Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete (2022-02)¶
A Review
, , , Suraneni Prannoy,
Journal Article - Journal of Cleaner Production, Vol. 340
Abstract
This paper provides a comprehensive review of the utilization of industrial wastes in 3D concrete printing processes. Concrete 3D printing processes are introduced, highlighting the need for unique material requirements. The literature on the different wastes that have been used for producing 3D printable mixtures is reviewed, including waste generation, material properties, and the roles of these materials in improving the fresh properties needed for concrete printing. Factors affecting successful utilization of these waste materials in 3D printable concrete are discussed in addition to their environmental impacts. This paper underlines the positive impacts of using industrial wastes for improving the sustainability of 3D printable concrete. It is expected that printable concrete formulations containing high volumes of industrial waste (and chemical admixtures) can be developed to improve the sustainability index of this emerging construction technique.
¶
105 References
- Adaloudis Max, Bonnin Roca Jaime (2021-05)
Sustainability Tradeoffs in the Adoption of 3D Concrete Printing in the Construction Industry - Agustí-Juan Isolda, Habert Guillaume (2016-11)
Environmental Design Guidelines for Digital Fabrication - Alhumayani Hashem, Gomaa Mohamed, Soebarto Veronica, Jabi Wassim (2020-06)
Environmental Assessment of Large-Scale 3D Printing in Construction:
A Comparative Study between Cob and Concrete - Anton Ana-Maria, Reiter Lex, Wangler Timothy, Frangez Valens et al. (2020-12)
A 3D Concrete Printing Prefabrication Platform for Bespoke Columns - Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2020-10)
Development of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction - Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2021-02)
Fiber-Orientation Effects on Ultra-High-Performance Concrete Formed by 3D Printing - Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Khayat Kamal et al. (2021-10)
Digital Fabrication of Eco-Friendly Ultra-High-Performance Fiber-Reinforced Concrete - Bai Gang, Wang Li, Ma Guowei, Sanjayan Jay et al. (2021-03)
3D Printing Eco-Friendly Concrete Containing Under-Utilised and Waste Solids as Aggregates - Baz Bilal, Aouad Georges, Kleib Joelle, Bulteel David et al. (2021-04)
Durability-Assessment and Micro-Structural Analysis of 3D Printed Concrete Exposed to Sulfuric-Acid Environments - Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing - Cho Seung, Kruger Jacques, Rooyen Algurnon, Zijl Gideon (2021-03)
Rheology and Application of Buoyant Foam-Concrete for Digital Fabrication - Chougan Mehdi, Ghaffar Seyed, Sikora Paweł, Chung Sang-Yeop et al. (2021-02)
Investigation of Additive Incorporation on Rheological, Microstructural and Mechanical Properties of 3D Printable Alkali-Activated Materials - Dai Shuo, Zhu Huajun, Zhai Munan, Wu Qisheng et al. (2021-06)
Stability of Steel-Slag as Fine Aggregate and Its Application in 3D Printing Materials - Demont Léo, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2021-01)
Flow-Based Pultrusion of Continuous Fibers for Cement-Based Composite Material and Additive Manufacturing:
Rheological and Technological Requirements - Ding Tao, Xiao Jianzhuang, Qin Fei, Duan Zhenhua (2020-03)
Mechanical Behavior of 3D Printed Mortar with Recycled Sand at Early-Ages - Ding Tao, Xiao Jianzhuang, Zou Shuai, Wang Yu (2020-06)
Hardened Properties of Layered 3D Printed Concrete with Recycled Sand - Ding Tao, Xiao Jianzhuang, Zou Shuai, Yu Jiangtao (2021-03)
Flexural Properties of 3D Printed Fiber-Reinforced Concrete with Recycled Sand - Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2019-03)
An Approach to Develop Printable Strain-Hardening Cementitious Composites - Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2020-05)
Mechanical Behavior of Printed Strain-Hardening Cementitious Composites - Geng Zifan, She Wei, Zuo Wenqiang, Lyu Kai et al. (2020-09)
Layer-Interface Properties in 3D Printed Concrete:
Dual Hierarchical Structure and Micromechanical Characterization - Han Yilong, Yang Zhihan, Ding Tao, Xiao Jianzhuang (2020-08)
Environmental and Economic Assessment on 3D Printed Buildings with Recycled Concrete - Heras Murica Daniel, Genedy Moneeb, Taha Mahmoud (2020-09)
Examining the Significance of Infill-Printing-Pattern on the Anisotropy of 3D Printed Concrete - Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2020-01)
Yield-Stress-Criteria to Assess the Buildability of 3D Concrete Printing - Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2019-01)
Direct-Shear-Test for the Assessment of Rheological Parameters of Concrete for 3D Printing Applications - Jeon Kwang-Hyun, Park Min-Beom, Kang Min-Kyung, Kim Jung-Hoon (2013-11)
Development of an Automated Freeform Construction System and Its Construction Materials - Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
Cementitious Materials for Construction-Scale 3D Printing:
Laboratory Testing of Fresh Printing Mixture - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Kruger Jacques, Cho Seung, Zeranka Stephan, Vintila Cristian et al. (2019-12)
3D Concrete Printer Parameter Optimization for High-Rate Digital Construction Avoiding Plastic Collapse - Kruger Jacques, Plessis Anton, Zijl Gideon (2020-12)
An Investigation into the Porosity of Extrusion-Based 3D Printed Concrete - Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
3D Concrete Printing:
A Lower-Bound Analytical Model for Buildability-Performance-Quantification - Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
An Ab-Inito Approach for Thixotropy Characterisation of Nano-Particle-Infused 3D Printable Concrete - Kruger Jacques, Zeranka Stephan, Zijl Gideon (2020-04)
A Rheology-Based Quasi-Static Shape-Retention-Model for Digitally Fabricated Concrete - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Hardened Properties of High-Performance Printing Concrete - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Li Zhijian, Wang Li, Ma Guowei (2018-05)
Method for the Enhancement of Buildability and Bending-Resistance of 3D Printable Tailing Mortar - Li Leo, Xiao Bofeng, Fang Z., Xiong Z. et al. (2020-11)
Feasibility of Glass-Basalt Fiber-Reinforced Seawater Coral Sand Mortar for 3D Printing - Lim Sungwoo, Buswell Richard, Le Thanh, Wackrow Rene et al. (2011-07)
Development of a Viable Concrete Printing Process - Lim Sungwoo, Buswell Richard, Valentine Philip, Piker Daniel et al. (2016-06)
Modelling Curved-Layered Printing Paths for Fabricating Large-Scale Construction Components - Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement - Lim Jian, Weng Yiwei, Li Mingyang (2018-05)
Effect of Fiber-Reinforced Polymer on Mechanical Performance of 3D Printed Cementitious Material - Liu Zhixin, Li Mingyang, Tay Yi, Weng Yiwei et al. (2020-04)
Rotation-Nozzle and Numerical Simulation of Mass-Distribution at Corners in 3D Cementitious Material-Printing - Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing - Long Wujian, Tao Jie-Lin, Lin Can, Gu Yucun et al. (2019-08)
Rheology and Buildability of Sustainable Cement-Based Composites Containing Micro-Crystalline Cellulose for 3D Printing - Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2021-02)
Effect of Printing Parameters on Material-Distribution in Spray-Based 3D Concrete Printing (S-3DCP) - Lu Bing, Qian Ye, Li Mingyang, Weng Yiwei et al. (2019-04)
Designing Spray-Based 3D Printable Cementitious Materials with Fly-Ash-Cenosphere and Air-Entraining Agent - Lu Bing, Zhu Weiping, Weng Yiwei, Liu Zhixin et al. (2020-02)
Study of MgO-Activated-Slag as a Cementless Material for Sustainable Spray-Based 3D Printing - Ma Guowei, Li Zhijian, Wang Li (2017-12)
Printable Properties of Cementitious Material Containing Copper-Tailings for Extrusion-Based 3D Printing - Ma Guowei, Li Yanfeng, Wang Li, Zhang Junfei et al. (2020-01)
Real-Time Quantification of Fresh and Hardened Mechanical Property for 3D Printing Material by Intellectualization with Piezoelectric Transducers - Ma Guowei, Sun Junbo, Wang Li, Aslani Farhad et al. (2018-09)
Electromagnetic and Microwave-Absorbing Properties of Cementitious Composite for 3D Printing Containing Waste Copper Solids - Marchment Taylor, Sanjayan Jay (2020-09)
Bond Properties of Reinforcing Bar Penetrations in 3D Concrete Printing - Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
3D Printed Steel-Reinforcement for Digital Concrete Construction:
Manufacture, Mechanical Properties and Bond Behavior - Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2020-08)
Plastic Shrinkage Cracking in 3D Printed Concrete - Mohammad Malek, Masad Eyad, Ghamdi Sami (2020-12)
3D Concrete Printing Sustainability:
A Comparative Life Cycle Assessment of Four Construction Method Scenarios - Mohan Manu, Rahul Attupurathu, Tittelboom Kim, Schutter Geert (2020-10)
Rheological and Pumping Behavior of 3D Printable Cementitious Materials with Varying Aggregate Content - Muthukrishnan Shravan, Kua Harn, Yu Ling, Chung Jacky (2020-05)
Fresh Properties of Cementitious Materials Containing Rice-Husk-Ash for Construction 3D Printing - Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-09)
Effect of Microwave-Heating on Inter-Layer Bonding and Buildability of Geopolymer 3D Concrete Printing - Nair Sooraj, Panda Subhashree, Santhanam Manu, Sant Gaurav et al. (2020-05)
A Critical Examination of the Influence of Material-Characteristics and Extruder-Geometry on 3D Printing of Cementitious Binders - Nerella Venkatesh, Beigh Mirza, Fataei Shirin, Mechtcherine Viktor (2018-11)
Strain-Based Approach for Measuring Structural Build-Up of Cement-Pastes in the Context of Digital Construction - Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing - Nerella Venkatesh, Mechtcherine Viktor (2019-02)
Studying the Printability of Fresh Concrete for Formwork-Free Concrete Onsite 3D Printing Technology (CONPrint3D) - Nerella Venkatesh, Näther Mathias, Iqbal Arsalan, Butler Marko et al. (2018-09)
