#base¶

Keywords by Co - Occurrence¶

#print (494) #concrete (294) #cement (229) #material (184) #extrusion (118)

1. Tripathi Avinaya, Nair Sooraj, Rajan Subramaniam, Sant Gaurav et al. (2026-04)
   Deformation-Based Buildability Assessment of 3D Printed Concrete and Its Numerical Simulation
2. Ali Muhammad, Qian Hui, Umar Muhammad, Wang Puhan et al. (2026-04)
   Flexural Performance of ECC Thin-Plate Reinforced with Shape Memory Alloy Fibre Fabricated by Extrusion-Based 3D-Printing
3. Chougule Pranav, Abraham David, Farnam Yaghoob, Ebrahimkhanlou Arvin (2026-04)
   Laser-Based Monitoring of Robotic Carbon Dioxide Injection in Fresh Additively Manufactured Concrete
4. Xie Fan, Hu Hailong, Deng Yang, Wang Dong et al. (2026-04)
   Development of Heat-Triggered Sulfate Capsule for on-Demand Setting 3D Printing Phosphogypsum-Based Cement
5. Lemougna Patrick, Cantaluppi Marco, Faleschini Flora, Toska Klajdi et al. (2026-04)
   Mechanical Properties, 3D Printing and Environmental Performance of Ordinary Portland Cement (OPC) Mortars Containing Calcite Rich Residue from Stabilised Basic Oxygen Furnace Slag
6. Wang Xianfeng, Zheng Junhao, Zhang Xuanzhe, Zhu Guang et al. (2026-04)
   Pickering Emulsion-Based 3D Printing for Efficient Vascular Self-Healing in Cementitious Materials.
7. Duan Yuhang, Liew Jia, Rabczuk Timon, Liew Kim (2026-04)
   Frictional Contact Modeling Within a Local Strain-Based Peridynamic Framework for Impact-Induced Failure of 3D-Printed Concrete
8. Mostafavi Sina, Motejano-Hernandez Edgar, Bagheri Bahar, Etemadi Ali et al. (2026-04)
   Robotic Concrete 3D Printing Continuous Toolpath Planning:
   From Single Curve to Voxel-Based Systems for Design-to-Production of Urban Furnitures
9. Akula Pavan, Ray Saswati, Bastola Ashish, Masoomi Maryam et al. (2026-04)
   Suction-Based Framework of 3D-Printed Earthen Materials:
   Linking Geotechnical Properties, Buildability, and Strength
10. Zhu Pengjia, Tan Hailong, Ma Juntao, Yin Jianguang et al. (2026-04)
    Mix Proportion Design and Performance Regulation of 3D-Printing Phosphogypsum-Based Geopolymer Paste
11. Li Haodao, Khayat Kamal (2026-04)
    Extrusion-Based 3D Printing of Fiber-Reinforced Concrete
12. Zhu Tao, Wu Yuching, Zhi Peng, Zhu Peng et al. (2026-03)
    Non-Ordinary State-Based Peridynamics Simulation for Crack Propagation of 3D-Printed Fiber-Reinforced Concrete Beam Under Bending
13. Rojas Omar, Nakamatsu Javier, Aguilar Rafael, Ñañez Robert et al. (2026-03)
    Improved Resistance to Water Erosion and Self-Healing Capacity of Earthen-Based 3D Printed Elements Using Enzyme-Induced Carbonate Precipitation (EICP)
14. Zozaya Daiquiri, Shojaeian Hamideh, Uviña-Contreras Francisco, Hojati Maryam (2026-03)
    3D Printing of Earth-Based Mixtures:
    Linking Material Design, Printability, and Structural Performance
15. Warsi Syed, Panda Biranchi, Biswas Pankaj, Chandra Borsaikia Arun (2026-03)
    Design of Earthquake-Resistant 3D Printed Concrete Walls:
    An Integrated Experimental-Numerical Framework for Predicting Cyclic Performance of Full-Scale Structural Building Based on Wall Testing
16. Sun Yuhang, Liu Xiongfei, Zhang Yalei, Ma Guowei (2026-03)
    Spray-Based 3D Printed Tunnel Lining Concrete:
    Optimization of Full-Angle Printing Path
17. Qi Pengfei, Zhao Wenhao, Yang Bo, Wang Ziyuan et al. (2026-03)
    GRA-RSM Based Optimization Model for the Mechanical Performance of 3D Printed Basalt Fiber Concrete
18. Bai Songlin, Yao Xiaofei, Yang Min, Liu Shilong et al. (2026-03)
    Design and Construction of Spatial Curved Structures Based on Concrete Additive Manufacturing:
    A Case Study of an Irregular Gatehouse
19. Campello Eduardo, Avancini Victor, Quintana-Ruiz Osvaldo (2026-03)
    A DEM-Based Simulation Framework for 3D Concrete Printing with the Discrete Fresh Concrete Model
20. Zuo Zibo, Huang Yulin, Li Jin, Corte Wouter (2026-03)
    Monitoring Prioritization for On-Site 3D Concrete Printing Based on the Analytic Hierarchy Process
21. Zhao Qiliang, Huang Yuxiang, Wang Bowen, Zhang Qiuchi et al. (2026-03)
    An Integrated Deep Learning Framework for CT-Based Mesoscopic Segmentation and Quantitative Analysis of 3D-Printed Concrete
22. Chen Chi, Wang Shenglin, Li Xiaoyuan, Yang Dengwei (2026-03)
    Recent Progress and Methodology for the Characterization of Layer-Effects of Extrusion-Based 3D-Printed Concrete
23. Reißig Silvia, Mechtcherine Viktor (2026-03)
    Assessing and Modeling the Buildability of Cement-Based Materials in the Context of Digital Fabrication
24. Rehman Saif, Robens-Radermacher Annika, Unger Jörg, Wolfs Robert (2026-03)
    Assessing Structural Failure in Extrusion-Based 3D Concrete Printing Using a Plasticity Model with Non-Linear Hardening
25. Jia Ru, Huang Xin, Yang Haoran, Yao Weijing et al. (2026-03)
    Based on X-CT and DEM Simulation:
    A Study on Performance Anisotropy and Mechanisms of 3D Printed Concrete
26. Gomez Enrique, Varela Hugo, Barluenga Gonzalo (2026-03)
    Evaluation of Cone-Penetration Test as a Rheology Quality-Control Field-Oriented Test for 3D Printing Cement-Based Systems
27. Li Haiyan, Luo Aizhong, Zhang Xiaozhong, Ma XiaoMeng et al. (2026-03)
    Optimization of One-Part Alkali-Activated Concrete for Extrusion-Based 3D Printing Through Integrated Performance Evaluation
28. Ashok Tanshette Akash, Faisal Zoheb, Huang Jianxin, Puppala Anand (2026-03)
    Durability Evaluation of Soil-Geopolymer Based Composites for 3D Printing Applications in Geotechnical Engineering
29. Dhakal Suvechha, Tiwari Nitin (2026-03)
    Printability and Structural Integrity of Fiber-Reinforced Earth-Based Materials for 3D Printing
30. Chen H., Sharma S., Delavar Mohammad, Sideris Petros (2026-03)
    Quantification of Seismic Performance Parameters for Single-Story 3D Printed Concrete Buildings Based on Collapse Criteria
31. Liu Jiaxu, Zhang Nan, Xie Xiangyu, Sanjayan Jay et al. (2026-02)
    Orientation and Spatial Distribution of Pores and Fibers in Concrete Elements Produced by Extrusion-Based 3D Printing
32. Deng Yongjie, Li Weihong, Li Wei, Lyu Libo et al. (2026-02)
    Optimized Mix Design and 3D Printing Application of Magnesium Oxysulfate-Based Martian Concrete Using 100% In-Situ Resources
33. Koedmontree Porntipa, Thanakulwuttiporn Phachara, Wongwian Laksameekarn, Jai-Inta Pruksa et al. (2026-02)
    Development of High-CaO Fly Ash-Based Alkali-Activated Mortar for 3D Printing Technology
34. Oh Gyujong, Oh Sangwoo, Choi Seongcheol (2026-02)
    Carbonated Basic Oxygen Furnace Slag Fine Aggregate in Concrete:
    Laboratory Assessment and Sustainable Application in 3D-Printed Concrete Components
35. Morán-Zabala Jean, Cogollo-Flórez Juan, Gutiérrez-Rôa Derly, Correa-Espinal Alexander (2026-02)
    Design of Experiments-Based Analysis of Operating Parameters in Small-Scale Clay 3D Printing
36. Ma Siqi, Zhang Feng, Fu Shuai, Min Benzhi et al. (2026-02)
    Bioinspired Multilayer Barriers of 3D-Printed Lunar Regolith Simulant-Based Geopolymers for Mechanical and Thermal Protection
37. Giulivo Gianluca, Menna Costantino (2026-02)
    The Role of Interlayer Interfaces in 3D-Printed Elements:
    A Nonlinear FEM-Based Study
38. Gan Qili, Tao Qin, Liu Nana, Ruan Chunfeng et al. (2026-02)
    Comparative Analysis of Compressive Performance Between 3D Printed and Cast-in-Place Cement-Based Materials
39. Peng Yiming, Unluer Cise (2026-02)
    Thixotropic and Mechanical Behavior of MgO-SiO2 Pastes Incorporating Rice Husk Ash for Extrusion‐Based 3D Printing
40. Lima Andrade Everton, Silva Nunes Ueslei, Souza Paulo, Vieira Nóbrega Ana et al. (2026-02)
    Assessment of Accelerators for 3D-Printed LC3-Based Cementitious Materials
41. Liu Fang, Wang Haiwei, Zheng Xinchao, Hu Xueting et al. (2026-02)
    Study on the Workability and Mechanical Influencing Factors of 3D-Printed Coal Gangue-Fly Ash-Based Geopolymers
42. Bassel Abdelshahid, Yasmeen A., Khaled Nassar (2026-02)
    Simulation-Based 3D Concrete Printing Toolpath Optimization Considering Concrete Rheology and Supporting Activities
43. Ma Zongfang, Li Borong, Deng Ruixiang, Shang Jingkai et al. (2026-01)
    A Point Cloud-based Multi-scale Fusion Segmentation Model for Surface Pore Structures in 3D Printed Concrete
44. Sahu Akshay, Panda Biranchi (2026-01)
    Growth Curve-Based Continuous Toolpath Design for Improving the Performance of Additively Manufactured Concrete
45. Li Junjie, Li Yangbo, Ge Xianqiang, Li Ke et al. (2026-01)
    Strength Enhancement of 3D-Printed Phosphogypsum Concrete Based on Synergistic Activation of Multi-Solid Wastes
46. Padilla-Encinas Pilar, Corani Jose, Cuevas Jaime, Guerrero Ana et al. (2026-01)
    Valorisation of Industrial Wastes in Magnesium Potassium Phosphate Cements for Extrusion-Based 3D Printing
47. Mudi Charitha, Gupta Souradeep, Basithali E. (2026-01)
    Influence of Engineered Natural Fiber Reinforcement in 3D Printed Earth-Based Cementitious Composites:
    Fresh and Hardened Properties
48. Gencel Osman, Er Yusuf, Güler Onur, Ustaoğlu Abid et al. (2026-01)
    Replacing Natural Aggregates with Phase Change Material-Based 3D Printed Aggregates in Concrete for Structural Function and Dual Thermal Energy Storage
49. Liao Minmao, Sun Xiao, Chen Zhaohui (2026-01)
    Simultaneous Topology and Path Optimization for 3D Concrete Printing Based on Discrete Frame Structures
50. Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2026-01)
    Improving Bond Performance of 3D-Printable Earth-Based Mortar Reinforced with Jute Fibers
51. Aden Abdishukri, Nuñez Montoya Alejandra, Ponce Josef, Rangel Bárbara et al. (2026-01)
    FAB-BIO:
    A Review of Bio-Based Materials Applied on 3D-Printed Living Walls
52. Tinoco Matheus, Márquez Álvaro, Ramallo Laura, Barluenga Gonzalo et al. (2026-01)
    Effect of Cellulose Microfibers on Rheological Properties and Printability of 3D Printable Cement-Based Composites
53. Hechtl Christian, Dahlenburg Maximilian, Bos Freek, Kränkel Thomas et al. (2025-12)
    Adaptive-Binder-Aggregate Mixing (ABAM):
    Concept for Extrusion-Based Multi-Material 3D Concrete Printing
54. Eisazadeh Hamid, Chatroudi Narges, Alizadeh Roozbeh (2025-12)
    AI-Based Prediction and Numerical Analysis of Mechanical and Microstructural Parameters of Carbon Fiber Reinforced 3D Printed Composites
55. Rodriguez Fabian, Vugteveen Caiden, Fross Xavier, Wei Hui et al. (2025-12)
    3D Printing of Cement-Based Materials Using Seawater for Simulated Marine Environments
56. Kalmykov Oleg, Demianenko Ivan, Potapov Sergei, Alataev Dzhmaldii (2025-12)
    Strain Energy Density-Based Topology Optimization Using SIMP and Local Failure Criteria for 3D-Printed Concrete Structures
57. Deng North, Wang Sizhe, Li Mingyang, Wang Xiangyu et al. (2025-12)
    A Perforated Strip-Based Three-Dimensional Reinforcement Strategy for 3D Printed Concrete:
    Flexural Testing of Beams as a Proof of Concept
58. Okangba Stanley, Ngcobo Ntebo, Mahachi Jeffrey (2025-12)
    Bridging Innovation and Governance:
    A UTAUT-Based Mixed-Method Study of 3D Concrete Printing Technology Acceptance in South Africa
59. Sun Yuhang, Yang Xiaojie, Liu Xiongfei, Ma Guowei et al. (2025-12)
    Coordinated Spray-Based 3D Printing of Reinforced Concrete Structure:
    A Multi-Angle Strategy for Blockage Mitigation
60. Shilar Fatheali, Shilar Mubarakali (2025-12)
    Performance-Based Analysis of 3D Printed Geopolymers Relating Durability, Microstructure, and Life Cycle Assessment
61. Ramezani Mahyar, Kilic Ugur, Sherif Muhammad, Arce Gabriel et al. (2025-12)
    Rheological Properties and Mechanical Response of Bio-Based Graphene Enhanced Additively Manufactured Cementitious Composites
62. Feng Hu, Yuan Xiang, Yu Zhenyu, Guo Aofei et al. (2025-12)
    Printability and Rheological Properties of 3D Printing Ultra-High Ductility Magnesium Phosphate Cement-Based Composites
63. Ghodke Swapnil, Singh Bhupinder, Chowdhury Shubhankar (2025-11)
    Some Insights on Role of Water Film-Thickness in Rheology of Coarse Aggregate-Based 3D Printable Concrete
64. Benz Hendrik, Nguyen Trong The, Klemt-Albert Katharina (2025-11)
    Real-Time Vision-Based Defect Detection for Large-Scale on-Site Earthen Additive Manufacturing:
    Annotated Dataset and Dual-Model Framework
65. Tang Can, Zhou Yujie, Mehmood Awais, Rania Chlihi et al. (2025-11)
    A Novel 3D-Printed Negative Poisson's Ratio Grid-Reinforced Cement-Based Composite Wall Structure:
    Design, Fabrication, and Compressive Properties
66. Hasan Md, Xu Jie, Uddin Md (2025-11)
    A Critical Review of 3D Printed Fiber-Based Geopolymer Concrete:
    Fresh Properties, Mechanical Performance, and Current Limitations
67. Khalid Lawand, Mermerdaş Kasım, Ekmen Şevin, Khidhir Bzeni Dillshad (2025-11)
    Optimization of Fresh and Hardened Properties of Fiber-Reinforced 3D Printed Geopolymer Composites Using Response Surface Methodology:
    A Data-Driven Approach Based on Prior Experimental Studies
68. Zhu Binrong, Liu Xuhua, Wei Yang, Pan Jinlong (2025-11)
    Predicting the Tensile Performance of 3D-Printed PE Fiber-Reinforced ECC Based on Micromechanics Model
69. Lu Qi, Hua Sudong, Yue Hongfei (2025-11)
    Effect of Spherical Electric Arc Slag on Solid Waste-Based 3D-Printed Concrete
70. Sun Yuhang, Li Chuang, Liu Xiongfei, Wang Li et al. (2025-11)
    Enhancing Sulfate Resistance of Spray-Based 3D Printed Recycled Tunnel Slag Concrete Through Polypropylene Fiber Optimization
71. Liu Xiongfei, Wang Haonan, Chen Jinnan, Sun Yuhang et al. (2025-11)
    Fiber Orientation Control in Spray-Based 3D Printed Steel Fiber Reinforced Concrete
72. Assi Lateef, Alsalman Ali, Kareem Rahman, Carter Kealy (2025-11)
    Advantages and Challenges of 3D Geopolymer-Based Concrete in Construction
73. Nair Sajitha, Nagarajan Praveen, Thampi Santosh, Das Sudha et al. (2025-10)
    Life Cycle-Based Sustainability Assessment of Optimized 3D Printable Concrete Mixes Incorporating Scms and Recycled Aggregates
74. Li Yeou-Fong, Lin Chih-Chieh, Syu Jin-Yuan, Huang Chih-Hong et al. (2025-10)
    Enhancing 3D-Printed Cement Mortar with Recycled PCB Glass Fibers:
    Printability, Mechanical Strength, and FEM-Based Structural Assessment
75. Liu Renlong, Cheng Zhangqi (2025-10)
    Interlayer Fracture Properties of 3D-Printed Cement-Based Structures:
    Influencing Factors and Mechanisms
76. Wang Hailong, Song Xinlei, Shen Wenbin, Sun Xiaoyan et al. (2025-10)
    Evaluation and Optimization of 3D-Printed Concrete Based on Flowability Considering Printability and Micro-Pore Characteristics
77. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
    Durability Assessment of 3D Printed Cement-Based Materials:
    A RILEM TC 304-ADC Interlaboratory Study
78. Ke Zhijiang, Li Zichang, Chen Zhengfei, Xu Yao et al. (2025-10)
    Technological Advancements and Challenges of Robotic Arm-Based 3D Printing for Hydraulic Tunnel Lining
79. Ye Fan, Ren Xiaodan (2025-10)
    A Eulerian Circuit-Based Reinforcement Learning Path Optimization Method for 3D Concrete Printing
80. Niu Huaxian, Yu Bo, Hao Ji (2025-10)
    CFD-Based Flow Field Analysis of Spiral Nozzles in 3D Concrete Printing
81. Verma Shilpi, Parghi Anant (2025-10)
    Machine Learning-Based Prediction of Compressive Strength in Additive Manufacturing of Concrete Technology
82. Wang Huai, Li Xiulin, Gong Hao, Xu Jingjie et al. (2025-10)
    Thermal and Mechanical Properties of 3D-Printed Fiber-Reinforced Lightweight Concrete Based on Air Entrainment and Hollow Glass Microspheres
83. Tanaka Shunsei, Yoshida Kohei, Yamamoto Yujin, Kinomura Koji (2025-10)
    Numerical Evaluation on Buildability of 3D Printing Mortar Based on Time-Dependent Material Model
84. Wan Qian, Wang Li, Huang Xiaodong, Wu Hao et al. (2025-10)
    Shape Optimization Based on Isogeometric Analysis for 3D Concrete Printing:
    A Design Method for Printing-Friendly Structure
85. Biernacki Joseph (2025-10)
    Sustainability of Additively Manufactured Cement-Based Housing:
    What's Our Next Move?
