#concrete¶

Keywords by Co - Occurrence¶

#print (2170) #reinforcement (376) #property (319) #structure (316) #performance (310)

1. Kiriparan Balrajh, Sanjayan Jay, Rajeev Pathmanathan (2026-04)
   Establishing Standards for 3D Concrete Printing:
   Current Insights and Future Research Needs
2. Tripathi Avinaya, Nair Sooraj, Rajan Subramaniam, Sant Gaurav et al. (2026-04)
   Deformation-Based Buildability Assessment of 3D Printed Concrete and Its Numerical Simulation
3. Chen Zhengyuan, Yang Shutong, Lan Tian, Yang Tiange (2026-04)
   Evaluation of Interfacial Fracture Resistance and Fracture Anisotropy in 3D-Printed Ultra-High-Performance Concrete:
   Analytical Modelling and Experimental Investigation
4. Topolář Libor, Pazdera Luboš, Dvořák Karel, Černý Felix et al. (2026-04)
   Acoustic Emission Analysis of Tensile Failure in Layered 3D-Printed Fibre-Reinforced Fine-Grained Concrete
5. Lv Liping, He Jing, Chen Jiazhe, Xu Dan et al. (2026-04)
   Integrated Multi-Objective Optimization for Multi-Head Collaborative 3D Concrete Printing via a Trinary-Tree Enhanced Genetic Algorithm
6. Nan Bo, Qiao Youxin, Leng Junjie, Deng Zhengxing et al. (2026-04)
   Structural Performance of 3D Printed Concrete Reinforced with Bidirectional Steel Wire Mesh
7. Saravanan Pradeep, Ramaswamy Ananth (2026-04)
   A Continuum Damage–Cohesive Zone Modeling Framework for Filament and Interlayer Fracture in 3D-Printed Concrete
8. Jamhiri Babak, Buswell Richard, Blanco Ana (2026-04)
   How Homogenous Is Your 3D Printed Concrete?:
   A New Approach to Assessing Anisotropy Using Weibull Statistics
9. Modi Chaman, Kumar Manish, Chopperla Krishna (2026-04)
   In-Process Reinforcement Method for 3D-Printed Concrete Layers
10. Janghorban Emad, Joshi Arpan, Gaspar Florindo (2026-04)
    Evaluating the Effect of Glass and Carbon Fiber Mesh on 3D-Printed Concrete Performance
11. Wang Huai, Li Xiulin, Gong Hao, Wang Peijun et al. (2026-04)
    Thermal and Mechanical Properties of 3D Printed Lightweight Hollow Glass Microsphere Aggregate Concrete
12. Mütevelli Özkan İffet, Aldemir Alper (2026-04)
    Environmental, Structural, and Economic Investigation of 3D-Printed Concrete Buildings with Varying Cross-Sectional Geometries
13. Hussein Abdel, Alshamsi Ali, Mooney Harrison, Mamas Kaliope et al. (2026-04)
    Community-Driven Design of Flood-Resilient Recovery Housing via 3D Concrete Printing
14. Chougule Pranav, Abraham David, Farnam Yaghoob, Ebrahimkhanlou Arvin (2026-04)
    Laser-Based Monitoring of Robotic Carbon Dioxide Injection in Fresh Additively Manufactured Concrete
15. Luo Jintao, Zhang Li, Guan Xuemao, Yao Tianshuai et al. (2026-04)
    Recycling Molybdenum Tailings to Produce Eco-Friendly 3D-Printed Concrete:
    Rheological Properties, Mechanical Evolution and Internal Curing Mechanism
16. Taj Khalilullah, Reid Laraimie, Su Yen-Fang (2026-04)
    Environmental Influence on the Smart Self-Sensing 3D-Printed Concrete Column
17. Yang Xia, Wang Jiuyuan, Zhang Zhenming, Tan Yushuang et al. (2026-04)
    A Comparative Analysis of 3D-Printed Concrete Incorporating Fibers and Fiber Grids:
    Mechanical Properties and Microstructure
18. Guo Hongyuan, Chen Baixi, Lyu Mengze, Bao Xiaohua et al. (2026-04)
    Probabilistic and Global Sensitivity Analysis for 3D Concrete Printing:
    A Point-Evolution and Fréchet-Derivative Framework
19. Kumar Sandeep, Dixit Anjaneya (2026-04)
    3D-Printable Concrete Using Stabilized Soil:
    Effect of Binders and Curing Regimes on the Engineering Performance
20. Rizzieri Giacomo, Bos Derk, Wolfs Robert, Ferrara Liberato et al. (2026-04)
    A Unified Fluid-Solid Elasto-Viscoplastic Finite Element Model for the Simulation of 3D Concrete Printing Across Process Scales
21. Nayak Anitha, Nayaka Ramesh, Zhang Y. (2026-04)
    Performance Evaluation, Microstructure Behaviour and Life Cycle Assessment of 3D Concrete Printable Ink Containing Recycled Construction Waste
22. Lyu Qifeng, Luo Zhenhua, Sun Yuting, Du Qianyi et al. (2026-04)
    Improved Energy Storage of Dual-Concrete Composite Cavity-Structure Supercapacitor Fabricated via Mortar-Extrusion 3D Printing
23. Xia Yuhang, Cao Dongwei (2026-04)
    Optimization of Mix Proportion and Performance Study of 3D-Printed Concrete for Slope Protection
24. Öztürk Ece, Borgianni Yuri, Ince Ceren (2026-04)
    A Database-Driven Study on Durability and Sustainability of 3D Concrete Printing Mixtures
25. Ramakrishnan Sayanthan, Ramesh Akilesh, Pasupathy Kirubajiny, Mechtcherine Viktor et al. (2026-04)
    Enhancing the Printability and Sustainability of 3D Concrete Printing Using Recycled Waste Glass as a Cement Substitute
26. Duan Yuhang, Liew Jia, Rabczuk Timon, Liew Kim (2026-04)
    Frictional Contact Modeling Within a Local Strain-Based Peridynamic Framework for Impact-Induced Failure of 3D-Printed Concrete
27. Bradford Katy, Gentry Russell, Kurtis Kimberly (2026-04)
    Embodied Carbon and Energy of Offsite 3D-Printed Concrete Walls
28. Cadenazzi Thomas, Liu Kaimiao, Keles Busra (2026-04)
    Performance Evaluation of Novel 3D Printed Hemp-PLA Composites for Sustainable Concrete Reinforcement
29. Wang Guosheng, Zhang Ziyi, Tao Junwei, Tian Gang et al. (2026-04)
    Anisotropic Fracture Behavior of PAN Fiber Reinforced 3D Printed Concrete:
    Crack Evolution and Fiber Orientation Toughening Mechanism
30. Baghdadi Abtin, Kloft Harald (2026-04)
    Influence of Concrete Printing Techniques and Geometry on Shear-Compressive Capacity of Dry Concrete Joints
31. Mbabazi Justin, Wang Yalun, Luo Zhenhua, Gao Lanqi et al. (2026-04)
    Structural and Functional Performance of 3D-Printed Light-Transmitting Foamed Concrete with Different Cavity Geometries and Fiber Orientations
32. Azarhomayun Fazel, Alipanahi Pouya, Zeng Hang, Kim Heejeong et al. (2026-04)
    Experimental and Numerical Investigation of Plastic Shrinkage Control in 3D-Printed Concrete Using Natural Zeolite
33. Mostafavi Sina, Motejano-Hernandez Edgar, Bagheri Bahar, Etemadi Ali et al. (2026-04)
    Robotic Concrete 3D Printing Continuous Toolpath Planning:
    From Single Curve to Voxel-Based Systems for Design-to-Production of Urban Furnitures
34. Singh S., Aggarwal Anchal (2026-04)
    3D Concrete Printing and Its Role in Modern Construction:
    Concept to Reality
35. Warsi Syed, Panda Biranchi, Biswas Pankaj (2026-04)
    3D Finite Element Analysis on the Effects of Boundary Elements Confinement on Cyclic Performance of 3D Printed Concrete Wall
36. Li Haodao, Khayat Kamal (2026-04)
    Extrusion-Based 3D Printing of Fiber-Reinforced Concrete
37. Bos Derk, Deetman Arjen, Wolfs Robert (2026-04)
    Correlating in-Line Sensor Data to Hardened State Material Properties in Digital Fabrication with Concrete
38. Manivannan T., Reddy K., Jaganathan Jayaprakash (2026-04)
    Numerical Analysis of Flexural Behaviour in 3D-Printed Snap-Fit Interlocking Concrete Specimens Incorporating Frictional Interactions
39. Sun Hou-Qi, Zhou Jie-Kai, Xia Jun-Run, Zheng Jun-Jie et al. (2026-03)
    Interface Bonding Enhancement for FRP Grid Reinforced 3D-Printed Concrete Structures
40. Zhu Tao, Wu Yuching, Zhi Peng, Zhu Peng et al. (2026-03)
    Non-Ordinary State-Based Peridynamics Simulation for Crack Propagation of 3D-Printed Fiber-Reinforced Concrete Beam Under Bending
41. Zhen Houru, Wang Zhendi, Wang Ling, Zeng Qiang et al. (2026-03)
    Interfacial Property and Microstructure Improvement of 3D Printed Concrete via Micro-Region Vibration
42. Jiang Youbau, Li Shuaifeng, Xia Jiahui, Yang Fan et al. (2026-03)
    Experimental Studies on Impact Resistance of 3D Printed Concrete Spherical Structure with Carbon Fiber Reinforced PLA Honeycomb Energy Absorber
43. Xu Wenbin, Xu Zihao, Liu Tao, Ouyang Jun et al. (2026-03)
    A Prediction Model of Interlayer Bond Strength for 3D-Printed Concrete Considering Printing Interval and Environmental Effects
44. Wu Yiwen, Liu Chao, Liu Huawei, Pan Zhihong et al. (2026-03)
    Multiscale Mechanistic Insights into the Dual Effect of Interlayer Reinforcement on the Shear Behavior of 3D-Printed Concrete Composite Walls
45. Maurya Shubham, Panda Biranchi, Dixit Uday (2026-03)
    Experimental Study on Void Reduction and Bonding Behavior in 3D Concrete Printing with a Trowel-Integrated Nozzle
46. Wang Qian, Wang Li, Ma Guowei (2026-03)
    Advancing Sustainable Structures Through 3D Printed Concrete:
    Reinforcement Methods and Structural Design Philosophy
47. Wang Qingwei, Pan Jinlong, Han Song, Zhu Binrong et al. (2026-03)
    Effects of Nozzle Height on the Layer Deposition Process and Forming Performance of 3D Printing Concrete:
    Evidence from Experiments and CFD Simulations
48. Lu Pengyuan, Yang Yekai, Zhao Qingxin, Liu Zhongxian et al. (2026-03)
    Low-Carbon 3D-Printed Geopolymer Ultra-High-Strength Concrete Enabled by Soda Residue:
    Sustainable Development and Environmental Impact Assessment
49. Silva Guido, Tudela Marcell, Rojas Omar, Llontop Camila et al. (2026-03)
    Printable Concrete with Multi-Source Recycled Aggregates:
    Particle Packing Design, Rheological Behavior, and 3D Printing Validation
50. Punurai Wonsiri, Liu Yiliu (2026-03)
    Integrating Machine Learning with 3D Printing Concrete for Marine Structures:
    Mix Design, Strength Assessment, and Carbon Footprint Prediction
51. Luo Zhenhua, Sun Yuting, Mbabazi Justin, Du Qianyu et al. (2026-03)
    3D-Printed Concrete Structural Supercapacitor with PVA-KOH Enhanced Polymer Mortar Electrolyte
52. Xia Kailun, Chen Yuning, Yu Qian, Zhang Yamei (2026-03)
    Plastic Deformation Induced Non-Uniform Global Distribution of Microstructure and Related Performances Within 3D Printed Concrete
53. Zhang Haiyan, Gan Zhenxian, Chen Feihao, Chen Baixi (2026-03)
    Printability and Mechanical Performance of 3D Printable Geopolymer Concrete with Barium Chloride, Tartaric Acid, Sucrose, and Sodium Tripolyphosphate
54. Tripathi Avinaya, Patel Devansh, Mobasher Barzin, Neithalath Narayanan (2026-03)
    Modeling of Layered, Multi-Material 3D-Printed Concrete Flexural Members:
    Towards Efficient Structural Design and Optimization
55. Lal Dhirajkumar, Rangari Vinay, Khare Karan (2026-03)
    Structural Optimization and Cost-Efficient Development of an Indigenous Gantry-Type 3D Concrete Printing System for Scalable Construction Applications
56. Kumar S., Kumar L., Muthu Nelson, Panda Biranchi (2026-03)
    Toward Efficient Simulation of Cracked 3D-Printed Concrete Beams:
    Analytical and Homogenized Finite Element Approach
57. Luo Jianfen, Wang Qidong, Wang Lijia, Fang Mingyue (2026-03)
    A Review of the Rheological Properties of 3D-Printed Concrete:
    Raw Materials, Printing Parameters, and Evolution Mechanisms
58. Warsi Syed, Panda Biranchi, Biswas Pankaj, Chandra Borsaikia Arun (2026-03)
    Design of Earthquake-Resistant 3D Printed Concrete Walls:
    An Integrated Experimental-Numerical Framework for Predicting Cyclic Performance of Full-Scale Structural Building Based on Wall Testing
59. Sun Yuhang, Liu Xiongfei, Zhang Yalei, Ma Guowei (2026-03)
    Spray-Based 3D Printed Tunnel Lining Concrete:
    Optimization of Full-Angle Printing Path
60. Jiang Youbau, Zhang Zupan, Wen Jun, Gao Pengxiang et al. (2026-03)
    Toothed Nozzle Optimization for Enhancement of Interlayer Tensile Strength of 3D-Printed Concrete with CTGAN and XGBoost Model
61. Shazad Qamar, Abdelmongy Mohamed, Akbar Muhammad, Yosri Ahmed (2026-03)
    Experimental Study on the Role of Defect-Driven Interfaces and Porosity in Governing the Mechanical Behavior of 3D-Printed Concrete
62. Sitong Wang, Wu Chengde (2026-03)
    Biochar-Infused 3D Concrete Printing for Carbon Sequestration
63. Qi Pengfei, Zhao Wenhao, Yang Bo, Wang Ziyuan et al. (2026-03)
    GRA-RSM Based Optimization Model for the Mechanical Performance of 3D Printed Basalt Fiber Concrete
64. Omarov Bekarys, Ali Md., Memon Shazim (2026-03)
    A Novel Method to Enhance Interlayer Bond in 3D-Printed Concrete Using Dry-Powder Application of Supplementary Cementitious Materials
65. Bai Songlin, Yao Xiaofei, Yang Min, Liu Shilong et al. (2026-03)
    Design and Construction of Spatial Curved Structures Based on Concrete Additive Manufacturing:
    A Case Study of an Irregular Gatehouse
66. Campello Eduardo, Avancini Victor, Quintana-Ruiz Osvaldo (2026-03)
    A DEM-Based Simulation Framework for 3D Concrete Printing with the Discrete Fresh Concrete Model
67. Šerelis Evaldas, Vaitkevičius Vitoldas, Korat Bensa Lidija, Serjun Vesna et al. (2026-03)
    Effect of Chemical and Physico-Chemical Activation on the Properties of 3D Printed Concrete with a Low-Cement Multicomponent Binder
68. Zuo Zibo, Huang Yulin, Li Jin, Corte Wouter (2026-03)
    Monitoring Prioritization for On-Site 3D Concrete Printing Based on the Analytic Hierarchy Process
69. Joda Akram, Mansouri Abraham, Abdullahi Ahmed, Elgaali Elgaali et al. (2026-03)
    Parametric Analysis of Infill Geometry and Density for Thermally Efficient 3D-Printed Concrete
70. Liu Yalin, Fan Weichen, Li Chengze, Wei Ya et al. (2026-03)
    Printability, Mechanical, and Shrinkage Properties of 3D Printing Internally-Cured Ultra-High Performance Concrete
71. Žižková Nikol, Válek Josef, Vespalec Arnošt, Melichar Jindřich et al. (2026-03)
    Layer Bond Strength in 3D-Printed Concrete:
    The Role of Interlayer Surface Area and Printing Delay Time
72. Cheng Shengbo, Grimm Benedikt, Unterreiner Michael, Hechtl Christian et al. (2026-03)
    Properties of the Transition Region in 3D Printed Functionally Graded Concrete Through Near Nozzle Binder-Aggregate Mixing
73. Zhao Qiliang, Huang Yuxiang, Wang Bowen, Zhang Qiuchi et al. (2026-03)
    An Integrated Deep Learning Framework for CT-Based Mesoscopic Segmentation and Quantitative Analysis of 3D-Printed Concrete
74. Hinge Pawan, Bhagat Rajesh, Nandurkar Bhupesh, Pande Prashant et al. (2026-03)
    Sustainable 3D-Printed Concrete:
    Integrating E-Waste Plastics for Enhanced Printability, Mechanical Strength, and Long-Term Durability Sets
75. Chen Chi, Wang Shenglin, Li Xiaoyuan, Yang Dengwei (2026-03)
    Recent Progress and Methodology for the Characterization of Layer-Effects of Extrusion-Based 3D-Printed Concrete
76. Roske Dieter (2026-03)
    A Novel Approach to Additive Manufacturing:
    The Vibration-Modulated 3D Concrete Print Head
77. Hassan Amer, Sabri Sabri, Alomayri Thamer, Sun Li et al. (2026-03)
    Critical Review of Self-Healing Mechanisms in 3D-Printed Concrete:
    Feasibility, Challenges, and Pathways Toward Durable Automated Construction
78. Timm Kim, Villiers Wibke, Zijl Gideon (2026-03)
    3D Concrete Printing in the Waste Hierachy:
    Reduce, Reuse and Recycle
79. Zhu Chao, Li Hairuo, Liu Chao, Zhao Nan et al. (2026-03)
    Freeze-Thaw Resistance of 3D Printed Concrete:
    Comprehensive Evaluation of Material Properties and Printing Parameters
80. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2026-03)
    Anisotropy of 3D Printed Concrete Strength and Elasticity for a Well-Developed One-Component and Two-Component Concrete Mixture
81. Chai Hua, Bernhard Mathias, Zhi Yefan, Ororbia Maximilian et al. (2026-03)
    Design-to-Fabrication Workflow for 3D Concrete Printed Structures with Embedded Periodic Anticlastic Surfaces
82. Kim J.-S., Yoo C., Yang Y. (2026-03)
    Microstructural Characterization and Bonding Performance Evaluation of 3D-Printed Concrete-Mortar Composites
83. Hammad Y., Tittelboom Kim, Wan-Wendner Roman, Vorel J. (2026-03)
    Multiphysics Simulation of Time-Dependent Early-Age Behaviourin 3D Printed Concrete
84. Rehman Saif, Robens-Radermacher Annika, Unger Jörg, Wolfs Robert (2026-03)
    Assessing Structural Failure in Extrusion-Based 3D Concrete Printing Using a Plasticity Model with Non-Linear Hardening
85. Saeedi Ahmed, Collery David, O'Flaherty Tomas (2026-03)
    The Impact of Coarse Aggregates on the Performance of 3D-Printed Concrete:
    A Comprehensive Review
86. Chen Baixi, Wang Xianlin, Zhou Haijun, Jiang Sheng et al. (2026-03)
    Uncertainty Propagation in Reinforcement Bond Performance of 3D-Printed Concrete via Generative-Augmented Ensemble Learning
87. Alzoubi Y., Muciaccia Giovanni, Ferrara Liberato, Cibelli Antonio et al. (2026-03)
    Numerical Modelling of Interlayer Adhesion in 3D-Printed Concrete with LDPM
88. Jia Ru, Huang Xin, Yang Haoran, Yao Weijing et al. (2026-03)
    Based on X-CT and DEM Simulation:
    A Study on Performance Anisotropy and Mechanisms of 3D Printed Concrete
89. Wu Jie, Huang Bo-Tao, Zhong Zhen, Sanjayan Jay et al. (2026-03)
    Fracture Mechanisms of 3D-Printed Ultra-High-Performance Concrete:
    Pore-Fibre-Interface Synergy
90. Li Haiyan, Luo Aizhong, Zhang Xiaozhong, Ma XiaoMeng et al. (2026-03)
    Optimization of One-Part Alkali-Activated Concrete for Extrusion-Based 3D Printing Through Integrated Performance Evaluation
91. Sun Hou-Qi, Xie Shan-Shan, Zeng Jun-Jie, Zhuge Yan (2026-03)
    3D-Printed Concrete with In-Process Embedded Fiber-Reinforced Polymer Grid Reinforcement
92. Lunsford Caleb, Spencer Lawson, Shen Dongye, Genedy Moneeb et al. (2026-03)
    Effect of Toolpath Strategies on Anisotropy and Structural Performance of 3D Printed Concrete Gyroid Walls
93. Chen H., Sharma S., Delavar Mohammad, Sideris Petros (2026-03)
    Quantification of Seismic Performance Parameters for Single-Story 3D Printed Concrete Buildings Based on Collapse Criteria
94. Cheng Hanbin, Duarte José, Memari Ali, Bilén Sven et al. (2026-02)
    Recycled Cork Aggregate for 3D Concrete Printing:
    Rheology, Pore-Driven Anisotropy Mitigation, and Low-Carbon Thermal Buffering
95. Yu Qian, Zhu Binrong, Liu Xun, Chen Wei et al. (2026-02)
    Pore Morphology and Orientation-Induced Mechanical Orthotropic Behavior of 3D-Printed Concrete Filament
96. Liu Jiaxu, Zhang Nan, Xie Xiangyu, Sanjayan Jay et al. (2026-02)
    Orientation and Spatial Distribution of Pores and Fibers in Concrete Elements Produced by Extrusion-Based 3D Printing
97. Marchuk Vitaliy, Makarenko Ruslan, Dvorkin Leonid, Ribakov Yuri (2026-02)
    Modifying the Properties of Construction Mixtures Containing Crushed Concrete Waste for 3D Printing
98. Das Souvik, Lee Jonathan, Wei Jianqiang (2026-02)
    Tailoring Ultra-High Performance Concrete for Additive Manufacturing:
    Synergistic Roles of Superplasticizer and Viscosity-Modifying Admixture in Printability and Performance
99. Tripathi Avinaya, Maurya Ashutosh, Rajan Subramaniam, Neithalath Narayanan (2026-02)
    Finite-Element Modeling Framework for Mechanical Response of 3D-Printed Concrete:
    Elucidating Directional, Interface, and Fiber Effects
100. Zhang Xiaoyue, Chen Zhengren, Zhou Xinting, Li Zheng et al. (2026-02)
     Experimental and Finite Element Studies of 3D-Printed Concrete-Glued Laminated Timber Composite Beams
101. Deng Yongjie, Li Weihong, Li Wei, Lyu Libo et al. (2026-02)
     Optimized Mix Design and 3D Printing Application of Magnesium Oxysulfate-Based Martian Concrete Using 100% In-Situ Resources
102. Kong Depeng, Bai Bing, Chen Jing, Zhang Haiqing (2026-02)
     Experimental Study on the Pumpability of RFG Geopolymer Concrete
103. Ding Shengxuan, Li Jiren, Wang Mingqiang (2026-02)
     Mechanical Performance and Life-Cycle Carbon Reduction Benefits of 3D-Printed Permanent-Formwork Columns Filled with Low-Magnesia Concrete
104. Zhu Wenxuan, Zhang Yu, Zhang Yunsheng, Liu Chao et al. (2026-02)
     Multiscale Investigation of Manufactured Sand Characteristics on 3D Printed Concrete Performance:
     Particle Morphology and Stone Powder Effects
105. Wang Longsheng, Huang Zili, Nguyen Giang, Karakus Murat (2026-02)
     Improving Interlayer Adhesion of 3D Printed Concrete by Filament Interlocking
106. Guo Peixi, Zhang Hanwen, Ge Enmu, Lin Ming et al. (2026-02)
     Optimization and Performance Study of 3D Printed Concrete Mixture for Underground Utility Tunnels
107. Zhang Wenchang, Liu Chuanqi, Weng Yiwei, Xue Tianju et al. (2026-02)
     A Differentiable Material Point Method Solver for the Modeling, Simulation and Analysis of Extrusion-Flow Process for 3D Concrete Printing
108. Walzer Alexander, Kozlova Mariia, Mohite Ashish, Yeomans Julian et al. (2026-02)
     How to Scale a 3D Concrete Printing Facility?:
     A Stochastic Decision-Support Framework for Production Investment
109. Oh Gyujong, Oh Sangwoo, Choi Seongcheol (2026-02)
     Carbonated Basic Oxygen Furnace Slag Fine Aggregate in Concrete:
     Laboratory Assessment and Sustainable Application in 3D-Printed Concrete Components
110. Neef Tobias, Butler Marko, Mechtcherine Viktor (2026-02)
     Methodology for Integrating Mineral-Impregnated Carbon Fibers as Reinforcement in Fine Filament 3D Concrete Printing
111. Mahmood Mir, Alias Aizat, Hasan Kamrul (2026-02)
     A Bibliometric and Technical Review of Supplementary Cementitious Materials for 3D Concrete Printing: Research Trends, Current Status, Challenges, and Future Directions
112. Catenacci Matthew, Owens Jeffery, Johnson Glenn, Nikon Charles (2026-02)
     Piston Press Extrusion as a Low-Cost Screening Tool for Cementitious Formulations in 3D Concrete Printing
113. Zhi Yefan, Ororbia Maximilian, Motavaselian Amir, Chai Hua et al. (2026-02)
     Toolpath Optimization for a Post-Tensioned Concrete 3D-Printed Floor Structure
114. Alessandro Antonella, Sousa Israel, Laflamme Simon, Ubertini Filippo (2026-02)
     Effect of Carbon Fillers and Printing Path Strategy on Damage Detection in 3D-Printed Smart Concretes for Structural Health Monitoring
115. Iozzino Fabio, Fragnito Andrea, Mauro Gerardo, Roselli Carlo (2026-02)
     Preliminary Optimization of Steady-State and Dynamic Thermal Performance of 3D Printed Foamed Concrete
116. Vetrivelan R., Gettu Ravindra, Palaniappan Sivakumar, Kumar Yogesh (2026-02)
     Embodied Carbon, Time and Cost of Two Post-Office Buildings:
     Comparison of 3D Printed Concrete and Conventional Buildings
117. Versteege Jelle, Salet Theo, Wolfs Robert (2026-02)
     Sensory Data Mapping and Database Development for Interlayer Bond Strength:
     Towards Digital Shadows in 3D Concrete Printing
118. Liu Huawei, Dai Meiling, Liu Chao, Du Hongjian (2026-02)
     Targeted Enhancement Strategy for the Rebar Interface Bond in 3D Printed Coarse Aggregate Concrete: Performance Evaluation and Mechanistic Insights
119. Yu Chaomin, Si Qi, Pan Zhihong, Ding Faxing (2026-02)
     Study on the Anisotropic Mechanical and Durability Properties of 3D-Printed Recycled PVC Concrete
120. Mercimek Ömer, Akkaya Sercan, Bıçakçıoğlu Kaan, Çelik Alper et al. (2026-02)
     Diagonal Tension Testing of 3D Printed Concrete Walls:
     Benchmarking Against Conventional Masonry
121. Berdini Daniele, Donnini Jacopo, Cognoli Roberto, Galasso Marco et al. (2026-02)
     Influence of Recycled Aggregates on Fresh and Hardened Properties of 3D Printable Concrete Mix
122. Licciardello Lucia, Meillasson Hedwige, Soto Alejandro, Kaufmann Walter (2026-02)
     Direct Tensile Test on Reinforced 3D-Printed Concrete Ties
123. Si Wen, Khan Mehran, McNally Ciaran (2026-02)
     Designing Polypropylene Fiber Reinforcement for 3D Concrete Printing:
     Rheology Control, Thixotropic Recovery and Mechanical Performance
124. Mo Jinxu, Lu Han, Ren Fengming, Lai Mianheng et al. (2026-02)
     Impact of Waste Rubber Powder Size and Replacement Ratio on the Compressive Strength Anisotropy and Pore Structure of 3D Printed Concrete
125. Sun Tianyu, Ren Zhongyuan, Liu Jiarui, Ong Dominic et al. (2026-02)
     Rheology Properties and Future Trend of 3D Printing Concrete:
     State of the Art Review
126. Rizzieri Giacomo, Lanteri Federico, Ferrara Liberato, Cremonesi Massimiliano (2026-02)
     ShapeGen3DCP:
     A Deep Learning Framework for Layer Shape Prediction in 3D Concrete Printing
127. Prakash Pawan, Tripathi Shubham, Zade Nikhil, Shariff Mohammad (2026-02)
     Experimental and Numerical Investigation of Bond and Flexural Behaviour of Additively Manufactured Structural Concrete Beams
128. Zhang Lianzhi, Li Xiao, Lin Lin, Ren Changzai et al. (2026-02)
     Analytical and Experimental Study on Fluid–Solid Coupling of Variable-Caliber Nozzles for Concrete 3D Printing
129. Garshasbi Sajad, Mousavi Seyed, Nazarpour Hadi, Dehestani Mehdi (2026-02)
     Low Carbon Dioxide 3D Printable Concrete:
     Balancing Rheology, Strength and Environmental Impact Using Bentonite and Ground Granulated Blast-Furnace Slag
130. Goel Devansh, Kore Sudarshan, Blanco Ana (2026-02)
     Understanding the Role of Supplementary Cementitious Materials in 3D Printed Concrete
131. Engel Sven, Bielak Jan, Claßen Martin (2026-02)
     Material Efficient CFRP-Reinforced Concrete Floor Slabs
132. Neef Tobias, Wen Yue, Friese Danny, Cherif Chokri et al. (2026-02)
     Digital Fabrication Methods for Carbon Reinforced Shell-Like Concrete Structures
133. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhu Chao et al. (2026-02)
     Rheological Rejuvenation and Structural Build-up of 3D Printed Manufactured Sand Concrete via Secondary Mixing Protocol
134. Yuan Yong, Zia Syed, Sheikh Taimur, Irfan ul Hassan Muhammad et al. (2026-02)
     Enhancing Interlayer Bond Strength of 3D-Printed Concrete Through Microstructural Densification by Means of Incorporating Sugarcane Bagasse Ash
135. Zheng Yuanxun, Li Yate, Xi Xinyue, Sun Zhenghan et al. (2026-02)
     Research on the Regulation of Rheological Properties of 3D Printed Recycled Concrete and Multi-Objective Optimization of Printer Parameters
136. Liu Chao, Ma Ruiyang, Liu Huawei, Dai Meiling et al. (2026-02)
     Shrinkage in Concrete Additive Manufacturing:
     A Critical Review of Mechanisms, Characterization, and Control Strategies
137. Wang Yu, Douba Ala, Rajendran Naveenkumar, Cubillos-Gamez David et al. (2026-02)
     Cellulose Nanofibers and Limestone Filler Enable High-Performance, Sustainable, and Cost-Efficient Printable Concrete
138. Kocaer Öznur (2026-02)
     Environmental Assessment of Waste-Derived Materials in 3D Concrete Printing and Cast-in-Place Construction Through a BIM-Integrated Multi-Scale Life Cycle Assessment Framework
139. Sun Hou-Qi, Zeng Jun-Jie, Wu Chao-Lan, Zhou Jie-Kai et al. (2026-02)
     In-Process Embedded FRP Grid for Enhanced Flexural Performance of 3D Printed Concrete Plates
140. Dang Thi, Tran Mien, Nguyen Thi, Nguyen Hoang (2026-02)
     Large Scale 3D Printed Concrete Wall:
     Interlayer Bonding and Shrinkage
141. Nguyen Vuong, Du Hongjian (2026-02)
     Underwater 3D Concrete Printing:
     Automation Challenges, Process-Material Coupling, and Future Construction Pathways
142. Dey Dhrutiman, Panda Biranchi, Kole Jagabandhu (2026-02)
     Investigation into the Effect of Full Replacement with Portland Slag Cement and Screened Slag Sand for Development of Sustainable 3D Printed Concrete
143. Li Long, Lu Shuaijie, Singh Amardeep, Hao Lucen et al. (2026-02)
     Improving Buildability and Reducing Carbon Emission of 3D Printed Concrete via CO2 Mixing and Waste Glass Powder:
     A Synergistic Approach
144. Santhosh S., Raphael Benny, Santhanam Manu (2026-02)
     DELRA:
     A Continuous Print Path Generation Algorithm for Concrete 3D Printing of Lattice Structures
145. Kopitha Kirushnapillai, Rajeev Pathmanathan, Sanjayan Jay, Elakneswaran Yogarajah (2026-02)
     Buildability Enhancement of 3D Printed Concrete Using Carbonated Water and Partial Replacement of OPC with Reactive MgO
146. Javan Kazem, Chaggar Pooja, Darestani Mariam, Markhali Bijan et al. (2026-02)
     Workability of Geopolymer Concrete and Mortar Materials: A Systematic Review of Influencing Parameters and Optimization for Sustainable Construction Materials
147. Tafur Ginette, Rivera Cristhofer, Torres Pablo (2026-02)
     Evaluation of Sustainable 3D Concrete with Partial Replacement of Fine Aggregate by PET and Addition of Coconut Fibers:
     Impact on Construction with the Use of 3D Gantry-Type Printers in Peru
148. Tang Boyang, Yan Jiachuan, Lin Yini, Han Xiaoyu et al. (2026-02)
     Failure Mechanism of Reinforced 3D Printed Concrete Arches:
     Transition from Brittle Fracture to Interface Bond-Slip
149. Hasan Kamrul, Alias Aizat, Hasan Mehedi, Yahaya Fadzil et al. (2026-02)
     Designing 3D-Printed Concrete with Ternary Blended Mortars Incorporating Fly Ash and Silica Fume:
     Effects of Low Water-Binder Ratios on Workability and Strength
150. Bassel Abdelshahid, Yasmeen A., Khaled Nassar (2026-02)
     Simulation-Based 3D Concrete Printing Toolpath Optimization Considering Concrete Rheology and Supporting Activities
151. Mandal Romio, Dubey Pawan, Arya Sampurna, Chakraborty Suman et al. (2026-02)
     Recycled Plastic in 3D‐Printed Cementitious Concrete: Current Status and Research Gaps
152. Chen Xusheng, Jia Zijian, Bao Bingtong, Dong Enlai et al. (2026-01)
     Effect of Coarse Aggregate and Steel Fiber Interaction under Extrusion on the Performance of 3D-Printed Steel Fiber-Reinforced Concrete
153. Hutyra Adam, Maroszek Marcin, Rudziewicz Magdalena, Góra Michał et al. (2026-01)
     Review of Material Processing Technology for 3D Concrete Printing
154. Patel Aniket, Santhanam Manu (2026-01)
     Rheological and Fresh-State Characterization for 3D-Printable Concrete:
     Evaluating Printability Across Different Binder Systems
155. Bong Shin, Zhao Yasong, Gao Yangyunzhi, Du Hongjian (2026-01)
     High-Volume Glass Powder Cementitious Material for Low-Carbon Concrete Additive Manufacturing
156. Ma Zongfang, Li Borong, Deng Ruixiang, Shang Jingkai et al. (2026-01)
     A Point Cloud-based Multi-scale Fusion Segmentation Model for Surface Pore Structures in 3D Printed Concrete
157. Uddin Md, Sajib Mahabub, Arif Arifuggaman, Ye Junhong et al. (2026-01)
     From Mix to Structure:
     A Critical Review of 3D Printed Fiber Reinforced Concrete (3DP-FRC)
158. Aghajani Delavar Mohammad, Sharma S., Chen H., Sideris Petros et al. (2026-01)
     Experimental Investigation on Full-Scale Shear-Critical 3D Printed Concrete Walls Subjected to In-Plane Cyclic Loading
159. Babajaniniashirvani Vida, McCoy Andrew, Yanamala Akhileswar (2026-01)
     Construction Transformation Through Automation:
     Analyzing the Trends and Intersection of Industrialized Construction and 3D Concrete Printing Technologies
160. Banijamali Kasra, Martin Michael, Mascareñas David, Kazemian Ali (2026-01)
     3D Geometric Measurements of 3D Printed Concrete via Structured Light Machine Vision
161. Mascareñas David, Green Andre, Kazemian Ali (2026-01)
     Neuromorphic Imaging for in-Process Monitoring of Concrete 3D Printing
162. An Dong, Zhu Zhi, Rahman Mahfuzur, Zhang Y. et al. (2026-01)
     Process-Informed Smooth Particle Hydrodynamics-Finite Element (SPH-FE) Simulation of 3D Concrete Printing:
     From Flow Behaviour to Structural Failure
163. Wang Huai, Xu Jingjie, Gong Hao, Wang Peijun et al. (2026-01)
     Behavior of Hollow Glass Microsphere Aggregate Concrete Composite Short Columns with 3D-Printed Permanent Formwork Under Axial Load
164. Sahu Akshay, Panda Biranchi (2026-01)
     Growth Curve-Based Continuous Toolpath Design for Improving the Performance of Additively Manufactured Concrete
165. Qureshi Mohsin, Shizawi Amira, Kindi Ghassan, Sawafi Bushra et al. (2026-01)
     Development of Cementitious Material by Incorporating Fine Waste Materials for Testing in Newly Developed Portable Concrete 3D Printer
166. Liu Liangchao, Liu Huawei, Ma Ruiyang, Wang Zihao et al. (2026-01)
     A Review of Carbon Capture, Utilization and Storage Technologies in Concrete Additive Manufacturing
167. Feng Lei, Chen Nuo, Wen Xiaodong (2026-01)
     Influence of Process Parameters on Interlayer Interface Mechanical Properties of 3D Printing Fiber Reinforced Concrete
168. Li Junjie, Li Yangbo, Ge Xianqiang, Li Ke et al. (2026-01)
     Strength Enhancement of 3D-Printed Phosphogypsum Concrete Based on Synergistic Activation of Multi-Solid Wastes
169. Kligys Modestas, Girskas Giedrius, Baltuškiene Daiva (2026-01)
     Influence of the Amount of Mineral Additive on the Rheological Properties and the Carbon Footprint of 3D-Printed Concrete Mixtures
170. Sapata Alise, Spuriņa Ella, Alzard Mohammed, Šlosbergs Pēteris et al. (2026-01)
     Low-CO2 Concrete from Oil Shale Ash and Construction Demolition Waste for 3D Printing
171. Robens-Radermacher Annika, Schmidt Wolfram, Unger Jörg, Mezhov Alexander (2026-01)
     Characterization of Temperature Influence on the Structural Build-Up of 3D Printed Concrete
172. Kang Yuyang, Yu Cheng, Zhang Zedi, Jia Lutao et al. (2026-01)
     The Coupling Effect of Viscosity Modifying Agents and Printing Process on the Air-Void Structure Formation of 3D Printed Air-Entrained Concrete
173. Avancini Victor, Quintana-Ruiz Osvaldo, Campello Eduardo (2026-01)
     Modeling 3D Concrete Printing Through the Combined DEM-Discrete Fresh Concrete Approach
174. Moussa Nada, Haim Mohamed, Rida Loubaba (2026-01)
     Limestone–Calcined Clay:
     An Alternative Binder for 3D Concrete Printing
175. Jhun Jihye, Lee Junghyun, Paul Suvash, Lim Sean et al. (2026-01)
     Potential of Rice Husk Biochar in 3D Concrete Printing:
     An Analysis of Fresh-State Rheology, Strength Retention, and Carbon Sequestration
176. Luo Xiaoyu, Shi Hao, Wu Ye, Chen Jiacheng et al. (2026-01)
     Inter-Filaments Pore Features and Tensile Properties of 3D Printed Concrete with Different Overlap
177. Sun Junbo, Wang Haihong, Zhang Yu, Liu Han et al. (2026-01)
     Sustainable Utilization of Waste in the 3D Printed Concrete
178. Mim Nusrat, Hosan Anwar, Shaikh Faiz, Sarker Prabir (2026-01)
     Mechanical Anisotropy and Microstructural Investigation of Copper Heap Leach Residue Incorporated 3D Printed Concrete
179. Shi Mingxue, Liu Chunpeng, Yao Yutong, Tan Zipeng et al. (2026-01)
     An Investigation of the Mechanical Properties Affecting 3D Printed Asphalt Concrete
180. Bharti Mrityunjay, Menon Arun, Santhanam Manu (2026-01)
     Experimental Study of Hardened Properties of 3D-Printed Concrete Under Compression, Tension and Shear Considering Interlayer Influence
181. Sawicki Bartłomiej, Düking Peter, Placzek Gerrit, Masur Lukas et al. (2026-01)
     Human-Robot Collaboration in Digital Fabrication with Concrete:
     Quantifying Productivity and Psychophysiological Strain of Human Workers
182. Gencel Osman, Er Yusuf, Güler Onur, Ustaoğlu Abid et al. (2026-01)
     Replacing Natural Aggregates with Phase Change Material-Based 3D Printed Aggregates in Concrete for Structural Function and Dual Thermal Energy Storage
183. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-01)
     Performance of Lightweight, Reinforced, and Assemblable 3D-Printed Concrete Columns with Low-Carbon Engineered Cementitious Composites
184. Liu Xingzi, Buswell Richard, Cavalaro Sergio, Xu Jie et al. (2026-01)
     Influence of Inter-Filament Voids on the Failure Mechanism and Compressive Strength of 3D Printed Concrete
185. Caneda-Martínez Laura, Hassan M., Demont Léo, Keita Emmanuel et al. (2026-01)
     Fast Penetration Testing of Printable Concretes with a Portable Device:
     Robustness and Calibration
186. Mu Xiaoshao, Zhang Xiaoling, He Gang, Liew Kim (2026-01)
     Toward Low-Carbon 3D Concrete Printing Through Circular Construction and Waste Valorization
187. Sawicki Bartłomiej, Chen Zhuo, Leusmann Thorsten, Kloft Harald (2026-01)
     Shotcrete 3D Printed Reinforced Concrete Beam:
     Design, Testing, and Comparison Against Conventional Cast Reinforced Concrete Solution
188. Alessandro Antonella, Sousa Israel, Ubertini Filippo (2026-01)
     Sensitive Concretes for 3D Printed Structures:
     First Physical and Electromechanical Characterization
189. Kiyani Muhammad, Kamal Muhammad, Hussain Syed, Emaan Rajja et al. (2026-01)
     A Novel Arch Infill for 3D Concrete Printed Beams:
     A Comparative Study of Flexural Performance Against Truss and Solid Designs
190. Matos Ana, Fonseca Mariana, Milheiro-Oliveira Paula, Pimentel Mário (2026-01)
     Design of Eco-Efficient »Concrete« for Digital Fabrication
191. Liu Chao, Chen Xianqin, Luo Zhiyu, Liu Huawei et al. (2026-01)
     Effects of Pore Defects on Interfacial Bonding Between Rebar and 3D Printed Coarse Aggregate Concrete Under Multiple Loading Conditions
192. Lin Yilin, Zeng Tao, Wang Yuting, Li Dehui et al. (2026-01)
     Printable and Mechanical Properties of 3D-Printed Nano-Silica Modified Concretes
193. Liao Minmao, Sun Xiao, Chen Zhaohui (2026-01)
     Simultaneous Topology and Path Optimization for 3D Concrete Printing Based on Discrete Frame Structures
194. Kechagia Aikaterini, Tzounis Lazaros, Kechagias John (2026-01)
     3D Printing Concrete:
     A Short Review of Systems and Materials
195. Ding Tao, Lian Hongqian (2026-01)
     Buildability Analysis of 3D Concrete Printing:
     A Finite Element Model Incorporating Segment-by-Segment Activation, Nozzle Constraint, and Extrusion Pressure
196. Zhang Xin, Xu Xinglong, Liu Xianda, Sun Junbo et al. (2026-01)
     Enhancing Electromagnetic Wave Absorption in 3D-Printed Concrete with Superabsorbent Polymers for High Performance
197. Singh Amardeep, Sun Jingting, Qi Deng, Abden Md et al. (2026-01)
     Evaluating Glass Powder Substitution for 3D Printed Concrete:
     Effects on Thermal Properties and Embodied Carbon
198. Agegn Adamu, Regassa Yohannes, Angassa Kenatu, Mekonnen Kebede (2026-01)
     Systematic Review on 3D Concrete Printing Technology:
     Breakthroughs and Challenges
199. Zhang Junyi, Zhang Chao, Chen Tiefeng, Li Ruisen et al. (2026-01)
     Biochar as the Rheological Modifier in Three-Dimensional Printed Concrete
200. Zhang Chao, Zhang Junyi, Su Yilin, Zhang Yuying et al. (2026-01)
     Low-Carbon 3D-Printed Concrete by Using Biochar as a Carbon Sequestrator
201. Wang Xiangyu, Wang Sizhe, Deng North, Liu Zhenbang et al. (2026-01)
     Robotic Rebar Insertion and Grouting for Reinforcement of 3D Printed Concrete:
     Technique Development and Bond Behavior Characterization
202. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud (2026-01)
     Effect of Fly Ash, Basalt Fiber and Attapulgite Nanoclay on the Fresh Properties, Rheology and Shrinkage Behaviour of Printable Concrete
203. Tushar Fazlul, Hasan Mehedi, Hasan Kamrul, Mawa Jannatul et al. (2026-01)
     Factors Affecting Flowability and Rheological Behavior of 3D Printed Concrete:
     A Comprehensive Review
204. Costa Gabriel, Maas Pyetra, Doerner Gabriel, Nazário Samara et al. (2026-01)
     Reducing the Cement Content in 3D Concrete Printing Mixtures Through Porcelain Polishing Residue Incorporation
205. Liu Zhenbang, Li Mingyang, Wang Sizhe, Deng North et al. (2026-01)
     Investigation on Bond-Slip Performance of Steel Rebar Embedded in Concrete Confined by 3D Concrete Printing Formwork
206. Sheng Zhaoliang, Ding Shaolong, Zhu Binrong, Cai Jingming et al. (2026-01)
     Bonding Performance of Toothed Interfaces in 3D Printed Alkali-Activated Concrete
207. Talukdar A., Belek Fialho Teixeira Müge, Fawzia Sabrina, Zahra Tatheer et al. (2026-01)
     Investigation on the Fresh and Mechanical Properties of Low Carbon 3D Printed Concrete Incorporating Sugarcane Bagasse Ash and Microfibers
208. Dao Trang, Chau Vinh, Tran Jonathan, Tran Mien (2026-01)
     Balancing Workability, Buildability, and Carbon Sequestration in 3D Printed Concrete via Direct CO2 Mineralization
209. Ribeiro Elis, Rangel Bárbara, Brandão Filipe, Figueiredo Bruno et al. (2026-01)
     Improving Natural Ventilation Through 3D Concrete Printing
210. Teixeira João, Jesus Manuel, Rangel Bárbara, Maia Lino et al. (2026-01)
     Expanding 3D Concrete Printing Customization with Biomimetic Textures
211. Cárdenas Valeria, Parmigiani Silvia, Vargas Juan, Restuccia Luciana et al. (2026-01)
     Incorporation of Vitrified Ashes in Lightweight Foamed Concrete for 3D Printing:
     Thermal and Mechanical Assessment
212. Lapusan Ciprian, Negrutiu Camelia, Sosa Ioan (2026-01)
     Multi-Criteria Decision Framework for Optimal Robotic System Selection in 3D Concrete Printing
213. Wang Hanmo, Wan Yujia, Owyong Shawn, Connie Lim En et al. (2026-01)
     Towards Low-Carbon Construction:
     Nature-Inspired Internal Patterns for Thermal Insulation in Lightweight Concrete Component Cast Using 3D-Printed Formwork
214. Ding Yao, Liu Yifan, Yang Bo, Liu Jiepeng et al. (2026-01)
     Application of Artificial Intelligence Technology in 3D Concrete Printing Quality Inspection and Control:
     A State-of-the-Art Review
215. Sahai Rajan, Bisht Ravindra, Malik Lavanya, Rahman Mohamed et al. (2026-01)
     Strength Evaluation of 3D Concrete Printed Layers Using in-Situ Parameters Monitoring
216. Bassi Utkarsh, Sahai Rajan, Bisht Ravindra, Verma Yash et al. (2026-01)
     Design Analysis and Development of a Benchtop 3D Concrete Printer
217. Zhang Xiaoyue, Chen Zhengren, Zhou Xinting, Li Zheng et al. (2026-01)
     Experimental Investigation on the Mechanical Performance of 3D-Printed Concrete-Glued Laminated Timber Composite Beams
218. Hechtl Christian, Dahlenburg Maximilian, Bos Freek, Kränkel Thomas et al. (2025-12)
     Adaptive-Binder-Aggregate Mixing (ABAM):
     Concept for Extrusion-Based Multi-Material 3D Concrete Printing
219. Zhu Binrong, Qi Miao, Chen Wei, Pan Jinlong (2025-12)
     Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction
220. Murali Gunasekaran, Kravchenko Ekaterina, Yuvaraj Divya, Avudaiappan Siva (2025-12)
     Next-Generation Green Construction:
     3D-Printed Geopolymer Concrete with Optimized Rheology, Mechanical Performance, and Environmental Efficiency
221. Mohammed Salhah, Aljewifi Hana, Jldain Hafeth (2025-12)
     Evaluating Compressive Strength in 3D-Printed Concrete Structures:
     A Comparative Study of ANSYS Simulations and Experimental Data
222. Paul Suvash, Lee Junghyun, Tay Yi, Amr Issam et al. (2025-12)
     Developing Sustainable 3D Printable Concrete Materials Using Olivine Sand for Carbon Sequestration
223. Huang Bo, Liu Chang, Sun Junbo, Wang Yufei et al. (2025-12)
     Optimized Synergy of Fiberglass Mesh and PP Fibers-Modified Structural Adhesive for Enhanced Mechanical and Microstructural Performance in 3D Printing Concrete
224. Cui Xiaoshuang, Pu Xianghao, Zhang Dongyang, Li Weihong et al. (2025-12)
     Study on the Mechanical Properties of 3D-Printed Continuous Jute Yarn-Reinforced Concrete
225. Kim Seung, Kim Jae (2025-12)
     Vibration-Assisted Rheological Control for 3D Printing of Precast Concrete Modules
226. Nguyen Vuong, Jie Cheah, Zhang Y., Wong Hong (2025-12)
     Effect of Infill Architecture on Structural Performance and Sustainability of 3D-Printed Reinforced Concrete Columns
227. Bang Jin, Ha Seong, Jun Yubin, Yim Hong (2025-12)
     Optimal Casting Window Defined by Electrical Resistivity for Enhancing Interfacial Bond Strength in 3D Printed-Cast Concrete Composites
228. Muñoz-Sanguinetti Claudia, Vega-Coloma Mabel, Letelier Viviana, Marrero Madelyn et al. (2025-12)
     Environmental Footprint of 3D-Printed Concrete Using Recycled Materials
229. Basith Mydeen Pitchai Mohamed Abdul (2025-12)
     Polymer-Enhanced Composites for 3D Concrete Printing:
     A Review of Materials, Processes, and Performance
230. Kalmykov Oleg, Demianenko Ivan, Potapov Sergei, Alataev Dzhmaldii (2025-12)
     Strain Energy Density-Based Topology Optimization Using SIMP and Local Failure Criteria for 3D-Printed Concrete Structures
231. Deng North, Wang Sizhe, Li Mingyang, Wang Xiangyu et al. (2025-12)
     A Perforated Strip-Based Three-Dimensional Reinforcement Strategy for 3D Printed Concrete:
     Flexural Testing of Beams as a Proof of Concept
232. Ding Tao, Wei Jun, Sun Jingting, Feng Kaikai (2025-12)
     Experimental Study on Thermal Properties of 3D Printed Concrete with Recycled Sand and Powder
233. Fatima Warsi, Syed Bustan, Panda Biranchi, Biswas Pankaj (2025-12)
     Numerical Evaluation of the Seismic Performance of Self-Centering 3D Printed Concrete Wall
234. Latorraca Tássia, Rangel Bárbara, Guimarães Ana (2025-12)
     Optimizing 3D-Printed Concrete Panels’ Thermal Performance with Materials, Metrics, and Generative Design
235. Feliciano Renzo, Barrera Natalia, Lukyanenko Artyom, Rangel Bárbara et al. (2025-12)
     Sustainable Geometries:
     A Comparative Analysis of Thermal Performance in Uninsulated 3D Printed Concrete Wall Topologies
236. Iqbal Imtiaz, Kasim Tala, Besklubova Svetlana, Inqiad Waleed et al. (2025-12)
     Exploring Knowledge Domains and Future Research Directions in 3D Printed Concrete:
     A Bibliometric and Systematic Review
237. Huang Qunyi, Huang Qingyu, Yang Hong, Zhang Jiahang et al. (2025-12)
     Research on the Workability of 3D Printed Fiber-Reinforced Concrete Materials
238. Liu Mei, Wang Huai, Li Yang, Li Xiulin et al. (2025-12)
     Post-Fire Mechanical Properties of 3D Printed Concrete Under Different Cooling Methods
239. Shaik Khaja, Perumalla Mallikarjun, Boilla Charan (2025-12)
     Topology Optimization with Experimental-Numerical Investigation of 3D-Printed Concrete Elements
240. Akgümüş Fatih, Şahin Hatice, İsafça Kaya Tuğçe, Mardani Ali (2025-12)
     Combined Effect of Recycled Tire Steel Fiber and Blast Furnace Slag on the Mechanical Performance of 3D Printable Concrete
241. Kamhawi Abdallah, Lin Yuxin, Watson Christopher, Barton Kira et al. (2025-12)
     A Framework for Process Anomaly Detection in 3D Concrete Printing
242. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-12)
     Effect of Aggregate-to-Binder Ratio on 3D Printed Concrete:
     Printability, Mechanics, and Shrinkage
243. Slavcheva Galina, Levchenko Artem, Artamonova Olga, Karakchi-Ogli Davut et al. (2025-12)
     Mechanical Behavior and Reinforcement Efficiency of 3D Printed Concrete Under Compression, Tension, and Bending
244. Xiao Wei (2025-12)
     Research on the Mechanical and Durability Properties of Carbon Fiber Reinforced 3D Printed Concrete
245. Okangba Stanley, Ngcobo Ntebo, Mahachi Jeffrey (2025-12)
     Bridging Innovation and Governance:
     A UTAUT-Based Mixed-Method Study of 3D Concrete Printing Technology Acceptance in South Africa
246. Gierlinger David, Hansemann Georg, Schmid Robert, Trummer Andreas et al. (2025-12)
     Design and Construction with 3D Concrete Printing
247. Subramaniam Kolluru, Maganty Sohanth, Kamakshi Tippabhotla, Ghandhi Dhruv et al. (2025-12)
     Design and Deployment of a Functionally Efficient 3D-Printed Concrete Bridge Developed by Form Optimization
248. Koneswaran Bahirathan, Rajeev Pathmanathan, Sanjayan Jay (2025-12)
     3D Concrete-Printed Geocell for Reinforcing Unbound Granular Pavement Layers
249. Sun Yuhang, Yang Xiaojie, Liu Xiongfei, Ma Guowei et al. (2025-12)
     Coordinated Spray-Based 3D Printing of Reinforced Concrete Structure:
     A Multi-Angle Strategy for Blockage Mitigation
250. Kovaleva Daria, Haufe Carl, Miller Olga, Gericke Oliver et al. (2025-12)
     Lightweight and Sustainable Construction with Concrete:
     The Role of Digital Design and Manufacturing Methods at ILEK
251. Wang Jinjin, Li Shouzhen, Qiu Jin, Chen Cheng et al. (2025-12)
     Experimental Investigation on Thermal Performance of 3D Printed Concrete Elements Subjected to Radiant Heating
252. Baghdadi Abtin, Khanipour Raad Kian, Dörrie Robin, Kloft Harald (2025-12)
     Fabrication of Dry Connection Through Stamping and Milling of Green-State Concrete
253. Ferrara Liberato, Rizzieri Giacomo, Cremonesi Massimiliano (2025-12)
     A Particle Fluid Dynamics Modelling Approach to Design 3D Concrete Printing Materials and Processes
254. Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
     Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
     A Systematic Review
255. Rangel Carolina, Salet Theo, Lucas Sandra (2025-12)
     A Design Methodology for Sustainable Lightweight 3D-Printable Concrete with SCMs
256. Jacobi Ando, Zöllner Jan-Phillip, Hack Norman, Mai (née Dressler) Inka (2025-12)
     Encasement of Pre-Placed Reinforcement in Injection 3D Concrete Printing:
     The Effect of Rheology and Process Parameters
257. Iqbal Imtiaz, Kasim Tala, Besklubova Svetlana, Mustafa Ali et al. (2025-12)
     Passive Determination of Anisotropic Compressive Strength of 3D Printed Concrete Using Multiple Neural Networks Enhanced with Explainable Machine Learning (XML)
258. Deetman Arjen, Bos Derk, Lucas Sandra, Salet Theo et al. (2025-12)
     A Database Framework for 3D Concrete Printing
259. Anton Ana-Maria, Lin Che, Dillenburger Benjamin (2025-12)
     Reinforcement Concepts for 3D Concrete Printing and Modular Construction in Tor Alva
260. Hammoud Ahmad, Mohomad Yosef, Shomar Hasan, Masad Eyad et al. (2025-12)
     Data-Driven Framework for Printability and Geometric Quality Prediction in 3D Concrete Printing
261. Iqbal Imtiaz, Inqiad Waleed, Kasim Tala, Besklubova Svetlana et al. (2025-12)
     Strength Characterisation of Fly Ash Blended 3D Printed Concrete Enhanced with Explainable Machine Learning
262. Rojas Jorge, Hasanzadeh Sogand (2025-12)
     A Unified Workflow for Enhanced Efficiency in 3D Concrete Printing Using a 6 DoF Robotic Arm
263. Babajaniniashirvani Vida, Afsari Kereshmeh, McCoy Andrew (2025-12)
     Investigating Key Competencies for 3D Concrete Printing in Affordable Housing
264. Tong Zhongling, Guan Qingtao, Elabbasy Ahmed, Ateah Ali et al. (2025-12)
     Empowering 3D Printed Concrete:
     Discovering the Impact of Steel Fiber Reinforcement on Mechanical Performance
265. Wen Kuo-Wei, Su Yen-Fang, Mo Kim, Hung Chung-Chan (2025-12)
     Time-Dependent Rheology, Green Strength, and Buildability of 3D-Printed Ultra-High Performance Concrete Incorporating Various Fiber Types and Contents
266. Sunny Akash, Jayaprakash Jaganathan (2025-12)
     Unveiling the Printing Success of Concrete 3D Printed Models:
     A Simulation Study with Voxel Print and Abaqus Using Design of Experiments
267. Han Seongho, Ahn Eunjong, Shin Myoungsu, Popovics John et al. (2025-12)
     Methodology for Surface Defect Assessment in 3D Concrete Printing Using Computer-Vision and Ultrasonic Testing Considering Structural Build-Up
268. Wang Hailong, Shi Yiqing, Sun Xiaoyan, Lin Xiqiang et al. (2025-12)
     Design, Multi-Scale Structural Analysis, and Construction of Modular Prefabricated 3D-Printed Concrete Residence
269. Nermend Loran, Skibicki Szymon, Techman Mateusz, Federowicz Karol et al. (2025-12)
     Electrical Resistivity and Elevated Temperature Performance of 3D Printed Concrete Containing Nanosized Radiation Shielding Admixtures
270. Liu Xuelin, Kong Jiafeng, Chen Yidong, Wang Liang et al. (2025-12)
     Rheology and Printability Control of Low-Carbon 3D-Printed Cementitious Materials via Circular Use of Recycled Concrete Powder
271. Sifan Mohamed, Upasiri Irindu, Poologanathan Keerthan, Popo-Ola Sunday et al. (2025-12)
     Fire Performance and Design of LSF Wall Panels with 3D Printed Concrete and Steel Lipped Channel Sections
272. Luo Xiaoyu, Zhao Yuqi, Yang Min, Yao Xiaofei et al. (2025-12)
     Introducing Cement Composite Agents During Printing Process to Enhance the 3D-Printed Concrete Interfaces Between Layers and Filaments
273. Telichko Victor, Slavcheva Galina, Levchenko Artem (2025-12)
     Experimentally Verified FE Model of Bending Reinforced 3D-Printed Concrete Elements
274. Iqbal Imtiaz, Kasim Tala, Inqiad Waleed, Besklubova Svetlana et al. (2025-11)
     Effect of Metakaolin and Biochar Addition on the Performance of 3D Concrete Printing:
     A Meta-Analysis Approach
275. Tenesesku Vladyslav (2025-11)
     Technological Aspects of Fabricating a Reinforced Concrete Shell Using 3D Concrete Printing
276. Liu Huawei, Tao Yaxin, Zhu Chao, Liu Chao et al. (2025-11)
     3D Printed Concrete with Recycled Coarse Aggregate:
     Freeze-Thaw Resistance Assessment and Damage Mechanisms
277. Tao Jie-Lin, Hu Shengming, Duan Zhenhua, Jiao Dengwu (2025-11)
     Magneto-Responsive Flow Behavior and Early-Age Microstructural Evolution of 3D Printing Lightweight Concrete with Fly Ash Cenospheres
278. Mansouri Abraham, Mourad Bahaa, Birhane Bezawit, Denbel Nuhamin et al. (2025-11)
     Noncontact Measurement of Thermal Resistance in 3D Concrete Printing Building Envelopes Using Infrared Sensing and Arduino
279. Wang Zherui, Teitelbaum E., Akbarzadeh Masoud, Aviv D. (2025-11)
     Experimental Assessment on Thermal Mass Performance of Structurally Optimized, 3D-Printed Concrete Floor Element for Carbon Emission Reduction
280. Abbas Yassir, Alsaif Abdulaziz (2025-11)
     Explainable Data-Driven Modeling for Optimized Mix Design of 3D-Printed Concrete:
     Interpreting Nonlinear Synergies Among Binder Components and Proportions
281. Fasihi Ali, Libre Nicolas (2025-11)
     Tip Penetration Test for Rapid in-Line Assessment of Static Yield Stress During 3D Concrete Printing Process
282. Sikora Paweł, Federowicz Karol, Skibicki Szymon, Techman Mateusz et al. (2025-11)
     Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates and Recycled Concrete Powder:
     Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance.
