Skip to content

#waste

Keywords by Co - Occurrence

  1. Chourasia Ajay, Pal Biswajit, Kapoor Ashish, Kumar R. (2026-04)
    Influence of Mix Constituents on the Printability and Compressive Strength of Binary and Ternary Cementitious Composite Made of Agro-Industrial Waste
  2. Yuan Pu, Wang Xinjie, Huang Jie, Shi Quanbin et al. (2026-04)
    Feasibility, Mechanical Properties, and Environmental Impact of 3D-Printed Mortar Incorporating Recycled Fine Aggregates from Decoration and Renovation Waste
  3. Nayak Anitha, Nayaka Ramesh, Zhang Y. (2026-04)
    Performance Evaluation, Microstructure Behaviour and Life Cycle Assessment of 3D Concrete Printable Ink Containing Recycled Construction Waste
  4. Ramakrishnan Sayanthan, Ramesh Akilesh, Pasupathy Kirubajiny, Mechtcherine Viktor et al. (2026-04)
    Enhancing the Printability and Sustainability of 3D Concrete Printing Using Recycled Waste Glass as a Cement Substitute
  5. Baccaro Arianna, Calà Adriana, Famoso Martina, Santoro Enza (2026-04)
    3D Printing with Recycled Materials:
    A Review on the Viability of Bio-Waste and Stone Waste in Construction Applications
  6. Hinge Pawan, Bhagat Rajesh, Nandurkar Bhupesh, Pande Prashant et al. (2026-03)
    Sustainable 3D-Printed Concrete:
    Integrating E-Waste Plastics for Enhanced Printability, Mechanical Strength, and Long-Term Durability Sets
  7. Timm Kim, Villiers Wibke, Zijl Gideon (2026-03)
    3D Concrete Printing in the Waste Hierachy:
    Reduce, Reuse and Recycle
  8. Krishnaraja A., Kulanthaivel P., Manoharan Arunkumar, Muthusamy Suresh et al. (2026-03)
    Engineered Cementitious Composites with Nano Calcium Carbonate and Corona Waste Mask Fibers for Sustainable 3D Printing Applications
  9. Kolářová Mária, Kloužková Alexandra, Lauermannová Anna-Marie, Záleská Martina et al. (2026-03)
    Incorporation of Waste Glass Dust with Pigments Containing Cd, S, and Se into Magnesium Oxychloride Cement for Sustainable Production Using 3D Printing
  10. Marchuk Vitaliy, Makarenko Ruslan, Dvorkin Leonid, Ribakov Yuri (2026-02)
    Modifying the Properties of Construction Mixtures Containing Crushed Concrete Waste for 3D Printing
  11. Mo Jinxu, Lu Han, Ren Fengming, Lai Mianheng et al. (2026-02)
    Impact of Waste Rubber Powder Size and Replacement Ratio on the Compressive Strength Anisotropy and Pore Structure of 3D Printed Concrete
  12. Kocaer Öznur (2026-02)
    Environmental Assessment of Waste-Derived Materials in 3D Concrete Printing and Cast-in-Place Construction Through a BIM-Integrated Multi-Scale Life Cycle Assessment Framework
  13. Li Long, Lu Shuaijie, Singh Amardeep, Hao Lucen et al. (2026-02)
    Improving Buildability and Reducing Carbon Emission of 3D Printed Concrete via CO2 Mixing and Waste Glass Powder:
    A Synergistic Approach
  14. Qureshi Mohsin, Shizawi Amira, Kindi Ghassan, Sawafi Bushra et al. (2026-01)
    Development of Cementitious Material by Incorporating Fine Waste Materials for Testing in Newly Developed Portable Concrete 3D Printer
  15. Li Junjie, Li Yangbo, Ge Xianqiang, Li Ke et al. (2026-01)
    Strength Enhancement of 3D-Printed Phosphogypsum Concrete Based on Synergistic Activation of Multi-Solid Wastes
  16. Sapata Alise, Spuriņa Ella, Alzard Mohammed, Šlosbergs Pēteris et al. (2026-01)
    Low-CO2 Concrete from Oil Shale Ash and Construction Demolition Waste for 3D Printing
  17. Padilla-Encinas Pilar, Corani Jose, Cuevas Jaime, Guerrero Ana et al. (2026-01)