86. Lange David, Shen Chuanyue (2025-10)
    Modeling the Fresh Properties of Cement-Based Materials for 3D Concrete Printing
87. Li Haodao, Khayat Kamal (2025-10)
    Performance-Based Design of 3D Printable Cement Composite Using Locally Available Materials
88. Liu Renlong, Tang Jiyu, Feng Hu, Cheng Zhangqi (2025-09)
    Study on the Instability of Early Age 3D Printing Cement-Based Structure:
    Considering the Influence of Interface
89. Jesus Manuel, Dias Ricardo, Teixeira João, Delgado João et al. (2025-09)
    Optimisation of 3D Printable Cement- and Lime-Based Mortars for Built Heritage Rehabilitation
90. Rabul H., Prem Prabhat, Ravichandran Darssni, Rathan RT Arjun (2025-09)
    Development of Fly Ash and Limestone Calcined Clay-Based Mixtures for Concrete 3D Printing
91. Anwar Muhammad, Zhu Xingyi, Zhang Yating, Wang Jiakang et al. (2025-09)
    Synergistic Effects of Microwave Curing Regimes on Early, Mid, and Long-Term Strengths and Microstructural Performance of Fly Ash-Slag Based 3D-Printed Geopolymers
92. Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
    Layer Interface in 3D Printed Cement-Based Materials:
    Heterogeneous Phase Distribution and New Insights into Formation Mechanism
93. Ding Tao, Zhu Ruitao, Huang Zhangshuo (2025-09)
    Experimental Study on the Steel Fiber Orientational Distribution of Extrusion-Based 3D-Printed Ultra High-Performance Concrete
94. Li Leo, Fei Zuojie, Jiao Chujie, Luo Tao et al. (2025-09)
    Bauxite Residue-Based 3D Printing Mortar:
    Enhancing Performance and Sustainability Through the Paste Replacement Approach
95. Sabouni Reem, Martini Samer (2025-09)
    Characterization of 3D Printed Concrete Mixtures Developed Using Local UAE Materials Based on Rheological Properties
96. Xing Wenjing, Li Zhengrong (2025-09)
    Quantifying the Heterogeneous Anisotropic Thermal Performance of Extrusion-Based 3D Printed Structures:
    A Multiscale Computational Approach
97. Leong Wai (2025-09)
    Structural Optimization and Performance Evaluation of Spain's 3D-Printed Concrete Bridges Using AI-Based Design Approaches
98. Chen Wenguang, Liang Long, Ye Junhong, Liu Lingfei et al. (2025-09)
    Machine Learning-Enabled Performance-Based Design of Three-Dimensional Printed Engineered Cementitious Composites
99. Li Fuhai, Xiao Sai, Yang Bo, Li Kepu et al. (2025-09)
    Mechanical Properties and Anisotropy of 3D-Printed Concrete Modified with Multiscale Materials Based on Optimized Printing Process Design
100. Márquez Álvaro, Varela Hugo, Barluenga Gonzalo (2025-09)
     Influence of Rheology Modifying Admixtures on the Buildability of 3D Printing Cement-Based Mortars
101. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
     Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
     A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
102. Rabiei Mahsa, Moini Mohamadreza (2025-09)
     Extrusion Under Material Uncertainty with Pressure-Based Closed-Loop Feedback Control in Robotic Concrete Additive Manufacturing
103. Wang Xiaoqi, Liu Xing, Xu Yanling, Cao Jianfu et al. (2025-08)
     A General Adaptive Layer Height Continuous Path Planning Algorithm for Concrete 3D Printing of Complex Porous Structures Based on Multi-Objective Optimization and Reinforcement Learning
104. Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng (2025-08)
     Optimization of Building Structures Based on Additive Manufacturing:
     A Review
105. Disu Oluwatimilehin, Ismail Sikiru, Wood Luke, Chrysanthou Andreas et al. (2025-08)
     Experimental Study on Buildability of 3D-Printed Cement-Based Structures Using Aluminium Sulphate
106. Liu Zhixin, Si Liang, Liu Yebao, Li Mingyang et al. (2025-08)
     Optimization of Printing Parameters Based on Computational Fluid Dynamics for Uniform Filament Mass Distribution at Corners in 3D Cementitious Material Printing
107. Abid Khasim, Syed Sajid, Khan Majid (2025-08)
     Explainable Machine Learning-Based Model for Predicting Interlayer Bond Strength in 3D Printed Concrete
108. Dong Enlai, Jia Zijian, Rao Suduan, Jia Lutao et al. (2025-08)
     Fiber Alignment Mechanism in 3D-Printed Ultra-High Performance Concrete Based on Fluid Dynamics Theory
109. Yang Xia, Wang Jiuyuan, Huang Han, Wu Gengchen et al. (2025-08)
     Anti-Washout Cement-Based Material for Under-Seawater 3D Concrete Printing:
     Design, Mechanical Properties and Microstructural Analysis
110. Francescangeli M., Toma D., Mendizabal V., Carandell M. et al. (2025-08)
     Artificial Reef Based Ecosystem Design and Monitoring
111. Khan Hilal, Zahid Zamil, Hussain Fazal, Ahmad Junaid et al. (2025-08)
     Sustainable Multifunctional Biochar-Based Cementitious Composites for Carbon Sequestration, Energy Storage, and Smart Infrastructure Applications:
     A Review
112. Li Nan, Deng Yongjie, Li Weihong, Li Lingyu et al. (2025-08)
     Performance of Active-Magnesia-Based Magnesium Phosphate Cement and Application of Rapid-Solidification 3D Printing Technology
113. Siqueira Neto Luiz, Isgor Burkan, Weiss William (2025-08)
     Modeling Fluid Absorption in Layered Anisotropic Cement-Based Materials
114. Oulkhir Fatima, Akhrif Iatimad, Jai Mostapha, Rihani Nadir (2025-07)
     Clay and Alginate-Based Mixtures 3D Printing:
     A Numerical Procedure for Shape Stability and Buildability Assessment
115. Amdouni Marwen, Nasraoui Helmi, Rezgui Mohamed, Trabelsi Ali (2025-07)
     Use of the RDPP-SF Method to Analyze Rheology Variation in an AM-Cement-Based Process
116. Singh Amardeep, Anand Kamal, Liu Qiong, Tam Vivian et al. (2025-07)
     Enhancing Interlayer Bonding in 3D Printed Concrete Using Bacteria-Based Biomineralization
117. Chovghi Frederic, Richter Christiane, D'Acunto Pierluigi (2025-07)
     Fabrication-Aware Structural Form-Finding for Additive Manufacturing:
     An Equilibrium-Based Approach
118. Pan Keheng, Cheng Yinhan, Qu Guangfei, Yuan Zheng et al. (2025-07)
     Development and Optimization of Geopolymer-Based 3D Printing Materials Utilizing Industrial Solid Waste:
     Rheological Properties and Practical Applications
119. Ding Shengxuan, Li Jiren, Wang Mingqiang (2025-07)
     Study on Mechanical Properties of Composite Basalt Fiber 3D-Printed Concrete Based on 3D Meso-Structure
120. Joshi Arpan, Gaspar Florindo, Archbold Paul, Silvestre José (2025-07)
     Study on the Composition of Mortars Based on Forest Biomass Fly Ash for Sustainable 3D Printing
121. Yang Rijiao, Xu Chengji, Fang Sen, Li Xinze et al. (2025-07)
     Mechanistic Insights into Microstructural Changes Caused by Stapling in Extrusion-Based 3D Printed Concrete (3DPC)
122. Kellnerová Vendula, David Tomáš, Reiterman Pavel (2025-07)
     Modification of Properties of Fresh Mixture for 3D Printing Using Cement-Based Mortar
123. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2025-07)
     Squeeze Test:
     A Toolkit for Assessing the Printability of Stiff Cement-Based Materials.
124. Wang Tongcai, Gu Guangshuai, Zhang Rihan, Cui Qianshun et al. (2025-07)
     Additive Manufacturing of Lunar Regolith via Resin-Based Binder and Material Extrusion Method for High-Performance In-Situ Manufacturing on the Moon
125. Kaur Zinnia, Goyal Shweta, Kwatra Naveen, Bera Tarun (2025-07)
     Pore Structure Analysis and Durability Performance of Sustainable 3D Printed Concrete Incorporating Fly Ash and Limestone Calcined Clay Based Binders
126. Šána Vladimír, Litoš Jiří (2025-07)
     Load-Bearing Capacity of the 3D Printed Concrete Structure Based on a Static Assessment and Load Test in Scale 1:1
127. Liu Qiang, Zhang Xinwei, Jiang Quan, Xia Yong et al. (2025-07)
     Effects of Nano-Al2O3, Nano-MgO and Nano-Fe2O3 on the Properties of Cement-Based 3D Printing:
     A Comparative Study
128. Mahmoodi Obaid, Siad Hocine, Lachemi Mohamed, Şahmaran Mustafa (2025-07)
     Recent Advances in CDW-Based Geopolymers:
     A Review of Mechanical Performance, Structural Application, 3D Printing, Durability and Sustainability
129. Li Qiyan, Su Anshuang, Gao Xiaojian (2025-06)
     Improvement of Interlayer Performance of 3D Printable Magnesium Oxysulfate Cement-Based Materials by Carbonation Curing
130. Cui Weijiu, Ji Dongsheng, Shen Liang, Su Shiyong et al. (2025-06)
     A Neural Network-Based Model for Assessing 3D Printable Concrete Performance in Robotic Fabrication
131. Liu Shun, Yang Xiaobin, Wu Jianing (2025-06)
     Damage Evolution Analysis of Cement-Based 3D Printing Similar Materials Under Different Cyclic Loading-Unloading Conditions
132. Khodadadi Nima, Roghani Hossein, Caso Francisco, Kenawy El‐Sayed et al. (2025-06)
     Machine Learning Approach for the Flexural Strength of 3D‐Printed Fiber‐reinforced Concrete Based on the Meta‐heuristic Algorithm
133. Sagyntay Mukhagali, Storch Florian, Mustafa Azamat, Plaschnick Paul et al. (2025-06)
     Automated Production of 3D Printed Сoncrete Structures with Integrated Reinforcement Mesh Based on Standard Reinforcement Bars
134. Wang Xiaoqi, Zuo Tianyi, Xu Yanling, Liu Xing et al. (2025-06)
     Reinforcement Learning-Based Continuous Path Planning and Automated Concrete 3D Printing of Complex Hollow Components
135. Ding Shengxuan, Li Jiren, Liu Yiming (2025-06)
     Study on Mechanical Properties and Environmental Benefits of 3D Printed Lean Magnesium Ore Concrete Filled Columns Based on Three-Dimensional Meso-Structure
136. Jacquet Yohan, Kawashima Shiho, Spangenberg Jon (2025-06)
     Unveiling the Structural Build-up 3D Printable Cement-Based Materials:
     From Small Amplitude Oscillatory Shear (SAOS) To Extensional (SAOE) Rheological Workflows
137. Mansour Ali, Abou Khalil Amine, Khoury Hiam (2025-06)
     Toward Spatial and Cognitive Human-Robot Interaction:
     A Game-Based Simulation for Concrete 3D Printing in Construction
138. Radl Elisabeth, Pfleger Marc-Patrick, Sieh Alexander, Vill Markus (2025-06)
     Conceptual Design and Production of a 3D Printed Concrete Base Brick with Evaluation of Its Thermal Properties
139. Karamara Merve, Bogdanski Moritz-Ole, Zöller Raphael, Albrecht Sophie et al. (2025-06)
     Increasing Efficiency and Sustainability:
     A Comparative Analysis of Concrete 3D Printing and Traditional Methods Based on Case Studies
140. Senf Ferdinand, Javed Rezan, Funke Henrik, Gelbrich Sandra (2025-06)
     Enhanced Environmental Sustainability of 3D-Printed Concrete Mixtures Based on Calcium Sulfoaluminate (CSA) and Blast Furnace Cement (CEM III/B)
141. Mahdy Deena, Marais Eugene, Abdelrahim Marwa, Dubor Alexandre et al. (2025-06)
     Life Cycle Assessment of Earth-Based Residential Unit “TOVA”:
     A 3D Printed On-Site Load-Bearing Structure
142. Mahdy Deena, Dara Seni, Abdelrahim Marwa (2025-06)
     Evaluating Structure Stability of Self-Supporting 3D Printed Earth-Based Cantilevers Using Robotic ARM
143. Warsi Syed, Panda Biranchi, Biswas Pankaj (2025-06)
     Design of Earthquake-Resistant 3D Printed Concrete Wall Based on ACI 318-19:
     Analytical Investigation and Numerical Modelling
144. Munemo Rue, Kruger Jacques, Zijl Gideon (2025-05)
     Surface Treatment of 3DPC Interlayers with Silicate-Based Solution for Enhanced Interfacial Bonding
145. Sun Yuhang, Wang Haonan, Zhang Yi, Liu Xiongfei et al. (2025-05)
     Spray-Based 3D Printed Foam Concrete:
     Stress Concentration Relieve Utilization
146. Asaue Hisafumi, Shiotani Tomoki, Okude Nobuhiro, Ogura Hiroki et al. (2025-05)
     Clarification of Fracture Behaviour of RC Pillar with 3D Concrete Printing Buried Formwork Based on Elastic Wave Technique
147. Tang Boyang, Yan Jiachuan, Han Xiaoyu, Lin Yini et al. (2025-05)
     Mechanical Properties of Extrusion-Based 3D-Printed Concrete Considering the Thickness of the Printed Layer and Printing Time Interval
148. Liu Wenliang, Ji Dongsheng, Cui Weijiu, Shi Xinyu et al. (2025-05)
     Research Progress on Quality Control Method of Concrete 3D Printing Based on Computer Vision
149. Jaji Mustapha, Babafemi Adewumi, Zijl Gideon (2025-05)
     Mechanical Performance of Extrusion-Based Two-Part 3D-Printed Geopolymer Concrete:
     A Review of Advances in Laboratory and Real-Scale Construction Projects
150. Luo Xiaoyu, Zhao Yuqi, Yao Xiaofei, Zou Cunjun et al. (2025-05)
     3D Printing Concrete Interface Treatment Based on Physical and Chemical Methods:
     A Review
151. Jia Yanhong, Chen Yao, Li Yanchen, Le Huirong (2025-05)
     Impacts of the Rheological Performance on Dynamic Printing of Metakaolin-Based Geopolymer
152. Kuang Hao, Deng Yang, Wang Dong, Jian Shouwei et al. (2025-05)
     Strengthening Effect of In-Situ Sprayed UV-Curable Polyurethane-Acrylate Resin Coating on Slag-Based 3D Printing Concrete
153. Liang Yingming, He Jincheng, Niu Like, Chen Junwei et al. (2025-05)
     Experimental Study on Printability of Solid Waste Concrete Based on 3D Printing Technology
154. Wang Guihua, Zhou Jiguo, Liu Haoyun, Zhang Jianming (2025-05)
     Rheological Properties and Mechanical Durability of 3D-Printed Concrete Based on Low-Field NMR
155. Chandra Jimmy, Halim Alvin, Budiman Franky, Pudjisuryadi Pamuda et al. (2025-05)
     Experimental Study of Bond Strength of Embedded Steel Reinforcement in Vibration-Based 3D Printed Concrete Mortar
156. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi et al. (2025-05)
     Modelling of 3D Concrete Printing Based on SPH Method with the Herschel-Bulkley-Papanastasiou Rheology Model
157. Hua Hao, Liu Yizhuo, Hovestadt Ludger, He Siyuan et al. (2025-04)
     Digital Nervi:
     Performance‐based Design of Lightweight Isostatic Ribbed Slab with 3D Printed Concrete Formwork
158. Huang Jianxiang, Wang Caifeng, Jian Shouwei, Tan Hongbo et al. (2025-04)
     Feasibility of Applying Attapulgite, Sodium Bentonite and Nano-Silica as a Viscosity Modifier Admixture for 3D Printing of Gypsum-Based Materials
159. Campos Guilherme, Lunelli Pietro, Moraes Elisângela, Souza Marcelo et al. (2025-04)
     Optimization of Clay-Based Ceramic Mixtures with Sugarcane Bagasse Fiber for 3D Printing
160. Jesus Manuel, Teixeira João, Guimarães Ana, Rangel Bárbara et al. (2025-04)
     From 3D Survey Data of Cultural Heritage Artifacts to 3D Printed Prototypes Based on Cement and Lime-Based Mortars
161. Ghodke Swapnil, Chowdhury Shubhankar, Singh Bhupinder (2025-04)
     Characterising Flexural Behaviour of Coarse Aggregate-Based 3D Printed Concrete Beams Using Acoustic Emission Technique
162. Thomsen Mette, Nicholas Paul, Chiujdea Ruxandra-Stefania, Nielsen Stine et al. (2025-04)
     Additive Manufacturing for Repair:
     Continual Construction Through Bio-Based Materials
163. Shi Ye, Han Li, Wu Pengtao, Dai Kaichao et al. (2025-04)
     Design of 3D Printing Green Ultra-High Performance Concrete Based on Binder System Optimization
164. Pederson Federico, Ellersick Liam, Kim Heejeong (2025-04)
     A Review of Lunar Regolith Based Alkali Activated Materials and Sintered Regolith for Use as a Construction Material
165. Liu Xiongfei, Yang Xiaojie, Sun Yuhang (2025-04)
     Synchronous Construction of Spray-Based 3D Printed Reinforced Concrete Structure:
     Effect of 2.5D Rebar Structure on the Flexural Performance of Slab
166. Xiao Yinan, Hack Norman, Kloft Harald, Lowke Dirk et al. (2025-03)
     Constraint-Based Form-Finding of Space Trusses for Injection 3D Concrete Printing Through Vector-Based Graphic Statics
167. Rajczakowska Magdalena (2025-03)
     Trends in Bio-Based 3D Concrete Printing:
     An NLP-Driven Analysis
168. Nassrullah Ghaith, Ali Mohd, Rub Rashid, Cho Cung-Suk et al. (2025-03)
     Optimizing Cement-Based Material Formulation for 3D Printing:
     Integrating Carbon Nanotubes and Silica Fume