In-Line Quantification of Extrudability of Cementitious Materials for Digital Construction - Nguyen Vuong, Panda Biranchi, Zhang Guomin, Nguyen-Xuan Hung et al. (2021-01)
Digital Design Computing and Modelling for 3D Concrete Printing - Panda Biranchi, Bhagath Singh Gangapatnam, Unluer Cise, Tan Ming (2019-02)
Synthesis and Characterization of One-Part Geopolymers for Extrusion-Based 3D Concrete Printing - Panda Biranchi, Lim Jian, Mohamed Nisar, Paul Suvash et al. (2017-07)
Automation of Robotic Concrete Printing Using Feedback-Control-System - Panda Biranchi, Lim Jian, Tan Ming (2019-02)
Mechanical Properties and Deformation Behavior of Early-Age Concrete in the Context of Digital Construction - Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete - Panda Biranchi, Paul Suvash, Lim Jian, Tay Yi et al. (2017-08)
Additive Manufacturing of Geopolymer for Sustainable Built Environment - Panda Biranchi, Paul Suvash, Mohamed Nisar, Tay Yi et al. (2017-09)
Measurement of Tensile Bond Strength of 3D Printed Geopolymer Mortar - Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material - Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2018-11)
Improving the 3D Printability of High-Volume Fly-Ash Mixtures via the Use of Nano-Attapulgite-Clay - Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2020-01)
Investigation of the Properties of Alkali-Activated Slag Mixes Involving the Use of Nano-Clay and Nucleation-Seeds for 3D Printing - Panda Biranchi, Tan Ming (2018-03)
Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing - Panda Biranchi, Tan Ming (2018-11)
Rheological Behavior of High-Volume Fly-Ash Mixtures Containing Micro-Silica for Digital Construction Application - Panda Biranchi, Unluer Cise, Tan Ming (2018-10)
Investigation of the Rheology and Strength of Geopolymer Mixtures for Extrusion-Based 3D Printing - Panda Biranchi, Unluer Cise, Tan Ming (2019-08)
Extrusion and Rheology Characterization of Geopolymer Nanocomposites Used in 3D Printing - Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction - Pham Luong, Tran Jonathan, Sanjayan Jay (2020-04)
Steel-Fiber-Reinforced 3D Printed Concrete:
Influence of Fiber Sizes on Mechanical Performance - Putten Jolien, Deprez Maxim, Cnudde Veerle, Schutter Geert et al. (2019-09)
Microstructural Characterization of 3D Printed Cementitious Materials - Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2018-12)
3D Printable Concrete:
Mixture-Design and Test-Methods - Rahul Attupurathu, Sharma Abhishek, Santhanam Manu (2020-01)
A Desorptivity-Based Approach for the Assessment of Phase Separation During Extrusion of Cementitious Materials - Rehman Atta, Kim Jung-Hoon (2021-07)
3D Concrete Printing:
A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics - Reiter Lex, Wangler Timothy, Anton Ana-Maria, Flatt Robert (2020-05)
Setting-on-Demand for Digital Concrete:
Principles, Measurements, Chemistry, Validation - Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2018-06)
The Role of Early-Age Structural Build-Up in Digital Fabrication with Concrete - Şahin Oğuzhan, İlcan Hüseyin, Ateşli Anıl, Kul Anil et al. (2021-05)
Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing - Sambucci Matteo, Valente Marco (2021-06)
Influence of Waste-Tire-Rubber-Particles-Size on the Microstructural, Mechanical, and Acoustic Insulation Properties of 3D Printable Cement Mortars - Sanjayan Jay, Jayathilakage Roshan, Rajeev Pathmanathan (2020-11)
Vibration-Induced Active Rheology-Control for 3D Concrete Printing - Siddika Ayesha, Mamun Md., Ferdous Wahid, Saha Ashish et al. (2019-12)
3D Printed Concrete:
Applications, Performance, and Challenges - Soltan Daniel, Li Victor (2018-03)
A Self-Reinforced Cementitious Composite for Building-Scale 3D Printing - Sun Junbo, Huang Yimiao, Aslani Farhad, Wang Xiangyu et al. (2021-05)
Mechanical Enhancement for EMW-Absorbing Cementitious Material Using 3D Concrete Printing - Sun Xiaoyan, Wang Qun, Wang Hailong, Chen Long (2020-03)
Influence of Multi-Walled Nanotubes on the Fresh and Hardened Properties of a 3D Printing PVA Mortar Ink - Ting Guan, Tay Yi, Qian Ye, Tan Ming (2019-03)
Utilization of Recycled Glass for 3D Concrete Printing:
Rheological and Mechanical Properties - Ting Guan, Tay Yi, Tan Ming (2021-04)
Experimental Measurement on the Effects of Recycled Glass-Cullets as Aggregates for Construction 3D Printing - Weng Yiwei, Li Mingyang, Liu Zhixin, Lao Wenxin et al. (2018-12)
Printability and Fire Performance of a Developed 3D Printable Fiber-Reinforced Cementitious Composites under Elevated Temperatures - Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach - Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2018-01)
Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model - Weng Yiwei, Li Mingyang, Wong Teck, Tan Ming (2021-01)
Synchronized Concrete and Bonding-Agent-Deposition-System for Inter-Layer Bond Strength Enhancement in 3D Concrete Printing - Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing - Weng Yiwei, Qian Shunzhi, He Lewei, Li Mingyang et al. (2018-05)