    Valorisation of Industrial Wastes in Magnesium Potassium Phosphate Cements for Extrusion-Based 3D Printing
  18. Sun Junbo, Wang Haihong, Zhang Yu, Liu Han et al. (2026-01)
    Sustainable Utilization of Waste in the 3D Printed Concrete
  19. Mu Xiaoshao, Zhang Xiaoling, He Gang, Liew Kim (2026-01)
    Toward Low-Carbon 3D Concrete Printing Through Circular Construction and Waste Valorization
  20. Melero-Tur Sofía, Jiménez-Guerrero Adriano, Pérez-Fenoy José, Barbero-Barrera María (2026-01)
    Re-Imagining the Production of 3D Printed Ceramics Through the Incorporation of Waste Materials
  21. Brandão Filipe, Dias José, Aroso Francisca, Reis Rui et al. (2026-01)
    Upcycling of Waste Fibers:
    Enhancing Structural Integrity in 3DCP Through Fiber Reinforcement
  22. Aabbas Mohamed, Mazian Brahim, Ahachad Mohammed, Zoghlami Aya et al. (2025-12)
    Sustainable 3D Printed Clay Bricks Incorporating Coffee Waste:
    Toward Circular Economy in Construction
  23. Ferrari Lucia, Rizzieri Giacomo, Ferrara Liberato, Franzoni Elisa (2025-12)
    Rheological Control of Cementitious Composites Incorporating Ceramic Wastes for 3D Printing Applications
  24. Baharlou Ehsan, Datta Ipsita, Ozbulut Osman (2025-12)
    Feasibility of 3D Printing Oyster Shell Waste Laden Hydrogel Inks for Developing Mycelium Composite in Architectural Materials
  25. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2025-11)
    Enhancing Thermo-Mechanical and Moisture Properties of 3D-Printed Concrete Through Recycled Ultra-Fine Waste Glass Powder:
    Corrigendum
  26. Baah Thomas, Kim Heejeong, Latypov Marat (2025-11)
    Multi-Objective Adaptive Experimental Approach for Optimizing 3D Concrete Printing Mixtures and Parameters Incorporating Construction and Demolition Waste for Sustainable Construction
  27. Zhang Jiao-Long, Yuan Yong, Fatoyinbo Imoleayo, Zhou Lujie et al. (2025-11)
    3D-Printable Mortars Incorporating Municipal Solid Waste Incineration Bottom Ash:
    Linking Hydration to Extrudability and Mechanical Performance
  28. Lu Qi, Hua Sudong, Yue Hongfei (2025-11)
    Effect of Spherical Electric Arc Slag on Solid Waste-Based 3D-Printed Concrete
  29. Maroszek Marcin, Rudziewicz Magdalena, Shah Syed, Tran Doan et al. (2025-11)
    Development of Eco-Friendly Construction Materials for 3D Printing Using Fly Ash and Demolition Waste
  30. Garshasbi Sajad, Mousavi Seyed, Dehestani Mehdi, Nazarpour Hadi (2025-10)
    Sustainable Production of 3D Concrete Printing Using Agricultural Waste Fibers
  31. Ding Yong, Kindler Robert, Cen Tianyu, Chen Xiulin et al. (2025-10)
    Valorization of Demolition Waste and Biomass Byproduct into Sustainable Building Materials via Carbon Mineralization and 3D Printing
  32. Akgümüş Fatih, Şahin Hatice, Mardani Ali (2025-10)
    Investigation of Waste Steel Fiber Usage Rate and Length Change on Some Fresh State Properties of 3D Printable Concrete Mixtures
  33. Lyu Ping, Wang Kejin, Doyle Shelby, Laflamme Simon et al. (2025-10)
    Green 3D Printing Concrete Containing Biochar and Waste Wind Turbine Blade Powder
  34. Mahmood Ali, Nanos Nikos, Begg David, Dhakal Hom (2025-10)
    Recycled Waste Materials Utilised in 3D Concrete Printing for Construction Applications:
    A Scientometric Review
  35. Yousaf Arslan, Rashid Ans, Koç Muammer (2025-09)
    Additive Manufacturing for Vernacular Architecture Using Local Earthen Soil and Bio-Waste Materials
  36. Liu Ruiying, Xiong Zhongming, Chen Xuan, Jia Qiong et al. (2025-09)
    Industrial Waste in 3D Printed Concrete:
    A Mechanistic Review on Rheological Control and Printability
  37. Wang Yufei, Sun Junbo, Wang Xiangyu, Huang Bo et al. (2025-09)
    Environmental and Economic Evaluation of a Prefabricated 3D-Printed Structural Units Using Recycled Aggregates from Construction and Demolition Waste:
    A Case Study in China
  38. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun (2025-09)
    Development of Sustainable 3D Printing Concrete Materials:
    Impact of Natural Minerals and Wastes at High Replacement Ratios
  39. Lin Yini, Yan Jiachuan, Sun Ming, Tang Boyang et al. (2025-08)
    Effects of Waste Glass Powder on Printability, Hydration and Microstructure of 3D Printing Concrete
  40. Sapata Alise, Pluminss Ernests, Šlosbergs Pēteris, Šinka Māris (2025-08)
    Utilizing Construction Demolition Waste Aggregates in Cement- Free Concrete for 3D Printing
  41. Xiahou Xiaer, Ding Xingyuan, Yu Ke-Ke, Lu Cong (2025-08)
    From Waste to Strength:
    Sustainable Valorization of Modified Recycled PET Fibers for Rheological Control and Performance Enhancement in 3D Printed Concrete
  42. Eid Zainab, Almurbati Nehal (2025-07)
    Applications of 3D Printing Buildings Using Construction and Demolition Waste:
    Techniques and Considerations
  43. Kravchenko Ekaterina, Raza Muhammad, Besklubova Svetlana, Lazorenko Georgy (2025-07)
    Transforming Construction Waste into Resources for 3D Printed Concrete
  44. Vico Lujano Raúl, Pérez Villarejo Luis, Novais Rui, Hidalgo-Torrano Pilar et al. (2025-07)
    Optimized Mortar Formulations for 3D Printing:
    A Rheological Study of Cementitious Pastes Incorporating Potassium-Rich Biomass Fly Ash Wastes
  45. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Manalo Allan, Sanjayan Jay (2025-07)
    Rheological, Mechanical and Fire Resistance Performance of Waste Glass Activated Geopolymers for Concrete 3D Printing
  46. Pan Keheng, Cheng Yinhan, Qu Guangfei, Yuan Zheng et al. (2025-07)
    Development and Optimization of Geopolymer-Based 3D Printing Materials Utilizing Industrial Solid Waste:
    Rheological Properties and Practical Applications
  47. Yousaf Arslan, Khan Shoukat, Koç Muammer (2025-07)
    Material, Process, and Design Optimization of Local Earthen Soil Reinforced with Natural Fiber Waste and Nanoclay for 3DP of Functional Structures
  48. Balina Karina, Gailitis Rihards, Šinka Māris, Argalis Pauls et al. (2025-07)
    Prospective LCA for 3D-Printed Foamed Geopolymer Composites Using Construction Waste as Additives
  49. Sakhare Vishakha, Khairnar Neha, Dahatonde Ulka, Mashalkar Shilpa (2025-06)
    Review on Sustainability in 3D Concrete Printing:
    Focus on Waste Utilization and Life Cycle Assessment
  50. Noaimat Yazeed, Chougan Mehdi, Sambucci Matteo, Valente Marco et al. (2025-06)
    Optimising Limestone Calcined Clay Cement Containing Excavated Low-Grade Waste Clay for 3D Printing Applications
  51. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John (2025-06)
    Enhancing 3D Printed Concrete Through Waste Fly Ash:
    A Comprehensive Approach to Sustainable and Efficient Mix Design
  52. Ye Chengjie, Xu Jie, Lacidogna Giuseppe (2025-06)
    Fracture Behavior of 3D Printed Geopolymer Concrete Containing Waste Ceramic
  53. Dai Pengfei, Luo Zhenhua, Wang Yalun, Mbabazi Justin et al. (2025-06)
    Waste Plastic Fiber Reinforced Cementitious Cavity Structures Manufactured by Mortar Extrusion 3D Printing
  54. Pereira Carolina, Vieira Henrique, Gonçalves Nuno, Ascensão Guilherme et al. (2025-05)