169. Meyuhas Ohad, Larianovsky Pavel, Bentur Arnon, Magdassi Shlomo et al. (2025-03)
     Methods for Earth-Based Falsework in Multi-Material Additive Manufacturing at an Architectural Scale
170. Gautam Kushagra, Solav Dana, Barath Shany, Austern Guy (2025-03)
     Using Digital Image Correlation to Analyze Deformation in Wood-Based Liquid Deposition Modelling
171. Özalp Abdulkadir, Aldemir Alper (2025-03)
     Artificial Intelligence-Based Displacement Capacity Prediction Tool for Three-Dimensional Printed Concrete Walls
172. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Feys Dimitri et al. (2025-03)
     Evaluation of Fresh Properties of High Calcium Content Fly Ash-Based Alkali-Activated 3D-Printed Mortar
173. Aktürk Büşra, Ertuğrul Onur, Özen Ömer, Oktay Didem et al. (2025-03)
     Influence of Nano-Silica and R-MgO on Rheological Properties, 3D Printability, and Mechanical Properties of One-Part Sodium Carbonate-Activated Slag-Based Mixes
174. Liu Xiongfei, Guo Pei, Wang Haonan, Zhang Yi (2025-03)
     Spray-Based 3D Printed Cementitious Electromagnetic Wave Absorption Materials:
     Optimization with Structures Design
175. Akhrif Iatimad, Oulkhir Fatima, Jai Mostapha, Rihani Nadir et al. (2025-03)
     Earth-Based Materials 3D Printing, Extrudability and Buildability Numerical Investigations
176. Mortada Youssef, Hammoud Ahmad, Masoud Laith, Wyrzykowski Mateusz et al. (2025-02)
     3D Printable Ca(OH)2-Based Geopolymer Concrete with Steel Fiber Reinforcement
177. Kolawole John, Buswell Richard, Mahmood Sultan, Isa Muhammed et al. (2025-02)
     On the Origins of Anisotropy of Extrusion-Based 3D Printed Concrete:
     The Roles of Filament Skin and Agglomeration
178. Chadha Kunaljit, Vasey Lauren, Gramazio Fabio, Kohler Matthias (2025-02)
     Adaptive Robotic Tamping:
     A Novel Robotic Method for Formative Surface Finishing in Earth-Based Additive Manufacturing
179. Liu Xiongfei, Li Chuang, Guo Pei, Wang Li et al. (2025-02)
     Spray-Based 3D Printed Tunnel Slag Concrete:
     Evaluation for Printability and Mechanical Performance
180. Zavaleta Diana, Quispe Axcel, Rojas Omar, Silva Guido et al. (2025-02)
     3D-Printing of a Basic Housing Unit Prototype Using Earthen-Based Matrices Stabilized with Rice Husk Fibers
181. Gurunandan M., Nedunuri Aparna, Tanwar Jayant, Nanthagopalan Prakash et al. (2025-02)
     Development of 3D-Printable Alkali-Activated GGBFS and Fly-Ash-Binder-Based Mortars with Concrete-Demolition-Waste as Aggregates
182. Chourasia Ajay, Pal Biswajit, Kapoor Ashish (2025-02)
     Influence of Printing Direction and Interlayer Printing Time on the Bond Characteristics and Hardened Mechanical Properties of Agro-Industrial Waste-Based 3D Printed Concrete
183. Manny Agemar, Dehn Frank (2025-02)
     Basics of 3D Printing in Concrete Construction:
     Recommendations for Practice
184. Wu Changzhong, Lu Yuanyuan, Tian Jiaxin, Zhu Xingyu et al. (2025-01)
     Research on 3D Printed Section of Concrete Based on Robot Arm and Structural Design of Sprinkler Head
185. Pepe Marco, Lombardi Rosario, Lima Carmine, Paolillo Bruno et al. (2025-01)
     Experimental Evidence on the Possible Use of Fine Concrete and Brick Recycled Aggregates for 3D Printed Cement-Based Mixtures
186. Çapunaman Özgüç, Farrokhsiar Paniz, Bilén Sven, Duarte José et al. (2025-01)
     Vision-Based Sensing and Digital Twin-Technologies in Conformal 3D Concrete Printing:
     Exploring Operational Accuracy, Adaptability, and Scalability, and Investigating Monitoring-Capabilities in Large-Scale Applications
187. Oulkhir Fatima, Rihani Nadir, Akhrif Iatimad, Jai Mostapha (2025-01)
     Integration of Earth-Based Materials in 3D Concrete Printing:
     Physico-Chemical and Technological Characterization
188. Zhang Yonghong, Cui Suping, Yang Bohao, Wang Xinxin et al. (2025-01)
     Research on 3D Printing Concrete Mechanical Properties-Prediction-Model Based on Machine-Learning
189. Baş Sercan, Aydın Ozan, Bundur Zeynep, Guven Gursans (2025-01)
     Building Information Modeling (BIM)-Based On-Site 3D Printer Position-Optimization and Path-Planning for Digital Fabrication
190. Alam Shaurav, Gordon Stephen, Bassett Blake, Cobb Kevin et al. (2025-01)
     Three-Dimensional Printing of Fly-Ash-Based Geopolymer Materials
191. Zhang Yonghong, Cui Suping, Wang Xinxin, Yang Bohao et al. (2025-01)
     Microstructure and Performance of Recycled Wind Turbine Blade-Based 3D Printed Concrete
192. Obermeier Nico, Richter Christiane, Wiese Felix, Stengel Thorsten (2025-01)
     Low Global-Warming-Potential and Resource-Efficient 3D Printing Cement-Based Concrete
193. Omur Tarik, Akpunar Ahmet, Bingöl Ayşe, Oktay Büşra et al. (2025-01)
     The Influence of Phase-Change-Material Filled Three-Dimensional Printed Artificial Aggregates on the Properties of Blast-Furnace-Slag Based Alkali-Activated Concrete
194. Tinoco Matheus, Cavalcante Tiago, Andrade Luiza, Araújo Olga et al. (2025-01)
     Mix-Design-Strategies for 3D Printable Bio-Based Cementitious Composites Using Rice-Husk-Particles as Multifunctional Aggregates
195. Jiang Youbau, Gao Pengxiang, Adhikari Sondipon, Yao Xiaofei et al. (2024-12)
     Studies on the Mechanical Properties of Inter-Layer Interlocking 3D Printed Concrete Based on a Novel Nozzle
196. Zhao Zhihui, Cai Xianhuan, Chen Fan, Gong Yongfan et al. (2024-12)
     Effect of Wollastonite-Content on Rheology and Mechanical Properties of 3D Printed Magnesium-Potassium-Phosphate-Cement-Based Material of MgO-SiO2-K2HPO4
197. Zhang Yu, Yu Zhengxing, Zhang Yunsheng, Zhang Jiufu et al. (2024-12)
     Study on the Predictive Model for Continuous Build-Height of 3D Printed Concrete Based on Printability and Early Mechanical Properties
198. Zuo Zibo, Tao Yaxin, Corte Wouter (2024-12)
     Experimental Research of Concrete Temperature-Distribution During Large-Scale On-Site 3D Printing Based on Infrared-Thermal-Imaging
199. Luo Surong, Li Wenqiang, Cai Yili, Zhang Kaijian (2024-12)
     Effects of Carbonated Recycled Sand on the Interfacial Bonding Performance of 3D Printed Cement-Based Material
200. Zhao Hongyu, Jassmi Hamad, Liu Xianda, Wang Yufei et al. (2024-12)
     Artificial Intelligence-Based Microcracks Research in 3D Printing Concrete
201. Li Ben, Li Kaihang, Lyu Xuetao, Zhao Canhao et al. (2024-12)
     Microscopic Mechanism and Predicting Calculation on Mechanical Properties of Basalt-Fiber-Modified 3D Printing Cement-Based Materials
202. Ali Mohd, Rub Rashid, Banat Fawzi, Kim Tae-Yeon (2024-11)
     Enhancing the Printing Quality and Mechanical Properties of 3D Printed Cement Composites with Date-Syrup-Based Graphene-Coated-Sand Hybrid
203. Wu Mushuang, Wang Zixiao, Chen Yuxuan, Zhu Mengyu et al. (2024-11)
     Effect of Steel-Slag on Rheological and Mechanical Properties of Sulfoaluminate-Cement-Based Sustainable 3D Printing Concrete
204. Heinze Lisa, Liebringshausen Anne, Eversmann Philipp (2024-11)
     3D Printing with Wood Waste:
     Development of Reusable Printing Material Based on Waste Wood Particles and Its Digital Manufacturing Process for Wall Constructions in Architecture
205. Günzel F., Moelich Gerrit, Kanyenze Simba, Kruger Jacques et al. (2024-11)
     Investigating Inherent Cement Setting Mechanisms to Improve the Constructability Performance of Extrusion-Based 3D Concrete Printing
206. Kozub Barbara, Sitarz Mateusz, Gądek Szymon, Ziejewska Celina et al. (2024-11)
     Upscaling of Copper Slag-Based Geopolymer to 3D Printing Technology
207. Rajeev Pathmanathan, Sanjayan Jay (2024-11)
     Current Developments in the Application of Extrusion-Based 3D Concrete Printing
208. Kruger Jacques, Zijl Gideon (2024-11)
     A Structural Engineering Perspective on Extrusion-Based 3D Concrete Printing:
     From Green to Solid State
209. Wang Li, Lin Wenyu, Wan Qian, Li Zhijian et al. (2024-11)
     Manufacturing Accuracy Improvement of Concrete Product by Hybrid Additive-Subtractive Method Based on the Time-Dependent Characteristics of Cementitious Materials
210. Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
     Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
211. Wan Linxiaoyi, Liu Jingyang, Bard Joshua, Cupkova Dana (2024-11)
     Towards Adaptive Additive Manufacturing:
     Image-Based Monitoring for Binder Jet 3D Printing of Coarse Composite Concrete Powders
212. Khan Muhammad, Varadharajan Tharanesh, Keller Zachary, Meibodi Mania (2024-11)
     BioMatters:
     The Robotic 3D-Printed Biodegradable Wood-Based Formwork for Cast-in-Place Concrete Structures
213. Immelman Jandré, Pourbehi Mohammad, Ameh Alechine, Katambwe Vinny et al. (2024-11)
     Characterisation and Formulation of Waste Augmented 3D Printable Concrete for BIM-Based Automation
214. Lachmayer Lukas, Recker Tobias, Ekanayaka Virama, Hürkamp André et al. (2024-10)
     Multi-Model-Based Additive Manufacturing:
     A Framework for Automated Large-Scale 3D Concrete Printing with Industrial Robots
215. Wagner Juliana, Silveira Marcos, Vanderlei Romel, Das Sreekanta (2024-10)
     Comparative Analysis of Mold-Cast and 3D Printed Cement-Based Components:
     Implications for Standardization in Additive Construction
216. Li Zhengrong, Xing Wenjing, Wang Heyu, Sun Jingting (2024-10)
     The Effect of Heterogeneous Geometry on Steady-State Heat Transfer in Extrusion-Based 3D Printed Structures
217. Varela Hugo, Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo et al. (2024-10)
     3D Printable Cement-Based Composites Reinforced with Sisal-Fibers:
     Rheology, Printability and Hardened Properties
218. An Ning, Wang Huai, Le Liu, Li Shuo et al. (2024-10)
     Real-Time Monitoring of Extrudability and Buildability in 3D Concrete Printing Based on Target Detection Method
219. Dong Enlai, Jia Zijian, Jia Lutao, Rao Suduan et al. (2024-10)
     Modeling Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete Based on Stereology-Theory
220. Lan Tian, Yang Shutong, Xu Mingqi, Chen Zhengyuan et al. (2024-10)
     Quantitative Assessment of Interfacial-Fracture-Properties in 3D Printed Alkali-Activated Recycled Sand Concrete Based on a Closed-Form Fracture-Model
221. Martin Michael, Banijamali Kasra, Gilbert Hunter, Mascareñas David et al. (2024-09)
     LiDAR-Based Real-Time Geometrical Inspection for Large-Scale Additive Manufacturing
222. Aldabergenova Gaziza, Jexembayeva Assel, Konkanov Marat, Kirgizbayev Akpan et al. (2024-09)
     The Efficient Waste-Based Fine-Grained Fiber Concretes for 3D Printing
223. Chen Baixi, Zhao Xueqi, Qian Xiaoping (2024-09)
     Voxel-Based Path-Driven 3D Concrete Printing Process Simulation Framework Embedding Inter-Layer Behavior
224. Kamhawi Abdallah, Meibodi Mania (2024-09)
     Techniques and Strategies in Extrusion-Based 3D Concrete Printing of Complex Components to Prevent Premature Failure
225. Liu Xuelin, Sheng Haitao, Feng Binqing, Zhao Piqi et al. (2024-09)
     Effect of Potassium and Sodium-Based Electrolyzed Water on the Rheological Properties and Structural Build-Up of 3D Printed Cement Composites
226. Han Kang, Gu Fei, Yang Huashan, Tian Xinchen et al. (2024-09)
     PVA-Fiber-Reinforced Red Mud-Based Geopolymer for 3D Printing:
     Printability, Mechanical Properties and Microanalysis
227. Neef Tobias, Mechtcherine Viktor (2024-09)
     Continuous Fiber-Reinforcement for Extrusion-Based 3D Concrete Printing
228. Miranda Luiza, Lesage Karel, Schutter Geert, Roussel Nicolas (2024-09)
     Zone-Based Analysis of Layer Deformation in 3D Concrete Printing:
     Shoulder, Steady-State, and Foot Zones
229. Zhang Yi, Tittelboom Kim, Tao Yaxin, Zhang Yiyuan et al. (2024-09)
     Understanding Carbonation in 3D Printed Cement-Based Materials with Exposed Bottom Surface
230. Lachmayer Lukas, Quantz Jelle, Heeren Hauke, Recker Tobias et al. (2024-09)
     A Spatial Multi-Layer Control-Concept for Strand-Geometry-Control in Robot-Based Additive Manufacturing-Processes
231. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2024-09)
     Multi-Physics Modelling for Extrusion-Based 3D Printing:
     Material, Process and Applications
232. Mechtcherine Viktor, Taubert Markus, Müller Steffen, Butler Marko et al. (2024-09)
     Integration of Steel Reinforcement into Extrusion-Based 3D Concrete Printing of Monolithic Concrete Elements
233. Song Xinlei, Sun Xiaoyan, Wang Hailong (2024-09)
     Determination of Optimal Flowability of 3D Printing Concrete Based on Multi-Objective Optimization Method
234. Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2024-09)
     Real-Time Monitoring and Feedback Operation System for 3D Printed Concrete Based on Computer-Vision
235. Ertuğrul Onur, Özen Ömer, Oktay Didem, Yazar Tuğrul et al. (2024-09)
     Improvement of Rheological Properties and Printability of Sodium-Carbonate Activated Slag-Based Systems
236. Giulivo Marco, Menna Costantino, Capozzi Vittorio, Asprone Domenico (2024-09)
     Experimental Behavior of a 3D Printed Concrete Wall with Fixed Base Anchorage Subjected to In-Plane Cyclic Loads
237. Migliorino Jenna, Ahmed Aly, Mackin Anthony, Hanoun Zaid et al. (2024-09)
     Topology-Optimization-Based Additive Construction for Sustainability
238. Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
     Determination of Print Speed Based on the Fresh Mechanical Strength over Time of Additively Constructed Concrete by Unconfined Compression
239. Barry Mamadou, Jacquet Yohan, Kachkouch Fatima, Perrot Arnaud (2024-09)
     Instrumentation of the Extruder Nozzle Using Load Cells:
     Towards an In-Line Quality-Control Device for 3D Printed Cement-Based Materials
240. Kondepudi Kala, Gomzyakov Albert, Liebscher Marco, Mechtcherine Viktor (2024-09)
     3D Printing by Selective Activation of Geopolymer-Based Binders
241. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Bajāre Diāna et al. (2024-09)
     Development of 3D Printable Cement-Based Composite Containing Oil Shale Ash
242. Paritala Spandana, Singh Prashant, Kamakshi Tippabhotla, Subramaniam Kolluru (2024-09)
     Assessment of Printability of Concrete Based on Packing of Aggregates
243. Gomzyakov Albert, Taubert Markus, Sokolov Dmitrii, Reuter Uwe et al. (2024-09)
     Setup for ML-Based Prediction of Concrete Rheology from 3D Slump-Test-Geometry
244. Lacambra-Andreu Xavier, Scheel Mario, Poulesquen Arnaud (2024-09)
     Enhancing 3D Printability of Metakaolin-Based Geopolymers for Nuclear Waste Filtration Applications
245. Chen Yu, Zhang Yamei, Schlangen Erik, Çopuroğlu Oğuzhan (2024-09)
     Development of Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Desalination Brine
246. Yu Jie, Weng Yiwei, Teng Fei, Ye Junhong et al. (2024-09)
     Prediction of the Flexural Strength of 3D Printed SHCC Beams Based on a Stochastic Size-Dependent Model
247. Jiang Yu, Tabbaa Abir, Daly Ronan (2024-09)
     Effects of Time-Dependent Rheological Properties of Cementitious Materials on the Print Quality of Extrusion-Based 3D Printing
248. Rodriguez Fabian, Foster Kyle, Fross Xavier, Schmidt Roty et al. (2024-09)
     Use of a Lignin-Based Admixture for Tailoring the Rheological Properties of Mortars for 3D Printing
249. Jacquet Yohan, Perrot Arnaud (2024-09)
     Hygroscopic Insulation of Open Matrix Core Wall System as a Strategy to Enhance Buildability of 3D Printed Earth-Based Materials Structures
250. Bono Victor, Demont Léo, Ducoulombier Nicolas, Mesnil Romain et al. (2024-09)
     Large-Scale 3D Printing of a Shell Structure Reinforced by the Flow-Based Pultrusion Process
251. Zimmermann Stefan, Griego Danielle, Flatt Robert (2024-09)
     Visualizing Defects of Concrete 3D Printed Structures with Augmented Reality Based on Machine Learning-Driven Image-Analysis
