Skip to content

Ren Qiang

Information

ORCID
0000-0002-1830-6353
First Contribution
2020-10-10
Last Contribution
2025-10-29
Number Contributions
10
Number Citations
134

Top Co-Authors

  1. Zhang Yi (8)
  2. de Schutter Geert (7)
  3. van Tittelboom Kim (7)
  4. Jiang Zhengwu (6)
  5. Tao Yaxin (5)

Top Cited Articles

  1. Zhang Yi, Jiang Zhengwu, Zhu Yanmei, Zhang Jie et al. (2020-10)
    Effects of Redispersible Polymer-Powders on the Structural Build-Up of 3D Printing Cement Paste with and without Hydroxypropyl-Methylcellulose (39)

Persons This Author Cites the Most

  1. de Schutter Geert (48)
  2. van Tittelboom Kim (43)
  3. Mechtcherine Viktor (28)
  4. Rahul Attupurathu (22)
  5. Sanjayan Jay (22)

Persons This Author Is Cited Most By

  1. Tao Yaxin (27)
  2. de Schutter Geert (21)
  3. van Tittelboom Kim (19)
  4. Zhang Yi (17)
  5. Yuan Yong (8)

  1. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
    Durability Assessment of 3D Printed Cement-Based Materials:
    A RILEM TC 304-ADC Interlaboratory Study
  2. Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
    Layer Interface in 3D Printed Cement-Based Materials:
    Heterogeneous Phase Distribution and New Insights into Formation Mechanism
  3. Tao Yaxin, Zhang Yi, Mohan Manu, Dai Xiaodi et al. (2025-05)
    Waste-Derived Aggregates in 3D Printable Concrete:
    Current Insights and Future Perspectives
  4. Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
    Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
  5. Zhang Yi, Ren Qiang, Dai Xiaodi, Tao Yaxin et al. (2024-03)
    A Potential Active Rheology-Control Approach for 3D Printable Cement-Based Materials:
    Coupling of Temperature and Viscosity-Modifiers
  6. Zhang Yi, Zhu Yanmei, Ren Qiang, He Bei et al. (2023-08)
    Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials
  7. Tao Yaxin, Ren Qiang, Vantyghem Gieljan, Lesage Karel et al. (2023-02)
    Extending 3D Concrete Printing to Hard Rock Tunnel Linings:
    Adhesion of Fresh Cementitious Materials for Different Surface Inclinations
  8. Tao Yaxin, Ren Qiang, Lesage Karel, Tittelboom Kim et al. (2022-07)
    Shape Stability of 3D Printable Concrete with River and Manufactured Sand Characterized by Squeeze Flow
  9. Jiang Zhengwu, Yang Qian, Zhu Yanmei, Zhang Yi et al. (2022-03)
    Evaluating the Stiffening Effect of CSA and Sodium Carbonate on the Printability of OPC Mortar
  10. Zhang Yi, Jiang Zhengwu, Zhu Yanmei, Zhang Jie et al. (2020-10)
    Effects of Redispersible Polymer-Powders on the Structural Build-Up of 3D Printing Cement Paste with and without Hydroxypropyl-Methylcellulose