3D Printable High-Performance Fiber-Reinforced Cementitious Composites For Large-Scale Printing - Weng Yiwei, Ruan Shaoqin, Li Mingyang, Mo Liwu et al. (2019-06)
Feasibility Study on Sustainable-Magnesium-Potassium-Phosphate Cement-Paste for 3D Printing - Xiao Jianzhuang, Zou Shuai, Yu Ying, Wang Yu et al. (2020-09)
3D Recycled Mortar Printing:
System-Development, Process-Design, Material-Properties and On-Site-Printing - Xu Jie, Buswell Richard, Kinnell Peter, Biro Istvan et al. (2020-06)
Inspecting Manufacturing Precision of 3D Printed Concrete Parts Based on Geometric Dimensioning and Tolerancing - Yuan Qiang, Zhou Dajun, Li Baiyun, Huang Hai et al. (2017-11)
Effect of Mineral Admixtures on the Structural Build-Up of Cement-Paste - Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Pereira Eduardo et al. (2021-03)
Influence of the Printing-Direction and Age on the Mechanical Properties of 3D Printed Concrete - Zhang Yu, Zhang Yunsheng, Liu Guojian, Yang Yonggan et al. (2018-04)
Fresh Properties of a Novel 3D Printing Concrete Ink - Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2021-02)
Hardened Properties and Durability of Large-Scale 3D Printed Cement-Based Materials
137 Citations
- Yuan Pu, Wang Xinjie, Huang Jie, Shi Quanbin et al. (2026-04)
Feasibility, Mechanical Properties, and Environmental Impact of 3D-Printed Mortar Incorporating Recycled Fine Aggregates from Decoration and Renovation Waste - Huang Jie, Wang Xinjie, Shi Quanbin, Yuan Pu et al. (2026-04)
Optimizing the Utilization Rate and Performance of 3D-Printed Mortar with Dual-Size Recycled Sand - Maurya Shubham, Panda Biranchi, Dixit Uday (2026-03)
Experimental Study on Void Reduction and Bonding Behavior in 3D Concrete Printing with a Trowel-Integrated Nozzle - Lu Pengyuan, Yang Yekai, Zhao Qingxin, Liu Zhongxian et al. (2026-03)
Low-Carbon 3D-Printed Geopolymer Ultra-High-Strength Concrete Enabled by Soda Residue:
Sustainable Development and Environmental Impact Assessment - Amjad Umar, Irshidat Mohammad, Maurya Muni, Rizmin Khadeejath et al. (2026-03)
Sustainable 3D Mortar Printing:
Material Optimization and Ultrasonic Characterization for Enhanced Construction Performance - Hassan Amer, Sabri Sabri, Alomayri Thamer, Sun Li et al. (2026-03)
Critical Review of Self-Healing Mechanisms in 3D-Printed Concrete:
Feasibility, Challenges, and Pathways Toward Durable Automated Construction - Sun Tianyu, Ren Zhongyuan, Liu Jiarui, Ong Dominic et al. (2026-02)
Rheology Properties and Future Trend of 3D Printing Concrete:
State of the Art Review - Garshasbi Sajad, Mousavi Seyed, Nazarpour Hadi, Dehestani Mehdi (2026-02)
Low Carbon Dioxide 3D Printable Concrete:
Balancing Rheology, Strength and Environmental Impact Using Bentonite and Ground Granulated Blast-Furnace Slag - Dey Dhrutiman, Panda Biranchi, Kole Jagabandhu (2026-02)
Investigation into the Effect of Full Replacement with Portland Slag Cement and Screened Slag Sand for Development of Sustainable 3D Printed Concrete - Kligys Modestas, Girskas Giedrius, Baltuškiene Daiva (2026-01)
Influence of the Amount of Mineral Additive on the Rheological Properties and the Carbon Footprint of 3D-Printed Concrete Mixtures - Teixeira João, Jesus Manuel, Rangel Bárbara, Alves Jorge et al. (2026-01)
Evaluation of Printing Performance of Cementitious Pastes with Alternative Powders - Agegn Adamu, Regassa Yohannes, Angassa Kenatu, Mekonnen Kebede (2026-01)
Systematic Review on 3D Concrete Printing Technology:
Breakthroughs and Challenges - Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud (2026-01)
Effect of Fly Ash, Basalt Fiber and Attapulgite Nanoclay on the Fresh Properties, Rheology and Shrinkage Behaviour of Printable Concrete - Brandão Filipe, Dias José, Aroso Francisca, Reis Rui et al. (2026-01)
Upcycling of Waste Fibers:
Enhancing Structural Integrity in 3DCP Through Fiber Reinforcement - Ribeiro Elis, Rangel Bárbara, Brandão Filipe, Figueiredo Bruno et al. (2026-01)
Improving Natural Ventilation Through 3D Concrete Printing - Murali Gunasekaran, Kravchenko Ekaterina, Yuvaraj Divya, Avudaiappan Siva (2025-12)
Next-Generation Green Construction:
3D-Printed Geopolymer Concrete with Optimized Rheology, Mechanical Performance, and Environmental Efficiency - Iqbal Imtiaz, Kasim Tala, Besklubova Svetlana, Inqiad Waleed et al. (2025-12)
Exploring Knowledge Domains and Future Research Directions in 3D Printed Concrete:
A Bibliometric and Systematic Review - Rangel Carolina, Salet Theo, Lucas Sandra (2025-12)
A Design Methodology for Sustainable Lightweight 3D-Printable Concrete with SCMs - Öztürk Ece, Ince Ceren, Borgianni Yuri, Nicolaides Demetris et al. (2025-12)
Printability, Engineering Properties and Environmental Implications of 3D-Printed Cementitious Mortars Incorporating Hydrated Lime, Tile Powder and Accelerator - Ramezani Mahyar, Kilic Ugur, Sherif Muhammad, Arce Gabriel et al. (2025-12)
Rheological Properties and Mechanical Response of Bio-Based Graphene Enhanced Additively Manufactured Cementitious Composites - Si Wen, Khan Mehran, McNally Ciaran (2025-11)