283. Vargas José, Breseghello Luca, Silfwerbrand Johan (2025-11)
     Circular Hybrid Façades:
     Responsive Design of Thermally Efficient 3D Printed Concrete Skins on Reused Concrete Elements
284. Özdemir Salih, Alaçam Sema (2025-11)
     Cognitive Ecosystem for Lifecycle-Adaptive and Sustainable 3D Concrete Printing
285. Álvarez Luisa, Fernandez Brian, Saldarriaga Federico, Romero Héctor et al. (2025-11)
     Development and Bioclimatic Evaluation of Parametrically Designed Geometries for 3D-Printed Concrete Walls
286. Yu Hao, Zhang Weiwei, Liew Jia, Yin Binbin et al. (2025-11)
     Simulating Material Flow and Extrusion Dynamics in 3D Concrete Printing
287. Meier Niklas, Herding Friedrich, Zetzener Harald, Mai (née Dressler) Inka et al. (2025-11)
     Surface Modification of Bulk Material for Particle Bed 3D Concrete Printing:
     Effect on Wettability, Porosity, and Mechanical Properties
288. Athira R., Sathyan Dhanya (2025-11)
     Review of 3D Printing Advancements in Geopolymer Concrete:
     Current Challenges and Future Directions
289. Manickavasakam Karnan, Huri Mohammed, Kharma Khaled, Hosan Anwar et al. (2025-11)
     Smart 3D-Printed Concrete:
     Recent Advances in Self-Sensing Mix Design and Functional Reinforcements
290. Ghodke Swapnil, Singh Bhupinder, Chowdhury Shubhankar (2025-11)
     Some Insights on Role of Water Film-Thickness in Rheology of Coarse Aggregate-Based 3D Printable Concrete
291. Korol Ewelina, Jenta Arkadiusz, Chaudhari Ojas, Wójcik Michal (2025-11)
     Experimental Investigation of Concrete Beams Under Bending, Manufactured with 3D Additive Printing Technology
292. Ebiloma David, Olatunbosun Olajumoke, Isang Inimbom, Aigbavboa Clinton (2025-11)
     Assessing the Effects of 3D-Printed Concrete for Sustainable Construction:
     The Stakeholders' Perspective
293. Ma Jiayue, Samarasinghe Don, Rotimi James, Zuo Kelvin (2025-11)
     Establishing Research Methods for 3D Concrete Printing Supply Chain Studies:
     Insights from Literature and Practice
294. Biswas Rajib, Saito Takahiro, Ito Atsushi (2025-11)
     Experimental Evaluation of a Novel 3D-Printed Permanent Concrete Formwork
295. Xia Chen, Lee Chang, Leifer Max, Zheng Bujingda (2025-11)
     Additive Reinforced Concrete for Multifunctional Construction Component
296. Patel Aniket, Tripathi Avinaya, Kiran Ravi, Santhanam Manu et al. (2025-11)
     Decoupling Early-Age Free Shrinkage and Restraint Effects in 3D Printed Concrete Using Digital Image Correlation
297. Zhou Jiehang, Du Longyu, Wu Kai, Lai Jianzhong et al. (2025-11)
     Effective Factors and a Prediction Method on Extrusion Flow of 3D Printed Concrete
298. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2025-11)
     Enhancing Thermo-Mechanical and Moisture Properties of 3D-Printed Concrete Through Recycled Ultra-Fine Waste Glass Powder:
     Corrigendum
299. Liu Xianda, Sun Junbo, Chen Hui, Liu Chang et al. (2025-11)
     3D Printed Concrete with Red Mud Incorporation:
     Influence of Red Mud Manufacturing Procedures on Mechanical Properties at Elevated Temperatures
300. Najm-Eddine Asmae, Abouelmajd Mohamed, Najm-Eddine Youssef, Erritali Ilham et al. (2025-11)
     Topological Optimization in 3D Concrete Printing Structures:
     A Review
301. Baah Thomas, Kim Heejeong, Latypov Marat (2025-11)
     Multi-Objective Adaptive Experimental Approach for Optimizing 3D Concrete Printing Mixtures and Parameters Incorporating Construction and Demolition Waste for Sustainable Construction
302. Hasan Md, Xu Jie, Uddin Md (2025-11)
     A Critical Review of 3D Printed Fiber-Based Geopolymer Concrete:
     Fresh Properties, Mechanical Performance, and Current Limitations
303. Sun Yan, Du Guoqiang, Mudasir Maryam (2025-11)
     Rheological Investigations of Fresh Fiber-Reinforced Cementitious Composites Using Hydrophobic / Hydrophilic UHMWPE Fibers for 3D Concrete Printing Evaluation
304. Adeel Muhammad (2025-11)
     Three-Dimensional Concrete Printing for Sustainable Construction and Architecture:
     A Comprehensive Review
305. Megahed Mai, Abou Zeid Mohamed (2025-11)
     Toward Sustainable 3D Concrete Printing:
     Assessment of SCM-Superplasticizer Interactions on Rheology and Buildability
306. Givkashi Mohammad (2025-11)
     Durability of 3D Printed Concrete Containing Air-Entraining Agent:
     Evaluating the Importance of Carbonation Resistance
307. Lim Sean, Lee Junghyun, Bawarith Nuran, Paul Suvash et al. (2025-11)
     The Efficacy of Self-Curing Agents on Enhanced Internal Curing and Accelerated Carbonation with CO2-Steam Integrated 3D Concrete Printing
308. Bates Rhys, Aslani Farhad (2025-11)
     Performance of 3D-Printed Concrete Columns with GFRP Rebars Under Axial Compression
309. Zeng Jun-Jie, Jiang Yuan, Yan Zitong, Sun Hou-Qi et al. (2025-11)
     3D Printing of Continuous Carbon Fiber-Reinforced Polymer Reinforcement for Concrete Columns
310. Fahmy Mohamed, Zainaddin Aqeel, Allo Raafat (2025-11)
     Evaluating the Impact of Different Variables on the Aesthetic Appearance and Structural Integrity of 3D Concrete Printed Panels
311. Menkabo Mazin, Acero Carlos (2025-11)
     Transforming Construction with 3D Concrete Printing:
     Aramco's Experience and Insights
312. Lu Qi, Hua Sudong, Yue Hongfei (2025-11)
     Effect of Spherical Electric Arc Slag on Solid Waste-Based 3D-Printed Concrete
313. Xu Shuhao, Lin Xing-Tao, Chen Xiangsheng (2025-11)
     Numerical Investigation of Anisotropic in 3D Printed Concrete Specimens Considering the Effects of Weak Interfaces and Pore-Induced Defects
314. Diggs-McGee Brandy, Samouh Hamza, Garg Nishant (2025-11)
     Predicting Cementitious Set Times via Infrared Thermography:
     Potential Implications on Real-Time Quality Control During 3D Concrete Printing
315. Zhu Xiaowei, Zhang Xudong, Zhang Jicheng, Chen Miao et al. (2025-11)
     Study on Anisotropic Thermal and Mechanical Properties of 3D-Printed Scrap-Aerogel-Incorporated Concrete
316. Sun Yuhang, Li Chuang, Liu Xiongfei, Wang Li et al. (2025-11)
     Enhancing Sulfate Resistance of Spray-Based 3D Printed Recycled Tunnel Slag Concrete Through Polypropylene Fiber Optimization
317. Nakase Kota, Zhou Yubao, Hashimoto Katsufumi, Sugiyama Takafumi et al. (2025-11)
     Acoustic Emission Monitoring of Fracture Behaviour of 3D Printed Concrete with Different Printing Paths
318. Pandum Jeero, Hashimoto Katsufumi, Sugiyama Takafumi, Nakase Kota (2025-11)
     AI-Driven Evaluation of 3D-Printed Concrete:
     Analyzing Printed Patterns Using Impact-Echo and Acoustic Emission
319. Liu Xiongfei, Wang Haonan, Chen Jinnan, Sun Yuhang et al. (2025-11)
     Fiber Orientation Control in Spray-Based 3D Printed Steel Fiber Reinforced Concrete
320. Changez Kashif, Aslam Jawad, Bhutta Muhammad, Butt Shahid (2025-11)
     Hybrid Additive Strategies for Sustainable 3D Concrete Printing:
     Balancing Printability, Early-Stage Strength, and Eco-Efficiency
321. Zhang Hui, Wu Jie, Huang Bo-Tao, Yu Rena et al. (2025-11)
     Cross-Scale Mechanisms of Anisotropy in 3D-Printed Ultra-High-Performance Concrete
322. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-11)
     Examining the Multi-Scale Toughening Mechanisms and Mechanical Anisotropic Behavior of 3D Printed Concrete Reinforced with Calcium Sulfate Whiskers and Mixed Fibers
323. Janani Parthiban, Ganesh G. (2025-11)
     Synergistic Effects of Polypropylene Fibers on the Strength and Durability Properties of 3D Printed Concrete
324. Tang Jiyu, Wang Zhihang, Gao Danying, Yang Lin et al. (2025-11)
     Research Progress on 3D Printed Geopolymer Concrete
325. Assi Lateef, Alsalman Ali, Kareem Rahman, Carter Kealy (2025-11)
     Advantages and Challenges of 3D Geopolymer-Based Concrete in Construction
326. Hasani Alireza, Dorafshan Sattar (2025-11)
     Evaluation of Fresh, Hardened, and Durability Properties of Three-Dimensional Concrete Printed Pipes
327. Marco Giancarlo, Yau Ho, Lombardi Davide (2025-10)
     Stress-Informed Non-Planar Slicing for 3D Concrete Printing
328. Nair Sajitha, Nagarajan Praveen, Thampi Santosh, Das Sudha et al. (2025-10)
     Life Cycle-Based Sustainability Assessment of Optimized 3D Printable Concrete Mixes Incorporating Scms and Recycled Aggregates
329. Garshasbi Sajad, Mousavi Seyed, Dehestani Mehdi, Nazarpour Hadi (2025-10)
     Sustainable Production of 3D Concrete Printing Using Agricultural Waste Fibers
330. Mostert Jean-Pierre, Kruger Jacques (2025-10)
     Numerically Optimised Filament Surface Topology Towards Maximum Bond Strength in 3D Printed Concrete
331. Zhi Yefan, Akbarzadeh Masoud (2025-10)
     Surface-Toolpath Twins of Shell Components in 3D Concrete Printing for Optimized Buildability and Surface Quality
332. Yavartanoo Fahimeh, Bolhassani Damon, Akbarzadeh Masoud, Ororbia Maximilian et al. (2025-10)
     Advanced Finite Element Modeling of 3D-Printed Post-Tensioned Concrete Beams with Experimental Validation
333. Marco Giancarlo, Cheung Lok (2025-10)
     Real-Time Defect Detection, Analysis and Suggestion in Adaptive 3D Concrete Printing via Multimodal LLM Integration
334. Müller Niklas, Claßen Martin (2025-10)
     Additive Manufacturing of Topology-Optimized Lightweight Slabs Using Foam Concrete
335. Alhussain Ali, Duarte José, Brown Nathan (2025-10)
     Stress-Guided Corrugated Geometry for 3D Concrete PrintedBuilding Envelopes
336. Fromm Asko, Gross Rolf, Schomann Melanie, Smogor Jagoda et al. (2025-10)
     Method of Manufacturing a Multifunctional Concrete Component
337. Kim Chisung, Rider Benjamin, Stewart Lauren, Kurtis Kimberly et al. (2025-10)
     Towards a Design-to-Fabrication Workflow for 3D Concrete Printed Drainage Invert Shell Structures
338. Kiński Wojciech, Siwicki Przemysław, Zieliński Jacek, Smater Michał (2025-10)
     Adaptation of a Large-Scale, Modular Printer-Milling Machine for 3D Printing from Concrete
339. Wang Hailong, Song Xinlei, Shen Wenbin, Sun Xiaoyan et al. (2025-10)
     Evaluation and Optimization of 3D-Printed Concrete Based on Flowability Considering Printability and Micro-Pore Characteristics
340. González-Aviña J., Hosseinpoor Masoud, Yahia Ammar, Kohandelnia Mojtaba et al. (2025-10)
     Anionic Biopolymers to Enhance Concrete Rheological Properties for 3D Printing Applications
341. Bradshaw James, Balasubramanian Swathi, Si Wen, Khan Mehran et al. (2025-10)
     Towards Greener 3D Printing:
     A Performance Evaluation of Silica Fume-Modified Low-Carbon Concrete
342. Paul Suvash, Lee Junghyun, Tay Yi, Lim Sean et al. (2025-10)
     Unlocking the Sustainable Potential of 3D Concrete Printing with Large Aggregates and Steam–CO2 Curing
343. Haripan Vislavath, Senthilnathan Shanmugaraj, Santhanam Manu, Raphael Benny (2025-10)
     Printability Assessment of Concrete 3D Printed Elements with Recycled Fine Aggregate
344. Kul Anil, Kocaer Öznur (2025-10)
     Parametric Analysis of Design and Operational Parameters in 3D Concrete Printing of Wall Elements
345. Zhang Chao, Zhu Xiaohong, Li Muduo, Zhang Yuying et al. (2025-10)
     Enhancing Interface Adhesion of 3D Printable Concrete by Biochar Integration
346. Mesoudy Mouad, Foulki Rida, Amegouz Driss (2025-10)
     3D Concrete Printing:
     Optimizing the Design of Interlocking 3D Printed Concrete Blocks for Fast and Sustainable Construction
347. Ataei Sarah, Jafari Amirhosein (2025-10)
     Comparative Environmental Impact Assessment of 3D Concrete Printing and Precast Techniques in Bridge Construction:
     A Case Study Analysis
348. Albostami Asad, Mohammad Malek, Ismael Bashar, Hamd Rwayda (2025-10)
     Optimized Strength Predictions for 3D Printed Fiber-Reinforced Concrete:
     Machine Learning-Driven Insights
349. Ngo Than, Li Shuai, Huynh Tien, Zhang Y. et al. (2025-10)
     3D Printable Hemp Concrete:
     Rheological, Mechanical, and Microstructural Properties
350. Crook Thomas, Li Matthew, Buswell Richard, Allinson David (2025-10)
     Anisotropic Hygrothermal Properties of 3D Printed Concrete
351. Elselmy Rowan (2025-10)
     AI-Driven Cymatic Architecture:
     Integrating Generative AI and Sound Data for 3D Concrete Printed Façade Design
352. Shang Yuqing, Yu Zheming, Ma Wei, Wei Jun et al. (2025-10)
     Research on 3D Printing Materials and Printing Parameters of Basalt Fiber Reinforced Concrete
353. Ye Fan, Ren Xiaodan (2025-10)
     A Eulerian Circuit-Based Reinforcement Learning Path Optimization Method for 3D Concrete Printing
354. Jamjala Siva, Thulasirangan Lakshmidevi Manivannan, Reddy K., Kafle Bidur et al. (2025-10)
     A Critical Review on Synergistic Integration of Nanomaterials in 3D-Printed Concrete:
     Rheology to Microstructure and Eco-Functionality
355. Niu Huaxian, Yu Bo, Hao Ji (2025-10)
     CFD-Based Flow Field Analysis of Spiral Nozzles in 3D Concrete Printing
356. Simwanda Lenganji, David Abayomi, Gatheeshgar Perampalam, Olalusi Oladimeji et al. (2025-10)
     Optimisation of Interlayer Bond Strength in 3D-Printed Concrete Using Response Surface Methodology and Artificial Neural Networks
357. Bianco Nicola, Fragnito Andrea, Iasiello Marcello, Mauro Gerardo et al. (2025-10)
     Numerical Analysis of a 3D Printed Concrete Envelope Incorporating PCM Nanoparticles
358. Barry Mamadou, Jacquet Yohan, Perrot Arnaud (2025-10)
     Pocket Vane and Penetrometer as Quality Control Tool for Extrusion 3D Concrete Printing
359. Foulki Rida, Mesoudy Mouad, Cherkaoui Khalid (2025-10)
     Numerical and Theoretical Analysis of Pumping and Extrusion in 3D Concrete Printing
360. Pfleger Marc-Patrick, Radl Elisabeth, Sam Nina, Vill Markus (2025-10)
     3D Concrete Printing of Thin-Walled Load-Bearing Reinforced Structures
361. Verma Shilpi, Parghi Anant (2025-10)
     Machine Learning-Based Prediction of Compressive Strength in Additive Manufacturing of Concrete Technology
362. Couque Pierre, Carneau Paul, Corvez Dominique, Tanant Julien et al. (2025-10)
     3D Printed Concrete - Applications for the Industry:
     Latest Feedback from France
363. Pal Abhipsa, Wan-Wendner Lin (2025-10)
     3D Concrete Printing and Infill Patterns of Energy Efficient Structural Wall Elements
364. Das Jyotish, Pratama M., Nematollahi Behzad, Guadagnini Maurizio (2025-10)
     Durability Performance of 3D-Printed Ultra-High Strength Concrete Incorporating Corrosion Inhibitor
365. Uddin Md, Mostazid Md, Faysal Md, Shi Xinjun (2025-10)
     Developing a Novel Strength Predictive Modeling for 3D Printable Geopolymer Concrete:
     An Interpretable Data-Driven Approach
366. Drumond Pedro, Milagres Geysiane, Parassen Paloma, Santos Luana et al. (2025-10)
     Assessment of Printing Direction in Flexural Tests of 3D Printed Reinforced Concrete Beams
367. Sedighi Saeed, Rahai Alireza, Moodi Faramarz (2025-10)
     Multi-Criteria Optimization for Sustainable Concrete Mix Considering the Synergistic Effect of Recycled Steel Fiber and LC3 Concrete
368. Kim Yoon-Chul, Han Tong-Seok (2025-10)
     Buildability Analysis in 3D Concrete Printing Using Computer Vision and Automated Annotation
369. Ding Tao, Zhu Ruitao, Yu Kequan, Xiao Jianzhuang (2025-10)
     Direct Tensile Behavior of Three-Dimensional-Printable Steel Fiber-Reinforced Ultrahigh Performance Concrete
370. Altehaini Zakiah, Dayili Mohammed, Alrajab Meshari, Harbi Adel et al. (2025-10)
     Deploying 3D Concrete Printing for Large-Scale Building Construction in Saudi Arabia:
     A Case Study
371. Apsari Auliagitta, Tambusay Asdam, Suprobo Priyo, Suryanto Benny (2025-10)
     Influence of Printing Speed and Nozzle Size on Buildability of 3D Printed Concrete Walls:
     A Nonlinear Finite Element Study
372. Akgümüş Fatih, Şahin Hatice, Mardani Ali (2025-10)
     Investigation of Waste Steel Fiber Usage Rate and Length Change on Some Fresh State Properties of 3D Printable Concrete Mixtures
373. Giulivo Marco, Capozzi Vittorio, Menna Costantino (2025-10)
     Experimental and Analytical Assessment of the in-Plane Behaviour of 3D Printed Concrete Walls Subjected to Cyclic Loads
374. Wang Huai, Li Xiulin, Gong Hao, Xu Jingjie et al. (2025-10)
     Thermal and Mechanical Properties of 3D-Printed Fiber-Reinforced Lightweight Concrete Based on Air Entrainment and Hollow Glass Microspheres
375. Varghese Renny, Rangel Bárbara, Maia Lino (2025-10)
     Strength, Structure, and Sustainability in 3D-Printed Concrete Using Different Types of Fiber Reinforcements
376. Bhowmik Anirban, Bhattacharjee Biswajoy, Sahu Prakash (2025-10)
     3D Concrete Printing:
     Pioneering Innovations and Recent Development
377. Xia Kailun, Chen Yuning, Jia Lutao, Quan Shitao et al. (2025-10)
     The Impact of Internal Stress Generated During the Printing Process on the Early-Age Properties of 3D Printed Concrete
378. Teng Fei, Yang Minxin, Yu Jie, Weng Yiwei et al. (2025-10)
     Multi-Material 3D Concrete Printing:
     Automated Hybrid Reinforcements Using Textile and Strain-Hardening Cementitious Composites
379. Sakha Mahsa, Raza Saim, Wang Xiaomeng, Fan Haifeng et al. (2025-10)
     Design Optimization and Assessment of Stay-in-Place 3D Printed Concrete Formwork for Slabs
380. Ma Wei, Chen Junjie, Dai Yuntong, Zhou Yaya et al. (2025-10)
     Mechanical Properties of 3D Printed Concrete Irregular Structural Formwork:
     Experimental Study and Finite Element Analysis
381. Boldini Alain, Giwa Ilerioluwa, Kamel Ehsan, Kazemian Ali (2025-10)
     Spatiotemporal Temperature Prediction in 3D-Printed Sulfur Concrete for Automated Construction on Earth and Beyond
382. Luo Rui, Sun Bin, Fei Xiangpeng, Du Hongjian (2025-10)
     Interlayer Strength Loss in 3D Printed Concrete Due to Time-Gap-Induced Macroporosity
383. Kim Tae, Oh Sangwoo, Lee Jinsuk, Choi Seongcheol et al. (2025-10)
     Experimental Data-Driven Framework for Quality Control of 3D-Printed Concrete Permanent Formworks
384. Wan Qian, Wang Li, Huang Xiaodong, Wu Hao et al. (2025-10)
     Shape Optimization Based on Isogeometric Analysis for 3D Concrete Printing:
     A Design Method for Printing-Friendly Structure
385. Delavar Mohammad, Aslani Farhad, Sercombe Tim (2025-10)
     Cracking Behaviour in 3D Concrete Printed Fiber-Reinforced Cementitious Composites:
     A Review
386. Marrero-Rosa Raul, Gomaa Shady, Irizarry Elmer, Ahmed Hassan et al. (2025-10)
     Additive Manufacturing of Ultra-High-Performance Concrete:
     From Mechanical Characterization to Large-Scale Application
387. Lyu Ping, Wang Kejin, Doyle Shelby, Laflamme Simon et al. (2025-10)
     Green 3D Printing Concrete Containing Biochar and Waste Wind Turbine Blade Powder
388. Han Seongho, Addai-NImoh Alfred, Gu Yucun, Khayat Kamal (2025-10)
     Enhanced Shape Stability of Flowable Mortar Through CO2 Injection for 3D Concrete Printing Application
389. Santhanam Manu (2025-10)
     Multi-Scale Assessment of the Structural Performance of 3D Printed Concrete
390. Lale Erol, Ayhan Bahar, Ahmed Ayesha, Irizarry Elmer et al. (2025-10)
     Computational Simulations Fresh-to-Solid Transition for Additive Manufacturing of Ultra-High-Performance Fiber Reinforced Concrete
391. Lange David, Shen Chuanyue (2025-10)
     Modeling the Fresh Properties of Cement-Based Materials for 3D Concrete Printing
392. Kamakshi Tippabhotla, Chau Bao, Tugelbayev Aidyn, McCoy Andrew et al. (2025-10)
     Developing 3D Printable Concrete Using Quarry by-Products as Partial Replacement for Cement
393. Subramaniam Kolluru, Singh Prashant, Maganty Sohanth, Paritala Spandana (2025-10)
     Form Optimization Applications of 3D Concrete Printing:
     From Bridge to Protective Structures
394. Shekhar Shashank, Kumar Manish, Mathur Rishabh (2025-10)
     Additive Manufacturing of Concrete with Low Initial Yield Strength Through Controlled Heating of Printed Layers
395. Rizzieri Giacomo, Lanteri Federico, Ferrara Liberato, Cremonesi Massimiliano (2025-10)
     ShapeGen3DCP:
     A Deep Learning Framework for Layer Shape Prediction in 3D Concrete Printing
396. Mahmood Ali, Nanos Nikos, Begg David, Dhakal Hom (2025-10)
     Recycled Waste Materials Utilised in 3D Concrete Printing for Construction Applications:
     A Scientometric Review
397. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2025-10)
     Adaptive Velocity Compensation for Optimal 3D Concrete Printing in Uncontrolled Environments
398. Ye Htun Thet, Panuwatwanich Kriengsak, Tanapornraweekit Ganchai, Jongvisuttisun Passarin et al. (2025-10)
     Carbon Emission Assessment of 3D Printed Hybrid Modular Concrete Building:
     Work Breakdown Structure
399. Gonsalves Nicolas, Morgan Ashlei, Thiele Heidi, Olarra Andre et al. (2025-10)
     3D Printing of Sustainable Infrastructure Using Rapid-Set Clay Concrete with Biobased Additives
400. Miri Zahra, Baaj Hassan, Polak Maria (2025-10)
     Exploring Interfaces in 3D-Printed Concrete Through Cohesive Zone Modelling
401. Thajeel Marwah, Chalawi Ameen, Balázs György (2025-09)
     Printability and Strength of 3D-Printed Concrete:
     Role of Mix Design and Printing Parameters
402. Válek Josef, Romanová Dorota (2025-09)
     3D Concrete Printing Simulating Device in Comparison to Real Printing and Aggregate Substitutes
403. Paritala Spandana, Raj Shubham, Singh Prashant, Subramaniam Kolluru (2025-09)
     Designing 3D Printable Concrete by Integrating the Influence of Aggregate Characteristics
404. Akter Usmi, Rezvi Syed, Ratul Md., Kishor Saad (2025-09)
     Optimization of Data-Driven Ensemble Models Using Firefly Algorithm for Enhanced 3D Printed Concrete Strength Prediction
405. Maroszek Marcin, Rudziewicz Magdalena, Hebda Marek (2025-09)
     Recycled Components in 3D Concrete Printing Mixes:
     A Review
406. Rudziewicz Magdalena, Maroszek Marcin, Hebda Marek (2025-09)
     Comparison of Porosity and Thermal Conductivity of Concrete and Alkali-Activated Hybrid Binders in 3D-Printed Fiber-Reinforced Foamed Composites
407. Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph, Hüsken Götz (2025-09)
     Investigating the Impact of Material Rheology on Geometric Accuracy in 3D Concrete Printing Using Real-Time Monitoring
408. Yamakawa Soji, Vazquez-Santiago Kyshalee, Xia Yixuan, Ogura Hiroki et al. (2025-09)
     Concrete Spray 3D Printing Simulator for Nozzle Trajectory Planning
409. Xie Xiangyu, Liu Xuemei, Zhang Nan, Zhang Lihai et al. (2025-09)
     Capillary Extrusion Rheometry for Characterising Wall Slip Behaviour in 3D Printed Concrete
410. Zhou Juanlan, Shi Xiangwen, Zheng Hongrun, Jin Ruoyu et al. (2025-09)
     Investigating the Effects of Hybrid PVA/BF Fibers in Low-Carbon 3D Printed Concrete with Recycled Aggregates:
     Rheology, Strength, and Anisotropy
411. Li Shuai, Corelli Jaide, Tran Jonathan, Fan Linhua (2025-09)
     3D Printable Cellulose Concrete:
     A Review and Pathway to Future Research
412. Rabul H., Prem Prabhat, Ravichandran Darssni, Rathan RT Arjun (2025-09)
     Development of Fly Ash and Limestone Calcined Clay-Based Mixtures for Concrete 3D Printing
413. Mansouri Abraham, Alsuwaidi Abdulla, Binali Alreem, Binshaqooi Essa et al. (2025-09)
     Conjugate Heat Transfer and U Value Analysis of 3D Concrete Printed Envelopes with Variable‐Thickness Air Cavities in Hot‐Arid Climates
414. Si Wen, Hopkins Ben, Khan Mehran, McNally Ciaran (2025-09)
     Towards Sustainable Mortar:
     Optimising Sika-Fiber Dosage in Ground Granulated Blast Furnace Slag and Silica Fume Blends for 3D Concrete Printing
415. Singh Amardeep, Yang Song, Wang Dianchao, Xiao Jianzhuang et al. (2025-09)
     Critical Threshold Fiber Content for Freeze-Thaw Resistance in 3D-Printed Concrete
416. Sun Hou-Qi, Zeng Jun-Jie, Xie Shan-Shan, Xia Jun-Run et al. (2025-09)
     Mechanical and Microstructural Characterization of Interlayer Bonding in Multi-Material 3D-Printed Concrete
417. Tarhan Yeşim, Atalay Berrin (2025-09)
     Phosphogypsum and Borogypsum as Additives for Sustainable and High-Performance 3D-Printable Concrete
418. Maroszek Marcin, Rudziewicz Magdalena, Rusin-Żurek Karina, Hager Izabela et al. (2025-09)
     Recycled Materials and Lightweight Insulating Additions to Mixtures for 3D Concrete Printing
419. Chen Baixi, Yang Lei, Jiang Sheng (2025-09)
     Stochastic Analysis of 3D Concrete Printing Process with Curvature and Inclination by Explainable Data-Driven Modelling
420. Yang Rijiao, Xu Chengji, You Xiufei, Li Xinze et al. (2025-09)
     Saddle Stitching-Enabled Interfacial Toughening in 3D Printed Concrete
421. Xu Bin, Sun Zhaoyang, Sun Ming, Chen Binmeng (2025-09)
     Realizing Rheological Manipulation by Adjusting Initiator Concentrations for In-Situ Polymerization:
     Towards 3D Concrete Printing Applications
422. Wang Li, Fan Haichen, Wang Qiang, Bai Gang et al. (2025-09)
     Design Method and Force Transmission Mechanism of 3D Printed Concrete Truss Beams Reinforced with 3D Conical Reinforcement
423. Elhag Ahmed, Mabrouk Abdelkader, Ghazouani Nejib, Nasir Umara (2025-09)
     Advances in Sustainable 3D-Printed Geopolymer Concrete:
     Materials, Performance, and Environmental Impact in Next Generation Green Construction
424. Tarhan İsmail, Tarhan Yeşim (2025-09)
     Nonlinear In-Plane Response of 3D-Printed Concrete Walls with Varied Infill Patterns:
     Experimental Mix Design and Numerical Structural Assessment
425. Mawas Karam, Maboudi Mehdi, Gerke Markus (2025-09)
     A Review on Geometry and Surface Inspection in 3D Concrete Printing
426. Chan Li-Jing, Padil Khairul, Chin Chee-Long, Ibrahim Izni et al. (2025-09)
     Strategies to Enhance Interlayer Bonding in 3D Printed Concrete:
     A Review
427. Ding Tao, Zhu Ruitao, Huang Zhangshuo (2025-09)
     Experimental Study on the Steel Fiber Orientational Distribution of Extrusion-Based 3D-Printed Ultra High-Performance Concrete
428. Liu Ruiqing, Du Hongjian (2025-09)
     Optimizing Thermal Insulation Through Geometric Design:
     Comparative Analysis of Normal and Lightweight 3D Printed Concrete Wall Patterns
429. Tian Xin, Shi Anqi, Fang Zhi, Lin Alexander (2025-09)
     Multi-Interface Effects on Mechanical Behavior in 3D-Printed Concrete Shear Keys:
     A Finite Element Modeling Strategy
430. Sabouni Reem, Martini Samer (2025-09)
     Characterization of 3D Printed Concrete Mixtures Developed Using Local UAE Materials Based on Rheological Properties
431. Luo Surong, Jin Wenhao, Zhang Zhaorui, Zhang Kaijian (2025-09)
     Constitutive Relationship of 3D Printed Fiber Reinforced Recycled Sand Concrete Under Uniaxial Compression
432. Liu Ruiying, Xiong Zhongming, Chen Xuan, Jia Qiong et al. (2025-09)
     Industrial Waste in 3D Printed Concrete:
     A Mechanistic Review on Rheological Control and Printability
433. Leong Wai (2025-09)
     Structural Optimization and Performance Evaluation of Spain's 3D-Printed Concrete Bridges Using AI-Based Design Approaches
434. Sikora Paweł (2025-09)
     Globally First 3D‐Printed Concrete Drinking Water Tank in Barczewko, Poland
435. Gencel Osman, Nodehi Mehrab, Subaşı Serkan, Ustaoğlu Abid et al. (2025-09)
     Properties of 3D Printed Concrete Containing Microencapsulated Phase Change Material
436. Jiang Youbau, Wen Jun, Gao Pengxiang, Liu Yan et al. (2025-09)
     Effect of Graphene Oxide on Physical and Mechanical Properties of 3D Printed Concrete
437. Arumugam Girirajan, Kusumo Camerlia May Li, Mari Tamil (2025-09)
     Impact of Bioinspired Infill Pattern on the Thermal and Energy Efficiency of 3D Concrete Printed Building Envelope
438. Sikora Paweł, Skibicki Szymon, Bielawski Jakub, Techman Mateusz et al. (2025-09)
     Elevated Temperature Response and Fire Resistance Considerations of 3D-Printed Concrete:
     Small- to Medium-Scale Wall Experiments
439. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun (2025-09)
     Development of Sustainable 3D Printing Concrete Materials:
     Impact of Natural Minerals and Wastes at High Replacement Ratios
440. Mousavi Moein, Rangaraju Prasad (2025-09)
     Freeze-Thaw Durability of 3D Printed Concrete:
     A Comprehensive Review of Mechanisms, Materials, and Testing Strategies
441. Li Fuhai, Xiao Sai, Yang Bo, Li Kepu et al. (2025-09)
     Mechanical Properties and Anisotropy of 3D-Printed Concrete Modified with Multiscale Materials Based on Optimized Printing Process Design
442. Chortis Alexandros, Gkountas Charalampos, Melidis Lazaros, Katakalos Konstantinos (2025-09)
     Seismic Performance Evaluation of 3D-Printed Concrete Walls Through Numerical Methods
443. Kubjana Lucy, Aigbavboa Clinton, Adekunle Peter (2025-09)
     Advancing Sustainable 3D-Printed Concrete:
     A Bibliometric Study on Financing Housing Options
444. Marco Giancarlo, Cheung Lok (2025-09)
     Multimodal Large Language Models for Adaptive 3D Concrete Printing:
     Real-Time Control of Materials and Settings According to Performance Requirements and Environmental Conditions
445. Marco Giancarlo, Lombardi Davide, Dounas Theodoros, Agkathidis Asterios (2025-09)
     A Theoretical Framework for the Standardisation and Industrialisation of 3D Concrete Printing Through Decentralised Science
446. Safanelli Nicollas, Schackow Adilson, Effting Carmeane, Matos Paulo (2025-09)
     The Effect of Crystalline Nanocellulose on the Rheology, Hydration of Cement Pastes, and Buildability of 3D-Printed Concrete
447. Lian Hongqian, Ding Tao (2025-09)
     Deformation of Inclined Concrete 3D Printing:
     A Computational Fluid Dynamics Analysis
448. Keller Petr, Mendřický Radomír (2025-09)
     Analysis of Object Deformations Printed by Additive Manufacturing from Concrete Mixtures over Time
449. Syed Sajid, Abid Khasim, Khan Majid (2025-09)
     An Interpretable Machine Learning Approach for Predicting Reinforcement Bond Performance in 3D Concrete Printing
450. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
     Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
     A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
451. Bai Gang, Wang Li, Li Zhijian, Qu Yao et al. (2025-09)
     Integrating Prestress into 3D Printed Ultra-High Performance Concrete Composite Beams for Superior Flexural Performance
452. Sahu Akshay, Sharma Deepak, Panda Biranchi (2025-09)
     Tailoring Topology-Optimized Lightweight Concrete Beam Design for Additive Manufacturing
453. Maurya Shubham, Kumar Vijay, Panda Biranchi, Borsaikia Arun et al. (2025-09)
     Inline Polymer Cable Reinforcement in 3D Concrete Printing with a Special Nozzle
454. Daungwilailuk Totsawat, Pheinsusom Phoonsak, Pansuk Withit (2025-09)
     Behavior of 3D Printed Concrete Walls Exposed to High Temperatures
455. Rabiei Mahsa, Moini Mohamadreza (2025-09)
     Extrusion Under Material Uncertainty with Pressure-Based Closed-Loop Feedback Control in Robotic Concrete Additive Manufacturing
456. Rahman S., Khair Sanjida, Shaikh Faiz, Sarker Prabir (2025-09)
     Decarbonized 3D Printed Concrete Incorporating Lithium Slag and PVA Fiber:
     Buildability, Mechanical, and Microstructural Insights
457. Barbhuiya Salim, Das Bibhuti, Adak Dibyendu (2025-09)
     Key Variables Influencing the Performance of 3D Printed Concrete:
     A Comprehensive Analysis
458. Shukla Bishnu, Bharti Gaurav, Parashar Bhupender, Sharma Pushpendra et al. (2025-09)
     Variables Influencing the Performance of 3D Concrete Printing for Sustainable Construction:
     Current Status and Future Prospects
459. Wang Xiaoqi, Liu Xing, Xu Yanling, Cao Jianfu et al. (2025-08)
     A General Adaptive Layer Height Continuous Path Planning Algorithm for Concrete 3D Printing of Complex Porous Structures Based on Multi-Objective Optimization and Reinforcement Learning
460. Liu Tong, Du Song, Teng Fei, Weng Yiwei (2025-08)
     Energy Consumption Modeling for a Robot Arm in 3D Concrete Printing
461. Yarlagadda Tejeswar, Zhang Zixin, Jiang Liming, Usmani Asif (2025-08)
     A Conceptual Model for Building Artistic and Geometrically Complex Building Envelopes Using Concrete 3D Printing
462. Quah Tan, Liu Zhixin, Tay Yi, Li Mingyang et al. (2025-08)
     In-Process Filament Repair in 3D Concrete Printing with Instance Segmentation
463. Liao Minmao, Gerong Wangdui, Wang Pengfei, Chen Zhaohui (2025-08)
     Determination of Elastic Engineering Constants in an Orthotropic Constitutive Model for Hardened 3D-Printed Concrete
464. Lyu Libo, Li Weihong, Deng Yongjie, Yu Qiuchun et al. (2025-08)
     Engineering Properties of Magnesium Phosphate Cement Lunar Soil Concrete Under Vacuum Conditions and Its 3D Printing Application for Lunar Dome Model
465. Mak Bunleang, Kim Tae, Dong Won-Jun, Shim Chang (2025-08)
     Crack Width Investigation of Reinforced Concrete Beam with 3D Concrete Printed Formwork Using Modified Parameters
466. Baritakis Mario, Traine Phillip, Granzow Jan, Döbert Christine (2025-08)
     3D-Printed Clay Formwork for Topology:
     Optimized Concrete Elements
467. Lin Yini, Yan Jiachuan, Sun Ming, Tang Boyang et al. (2025-08)
     Effects of Waste Glass Powder on Printability, Hydration and Microstructure of 3D Printing Concrete
468. Kiyani Muhammad, Hussain Syed, Emaan Rajja, Kamal Muhammad et al. (2025-08)
     Influence of Process Parameters on 3D Concrete Printing:
     A Step Towards Standardized Approaches
469. Yu Qian, Zhang Yamei, Pan Jinlong (2025-08)
     Multi-Scale Orthotropic Damage Constitutive Model for 3D Printed Concrete Informed by Pore Structure
470. Zhang Nan, Sanjayan Jay (2025-08)
     Concrete 3D Printing and Digital Fabrication Technologies for Bridge Construction
471. Mercimek Ömer, Şahin Oğuzhan, Çelik Alper, Ozkan Ekinci Mehmet et al. (2025-08)
     Structural Performance of Pre-Fabricated 3D Printed Concrete Walls:
     Effect of Cold Joint, Axial Load and Load Type
472. Si Wen, Carr Liam, Zia Asad, Khan Mehran et al. (2025-08)
     Advancing 3D Printable Concrete with Nanoclays:
     Rheological and Mechanical Insights for Construction Applications
473. Motiani Ronak, Sylvain Saha, Dalal Sejal, Vora Jay et al. (2025-08)
     Innovative Reinforcement Techniques for 3D-Printed Concrete:
     The Impact of Shape Memory Alloys on Flexural Strength and Crack Mitigation
474. Abid Khasim, Syed Sajid, Khan Majid (2025-08)
     Explainable Machine Learning-Based Model for Predicting Interlayer Bond Strength in 3D Printed Concrete
475. Dong Enlai, Jia Zijian, Rao Suduan, Jia Lutao et al. (2025-08)
     Fiber Alignment Mechanism in 3D-Printed Ultra-High Performance Concrete Based on Fluid Dynamics Theory
476. Dietrich Sebastian, Schneider Philip, Richter Christiane, Najian Asl Reza et al. (2025-08)
     Multi-Fidelity Structural Design for 3D Concrete Printing with Selective Paste Intrusion
477. Kumar Rohan, Das Nabodyuti, Nanthagopalan Prakash (2025-08)
     Novel Interlocking Nozzle Geometry for Enhanced Interlayer Strengthening in 3D Concrete Printing
478. Boddepalli Uday, Kandagaddala Revanth, Nanthagopalan Prakash (2025-08)
     Evaluation of Alkali-Activated Limestone Calcined Clay Mortars for 3D Concrete Printing Applications
479. Sapata Alise, Pluminss Ernests, Šlosbergs Pēteris, Šinka Māris (2025-08)
     Utilizing Construction Demolition Waste Aggregates in Cement- Free Concrete for 3D Printing
480. Lu Qianyang, Mei Song, Ateah Ali, Alsubeai Ali et al. (2025-08)
     Investigating the Strength Performance of 3D Printed Fiber-Reinforced Concrete Using Applicable Predictive Models
481. Aydin Tolga, Sandalci Ilgin, Aydin Eylül, Kara Burhan et al. (2025-08)
     Investigation of Bacterial Cells and Clays as Rheology Modifiers in 3D Concrete Printing
482. Xiao Yinan, Vandenberg Aileen, Lowke Dirk, Mai (née Dressler) Inka et al. (2025-08)
     Automated Robotic Assembly Planning of Space Trusses for Injection 3D Concrete Printing
483. Shilar Fatheali, Ganachari Sharanabasava, Osman N., Ramesh S. et al. (2025-08)
     Advancements in Fiber-Reinforced Geopolymer Along with 3D Printed and Nano Concrete in Sustainable Construction
484. Si Wen, Khan Mehran, McNally Ciaran (2025-08)
     Effect of Nano Silica with High Replacement of GGBS on Enhancing Mechanical Properties and Rheology of 3D Printed Concrete
485. Geng Shao-bo, Zhang Chen, Zhang Hui, Hai Lu et al. (2025-08)
     Upcycling Coal Gangue Coarse Aggregates into 3D Printed Concrete:
     Multi-Scale Mechanisms of Fracture Behaviour
486. Yang Xia, Wang Jiuyuan, Huang Han, Wu Gengchen et al. (2025-08)
     Anti-Washout Cement-Based Material for Under-Seawater 3D Concrete Printing:
     Design, Mechanical Properties and Microstructural Analysis
487. Miri Zahra, Aurilio R., Polak Maria, Baaj Hassan (2025-08)
     Interface Bonding in 3D-Printed Concrete:
     Experimental Evaluation and Numerical Modeling
488. Xiahou Xiaer, Ding Xingyuan, Yu Ke-Ke, Lu Cong (2025-08)
     From Waste to Strength:
     Sustainable Valorization of Modified Recycled PET Fibers for Rheological Control and Performance Enhancement in 3D Printed Concrete
489. İlerisoy Zeynep, Takva Çağatay, Top Semahat, Gökgöz Berru et al. (2025-08)
     The Effectiveness of 3D Concrete Printing Technology in Architectural Design:
     Different Corner-Wall Combinations in 3D Printed Elements and Geometric Form Configurations in Residential Buildings
490. Wang Suguo, Wang Xing, Yan Xueyuan, Chen Shanghong (2025-08)
     Effects of Aggregate Size and Nozzle Diameter on Printability and Mechanical Properties of 3D Printed Ferronickel Slag-GGBFS Concrete
491. Raza Muhammad, Besklubova Svetlana, Kravchenko Ekaterina, Zhong Ray (2025-07)
     Economic Viability of 3D Concrete Printing:
     A Comparative Study with Traditional Construction Method
492. Maboudi Mehdi, Mawas Karam, Gerke Markus (2025-07)
     Geometric Inspection in 3D Concrete Manufacturing:
     Comparison of Data Capturing Techniques
493. Iqbal Imtiaz, Besklubova Svetlana, Kasim Tala (2025-07)
     Assessment Framework for 3D Concrete Printing Technology in Alignment with Construction 5.0 Criteria
494. Kravchenko Ekaterina, Raza Muhammad, Besklubova Svetlana, Lazorenko Georgy (2025-07)
     Transforming Construction Waste into Resources for 3D Printed Concrete
495. Santhosh S., Raphael Benny, Santhanam Manu (2025-07)
     Exploration of Sustainable Beam Design Using Voronoi Patterns in Concrete 3D Printing
496. Chen Baixi, Qian Xiaoping (2025-07)
     Explainable Data-Driven Analysis of Uncertainty Propagation in 3D Concrete Printing via Adaptive Polynomial Chaos Expansion
497. Mesoudy Mouad, Rida Foulki, Driss Amegouz (2025-07)
     Addressing Geometrical and Dimensional Accuracy Challenges in 3D Concrete Printing
498. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Manalo Allan, Sanjayan Jay (2025-07)
     Rheological, Mechanical and Fire Resistance Performance of Waste Glass Activated Geopolymers for Concrete 3D Printing
499. Singh Amardeep, Anand Kamal, Liu Qiong, Tam Vivian et al. (2025-07)
     Enhancing Interlayer Bonding in 3D Printed Concrete Using Bacteria-Based Biomineralization
500. Panchal Priyanka, Choi Myoungsung (2025-07)
     A Review on Effect of Natural Fibers to Mitigate CO2 Footprint and Enhance Engineering Properties of 3D Printing Concrete
501. Yerikania Utami, Du Hongjian, Poh Leong (2025-07)
     A Comprehensive Experimental Investigation of Anisotropy Behavior on Highly Carbon-Minimized 3D Printed Concrete
502. Bayrak Alper, Shaban Nefize, Sarıtaş Afsin, Meral Akgul Cagla (2025-07)
     A Semi-Empirical Framework for Modeling Anisotropy, Spatial Variation and Failure Mechanisms in 3D Printed Concrete
503. Ravichandran Darssni, Prem Prabhat, Bhaskara Gollapalli, Maheswaran Srinivasan et al. (2025-07)
     Time-Dependent Properties of 3D Printable Plain and Fibered High Strength Concrete Incorporating Copper Slag as an Alternate Fine Aggregate
504. Zhang Chao, Ren Juanjuan, Zhang Shihao, Guo Yipu et al. (2025-07)
     Advanced Impact Resistance Design Through 3D-Printed Concrete Technology:
     Unleashing the Potential of Additive Manufacturing for Protective Structures
505. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-07)
     Ultrasonic Pulse Velocity for Real-Time Filament Quality Monitoring in 3D Concrete Printing Construction
506. Ingle Vaibhav, Prem Prabhat (2025-07)
     Acoustic Emission Examination of 3D Printed Ultra-High Performance Concrete with and Without Coarse Aggregate Under Fresh and Hardened States
507. Sahebi Soleyman, Aslani Farhad (2025-07)
     Mechanical Strength and Heat Tolerance of 3D Printed Rubberised Concrete at Elevated Temperatures
508. Ding Shengxuan, Li Jiren, Wang Mingqiang (2025-07)
     Study on Mechanical Properties of Composite Basalt Fiber 3D-Printed Concrete Based on 3D Meso-Structure
509. Goel Devansh, Kore Sudarshan (2025-07)
     Mapping the Bibliometric Progression of 3D Concrete Printing:
     A Concise Review
510. Dong Liang, Wu Chengqing, Liu Zhongxian, Wu Pengtao et al. (2025-07)
     Chloride Transport Anisotropy and Interfacial Degradation in 3D-Printed Ultra-High-Performance Concrete:
     Multi-Scale Evaluation and Engineering Implications
511. Cui Weijiu, Guo Ruyi, Liu Wenliang, Da Wan et al. (2025-07)
     Quality Assessment of 3D‐Printed Concrete Through Quantitative Visual Inspection
512. Yang Rijiao, Xu Chengji, Fang Sen, Li Xinze et al. (2025-07)
     Mechanistic Insights into Microstructural Changes Caused by Stapling in Extrusion-Based 3D Printed Concrete (3DPC)
513. Ding Tao, Dong Haining, Sikora Paweł, Lin Guan (2025-07)
     3D Printed Concrete Reinforced with Flexible Fiber Reinforced Polymer Strips or Grids:
     Concept and Bond Tests
514. Ma Jinyi, Zhang Haiyan, Wang Yanzhi, Xiong Lu et al. (2025-07)
     Effect of Clay Brick Powder and Recycled Fine Aggregates on Properties of 3D Printed Concrete After High Temperature Exposure
515. Chhabra Gulshan, Gupta Anjali, Bali Rajan, Tanwar Lovesh (2025-07)
     Advancing Sustainability in Construction:
     A Comprehensive Study on 3D-Printed Concrete Technologies
516. Saelens Lien, Tittelboom Kim, Wan-Wendner Roman, Caspeele Robby (2025-07)
     Experimental and Numerical Quantification of the Structural Capacity of Hybrid 3D Printed and Cast Concrete Beams After Topology Optimization
517. Mim Nusrat, Hosan Anwar, Shaikh Faiz, Sarker Prabir (2025-07)
     Rheological and Early Age Mechanical Properties of 3D Printed Concrete Containing Copper Heap Leach Residue as Fine Aggregate
518. Anop Darya, Sadenova Marzhan, Beisekenov Nail, Rudenko Olga et al. (2025-07)
     Additive Manufacturing as an Alternative to Core Sampling in Concrete Strength Assessment
519. Khare Karan, Khan Subim, Lal Dhirajkumar, Sonawane Pavankumar et al. (2025-07)
     Design and Development of a Nozzle Assembly for 3D Concrete Printing Applications
520. Rojas Jorge, Hasanzadeh Sognad (2025-07)
     Human Factor in 3D Concrete Printing for Construction
521. Mostert Jean-Pierre, Kruger Jacques (2025-07)
     Reducing Anisotropic Behaviour of 3D Printed Concrete Through Interlocked Filaments
522. Bradshaw James, Si Wen, Khan Mehran, McNally Ciaran (2025-07)
     Emerging Insights into the Durability of 3D-Printed Concrete:
     Recent Advances in Mix Design Parameters and Testing
523. Kaur Zinnia, Goyal Shweta, Kwatra Naveen, Bera Tarun (2025-07)
     Pore Structure Analysis and Durability Performance of Sustainable 3D Printed Concrete Incorporating Fly Ash and Limestone Calcined Clay Based Binders
524. Rizzieri Giacomo, Meni Simone, Cremonesi Massimiliano, Ferrara Liberato (2025-07)
     A Particle Finite Element Method for Investigating the Influence of Material and Process Parameters in 3D Concrete Printing
525. Šána Vladimír, Litoš Jiří (2025-07)
     Load-Bearing Capacity of the 3D Printed Concrete Structure Based on a Static Assessment and Load Test in Scale 1:1
526. Dong Wei, Zhang Changmin, Wang Junfeng, Zhang Xinjie et al. (2025-07)
     Optimal Design of Mix Proportions for 3D Printed Concrete with Ferrochrome Slag and Aeolian Sand
527. Liu Nana, Wang Jie (2025-07)
     Experimental Study on the Effect of Water-Binder Ratio on 3D Printing Form of Concrete Mortar
528. Ali Syed, Haq Mohd, Khan Rizwan, Hashmi Ahmad (2025-07)
     A Comprehensive Review on 3D Printing of Concrete:
     Materials, Methods and Mechanical Properties
529. Yang Jie, Xu Ke, He Haijie (2025-07)
     Materials, Performance Studies, and Application Progress of Fiber-Reinforced 3D-Printed Concrete
530. Popli Siddharth, Valikhah Fatemeh, Zandi Lak Erfan, Das Sreekanta (2025-07)
     Mechanical and Durability Performance of 3D-Printed Concrete with Coarse Aggregates and Cold Joints
531. Du Shizhao, Kang Chunxia, Du Xiuli (2025-06)
     Fatigue Performance of 3D Printed Reusable Concrete Slabs for Temporary Pavements
532. Zuo Zibo, Huang Yulin, Corte Wouter (2025-06)
     Real-Time Monitoring of Printed Concrete Weight During 3D Concrete Printing to Inversely Assess Process Stability:
     Indicators and Experiments
533. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-06)
     Multiphysics Modelling of 3D Concrete Printing:
     From Material Model to Process Simulation and Optimisation
534. Cui Weijiu, Ji Dongsheng, Shen Liang, Su Shiyong et al. (2025-06)
     A Neural Network-Based Model for Assessing 3D Printable Concrete Performance in Robotic Fabrication
535. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
     Enhancing the Mix Design in 3D Concrete Printing Through Systematic Optimization Process
536. Robens-Radermacher Annika, Kujath Cezary, Bos Freek, Mechtcherine Viktor et al. (2025-06)
     Design and Implementation of a Database System for Querying, Sharing, and Analyzing Experimental Data:
     Mechanical Properties of 3D Printed Concrete
537. Bos Freek, Menna Costantino, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
     Approach and Main Results:
     Mechanical Properties of 3D Printed Concrete
538. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
     Compressive Strength and Modulus of Elasticity:
     Mechanical Properties of 3D Printed Concrete
539. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
     Flexural and Tensile Strength:
     Mechanical Properties of 3D Printed Concrete
540. Huang Shuyi, Anton Ana-Maria, Dillenburger Benjamin, Xu Weiguo (2025-06)
     Lamella-Inspired 3D Concrete Printed Column-Slab System:
     Balancing Act for Productivity and Sustainability
541. Sakhare Vishakha, Khairnar Neha, Dahatonde Ulka, Mashalkar Shilpa (2025-06)
     Review on Sustainability in 3D Concrete Printing:
     Focus on Waste Utilization and Life Cycle Assessment
542. Versteege Jelle, Wolfs Robert, Salet Theo (2025-06)
     Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
     Part II: Moisture and Heat
543. Brandão Filipe, Figueiredo Bruno, Cruz Paulo (2025-06)
     Winding Fiber Thread for 3D Concrete Robotic Printing
544. Marco Giancarlo, Asta J. (2025-06)
     Neobrutalism:
     The Digital and Cultural Micro-Landscape of 3D-Printed Concrete
545. Haar Bjorn, Kruger Jacques, Zijl Gideon (2025-06)
     3D Printed Concrete Pinned Beam-Column Connection Development
546. Khodadadi Nima, Roghani Hossein, Caso Francisco, Kenawy El‐Sayed et al. (2025-06)
     Machine Learning Approach for the Flexural Strength of 3D‐Printed Fiber‐reinforced Concrete Based on the Meta‐heuristic Algorithm
547. Rousan Rajai, Alnemrawi Bara'a, Abdalla Khairedin, Awawdeh Najemaldeen et al. (2025-06)
     Mitigation of Energy Crisis Worldwide Using 3D-Printed Concrete with Phase Change Materials
548. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
     Advancing the Field of 3D Concrete Printing by Exploring the Use of Eco-Friendly Mortars
549. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
     Significance of Nozzle Parameters for 3D Printing of Concrete
550. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John (2025-06)
     Enhancing 3D Printed Concrete Through Waste Fly Ash:
     A Comprehensive Approach to Sustainable and Efficient Mix Design
551. Pour Arash, Farsangi Ehsan, Yang T., Li Shaofan et al. (2025-06)
     3D Printing of Conventional and Geopolymer Concretes:
     Advancements, Challenges, Future Directions, and Cost Analysis
552. Wijethunge Anjalee, Samarasinghe Don, Le An, Gajanayake Akvan et al. (2025-06)
     A Systematic Review on Sustainable 3D Concrete Printing:
     Opportunities and Challenges
553. Zhou Jimmy, Samarasinghe Don, Rotimi James, Feng Zhenan (2025-06)
     Exploring Policy Influences on the Adoption of 3D Concrete Printing Technology:
     A Hypothetical Model
554. Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-06)
     A Systematic Literature Review on the Thermal Behaviour of Building Elements Constructed Through 3D Concrete Printing (3DCP)
555. Oseji Samuel, Chukwuemeka Prince, Imoni Okes (2025-06)
     Artificial Intelligence in 3D Printed Concrete:
     Sustainability Assessment and Implementation Challenges
556. Ma Jiayue, Samarasinghe Don, Rotimi James, Zou Kelvin (2025-06)
     A Review of Supply Chain Dynamics of 3D Concrete Printing Construction Practice
557. Wang Xiaoqi, Zuo Tianyi, Xu Yanling, Liu Xing et al. (2025-06)
     Reinforcement Learning-Based Continuous Path Planning and Automated Concrete 3D Printing of Complex Hollow Components
558. Miranda Luiza, Lesage Karel, Schutter Geert, Roussel Nicolas (2025-06)
     Concrete Printing Through Lace Pressing:
     Head, Shoulders, Knees and Toes
559. Els Heinrich, Zijl Gideon, Villiers Wibke (2025-06)
     A Review of Shrinkage and Restrained Shrinkage Cracking in 3D Concrete Printing
560. Ding Shengxuan, Li Jiren, Liu Yiming (2025-06)
     Study on Mechanical Properties and Environmental Benefits of 3D Printed Lean Magnesium Ore Concrete Filled Columns Based on Three-Dimensional Meso-Structure
561. Ye Chengjie, Xu Jie, Lacidogna Giuseppe (2025-06)
     Fracture Behavior of 3D Printed Geopolymer Concrete Containing Waste Ceramic
562. Sun Hou-Qi, Zeng Jun-Jie, Zhuge Yan, Liu Yue (2025-06)
     3D Printed Functionally Graded Concrete Plates:
     Concept and Bending Tests
563. Ribeiro João, Campos Tatiana, Brandão Filipe, Figueiredo Bruno et al. (2025-06)
     3DCP Composite Systems:
     Additive Manufacturing of a Concrete and Cellulose Interlocking Wall
564. Shi Anqi, Lee Kah, Bo Sun, Koh Weng et al. (2025-06)
     Dimensional Effects on Shear Behaviour of 3D-Printed Concrete Shear Keys
565. Placzek Gerrit, Dahlberg Maike, Thormählen Jan, Schwerdtner Patrick (2025-06)
     How Productive Is 3D Concrete Printing?:
     A Systematic Review
566. Mansour Ali, Abou Khalil Amine, Khoury Hiam (2025-06)
     Toward Spatial and Cognitive Human-Robot Interaction:
     A Game-Based Simulation for Concrete 3D Printing in Construction
567. Hermida José, Saavedra Ruth, Hidalgo-Astudillo Samantha, Tošić Nikola et al. (2025-06)
     Influence of Fine Recycled Aggregates on the Properties of 3D Printing Concrete
568. Jendele Libor, Rymeš Jiří, Červenka Jan, Herzfeldt Michaela (2025-06)
     Time Dependent Modelling of Concrete for the Simulation of 3D Printing
569. Rajeev Pathmanathan, Nissanka Nilusha, Sanjayan Jay (2025-06)
     Experimental Study on Time-Dependent Pumping Behaviour of 3D Concrete Printing
570. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2025-06)
     Experimental Analysis of the Structural Behavior of Hybrid Concrete 3D Printed-Cast Beam Systems
571. Ewerz Johannes, Pfleger Marc-Patrick, Radl Elisabeth, Huber Patrick (2025-06)
     Concrete 3D Printing and Reinforcement:
     Determination of Bond Strength Through Pull-Out Tests
572. Galeote Eduardo, Claramunt Josep, Hermida José, Fuente Albert (2025-06)
     Influence of Fibers and Iron Dust on the Electrical Conductivity of 3D-Printed Concrete Mixes
573. Zuo Zibo, Huang Yulin, Tao Yaxin, Yong Yuan et al. (2025-06)
     Analysis of Factors Influencing the Maximum Continuous Printing Height of 3D Printed Concrete
574. Rajeev Pathmanathan, Kopitha Kirushnapillai, Sanjayan Jay (2025-06)
     Carbonated Water and MgO for Improved Performance of 3D Concrete Printing.