    Innovative Waste-Containing 3D-Printed Geopolymer Structures for Enhanced Acoustic Comfort in Built Environments
  55. Tao Yaxin, Zhang Yi, Mohan Manu, Dai Xiaodi et al. (2025-05)
    Waste-Derived Aggregates in 3D Printable Concrete:
    Current Insights and Future Perspectives
  56. Irshidat Mohammad, Albeitjali Naeem, Amjad Umar, Alnuaimi Hamad et al. (2025-05)
    From Waste to Strength:
    Recycled Steel Fibers for Sustainable 3D Printing of Cementitious Composites
  57. Sapata Alise, Šinka Māris, Puzule Līga, Plūmiņš Ernests et al. (2025-05)
    Developing Low-CO₂ 3D-Printable Concrete with Waste Ash and Recycled Aggregates
  58. Liang Yingming, He Jincheng, Niu Like, Chen Junwei et al. (2025-05)
    Experimental Study on Printability of Solid Waste Concrete Based on 3D Printing Technology
  59. Ali Shah Syed, Zhang Shipeng, Xuan Dongxing, Poon Chi (2025-04)
    Development of a Novel Mixing Strategy for Set-on-Demand Printing of One-Part Geopolymer Using Municipal Solid Waste Incineration Bottom Ash and Blast Furnace Slag
  60. İlcan Hüseyin, Külak Adnan, Şahin Oğuzhan, Aldemir Alper et al. (2025-04)
    Reinforcement and Modular System for 3DCP Geopolymer Structures Using Construction and Demolition Waste
  61. Calmanovici Miran, Livne Achiya, Barath Shany (2025-03)
    From Waste to Resource:
    A Design to Fabrication Approach Integrating Recycled Wood-Mycelium Mixtures for 3D Printing in Architecture
  62. Kuang Weifeng, Pavlenko Petro, Guo Haoyu, Tian Kuo et al. (2025-03)
    Utilization of Machine-Made Sand Waste in 3D-Printed Ecological Concrete for Artificial Reefs
  63. Silveira Júnior Jairon, Sakata Rafael, Onghero Lucas, Matos Paulo et al. (2025-03)
    Al-Anodizing Waste as a Supplementary Cementitious Material for 3D-Printed Portland Cement
  64. Li Yifan, Chen Shuisheng, Yang Liuhua, Guo Chuan et al. (2025-02)
    Investigation of the Impact of Material Rheology on the Interlayer Bonding Performance of Solid Waste 3D-Printed Components
  65. Yuan Yong, Fatoyinbo Imoleayo, Sheng Ruiyi, Wang Qiling et al. (2025-02)
    Advancing the Applicability of Recycled Municipal Solid Waste Incineration Bottom Ash as a Cement Substitute in Printable Concrete:
    Emphasis on Rheological and Microstructural Properties
  66. Mengistu Girum, Nemes Rita (2025-02)
    Evaluating the Performance of Recycled Aggregate Concrete Incorporating 3D-Printed Concrete Waste as Aggregate Using the Rebound Hammer Test
  67. Gurunandan M., Nedunuri Aparna, Tanwar Jayant, Nanthagopalan Prakash et al. (2025-02)
    Development of 3D-Printable Alkali-Activated GGBFS and Fly-Ash-Binder-Based Mortars with Concrete-Demolition-Waste as Aggregates
  68. Chourasia Ajay, Pal Biswajit, Kapoor Ashish (2025-02)
    Influence of Printing Direction and Interlayer Printing Time on the Bond Characteristics and Hardened Mechanical Properties of Agro-Industrial Waste-Based 3D Printed Concrete
  69. Raqeb Hanan, Ghaffar Seyed (2024-12)
    3D Concrete Printing in Kuwait:
    Stakeholder Insights for Sustainable Waste Management Solutions
  70. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-12)
    Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing Technology:
    Corrigendum
  71. Irshidat Mohammad, Cabibihan John-John, Fadli Fodil, Ramahi Siraj et al. (2024-12)
    Waste Materials Utilization in 3D Printable Concrete for Sustainable Construction Applications:
    A Review
  72. Kul Anil, Kocaer Öznur, Aldemir Alper, Yıldırım Gürkan et al. (2024-12)