Rheological Optimization and Mechanical Performance Assessment of High-Volume GGBS-Silica Fume Mortars for 3D Printing - Tang Jiyu, Wang Zhihang, Gao Danying, Yang Lin et al. (2025-11)
Research Progress on 3D Printed Geopolymer Concrete - Garshasbi Sajad, Mousavi Seyed, Dehestani Mehdi, Nazarpour Hadi (2025-10)
Sustainable Production of 3D Concrete Printing Using Agricultural Waste Fibers - Jamifar Vahid, Eskandari‐Naddaf Hamid, Dehestani Mehdi (2025-10)
Optimizing Electric Arc Furnace Dust Utilization in 3D Printed Reinforced Cement Paste Using D‐Optimal Design of Experiments and Gray Wolf Optimization - Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2025-10)
Dual Strategies for Enhancing Carbonation Curing in 3D Printing Steel Slag Mortars:
Material Modification and Curing Process Innovation - Li Leo, Fei Zuojie, Jiao Chujie, Luo Tao et al. (2025-09)
Bauxite Residue-Based 3D Printing Mortar:
Enhancing Performance and Sustainability Through the Paste Replacement Approach - Liu Ruiying, Xiong Zhongming, Chen Xuan, Jia Qiong et al. (2025-09)
Industrial Waste in 3D Printed Concrete:
A Mechanistic Review on Rheological Control and Printability - Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions - Ghodke Swapnil, Singh Arshdeep, Singh Bhupinder, Chowdhury Shubhankar (2025-08)
Additively Manufactured Smart Materials and Structures in Construction and Building Applications - Si Wen, Khan Mehran, McNally Ciaran (2025-08)
Effect of Nano Silica with High Replacement of GGBS on Enhancing Mechanical Properties and Rheology of 3D Printed Concrete - Panchal Priyanka, Choi Myoungsung (2025-07)
A Review on Effect of Natural Fibers to Mitigate CO2 Footprint and Enhance Engineering Properties of 3D Printing Concrete - Bayrak Alper, Shaban Nefize, Sarıtaş Afsin, Meral Akgul Cagla (2025-07)
A Semi-Empirical Framework for Modeling Anisotropy, Spatial Variation and Failure Mechanisms in 3D Printed Concrete - Zhang Chao, Ren Juanjuan, Zhang Shihao, Guo Yipu et al. (2025-07)
Advanced Impact Resistance Design Through 3D-Printed Concrete Technology:
Unleashing the Potential of Additive Manufacturing for Protective Structures - Popli Siddharth, Valikhah Fatemeh, Zandi Lak Erfan, Das Sreekanta (2025-07)
Mechanical and Durability Performance of 3D-Printed Concrete with Coarse Aggregates and Cold Joints - Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
Enhancing the Mix Design in 3D Concrete Printing Through Systematic Optimization Process - Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
Advancing the Field of 3D Concrete Printing by Exploring the Use of Eco-Friendly Mortars - Girskas Giedrius, Kligys Modestas (2025-06)
3D Concrete Printing Review:
Equipment, Materials, Mix Design, and Properties - Sbardelotto Eduardo, Vieira Manuel, Ferreira dos Santos Karyne, Pereira dos Santos Samuel et al. (2025-06)
Exploratory Study on the Rheological Behaviour of 3D Printable Mortars Incorporating Fine Recycled Concrete Aggregates (FRCA) - Hopkins Ben, Si Wen, Khan Mehran, McNally Ciaran (2025-06)
Recent Advancements in Polypropylene Fiber-Reinforced 3D-Printed Concrete:
Insights into Mix Ratios, Testing Procedures, and Material Behaviour - Kaya Ebru, Ciza Baraka, Yalçınkaya Çağlar, Felekoğlu Burak et al. (2025-05)
A Comparative Study on the Effectiveness of Fly Ash and Blast Furnace Slag as Partial Cement Substitution in 3D Printable Concrete - Tanyildizi Harun, Seloglu Maksut, Bakri Abdullah Mohd, Razak Rafiza et al. (2025-04)
The Rheological and Mechanical Properties of 3D-Printed Geopolymers:
A Review - Thajeel Marwah, Kopecskó Katalin, Balázs György (2025-04)
Enhancing Printability of 3D Printed Concrete by Using Metakaolin and Silica Fume - Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
Optimizing 3D Geopolymer Concrete for Sustainable Construction:
A Review of Material Selection, Printing Methods, and Properties - Gulati Hemant, Lu Tianxing (2025-03)
Customized 3D Printable Concrete:
A Systematic Review of Challenges, Methodologies, and Adoption Strategies - Wang Qiang, Yang Wenwei, Wang Li, Bai Gang et al. (2025-03)
Reinforcement Design and Structural Performance for the Topology Optimized 3D Printed Concrete Truss Beams - Gardan Julien, Hedjazi Lofti, Attajer Ali (2025-02)
Additive Manufacturing in Construction:
State of the Art and Emerging Trends in Civil Engineering - Ambily Parukutty, Kaliyavaradhan Senthil, Sebastian Shilpa, Shekar Deepadharshan (2025-01)
Sustainable 3D Printable Concrete-Mix Using Copper-Slag - Hassan Amer, Alomayri Thamer, Noaman Mohammed, Zhang Chunwei (2025-01)
3D Printed Concrete for Sustainable Construction:
A Review of Mechanical Properties and Environmental Impact - Shahzad Qamar, Li Fangyuan (2025-01)
Impact of Concrete Interfaces on the Mechanical Performance of 3D Printed Concrete Structures - Raqeb Hanan, Ghaffar Seyed (2024-12)
3D Concrete Printing in Kuwait:
Stakeholder Insights for Sustainable Waste Management Solutions - Vargas Armando, Robayo-Salazar Rafael, Gutiérrez Ruby (2024-12)