575. Radl Elisabeth, Pfleger Marc-Patrick, Sieh Alexander, Vill Markus (2025-06)
     Conceptual Design and Production of a 3D Printed Concrete Base Brick with Evaluation of Its Thermal Properties
576. García-Alvarado Rodrigo, García-Alvarado Rodrigo, Bunster Victor, Muñoz-Sanguinetti Claudia (2025-06)
     Additive Construction 4.0:
     A Systematic Review of 3D Concrete Printing for Construction 4.0
577. Lyu Xin, Ayough Pouria, Nawaz Waleed, Elchalakani Mohamed (2025-06)
     Development and Characterization of Printable Rubberised Ultra-High-Performance Concrete
578. Girskas Giedrius, Kligys Modestas (2025-06)
     3D Concrete Printing Review:
     Equipment, Materials, Mix Design, and Properties
579. Karamara Merve, Bogdanski Moritz-Ole, Zöller Raphael, Albrecht Sophie et al. (2025-06)
     Increasing Efficiency and Sustainability:
     A Comparative Analysis of Concrete 3D Printing and Traditional Methods Based on Case Studies
580. Sbardelotto Eduardo, Vieira Manuel, Ferreira dos Santos Karyne, Pereira dos Santos Samuel et al. (2025-06)
     Exploratory Study on the Rheological Behaviour of 3D Printable Mortars Incorporating Fine Recycled Concrete Aggregates (FRCA)
581. Lamb Bannon, Sabih Gauhar (2025-06)
     Advancements in 3D Concrete Printing Materials
582. Jalil Siti Nur Natasha Abdul, Rizal Alias Ahmad, Alias Aizat (2025-06)
     Challenges and Strategies in Implementing 3D Concrete Printing (3DCP) Technology in Malaysia:
     Materials and Design Codes
583. Senf Ferdinand, Javed Rezan, Funke Henrik, Gelbrich Sandra (2025-06)
     Enhanced Environmental Sustainability of 3D-Printed Concrete Mixtures Based on Calcium Sulfoaluminate (CSA) and Blast Furnace Cement (CEM III/B)
584. Musathik A., Ashfak M., Arif M., Samaraweera B. et al. (2025-06)
     Towards Smart Construction:
     Development of an Automated Small Scale 3D Concrete Printer
585. Li Long, Ji Weiyi, Xiao Jianzhuang, Xiao Jie et al. (2025-06)
     Strategy for Improving Buildability of 3D Printing Concrete Using CO2 Mixing and Chemical Admixtures
586. Mostert Jean-Pierre, Kruger Jacques (2025-06)
     Improving Shear and Flexural Performance of Macroscale 3D Printed Concrete Beams Through Filament Interlocking
587. Yao Jiaxu, Luo Jie, Qiu Minghong, Nagai Kohei (2025-06)
     Mesoscale Modeling of Anisotropic Compressive Behavior and Pull-Out Performance of 3D Printed Concrete with Steel Bars Using 3D RBSM
588. Duan Yuhang, Wang Chuan, Yin Binbin, Liew Kim (2025-06)
     Modeling Interfacial Failure in 3D-Printed Concrete via Peridynamics
589. Alizamir Meysam, Kim Sungwon, Ikram Rana, Ahmed Kaywan et al. (2025-06)
     A Reliable Hybrid Extreme Learning Machine-Metaheuristic Framework for Enhanced Strength Prediction of 3D-Printed Fiber-Reinforced Concrete
590. Si Wen, Khan Mehran, McNally Ciaran (2025-06)
     A Comprehensive Review of Rheological Dynamics and Process Parameters in 3D Concrete Printing
591. Pham Thi, Nguyen Thi, Huang Jie (2025-06)
     Experimental Study on Anisotropic Mechanical Properties of 3D Reinforced Concrete with Discrete Polyethylene Fibers
592. Cisowski Adam, Kowalik Michał (2025-06)
     The Influence of the Cross-Sectional Geometry on Stress Concentration in 3D Printed Concrete Elements:
     A Preliminary Study
593. Sonebi Mohammed, Kaushik Sandipan, Amziane Sofiane, Hamill Gerard (2025-06)
     Optimization of Rheological and Hardened Properties of 3D Concrete Printing
594. Ding Tao, Qu Changwei, Guo Dingming (2025-06)
     Thermal and Mechanical Properties of 3D Printed Functionally Graded Concrete:
     Utilizing Fibers and Recycled Aggregates as Gradient Components
595. Chen Qinbin, Barbat Gabriel, Cervera Miguel (2025-06)
     Finite Element Buildability Analysis of 3D Printed Concrete Including Failure by Elastic Buckling and Plastic Flow
596. Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng, Huang Zhongkai (2025-06)
     3D Printed Concrete Tunnel Lining:
     Comparative Study on Mechanical Properties of Curved and Straight Printed Specimens
597. Kumar S., Muthu Nelson, Panda Biranchi (2025-06)
     Numerical Investigation of Structural Behavior of 3D-Printed Concrete Walls:
     Insights from Damage Mechanics and Cohesive Zone Approaches
598. Zhang Ruo-Chen, Li Jiaxing, Liu Yiran, Huang Yimiao et al. (2025-06)
     Self-Healing Approach for Micro-Defects in 3D Printed Concrete:
     Microbial Community
599. Warsi Syed, Panda Biranchi, Biswas Pankaj (2025-06)
     Design of Earthquake-Resistant 3D Printed Concrete Wall Based on ACI 318-19:
     Analytical Investigation and Numerical Modelling
600. Lin Wenyu, Wang Li, Li Zhijian, Bai Gang et al. (2025-06)
     Multi-Scale Fabrication and Challenges in 3D Printing of Special -Shaped Concrete Structures
601. Hopkins Ben, Si Wen, Khan Mehran, McNally Ciaran (2025-06)
     Recent Advancements in Polypropylene Fiber-Reinforced 3D-Printed Concrete:
     Insights into Mix Ratios, Testing Procedures, and Material Behaviour
602. Makul Natt (2025-06)
     3D Concrete Printing
603. Kumar Sandeep, Kumar Abhishek, Pundir Aakanksha, Dwivedi Ashutosh et al. (2025-06)
     Low-Clay Soil as Fine Aggregate in 3D Printed Concrete:
     Insights into Fresh and Hardened Properties
604. Rojas Jorge, Hasanzadeh Sognad (2025-05)
     An Integrated BIM Planning Workflow for 3D Concrete Printing Projects
605. Trung Hieu Nguyen, Minh Trieu Nguyen, Dang Tri, Thinh Nguyen (2025-05)
     Advanced Sliding Mode Control Strategy for High-Performance 3D Concrete Printing
606. Kim Tae, Oh Sangwoo, Lee Jinsuk, Dong Won-Jun et al. (2025-05)
     Effects of 3D-Printed Concrete Permanent Formwork on the Flexural Behavior of Reinforced Concrete Beams:
     Experimental and Analytical Investigations
607. Wang Junsong, Ye Haoran, Sun Yating, Zhang Zixin et al. (2025-05)
     Integration of 3D Printed Fiber Concrete and OpenSeesTO for Enhanced Structural Design
608. Song Xinlei, Xu Quanbiao, Wang Hailong, Sun Xiaoyan et al. (2025-05)
     Flowability-Dependent Anisotropic Mechanical Properties of 3D Printing Concrete:
     Experimental and Theoretical Study
609. Fasihi Ali, Libre Nicolas (2025-05)
     Towards Accurate In-Situ Static Yield Stress Measurement for 3D Concrete Printing:
     A Study on Novel Fast Penetration Test
610. Geng Songyuan, Cheng Boyuan, Long Wujian, Luo Qiling et al. (2025-05)
     Co-Driven Physics and Machine Learning for Intelligent Control in High-Precision 3D Concrete Printing
611. Tao Yaxin, Zhang Yi, Mohan Manu, Dai Xiaodi et al. (2025-05)
     Waste-Derived Aggregates in 3D Printable Concrete:
     Current Insights and Future Perspectives
612. Mohamed Osama, Mishra Anamika, Isam Fida (2025-05)
     An Overview of 3D Printed Concrete for Building Structures:
     Material Properties, Sustainability, Future Opportunities, and Challenges
613. Bhowmik Anirban, Bhattacharjee Biswajoy, Sahu Prakash (2025-05)
     A Comprehensive Analysis on Material Properties and Specialized Applications in 3D Concrete Printing
614. Nayaka Ramesh, Kumar H., Sharif Ahamed, Zhang Y. (2025-05)
     Exploring Key Aspects and Sustainable Benefits of 3D Concrete Printing (3DCP):
     A Selective Review
615. Qi Pengfei, Wang Ziyuan, Yu Ruifang, Pei Qiang et al. (2025-05)
     Optimization Design and Regression Model Analysis of Mechanical Properties of 3D Printed Concrete
616. Yu Kun-Hao, Teng Teng, Nah So, Chai Hua et al. (2025-05)
     3D Concrete Printing of Triply Periodic Minimum Surfaces for Enhanced Carbon Capture and Storage
617. Sun Yuhang, Wang Haonan, Zhang Yi, Liu Xiongfei et al. (2025-05)
     Spray-Based 3D Printed Foam Concrete:
     Stress Concentration Relieve Utilization
618. Aly Ahmed Aly, Mantawy Islam (2025-05)
     Additive Construction of Low Embodied Carbon Concrete:
     Geopolymer Concrete
619. Sun Junbo, Aslani Farhad, Mann Dhruv, Huang Bo et al. (2025-05)
     Mechanical and Piezoresistive Behaviour of 3D Printed Self-Sensing One-Way Concrete Slab
620. Ding Tao, Peng Zechen, Dong Haining (2025-05)
     Mechanical Properties of CFRP Grid Reinforced 3D Printed Concrete Arch Structures
621. Raza Saim, Sakha Mahsa, Hassan Zohaib, Manshadi Behzad et al. (2025-05)
     Flexural Behavior of Stay-in-Place Load-Bearing 3D-Printed Concrete Formwork for Ribbed Slabs
622. Asaue Hisafumi, Shiotani Tomoki, Okude Nobuhiro, Ogura Hiroki et al. (2025-05)
     Clarification of Fracture Behaviour of RC Pillar with 3D Concrete Printing Buried Formwork Based on Elastic Wave Technique
623. Čítek David, Melter Oto, Hvizdal Ales, Auska Zuzana et al. (2025-05)
     Experimental 3D Printed Concrete Footbridge
624. Yamamoto Yujin, Kinomura Koji, Murata Satoshi, Asaue Hisafumi et al. (2025-05)
     Seismic Performance of RC Column Surrounded by 3D Printed Concrete Permanent Formwork with Short Fiber
625. Tang Boyang, Yan Jiachuan, Han Xiaoyu, Lin Yini et al. (2025-05)
     Mechanical Properties of Extrusion-Based 3D-Printed Concrete Considering the Thickness of the Printed Layer and Printing Time Interval
626. Mukhtar Faisal (2025-05)
     3D-Printed Concrete Fracture:
     Effects of Cohesive Laws, Mixes, and Print Parameters in 3D EXtended FEM
627. Ahadi Bahram, Valiente López María (2025-05)
     Zigzag Reinforcement Method for 3D Concrete Printing
628. Sarıkaya M., Benam Shaghayegh, Yılmaz Taner, Erkmen Bülent et al. (2025-05)
     Seismic Performance Assessment of 3D-Printed Concrete Structures
629. Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2025-05)
     Flexural Performance of Glass Fiber Textile Reinforced 3D Printed Concrete
630. Chippagiri Ravijanya, Lanjewar Bhagyashri, Kamath Muralidhar, Ralegaonkar Rahul (2025-05)
     Prediction of Construction Materials for Conventional and Alkali-Activated 3D Concrete Printing
631. Salifu N., Bassuoni Mohamed, Guven Gursans (2025-05)
     Performance Evaluation of Limestone-Blended Cement and Cellulose Nanomaterials in 3D Concrete Printing
632. Liu Qiong, Singh Amardeep, Wang Qiming, Qifeng Lyu (2025-05)
     3D-Printed Application in Concretes
633. Asif Usama (2025-05)
     Comparative Analysis of Evolutionary Computational Methods for Predicting Mechanical Properties of Fiber-Reinforced 3D Printed Concrete
634. Santhosh S., Raphael Benny, Santhanam Manu (2025-05)
     Concrete 3D Printing of Shape-Optimized Lattice Beams Incorporating Nature-Inspired Patterns
635. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhang Yunsheng et al. (2025-05)
     Rheological Performance Regulation and Material Optimization of Manufactured Sand Concrete in 3D Printing
636. Liu Wenliang, Ji Dongsheng, Cui Weijiu, Shi Xinyu et al. (2025-05)
     Research Progress on Quality Control Method of Concrete 3D Printing Based on Computer Vision
637. Zhang Bo, Tao Yaxin, Zhang Yi, Shields Yasmina et al. (2025-05)
     Mechanical Properties of 3D Printed Concrete with 2D Infill Patterns Including Print Path Crossings
638. Yang Shutong, Chen Zhengyuan, Lan Tian, Yang Tiange (2025-05)
     Quantitative Evaluation for Fracture Properties of 3D Printed Ultra-High-Performance Concrete Loaded in Different Directions
639. Jaji Mustapha, Babafemi Adewumi, Zijl Gideon (2025-05)
     Mechanical Performance of Extrusion-Based Two-Part 3D-Printed Geopolymer Concrete:
     A Review of Advances in Laboratory and Real-Scale Construction Projects
640. Görtzen Tom, Neef Tobias, Scheffler Philipp, Macek Domen et al. (2025-05)
     3D Concrete Printing of Topological Interlocking Blocks
641. Gribonval Alice, Pierre Maxime, Ducoulombier Nicolas, Sab Karam et al. (2025-05)
     Multi-Physics Modelling of 3D-Printed Concrete Evolution in Environmental Conditions
642. Chen Zhaohui, Yue Ziyi, Gerong Wangdui, Wang Zhenyue et al. (2025-05)
     Effect of Orthotropy and Printing Patterns on the Bending Performance of 3D Printed Concrete Grid Components
643. Lucen Hao, Hanxiong Lyu, Huanghua Zhang, Shipeng Zhang et al. (2025-05)
     Development of CO2-Activated Interface Enhancer to Improve the Interlayer Properties of 3D-Printed Concrete
644. Safal K., Liu Han, Lopes Sousa Israel, Laflamme Simon et al. (2025-05)
     Investigation of 3D Printed Concrete for Real-Time Monitoring of Additive Manufacturing Process
645. Demirbaş Ali, Tuğluca Merve, Şahin Oğuzhan, İlcan Hüseyin et al. (2025-05)
     A Comprehensive Study on the Valorization of Recycled Concrete Aggregates in 3D-Printable Cementitious Systems
646. Aminpour Nima, Memari Ali (2025-05)
     Development of EPS Light‐weight Concrete for 3D Printing
647. Luo Xiaoyu, Zhao Yuqi, Yao Xiaofei, Zou Cunjun et al. (2025-05)
     3D Printing Concrete Interface Treatment Based on Physical and Chemical Methods:
     A Review
648. Zahabizadeh Behzad, Pereira João, Pereira Eduardo, Cunha Vítor (2025-05)
     Self-Healing Assessment of Fiber Reinforced Cementitious Mortars Developed for 3D Concrete Printing:
     Recovery of Mechanical Performance and Self-Sealing Capability
649. Gantner Stefan, Rennen Philipp, Amiri Fatemeh, Rothe Tom et al. (2025-05)
     Robotic Frame Winding:
     Prefabricated Fiber Structures as Formwork and Reinforcement for Digitally Fabricated Shell-Like Concrete Elements
650. Kuang Hao, Deng Yang, Wang Dong, Jian Shouwei et al. (2025-05)
     Strengthening Effect of In-Situ Sprayed UV-Curable Polyurethane-Acrylate Resin Coating on Slag-Based 3D Printing Concrete
651. Sapata Alise, Šinka Māris, Puzule Līga, Plūmiņš Ernests et al. (2025-05)
     Developing Low-CO₂ 3D-Printable Concrete with Waste Ash and Recycled Aggregates
652. Liang Yingming, He Jincheng, Niu Like, Chen Junwei et al. (2025-05)
     Experimental Study on Printability of Solid Waste Concrete Based on 3D Printing Technology
653. Wang Guihua, Zhou Jiguo, Liu Haoyun, Zhang Jianming (2025-05)
     Rheological Properties and Mechanical Durability of 3D-Printed Concrete Based on Low-Field NMR
654. Liu Xingzi, Xu Jie, Dobrzanski James, Kolawole John et al. (2025-05)
     Factors Affecting the Flexural Performance of Reinforced 3D Printed Concrete Beams
655. Khanverdi Mohsen, Das Sreekanta (2025-05)
     Performance of Full-Scale 3D-Printed Concrete Walls:
     Effects of Vertical Reinforcements and Window Opening
656. Das B., Prathap Y., Sandeep Ankit, Vaghamshi Keval et al. (2025-05)
     Reviewing the Materials Selection, Rheology, Durability, and Microstructural Characteristics of 3D Printed Concrete
657. Chandra Jimmy, Halim Alvin, Budiman Franky, Pudjisuryadi Pamuda et al. (2025-05)
     Experimental Study of Bond Strength of Embedded Steel Reinforcement in Vibration-Based 3D Printed Concrete Mortar
658. Mishra Sanjeet, Snehal K., Das B., Chandrasekaran Rajasekaran et al. (2025-05)
     From Printing to Performance:
     A Review on 3D Concrete Printing Processes, Materials, and Life Cycle Assessment
659. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi et al. (2025-05)
     Modelling of 3D Concrete Printing Based on SPH Method with the Herschel-Bulkley-Papanastasiou Rheology Model
660. Zhang Bo, Corte Wouter, Ooms Ticho, Wan-Wendner Roman (2025-05)
     Mechanical Properties of Particle-Bed 3D Printed Concrete Infill Patterns
661. Kaya Ebru, Ciza Baraka, Yalçınkaya Çağlar, Felekoğlu Burak et al. (2025-05)
     A Comparative Study on the Effectiveness of Fly Ash and Blast Furnace Slag as Partial Cement Substitution in 3D Printable Concrete
662. An Dong, Rahman Mahfuzur, Zhang Y., Yang Chunhui (2025-05)
     Effects of Key 3D Concrete Printing Process Parameters on Layer Shape:
     Experimental Study and Smooth Particle Hydrodynamics Modelling
663. Hashimoto Katsufumi, Nakase Kota, Yoshihara Rei, Honda Yoshiki et al. (2025-04)
     Evaluation and Investigation of Material and Mechanical Property of 3D Printed Concrete by Means of Non-Destructive Testing Methods
664. Mishra Jyotirmoy, Babafemi Adewumi, Combrinck Riaan (2025-04)
     Limitations and Research Priorities in 3D-Printed Geopolymer Concrete:
     A Perspective Contribution
665. Zuo Zibo, Tao Yaxin, Huang Yulin, Zhang Longlong et al. (2025-04)
     Real-Time Temperature Monitoring to Evaluate the Strength Evolution of 3D Printed Concrete:
     From Lab to In-Situ Printing
666. Dabbaghisouraki Farshad, Tanhadoust Amin, Nehdi Moncef (2025-04)
     Fiber Reinforcement Strategies in 3D Concrete Printing:
     Addressing Challenges and Identifying Research Gaps
667. Wu Changzhong, Zhu Xingyu, Wu Liang, An Haibo et al. (2025-04)
     Design and Simulation Analysis of the Extrusion Device of Concrete 3D Printing Device
668. Thajeel Marwah, Kopecskó Katalin, Balázs György (2025-04)
     Enhancing Printability of 3D Printed Concrete by Using Metakaolin and Silica Fume
669. Xia Kailun, Chen Yuning, Chen Yu, Jia Lutao et al. (2025-04)
     Programmable Toughening for 3D Printed Concrete and Architected Cementitious Materials
670. An Ning, Wang Huai, Wang Peijun, Xu Chuanhua et al. (2025-04)
     Tension-Compression Anisotropic Cohesion Model for the Interlayer Interface of 3D-Printed Concrete Compression Specimens
671. Hu Xiangcheng, Shazad Qamar, Li Fangyuan (2025-04)
     Influence of the Shear Span Ratio on the Shear Performance of 3D-Printed Concrete Beams Without Web Reinforcement
672. Casanova Euro, Hidalgo Nelson, Valdebenito Michael, Forcael Eric et al. (2025-04)
     Overturning Resistance of Concrete Curved Walls Manufactured with Additive Construction
673. Hasani Alireza, Besharatian Boshra, Dorafshan Sattar (2025-04)
     Additively Constructed Plain Concrete Pipes:
     Structural Performance and Site Implementation
674. Hua Hao, Liu Yizhuo, Hovestadt Ludger, He Siyuan et al. (2025-04)
     Digital Nervi:
     Performance‐based Design of Lightweight Isostatic Ribbed Slab with 3D Printed Concrete Formwork
675. Si Qi, Zhang Wenna, Pan Zhihong, Zheng Jianqiang et al. (2025-04)
     Study on the Mechanical and Durability Properties of 3D-Printed Bamboo Fiber-Reinforced Concrete
676. Qiao Zhigang, Li Hui, Wang Fei, Qi Yongle et al. (2025-04)
     Optimizing Thermal Energy Storage in 3D Printed Concrete with Hollow Ceramsite Composite Phase Change Materials
677. Zhao Herui, Jiang Quan, Xia Yong, Hou Dongqi et al. (2025-04)
     Microbial-Induced Calcareous Precipitation Effect on Tensile Strength and Early Age Shrinkage of 3D Printed Concrete
678. Gao Jianhao, Niu Yujun, Wang Chaofeng (2025-04)
     Linear Helical Printing:
     A Novel Approach to 3D Printing Concrete Structures with Enhanced Integrity
679. Zhang Qiuju, Li Yujia, Huang Yuefan, Li Yangbo et al. (2025-04)
     Utilizing 3D Printing and Distributed Optic Fiber to Achieve Temperature-Sensitive Concrete
680. Cao Xiangpeng, Cui Hongzhi (2025-04)
     Simple Floor Nail Placement Technique to Reinforce 3D-Printed Concrete:
     An Experimental Investigation
681. Shen Jianyu, Ye Taohua, Xiao Jianzhuang, Li Shuisheng (2025-04)
     Mechanical and Thermal Properties of 3D Printed Earth Concrete Solidified by Geopolymers:
     A Study of Utilizing Excavated Clay
682. Berawi Mohammed, Sari Mustika, Bakri Helty, Miraj Perdana et al. (2025-04)
     3D Printing Technology for Precast Concrete:
     A Business Process Perspective from Indonesian Construction Sector
683. Zhou Jimmy, Samarasinghe Don, Rotimi James, Feng Zhenan (2025-04)
     Examining Global Policy Influences on the Adoption of 3D Concrete Printing Technology:
     A Roadmap for New Zealand
684. Xiong Baocheng, Liu Huanbao, Nie Ping, Li Xiaoxi et al. (2025-04)
     Effect of Different Surface Modification Methods of Small Particle Size Recycled Rubber Powder on Mechanical Properties of 3D Printed Concrete
685. Dobrzanski James, Xu Jie, Bartek Rasti, Becker Daniel et al. (2025-04)
     From Digital Crafting to Digital Manufacturing:
     Automated Production Using Hybrid 3D Concrete Printing
686. Rudziewicz Magdalena, Hutyra Adam, Maroszek Marcin, Korniejenko Kinga et al. (2025-04)
     3D-Printed Lightweight Foamed Concrete with Dispersed Reinforcement
687. Zhou Biao, Zhou Hongru, Yoshioka Hideki, Noguchi Takafumi et al. (2025-04)
     Mechanical and Microstructure Evolution of 3D Printed Concrete Interlayer at Elevated Temperatures
688. Ghodke Swapnil, Chowdhury Shubhankar, Singh Bhupinder (2025-04)
     Characterising Flexural Behaviour of Coarse Aggregate-Based 3D Printed Concrete Beams Using Acoustic Emission Technique
689. Kompella Sriram, Levi Marinella, Ferrara Liberato (2025-04)
     Identifying Interlayer Fracture Properties in 3D Printed Concrete Specimens via Multidirectional Flexural Tests
690. Ayhan Bahar, Irizarry Elmer, Lale Erol, Yu Ke et al. (2025-04)
     Numerical Simulation of 3D Printed Ultra High-Performance Concrete Using the Lattice Discrete Particle Model
691. He Shan, Luković Mladena, Schlangen Erik (2025-04)
     Self-Healing Strain-Hardening Concrete Cover
692. Kunieda Minoru, To Shunya, Kato Tatsuyoshi, Miyajima Akira (2025-04)
     Failure Behavior of RC Beams by Means of 3D Concrete Printing
693. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-04)
     Multiphysics Modelling for 3D Concrete Printing:
     From Printability to Hardened Properties
694. Sørensen Jesper, Stang Henrik (2025-04)
     Experimental Investigation of the Fatigue Behavior of 3D Printed Steel Fiber Reinforced Concrete
695. Teng Fei, Ye Junhong, Yu Jie, Weng Yiwei (2025-04)
     Multi-Material Printing to Simultaneously Enhance Interlayer and Flexural Performance in 3D Concrete Printing
696. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
     Synergistic Potential of Topology Optimization and Lattice Structures in Concrete 3D Printed Beams
697. Jia Lutao, Dong Enlai, Xia Kailun, Niu Geng et al. (2025-04)
     Initial Plastic Shrinkage of 3D-Printed Concrete Incorporating Recycled Brick Fine Aggregates:
     Insights from Water Transport and Structural Evolution
698. Cavalcante Tiago, Toledo Filho Romildo, Mendoza Reales Oscar (2025-04)
     Rheological and Environmental Implications of Recycled Concrete Powder as Filler in Concrete 3D Printing
699. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
     Effect of Nozzle Stand-Off Distance, Printing Interval, and Inclusion of Glass Fiber Mesh Reinforcement in 3D Printed Concrete
700. Liu Qiong, Wang Qiming, Sun Chang, Singh Amardeep et al. (2025-04)
     Compressive Performance and Damage Evolution of Concrete Short Columns with Shell-Filling Structure Confined by Continuous Fiber Reinforced 3D Printed Mortar
701. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2025-04)
     Novel Strategy for Enhancing Rheological Properties and Interlayer Bonding in Underwater 3D Concrete Printing
702. Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
     Optimizing 3D Geopolymer Concrete for Sustainable Construction:
     A Review of Material Selection, Printing Methods, and Properties
703. Zhu Jinggao, Cervera Miguel, Ren Xiaodan (2025-04)
     Peridynamic Anisotropic Behavior Analysis of 3D-Printed Concrete Structures
704. Liu Chuanbei, Zou Mengtong, Chen Xuemei, Deng Yongjun et al. (2025-04)
     Feasibility Study of 3D-Printed Rubberized Concrete as a Permanent Formwork:
     Mechanical Properties, Interlayer Interface and Durability
705. Lin Yuxin, Bayramvand Alireza, Meibodi Mania (2025-04)
     Towards Lightweight Structure:
     Coupling Topology Optimization with Non-Planar 3D Concrete Printing
706. Benros Deborah, Hashemi Arman, Yunsheng Su, Callaghan Carl (2025-04)
     Robotic Micro-House:
     Experience with 3D Concrete Printing for Housing Construction
707. Shi Ye, Han Li, Wu Pengtao, Dai Kaichao et al. (2025-04)
     Design of 3D Printing Green Ultra-High Performance Concrete Based on Binder System Optimization
708. Zhang Ziqi, Pan Tinghong, Guoa Rongxin, Lin Runsheng et al. (2025-04)
     Simulation and Analysis of Material Stacking and Migration Induced by Extrusion Behavior in 3D Printed Concrete
709. Aman Abdulkerim, Yang Zhe, Xin Yubo, Zhang Xiaoman et al. (2025-04)
     Introducing Magnesium Oxide into 3D Printed Concrete to Mitigate Dry-Shrinkage
710. Zhang Yuying, Zhu Xiaohong, Li Muduo, Zhang Chao et al. (2025-04)
     3D Printing Technology in Concrete Construction
711. Liu Xiongfei, Yang Xiaojie, Sun Yuhang (2025-04)
     Synchronous Construction of Spray-Based 3D Printed Reinforced Concrete Structure:
     Effect of 2.5D Rebar Structure on the Flexural Performance of Slab
712. Tseng Kuo-Chang, Chi Maochieh, Yeih Weichung, Huang Ran (2025-04)
     Influence of Slag/Fly Ash as Partial Cement Replacement on Printability and Mechanical Properties of 3D-Printed Concrete
713. Xiao Yinan, Hack Norman, Kloft Harald, Lowke Dirk et al. (2025-03)
     Constraint-Based Form-Finding of Space Trusses for Injection 3D Concrete Printing Through Vector-Based Graphic Statics
714. Tran Mien, Le Thanh, Cao Nguyen, Nguyen Thi (2025-03)
     Sustainable Prospect for Entire Replacement of River Sand with Recycled Glass Aggregate in 3D Printing Concrete:
     Rheological Properties, Printability, and Alkali-Silica Reaction
715. Liu Chao, Li Xin, Wu Yiwen, Liu Huawei et al. (2025-03)
     Impact of External Loading on the Time-Dependent Evolution of 3D Printed Concrete with Recycled Sand in the Green State
716. Mim Nusrat, Shaikh Faiz, Sarker Prabir (2025-03)
     Sustainable 3D Printed Concrete Incorporating Alternative Fine Aggregates:
     A Review
717. Mansouri Abraham, Wolde Japi, Joda Akram (2025-03)
     The Potential of Sand as a Sustainable Infill for 3D Concrete Printed Building Walls
718. Rajczakowska Magdalena (2025-03)
     Trends in Bio-Based 3D Concrete Printing:
     An NLP-Driven Analysis
719. Gulati Hemant, Lu Tianxing (2025-03)
     Customized 3D Printable Concrete:
     A Systematic Review of Challenges, Methodologies, and Adoption Strategies
720. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
     Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods
721. Yang Kun, Yuan Jingbo, Wang Yibo, Yang Fan et al. (2025-03)
     Optimization of 3D Printing Nozzle Structure and the Influence of Process Parameters on the Forming Performance of Underwater Concrete
722. Mesnil Romain, Rosa Pedro, Demont Léo (2025-03)
     Thickness Optimisation in 3D Printed Concrete Structures
723. Vargas José, Westerlind Helena, Breseghello Luca, Silfwerbrand Johan (2025-03)
     Design of Porous Structures in 3D Concrete Printing Using Procedural Print Patterns
724. Liu Chao, Liang Zhan, Liu Huawei, Wu Yiwen et al. (2025-03)
     Seismic Performance of 3D Printed Reinforced Concrete Walls:
     Experimental Study and Numerical Simulation
725. Xia Kailun, Chen Yuning, Zhang Zedi, Wang Wei et al. (2025-03)
     In-Situ Crosslinked Nano-SiO2 Reinforced Alginate Bio-Textile for Mitigating Plastic Shrinkage in 3D Printed Concrete
726. Li Hualong, Shi Ye, Rong Hui, Dai Kaichao (2025-03)
     Effect of Additives on the Performance of 3D-Printing Ultra-High Performance Concrete
727. Hlobil Michal, Michel Luca, Pundir Mohit, Kammer David (2025-03)
     A Thermo-Hygro Model to Determine the Factors Dictating Cold Joint Formation in 3D Printed Concrete
728. Chen Wei, Pan Jinlong, Zhu Binrong, Han Jinsheng et al. (2025-03)
     Nonlinear Predictive Modeling of Building Rates Incorporating Filament Compression Deformations in 3D Printed Geopolymer Concrete
729. Zat Tuani, Schuster Sílvio, Schmitt Duarte Ester, Freitas Daudt Natália et al. (2025-03)
     Rheological Properties of High-Performance Concrete Reinforced with Microfibers and Their Effects on 3D Printing Process
730. Yuan Yong, Sheng Ruyi, Yao Xupeng, Pichler Bernhard et al. (2025-03)
     A Three-Step Development Strategy for 3D Printable Concrete Containing Coarse Aggregates
731. Dey Dhrutiman, Panda Biranchi, Shukla Yash, Rawal Rajan (2025-03)
     A Comprehensive Assessment of Thermal Performance of 3D Printed Concrete Lattice Walls
732. Ur Rehman Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-03)
     Systematic Literature Review of the Evaluation of the Thermal Conductivity of 3D Concrete Printed Building Elements
733. Wang Qiang, Yang Wenwei, Wang Li, Bai Gang et al. (2025-03)
     Reinforcement Design and Structural Performance for the Topology Optimized 3D Printed Concrete Truss Beams
734. Zuo Zibo, Zhang Yamei, Li Jin, Huang Yulin et al. (2025-03)
     Systematic Workflow for Digital Design and On-Site 3D Printing of Large Concrete Structures:
     A Case Study of a Full-Size Two-Story Building
735. Miri Zahra, Baaj Hassan, Polak Maria (2025-03)
     3D-Printed Concrete Bridges:
     Material, Design, Construction, and Reinforcement
736. Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
     The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
737. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2025-03)
     Investigating Shrinkage and Mechanical Properties of 3D Printed Concretes Under Different Curing Conditions
738. Suphunsaeng Kantawich, Prasittisopin Lapyote, Pethrung Sirichai, Pansuk Withit (2025-03)
     Fire Performance Evaluation of 3D-Printed Concrete Walls:
     A Combined Full-Scale and Numerical Modeling Approach
739. Özalp Abdulkadir, Aldemir Alper (2025-03)
     Artificial Intelligence-Based Displacement Capacity Prediction Tool for Three-Dimensional Printed Concrete Walls
740. Li Yuhan, Rian Iasef, Chen Hanmei, Tang Shu (2025-03)
     Application of Fractal Curves for 3D Concrete Printing of Porous Prefab Panels
741. Şahin Hatice, Kaya Yahya, Akgümüş Fatih, Mardani Naz et al. (2025-03)
     Degradation of Mechanical Properties of 3D Fiber Reinforced Printed Concrete Mixtures Exposed to Elevated Temperatures
742. Kuang Weifeng, Pavlenko Petro, Guo Haoyu, Tian Kuo et al. (2025-03)
     Utilization of Machine-Made Sand Waste in 3D-Printed Ecological Concrete for Artificial Reefs
743. Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wu Fei et al. (2025-03)
     Automated Analysis System for Micro-Defects in 3D Printed Concrete
744. Jiang Youbau, Liu Yan, Zhang Zupan, Gao Pengxiang et al. (2025-03)
     Tensile Performance of Interlayer Interface of Interlocking 3D Printed Concrete with Single Toothlike Nozzle
745. Sikora Paweł, Skibicki Szymon, Chougan Mehdi, Szewczyk Piotr et al. (2025-03)
     Silica-Coated Admixtures of Bismuth and Gadolinium Oxides for 3D Printed Concrete Applications:
     Rheology, Hydration, Strength, Microstructure, and Radiation Shielding Perspective
746. Skripkiūnas Gintautas, Tolegenova Aigerim, Rishko Lyudmyla, Akmalaiuly Kenzhebek et al. (2025-03)
     Durability and Cracking Defects in 3D-Printed Concrete
747. Shahzad Qamar, Li Fangyuan (2025-03)
     Influence of Concrete Interfaces on the Damage and Pull-Out Behavior of 3D-Printed Concrete Structures
748. Sharma Shivam, Tahlawi M., Delavar Mohammad, Sideris Petros (2025-03)
     Structural Design Methodology for Low-Rise 3D Printed Concrete (3DPC) Buildings Subjected to Non-Seismic Loading:
     Description, Application and Validation
749. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2025-02)
     Effect of Air-Entraining Agent on Hardened Properties of 3D Printed Concrete with Emphasis on Permeability and Air Void Structure
750. Zhang Bo, Zhang Yi, Ye Yihang, Hao Lulu et al. (2025-02)
     Influence of Contacts in 2D Infill Patterns on Mechanical Properties of 3D Printed Concrete Structures
751. Ramirez Rodriguez Fatima, Pancho Paolo, Sanchez Daniela, Poudel Suman et al. (2025-02)
     Design and Development of a Lean Robotic Cell for Concrete 3D Printing
752. Salaimanimagudam M., Jayaprakash Jaganathan, Anwar Mohammed (2025-02)
     Selection of Reinforcement Incorporation Method for 3D Printed Concrete Using MCDM
753. Vasilić Ksenija (2025-02)
     Standardization Aspects of Concrete 3D Printing
754. Liu Chao, Liu Huawei, Wu Yiwen, Wu Jian et al. (2025-02)
     Effect of X-Ray CT Characterized Pore Structure on the Freeze-Thaw Resistance of 3D Printed Concrete with Recycled Coarse Aggregate
755. Mortada Youssef, Hammoud Ahmad, Masoud Laith, Wyrzykowski Mateusz et al. (2025-02)
     3D Printable Ca(OH)2-Based Geopolymer Concrete with Steel Fiber Reinforcement
756. Kolawole John, Buswell Richard, Mahmood Sultan, Isa Muhammed et al. (2025-02)
     On the Origins of Anisotropy of Extrusion-Based 3D Printed Concrete:
     The Roles of Filament Skin and Agglomeration
757. Yuan Yong, Fatoyinbo Imoleayo, Sheng Ruiyi, Wang Qiling et al. (2025-02)
     Advancing the Applicability of Recycled Municipal Solid Waste Incineration Bottom Ash as a Cement Substitute in Printable Concrete:
     Emphasis on Rheological and Microstructural Properties
758. Mengistu Girum, Nemes Rita (2025-02)
     Evaluating the Performance of Recycled Aggregate Concrete Incorporating 3D-Printed Concrete Waste as Aggregate Using the Rebound Hammer Test
759. Liu Xiongfei, Li Chuang, Guo Pei, Wang Li et al. (2025-02)
     Spray-Based 3D Printed Tunnel Slag Concrete:
     Evaluation for Printability and Mechanical Performance
760. Cui Weijiu, Liu Wenliang, Guo Ruyi, Da Wan et al. (2025-02)
     Geometrical Quality Inspection in 3D Concrete Printing Using AI-Assisted Computer Vision
761. Versteege Jelle, Wolfs Robert, Salet Theo (2025-02)
     Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
     Part I: Geometry
762. Liu Qiang, Jiang Quan, Zhao Herui, Yu Yang et al. (2025-02)
     Porous Diatomite Promotes Lightweight and Low-Carbon Concrete 3D Printing:
     An Exploratory Study
763. Park Ji-seul, Jeong Seung-Su, Hong Seungkee, Lee Seohyung et al. (2025-02)
     Mechanical Modeling for Prediction of Structural Stability of Cylindrical Structures During 3D Concrete Printing
764. Akkoyun Furkan, Günal Ayse (2025-02)
     The State of 3D Concrete Printing:
     Current Applications and Future Opportunities
765. Sangiorgio Valentino, Bianchi Iacopo, Forcellese Archimede (2025-02)
     Advancing Decarbonization Through 3D Printed Concrete Formworks:
     LIFE Cycle Analysis of Technologies, Materials, and Processes
766. Zeng Jun-Jie, Sun Hou-Qi, Deng Run-Bin, Yan Zitong et al. (2025-02)
     Bond Performance Between FRP-Bars and 3D-Printed High-Performance Concrete
767. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Korat Bensa Lidija et al. (2025-02)
     Establishing Benchmark Properties for 3D-Printed Concrete:
     A Study of Printability, Strength, and Durability
768. Zhao Hongyu, Wang Xiangyu, Chen Zhaohui, Liu Xianda et al. (2025-02)
     Microcrack Investigations of 3D Printing Concrete Using Multiple Transformer Networks
769. Engel Sven, Hegger Josef, Claßen Martin (2025-02)
     Multimodal Automated Fabrication with Concrete:
     Case-Study and Structural Performance of Ribbed CFRP-Reinforced Concrete Ceiling
770. Gurunandan M., Nedunuri Aparna, Tanwar Jayant, Nanthagopalan Prakash et al. (2025-02)
     Development of 3D-Printable Alkali-Activated GGBFS and Fly-Ash-Binder-Based Mortars with Concrete-Demolition-Waste as Aggregates
771. Chourasia Ajay, Pal Biswajit, Kapoor Ashish (2025-02)
     Influence of Printing Direction and Interlayer Printing Time on the Bond Characteristics and Hardened Mechanical Properties of Agro-Industrial Waste-Based 3D Printed Concrete
772. An Xuehui, Liang Qimin, Li Pengfei, You Wei et al. (2025-02)
     Experimental Assessment on Printing Performance and Mechanical Properties of Underwater Self-Protecting 3D Printing Concrete
773. Senthilnathan Shanmugaraj, Raphael Benny (2025-02)
     Predicting Buildability Using the Surface Texture of 3D Printed Concrete Elements
774. Manny Agemar, Dehn Frank (2025-02)
     Basics of 3D Printing in Concrete Construction:
     Recommendations for Practice
775. Rudziewicz Magdalena, Maroszek Marcin, Hutyra Adam, Góra Michał et al. (2025-02)
     Influence of Foaming Agents and Stabilizers on Porosity in 3D Printed Foamed Concrete
776. Zhi Yefan, Chai Hua, Teng Teng, Akbarzadeh Masoud (2025-02)
     Automated Toolpath Design of 3D Concrete Printing Structural Components
777. Ivaniuk Egor, Pukhkaiev Dmytro, Reichle Mathias, Zhao Wanqi et al. (2025-01)
     Robotic Assembly of Modular Concrete Shells Using Falsework
778. Alós Shepherd David, Dehn Frank, Kuhn Alexander, Degen Robin et al. (2025-01)
     3D Concrete Printing of Solid Wall Cross-Sections with Truckmounted Concrete Pump:
     A Report on the First Printed Structure in Germany
779. Wu Changzhong, Lu Yuanyuan, Tian Jiaxin, Zhu Xingyu et al. (2025-01)
     Research on 3D Printed Section of Concrete Based on Robot Arm and Structural Design of Sprinkler Head
780. Xia Zhenjiang, Geng Jian, Zhou Zhijie, Liu Genjin (2025-01)
     Comparative Analysis of Polypropylene, Basalt, and Steel Fibers in 3D Printed Concrete:
     Effects on Flowability, Printabiliy, Rheology, and Mechanical Performance
781. Kumar Soni Ashish, Anil Sangwai Keyur, Panda Biranchi (2025-01)
     In-Process Monitoring and Quality-Assessment of 3D Concrete Printing Process
782. Pepe Marco, Lombardi Rosario, Lima Carmine, Paolillo Bruno et al. (2025-01)
     Experimental Evidence on the Possible Use of Fine Concrete and Brick Recycled Aggregates for 3D Printed Cement-Based Mixtures
783. Chen Wei, Guan Yongying, Zhu Binrong, Han Jinsheng et al. (2025-01)
     Influence of Extruded Strip-Shape and Dimension on the Mechanical Properties and Pore-Characteristics of 3D Printed Geopolymer Concrete
784. Ambily Parukutty, Kaliyavaradhan Senthil, Sebastian Shilpa, Shekar Deepadharshan (2025-01)
     Sustainable 3D Printable Concrete-Mix Using Copper-Slag
785. Zhong Jianjun, Lyu Libo, Deng Yongjie, Ma Haiyan et al. (2025-01)
     An Evaluation-Method for the Printability of Magnesium-Phosphate-Cement Concrete for Integrated Mixing-Stirring-Extrusion Rapid 3D Printing
786. Wang Hailong, Shen Wenbin, Sun Xiaoyan, Song Xinlei et al. (2025-01)
     Influences of Particle-Size on the Performance of 3D Printed Coarse Aggregate Concrete:
     Experiment, Microstructure, and Mechanism Analysis
787. Ahn Eunjong, Han Seongho, Shin Myoungsu, Khayat Kamal et al. (2025-01)
     Novel Method to Evaluate 3D Printed Concrete Quality Using Ultrasonic Scatter-Energy-Techniques
788. Guan Jingyuan, Wang Li, Wan Qian, Ma Guowei (2025-01)
     Material and Structural Fatigue-Performance of 18m Span Reinforced Arch Structure Manufactured by 3D Printing Concrete as Permanent Formwork
789. Zhang Tianjie, Wang Donglei, Lu Yang (2025-01)
     A Navier-Stokes-Informed Neural Network for Simulating the Flow-Behavior of Flowable Cement-Paste in 3D Concrete Printing
790. Çapunaman Özgüç, Farrokhsiar Paniz, Bilén Sven, Duarte José et al. (2025-01)
     Vision-Based Sensing and Digital Twin-Technologies in Conformal 3D Concrete Printing:
     Exploring Operational Accuracy, Adaptability, and Scalability, and Investigating Monitoring-Capabilities in Large-Scale Applications
791. Kuzmenko Kateryna, Roux Charlotte, Féraille Adélaïde (2025-01)
     Environmental Impact of 3D Concrete Printing
792. Perrot Arnaud, Jacquet Yohan (2025-01)
     3D Concrete Printing by Extrusion and Filament-Deposition
793. Perrot Arnaud, Jacquet Yohan, Amziane Sofiane (2025-01)
     3D Concrete Printing
794. Oulkhir Fatima, Rihani Nadir, Akhrif Iatimad, Jai Mostapha (2025-01)
     Integration of Earth-Based Materials in 3D Concrete Printing:
     Physico-Chemical and Technological Characterization
795. Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
     Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
     From Material-Design to Structural Bearing-Capacity-Assessment
796. Sun Junbo, Wang Yufei, Yang Xin, Wang Haihong et al. (2025-01)
     Red Mud Utilization in Fiber-Reinforced 3D Printed Concrete:
     Mechanical Properties and Environmental Impact Analysis
797. Shazad Qamar, Li Fangyuan (2025-01)
     Interfacial Bond-Effects on Shear-Strength and Damage in 3D Printed Concrete Structures:
     A Combined Experimental and Numerical Study
798. Zhang Yonghong, Cui Suping, Yang Bohao, Wang Xinxin et al. (2025-01)
     Research on 3D Printing Concrete Mechanical Properties-Prediction-Model Based on Machine-Learning
799. Hägle Marius, Stöhr Ben, Stark Alexander (2025-01)
     Increasing the Accuracy of Concrete Surfaces Through Robotic Milling
800. Chen Meng, Li Jiahui, Zhang Tong, Zhang Mingzhong (2025-01)
     3D Printability of Recycled Steel-Fiber-Reinforced Ultra-High-Performance Concrete
801. Hanžič Lucija, Štefančič Mateja, Šter Katarina, Zalar Serjun Vesna et al. (2025-01)
     Collision Milling of Oil Shale Ash as Constituent Pretreatment in Concrete 3D Printing
802. Licciardello Lucia, Soto Alejandro, Kaufmann Walter, Metelli Giovanni (2025-01)
     Determining the Strength of 3D Printed Concrete with the Modified Slant-Shear-Test
803. Elango K., Saravanakumar R., Vivek D., Yuvaraj S. et al. (2025-01)
     A Critical Review of Fresh, Hardened and Durability Properties of 3D Printing Concrete
804. Vysochinskiy Dmitry, Madsen Gunnar, Lande Ingrid (2025-01)
     An Experimental Study of Consistency and Strength Variation of 3D Printed Concrete Mixes
805. Zhang Yonghong, Cui Suping, Wang Xinxin, Yang Bohao et al. (2025-01)
     Microstructure and Performance of Recycled Wind Turbine Blade-Based 3D Printed Concrete
806. Lyu Qifeng, Wang Yalun, Chen Dongjian, Liu Shiyuan et al. (2025-01)
     Energy Storage Properties and Mechanical Strengths of 3D Printed Porous Concrete Structural Supercapacitors Reinforced by Electrodes Made of Carbon-Black-Coated Ni Foam
807. Shahzad Qamar, Li Fangyuan (2025-01)
     Impact of Concrete Interfaces on the Mechanical Performance of 3D Printed Concrete Structures
808. Lolli Francesca, Mehlomakulu Bungane, Monkman Sean (2025-01)
     Case Study of 3D Printed Concrete as Compared to Conventional Construction:
     Structural Comparison and Life Cycle Carbon Assessment
809. Obermeier Nico, Richter Christiane, Wiese Felix, Stengel Thorsten (2025-01)
     Low Global-Warming-Potential and Resource-Efficient 3D Printing Cement-Based Concrete
810. Nan Bo, Qiao Youxin, Leng Junjie, Bai Yikui (2025-01)
     Advancing Structural Reinforcement in 3D Printed Concrete:
     Current Methods, Challenges, and Innovations
811. Hassan Amer, Alomayri Thamer, Noaman Mohammed, Zhang Chunwei (2025-01)
     3D Printed Concrete for Sustainable Construction:
     A Review of Mechanical Properties and Environmental Impact
812. Richter Christiane, Maurer Christian, Jungwirth Jörg (2025-01)
     Reinforcement-Strategies for Additively Manufactured Concrete Elements:
     Exploring the Potential of Different Reinforcement-Materials for Selective Cement-Activation
813. Souza Eduarda, Rodrigues e Silva Rafaela, Ribeiro Borges Paulo (2025-01)
     Overburden Materials from the Iron Mining as Raw Materials for AAM:
     Preliminary Assessment of Mixes for 3D Concrete Printing
814. Schossler Rodrigo, Ullah Shafi, Alajlan Zaid, Yu Xiong (2025-01)
     Data-Driven Analysis in 3D Concrete Printing:
     Predicting and Optimizing Construction Mixtures
815. Sun Hou-Qi, Zeng Jun-Jie, Hong Guang-Yao, Zhuge Yan et al. (2025-01)
     3D Printed Functionally Graded Concrete Plates:
     Concept and Bending Behavior
816. Omur Tarik, Akpunar Ahmet, Bingöl Ayşe, Oktay Büşra et al. (2025-01)
     The Influence of Phase-Change-Material Filled Three-Dimensional Printed Artificial Aggregates on the Properties of Blast-Furnace-Slag Based Alkali-Activated Concrete
817. Jiang Youbau, Gao Pengxiang, Adhikari Sondipon, Yao Xiaofei et al. (2024-12)
     Studies on the Mechanical Properties of Inter-Layer Interlocking 3D Printed Concrete Based on a Novel Nozzle
818. Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-12)
     An Eco-Friendly Ultra-High-Performance Geopolymer Concrete with Quaternary Binders for 3D Printing
819. Raqeb Hanan, Ghaffar Seyed (2024-12)
     3D Concrete Printing in Kuwait:
     Stakeholder Insights for Sustainable Waste Management Solutions
820. Mousavi Moein, Bengar Habib, Mousavi Fateme, Mahdavinia Pooneh et al. (2024-12)
     Inter-Layer Bond Strength Prediction of 3D Printable Concrete Using Artificial Neural Network:
     Experimental and Modeling Study
821. Wang Hailong, Shen Junyi, Sun Xiaoyan, Dong Weiwei et al. (2024-12)
     Numerical Investigation on Shear Behavior of Reinforced Concrete Beam with 3D Printed Concrete Permanent Formwork
822. Yabanigül Meryem, Özer Derya (2024-12)
     Exploring Architectural Units Through Robotic 3D Concrete Printing of Space-Filling Geometries
823. Kopitha Kirushnapillai, Rajeev Pathmanathan, Sanjayan Jay, Elakneswaran Yogarajah (2024-12)
     CO2 Sequestration and Low-Carbon-Strategies in 3D Printed Concrete
824. Huang Junxiang, Peng Zeqin, Tan Xianzhong, Gong Guofang et al. (2024-12)
     Mechanism Analysis of the Magnetic Field-Assisted 3D Printed Steel-Fiber-Reinforced Concrete
825. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-12)
     Influence of the Nozzle Geometry on Mechanical Properties of 3D Printed Concrete:
     Experiment and Finite Element Study
826. Dey Dhrutiman, Kumar Gaurav, Prasad Ventrapragada, Panda Biranchi (2024-12)
     Experimental Investigation of Thermal Performance of 3D Printed Slab Infused with Lightweight Concrete as Insulation
827. Aminpour Nima, Memari Ali (2024-12)
     Analysis of Anisotropic Behavior in 3D Concrete Printing for Mechanical Property Evaluation
828. Tarhan Yeşim, Şahin Remzi (2024-12)
     The Impact of Air-Entraining on Frost-Endurance in 3D Printed Concrete:
     The Function of Printing Orientation and Curing Process
829. Latha P., Shanmugavelu V., Tamilmani A., Thayalnayaki D. et al. (2024-12)
     Evaluating 3D Concrete Printing Effectiveness Through a Comparative Study Using SVM, Decision Trees, and Random Forest Techniques
830. Glotz Theresa, Rasehorn Inken, Petryna Yuri (2024-12)
     Mechanical Behavior of Hardened Printed Concrete and the Effect of Cold Joints:
     An Experimental Investigation
831. Bahoria Boskey, Bhagat Rajesh, Pande Prashant, Raut Jayant et al. (2024-12)
     Design-Optimization of 3D Printed Concrete Elements Considering Life Cycle Assessment and Life Cycle Costing
832. Zhang Yu, Yu Zhengxing, Zhang Yunsheng, Zhang Jiufu et al. (2024-12)
     Study on the Predictive Model for Continuous Build-Height of 3D Printed Concrete Based on Printability and Early Mechanical Properties
833. Neef Tobias, Kalthoff Matthias, Müller Steffen, Cruz Cynthia et al. (2024-12)
     Mineral-Impregnated Carbon-Fibers-Reinforcement for Concrete Elements Manufactured by Extrusion
834. Maroszek Marcin, Rudziewicz Magdalena, Hutyra Adam, Dziura Paweł et al. (2024-12)
     Evaluation of 3D Concrete Printing Extrusion-Efficiency
835. Li Shuai, Khieu Hai, Black Jay, Nguyen Hung-Xuan et al. (2024-12)
     Two-Scale 3D Printed Steel-Fiber-Reinforcements-Strategy for Concrete Structures
836. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-12)
     Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing Technology:
     Corrigendum
837. Cao Xiangpeng, Wu Shuoli, Cui Hongzhi (2024-12)
     Experimental Study on In-Situ Mesh Fabrication for Reinforcing 3D Printed Concrete
838. Du Longyu, Zhou Jiehang, Lai Jianzhong, Yin Xuexiang et al. (2024-12)
     Dynamic Damage Behavior and Anisotropic Mechanism of 3D Printed Reinforced Concrete Subjected to Penetration
839. Zhao Hongyu, Sun Junbo, Wang Xiangyu, Wang Yufei et al. (2024-12)
     Real-Time and High-Accuracy Defect Monitoring for 3D Concrete Printing Using Transformer Networks
840. Zuo Zibo, Tao Yaxin, Corte Wouter (2024-12)
     Experimental Research of Concrete Temperature-Distribution During Large-Scale On-Site 3D Printing Based on Infrared-Thermal-Imaging
841. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Yu Kequan (2024-12)
     Interfacial Bond-Properties Between 3D Printed Engineered Cementitious Composite and Post-Cast Concrete
842. Mohammed Arafat, Tamimi Adil, Abdwais Ahmed (2024-12)
     Structural Performance of 3D Concrete Printed Load-Bearing Walls
843. Li Fangyuan, Hu Xiangcheng, Shahzad Qamar (2024-12)
     Anisotropic Behavior in 3D Printed Concrete:
     Finite Element Simulation Approach
844. Forcael Eric, Alucema Contreras Elena, Burkart Medina Adolfo, García-Alvarado Rodrigo et al. (2024-12)
     Comparative Study of Visual Programming Procedures for 3D Concrete Printing of Different Geometric Shapes
845. Hass Lauri, Bos Freek, Salet Theo (2024-12)
     Bond Governed Interactions Between Helical Reinforcement and 3D Printed Concrete
846. Zhou Longfei, Gou Mifeng, Zhang Haibo, Hama Yukio (2024-12)
     Investigation of Activated Bauxite-Tailings for Application in 3D Printed Concrete via a Modified Anderson and Anderson-Model
847. Guan Jingyuan, Wang Li, Huang Yimiao, Ma Guowei (2024-12)
     3D Printed Concrete Composite Slabs Fabricated by Pre-Stressed Reinforced Permanent Formwork:
     Design, Manufacturing, and Performance
848. Irshidat Mohammad, Cabibihan John-John, Fadli Fodil, Ramahi Siraj et al. (2024-12)
     Waste Materials Utilization in 3D Printable Concrete for Sustainable Construction Applications:
     A Review
849. Zhao Hongyu, Jassmi Hamad, Liu Xianda, Wang Yufei et al. (2024-12)
     Artificial Intelligence-Based Microcracks Research in 3D Printing Concrete
850. Cruz Cynthia, Bosbach Sven, Kalthoff Matthias, Beckmann Birgit et al. (2024-12)
     Material-Minimized Rib and Honeycomb Slabs Made of Extruded Carbon-Reinforced Concrete Webs
851. Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
     Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
     Materials, Engineered Properties and Techniques for Additive Manufacturing
852. Santos da Mata Gomes Daniela, Rocutan Melina, Pereira Lucas, Motezuki Fabio et al. (2024-12)
     Simulation of 3D Concrete Printing Using an Implicit Formulation of the Moving Particle Semi-Implicit Method
853. Andrade Rodrigo, Mendoza Reales Oscar, Carvalho Gonzaga e Silva Ana, Fairbairn Eduardo et al. (2024-12)
     Thermal Behavior of Air-Fluid in Triangular Cavities of 3D Printed Concrete Walls
854. Avancini Victor, Quintana-Ruiz Osvaldo, Campello Eduardo (2024-12)
     Assessing 3D Printed Concrete Process Parameters Through Discrete Element Modeling
855. Nunes Lavynia, Miranda Freitas Juan Oliveira, Abud Vilanova João, Rubin Ariane (2024-12)
     Comparative Analysis of the Construction Feasibility of Special Works of Art Using 3D Concrete Printing, Prefabricated Concrete, and Cast In-Situ
856. Navarrete Iván, Tošić Nikola, Hermida José, Saavedra Ruth et al. (2024-12)
     3D Printed Concrete as a Source of Recycled Aggregates:
     Potential for Multi-Recycling and CO2 Sequestration
857. Liu Huawei, Wang Yifei, Zhu Chao, Wu Yiwen et al. (2024-11)
     Design of 3D Printed Concrete Masonry for Wall Structures:
     Mechanical Behavior and Strength Calculation Methods Under Various Loads
858. Huang Bo, Ge Yutian, Wang Xiangyu, Wang Yufei et al. (2024-11)
     Recycled Ceramic-Brick-Powder Utilization in Fiber-Reinforced 3D Printing Concrete:
     An Eco-Friendly Substitute to Conventional Fine Aggregates
859. Şahin Hatice, Akarsu Özenç Aliye, Saka Dinç Zaide, Mardani Ali et al. (2024-11)
     Investigation of Fresh and Hardened Properties of 3D Printable Concrete Containing Ozone-Modified Carbon-Fiber
860. Wang Lei, Nerella Venkatesh, Li Dianmo, Zhang Yuying et al. (2024-11)
     Biochar-Augmented Climate-Positive 3D Printable Concrete
861. Rasel Risul, Hossain Md, Zubayer Md, Zhang Chaoqun (2024-11)
     Exploring the Fresh and Rheology Properties of 3D Printed Concrete with Fiber-Reinforced Composites:
     A Novel Approach Using Machine Learning Techniques
862. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
     Structural Analysis of 3D Printed Concrete Walls Under Quasi-Static Cyclic Loading Using Composite Micro-Model
863. Jin Willy, Caron Jean-François, Ouellet-Plamondon Claudiane (2024-11)
     Minimizing the Carbon Footprint of 3D Printing Concrete:
     Leveraging Parametric LCA and Neural Networks Through Multi-Objective-Optimization
864. Lu Haoyu, Zhang Lizhi, Wang Junkai, Shi Zhaoxin et al. (2024-11)
     Penetration-Test of Sheet-Like Indenter for Yield-Stress-Assessment of 3D Printed Concrete
865. Sikora Paweł, Rathnarajan Sundar, Federowicz Karol, Techman Mateusz et al. (2024-11)
     Use of Seawater as an Accelerator in 3D Printed Concrete
866. Kaya Ebru, Ciza Baraka, Yalçınkaya Çağlar, Felekoğlu Burak et al. (2024-11)
     Effect of Hydroxypropyl-Methylcellulose and Aggregate Volume on Fresh and Hardened Properties of 3D Printable Concrete
867. Luo Surong, Jin Wenhao, Wu Weihong, Zhang Kaijian (2024-11)
     Rheological and Mechanical Properties of Polyformaldehyde-Fiber-Reinforced 3D Printed High-Strength Concrete with the Addition of Fly-Ash
868. Wu Mushuang, Wang Zixiao, Chen Yuxuan, Zhu Mengyu et al. (2024-11)
     Effect of Steel-Slag on Rheological and Mechanical Properties of Sulfoaluminate-Cement-Based Sustainable 3D Printing Concrete
869. Demont Léo, Bono Victor, Ducoulombier Nicolas, Mesnil Romain et al. (2024-11)
     Anisotropic Concrete:
     A Composite Look on the Engineering and Architecture of Concrete Construction
870. Gomaa Shady, Irizarry Elmer, Ahmed Ayesha, Rosa Raul et al. (2024-11)
     3D Printing of Ultra-High-Performance Concrete:
     Shape Stability for Various Printing Systems
871. Han Xiaoyu, Yan Jiachuan, Huo Yanlin, Chen Tiefeng (2024-11)
     Effect of Carbonation-Curing-Regime on 3D Printed Concrete:
     Compressive Strength, CO2 Uptake, and Characterization
872. Günzel F., Moelich Gerrit, Kanyenze Simba, Kruger Jacques et al. (2024-11)
     Investigating Inherent Cement Setting Mechanisms to Improve the Constructability Performance of Extrusion-Based 3D Concrete Printing
873. Jørgensen Henrik, Hansen Steen, Jespersen Esra, Florenzano Daniele et al. (2024-11)
     Experimental Investigation of Key Structural Parameters for Structural Design of 3D Printed Concrete
874. Taleb Maria, Bulteel David, Montagne Alex, Roudet Francine et al. (2024-11)
     Influence of Thermo-Hygrometric Conditions on the Interface Bond in 3D Printed Concrete
875. Lin Yuxin, Meibodi Mania (2024-11)
     Integrated Sensing Printhead:
     In-line Data Collection for Non-Planar 3D Concrete Printing
876. Ding Yahong, Tong Jiaqi, Zhang Meixiang, Guo Shuqi et al. (2024-11)
     Effect of Aggregate Gradation on the Properties of 3D Printed Recycled Coarse Aggregate Concrete
877. Habibi Alireza, Buswell Richard, Osmani Mohamed, Aziminezhad Mohamadmahdi (2024-11)
     Sustainability Principles in 3D Concrete Printing:
     Analysing Trends, Classifying Strategies, and Future Directions
878. Sabra Tarek, Ohno Motohiro, Kurihara Ryota, Kinomura Koji et al. (2024-11)
     Analytical Investigation on the Structural Performance of RC Column with 3D Printed Concrete Permanent Formwork
879. Rajeev Pathmanathan, Sanjayan Jay (2024-11)
     Current Developments in the Application of Extrusion-Based 3D Concrete Printing
880. Vaishali Panneer, Varunkumar P. (2024-11)
     Experimental Study on Behavior of Cement Concrete in 3d Printing
881. Swelim Wafaey (2024-11)
     Is 3D Printed Concrete a Game Changer?!
882. Kruger Jacques, Zijl Gideon (2024-11)
     A Structural Engineering Perspective on Extrusion-Based 3D Concrete Printing:
     From Green to Solid State
883. Menna Costantino (2024-11)
     Seismic Performance of Large-Scale 3D Printed Concrete Panels:
     An Experimental and Analytical Study
884. Loporcaro Giuseppe, Scott Allan, Clucas Don, Palermo Alessandro et al. (2024-11)
     Sustainable Resilience for 3D Concrete Printed Homes in New Zealand:
     A Three Years Research Government Funding Overview
885. Rothe Tom, Gantner Stefan, Hack Norman, Hühne Christian (2024-11)
     Characterisation of the Alkaline-Resistance of Fiber-Reinforcement Strands Produced in a Dynamic Fiber Winding Process for 3D Concrete Printing
886. Rymeš Jiří, Červenka Jan, Jendele Libor, Bureš Vladislav et al. (2024-11)
     Integrating 3D Modelling and Non-Linear Numerical Simulations in Concrete Additive Manufacturing
887. Reddy Swami, Shariff Najeeb, Nanthagopalan Prakash (2024-11)
     Topology-Optimization of 3D Concrete Printed Columns Considering Material-Anisotropy
888. Wang Li, Lin Wenyu, Wan Qian, Li Zhijian et al. (2024-11)
     Manufacturing Accuracy Improvement of Concrete Product by Hybrid Additive-Subtractive Method Based on the Time-Dependent Characteristics of Cementitious Materials
889. Takva Çağatay, Top Semahat, Gökgöz Berru, Gebel Şeyma et al. (2024-11)
     Applicability of 3D Concrete Printing Technology in Building Construction with Different Architectural Design Decisions in Housing
890. Najvani Mohammad, Murcia Daniel, Taha Mahmoud (2024-11)
     Evolution of Early-Age Mechanical and Failure Behavior of 3D Printed Polymer Concrete
891. Kaszyńska Maria, Skibicki Szymon (2024-11)
     Sustainable Development Approach for 3D Concrete Printing
892. Mousavi Seyed, Ahmadi Khatereh, Dehestani Mehdi (2024-11)
     Fire Response of 3D Printed Concrete
893. Hassan Zohaib, Raza Saim, Shafei Behrouz, Mahoutian Mehrdad et al. (2024-11)
     Innovations to Improve 3D Concrete Printing of Portland Cement-Steel-Slag Blended Mortars
894. Raza Saim, Sakha Mahsa, Manshadi Behzad, Fan Haifeng et al. (2024-11)
     Digital Fabrication of Ribbed Slabs with Post-Tensioned 3D Printed Concrete Formwork
895. Murali Gunasekaran, Leong Sing (2024-11)
     Waste-Driven Construction:
     A State of the Art Review on the Integration of Waste in 3D Printed Concrete in Recent Researches for Sustainable Development
896. He Yuxiang, Robens-Radermacher Annika, Noda Sakiko, Wolf Christoph et al. (2024-11)
     Automated Workflows for Concrete Additive Manufacturing for Design, Optimization, and Fabrication of Parametrized Elements
897. Soave Francesco, Muciaccia Giovanni, Ferrara Liberato (2024-11)
     An Indirect Methodology to Evaluate the Rheological Properties of a Digitally Fabricated Concrete Incorporating Corrosion Inhibitors
898. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
     Development of Ultra-Ductile Strain-Hardening 3D Printed Concrete Composite Utilizing Critical Fiber Volume and Coarse Aggregate
899. Sreenivas Gagan, Rizzieri Giacomo, Bhattacherjee Shantanu, Jain Smrati et al. (2024-11)
     Experimental and Numerical Assessment of Layer Deformation in a 3D Printed Concrete Element
900. Arif Muhammad, Jan Faizullah, Rezzoug Aïssa, Afridi Muhammad et al. (2024-11)
     Data-Driven Models for Predicting Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Interpretable Machine Learning Algorithms
901. Csótár Hanna, Baranyai Gusztáv, Szalai Szabolcs, Fischer Szabolcs (2024-11)
     Sustainable Uses of 3D Printing Applied to Concrete Structures
902. Wan Linxiaoyi, Liu Jingyang, Bard Joshua, Cupkova Dana (2024-11)
     Towards Adaptive Additive Manufacturing:
     Image-Based Monitoring for Binder Jet 3D Printing of Coarse Composite Concrete Powders
903. Khan Muhammad, Varadharajan Tharanesh, Keller Zachary, Meibodi Mania (2024-11)
     BioMatters:
     The Robotic 3D-Printed Biodegradable Wood-Based Formwork for Cast-in-Place Concrete Structures
904. Anton Ana-Maria, Skevaki Eleni, Bischof Patrick, Reiter Lex et al. (2024-11)
     Column-Slab Interfaces for 3D Concrete Printing:
     Design, Fabrication and Assembly Strategies
905. Sun Yubo, Zhang Xinyue, Zhou Jiangang, Wang Yilin et al. (2024-11)
     Extrudability-Analysis of 3D Printable Concrete as a Two-Phase Discrete Flow
906. Liu Bing, Guo Yazhao, Wang Yang, Liu Qizhou et al. (2024-11)
     Study on the Compression Performance of 3D Printing Concrete Permanent Formwork Composite Columns
907. Shahzad Qamar, Li Fangyuan (2024-11)
     Assessing the Load-Bearing Capacity of 3D Printed Concrete at Early-Ages:
     An Innovative Approach
908. Mandala Venugopal, Khan Mohd (2024-11)
     Experimental Investigations on Layered Functionally Graded Fiber-Reinforced Concrete
909. Nienaber Linda, Kanyenze Simba, Combrinck Riaan (2024-11)
     Water Absorption Reduction of 3D Printed Concrete Using Silicones
910. Zhao Herui, Jiang Quan, Xia Yong, Liu Jian et al. (2024-11)
     Microbial-Induced Carbonate Reinforcement for 3D Printed Concrete:
     Testing in Printable and Mechanical Strength
911. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2024-11)
     Enhancing Thermo-Mechanical and Moisture Properties of 3D Printed Concrete Through Recycled Ultra-Fine Waste-Glass-Powder
912. Immelman Jandré, Pourbehi Mohammad, Ameh Alechine, Katambwe Vinny et al. (2024-11)
     Characterisation and Formulation of Waste Augmented 3D Printable Concrete for BIM-Based Automation
913. Lachmayer Lukas, Recker Tobias, Ekanayaka Virama, Hürkamp André et al. (2024-10)
     Multi-Model-Based Additive Manufacturing:
     A Framework for Automated Large-Scale 3D Concrete Printing with Industrial Robots
914. Fasihi Ali, Libre Nicolas (2024-10)
     Interaction Between Material and Process-Parameters During 3D Concrete-Extrusion-Process
915. Zeng Jun-Jie, Hu Xianwen, Sun Hou-Qi, Liu Yue et al. (2024-10)
     Triaxial Compressive Behavior of 3D Printed PE-Fiber-Reinforced Ultra-High-Performance Concrete
916. Wang Bolin, Yang Min, Liu Shilong, Liu Xianda et al. (2024-10)
     Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multi-Modal Analysis
917. Liu Bing, Cheng Xiao-Ming, Wang Lian-Gang, Qian Kai (2024-10)
     Compressive Performance of PVA Fiber-Reinforced 3D Concrete Printing Permanent Formwork Composite Columns Reinforced with BFRP-Bars
918. Yang Yekai, Zhang Chiyu, Liu Zhongxian, Dong Liang et al. (2024-10)
     Effect of Hydration Process on the Inter-Layer Bond Tensile Mechanical Properties of Ultra-High-Performance Concrete for 3D Printing
919. Adamtsevich Liubov, Pustovgar Andrey, Adamtsevich Aleksey (2024-10)
     Assessing the Prospects and Risks of Delivering Sustainable Urban Development Through 3D Concrete Printing Implementation
920. Bang Jin, Yim Hong (2024-10)
     Unbonded Inter-Layer Evaluation in Freshly 3D Printed Concrete Using Electrical Resistivity Measurements
921. Lim Sean, Tan Ming (2024-10)
     A Rheological Model for Concrete Additive Manufacturing
922. Senf Ferdinand, Javed Rezan, Funke Henrik, Gelbrich Sandra (2024-10)
     Concrete-Extrusion Using Sustainable Cement Alternatives
923. Lindner Marco, Gliniorz Ralf, Funke Henrik, Männel Mike et al. (2024-10)
     Tool-Development for Pre-Cast Concrete Elements in Robot-Assisted Flow-Production
924. Neef Tobias, Görtzen Tom, Niemeyer Alice, Mechtcherine Viktor (2024-10)
     Material-Saving Concrete Ceiling Made from 3D-Printed Interlocking Blocks
925. Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-10)
     Efficient Production of Pre-Cast Concrete Staircases Using Additive-Manufactured, Component-Integrated Formworks Systems
926. Abstoß Marvin, Funke Henrik, Gelbrich Sandra (2024-10)
     Sustainable Production of Complex Precast Concrete Elements Without Demolding Drafts Using Concrete Extrusion and Processing
927. Liu Chao, Zhang Yukun, Liu Huawei, Wu Yiwen et al. (2024-10)
     Inter-Layer Reinforced 3D Printed Concrete with Recycled Coarse Aggregate:
     Shear Properties and Enhancement Methods
928. Yu Ke-Ke, Zhao Tai-Qi, Lou Qi-Ling, Ping Yang (2024-10)
     Recycled PET Fibers with Dopamine Surface Modification for Enhanced Inter-Layer Adhesion in 3D Printed Concrete
929. Raza Saim, Manshadi Behzad, Sakha Mahsa, Widmann Robert et al. (2024-10)
     Load Transfer Behavior of 3D Printed Concrete Formwork for Ribbed Slabs Under Eccentric Axial Loads
930. Lin Yini, Yan Jiachuan, Sun Ming, Han Xiaoyu et al. (2024-10)
     Inter-Layer Cohesion in 3D Printed Concrete:
     The Role of Width-to-Height-Ratio in Modulating Transport Properties and Pore-Structure
931. Wysoczanski Andrzej (2024-10)
     The Use of Additively Manufactured Concrete Objects
932. Chen Yidong, Zhang Yunsheng, Quan Hongzhu, Liu Cheng et al. (2024-10)
     Early-Age Time-Dependent Mechanical Properties of 3D Printed Concrete with Coarse Aggregates
933. Seo Eun-A, Lee Hojae (2024-10)
     Influence of Chemical Admixtures on Buildability and Deformation of Concrete for Additive Manufacturing
934. Jin Peng, Hasany Masoud, Kohestanian Mohammad, Mehrali Mehdi (2024-10)
     Micro/Nano Additives in 3D Printing Concrete:
     Opportunities, Challenges, and Potential Outlook in Construction Applications
935. Chamatete Kunda, Yalçınkaya Çağlar (2024-10)
     Numerical Assessment of Thermal Bridging Effects in 3D Printed Foam-Concrete Walls
936. Cai Jianguo, Wang Jingsong, Zhang Qian, Du Caixia et al. (2024-10)
     State of the Art of Mechanical Properties of 3D Printed Concrete
937. An Ning, Wang Huai, Le Liu, Li Shuo et al. (2024-10)
     Real-Time Monitoring of Extrudability and Buildability in 3D Concrete Printing Based on Target Detection Method
938. Aminpour Nima, Memari Ali (2024-10)
     Numerical and Experimental Study on Reinforced 3DCP Walls Filled with Lightweight Concrete
939. Hoang Pham, Moon Hyosoo, Ahn Yonghan (2024-10)
     Optimizing 3D Printed Concrete Mixtures for Extraterrestrial Habitats:
     A Machine Learning Framework
940. Dong Enlai, Jia Zijian, Jia Lutao, Rao Suduan et al. (2024-10)
     Modeling Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete Based on Stereology-Theory
941. Oliveira Francisco, Picelli Sanches Renato, Nelli Silva Emílio, Barari Ahmad et al. (2024-10)
     Topology-Optimization in 3D Concrete Printing to Reduce Greenhouse Gas Emissions
942. Du Guoqiang, Qian Ye (2024-10)
     Bio-Inspired Innovations in 3D Concrete Printing:
     Structures, Materials and Applications
943. Placzek Gerrit, Schwerdtner Patrick (2024-10)
     Comparison of Machine- and Performance Specifications of Concrete 3D Printers
944. Sahai Rajan, Bisht Ravindra, Kumar Shivam, Singh Siddharth et al. (2024-10)
     Modeling and Simulation of 3D Printed Concrete Layers and Validation Using Gantry Robotic Printer
945. Park Keunhyoung, Memari Ali, Hojati Maryam, Radlińska Aleksandra et al. (2024-10)
     Effects of Anisotropic Mechanical Behavior on Nominal Moment Capability of 3D Printed Concrete Beam with Reinforcement
946. Lan Tian, Yang Shutong, Xu Mingqi, Chen Zhengyuan et al. (2024-10)
     Quantitative Assessment of Interfacial-Fracture-Properties in 3D Printed Alkali-Activated Recycled Sand Concrete Based on a Closed-Form Fracture-Model
947. Sun Junbo, Zhang Yanling, Wu Qi, Wang Yufei et al. (2024-10)
     3D Printed Concrete Incorporating Waste-Rubber:
     Anisotropic Properties and Environmental Impact-Analysis
948. Althoey Fadi, Zaid Osama, Ahmed Bilal, Elhadi Khaled (2024-10)
     Impact of Double Hooked Steel-Fibers and Nano-Kaolin-Clay on Fresh Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete
949. Zhao Wanting, Zhao Yu, Zhu Lingli, Guan Xuemao (2024-10)
     Preparation of 3D Printed Concrete from Solid Waste:
     Study of the Relationship Between Steel-Slag Characteristics and Early Performance in 3D Printing
950. Over Derya, Ozbakan Nesil, Bustani Mehmet, Karali Bulut (2024-10)
     An Investigation of Rheological Properties and Sustainability of Various 3D Printing Concrete Mixtures with Alternative Binders and Rheological Modifiers
951. Madrid Javier, Ortega Guillermo, Olsson Nils, Tenorio Ríos José (2024-10)
     3D Constructing:
     Exploring the Potential of 3D Concrete and Clay Printing with Generative Design for Architectural Innovation
952. Chen Yuning, Xia Kailun, Dong Enlai, Cao Ruilin et al. (2024-10)
     A Mechanical Characteristic Capture-Method Considering Printing-Configurations for Buildability-Modeling in Concrete 3D Printing
953. Markin Slava, Cordova Julian, Combrinck Riaan, Mechtcherine Viktor (2024-09)
     Deformation Behavior of 3D Printed Concrete Elements Induced by Plastic Shrinkage
954. Shen Kaige, Ding Tao, Cai Chen, Xiao Jianzhuang et al. (2024-09)
     Feasibility-Analysis of 3D Printed Concrete with Sludge-Incineration-Slag:
     Mechanical Properties and Environmental Impacts
955. Subramaniam Kolluru, Paritala Spandana, Kulkarni Omkar, Thakur Manideep (2024-09)
     Fracture in 3D Printed Concrete Beams:
     Deflection and Penetration of Impinging Cracks at Layer Interfaces
956. Chen Baixi, Qian Xiaoping (2024-09)
     Data-Driven Reliability-Oriented Buildability-Analysis of 3D Concrete Printed Curved Wall
957. Ma Wei, Wang Guosheng, Zhou Yaya, Xu Qinghu et al. (2024-09)
     Polyacrylonitrile-Fiber-Reinforced 3D Printed Concrete:
     Effects of Fiber Length and Content
958. Samrani Phebe, Cao Yifang, Fimbres-Weihs Gustavo, Sanjaya Eric et al. (2024-09)
     Effect of Fly-Ash and Ground Waste Glass as Cement Replacement in Concrete 3D Printing for Sustainable Construction
959. Tang Hong, Xiong Shiqi (2024-09)
     Comparative Analysis of Carbon-Emission Accounting and Carbon-Reduction-Effect of 3D Printed Concrete Structures at the Stage of Architecturalization
960. Kloft Harald, Sawicki Bartłomiej, Bos Freek, Dörrie Robin et al. (2024-09)
     Interaction of Reinforcement, Process, and Form in Digital Fabrication with Concrete
961. Schweizer Katie, Bhandari Sunil, Lopez-Anido Roberto, Korey Matthew et al. (2024-09)
     Recycling Large-Format 3D Printed Polymer Composite Formworks Used for Casting Pre-Cast Concrete:
     Technical Feasibility and Challenges
962. Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2024-09)
     Data-Driven Design-Process and Production of Stress-Optimized Concrete Girders with Integrated Tendons Using 3D Printing
963. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2024-09)
     Additive Flow Production of Lightweight Precision Concrete Elements
964. Shahib Al Bari M., Ekaputri Januarti (2024-09)
     The Effect of Fiber on the Green Strength and Buildability of High-Strength 3D Printing Concrete
965. Liu Chao, Banthia Nemkumar, Shi Yifan, Jia Zijian et al. (2024-09)
     Early-Age Shrinkage Mitigation and Quantitative Study on Water Loss Kinetics of 3D Printed Foam-Concrete Modified with Superabsorbent Polymers
966. Ivaniuk Egor, Tošić Zlata, Lordick Daniel, Mechtcherine Viktor (2024-09)
     Flow Production of Variable Curved Modules for Thin-Walled Concrete Shell Structures
967. Shivendra Bandoorvaragerahalli, Sharath Chandra Sathvik, Singh Atul, Kumar Rakesh et al. (2024-09)
     A Path Towards SDGs:
     Investigation of the Challenges in Adopting 3D Concrete Printing in India
968. Shakur Emad, Shaked Adaya, Amir Oded (2024-09)
     Topology and Shape-Optimization of 3D Pre-Stressed Concrete Structures
969. Tran Nhi, Tran Mien, Tran Jonathan, Nguyen Anh et al. (2024-09)
     Eco-Friendly 3D Printed Concrete Using Steel-Slag-Aggregate:
     Buildability, Printability and Mechanical Properties
970. Aldabergenova Gaziza, Jexembayeva Assel, Konkanov Marat, Kirgizbayev Akpan et al. (2024-09)
     The Efficient Waste-Based Fine-Grained Fiber Concretes for 3D Printing
971. Mikhalev Daniil, Fakhrayee Nejad Siamak, Ng Serina, Bose Baishakhi et al. (2024-09)
     Practical Insights and Advances in Concrete Pumping
972. Jin Willy, Roux Charlotte, Ouellet-Plamondon Claudiane, Caron Jean-François (2024-09)
     Life Cycle Assessment of Limestone-Calcined-Clay-Concrete:
     Potential for Low-Carbon 3D Printing
973. Curth Alexander, Pearl Natalie, Wissemann Emily, Cousin Tim et al. (2024-09)
     EarthWorks:
     Zero-Waste 3D Printed Earthen Formwork for Shape-Optimized, Reinforced Concrete Construction
974. Chen Baixi, Zhao Xueqi, Qian Xiaoping (2024-09)
     Voxel-Based Path-Driven 3D Concrete Printing Process Simulation Framework Embedding Inter-Layer Behavior
975. Wang Qiang, Yang Wenwei, Wang Li, Zhang Dan et al. (2024-09)
     Flexural Performance of the Integrated Steel-Truss-Reinforced 3D Printed Concrete Beams:
     Experimental and Numerical Analysis
976. Kamhawi Abdallah, Meibodi Mania (2024-09)
     Techniques and Strategies in Extrusion-Based 3D Concrete Printing of Complex Components to Prevent Premature Failure
977. Lim Sean, Tay Yi, Paul Suvash, Lee Junghyun et al. (2024-09)
     Carbon Capture and Sequestration with In-Situ CO2 and Steam Integrated 3D Concrete Printing
978. Andreou Vasilis, Kontovourkis Odysseas (2024-09)
     Formwork-Optimization for Complex 3D Concrete Printing:
     A Unified Theoretical, Digital, and Experimental Framework
979. Brodmann Anton, Damtsas Efstathios, Schult Christoph, Spaeth Benjamin et al. (2024-09)
     DesignBuild Project of a 3D Printed Concrete Shell with a Segmented and Stereotomic Construction Concept
980. Licen Jurij, Chen Taole (2024-09)
     Use of Genetic Optimization-Algorithms in the Design of 3D Concrete Printed Shell-Structures
981. Vele Jiří, Melter Oto, Hvizdal Ales, Achten Henri et al. (2024-09)
     Enhancing 3D Concrete Printing Buildability with Non-Planar Layering:
     A Case Study
982. Srinivas Dodda, Boddepalli Uday, Dey Dhrutiman, Choaudhary Bhavesh et al. (2024-09)
     Development of Outdoor Furniture Using 3D Concrete Printing
983. Cao Jing, Shengzhao E., Yang Yi, Shi Yaming et al. (2024-09)
     A Strategy for the Improvement of the Bonding Performance of 3D Printed Concrete Inter-Layer Interfaces
984. Wolfs Robert (2024-09)
     The Status Quo of 3D Concrete Printing:
     Are We There Yet?