    3D Printable One-Part Alkali-Activated Mortar Derived from Brick-Masonry-Wastes
  73. Yaqub Walid, Aslani Farhad (2024-12)
    Mechanical Properties and Fire-Resistance of 3D Printed Cementitious Composites with Plastic Waste
  74. Heinze Lisa, Liebringshausen Anne, Eversmann Philipp (2024-11)
    3D Printing with Wood Waste:
    Development of Reusable Printing Material Based on Waste Wood Particles and Its Digital Manufacturing Process for Wall Constructions in Architecture
  75. Murali Gunasekaran, Leong Sing (2024-11)
    Waste-Driven Construction:
    A State of the Art Review on the Integration of Waste in 3D Printed Concrete in Recent Researches for Sustainable Development
  76. Li Jiannan, Singh Amardeep, Zhao Yasong, Sun Jingting et al. (2024-11)
    Enhancing Thermo-Mechanical and Moisture Properties of 3D Printed Concrete Through Recycled Ultra-Fine Waste-Glass-Powder
  77. Immelman Jandré, Pourbehi Mohammad, Ameh Alechine, Katambwe Vinny et al. (2024-11)
    Characterisation and Formulation of Waste Augmented 3D Printable Concrete for BIM-Based Automation
  78. Eid Zainab, Almerbati Nehal (2024-10)
    Methodologies to Assess the Environmental Impact of 3D Printed Buildings Using Construction Waste
  79. Sun Junbo, Zhang Yanling, Wu Qi, Wang Yufei et al. (2024-10)
    3D Printed Concrete Incorporating Waste-Rubber:
    Anisotropic Properties and Environmental Impact-Analysis
  80. Zhao Wanting, Zhao Yu, Zhu Lingli, Guan Xuemao (2024-10)
    Preparation of 3D Printed Concrete from Solid Waste:
    Study of the Relationship Between Steel-Slag Characteristics and Early Performance in 3D Printing
  81. Samrani Phebe, Cao Yifang, Fimbres-Weihs Gustavo, Sanjaya Eric et al. (2024-09)
    Effect of Fly-Ash and Ground Waste Glass as Cement Replacement in Concrete 3D Printing for Sustainable Construction
  82. Aldabergenova Gaziza, Jexembayeva Assel, Konkanov Marat, Kirgizbayev Akpan et al. (2024-09)
    The Efficient Waste-Based Fine-Grained Fiber Concretes for 3D Printing
  83. Curth Alexander, Pearl Natalie, Wissemann Emily, Cousin Tim et al. (2024-09)
    EarthWorks:
    Zero-Waste 3D Printed Earthen Formwork for Shape-Optimized, Reinforced Concrete Construction
  84. Chajec Adrian, Šavija Branko (2024-09)
    The Effect of Using Surface Functionalized Granite-Powder-Waste on Fresh Properties of 3D Printed Cementitious Composites
  85. Romani Alessia, Levi Marinella (2024-09)
    Large-Format Material-Extrusion Additive Manufacturing for Circular Economy Practices:
    A Focus on Product-Applications with Materials from Recycled Plastics and Biomass-Waste
  86. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Han Jinsheng et al. (2024-09)
    Influence of Waste-Glass-Powder on Printability and Mechanical Properties of 3D Printing Geopolymer Concrete
  87. Kamhawi Abdallah, Brown Jacob, Fahmy Ali, Meibodi Mania (2024-09)
    Waste-Free Production of Ultra-Thin Concrete Panels via Robotic 3D Printing and CNC Dynamic Bed Device
  88. Farhan Abdul, Xu Jie, Dobrzanski James, Kolawole John et al. (2024-09)
    Quantifying 3D Concrete Printing Production Waste
  89. Tudela Marcell, Cardenas Palomino Kelssy, Bienvenu Sophie, Dunkelberg Federico et al. (2024-09)
    Development and Characterization of a Printable Concrete Made with Construction and Demolition-Waste-Aggregates
  90. Lacambra-Andreu Xavier, Scheel Mario, Poulesquen Arnaud (2024-09)
    Enhancing 3D Printability of Metakaolin-Based Geopolymers for Nuclear Waste Filtration Applications