Effects of Incorporating Fine Aggregates and Polypropylene-Micro-Fibers on the Cracking-Control of 3D Printed Cementitious Mixtures - Kopitha Kirushnapillai, Rajeev Pathmanathan, Sanjayan Jay, Elakneswaran Yogarajah (2024-12)
CO2 Sequestration and Low-Carbon-Strategies in 3D Printed Concrete - Dey Dhrutiman, Kumar Gaurav, Prasad Ventrapragada, Panda Biranchi (2024-12)
Experimental Investigation of Thermal Performance of 3D Printed Slab Infused with Lightweight Concrete as Insulation - Irshidat Mohammad, Cabibihan John-John, Fadli Fodil, Ramahi Siraj et al. (2024-12)
Waste Materials Utilization in 3D Printable Concrete for Sustainable Construction Applications:
A Review - Kul Anil, Kocaer Öznur, Aldemir Alper, Yıldırım Gürkan et al. (2024-12)
3D Printable One-Part Alkali-Activated Mortar Derived from Brick-Masonry-Wastes - Venugopal Reddy P., Nakkeeran G., Roy Dipankar, Alaneme George (2024-11)
Evaluating the Use of Recycled Fine Aggregates in 3D Printing:
A Systematic Review - Habibi Alireza, Buswell Richard, Osmani Mohamed, Aziminezhad Mohamadmahdi (2024-11)
Sustainability Principles in 3D Concrete Printing:
Analysing Trends, Classifying Strategies, and Future Directions - Thomsen Mette, Tamke Martin, Rossi Gabriella, Chiujdea Ruxandra-Stefania et al. (2024-11)
Sustainable Construction:
Additive Manufacturing in a Circular Design Framework - Murali Gunasekaran, Leong Sing (2024-11)
Waste-Driven Construction:
A State of the Art Review on the Integration of Waste in 3D Printed Concrete in Recent Researches for Sustainable Development - Zhi Zhenzhen, Guo Yanfei, Qi Huahui, Tan Hongbo et al. (2024-11)
Effect of Alkali-Metal-Sulfates on Hydration Properties of Alpha-Calcium-Sulfate-Hemihydrate for 3D Printing - Adamtsevich Liubov, Pustovgar Andrey, Adamtsevich Aleksey (2024-10)
Assessing the Prospects and Risks of Delivering Sustainable Urban Development Through 3D Concrete Printing Implementation - Lim Sean, Tan Ming (2024-10)
A Rheological Model for Concrete Additive Manufacturing - Jin Peng, Hasany Masoud, Kohestanian Mohammad, Mehrali Mehdi (2024-10)
Micro/Nano Additives in 3D Printing Concrete:
Opportunities, Challenges, and Potential Outlook in Construction Applications - Over Derya, Ozbakan Nesil, Bustani Mehmet, Karali Bulut (2024-10)
An Investigation of Rheological Properties and Sustainability of Various 3D Printing Concrete Mixtures with Alternative Binders and Rheological Modifiers - Samrani Phebe, Cao Yifang, Fimbres-Weihs Gustavo, Sanjaya Eric et al. (2024-09)
Effect of Fly-Ash and Ground Waste Glass as Cement Replacement in Concrete 3D Printing for Sustainable Construction - Maury-Ramírez Aníbal, Rinke Mario, Blom Johan (2024-09)
Low-Carbon Embodied, Self-Cleaning, and Air-Purifying Building Envelope Components Using TiO2 Photocatalysis, 3D Printing, and Recycling - Shivendra Bandoorvaragerahalli, Sharath Chandra Sathvik, Singh Atul, Kumar Rakesh et al. (2024-09)
A Path Towards SDGs:
Investigation of the Challenges in Adopting 3D Concrete Printing in India - Aldabergenova Gaziza, Jexembayeva Assel, Konkanov Marat, Kirgizbayev Akpan et al. (2024-09)
The Efficient Waste-Based Fine-Grained Fiber Concretes for 3D Printing - Srinivas Dodda, Boddepalli Uday, Dey Dhrutiman, Choaudhary Bhavesh et al. (2024-09)
Development of Outdoor Furniture Using 3D Concrete Printing - Dey Dhrutiman, Panda Biranchi (2024-09)
Numerical Evaluation of Thermal Performance and Improvement-Strategies for 3D Printed Concrete Structures - Kul Anil, Kocaer Öznur, Lucas Sandra (2024-09)
Anisotropic Characteristics of 3D Printed Geopolymer Mortars from End-of-Life Materials of Construction Industry - Rehman Saif, Riaz Raja, Usman Muhammad, Kim In-Ho (2024-08)
Augmented Data-Driven Approach Towards 3D Printed Concrete Mix Prediction - Aghaee Kamran, Li Linfei, Roshan Alireza, Namakiaraghi Parsa (2024-08)
Additive Manufacturing Evolution in Construction:
From Individual Terrestrial to Collective, Aerial, and Extraterrestrial Applications - Baktheer Abedulgader, Claßen Martin (2024-07)
A Review of Recent Trends and Challenges in Numerical Modeling of the Anisotropic Behavior of Hardened 3D Printed Concrete - Lu Bing, Li Mingyang, Qian Shunzhi, Li King et al. (2024-07)
High-Performance 3D Concrete Printing with Zeolite - Sun Chang, Li Jiawang, Liu Qiong, Chen Kailun et al. (2024-07)
Compressive Performance and Damage Mechanism of Concrete Short Columns Confined by Steel-Wires-Reinforced 3DPM - Aslani Farhad, Zhang Yifan (2024-06)
Sustainable 3D Printed Concrete Structures Using High-Quality Secondary Raw Materials - Kilic Ugur, Soliman Nancy, Omran Ahmed, Ozbulut Osman (2024-06)
Effects of Cellulose Nanofibrils on Rheological and Mechanical Properties of 3D Printable Cement Composites - González-Fonteboa Belén, Seara-Paz Sindy, Caneda-Martínez Laura (2024-06)
3D Printing Concrete with Byproducts - Zhuang Zicheng, Xu Fengming, Ye Junhong, Hu Nan et al. (2024-06)
A Comprehensive Review of Sustainable Materials and Tool-Path-Optimization in 3D Concrete Printing - Shoaei Parham, Kjøniksen Anna-Lena, Pamies Ramón, Pilehvar Shima (2024-05)