985. Reißig Silvia, Herdan Annika, Mechtcherine Viktor (2024-09)
     Rheological Behavior of Steel-Fiber-Reinforced Concrete in the Context of Additive Manufacturing
986. Neef Tobias, Mechtcherine Viktor (2024-09)
     Continuous Fiber-Reinforcement for Extrusion-Based 3D Concrete Printing
987. Ogura Hiroki, Hara Koichiro, Yamamoto Shinya, Abe Hiroyuki (2024-09)
     Flexural Performance of Fiber-Reinforced 3D Printed Concrete Beams with Axial Rebar
988. Wang Xianggang, Dong Enlai, Jia Zijian, Jia Lutao et al. (2024-09)
     Specimen-Size-Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water-to-Binder-Ratios
989. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Han Jinsheng et al. (2024-09)
     Influence of Waste-Glass-Powder on Printability and Mechanical Properties of 3D Printing Geopolymer Concrete
990. Ma Xin-Rui, Wang Xian-Lin, Chen Shi-Zi (2024-09)
     Trustworthy Machine Learning-Enhanced 3D Concrete Printing:
     Predicting Bond Strength and Designing Reinforcement Embedment Length
991. Liu Xiaoshuang, Li Shiming, Duan Yanjun, Du Zhiqin et al. (2024-09)
     Influence of Printing Interval on the Imbibition Behavior of 3D Printed Foam-Concrete for Sustainable and Green Building Applications
992. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2024-09)
     Development of a Tool for Generating a Constant Volume-Flow with Peristaltic Pumps for Robot-Controlled Concrete-Extrusion
993. Haufe Carl, Castel Paula, Strahm Benedikt, Nigl David et al. (2024-09)
     A Digital Design Process for Bundling of Void Formers for Application in Functionally Graded Concrete
994. Hojati Maryam, Sedghi Reza, Li Zhanzhao, Memari Ali et al. (2024-09)
     Flexural Strength of 3D Printed Concrete Beams:
     Exploring Barbed-Wire Reinforcement and Cross-Sectional Geometry
995. Kamhawi Abdallah, Brown Jacob, Fahmy Ali, Meibodi Mania (2024-09)
     Waste-Free Production of Ultra-Thin Concrete Panels via Robotic 3D Printing and CNC Dynamic Bed Device
996. Padilla-Encinas Pilar, Fernández Raúl, Cuevas Jaime, Marieta Cristina et al. (2024-09)
     Low-Carbon Footprint Magnesium-Phosphate-Cement for 3D Concrete Printing
997. Yang Min, Yao Xiaofei, Zhao Liguo, Zhang Yamei et al. (2024-09)
     Bridging Ancient Artistry and Modern Engineering:
     A 3D Printed Concrete Arch Bridge Inspired by Millennium-Old Bronze Patterns Using an Integrated Concrete 3D Printing System
998. Monfort Maxime, Kim Jongbeom, Schaeffer Julien, Pastorelli Florent et al. (2024-09)
     Sprayed Concrete Automation:
     A Unique and Complete Digital Fabrication Method
999. Miranda Luiza, Lesage Karel, Schutter Geert, Roussel Nicolas (2024-09)
     Zone-Based Analysis of Layer Deformation in 3D Concrete Printing:
     Shoulder, Steady-State, and Foot Zones
1000. Tanaka Shunsei, Usui Tatsuya, Koga Yoshitaka, Miyamoto Shingo et al. (2024-09)
      Experimental Study of Tunnel Invert Construction Using 3D Concrete Printing
1001. Krakovská Ema, Briels David, Straßer Alexander, Kränkel Thomas et al. (2024-09)
      Functionally Hybridised Lightweight Concrete Components:
      Monolithic Building Construction Using Selective Paste-Intrusion
1002. Nana W., Baz Bilal, Blachier Christian, Peraud Mickaël et al. (2024-09)
      Mechanical Performance of 3D Printed Fiber-Reinforced Concrete
1003. Muthukrishnan Shravan, Feys Dimitri, Mikhalev Daniil, Baumert Christian et al. (2024-09)
      Comparison of Rotational Rheometers for Ready-Mix Concrete
1004. Gürel Şeyma, Chen Wei-Ting, Wangler Timothy, Lloret-Fritschi Ena et al. (2024-09)
      Scaling up in Digital Casting of Concrete:
      Towards Industry Integration
1005. Ammann Rebecca, Gebhard Lukas, Thoma Karel, Mata-Falcón Jaime et al. (2024-09)
      Environmental Benefits of Concrete Floor Slabs Produced with Digitally Fabricated Formworks:
      A Case Study
1006. Denis L., Omikrine-Metalssi O., Karam-Cabrerizo R., Barnes-Davin L. et al. (2024-09)
      Impact of Very Early-Age Drying on Printed Concrete Microstructures
1007. Marchment Taylor (2024-09)
      Concrete 3D Printed Marine Wind, Solar and Energy Storage Support Structures
1008. Vasilić Ksenija (2024-09)
      Additive Manufacturing with Concrete:
      The Path to Practical Implementation
1009. Johnson Carol, Jordan Joseph, Kreiger Eric, Kreiger Megan (2024-09)
      Blast Response of Additively Constructed Concrete
1010. Hanžič Lucija, Šter Katarina, Štefančič Mateja (2024-09)
      Implementing the Excess-Paste-Concept for a Systematic Mix-Design of Printable Concrete
1011. Osta Mohammad, Mukhtar Faisal (2024-09)
      Buildability-Analysis of 3D Concrete Printing Using Finite-Element-Method
1012. Abstoß Marvin, Funke Henrik, Gelbrich Sandra (2024-09)
      Production of High-Precision Formwork Elements Using Parametrically Programmed Concrete-Extrusion and Machining
1013. Kromoser Benjamin, Gappmeier Peter, Ahmed Iyad, Reichenbach Sara (2024-09)
      A New Approach for Automated Design and Robot-Assisted Production of Structurally Optimised Reusable Concrete Building Elements
1014. Sikora Paweł, Federowicz Karol, Techman Mateusz, Skibicki Szymon (2024-09)
      Fine Recycled Concrete Aggregates in 3D Printed Concrete
1015. Mechtcherine Viktor, Taubert Markus, Müller Steffen, Butler Marko et al. (2024-09)
      Integration of Steel Reinforcement into Extrusion-Based 3D Concrete Printing of Monolithic Concrete Elements
1016. Song Xinlei, Sun Xiaoyan, Wang Hailong (2024-09)
      Determination of Optimal Flowability of 3D Printing Concrete Based on Multi-Objective Optimization Method
1017. Jipa Mihail-Andrei, Anton Ana-Maria, Gebhard Lukas, Dillenburger Benjamin (2024-09)
      The Nubian Slab:
      3D Concrete Printed Stay-in-Place Formwork for Vaulted Slabs
1018. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-09)
      Active Rheology-Control of Concrete Using Encapsulated Accelerator as Responsive Additives for Concrete 3D Printing
1019. Corfe Ian (2024-09)
      A Digital Library for Using Mine-Tailings in Low-Carbon Concrete Replacements for Mine Back-Filling & 3D Printing
1020. Farhan Abdul, Xu Jie, Dobrzanski James, Kolawole John et al. (2024-09)
      Quantifying 3D Concrete Printing Production Waste
1021. Adams Thomas, Wu Chu, Müller Steffen, Mechtcherine Viktor et al. (2024-09)
      As-Built Monitoring of Concrete Structures
1022. Lima Lucas, Wangler Timothy, Sanchez Asel, Anton Ana-Maria et al. (2024-09)
      Durability of 3D Printed Concrete:
      Performance-Assessment of a Two-Component System Against Water Absorption, Carbonation, and Chloride-Ingress
1023. Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2024-09)
      Real-Time Monitoring and Feedback Operation System for 3D Printed Concrete Based on Computer-Vision
1024. Haripan Vislavath, Senthilnathan Shanmugaraj, Gettu Ravindra, Santhanam Manu et al. (2024-09)
      Open-Time and Extrudability-Performance-Analysis of 3D Printed Concrete with Recycled Concrete Fine Aggregates Using Rheological- and Computer-Vision-Techniques
1025. Giulivo Marco, Menna Costantino, Capozzi Vittorio, Asprone Domenico (2024-09)
      Experimental Behavior of a 3D Printed Concrete Wall with Fixed Base Anchorage Subjected to In-Plane Cyclic Loads
1026. Ahmed Ahmed, Rosa Raul, Gomaa Shady, Irizarry Elmer et al. (2024-09)
      Rheological Characterization of Nano-Modified Ultra-High-Performance Concrete for 3D Printing
1027. Dias José, Brandão Filipe, Figueiredo Bruno, Cruz Paulo (2024-09)
      The Potential of Natural Fiber-Reinforcement in 3D Printed Concrete:
      A Review
1028. Dey Dhrutiman, Panda Biranchi (2024-09)
      Numerical Evaluation of Thermal Performance and Improvement-Strategies for 3D Printed Concrete Structures
1029. Wolf Christoph, Robens-Radermacher Annika, Unger Jörg (2024-09)
      Optimization Framework for Large-Scale Powder-Bed 3D Printed Concrete Structures Under Various Constraints
1030. Gürel Şeyma, Wangler Timothy, Garger Moritz, Flatt Robert (2024-09)
      Residence-Time-Distribution Evaluation Method for In-Line Mixing Processes in Digital Concrete
1031. Wan Zhi, Xu Yading, Šavija Branko (2024-09)
      Creating Vascular Self-Healing Concrete Using Direct Ink Writing
1032. Colyn Markus, Babafemi Adewumi, Zijl Gideon (2024-09)
      Advancements in Sustainability of 3D Concrete Printing:
      Presenting Low-Carbon Mixtures for Additively Manufactured Concrete Structures in Practice
1033. Soave Francesco, Muciaccia Giovanni, Ferrara Liberato (2024-09)
      Experimental Setup for Shear and Inter-Layer Bonding in a 3D Printed Concrete Framework
1034. Tudela Marcell, Cardenas Palomino Kelssy, Bienvenu Sophie, Dunkelberg Federico et al. (2024-09)
      Development and Characterization of a Printable Concrete Made with Construction and Demolition-Waste-Aggregates
1035. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-09)
      Effect of Strain-Hardening Material on Seismic-Performance of 3D Printed Concrete Wall:
      A Numerical Study
1036. Gill Connor, Justham Laura, Lohse Niels, Haynes Adam et al. (2024-09)
      Measurement and Control of Serial Manipulator Robots for 3D Concrete Printing
1037. Versteege Jelle, Wolfs Robert, Salet Theo (2024-09)
      A Data-Driven View on Digital Fabrication with Concrete:
      The Case of Inter-Layer Bond Strength
1038. Hierden Naomi, Yu Q., Brouwers Henricus (2024-09)
      Mechano-Chemically Activated Local Clays as Sustainable Binder Replacement for 3D Concrete Mixtures
1039. Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
      Determination of Print Speed Based on the Fresh Mechanical Strength over Time of Additively Constructed Concrete by Unconfined Compression
1040. Walzer Alexander, Kozlova Mariia, Mohite Ashish, Yeomans Julian (2024-09)
      Improving a 3D Concrete Printing Factory Using Stochastic Modelling for Decision-Support
1041. Meibodi Mania, Lin Yuxin, Chen Hao (2024-09)
      Hybrid Approaches Towards 3D Concrete Printing for Lightweight Reinforced Concrete Structures
1042. Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-09)
      Efficient Production of Reinforced Pre-Cast Concrete Elements Using Additive Manufactured, Integrated Formwork
1043. Zhang Sisi, Claßen Martin, Olesch Mirco, Mäde Konrad et al. (2024-09)
      Prototypical Realization of Fully Automated 3D Printing of Reinforced Concrete Using AMoRC Method
1044. Rehman Atta, Kang Seungwoo, Kim Jung-Hoon (2024-09)
      Nozzle-Integrated Slump-Scanner-Test:
      Development of an Automated Shape-Stability and Instantaneous Yield-Stress-Measurement-Method for the Set-on-Demand 3D Concrete Printing
1045. Lehr Leonard, Pfeiffer Sven, Rasanani Mahdieh, Stephan Dietmar et al. (2024-09)
      3D Light on Site:
      Bringing Concrete Print to the Construction Site
1046. Neef Tobias, Görtzen Tom, Niemeyer Alice, Mechtcherine Viktor (2024-09)
      Investigation of Digitally Produced, Interlocking Concrete Blocks for a Modular Slab Construction
1047. Szögi Tamás, Kapitány Kristóf, Sólyom Sándor (2024-09)
      Characterization of 3D Concrete Printed Horizontal Structures Through Early-Age Deformation-Analysis
1048. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-09)
      Enhancing Inter-Layer Bond Strength and Flexural Performance in 3D Concrete Printing with SHCC Bonding Agents
1049. Hüsken Götz, Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph (2024-09)
      An Assessment of the Repeatability of 3D Printed Concrete Structures
1050. Aouichat Belkis, Hosseinpoor Masoud, Yahia Ammar, Dupuis Mario (2024-09)
      How Can Nanocellulose Contribute to Enhance the Performance of Concrete 3D Printing?
1051. Mahmoudi Matineh, Wangler Timothy, Flatt Robert (2024-09)
      Robustness of Digital Concrete:
      Effects of Temperature, Accelerator Type and Dosage
1052. Schmid Robert, Gierlinger David, Hansemann Georg, Trummer Andreas et al. (2024-09)
      Filigree Façade Panels Fabricated by 3D Concrete Printing
1053. Rehman Atta, Kim Ik-Gyeom, Kim Jung-Hoon (2024-09)
      Exploring the Impact of the Pumping Process on the Structural Build-Up in the Context of 3D Concrete Printing
1054. Tao Yaxin, Tittelboom Kim, Rahul Attupurathu, Wangler Timothy et al. (2024-09)
      Static Mixing for Set-on-Demand of Digital Concrete
1055. Keita Emmanuel, Zuo Wenqiang, Caneda-Martínez Laura, Aimedieu Patrick et al. (2024-09)
      X-Ray Tomography Insights into Early Drying Effects in 3D Concrete Printing
1056. Nakase Kota, Hashimoto Katsufumi, Sugiyama Kentaro, Mori Hiroaki et al. (2024-09)
      Effect of Printing Parameters on Print Quality and Fracture Propagation Behavior of 3D Printed Concrete
1057. Qian Shunzhi, Zhao Huanyu, Meng Dan (2024-09)
      Numerical Study of Concrete Beams with 3D Printed Strain-Hardening Cementitious Composites (SHCC)
1058. Obermeier Nico, Brunner Kim, Wiese Felix, Stengel Thorsten (2024-09)
      Development of Low-Cement Lightweight Concrete Mixes for 3D Extrusion Printing
1059. Shen Wenbin, Wang Hailong, Sun Xiaoyan (2024-09)
      Influence of Coarse Aggregates on the Performance of 3D Printing Concrete
1060. Zat Tuani, Schmitt Duarte Ester, Webber Jaine, Matos Paulo et al. (2024-09)
      Comparison Between Yield-Stress-Measurements for Fiber-Reinforced 3D Concrete Printing
1061. Muy Yeakleang, Courard Luc, Bulteel David, Rémond Sébastien et al. (2024-09)
      Influence of Nozzle-Diameter on the Anisotropy of Compressive Strength:
      Measured on 3D Printing Concrete Designed with Recycled Fine Aggregates
1062. Paritala Spandana, Singh Prashant, Kamakshi Tippabhotla, Subramaniam Kolluru (2024-09)
      Assessment of Printability of Concrete Based on Packing of Aggregates
1063. Gomzyakov Albert, Taubert Markus, Sokolov Dmitrii, Reuter Uwe et al. (2024-09)
      Setup for ML-Based Prediction of Concrete Rheology from 3D Slump-Test-Geometry
1064. Maierdan Yierfan, Armistead Samuel, Mikofsky Rebecca, Carcassi Olga et al. (2024-09)
      Exploring Locust Bean Gum as a Robust Binder and Rheology Modifier for Earth Concrete
1065. Rangel Carolina, Salet Theo, Lucas Sandra (2024-09)
      A Framework for Crafting Sustainable Lightweight Concrete in Additive Manufacturing
1066. Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2024-09)
      Challenging the Limits of Fluid FEM Modelling in 3D Concrete Printing
1067. Mostert Jean-Pierre, Kruger Jacques (2024-09)
      Improving Durability Performance of 3D Printed Concrete via Topological Interlocking of Layers
1068. Nana W., Dell’Endice Alessandro, Bhooshan Vishu, Zhou Fulei et al. (2024-09)
      Decarbonizing Concrete Construction:
      Case of the Phoenix 3D Printed Footbridge and Learnings for Engineering and Architecture
1069. Daadouch Koussay, Reinold Janis, Meschke Günther (2024-09)
      Numerical Simulation of 3D Concrete Printing:
      From the Layer- to the Structural-Scale
1070. Sokolov Dmitrii, Mechtcherine Viktor (2024-09)
      3D Vision in 3D Concrete Printing
1071. Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph, Hüsken Götz (2024-09)
      Correlation of Continuously Measured In-Line Process Parameters and Extruded Geometry in 3D Concrete Printing Experiments
1072. Thiel Charlotte, Hechtl Christian, Gehlen Christoph, Kränkel Thomas (2024-09)
      Sustainability Potential of Additive Manufactured Concrete Structures:
      Studies on the Life Cycle Assessment and Circularity of an Extruded Exterior Wall
1073. Soto Alejandro, Gebhard Lukas, Anton Ana-Maria, Dillenburger Benjamin et al. (2024-09)
      Structural Testing Campaign for a 30 m Tall 3D Printed Concrete Tower
1074. Böhler David, Mai (née Dressler) Inka, Lowke Dirk (2024-09)
      Durability of 3D Printed Concrete:
      A Comparison of Extrusion 3D Printing, Shotcrete 3D Printing and Conventional Casting
1075. Foiles Dreycen, Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
      The Effect of Coarse/Fine Aggregate Ratios on the Properties of Additively Constructed Concrete
1076. Cutajar Sacha, Quadranti Elia, Lloret-Fritschi Ena (2024-09)
      3D Printed Earth Formworks for Concrete:
      Exploring Fabrication Feasibility for Complex Filler Slabs
1077. Reißig Silvia, Herdan Annika, Mechtcherine Viktor (2024-09)
      Characterisation of the Rheological Behavior of a Resource-Saving Sustainable Concrete in the Context of 3D Printing
1078. Joon Hillar, Peetrimägi Lauri (2024-09)
      Influence of Illitic Calcined Clay on Properties of Mixtures for 3D Concrete Printing
1079. Hage Ali, Paquet Elodie, Leklou Ali, Neu Thibault et al. (2024-09)
      Navigating the Digital Chain in Concrete 3D Printing
1080. Mezhov Alexander, Robens-Radermacher Annika, Unger Jörg, Schmidt Wolfram (2024-09)
      Effect of the Ambient Temperature on the Structural Build-Up of 3D Printed Concrete:
      Experimental and Modelling Study
1081. Zhao Cong, Wang Hailong, Sun Xiaoyan (2024-09)
      Cross-Layer Reinforcement Robot for 3D Printing Concrete:
      Hardware, Software, and Validation
1082. Bang Jin, Yim Hong (2024-09)
      Non-Destructive Evaluation for the Unbonded Inter-Layer of 3D Printed Concrete
1083. Mudadu Antonio, Giulivo Marco, Menna Costantino (2024-09)
      The Effect of Printing-Path on the Shear Behavior of 3D Printed Concrete Panels Under Diagonal Compression-Test
1084. Wolfs Robert, Gümrük Idil, Driessen Saar, Ferguson Matthew et al. (2024-09)
      3D Concrete Printing and Circularity:
      Designing, Testing, and Modelling Dry Joints for Structural Applications
1085. Egawa Ryo, Nezu Shoichi, Nishijo Keisuke, Ohno Kazunori et al. (2024-09)
      Different Sized Metal Reinforcement Insertion System Using Cartridge Replacement Mechanism for 3D Concrete Printer
1086. Liu Ruiqing, Du Hongjian (2024-09)
      Improving Thermal Insulation Performance of 3D Printed Concrete Wall
1087. Canavarro Cavalcante Tiago, Castrillon Fernandez Letitia, Toledo Filho Romildo, Mendoza Reales Oscar (2024-09)
      3D Printable Mortars with Different Recycled Concrete Powders as Fillers
1088. Gümrük Idil, Wolfs Robert, Schröder Torsten, Salet Theo (2024-09)
      Circular Design-Strategies for 3D Concrete Printing in the Built Environment
1089. Irizarry Elmer, Gomaa Shady, Rosa Raul, Ahmed Ayesha et al. (2024-09)
      Mechanical Characterization of 3D Printed Ultra-High-Performance Concrete
1090. Zhang Nan, Sanjayan Jay (2024-09)
      Rheological Modifiers in Optimizing Quick Nozzle Mixing Technology for 3D Concrete Printing
1091. Dörrie Robin, David Martin, Freund Niklas, Lowke Dirk et al. (2024-09)
      Surface Processing of Shotcrete 3D Printed Concrete Elements Using a Rotating Trowel Disc:
      Influence of Timing on Resulting Surface Quality
1092. Markin Slava, Mechtcherine Viktor (2024-09)
      Mitigating Plastic Shrinkage and Cracking in 3D Printed Concrete Through Surface Rewetting
1093. Rehman Atta, Kang Manmin, Basha Shaik, Choi Kichang et al. (2024-09)
      Knife-Cut-Test of Concrete:
      The Introduction of a New Test-Method for Measurement of the Structural Build-Up of 3D Concrete Printing-Materials
1094. Zimmermann Stefan, Griego Danielle, Flatt Robert (2024-09)
      Visualizing Defects of Concrete 3D Printed Structures with Augmented Reality Based on Machine Learning-Driven Image-Analysis
1095. Khan Mehran, McNally Ciaran (2024-09)
      A Review of Developments in Low-Carbon 3D Printed Concrete in Europe:
      Steps Towards Sustainable Construction
1096. David Martin, Dröder Klaus (2024-09)
      Robot-Guided End Effector for an Automated Finishing of Concrete Free-Form Surfaces
1097. Silfwerbrand Johan (2024-09)
      Composite Concrete Columns of 3DP Concrete and Self-Compacting Concrete Subjected to Normal Force
1098. Sun Xiaoyan, Lin Xiqiang, He Huanan, Yang Hongyang et al. (2024-09)
      Steel Reinforced 3D Printing Concrete Housing Building and Its Modular Assembly Construction
1099. Will Frank, Storch Florian, Plaschnick Paul, Taubert Markus et al. (2024-09)
      Large-Scale Monolithic Printing with Ready-Mixed Concrete:
      Challenges and Solutions
1100. Nerella Venkatesh, Degen Robin, Frasch Markus (2024-09)
      On-Site Ready-Mix Concrete 3D Printing with Karlos
1101. Schneider Philip, Dietrich Sebastian, Richter Christiane, Asl Reza et al. (2024-09)
      Fabrication-Aware Design Method and Experimental Assessment of a Segmented Concrete Pedestrian Bridge Using SPI Technology.
1102. Rodrigues e Silva Rafaela, Souza Eduarda, Ribeiro Borges Paulo (2024-09)
      One-Part and Two-Part Alkali-Activation of Iron Mining-Tailings for Sustainable 3D Concrete Printing Mixes
1103. Parmigiani Silvia, Falliano Devid, Moro Sandro, Ferro Giuseppe et al. (2024-09)
      Preliminary Study on Multi-Functional Building Components Utilizing Variable Density Foamed Concrete via 3D Printing
1104. Bharti Mrityunjay, Menon Arun, Santhanam Manu (2024-09)
      Non-Linear Behavior Under Compression of Hardened 3D Printed Concrete
1105. Mohemmi Morteza, Sadeghian Vahid, Panda Biranchi, Boyle Sheryl (2024-09)
      Numerical Modeling of Lateral Resistance of 3D Printed Concrete Walls
1106. Chaudhari Ojas, Johansson Jan, Haage Mathias, Sjölander Andreas et al. (2024-09)
      3D Printing-Strategy and Implementation for Concrete Prefabrication Industry in Sweden
1107. Kariouh Anass, Popescu Mariana (2024-09)
      Reusable Flexible Formworks for Constructing Complex Concrete Structures
1108. Anton Ana-Maria, Dillenburger Benjamin (2024-09)
      Towards a Sustainable 3D‐Concrete‐Printed Architecture:
      Assemblies, Detailing and Ornamentation
1109. Hack Norman, Kloft Harald, Mai (née Dressler) Inka, D'Acunto Pierluigi et al. (2024-09)
      Injection 3D Concrete Printing:
      From Structural Geometry to Fabrication
1110. Amicarelli Fabio, Lloret-Fritschi Ena (2024-09)
      Optimising Concrete Slabs with Paper Formworks
1111. Wangler Timothy, Patankar Yamini, Flatt Robert (2024-09)
      Sustainable Digital Concrete:
      Myth, Reality or Emerging Opportunity?
1112. Auer Daniel, Bos Freek, Fischer Oliver (2024-09)
      3DCP.fyi:
      A Comprehensive Citation Network Graph on the State of the Art in 3D Concrete Printing
1113. Ma Liangzhu, Yin Deshun, Ren Jiangtao, Tian Mingyuan et al. (2024-09)
      An Effective Thixotropic Structural-Dynamics Rheological-Model for 3D Printed Concrete Materials in the Flow-State
1114. Wei Yazhi, Zhang Hui (2024-09)
      Influence of Temperature and Humidity on Mechanical Properties of Calcined-Oyster-Shell-Powder-Modified 3D Printed Concrete
1115. Lowke Dirk, Anton Ana-Maria, Buswell Richard, Jenny Ercan et al. (2024-09)
      Digital Fabrication with Concrete Beyond Horizontal Planar Layers
1116. Liu Bing, Chen Yuwen, Li Dongdong, Wang Yang et al. (2024-09)
      Study on the Fracture Behavior and Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete
1117. Ting Guan, Tay Yi, Quah Tan, Tan Ming et al. (2024-09)
      Sustainable Support-Material for Overhang Printing in 3D Concrete Printing Technology
1118. Gao Jianhao, Wang Chaofeng, Li Jiaqi, Chu S. (2024-09)
      Data-Driven Rheological-Model for 3D Printable Concrete
1119. Qiu Minghong, Sun Yan, Qian Ye (2024-09)
      Impact of Groove-and-Tongue Parameters on the Bonding Behavior Between 3D Printed UHP-SHCC and Cast Normal Concrete
1120. Ravindran Vishwanath, Ranganathan Thiyagarajan, Rahul Attupurathu (2024-08)
      Migration of Particles Suspended in Yield-Stress Fluids:
      Insights from Numerical Simulation of Pipe Flow of 3D Printable Concrete
1121. Yao Yiming, Zhang Jiawei, Sun Yuanfeng, Pi Yilin et al. (2024-08)
      Mechanical Properties and Failure Mechanism of 3D Printing Ultra-High-Performance Concrete
1122. Mani Aravindhraj, Sekar Muthu (2024-08)
      Non-Destructive Testing Techniques for Investigating Mechanical Property and Porosity-Disparities in Extrusion 3D Printed Concrete
1123. Mitrović Stefan, Ignjatović Ivan (2024-08)
      Connections Between Single Elements Made by 3D Printed Concrete
1124. Thajeel Marwah, György L. (2024-08)
      Hardened Properties of 3D Printed Concrete Influenced by Anisotropy
1125. Prihar Arjun, Gupta Shashank, Esmaeeli Hadi, Moini Mohamadreza (2024-08)
      Tough Double-Bouligand Architected Concrete Enabled by Robotic Additive Manufacturing
1126. Ler Kee-Hong, Ma Chau-Khun, Chin Chee-Long, Ibrahim Izni et al. (2024-08)
      Porosity and Durability Tests on 3D Printing Concrete:
      A Review
1127. Sahu Akshay, Panda Biranchi (2024-08)
      A TSP-Based Continuous Path-Planning for Additive Manufacturing of Concrete
1128. Huseien Ghasan, Tan Shea, Saleh Ali, Lim Nor et al. (2024-08)
      Test-Procedures and Mechanical Properties of Three-Dimensional Printable Concrete Enclosing Different Mix-Proportions:
      A Review and Bibliometric Analysis
1129. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
      On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
1130. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
      Snapshot on 3D Printing with Alternative Binders and Materials:
      Earth, Geopolymers, Gypsum and Low-Carbon Concrete
1131. Wolfs Robert, Bos Derk, Caron Jean-François, Gerke Markus et al. (2024-08)
      On-Line and In-Line Quality-Assessment Across All Scale Levels of 3D Concrete Printing
1132. Bodea Serban, Dell’Endice Alessandro, Aloutsanidis Vasilis, Bürgin Theophil et al. (2024-08)
      Phoenix 3D Concrete-Printed Bridge:
      Falsework System and Construction Process Development
1133. Amiri Fatemeh, Baghdadi Abtin, Kwon Hyunchul (2024-08)
      New Reinforcement Approach for Freeform Concrete Components Through Carbon Fiber 3D Printing
1134. Lo Tzu-Hsien, Liu Bosheng (2024-08)
      Overview of Injection Liquid Printing with Dredged-Based Material for Concrete Formwork
1135. Bono Victor, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2024-08)
      Design, Structural Optimization and Fabrication of Concrete Shell Through Fiber-Reinforced 3D Printing
1136. Chai Hua, Ororbia Maximilian, Zhi Yefan, Welch Ryan et al. (2024-08)
      Design Approach for a Post-Tensioned Funicular Concrete Beam
1137. Bolhassani Damon, Yavartanoo Fahimeh, Tapia Javier, Akbarzadeh Masoud et al. (2024-08)
      The Effect of Post-Tensioning on the Behavior of Small-Scale 3D Printed Concrete Beams
1138. Ororbia Maximilian, Chai Hua, Zhi Yefan, Vakhshouri Pouria et al. (2024-08)
      Experimental Study of a Funicular Concrete Beam Prototype
1139. Vatandoost Mohsen, McGee Wesley, Buelow Peter (2024-08)
      Ultra-Thin-Layered 3D Printed Hollow-Core Sections for Concrete Casting
1140. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-08)
      Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing-Technology
1141. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-08)
      Time-Dependent Behavior of 3D Printed Fiber-Reinforced Limestone-Calcined-Clay-Cement Concrete Under Sustained Loadings
1142. Gebhard Lukas, Mata-Falcón Jaime, Ammann Rebecca, Pressmair Nadine et al. (2024-08)
      Enhancing Structural Efficiency with Digital Concrete:
      Principles, Opportunities and Case Studies
1143. Fernand Muhirwa, Li Yaqi, Qian Qiwei, Chi Yin et al. (2024-08)
      Effects of Coarse Aggregates on 3D Printability and Mechanical Properties of Ultra-High-Performance Fiber-Reinforced Concrete
1144. Soto Rubio Mauricio, Mirza Muhammad, Kagdi Mustafa, Bisati Ahmad (2024-08)
      Examining the Role of Concrete 3D Printing for Housing Construction on Indigenous Reserves in Canada
1145. Farrokhsiar Paniz, Gürsoy Benay, Duarte José (2024-08)
      A Comprehensive Review on Integrating Vision-Based Sensing in Extrusion-Based 3D Printing Processes:
      Toward Geometric Monitoring of Extrusion-Based 3D Concrete Printing
1146. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2024-08)
      Effect of Pumping Process on the Properties of 3D Printed Concrete Containing Air-Entraining-Agent
1147. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2024-08)
      Exploration of the Open-Time and Compressive Strength of Alkali-Activated Mixtures for 3D Printed Concrete
1148. Shahzad Qamar, Li Fangyuan (2024-08)
      Assessment of Load-Bearing Capacity and Buildability Failures in 3D Printed Concrete Structures
1149. Wangler Timothy, Tao Yaxin, Das Arnesh, Mahmoudi Matineh et al. (2024-08)
      Aluminate 2K Systems in Digital Concrete:
      Process, Design, Chemistry, and Outlook
1150. Rudziewicz Magdalena, Maroszek Marcin, Setlak (nee Pławecka) Kinga, Góra Mateusz et al. (2024-08)
      Optimization of Foams-Polypropylene Fiber-Reinforced Concrete Mixtures Dedicated for 3D Printing
1151. Yao Yiming, Bu Dechao, Yu Jiamian, Shao Lijing et al. (2024-08)
      Flexural Behavior of Textile Reinforced 3D Printed Concrete Under Quasi-Static and Dynamic Impact Loads
1152. Rehman Saif, Riaz Raja, Usman Muhammad, Kim In-Ho (2024-08)
      Augmented Data-Driven Approach Towards 3D Printed Concrete Mix Prediction
1153. Dai Xiaodi, Tao Yaxin, Zhang Yi, Ding Luchuan et al. (2024-08)
      Development of 3D Printable Alkali-Activated Slag-Metakaolin Concrete
1154. Yu Qian, Zuo Qinxin, Zhang Yamei, Pan Jinlong (2024-08)
      An Investigation on Enhancing the Bonding Properties of 3D Printed Concrete Permanent Formwork and Post-Casted Concrete
1155. Reddy B., Sameer Sk, Ramesh V., Sriya B. et al. (2024-08)
      Sustainable Development of 3D Printable Quaternary Geopolymer Concrete
1156. Nguyen Vuong, Tran Jonathan, San Ha Ngoc, Xie Yi et al. (2024-08)
      Blast-Resistance of 3D Printed Bouligand Concrete Panels Reinforced with Steel-Fibers:
      Numerical Investigations
1157. Prathipati S., Vardhan J., Murali D., Nithin C. et al. (2024-08)
      An Experimental Study on the Effect of a Viscosity-Modifying-Agent on the Rheological and Strength Behavior of 3D Printed Concrete
1158. Dvorkin Leonid, Marchuk Vitaliy, Makarenko Ruslan (2024-08)
      Mechanochemical-Activated Fly-Ash Concrete Suitable for 3D Printing
1159. Liu Xiongfei, Cai Huachong, Sun Yuhang, Wang Li et al. (2024-08)
      Spray-Based 3D Printed Foam-Concrete:
      Cooperative Optimization for Lightweight and High-Strength Performance
1160. Şahin Hatice, Akgümüş Fatih, Mardani Ali (2024-08)
      Mechanical and Rheological Properties of Fiber‐Reinforced 3D Printable Concrete in Terms of Fiber Content and Aspect Ratio
1161. Zhi Yefan, Teng Teng, Akbarzadeh Masoud (2024-08)
      Designing 3D Printed Concrete Structures with Scaled Fabrication Models
1162. Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-08)
      Evaluation and Optimization of Micro-Calcium-Carbonate-Modified 3D Printed Rubber-Crumb Concrete
1163. Jia Lutao, Niu Geng, Dong Enlai, Jiang Yifan et al. (2024-08)
      Optimization-Strategy for Incorporating Recycled Brick-Powder in 3D Printed Concrete by Balancing Low-Carbon Footprint and Enhanced Performance
1164. Yuan Shuaihua, Duan Dengke, Sun Junbo, Yu Yi et al. (2024-08)
      Mechanical, Alkali Excitation, Hydrothermal Enhancement of 3D Printed Concrete Incorporated with Antimony-Tailings
1165. Glotz Theresa, Petryna Yuri (2024-08)
      Experimental Characterization of Anisotropic Mechanical Behavior and Failure-Mechanisms of Hardened Printed Concrete
1166. Li Xiaoteng, Newlands Moray, Jones Rod (2024-08)
      Performance of a Multi-Layer Aligned Steel-Fiber-Reinforced Concrete Beam:
      A Preliminary Investigation Towards 3D Printing
1167. Jiang Shangjin, Wang Yuntao, Hua Sudong, Yue Hongfei et al. (2024-08)
      Preparation and Performance Characterization of Low-Density 3D Printed Expanded Perlite-Foam-Concrete
1168. Huang Shuyi, Xu Weiguo, Anton Ana-Maria, Dillenburger Benjamin (2024-08)
      Self-Supporting Lamellae:
      Shape Variation Methods for the 3D Concrete Printing of Large Overhang Structures
1169. Xu Wen, Jiang Dengjie, Zhao Qian, Wang Linbing (2024-08)
      Study on Printability of 3D Printing Carbon-Fiber-Reinforced Eco-Friendly Concrete:
      Characterized by Fluidity and Consistency
1170. Klik Przemysław, Cisowski Adam, Rządkowski Witold, Pyrzanowski Paweł et al. (2024-08)
      Investigation of Mechanical Properties of Structures Created with Use of Automatically Reinforced 3D Concrete Printing:
      Preliminary Study
1171. Prem Prabhat, Ambily Parukutty, Kumar Shankar, Giridhar Greeshma et al. (2024-07)
      Structural Build-Up-Model for Three-Dimensional Concrete Printing Based on Kinetics-Theory
1172. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2024-07)
      Investigating the Interaction of Limestone-Calcined-Clay and OPC-Based Systems with a Methylhydroxyethyl-Cellulose-Based Viscosity-Modifier Used for 3D Printable Concrete
1173. Baghi Ali, Aminpour Nima, Memari Ali, Bilén Sven et al. (2024-07)
      3D Concrete Printing of Self-Supported Filaments via Entrained Cables:
      Constructing Formwork-Free Spanning Structures
1174. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wang Sizhe et al. (2024-07)
      Axial Performances of the Steel-Rebar-Reinforced Column Confined by the Steel-Cable-Reinforced 3D Concrete Printing Permanent Formwork
1175. Lyu Xin, Elchalakani Mohamed, Wang Xiangyu, Sun Junbo et al. (2024-07)
      Mechanical Performance and Anisotropic Analysis of Rubberised 3D Printed Concrete Incorporating PP-Fiber
1176. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2024-07)
      Influence of Curing Conditions on the Shrinkage Behavior of Three-Dimensional Printed Concrete Formwork
1177. Sucharda Oldřich, Gandel Radoslav, Cmiel Petr, Jeřábek Jan et al. (2024-07)
      Utilization of High-Performance Concrete Mixtures for Advanced Manufacturing Technologies
1178. Srinivas Dodda, Ventrapragada Durga, Panda Biranchi, Sitharam Thallak (2024-07)
      A Study on the Effect of Mixture Constituents on Washout-Resistance, Mechanical, and Transport Properties in the Context of Underwater 3D Concrete Printing
1179. Shahzad Qamar, Akbar Muhammad, Alzara Majed, Yosri Ahmed et al. (2024-07)
      Time-Dependent Buildability Evaluation of 3D Printed Concrete:
      Experimental Validation and Numerical Simulation
1180. Liu Nana, Gan Qili, Tao Qin, Wang Jie (2024-07)
      Research on Materials for Concrete (Mortar) 3D Printing Fabricated Components
1181. Kamakshi Tippabhotla, Thakur Manideep, Subramaniam Kolluru (2024-07)
      Formulating Printable Concrete Mixtures Based on Paste-Rheology and Aggregate-Content:
      Application to Alkali-Activated Binders
1182. Sahai Rajan, Bisht Ravindra, Singh Siddharth, Panigrahi Soraj (2024-07)
      Design-Analysis and Development of a Gantry Robot for Multi-Layer 3D Concrete Printing with Simulation and Experimental Validation
1183. Zhang Kaijian, Lin Wenqiang, Zhang Qingtian, Wang Dehui et al. (2024-07)
      Evaluation of Anisotropy and Statistical Parameters of Compressive Strength for 3D Printed Concrete
1184. Qiu Minghong, Qian Ye, Sun Yan, Leung Christopher (2024-07)
      Flexural Performance of Concrete Beams via 3D Printing Stay-in-Place Formwork Followed by Casting of Normal Concrete
1185. Liu Chao, Zhang Zedi, Jia Zijian, Cao Ruilin et al. (2024-07)
      Quantitative Characterization of Bubble-Stability of Foam-Concrete Throughout Extrusion-Process:
      From Yield-Stress , Viscosity and Surface Tension Point of View
1186. Hanratty Niall, Khan Mehran, McNally Ciaran (2024-07)
      The Role of Different Clay Types in Achieving Low-Carbon 3D Printed Concretes
1187. Silva João, Wagner Gabriel, Silva Rafael, Morais António et al. (2024-07)
      Real-Time Precision in 3D Concrete Printing:
      Controlling Layer Morphology via Machine Vision and Learning Algorithms
1188. Baktheer Abedulgader, Claßen Martin (2024-07)
      A Review of Recent Trends and Challenges in Numerical Modeling of the Anisotropic Behavior of Hardened 3D Printed Concrete
1189. Zhang Nan, Sanjayan Jay (2024-07)
      Pumping-Less 3D Concrete Printing Using Quick Nozzle Mixing
1190. Givkashi Mohammad, Tohidloo Mohammad (2024-07)
      The Effect of Freeze-Thaw-Cycles and Sulfuric-Acid-Attack Separately on the Compressive Strength and Microstructure of 3D Printed Air-Entrained Concrete
1191. Luo Qiling, Yu Ke-Ke, Long Wujian, Zheng Shuyi et al. (2024-07)
      Influence of Different Types of Superabsorbent Polymers on Fresh Mechanical Properties and Inter-Layer Adhesion of 3D Printed Concrete
1192. Mütevelli Özkan İffet, Aldemir Alper (2024-07)
      Machine-Learning Networks to Predict the Ultimate Axial Load and Displacement Capacity of 3D Printed Concrete Walls with Different Section Geometries
1193. Mitrović Stefan, Vidović Milica, Ignjatović Ivan, Dragaš Jelena (2024-07)
      Experimental Testing of 3D Printed Concrete Truss-Girder
1194. Malik Umair, Riaz Raja, Rehman Saif, Usman Muhammad et al. (2024-07)
      Advancing Mix-Design Prediction in 3D Printed Concrete:
      Predicting Anisotropic Compressive Strength and Slump-Flow
1195. Wu Yiwen, Liu Chao, Liu Huawei, Bai Guoliang et al. (2024-07)
      Mechanism of the Influence of Multi-Scale Pore-Structure on the Triaxial Mechanical Properties of 3D Printed Concrete with Recycled Sand
1196. Kloft Harald, Salamatian Ali, Gosslar Joschua, Dorresteijn Evelien et al. (2024-07)
      Robotic Rammed Earth-Concrete (RREC):
      A Novel Additive Manufacturing Technology to Strengthen Rammed Earth Structures by Integrated Rammed Concrete Parts
1197. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay (2024-07)
      Application of Textile Reinforcement for 3D Concrete Printed Structures
1198. Lin Xiqiang, Wang Hailong, Sun Xiaoyan, Kikhia Wael et al. (2024-07)
      Construction Technology of the Curved Mars House Digital Hotel Project in China Using Concrete 3D Printing
1199. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2024-07)
      Impact of Water to Solids Ratio on Stability, Printability, and Mechanical Characteristics of 3D Printable Foam-Concrete
1200. Markin Slava, Combrinck Riaan, Mechtcherine Viktor (2024-07)
      Specifics of Plastic Shrinkage in 3D Printed Concrete Elements
1201. Rehman Atta, Basha Shaik, Choi Kichang, Kang Manmin et al. (2024-07)
      An Analysis of Penetrometer-Test Methods for Structural Build-Up in Stiff and Accelerated 3D Concrete Printing Mixtures
1202. Mozaffari Salma, Kamravafar Rahasadat, Li Yunyan, Mata-Falcón Jaime et al. (2024-07)
      Leveraging Clay-Formwork 3D Printing for Reinforced-Concrete Construction
1203. Gerong Wangdui, Wang Pengfei, Liao Minmao, Chen Zhaohui et al. (2024-07)
      Interfacial Cracking at Layer and Filament Interfaces of 3D Printed Concrete:
      Experimental and Numerical Studies
1204. Lv Zhenyuan, Duan Zhenhua, Xiao Jianzhuang, Ji Guangchao (2024-07)
      Exploration of 3D Printed Concrete with Recycled Fine and Coarse Aggregates:
      Material, Equipment and Performance
1205. Chen Zhaohui, Wang Zhenyue, Liao Minmao, Sun Junbo et al. (2024-07)
      Influence of Printing-Pattern on Bearing-Capacity of 3D Printed Concrete Hollow Structures
1206. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-07)
      Set-on-Demand Geopolymer for Concrete 3D Printing Using Ternary Activator
1207. Liu Xuan, Chen Xianrui, Leung Gordon, Sham Ivan (2024-07)
      3D Printable Low-Carbon Concrete with Nano-Silica Pretreated Recycled Fine Aggregates
1208. Lim Sean, Tay Yi, Amr Issam, Fadhel Bandar et al. (2024-07)
      Carbon Sequestration with 3D Concrete Printing:
      Potentials and Challenges
1209. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-07)
      Two-Part Print-Head Mixing of Hybrid Alkali-Activated Cement for Buildability Enhancement in 3D Concrete Printing
1210. Lu Bing, Li Mingyang, Qian Shunzhi, Li King et al. (2024-07)
      High-Performance 3D Concrete Printing with Zeolite
1211. Quah Tan, Tay Yi, Tan Ming, Li King (2024-07)
      Evaluation of Extrusion-Methods for 3D Concrete Printing
1212. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Mechtcherine Viktor, Sanjayan Jay (2024-07)
      Alkali-Activated Waste Glass-Based Geopolymer Concrete for Digital Construction
1213. Wang Jinjin, Chen Cheng, Chu Tianwei, Jiang Liming et al. (2024-07)
      Experimental Study and OpenSees Modelling for Thermal Response of 3D Printed Concrete Exposed to Fires
1214. Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-07)
      CFD Simulation of Twin-Pipe Pumping Process for 3D Concrete Printing
1215. Zhang Xiaoyue, Huang Wanru, Chen Zhaohui (2024-07)
      Mechanical Behavior Investigation for the Timber-UHPC Shear Connector in 3D Printed Concrete-Based Composite Beam
1216. Cui Weijiu, Shen Liang, Ji Dongsheng, Liu Wenliang et al. (2024-07)
      Mechanical Performance and Permeability of Low-Carbon Printable Concrete
1217. Barve Prasad, Bahrami Alireza, Shah Santosh (2024-07)
      A Comprehensive Review on Effects of Material-Composition, Mix-Design, and Mixing-Regimes on Rheology of 3D Printed Geopolymer Concrete
1218. Şahin Hatice, Mardani Ali, Mardani Naz (2024-07)
      Performance Requirements and Optimum Mix Proportion of High-Volume Fly-Ash 3D Printable Concrete
1219. Bai Gang, Guan Jingyuan, Wang Li, Li Zhijian et al. (2024-07)
      Bending Performance of 3D Printed Ultra-High-Performance Concrete Composite Beams
1220. Lee Yoon, Lee Sang, Kim Jae, Jeong Hoseong et al. (2024-07)
      Inter-Layer Bond Strength of 3D Printed Concrete Members with Ultra-High-Performance Concrete Mix
1221. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
      Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete
1222. Ye Junhong, Zhuang Zicheng, Teng Fei, Yu Jie et al. (2024-07)
      Comparative Environmental-Assessment of 3D Concrete Printing with Engineered Cementitious Composites
1223. Cui Weijiu, Sun Haijun, Zhou Jiangang, Wang Sheng et al. (2024-07)
      Geometric Quality Evaluation of Three-Dimensional Printable Concrete Using Computational Fluid Dynamics
1224. Nhieu Nhat-Luong, Dang Tri (2024-07)
      An Integrated T-Spherical Fuzzy Einstein Interaction Aggregator Group Decision-Making Approach:
      A Case Study of Concrete 3D Printing Robot Application in Vietnam
1225. Butkutė Karolina, Vaitkevičius Vitoldas, Adomaitytė Fausta (2024-07)
      Eco-Friendly 3D Printed Concrete Made with Waste and Organic Artificial Aggregates
1226. He Lewei, Chen Bingzhi, Liu Qimin, Chen Hao et al. (2024-07)
      A Quasi-Exponential Distribution of Interfacial Voids and Its Effect on the Inter-Layer Strength of 3D Printed Concrete
1227. Rajeev Pathmanathan, Ramesh Akilesh, Navaratnam Satheeskumar, Sanjayan Jay (2024-07)
      Using Fiber Recovered from Face Mask Waste to Improve Printability in 3D Concrete Printing
1228. Sun Chang, Li Jiawang, Liu Qiong, Chen Kailun et al. (2024-07)
      Compressive Performance and Damage Mechanism of Concrete Short Columns Confined by Steel-Wires-Reinforced 3DPM
1229. Duarte Gonçalo, Brown Nathan, Duarte José (2024-07)
      Workflow for Generating, Simulating, and Optimizing Form and Tool-Path in 3D Concrete Printing of Vaults
1230. Bai Meiyan, Xiao Jianzhuang, Shen Jianyu, Ding Tao et al. (2024-07)
      Printability and Mechanical Anisotropy of 3D Printed Concrete with Manufactured Sand Derived from Basalt
1231. Villiers Wibke, Mwongo Mwiti, Babafemi Adewumi, Zijl Gideon (2024-06)
      Quantifying Recycled Construction and Demolition Waste for Use in 3D Printed Concrete
1232. Ramesh Akilesh, Rajeev Pathmanathan, Xu Shanqing, Sanjayan Jay et al. (2024-06)
      Impact Response of Textile-Reinforced 3D Printed Concrete Panels
1233. Shen Jing, Li Yujia, Zhang Xiaoman, Li Yangbo et al. (2024-06)
      Three-Dimensional Printable Concrete by an Ultra-Thin Nozzle and Fully-Sealed Extrusion
1234. Zhu Jinggao, Cervera Miguel, Ren Xiaodan (2024-06)
      Buildability of Complex 3D Printed Concrete Geometries Using Peridynamics
1235. Bong Shin, Du Hongjian (2024-06)
      Sustainable Additive Manufacturing of Concrete with Low-Carbon Materials
1236. Salaimanimagudam M., Jayaprakash Jaganathan (2024-06)
      Optimal Selection of Cable-Reinforcement for Concrete 3D Printed Lattice-Beam
1237. Aslani Farhad, Zhang Yifan (2024-06)
      Sustainable 3D Printed Concrete Structures Using High-Quality Secondary Raw Materials
1238. Seifan Mostafa (2024-06)
      Sustainable Three-Dimensional Printing Concrete:
      Advances, Challenges, and Future Direction
1239. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2024-06)
      Design for Early-Age Structural Performance of 3D Printed Concrete Structures:
      A Parametric Numerical Modeling Approach
1240. Quintana-Ruiz Osvaldo, Campello Eduardo (2024-06)
      DEM Modeling of Advanced Manufacturing Technologies:
      From SLS to 3D Concrete Printing
1241. Giwa Ilerioluwa, Dempsey Mary, Fiske Michael, Kazemian Ali (2024-06)
      3D Printed Sulfur-Regolith Concrete Performance Evaluation for Waterless Extraterrestrial Robotic Construction
1242. Hasani Alireza, Dorafshan Sattar (2024-06)
      Transforming Construction?:
      Evaluation of the State of Structural 3D Concrete Printing in Research and Practice
1243. Masoud Laith, Hammoud Ahmad, Mortada Youssef, Masad Eyad (2024-06)
      Rheological, Mechanical, and Microscopic Properties of Polypropylene-Fiber-Reinforced Geopolymer Concrete for Additive Manufacturing
1244. To Quoc, Pham Koa, Lee Gayoon, Shin Myoungsu et al. (2024-06)
      Experimental and FEM Evaluation of the Influence of Inter-Layer Bonding Strength in 3D Printed Concrete Members Under Compressive and Flexural Loadings
1245. Muy Yeakleang, Courard Luc, Garnavault Xavier, Bulteel David et al. (2024-06)
      Mechanical Properties and Freezing and Thawing Behavior of 3D Printing Concrete Containing Recycled Fine Aggregates from Construction and Demolition Waste
1246. Spencer Lawson, Genedy Moneeb, Strait James, Nair Sriramya et al. (2024-06)
      Concrete Gyroid:
      An Additive Manufacturing (AM) Method to 3D Print Gyroid Geometries with a Cementitious Material
1247. Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi, Kono Katsuya (2024-06)
      Influence of Print Paths on Mechanical Properties and Fracture Propagation of 3D Printed Concrete
1248. Ndarowa Tariro, Mahachi Jeffrey, Ikotun Bolane (2024-06)
      A Review of Optimization of Limestone and Calcined-Clay-Cement Concrete Mixtures for 3D Printing
1249. Sadakorn Wannapol, Prasertsuk Santirak, Prasittisopin Lapyote (2024-06)
      Improving the Structural Efficiency of Textured Three-Dimensional Concrete Printing Wall by Architectural Design
1250. Yang Chao, Xu Xinglong, Lei Zuxiang, Sun Junbo et al. (2024-06)
      Enhancing Mechanical Properties of Three-Dimensional Concrete at Elevated Temperatures Through Recycled Ceramic-Powder Treatment Methods
1251. Ostovari Shadi, Shayani Hooman (2024-06)
      Simulation and Analysis of Automated Generalised Interleaved Layered Execution (AGILE) Process for Concrete Shell-Structures
1252. Parmigiani Silvia, Falliano Devid, Moro Sandro, Ferro Giuseppe et al. (2024-06)
      3D Printed Multi-Functional Foamed Concrete Building Components:
      Material-Properties, Component Design, and 3D Printing Application
1253. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-06)
      Encapsulation of Sodium-Silicate to Attain on Demand Buildability Enhancement in Concrete 3D Printing
1254. Wang Changqing, Du Zicheng, Zhang Yu, Ma Zhiming (2024-06)
      Elaborating the 3D Microstructural Characteristics and Strength Softening Mechanical Mechanism of Fiber-Reinforced Recycled Aggregate Concrete
1255. Dong Liang, Yang Yekai, Liu Zhongxian, Zhang Yan et al. (2024-06)
      Interface Bonding Characteristics of 3D Printed Ultra-High-Performance Concrete After Elevated Temperatures
1256. Du Jiashuai, Wei Yazhi, Zhang Hui, Idriss Aboubaker (2024-06)
      Effects of Oyster-Shell-Derivatives on Performance Enhancement of Biomass-Based 3D Printed Concrete
1257. González-Fonteboa Belén, Seara-Paz Sindy, Caneda-Martínez Laura (2024-06)
      3D Printing Concrete with Byproducts
1258. Rama Krishna A., Mallik Mainak, Maity Damodar (2024-06)
      Developing an Appropriate Concrete Mix for 3D Concrete Printing
1259. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2024-06)
      Reinvent Reinforced Concrete with Robotics and 3D Printing
1260. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay, Mechtcherine Viktor (2024-06)
      In-Process Textile Reinforcement Method for 3D Concrete Printing and Its Structural Performance
1261. Lachmayer Lukas, Dittrich Lars, Recker Tobias, Dörrie Robin et al. (2024-06)
      In-Line Image-Based Reinforcement Detection for Concrete Additive Manufacturing Processes Using a Convolutional Neural Network
1262. Senthilnathan Shanmugaraj, Raphael Benny (2024-06)
      Buildability-Assessment of 3D Printed Concrete Elements Through Computer-Vision
1263. Zaki Ahmed, Carnevale Marco, Giberti Hermes, Schlette Christian (2024-06)
      Monitoring of 3D Concrete Printing Quality Through Multi-View RGB-D Images
1264. Birru Bizu, Rehman Atta, Kim Jung-Hoon (2024-06)
      Comparative Analysis of Structural Build-Up in One-Component Stiff and Two-Component Shotcrete-Accelerated Set-on-Demand Mixtures for 3D Concrete Printing
1265. Zhuang Zicheng, Xu Fengming, Ye Junhong, Hu Nan et al. (2024-06)
      A Comprehensive Review of Sustainable Materials and Tool-Path-Optimization in 3D Concrete Printing
1266. Thajeel Marwah, Sólyom Sándor, Balázs György (2024-05)
      Impact of Printing-Directions and Printing-Paths on the Compressive Strength of 3D Printed Concrete
1267. Maierdan Yierfan, Zhao Diandian, Choksi Pooja, Garmonina Maria et al. (2024-05)
      Rheology, 3D Printing, and Particle-Interactions of Xanthan-Gum-Clay Binder for Earth Concrete
1268. Gu Yucun, Khayat Kamal (2024-05)
      Extrudability Window and Off-Line Test-Methods to Predict Buildability of 3D Printing Concrete
1269. Mohamed Ibrahim, Senthil Kumar (2024-05)
      3D Printed Concrete Using Portland-Pozzolana-Cement:
      Fly-Ash-Based
1270. Taqa Ala, Mohsen Mohamed, Aburumman Mervat, Naji Khalid et al. (2024-05)
      Nano-Fly-Ash and Clay for 3D Printing Concrete Buildings:
      A Fundamental Study of Rheological, Mechanical and Microstructural Properties
1271. Skibicki Szymon, Federowicz Karol, Hoffmann Marcin, Chougan Mehdi et al. (2024-05)
      Potential of Reusing 3D Printed Concrete (3DPC) Fine Recycled Aggregates as a Strategy Towards Decreasing Cement Content in 3DPC
1272. Gu Yucun, Zheng Shuyi, Ma Hongyan, Long Wujian et al. (2024-05)
      Effect of Absorption Kinetics of Superabsorbent Polymers on Printability and Inter-Layer Bond of 3D Printing Concrete
1273. Berawi Mohammed, Sari Mustika, Oktaviani Astiti, Miraj Perdana et al. (2024-05)
      Impact of BIM and 3D Printing Technologies on Production Process and Productivity of Pre-Cast Concrete in Construction Project
1274. Liu Zhenbang, Li Mingyang, Wong Teck, Tan Ming (2024-05)
      Determine the Effects of Pore Properties on the Mechanical Performances of 3D Concrete Printing Units with Experimental and Numerical Methods
1275. Ghaderi Ehsan, Evans Pete, Doyle Shelby, Senske Nick et al. (2024-05)
      Hygrothermal Behavior of 3D Concrete Printed Wall Assemblies
1276. Wu Chengde, Evans Pete (2024-05)
      An Integrated System for Improving 3D Concrete Printing Process
1277. Otto Jens, Maiwald Patrick (2024-05)
      Classification and Automated Quality Assurance of 3D Concrete Printed Surfaces
1278. Kamakshi Tippabhotla, Subramaniam Kolluru (2024-05)
      Rheology-Control and 3D Concrete Printing with Fly Ash-Based Aqueous Nano-Silica Enhanced Alkali-Activated Binders
1279. Feng Xiaowei, Du Gaoming, Carvelli Valter, Lin Gongshun et al. (2024-05)
      Failure-Analysis of 3D Concrete Printing Bolted Laminates Mimicking Geological Strata
1280. Mohamed Rania, Mohamed Abdelaziz (2024-05)
      Exploring the Environmental Benefits of 3D Printing Technology in Concrete Construction:
      A Review
1281. Qiu Minghong, Qian Ye, Dai Jian-Guo (2024-05)
      Enhancing the Flexural Performance of Concrete Beams with 3D Printed UHP-SHCC Permanent Formwork via Graded Fiber Volume Fraction
1282. Deetman Arjen, Bos Derk, Blaakmeer Jan, Salet Theo et al. (2024-05)
      An In-Line Dye Tracer Experiment to Measure the Residence Time in Continuous Concrete Processing
1283. Bayatkashkooli Samira, Amirsardari Anita, Rajeev Pathmanathan, Sanjayan Jay et al. (2024-05)
      Investigation of Axial Load Capacity of 3D Printed Concrete Wall
1284. Gao Huaxing, Jin Lang, Chen Yuxuan, Chen Qian et al. (2024-05)
      Rheological Behavior of 3D Printed Concrete:
      Influential Factors and Printability Prediction Scheme
1285. Khan Mehran, McNally Ciaran (2024-05)
      Recent Developments on Low-Carbon 3D Printing Concrete:
      Revolutionizing Construction Through Innovative Technology
1286. Oulkhir Fatima, Akhrif Iatimad, Jai Mostapha (2024-05)
      3D Concrete Printing Success:
      An Exhaustive Diagnosis and Failure-Modes-Analysis
1287. Jhun Jihye, Lee Dong-Hyun, Rehman Atta, Kang Seungwoo et al. (2024-05)
      Development of a Real-Time Geometric Quality Monitoring System for Extruded Filaments of 3D Concrete Printing Construction
1288. An Dong, Zhang Yixia, Yang Chunhui (2024-05)
      Incorporating Coarse Aggregates into 3D Concrete Printing from Mixture Design and Process-Control to Structural Behavior and Practical Applications:
      A Review
1289. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2024-05)
      Effect of Time Interval on the Inter-Layer Adhesion of 3D Printed Concrete with Recycled Sand:
      Multi-Factor Influencing Mechanisms and Superabsorbent Polymer Enhancement
1290. Singh Aman, Digi Rohan, Mishra Ruby, Mohanty Rajiva et al. (2024-05)
      The Design and Development of a Low Cost 3D Concrete Printer
1291. Kajzr Daniel, Myslivec Tomáš, Černohorský Josef (2024-05)
      Modelling, Analysis and Comparison of Robot Energy Consumption for Three-Dimensional Concrete Printing Technology
1292. Stout Ivy, Godfrey Grant, Dayley Jenna, Rodriguez Dexter et al. (2024-05)
      Concrete Mixture Properties and Designs for Additive Manufacturing:
      A Review of 3D Concrete Printing
1293. Bayrak Alper, Shaban Nefize, Seyedian Choubi Sepehr, Tuncer Emran et al. (2024-05)
      Spatial Variation of Physical, Mechanical, and Thermophysical Properties of 3D Printed Concrete Across a Full-Scale Wall
1294. Breseghello Luca, Hajikarimian Hamed, Naboni Roberto (2024-05)
      3DLightSlab:
      Design to 3D Concrete Printing Workflow for Stress-Driven Ribbed Slabs
1295. Raval Amitkumar, Patel C. (2024-05)
      The Influence of Accelerators on Compressive Strength and Setting-Time of Cement to Achieve High Early Strength for 3D Concrete Printing Technology
1296. Zhou Boyu, Zhang Mo, Ma Guowei (2024-05)
      An Experimental Study on 3D Printed Concrete Reinforced with Fibers Recycled from Wind Turbine Blades
1297. Wangler Timothy, Vangen Kathrina, Burger Joris, Flatt Robert (2024-05)
      Digital Fabrication Material-Processing-Strategy for Bespoke Low-Clinker Mass-Concrete Components
1298. Han Yilong, Zhu Lin, Xue Rui, Liu Chenyu et al. (2024-05)
      Unpacking the Dynamics of 3D Concrete Printing Adoption:
      An Integrated UTAUT-TOE Approach
1299. Yuan Yong, Wang Xiaoyun, Zhang Jiao-Long, Tao Yaxin et al. (2024-05)
      The Shear Strength of the Interface Between Artificial Rock and Printed Concrete at Super Early-Ages
1300. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-05)
      Print-Head Mixing of Geopolymer and OPC Slurries for Hybrid Alkali-Activated Cement in 3D Concrete Printing
1301. Capêto Ana, Jesus Manuel, Uribe Braian, Guimarães Ana et al. (2024-05)
      Building a Greener Future:
      Advancing Concrete Production Sustainability and the Thermal Properties of 3D Printed Mortars
1302. Lyu Qifeng, Wang Yalun, Dai Pengfei (2024-05)
      Multilayered Plant-Growing Concrete Manufactured by Aggregate-Bed 3D Concrete Printing
1303. Vargas José, Sjölander Andreas, Westerlind Helena, Silfwerbrand Johan (2024-05)
      Internal Topology-Optimization of 3D Printed Concrete Structures:
      A Method for Enhanced Performance and Material-Efficiency
1304. Cheng Hanbin, Radlińska Aleksandra, Hilman Michael, Liu Feihong et al. (2024-05)
      Modeling Concrete-Deposition via 3D Printing Using Reproducing Kernel-Particle-Method
1305. Boddepalli Uday, Gandhi Indu, Panda Biranchi (2024-05)
      Synergistic Effect of Fly-Ash and Polyvinyl-Alcohol-Fibers in Improving Stability, Rheology, and Mechanical Properties of 3D Printable Foam-Concrete
1306. Wei Ying, Han Song, Yu Shiwei, Chen Ziwei et al. (2024-05)
      Parameter Impact on 3D Concrete Printing from Single to Multi-Layer Stacking
1307. Cavalcante Tiago, Toledo Filho Romildo, Mendoza Reales Oscar (2024-05)
      Influence of Recycled Concrete-Powder on Rheology of Printable Cement-Based Matrixes
1308. Tao Yaxin, Yuan Yong (2024-05)
      3D Concrete Printing for Tunnel Linings:
      Opportunities and Challenges
1309. Alcayaga Restelli Adolfo, Avudaiappan Siva, Arrué Muñoz Ramón, Canales Cristian et al. (2024-04)
      Tailings as a Sustainable Resource in 3D Printed Concrete for the Mining Industry:
      A Literature Review
1310. Salaimanimagudam M., Jayaprakash Jaganathan (2024-04)
      Effect of Introducing Dummy Layers on Inter-Layer Bonding and Geometrical Deformations in Concrete 3D Printing
1311. Chen Yuxuan, Zhang Longfei, Wei Kai, Gao Huaxing et al. (2024-04)
      Rheology-Control and Shrinkage-Mitigation of 3D Printed Geopolymer Concrete Using Nano-Cellulose and Magnesium-Oxide
1312. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-04)
      A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
1313. Lo Tzu-Hsien, Liu Bosheng (2024-04)
      Extruding Dredged-Based Material for Concrete Formwork through Rapid-Liquid-Printing
1314. Kim Il (2024-04)
      3D Concrete Printing Frame Structure in Granular Medium
1315. Heywood Kate, Nicholas Paul (2024-04)
      3D Concrete Printing in a Circular Economy:
      What We Can Learn from a 3DCP Slab Designed for Dissassembly
1316. Kim Il (2024-04)
      Density Gradient Concrete Fabrication with Injection 3D Gypsum Printing
1317. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-04)
      Concrete 3D Printing Technology for Sustainable Construction:
      A Review on Raw Material, Concrete Type and Performance
1318. Huang Tao, Peng Zhongqi, Wang Mengge, Feng Shuang (2024-04)
      Study on the Ionic Transport Properties of 3D Printed Concrete
1319. Yang Yekai, Lu Pengyuan, Liu Zhongxian, Dong Liang et al. (2024-04)
      Effect of Steel-Fiber with Different Orientations on Mechanical Properties of 3D Printed Steel-Fiber-Reinforced Concrete:
      Meso-Scale Finite-Element-Analysis
1320. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-04)
      Mitigation of Lack-of-Fusion in 3D Printed Limestone-Calcined-Clay-Cement Concrete Induced by Effective Micro-Organisms
1321. Mustafa Azamat, Storch Florian, Rustem Kairov, Plashnik Paul et al. (2024-04)
      Compensation Manipulator for Concrete 3D Printing Based on the CONPrint3D
1322. Duarte Gonçalo, Duarte José, Watson Nathan, Bilén Sven et al. (2024-04)
      Advancing 3D Concrete Printing for Extreme Environments:
      A Focus on Alaska
1323. Sun Bochao, Dominicus Randy, Dong Enlai, Li Peichen et al. (2024-04)
      Predicting the Strength Development of 3D Printed Concrete Considering the Synergistic Effect of Curing-Temperature and Humidity:
      From Perspective of Modified Maturity-Model
1324. Tao Yaxin, Zhou Jiangang, Cui Weijiu, Shi Xinyu et al. (2024-04)
      Numerical Assessment of Plastic Yielding in Extrusion-Based 3D Concrete Printing
1325. Uddin Md, Ye Junhong, Haque M., Yu Kequan et al. (2024-04)
      A Novel Compressive Strength Estimation Approach for 3D Printed Fiber-Reinforced Concrete:
      Integrating Machine Learning and Gene Expression Programming
1326. Yoshihara Rei, Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi et al. (2024-04)
      Evaluation of Aggregate-Distribution Heterogeneity in 3D Printed Concrete by Means of X-Ray CT
1327. Cutajar Sacha, Dielemans Gido, Krakovská Ema, Dorresteijn Evelien et al. (2024-04)
      Up-Scaling Earth Formworks:
      3D Printing-Strategies for Material-Optimized Reinforced Concrete Structures
1328. Radl Elisabeth, Pfleger Marc-Patrick, Karolyi Juliian, Vill Markus (2024-04)
      Specimen Design and Advanced Material-Testing for 3D Printing Concretes
1329. Pfleger Marc-Patrick, Radl Elisabeth, Esebali Osman, Vill Markus (2024-04)
      Load Bearing Behavior of 3D Printed Pre-Stressed Segmental Concrete Girders
1330. Balasubramanian Dhayalini, Sasikumar Athira, Govindaraj Vishnuvarthanan (2024-04)
      Study on Criticality of Coarse Aggregate Content on Early-Age Properties of 3D Printable Concrete
1331. Wang Yibo, Ren Changzai, Yan Ming, Ao Chenyang (2024-04)
      Blockage-Mechanism-Analysis and Optimization Design of 3D Concrete Print-Head
1332. Yang Liuhua, Gao Yang, Chen Hui, Jiao Huazhe et al. (2024-04)
      3D Printing Concrete Technology from a Rheology Perspective:
      A Review
1333. Xia Kailun, Chen Yuning, Chen Yu, Jia Zijian et al. (2024-04)
      Understanding and Modeling the Plastic Deformation of 3D Printed Concrete Based on Viscoelastic Creep Behavior
1334. Jia Zijian, Kong Lingyu, Jia Lutao, Ma Lei et al. (2024-04)
      Printability and Mechanical Properties of 3D Printing Ultra-High-Performance Concrete Incorporating Limestone-Powder
1335. Wei Ying, Han Song, Chen Ziwei, Lu Jianxian et al. (2024-04)