252. Sadeghzadeh Benam Shaghayegh, Sandalci Ilgin, Bundur Zeynep, Bebek Özkan (2024-09)
     Bio-Based Additives to Improve the Rheology of High-Volume Fly-Ash Cement-Based Mortar for 3D Printing
253. Zhang Hongping, Duan Shuni, Hu Zhichao, Liu Litao et al. (2024-09)
     Evaluation of Plasticity and Determination of Deformation Index of 3D Printed Composite Cement-Based Materials
254. Sahu Akshay, Panda Biranchi (2024-08)
     A TSP-Based Continuous Path-Planning for Additive Manufacturing of Concrete
255. Disu Oluwatimilehin, Ismail Sikiru, Wood Luke, Chrysanthou Andreas et al. (2024-08)
     Design and Development of a Small-Scale Cement-Based 3D Printing Robot Extrusion Nozzle
256. Lo Tzu-Hsien, Liu Bosheng (2024-08)
     Overview of Injection Liquid Printing with Dredged-Based Material for Concrete Formwork
257. Farrokhsiar Paniz, Gürsoy Benay, Duarte José (2024-08)
     A Comprehensive Review on Integrating Vision-Based Sensing in Extrusion-Based 3D Printing Processes:
     Toward Geometric Monitoring of Extrusion-Based 3D Concrete Printing
258. Ahmad Lina, Jabi Wassim, Sosa Marco (2024-08)
     Non-Planar Robotic Printing of Earth-Based Material:
     A Case Study Using Cob-Like Mixture
259. Robayo-Salazar Rafael, Muñoz Miguel, Vargas Armando, Gutiérrez Ruby (2024-08)
     Effects of Incorporating Bentonite, Metakaolin, Microsilica, and Calcium-Carbonate on the Rheological Properties of Portland-Cement-Based 3D Printing Inks
260. Liu Xiongfei, Cai Huachong, Sun Yuhang, Wang Li et al. (2024-08)
     Spray-Based 3D Printed Foam-Concrete:
     Cooperative Optimization for Lightweight and High-Strength Performance
261. Zuo Wenqiang, Caneda-Martínez Laura, Keita Emmanuel, Aimedieu Patrick et al. (2024-08)
     Drying-Induced Damages in Exposed Fresh Cement-Based Materials at Very Early-Ages:
     From Standard Casting to 3D Printing
262. Pemas Sotirios, Sougioultzi Konstantina, Kouroutzidou Chrysoula, Stefanidou Maria et al. (2024-07)
     Enhancing Clay-Based 3D Printed Mortars with Polymeric Mesh Reinforcement Techniques
263. Prem Prabhat, Ambily Parukutty, Kumar Shankar, Giridhar Greeshma et al. (2024-07)
     Structural Build-Up-Model for Three-Dimensional Concrete Printing Based on Kinetics-Theory
264. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2024-07)
     Investigating the Interaction of Limestone-Calcined-Clay and OPC-Based Systems with a Methylhydroxyethyl-Cellulose-Based Viscosity-Modifier Used for 3D Printable Concrete
265. Aabbas Mohamed, Mahdaoui Mustapha, Ahachad Mohammed, Mazian Brahim et al. (2024-07)
     Advancing Sustainable Construction:
     Terracotta Component Development Through Extrusion-Based 3D Printing with Local Clay
266. Huang Zili, Yang Weiyi, Verma Rupesh, Nguyen Giang et al. (2024-07)
     Application of Adelaide-University-Snapback-Indirect-Tensile-Test on 3D Printed Cement-Based Materials
267. Souza Dias Leonardo, Anjos Marcos, Barbosa Marcella, Bezerra Ulisses (2024-07)
     Evaluation of Mix-Design Parameters Based on Basic Constitutive-Relationships for 3DCP Printing
268. Kamakshi Tippabhotla, Thakur Manideep, Subramaniam Kolluru (2024-07)
     Formulating Printable Concrete Mixtures Based on Paste-Rheology and Aggregate-Content:
     Application to Alkali-Activated Binders
269. Kladovasilakis Nikolaos, Pemas Sotirios, Pechlivani Eleftheria (2024-07)
     Computer-Aided Design of 3D Printed Clay-Based Composite Mortars Reinforced with Bio-Inspired Lattice Structures
270. Gleiser Leonie, Pierer Robin, Markin Slava, Butler Marko et al. (2024-07)
     Additive Manufacturing with Earth-Based Materials:
     Minimization of Shrinkage Deformation
271. Mai (née Dressler) Inka, Gosslar Joschua, Khader Noor, Lowke Dirk et al. (2024-07)
     Workflow for Earth-Based 3D Printing
272. Markovic Ivan, Horat Alexandra, Pantellini Danilo (2024-07)
     Optimization of Earth-Based Mixtures in Terms of 3D Printability and Mechanical Properties:
     Feasibility Study
273. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Mechtcherine Viktor, Sanjayan Jay (2024-07)
     Alkali-Activated Waste Glass-Based Geopolymer Concrete for Digital Construction
274. Trento Daniel, Faleschini Flora, Masoomi Maryam, Pellegrino Carlo et al. (2024-07)
     Additive Manufacturing for Earth-Based Materials:
     An Experimental Investigation
275. Zhang Yi, Tittelboom Kim, Schutter Geert, Jiang Zhengwu (2024-07)
     Active Rheology-Control for 3D Printable Cement-Based Materials by Temperature:
     An Exploratory Study
276. Zhang Xiaoyue, Huang Wanru, Chen Zhaohui (2024-07)
     Mechanical Behavior Investigation for the Timber-UHPC Shear Connector in 3D Printed Concrete-Based Composite Beam
277. Shao Lijing, Liu Zhaolong, Liu Qi, Wang Haochuan et al. (2024-07)
     A New Strategy to Enhance 3D Printability of Cement-Based Materials:
     In-Situ Polymerization
278. Sariyev Bakytzhan, Konysbekov Alisher, Jexembayeva Assel, Konkanov Marat (2024-07)
     A Comparative Study of the Rheological Properties of a Fly-Ash-Based Geopolymer Reinforced with PP-Fiber for 3D Printing:
     An Experimental and Numerical Approach
279. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2024-07)
     Hardening Properties and Microstructure of 3D Printed Engineered Cementitious Composites Based on Limestone-Calcined-Clay-Cement
280. Ivaniuk Egor, Tošić Zlata, Müller Steffen, Lordick Daniel et al. (2024-07)
     Automated Manufacturing of Reinforced Modules of Segmented Shells Based on 3D Printing with Strain-Hardening Cementitious Composites
281. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
     Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
282. Sando Mona, Stephan Dietmar (2024-06)
     The Development of a Fly-Ash-Based Geopolymer for Extrusion-Based 3D Printing, Along with a Printability Prediction Method
283. Zhou Zhijie, Geng Jian, Jin Chen, Liu Genjin et al. (2024-06)
     Influence of Residue Soil on the Properties of Fly-Ash-Slag-Based Geopolymer Materials for 3D Printing
284. Du Jiashuai, Wei Yazhi, Zhang Hui, Idriss Aboubaker (2024-06)
     Effects of Oyster-Shell-Derivatives on Performance Enhancement of Biomass-Based 3D Printed Concrete
285. Zhi Peng, Wu Yuching, Bai Meiyan (2024-06)
     Determining the Effect of Geometric and Dynamic Properties of Screws on Fiber-Orientation During FRC 3D Printing Based on Discrete Element Simulation
286. Yan Kang-Tai, Wang Xian-Peng, Ding Yao, Li Lingzhi et al. (2024-06)
     3D Printed LC3-Based Lightweight Engineered Cementitious Composites:
     Fresh State, Hardened Material-Properties and Beam-Performance
287. Li Haodao, Wei Jingjie, Khayat Kamal (2024-06)
     3D Printing of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials:
     From Mixture Design to Printability Evaluation
288. Lachmayer Lukas, Dittrich Lars, Recker Tobias, Dörrie Robin et al. (2024-06)
     In-Line Image-Based Reinforcement Detection for Concrete Additive Manufacturing Processes Using a Convolutional Neural Network
289. Matos Paulo, Prigol Hellen, Schackow Adilson, Silva Nazário Samara et al. (2024-06)
     Quality-Control-Tests of Fresh 3D Printable Cement-Based Materials
290. Mohamed Ibrahim, Senthil Kumar (2024-05)
     3D Printed Concrete Using Portland-Pozzolana-Cement:
     Fly-Ash-Based
291. Luo Surong, Li Wenqiang, Wang Dehui (2024-05)
     Study on Bending Performance of 3D Printed PVA-Fiber-Reinforced Cement-Based Material
292. Los Angeles Ortega Rosario Maria, Medina Melany, Duque Rafael, Alberto Jaén Ortega Antonio et al. (2024-05)
     Advancing Sustainable Construction:
     Insights into Clay-Based Additive Manufacturing for Architecture, Engineering, and Construction
293. Yan Kang-Tai, Li Lingzhi, Ye Junhong, Bazarov Dilshod et al. (2024-05)
     Anisotropic Size-Effect of 3D Printed LC3-Based Engineered Cementitious Composites
294. Kamakshi Tippabhotla, Subramaniam Kolluru (2024-05)
     Rheology-Control and 3D Concrete Printing with Fly Ash-Based Aqueous Nano-Silica Enhanced Alkali-Activated Binders
295. Liu Xiongfei, Zhao Xi, Wang Nan, Zhang Yi et al. (2024-05)
     Powder-Based 3D Printed Magnesium Phosphate Cement:
     Mechanical Isotropy Optimization Using Borax
296. Jiang Wei, Li Wenqian, Chen Xi (2024-05)
     An Extended Numerical Model of the First Exothermic Peak for Three Dimensional Printed Cement-Based Materials
297. Yang Jin, Zhai Gaoyuan, He Xingyang, Tang Yuanzhen et al. (2024-05)
     Properties and Microstructure of a Low-Carbon Clinker-Free Cementitious Binder and Its Extrusion-Based Printing Performance
298. Cavalcante Tiago, Toledo Filho Romildo, Mendoza Reales Oscar (2024-05)
     Influence of Recycled Concrete-Powder on Rheology of Printable Cement-Based Matrixes
299. Lo Tzu-Hsien, Liu Bosheng (2024-04)
     Extruding Dredged-Based Material for Concrete Formwork through Rapid-Liquid-Printing
300. Wang Xiangyu, Krishnan Padmaja, Celik Kemal (2024-04)
     Enhancing Carbonation and Thermal Insulation of Reactive Magnesium Oxide Cement (RMC)-Based 3D Printable Pastes with Cenospheres
301. Mustafa Azamat, Storch Florian, Rustem Kairov, Plashnik Paul et al. (2024-04)
     Compensation Manipulator for Concrete 3D Printing Based on the CONPrint3D
302. Tao Yaxin, Zhou Jiangang, Cui Weijiu, Shi Xinyu et al. (2024-04)
     Numerical Assessment of Plastic Yielding in Extrusion-Based 3D Concrete Printing
303. Xia Kailun, Chen Yuning, Chen Yu, Jia Zijian et al. (2024-04)
     Understanding and Modeling the Plastic Deformation of 3D Printed Concrete Based on Viscoelastic Creep Behavior
304. Wang Jun, Liu Zhenhua, Hou Jia, Ge Mengmeng (2024-04)
     Research-Progress and Trend-Analysis of Concrete 3D Printing Technology Based on CiteSpace
305. Zhang Hongping, Duan Shuni, Han Qi, He Qiangqiang et al. (2024-03)
     Strength and Proportioning Design of 3D Printed Concrete (3DPC) Based on Aggregate-Gradation-Optimization
306. İlcan Hüseyin, Külak Adnan, Şahmaran Mustafa (2024-03)
     3D Printable Construction and Demolition Waste-Based Geopolymer:
     Investigating the Effects of Additives on Engineering Properties
307. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2024-03)
     Durability and Pore-Structure of Metakaolin-Based 3D Printed Geopolymer Concrete
308. Zhu Lingli, Zhao Wanting, Zhao Yu, Guan Xuemao (2024-03)
     Mechanism Analysis of Rheological Properties of 3D Printed Steel-Slag Cementitious Composite Based on Low-Field Nuclear-Magnetic-Relaxation-Test
309. Soda Prabhath, Dwivedi Ashutosh, Sahana C., Gupta Souradeep (2024-03)
     Development of 3D Printable Stabilized Earth-Based Construction Materials Using Excavated Soil:
     Evaluation of Fresh and Hardened Properties
310. Latorraca Tássia, Guimarães Ana, Rangel Bárbara (2024-03)
     Bibliometric Analysis of Personalized 3D Printed Concrete-Based Modules for Construction:
     Leveraging the Ordinatio Method
311. Zhang Yi, Ren Qiang, Dai Xiaodi, Tao Yaxin et al. (2024-03)
     A Potential Active Rheology-Control Approach for 3D Printable Cement-Based Materials:
     Coupling of Temperature and Viscosity-Modifiers
312. Barjuei Erfan, Capitanelli Alessio, Bertolucci Riccardo, Courteille Eric et al. (2024-03)
     Digital Workflow for Printability Checking and Prefabrication in Robotic Construction 3D Printing Based on Artificial Intelligence Planning
313. Chen Meng, Fang Shuai, Wang Guangquan, Xuan Yiwei et al. (2024-03)
     Compressive and Flexural Behavior of Engineered Cementitious Composites-Based Auxetic Structures:
     An Experimental and Numerical Study
314. Robayo-Salazar Rafael, Vargas Armando, Martínez Fabio, Gutiérrez Ruby (2024-02)
     Utilization of Powders and Fine Aggregates from the Recycling of Construction and Demolition Waste in the 3D Printing of Portland-Based Cementitious Materials
315. Liu Xiongfei, Wang Nan, Zhang Yi, Ma Guowei (2024-02)
     Optimization of Printing Precision and Mechanical Property for Powder-Based 3D Printed Magnesium Phosphate Cement Using Fly-Ash
316. Ziada Mahmoud, Tanyildizi Harun, Seloglu Maksut, Coskun Ahmet (2024-02)
     Bacteria-Based Crack-Healing of 3D Printed PVA-Fiber-Reinforced Geopolymer Mortars
317. Giudice Lorenzo, Katsamakas Antonios, Liu Bowen, Sarhosis Vasilis et al. (2024-02)
     Physical Modelling of Unreinforced Masonry Walls Using a Sand-Based 3D Printer
318. Silva Guido, Quispe Axcel, Baldoceda Jordan, Kim Suyeon et al. (2024-02)
     Additive Construction of Concrete Deep Beams Using Low-Cost Characterization Methods and FEM-Based Topological Optimization
319. Gündüz Gamze, Özkar Mine (2024-02)
     A Process-Based Framework for Adaptable Modules in Robotic Clay 3D Printing
320. Susmel Luca (2024-02)
     Theory of Critical Distances and Notched Filament-Based 3D Printed Components:
     Lessons Learned from Polymers and Concrete
321. Li Weihong, Chen Xuhao, Wang Yaoyu, Wan Detian et al. (2024-02)
     Effect of Embedded Filament Fibers on Mechanical Properties of 3D Printing Cement-Based Materials
322. Keita Emmanuel, Perrot Arnaud (2024-02)
     Processing of Earth-Based Materials:
     Current Situation and Challenges Ahead
323. Khan Shoukat, İlcan Hüseyin, Imram Ramsha, Aminipour Ehsan et al. (2024-01)
     The Impact of Nozzle-Diameter and Printing Speed on Geopolymer-Based 3D Printed Concrete Structures:
     Numerical Modeling and Experimental Validation
324. Buson Márcio, Varum Humberto, Rezende Marco (2024-01)
     First Impressions on Three-Dimensional Printing with Earth-Based Mortar at the Faculty of Engineering of the University of Porto
325. Liu Xiongfei, Cai Huachong, Ma Guowei, Hou Guanyu (2024-01)
     Spray-Based 3D Concrete Printing-Parameter Design-Model:
     Actionable Insight for High Printing Quality
326. Pi Yilin, Lu Cong, Yao Yiming, Li Baoshan (2024-01)
     A Rheological-Based Printability-Assessment Method for 3D Printing Engineered Cementitious Composites Considering Fiber-Dispersion
327. Pavlin Majda, Horvat Barbara, Cerc Korošec Romana, Capuder Rok et al. (2024-01)
     Characterisation of a 3D Printed Alkali-Activated Material Based on Waste-Mineral-Wool at Room and Elevated Temperatures
328. Altıparmak Sadettin, Daminabo Samuel (2024-01)
     Suitability-Analysis for Extrusion-Based Additive Manufacturing Process
329. Tang Yuxiang, Xiao Jianzhuang, Ding Tao, Liu Haoran et al. (2024-01)
     Trans-Layer and Inter-Layer Fracture Behavior of Extrusion-Based 3D Printed Concrete Under Three-Point Bending
330. Chadha Kunaljit, Dubor Alexandre, Cabay Edouard, Tayoun Yara et al. (2024-01)
     Additive Manufacturing for the Circular Built Environment:
     Towards Circular Construction with Earth-Based Materials
331. Rocha Douglas, Faria Paulina, Lucas Sandra (2023-12)
     Additive Manufacturing of Earth-Based Materials:
     A Literature Review on Mortar-Composition, Extrusion, and Processing Earth
332. Khan Shayan, Ghazi Syed, Amjad Hassan, Imram Muhammad et al. (2023-12)
     Emerging Horizons in 3D Printed Cement-Based Materials with Nano-Material-Integration:
     A Review
333. Li Feng, Zhang Rongrong, Zhou Siqi, Zhu Xingyi (2023-12)
     Printability and Hardening Performance of Three-Dimensionally-Printed Geopolymer Based on Lunar Regolith Simulant for Automated Construction of Lunar Infrastructure
334. Wu Yuching, Chen Huaikun, Zhi Peng, Zhu Peng et al. (2023-12)
     Effect of 3D Printing Geometrical Monocline on Behaviors of Curved Timoshenko Beams Based on Isogeometric Analyses
335. Acuña Tomás, Avendaño Martín, García-Alvarado Rodrigo, Banda Pablo et al. (2023-12)
     Parametric Design of Multipurpose 3D Printed Walls Based on Roberto Matta´s Drawings