Characterization of 3D Printable Geopolymer Mortars:
Effect of Binder Composition and Basalt-Fiber-Reinforcement - Liu Qiong, Tang Huilin, Chen Kailun, Peng Bin et al. (2024-05)
Utilizing CO2 to Improve Plastic Shrinkage and Mechanical Properties of 3D Printed Mortar Made with Recycled Fine Aggregates - Yan Kang-Tai, Li Lingzhi, Ye Junhong, Bazarov Dilshod et al. (2024-05)
Anisotropic Size-Effect of 3D Printed LC3-Based Engineered Cementitious Composites - Khan Mehran, McNally Ciaran (2024-05)
Recent Developments on Low-Carbon 3D Printing Concrete:
Revolutionizing Construction Through Innovative Technology - Capêto Ana, Jesus Manuel, Uribe Braian, Guimarães Ana et al. (2024-05)
Building a Greener Future:
Advancing Concrete Production Sustainability and the Thermal Properties of 3D Printed Mortars - Zaid Osama, Ouni Mohamed (2024-04)
Advancements in 3D Printing of Cementitious Materials:
A Review of Mineral Additives, Properties, and Systematic Developments - Babafemi Adewumi, Norval Chris, Kolawole John, Paul Suvash et al. (2024-04)
3D Printed Limestone-Calcined-Clay-Cement Concrete Incorporating Recycled Plastic-Waste:
RESIN8 - Wang Jun, Liu Zhenhua, Hou Jia, Ge Mengmeng (2024-04)
Research-Progress and Trend-Analysis of Concrete 3D Printing Technology Based on CiteSpace - Robayo-Salazar Rafael, Vargas Armando, Martínez Fabio, Gutiérrez Ruby (2024-02)
Utilization of Powders and Fine Aggregates from the Recycling of Construction and Demolition Waste in the 3D Printing of Portland-Based Cementitious Materials - Kaliyavaradhan Senthil, Ambily Parukutty, Shekar Deepadharshan, Sebastian Shilpa (2024-02)
Effect of Sand-Gradations on the Fresh Properties of 3D Printable Concrete - Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior - Colyn Markus, Zijl Gideon, Babafemi Adewumi (2024-02)
Fresh and Strength Properties of 3D Printable Concrete Mixtures Utilising a High Volume of Sustainable Alternative Binders - Kakarla Akesh, Kong Ing, Patel Vipulkumar (2024-02)
Additive Manufacturing for Building and Constructions - Tang Weichen, Sun Junbo, Wang Yufei, Chen Zhaohui et al. (2024-02)
Electromagnetic Absorption Properties of 3D Printed Fiber-Oriented Composites Under Different Paths - Li Yu, Wu Hao, Xie Xinjie, Zhang Liming et al. (2024-02)
FloatArch:
A Cable-Supported, Unreinforced, and Re-Assemblable 3D Printed Concrete Structure Designed Using Multi-Material Topology-Optimization - Vaněk Vojtěch, Chomová Štěpánka, Pěnčík Jan (2024-01)
Additive Technologies in Construction:
Shifting the Paradigm of Building - Sahai Rajan, Bisht Ravindra, Malviya Nitesh, Kumar Shivam et al. (2024-01)
Aspects of Waste-Material-Utilization and 3D Concrete Printer Development-Approach:
A Review - Liu Qiong, Cheng Shengbo, Peng Bin, Chen Kailun et al. (2024-01)
The Buildability and Flexural Properties of 3D Printed Recycled Mortar Reinforced with Synchronized Steel-Cable Under Different Reinforcement Ratios - Khan Shayan, Ghazi Syed, Amjad Hassan, Imram Muhammad et al. (2023-12)
Emerging Horizons in 3D Printed Cement-Based Materials with Nano-Material-Integration:
A Review - Lucen Hao, Long Li, Shipeng Zhang, Huanghua Zhang et al. (2023-12)
The Synergistic Effect of Greenhouse Gas CO2 and Silica-Fume on the Properties of 3D Printed Mortar - Rocha Douglas, Faria Paulina, Lucas Sandra (2023-12)
Additive Manufacturing of Earth-Based Materials:
A Literature Review on Mortar-Composition, Extrusion, and Processing Earth - Li Zihan, Liu Huanbao, Nie Ping, Cheng Xiang et al. (2023-12)
Mechanical Properties of Concrete Reinforced with High-Performance Micro-Particles for 3D Concrete Printing - Eugenin Claudia, Cuevas Villalobos Karla, Navarrete Iván (2023-12)
Temperature-Dependance of 3D Printed Concrete Produced with Copper-Tailings - Xu Ping, Chen Tianyu, Fan Kaijun, Zhang Minxia (2023-11)
Effect of Nano-Silica-Sol Dosage on the Properties of 3D Printed Concrete - Tay Yi, Lim Sean, Phua Seng, Tan Ming et al. (2023-10)
Exploring Carbon-Sequestration-Potential Through 3D Concrete Printing - Kumar Lalit, Panda Biranchi, Muthu Nelson (2023-10)
A Simple Potential Energy Formulation for 3D Concrete Printed Structures Considering the Shear Effects in the Build-Direction - Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
From Analytical Modelling to Numerical Simulation - Shilar Fatheali, Ganachari Sharanabasava, Patil Veerabhadragouda, Bhojaraja B. et al. (2023-08)
A Review of 3D Printing of Geopolymer Composites for Structural and Functional Applications - Mousavi Seyed, Dehestani Mehdi (2023-07)
On the Possibility of Using Waste-Disposable-Gloves as Recycled Fibers in Sustainable 3D Concrete Printing Using Different Additives - Riaz Raja, Usman Muhammad, Ali Ammar, Majid Usama et al. (2023-06)
Inclusive Characterization of 3D Printed Concrete in Additive Manufacturing:
A Detailed Review - Liu Junli, Tran Jonathan, Nguyen Vuong, Gunasekara Chamila et al. (2023-06)
3D Printing of Cementitious Mortar with Milled Recycled Carbon-Fibers:
Influences of Filament Offset on Mechanical Properties - Deng Qi, Zou Shuai, Xi Yonghui, Singh Amardeep (2023-06)
Development and Characteristic of 3D Printable Mortar with Waste-Glass-Powder - Vespalec Arnošt, Podroužek Jan, Koutný Daniel (2023-04)
DoE Approach to Setting Input Parameters for Digital 3D Printing of Concrete for Coarse Aggregates up to 8 mm - Paul Suvash, Basit Md, Hasan Noor, Dey Dhrutiman et al. (2023-04)
3D Printing of Geopolymer Mortar:
Overview of the Effect of Mix-Design and Printing Parameters on the Strength - Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen, Mandhari Othman et al. (2023-04)
3D Printing of Limestone-Calcined-Clay-Cement:
A Review of Its Potential Implementation in the Construction-Industry - Kumar Devalla Tharun, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2023-04)
Investigation on the Flexural and Tensile Performance of 3D Printable Cementitious Mixtures Considering the Effect of Fiber-Distribution - Maurya Shubham, Dey Dhrutiman, Panda Biranchi, Dixit Uday (2023-04)
In-Line Reinforcement of Steel-Cable in 3D Concrete Printing - Panda Biranchi, Tran Jonathan (2023-03)
Material-Design, Additive Manufacturing, and Performance of Cement-Based Materials - Fonseca Mariana, Matos Ana (2023-03)
3D Construction Printing Standing for Sustainability and Circularity:
Material-Level Opportunities - Quah Tan, Tay Yi, Lim Jian, Tan Ming et al. (2023-03)
Concrete 3D Printing:
Process-Parameters for Process-Control, Monitoring and Diagnosis in Automation and Construction - Dey Dhrutiman, Sahu Akshay, Prakash Srajan, Panda Biranchi (2023-03)
A Study into the Effect of Material-Deposition-Methods on Hardened Properties of 3D Printed Concrete - Wang Dianchao, Xiao Jianzhuang, Sun Bochao, Zhang Shipeng et al. (2023-02)
Mechanical Properties of 3D Printed Mortar Cured by CO2 - Noaimat Yazeed, Ghaffar Seyed, Chougan Mehdi, Kheetan Mazen (2022-12)
A Review of 3D Printing Low-Carbon Concrete with One-Part Geopolymer:
Engineering, Environmental and Economic Feasibility - Boddepalli Uday, Gandhi Indu, Panda Biranchi (2022-12)
Stability of Three-Dimensional Printable Foam-Concrete as Function of Surfactant Characteristics - Robayo-Salazar Rafael, Gutiérrez Ruby, Villaquirán-Caicedo Mónica, Delvasto Arjona Silvio (2022-12)
3D Printing with Cementitious Materials:
Challenges and Opportunities for the Construction Sector - Srinivas Dodda, Dey Dhrutiman, Panda Biranchi, Sitharam Thallak (2022-12)
Printability, Thermal and Compressive Strength Properties of Cementitious Materials:
A Comparative Study with Silica-Fume and Limestone - D'Haese Romain, Carpentier Olivier, Dubois Vincent, Chafei Sawsen et al. (2022-10)
3D Printable Materials Made with Industrial Byproducts:
Formulation, Fresh and Hardened Properties - Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-10)
The Fresh and Hardened Properties of 3D Printing Cement-Base Materials with Self-Cleaning Nano-TiO2:
An Exploratory Study - Dey Dhrutiman, Panda Biranchi (2022-10)
An Experimental Study of Thermal Performance of 3D Printed Concrete Slabs - Hansemann Georg, Holzinger Christoph, Schmid Robert, Tapley Joshua et al. (2022-09)
Lightweight Reinforced Concrete Slab - Boddepalli Uday, Panda Biranchi, Gandhi Indu (2022-09)
Rheology and Printability of Portland-Cement-Based Materials:
A Review - Dey Dhrutiman, Srinivas Dodda, Boddepalli Uday, Panda Biranchi et al. (2022-09)
3D Printability of Ternary-Portland-Cement Mixes Containing Fly-Ash and Limestone - Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2022-09)
Recycling of Flash-Calcined Dredged Sediment for Concrete 3D Printing - Kaliyavaradhan Senthil, Ambily Parukutty, Prem Prabhat, Ghodke Swapnil (2022-08)
Test-Methods for 3D Printable Concrete - Khosravani Mohammad, Haghighi Azadeh (2022-08)
Large-Scale Automated Additive Construction:
Overview, Robotic Solutions, Sustainability, and Future Prospect - Nguyen Vuong, Nguyen-Xuan Hung, Panda Biranchi, Tran Jonathan (2022-03)
3D Concrete Printing Modelling of Thin-Walled Structures - Tay Yi, Lim Jian, Li Mingyang, Tan Ming (2022-03)
Creating Functionally Graded Concrete Materials with Varying 3D Printing Parameters
BibTeX
@article{dey_srin_pand_sura.2022.UoIWMf3PoSC,
author = "Dhrutiman Dey and Dodda Srinivas and Biranchi Narayan Panda and Prannoy Suraneni and Thallak G. Sitharam",
title = "Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete: A Review",
doi = "10.1016/j.jclepro.2022.130749",
year = "2022",
journal = "Journal of Cleaner Production",
volume = "340",
}
Formatted Citation
D. Dey, D. Srinivas, B. N. Panda, P. Suraneni and T. G. Sitharam, “Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete: A Review”, Journal of Cleaner Production, vol. 340, 2022, doi: 10.1016/j.jclepro.2022.130749.
Dey, Dhrutiman, Dodda Srinivas, Biranchi Narayan Panda, Prannoy Suraneni, and Thallak G. Sitharam. “Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete: A Review”. Journal of Cleaner Production 340 (2022). https://doi.org/10.1016/j.jclepro.2022.130749.