      Numerical Simulation of 3D Concrete Printing Derived from Printer Head and Printing Process
1336. Babafemi Adewumi, Norval Chris, Kolawole John, Paul Suvash et al. (2024-04)
      3D Printed Limestone-Calcined-Clay-Cement Concrete Incorporating Recycled Plastic-Waste:
      RESIN8
1337. Haar Bjorn, Kruger Jacques, Zijl Gideon (2024-04)
      Off-Site 3D Printed Concrete Beam Design and Fabrication
1338. Akbarzadeh Masoud, Chai Hua, Zhi Yefan, Ororbia Maximilian et al. (2024-04)
      Diamanti:
      3D Printed, Post-Tensioned Concrete Canopy
1339. Dell’Endice Alessandro, Bodea Serban, Mele Tom, Block Philippe et al. (2024-04)
      Striatus 2.0 Phoenix:
      Improving Circularity of 3D Concrete Printed Unreinforced Masonry Structures
1340. Anton Ana-Maria, Lin Che, Skevaki Eleni, Wang Mingyang et al. (2024-04)
      Tor Alva:
      A 3D Concrete Printed Tower
1341. Fleckenstein Julia, Knychalla Bruno, Briels David, Baghdadi Abtin et al. (2024-04)
      BREUER × AM:
      Functional Hybridisation in Concrete Building Envelope Elements through Additive Manufacturing
1342. Corneliusen Julie, Horswill Duncan (2024-04)
      Reshaping Fabrication:
      A Case Study in Designing Carbon-Reduced Concrete Structures
1343. Abbaoui Khalid, Korachi Issam, Jai Mostapha, Šeta Berin et al. (2024-04)
      3D Concrete Printing Using Computational Fluid Dynamics:
      Modeling of Material-Extrusion with Slip-Boundaries
1344. Wang Jun, Liu Zhenhua, Hou Jia, Ge Mengmeng (2024-04)
      Research-Progress and Trend-Analysis of Concrete 3D Printing Technology Based on CiteSpace
1345. Negron-McFarlane Christian, Kreiger Eric, Barna Lynette, Stynoski Peter et al. (2024-04)
      Development of In-Place Test-Methods for Evaluating Printable Concretes
1346. Tripathi Avinaya, Nair Sooraj, Chauhan Harshitsinh, Neithalath Narayanan (2024-04)
      Print Geometry Alterations and Layer-Staggering to Enhance Mechanical Properties of Plain and Fiber-Reinforced Three-Dimensional-Printed Concrete
1347. Geng Songyuan, Mei Liu, Cheng Boyuan, Luo Qilong et al. (2024-03)
      Revolutionizing 3D Concrete Printing:
      Leveraging Random-Forest-Model for Precise Printability and Rheological Prediction
1348. Ma Lei, Jia Zijian, Chen Yuning, Jiang Yifan et al. (2024-03)
      Water Loss and Shrinkage Prediction in 3D Printed Concrete with Varying w/b and Specimen Sizes
1349. Lu Yue, Xiao Jianzhuang, Li Yan (2024-03)
      3D Printing Recycled Concrete Incorporating Plant-Fibers:
      A Comprehensive Review
1350. Alhaidary Haidar (2024-03)
      Three-Dimensional Concrete Printing as a Construction-Automation-Strategy and Assessments from a Case Study Building
1351. Chamatete Kunda, Yalçınkaya Çağlar (2024-03)
      Numerical Evaluation on Thermal Performance of 3D Printed Concrete Walls:
      The Effects of Lattice-Type, Filament-Width and Granular-Filling-Material
1352. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo, Castano-Alvarez Ruben (2024-03)
      Effects of 3D Printing on the Tensile Splitting Strength of Concrete Structures
1353. Mechtcherine Viktor, Kuhn Alexander, Mai (née Dressler) Inka, Nerella Venkatesh et al. (2024-03)
      Additive Manufacturing with Concrete:
      Guidelines for Planning and Implementing Projects
1354. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-03)
      A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
1355. Zhang Hongping, Duan Shuni, Han Qi, He Qiangqiang et al. (2024-03)
      Strength and Proportioning Design of 3D Printed Concrete (3DPC) Based on Aggregate-Gradation-Optimization
1356. Rojas Jorge, Hasanzadeh Sognad (2024-03)
      Novel Digital Twin Architecture for 3D Concrete Printing in the AEC Industry
1357. Giwa Ilerioluwa, Herbert Marc, Lamendola Joseph, Fiske Michael et al. (2024-03)
      Planetary Robotic Construction Using Large-Scale 3D Printing with Sulfur-Concrete
1358. Chen Yidong, Zhang Yunsheng, Liu Zhiyong, Zhang Wenhua et al. (2024-03)
      Quantitative Surface Quality Evaluation for 3D Printed Concrete with Coarse Aggregate Through 3D Scanning
1359. Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-03)
      Optimization of Fiber-Reinforced Lightweight Rubber-Concrete Mix-Design for 3D Printing
1360. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2024-03)
      Durability and Pore-Structure of Metakaolin-Based 3D Printed Geopolymer Concrete
1361. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Li Xuesen et al. (2024-03)
      Development of a Novel Extrusion-Device to Improve the Printability of 3D Printable Geopolymer Concrete
1362. Gappmeier Peter, Reichenbach Sara, Kromoser Benjamin (2024-03)
      Advances in Formwork Automation, Structure and Materials in Concrete Construction
1363. Niu Geng, Liu Chao, Jia Lutao, Ma Lei et al. (2024-03)
      Preparation and Performance-Analysis of 3D Printed Lightweight EPS-Concrete:
      Insights from the Excess-Paste-Theory
1364. Latorraca Tássia, Guimarães Ana, Rangel Bárbara (2024-03)
      Bibliometric Analysis of Personalized 3D Printed Concrete-Based Modules for Construction:
      Leveraging the Ordinatio Method
1365. Shahzad Qamar, Abbas Nadeem, Akbar Muhammad, Sabi Ehab et al. (2024-03)
      Influence of Print-Speed and Nozzle-Diameter on the Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete
1366. Sun Junbo, Liu Shukui, Ma Zhangguo, Wang Di et al. (2024-03)
      3D Printed Lightweight Concrete Containing Surface-Pretreated Coal-Gangue
1367. Neef Tobias, Müller Steffen, Mechtcherine Viktor (2024-03)
      Integrating Continuous Mineral-Impregnated Carbon-Fibers into Digital Fabrication with Concrete
1368. Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
      Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete
1369. Tiwari Adarsh, Pratapa Phanisri, Santhanam Manu (2024-03)
      Lattice Concrete:
      3D Printed Periodic Cellular Structures Through Selective Cement-Hydration
1370. Shi Yifan, Jia Lutao, Jia Zijian, Ma Lei et al. (2024-03)
      Early-Age Inhomogeneous Deformation of 3D Printed Concrete:
      Characteristics and Influences of Superplasticizer and Water-Binder Ratio
1371. Wijaya Ignasius, Kreiger Eric, Masud Arif (2024-03)
      Modeling of Concrete Printing Process with Frictional Interface
1372. Ivaniuk Egor, Mechtcherine Viktor (2024-03)
      Approach for Production of Textile-Reinforced Beams and Slabs Using Three-Dimensional Concrete Printing
1373. Alhussain Ali, Duarte José, Brown Nathan (2024-02)
      Developing a Data-Driven Filament-Shape-Prediction-Model for 3D Concrete Printing
1374. Xiao Jianzhuang, Liu Haoran, Ding Tao, Yu Kequan et al. (2024-02)
      Rebar-Free Concrete Construction:
      Concept, Opportunities and Challenges
1375. Kaliyavaradhan Senthil, Ambily Parukutty, Shekar Deepadharshan, Sebastian Shilpa (2024-02)
      Effect of Sand-Gradations on the Fresh Properties of 3D Printable Concrete
1376. Zhou Yiyi, Luo Haoran, Anand Kamal, Singh Amardeep et al. (2024-02)
      Sustainable Use of Ultrafine Recycled Glass in Additive Manufactured Reactive-Powder Concrete
1377. Nan Cristina, Vigorito Alessio (2024-02)
      Exploring 3D Concrete Printing of Lattice Structures on Robotically-Shaped Sand Formwork for Circular Futures
1378. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-02)
      Concrete 3D Printing Technology in Sustainable Construction:
      A Review on Raw Materials, Concrete Types and Performances
1379. Ding Tao, Shen Kaige, Cai Chen, Xiao Jianzhuang et al. (2024-02)
      3D Printed Concrete with Sewage Sludge Ash:
      Fresh and Hardened Properties
1380. Wang Xingjian, Naito Clay, Fox John, Bocchini Paolo (2024-02)
      Impact of Mix Proportions on Particle-Bed 3D Printed Concrete Properties
1381. Colyn Markus, Zijl Gideon, Babafemi Adewumi (2024-02)
      Fresh and Strength Properties of 3D Printable Concrete Mixtures Utilising a High Volume of Sustainable Alternative Binders
1382. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay (2024-02)
      Bond-Slip Behavior of Textile-Reinforcement in 3D Printed Concrete
1383. Geng Songyuan, Luo Qiling, Cheng Boyuan, Li Lixao et al. (2024-02)
      Intelligent Multi-Objective Optimization of 3D Printing Low-Carbon Concrete for Multi-Scenario Requirements
1384. Şahin Hatice, Mardani Ali, Beytekin Hatice (2024-02)
      Effect of Silica-Fume Utilization on Structural Build-Up, Mechanical and Dimensional Stability Performance of Fiber-Reinforced 3D Printable Concrete
1385. Silva Guido, Quispe Axcel, Baldoceda Jordan, Kim Suyeon et al. (2024-02)
      Additive Construction of Concrete Deep Beams Using Low-Cost Characterization Methods and FEM-Based Topological Optimization
1386. Zeng Jun-Jie, Yan Zitong, Jiang Yuan, Li Pei-Lin (2024-02)
      3D Printing of FRP Grid and Bar Reinforcement for Reinforced Concrete Plates:
      Development and Effectiveness
1387. Zhang Hanghua, Tan Yanke, Hao Lucen, Zheng Shipeng et al. (2024-02)
      Intelligent Real-Time Quality-Control for 3D Printed Concrete with Near-Nozzle Secondary-Mixing
1388. Gamage Kumari, Fawzia Sabrina, Zahra Tatheer, Teixeira Muge et al. (2024-02)
      Advancement in Sustainable 3D Concrete Printing:
      A Review on Materials, Challenges, and Current Progress in Australia
1389. Susmel Luca (2024-02)
      Theory of Critical Distances and Notched Filament-Based 3D Printed Components:
      Lessons Learned from Polymers and Concrete
1390. Ahi Oğulcan, Ertunç Özgür, Bundur Zeynep, Bebek Özkan (2024-02)
      Automated Flow-Rate-Control of Extrusion for 3D Concrete Printing Incorporating Rheological Parameters
1391. Zhou Longfei, Gou Mifeng, Ji Jiankai, Hou Xinran et al. (2024-02)
      Durability and Hardened Properties of 3D Printed Concrete Containing Bauxite-Tailings
1392. Bhooshan Shajay, Dell’Endice Alessandro, Ranaudo Francesco, Mele Tom et al. (2024-02)
      Unreinforced Concrete Masonry for Circular Construction
1393. Jiang Xiongzhi, Li Yujia, Yang Zhe, Li Yangbo et al. (2024-02)
      Harnessing Path-Optimization to Enhance the Strength of Three-Dimensional Printed Concrete
1394. Nguyen Vuong, Tran Jonathan, Liu Junli, Tran Mien et al. (2024-02)
      Extended Finite Element Multi-Scale Modelling for Crack Propagation in 3D Printed Fiber-Reinforced Concrete
1395. Mahanthi S., Kantarao M., Uma Maheswara Rao S., Niharika M. et al. (2024-02)
      Sustainable Mix-Design for 3D Printable Concrete
1396. Li Yu, Wu Hao, Xie Xinjie, Zhang Liming et al. (2024-02)
      FloatArch:
      A Cable-Supported, Unreinforced, and Re-Assemblable 3D Printed Concrete Structure Designed Using Multi-Material Topology-Optimization
1397. Yang Min, Li Chao, Liu Hao, Huo Longfei et al. (2024-02)
      Exploring the Potential for Carrying Capacity and Reusability of 3D Printed Concrete Bridges:
      Construction, Dismantlement, and Reconstruction of a Box Arch Bridge
1398. Khan Shoukat, İlcan Hüseyin, Imram Ramsha, Aminipour Ehsan et al. (2024-01)
      The Impact of Nozzle-Diameter and Printing Speed on Geopolymer-Based 3D Printed Concrete Structures:
      Numerical Modeling and Experimental Validation
1399. Prem Prabhat, Ambily Parukutty, Kumar Shankar, Ghodke Swapnil (2024-01)
      A Theoretical Model to Predict the Structural Buildability of 3D Printable Concrete
1400. Mengistu Girum, Nemes Rita (2024-01)
      Recycling 3D Printed Concrete Waste for Normal Strength Concrete Production
1401. Delavar Mohammad, Chen H., Sideris Petros (2024-01)
      Analysis and Design of 3D Printed Reinforced Concrete Walls Under In-Plane Quasi-Static Loading
1402. Dulaj Albanela, Salet Theo, Lucas Sandra (2024-01)
      A Study of the Effects of MWCNTs on the Fresh and Hardened State Properties of 3D Printable Concrete
1403. Panțiru Alexandru, Luca Bogdan, Bărbuța Marinela (2024-01)
      Investigations Regarding Concrete Mixes Suitable for 3D Printing
1404. Rehman Atta, Kim Ik-Gyeom, Kim Jung-Hoon (2024-01)
      Towards Full Automation in 3D Concrete Printing Construction:
      Development of an Automated and In-Line Test-Method for In-Situ Assessment of Structural Build-Up and Quality of Concrete
1405. Roschli Alex, Borish Michael, Barnes Abby, Wang Peter et al. (2024-01)
      Tool-Path Considerations for Extrusion:
      Pellet, Filament, Concrete, and Thermoset
1406. Raut Jayant, Pimpalshende Anjusha, Chandak Mayuri, Patil Tejas et al. (2024-01)
      A Novel Multi-Method Framework for 3D Printed Fiber-Reinforced Polymer Concrete Utilizing Advance Additive Manufacturing Techniques
1407. Prihar Arjun, Garlock Maria, Najmeddine Aimane, Moini Mohamadreza (2024-01)
      Mechanical Performance of Sinusoidally Architected Concrete Enabled by Robotic Additive Manufacturing
1408. Polychronopoulos Nickolas, Sarris Ioannis, Vlachopoulos John (2024-01)
      Flow-Analysis of Screw-Extrusion in Three-Dimensional Concrete Printing
1409. Liu Xiongfei, Cai Huachong, Ma Guowei, Hou Guanyu (2024-01)
      Spray-Based 3D Concrete Printing-Parameter Design-Model:
      Actionable Insight for High Printing Quality
1410. Sahai Rajan, Bisht Ravindra, Malviya Nitesh, Kumar Shivam et al. (2024-01)
      Aspects of Waste-Material-Utilization and 3D Concrete Printer Development-Approach:
      A Review
1411. Tao Yaxin, Zhang Yi, Schutter Geert, Tittelboom Kim (2024-01)
      Interfacial Bonding of 3D Printable Concrete with Chemically Reactive Coating for Automatic Repair
1412. Fasihi Ali, Libre Nicolas (2024-01)
      From Pumping to Deposition:
      A Comprehensive Review of Test-Methods for Characterizing Concrete-Printability
1413. Pal Biswajit, Chourasia Ajay, Kapoor Ashish (2024-01)
      Intricacies of Various Printing Parameters on Mechanical Behavior of Additively Constructed Concrete
1414. Yu Hao, Zhang Weiwei, Yin Binbin, Sun Weikang et al. (2024-01)
      Modeling Extrusion-Process and Layer-Deformation in 3D Concrete Printing via Smoothed Particle-Hydrodynamics
1415. Tao Yaxin, Zhang Yi, Wang Xiaoyun, Godinho Jose et al. (2024-01)
      Adhesion Evaluation and Interface Characterization of 3D Printed Concrete for Automatic Repair
1416. Dong Wei, Wang Junfeng, Hang Meiyan, Qu Shuqiang (2024-01)
      Research on Printing Parameters and Salt-Frost-Resistance of 3D Printing Concrete with Ferrochrome-Slag and Aeolian Sand
1417. Özalp Fatih (2024-01)
      Mechanical Behavior and Permeability Properties of Sustainable and High-Performance Anisotropic Three-Dimensional Printable Concrete
1418. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-01)
      Experimental and Numerical Evaluation of Multi-Directional Compressive and Flexure Behavior of Three-Dimensional Printed Concrete
1419. Zhu Ronghua, Egbe King-James, Salehi Hadi, Shi Zhongtian et al. (2024-01)
      Eco-Friendly 3D Printed Concrete with Fine Aggregate Replacements:
      Fabrication, Characterization and Machine Learning Prediction
1420. Zhang Nan, Sanjayan Jay (2024-01)
      Quick Nozzle Mixing Technology for 3D Printing Foam-Concrete
1421. Tang Yuxiang, Xiao Jianzhuang, Ding Tao, Liu Haoran et al. (2024-01)
      Trans-Layer and Inter-Layer Fracture Behavior of Extrusion-Based 3D Printed Concrete Under Three-Point Bending
1422. Duan Zhenhua, Deng Qi, Xiao Jianzhuang, Lv Zhenyuan et al. (2024-01)
      Experimental Realization on Stress-Distribution Monitoring During 3D Concrete Printing
1423. Meere Hani, Yan Shuaxing, Wang Dongpo, Bi Yuzhang (2024-01)
      Behavior of Traditional Concrete Dams and Three-Dimensional Printed Concrete Dams Under the Debris Flow Impact
1424. Raza Saim, Triantafyllidis Zafiris, Anton Ana-Maria, Dillenburger Benjamin et al. (2024-01)
      Seismic Performance of Fe-SMA Pre-Stressed Segmental Bridge Columns with 3D Printed Permanent Concrete Formwork
1425. Westerlind Helena, Vargas José, Silfwerbrand Johan (2024-01)
      Towards the Application of Mesostructures in 3D Concrete Printing:
      Evaluating Load-bearing Performance
1426. Pham Thi, Trinh Duy, Do Trong, Huang Jie (2023-12)
      Flexural Behavior of Printed Concrete Wide Beams with Dispersed Fibers-Reinforced
1427. Ruitinga Volker, Avramiea Emma (2023-12)
      Custom-Made Print-Heads Empowering 3D Printed Concrete:
      Innovations in Digital Design and Fabrication of Complex Prefabricated Elements
1428. Li Haodao, Addai-NImoh Alfred, Kreiger Eric, Khayat Kamal (2023-12)
      Methodology to Design Eco-Friendly Fiber-Reinforced Concrete for 3D Printing
1429. Alyami Mana, Khan Majid, Javed Muhammad, Ali Mujahid et al. (2023-12)
      Application of Metaheuristic Optimization Algorithms in Predicting the Compressive Strength of 3D Printed Fiber-Reinforced Concrete
1430. Li Zihan, Liu Huanbao, Nie Ping, Cheng Xiang et al. (2023-12)
      Mechanical Properties of Concrete Reinforced with High-Performance Micro-Particles for 3D Concrete Printing
1431. Wang Li, Wang Fucheng, Li Rong, Wang Qiao (2023-12)
      Interfacial Constitutive Model of 3D Printed Fiber-Reinforced Concrete Composites and Its Experimental Validation
1432. Azimi Zahir, Mousavi Moein, Bengar Habib, Javadi Akbar (2023-12)
      Study on the Post-Fire Mechanical Properties of Lightweight 3D Printed Concrete Containing Expanded Perlite as Partial Replacement of Natural Sand
1433. Maitenaz Sébastien, Mesnil Romain, Féraille Adélaïde, Caron Jean-François (2023-12)
      Materialising Structural Optimization of Reinforced Concrete Beams Through Digital Fabrication
1434. Vasilić Ksenija (2023-12)
      Standardization Aspects of 3D Printing with Concrete
1435. Yan Zitong, Zeng Jun-Jie, Zhuge Yan, Liao Jinjing et al. (2023-12)
      Compressive Behavior of FRP-Confined 3D Printed Ultra-High-Performance Concrete Cylinders
1436. Yang Yan, Wu Hangzi, Han Lifang, Huang Qingling et al. (2023-12)
      Investigation on Geometric and Surface Finish Quality of 3D Concrete Printed Walls with Hollow Section
1437. Natanzi Atteyeh, McNally Ciaran (2023-12)
      Experimental Investigation of Low-Carbon 3D Printed Concrete
1438. Ambily Parukutty, Kaliyavaradhan Senthil, Sebastian Shilpa, Shekar Deepadharshan (2023-12)
      Mixing Approach for 3D Printable Concrete:
      Method of Addition and Optimization of Superplasticizer Dosage
1439. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2023-12)
      3D Concrete Printing in Air and Under Water:
      A Comparative Study on the Buildability and Inter-Layer Adhesion
1440. Christ Julian, Perrot Arnaud, Ottosen Lisbeth, Koss Holger (2023-12)
      Rheological Characterization of Temperature-Sensitive Biopolymer-Bound 3D Printing Concrete
1441. Liu Ke, Takasu Koji, Jiang Jinming, Zu Kun et al. (2023-12)
      Mechanical Properties of 3D Printed Concrete Components:
      A Review
1442. Qiu Minghong, Sun Yan, Qian Ye (2023-12)
      Interfacial Bonding Performance of 3D Printed Ultra-High-Performance Strain-Hardening Cementitious Composites and Cast Normal Concrete
1443. Warsi Syed, Panda Biranchi, Biswas Pankaj (2023-12)
      Exploring Fiber Addition Methods and Mechanical Properties of Fiber-Reinforced 3D Printed Concrete:
      A Review
1444. Dey Dhrutiman, Nguyen Vuong, Nguyen-Xuan Hung, Srinivas Dodda et al. (2023-12)
      Flexural Performance of 3D Printed Concrete Structure with Lattice-Infills
1445. Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
      Concrete Additive Manufacturing
1446. Suthar Mahendrabhai, Shariff Najeeb, Nanthagopalan Prakash (2023-12)
      Performance-Assessment of Topologically Optimised 3D Printable Concrete Sewer Cross-Section Using Finite Element Simulation
1447. Reißig Silvia, Bedolla Carolin, Meyer Tamara, Mechtcherine Viktor (2023-12)
      Rheological Behavior of Fiber-Reinforced LC3 Fine-Grained Concrete in the Context of Additive Manufacturing
1448. Gelbrich Sandra, Abstoß Marvin, Rudolph Enrico, Funke Henrik (2023-12)
      Complex Concrete Elements for the Production of Recyclable Formwork by Extrusion and Milling
1449. Straßer Alexander, Kränkel Thomas, Gehlen Christoph (2023-12)
      Integrating Wire Arc Additive Manufacturing into Selective Paste-Intrusion for Reinforced Concrete Elements:
      Effect of Temperature on the Mechanical Performance
1450. Warsi Syed, Srinivas Dodda, Panda Biranchi, Biswas Pankaj (2023-12)
      Investigating the Impact of Coarse Aggregate Dosage on the Mechanical Performance of 3D Printable Concrete
1451. Freund Niklas, David Martin, Böhler David, Mai (née Dressler) Inka et al. (2023-12)
      Shotcrete 3D Printing:
      Interaction of Nozzle Geometry, Homogeneity and Hardened Concrete Properties
1452. Eugenin Claudia, Cuevas Villalobos Karla, Navarrete Iván (2023-12)
      Temperature-Dependance of 3D Printed Concrete Produced with Copper-Tailings
1453. Coward Andy, Sørensen Jesper (2023-12)
      3D Printed Concrete Beams as Optimised Load Carrying Structural Elements:
      The Minimass Beam
1454. Kalthoff Matthias, Cruz Cynthia, Raupach Michael, Matschei Thomas (2023-12)
      Material‐Minimized Construction with Extruded Textile-Reinforced Concrete
1455. Funke Henrik, Lindner Marco, Rudolph Enrico, Gelbrich Sandra (2023-12)
      Additive Manufacturing Technology for the Continuous Production of Precision Concrete Elements
1456. Bos Derk, Wolfs Robert (2023-12)
      A Quality-Control Framework for Digital Fabrication with Concrete
1457. Qamar Mu'ath, Yaghmour Emad, Wang Xingjian, Naito Clay et al. (2023-12)
      Use of 3D Printed Concrete Components for Thermal Energy Storage
1458. Calderon-Cordova Carlos, Sarango Leonardo, Chamba Dennis, Sarango Roger et al. (2023-12)
      Performance-Analysis of Motion-Control-Algorithms of an Industrial-Robot-Arm Applied to 3D Concrete Printing Systems
1459. Pessoa Ana Sofia, Jesus Manuel, Rangel Carolina, Guimarães Ana et al. (2023-12)
      Preliminary Study of the Application of Thermal Mortar in 3D Printed Concrete Walls
1460. Vargas José (2023-12)
      Spatially Graded Modeling:
      An Integrated Workflow For 3D Concrete Printing
1461. Alyami Mana, Khan Majid, Fawad Muhammad, Nawahz R. et al. (2023-11)
      Predictive Modeling for Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Machine Learning Algorithms
1462. Teng Fei, Li Mingyang, Zhang Dong, Li Heng et al. (2023-11)
      BIM-Enabled Collaborative-Robots 3D Concrete Printing to Construct MiC with Reinforcement
1463. Ambily Parukutty, Rajendran Neeraja, Kaliyavaradhan Senthil (2023-11)
      Mix-Design, Optimization and Performance-Evaluation of Extrusion-Based 3D Printable Concrete
1464. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2023-11)
      Constitutive Response and Failure Progression in Digitally Fabricated 3D Printed Concrete Under Compression and Their Dependence on Print Layer-Height
1465. Peralta Abadi Patricia, Ahmad Muhammad, Smarsly Kay (2023-11)
      Printing-Information-Modeling for Additive Manufacturing of Concrete Structures
1466. Bosbach Sven, Kalthoff Matthias, Cruz Cynthia, Adam Viviane et al. (2023-11)
      Digital Prefabrication of Lightweight Building Elements for Circular Economy:
      Material-Minimised Ribbed Floor Slabs Made of Extruded Carbon Reinforced Concrete (ExCRC)
1467. Põldaru Mattias, Tammkõrv Karl, Tusik Tanel, Kiviste Mihkel et al. (2023-11)
      The Effect of Printing-Direction on the Strength Characteristics of a 3D Printed Concrete Wall-Section
1468. Koneswaran Bahirathan, Rajeev Pathmanathan, Sanjayan Jay (2023-11)
      Development of a Prototype Concept for Using 3D Concrete Printing in Pavement Construction
1469. Wang Xianlin, Banthia Nemkumar, Yoo Doo-Yeol (2023-11)
      Reinforcement Bond Performance in 3D Concrete Printing:
      Explainable Ensemble Learning Augmented by Deep Generative Adversarial Networks
1470. Khan Mehran, McNally Ciaran (2023-11)
      A Holistic Review on the Contribution of Civil Engineers for Driving Sustainable Concrete Construction in the Built Environment
1471. Liu Huawei, Liu Chao, Zhang Yamei, Bai Guoliang (2023-11)
      Bonding Properties Between 3D Printed Coarse Aggregate Concrete and Rebar Based on Interface Structural Characteristics
1472. Li Long, Hao Lucen, Li Xiao-Sheng, Xiao Jianzhuang et al. (2023-11)
      Development of CO2-Integrated 3D Printing Concrete
1473. Vignesh B., Parthasarathi N. (2023-11)
      Analytical Study on 3D Printed Concrete Wall with Different Wall-Configurations When Exposed to High Temperature
1474. Wu Hao, Li Yu, Xie Xingje, Gao Xiaofan et al. (2023-11)
      Structural Performance-Based 3D Concrete Printing for an Efficient Concrete Beam
1475. Burger Joris, Lloret-Fritschi Ena, Akerman Marc, Schwendemann Daniel et al. (2023-11)
      Circular Formwork:
      Recycling of 3D Printed Thermoplastic Formwork for Concrete
1476. Zhu Wenxuan, Zhu Shidong, Li Wangxin, Zhang Yu et al. (2023-11)
      A Study on the Printability of Manufactured Sand Concrete
1477. Maierdan Yierfan, Armistead Samuel, Mikofsky Rebecca, Huang Qiqi et al. (2023-11)
      Rheology and 3D Printing of Alginate Bio-Stabilized Earth Concrete
1478. Bui Van-Bien, Pham Thi, Pham Duc, Do Thi (2023-11)
      Accuracy Evaluation of Slump and Slump-Flow-Test for 3D Concrete Printing with the Kinect v1
1479. Lu Bing, Li Ziyang, Li Mingyang, Feng Jianhang et al. (2023-11)
      Substitution of Cement by Marine-Clay in Spray-Based 3D Concrete Printing
1480. Xu Ping, Chen Tianyu, Fan Kaijun, Zhang Minxia (2023-11)
      Effect of Nano-Silica-Sol Dosage on the Properties of 3D Printed Concrete
1481. Ungureanu Dragoș, Onuțu Cătălin, Țăranu Nicolae, Vornicu Nicoleta et al. (2023-11)
      Microstructure and Mechanical Properties of Cost-Efficient 3D Printed Concrete Reinforced with Polypropylene Fibers
1482. Tabassum Nusrat, Duarte José, Nazarian Shadi (2023-11)
      Advancing 3D Concrete Printing for Affordable Housing:
      A Shape Grammar-Based Approach to Print Spanning-Roof Structures
1483. Fu Yanan, Zhang Ying, Wu Lei (2023-11)
      Experimental Study on Structural Performance of Cast-in-Place Frame Printed Concrete Wall
1484. Reinold Janis, Daadouch Koussay, Meschke Günther (2023-11)
      Numerical Simulation of Three Dimensional Concrete Printing Based on a Unified Fluid and Solid Mechanics Formulation
1485. Naboni Roberto, Zomparelli Alessandro, Kunic Anja, Breseghello Luca (2023-11)
      Design, Robotic Fabrication and Augmented Construction of Low-Carbon Concrete Slabs Through Field-Based Reaction-Diffusion
1486. An Dong, Zhang Yixia, Yang Chunhui (2023-11)
      Numerical Modelling of 3D Concrete Printing:
      Material-Models, Boundary-Conditions and Failure-Identification
1487. Tamimi Adil, Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Alhaidary Haidar et al. (2023-11)
      Thermal Performance of 3D Concrete Printed Walls:
      Calculated and In-Situ Measured U-Values
1488. Zhao Zengfeng, Ji Chenyuan, Xiao Jianzhuang, Yao Lei et al. (2023-11)
      A Critical Review on Reducing the Environmental Impact of 3D Printing Concrete:
      Material-Preparation, Construction-Process and Structure-Level
1489. Tong Jiaqi, Ding Yahong, Lv Xiuwen, Ning Wei (2023-11)
      Effect of Carbonated Recycled Coarse Aggregates on the Mechanical Properties of 3D Printed Recycled Concrete
1490. Gao Huaxing, Chen Yuxuan, Chen Qian, Yu Qingliang (2023-11)
      Thermal and Mechanical Performance of 3D Printing Functionally Graded Concrete:
      The Role of SAC on the Rheology and Phase Evolution of 3DPC
1491. Zou Mengtong, Liu Chuanbei, Zhang Keying, Li Wuqian et al. (2023-11)
      Evaluation and Control of Printability and Rheological Properties of 3D Printed Rubberized Concrete
1492. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2023-10)
      The Effect of Curing Conditions on the Service Life of 3D Printed Concrete Formwork
1493. Lyu Qifeng, Dai Pengfei, Chen Anguo (2023-10)
      Mechanical Strengths and Optical Properties of Translucent Concrete Manufactured by Mortar-Extrusion 3D Printing with Polymethyl-Methacrylate Fibers
1494. Imram Ramsha, Rashid Ans, Khan Shoukat, İlcan Hüseyin et al. (2023-10)
      Buildability-Analysis on Squared Profile Structure in 3D Concrete Printing
1495. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-10)
      Comparative Studies of LC³- and Fly-Ash-Based Blended Binders in Fiber-Reinforced Printed Concrete:
      Rheological and Quasi-Static Mechanical Characteristics
1496. Miranda Luiza, Jovanović Balša, Lesage Karel, Schutter Geert (2023-10)
      Geometric Conformability of 3D Concrete Printing Mixtures from a Rheological Perspective
1497. Placzek Gerrit, Schwerdtner Patrick (2023-10)
      From Process to System:
      A Review on the Implications of Concrete 3D Printing on Project Delivery
1498. Zhou Yi, Althoey Fadi, Alotaibi Badr, Gamil Yaser et al. (2023-10)
      An Overview of Recent Advancements in Fiber-Reinforced 3D Printing Concrete
1499. Yang Wenwei, Wang Li, Hu Yuanyuan, Sanjayan Jay et al. (2023-10)
      An Integrated Topology-Optimization Method Including Manufacturing-Constraints for 3D Printed Fiber-Reinforced Concrete Structures
1500. Tay Yi, Lim Sean, Phua Seng, Tan Ming et al. (2023-10)
      Exploring Carbon-Sequestration-Potential Through 3D Concrete Printing
1501. Markin Slava, Mechtcherine Viktor (2023-10)
      The Effect of Layer Cross-Section on Plastic Shrinkage Cracking of 3D Printed Concrete Elements
1502. Markin Slava, Cordova Julian, Mechtcherine Viktor (2023-10)
      Evolution of Capillary Pressure in 3D Printed Concrete Elements:
      Numerical Modelling and Experimental Validation
1503. Skripkiūnas Gintautas, Girskas Giedrius, Rishko Lyudmyla (2023-10)
      Lightweight Portland Cement Mixtures with Perlite for 3D Printing of Concrete Structures
1504. Kumar Lalit, Panda Biranchi, Muthu Nelson (2023-10)
      A Simple Potential Energy Formulation for 3D Concrete Printed Structures Considering the Shear Effects in the Build-Direction
1505. Tarhan Yeşim, Şahin Remzi (2023-10)
      The Physicomechanical Behavior and Microstructure of Air-Entrained 3D Printable Concrete
1506. Christ Julian, Leusnik Sander, Koss Holger (2023-10)
      Multi-Axial 3D Printing of Biopolymer-Based Concrete Composites in Construction
1507. Hass Lauri, Nefs Karsten, Bos Freek, Salet Theo (2023-10)
      Application Potential of Combining Strain-Hardening Cementitious Composites and Helical Reinforcement for 3D Concrete Printed Structures:
      Case Study of a Spiral Staircase
1508. Wang Shih-Yuan, Liong Sze-Teng, Gan Y., Sheng Yu-Ting (2023-10)
      Cost-Effective Concrete Fabrication for Large Irregularly Shaped Architectural Structures
1509. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2023-10)
      Investigating PCM Encapsulated NaOH Additive for Set-on-Demand in 3D Concrete Printing
1510. Dittel Gözdem, Scheurer Martin, Evers Clara, Meyer-Brötz Fabian et al. (2023-10)
      Structural Performance of Textile Reinforced 3D Printed Concrete Elements
1511. Mata-Falcón Jaime, Gebhard Lukas, Lee Minu, Bischof Patrick (2023-10)
      Advances in Structural Applications of Digital Fabrication With Concrete
1512. Auer Daniel, Bos Freek, Olabi Mohammad, Fischer Oliver (2023-10)
      Fiber-Reinforcement of 3D Printed Concrete by Material-Extrusion-Tool-Paths Aligned to Principal Stress-Trajectories
1513. Perez-Rivera Anthony, Kreiger Eric, Stidwell Samuel, Stynoski Peter et al. (2023-10)
      Finite-Element Modeling of Reinforced Additively Constructed Concrete Structures
1514. Singh Amardeep, Wang Yufei, Zhou Yiyi, Sun Junbo et al. (2023-10)
      Utilization of Antimony-Tailings in Fiber-Reinforced 3D Printed Concrete:
      A Sustainable Approach for Construction Materials
1515. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-10)
      Influence of Rheology on Mixing Homogeneity and Mechanical Behavior of Twin-Pipe 3D Printable Concrete
1516. Pan Tinghong, Guo Rongxin, Fu Chaoshu, Ji Xuping et al. (2023-10)
      Extrusion-Based 3D Concrete Printing with Different Flow-Direction
1517. Oosthuizen Jandré, Babafemi Adewumi, Walls Richard (2023-10)
      3D Printed Recycled Plastic Eco-Aggregate (Resin8) Concrete
1518. Lyu Qifeng, Dai Pengfei, Zong Meirong, Zhu Pinghua et al. (2023-10)
      Plant-Germination Ability and Mechanical Strength of 3D Printed Vegetation Concrete Bound with Cement and Soil
1519. Curbach Manfred, Hegger Josef, Bielak Jan, Schmidt Christopher et al. (2023-10)
      New Perspectives on Carbon Reinforced Concrete Structures:
      Why New Composites Need New Design-Strategies
1520. Rui Aoyu, Wang Li, Lin Wenyu, Ma Guowei (2023-10)
      Experimental Study on Damage Anisotropy of 3D Printed Concrete Exposed to Sulfate-Attack
1521. Lv Zhenyuan, Xiao Jianzhuang, Duan Zhenhua, Tang Yuxiang (2023-09)
      Time-Dependent Evolution and Strength Modulation of 3D Printed Concrete Pore-Structure Based on Microbial Remediation
1522. Li Shuai, Lan Tian, Mendis Priyan, Tran Jonathan (2023-09)
      Robotics in 3D Concrete Printing:
      Current Progress & Challenges
1523. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-09)
      Effects of 3D Concrete Printing Phases on the Mechanical Performance of Printable Strain-Hardening Cementitious Composites
1524. Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
      A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
      From Analytical Modelling to Numerical Simulation
1525. Beckers Jakob, Kalthoff Matthias, Cruz Cynthia, Matschei Thomas (2023-09)
      Possibilities of Extrusion-Production in Concrete Construction
1526. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2023-09)
      Anisotropic Properties of Additively Manufactured Concrete Elements
1527. Breseghello Luca, Talaei Ardeshir, Florenzano Daniele, Naboni Roberto (2023-09)
      Shape-Env:
      Camera-Enhanced Robotic Terrain-Shaping for Complex 3D Concrete Printing
1528. Fleckenstein Julia, Bertagna Federico, Piccioni Valeria, Fechner Mareen et al. (2023-09)
      Revisiting Breuer Through Additive Manufacturing:
      Passive Solar-Control-Design-Strategies for Bespoke Concrete Building Envelope Elements
1529. Conrad John, Spencer Lawson, Amador Robert, Linnehan Tyler et al. (2023-09)
      Concrete Printed Gyroid Column:
      A Structurally Optimized, Sand Layer Supported Printing Method
1530. Coward Andy, Sørensen Jesper (2023-09)
      MINIMASS:
      A New Approach for Low-Carbon, Low-Cost 3D Printed Concrete Beams
1531. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2023-09)
      Rapid Early-Age Strength Development of In-Line Activated Geopolymer for Concrete 3D Printing
1532. Khademi Pooria, Toufigh Vahab (2023-09)
      Data-Driven-Based Ultrasonics-Analysis for Evaluating the Bond-Strength of Concrete-Layers
1533. Asensio Javier, Josa Irene, Monserrat Andrea, Fuente Albert (2023-09)
      3D‐Printed Concrete Footbridges:
      An Approach to Assess the Sustainability Performance
1534. Bong Shin, Nematollahi Behzad, Mechtcherine Viktor, Li Victor et al. (2023-09)
      3D Printed Engineered, Strain-Hardening Geopolymer Composite as Permanent Formwork for Construction of Reinforced Concrete Beam
1535. Ingle Vaibhav, Kaliyavaradhan Senthil, Ambily Parukutty, Shekar Deepadharshan (2023-09)
      3D Printable Concrete Without Chemical Admixtures:
      Fresh and Hardened Properties
1536. Liu Dawei, Zhang Zhigang, Zhang Xiaoyue, Chen Zhaohui (2023-09)
      3D Printing Concrete Structures:
      State of the Art, Challenges, and Opportunities
1537. Cuevas Villalobos Karla, Weinhold Joachim, Stephan Dietmar, Kim Ji-Su (2023-09)
      Effect of Printing-Patterns on Pore-Related Microstructural Characteristics and Properties of Materials for 3D Concrete Printing Using In-Situ and Ex-Situ Imaging-Techniques
1538. Kogai A., Puzatova (nee Sharanova) Anastasiia, Dmitrieva Maria (2023-09)
      Modification of Fine Multicomponent Concrete with Activated Component-Based Additive
1539. Yin Yunchao, Huang Jian, Wang Tiezhu, Yang Rong et al. (2023-09)
      Effect of Hydroxypropyl-Methylcellulose on Rheology and Printability of the First Printed Layer of Cement Activated Slag-Based 3D Printing Concrete
1540. Liu Zhenbang, Li Mingyang, Quah Tan, Wong Teck et al. (2023-09)
      Comprehensive Investigations on the Relationship Between the 3D Concrete Printing Failure Criterion and Properties of Fresh-State Cementitious Materials
1541. Liu Yi, Wang Li, Yuan Qiang, Peng Jianwei (2023-09)
      Effect of Coarse Aggregate on Printability and Mechanical Properties of 3D Printed Concrete
1542. Rymeš Jiří, Červenka Jan, Jendele Libor (2023-09)
      Material-Modelling and Simulation of 3D Concrete Printing Process
1543. Ingle Vaibhav, Prem Prabhat, Ramamurthy Vignesh, Ravichandran Darssni (2023-09)
      Acoustic Emission Characterization of 3D Printed Ultra-High-Performance Concrete Beams Under Bending
1544. Paritala Spandana, Kamakshi Tippabhotla, Subramaniam Kolluru (2023-09)
      Influence of Inter-Layer Interfaces on Fracture Behavior of 3D Printed Concrete
1545. Saravanan Pradeep, Ramaswamy Ananth (2023-09)
      Numerical Investigation on Inter-Layer and Filament Fracture Behavior of 3D Printed Concrete
1546. Christen Heidi, Zijl Gideon, Villiers Wibke, Moelich Migael (2023-09)
      Validated Simulation of Thermal Performance of Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
1547. Ramamurthy Vignesh, Prem Prabhat, Ingle Vaibhav, Giridhar Greeshma (2023-09)
      Fracture Characterization of 3D Printed Ultra-High-Performance Fiber Concrete Beams Using Acoustic Emission
1548. Chang Ze, Liang Minfei, Chen Yu, Schlangen Erik et al. (2023-09)
      Does Early-Age Creep Influence Buildability of 3D Printed Concrete?:
      Insights from Numerical Simulations
1549. Rehman Atta, Perrot Arnaud, Birru Bizu, Kim Jung-Hoon (2023-09)
      Recommendations for Quality-Control in Industrial 3D Concrete Printing Construction with Mono-Component Concrete:
      A Critical Evaluation of Ten Test-Methods and the Introduction of the Performance-Index
1550. Yue Hongfei, Zhang Zhuxian, Hua Sudong, Gao Yanan et al. (2023-09)
      Solid Waste-Based Set-on-Demand 3D Printed Concrete:
      Active Rheological-Control of Cement-Based Magneto-Rheological Fluids
1551. Polychronopoulos Nickolas, Sarris Ioannis, Benos Lefteris, Vlachopoulos John (2023-09)
      Pressure-Drop in Converging Flows in Three-Dimensional Printing of Concrete
1552. Lehr Leonard, Rasanani Mahdieh, Rasehorn Inken (2023-09)
      3D Concrete Printing of Wall Elements with Integrated Multifunctional Cavities
1553. Liu Xiaoshuang, Zou Yuxiao, Wu Yingxuan, Cui Dong et al. (2023-09)
      The Effect of U-Type Expanding Agent for Concrete (UEA) on the Microstructural and Mechanical Properties of Mortar Fabricated Through Alternate 3D Printing
1554. Thakur Manideep, Kulkarni Omkar, Kamakshi Tippabhotla, Paritala Spandana et al. (2023-09)
      Influence of Cold Joint on Fracture Behavior of 3D Printed Concrete
1555. Kulkarni Omkar, Thakur Manideep, Kamakshi Tippabhotla, Paritala Spandana et al. (2023-09)
      Evaluation of Tensile Behavior of 3D Printed Concrete Assemblies with Reinforcement
1556. Jendele Libor, Rymeš Jiří, Červenka Jan (2023-09)
      Optimizing Digital 3D Printing of Concrete Structures
1557. Quah Tan, Vo Tran, Tay Yi, Tan Ming et al. (2023-09)
      Real-Time-Assessment of Smart Concrete Inspection with Piezoelectric Sensors
1558. Ahmadi Khatereh, Mousavi Seyed, Dehestani Mehdi (2023-09)
      Influence of Nano-Coated Micro-Steel-Fibers on Mechanical and Self-Healing Properties of 3D Printable Concrete Using Graphene-Oxide and Polyvinyl-Alcohol
1559. Shahzad Qamar, Li Fangyuan (2023-09)
      An Innovative Method for Buildability-Assessment of 3D Printed Concrete at Early-Ages
1560. Rudziewicz Magdalena, Maroszek Marcin, Góra Mateusz, Dziura Paweł et al. (2023-09)
      Feasibility Review of Aerated Materials Application in 3D Concrete Printing
1561. Mader Thomas, Schreter-Fleischhacker Magdalena, Shkundalova Olena, Neuner Matthias et al. (2023-09)
      Constitutive Modeling of Orthotropic Non-Linear Mechanical Behavior of Hardened 3D Printed Concrete
1562. Chen Yidong, Zhang Yunsheng, Zhang Yu, Pang Bo et al. (2023-08)
      Influence of Gradation on Extrusion-Based 3D Printing Concrete with Coarse Aggregate
1563. Zuo Zibo, Corte Wouter, Huang Y., Zhang L. et al. (2023-08)
      Measurement of the Density of Formed Structures for Concrete 3D Printing
1564. Xie Xiangyu, Liu Xuemei, Ding Faxing, Zhang Lihai (2023-08)
      Characteristics and Mechanism of the Particle-Migration Subject to the Shear Flow of Concrete Flow Under Pressure
1565. Zhu Jinggao, Ren Xiaodan, Cervera Miguel (2023-08)
      Buildability Modeling of 3D Printed Concrete Including Printing-Deviation:
      A Stochastic Analysis
1566. Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2023-08)
      A 2D Numerical Model of 3D Concrete Printing Including Thixotropy
1567. Motalebi Arash, Khondoker Mohammad, Kabir Golam (2023-08)
      A Systematic Review of Life Cycle Assessments of 3D Concrete Printing
1568. Matos Paulo, Zat Tuani, Lima Marcelo, Neto José et al. (2023-08)
      Effect of the Superplasticizer-Addition Time on the Fresh Properties of 3D Printed Limestone-Calcined-Clay-Cement (LC³) Concrete
1569. Blagojevic Boris, Gienger Andreas, Nigl David, Blandini Lucio et al. (2023-08)
      Modeling, Feedforward-Control, and Constrained Trajectory-Generation for a Concrete-Conveyance-System
1570. Mani Aravindhraj, Muthukumar S., Sathyanarayanan K. (2023-08)
      Use of Alccofine 1203 as a Sustainable Supplementary Cementitious Material for Printable Concrete
1571. Paritala Spandana, Singaram Kailash, Bathina Indira, Khan Mohd et al. (2023-08)
      Rheology and Pumpability of Mix Suitable for Extrusion-Based Concrete 3D Printing:
      A Review
1572. Nadoury Wegdan, Mohamed Ashraf (2023-08)
      Modelling the Temperature Gradient in 3D Concrete Printing
1573. Federowicz Karol, Techman Mateusz, Skibicki Szymon, Chougan Mehdi et al. (2023-08)
      Development of 3D Printed Heavyweight Concrete Containing Magnetite-Aggregate
1574. Marcucci Andrea, Gaggiotti Cesare, Ferrara Liberato (2023-08)
      A Prediction of the Printability of Concrete Through Artificial Neural Networks
1575. Wang Yang, Qiu Liu-Chao, Hu Yan-Ye, Cheng Song-Gui et al. (2023-08)
      Influential Factors on Mechanical Properties and Microscopic Characteristics of Underwater 3D Printing Concrete
1576. Mogra Mihir, Asaf Ofer, Sprecher Aaron, Amir Oded (2023-08)
      Design-Optimization of 3D Printed Concrete Elements Considering Buildability
1577. Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2023-08)
      Advanced Measurement Techniques for Plastic Shrinkage and Cracking in 3D Printed Concrete Utilising Distributed Optical Fiber Sensor
1578. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi (2023-08)
      Experimental Study of the In-Situ Rebar-Splicing-Technique to Reinforce 3D Printed Concrete in Vertical Directions
1579. Surehali Sahil, Tripathi Avinaya, Neithalath Narayanan (2023-08)
      Anisotropy in Additively Manufactured Concrete Specimens Under Compressive Loading:
      Quantification of the Effects of Layer-Height and Fiber-Reinforcement
1580. Wang Qing, Ren Xiaodan, Li Jie (2023-08)
      Damage-Rheology Model for Predicting 3D Printed Concrete Buildability
1581. Ramani Ayyagari, Chen Qian, Soto Borja (2023-08)
      Quantifying the Impact of Concrete 3D Printing on the Construction Supply Chain
1582. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-08)
      Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer for 3D Concrete Printing Application:
      Evaluating Fresh and Hardened Properties
1583. Zhang Nan, Sanjayan Jay (2023-08)
      Surfactants to Enable Quick Nozzle Mixing in 3D Concrete Printing
1584. Du Longyu, Zhou Jiehang, Lai Jianzhong, Wu Kai et al. (2023-07)
      Effect of Pore-Structure on Durability and Mechanical Performance of 3D Printed Concrete
1585. Salah Husam, Mutalib Azrul, Kaish Amrul, Syamsir Agusril et al. (2023-07)
      Development of Ultra-High-Performance Silica-Fume-Based Mortar Incorporating Graphene-Nano-Platelets for 3D Concrete Printing Application
1586. Ghosh Debalina, Anleu Paula, Pape Yann, Ma Zhonggoue (2023-07)
      Effect of Inter-Layer-Time-Lapse and Workability-Retention on Printed Concrete Performance
1587. Ma Zongfang, Duan Ming, Liu Chao, Liu Huawei et al. (2023-07)
      Better Semantic Segmentation For 3D Printing Concrete Surface Pore Detection
1588. Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2023-07)
      Numerical Simulation of the Extrusion and Layer-Deposition-Processes in 3D Concrete Printing with the Particle-Finite-Element-Method
1589. Bai Gang, Chen G., Li Rong, Wang Li et al. (2023-07)
      3D Printed Ultra-High-Performance Concrete:
      Preparation, Application, and Challenges
1590. Zhang Yu, Yang Lin, Qian Rusheng, Liu Guojian et al. (2023-07)
      Inter-Layer Adhesion of 3D Printed Concrete:
      Influence of Layer Stacked Vertically
1591. Han Xiaoyu, Yan Jiachuan, Chen Tiefeng, Tang Boyang et al. (2023-07)
      Plastic Shrinkage of 3D Printed Concrete Under Different Self-Weight of Upper Layers
1592. Nguyen Ho, Thach Nguyen, Le Quang, Anh Yonghan (2023-07)
      A Review of Current Progress and Application of Machine Learning on 3D Printed Concrete
1593. Dang Thi, Tran Mien (2023-07)
      Variation of the Adhesion Between Concrete Printed Layers in a 3D Concrete Printed Structure
1594. Baldoceda Jordan, Silva Guido, Kim Suyeon, Ruiz Gaby et al. (2023-07)
      Preliminary Experimental Evaluation of Buildability Improvement Methods for Concrete for 3D Printing
1595. Zhang Nan, Sanjayan Jay (2023-07)
      Mechanisms of Rheological Modifiers for Quick Mixing Method in 3D Concrete Printing
1596. Jacquet Yohan, Perrot Arnaud (2023-07)
      Sewing Concrete Device:
      Combining In-Line Rheology-Control and Reinforcement-System for 3D Concrete Printing
1597. Armstrong Kristina, Kamath Dipti, Zhao Xianhui, Rencheck Mitchell et al. (2023-07)
      Life Cycle Cost, Energy, and Carbon Emissions of Molds for Pre-Cast Concrete:
      Exploring the Impacts of Material-Choices and Additive Manufacturing
1598. Geng Songyuan, Long Wujian, Luo Qiling, Fu Junen et al. (2023-07)
      Intelligent Prediction of Dynamic Yield-Stress in 3D Printing Concrete Based on Machine Learning
1599. Mollah Md., Comminal Raphaël, Silva Wilson, Šeta Berin et al. (2023-07)
      Computational Fluid Dynamics Modelling and Experimental Analysis of Reinforcement-Bar-Integration in 3D Concrete Printing
1600. Ravula Risheek, Gatheeshgar Perampalam (2023-07)
      On the Thermal-Energy Performance of 3D Printed Concrete Wall Panels Designed with Varying Insulation Ratios
1601. Pott Ursula, Jakob Cordula, Dorn Tobias, Stephan Dietmar (2023-07)
      Investigation of a Shotcrete-Accelerator for Targeted Control of Material-Properties for 3D Concrete Printing Injection-Method
1602. Almomani Mohammed, Ababneh Nedal, Abdalla Khairedin, Shbeeb Nadim et al. (2023-07)
      Selecting the Best 3D Concrete Printing Technology for Refugee Camp’s Shelter Construction Using Analytical Hierarchy Process:
      The Case of Syrian Refugees in Jordan
1603. Kanyenze Simba, Joubert Dawid, Combrinck Riaan (2023-07)
      The Effect of Nanobubble Water on the Fresh Properties of Conventional Concrete and 3D Printing Concrete
1604. Ghasemi Alireza, Naser Mohannad (2023-07)
      Tailoring 3D Printed Concrete Through Explainable Artificial Intelligence
1605. Pillay Selicia, Walls Richard, Merwe Johann (2023-07)
      Conceptualising the Behavior of 3D Printed Concrete Structures in Fire
1606. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-07)
      Hardened Properties of 3D Printed Limestone-Calcined-Clay-Cement Concrete
1607. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2023-07)
      Design-Optimization Workflow for 3D Concrete Printing of Spanning Structures
1608. Jami Guillaume, Jenny Ercan, Wei Chenguyan, Forsythe Hamilton et al. (2023-07)
      4D Formwork for Robotic Concrete Spraying
1609. Duarte José, Duarte Gonçalo, Brown Nathan, Nazarian Shadi et al. (2023-07)
      Designing a Habitat for 3D Concrete Printing in Permafrost-Regions
1610. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2023-07)
      In-Situ Coating Technique for Rebar Installation for 3D Printed Reinforced Concrete
1611. Wang Chaofan, Chen Bing, Vo Thanh, Rezania Mohammad (2023-07)
      Mechanical Anisotropy, Rheology and Carbon Footprint of 3D Printable Concrete:
      A Review
1612. Placzek Gerrit, Schwerdtner Patrick (2023-07)
      Concrete Additive Manufacturing in Construction:
      Integration Based on Component-Related Fabrication-Strategies
1613. Khan Shoukat, İlcan Hüseyin, Aminipour Ehsan, Şahin Oğuzhan et al. (2023-07)
      Buildability-Analysis on Effect of Structural Design in 3D Concrete Printing:
      An Experimental and Numerical Study
1614. Travush Vladimir, Bulgakov Alexey, Bock Thomas, Yu Wen-der et al. (2023-07)
      Mathematical Description of Concrete Laying Robots
1615. Breseghello Luca, Hajikarimian Hamed, Jørgensen Henrik, Naboni Roberto (2023-07)
      3DLightBeam+:
      Design, Simulation, and Testing of Carbon-Efficient Reinforced 3D Concrete Printed Beams
1616. Hu Rongbo, Pan Wen, Iturralde Kepa, Linner Thomas et al. (2023-07)
      Construction Automation and Robotics for Concrete Construction:
      Case Studies on Research, Development, and Innovations
1617. Senthilnathan Shanmugaraj, Raphael Benny (2023-07)
      Quality Monitoring of Concrete 3D Printed Elements Using Computer-Vision-Based Texture Extraction Technique
1618. McCoy Andrew, Vieira Manuel, Oliveira Miguel, Yanamala Akhileswar et al. (2023-07)
      3D Concrete Printing:
      Factors Affecting the US and Portugal
1619. Dell’Endice Alessandro, Bouten Sam, Mele Tom, Block Philippe (2023-07)
      Structural Design and Engineering of Striatus, an Unreinforced 3D Concrete Printed Masonry Arch Bridge
1620. Mousavi Seyed, Dehestani Mehdi (2023-07)
      On the Possibility of Using Waste-Disposable-Gloves as Recycled Fibers in Sustainable 3D Concrete Printing Using Different Additives
1621. Jaji Mustapha, Kamoru A., Zijl Gideon, Babafemi Adewumi (2023-07)
      Effect of Anisotropy on Permeability Index and Water-Absorption of 3D Printed Metakaolin-Based Geopolymer Concrete
1622. Zhu Jinggao, Ren Xiaodan, Cervera Miguel (2023-07)
      Peridynamic Buildability-Analysis of 3D Printed Concrete Including Damage, Plastic Flow and Collapse
1623. Kajzr Daniel, Myslivec Tomáš, Černohorský Josef (2023-07)
      An Open PLC-Based Robot-Control-System for 3D Concrete Printing
1624. Huang Shuyi, Xu Weiguo, Hu Hanyang (2023-06)
      Space-Filling and Print-Path-Generation-Methods for Large-Area 3D Concrete Printing Pavements
1625. Kalthoff Matthias, Bosbach Sven, Backes Jana, Cruz Cynthia et al. (2023-06)
      Fabrication of Lightweight, Carbon Textile Reinforced Concrete Components with Internally Nested Lattice Structure Using 2-Layer Extrusion by LabMorTex
1626. Tu Haidong, Wei Zhenyun, Bahrami Alireza, Kahla Nabil et al. (2023-06)
      Recent Advancements and Future Trends in 3D Printing Concrete Using Waste-Materials
1627. Zohrabyan Vahan, Zöller Raphael, Gradic Simon, Braml Thomas (2023-06)
      Potential of 3D Printed Steel Fiber Reinforced Concrete Components for the Protection of Critical Infrastructure:
      Impact and Free-Fall Tests
1628. Zhang Dan, Ma Guowei, Guan Jingyuan, Wang Li et al. (2023-06)
      Cyclic Behavior of Unbonded Post-Tensioned Pre-Cast Segmental Concrete Columns Fabricated by 3D Printed Concrete Permanent Formwork
1629. Riaz Raja, Usman Muhammad, Ali Ammar, Majid Usama et al. (2023-06)
      Inclusive Characterization of 3D Printed Concrete in Additive Manufacturing:
      A Detailed Review
1630. Alzarrad Ammar, Song Siyuan, Hatamleh Muhammad, Awolusi Ibukun et al. (2023-06)
      Guideline for Automated Construction of Reinforced Concrete Beams Using 3D Printing and BIM
1631. Cabibihan John-John, Gaballa Aya, Fadli Fodil, Irshidat Mohammad et al. (2023-06)
      A Guided Approach for Utilizing Concrete Robotic 3D Printing for the Architecture, Engineering, and Construction Industry
1632. Singh Narinder, Colangelo Francesco, Farina Ilenia (2023-06)
      Sustainable Non-Conventional Concrete 3D Printing:
      A Review
1633. Salaimanimagudam M., Jayaprakash Jaganathan (2023-06)
      Effect of Printing Parameters on Inter-Filament Voids, Bonding, and Geometrical Deviation in Concrete 3D Printed Structures
1634. Wolfs Robert, Bos Derk, Salet Theo (2023-06)
      Lessons Learned of Project Milestone:
      The First 3D Printed Concrete House in the Netherlands
1635. Zhang Daobo, Feng Peng, Zhou Peizhao, Xu Weiguo et al. (2023-06)
      3D Printed Concrete Walls Reinforced with Flexible FRP Textile:
      Automatic Construction, Digital Rebuilding, and Seismic Performance
1636. Robayo-Salazar Rafael, Martínez Fabio, Vargas Armando, Gutiérrez Ruby (2023-06)
      3D Printing of Hybrid Cements Based on High Contents of Powders from Concrete, Ceramic and Brick Waste Chemically Activated with Sodium Sulphate (Na2SO4)
1637. Mozaffari Salma, Bruce Mackenzie, Clune Gabrielle, Xie Ruxin et al. (2023-06)
      Digital Design and Fabrication of Clay Formwork for Concrete Casting
1638. Najvani Mohammad, Murcia Daniel, Soliman Eslam, Taha Mahmoud (2023-06)
      Early-Age Strength and Failure Characteristics of 3D Printable Polymer Concrete
1639. Sergis Vasileios, Ouellet-Plamondon Claudiane (2023-06)
      An Optimum Mix-Design Method for 3D Concrete Printing Applications
1640. Pfleger Marc-Patrick, Geyer Sebastian, Hölzl Christian, Vill Markus (2023-06)
      Investigations to Improve the Carbon Footprint of Thin Walled Concrete Structures by 3D Printing Prefabricated Elements
1641. Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo (2023-06)
      Rheological Behavior of 3D Printable Bio-Concretes Produced with Rice Husk
1642. Zhang Sisi, Kalus Matthias, Engel Sven, Hegger Josef et al. (2023-06)
      Development of an Innovative 3D Printing Process for Reinforced Concrete:
      AMoRC Method
1643. Munemo Rue, Kruger Jacques, Zijl Gideon (2023-06)
      Improving Inter-Layer Bond in 3D Printed Concrete Through Induced Thermo-Hydrokinetics
1644. Yang Wenwei, Wang Li, Ma Guowei, Feng Peng (2023-06)
      An Integrated Method of Topological-Optimization and Path-Design for 3D Concrete Printing
1645. Graser Konrad, Walzer Alexander, Hunhevicz Jens, Jähne René et al. (2023-06)
      Qualitative Technology Evaluation of Digital Fabrication with Concrete:
      Conceptual Framework and Scoreboard
1646. Heywood Kate, Nicholas Paul (2023-06)
      Sustainability and 3D Concrete Printing:
      Identifying a Need for a More Holistic Approach to Assessing Environmental Impacts
1647. Jones Kathryn, Li Mo (2023-06)
      Life Cycle Assessment of Ultra-Tall Wind Turbine Towers Comparing Concrete Additive Manufacturing to Conventional Manufacturing
1648. Chen Wei, Pan Jinlong, Zhu Binrong, Ma XiaoMeng et al. (2023-06)
      Improving Mechanical Properties of 3D Printable One-Part Geopolymer Concrete with Steel-Fiber-Reinforcement
1649. Dittel Gözdem, Dringenberg Steffen, Gries Thomas (2023-06)
      Through Textile to Reinforced 3D Concrete Printing
1650. Pressmair Nadine, Kromoser Benjamin (2023-06)
      Development-Stages of Structurally Optimized Concrete Girders:
      Design-Concepts, Material-Strategies and Experimental Investigation
1651. Richter Christiane, Jungwirth Jörg (2023-06)
      3D Concrete Printing:
      From Mechanical Properties to Structural Analysis
1652. Kruppa Henning, Kalthoff Matthias, Neef Tobias, Reißig Silvia et al. (2023-06)
      Alkali-Activated Binder-Requirements for Extrusion and 3D Printing of Carbon-Reinforced Concrete
1653. Miri Zahra, Polak Maria, Baaj Hassan (2023-06)
      Finite-Element-Analysis of Hardened Properties of 3D Printed Concrete
1654. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2023-06)
      Experimental Study on the Directional Dependency of 3D Printed Concrete in the Elastic Range
1655. Neef Tobias, Kalthoff Matthias, Müller Steffen, Backes Jana et al. (2023-06)
      Extrusion of High Yield Strength Carbon-Reinforced Concrete with Mineral Impregnated Rovings
1656. Neef Tobias, Dittel Gözdem, Scheurer Martin, Gries Thomas et al. (2023-06)
      Utilizing Textiles as Integrated Formwork for Additive Manufacturing with Concrete
1657. Hua Tianran, Lin Alexander, Poh Wen, Wong De et al. (2023-06)
      3D Printed Concrete Shear Keys:
      Design and Experimental Study
1658. Ali Ammar, Riaz Raja, Malik Umair, Abbas Syed et al. (2023-06)
      Machine-Learning-Based Predictive-Model for Tensile and Flexural Strength of 3D Printed Concrete
1659. Rahmat N., Ali Noorwirdawati, Abdullah Siti, Abdul Hamid Noor et al. (2023-06)
      Fresh Properties and Flexural Strength of 3D Printing Sustainable Concrete Containing GGBS as Partial Cement Replacement
1660. Abbaoui Khalid, Korachi Issam, Mollah Md., Spangenberg Jon (2023-06)
      Numerical Modelling of Planned Corner-Deposition in 3D Concrete Printing
1661. Pham Thi, Trinh Duy, Nguyen Thi, Do Trong et al. (2023-06)
      Study on Flexural Behavior of Printed Concrete Wide Beams Using Polypropylene-Fibers
1662. Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2023-05)
      Microstructure and Mechanical Properties of Inter-Layer Regions in Extrusion-Based 3D Printed Concrete:
      A Critical Review
1663. Sasikumar Athira, Balasubramanian Dhayalini, Senthil Kumaran M., Govindaraj Vishnuvarthanan (2023-05)
      Effect of Coarse Aggregate Content on the Rheological and Buildability Properties of 3D Printable Concrete
1664. Codarin Sara (2023-05)
      Enhancing the Workforce in Construction:
      Robotic Concrete Printing in Detroit
1665. Butkutė Karolina, Vaitkevičius Vitoldas, Šinka Māris, Augonis Algirdas et al. (2023-05)
      Influence of Carbonated-Bottom-Slag-Granules in 3D Concrete Printing
1666. Lyu Qifeng, Dai Pengfei, Chen Anguo (2023-05)
      Sandwich-Structured Porous Concrete Manufactured by Mortar-Extrusion and Aggregate-Bed 3D Printing
1667. Forcael Eric, Martínez-Chabur Paula, Ramírez-Cifuentes Iván, García-Alvarado Rodrigo et al. (2023-05)
      Performance-Analysis of 3D Concrete Printing Processes Through Discrete-Event-Simulation
1668. Fernandez Letízia, Caldas Lucas, Mendoza Reales Oscar (2023-05)
      Environmental Evaluation of 3D Printed Concrete Walls Considering the Life Cycle Perspective in the Context of Social Housing
1669. Ambily Parukutty, Kaliyavaradhan Senthil, Rajendran Neeraja (2023-05)
      Top Challenges to Widespread 3D Concrete Printing Adoption:
      A Review
1670. Samudrala Manideep, Mujeeb Syed, Lanjewar Bhagyashri, Chippagiri Ravijanya et al. (2023-05)
      3D Printable Concrete for Energy-Efficient Buildings
1671. Mujeeb Syed, Samudrala Manideep, Lanjewar Bhagyashri, Chippagiri Ravijanya et al. (2023-05)
      Development of Alkali-Activated 3D Printable Concrete:
      A Review
1672. Shahzad Qamar, Li Fangyuan (2023-05)
      The Influence of Print-Path on Early-Age Plastic Bearing-Capacity and Mechanical Behavior of 3D Printed Concrete:
      A Novel Approach for Practical Applications
1673. Dijkers Hugo, Simon George, Bos Freek, Salet Theo et al. (2023-05)
      Material-Characteristics of 3D Printed Concrete Subjected to Highly Dynamic Loading
1674. Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-05)
      Off-Site Construction with 3D Concrete Printing
1675. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-05)
      Wet Joint Performance of 3D Printed Concrete Beam Segments Under Flexural Loading
1676. Sun Guangcheng, Wang Zhiguang, Yu Chengkun, Qian Xiaoqian et al. (2023-05)
      Properties and Microstructures of 3D Printable Sulphoaluminate-Cement Concrete Containing Industrial Byproducts and Nano-Clay
1677. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Schutter Geert et al. (2023-05)
      Enhancing Mechanical Performance of Twin-Pipe Printable Concrete Using a Binary Binder System
1678. Liu Chao, Zhang Yamei, Banthia Nemkumar (2023-05)
      Unveiling Pore Formation and Its Influence on Micromechanical Property and Stress-Distribution of 3D Printed Foam-Concrete Modified with Hydroxypropyl-Methylcellulose and Silica-Fume
1679. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Muthukrishnan Shravan, Sanjayan Jay (2023-05)
      Effect of Magnetorheological Additives on the Buildability of 3D Concrete Printing
1680. Bhushan Jindal Bharat, Jangra Parveen (2023-05)
      3D Printed Concrete:
      A Comprehensive Review of Raw Material’s Properties, Synthesis, Performance, and Potential Field Applications
1681. Liu Zhenbang, Li Mingyang, Moo Guo, Kobayashi Hitoshi et al. (2023-05)
      Effect of Nano-Structured Silica-Additives on the Extrusion-Based 3D Concrete Printing Application
1682. Wang Li, Ye Kehan, Wan Qian, Li Zhijian et al. (2023-05)
      Inclined 3D Concrete Printing:
      Build-Up Prediction and Early-Age Performance-Optimization
1683. Mohan Manu, Rahul Attupurathu, Stappen Jeroen, Cnudde Veerle et al. (2023-05)
      Assessment of Pore-Structure Characteristics and Tortuosity of 3D Printed Concrete Using Mercury-Intrusion-Porosimetry and X-Ray Tomography
1684. Sobek Werner, Schmeer Daniel (2023-05)
      Graded Concrete (2. Generation):
      The Combination of Hollow-Core Construction with Trajectory-Based Reinforcement