336. Ambily Parukutty, Rajendran Neeraja, Kaliyavaradhan Senthil (2023-11)
     Mix-Design, Optimization and Performance-Evaluation of Extrusion-Based 3D Printable Concrete
337. Zavaleta Diana, Ñañez Robert, Silva Guido, Ruiz Gaby et al. (2023-11)
     Additive Construction Using Enhanced Earthen-Based Composites:
     Improvement of the Mechanical Strength and Water Durability Using Chitosan and Agave-Fibers
338. Chen Yu, Rahmani Hossein, Schlangen Erik, Çopuroğlu Oğuzhan (2023-11)
     An Approach to Develop Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Calcium-Nitrate
339. Liu Huawei, Liu Chao, Zhang Yamei, Bai Guoliang (2023-11)
     Bonding Properties Between 3D Printed Coarse Aggregate Concrete and Rebar Based on Interface Structural Characteristics
340. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-11)
     Slag-Modified Metakaolin-Based 3D Printed Geopolymer:
     Mechanical Characterisation, Microstructural Properties, and Nitrogen Physisorption Pore-Analysis
341. Wu Hao, Li Yu, Xie Xingje, Gao Xiaofan et al. (2023-11)
     Structural Performance-Based 3D Concrete Printing for an Efficient Concrete Beam
342. Jauk Julian, Vašatko Hana, Gosch Lukas, Ristoski Kristijan et al. (2023-11)
     Coextrusion of Clay-Based Composites:
     Using a Multi-Material Approach to Achieve Gradient Porosity in 3D Printed Ceramics
343. Chernysheva Natalia, Shatalova Svetlana, Lesovik Valeriy, Kozlov Pavel (2023-11)
     Deformation Characteristics of Dense and Foamed Mortars Based on Cement and Gypsum-to-Cement Binders for 3D Printing
344. Dimitriou Savvas, Kontovourkis Odysseas (2023-11)
     Force-Flow Based 3D Printing of Structural Elements Inspired by the Traditional Architecture of Cross-Vaults
345. Imagawa Koichi, Ohno Motohiro, Ishida Tetsuya (2023-11)
     An Experimental Study on Energy-Absorption-Capability of Cast and 3D Printed Architected Cement-Based Materials
346. Lu Bing, Li Ziyang, Li Mingyang, Feng Jianhang et al. (2023-11)
     Substitution of Cement by Marine-Clay in Spray-Based 3D Concrete Printing
347. Tabassum Nusrat, Duarte José, Nazarian Shadi (2023-11)
     Advancing 3D Concrete Printing for Affordable Housing:
     A Shape Grammar-Based Approach to Print Spanning-Roof Structures
348. Reinold Janis, Daadouch Koussay, Meschke Günther (2023-11)
     Numerical Simulation of Three Dimensional Concrete Printing Based on a Unified Fluid and Solid Mechanics Formulation
349. Naboni Roberto, Zomparelli Alessandro, Kunic Anja, Breseghello Luca (2023-11)
     Design, Robotic Fabrication and Augmented Construction of Low-Carbon Concrete Slabs Through Field-Based Reaction-Diffusion
350. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-10)
     Comparative Studies of LC³- and Fly-Ash-Based Blended Binders in Fiber-Reinforced Printed Concrete:
     Rheological and Quasi-Static Mechanical Characteristics
351. Christ Julian, Leusnik Sander, Koss Holger (2023-10)
     Multi-Axial 3D Printing of Biopolymer-Based Concrete Composites in Construction
352. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2023-10)
     From Soil to Printed Structures:
     A Systematic Approach to Designing Clay-Based Materials for 3D Printing in Construction and Architecture
353. Thib Raghed, Belayachi Naima, Bouarroudj Mohamed, Bulteel David et al. (2023-10)
     A Methodology for Designing 3D Printable Mortar Based on Recycled Sand
354. Genc Gokhan, Demircan Ruya, Beyhan Figen, Kaplan Gökhan (2023-10)
     Assessment of the Sustainability and Producibility of Adobe-Constructions Reinforced with Ca-Based Binders:
     Environmental Life-Cycle-Analysis and 3D Printability
355. Pan Tinghong, Guo Rongxin, Fu Chaoshu, Ji Xuping et al. (2023-10)
     Extrusion-Based 3D Concrete Printing with Different Flow-Direction
356. Sun Houchao, Li Furong, Shi Feiting (2023-10)
     Experimental Study on Dynamic Mechanical Properties of 3D Printed Cement-Based Materials Under Splitting Tension After High Temperature
357. Lv Zhenyuan, Xiao Jianzhuang, Duan Zhenhua, Tang Yuxiang (2023-09)
     Time-Dependent Evolution and Strength Modulation of 3D Printed Concrete Pore-Structure Based on Microbial Remediation
358. Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
     A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
     From Analytical Modelling to Numerical Simulation
359. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2023-09)
     Printability and Early Mechanical Properties of Material-Composition Modified 3D Printing Engineered Cementitious Composites Based on the Response-Surface-Methodology
360. Beersaerts Glenn, Soete Jeroen, Giels Michiel, Eykens Lies et al. (2023-09)
     3D Printing of an Iron-Rich Slag-Based Hybrid Mortar:
     A Durable, Sustainable and Cost-Competitive Product?
361. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2023-09)
     Effect of Nano-Clay on the Printability of Extrusion-Based 3D Printable Mortar
362. Saadati Farzaneh, Kani Ebrahim (2023-09)
     Phosphorous Slag-Based Geopolymer Cement Incorporate with Mullite for 3D Printing Application
363. Khademi Pooria, Toufigh Vahab (2023-09)
     Data-Driven-Based Ultrasonics-Analysis for Evaluating the Bond-Strength of Concrete-Layers
364. Zhang Huan, Cao Shuai, Yilmaz Erol (2023-09)
     Polymer Shape Effect on Damage-Evolution, Internal Defects and Crack Propagation of 3D Printed Polymer-Based Cementitious Backfill
365. Jewett Jackson, Carstensen Josephine (2023-09)
     Topology-Optimization for Material-Extrusion-Based Additive Manufacturing-Processes with Weak Bead Bonding
366. Kogai A., Puzatova (nee Sharanova) Anastasiia, Dmitrieva Maria (2023-09)
     Modification of Fine Multicomponent Concrete with Activated Component-Based Additive
367. Yin Yunchao, Huang Jian, Wang Tiezhu, Yang Rong et al. (2023-09)
     Effect of Hydroxypropyl-Methylcellulose on Rheology and Printability of the First Printed Layer of Cement Activated Slag-Based 3D Printing Concrete
368. Li Te, Tier Laire (2023-09)
     Analysis of the Effect of Glass-Powder on the Printability of Cement-Based Materials for 3D Printing Using ImageJ
369. Hu Hailong, Huang Jian, Wang Tiezhu, Manuka Mesfin et al. (2023-09)
     Impact of Calcium Sulfoaluminate Cement on Printability and Early Strength Development of a Slag-Based 3D Printing Cementitious Material
370. Ji Xuping, Pan Tinghong, Liu Xingyao, Zhao Wenhao et al. (2023-09)
     Characterization of Thixotropic Properties of Fresh Cement‐Based Materials
371. Yue Hongfei, Zhang Zhuxian, Hua Sudong, Gao Yanan et al. (2023-09)
     Solid Waste-Based Set-on-Demand 3D Printed Concrete:
     Active Rheological-Control of Cement-Based Magneto-Rheological Fluids
372. Chen Yidong, Zhang Yunsheng, Zhang Yu, Pang Bo et al. (2023-08)
     Influence of Gradation on Extrusion-Based 3D Printing Concrete with Coarse Aggregate
373. Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
     Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
     Effect of Operational- and Material-Oriented Parameters
374. Lachmayer Lukas, Müller Nico, Herlyn Thilo, Raatz Annika (2023-08)
     Volume Flow-Based Process-Control for Robotic Additive Manufacturing-Processes in Construction
375. Paritala Spandana, Singaram Kailash, Bathina Indira, Khan Mohd et al. (2023-08)
     Rheology and Pumpability of Mix Suitable for Extrusion-Based Concrete 3D Printing:
     A Review
376. Tarhan Yeşim, Perrot Arnaud (2023-08)
     Reinforcement of 3D Printable Earth-Based Mortar with Natural Textile-Material
377. Chen Mingxu, Jin Yuan, Sun Keke, Wang Shoude et al. (2023-08)
     Study on the Durability of 3D Printed Calcium-Sulphoaluminate Cement-Based Materials Related to Rheology-Control
378. Zhang Yi, Zhu Yanmei, Ren Qiang, He Bei et al. (2023-08)
     Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials
379. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-08)
     Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer for 3D Concrete Printing Application:
     Evaluating Fresh and Hardened Properties
380. Chen Quanyao, Gao Yuyue, Ding Lieyun, Cheng Zhou et al. (2023-07)
     Genetic Algorithm-Based Multiobjective Optimization for 3D Printable Design of a Double-Shell Lunar-Habitat-Structure
381. Salah Husam, Mutalib Azrul, Kaish Amrul, Syamsir Agusril et al. (2023-07)
     Development of Ultra-High-Performance Silica-Fume-Based Mortar Incorporating Graphene-Nano-Platelets for 3D Concrete Printing Application
382. Rahal Said, Kaci Abdelhak, Skoudarli Abdeslam (2023-07)
     Evaluation of Mechanical Anisotropy-Induced by 3D Printing Process for Earth-Based Materials
383. Zhu Lingli, Zhang Meng, Zhang Yaqi, Yao Jie et al. (2023-07)
     Research Progress on Shrinkage Properties of Extruded 3D Printed Cement-Based Materials
384. Geng Songyuan, Long Wujian, Luo Qiling, Fu Junen et al. (2023-07)
     Intelligent Prediction of Dynamic Yield-Stress in 3D Printing Concrete Based on Machine Learning
385. Placzek Gerrit, Schwerdtner Patrick (2023-07)
     Concrete Additive Manufacturing in Construction:
     Integration Based on Component-Related Fabrication-Strategies
386. Mohiuddin Rafay, Cruz Policroniades Miranda, Slepicka Martin, Borrmann André (2023-07)
     Optical Process-Control for Extrusion-Based Additive Manufacturing-Methods in Construction
387. Çapunaman Özgüç, Iseman Emily, Gürsoy Benay (2023-07)
     Material in the Loop Fabrication:
     A Vision-Based Adaptive Clay 3D Printing Workflow on Indeterminate Sand Surfaces
388. Senthilnathan Shanmugaraj, Raphael Benny (2023-07)
     Quality Monitoring of Concrete 3D Printed Elements Using Computer-Vision-Based Texture Extraction Technique
389. Wang Fei, Hua Sudong, Chen Tingzhu, He Bijuan et al. (2023-07)
     Effect of Nano-Clay and PCE on the Buildability of Ultra-Fine Dredged Sand-Based 3D Printing Materials
390. Jaji Mustapha, Kamoru A., Zijl Gideon, Babafemi Adewumi (2023-07)
     Effect of Anisotropy on Permeability Index and Water-Absorption of 3D Printed Metakaolin-Based Geopolymer Concrete
391. Kajzr Daniel, Myslivec Tomáš, Černohorský Josef (2023-07)
     An Open PLC-Based Robot-Control-System for 3D Concrete Printing
392. Schönsee Eric, Hüsken Götz, Jeyifous Olubunmi, Mezhov Alexander et al. (2023-06)
     Calculating Rheological Properties of Fresh Mortar for Additive Manufacturing Based on Experimental, Multi-Sensor Data
393. Mortada Youssef, Masad Eyad, Kogbara Reginald, Mansoor Bilal et al. (2023-06)
     Development of Ca(OH)2-Based Geopolymer for Additive Manufacturing Using Construction Wastes and Nano-Materials
394. Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2023-06)
     The Development of Soil-Based 3D Printable Mixtures:
     A Mix-Design Methodology and a Case Study
395. Robayo-Salazar Rafael, Martínez Fabio, Vargas Armando, Gutiérrez Ruby (2023-06)
     3D Printing of Hybrid Cements Based on High Contents of Powders from Concrete, Ceramic and Brick Waste Chemically Activated with Sodium Sulphate (Na2SO4)
396. Jacquet Yohan, Perrot Arnaud (2023-06)
     Evolutionary Approach Based on Thermoplastic Bio-Based Building Material for 3D Printing Applications:
     An Insight into a Mix of Clay and Wax
397. Sahoo Pitabash, Gupta Souradeep (2023-06)
     3D Printable Earth-Based Alkali-Activated Materials:
     Role of Mix-Design and Clay-Rich Soil
398. Xu Zhuoyue, Zhang Dawang, Li Hui, Yin Le et al. (2023-06)
     Effects of Additives on the Mechanical Properties, Rheology, and Printing Properties of PCC-Based 3DPMs
399. Xu Zhuoyue, Zhang Dawang, Li Hui, Jin Haoyu et al. (2023-06)
     Mix-Design and 3D Printing Correlation-Performance of PCC-Based 3DPM
400. Obermeier Nico, Wiese Felix, Kustermann Andrea, Stengel Thorsten (2023-06)
     3D Printing Cement-Based Materials Using 100% of Recycled Aggregates
401. Pietras Daniel, Zbyszyński Wojciech, Sadowski Tomasz (2023-06)
     A 3D Printing Method of Cement-Based FGM Composites Containing Granulated Cork, Polypropylene Fibers, and a Polyethylene Net Inter-Layer
402. Ali Ammar, Riaz Raja, Malik Umair, Abbas Syed et al. (2023-06)
     Machine-Learning-Based Predictive-Model for Tensile and Flexural Strength of 3D Printed Concrete
403. Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2023-05)
     Microstructure and Mechanical Properties of Inter-Layer Regions in Extrusion-Based 3D Printed Concrete:
     A Critical Review
404. Liu Zhenbang, Li Mingyang, Moo Guo, Kobayashi Hitoshi et al. (2023-05)
     Effect of Nano-Structured Silica-Additives on the Extrusion-Based 3D Concrete Printing Application
405. Sobek Werner, Schmeer Daniel (2023-05)
     Graded Concrete (2. Generation):
     The Combination of Hollow-Core Construction with Trajectory-Based Reinforcement
406. Hanifa Mohamad, Figueiredo Bruno, Mendonça Paulo (2023-04)
     Additive Manufacturing Earth-Based Composite:
     Strategical and Computational Methodology for Building-Shell-Geometries
407. Joshi Arpan, Carvalho Tomás, Gaspar Florindo (2023-04)
     Incorporation of Forest Biomass-Based Fly-Ash in Cement for 3D Printing
408. Simedru Alexandru, Becze Anca, Cadar Oana, Scurtu Daniela et al. (2023-04)
     Structural Characterization of Several Cement-Based Materials Containing Chemical Additives with Potential Application in Additive Manufacturing
409. Wang Youyu, Ma Guowei, Wang Li, Zhang Wengang et al. (2023-04)
     Size-Effects in Cavern-Model-Tests Based on 3D Printing
410. Besklubova Svetlana, Tan Bing, Zhong Ray, Spicek Nikola (2023-04)
     Logistic-Cost-Analysis for 3D Printing Construction Projects Using a Multi-Stage Network-Based Approach
411. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Gowripalan Nadarajah (2023-04)
     Effects of Different Orientation-Angle, Size, Surface-Roughness, and Heat-Curing on Mechanical Behavior of 3D Printed Cement-Mortar with and without Glass-Fiber in Powder-Based 3DP
412. Jaji Mustapha, Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-04)
     Thixotropic Characterisation of Slag-Modified 3D Printable Metakaolin-Based Geopolymer Composite
413. Ramezani Amir, Modaresi Shahriar, Dashti Pooria, Givkashi Mohammad et al. (2023-04)
     Effects of Different Types of Fibers on Fresh and Hardened Properties of Cement and Geopolymer-Based 3D Printed Mixtures:
     A Review
414. Salam Mohammad Abdul, Biernacki Joseph (2023-04)
     2D Stationary Computational Printing of Cement-Based Pastes with Time-Dependent Rheology
415. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-03)
     Influence of Effective Micro-Organisms on the Rheology and Fresh State Properties of SCMs-Based Concrete for Digital Fabrication
416. Chen Hao, Zhang Daobo, Chen Peng, Li Ning et al. (2023-03)
     A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing
417. Panda Biranchi, Tran Jonathan (2023-03)
     Material-Design, Additive Manufacturing, and Performance of Cement-Based Materials
418. Ekanayaka Virama, Hürkamp André (2023-03)
     Implementation of a Surrogate-Model for a Novel Path‐Based Finite-Element-Simulation for Additive Manufacturing-Processes in Construction
419. Cui Weijiu, Wang Tianheng, Chen Xu, Shen Wenkai et al. (2023-03)
     Study of 3D Printed Concrete with Low-Carbon Cementitious Materials Based on Its Rheological Properties and Mechanical Performances
420. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2023-03)
     Developing 3D Printable and Buildable Limestone-Calcined-Clay-Based Cement Composites with Higher Aggregate Content
421. Yao Xiaofei, Lyu Xin, Sun Junbo, Wang Bolin et al. (2023-03)
     AI-Based Performance Prediction for 3D Printed Concrete Considering Anisotropy and Steam-Curing Condition
