Yu, Figueiredo Stefan, Li Zhenming, Chang Ze et al. (2020-03)
    Improving Printability of Limestone-Calcined-Clay-Based Cementitious Materials by Using Viscosity-Modifying Admixture
  567. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
    Extrusion-Based Additive Manufacturing with Cement-Based Materials:
    Production Steps, Processes, and Their Underlying Physics
  568. Jo Jun, Jo Byung, Cho Woohyun, Kim Jung-Hoon (2020-03)
    Development of a 3D Printer for Concrete Structures:
    Laboratory Testing of Cementitious Materials
  569. Craveiro Flávio, Nazarian Shadi, Bártolo Helena, Bartolo Paulo et al. (2020-02)
    An Automated System for 3D Printing Functionally Graded Concrete-Based Materials
  570. Lu Bing, Zhu Weiping, Weng Yiwei, Liu Zhixin et al. (2020-02)
    Study of MgO-Activated-Slag as a Cementless Material for Sustainable Spray-Based 3D Printing
  571. Alkhalidi Ammar, Hatuqay Dina (2020-02)
    Energy Efficient 3D Printed Buildings:
    Material and Techniques Selection Worldwide Study
  572. Lakhal Othman, Chettibi Taha, Belarouci Abdelkader, Dherbomez Gerald et al. (2020-02)
    Robotized Additive Manufacturing of Funicular Architectural Geometries Based on Building Materials
  573. Rahul Attupurathu, Sharma Abhishek, Santhanam Manu (2020-01)
    A Desorptivity-Based Approach for the Assessment of Phase Separation During Extrusion of Cementitious Materials
  574. Ma Guowei, Li Yanfeng, Wang Li, Zhang Junfei et al. (2020-01)
    Real-Time Quantification of Fresh and Hardened Mechanical Property for 3D Printing Material by Intellectualization with Piezoelectric Transducers
  575. Ivanova Irina, Mechtcherine Viktor (2020-01)
    Possibilities and Challenges of Constant Shear-Rate-Test for Evaluation of Structural Build-Up-Rate of Cementitious Materials
  576. Lafhaj Zoubeir, Rabenantoandro Andry, Moussaoui Soufiane, Dakhli Zakaria et al. (2019-12)
    Experimental Approach for Printability-Assessment:
    Toward a Practical Decision-Making Framework of Printability for Cementitious Materials
  577. Suntharalingam Thadshajini, Nagaratnam Brabha, Poologanathan Keerthan, Hackney Phil et al. (2019-12)
    Effect of Polypropylene-Fibers on the Workability Parameters of Extrudable Cementitious Materials
  578. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Sanjayan Jay (2019-12)
    Dimensional Accuracy, Flowability, Wettability, and Porosity in Inkjet 3DP for Gypsum and Cement Mortar Materials
  579. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
    Mineral-Impregnated Carbon-Fiber Composites as Novel Reinforcement for Concrete Construction:
    Material and Automation Perspectives
  580. Nazarian Shadi, Duarte José, Bilén Sven, Memari Ali et al. (2019-11)
    Additive Manufacturing of Architectural Structures:
    An Interplay Between Materials, Systems, and Design
  581. Albar Abdulrahman, Swash Mohammad, Ghaffar Seyed (2019-10)
    The Design and Development of an Extrusion-System for 3D Printing Cementitious Materials
  582. Putten Jolien, Deprez Maxim, Cnudde Veerle, Schutter Geert et al. (2019-09)
    Microstructural Characterization of 3D Printed Cementitious Materials
  583. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2019-09)
    Effect of Silicon-Carbide-Nano-Particles on 3D Printability of Cement-Based Materials
  584. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Hermens Lex et al. (2019-09)
    The Influence of Material Temperature on the In-Print Strength and Stability of a 3D Print Mortar
  585. Mostafavi Sina, Kemper Benjamin, Du Chong (2019-08)
    Materializing Hybridity in Architecture:
    Design to Robotic Production of Multi-Materiality in Multiple Scales
  586. Roussel Nicolas, Bessaies-Bey Hela, Kawashima Shiho, Marchon Delphine et al. (2019-08)