1685. Chen Yidong, Zhang Yu, Liu Zhiyong, Zhang Yunsheng et al. (2023-04)
      3D Printed Concrete Permanent Formwork:
      Effect of Post-Cast Concrete Proportion on Interface Bonding
1686. Tao Yaxin, Lesage Karel, Schutter Geert, Tittelboom Kim (2023-04)
      Adhesion Studies in View of Automated Repair Using 3D Concrete Printing
1687. Vespalec Arnošt, Podroužek Jan, Koutný Daniel (2023-04)
      DoE Approach to Setting Input Parameters for Digital 3D Printing of Concrete for Coarse Aggregates up to 8 mm
1688. Wan Qian, Yang Wenwei, Wang Li, Ma Guowei (2023-04)
      Global Continuous Path-Planning for 3D Concrete Printing Multi-Branched Structure
1689. Fan Dingqiang, Zhu Jinyun, Fan Mengxin, Lu Jianxian et al. (2023-04)
      Intelligent Design and Manufacturing of Ultra-High-Performance Concrete:
      A Review
1690. Uddin Md, Ye Junhong, Deng Boyu, Li Lingzhi et al. (2023-04)
      Interpretable Machine Learning for Predicting the Strength of 3D Printed Fiber-Reinforced Concrete
1691. Gao Yanan, Hua Sudong, Yue Hongfei (2023-04)
      Study on Preparation and Rheological Properties of 3D Printed Pre-Foaming Concrete
1692. Razzaghian Ghadikolaee Mehrdad, Cerro-Prada Elena, Pan Zhu, Korayem Asghar (2023-04)
      Nanomaterials as Promising Additives for High-Performance 3D Printed Concrete:
      A Critical Review
1693. Yu Qian, Zhu Binrong, Li Xuesen, Meng Lingqi et al. (2023-04)
      Investigation of the Rheological and Mechanical Properties of 3D Printed Eco-Friendly Concrete with Steel-Slag
1694. Budiman Franky, Chandra Jimmy, Halim Alvin, Pudjisuryadi Pamuda (2023-04)
      Flexural and Shear Behavior of 3D Printed Reinforced Concrete Beams:
      An Experimental Study
1695. Zhao Yasong, Gao Yangyunzhi, Chen Gaofeng, Li Shujun et al. (2023-04)
      Development of Low-Carbon Materials from GGBS and Clay-Brick-Powder for 3D Concrete Printing
1696. Qu Zhengyao, Yu Qingliang, Ong Ghim, Cardinaels Ruth et al. (2023-04)
      3D Printing Concrete Containing Thermal Responsive Gelatin:
      Towards Cold Environment Applications
1697. Blagojevic Boris, Sawodny Oliver (2023-04)
      Path-Planning for Graded Concrete Element Fabrication
1698. Maurya Shubham, Dey Dhrutiman, Panda Biranchi, Dixit Uday (2023-04)
      In-Line Reinforcement of Steel-Cable in 3D Concrete Printing
1699. Delavar Mohammad, Chen Hao, Sideris Petros (2023-04)
      Seismic Design Methodology for 3D Printed Concrete Buildings
1700. Peav John, Hudson Ed, Summy Zachary, Violette Jon (2023-04)
      3D Concrete Printed Houses:
      Barriers to Adoption and Construction Practices
1701. Rekhi Jagruti, Stern Alaina (2023-04)
      3D Concrete Printed Construction:
      Building the Future of Housing, Layer-by-Layer
1702. Taleb Maria, Bulteel David, Betrancourt Damien, Roudet Francine et al. (2023-04)
      Interfacial Weakness Criterion by Indentation in 3D Printed Concrete
1703. Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2023-04)
      Probabilistic Prediction of Structural Failure During 3D Concrete Printing Processes
1704. Rajeev Pathmanathan, Ramesh Akilesh, Navaratnam Satheeskumar, Sanjayan Jay (2023-04)
      Using Fiber Recovered from Face Mask Waste to Improve Printability in 3D Concrete Printing
1705. Volpe Stelladriana, Sangiorgio Valentino, Petrella Andrea, Notarnicola Michele et al. (2023-04)
      3D Printed Concrete Blocks Made with Sustainable Recycled Material
1706. Fischer Oliver, Bos Freek (2023-04)
      Additive Manufacturing in Concrete Construction:
      Ways to Implement It in Engineering Practice
1707. Luo Jiaxiang, Gao Tianyi, Yuan Philip (2023-04)
      Fabrication of Reinforced 3D Concrete Printing Formwork
1708. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-03)
      Influence of Effective Micro-Organisms on the Rheology and Fresh State Properties of SCMs-Based Concrete for Digital Fabrication
1709. Markin Slava, Mechtcherine Viktor (2023-03)
      Quantification of Plastic Shrinkage and Plastic Shrinkage Cracking of the 3D Printable Concretes Using 2D Digital Image Correlation
1710. Seo Eun-A, Kim Won-Woo, Kim Sung-Wook, Kwon Hongkyu et al. (2023-03)
      Mechanical Properties of 3D Printed Concrete with Coarse Aggregates and Polypropylene-Fiber in the Air and Underwater Environment
1711. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2023-03)
      3D Printed Concrete with Recycled Sand:
      Pore-Structure and Triaxial Compression Properties
1712. Chen Hao, Zhang Daobo, Chen Peng, Li Ning et al. (2023-03)
      A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing
1713. Kazemian Ali, Seylabi Elnaz, Ekenel Mahmut (2023-03)
      Concrete 3D Printing:
      Challenges and Opportunities for the Construction Industry
1714. Cui Weijiu, Wang Tianheng, Chen Xu, Shen Wenkai et al. (2023-03)
      Study of 3D Printed Concrete with Low-Carbon Cementitious Materials Based on Its Rheological Properties and Mechanical Performances
1715. Chen Wei-Ting, Sunny Anthraper Liya, Skevaki Eleni, Reiter Lex et al. (2023-03)
      Imprinting Concrete Graded Transparency in 3D Concrete Printing Walls
1716. Huang Shuyi, Xu Weiguo, Yin Yudong (2023-03)
      Improving the Overhang of 3D Printed Concrete Shells by Wrinkle Structures
1717. Wu Hao, Gu Sijia, Gao Xiaofan, Luo Jiaxiang et al. (2023-03)
      Extrusion to Masoning:
      Robotic 3D Concrete Printing of Concrete Shells as Building Floor System
1718. Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
      Computational Modeling of Fiber Orientation During 3D Concrete Printing
1719. Chen Yanjuan, Kuva Jukka, Mohite Ashish, Li Zhongsen et al. (2023-03)
      Investigation of the Internal Structure of Hardened 3D Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance
1720. Tamimi Adil, Alqamish Habib, Khaldoune Ahlam, Alhaidary Haidar et al. (2023-03)
      Framework of 3D Concrete Printing Potential and Challenges
1721. Chen Yidong, Zhang Wenhua, Zhang Yunsheng, Zhang Yu et al. (2023-03)
      3D Printed Concrete with Coarse Aggregates:
      Built-In-Stirrup Permanent Concrete Formwork for Reinforced Columns
1722. Uddin Md, Mahamoudou Faharidine, Deng Boyu, Elobaid Musa Moneef et al. (2023-03)
      Prediction of Rheological Parameters of 3D Printed Polypropylene-Fiber-Reinforced Concrete by Machine Learning
1723. Sun Bochao, Li Peichen, Wang Dianchao, Ye Jun et al. (2023-03)
      Evaluation of Mechanical Properties and Anisotropy of 3D Printed Concrete at Different Temperatures
1724. Qureshi Mohsin, Shiwazi Amira, Kindi Ghassan, Sawafi Bushra et al. (2023-03)
      Development of Additive for Concrete 3D Printer by Using Local Materials
1725. Quah Tan, Tay Yi, Lim Jian, Tan Ming et al. (2023-03)
      Concrete 3D Printing:
      Process-Parameters for Process-Control, Monitoring and Diagnosis in Automation and Construction
1726. Yao Xiaofei, Lyu Xin, Sun Junbo, Wang Bolin et al. (2023-03)
      AI-Based Performance Prediction for 3D Printed Concrete Considering Anisotropy and Steam-Curing Condition
1727. Ravichandran Darssni, Giridhar Greeshma, Ramamurthy Vignesh, Prem Prabhat (2023-03)
      Influence of Test-Protocol on Determining the Rheological Properties of Cement-Pastes-Mixtures for Concrete 3D Printing
1728. Giridhar Greeshma, Prem Prabhat, Jiao Dengwu (2023-03)
      Effect of Varying Shear Rates at Different Resting Times on the Rheology of 3D Printable Concrete
1729. Dey Dhrutiman, Sahu Akshay, Prakash Srajan, Panda Biranchi (2023-03)
      A Study into the Effect of Material-Deposition-Methods on Hardened Properties of 3D Printed Concrete
1730. Bester Frederick, Kruger Jacques, Zijl Gideon (2023-03)
      Rivet Reinforcement for Concrete Printing
1731. Ding Tao, Wang Ziyue, Liu Haoran, Xiao Jianzhuang (2023-03)
      Simulation on Pull-Out Performance of Steel-Bar from 3D Printed Concrete
1732. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2023-03)
      Twin-Pipe Pumping-Strategy for Stiffening-Control of 3D Printable Concrete:
      From Transportation to Fabrication
1733. Anleu Paula, Wangler Timothy, Nerella Venkatesh, Mechtcherine Viktor et al. (2023-03)
      Using Micro-XRF to Characterize Chloride-Ingress Through Cold Joints in 3D Printed Concrete
1734. Khan Shoukat, Koç Muammer (2023-03)
      Buildability-Analysis of 3D Concrete Printing Process:
      A Parametric Study Using Design of Experiment-Approach
1735. Daadouch Koussay, Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
      Computational Modeling of Fiber Orientation During 3D Concrete Printing
1736. Kruger Jacques, Westhuizen Jean-Pierré (2023-03)
      Investigating the Poisson Ratio of 3D Printed Concrete
1737. Liu Haoran, Xiao Jianzhuang, Ding Tao (2023-03)
      Flexural Performance of 3D Printed Composite Beams with ECC and Recycled Fine Aggregate Concrete:
      Experimental and Numerical Analysis
1738. Nair Avinash, Aditya S., Adarsh R., Nandan M. et al. (2023-03)
      Additive Manufacturing of Concrete:
      Challenges and Opportunities
1739. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-03)
      Influence of Limestone-Calcined-Clay-Cement on Properties of 3D Printed Concrete for Sustainable Construction
1740. Rehman Atta, Melesse Birru, Kim Jung-Hoon (2023-02)
      Set-on-Demand 3D Concrete Printing Construction and Potential Outcome of Shotcrete-Accelerators on Its Hardened Properties
1741. Ma Guowei, Hu Tingyu, Wang Fang, Liu Xiongfei et al. (2023-02)
      Magnesium Phosphate Cement for Powder-Based 3D Concrete Printing:
      Systematic Evaluation and Optimization of Printability and Printing Quality
1742. Pan Zuanfeng, Si Doudou, Tao Jinghong, Xiao Jianzhuang (2023-02)
      Compressive Behavior of 3D Printed Concrete with Different Printing Paths and Concrete Ages
1743. Liu Chao, Wang Zhihui, Wu Yiwen, Liu Huawei et al. (2023-02)
      3D Printing Concrete with Recycled Sand:
      The Influence Mechanism of Extruded Pore-Defects on Constitutive Relationship
1744. Allameh Seyed, Miller Roger (2023-02)
      Evaluating the Structural Strength of Layered Concrete Reinforced with 3D-Welded Rebar
1745. Chen Yu, Liang Minfei, Zhang Yu, Li Zhenming et al. (2023-02)
      Can Superabsorbent Polymers Be Used as Rheology-Modifiers for Cementitious Materials in the Context of 3D Concrete Printing
1746. Lloret-Fritschi Ena, Choma Joseph, Scotto Fabio, Szabó Anna et al. (2023-02)
      In-Crease:
      Less Concrete More Paper
1747. Burger Joris, Aejmelaeus-Lindström Johan, Gürel Şeyma, Niketić Filip et al. (2023-02)
      Eggshell Pavilion:
      A Reinforced Concrete Structure Fabricated Using Robotically 3D Printed Formwork
1748. Tao Yaxin, Ren Qiang, Vantyghem Gieljan, Lesage Karel et al. (2023-02)
      Extending 3D Concrete Printing to Hard Rock Tunnel Linings:
      Adhesion of Fresh Cementitious Materials for Different Surface Inclinations
1749. Ishida Takato, Nakada Kiyofumi (2023-02)
      Review of Rheology in Cement-Based Materials and Its Application to 3D Printing Using Concrete
1750. Basha Shaik, Rehman Atta, Aziz Md, Kim Jung-Hoon (2023-02)
      Cement Composites with Carbon-Based Nanomaterials for 3D Concrete Printing Applications:
      A Review
1751. Zhang Ruo-Chen, Wang Li, Xue Xuan, Ma Guowei (2023-02)
      Environmental Profile of 3D Concrete Printing Technology in Desert Areas via Life Cycle Assessment
1752. Bedarf Patrick, Calvo Barentin Cristian, Schulte Dinorah, Şenol Ayça et al. (2023-02)
      Mineral Composites:
      Stay-in-Place Formwork for Concrete Using Foam 3D Printing
1753. Allameh Seyed, Allameh Hadi, Miller Roger, Lenihan Avery et al. (2023-02)
      On the 3D Printing of Reinforced Concrete
1754. Li Xiao-Sheng, Li Long, Zou Shuai (2023-02)
      Developing Low-pH 3D Printing Concrete Using Solid Wastes
1755. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-02)
      Parametric Modelling of 3D Printed Concrete Segmented Beams with Rebars Under Bending Moments
1756. Christen Heidi, Zijl Gideon, Villiers Wibke (2023-02)
      Improving Building Thermal Comfort Through Passive Design:
      An Experimental Analysis of Phase-Change-Material 3D Printed Concrete
1757. Baghdadi Abtin, Ledderose Lukas, Ameri Shaghayegh, Kloft Harald (2023-02)
      Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of Robotic CNC Manufacturing Technique
1758. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-02)
      Development of a Calcium Sulfoaluminate-Portland Cement Binary System for Twin-Pipe 3D Concrete Printing
1759. Zijl Gideon, Heever Marchant, Cho Seung (2023-01)
      SHCC Reinforced 3D Printed Concrete
1760. Oval Robin, Nuh Mishael, Costa Eduardo, Madyan Omar et al. (2023-01)
      A Prototype Low-Carbon Segmented Concrete Shell Building Floor System
1761. Taleb Maria, Bulteel David, Betrancourt Damien, Roudet Francine et al. (2023-01)
      Multi-Scale Mechanical Characterization of the Interface in 3D Printed Concrete
1762. Alabbasi Mohammad, Agkathidis Asterios, Chen Hanmei (2023-01)
      Robotic 3D Printing of Concrete Building Components for Residential Buildings in Saudi Arabia
1763. Xiao Jianzhuang, Hou Shaodan, Duan Zhenhua, Zou Shuai (2023-01)
      Rheology of 3D Printable Concrete Prepared by Secondary Mixing of Ready-Mix Concrete
1764. Tran Mien, Vu Tran, Nguyen Thi (2023-01)
      Simplified Assessment for One-Part 3D Printable Geopolymer Concrete Based on Slump and Slump-Flow Measurements
1765. Wang Yuxin, Aslani Farhad, Dyskin Arcady, Pasternak Elena (2023-01)
      Digital Twin Applications in 3D Concrete Printing
1766. Zhao Kang, Hu Zhongjun, Wang Boxin, Li Quanheng et al. (2023-01)
      Effect of Roughness and Adhesive on the Strength of Concrete-to-Concrete Interfaces Cast from 3D Printed Prefabricated Plastic Formworks
1767. Yang Yekai, Wu Chengqing, Liu Zhongxian (2023-01)
      Rate-Dependent Behavior of 3D Printed Ultra-High-Performance Fiber-Reinforced Concrete Under Dynamic Splitting Tensile
1768. Sambucci Matteo, Biblioteca Ilario, Valente Marco (2023-01)
      Life Cycle Assessment (LCA) of 3D Concrete Printing and Casting Processes for Cementitious Materials Incorporating Ground Waste Tire Rubber
1769. Vijayalaxmi Jeyasingh, Singh Parth (2023-01)
      Comparative Analysis of Concrete 3D Printing and Conventional Construction Technique for Housing
1770. Poudelet Louison, Molina Miguel, Calvo Laura, Cardona Roger et al. (2023-01)
      Comparison Between Mono- and Bi-Component Extruders in Concrete Additive Manufacturing
1771. Giridhar Greeshma, Prem Prabhat, Kumar Shankar (2023-01)
      Development of Concrete Mixes for 3D Printing Using Simple Tools and Techniques
1772. Markin Slava, Mechtcherine Viktor (2023-01)
      Methods for Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concrete
1773. Gebhard Lukas, Mata-Falcón Jaime, Iqbal Arsalan, Kaufmann Walter (2023-01)
      Structural Behavior of Post-Installed Reinforcement for 3D Concrete Printed Shells:
      A Case Study on Water Tanks
1774. Malipeddi Reshma, Adiseshu S. (2023-01)
      Impact of Unique Mixing Methodology on Macro and Microstructural Characteristics of Concrete Containing Slag and Fly-Ash
1775. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2023-01)
      3D Concrete Printing of Eco-Friendly Geopolymer Containing Brick Waste
1776. Baghdadi Abtin, Heristchian Mahmoud, Ledderose Lukas, Kloft Harald (2023-01)
      Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of the Robotic Subtractive Manufacturing Technique
1777. Ahmed Ghafur (2023-01)
      A Review of 3D Concrete Printing:
      Materials and Process Characterization, Economic Considerations and Environmental Sustainability
1778. Zhang Nan, Sanjayan Jay (2023-01)
      Extrusion Nozzle Design and Print Parameter Selections for 3D Concrete Printing
1779. Mendřický Radomír, Keller Petr (2023-01)
      Analysis of Object-Deformations Printed by Extrusion of Concrete-Mixtures Using 3D-Scanning
1780. Arunothayan Arun, Sanjayan Jay (2023-01)
      Elevated Temperature Effects on 3D Printed Ultra-High-Performance Concrete
1781. Surehali Sahil, Tripathi Avinaya, Nimbalkar Atharwa, Neithalath Narayanan (2023-01)
      Anisotropic Chloride Transport in 3D Printed Concrete and Its Dependence on Layer-Height and Interface-Types
1782. Raphael Benny, Senthilnathan Shanmugaraj, Patel Abhishek, Bhat Saqib (2023-01)
      A Review of Concrete 3D Printed Structural Members
1783. Joon Hillar, Hass Lauri, Peetrimägi Lauri (2023-01)
      Influence of Limestone-Filler on Technological Parameters of Mixtures for 3D Concrete Printing
1784. Spuriņa Ella, Šinka Māris, Ziemelis Krists, Bajāre Diāna (2023-01)
      The Effects of 3D Printing on Frost-Resistance of Concrete
1785. Bello Nicholas, Memari Ali (2022-12)
      Comparative Review of the Technology and Case Studies of 3D Concrete Printing of Buildings by Several Companies
1786. Cao Chenyu, Sun Dongsheng, Xian Zhijun, Zhang Hengyu (2022-12)
      A Brief Review of 3D Printed Concrete
1787. Noaimat Yazeed, Ghaffar Seyed, Chougan Mehdi, Kheetan Mazen (2022-12)
      A Review of 3D Printing Low-Carbon Concrete with One-Part Geopolymer:
      Engineering, Environmental and Economic Feasibility
1788. Uddin Md (2022-12)
      Influence of 3D Printable Sustainable Concrete and Industrial Waste on Industry 5.0
1789. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Pereira Eduardo et al. (2022-12)
      Influence of the Printing-Direction and Age on the Mechanical Properties of 3D Printed Concrete:
      Correction
1790. Shanmugan S., Sandhyarani T., Palani Subbaiya (2022-12)
      Development of 3D Concrete Printing Using Additive Manufacturing Processes for Construction and Building Industry
1791. Nováková Kateřina, Vele Jiří, Litoš Jiří, Šána Vladimír (2022-12)
      Prvok:
      Issue on 3D Printing Concrete Building
1792. Yang Jun-Mo, Park In-Beom, Lee Hojae, Kwon Hongkyu (2022-12)
      Effects of Nozzle Details on Print Quality and Hardened Properties of Underwater 3D Printed Concrete
1793. Zahrani Abdullah, Alghamdi Abdulrahman, Basalah Ahmad (2022-12)
      Computational Optimization of 3D Printed Concrete Walls for Improved Building Thermal Performance
1794. Shen Yuhang, Lin Li, Wei Shengjie, Yan Jie et al. (2022-12)
      Research on the Preparation and Mechanical Properties of Solidified 3D Printed Concrete Materials
1795. Boddepalli Uday, Gandhi Indu, Panda Biranchi (2022-12)
      Stability of Three-Dimensional Printable Foam-Concrete as Function of Surfactant Characteristics
1796. Zhao Shun, Wang Qiang, Fang Xinjun, Liang Wei et al. (2022-12)
      Application and Development of Autonomous Robots in Concrete Construction:
      Challenges and Opportunities
1797. Naboni Roberto, Breseghello Luca (2022-12)
      Additive Formwork:
      Examining Design, Fabrication Space and Resolution for Bespoke Concrete Elements
1798. Yang Liming, Sepasgozar Samad, Shirowzhan Sara, Kashani Alireza et al. (2022-12)
      Nozzle Criteria for Enhancing Extrudability, Buildability and Inter-Layer Bonding in 3D Printing Concrete
1799. Dvorkin Leonid, Konkol Janusz, Marchuk Vitaliy, Huts Andriy (2022-12)
      Effectiveness of Polymer Additives in Concrete for 3D Concrete Printing Using Fly-Ash
1800. Bischof Patrick, Mata-Falcón Jaime, Ammann Rebecca, Näsbom Andreas et al. (2022-12)
      Digitally Fabricated Weak Interfaces to Reduce Minimum Reinforcement in Concrete Structures
1801. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-12)
      Influence of the Pore Feature on the Water-Uptake in 3D Printed Concrete
1802. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2022-12)
      Assessing Printing Synergism in a Dual 3D Printing System for Ultra-High-Performance Concrete In-Process Reinforced Cementitious Composite
1803. Placzek Gerrit, Schwerdtner Patrick (2022-12)
      A Preliminary Study of the Impact of Robotic Systems on Concrete 3D Printing in the Construction Industry
1804. Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
      Modelling of 3D Concrete Printing Process:
      A Perspective on Material and Structural Simulations
1805. Rubin Ariane, Quintanilha Lucas, Repette Wellington (2022-11)
      Influence of Structuration-Rate, with Hydration-Accelerating Admixture, on the Physical and Mechanical Properties of Concrete for 3D Printing
1806. Kulaienko Oleh, Kabus Oleksii (2022-11)
      3D Concrete Printing Technology:
      Implementing Tasks in Ukraine
1807. Roux Charlotte, Kuzmenko Kateryna, Roussel Nicolas, Mesnil Romain et al. (2022-11)
      Life Cycle Assessment of a Concrete 3D Printing Process
1808. Jiang Jinyang, Zheng Chaolang, Wang Fengjuan, Xu Wenxiang et al. (2022-11)
      Novel 3D Printing Phase-Change-Aggregate-Concrete:
      Mechanical and Thermal Properties Analysis
1809. Senthilnathan Shanmugaraj, Raphael Benny (2022-11)
      Using Computer-Vision for Monitoring the Quality of 3D Printed Concrete Structures
1810. Abbaoui Khalid, Korachi Issam, Mollah Md., Spangenberg Jon (2022-11)
      CFD Modelling of Mortar-Extrusion and Path-Planning-Strategy at the Corner for 3D Concrete Printing
1811. Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
      Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features
1812. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2022-11)
      Criticality of Binder-Aggregate Interaction for Buildability of 3D Printed Concrete Containing Limestone-Calcined-Clay
1813. Wang Lining, Aslani Farhad (2022-11)
      Structural Performance of Reinforced Concrete Beams with 3D Printed Cement-Based Sensor Embedded and Self-Sensing Cementitious Composites
1814. Arunothayan Arun, Nematollahi Behzad, Khayat Kamal, Ramesh Akilesh et al. (2022-11)
      Rheological Characterization of Ultra-High-Performance Concrete for 3D Printing
1815. Dahlenburg Maximilian, Hechtl Christian, Matthäus Carla, Fottner Johannes (2022-11)
      3D Concrete Printing:
      Graded Concrete-Extrusion
1816. Christen Heidi, Cho Seung, Zijl Gideon, Villiers Wibke (2022-11)
      Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
1817. Cao Xiangpeng, Yu Shiheng, Wu Shuoli, Cui Hongzhi (2022-11)
      Experimental Study of Hybrid Manufacture of Printing and Cast-in-Process to Reinforce 3D Printed Concrete
1818. Strohle Max, Sadique Monower, Dulaimi Anmar, Kadhim Mustafa (2022-11)
      Prospect and Barrier of 3D Concrete:
      A Systematic Review
1819. Wang Li, Yang Yu, Hu Yuanyuan, Ma Guowei (2022-11)
      Interfacial Properties of Three-Dimensional-Printed Permanent Formwork with Cast-in-Place Concrete
1820. Alonso-Cañon Sara, Blanco-Fernandez Elena, Castro-Fresno Daniel, Yoris-Nobile Adrian et al. (2022-11)
      Reinforcements in 3D Printing Concrete Structures
1821. Yue J., Beskos Dimitrios, Feng C., Wu Kai (2022-11)
      Hardened Fracture Characteristics of Printed Concrete Using Acoustic Emission Monitoring Technique
1822. Kan Deyuan, Liu Guifeng, Cao Shuang, Chen Zhengfa et al. (2022-11)
      Mechanical Properties and Pore-Structure of Multi-Walled Carbon-Nano-Tube-Reinforced Reactive Powder-Concrete for Three-Dimensional Printing Manufactured by Material-Extrusion
1823. Ahadi Bahram, Valiente López María (2022-11)
      Use of Nitinol-Shape Memory Alloy in the Reinforcement of 3D Concrete Printing Industry
1824. Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-11)
      Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing:
      Correction
1825. Ma Zongfang, Wan Weipeng, Song Lin, Liu Chao et al. (2022-11)
      An Approach of Path-Optimization Algorithm for 3D Concrete Printing Based on Graph-Theory
1826. Goracci Guido, Salgado David, Gaitero Juan, Dolado Jorge (2022-11)
      Electrical Conductive Properties of 3D Printed Concrete Composite with Carbon Nanofibers
1827. Liu Miao, Wang Li, Ma Guowei, Li Weiwei et al. (2022-11)
      U-Type Steel-Wire-Mesh for the Flexural Performance Enhancement of 3D Printed Concrete:
      A Novel Reinforcing Approach
1828. Li Shuai, Nguyen-Xuan Hung, Tran Jonathan (2022-11)
      Digital Design and Parametric Study of 3D Concrete Printing on Non-Planar Surfaces
1829. Chandrasekar Ravekumar, Gkantou Michaela, Nikitas Georgios, Hashim Khalid et al. (2022-10)
      Integration of 3D Concrete Printing in the Construction Industry:
      A Short Review
1830. Septiansyah Fadlika, Prasetya Sonki, Nursanto Djoko (2022-10)
      Control and Electrical System Design Consideration for a 3D Concrete Printer
1831. Khan Shoukat, Koç Muammer (2022-10)
      Numerical Modelling and Simulation for Extrusion-Based 3D Concrete Printing:
      The Underlying Physics, Potential, and Challenges
1832. Walker Ian, Krovi Venkat, Peerzada Abdul, Raman Adhiti et al. (2022-10)
      3D Concrete Printing with Macro-Micro Robots
1833. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-10)
      In-Line Activation of Geopolymer-Slurry for Concrete 3D Printing
1834. Miao Haibin, Guo Chao, Lu Zhengran, Chen Zhihua (2022-10)
      3D Meso-Scale-Analysis of Concrete Containing Defect Damages During Different Freeze-Thaw-Cycles
1835. Deng Zhicong, Jia Zijian, Zhang Chao, Wang Zhibin et al. (2022-10)
      3D Printing Lightweight Aggregate Concrete Prepared with Shell-Packing-Aggregate Method:
      Printability, Mechanical Properties and Pore-Structure
1836. Burger Joris, Huber Tobias, Lloret-Fritschi Ena, Mata-Falcón Jaime et al. (2022-10)
      Design and Fabrication of Optimised Ribbed Concrete Floor Slabs Using Large-Scale 3D Printed Formwork
1837. Mansouri Abraham, Binali Alreem, Aljawi Abdulla, Alhammadi Ahmed et al. (2022-10)
      Thermal Modeling of the Convective Heat-Transfer in the Large Air-Cavities of the 3D Concrete Printed Walls
1838. Qu Zhengyao, Geng Guoqing (2022-10)
      Thermal Response Gelatin-Cement-Composite for 3D Concrete Printing
1839. Dey Dhrutiman, Panda Biranchi (2022-10)
      An Experimental Study of Thermal Performance of 3D Printed Concrete Slabs
1840. Liu Chao, Chen Yuning, Zhang Zedi, Niu Geng et al. (2022-10)
      Study of the Influence of Sand on Rheological Properties, Bubble Features and Buildability of Fresh Foamed Concrete for 3D Printing
1841. Rensburg Johannes, Babafemi Adewumi, Combrinck Riaan (2022-09)
      A Textile Reinforcement Method for 3D Printed Concrete
1842. García Rodrigo, Dokladalova Eva, Dokládal Petr, Caron Jean-François et al. (2022-09)
      In-Line Monitoring of 3D Concrete Printing Using Computer-Vision
1843. Kalthoff Matthias, Raupach Michael, Matschei Thomas (2022-09)
      Investigation of Rheological Test-Methods for the Suitability of Mortars for Manufacturing of Textile-Reinforced Concrete Using a Laboratory Mortar-Extruder:
      LabMorTex
1844. Mehdizadeh Samim, Zimmermann Adrian, Tessmann Oliver (2022-09)
      RotoColumn:
      A Continuous Digital Fabrication Framework for Casting Large-Scale Linear Concrete Hollow Elements
1845. Hansemann Georg, Holzinger Christoph, Schmid Robert, Tapley Joshua et al. (2022-09)
      Lightweight Reinforced Concrete Slab
1846. Bhooshan Shajay, Bhooshan Vishu, Megens Johannes, Casucci Tommaso et al. (2022-09)
      Print-Path Design for Inclined-Plane Robotic 3D Printing of Unreinforced Concrete
1847. Zhang Yu, Zhang Yunsheng, Qian Rusheng, Liu Guojian et al. (2022-09)
      Influence of Steel-Fiber on the Water-Absorption of 3D Printed Concrete
1848. Machovec Jan, Štádler Marek, Kamenický Josef, Reiterman Pavel (2022-09)
      Mechanical Properties of Concrete Lintel Produced by 3D Printing
1849. Liu Bing, Liu Xiaoyan, Li Guangtao, Geng Songyuan et al. (2022-09)
      Study on Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete Using Destructive and Non-Destructive Testing Methods
1850. Nuh Mishael, Oval Robin, Orr John, Shepherd Paul (2022-09)
      Digital Fabrication of Ribbed Concrete Shells Using Automated Robotic Concrete Spraying
1851. Spuriņa Ella, Šinka Māris, Ziemelis Krists, Vanags Andris et al. (2022-09)
      The Effects of Air-Entraining Agent on Fresh and Hardened Properties of 3D Concrete
1852. Hass Lauri, Bos Freek, Salet Theo (2022-09)
      Characterizing the Bond Properties of Automatically Placed Helical Reinforcement in 3D Printed Concrete
1853. Mata-Falcón Jaime, Bischof Patrick, Huber Tobias, Anton Ana-Maria et al. (2022-09)
      Digitally Fabricated Ribbed Concrete Floor Slabs:
      A Sustainable Solution for Construction
1854. Weiner G., Wurst G., Lessmeister T., Sherizadeh T. et al. (2022-09)
      Triangulating Impact Location in 3D Printable Concrete Using Fiber Bragg Grating Sensors
1855. Baghdadi Abtin, Dörrie Robin, Kloft Harald (2022-09)
      Optimization of Building Floor Beam Layout by Optimization Algorithms Regarding the Concrete Printing Techniques
1856. Zhao Yanhua, Meng Wei, Wang Peifu, Qian Dongqing et al. (2022-09)
      Research-Progress of Concrete 3D Printing Technology and Its Equipment System, Material, and Molding-Defect-Control
1857. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2022-09)
      3D Printing Effect on the Compressive Strength of Concrete Structures
1858. Mortada Youssef, Mohammad Malek, Mansoor Bilal, Grasley Zachary et al. (2022-09)
      Development of Test-Methods to Evaluate the Printability of Concrete Materials for Additive Manufacturing
1859. Naboni Roberto, Breseghello Luca, Sanin Sandro (2022-09)
      Environment-Aware 3D Concrete Printing through Robot-Vision
1860. Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2022-09)
      Spray-Based 3D Concrete Printing with Calcium and Polymeric Additives:
      A Feasibility Study
1861. Ren Chuangnan, Gao Baobin, Geng Chenhui, Zhu Wenjie (2022-09)
      Assembled Design and Compressive Performance Simulation of Mine Waterproof Wall Based on Concrete 3D Printing
1862. Medicis Carolina, Gonzalez Sergio, Alvarado Yezid, Vacca Hermes et al. (2022-09)
      Mechanical Performance of Commercially Available Premix UHPC-Based 3D Printable Concrete
1863. Ma Lei, Zhang Qing, Lombois-Burger Hélène, Jia Zijian et al. (2022-09)
      Pore-Structure, Internal Relative Humidity, and Fiber-Orientation of 3D Printed Concrete with Polypropylene-Fiber and Their Relation with Shrinkage
1864. Puzatova (nee Sharanova) Anastasiia, Sokolnikova S., Dmitrieva Maria (2022-09)
      Polymer-Cement Concrete Based on Polyvinyl-Acetate Dispersion for Construction 3D Printing
1865. Qian Hao, Hua Sudong, Yue Hongfei, Feng Guiyang et al. (2022-09)
      Utilization of Recycled Construction-Powder in 3D Concrete Printable Materials through Particle-Packing-Optimization
1866. Chen Yuning, Zhang Yamei, Xie Yudong, Zhang Zedi et al. (2022-09)
      Unraveling Pore-Structure Alternations in 3D Printed Geopolymer Concrete and Corresponding Impacts on Macro-Properties
1867. Wu Yun-Chen, Li Mo (2022-09)
      Effects of Early-Age Rheology and Printing Time Interval on Late-Age Fracture Characteristics of 3D Printed Concrete
1868. Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2022-09)
      A Numerical Model of 3D Concrete Printing
1869. Abstoß Marvin, Rudolph Enrico, Funke Henrik, Gelbrich Sandra (2022-09)
      Near-Net-Shape-Extrusion and Milling of Complex Concrete Elements for the Production of Moulds
1870. Kompella Sriram, Monte Francesco, Bassani Andrea, Guanziroli Stefano et al. (2022-09)
      A Comparative Study of Hardened-State Mechanical Properties of 3D Printed and Conventionally Cast Fiber-Reinforced Concrete
1871. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2022-09)
      Topology-Optimization of Structural Beam Systems considering 3D Concrete Printing Technology-Constraints
1872. Ivaniuk Egor, Tošić Zlata, Eichenauer Martin, Müller Steffen et al. (2022-09)
      Automated Production of Textile Reinforced Concrete Modules for the Assembly of Shell Structures
1873. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2022-09)
      Robot-Assisted Flow-Production-Processes Tool-Development for the Fabrication of Thin-Walled Fiber-Reinforced Concrete Elements
1874. Marcucci Andrea, Ferrara Liberato (2022-09)
      Artificial Neural Networks and Fuzzy Logic Applied to Concrete Rheology for the Study of Printability
1875. Cicione Antonio, Kruger Jacques, Mostert Jean-Pierre, Walls Richard et al. (2022-09)
      The Effect of Wind on 3D Printed Concrete Inter-Layer Bond Strength Based on Machine Learning Algorithms
1876. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2022-09)
      Rheological and Strength-Characterisation of Limestone-Calcined-Clay-Cement 3D Printed Concrete
1877. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2022-09)
      Fresh Properties and Strength Evolution of Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer Composite for 3D Concrete Printing Application
1878. Shkundalova Olena, Molkens Tom, Claßen Martin, Rossi Barbara (2022-09)
      Characterization of 3D Printed Concrete Beams After Exposure to High Temperature
1879. Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2022-09)
      Recycling of Flash-Calcined Dredged Sediment for Concrete 3D Printing
1880. Licciardello Lucia, Reggia Adriano, Metelli Giovanni, Plizzari Giovanni (2022-09)
      Investigation of the Inter-Layer Strength of 3D Printed Concrete Shear Walls
1881. He Lewei, Li Hua, Chow Wai, Zeng Biqing et al. (2022-09)
      Increasing the Inter-Layer Strength of 3D Printed Concrete with Tooth-Like Interface:
      An Experimental and Theoretical Investigation
1882. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-09)
      3D Printing Concrete with Recycled Coarse Aggregates:
      The Influence of Pore-Structure on Inter-Layer Adhesion
1883. Marczyk Joanna, Ziejewska Celina, Korniejenko Kinga, Łach Michał et al. (2022-09)
      Properties of 3D Printed Concrete-Geopolymer Hybrids Reinforced with Aramid Roving
1884. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Tittelboom Kim et al. (2022-09)
      Blending Performance of Helical Static Mixer Used for Twin-Pipe 3D Concrete Printing
1885. Bischof Patrick, Mata-Falcón Jaime, Kaufmann Walter (2022-08)
      Fostering Innovative and Sustainable Mass-Market Construction Using Digital Fabrication with Concrete
1886. Pham Thi, Nguyen Thu, Trinh Thanh, Nguyen Anh et al. (2022-08)
      Development of 3D Printers for Concrete Structures:
      Mix Proportion Design Approach and Laboratory Testing
1887. Kaliyavaradhan Senthil, Ambily Parukutty, Prem Prabhat, Ghodke Swapnil (2022-08)
      Test-Methods for 3D Printable Concrete
1888. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-08)
      Investigation of Fresh Properties of 3D Concrete Printing Containing Nano-Clay in Forms of Suspension and Powder
1889. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Yuan Yong et al. (2022-08)
      Stiffening Controllable Concrete Modified with Redispersible Polymer Powder for Twin-Pipe Printing
1890. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-08)
      Evaluation of Aggregates, Fibers and Voids-Distribution in 3D Printed Concrete
1891. Peng Guanhong (2022-08)
      Digital Fabrication and Mechanical Properties of 3D Printing Concrete
1892. Chang Ze, Liang Minfei, Xu Yading, Schlangen Erik et al. (2022-08)
      3D Concrete Printing:
      Lattice Modeling of Structural Failure considering Damage and Deformed Geometry
1893. Wang Zhibin, Jia Lutao, Deng Zhicong, Zhang Chao et al. (2022-08)
      Bond Behavior Between Steel-Bars and 3D Printed Concrete:
      Effect of Concrete Rheological Property, Steel-Bar Diameter and Paste-Coating
1894. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2022-08)
      3D Printed Concrete as Stay-in-Place Formwork:
      Mechanics During Casting and Curing
1895. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2022-08)
      Rheometry for Concrete 3D Printing:
      A Review and an Experimental Comparison
1896. Liu Junli, Setunge Sujeeva, Tran Jonathan (2022-07)
      3D Concrete Printing with Cement-Coated Recycled Crumb Rubber:
      Compressive and Microstructural Properties
1897. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-07)
      Automating Mix-Design for 3D Concrete Printing Using Optimization Methods
1898. Barjuei Erfan, Courteille Eric, Rangeard Damien, Marie F. et al. (2022-07)
      Real-Time Vision-Based Control of Industrial Manipulators for Layer-Width Setting in Concrete 3D Printing Applications
1899. Lee Keon-Woo, Lee Hojae, Choi Myoungsung (2022-07)
      Correlation Between Thixotropic Behavior and Buildability for 3D Concrete Printing
1900. Inaty Francois, Baz Bilal, Aouad Georges (2022-07)
      Long-Term Durability-Assessment of 3D Printed Concrete
1901. Wan Qian, Wang Li, Ma Guowei (2022-07)
      Continuous and Adaptable Printing Path Based on Transfinite Mapping for 3D Concrete Printing
1902. Nodehi Mehrab, Aguayo Federico, Nodehi Shahab, Gholampour Aliakbar et al. (2022-07)
      Durability Properties of 3D Printed Concrete
1903. Maier Marcus, Lees Janet (2022-07)
      Inter-Layer Fracture Behavior of Functionally Layered Concrete
1904. Chang Ze, Zhang Hongzhi, Liang Minfei, Schlangen Erik et al. (2022-07)
      Numerical Simulation of Elastic Buckling in 3D Concrete Printing Using the Lattice-Model with Geometric Non-Linearity
1905. Wang Li, Li Qiqi, Hu Yuanyuan, Cui Tianlong et al. (2022-07)
      Shrinkage and Cracking Properties of Cellulose-Fiber-Concrete Composites for 3D Printing by Leveraging Internal Curing
1906. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2022-07)
      Enhancing the Properties of Foam-Concrete 3D Printing Using Porous Aggregates
1907. Sikora Paweł, Techman Mateusz, Federowicz Karol, Khayatt Ahmed et al. (2022-07)
      Insight into the Microstructural and Durability Characteristics of 3D Printed Concrete:
      Cast versus Printed Specimens
1908. Peralta Abadi Patricia, Smarsly Kay (2022-07)
      Requirements-Analysis of Additive Manufacturing for Concrete Printing:
      A Systematic Review
1909. Briels David, Kollmannsberger Stefan, Leithner Felicitas, Matthäus Carla et al. (2022-07)
      Thermal Optimization of Additively Manufactured Lightweight Concrete Wall Elements with Internal Cellular Structure through Simulations and Measurements
1910. Dong Liang, Yang Yekai, Liu Zhongxian, Ren Quanchang et al. (2022-07)
      Microstructure and Mechanical Behavior of 3D Printed Ultra-High-Performance Concrete after Elevated Temperatures
1911. Tao Yaxin, Ren Qiang, Lesage Karel, Tittelboom Kim et al. (2022-07)
      Shape Stability of 3D Printable Concrete with River and Manufactured Sand Characterized by Squeeze Flow
1912. Ribeiro João, Figueiredo Bruno, Cruz Paulo, Camões Aires (2022-07)
      Concrete AM:
      An Insight into the Control of Main Parameters
1913. Lin Alexander, Goel Abhimanyu, Wong De, Yeo Charlene et al. (2022-07)
      Compressive Load-Dominated Concrete Structures for Customized 3D Printing Fabrication
1914. He Chuan, Zhang Shiyu, Liang Youwang, Ahmad Waqas et al. (2022-07)
      A Scientometric Review on Mapping Research Knowledge for 3D Printing Concrete
1915. Jipa Mihail-Andrei, Reiter Lex, Flatt Robert, Dillenburger Benjamin (2022-07)
      Environmental Stress Cracking of 3D Printed Polymers Exposed to Concrete
1916. Yu Shiwei, Sanjayan Jay, Du Hongjian (2022-07)
      Effects of Cement Mortar Characteristics on Aggregate-Bed 3D Concrete Printing
1917. Gebhard Lukas, Esposito Laura, Menna Costantino, Mata-Falcón Jaime (2022-07)
      Inter-Laboratory Study on the Influence of 3D Concrete Printing Set-Ups on the Bond Behavior of Various Reinforcements
1918. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2022-07)
      Numerical Modeling of 3D Concrete Printing Wall Structure to Reliably Estimate the Failure Mechanisms
1919. Nedjar Boumediene, Awada Zeinab (2022-07)
      Incremental Formulation of Early-Age Concrete in the Finite Strain Range for the Modelling of 3D Concrete Printing
1920. Fairbairn Eduardo, Santos Larissa, Farias Marina, Mendoza Reales Oscar (2022-07)
      Numerical Modeling of New Conceptions of 3D Printed Concrete Structures for Pumped Storage Hydropower
1921. Tošić Zlata, Eichenauer Martin, Ivaniuk Egor, Lordick Daniel et al. (2022-07)
      Design and Optimization of Free-Form Surfaces for Modular Concrete 3D Printing
1922. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-07)
      The Theory of Critical Distances to Perform the Static Assessment of 3D Printed Concrete Weakened by Manufacturing-Defects and Cracks
1923. Ma Guowei, Bai Gang, Wang Li, Wang Fang (2022-07)
      Explosion-Resistance of 3D Printing Ultra-High-Performance Concrete Based on Contact-Explosion Tests
1924. Delavar Mohammad, Chen Hao, Sideris Petros (2022-07)
      Design of 3D Printed Concrete Walls Under In-Plane Seismic Loading
1925. Silva Wilson, Kaasgaard Martin, Andersen Thomas (2022-06)
      Sustainable 3D Concrete Printing with Large Aggregates
1926. Dulaj Albanela, Suijs Monica, Salet Theo, Lucas Sandra (2022-06)
      Incorporation and Characterization of Multi-Walled Carbon Nanotube Concrete Composites for 3D Printing Applications
1927. Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2022-06)
      Uncertainty Quantification of Concrete Properties at Fresh State and Stability-Analysis of the 3D Printing Process by Stochastic Approach
1928. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-06)
      Set-On Demand Concrete by Activating Encapsulated Accelerator for 3D Printing
1929. Dörrie Robin, Kloft Harald (2022-06)
      Force-Flow Compliant Robotic Path-Planning Approach for Reinforced Concrete Elements Using SC3DP
1930. Krenzer Knut, Palzer Ulrich, Müller Steffen, Mechtcherine Viktor (2022-06)
      Simulation of 3D Concrete Printing Using Discrete Element Method
1931. Dielemans Gido, Lachmayer Lukas, Recker Tobias, Atanasova Lidia et al. (2022-06)
      Mobile Additive Manufacturing:
      A Case Study of Clay Formwork for Bespoke In-Situ Concrete Construction
1932. Asakawa Tomoya, Nishiwaki Tomoya, Ohno Kazunori, Yokoyama Shigeru et al. (2022-06)
      Fundamental Study on Automated Inter-Layer Reinforcing System with Metal-Fiber-Insertion for 3D Concrete Printer
1933. Moelich Gerrit, Rensburg Johannes, Kruger Jacques, Combrinck Riaan (2022-06)
      The Environment’s Effect on the Inter-Layer Bond Strength of 3D Printed Concrete
1934. Markin Slava, Mechtcherine Viktor (2022-06)
      Measuring Plastic Shrinkage and Related Cracking of 3D Printed Concretes
1935. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2022-06)
      Fresh and Hardened Properties of 3D Printable Foam-Concrete Containing Porous Aggregates
1936. Menna Costantino, Esposito Laura (2022-06)
      Flexural Behavior of Steel-Reinforced Topology-Optimised Beams Fabricated by 3D Concrete Printing
1937. Schmid Robert, Hansemann Georg, Autischer Michael, Juhart Joachim (2022-06)
      Adaptive Foam-Concrete in Digital Fabrication
1938. Ye Junhong, Weng Yiwei, Du Hongjian, Li Mingyang et al. (2022-06)
      Feasibility of Using Ultra-High-Ductile Concrete to Print Self-Reinforced Hollow Structures
1939. Spangenberg Jon, Silva Wilson, Mollah Md., Comminal Raphaël et al. (2022-06)
      Integrating Reinforcement with 3D Concrete Printing:
      Experiments and Numerical Modelling
1940. Xiao Yinan, Khader Noor, Vandenberg Aileen, Lowke Dirk et al. (2022-06)
      Injection 3D Concrete Printing (I3DCP) Combined with Vector-Based 3D Graphic Statics
1941. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2022-06)
      Evaluation of the Bond Strength Between 3D Printed and Self-Compacting Concrete
1942. Cho Seung, Heever Marchant, Kruger Jacques, Zijl Gideon (2022-06)
      Proof of Concept:
      Sprayable SHCC Overlay Reinforcement Regime for Unreinforced 3D Printed Concrete Structure
1943. Reiter Lex, Anton Ana-Maria, Wangler Timothy, Dillenburger Benjamin et al. (2022-06)
      A 3D Printing Platform for Reinforced Printed-Sprayed Concrete Composites
1944. Xu Jie, Kolawole John, Provis John, Dobrzanski James et al. (2022-06)
      An Early Trial on Milling 3D Printed Concrete Geometries:
      Observations and Insights of the Process
1945. Abdalqader Ahmed, Sonebi Mohammed, Dedenis Marie, Amziane Sofiane et al. (2022-06)
      Mechanical Performance of 3D Printed Concrete Containing Fly-Ash, Metakaolin and Nano-Clay
1946. Das Arnesh, Aguilar Sanchez Asel, Wangler Timothy, Flatt Robert (2022-06)
      Freeze-Thaw-Performance of 3D Printed Concrete:
      Influence of Interfaces
1947. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2022-06)
      Using Limestone-Powder as a Carrier for the Accelerator in Extrusion-Based 3D Concrete Printing
1948. Favier Aurélie, Petit Agnès (2022-06)
      Strategies for Reducing the Environmental Footprint of Additive Manufacturing via Sprayed Concrete
1949. Gantner Stefan, Rennen Philipp, Rothe Tom, Hühne Christian et al. (2022-06)
      Core Winding:
      Force-Flow-Oriented Fiber-Reinforcement in Additive Manufacturing with Concrete
1950. Gebhard Lukas, Bischof Patrick, Anton Ana-Maria, Mata-Falcón Jaime et al. (2022-06)
      Pre-Installed Reinforcement for 3D Concrete Printing
1951. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2022-06)
      Salt-Scaling-Resistance of 3D Printed Concrete
1952. Kruger Jacques, Mostert Jean-Pierre, Zijl Gideon (2022-06)
      A Strain-Based Constitutive Model Ensuring Aesthetic 3D Printed Concrete Structures:
      Limiting Differential Settlement of Filaments
1953. Neef Tobias, Müller Steffen, Mechtcherine Viktor (2022-06)
      Integration of Mineral Impregnated Carbon-Fiber (MCF) into Fine 3D Printed Concrete Filaments
1954. Nuh Mishael, Oval Robin, Orr John (2022-06)
      ARCS:
      Automated Robotic Concrete Spraying for the Fabrication of Variable Thickness Doubly Curved Shells
1955. Hass Lauri, Bos Freek (2022-06)
      Robotically Placed Reinforcement Using the Automated Screwing Device:
      An Application Perspective for 3D Concrete Printing
1956. Lachmayer Lukas, Dörrie Robin, Kloft Harald, Raatz Annika (2022-06)
      Process-Control for Additive Manufacturing of Concrete Components
1957. Demont Léo, Charrier Malo, Margerit Pierre, Ducoulombier Nicolas et al. (2022-06)
      Flow-Based Pultrusion of Anisotropic Concrete:
      Mechanical Properties at Hardened State
1958. Mostert Jean-Pierre, Kruger Jacques (2022-06)
      Interlocking 3D Printed Concrete Filaments Through Surface Topology Modifications for Improved Tensile Bond Strength
1959. Ooms Ticho, Vantyghem Gieljan, Tao Yaxin, Bekaert Michiel et al. (2022-06)
      The Production of a Topology-Optimized 3D Printed Concrete Bridge
1960. Kovaleva Daria, Nistler Maximilian, Verl Alexander, Blandini Lucio et al. (2022-06)
      Zero-Waste Production of Lightweight Concrete Structures with Water-Soluble Sand Formwork
1961. Taubert Markus, Mechtcherine Viktor (2022-06)
      Mix-Design for a 3D Printable Concrete with Coarse Aggregates and Consideration of Standardisation
1962. Bischof Patrick, Mata-Falcón Jaime, Burger Joris, Kaufmann Walter (2022-06)
      Digitally Fabricated Keyed Concrete Connections
1963. Kolawole John, Becker Daniel, Xu Jie, Dobrzanski James et al. (2022-06)
      Selected Test-Methods for Assessing Fresh and Plastic-State 3D Concrete Printing-Materials
1964. Sitnikov Vasily, Kitani Lena, Maneka Artemis, Lloret-Fritschi Ena et al. (2022-06)
      Design and Fabrication of Spatially Graded Concrete Elements with Ice Aggregate Method
1965. Hack Norman, Jantzen Carsten, Brohmann Leon, Gerke Markus et al. (2022-06)
      A Closed-Loop Workflow for Quality Inspection and Integrated Post-Processing of 3D Printed Concrete Elements
1966. Han Nv, Xiao Jianzhuang, Zhang Lihai, Peng Yu (2022-06)
      A Micro-Scale-Based Numerical Model for Investigating Hygro-Thermo-Mechanical Behavior of 3D Printed Concrete at Elevated Temperatures
1967. Dvorkin Leonid, Marchuk Vitaliy, Hager Izabela, Maroszek Marcin (2022-06)
      Design of Cement-Slag Concrete Composition for 3D Printing
1968. Liu Chao, Chen Yuning, Xiong Yuanliang, Jia Lutao et al. (2022-06)
      Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Buildability of 3D Printing Foam-Concrete:
      From Water State and Flocculation Point of View
1969. Hojati Maryam, Memari Ali, Zahabi Mehrzad, Wu Zhengyu et al. (2022-06)
      Barbed-Wire Reinforcement for 3D Concrete Printing
1970. Ekanayaka Virama, Lachmayer Lukas, Raatz Annika, Hürkamp André (2022-06)
      Approach to Optimize the Inter-Layer Waiting Time in Additive Manufacturing with Concrete Utilizing FEM Modeling
1971. Gislason Styrmir, Bruhn Simon, Breseghello Luca, Sen Burak et al. (2022-06)
      Porous 3D Printed Concrete Beams Show an Environmental Promise:
      A Cradle-to-Grave Comparative Life Cycle Assessment
1972. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-06)
      Fractional Factorial Design to Study Admixtures Used for 3D Concrete Printing Applications
1973. Bi Minghao, Tran Jonathan, Xia Lingwei, Ma Guowei et al. (2022-06)
      Topology-Optimization for 3D Concrete Printing with Various Manufacturing-Constraints
1974. Lee Jin, Kim Jae (2022-06)
      Matric-Suction and Its Effect on the Shape Stability of 3D Printed Concrete
1975. Neef Tobias, Butler Marko, Mechtcherine Viktor (2022-06)
      Integrating Mineral-Bonded Carbon Fibers into 3D Concrete Printing
1976. Pastore Tommaso, Esposito Laura, Menna Costantino, Asprone Domenico (2022-06)
      Overcoming Fabrication-Constraints in Concrete 3D Printing Using Interlacing Bezier-Curves:
      A Numerical and Experimental Analysis
1977. Xiao Yinan, Hack Norman, Kloft Harald (2022-06)
      Digital Structural Design and Shotcrete 3D Printing-Strategies for Lightweight Reinforced Concrete Beam-Grid Structures
1978. Shkundalova Olena, Molkens Tom, Rossi Barbara, Claßen Martin (2022-06)
      Testing 3D Printed Reinforced Concrete Beams
1979. Galeote Eduardo, Egea Carlos, Fuente Albert (2022-06)
      Characterisation and Modelling of a 3D Concrete Printed Wall under Flexure
1980. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-06)
      Mitigating Early-Age Cracking in 3D Printed Concrete Using Fibers, Superabsorbent Polymers, Shrinkage Reducing Admixtures, B-CSA Cement and Curing Measures
1981. Chang Ze, Wan Zhi, Xu Yading, Schlangen Erik et al. (2022-06)
      Convolutional Neural Network for Predicting Crack-Pattern and Stress-Crack-Width Curve of Air-Void Structure in 3D Printed Concrete
1982. Mohan Manu, Rahul Attupurathu, Tao Yaxin, Schutter Geert et al. (2022-06)
      Hydration Re-Initiation of Borated CSA Systems with a Two-Stage Mixing Process:
      An Application in Extrusion-Based Concrete 3D Printing
1983. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-06)
      Hardened Properties of 3D Printed Concrete with Recycled Coarse Aggregate
1984. Weger Daniel, Talke Daniel, Lowke Dirk, Henke Klaudius et al. (2022-06)
      Additive Manufacturing of Free-Formed Concrete Elements by Selective Binding with Calcium Silicate-Based Cements
1985. Hao Lucen, Xiao Jianzhuang, Sun Jingting, Xia Bing et al. (2022-06)
      Thermal Conductivity of 3D Printed Concrete With Recycled Fine Aggregate Composite Phase-Change-Materials
1986. Cao Xiangpeng, Yu Shiheng, Zheng Dapeng, Cui Hongzhi (2022-06)
      Nail-Planting to Enhance the Interface Bonding Strength in 3D Printed Concrete
1987. Jiang Quan, Liu Qiang, Wu Si, Zheng Hong et al. (2022-06)
      Modification Effect of Nano-Silica and Polypropylene-Fiber for Extrusion-Based 3D Printing Concrete:
      Printability and Mechanical Anisotropy
1988. Buswell Richard (2022-06)
      CCR Digital Concrete 2022 SI:
      Editorial
1989. Wang Xianggang, Jia Lutao, Jia Zijian, Zhang Chao et al. (2022-06)
      Optimization of 3D Printing Concrete with Coarse Aggregate via Proper Mix-Design and Printing-Process
1990. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2022-06)
      Criticality of Microstructural Evolution at an Early-Age on the Buildability of an Accelerated 3D Printable Concrete
1991. Srivastava Manu, Ammons Jake, Peerzada Abdul, Krovi Venkat et al. (2022-05)
      3D Printing of Concrete with a Continuum-Robot-Hose Using Variable-Curvature Kinematics
1992. Ma Guowei, Yan Yufei, Zhang Mo, Sanjayan Jay (2022-05)
      Effect of Steel-Slag on 3D Concrete Printing of Geopolymer with Quaternary Binders
1993. Shkundalova Olena, Molkens Tom, Claßen Martin, Rossi Barbara (2022-05)
      Computational Modelling of Material-Behavior of Layered 3D Printed Concrete
1994. Reinold Janis, Gudžulić Vladislav, Meschke Günther (2022-05)
      Fiber-Orientation Modeling During Extrusion-Based 3D Concrete Printing
1995. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-05)
      The Theory of Critical Distances to Assess the Effect of Cracks & Manufacturing-Defects on the Static Strength of 3D Printed Concrete
1996. Flatt Robert, Wangler Timothy (2022-05)
      On Sustainability and Digital Fabrication with Concrete
1997. Kondepudi Kala, Subramaniam Kolluru, Nematollahi Behzad, Bong Shin et al. (2022-05)
      Study of Particle-Packing and Paste-Rheology in Alkali-Activated Mixtures to Meet the Rheology Demands of 3D Concrete Printing
1998. Ramakrishnan Sayanthan, Kanagasuntharam Sasitharan, Sanjayan Jay (2022-05)
      In-Line Activation of Cementitious Materials for 3D Concrete Printing
1999. Zhang Chao, Jia Zijian, Wang Xianggang, Jia Lutao et al. (2022-05)
      A Two-Phase Design-Strategy Based on the Composite of Mortar and Coarse Aggregate for 3D Printable Concrete with Coarse Aggregate
2000. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2022-05)
      Bonding Strength of Steel-Rebars Perpendicular to the Hardened 3D Printed Concrete-Layers
2001. Breseghello Luca, Naboni Roberto (2022-05)
      Tool-Path -Based Design for 3D Concrete Printing of Carbon-Efficient Architectural Structures
2002. Christen Heidi, Zijl Gideon, Villiers Wibke (2022-05)
      The Incorporation of Recycled Brick-Aggregate in 3D Printed Concrete
2003. Biricik Öznur, Mardani Ali (2022-05)
      Parameters Affecting Thixotropic Behavior of Self-Compacting Concrete and 3D Printable Concrete:
      A State of the Art Review
2004. Samad Nur, Abdullah Siti, Ibrahim Mustaffa, Shahidan Shahiron et al. (2022-05)
      Initial Properties of 3D Printing Concrete Using Rice-Husk-Ash as Partial Cement Replacement
2005. Keys Courtney, McCorkhill Noah, Lee Yoon-Si (2022-04)
      Investigation of Martian Concrete:
      Pumpability and Strength for Extraterrestrial 3D Printing
2006. Liu Huawei, Liu Chao, Bai Guoliang, Wu Yiwen et al. (2022-04)
      Influence of Pore-Defects on the Hardened Properties of 3D Printed Concrete with Coarse Aggregate
2007. Prem Prabhat, Ravichandran Darssni, Kaliyavaradhan Senthil, Ambily Parukutty (2022-04)
      Comparative Evaluation of Rheological Models for 3D Printable Concrete
2008. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-04)
      D-Optimal Design of Experiments Applied to 3D High-Performance Concrete Printing Mix-Design
2009. Tan Yuan, Dahlenburg Maximilian, Fottner Johannes, Kessler Stephan (2022-04)
      Influencing Factors of the Mixing Performance of a Near-Nozzle Continuous Mixer for 3D Concrete Printing:
      An Analysis Based on Spatial-Lacey-Mixing-Index
2010. Huang Xin, Yang Weihao, Song Fangnian, Zou Jiuqun (2022-04)
      Study on the Mechanical Properties of 3D Printing Concrete Layers and the Mechanism of Influence of Printing Parameters
2011. Ennab Lena, Dixit Manish, Birgisson Bjorn, Kumar Pranav (2022-04)
      Comparative Life Cycle Assessment of Large-Scale 3D Printing Utilizing Kaolinite-Based Calcium-Sulfoaluminate-Cement Concrete and Conventional Construction
2012. Stieler David, Schwinn Tobias, Menges Achim (2022-04)
      Additive Formwork in Pre-Cast Construction:
      Agent-Based Methods for Fabrication-Aware Modularization of Concrete Building Elements
2013. Bedarf Patrick, Szabó Anna, Zanini Michele, Heusi Alex et al. (2022-04)
      Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab
2014. Wu Hao, Li Ziyan, Zhou Xinjie, Wu Xinyu et al. (2022-04)
      Digital Design and Fabrication of a 3D Concrete Printed Funicular Spatial Structure
2015. Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
      Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
      A Systematic Literature Review
2016. Wang Bolin, Yao Xiaofei, Yang Min, Zhang Runhong et al. (2022-04)
      Mechanical Performance of 3D Printed Concrete in Steam-Curing Conditions
2017. Mechtcherine Viktor, Tittelboom Kim, Kazemian Ali, Kreiger Eric et al. (2022-04)
      A Roadmap for Quality-Control of Hardening and Hardened Printed Concrete
2018. Liu Haoran, Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2022-04)
      Buildability Prediction of 3D Printed Concrete at Early-Ages:
      A Numerical Study with Drucker-Prager-Model
2019. Huang Shuyi, Xu Weiguo, Li Yuqian (2022-04)
      The Impacts of Fabrication Systems on 3D Concrete Printing Building Forms
2020. Ziejewska Celina, Marczyk Joanna, Korniejenko Kinga, Bednarz Sebastian et al. (2022-04)
      3D Printing of Concrete-Geopolymer Hybrids
2021. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2022-04)
      Slow Penetration for Characterizing Concrete for Digital Fabrication
2022. Ruffray Nicolas, Reiter Lex, Flatt Robert (2022-04)
      Overcoming Environmental Stress-Cracking of FDM 3D Printed Formwork for Counter-Pressure Casting of Concrete
2023. Jipa Mihail-Andrei, Dillenburger Benjamin (2022-04)
      3D Printed Formwork for Concrete:
      State of the Art, Opportunities, Challenges, and Applications
2024. Rollakanti Chiranjeevi, Prasad C. (2022-04)
      Applications, Performance, Challenges and Current Progress of 3D Concrete Printing Technologies as the Future of Sustainable Construction:
      A State of the Art Review
2025. Kazadi Billy, Yao Liang, Wang Li (2022-04)
      In-Process Reinforcement Method for 3D Concrete Printing:
      Status, Potentials and Challenges
2026. Zhou Ji, Hou Guanyu, Liu Xiongfei, Li Qi et al. (2022-04)
      Mechanical Properties of Spray-Based 3D Printed Micro-Cable-Reinforced Concrete
2027. Zhang Xinyue, Cui Weijiu, Qu Chengping, Wang Sheng et al. (2022-04)
      Discussion on Key Problems of 3D Printing Concrete in Coastal Environment
2028. Liu Xiongfei, Li Qi, Li Jixiang (2022-04)
      Shrinkage and Mechanical Properties Optimization of Spray-Based 3D Printed Concrete by PVA-Fiber
2029. Kovaleva Daria, Nistler Maximilian, Blandini Lucio, Sobek Werner et al. (2022-04)
      Recyclable Sand Formwork:
      Towards Circular Production of Lightweight Concrete Structures
2030. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2022-04)
      A Grammar-Based Algorithm for Tool-Path-Generation:
      Compensating for Material-Deformation in the Additive Manufacturing of Concrete
2031. Nodehi Mehrab, Ozbakkaloglu Togay, Gholampour Aliakbar (2022-04)
      Effect of Supplementary Cementitious Materials on Properties of 3D Printed Conventional and Alkali-Activated Concrete:
      A Review
2032. Bhattacherjee Shantanu, Santhanam Manu (2022-04)
      Investigation on the Effect of Alkali-Free Aluminium Sulfate-Based Accelerator on the Fresh Properties of 3D Printable Concrete
2033. Marchment Taylor, Sanjayan Jay (2022-04)
      Lap Joint Reinforcement for 3D Concrete Printing
2034. Chen Yidong, Zhang Yunsheng, Pang Bo, Wang Dafu et al. (2022-04)
      Steel-Fiber Orientational Distribution and Effects on 3D Printed Concrete with Coarse Aggregate
2035. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-04)
      A Plastic Shrinkage Cracking-Risk-Model for 3D Printed Concrete Exposed to Different Environments
2036. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2022-04)
      Effect of Processing on the Air-Void System of 3D Printed Concrete
2037. Buswell Richard, Xu Jie, Becker Daniel, Dobrzanski James et al. (2022-04)
      Geometric Quality Assurance for 3D Concrete Printing and Hybrid Construction Manufacturing Using a Standardised Test Part for Benchmarking Capability
2038. Ma Guowei, Buswell Richard, Silva Wilson, Wang Li et al. (2022-03)
      Technology Readiness:
      A Global Snapshot of 3D Concrete Printing and the Frontiers for Development
2039. Adams Thomas, Heuer Christoph, Brell-Cokcan Sigrid (2022-03)
      Dynamic 3D Print-Head for Spatial Strand-Extrusion of Fiber-Reinforced Concrete:
      Requirements, Development and Application
2040. Wangler Timothy, Pileggi Rafael, Gürel Şeyma, Flatt Robert (2022-03)
      A Chemical Process Engineering Look at Digital Concrete Processes:
      Critical Step Design, In-Line Mixing, and Scale-Up
2041. Nguyen Vuong, Nguyen-Xuan Hung, Panda Biranchi, Tran Jonathan (2022-03)
      3D Concrete Printing Modelling of Thin-Walled Structures
2042. Zhang Chao, Deng Zhicong, Chen Chun, Zhang Yamei et al. (2022-03)
      Predicting the Static Yield-Stress of 3D Printable Concrete Based on Flowability of Paste and Thickness of Excess-Paste-Layer
2043. Wang Bolin, Zhai Mingang, Yao Xiaofei, Wu Qing et al. (2022-03)
      Printable and Mechanical Performance of 3D Printed Concrete Employing Multiple Industrial Wastes
2044. Zhi Peng, Wu Yuching, Yang Qianfan, Kong Xiangrui et al. (2022-03)
      Effect of Spiral Blade Geometry on 3D Printed Concrete Rheological Properties and Extrudability Using Discrete Event Modeling
2045. Ivanova Irina, Ivaniuk Egor, Bisetti Sameercharan, Nerella Venkatesh et al. (2022-03)
      Comparison Between Methods for Indirect Assessment of Buildability in Fresh 3D Printed Mortar and Concrete