422. Onanuga Babajide, Biernacki Joseph (2023-03)
     Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials
423. Chaiyotha Danai, Kantawong Watcharapong, Payakanitia Panjasila, Pinitsoontorn Supree et al. (2023-03)
     Finding Optimized Conditions for 3D Printed High-Calcium Fly-Ash-Based Alkali-Activated Mortar
424. Ma Xiaosong, Tan Linzhen, Lu Yuanjing, Yao Wu et al. (2023-03)
     Upcycling of Waste Plasterboard for the Synthesis of High-Quality Gypsum-Based 3D Printing-Powder
425. Ma Guowei, Hu Tingyu, Wang Fang, Liu Xiongfei et al. (2023-02)
     Magnesium Phosphate Cement for Powder-Based 3D Concrete Printing:
     Systematic Evaluation and Optimization of Printability and Printing Quality
426. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Das Utpal et al. (2023-02)
     Optimization of Mix Proportion of 3D Printable Mortar Based on Rheological Properties and Material-Strength Using Factorial Design of Experiment
427. Ishida Takato, Nakada Kiyofumi (2023-02)
     Review of Rheology in Cement-Based Materials and Its Application to 3D Printing Using Concrete
428. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2023-02)
     Printing Quality-Control of Cement-Based Materials Under Flow and Rest-Conditions
429. Basha Shaik, Rehman Atta, Aziz Md, Kim Jung-Hoon (2023-02)
     Cement Composites with Carbon-Based Nanomaterials for 3D Concrete Printing Applications:
     A Review
430. Liu Qiang, Jiang Quan, Zhou Zhenhua, Xin Jie et al. (2023-02)
     The Printable and Hardened Properties of Nano-Calcium Carbonate with Modified Polypropylene-Fibers for Cement-Based 3D Printing
431. Parisi Fabio, Sangiorgio Valentino, Parisi Nicola, Mangini Agostino et al. (2023-01)
     A New Concept for Large Additive Manufacturing in Construction:
     Tower-Crane-Based 3D Printing Controlled by Deep-Reinforcement-Learning
432. Tran Mien, Vu Tran, Nguyen Thi (2023-01)
     Simplified Assessment for One-Part 3D Printable Geopolymer Concrete Based on Slump and Slump-Flow Measurements
433. Chu Shaohua, Yang En-Hua, Unluer Cise (2023-01)
     Development of Nanofiber-Reinforced Reactive Magnesia-Based Composites for 3D Printing
434. Matos Ana, Emiroğlu Mehmet, Subaşı Serkan, Maraşlı Muhammed et al. (2023-01)
     Architectonic Cement-Based Composites 3D Printing
435. Chun Seung-Yeop, Kim Su-jin, Kim Woon-Gi, Lee Geumyeon et al. (2022-12)
     Powder-Bed-Based 3D Printing with Cement for Sustainable Casting
436. Li Zihan, Liu Huanbao, Cheng Xiang, Nie Ping et al. (2022-12)
     Improvement of 3D Printing Cement-Based Material-Process:
     Parameter Experiment and Analysis
437. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2022-12)
     Earth-Based Additive Manufacturing:
     A Field-Oriented Methodology for Evaluating Material-Printability
438. Korniejenko Kinga, Setlak (nee Pławecka) Kinga, Kozub Barbara (2022-12)
     An Overview for Modern Energy-Efficient Solutions for Lunar and Martian Habitats Made Based on Geopolymers Composites and 3D Printing Technology
439. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Ozcelikci Emircan et al. (2022-12)
     Rheological Property and Extrudability Performance-Assessment of Construction and Demolition Waste-Based Geopolymer Mortars with Varied Testing Protocols
440. Qing Longbang, Sun Honglei, Zhang Yuebo, Mu Ru et al. (2022-12)
     Research Progress on Aligned Fiber-Reinforced Cement-Based Composites
441. Liu Xiongfei, Li Jixiang, Li Qi, Hou Gunayu (2022-11)
     Mechanical Performance Optimization in Spray-Based Three-Dimensional-Printed Mortar Using Carbon-Fiber
442. Wang Lining, Aslani Farhad (2022-11)
     Structural Performance of Reinforced Concrete Beams with 3D Printed Cement-Based Sensor Embedded and Self-Sensing Cementitious Composites
443. Rech Arianna, Chiujdea Ruxandra-Stefania, Colmo Claudia, Rossi Gabriella et al. (2022-11)
     Waste-Based Biopolymer-Slurry for 3D Printing Targeting Construction Elements
444. Melichar Jindřich, Žižková Nikol, Brožovský Jiří, Mészárosová Lenka et al. (2022-11)
     Study of the Interaction of Cement-Based Materials for 3D Printing with Fly-Ash and Superabsorbent Polymers
445. Lv Chun, Shen Hongtao, Liu Jie, Wu Dan et al. (2022-11)
     Properties of 3D Printing Fiber-Reinforced Geopolymers Based on Inter-Layer Bonding and Anisotropy
446. Mesnil Romain, Poussard Valentin, Sab Karam, Caron Jean-François (2022-11)
     On the Geometrical Origin of the Anisotropy in Extrusion-Based 3D Printed Structures
447. Ma Zongfang, Wan Weipeng, Song Lin, Liu Chao et al. (2022-11)
     An Approach of Path-Optimization Algorithm for 3D Concrete Printing Based on Graph-Theory
448. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-10)
     The Fresh and Hardened Properties of 3D Printing Cement-Base Materials with Self-Cleaning Nano-TiO2:
     An Exploratory Study
449. Khan Shoukat, Koç Muammer (2022-10)
     Numerical Modelling and Simulation for Extrusion-Based 3D Concrete Printing:
     The Underlying Physics, Potential, and Challenges
450. Patterson Albert, Vajipeyajula Bhaskar, Norris William (2022-10)
     System Architecture and Design Parameters for Extrusion-Based Autonomous Construction Systems
451. Che Yujun, Yang Huashan (2022-10)
     Hydration Products, Pore-Structure, and Compressive Strength of Extrusion-Based 3D Printed Cement-Pastes Containing Nano-Calcium-Carbonate
452. Demiral Nazim, Ozkan Ekinci Mehmet, Şahin Oğuzhan, İlcan Hüseyin et al. (2022-10)
     Mechanical Anisotropy Evaluation and Bonding Properties of 3D Printable Construction and Demolition Waste-Based Geopolymer Mortars
453. Wang Li, Lin Wenyu, Ma Hui, Li Dexin et al. (2022-09)
     Mechanical and Microstructural Properties of 3D Printed Aluminate-Cement-Based Composite Exposed to Elevated Temperatures
454. Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2022-09)
     Spray-Based 3D Concrete Printing with Calcium and Polymeric Additives:
     A Feasibility Study
455. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2022-09)
     Rheology and Printability of Portland-Cement-Based Materials:
     A Review
456. Ren Chuangnan, Gao Baobin, Geng Chenhui, Zhu Wenjie (2022-09)
     Assembled Design and Compressive Performance Simulation of Mine Waterproof Wall Based on Concrete 3D Printing
457. Medicis Carolina, Gonzalez Sergio, Alvarado Yezid, Vacca Hermes et al. (2022-09)
     Mechanical Performance of Commercially Available Premix UHPC-Based 3D Printable Concrete
458. Puzatova (nee Sharanova) Anastasiia, Sokolnikova S., Dmitrieva Maria (2022-09)
     Polymer-Cement Concrete Based on Polyvinyl-Acetate Dispersion for Construction 3D Printing
459. Cicione Antonio, Kruger Jacques, Mostert Jean-Pierre, Walls Richard et al. (2022-09)
     The Effect of Wind on 3D Printed Concrete Inter-Layer Bond Strength Based on Machine Learning Algorithms
460. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2022-09)
     Fresh Properties and Strength Evolution of Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer Composite for 3D Concrete Printing Application
461. Mir Namra, Khan Shoukat, Kul Anil, Şahin Oğuzhan et al. (2022-08)
     Life Cycle Assessment of Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
462. Lee Dongyoun, Hong Junho (2022-08)
     Development of an Adaptive Slicing Algorithm of Laminated Object Manufacturing Based 3D Printing for Freeform Formwork
463. Silva Guido, Ñañez Robert, Zavaleta Diana, Burgos Valeria et al. (2022-07)
     Eco-Friendly Additive Construction:
     Analysis of the Printability of Earthen-Based Matrices Stabilized with Potato-Starch-Gel and Sisal-Fibers
464. Barjuei Erfan, Courteille Eric, Rangeard Damien, Marie F. et al. (2022-07)
     Real-Time Vision-Based Control of Industrial Manipulators for Layer-Width Setting in Concrete 3D Printing Applications
465. Zhang Hongping, Liu Yaling, Cheng Zhi, Zhao Zhiyi (2022-07)
     Effect of Layering Molding Process on Strength of 3D Printed Composite Cement-Based Materials
466. Wan Qian, Wang Li, Ma Guowei (2022-07)
     Continuous and Adaptable Printing Path Based on Transfinite Mapping for 3D Concrete Printing
467. Liu Xiongfei, Li Qi, Wang Fang, Ma Guowei (2022-07)
     Systematic Approach for Printability Evaluation and Mechanical Property Optimization of Spray-Based 3D Printed Mortar
468. Čítek David, Rehacek Stanislav, Dobias Daniel (2022-07)
     Experimental Research on 3D Printed Construction from Cement-Based Composites
469. Anton Ana-Maria, Reiter Lex, Skevaki Eleni, Dillenburger Benjamin (2022-07)
     Reinforcement Lattices for 3DCP:
     A Fabrication Method Based on Ruled Surfaces
470. Ma Guowei, Bai Gang, Wang Li, Wang Fang (2022-07)
     Explosion-Resistance of 3D Printing Ultra-High-Performance Concrete Based on Contact-Explosion Tests
471. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2022-06)
     Printability-Assessment of Cement-Based Materials Using Uniaxial Compression-Test
472. Reißig Silvia, Nerella Venkatesh, Mechtcherine Viktor (2022-06)
     Material-Design and Rheological Behavior of Sustainable Cement-Based Materials in the Context of 3D Printing
473. Rusike Rutendo, Sataya Michael, Marsh Alastair, Cavalaro Sergio et al. (2022-06)
     Accelerating Early-Age Properties of Ultra-Low Clinker Cements for Extrusion-Based 3D Printing
474. Xiao Yinan, Khader Noor, Vandenberg Aileen, Lowke Dirk et al. (2022-06)
     Injection 3D Concrete Printing (I3DCP) Combined with Vector-Based 3D Graphic Statics
475. Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2022-06)
     Monitoring Strain Using Digital Image Correlation During Compressive and Tensile Loading:
     Assessment of Critical Strain of Cement-Based Materials Containing VMA
476. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2022-06)
     Using Limestone-Powder as a Carrier for the Accelerator in Extrusion-Based 3D Concrete Printing
477. Kruger Jacques, Mostert Jean-Pierre, Zijl Gideon (2022-06)
     A Strain-Based Constitutive Model Ensuring Aesthetic 3D Printed Concrete Structures:
     Limiting Differential Settlement of Filaments
478. Demont Léo, Charrier Malo, Margerit Pierre, Ducoulombier Nicolas et al. (2022-06)
     Flow-Based Pultrusion of Anisotropic Concrete:
     Mechanical Properties at Hardened State
479. Han Nv, Xiao Jianzhuang, Zhang Lihai, Peng Yu (2022-06)
     A Micro-Scale-Based Numerical Model for Investigating Hygro-Thermo-Mechanical Behavior of 3D Printed Concrete at Elevated Temperatures
480. Mohan Manu, Rahul Attupurathu, Tao Yaxin, Schutter Geert et al. (2022-06)
     Hydration Re-Initiation of Borated CSA Systems with a Two-Stage Mixing Process:
     An Application in Extrusion-Based Concrete 3D Printing
481. Weger Daniel, Talke Daniel, Lowke Dirk, Henke Klaudius et al. (2022-06)
     Additive Manufacturing of Free-Formed Concrete Elements by Selective Binding with Calcium Silicate-Based Cements
482. Mohammad Abdul, Biernacki Joseph (2022-06)
     2D Stationary Computational Printing of Cement-Based Pastes
483. Jiang Quan, Liu Qiang, Wu Si, Zheng Hong et al. (2022-06)
     Modification Effect of Nano-Silica and Polypropylene-Fiber for Extrusion-Based 3D Printing Concrete:
     Printability and Mechanical Anisotropy
484. Reinold Janis, Meschke Günther (2022-06)
     Algorithm for Aging Materials with Evolving Stiffness Based on a Multiplicative Split
485. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
     Assessing the Fresh Properties of Printable Cement-Based Materials:
     High-Potential Tests for Quality-Control
486. Nistler Maximilian, Kovaleva Daria, Tepper Louis, Blandini Lucio et al. (2022-05)
     Camera-Based Process Monitoring for Powder-Bed Additive Manufacturing in Construction
487. Reinold Janis, Gudžulić Vladislav, Meschke Günther (2022-05)
     Fiber-Orientation Modeling During Extrusion-Based 3D Concrete Printing
488. Geng Zifan, Pan Hao, Zuo Wenqiang, She Wei (2022-05)
     Functionally Graded Lightweight Cement-Based Composites with Outstanding Mechanical Performances via Additive Manufacturing
489. Zhang Chao, Jia Zijian, Wang Xianggang, Jia Lutao et al. (2022-05)
     A Two-Phase Design-Strategy Based on the Composite of Mortar and Coarse Aggregate for 3D Printable Concrete with Coarse Aggregate
490. Ivaniuk Egor, Eichenauer Martin, Tošić Zlata, Müller Steffen et al. (2022-05)
     3D Printing and Assembling of Frame Modules Using Printable Strain-Hardening Cement-Based Composites
491. Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Kamile, Felekoğlu Burak (2022-05)
     Effect of Fiber-Reinforcement on Extrudability and Buildability of Mineral-Additive-Modified Portland-Cement Mortars:
     A Rheometer-Based Simulation-Analysis
492. Breseghello Luca, Naboni Roberto (2022-05)
     Tool-Path -Based Design for 3D Concrete Printing of Carbon-Efficient Architectural Structures
493. Kuzmenko Kateryna, Ducoulombier Nicolas, Féraille Adélaïde, Roussel Nicolas (2022-05)
     Environmental Impact of Extrusion-Based Additive Manufacturing:
     Generic Model, Power-Measurements and Influence of Printing-Resolution
494. Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei et al. (2022-05)
     Effect of FA and GGBFS on Compressive Strength, Rheology, and Printing Properties of Cement-Based 3D Printing Material
495. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2022-04)
     3D Printing of Cement-Based Materials with Adapted Buildability
496. Tan Yuan, Dahlenburg Maximilian, Fottner Johannes, Kessler Stephan (2022-04)
     Influencing Factors of the Mixing Performance of a Near-Nozzle Continuous Mixer for 3D Concrete Printing:
     An Analysis Based on Spatial-Lacey-Mixing-Index
497. Ennab Lena, Dixit Manish, Birgisson Bjorn, Kumar Pranav (2022-04)
     Comparative Life Cycle Assessment of Large-Scale 3D Printing Utilizing Kaolinite-Based Calcium-Sulfoaluminate-Cement Concrete and Conventional Construction
498. Stieler David, Schwinn Tobias, Menges Achim (2022-04)
     Additive Formwork in Pre-Cast Construction:
     Agent-Based Methods for Fabrication-Aware Modularization of Concrete Building Elements
499. Zhou Ji, Hou Guanyu, Liu Xiongfei, Li Qi et al. (2022-04)
     Mechanical Properties of Spray-Based 3D Printed Micro-Cable-Reinforced Concrete
500. Li Weihong, Chen Xuhao, Li Nan (2022-04)
     3D Printing of Fast Setting Basalt Fiber-Reinforced Cement-Based Materials
501. Ignatova Elena, Kirichek Pavel (2022-04)
     Additive Manufacturing Based on Building Information-Model-Data
502. Fuente Albert, Blanco Ana, Galeote Eduardo, Cavalaro Sergio (2022-04)
     Structural Fiber-Reinforced Cement-Based Composite Designed for Particle-Bed 3D Printing Systems:
     Case Study Parque De Castilla Footbridge in Madrid
503. Liu Xiongfei, Li Qi, Li Jixiang (2022-04)
     Shrinkage and Mechanical Properties Optimization of Spray-Based 3D Printed Concrete by PVA-Fiber
504. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2022-04)
     A Grammar-Based Algorithm for Tool-Path-Generation:
     Compensating for Material-Deformation in the Additive Manufacturing of Concrete
505. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2022-04)
     3D Printing Devices and Reinforcing Techniques for Extruded Cement-Based Materials:
     A Review
506. Bhattacherjee Shantanu, Santhanam Manu (2022-04)
     Investigation on the Effect of Alkali-Free Aluminium Sulfate-Based Accelerator on the Fresh Properties of 3D Printable Concrete
507. Mo Yixin, Xing Jianchun, Yue Songlin, Zhang Yamei et al. (2022-04)
     Dynamic Properties of 3D Printed Cement Mortar Based on Split Hopkinson Pressure Bar Testing
508. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-03)