    Recent Advances on Yield-Stress and Elasticity of Fresh Cement-Based Materials
  587. Kim Kwan, Yeon Jaeheum, Lee Hee, Yeon Kyu-Seok (2019-08)
    Feasibility Study of SBR-Modified Cementitious Mixtures for Use as 3D Additive Construction Materials
  588. Markin Slava, Nerella Venkatesh, Schröfl Christof, Guseynova Gyunay et al. (2019-07)
    Material-Design and Performance-Evaluation of Foam-Concrete for Digital Fabrication
  589. Alghamdi Hussam, Neithalath Narayanan (2019-07)
    Synthesis and Characterization of 3D Printable Geopolymeric Foams for Thermally Efficient Building Envelope Materials
  590. Putten Jolien, Schutter Geert, Tittelboom Kim (2019-07)
    Surface-Modification as a Technique to Improve Inter-Layer Bonding Strength in 3D Printed Cementitious Materials
  591. Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
    The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete
  592. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2019-06)
    Processing of Cementitious Materials for 3D Concrete Printing
  593. Hirayama Yuta, Zhang Jiali, Kawahara Yoshihiro (2019-06)
    A Method to Evaluate the Formability and Fluidity of Concrete-Based Materials for 3D Printing
  594. Comminal Raphaël, Serdeczny Marcin, Pedersen David, Spangenberg Jon (2019-06)
    Motion-Planning and Numerical Simulation of Material-Deposition at Corners in Extrusion Additive Manufacturing
  595. Hamidi Fatemeh, Aslani Farhad (2019-05)
    Additive Manufacturing of Cementitious Composites:
    Materials, Methods, Potentials, and Challenge
  596. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
    An Investigation into the Effects of Deposition-Orientation of Material on the Mechanical Behavior of the Cementitious Powder and Gypsum-Powder in Inkjet 3D Printing
  597. Serdeczny Marcin, Comminal Raphaël, Pedersen David, Spangenberg Jon (2019-05)
    Numerical Simulations of the Mesostructure Formation in Material-Extrusion Additive Manufacturing
  598. Ji Guangchao, Ding Tao, Xiao Jianzhuang, Du Shupeng et al. (2019-05)
    A 3D Printed Ready-Mixed Concrete Power-Distribution Substation:
    Materials and Construction Technology
  599. Liu Gaojie, Bai Erlei, Xu Jinyu, Wang Tengjiao et al. (2019-05)
    Research Status and Development Prospect of 3D Printing Concrete Materials
  600. Jie G., Jie B., Hongxue J. (2019-05)
    Experimental Study on Layer Bonding Property of 3D Printing Building Materials
  601. Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud (2019-04)
    Mechanical Behavior of 3D Printed Cement Materials
  602. Chen Yu, Li Zhenming, Figueiredo Stefan, Çopuroğlu Oğuzhan et al. (2019-04)
    Limestone and Calcined-Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing:
    A Fundamental Study of Extrudability and Early-Age Strength Development
  603. Chen Yu, Figueiredo Stefan, Yalçınkaya Çağlar, Çopuroğlu Oğuzhan et al. (2019-04)
    The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined-Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
  604. Lafhaj Zoubeir, Dakhli Zakaria (2019-04)
    Performance Indicators of Printed Construction Materials:
    A Durability-Based Approach
  605. Lu Bing, Qian Ye, Li Mingyang, Weng Yiwei et al. (2019-04)
    Designing Spray-Based 3D Printable Cementitious Materials with Fly-Ash-Cenosphere and Air-Entraining Agent
  606. Zahabizadeh Behzad, Cunha Vítor, Pereira João, Gonçalves Claúdia (2019-03)
    The Effect of Loading-Direction on the Compressive Behavior of a 3D Printed Cement-Based Material
  607. Lu Bing, Weng Yiwei, Li Mingyang, Qian Ye et al. (2019-02)
    A Systematical Review of 3D Printable Cementitious Materials
  608. Cao Xiangpeng, Li Zongjin (2019-02)