2046. Liu Siyu, Lu Bing, Li Hongliang, Pan Zehua et al. (2022-03)
      A Comparative Study on Environmental Performance of 3D Printing and Conventional Casting of Concrete Products with Industrial Wastes
2047. Tay Yi, Lim Jian, Li Mingyang, Tan Ming (2022-03)
      Creating Functionally Graded Concrete Materials with Varying 3D Printing Parameters
2048. Cui Hongzhi, Li Yuanhong, Cao Xiangpeng, Huang Mingyang et al. (2022-03)
      Experimental Study of 3D Concrete Printing-Configurations Based on the Buildability Evaluation
2049. Miryousefi Ata Sara, Kazemian Ali, Jafari Amirhosein (2022-03)
      Application of Concrete 3D Printing for Bridge Construction:
      Current Challenges and Future Directions
2050. Manhanpally Najeeb, Saha Suman (2022-03)
      Benefit-Cost Analysis of 3D Printed Concrete Building
2051. Bos Freek, Menna Costantino, Pradena Mauricio, Kreiger Eric et al. (2022-03)
      The Realities of Additively Manufactured Concrete Structures in Practice
2052. Mechtcherine Viktor, Taubert Markus, Müller Steffen, Will Frank et al. (2022-03)
      Additive Manufacturing of Monolithic, Steel-Reinforced Concrete Walls Using CONPrint3D-Reinforced Methods
2053. Xiao Jianzhuang, Lv Zhenyuan, Duan Zhenhua, Hou Shaodan (2022-03)
      Study on Preparation and Mechanical Properties of 3D Printed Concrete with Different Aggregate-Combinations
2054. Yang Shutong, Lan Tian, Sun Zhongke, Xu Mingqi et al. (2022-03)
      A Predictive Model to Determine Tensile Strength and Fracture-Toughness of 3D Printed Fiber-Reinforced Concrete Loaded in Different Directions
2055. Cui Hongzhi, Yu Shiheng, Cao Xiangpeng, Yang Haibin (2022-03)
      Evaluation of Printability and Thermal Properties of 3D Printed Concrete Mixed with Phase-Change-Materials
2056. Carneau Paul, Mesnil Romain, Baverel Olivier, Roussel Nicolas (2022-03)
      Layer Pressing in Concrete Extrusion-Based 3D Printing:
      Experiments and Analysis
2057. Stieler David, Schwinn Tobias, Menges Achim (2022-03)
      Volumetric Intersections:
      Modularization Approaches for Freeform Prefab Concrete Construction
2058. Gebhard Lukas, Burger Joris, Mata-Falcón Jaime, Lloret-Fritschi Ena et al. (2022-03)
      Towards Efficient Concrete Structures with Ultra-Thin 3D Printed Formwork:
      Exploring Reinforcement-Strategies and Optimization
2059. Zhou Jiehang, Du Longyu, Lai Jianzhong, Wang Qiang et al. (2022-03)
      Preparation and High-Velocity Impact Experiment for Three-Dimensional-Printed Concrete
2060. Mohan Manu, Rahul Attupurathu, Dam Benjamin, Zeidan Talina et al. (2022-02)
      Performance Criteria, Environmental Impact and Cost-Assessment for 3D Printable Concrete Mixtures
2061. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
      Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method
2062. Yang Yekai, Wu Chengqing, Liu Zhongxian, Li Jun et al. (2022-02)
      Characteristics of 3D Printing Ultra-High-Performance Fiber-Reinforced Concrete Under Impact Loading
2063. Wang Li, Yang Yu, Yao Liang, Ma Guowei (2022-02)
      Interfacial Bonding Properties of 3D Printed Permanent Formwork with the Post-Casted Concrete
2064. Zhang Yu, Qiao Hongxia, Qian Rusheng, Xue Cuizhen et al. (2022-02)
      Relationship Between Water-Transport Behavior and Inter-Layer Voids of 3D Printed Concrete
2065. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi (2022-02)
      Experimental Investigation on Inner- and Inter-Strip Reinforcements for 3D Printed Concrete via Automatic Staple Inserting Technique
2066. Raval Amitkumar, Patel C. (2022-02)
      Estimation of Interface-Friction and Concrete-Boundary-Layer for 3D Printable Concrete-Pumping
2067. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-02)
      Set-on-Demand Geopolymer Using Print-Head Mixing for 3D Concrete Printing
2068. Zöller Raphael, Ochlast Andreas, Zimmert Florian, Braml Thomas (2022-02)
      Development of Processes for the Automated Planning and Production of Individual Reinforced Concrete Elements
2069. Nguyen Ngoc, Bui Tan-Trung, Bui Quoc-Bao (2022-02)
      Fiber-Reinforced Concrete for Slabs without Steel-Rebar-Reinforcement:
      Assessing the Feasibility for 3D Printed Individual Houses
2070. Heever Marchant, Plessis Anton, Bester Frederick, Kruger Jacques et al. (2022-02)
      A Mechanistic Evaluation Relating Microstructural Morphology to a Modified Mohr-Griffith Compression-Shear Constitutive-Model for 3D Printed Concrete
2071. Aguilar Sanchez Asel, Wangler Timothy, Stefanoni Matteo, Angst Ueli (2022-02)
      Microstructural Examination of Carbonated 3D Printed Concrete
2072. Boscaro Federica, Quadranti Elia, Wangler Timothy, Mantellato Sara et al. (2022-02)
      Eco-Friendly, Set-on-Demand Digital Concrete
2073. Pham Luong, Lu Guoxing, Tran Jonathan (2022-02)
      Influences of Printing-Pattern on Mechanical Performance of Three-Dimensional-Printed Fiber-Reinforced Concrete
2074. Meisel Nicholas, Watson Nathan, Bilén Sven, Duarte José et al. (2022-02)
      Design and System Considerations for Construction-Scale Concrete Additive Manufacturing in Remote Environments via Robotic-Arm-Deposition
2075. Eugenin Claudia, Navarrete Iván, Brevis Wernher, Lopez Mauricio (2022-02)
      Air-Bubbles as an Admixture for Printable Concrete:
      A Review of the Rheological Effect of Entrained Air
2076. Weger Daniel, Gehlen Christoph, Korte Waldemar, Meyer-Brötz Fabian et al. (2022-02)
      Building Rethought:
      3D Concrete Printing in Building Practice
2077. Ahmed Sara, Yehia Sherif (2022-02)
      Evaluation of Workability and Structuration-Rate of Locally Developed 3D Printing Concrete Using Conventional Methods
2078. Ji Guangchao, Xiao Jianzhuang, Zhi Peng, Wu Yuching et al. (2022-02)
      Effects of Extrusion-Parameters on Properties of 3D Printing Concrete with Coarse Aggregates
2079. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Suraneni Prannoy et al. (2022-02)
      Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete:
      A Review
2080. Singh Amardeep, Liu Qiong, Xiao Jianzhuang, Lyu Qifeng (2022-02)
      Mechanical and Macrostructural Properties of 3D Printed Concrete Dosed with Steel-Fibers under Different Loading-Direction
2081. Ayegba Blessing, Egbe King-James, Nazar Ali, Huang Mingzhi et al. (2022-01)
      Resource Efficiency and Thermal Comfort of 3D Printable Concrete Building Envelopes Optimized by Performance Enhancing Insulation:
      A Numerical Study
2082. Heidarnezhad Fatemeh, Zhang Qian (2022-01)
      Shotcrete-Based 3D Concrete Printing:
      State of Art, Challenges, and Opportunities
2083. Ma Guowei, A Ruhan, Xie Panpan, Pan Zhu et al. (2022-01)
      3D Printable Aerogel-Incorporated Concrete:
      Anisotropy Influence on Physical, Mechanical, and Thermal Insulation Properties
2084. M’Lahfi Basma, Amegouz Driss, Qandil Mostafa (2022-01)
      New Printable Concrete Formulation Based on Fibers from Doum Palm Leaflets for 3D Printing of Energy-Efficient Buildings
2085. Tripathi Avinaya, Nair Sooraj, Neithalath Narayanan (2022-01)
      A Comprehensive Analysis of Buildability of 3D Printed Concrete and the Use of Bi-Linear Stress-Strain Criterion-Based Failure Curves Towards Their Prediction
2086. Feys Dimitri, Schutter Geert, Fataei Shirin, Martys Nicos et al. (2022-01)
      Pumping of Concrete:
      Understanding a Common Placement Method with Lots of Challenges
2087. Bakar Muhammad, Saude Nasuha, Ibrahim Mustaffa, Ismail Nur (2022-01)
      Additive Manufacturing:
      A Review of Current 3D Concrete Printing on Materials, Methods, Applications, Properties and Challenges
2088. Pastore Tommaso, Menna Costantino, Asprone Domenico (2022-01)
      Bézier-Based Biased Random-Key Genetic Algorithm to Address Printability-Constraints in the Topology-Optimization of Concrete Structures
2089. Ting Guan, Quah Tan, Lim Jian, Tay Yi et al. (2022-01)
      Extrudable Region Parametrical Study of 3D Printable Concrete Using Recycled-Glass Concrete
2090. Ding Tao, Qin Fei, Xiao Jianzhuang, Chen Xiaoming et al. (2022-01)
      Experimental Study on the Bond Behavior Between Steel-Bars and 3D Printed Concrete
2091. Suntharalingam Thadshajini, Upasiri Irindu, Nagaratnam Brabha, Poologanathan Keerthan et al. (2022-01)
      Finite Element Modelling to Predict the Fire Performance of Bio-Inspired 3D Printed Concrete Wall Panels Exposed to Realistic Fire
2092. Xie Xiangyu, Zhang Lihai, Shi Caijun, Liu Xuemei (2022-01)
      Prediction of Lubrication-Layer Properties of Pumped Concrete Based on Flow-Induced Particle-Migration
2093. Cui Jinyang, He Zhen, Zhang Guozhi, Cai Xinhua (2022-01)
      Rheological Properties of Sprayable Ultra-High-Performance Concrete with Different Viscosity-Enhancing Agents
2094. Asprone Domenico, Menna Costantino, Bos Freek, Mata-Falcón Jaime et al. (2022-01)
      Structural Design and Testing of Digitally Manufactured Concrete Structures
2095. Liu Chao, Xiong Yuanliang, Chen Yuning, Jia Lutao et al. (2022-01)
      Effect of Sulphoaluminate Cement on Fresh and Hardened Properties of 3D Printing Foamed Concrete
2096. Heever Marchant, Plessis Anton, Kruger Jacques, Zijl Gideon (2022-01)
      Evaluating the Effects of Porosity on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
2097. Wu Zhengyu, Memari Ali, Duarte José (2022-01)
      State of the Art Review of Reinforcement-Strategies and Technologies for 3D Printing of Concrete
2098. Castano-Alvarez Ruben, Calderon-Uriszar-Aldaca Iñigo, Marcos Ignacio (2021-12)
      Applicability of Existing Models for the Strength Development of 3D Printed Thixotropic Concretes During Hardening
2099. Amran Mugahed, Abdelgader Hakim, Onaizi Ali, Fediuk Roman et al. (2021-12)
      3D Printable Alkali-Activated Concretes for Building Applications:
      A Critical Review
2100. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-12)
      Numerical Modelling-Strategies for Reinforced 3D Concrete Printed Elements
2101. Malan Jean, Rooyen Algurnon, Zijl Gideon (2021-12)
      Chloride-Induced Corrosion and Carbonation in 3D Printed Concrete
2102. Yang Yekai, Wu Chengqing, Liu Zhongxian, Zhang Hai (2021-12)
      3D Printing Ultra-High-Performance Fiber-Reinforced Concrete under Triaxial Confining Loads
2103. Sun Xiaoyan, Ye Boxing, Lin Kangjian, Wang Hailong (2021-12)
      Shear-Performance of 3D Printed Concrete Reinforced with Flexible or Rigid Materials Based on Direct-Shear-Test
2104. Yue Hongfei, Hua Sudong, Qian Hao, Yao Xiao et al. (2021-12)
      Investigation on Applicability of Spherical Electric Arc-Furnace-Slag as Fine Aggregate in Superplasticizer-Free 3D Printed Concrete
2105. Cho Seung, Rooyen Algurnon, Kearsley Elsabe, Zijl Gideon (2021-12)
      Foam Stability of 3D Printable Foamed Concrete
2106. Zhang Ying, Wan Zhiming, Wu Lei (2021-12)
      Study on Mechanical Properties of In-Situ Printed Reinforced Concrete Wall with Core Column
2107. Batikha Mustafa, Jotangia Rahul, Baaj Mohamad, Mousleh Ibrahim (2021-12)
      3D Concrete Printing for Sustainable and Economical Construction:
      A Comparative Study
2108. Tavangar Tooran, Hosseinpoor Masoud, Yahia Ammar, Khayat Kamal (2021-12)
      Novel Tri-Viscous-Model to Simulate Pumping of Flowable Concrete Through Characterization of Lubrication-Layer and Plug-Zones
2109. Liu Junli, Li Shuai, Fox Kate, Tran Jonathan (2021-12)
      3D Concrete Printing of Bio-Inspired Bouligand Structure:
      A Study on Impact-Resistance
2110. Nguyen Vuong, Choudhry Niranjan, Panda Biranchi, Nguyen-Xuan Hung et al. (2021-12)
      Performance of Concrete Beam Reinforced with 3D Printed Bio-Inspired Primitive Scaffold Subjected to Three-Point Bending
2111. Şahin Hatice, Mardani Ali (2021-12)
      Assessment of Materials, Design Parameters and Some Properties of 3D Printing Concrete Mixtures:
      A State of the Art Review
2112. Kajzr Daniel, Břoušek Josef, Petr Tomas, Beran Leoš et al. (2021-12)
      New Design of PLC-Based Robotic Control System for Concrete Printing in Building Construction
2113. Pierson Matthew, Pinkerton Luke (2021-12)
      Direct Tension Testing of Plain and Fiber-Reinforced Concrete for Use in Additive Construction
2114. Stidwell Samuel, Kreiger Eric (2021-12)
      Determination of Mechanical Properties of Additively Constructed Concrete Based on Specimen-Orientation
2115. Xu Zhisong, Li Zhuguo, Jiang Fei (2021-11)
      Numerical Approach to Pipe Flow of Fresh Concrete Based on MPS Method
2116. Wang Hailong, Shao Jianwen, Zhang Jing, Zou Daoqin et al. (2021-11)
      Bond Shear Performances and Constitutive Model of Interfaces Between Vertical and Horizontal Filaments of 3D Printed Concrete
2117. Yuan Philip, Zhan Qiang, Wu Hao, Beh Hooi et al. (2021-11)
      Real-Time Tool-Path-Planning and Extrusion-Control-Method for Variable-Width 3D Concrete Printing
2118. Jiao Dengwu, Shi Caijun, Schutter Geert (2021-11)
      Magneto-Rheology-Control in 3D Concrete Printing:
      A Rheological Attempt
2119. Ramyar Elham, Cusatis Gianluca (2021-11)
      Discrete Fresh Concrete-Model for Simulation of Ordinary, Self-Consolidating, and Printable Concrete-Flow
2120. Nair Sooraj, Sant Gaurav, Neithalath Narayanan (2021-11)
      Mathematical Morphology-Based Point-Cloud-Analysis-Techniques for Geometry-Assessment of 3D Printed Concrete Elements
2121. Ma Lei, Zhang Qing, Jia Zijian, Liu Chao et al. (2021-11)
      Effect of Drying Environment on Mechanical Properties, Internal RH and Pore-Structure of 3D Printed Concrete
2122. Liu Junli, Li Shuai, Gunasekara Chamila, Fox Kate et al. (2021-11)
      3D Printed Concrete with Recycled Glass:
      Effect of Glass Gradation on Flexural Strength and Microstructure
2123. Lauff Philipp, Pugacheva Polina, Rutzen Matthias, Weiss Ursula et al. (2021-11)
      Evaluation of the Behavior of Carbon-Short-Fiber-Reinforced Concrete (CSFRC) Based on a Multi-Sensory Experimental Investigation and a Numerical Multi-Scale Approach
2124. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2021-11)
      Influence of Substrate-Surface-Roughness and Moisture-Content on Tensile Adhesion Performance of 3D Printable Concrete
2125. Giudice Lorenzo, Wróbel Rafał, Katsamakas Antonios, Leinenbach Christian et al. (2021-11)
      Physical Modelling of Reinforced Concrete at a 1:40-Scale Using Additively Manufactured Reinforcement Cages
2126. Napolitano Rosanna, Forni Daniele, Menna Costantino, Asprone Domenico et al. (2021-11)
      Dynamic Characterization of the Layer-Interface Properties of 3D Printed Concrete Elements
2127. Liu Chao, Zhang Rongfei, Liu Huawei, He Chunhui et al. (2021-11)
      Analysis of the Mechanical Performance and Damage Mechanism for 3D Printed Concrete Based on Pore-Structure
2128. Liu Xuanting, Sun Bohua (2021-11)
      The Influence of Interface on the Structural Stability in 3D Concrete Printing Processes
2129. Kocherla Amarteja, Kamakshi Tippabhotla, Subramaniam Kolluru (2021-11)
      In-Situ Embedded PZT Sensor for Monitoring 3D Concrete Printing:
      Application in Alkali-Activated Fly-Ash-Slag Geopolymers
2130. Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
      A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing
2131. Tam Vo, Hien Do, Luan Phan, Tran Van et al. (2021-11)
      3D Concrete Printing-Material:
      Preliminary Study
2132. Rennen Philipp, Khader Noor, Hack Norman, Kloft Harald (2021-11)
      A Hybrid Additive Manufacturing Approach:
      Combining Additive Manufacturing and Green-State Concrete Milling to Create a Functionally Integrated Loadbearing Concrete Panel System
2133. Shaker Aya, Khader Noor, Reiter Lex, Anton Ana-Maria (2021-11)
      3D Printed Concrete Tectonics
2134. Bruce Mackenzie, Clune Gabrielle, Xie Ruxin, Mozaffari Salma et al. (2021-11)
      Cocoon:
      3D Printed Clay Formwork for Concrete Casting
2135. Pekuss Raitis, Ancupane Amelija, Soto Borja (2021-11)
      Quantifying the Complexity of 3D Printed Concrete Elements
2136. Placzek Gerrit, Brohmann Leon, Mawas Karam, Schwerdtner Patrick et al. (2021-11)
      A Lean-Based Production Approach for Shotcrete 3D Printed Concrete Components
2137. Ahmed Zeeshan, Wolfs Robert, Bos Freek, Salet Theo (2021-11)
      A Framework for Large-Scale Structural Applications of 3D Printed Concrete:
      The Case of a 29m Bridge in the Netherlands
2138. Dittel Gözdem, Scheurer Martin, Dringenberg Steffen, Jitton Joaquin et al. (2021-11)
      Digital Concrete Production with Vertical Textile Reinforcement
2139. Ivaniuk Egor, Müller Steffen, Neef Tobias, Mechtcherine Viktor (2021-11)
      Strategies for Integrating Reinforcement Into 3D Concrete Printing at the TU Dresden
2140. Straßer Alexander, Weger Daniel, Matthäus Carla, Kränkel Thomas et al. (2021-11)
      Combining Wire and Arc Additive Manufacturing and Selective Paste-Intrusion for Additively Manufactured Structural Concrete
2141. Neef Tobias, Mechtcherine Viktor (2021-11)
      Simultaneous Integration of Continuous Mineral-Bonded Carbon Reinforcement Into Additive Manufacturing with Concrete
2142. Becker Mirco (2021-11)
      Felt-Concrete Composites in Architecture and Design
2143. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Tittelboom Kim et al. (2021-11)
      Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping-Strategy
2144. Antoni Antoni, Agraputra A., Teopilus D., Sunaryo A. et al. (2021-11)
      Investigation of the Material-Mixtures and Fiber-Addition for 3D Concrete Printing
2145. Salleh Norhafizah, Jamalulail Nur, Abdul Hamid Noor, Jamellodin Zalipah et al. (2021-11)
      New Technology in 3D Concrete Printing by Using Ground-Granulated Blast-Furnace-Slag:
      A Review
2146. Murcia Heras, Abdellatef Mohammed, Genedy Moneeb, Taha Mahmoud (2021-11)
      Rheological Characterization of Three-Dimensional-Printed Polymer Concrete
2147. Tao Yaxin, Vantyghem Gieljan, Lesage Karel, Yuan Yong et al. (2021-11)
      Adhesion Properties of Printable Polymer-Modified Concrete for Rock Tunnel Linings
2148. Tavangar Tooran, Hosseinpoor Masoud, Yahia Ammar, Khayat Kamal (2021-11)
      Computational Investigation of Concrete-Pipe-Flow:
      Critical Review
2149. Markin Slava, Schröfl Christof, Blankenstein Paul, Mechtcherine Viktor (2021-11)
      Three-Dimensional-Printed Wood-Starch Composite as Support Material for 3D Concrete Printing
2150. Kruger Jacques, Cho Seung, Bester Frederick, Rooyen Algurnon et al. (2021-11)
      Nano-Technology for Improved Three-Dimensional Concrete Printing Constructability
2151. Douba Ala, Kawashima Shiho (2021-11)
      Use of Nano-Clays and Methylcellulose to Tailor Rheology for Three-Dimensional Concrete Printing
2152. Liu Yu, Jing Rui, Cao Fengze, Yan Peiyu (2021-11)
      Effects of Aggregate Content on Rheological Properties of Lubrication-Layer and Pumping Concrete
2153. Ko Lesley, Moro Sandro, Bury Jeff, Vickers Tom et al. (2021-11)
      Rheology and Setting Control of Concrete for Digital Construction
2154. Sonebi Mohammed, Dedenis Marie, Abdalqader Ahmed, Perrot Arnaud (2021-11)
      Effect of Red Mud, Nano-Clay, and Natural Fiber on Fresh and Rheological Properties of Three-Dimensional Concrete Printing
2155. Fischer Gregor, Paegle Ieva (2021-11)
      Reinforcement of Three-Dimensional-Printed Concrete Structures by Weaving and Knitting of Continuous Fibers and Wires
2156. Pattaje Sooryanarayana Karthik, Hawkins Kathleen, Stynoski Peter, Lange David (2021-11)
      Controlling Three-Dimensional-Printable Concrete with Vibration
2157. Lee Hojae, Seo Eun-A, Kim Won-Woo, Moon Jae-Heum (2021-10)
      Experimental Study on Time-Dependent Changes in Rheological Properties and Flow-Rate of 3D Concrete Printing Materials
2158. Lyu Fuyan, Zhao Dongliang, Hou Xiaohui, Sun Li et al. (2021-10)
      Overview of the Development of 3D Printing Concrete:
      A Review
2159. Li Zhijian, Ma Guowei, Wang Fang, Wang Li et al. (2021-10)
      Expansive Cementitious Materials to Improve Micro-Cable-Reinforcement Bond in 3D Concrete Printing
2160. Blagojevic Boris, Schonemann Benjamin, Nigl David, Blandini Lucio et al. (2021-10)
      Trajectory-Planning for Concrete Element Fabrication with Optimal Control
2161. Sesetti Harika, Lalithya Muthina, Kumar Pala (2021-10)
      3D Concrete Printing in Construction Industry:
      A State of the Art
2162. Rollakanti Chiranjeevi, Prasad C., Joe Adams (2021-10)
      Digital Concrete for Sustainable Construction Industry:
      A State of the Art Review
2163. Prasad C. (2021-10)
      3D Concrete Printing Technology Current Progress and Future Perspective:
      A State of the Art Review
2164. Frangez Valens, Lloret-Fritschi Ena, Taha Nizar, Gramazio Fabio et al. (2021-10)
      Depth-Camera-Based Rebar Detection and Digital Reconstruction for Robotic Concrete Spraying
2165. Rahul Attupurathu, Mohan Manu, Schutter Geert, Tittelboom Kim (2021-10)
      3D Printable Concrete with Natural and Recycled Coarse Aggregates:
      Rheological, Mechanical and Shrinkage Behavior
2166. Xiao Jianzhuang, Chen Zixuan, Ding Tao, Zou Shuai (2021-10)
      Bending Behavior of Steel-Cable-Reinforced 3D Printed Concrete in the Direction Perpendicular to the Interfaces
2167. Yang Yekai, Wu Chengqing, Liu Zhongxian, Wang Hailiang et al. (2021-10)
      Mechanical Anisotropy of Ultra-High-Performance Fiber-Reinforced Concrete for 3D Printing
2168. Shahzad Qamar, Shen Junyi, Naseem Rabia, Yao Yonggang et al. (2021-10)
      Influence of Phase-Change-Material on Concrete Behavior for Construction 3D Printing
2169. Mai (née Dressler) Inka, Brohmann Leon, Freund Niklas, Gantner Stefan et al. (2021-10)
      Large Particle 3D Concrete Printing:
      A Green and Viable Solution
2170. Han Xiaoyu, Yan Jiachuan, Liu Mingjian, Huo Liang et al. (2021-10)
      Experimental Study on Large-Scale 3D Printed Concrete Walls Under Axial Compression
2171. Spangenberg Jon, Silva Wilson, Comminal Raphaël, Mollah Md. et al. (2021-10)
      Numerical Simulation of Multi-Layer 3D Concrete Printing
2172. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Khayat Kamal et al. (2021-10)
      Digital Fabrication of Eco-Friendly Ultra-High-Performance Fiber-Reinforced Concrete
2173. Zhang Nan, Xia Ming, Sanjayan Jay (2021-10)
      Short-Duration Near-Nozzle Mixing for 3D Concrete Printing
2174. Tran Mien, Cu Yen, Le Chau (2021-10)
      Rheology and Shrinkage of Concrete Using Polypropylene-Fiber for 3D Concrete Printing
2175. Uribe-Pinzon Sebastian, Mosquera Mariana, Cardenas-Pulido Jhon, Higuera Camilo (2021-10)
      Advances and Current Trends on the Use of 3D Printed Concrete for Building Fabrication
2176. Wolfs Robert, Salet Theo, Roussel Nicolas (2021-10)
      Filament-Geometry-Control in Extrusion-Based Additive Manufacturing of Concrete:
      The Good, the Bad and the Ugly
2177. Poudelet Louison, Castellví A., Calvo Laura, Cardona Roger et al. (2021-10)
      Presentation of a Concrete Additive Manufacturing Extruder with On-Line Rheology Modification Capabilities
2178. Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-09)
      Energy Performance of 3D Printed Concrete Walls:
      A Numerical Study
2179. Ranaudo Francesco, Mele Tom, Block Philippe (2021-09)
      A Low-Carbon, Funicular Concrete Floor System:
      Design and Engineering of the HiLo Floor
2180. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2021-09)
      Developing Mix Proportions for Class C Fly-Ash-Based Alkali-Activated 3D Printed Concrete Mixtures
2181. Gebhard Lukas, Mata-Falcón Jaime, Markić Tomislav, Kaufmann Walter (2021-09)
      Aligned Inter-Layer Fiber-Reinforcement for Digital Fabrication with Concrete
2182. Stoiber Nadine, Kromoser Benjamin (2021-09)
      Pushing Concrete Material-Usage to the Limit:
      Weight-Optimized, 3D Printed Concrete Girders with External Reinforcement
2183. Nedjar Boumediene (2021-09)
      Incremental Viscoelasticity at Finite Strains for the Modelling of 3D Concrete Printing
2184. Nováková Kateřina, Vele Jiří (2021-09)
      Prvok:
      An Experiment with 3D Printing Large Doublecurved Concrete Structure
2185. Zhan Qiang, Wu Hao, Zhang Liming, Yuan Philip et al. (2021-09)
      3D Concrete Printing with Variable-Width Filament
2186. Lindner Marco, Scharf‐Wildenhain Ronny, Gliniorz Ralf, Vanselow Konrad et al. (2021-09)
      Calibration Method for Constant Strands of Material with Robotassisted Concrete Extrusion
2187. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2021-09)
      Particle-Finite-Element-Simulation of Extrusion-Processes of Fresh Concrete During 3D Concrete Printing
2188. Galeote Eduardo, Fuente Albert (2021-09)
      Novel Compressive Constitutive-Model for 3D Printed Concrete
2189. Som Debadri, Zanotti Cristina (2021-09)
      Effect of Nano-Additives and Polymeric Viscosity-Modifying-Admixtures (VMA) on the Fresh and Hardened Properties of 3D Printable Concrete Mixtures
2190. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-09)
      Inter-Layer Bond and Porosity of 3D Printed Concrete
2191. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2021-09)
      Modelling the Inter-Layer Bond Strength of 3D Printed Concrete with Surface Moisture
2192. Mechtcherine Viktor, Mai (née Dressler) Inka, Empelmann Martin, Gehlen Christoph et al. (2021-09)
      Digital Concrete Construction by Means of Additive Processes:
      State of the Art and Research Needs
2193. Kwon Seung, Jang Kyong, Lee Jung (2021-09)
      External Injection Method for Improvement of Concrete Pumpability
2194. Gülle Nur, Selçuk Semra (2021-08)
      A Bibliometric Analysis on 3D Printed Concrete in Architecture
2195. Baghdadi Abtin, Dörrie Robin, Kloft Harald (2021-08)
      New Calculation Approach for Selecting and Orienting the Reinforcing Material for Robotic Concrete Manufacturing
2196. Liu Chenkang, Yue Songlin, Zhou Cong, Sun Honglei et al. (2021-08)
      Anisotropic Mechanical Properties of Extrusion-Based 3D Printed Layered Concrete
2197. Zhang Yifan, Aslani Farhad (2021-08)
      Development of Fiber-Reinforced Engineered Cementitious Composite Using Polyvinyl-Alcohol-Fiber and Activated Carbon-Powder for 3D Concrete Printing
2198. Ramakrishnan Sayanthan, Muthukrishnan Shravan, Sanjayan Jay, Pasupathy Kirubajiny (2021-08)
      Concrete 3D Printing of Lightweight Elements Using Hollow-Core Extrusion of Filaments
2199. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2021-08)
      Experimental Calibration and Compensation for the Continuous Effect of Time, Number of Layers and Volume of Material on Shape Deformation in Small-Scale Additive Manufacturing of Concrete
2200. Forcael Eric, Pérez Javier, Vásquez Álvaro, García-Alvarado Rodrigo et al. (2021-08)
      Development of Communication Protocols Between BIM Elements and 3D Concrete Printing
2201. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2021-08)
      In-Process Reinforcing Method:
      Dual 3D Printing Procedure for Ultra-High-Performance Concrete Reinforced Cementitious Composites
2202. Wu Yiwen, Liu Chao, Liu Huawei, Zhang Zhenzi et al. (2021-07)
      Study on the Rheology and Buildability of 3D Printed Concrete with Recycled Coarse Aggregates
2203. Scheurer Martin, Quenzel Philipp, Nölke Peter, Reuter‐Schniete Jonas et al. (2021-07)
      Investigating the Feasibility of Using Carbon Fiber Tapes as Reinforcement for 3D Concrete Printing
2204. Duarte Gonçalo, Brown Nathan, Memari Ali, Duarte José (2021-07)
      Learning from Historical Structures under Compression for Concrete 3D Printing Construction
2205. Wang Li, Ma Guowei, Liu Tianhao, Buswell Richard et al. (2021-07)
      Inter-Layer Reinforcement of 3D Printed Concrete by the In-Process Deposition of U-Nails
2206. Geetha S., Selvakumar M., Lakshmi S. (2021-07)
      3D Concrete Printing Matrix Reinforced with Geogrid
2207. Kreiger Megan (2021-07)
      Go Big or Go Home:
      Printing Concrete Buildings
2208. Nedjar Boumediene (2021-07)
      On a Geometrically Non-Linear Incremental Formulation for the Modeling of 3D Concrete Printing
2209. Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-07)
      Fire-Resistance of 3D Printed Concrete Composite Wall Panels Exposed to Various Fire Scenarios
2210. Oktaviani Astiti, Berawi Mohammed (2021-07)
      Implementation of 3D Concrete Printing Technology in Pre-Cast Concrete Mass Production Industry
2211. Shen Wenkai, Yuan Qiang, Shi Caijun, Ji Youhong et al. (2021-07)
      Influence of Pumping on the Resistivity Evolution of High-Strength Concrete and Its Relation to the Rheology
2212. Lowke Dirk, Vandenberg Aileen, Pierre Alexandre, Thomas Amaury et al. (2021-07)
      Injection 3D Concrete Printing in a Carrier Liquid:
      Underlying Physics and Applications to Lightweight Space Frame Structures
2213. Rehman Atta, Kim Jung-Hoon (2021-07)
      3D Concrete Printing:
      A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
2214. Yu Shiwei, Xia Ming, Sanjayan Jay, Yang Lin et al. (2021-07)
      Microstructural Characterization of 3D Printed Concrete
2215. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-07)
      Mechanical Characterisation for Numerical Simulation of Extrusion-Based 3D Concrete Printing
2216. Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
      From Analytical Methods to Numerical Simulations:
      A Process Engineering Toolbox for 3D Concrete Printing
2217. Karpova Ekaterina, Skripkiūnas Gintautas, Sedova Anastasiia, Tsimbalyuk Yelyzaveta (2021-07)
      Additive Manufacturing of Concrete Wall-Structures
2218. Fataei Shirin, Secrieru Egor, Mechtcherine Viktor, Roussel Nicolas (2021-07)
      A First-Order Physical Model for the Prediction of Shear-Induced Particle-Migration and Lubricating-Layer Formation During Concrete Pumping
2219. Liu Chao, Wang Xianggang, Chen Yuning, Zhang Chao et al. (2021-06)
      Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Stability, Rheological Properties, and Printability of 3D Printing Foam-Concrete
2220. Bhattacherjee Shantanu, Basavaraj Anusha, Rahul Attupurathu, Santhanam Manu et al. (2021-06)
      Sustainable Materials for 3D Concrete Printing
2221. Shen Wenkai, Shi Caijun, Khayat Kamal, Yuan Qiang et al. (2021-06)
      Change in Fresh Properties of High-Strength Concrete Due to Pumping
2222. Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
      Mix-Design Concepts for 3D Printable Concrete:
      A Review
2223. Ko Chien-Ho (2021-06)
      Constraints and Limitations of Concrete 3D Printing in Architecture
2224. Babafemi Adewumi, Kolawole John, Miah Md, Paul Suvash et al. (2021-06)
      A Concise Review on Inter-Layer Bond Strength in 3D Concrete Printing
2225. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2021-06)
      Technologies for Improving Buildability in 3D Concrete Printing
2226. Sun Junbo, Aslani Farhad, Lu Jenny, Wang Lining et al. (2021-06)
      Fiber-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing
2227. Hierden Naomi, Gauvin Florent, Lucas Sandra, Salet Theo et al. (2021-06)
      Use of Hemp-Fibers in 3D Printed Concrete
2228. Jørgensen Henrik, Douglas Philip, Naboni Roberto (2021-06)
      Experimental Study on the Anisotropic Behavior and Strength of 3D Printed Concrete
2229. Markin Slava, Krause Martin, Otto Jens, Schröfl Christof et al. (2021-06)
      3D Printing with Foam-Concrete:
      From Material Design and Testing to Application and Sustainability
2230. Kinnell Peter, Dobrzanski James, Xu Jie, Wang Weiqiang et al. (2021-06)
      Precision Manufacture of Concrete Parts Using Integrated Robotic 3D Printing and Milling
2231. Prasittisopin Lapyote, Sakdanaraseth Thanut, Horayangkura Vimolsiddhi (2021-06)
      Design and Construction Method of a 3D Concrete Printing Self-Supporting Curvi-Linear Pavilion
2232. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-06)
      Fire Performance of Innovative 3D Printed Concrete Composite Wall Panels:
      A Numerical Study
2233. Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
      Large-Scale 3D Printing Concrete Technology:
      Current Status and Future Opportunities
2234. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2021-06)
      Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete:
      Correction
2235. Said F., Eldwib Donia, Zaytoun M., Elsalam A. et al. (2021-05)
      3D Printing Concrete Incoroprating Environmentally Friendly Materials
2236. Anane Walid, Iordanova Ivanka, Ouellet-Plamondon Claudiane (2021-05)
      The Use of BIM for Robotic 3D Concrete Printing
2237. Wu Yuching, Yang Qianfan, Kong Xiangrui, Zhi Peng et al. (2021-05)
      Uncertainty Quantification for the Representative Volume Element of Geometrically Mono-Clinic 3D Printed Concrete
2238. Sun Junbo, Huang Yimiao, Aslani Farhad, Wang Xiangyu et al. (2021-05)
      Mechanical Enhancement for EMW-Absorbing Cementitious Material Using 3D Concrete Printing
2239. Chen Yidong, Zhang Yunsheng, Pang Bo, Liu Zhiyong et al. (2021-05)
      Extrusion-Based 3D Printing Concrete with Coarse Aggregate:
      Printability and Direction-Dependent Mechanical Performance
2240. Javed Ali, Mantawy Islam, Azizinamini Atorod (2021-05)
      3D Printing of Ultra-High-Performance Concrete for Robotic Bridge Construction
2241. Schmidt Albrecht, Mengesha Meron, Göbel Luise, Könke Carsten et al. (2021-05)
      Numerical Modeling of an Extrusion-Based Concrete Printing Process Considering Spatially and Temporarily Varying Material and Process Parameters
2242. Hoffmann Marcin, Żarkiewicz Krzysztof, Zieliński Adam, Skibicki Szymon et al. (2021-05)
      Foundation Piles:
      A New Feature for Concrete 3D Printers
2243. Tarhan Yeşim, Craveiro Flávio, Bártolo Helena (2021-05)
      An Effective Solution for Reinforcing 3D Concrete Printable Composites
2244. Xiao Jianzhuang, Han Nv, Zhang Lihai, Zou Shuai (2021-05)
      Mechanical and Microstructural Evolution of 3D Printed Concrete with Polyethylene-Fiber and Recycled Sand at Elevated Temperatures
2245. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2021-05)
      Extrusion Rheometer for 3D Concrete Printing
2246. Chang Ze, Xu Yading, Chen Yu, Gan Yidong et al. (2021-05)
      A Discrete Lattice-Model for Assessment of Buildability Performance of 3D Printed Concrete
2247. Adaloudis Max, Bonnin Roca Jaime (2021-05)
      Sustainability Tradeoffs in the Adoption of 3D Concrete Printing in the Construction Industry
2248. Salman Nazar, Ma Guowei, Ijaz Nauman, Wang Li (2021-04)
      Importance and Potential of Cellulosic Materials and Derivatives in Extrusion-Based 3D Concrete Printing:
      Prospects and Challenges
2249. Mechtcherine Viktor (2021-04)
      Digital Building:
      3D Printing with Concrete
2250. Chung Jihoon, Lee Ghang, Kim Jung-Hoon (2021-04)
      Framework for Technical Specifications of 3D Concrete Printers
2251. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2021-04)
      Structural Behavior of 3D Printed Concrete Beams with Various Reinforcement-Strategies
2252. Bong Shin, Xia Ming, Nematollahi Behzad, Shi Caijun (2021-04)
      Ambient Temperature Cured ‘Just-Add-Water’ Geopolymer for 3D Concrete Printing Applications
2253. Khajavi Siavash, Tetik Müge, Mohite Ashish, Peltokorpi Antti et al. (2021-04)
      Additive Manufacturing in the Construction Industry:
      The Comparative Competitiveness of 3D Concrete Printing
2254. Ghourchian Sadegh, Butler Marko, Krüger Markus, Mechtcherine Viktor (2021-04)
      Modelling the Development of Capillary Pressure in Freshly 3D Printed Concrete Elements
2255. Zhu Binrong, Nematollahi Behzad, Pan Jinlong, Zhang Yang et al. (2021-04)
      3D Concrete Printing of Permanent Formwork for Concrete Column Construction
2256. Baz Bilal, Aouad Georges, Kleib Joelle, Bulteel David et al. (2021-04)
      Durability-Assessment and Micro-Structural Analysis of 3D Printed Concrete Exposed to Sulfuric-Acid Environments
2257. Marchment Taylor, Sanjayan Jay (2021-04)
      Reinforcement Method for 3D Concrete Printing Using Paste-Coated Bar Penetrations
2258. Li Chenshu, Zhou Xiaoyan, Liu Xingyu (2021-04)
      Integrating the Bio-Digital Aesthetic Value and Architecture Potential of Rapid-Liquid-Printed-Concrete 3D Printing Technology
2259. Dielemans Gido, Briels David, Jaugstetter Fabian, Henke Klaudius et al. (2021-04)
      Additive Manufacturing of Thermally Enhanced Lightweight Concrete Wall Elements with Closed Cellular Structures
2260. Wang Li, Liu Yi, Yang Yu, Li Yanfeng et al. (2021-04)
      Bonding Performance of 3D Printing Concrete with Self-Locking Interfaces Exposed to Compression-Shear and Compression-Splitting Stresses
2261. Zhan Qiang, Zhou Xinjie, Yuan Philip, Zhou Xinjie (2021-04)
      Design and Fabrication of a 3D Concrete Printed Pre-Stressed Bridge
2262. Breseghello Luca, Sanin Sandro, Naboni Roberto (2021-04)
      Tool-Path Simulation, Design and Manipulation in Robotic 3D Concrete Printing
2263. Bai Gang, Wang Li, Ma Guowei, Sanjayan Jay et al. (2021-03)
      3D Printing Eco-Friendly Concrete Containing Under-Utilised and Waste Solids as Aggregates
2264. Helsel Michelle, Popovics John, Stynoski Peter, Kreiger Eric (2021-03)
      Non-Destructive Testing to Characterize Inter-Layer Bonds of Idealized Concrete Additive Manufacturing Products
2265. Sun Jingting, Xiao Jianzhuang, Li Zhengrong, Feng Xiwen (2021-03)
      Experimental Study on the Thermal Performance of a 3D Printed Concrete Prototype Building
2266. Marais Hannelie, Christen Heidi, Cho Seung, Villiers Wibke et al. (2021-03)
      Computational Assessment of Thermal Performance of 3D Printed Concrete Wall Structures with Cavities
2267. Lesovik Valeriy, Tolypina Natalia, Glagolev Evgeniy, Tolypin Daniil (2021-03)
      Reuse of 3D Additive Manufacturing Concrete Scrap in Construction
2268. Ding Tao, Xiao Jianzhuang, Zou Shuai, Yu Jiangtao (2021-03)
      Flexural Properties of 3D Printed Fiber-Reinforced Concrete with Recycled Sand
2269. Cohen Zach (2021-03)
      Recasting Concrete:
      A Case Study in Concrete 3D Printing as an Architectural Pedagogy
2270. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Pereira Eduardo et al. (2021-03)
      Influence of the Printing-Direction and Age on the Mechanical Properties of 3D Printed Concrete
2271. Katzer Jacek, Skoratko Aneta (2021-03)
      Concept of Using 3D Printing for Production of Concrete-Plastic Columns with Unconventional Cross-Sections
2272. Cho Seung, Kruger Jacques, Rooyen Algurnon, Zijl Gideon (2021-03)
      Rheology and Application of Buoyant Foam-Concrete for Digital Fabrication
2273. Krčma Martin, Škaroupka David, Vosynek Petr, Zikmund Tomáš et al. (2021-02)
      Use of Polymer Concrete for Large-Scale 3D Printing
2274. Canou Joseph, Uhart Maylis, Diaz Pierre (2021-02)
      A “Low-Cost” Subtractive Method for Freshly Finished 3D Concrete Printed Structures
2275. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-02)
      Numerical Study of Fire and Energy Performance of Innovative Lightweight 3D Printed Concrete Wall-Configurations in Modular Building System
2276. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-02)
      Effect of Polyethylene-Fiber Content on Workability and Mechanical-Anisotropic Properties of 3D Printed Ultra-High-Ductile Concrete
2277. Kondepudi Kala, Subramaniam Kolluru (2021-02)
      Formulation of Alkali-Activated Fly-Ash-Slag Binders for 3D Concrete Printing
2278. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2021-02)
      Fiber-Orientation Effects on Ultra-High-Performance Concrete Formed by 3D Printing
2279. Weng Yiwei, Mohamed Nisar, Lee Brian, Gan Nicole et al. (2021-02)
      Extracting BIM Information for Lattice Tool-Path-Planning in Digital Concrete Printing with Developed Dynamo Script:
      A Case Study
2280. Muñiz Manuel, Chantin Marjorie, Vintila Cristian, Fabritius Marc et al. (2021-02)
      Concrete Hybrid Manufacturing:
      A Machine Architecture
2281. Lim Jian, Zhang Xu, Ting Guan, Pham Quang-Cuong (2021-02)
      Stress-Cognizant 3D Printing of Free-Form Concrete Structures
2282. Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
      Integrating Reinforcement in Digital Fabrication with Concrete:
      A Review and Classification Framework
2283. Meurer Maximilian, Claßen Martin (2021-02)
      Mechanical Properties of Hardened 3D Printed Concretes and Mortars:
      Development of a Consistent Experimental Characterization-Strategy
2284. Álvarez-Fernández Martina, Prendes-Gero María, González-Nicieza Celestino, Guerrero-Miguel Diego-José et al. (2021-02)
      Optimum Mix-Design for 3D Concrete Printing Using Mining-Tailings:
      A Case Study in Spain
2285. Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2021-02)
      Effect of Printing Parameters on Material-Distribution in Spray-Based 3D Concrete Printing (S-3DCP)
2286. Krishnaraja A., Guru K. (2021-02)
      3D Printing Concrete:
      A Review
2287. Ramadany Mohamed, Bajjou Mohamed (2021-01)
      Applicability and Integration of Concrete Additive Manufacturing in Construction Industry:
      A Case Study
2288. Liu Miao, Zhang Qiyun, Tan Zhendong, Wang Li et al. (2021-01)
      Investigation of Steel-Wire-Mesh-Reinforcement Method for 3D Concrete Printing
2289. Rubin Ariane, Hasse Jéssica, Repette Wellington (2021-01)
      The Evaluation of Rheological Parameters of 3D Printable Concretes and the Effect of Accelerating-Admixture
2290. Weger Daniel, Gehlen Christoph (2021-01)
      Particle-Bed Binding by Selective Paste-Intrusion:
      Strength and Durability of Printed Fine-Grain Concrete Members
2291. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-01)
      Fresh and Anisotropic-Mechanical Properties of 3D Printable Ultra-High-Ductile Concrete with Crumb-Rubber
2292. Lesovik Valeriy, Glagolev Evgeniy, Elistratkin Michail, Podgorniy Daniil (2021-01)
      On the Issue of Measuring the Strength of Additively Manufactured Concrete
2293. Weng Yiwei, Li Mingyang, Wong Teck, Tan Ming (2021-01)
      Synchronized Concrete and Bonding-Agent-Deposition-System for Inter-Layer Bond Strength Enhancement in 3D Concrete Printing
2294. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-01)
      Early-Age Hydration, Rheology and Pumping Characteristics of CSA Cement-Based 3D Printable Concrete
2295. Tho Tuong, Thinh Nguyen (2021-01)
      Using a Cable-Driven Parallel Robot with Applications in 3D Concrete Printing
2296. Nguyen Vuong, Panda Biranchi, Zhang Guomin, Nguyen-Xuan Hung et al. (2021-01)
      Digital Design Computing and Modelling for 3D Concrete Printing
2297. Muñoz Ivan, Madrid Javier, Muñiz Manuel, Uhart Maylis et al. (2021-01)
      Life Cycle Assessment of Integrated Additive-Subtractive Concrete 3D Printing
2298. Daungwilailuk Totsawat, Pheinsusom Phoonsak, Pansuk Withit (2021-01)
      Uniaxial Load Testing of Large-Scale 3D Printed Concrete Wall and Finite-Element-Model-Analysis
2299. Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
      Improving Performance of Additive Manufactured Concrete:
      A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
2300. Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria (2021-01)
      Evaluation of Material-Modification Using PET in 3D Concrete Printing Technology
2301. Salman Nazar, Ma Guowei, Ijaz Nauman, Wang Li (2021-01)
      Weak Inter-Layer Bonding in Extrusion 3D Concrete Printing:
      A Comparative Analysis of Mitigation Techniques
2302. Plessis Anton, Babafemi Adewumi, Paul Suvash, Panda Biranchi et al. (2020-12)
      Biomimicry for 3D Concrete Printing:
      A Review and Perspective
2303. Mohammad Malek, Masad Eyad, Ghamdi Sami (2020-12)
      3D Concrete Printing Sustainability:
      A Comparative Life Cycle Assessment of Four Construction Method Scenarios
2304. Luhar Salmabanu, Suntharalingam Thadshajini, Navaratnam Satheeskumar, Luhar Ismail et al. (2020-12)
      Sustainable and Renewable Bio-Based Natural Fibers and Its Application for 3D Printed Concrete:
      A Review
2305. Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
      A Review of 3D Printed Concrete:
      Performance-Requirements, Testing Measurements and Mix-Design
2306. Anton Ana-Maria, Reiter Lex, Wangler Timothy, Frangez Valens et al. (2020-12)
      A 3D Concrete Printing Prefabrication Platform for Bespoke Columns
2307. Antoni Antoni, Widjaya David, Wibowo Alexander, Chandra Jimmy et al. (2020-12)
      Using Calcium Oxide and Accelerator to Control the Initial Setting-Time of Mortar in 3D Concrete Printing
2308. Ooms Ticho, Vantyghem Gieljan, Coile Ruben, Corte Wouter (2020-12)
      A Parametric Modelling-Strategy for the Numerical Simulation of 3D Concrete Printing with Complex Geometries
2309. Kruger Jacques, Plessis Anton, Zijl Gideon (2020-12)
      An Investigation into the Porosity of Extrusion-Based 3D Printed Concrete
2310. Vasilić Ksenija (2020-12)
      Additive Manufacturing in Concrete Construction:
      Current Status
2311. Cicione Antonio, Mazolwana K., Kruger Jacques, Walls Richard et al. (2020-12)
      Effect of Transverse and Longitudinal Confinement on the Inter-Layer Bond in 3D Printed Concrete at Elevated Temperatures:
      An Experimental Study
2312. Placzek Gerrit, Schwerdtner Patrick (2020-12)
      Derivation of Integration Approaches for "Concrete 3D Printing" in the Construction Process Based on Features of Additive Manufacturing
2313. Singh P., Sreerag K. (2020-12)
      Additive Manufacturing Through Digital Concrete by Extrusion- and Non-Extrusion-Method
2314. Kaszyńska Maria, Skibicki Szymon, Hoffmann Marcin (2020-12)
      3D Concrete Printing for Sustainable Construction
2315. Bester Frederick, Heever Marchant, Kruger Jacques, Zijl Gideon (2020-11)
      Reinforcing Digitally Fabricated Concrete:
      A Systems Approach Review
2316. Vantyghem Gieljan, Ooms Ticho, Corte Wouter (2020-11)
      VoxelPrint:
      A Grasshopper Plug-In for Voxel-Based Numerical Simulation of Concrete Printing
2317. Ly Océane, Yoris-Nobile Adrian, Sebaibi Nassim, Blanco-Fernandez Elena et al. (2020-11)
      Optimization of 3D Printed Concrete for Artificial Reefs:
      Biofouling and Mechanical Analysis
2318. Jones Scott (2020-11)
      Fused Filament-Fabrication Printer Modified to Dispense Cement-Paste for Concrete Additive Manufacturing Studies
2319. Krotov Oleg, Lazarev Yuriy, Velichkin Viktor, Petrochenko Marina et al. (2020-11)
      The Multi-Storey Concrete Printing Construction Technology
2320. Papacharalampopoulos Alexios, Bikas Harry, Foteinopoulos Panagis, Stavropoulos Panagiotis (2020-11)
      A Path-Planning-Optimization Framework for Concrete-Based Additive Manufacturing Processes
2321. Xiao Jianzhuang, Liu Haoran, Ding Tao (2020-11)
      Finite-Element-Analysis on the Anisotropic Behavior of 3D Printed Concrete under Compression and Flexure
2322. Sanjayan Jay, Jayathilakage Roshan, Rajeev Pathmanathan (2020-11)
      Vibration-Induced Active Rheology-Control for 3D Concrete Printing
2323. Vespalec Arnošt, Novák Josef, Kohoutková Alena, Vosynek Petr et al. (2020-11)
      Interface Behavior and Interface Tensile Strength of a Hardened Concrete Mixture with a Coarse Aggregate for Additive Manufacturing
2324. Neef Tobias, Müller Steffen, Mechtcherine Viktor (2020-11)
      3D Printing with Carbon Concrete:
      Technology and the First Test Results
2325. Bhooshan Shajay, Mele Tom, Block Philippe (2020-11)
      Morph & Slerp:
      Shape Description for 3D Printing of Concrete
2326. Joh Changbin, Lee Jungwoo, Bui The, Park Jihun et al. (2020-11)
      Buildability and Mechanical Properties of 3D Printed Concrete
2327. Baz Bilal, Aouad Georges, Khalil Noura, Rémond Sébastien (2020-11)
      Inter-Layer Reinforcement of 3D Printed Concrete Elements
2328. Sun Xiaoyan, Gao Chao, Wang Hailong (2020-10)
      Bond-Performance Between BFRP-Bars and 3D Printed Concrete
2329. Chung Jihoon, Lee Ghang, Kim Jung-Hoon (2020-10)
      A Systematic Review of the Geographic and Chronological Distributions of 3D Concrete Printers from 1997 to 2020
2330. Mohamed Shibly Maahir, Soto Borja (2020-10)
      Threat Modeling in Construction:
      An Example of a 3D Concrete Printing System
2331. Craveiro Flávio, Bártolo Helena, Duarte José, Bartolo Paulo (2020-10)
      A Multi-Material Extrusion-Nozzle for Functionally-Graded Concrete Printing
2332. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2020-10)
      Extrusion-Based Concrete 3D Printing from a Material Perspective:
      A State of the Art Review
2333. Son Seunghyun, Oh Jinhyuk, Park Kwangheon, Kim Sunkuk (2020-10)
      Production Planning of Free-Form Concrete Panels Using 3D Plastering Technology
2334. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-10)
      Modelling of 3D Concrete Printing Based on Computational Fluid Dynamics
2335. Alchaar Aktham, Tamimi Adil (2020-10)
      Mechanical Properties of 3D Printed Concrete in Hot Temperatures
2336. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2020-10)
      Experimental Prediction of Material-Deformation in Large-Scale Additive Manufacturing of Concrete
2337. Dwivedi Ashutosh, Pal Ankit, Patel Shiv, Chourasia Ajay et al. (2020-10)
      Evaluation of Model 3D Printer and Design Mix for 3D Concrete Printing
2338. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2020-10)
      Development of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction
2339. Kruger Jacques, Zijl Gideon (2020-10)
      A Compendious Review on Lack-of-Fusion in Digital Concrete Fabrication
2340. Lao Wenxin, Li Mingyang, Tjahjowidodo Tegoeh (2020-09)
      Variable-Geometry Nozzle for Surface Quality Enhancement in 3D Concrete Printing
2341. Kuzmenko Kateryna, Gaudillière-Jami Nadja, Féraille Adélaïde, Dirrenberger Justin et al. (2020-09)
      Assessing the Environmental Viability of 3D Concrete Printing Technology
2342. Leschok Matthias, Dillenburger Benjamin (2020-09)
      Sustainable Thin-Shell 3D Printed Formwork for Concrete
2343. Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2020-09)
      3D Printed Concrete for Large-Scale Buildings:
      An Overview of Rheology, Printing Parameters, Chemical Admixtures, Reinforcements, and Economic and Environmental Prospects
2344. Chu Shaohua, Li Leo, Kwan Albert (2020-09)
      Development of Extrudable High-Strength Fiber-Reinforced Concrete Incorporating Nano-Calcium-Carbonate
2345. Heras Murica Daniel, Genedy Moneeb, Taha Mahmoud (2020-09)
      Examining the Significance of Infill-Printing-Pattern on the Anisotropy of 3D Printed Concrete
2346. Geng Zifan, She Wei, Zuo Wenqiang, Lyu Kai et al. (2020-09)
      Layer-Interface Properties in 3D Printed Concrete:
      Dual Hierarchical Structure and Micromechanical Characterization
2347. Anton Ana-Maria, Bedarf Patrick, Yoo Angela, Dillenburger Benjamin et al. (2020-09)
      Concrete Choreography:
      Prefabrication of 3D Printed Columns
2348. Xu Weiguo, Gao Yuan, Sun Chenwei, Wang Zhi (2020-09)
      Fabrication and Application of 3D Printed Concrete Structural Components in the Boshan Pedestrian Bridge Project
2349. Marchment Taylor, Sanjayan Jay (2020-09)
      Bond Properties of Reinforcing Bar Penetrations in 3D Concrete Printing
2350. Hansemann Georg, Schmid Robert, Holzinger Christoph, Tapley Joshua et al. (2020-09)
      Additive Fabrication of Concrete Elements by Robots:
      Lightweight Concrete Ceiling
2351. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-09)
      Effect of Microwave-Heating on Inter-Layer Bonding and Buildability of Geopolymer 3D Concrete Printing
2352. Kloft Harald, Empelmann Martin, Hack Norman, Herrmann Eric et al. (2020-09)
      Reinforcement-Strategies for 3D Concrete Printing
2353. Phadnis Kedar, Shariff Najeeb, Menon Devdas (2020-09)
      Optimal Rate of Printing of 3D Printed Concrete Columns and Walls to Avoid Buckling
2354. Pudjisuryadi Pamuda, Antoni Antoni, Chandra Jimmy (2020-09)
      Review on 3D Printed Concrete as Structural Beam Members
2355. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2020-08)
      Experimental Investigation of Reinforcement-Strategies for Concrete-Extrusion 3D Printed Beams
2356. Han Yilong, Yang Zhihan, Ding Tao, Xiao Jianzhuang (2020-08)
      Environmental and Economic Assessment on 3D Printed Buildings with Recycled Concrete
2357. Smarsly Kay, Peralta Patricia, Luckey Daniel, Heine Sebastian et al. (2020-08)
      BIM-Based Concrete Printing
2358. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2020-08)
      Plastic Shrinkage Cracking in 3D Printed Concrete
2359. Claßen Martin, Claßen Johannes, Sharma Rahul (2020-08)
      Conception of a Real World 3D Printing Method for Reinforced Concrete (AMoRC)
2360. Ding Tao, Xiao Jianzhuang, Zou Shuai, Zhou Xinji (2020-08)
      Anisotropic Behavior in Bending of 3D Printed Concrete Reinforced with Fibers
2361. Wang Shian, Liu Chi, Zhang Guo, Luo Qi et al. (2020-08)
      Digital Planting:
      Fabrication of Integrated Concrete Green Wall via Additive Manufacturing
2362. Makul Natt (2020-07)
      Advanced Smart Concrete:
      A Review of Current Progress, Benefits and Challenges
2363. Yu Shiwei, Du Hongjian, Sanjayan Jay (2020-07)
      Aggregate-Bed 3D Concrete Printing with Cement-Paste Binder
2364. Fioretti Marta, Kompella Sriram, Monte Francesco, Esposito Laura et al. (2020-07)
      Experimental Investigation on the Early-Age Tensile Strength of Fiber-Reinforced Mortar Used in 3D Concrete Printing
2365. Arunothayan Arun, Nematollahi Behzad, Sanjayan Jay, Ranade Ravi et al. (2020-07)
      Quantitative Evaluation of Orientation of Steel-Fibers in 3D Printed Ultra-High-Performance Concrete
2366. Anton Ana-Maria, Jipa Mihail-Andrei, Reiter Lex, Dillenburger Benjamin (2020-07)
      Fast Complexity:
      Additive Manufacturing for Prefabricated Concrete Slabs
2367. Falliano Devid, Crupi Giuseppe, Domenico Dario, Ricciardi Giuseppe et al. (2020-07)
      Investigation on the Rheological Behavior of Lightweight Foamed Concrete for 3D Printing Applications
2368. Hack Norman, Kloft Harald (2020-07)
      Shotcrete 3D Printing Technology for the Fabrication of Slender Fully Reinforced Freeform Concrete Elements with High Surface Quality:
      A Real-Scale Demonstrator
2369. Henke Klaudius, Talke Daniel, Matthäus Carla (2020-07)
      Additive Manufacturing by Extrusion of Lightweight Concrete:
      Strand Geometry, Nozzle Design and Layer Layout
2370. Bhattacherjee Shantanu, Santhanam Manu (2020-07)
      Enhancing Buildability of 3D Printable Concrete by Spraying of Accelerating-Admixture on Surface
2371. Bekkering Juliette, Kuit Barbara, Biffi Alessia, Ahmed Zeeshan (2020-07)
      Architectonic Explorations of the Possibilities of 3D Concrete Printing:
      The Historic Building Fragment as Inspiration for New Applications with 3D Concrete Printing in Architecture
2372. Esposito Laura, Menna Costantino, Asprone Domenico, Rossino Chiara et al. (2020-07)
      An Experimental Testing Procedure to Assess the Buildability Performance of 3D Printed Concrete Elements
2373. Gardner Guy, Forward Kristen, Tse Kim, Sharma Karan (2020-07)
      Rapid Composite Formwork:
      An Automated and Customizable Process for Freeform Concrete Through Computational Design and Robotic Fabrication
2374. Brun Francis, Gaspar Florindo, Mateus Artur, Vitorino João et al. (2020-07)
      Experimental Study on 3D Printing of Concrete with Overhangs
2375. Douba Ala, Chan Clare, Berrios Stephanie, Kawashima Shiho (2020-07)
      Synthesis of Hybridized Rheological Modifiers for 3D Concrete Printing
2376. Grünewald Steffen, Schipper Roel (2020-07)
      Transition from Fluid to Solid Concrete in the Flexible Mould Process
2377. Battaglia Christopher, Miller Martin, Verian Kho (2020-07)
      Print-Cast Concrete:
      Additive Manufacturing for 3D Printing Mortar in Robotically Fabricated Green Sand Molds
2378. Geneidy Omar, Kumarji Sujay, Dubor Alexandre, Sollazzo Aldo (2020-07)
      Simultaneous Reinforcement of Concrete While 3D Printing
2379. Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2020-07)
      Characterizing Extrudability for 3D Concrete Printing Using Discrete Element Simulations
2380. Burger Joris, Lloret-Fritschi Ena, Taha Nizar, Scotto Fabio et al. (2020-07)
      Design and Fabrication of a Non-Standard, Structural Concrete Column Using Eggshell:
      Ultra-Thin, 3D Printed Formwork
2381. Marchment Taylor, Sanjayan Jay (2020-07)
      Penetration Reinforcing Method for 3D Concrete Printing
2382. Pattaje Sooryanarayana Karthik, Stynoski Peter, Lange David (2020-07)
      Effect of Vibration on the Rheology of Concrete for 3D Printing
2383. Pekuss Raitis, Soto Borja (2020-07)
      Preliminary Productivity-Analysis of Conventional, Pre-Cast and 3D Printing Production-Techniques for Concrete Columns with Simple Geometry
2384. Pastore Tommaso, Menna Costantino, Asprone Domenico (2020-07)
      Combining Multiple Loads in a Topology-Optimization Framework for Digitally Fabricated Concrete Structures
2385. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-07)
      Buildability of Geopolymer Concrete for 3D Printing with Microwave-Heating
2386. Liu Yan, Jewett Jackson, Carstensen Josephine (2020-07)
      Experimental Investigation of Topology-Optimized Deep Reinforced Concrete Beams with Reduced Concrete Volume
2387. Napolitano Rosanna, Menna Costantino, Forni Daniele, Asprone Domenico et al. (2020-07)
      Dynamic Behavior of Layered 3D Printed Concrete Elements
2388. Scheurer Martin, Dittel Gözdem, Gries Thomas (2020-07)
      Potential for the Integration of Continuous-Fiber-Based Reinforcements in Digital Concrete Production
2389. Matthäus Carla, Back Daniel, Weger Daniel, Kränkel Thomas et al. (2020-07)
      Effect of Cement-Type and Limestone-Powder-Content on Extrudability of Lightweight Concrete
2390. Napolitano Rosanna, Menna Costantino, Asprone Domenico, Giudice Lorenzo (2020-07)
      Mechanical Characterization of Layer-by-Layer Interface in Concrete Elements Obtained by Additive Manufacturing
2391. Natanzi Atteyeh, McNally Ciaran (2020-07)
      Characterising Concrete Mixes for 3D Printing
2392. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2020-07)
      Numerical Modeling of an Extrusion-Based 3D Concrete Printing-Process Considering a Spatially-Varying Pseudo-Density Approach
2393. Mohammad Malek, Masad Eyad, Seers Thomas, Ghamdi Sami (2020-07)
      High-Performance Lightweight Concrete for 3D Printing
2394. Markin Slava, Ivanova Irina, Fataei Shirin, Reißig Silvia et al. (2020-07)
      Investigation on Structural Build-Up of 3D Printable Foam-Concrete
2395. Naboni Roberto, Breseghello Luca (2020-07)
      High-Resolution Additive Formwork for Building-Scale Concrete Panels
2396. Kuzmenko Kateryna, Féraille Adélaïde, Baverel Olivier, Roussel Nicolas (2020-07)
      Environmental Impacts of 6-Axis Robotic Arm for 3D Concrete Printing
2397. Wang Yu, Li Shuaishuai, Qin Tian, Yu Ying et al. (2020-07)
      Concrete 3D Printing:
      System Development, Process Planning and Experimental Results
2398. Yu Shiwei, Sanjayan Jay, Du Hongjian (2020-07)
      Impact of Particle-Size and Grading on Aggregate-Bed 3D Concrete Printing
2399. Wu Yun-Chen, Cotrell Jason, Li Mo (2020-07)
      Inter-Layer Effect on Fracture Behavior of 3D Printing Concrete
2400. Weger Daniel, Kim Heejeong, Talke Daniel, Henke Klaudius et al. (2020-07)
      Lightweight Concrete 3D Printing by Selective Cement-Activation:
      Investigation of Thermal Conductivity, Strength and Water-Distribution
2401. Vukorep Ilija, Zimmermann Gregor, Sablotny Tino (2020-07)
      Robot-Controlled Fabrication of Sprayed Concrete Elements as a Cyber-Physical-System
2402. Buswell Richard, Kinnell Peter, Xu Jie, Hack Norman et al. (2020-07)
      Inspection Methods for 3D Concrete Printing
2403. Bos Freek, Dezaire Steven, Ahmed Zeeshan, Hoekstra Anne et al. (2020-07)
      Bond of Reinforcement-Cable in 3D Printed Concrete
2404. Kruger Jacques, Cicione Antonio, Bester Frederick, Heever Marchant et al. (2020-07)
      Facilitating Ductile Failure of 3D Printed Concrete Elements in Fire
2405. Ahmed Zeeshan, Biffi Alessia, Hass Lauri, Bos Freek et al. (2020-07)
      3D Concrete Printing:
      Free-Form Geometries with Improved Ductility and Strength
2406. Bester Frederick, Heever Marchant, Kruger Jacques, Cho Seung et al. (2020-07)
      Steel-Fiber Links in 3D Printed Concrete
2407. Hass Lauri, Bos Freek (2020-07)
      Bending and Pull-Out Tests on a Novel Screw Type Reinforcement for Extrusion-Based 3D Printed Concrete
2408. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2020-07)
      Printed Concrete as Formwork-Material:
      A Preliminary Study
2409. Grasser Georg, Pammer Lorenz, Köll Harald, Werner E. et al. (2020-07)
      Complex Architecture in Printed Concrete:
      The Case of the Innsbruck University 350th Anniversary Pavilion COHESION
2410. Heever Marchant, Bester Frederick, Pourbehi Mohammad, Kruger Jacques et al. (2020-07)
      Characterizing the Fissility of 3D Concrete Printed Elements via the Cohesive Zone Method
2411. Wang Weiqiang, Konstantinidis Nikolaos, Austin Simon, Buswell Richard et al. (2020-07)
      Flexural Behavior of AR-Glass-Textile-Reinforced 3D Printed Concrete Beams
2412. Mohan Manu, Rahul Attupurathu, Tittelboom Kim, Schutter Geert (2020-07)
      Evaluating the Influence of Aggregate Content on Pumpability of 3D Printable Concrete
2413. Putten Jolien, Olmen Alex, Aerts Marijke, Ascione Emiel et al. (2020-07)
      3D Concrete Printing On-Site:
      A Novel Way of Building Houses?