  91. Matos Paulo, Schackow Adilson, Safanelli Nicollas, Zat Tuani (2024-09)
    Developing Binders with Ceramic Waste for 3DCP Mixes
  92. Zhao Hongyu, Wang Yufei, Liu Xianda, Wang Xiangyu et al. (2024-08)
    Review on Solid Wastes Incorporated Cementitious Material Using 3D Concrete Printing-Technology
  93. Yan Ruizhen, Meng Fangqi, Ke Guoju, Jia Kerui (2024-08)
    Comparative Evaluation of the Applicability of 3D Printing Mortar with Different Waste-Powders
  94. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Mechtcherine Viktor, Sanjayan Jay (2024-07)
    Alkali-Activated Waste Glass-Based Geopolymer Concrete for Digital Construction
  95. Butkutė Karolina, Vaitkevičius Vitoldas, Adomaitytė Fausta (2024-07)
    Eco-Friendly 3D Printed Concrete Made with Waste and Organic Artificial Aggregates
  96. Rajeev Pathmanathan, Ramesh Akilesh, Navaratnam Satheeskumar, Sanjayan Jay (2024-07)
    Using Fiber Recovered from Face Mask Waste to Improve Printability in 3D Concrete Printing
  97. Villiers Wibke, Mwongo Mwiti, Babafemi Adewumi, Zijl Gideon (2024-06)
    Quantifying Recycled Construction and Demolition Waste for Use in 3D Printed Concrete
  98. Muy Yeakleang, Courard Luc, Garnavault Xavier, Bulteel David et al. (2024-06)
    Mechanical Properties and Freezing and Thawing Behavior of 3D Printing Concrete Containing Recycled Fine Aggregates from Construction and Demolition Waste
  99. Romario Yulius, Bhat Chinmai, Ramezani Maziar, Jiang Cho-Pei (2024-06)
    Marine-Waste-Management of Oyster-Shell-Waste as Reinforcement for Clay Additive Manufacturing Components
  100. Besklubova Svetlana, Raza Muhammad, Zhong Ray, Skibniewski Mirosław (2024-06)
    3D Printing vs. Traditional Construction:
    Cost Comparisons from Design to Waste Disposal Stages
  101. Patel Abhishek, Raphael Benny (2024-04)
    Robotic 3D Printing of Structural Slabs Using Polyethylene Waste as Filler to Reduce Carbon Footprint
  102. Babafemi Adewumi, Norval Chris, Kolawole John, Paul Suvash et al. (2024-04)
    3D Printed Limestone-Calcined-Clay-Cement Concrete Incorporating Recycled Plastic-Waste:
    RESIN8
  103. İlcan Hüseyin, Külak Adnan, Şahmaran Mustafa (2024-03)
    3D Printable Construction and Demolition Waste-Based Geopolymer:
    Investigating the Effects of Additives on Engineering Properties
  104. Robayo-Salazar Rafael, Vargas Armando, Martínez Fabio, Gutiérrez Ruby (2024-02)
    Utilization of Powders and Fine Aggregates from the Recycling of Construction and Demolition Waste in the 3D Printing of Portland-Based Cementitious Materials
  105. Mengistu Girum, Nemes Rita (2024-01)
    Recycling 3D Printed Concrete Waste for Normal Strength Concrete Production
  106. Sahai Rajan, Bisht Ravindra, Malviya Nitesh, Kumar Shivam et al. (2024-01)
    Aspects of Waste-Material-Utilization and 3D Concrete Printer Development-Approach:
    A Review
  107. Pavlin Majda, Horvat Barbara, Cerc Korošec Romana, Capuder Rok et al. (2024-01)
    Characterisation of a 3D Printed Alkali-Activated Material Based on Waste-Mineral-Wool at Room and Elevated Temperatures
  108. Dai Pengfei, Lyu Qifeng, Zong Meirong, Zhu Pinghua (2024-01)
    Effect of Waste-Plastic-Fibers on the Printability and Mechanical Properties of 3D Printed Cement Mortar
  109. Carvalho Ivo, Melo Abcael, Melo Carlos, Brito Mateus et al. (2023-12)
    Evaluation of the Effect of Rubber-Waste-Particles on the Rheological and Mechanical Properties of Cementitious Materials for 3D Printing