    Factors Influencing the Mechanical Properties of Three-Dimensional Printed Products From Magnesium-Potassium-Phosphate Cement Material
  609. Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2019-02)
    Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model
  610. Ingaglio Joseph, Fox John, Naito Clay, Bocchini Paolo (2019-02)
    Material-Characteristics of Binder-Jet 3D Printed Hydrated CSA Cement with the Addition of Fine Aggregates
  611. Kaufhold Julia, Kohl Johannes, Nerella Venkatesh, Schröfl Christof et al. (2019-02)
    Wood-Based Support Material for Extrusion-Based Digital Construction
  612. Perrot Arnaud, Rangeard Damien, Nerella Venkatesh, Mechtcherine Viktor (2019-02)
    Extrusion of Cement-Based Materials:
    An Overview
  613. Alghamdi Hussam, Nair Sooraj, Neithalath Narayanan (2019-02)
    Insights into Material-Design, Extrusion Rheology, and Properties of 3D Printable Alkali-Activated Fly-Ash-Based Binders
  614. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Malek Sardar (2019-01)
    Review of Emerging Additive Manufacturing Technologies in 3D Printing of Cementitious Materials in the Construction Industry
  615. Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
    Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing
  616. Nerella Venkatesh, Näther Mathias, Iqbal Arsalan, Butler Marko et al. (2018-09)
    In-Line Quantification of Extrudability of Cementitious Materials for Digital Construction
  617. Chen Mingxu, Li Laibo, Zheng Yan, Zhao Piqi et al. (2018-09)
    Rheological and Mechanical Properties of Admixtures-Modified 3D Printing Sulphoaluminate Cementitious Materials
  618. Moini Mohamadreza, Olek Jan, Magee Bryan, Zavattieri Pablo et al. (2018-09)
    Additive Manufacturing and Characterization of Architectured Cement-Based Materials via X-Ray Micro-Computed Tomography
  619. Putten Jolien, Schutter Geert, Tittelboom Kim (2018-09)
    The Effect of Print Parameters on the (Micro)structure of 3D Printed Cementitious Materials
  620. Lowke Dirk (2018-09)
    Concrete, the Predestined Building Material for Additive Manufacturing
  621. Moini Mohamadreza, Olek Jan, Youngblood Jeffrey, Magee Bryan et al. (2018-08)
    Additive Manufacturing and Performance of Architectured Cement-Based Materials
  622. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
    Effect of Spray-Based Printing Parameters on Cementitious Material-Distribution
  623. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
    Experimental Investigation of Printing Parameters on Material-Distribution in 3D Spray Cementitious Material Printing Process
  624. Hillegas James, Liu Rui, Liu Bosheng, Sanchez Alex et al. (2018-07)
    Engineering Properties Influencing Clayey Materials for Additive Manufacturing
  625. Ma Guowei, Zhang Junfei, Wang Li, Li Zhijian et al. (2018-06)
    Mechanical Characterization of 3D Printed Anisotropic Cementitious Material by the Electromechanical Transducer
  626. Secrieru Egor, Khodor Jad, Schröfl Christof, Mechtcherine Viktor (2018-05)
    Formation of Lubricating Layer and Flow Type During Pumping of Cement-Based Materials
  627. Lu Bing, Li Mingyang, Qian Shunzhi, Leong Kah et al. (2018-05)
    Develop Cementitious Materials Incoporating Fly-Ash-Cenophere for Spray-Based 3D Printing
  628. Ting Andrew, Tay Yi, Annapareddy Ashokreddy, Li Mingyang et al. (2018-05)
    Effect of Recycled-Glass Gradation in 3D Cementitious Material-Printing
  629. Liu Zhixin, Li Mingyang, Wong Teck, Tan Ming (2018-05)
    Measurement of the Fresh Rheological Properties of Material in 3D Printing
  630. Lim Jian, Weng Yiwei, Li Mingyang (2018-05)
    Effect of Fiber-Reinforced Polymer on Mechanical Performance of 3D Printed Cementitious Material
  631. Annapareddy Ashokreddy, Panda Biranchi, Ting Guan, Li Mingyang et al. (2018-05)