2414. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Wangler Timothy et al. (2020-07)
      ACDC:
      The Admixture-Controlled Digital Casting and Its Application to Thin-Folded Concrete Structures
2415. Cho Seung, Kruger Jacques, Bester Frederick, Heever Marchant et al. (2020-07)
      A Compendious Rheo-Mechanical Test for Printability-Assessment of 3D Printable Concrete
2416. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2020-07)
      Influence of Pumping-Extrusion on the Air-Void System of 3D Printed Concrete
2417. Andersen Sebastian, Silva Wilson, Paegle Ieva, Nielsen Jens (2020-07)
      Numerical Model Describing the Early-Age Behavior of 3D Printed Concrete:
      Work in Progress
2418. Carneau Paul, Mesnil Romain, Ducoulombier Nicolas, Roussel Nicolas et al. (2020-07)
      Characterisation of the Layer-Pressing-Strategy for Concrete 3D Printing
2419. Maitenaz Sébastien, Mesnil Romain, Onfroy Paul, Metge Nicolas et al. (2020-07)
      Sustainable Reinforced Concrete Beams:
      Mechanical Optimization and 3D Printed Formwork
2420. Hameed Rashid, Papon Aurélie, Perrot Arnaud, Rangeard Damien (2020-07)
      Effect of Metallic Fibers on the Print Quality and Strength of 3D Printed Concrete
2421. Pfeiffer Sven, Dorn Tobias, Hirsch Tamino, Ehm Clemens et al. (2020-07)
      Architectural Applications and Workflows for Additive Fabrication with Concrete
2422. Costa Eduardo, Shepherd Paul, Orr John, Ibell Tim et al. (2020-07)
      Automating Concrete Construction:
      Digital Design of Non-Prismatic Reinforced Concrete Beams
2423. Putten Jolien, Volder Melissa, Heede Philip, Schutter Geert et al. (2020-07)
      3D Printing of Concrete:
      The Influence on Chloride Penetration
2424. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-07)
      Influence of Processing Parameters on the Layer Geometry in 3D Concrete Printing:
      Experiments and Modelling
2425. Lee Minu, Mata-Falcón Jaime, Popescu Mariana, Block Philippe et al. (2020-07)
      Potential Approaches for Reinforcing Complex Concrete Structures with Integrated Flexible Formwork
2426. Westerlind Helena, Vargas José (2020-07)
      Knitting Concrete
2427. Skibicki Szymon, Kaszyńska Maria, Wahib Nawid, Techman Mateusz et al. (2020-07)
      Properties of Composite Modified with Limestone-Powder for 3D Concrete Printing
2428. Vantyghem Gieljan, Steeman Marijke, Corte Wouter, Boel Veerle (2020-07)
      Design-Optimization for 3D Concrete Printing:
      Improving Structural and Thermal Performances
2429. Hassan Hilal, Najjar Fady, Jassmi Hamad, Ahmed Waleed (2020-07)
      Fresh and Hardened Properties of 3D Printed Concrete Made with Dune Sand
2430. Kloft Harald, Empelmann Martin, Hack Norman, Herrmann Eric et al. (2020-07)
      Strategies for the Reinforcement for 3D-Concrete-Printing
2431. Wan Qian, Wang Li, Ma Guowei (2020-07)
      Adaptable Tool-Path-Planning Method for 3D Concrete Printing Based on the Mapping Method
2432. Suiker Akke, Wolfs Robert, Lucas Sandra, Salet Theo (2020-06)
      Elastic Buckling and Plastic Collapse During 3D Concrete Printing
2433. Ding Tao, Xiao Jianzhuang, Zou Shuai, Wang Yu (2020-06)
      Hardened Properties of Layered 3D Printed Concrete with Recycled Sand
2434. Toklu Yusuf, Bekdaş Gebrail, Geem Zong (2020-06)
      Harmony-Search-Optimization of Nozzle Movement for Additive Manufacturing of Concrete Structures and Concrete Elements
2435. Bos Freek, Wolfs Robert, Salet Theo (2020-06)
      CCR Digital Concrete 2020 SI:
      Editorial
2436. Rehman Atta, Lee Sang-Min, Kim Jung-Hoon (2020-06)
      Use of Municipal Solid-Waste Incineration-Ash in 3D Printable Concrete
2437. Roussel Nicolas, Spangenberg Jon, Wallevik Jon, Wolfs Robert (2020-06)
      Numerical Simulations of Concrete Processing:
      From Standard Formative Casting to Additive Manufacturing
2438. Federowicz Karol, Kaszyńska Maria, Zieliński Adam, Hoffmann Marcin (2020-06)
      Effect of Curing Methods on Shrinkage Development in 3D Printed Concrete
2439. Xu Jie, Buswell Richard, Kinnell Peter, Biro Istvan et al. (2020-06)
      Inspecting Manufacturing Precision of 3D Printed Concrete Parts Based on Geometric Dimensioning and Tolerancing
2440. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schmeier Tobias (2020-06)
      Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete:
      Concept and Feasibility Study
2441. Alhumayani Hashem, Gomaa Mohamed, Soebarto Veronica, Jabi Wassim (2020-06)
      Environmental Assessment of Large-Scale 3D Printing in Construction:
      A Comparative Study between Cob and Concrete
2442. Claßen Martin, Ungermann Jan, Sharma Rahul (2020-05)
      Additive Manufacturing of Reinforced Concrete:
      Development of a 3D Printing Technology for Cementitious Composites with Metallic Reinforcement
2443. Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
      A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete
2444. Reiter Lex, Wangler Timothy, Anton Ana-Maria, Flatt Robert (2020-05)
      Setting-on-Demand for Digital Concrete:
      Principles, Measurements, Chemistry, Validation
2445. Assaad Joseph, Yassin Abdallah, Sakka Fatima, Hamzeh Farook (2020-05)
      A Modular Approach for Steel Reinforcing of 3D Printed Concrete:
      Preliminary Study
2446. Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
      Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing
2447. Assaad Joseph, Hamzeh Farook, Hamad Bilal (2020-05)
      Qualitative Assessment of Interfacial Bonding in 3D Printing Concrete Exposed to Frost-Attack
2448. He Yawen, Zhang Yamei, Zhang Chao, Zhou Hongyu (2020-05)
      Energy-Saving-Potential of 3D Printed Concrete Building with Integrated Living Wall
2449. Cohen Zach, Carlson Nicholas (2020-05)
      Piling and Pressing:
      Towards a Method of 3D Printing Reinforced Concrete Columns
2450. Cicione Antonio, Kruger Jacques, Walls Richard, Zijl Gideon (2020-05)
      An Experimental Study of the Behavior of 3D Printed Concrete at Elevated Temperatures
2451. Baz Bilal, Aouad Georges, Leblond Philippe, Mansouri Omar et al. (2020-05)
      Mechanical Assessment of Concrete:
      Steel Bonding in 3D Printed Elements
2452. Ducoulombier Nicolas, Demont Léo, Chateau Camille, Bornert Michel et al. (2020-04)
      Additive Manufacturing of Anisotropic Concrete:
      A Flow-Based Pultrusion of Continuous Fibers in a Cementitious Matrix
2453. Khan Mohd (2020-04)
      Mix Suitable for Concrete 3D Printing:
      A Review
2454. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2020-04)
      A Rheology-Based Quasi-Static Shape-Retention-Model for Digitally Fabricated Concrete
2455. Falliano Devid, Domenico Dario, Ricciardi Giuseppe, Gugliandolo Ernesto (2020-04)
      3D Printable Lightweight Foamed Concrete and Comparison with Classical Foamed Concrete in Terms of Fresh State Properties and Mechanical Strength
2456. Carneau Paul, Mesnil Romain, Roussel Nicolas, Baverel Olivier (2020-04)
      Additive Manufacturing of Cantilever:
      From Masonry to Concrete 3D Printing
2457. Khan Mohammad, Sanchez Florence, Zhou Hongyu (2020-04)
      3D Printing of Concrete:
      Beyond Horizons
2458. Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
      Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete
2459. Burger Joris, Lloret-Fritschi Ena, Scotto Fabio, Demoulin Thibault et al. (2020-04)
      Eggshell:
      Ultra-Thin Three-Dimensional Printed Formwork for Concrete Structures
2460. Hoffmann Marcin, Skibicki Szymon, Pankratow Paweł, Zieliński Adam et al. (2020-04)
      Automation in the Construction of a 3D Printed Concrete Wall with the Use of a Lintel Gripper
2461. Damme Henri (2020-04)
      Challenges and Opportunities for Concrete in the Digital Era
2462. Gaudillière-Jami Nadja, Dirrenberger Justin, Duballet Romain, Bouyssou Charles et al. (2020-04)
      Industrialising Concrete 3D Printing
2463. Pham Luong, Tran Jonathan, Sanjayan Jay (2020-04)
      Steel-Fiber-Reinforced 3D Printed Concrete:
      Influence of Fiber Sizes on Mechanical Performance
2464. Hack Norman, Dörfler Kathrin, Walzer Alexander, Wangler Timothy et al. (2020-03)
      Structural Stay-in-Place Formwork for Robotic In-Situ Fabrication of Non-Standard Concrete Structures:
      A Real-Scale Architectural Demonstrator
2465. Ivanova Irina, Mechtcherine Viktor (2020-03)
      Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield-Stress and Structural Build-Up of Fresh Concrete
2466. Perrot Arnaud, Jacquet Yohan, Rangeard Damien, Courteille Eric et al. (2020-03)
      Nailing of Layers:
      A Promising Way to Reinforce Concrete 3D Printing Structures
2467. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
      Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
2468. Özalp Fatih, Yılmaz Halit (2020-03)
      Fresh and Hardened Properties of 3D High-Strength Printing Concrete and Its Recent Applications
2469. Manikandan Karthick, Wi Kwangwoo, Zhang Xiao, Wang Kejin et al. (2020-03)
      Characterizing Cement Mixtures for Concrete 3D Printing
2470. Otto Jens, Kortmann Jan, Krause Martin (2020-03)
      Cost Calculation of Concrete 3D Printing
2471. Park Keunhyoung, Memari Ali, Hojati Maryam, Zahabi Mehrzad et al. (2020-03)
      Experimental Testing and Finite Element Modeling of 3D Printed Reinforced Concrete Beams
2472. Haustein Martin, Kluwe Moritz, Schwarze Rüdiger (2020-03)
      Experimental Investigation of the Pumping of a Model-Concrete Through Pipes
2473. Jo Jun, Jo Byung, Cho Woohyun, Kim Jung-Hoon (2020-03)
      Development of a 3D Printer for Concrete Structures:
      Laboratory Testing of Cementitious Materials
2474. Hack Norman, Mai (née Dressler) Inka, Brohmann Leon, Gantner Stefan et al. (2020-03)
      Injection 3D Concrete Printing (I3DCP):
      Basic Principles and Case Studies
2475. Rahul Attupurathu, Santhanam Manu (2020-02)
      Evaluating the Printability of Concretes Containing Lightweight Coarse Aggregates
2476. Wang Li, Tian Zehao, Ma Guowei, Zhang Mo (2020-02)
      Inter-Layer Bonding Improvement of 3D Printed Concrete with Polymer-Modified Mortar:
      Experiments and Molecular Dynamics Studies
2477. Khalil Abdullah, Wang Xiangyu, Celik Kemal (2020-02)
      3D Printable Magnesium Oxide Concrete:
      Towards Sustainable Modern Architecture
2478. Craveiro Flávio, Nazarian Shadi, Bártolo Helena, Bartolo Paulo et al. (2020-02)
      An Automated System for 3D Printing Functionally Graded Concrete-Based Materials
2479. Casagrande Lorenzo, Esposito Laura, Menna Costantino, Asprone Domenico et al. (2020-02)
      Effect of Testing Procedures on Buildability Properties of 3D Printable Concrete
2480. Wang Li, Jiang Hailong, Li Zhijian, Ma Guowei (2020-02)
      Mechanical Behaviors of 3D Printed Lightweight Concrete Structure with Hollow Section
2481. Torelli Giacomo, Fernández Mar, Lees Janet (2020-02)
      Functionally Graded Concrete:
      Design Objectives, Production Techniques and Analysis Methods for Layered and Continuously Graded Elements
2482. Heinlein Ulli, Fraundorfer Andreas, Katona Sebastian, Wimmer Matthias (2020-02)
      Manufacturing of Curved Load-Bearing Concrete Elements Using an Adaptive Formwork Tool
2483. Ahmed Zeeshan, Bos Freek, Brunschot Maikel, Salet Theo (2020-02)
      On-Demand Additive Manufacturing of Functionally Graded Concrete
2484. Lao Wenxin, Li Mingyang, Wong Teck, Tan Ming et al. (2020-02)
      Improving Surface-Finish-Quality in Extrusion-Based 3D Concrete Printing Using Machine-Learning-Based Extrudate-Geometry-Control
2485. Vantyghem Gieljan, Corte Wouter, Shakour Emad, Amir Oded (2020-01)
      3D Printing of a Post-Tensioned Concrete Girder Designed by Topology-Optimization
2486. Gopani Aagam, Shah Parshva, Shah R. (2020-01)
      Developing and Analyzing Mix-Design for 3D Printable Concrete
2487. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-01)
      The Effect of Accelerator Dosage on Fresh Concrete Properties and on Inter-Layer Strength in Shotcrete 3D Printing
2488. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2020-01)
      Yield-Stress-Criteria to Assess the Buildability of 3D Concrete Printing
2489. Bos Freek, Ahmed Zeeshan, Rodríguez Claudia, Figueiredo Stefan (2019-12)
      3D Concrete Printing for Structural Applications
2490. Siddika Ayesha, Mamun Md., Ferdous Wahid, Saha Ashish et al. (2019-12)
      3D Printed Concrete:
      Applications, Performance, and Challenges
2491. Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2019-12)
      Comparison of Rheology Measurement Techniques Used in 3D Concrete Printing Applications
2492. Nishijo Keisuke, Ohno Motohiro, Ishida Tetsuya (2019-12)
      Quantitative Evaluation of Buildability in 3D Concrete Printing Based on Shear-Vane-Test
2493. Pham Luong, Lin Xiaoshan, Gravina R., Tran Jonathan (2019-12)
      Influence of PVA- and PP-Fibers at Different Volume Fractions on Mechanical Properties of 3D Printed Concrete
2494. Yassin Abdallah, Hamzeh Farook, Sakka Fatima (2019-12)
      Agent-Based Modeling to Optimize Workflow of Robotic Steel and Concrete 3D Printers
2495. Kruger Jacques, Cho Seung, Zeranka Stephan, Vintila Cristian et al. (2019-12)
      3D Concrete Printer Parameter Optimization for High-Rate Digital Construction Avoiding Plastic Collapse
2496. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
      New Carbon Fiber Reinforcement for Digital, Automated Concrete Construction
2497. Gradeci Klodian, Labonnote Nathalie (2019-11)
      On the Potential of Integrating Building Information Modelling for the Additive Manufacturing of Concrete Structures
2498. Kloft Harald, Hack Norman, Mainka Jeldrik, Brohmann Leon et al. (2019-11)
      Additive Manufacturing in Construction:
      First 3D-Printed Reinforced Concrete Components Using Shotcrete 3D Printing (SC3DP) Technology
2499. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
      Mineral-Impregnated Carbon-Fiber Composites as Novel Reinforcement for Concrete Construction:
      Material and Automation Perspectives
2500. Nerella Venkatesh, Krause Martin, Mechtcherine Viktor (2019-11)
      Direct Printing-Test for Buildability of 3D Printable Concrete Considering Economic Viability
2501. Marczyk Joanna, Ziejewska Celina, Łach Michał, Korniejenko Kinga et al. (2019-11)
      Possibilities of Using the 3D Printing Process in the Concrete and Geopolymers Application
2502. Markin Slava, Šahmenko Genādijs, Nerella Venkatesh, Näther Mathias et al. (2019-11)
      Investigations on the Foam-Concrete Production Techniques Suitable for 3D Printing with Foam-Concrete
2503. Marchment Taylor, Sanjayan Jay (2019-10)
      Mesh Reinforcing Method for 3D Concrete Printing
2504. Lim Jian, Weng Yiwei, Pham Quang-Cuong (2019-10)
      3D Printing of Curved Concrete Surfaces Using Adaptable Membrane Formwork
2505. Jipa Mihail-Andrei, Calvo Barentin Cristian, Lydon Gearóid, Rippmann Matthias et al. (2019-10)
      3D Printed Formwork for Integrated Funicular Concrete Slabs
2506. Falliano Devid, Sciarrone Antonino, Domenico Dario, Maugeri Natale et al. (2019-10)
      Fiber-Reinforced Lightweight Foamed Concrete Panels Suitable for 3D Printing Applications
2507. Vasilić Ksenija (2019-09)
      Additive Manufacturing in Concrete Construction:
      Current Status
2508. Taha Nizar, Walzer Alexander, Ruangjun Jetana, Bürgin Theophil et al. (2019-09)
      Robotic AeroCrete:
      A Novel Robotic Spraying and Surface Treatment Technology for the Production of Slender Reinforced Concrete Elements
2509. Arunothayan Arun, Nematollahi Behzad, Bong Shin, Ranade Ravi et al. (2019-09)
      Hardened Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction Applications
2510. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2019-09)
      Predication of Strength-Based Failure in Extrusion-Based 3D Concrete Printing
2511. Panda Biranchi, Mohamed Nisar, Tan Ming (2019-09)
      Rheology and Structural Rebuilding of One-Part Geopolymer Mortar in the Context of 3D Concrete Printing
2512. Matthäus Carla, Weger Daniel, Kränkel Thomas, Carvalho Luis et al. (2019-09)
      Extrusion of Lightweight Concrete:
      Rheological Investigations
2513. Shah Surendra, Kim Jae (2019-09)
      Rheology of Fresh Concrete:
      Historical Perspective and Glance in the Future
2514. Wangler Timothy, Scotto Fabio, Lloret-Fritschi Ena, Flatt Robert (2019-09)
      Residence-Time-Distributions in Continuous Processing of Concrete
2515. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-09)
      Quantifying Constructability Performance of 3D Concrete Printing via Rheology-Based Analytical Models
2516. Cho Seung, Kruger Jacques, Rooyen Algurnon, Zeranka Stephan et al. (2019-09)
      Rheology of 3D Printable Lightweight Foam-Concrete Incorporating Nano-Silica
2517. Das Arnesh, Reiter Lex, Wangler Timothy, Flatt Robert (2019-09)
      Hydration-Control of Ternary Cements for Digital Fabrication with Concrete
2518. Sanguinetti Paola, Almazam Khaled, Humaidan Omar, Colistra Joe et al. (2019-09)
      Evaluating the Potential of High-Performance Concrete 3D Printed Affordable Zero Energy Homes
2519. Jendele Libor, Červenka Jan, Vaitová Michaela (2019-09)
      FEM Modelling of Digitally Printed Concrete Structures Using 3D-Extrusion
2520. Valente Marco, Sibai Abbas, Sambucci Matteo (2019-09)
      Extrusion-Based Additive Manufacturing of Concrete Products:
      Revolutionizing and Remodeling the Construction Industry
2521. Zhang Chao, Hou Zeyu, Chen Chun, Zhang Yamei et al. (2019-09)
      Design of 3D Printable Concrete Based on the Relationship Between Flowability of Cement-Paste and Optimum Aggregate-Content
2522. Mechtcherine Viktor, Nerella Venkatesh, Will Frank, Näther Mathias et al. (2019-08)
      Large-Scale Digital Concrete Construction:
      CONPrint3D Concept for On-Site, Monolithic 3D Printing
2523. Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2019-08)
      Mechanical Characterization of 3D Printable Concrete
2524. Watson Nathan, Meisel Nicholas, Bilén Sven, Duarte José et al. (2019-08)
      Large-Scale Additive Manufacturing of Concrete Using a Six-Axis Robotic Arm for Autonomous Habitat Construction
2525. Yao Yue, Hu Mingming, Maio Francesco, Cucurachi Stefano (2019-08)
      Life Cycle Assessment of 3D Printing Geopolymer Concrete:
      An Ex‐Ante Study
2526. Kim Kwan, Yeon Jaeheum, Lee Hee (2019-08)
      Strength Development Characteristics of SBR-Modified Cementitious Mixtures for 3D Concrete Printing
2527. Markin Slava, Nerella Venkatesh, Schröfl Christof, Guseynova Gyunay et al. (2019-07)
      Material-Design and Performance-Evaluation of Foam-Concrete for Digital Fabrication
2528. Silva Wilson, Fryda Hervé, Bousseau Jean-Noël, Andreani Pierre-Antoine et al. (2019-07)
      Evaluation of Early-Age Concrete Structural Build-Up for 3D Concrete Printing by Oscillatory Rheometry
2529. Zhang Jingchuan, Wang Jialiang, Dong Sufen, Yu Xun et al. (2019-07)
      A Review of the Current Progress and Application of 3D Printed Concrete
2530. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
      An Ab-Inito Approach for Thixotropy Characterisation of Nano-Particle-Infused 3D Printable Concrete
2531. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
      3D Concrete Printing:
      A Lower-Bound Analytical Model for Buildability-Performance-Quantification
2532. Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
      The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete
2533. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2019-06)
      Processing of Cementitious Materials for 3D Concrete Printing
2534. Ducoulombier Nicolas (2019-06)
      Characterisation and Modelling of Interfacial-Damage in Fiber-Reinforced Concrete for 3D Printing in Construction
2535. Cho Seung, Kruger Jacques, Zeranka Stephan, Rooyen Algurnon et al. (2019-06)
      Mechanical Evaluation of 3D Printable Nano-Silica Incorporated Fiber-Reinforced Lightweight Foam-Concrete
2536. Jipa Mihail-Andrei, Giacomarra Federico, Giesecke Rena, Chousou Georgia et al. (2019-06)
      3D Printed Formwork for Bespoke Concrete Stairs
2537. Hirayama Yuta, Zhang Jiali, Kawahara Yoshihiro (2019-06)
      A Method to Evaluate the Formability and Fluidity of Concrete-Based Materials for 3D Printing
2538. Moreira Jr. Amarildo, Santos Francielle (2019-06)
      Automatization of the Constructive Process:
      A Systematic Study of the 3D Concrete Printing Technology (Contour Crafting)
2539. Wangler Timothy, Roussel Nicolas, Bos Freek, Salet Theo et al. (2019-06)
      Digital Concrete:
      A Review
2540. Wolfs Robert, Bos Freek, Salet Theo (2019-06)
      Triaxial Compression Testing on Early-Age Concrete for Numerical Analysis of 3D Concrete Printing
2541. Tay Yi, Qian Ye, Tan Ming (2019-05)
      Printability-Region for 3D Concrete Printing Using Slump- and Slump-Flow-Test
2542. Ji Guangchao, Ding Tao, Xiao Jianzhuang, Du Shupeng et al. (2019-05)
      A 3D Printed Ready-Mixed Concrete Power-Distribution Substation:
      Materials and Construction Technology
2543. Valle‐Pello P., Álvarez‐Rabanal Felipe, Alonso‐Martínez M., Coz Díaz J. (2019-05)
      Numerical Study of the Interfaces of 3D Printed Concrete Using Discrete Element Method
2544. Liu Gaojie, Bai Erlei, Xu Jinyu, Wang Tengjiao et al. (2019-05)
      Research Status and Development Prospect of 3D Printing Concrete Materials
2545. Krause Martin, Otto Jens (2019-05)
      Digital Process Model for Concrete 3D Printing
2546. Perrot Arnaud, Amziane Sofiane (2019-04)
      3D Printing in Concrete:
      General Considerations and Technologies
2547. Perrot Arnaud, Rangeard Damien (2019-04)
      3D Printing in Concrete:
      Techniques for Extrusion-Casting
2548. Perrot Arnaud, Rangeard Damien (2019-04)
      3D Printing with Concrete:
      Impact and Designs of Structures
2549. Chen Yu, Li Zhenming, Figueiredo Stefan, Çopuroğlu Oğuzhan et al. (2019-04)
      Limestone and Calcined-Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing:
      A Fundamental Study of Extrudability and Early-Age Strength Development
2550. Chen Yu, Figueiredo Stefan, Yalçınkaya Çağlar, Çopuroğlu Oğuzhan et al. (2019-04)
      The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined-Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
2551. Lauff Philipp, Fischer Oliver (2019-04)
      Efficient Ultra-High Performance Concrete with Innovative Trajectory-Oriented "Reinforcement"
2552. Xu Jie, Ding Lieyun, Cai Lixiong, Zhang Lichao et al. (2019-04)
      Volume-Forming 3D Concrete Printing Using a Variable-Size Square Nozzle
2553. Diggs-McGee Brandy, Kreiger Eric, Kreiger Megan, Case Michael (2019-04)
      Print Time vs. Elapsed Time:
      A Temporal Analysis of a Continuous Printing Operation for Additive Constructed Concrete
2554. Geneidy Omar, Ismaeel Walaa, Abbas Ayman (2019-04)
      A Critical Review for Applying Three-Dimensional Concrete Wall Printing Technology in Egypt
2555. Kreiger Eric, Kreiger Megan, Case Michael (2019-04)
      Development of the Construction Processes for Reinforced Additively Constructed Concrete
2556. Tay Yi, Li Mingyang, Tan Ming (2019-04)
      Effect of Printing Parameters in 3D Concrete Printing:
      Printing Region and Support Structures
2557. Furet Benoît, Poullain Philippe, Garnier Sébastien (2019-04)
      3D Printing for Construction Based on a Complex Wall of Polymer-Foam and Concrete
2558. Ting Guan, Tay Yi, Qian Ye, Tan Ming (2019-03)
      Utilization of Recycled Glass for 3D Concrete Printing:
      Rheological and Mechanical Properties
2559. Hosseini Ehsan, Zakertabrizi Mohammad, Korayem Asghar, Xu Guanzhong (2019-03)
      A Novel Method to Enhance the Inter-Layer Bonding of 3D Printing Concrete:
      An Experimental and Computational Investigation
2560. Wolfs Robert, Bos Freek, Salet Theo (2019-03)
      Hardened Properties of 3D Printed Concrete:
      The Influence of Process Parameters on Inter-Layer Adhesion
2561. Gaudillière-Jami Nadja, Duballet Romain, Bouyssou Charles, Mallet Alban et al. (2019-02)
      Building Applications Using Lost Formworks Obtained Through Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete
2562. Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2019-02)
      Performance-Based Testing of Portland Cement Concrete for Construction-Scale 3D Printing
2563. Avrutis Daniel, Nazari Ali, Sanjayan Jay (2019-02)
      Industrial Adoption of 3D Concrete Printing in the Australian Market
2564. Nerella Venkatesh, Mechtcherine Viktor (2019-02)
      Studying the Printability of Fresh Concrete for Formwork-Free Concrete Onsite 3D Printing Technology (CONPrint3D)
2565. Rushing Todd, Stynoski Peter, Barna Lynette, Chaar Ghassan et al. (2019-02)
      Investigation of Concrete Mixtures for Additive Construction
2566. Sanjayan Jay, Nematollahi Behzad (2019-02)
      3D Concrete Printing for Construction Applications
2567. Malaeb Zeina, Sakka Fatima, Hamzeh Farook (2019-02)
      3D Concrete Printing:
      Machine Design, Mix Proportioning, and Mix Comparison Between Different Machine Setups
2568. Marchment Taylor, Sanjayan Jay, Nematollahi Behzad, Xia Ming (2019-02)
      Inter-Layer Strength of 3D Printed Concrete
2569. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
      Development of Powder-Based 3D Concrete Printing Using Geopolymers
2570. Jeong Hoseong, Han Sun-Jin, Choi Seung-Ho, Lee Yoon et al. (2019-02)
      Rheological Property Criteria for Buildable 3D Printing Concrete
2571. Panda Biranchi, Bhagath Singh Gangapatnam, Unluer Cise, Tan Ming (2019-02)
      Synthesis and Characterization of One-Part Geopolymers for Extrusion-Based 3D Concrete Printing
2572. Panda Biranchi, Lim Jian, Tan Ming (2019-02)
      Mechanical Properties and Deformation Behavior of Early-Age Concrete in the Context of Digital Construction
2573. Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
      Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing
2574. Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2019-01)
      Direct-Shear-Test for the Assessment of Rheological Parameters of Concrete for 3D Printing Applications
2575. Zhang Yu, Zhang Yunsheng, She Wei, Yang Lin et al. (2019-01)
      Rheological and Hardened Properties of the High-Thixotropy 3D Printing Concrete
2576. Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2018-12)
      3D Printable Concrete:
      Mixture-Design and Test-Methods
2577. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-12)
      Robotic Concrete Surface Finishing:
      A Moldless Approach to Creating Thermally Tuned Surface Geometry for Architectural Building Components Using Profile 3D Printing
2578. Chaar Ghassan, Stynoski Peter, Banko Marion (2018-11)
      Structural Behavior of Layer-Printed Reinforced Concrete Beams
2579. Heever Marchant, Bester Frederick (2018-11)
      3D Printing of Concrete within the South African Building and Construction Industry
2580. Wangler Timothy (2018-11)
      Digital Concrete Processing:
      A Review
2581. Jipa Mihail-Andrei, Meibodi Mania, Giesecke Rena, Shammas Demetris et al. (2018-11)
      3D Printed Formwork for Prefabricated Concrete Slabs
2582. Bos Freek, Bosco Emanuela, Salet Theo (2018-11)
      Ductility of 3D Printed Concrete Reinforced with Short Straight Steel-Fibers
2583. Mechtcherine Viktor, Nerella Venkatesh (2018-10)
      3D-Concrete-Printing by Selective Deposition:
      Requirements for Fresh Concrete and Testing
2584. Meibodi Mania, Jipa Mihail-Andrei, Giesecke Rena, Shammas Demetris et al. (2018-10)
      Smart Slab:
      Computational Design and Digital Fabrication of a Lightweight Concrete Slab
2585. Zivkovic Sasa, Battaglia Christopher (2018-10)
      Rough-Pass-Extrusion-Tooling:
      CNC Post-Processing of 3D Printed Sub-Additive Concrete Lattice-Structures
2586. Ashrafi Negar, Duarte José, Nazarian Shadi, Meisel Nicholas (2018-10)
      Evaluating the Relationship Between Deposition and Layer-Quality in Large-Scale Additive Manufacturing of Concrete
2587. Reinold Janis, Meschke Günther (2018-10)
      Particle-Finite-Element-Simulation of Fresh Concrete for 3D Printing Applications
2588. Papachristoforou Michail, Mitsopoulos Vasilios, Stefanidou Maria (2018-10)
      Evaluation of Workability Parameters in 3D Printing Concrete
2589. Schutter Geert, Lesage Karel (2018-09)
      Active Control of Properties of Concrete:
      A (P)Review
2590. Gaudillière-Jami Nadja, Duballet Romain, Bouyssou Charles, Mallet Alban et al. (2018-09)
      Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete of Integrated Formwork for Truss-Shaped Pillars
2591. Battaglia Christopher, Miller Martin, Zivkovic Sasa (2018-09)
      Sub-Additive 3D Printing of Optimized Double Curved Concrete Lattice Structures
2592. Bhooshan Shajay, Ladinig Johannes, Mele Tom, Block Philippe (2018-09)
      Function Representation for Robotic 3D Printed Concrete
2593. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-09)
      Thermally Informed Robotic Topologies:
      Profile 3D Printing for the Robotic Construction of Concrete Panels, Thermally Tuned Through High-Resolution Surface Geometry
2594. Chee Ryan, Tan Wei, Goh Wei, Amtsberg Felix et al. (2018-09)
      Concrete Fabrication by Digitally Controlled Injection
2595. Søndergaard Asbjørn, Feringa Jelle, Stan Florin, Maier Dana (2018-09)
      Realization of Topology Optimized Concrete Structures Using Robotic Abrasive Wire-Cutting of Expanded Polystyrene Formwork
2596. Ayres Phil, Silva Wilson, Nicholas Paul, Andersen Thomas et al. (2018-09)
      SCRIM:
      Sparse Concrete Reinforcement in Meshworks
2597. Falliano Devid, Gugliandolo Ernesto, Domenico Dario, Ricciardi Giuseppe (2018-09)
      Experimental Investigation on the Mechanical Strength and Thermal Conductivity of Extrudable Foamed Concrete and Preliminary Views on Its Potential Application in 3D Printed Multilayer Insulating Panels
2598. Marchment Taylor, Sanjayan Jay (2018-09)
      Method of Enhancing Inter-Layer Bond Strength in 3D Concrete Printing
2599. Ma Siwei, Kawashima Shiho (2018-09)
      Rheological and Water Transport Properties of Cement-Pastes Modified with Diutan Gum and Attapulgite-Palygorskite-Nano-Clay for 3D Concrete Printing
2600. Lindemann Hendrik, Gerbers Roman, Ibrahim Serhat, Dietrich Franz et al. (2018-09)
      Development of a Shotcrete 3D Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures
2601. Martins Pedro, Campos Paulo, Nunes Sandra, Sousa José (2018-09)
      The Tectonics of Digitally Fabricated Concrete:
      A Case for Robotic Hot Wire-Cutting
2602. Mechtcherine Viktor, Nerella Venkatesh, Ogura Hiroki, Grafe Jasmin et al. (2018-09)
      Alternative Reinforcements for Digital Concrete Construction
2603. Schröfl Christof, Nerella Venkatesh, Mechtcherine Viktor (2018-09)
      Capillary Water Intake by 3D Printed Concrete Visualised and Quantified by Neutron Radiography
2604. Stefanoni Matteo, Angst Ueli, Elsener Bernhard (2018-09)
      Corrosion Challenges and Opportunities in Digital Fabrication of Reinforced Concrete
2605. Vandenberg Aileen, Bessaies-Bey Hela, Wille Kay, Roussel Nicolas (2018-09)
      Enhancing Printable Concrete Thixotropy by High-Shear Mixing
2606. Craipeau Typhanie, Lecompte Thibault, Toussaint Fabrice, Perrot Arnaud (2018-09)
      Evolution of Concrete-Formwork Interface in Slipforming Process
2607. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2018-09)
      Large-Scale Testing of Digitally Fabricated Concrete (DFC) Elements
2608. Wangler Timothy, Flatt Robert (2018-09)
      Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication:
      Correction
2609. Mata-Falcón Jaime, Bischof Patrick, Kaufmann Walter (2018-09)
      Exploiting the Potential of Digital Fabrication for Sustainable and Economic Concrete Structures
2610. Chen Yu, Veer Frederic, Çopuroğlu Oğuzhan, Schlangen Erik (2018-09)
      Feasibility of Using Low CO2 Concrete Alternatives in Extrusion-Based 3D Concrete Printing
2611. Vantyghem Gieljan, Boel Veerle, Corte Wouter, Steeman Marijke (2018-09)
      Compliance, Stress-Based and Multi-Physics Topology-Optimization for 3D Printed Concrete Structures
2612. Lowke Dirk (2018-09)
      Concrete, the Predestined Building Material for Additive Manufacturing
2613. Schutter Geert, Lesage Karel, Mechtcherine Viktor, Nerella Venkatesh et al. (2018-08)
      Vision of 3D Printing with Concrete:
      Technical, Economic and Environmental Potentials
2614. Flatt Robert, Wangler Timothy (2018-08)
      Editorial for Special Issue on Digital Concrete
2615. Lowke Dirk, Dini Enrico, Perrot Arnaud, Weger Daniel et al. (2018-07)
      Particle-Bed 3D Printing in Concrete Construction:
      Possibilities and Challenges
2616. Borg Costanzi Christopher, Ahmed Zeeshan, Schipper Roel, Bos Freek et al. (2018-07)
      3D Printing Concrete on Temporary Surfaces:
      The Design and Fabrication of a Concrete Shell Structure
2617. Schwartz Joseph (2018-07)
      Graphic Statics and Their Potential for Digital Design and Fabrication with Concrete
2618. Herrmann Eric, Mainka Jeldrik, Lindemann Hendrik, Wirth Franz et al. (2018-07)
      Digitally Fabricated Innovative Concrete Structures
2619. Tay Yi, Ting Guan, Qian Ye, Panda Biranchi et al. (2018-07)
      Time-Gap-Effect on Bond Strength of 3D Printed Concrete
2620. Nerella Venkatesh, Ogura Hiroki, Mechtcherine Viktor (2018-07)
      Incorporating Reinforcement into Digital Concrete Construction
2621. Silva Wilson, Andersen Thomas, Kudsk Anders, Jørgensen Kåre (2018-07)
      3D Concrete Printing of Post-Tensioned Elements
2622. Al-Qutaifi Sarah, Nazari Ali, Bagheri Ali (2018-07)
      Mechanical Properties of Layered Geopolymer Structures Applicable in Concrete 3D Printing
2623. Xu Jie, Ding Lieyun (2018-07)
      Volume-Forming 3D Concrete Printing Using a Variable-Diameter Square Nozzle
2624. Buswell Richard, Silva Wilson, Jones Scott, Dirrenberger Justin (2018-06)
      3D Printing Using Concrete-Extrusion:
      A Roadmap for Research
2625. Wolfs Robert, Bos Freek, Salet Theo (2018-06)
      Correlation Between Destructive Compression Tests and Non-Destructive Ultrasonic Measurements on Early-Age 3D Printed Concrete
2626. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2018-06)
      The Role of Early-Age Structural Build-Up in Digital Fabrication with Concrete
2627. Asprone Domenico, Menna Costantino, Bos Freek, Salet Theo et al. (2018-06)
      Rethinking Reinforcement for Digital Fabrication with Concrete
2628. Salet Theo, Ahmed Zeeshan, Bos Freek, Laagland Hans (2018-05)
      Design of a 3D Printed Concrete Bridge by Testing
2629. Panda Biranchi, Tay Yi, Paul Suvash, Tan Ming (2018-05)
      Current Challenges and Future Potential of 3D Concrete Printing
2630. Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
      3D Printed Steel-Reinforcement for Digital Concrete Construction:
      Manufacture, Mechanical Properties and Bond Behavior
2631. Marchon Delphine, Kawashima Shiho, Bessaies-Bey Hela, Mantellato Sara et al. (2018-05)
      Hydration- and Rheology-Control of Concrete for Digital Fabrication:
      Potential Admixtures and Cement-Chemistry
2632. Chee Ryan, Tan Wei, Goh Wei, Amtsberg Felix et al. (2018-05)
      Locally Differentiated Concrete by Digitally Controlled Injection
2633. Lao Wenxin, Tay Yi, Quirin Didier, Tan Ming (2018-05)
      The Effect of Nozzle Shapes on the Compactness and Strength of Structure Printed in Additive Manufacturing of Concrete
2634. Tay Yi, Ting Guan, Panda Biranchi, He Lewei et al. (2018-05)
      Bond Strength of 3D Printed Concrete
2635. Salet Theo, Ahmed Zeeshan, Bos Freek (2018-05)
      3D Printed Concrete Bridge
2636. Paul Suvash, Zijl Gideon, Tan Ming, Gibson Ian (2018-05)
      A Review of 3D Concrete Printing Systems and Materials Properties:
      Current Status and Future Research Prospects
2637. Zareiyan Babak, Khoshnevis Behrokh (2018-05)
      Effects of Mixture Ingredients on Extrudability of Concrete in Contour Crafting
2638. Roussel Nicolas (2018-05)
      Rheological Requirements for Printable Concretes
2639. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum (2018-05)
      Feasibility Study of the Use of Polymer-Modified Cement Composites as 3D Concrete Printing-Material
2640. Mechtcherine Viktor, Nerella Venkatesh (2018-04)
      Incorporating Reinforcement in 3D-Printing with Concrete
2641. Burroughs Jedadiah, Johnson Carol, Chaar Ghassan, Banko Marion et al. (2018-04)
      Automated Construction with Concrete:
      Response of Wall- and Beam-Sections to Blast-Loads
2642. Hojati Maryam, Nazarian Shadi, Duarte José, Radlińska Aleksandra et al. (2018-04)
      3D Printing of Concrete:
      A Continuous Exploration of Mix-Design and Printing-Process
2643. Zhang Yu, Zhang Yunsheng, Liu Guojian, Yang Yonggan et al. (2018-04)
      Fresh Properties of a Novel 3D Printing Concrete Ink
2644. Zareiyan Babak, Khoshnevis Behrokh (2018-04)
      _Effects of Mixture Ingredients on Inter-Layer Adhesion of Concrete in Contour Crafting
2645. Secrieru Egor, Cotardo Dario, Mechtcherine Viktor, Lohaus Ludger et al. (2018-04)
      Changes in Concrete Properties During Pumping and Formation of Lubricating Material Under Pressure
2646. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2018-04)
      Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete
2647. Tian Wei, Han Nv (2018-04)
      Pore Characteristics (>0.1mm) Of Non-Air-Entrained Concrete Destroyed by Freeze-Thaw-Cycles Based on CT Scanning and 3D Printing
2648. Nerella Venkatesh, Mechtcherine Viktor (2018-03)
      Virtual Sliding-Pipe Rheometer for Estimating Pumpability of Concrete
2649. Asprone Domenico, Auricchio Ferdinando, Menna Costantino, Mercuri Valentina (2018-03)
      3D Printing of Reinforced Concrete Elements:
      Technology and Design Approach
2650. Vaitkevičius Vitoldas, Šerelis Evaldas, Kerševičius Vidas (2018-03)
      Effect of Ultra-Sonic Activation on Early Hydration Process in 3D Concrete Printing Technology
2651. Son Seunghyun, Lim Jeeyoung, Kim Sunkuk (2018-03)
      Planning Algorithms for In-Situ Production of Free-Form Concrete Panels
2652. Panda Biranchi, Tan Ming (2018-03)
      Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing
2653. Yuan Yong, Tao Yaxin (2018-03)
      Mixing and Extrusion of Printing Concrete
2654. Ibrahim Serhat, Olbrich Alexander, Lindemann Hendrik, Gerbers Roman et al. (2018-02)
      Automated Additive Manufacturing of Concrete Structures without Formwork:
      Concept for Path-Planning
2655. Mechtcherine Viktor, Nerella Venkatesh (2018-02)
      3D Printing with Concrete:
      State-of-the-Art, Trends, Challenges
2656. Wolfs Robert, Bos Freek, Salet Theo (2018-02)
      Early-Age Mechanical Behaviour of 3D Printed Concrete:
      Numerical Modelling and Experimental Testing
2657. Tomé Ana, Vizotto Isaías, Valença Jónatas, Júlio Eduardo (2018-02)
      Innovative Method for Automatic Shape-Generation and 3D Printing of Reduced-Scale Models of Ultra-Thin Concrete Shells
2658. Chen Yu, Çopuroğlu Oğuzhan, Veer Frederic (2018-01)
      A Critical Review of 3D Concrete Printing as a Low-CO2 Concrete Approach
2659. Schipper Roel, Borg Costanzi Christopher, Bos Freek, Ahmed Zeeshan et al. (2017-12)
      Double Curved Concrete Printing:
      Printing on Non-Planar Surfaces
2660. Coenders Jeroen, Mathot Maarten, Martens Pascal, Bos Freek et al. (2017-12)
      Optimizing 3D Concrete Printing:
      Exploring Potentials and Limitations of Materials and Production
2661. Bos Freek, Ahmed Zeeshan, Jutinov Evgeniy, Salet Theo (2017-11)
      Experimental Exploration of Metal-Cable as Reinforcement in 3D Printed Concrete
2662. Jipa Mihail-Andrei, Bernhard Mathias, Dillenburger Benjamin (2017-11)
      Submillimetre Formwork:
      3D Printed Plastic Formwork for Concrete Elements
2663. Richardson Victoria (2017-10)
      3D Printing Becomes Concrete:
      Exploring the Structural Potential of Concrete 3D Printing
2664. Marijnissen Marjolein, Zee Aant (2017-09)
      3D Concrete Printing in Architecture:
      A Research on the Potential Benefits of 3D Concrete Printing in Architecture
2665. Bhooshan Shajay, Mele Tom, Block Philippe (2017-09)
      Equilibrium-Aware Shape Design for Concrete Printing
2666. Duballet Romain, Baverel Olivier, Dirrenberger Justin (2017-09)
      Design of Space-Truss-Based Insulating Walls for Robotic Fabrication in Concrete
2667. Ma Guowei, Wang Li (2017-08)
      A Critical Review of Preparation Design and Workability Measurement of Concrete Material for Large-Scale 3D Printing
2668. Duballet Romain, Baverel Olivier, Dirrenberger Justin (2017-08)
      Classification of Building Systems for Concrete 3D Printing
2669. Zareiyan Babak, Khoshnevis Behrokh (2017-08)
      Effects of Interlocking on Inter-Layer Adhesion and Strength of Structures in 3D Printing of Concrete
2670. Sakka Fatima, Hamzeh Farook (2017-07)
      3D Concrete Printing in the Service of Lean Construction
2671. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2017-07)
      Current Progress of 3D Concrete Printing Technologies
2672. Marchment Taylor, Xia Ming, Dodd Elise, Sanjayan Jay et al. (2017-07)
      Effect of Delay-Time on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
2673. Shakor Pshtiwan, Renneberg Jarred, Nejadi Shami, Paul Gavin (2017-07)
      Optimization of Different Concrete Mix Designs for 3D Printing by Utilizing 6DOF Industrial Robot
2674. Panda Biranchi, Lim Jian, Mohamed Nisar, Paul Suvash et al. (2017-07)
      Automation of Robotic Concrete Printing Using Feedback-Control-System
2675. Kashani Alireza, Ngo Tuan (2017-07)
      Optimization of Mixture-Properties for 3D Printing of Geopolymer Concrete
2676. Bos Freek, Ahmed Zeeshan, Wolfs Robert, Salet Theo (2017-06)
      3D Printing Concrete with Reinforcement
2677. Martens Pascal, Mathot Maarten, Bos Freek, Coenders Jeroen (2017-06)
      Optimizing 3D Printed Concrete Structures Using Topology Optimization
2678. Wolfs Robert, Bos Freek, Strien Emiel, Salet Theo (2017-06)
      A Real-Time Height Measurement and Feedback System for 3D Concrete Printing
2679. Wolfswinkel Jan, Land Wim, Stuit Herke, Bastiaens Guido et al. (2017-06)
      Design Process of a 3D Printed Concrete Water Taxi Stop
2680. Salet Theo, Bos Freek, Wolfs Robert, Ahmed Zeeshan (2017-06)
      3D Concrete Printing:
      A Structural Engineering Perspective
2681. Kazemian Ali, Yuan Xiao, Meier Ryan, Cochran Evan et al. (2017-06)
      Construction-Scale 3D Printing:
      Shape Stability of Fresh Printing Concrete
2682. Kumar Nitish, Hack Norman, Dörfler Kathrin, Walzer Alexander et al. (2017-06)
      Design, Development and Experimental Assessment of a Robotic End-Effector for Non-Standard Concrete Applications
2683. Agustí-Juan Isolda, Müller Florian, Hack Norman, Wangler Timothy et al. (2017-04)
      Potential Benefits of Digital Fabrication for Complex Structures:
      Environmental Assessment of a Robotically Fabricated Concrete Wall
2684. Secrieru Egor, Fataei Shirin, Schröfl Christof, Mechtcherine Viktor (2017-04)
      Study on Concrete Pumpability Combining Different Laboratory Tools and Linkage to Rheology
2685. Liew A., López D., Mele Tom, Block Philippe (2017-02)
      Design, Fabrication and Testing of a Prototype, Thin-Vaulted, Unreinforced Concrete Floor
2686. Rushing Todd, Chaar Ghassan, Eick Brian, Burroughs Jedadiah et al. (2017-01)
      Investigation of Concrete Mixtures for Additive Construction
2687. Wörner Mark, Schmeer Daniel, Schuler Benjamin, Pfinder Julian et al. (2016-12)
      The Technology of Graded Concrete:
      From the Development of Concrete Mixtures and the Conceptual Design to the Automatized Manufacturing
2688. Schutter Geert, Feys Dimitri (2016-11)
      Pumping of Fresh Concrete:
      Insights and Challenges
2689. Ahmed Zeeshan, Bos Freek, Wolfs Robert, Salet Theo (2016-11)
      Design Considerations Due to Scale Effects in 3D Concrete Printing
2690. Jipa Mihail-Andrei, Bernhard Mathias, Meibodi Mania, Dillenburger Benjamin (2016-11)
      3D Printed Stay-in-Place Formwork for Topologically Optimized Concrete Slabs
2691. Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
      Digital Concrete:
      Opportunities and Challenges
2692. Khoshnevis Behrokh, Yuan Xiao, Zahiri Behnam, Zhang Jing et al. (2016-08)
      Construction by Contour Crafting Using Sulfur-Concrete with Planetary Applications
2693. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
      Additive Manufacturing of Concrete in Construction:
      Potentials and Challenges of 3D Concrete Printing
2694. Bohan Richard (2016-05)
      Adding Manufacturing Using Concrete:
      A Bridge Too Far?
2695. Neudecker Stefan, Bruns Christopher, Gerbers Roman, Heyn Jakob et al. (2016-05)
      A New Robotic Spray Technology for Generative Manufacturing of Complex Concrete-Structures without Formwork
2696. Jeong Jae, Jang Kyong, Park Chan, Lee Seung et al. (2016-05)
      Effect of Admixtures on Pumpability for High-Strength Concrete
2697. Fischer Thomas, Herr Christiane (2016-04)
      Parametric Customisation of a 3D Concrete Printed Pavilion
2698. Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
      Large-Scale 3D Printing of Ultra-High-Performance Concrete:
      A New Processing Route for Architects and Builders
2699. Duballet Romain, Gosselin Clément, Roux Philippe (2015-10)
      Additive Manufacturing and Multi-Objective Optimization of Graded Polystyrene-Aggregate Concrete Structures
2700. Morel Philippe, Schwartz Thibault (2015-10)
      Automated Casting Systems for Spatial Concrete Lattices
2701. Herrmann Michael, Sobek Werner (2015-10)
      Functionally Graded Concrete:
      Numerical Design Methods and Experimental Studies on Mass Minimized Components
2702. Khoshnevis Behrokh, Yuan Xiao, Zahiri Behnam, Zhang Jing et al. (2015-09)
      Deformation-Analysis of Sulfur-Concrete Structures Made by Contour Crafting
2703. Wolfs Robert, Salet Theo, Hendricks Berry (2015-08)
      3D Printing of Sustainable Concrete Structures
2704. Krause Martin, Otto Jens, Bulgakov Alexey, Sayfeddine Daher (2015-07)
      Strategic Optimization of 3D Concrete Printing Using the Method of CONPrint3D®
2705. Le H., Kadri Hadj, Aggoun Salima, Vierendeels Jan et al. (2015-01)
      Effect of Lubrication-Layer on Velocity-Profile of Concrete in a Pumping Pipe
2706. Michel Matthias, Knaack Ulrich (2014-12)
      Fundamentals of Development for Adaptive Formwork for Free Formed Concrete Shells and Walls
2707. Secrieru Egor, Butler Marko, Mechtcherine Viktor (2014-11)
      Testing Pumpability of Concrete:
      From Laboratory into Practice
2708. Martins Pedro, Sousa José (2014-09)
      Digital Fabrication Technology in Concrete Architecture
2709. Hack Norman, Lauer Willi (2014-04)
      Mesh Mould:
      Robotically Fabricated Spatial Meshes as Reinforced Concrete Formwork
2710. Mechtcherine Viktor, Gram Annika, Krenzer Knut, Schwabe Jörg-Henry et al. (2014-03)
      Simulation of Fresh Concrete Flow Using Discrete Element Method (DEM)
2711. Lloret-Fritschi Ena, Shahab Amir, Linus Mettler, Flatt Robert et al. (2014-03)
      Complex Concrete Structures:
      Merging Existing Casting Techniques with Digital Fabrication
2712. Mechtcherine Viktor, Nerella Venkatesh, Kasten Knut (2013-12)
      Testing Pumpability of Concrete Using Sliding-Pipe Rheometer
2713. Carlo Tony, Khoshnevis Behrokh, Chen Yong (2013-11)
      Manufacturing Additively, with Fresh Concrete
2714. Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias, Langenberg Silke (2013-05)
      Complex Concrete Constructions:
      Merging Existing Casting Techniques with Digital Fabrication
2715. Choi Myoungsung, Roussel Nicolas, Kim Youngjin, Kim Jinkeun (2013-01)
      Lubrication-Layer Properties During Concrete Pumping
2716. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
      Mix-Design and Fresh Properties for High-Performance Printing Concrete
2717. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
      Hardened Properties of High-Performance Printing Concrete
2718. Rael Ronald, Fratello Virginia (2011-10)
      Developing Concrete Polymer Building Components for 3D Printing
2719. Lim Sungwoo, Buswell Richard, Le Thanh, Wackrow Rene et al. (2011-07)
      Development of a Viable Concrete Printing Process
2720. Deng Shou-chang, Zhang Xue-bing, Qin Ying-hui, Luo Guan-xiang (2007-02)
      Rheological Characteristic of Cement Clean Paste and Flowing Behavior of Fresh Mixing Concrete with Pumping in Pipeline
2721. Hwang Dooil, Khoshnevis Behrokh (2004-09)
      Concrete Wall Fabrication by Contour Crafting