  110. Zhu Binrong, Wang Yufei, Sun Junbo, Wei Yang et al. (2023-10)
    An Experimental Study on the Influence of Waste-Rubber-Particles on the Compressive, Flexural and Impact Properties of 3D Printable Sustainable Cementitious Composites
  111. Zhang Xiaowei, Guo Chuwen, Ma Jianhong, Jiao Huazhe et al. (2023-10)
    Utilization of Solid Mine-Waste in the Building Materials for 3D Printing
  112. Yue Hongfei, Zhang Zhuxian, Hua Sudong, Gao Yanan et al. (2023-09)
    Solid Waste-Based Set-on-Demand 3D Printed Concrete:
    Active Rheological-Control of Cement-Based Magneto-Rheological Fluids
  113. Ospina Salazar Ana, Valencia Isaza Andrés, Restrepo Montoya José, Mejía Arcila Johanna et al. (2023-09)
    Upcycling Fly-Ash, Red-Clay-Brick Waste, and Paper-Sludge as Feedstock for Manufacturing a Lightweight Extruded Composite:
    Design and Characterization
  114. Matos Ana (2023-09)
    Waste Marble Valorisation in 3D Cementitious Materials Printing
  115. Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
    Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
    Effect of Operational- and Material-Oriented Parameters
  116. Balkhy Wassim, Bing Scott, Babidi Saad, Lafhaj Zoubeir et al. (2023-07)
    The Analysis of Lean Wastes in Construction 3D Printing:
    A Case Study
  117. Mousavi Seyed, Dehestani Mehdi (2023-07)
    On the Possibility of Using Waste-Disposable-Gloves as Recycled Fibers in Sustainable 3D Concrete Printing Using Different Additives
  118. Tu Haidong, Wei Zhenyun, Bahrami Alireza, Kahla Nabil et al. (2023-06)
    Recent Advancements and Future Trends in 3D Printing Concrete Using Waste-Materials
  119. Mortada Youssef, Masad Eyad, Kogbara Reginald, Mansoor Bilal et al. (2023-06)
    Development of Ca(OH)2-Based Geopolymer for Additive Manufacturing Using Construction Wastes and Nano-Materials
  120. Robayo-Salazar Rafael, Martínez Fabio, Vargas Armando, Gutiérrez Ruby (2023-06)
    3D Printing of Hybrid Cements Based on High Contents of Powders from Concrete, Ceramic and Brick Waste Chemically Activated with Sodium Sulphate (Na2SO4)
  121. Deng Qi, Zou Shuai, Xi Yonghui, Singh Amardeep (2023-06)
    Development and Characteristic of 3D Printable Mortar with Waste-Glass-Powder
  122. Vergara Luis, Pérez Juan, Colorado Henry (2023-05)
    3D Printing of Ordinary Portland Cement with Waste-Wood-Derived Biochar Obtained from Gasification
  123. Rajeev Pathmanathan, Ramesh Akilesh, Navaratnam Satheeskumar, Sanjayan Jay (2023-04)
    Using Fiber Recovered from Face Mask Waste to Improve Printability in 3D Concrete Printing
  124. Valente Marco, Sambucci Matteo, Chougan Mehdi, Ghaffar Seyed (2023-04)
    Composite Alkali-Activated Materials with Waste-Tire-Rubber Designed for Additive Manufacturing:
    An Eco-Sustainable and Energy Saving Approach
  125. Ma Xiaosong, Tan Linzhen, Lu Yuanjing, Yao Wu et al. (2023-03)
    Upcycling of Waste Plasterboard for the Synthesis of High-Quality Gypsum-Based 3D Printing-Powder
  126. Li Xiao-Sheng, Li Long, Zou Shuai (2023-02)
    Developing Low-pH 3D Printing Concrete Using Solid Wastes
  127. Sambucci Matteo, Biblioteca Ilario, Valente Marco (2023-01)
    Life Cycle Assessment (LCA) of 3D Concrete Printing and Casting Processes for Cementitious Materials Incorporating Ground Waste Tire Rubber
  128. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Sanjayan Jay (2023-01)
    3D Concrete Printing of Eco-Friendly Geopolymer Containing Brick Waste
  129. Jesus Manuel, Costa Joana, Teixeira João, Pessoa Ana Sofia et al. (2023-01)