    Flow And Mechanical Properties of 3D Printed Cementitious Material With Recycled Glass-Aggregates
  632. Li Mingyang, Lao Wenxin, He Lewei, Masia Lorenzo et al. (2018-05)
    Effect of Rotational Trapezoid Shaped Nozzle on Material-Distribution in 3D Cementitious Material-Printing-Process
  633. Paul Suvash, Zijl Gideon, Tan Ming, Gibson Ian (2018-05)
    A Review of 3D Concrete Printing Systems and Materials Properties:
    Current Status and Future Research Prospects
  634. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum (2018-05)
    Feasibility Study of the Use of Polymer-Modified Cement Composites as 3D Concrete Printing-Material
  635. Perrot Arnaud, Rangeard Damien, Courteille Eric (2018-04)
    3D Printing of Earth-Based Materials:
    Processing Aspects
  636. Secrieru Egor, Cotardo Dario, Mechtcherine Viktor, Lohaus Ludger et al. (2018-04)
    Changes in Concrete Properties During Pumping and Formation of Lubricating Material Under Pressure
  637. Chua Chee, Yeong Wai, An Jia (2018-04)
    Special Issue:
    NextGen Materials for 3D Printing
  638. Ngo Tuan, Kashani Alireza, Imbalzano Gabriele, Nguyen Quynh et al. (2018-02)
    Additive Manufacturing (3D Printing):
    A Review of Materials, Methods, Applications and Challenges
  639. Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2018-01)
    Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model
  640. Coenders Jeroen, Mathot Maarten, Martens Pascal, Bos Freek et al. (2017-12)
    Optimizing 3D Concrete Printing:
    Exploring Potentials and Limitations of Materials and Production
  641. Ma Guowei, Li Zhijian, Wang Li (2017-12)
    Printable Properties of Cementitious Material Containing Copper-Tailings for Extrusion-Based 3D Printing
  642. Villacis N., Gualavisi M., Narváez-Muñoz Christian, Carrión L. et al. (2017-11)
    Additive Manufacturing of a Rheological Characterized Cement-Based Composite Material
  643. Ma Guowei, Wang Li (2017-08)
    A Critical Review of Preparation Design and Workability Measurement of Concrete Material for Large-Scale 3D Printing
  644. Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
    Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction
  645. Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
    Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material
  646. Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
    Cementitious Materials for Construction-Scale 3D Printing:
    Laboratory Testing of Fresh Printing Mixture
  647. Shakor Pshtiwan, Sanjayan Jay, Nazari Ali, Nejadi Shami (2017-02)
    Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing
  648. Werkheiser Niki, Edmunson Jennifer, Fiske Michael, Khoshnevis Behrokh (2015-09)
    On the Development of Additive Construction Technologies for Application to Development of Lunar/Martian Surface Structures Using In-Situ Materials
  649. Zhou Xiangming, Li Zongjin (2015-08)
    Manufacturing Cement-Based Materials and Building Products via Extrusion:
    From Laboratory to Factory
  650. Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
    Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques
  651. Roussel Nicolas, Gram Annika (2014-03)
    Physical Phenomena Involved in Flows of Fresh Cementitious Materials
  652. Jeon Kwang-Hyun, Park Min-Beom, Kang Min-Kyung, Kim Jung-Hoon (2013-11)
    Development of an Automated Freeform Construction System and Its Construction Materials
  653. Perrot Arnaud, Mélinge Yannick, Estellé Patrice, Lanos Christophe (2009-04)
    Vibro-Extrusion:
    A New Forming Process for Cement-Based Materials
  654. Khoshnevis Behrokh, Dutton Rosanne (1998-01)
    Innovative Rapid Prototyping Process Makes Large-Sized, Smooth-Surfaced Complex Shapes in a Wide Variety of Materials