     Modifying Effect of Anionic Polyacrylamide Dose for Cement-Based 3DP Materials:
     Printability and Mechanical Performance Tests
509. Afarani Hajar, Moser Newell, Garboczi Edward, Esfahani Ebrahim et al. (2022-03)
     Print Fidelity Metrics for Additive Manufacturing of Cement-Based Materials
510. Pan Tinghong, Teng Huaijin, Liao Hengcheng, Jiang Yaqing et al. (2022-03)
     Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials:
     Experimental and Numerical Studies
511. Zhang Chao, Deng Zhicong, Chen Chun, Zhang Yamei et al. (2022-03)
     Predicting the Static Yield-Stress of 3D Printable Concrete Based on Flowability of Paste and Thickness of Excess-Paste-Layer
512. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Yıldırım Gürkan et al. (2022-03)
     Rheological Properties and Compressive Strength of Construction and Demolition Waste-Based Geopolymer Mortars for 3D Printing
513. Cui Hongzhi, Li Yuanhong, Cao Xiangpeng, Huang Mingyang et al. (2022-03)
     Experimental Study of 3D Concrete Printing-Configurations Based on the Buildability Evaluation
514. Yuan Qiang, Gao Chao, Huang Tingjie, Zuo Shenghao et al. (2022-03)
     Factors Influencing the Properties of Extrusion-Based 3D Printed Alkali-Activated Fly-Ash-Slag Mortar
515. Carneau Paul, Mesnil Romain, Baverel Olivier, Roussel Nicolas (2022-03)
     Layer Pressing in Concrete Extrusion-Based 3D Printing:
     Experiments and Analysis
516. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-03)
     Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials:
     Correction
517. Shao Lijing, Feng Pan, Zuo Wenqiang, Wang Haochuan et al. (2022-02)
     A Novel Method for Improving the Printability of Cement-Based Materials:
     Controlling the Releasing of Capsules Containing Chemical Admixtures
518. Harbouz Ilhame, Rozière Emmanuel, Yahia Ammar, Loukili Ahmed (2022-02)
     Printability-Assessment of Cement-Based Materials Based on Rheology, Hydration Kinetics, and Viscoelastic Properties
519. Heidarnezhad Fatemeh, Zhang Qian (2022-01)
     Shotcrete-Based 3D Concrete Printing:
     State of Art, Challenges, and Opportunities
520. M’Lahfi Basma, Amegouz Driss, Qandil Mostafa (2022-01)
     New Printable Concrete Formulation Based on Fibers from Doum Palm Leaflets for 3D Printing of Energy-Efficient Buildings
521. Tripathi Avinaya, Nair Sooraj, Neithalath Narayanan (2022-01)
     A Comprehensive Analysis of Buildability of 3D Printed Concrete and the Use of Bi-Linear Stress-Strain Criterion-Based Failure Curves Towards Their Prediction
522. Pastore Tommaso, Menna Costantino, Asprone Domenico (2022-01)
     Bézier-Based Biased Random-Key Genetic Algorithm to Address Printability-Constraints in the Topology-Optimization of Concrete Structures
523. Xie Xiangyu, Zhang Lihai, Shi Caijun, Liu Xuemei (2022-01)
     Prediction of Lubrication-Layer Properties of Pumped Concrete Based on Flow-Induced Particle-Migration
524. Roussel Nicolas, Lowke Dirk, Buswell Richard (2022-01)
     Digital Fabrication with Cement-Based Materials:
     The RILEM D.F.C. Technical Committee
525. Putten Jolien, Nerella Venkatesh, Mechtcherine Viktor, Hondt Mélody et al. (2022-01)
     Properties and Testing of Printed Cement-Based Materials in Hardened State
526. Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
     Digital Fabrication with Cement-Based Materials:
     Process Classification and Case Studies
527. Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
     Digital Fabrication with Cement-Based Materials:
     Underlying Physics
528. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
     Printable Cement-Based Materials:
     Fresh Properties Measurements and Control
529. Heever Marchant, Plessis Anton, Kruger Jacques, Zijl Gideon (2022-01)
     Evaluating the Effects of Porosity on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
530. Sun Xiaoyan, Ye Boxing, Lin Kangjian, Wang Hailong (2021-12)
     Shear-Performance of 3D Printed Concrete Reinforced with Flexible or Rigid Materials Based on Direct-Shear-Test
531. Min Kyung-Sung, Park Kwang-Min, Lee Bong-Chun, Roh Young-Sook (2021-12)
     Chloride Diffusion by Build Orientation of Cementitious Material-Based Binder-Jetting 3D Printing Mortar
532. Xiao Qiyuan, Long Guangcheng, Feng Ruiping, Zeng Xiaohui et al. (2021-12)
     Effect of Alternating Current Field on Rheology of Fresh Cement-Based-Pastes
533. Kajzr Daniel, Břoušek Josef, Petr Tomas, Beran Leoš et al. (2021-12)
     New Design of PLC-Based Robotic Control System for Concrete Printing in Building Construction
534. Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2021-12)
     Open-Span Printing Method for Assessment of Early-Age Deformations of Additively Manufactured Cement-Based Materials Using an Isosceles Triangle
535. Stidwell Samuel, Kreiger Eric (2021-12)
     Determination of Mechanical Properties of Additively Constructed Concrete Based on Specimen-Orientation
536. Xu Zhisong, Li Zhuguo, Jiang Fei (2021-11)
     Numerical Approach to Pipe Flow of Fresh Concrete Based on MPS Method
537. Jin Yuan, Zhou Xiaolong, Chen Mingxu, Zhao Zhihui et al. (2021-11)
     High-Toughness 3D Printed White Portland-Cement-Based Materials with Glass-Fiber-Textile
538. Nair Sooraj, Sant Gaurav, Neithalath Narayanan (2021-11)
     Mathematical Morphology-Based Point-Cloud-Analysis-Techniques for Geometry-Assessment of 3D Printed Concrete Elements
539. Lauff Philipp, Pugacheva Polina, Rutzen Matthias, Weiss Ursula et al. (2021-11)
     Evaluation of the Behavior of Carbon-Short-Fiber-Reinforced Concrete (CSFRC) Based on a Multi-Sensory Experimental Investigation and a Numerical Multi-Scale Approach
540. Liu Chao, Zhang Rongfei, Liu Huawei, He Chunhui et al. (2021-11)
     Analysis of the Mechanical Performance and Damage Mechanism for 3D Printed Concrete Based on Pore-Structure
541. Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
     A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing
542. Zhang Hongping, Wang Jianhong, Liu Yaling, Zhang Xiaoshuang et al. (2021-11)
     Effect of Processing Parameters on the Printing Quality of 3D Printed Composite Cement-Based Materials
543. Marczyk Joanna, Ziejewska Celina, Gądek Szymon, Korniejenko Kinga et al. (2021-11)
     Hybrid Materials Based on Fly-Ash, Metakaolin, and Cement for 3D Printing
544. Placzek Gerrit, Brohmann Leon, Mawas Karam, Schwerdtner Patrick et al. (2021-11)
     A Lean-Based Production Approach for Shotcrete 3D Printed Concrete Components
545. Gantner Stefan, Rothe Tom, Hühne Christian, Hack Norman (2021-11)
     Reinforcement-Strategies for Additive Manufacturing in Construction Based on Dynamic Fiber Winding:
     Concepts and Initial Case Studies
546. Suiker Akke (2021-11)
     Effect of Accelerated Curing and Layer Deformations on Structural Failure During Extrusion-Based 3D Printing
547. Paiva Maria, Duarte Fonseca Rocha Larissa, Fernandez Letízia, Toledo Filho Romildo et al. (2021-11)
     Rheological Properties of Metakaolin-Based Geopolymers for Three-Dimensional Printing of Structures
548. Kondepudi Kala, Subramaniam Kolluru (2021-11)
     Extrusion-Based Three-Dimensional Printing Performance of Alkali-Activated Binders
549. Frangez Valens, Lloret-Fritschi Ena, Taha Nizar, Gramazio Fabio et al. (2021-10)
     Depth-Camera-Based Rebar Detection and Digital Reconstruction for Robotic Concrete Spraying
550. Wolfs Robert, Salet Theo, Roussel Nicolas (2021-10)
     Filament-Geometry-Control in Extrusion-Based Additive Manufacturing of Concrete:
     The Good, the Bad and the Ugly
551. Dobrzanski James, Buswell Richard, Cavalaro Sergio, Kinnell Peter et al. (2021-09)
     Milling a Cement-Based 3D Printable Mortar in Its Green State Using a Ball-Nosed Cutter
552. Nassar Roz-Ud-Din, Soroushian Parviz, Balachandra Anagi, Nassar Shumayal et al. (2021-09)
     Evaluation of Refined Cement-Based Matrix Systems for Extrusion of Wood-Fiber Cement
553. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2021-09)
     Developing Mix Proportions for Class C Fly-Ash-Based Alkali-Activated 3D Printed Concrete Mixtures
554. Schryver Robin, Cheikh Khadija, Lesage Karel, Yardimci Mert et al. (2021-09)
     Numerical Reliability Study Based on Rheological Input for Bingham-Paste-Pumping Using a Finite Volume Approach in OpenFOAM
555. Wi Kwangwoo, Wang Kejin, Taylor Peter, Laflamme Simon et al. (2021-09)
     Properties and Microstructure of Extrusion-Based 3D Printing Mortar Containing a Highly Flowable, Rapid Set Grout
556. Zhang Ping, Lu Xiao-jun (2021-09)
     Study on Bending Strength of Cementitious Composites Based on Fiber-Alignment
557. Liu Chenkang, Yue Songlin, Zhou Cong, Sun Honglei et al. (2021-08)
     Anisotropic Mechanical Properties of Extrusion-Based 3D Printed Layered Concrete
558. Chen Yu, He Shan, Zhang Yu, Wan Zhi et al. (2021-08)
     3D Printing of Calcined-Clay-Limestone-Based Cementitious Materials
559. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-07)
     Mechanical Characterisation for Numerical Simulation of Extrusion-Based 3D Concrete Printing
560. Hack Norman, Bahar Mohammad, Hühne Christian, Lopez William et al. (2021-06)
     Development of a Robot-Based Multi-Directional Dynamic Fiber Winding Process for Additive Manufacturing Using Shotcrete 3D Printing
561. Chen Yidong, Zhang Yunsheng, Pang Bo, Liu Zhiyong et al. (2021-05)
     Extrusion-Based 3D Printing Concrete with Coarse Aggregate:
     Printability and Direction-Dependent Mechanical Performance
562. Schmidt Albrecht, Mengesha Meron, Göbel Luise, Könke Carsten et al. (2021-05)
     Numerical Modeling of an Extrusion-Based Concrete Printing Process Considering Spatially and Temporarily Varying Material and Process Parameters
563. Şahin Oğuzhan, İlcan Hüseyin, Ateşli Anıl, Kul Anil et al. (2021-05)
     Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
564. Ducoulombier Nicolas, Mesnil Romain, Carneau Paul, Demont Léo et al. (2021-05)
     The “Slugs-Test” for Extrusion-Based Additive Manufacturing:
     Protocol, Analysis and Practical Limits
565. Salman Nazar, Ma Guowei, Ijaz Nauman, Wang Li (2021-04)
     Importance and Potential of Cellulosic Materials and Derivatives in Extrusion-Based 3D Concrete Printing:
     Prospects and Challenges
566. Zhu Binrong, Pan Jinlong, Zhou Zhenxin, Cai Jingming (2021-04)
     Mechanical Properties of Engineered Cementitious Composites Beams Fabricated by Extrusion-Based 3D
567. Zhao Zhihui, Chen Mingxu, Xu Jiabin, Li Laibo et al. (2021-03)
     Mix-Design and Rheological Properties of Magnesium-Potassium-Phosphate Cement Composites Based on the 3D Printing-Extrusion-System
568. Teixeira João, Schaefer Cecília, Rangel Bárbara, Alves Jorge et al. (2021-03)
     Development of 3D Printing Sustainable Mortars Based on a Bibliometric Analysis
569. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
     Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
     Possibilities and Challenges
570. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2021-02)
     Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials
571. Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2021-02)
     Effect of Printing Parameters on Material-Distribution in Spray-Based 3D Concrete Printing (S-3DCP)
572. Xu Jiabin, Chen Mingxu, Zhao Zhihui, Li Laibo et al. (2021-01)
     Printability and Efflorescence-Control of Admixtures-Modified 3D Printed White Portland-Cement-Based Materials Based on the Response-Surface-Methodology
573. Wu Weiwei, Wang Zhongyu, Ding Shuang, Song Aiping (2021-01)
     Effect Research of Cement Block on Paste-Flow for 3D Cement Printing Based on an Improved Lattice-Boltzmann Method
574. Gomaa Mohamed, Jabi Wassim, Veliz-Reyes Alejandro, Soebarto Veronica (2021-01)
     3D Printing System for Earth-Based Construction:
     Case Study of Cob
575. Demont Léo, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2021-01)
     Flow-Based Pultrusion of Continuous Fibers for Cement-Based Composite Material and Additive Manufacturing:
     Rheological and Technological Requirements
576. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-01)
     Early-Age Hydration, Rheology and Pumping Characteristics of CSA Cement-Based 3D Printable Concrete
577. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-12)
     Gravity-Induced Flow to Characterize Rheological Properties of Printable Cement-Based Materials
578. Luhar Salmabanu, Suntharalingam Thadshajini, Navaratnam Satheeskumar, Luhar Ismail et al. (2020-12)
     Sustainable and Renewable Bio-Based Natural Fibers and Its Application for 3D Printed Concrete:
     A Review
579. Kruger Jacques, Plessis Anton, Zijl Gideon (2020-12)
     An Investigation into the Porosity of Extrusion-Based 3D Printed Concrete
580. Placzek Gerrit, Schwerdtner Patrick (2020-12)
     Derivation of Integration Approaches for "Concrete 3D Printing" in the Construction Process Based on Features of Additive Manufacturing
581. Vantyghem Gieljan, Ooms Ticho, Corte Wouter (2020-11)
     VoxelPrint:
     A Grasshopper Plug-In for Voxel-Based Numerical Simulation of Concrete Printing
582. Papacharalampopoulos Alexios, Bikas Harry, Foteinopoulos Panagis, Stavropoulos Panagiotis (2020-11)
     A Path-Planning-Optimization Framework for Concrete-Based Additive Manufacturing Processes
583. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
     Extrusion-Based Concrete 3D Printing from a Material Perspective:
     A State of the Art Review
584. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-10)
     Modelling of 3D Concrete Printing Based on Computational Fluid Dynamics
585. Guo Xiaolu, Yang Junyi, Xiong Guiyan (2020-09)
     Influence of Supplementary Cementitious Materials on Rheological Properties of 3D Printed Fly-Ash-Based Geopolymer
586. Mahadevan Meera, Francis Ann, Thomas Albert (2020-08)
     A Simulation-Based Investigation of Sustainability Aspects of 3D Printed Structures
587. Smarsly Kay, Peralta Patricia, Luckey Daniel, Heine Sebastian et al. (2020-08)
     BIM-Based Concrete Printing
588. Ortega Guillermo, Madrid Javier, Olsson Nils, Tenorio Ríos José (2020-08)
     The Application of 3D Printing Techniques in the Manufacturing of Cement-Based Construction Products and Experiences Based on the Assessment of Such Products
589. Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
     Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
     An Experimental and Numerical Study
590. Li Zhanzhao, Hojati Maryam, Wu Zhengyu, Piasente Jonathon et al. (2020-07)
     Fresh and Hardened Properties of Extrusion-Based 3D Printed Cementitious Materials:
     A Review
591. Beersaerts Glenn, Lucas Sandra, Pontikes Yiannis (2020-07)
     An Fe-Rich Slag-Based Mortar for 3D Printing
592. Benamara Abdeslam, Pierre Alexandre, Kaci Abdelhak, Mélinge Yannick (2020-07)
     3D Printing of a Cement-Based Mortar in a Complex Fluid Suspension:
     Analytical Modeling and Experimental Tests
593. Casagrande Lorenzo, Esposito Laura, Menna Costantino, Asprone Domenico et al. (2020-07)
     Mechanical Characterization of Cement-Based Mortar Used in 3DCP Including Early-Age Creep Effects
594. Ducoulombier Nicolas, Carneau Paul, Mesnil Romain, Demont Léo et al. (2020-07)
     The Slug-Test:
     In-Line-Assessment of Yield-Stress for Extrusion-Based Additive Manufacturing
595. Scheurer Martin, Dittel Gözdem, Gries Thomas (2020-07)
     Potential for the Integration of Continuous-Fiber-Based Reinforcements in Digital Concrete Production
596. Shakor Pshtiwan, Nejadi Shami, Gowripalan Nadarajah (2020-07)