    Use of Waste Materials to Reduce Cement and Natural Aggregates in 3D Printing Mortars
  130. Uddin Md (2022-12)
    Influence of 3D Printable Sustainable Concrete and Industrial Waste on Industry 5.0
  131. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Ozcelikci Emircan et al. (2022-12)
    Rheological Property and Extrudability Performance-Assessment of Construction and Demolition Waste-Based Geopolymer Mortars with Varied Testing Protocols
  132. Rech Arianna, Chiujdea Ruxandra-Stefania, Colmo Claudia, Rossi Gabriella et al. (2022-11)
    Waste-Based Biopolymer-Slurry for 3D Printing Targeting Construction Elements
  133. Demiral Nazim, Ozkan Ekinci Mehmet, Şahin Oğuzhan, İlcan Hüseyin et al. (2022-10)
    Mechanical Anisotropy Evaluation and Bonding Properties of 3D Printable Construction and Demolition Waste-Based Geopolymer Mortars
  134. Mir Namra, Khan Shoukat, Kul Anil, Şahin Oğuzhan et al. (2022-08)
    Life Cycle Assessment of Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
  135. Kovaleva Daria, Nistler Maximilian, Verl Alexander, Blandini Lucio et al. (2022-06)
    Zero-Waste Production of Lightweight Concrete Structures with Water-Soluble Sand Formwork
  136. Ren Chuangnan, Hua Dongliang, Bai Yonghui, Wu Shuang et al. (2022-06)
    Preparation and 3D Printing Building Application of Sulfoaluminate-Cementitious-Material Using Industrial Solid-Waste
  137. Wang Bolin, Zhai Mingang, Yao Xiaofei, Wu Qing et al. (2022-03)
    Printable and Mechanical Performance of 3D Printed Concrete Employing Multiple Industrial Wastes
  138. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Yıldırım Gürkan et al. (2022-03)
    Rheological Properties and Compressive Strength of Construction and Demolition Waste-Based Geopolymer Mortars for 3D Printing
  139. Liu Siyu, Lu Bing, Li Hongliang, Pan Zehua et al. (2022-03)
    A Comparative Study on Environmental Performance of 3D Printing and Conventional Casting of Concrete Products with Industrial Wastes
  140. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Suraneni Prannoy et al. (2022-02)
    Use of Industrial Waste-Materials for 3D Printing of Sustainable Concrete:
    A Review
  141. Sambucci Matteo, Valente Marco (2021-06)
    Influence of Waste-Tire-Rubber-Particles-Size on the Microstructural, Mechanical, and Acoustic Insulation Properties of 3D Printable Cement Mortars
  142. Cuevas Villalobos Karla, Chougan Mehdi, Martin Falk, Ghaffar Seyed et al. (2021-05)
    3D Printable Lightweight Cementitious Composites with Incorporated Waste-Glass-Aggregates and Expanded Microspheres:
    Rheological, Thermal and Mechanical Properties
  143. Şahin Oğuzhan, İlcan Hüseyin, Ateşli Anıl, Kul Anil et al. (2021-05)
    Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
  144. Bai Gang, Wang Li, Ma Guowei, Sanjayan Jay et al. (2021-03)
    3D Printing Eco-Friendly Concrete Containing Under-Utilised and Waste Solids as Aggregates
  145. Shahzad Qamar, Wang Xujiang, Wang Wenlong, Wan Yi et al. (2020-06)
    Coordinated Adjustment and Optimization of Setting-Time, Flowability, and Mechanical Strength for Construction 3D Printing Material Derived from Solid Waste
  146. Rehman Atta, Lee Sang-Min, Kim Jung-Hoon (2020-06)
    Use of Municipal Solid-Waste Incineration-Ash in 3D Printable Concrete
  147. Ma Guowei, Sun Junbo, Wang Li, Aslani Farhad et al. (2018-09)
    Electromagnetic and Microwave-Absorbing Properties of Cementitious Composite for 3D Printing Containing Waste Copper Solids