Skip to content

Aouad Georges

Information

ORCID
0000-0003-4088-7788
First Contribution
2017-04-14
Last Contribution
2023-06-26
Number Contributions
11
Number Citations
544

Top Co-Authors

  1. Rémond Sébastien (8)
  2. Baz Bilal (7)
  3. Khalil Noura (4)
  4. Kleib Joelle (3)
  5. Daher Jana (2)

Top Cited Articles

  1. Khalil Noura, Aouad Georges, Cheikh Khadija, Rémond Sébastien (2017-09)
    Use of Calcium-Sulfoaluminate-Cements for Setting-Control of 3D Printing Mortars (186)

Persons This Author Cites the Most

  1. Tan Ming (34)
  2. Panda Biranchi (31)
  3. Bos Freek (24)
  4. Salet Theo (24)
  5. Buswell Richard (23)

Persons This Author Is Cited Most By

  1. Cao Xiangpeng (22)
  2. Cui Hongzhi (22)
  3. Mechtcherine Viktor (20)
  4. Rémond Sébastien (16)
  5. Xiao Jianzhuang (16)

  1. Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2023-06)
    The Development of Soil-Based 3D Printable Mixtures:
    A Mix-Design Methodology and a Case Study
  2. Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2022-09)
    Recycling of Flash-Calcined Dredged Sediment for Concrete 3D Printing
  3. Inaty Francois, Baz Bilal, Aouad Georges (2022-07)
    Long-Term Durability-Assessment of 3D Printed Concrete
  4. Baz Bilal, Aouad Georges, Kleib Joelle, Bulteel David et al. (2021-04)
    Durability-Assessment and Micro-Structural Analysis of 3D Printed Concrete Exposed to Sulfuric-Acid Environments
  5. Baz Bilal, Rémond Sébastien, Aouad Georges (2021-01)
    Influence of the Mix Composition on the Thixotropy of 3D Printable Mortars
  6. Baz Bilal, Aouad Georges, Khalil Noura, Rémond Sébastien (2020-11)
    Inter-Layer Reinforcement of 3D Printed Concrete Elements
  7. Baz Bilal, Aouad Georges, Leblond Philippe, Mansouri Omar et al. (2020-05)
    Mechanical Assessment of Concrete:
    Steel Bonding in 3D Printed Elements
  8. Baz Bilal, Aouad Georges, Rémond Sébastien (2020-01)
    Effect of the Printing Method and Mortar’s Workability on Pull-Out Strength of 3D Printed Elements
  9. Khalil Noura, Rémond Sébastien, Baz Bilal, Aouad Georges (2018-09)
    Characterization of 3D Printing Mortars Made with OPC-CSA Mixes
  10. Khalil Noura, Aouad Georges, Cheikh Khadija, Rémond Sébastien (2017-09)
    Use of Calcium-Sulfoaluminate-Cements for Setting-Control of 3D Printing Mortars
  11. Cheikh Khadija, Rémond Sébastien, Khalil Noura, Aouad Georges (2017-04)
    Numerical and Experimental Studies of Aggregate-Blocking in Mortar-Extrusion