     Effect of Heat-Curing and E6-Glass Fiber-Reinforcement Addition on Powder-Based 3DP Cement Mortar
597. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2020-07)
     Numerical Modeling of an Extrusion-Based 3D Concrete Printing-Process Considering a Spatially-Varying Pseudo-Density Approach
598. Dedenis Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud et al. (2020-07)
     Effect of Metakaolin, Fly-Ash and Polypropylene-Fibers on Fresh and Rheological Properties of 3D Printing Based Cement Materials
599. Hass Lauri, Bos Freek (2020-07)
     Bending and Pull-Out Tests on a Novel Screw Type Reinforcement for Extrusion-Based 3D Printed Concrete
600. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-07)
     Gravity-Driven Tests to Assess Mechanical Properties of Printable Cement-Based Materials at Fresh State
601. Wan Qian, Wang Li, Ma Guowei (2020-07)
     Adaptable Tool-Path-Planning Method for 3D Concrete Printing Based on the Mapping Method
602. Yuan Qiang, Zhou Dajun, Huang Hai, Peng Jianwei et al. (2020-06)
     Structural Build-Up, Hydration and Strength Development of Cement-Based Materials with Accelerators
603. Xu Jie, Buswell Richard, Kinnell Peter, Biro Istvan et al. (2020-06)
     Inspecting Manufacturing Precision of 3D Printed Concrete Parts Based on Geometric Dimensioning and Tolerancing
604. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schmeier Tobias (2020-06)
     Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete:
     Concept and Feasibility Study
605. Albar Abdulrahman, Chougan Mehdi, Kheetan Mazen, Swash Mohammad et al. (2020-04)
     Effective Extrusion-Based 3D Printing System Design for Cementitious-Based Materials
606. Ducoulombier Nicolas, Demont Léo, Chateau Camille, Bornert Michel et al. (2020-04)
     Additive Manufacturing of Anisotropic Concrete:
     A Flow-Based Pultrusion of Continuous Fibers in a Cementitious Matrix
607. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2020-04)
     A Rheology-Based Quasi-Static Shape-Retention-Model for Digitally Fabricated Concrete
608. Chen Yu, Figueiredo Stefan, Li Zhenming, Chang Ze et al. (2020-03)
     Improving Printability of Limestone-Calcined-Clay-Based Cementitious Materials by Using Viscosity-Modifying Admixture
609. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
     Extrusion-Based Additive Manufacturing with Cement-Based Materials:
     Production Steps, Processes, and Their Underlying Physics
610. Hack Norman, Mai (née Dressler) Inka, Brohmann Leon, Gantner Stefan et al. (2020-03)
     Injection 3D Concrete Printing (I3DCP):
     Basic Principles and Case Studies
611. Craveiro Flávio, Nazarian Shadi, Bártolo Helena, Bartolo Paulo et al. (2020-02)
     An Automated System for 3D Printing Functionally Graded Concrete-Based Materials
612. Lu Bing, Zhu Weiping, Weng Yiwei, Liu Zhixin et al. (2020-02)
     Study of MgO-Activated-Slag as a Cementless Material for Sustainable Spray-Based 3D Printing
613. Lakhal Othman, Chettibi Taha, Belarouci Abdelkader, Dherbomez Gerald et al. (2020-02)
     Robotized Additive Manufacturing of Funicular Architectural Geometries Based on Building Materials
614. Lao Wenxin, Li Mingyang, Wong Teck, Tan Ming et al. (2020-02)
     Improving Surface-Finish-Quality in Extrusion-Based 3D Concrete Printing Using Machine-Learning-Based Extrudate-Geometry-Control
615. Foteinopoulos Panagis, Esnault Vivien, Komineas George, Papacharalampopoulos Alexios et al. (2020-01)
     Cement-Based Additive Manufacturing:
     Experimental Investigation of Process Quality
616. Rahul Attupurathu, Sharma Abhishek, Santhanam Manu (2020-01)
     A Desorptivity-Based Approach for the Assessment of Phase Separation During Extrusion of Cementitious Materials
617. Shakor Pshtiwan, Nejadi Shami, Sutjipto Sheila, Paul Gavin et al. (2020-01)
     Effects of Deposition-Velocity in the Presence-Absence of E6-Glass-Fiber on Extrusion-Based 3D Printed Mortar
618. Nishijo Keisuke, Ohno Motohiro, Ishida Tetsuya (2019-12)
     Quantitative Evaluation of Buildability in 3D Concrete Printing Based on Shear-Vane-Test
619. Yassin Abdallah, Hamzeh Farook, Sakka Fatima (2019-12)
     Agent-Based Modeling to Optimize Workflow of Robotic Steel and Concrete 3D Printers
620. Kontovourkis Odysseas, Tryfonos George (2019-11)
     Robotic 3D Clay Printing of Prefabricated Non-Conventional Wall Components Based on a Parametric-Integrated Design
621. Korniejenko Kinga, Łach Michał, Chou S., Lin Wei-Ting et al. (2019-11)
     A Comparative Study of Mechanical Properties of Fly-Ash-Based Geopolymer Made by Casted and 3D Printing Methods
622. Celorrio-Barragué Luis, Calvo-Simón Sergio, Gaspar Marcelo, Vidal-Cortés Mariano et al. (2019-10)
     3D Printed Models-Based Lab Activities to Enhance Learning-Teaching Processes in Structural Engineering Courses
623. Shen Hongyao, Pan Lingnan, Qian Jun (2019-10)
     Research on Large-Scale Additive Manufacturing Based on Multi-Robot Collaboration Technology
624. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2019-09)
     Predication of Strength-Based Failure in Extrusion-Based 3D Concrete Printing
625. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-09)
     Enhancing Strength of Powder-Based 3D Printed Geopolymers for Digital Construction Applications
626. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-09)
     Post-Processing Techniques to Enhance Strength of Portland Cement Mortar Digitally Fabricated Using Powder-Based 3D Printing Process
627. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-09)
     Quantifying Constructability Performance of 3D Concrete Printing via Rheology-Based Analytical Models
628. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2019-09)
     Effect of Silicon-Carbide-Nano-Particles on 3D Printability of Cement-Based Materials
629. Valente Marco, Sibai Abbas, Sambucci Matteo (2019-09)
     Extrusion-Based Additive Manufacturing of Concrete Products:
     Revolutionizing and Remodeling the Construction Industry
630. Zhang Chao, Hou Zeyu, Chen Chun, Zhang Yamei et al. (2019-09)
     Design of 3D Printable Concrete Based on the Relationship Between Flowability of Cement-Paste and Optimum Aggregate-Content
631. Long Wujian, Tao Jie-Lin, Lin Can, Gu Yucun et al. (2019-08)
     Rheology and Buildability of Sustainable Cement-Based Composites Containing Micro-Crystalline Cellulose for 3D Printing
632. Roussel Nicolas, Bessaies-Bey Hela, Kawashima Shiho, Marchon Delphine et al. (2019-08)
     Recent Advances on Yield-Stress and Elasticity of Fresh Cement-Based Materials
633. Vantyghem Gieljan, Corte Wouter, Steeman Marijke, Boel Veerle (2019-07)
     Density-Based Topology-Optimization for 3D Printable Building Structures
634. Foteinopoulos Panagis, Papacharalampopoulos Alexios, Stavropoulos Panagiotis (2019-06)
     Block-Based Analytical Hierarchy Process Applied for the Evaluation of Construction Sector Additive Manufacturing
635. Keita Emmanuel, Bessaies-Bey Hela, Zuo Wenqiang, Belin Patrick et al. (2019-06)
     Weak Bond Strength Between Successive Layers in Extrusion-Based Additive Manufacturing:
     Measurement and Physical Origin
636. Hirayama Yuta, Zhang Jiali, Kawahara Yoshihiro (2019-06)
     A Method to Evaluate the Formability and Fluidity of Concrete-Based Materials for 3D Printing
637. Wolfs Robert, Suiker Akke (2019-06)
     Structural Failure During Extrusion-Based 3D Printing Processes
638. Chen Yu, Li Zhenming, Figueiredo Stefan, Çopuroğlu Oğuzhan et al. (2019-04)
     Limestone and Calcined-Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing:
     A Fundamental Study of Extrudability and Early-Age Strength Development
639. Chen Yu, Figueiredo Stefan, Yalçınkaya Çağlar, Çopuroğlu Oğuzhan et al. (2019-04)
     The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined-Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
640. Mazhoud Brahim, Perrot Arnaud, Picandet Vincent, Rangeard Damien et al. (2019-04)
     Underwater 3D Printing of Cement-Based Mortar
641. Lafhaj Zoubeir, Dakhli Zakaria (2019-04)
     Performance Indicators of Printed Construction Materials:
     A Durability-Based Approach
642. Furet Benoît, Poullain Philippe, Garnier Sébastien (2019-04)
     3D Printing for Construction Based on a Complex Wall of Polymer-Foam and Concrete
643. Lu Bing, Qian Ye, Li Mingyang, Weng Yiwei et al. (2019-04)
     Designing Spray-Based 3D Printable Cementitious Materials with Fly-Ash-Cenosphere and Air-Entraining Agent
644. Zahabizadeh Behzad, Cunha Vítor, Pereira João, Gonçalves Claúdia (2019-03)
     Development of Cement-Based Mortars for 3D Printing Through Wet Extrusion
645. Zahabizadeh Behzad, Cunha Vítor, Pereira João, Gonçalves Claúdia (2019-03)
     The Effect of Loading-Direction on the Compressive Behavior of a 3D Printed Cement-Based Material
646. Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2019-02)
     Performance-Based Testing of Portland Cement Concrete for Construction-Scale 3D Printing
647. Nematollahi Behzad, Xia Ming, Vijay Praful, Sanjayan Jay (2019-02)
     Properties of Extrusion-Based 3D Printable Geopolymers for Digital Construction Applications
648. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
     Properties of Powder-Based 3D Printed Geopolymers
649. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
     Development of Powder-Based 3D Concrete Printing Using Geopolymers
650. Panda Biranchi, Bhagath Singh Gangapatnam, Unluer Cise, Tan Ming (2019-02)
     Synthesis and Characterization of One-Part Geopolymers for Extrusion-Based 3D Concrete Printing
651. Kaufhold Julia, Kohl Johannes, Nerella Venkatesh, Schröfl Christof et al. (2019-02)
     Wood-Based Support Material for Extrusion-Based Digital Construction
652. Perrot Arnaud, Rangeard Damien, Nerella Venkatesh, Mechtcherine Viktor (2019-02)
     Extrusion of Cement-Based Materials:
     An Overview
653. Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
     Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing
654. Alghamdi Hussam, Nair Sooraj, Neithalath Narayanan (2019-02)
     Insights into Material-Design, Extrusion Rheology, and Properties of 3D Printable Alkali-Activated Fly-Ash-Based Binders
655. Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
     Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing
656. Nerella Venkatesh, Beigh Mirza, Fataei Shirin, Mechtcherine Viktor (2018-11)
     Strain-Based Approach for Measuring Structural Build-Up of Cement-Pastes in the Context of Digital Construction
657. Panda Biranchi, Unluer Cise, Tan Ming (2018-10)
     Investigation of the Rheology and Strength of Geopolymer Mixtures for Extrusion-Based 3D Printing
658. Ma Guowei, Li Zhijian, Wang Li, Bai Gang (2018-10)
     Micro-Cable-Reinforced Geopolymer Composite for Extrusion-Based 3D Printing
659. Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2018-09)
     A Framework for Performance-Based Testing of Fresh Mixtures for Construction-Scale 3D Printing
660. Moini Mohamadreza, Olek Jan, Magee Bryan, Zavattieri Pablo et al. (2018-09)
     Additive Manufacturing and Characterization of Architectured Cement-Based Materials via X-Ray Micro-Computed Tomography
661. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2018-09)
     Compressive Strength and Dimensional Accuracy of Portland Cement Mortar Made Using Powder-Based 3D Printing for Construction Applications
662. Chen Yu, Veer Frederic, Çopuroğlu Oğuzhan, Schlangen Erik (2018-09)
     Feasibility of Using Low CO2 Concrete Alternatives in Extrusion-Based 3D Concrete Printing
663. Vantyghem Gieljan, Boel Veerle, Corte Wouter, Steeman Marijke (2018-09)
     Compliance, Stress-Based and Multi-Physics Topology-Optimization for 3D Printed Concrete Structures
664. Moini Mohamadreza, Olek Jan, Youngblood Jeffrey, Magee Bryan et al. (2018-08)
     Additive Manufacturing and Performance of Architectured Cement-Based Materials
665. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
     Effect of Spray-Based Printing Parameters on Cementitious Material-Distribution
666. Liu Jingkuang, Li Guokai (2018-08)
     Research on the Development of 3D Printing Construction Industry Based on Diamond-Model
667. Hu Chang’an, Du Wenbo (2018-08)
     Research on the Method for Improving Mechanical Properties of Sand-Mold-Based on 3D Printing Process
668. Ogura Hiroki, Nerella Venkatesh, Mechtcherine Viktor (2018-08)
     Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D Printing
669. Secrieru Egor, Khodor Jad, Schröfl Christof, Mechtcherine Viktor (2018-05)
     Formation of Lubricating Layer and Flow Type During Pumping of Cement-Based Materials
670. Lu Bing, Li Mingyang, Qian Shunzhi, Leong Kah et al. (2018-05)
     Develop Cementitious Materials Incoporating Fly-Ash-Cenophere for Spray-Based 3D Printing
671. Panda Biranchi, Mohamed Nisar, Tan Ming (2018-04)
     Effect of 3D Printing on Mechanical Properties of Fly Ash-Based Inorganic Geopolymer
672. Perrot Arnaud, Rangeard Damien, Courteille Eric (2018-04)
     3D Printing of Earth-Based Materials:
     Processing Aspects
673. Tian Wei, Han Nv (2018-04)
     Pore Characteristics (>0.1mm) Of Non-Air-Entrained Concrete Destroyed by Freeze-Thaw-Cycles Based on CT Scanning and 3D Printing
674. Panda Biranchi, Tan Ming (2018-03)
     Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing
675. Lafhaj Zoubeir, Rabenantoandro Andry, Krimi Imane, Dakhli Zakaria et al. (2018-03)
     3D Printing in Construction:
     Application-Framework for a Robotic-Arm Based on the Extrusion-Technique
676. Dubois Vincent, Leblanc Alexandre, Carpentier Olivier, Alhaik Ghaith et al. (2018-01)
     Performances of Flax Shive-Based Lightweight Composites with Rapid Hardening
677. Ma Guowei, Li Zhijian, Wang Li (2017-12)
     Printable Properties of Cementitious Material Containing Copper-Tailings for Extrusion-Based 3D Printing
678. Villacis N., Gualavisi M., Narváez-Muñoz Christian, Carrión L. et al. (2017-11)
     Additive Manufacturing of a Rheological Characterized Cement-Based Composite Material
679. Duballet Romain, Baverel Olivier, Dirrenberger Justin (2017-09)
     Design of Space-Truss-Based Insulating Walls for Robotic Fabrication in Concrete
680. Marchment Taylor, Xia Ming, Dodd Elise, Sanjayan Jay et al. (2017-07)
     Effect of Delay-Time on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
681. Shakor Pshtiwan, Sanjayan Jay, Nazari Ali, Nejadi Shami (2017-02)
     Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing
682. Zhou Xiangming, Li Zongjin (2015-08)
     Manufacturing Cement-Based Materials and Building Products via Extrusion:
     From Laboratory to Factory
683. Beigh Mirza, Nerella Venkatesh, Schröfl Christof, Mechtcherine Viktor (2015-06)
     Studying the Rheological Behavior of Limestone-Calcined-Clay-Cement (LC3) Mixtures in the Context of Extrusion-Based 3D Printing
684. Duro-Royo Jorge, Mogas-Soldevila Laia, Oxman Neri (2015-06)
     Flow-Based Fabrication:
     An Integrated Computational Workflow for Design and Digital Additive Manufacturing of Multifunctional Heterogeneously Structured Objects
685. Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
     Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques
686. Ding Lieyun, Wei Ran, Che Haichao (2014-12)
     Development of a BIM-Based Automated Construction System
687. Perrot Arnaud, Mélinge Yannick, Estellé Patrice, Lanos Christophe (2009-04)
     Vibro-Extrusion:
     A New Forming Process for Cement-Based Materials
688. Khoshnevis Behrokh, Bodiford Melanie, Burks Kevin, Ethridge Ed et al. (2005-01)
     Lunar Contour Crafting:
     A Novel Technique for ISRU-Based Habitat Development