Skip to content

#construction

Keywords by Co - Occurrence

  1. Nayak Anitha, Nayaka Ramesh, Zhang Y. (2026-04)
    Performance Evaluation, Microstructure Behaviour and Life Cycle Assessment of 3D Concrete Printable Ink Containing Recycled Construction Waste
  2. Rajkumar P., Reethu D., Shyamala G., Aamri Ahmed et al. (2026-04)
    Advances in Additive Manufacturing for Construction:
    A Scientometric analysis of 3D Printing Research
  3. Singh S., Aggarwal Anchal (2026-04)
    3D Concrete Printing and Its Role in Modern Construction:
    Concept to Reality
  4. Sangiorgio Valentino, Valeri Manuela, Cantagallo Christina, Guth C. et al. (2026-04)
    Performance and Evolution of Materials for 3D Construction Printing:
    An Overview from Conventional to Extreme Environments
  5. Baccaro Arianna, Calà Adriana, Famoso Martina, Santoro Enza (2026-04)
    3D Printing with Recycled Materials:
    A Review on the Viability of Bio-Waste and Stone Waste in Construction Applications
  6. Mastropasqua Antonio, Lagrasta Francesco, Nicolò Michele, Pontrandolfo Pierpaolo (2026-03)
    Investigating the Environmental Impact of Additive Construction:
    A Systematic Analysis of the Life Cycle Assessment Studies
  7. Lal Dhirajkumar, Rangari Vinay, Khare Karan (2026-03)
    Structural Optimization and Cost-Efficient Development of an Indigenous Gantry-Type 3D Concrete Printing System for Scalable Construction Applications
  8. Amjad Umar, Irshidat Mohammad, Maurya Muni, Rizmin Khadeejath et al. (2026-03)
    Sustainable 3D Mortar Printing:
    Material Optimization and Ultrasonic Characterization for Enhanced Construction Performance
  9. Bai Songlin, Yao Xiaofei, Yang Min, Liu Shilong et al. (2026-03)
    Design and Construction of Spatial Curved Structures Based on Concrete Additive Manufacturing:
    A Case Study of an Irregular Gatehouse
  10. Hassan Amer, Sabri Sabri, Alomayri Thamer, Sun Li et al. (2026-03)
    Critical Review of Self-Healing Mechanisms in 3D-Printed Concrete:
    Feasibility, Challenges, and Pathways Toward Durable Automated Construction
  11. Silvennoinen Heidi, Honic Meliha, Slavkovic Katarina, Block Philippe et al. (2026-03)
    Additive Manufacturing for Circular Construction:
    A Review of Design Strategies and Their Assessment
  12. Marchuk Vitaliy, Makarenko Ruslan, Dvorkin Leonid, Ribakov Yuri (2026-02)
    Modifying the Properties of Construction Mixtures Containing Crushed Concrete Waste for 3D Printing
  13. Lolli Francesca, Mehlomakulu Bungane, Azari Jafari Hessam, Kirchain Randolph et al. (2026-02)
    On the Sustainability of Digital Construction:
    Whole Building Life Cycle Carbon Emissions According to Three Construction Techniques
  14. Esan Taiwo, Kupolati Williams, Ackerman Chris (2026-02)
    Advances in Additive Manufacturing for Architectural Acoustics:
    Design, Materials, Validation, and Implementation Challenges in Building Construction
  15. Mirmotalebi Seyedali, Moon Hyosoo, Tesiero Raymond, Noor Sadia (2026-02)
    Comparative Evaluation of Voxel and Mesh Representations for Digital Defect Detection in Construction-Scale Additive Manufacturing.
  16. Liu Bei, Wang Hao, Yin Haibin, Li Yufeng (2026-02)
    Design Method and Mechanical Properties of Construction 3D Printing Infill Structures Inspired by Origami Patterns
  17. Dvorkin Leonid, Marchuk Vitaliy (2026-02)
    Construction Mixtures for 3D Printing
  18. Dvorkin Leonid, Marchuk Vitaliy (2026-02)
    Modified Ash-Containing Construction Mixtures for 3D Printing
  19. Zhou Wenjuan, Yang Can, He Xiao, Zhou Mingli et al. (2026-02)
    Sustainably 3D-Printing Mortar with Construction Residue Sand:
    Printability, Mechanical Properties, and Microstructural Mechanisms
  20. Kocaer Öznur (2026-02)
    Environmental Assessment of Waste-Derived Materials in 3D Concrete Printing and Cast-in-Place Construction Through a BIM-Integrated Multi-Scale Life Cycle Assessment Framework
  21. Nguyen Vuong, Du Hongjian (2026-02)
    Underwater 3D Concrete Printing:
    Automation Challenges, Process-Material Coupling, and Future Construction Pathways
  22. Javan Kazem, Chaggar Pooja, Darestani Mariam, Markhali Bijan et al. (2026-02)
    Workability of Geopolymer Concrete and Mortar Materials: A Systematic Review of Influencing Parameters and Optimization for Sustainable Construction Materials
  23. Tafur Ginette, Rivera Cristhofer, Torres Pablo (2026-02)
    Evaluation of Sustainable 3D Concrete with Partial Replacement of Fine Aggregate by PET and Addition of Coconut Fibers:
    Impact on Construction with the Use of 3D Gantry-Type Printers in Peru
  24. Mollah Md., Šeta Berin, Spangenberg Jon (2026-02)
    A Virtual 3D Printing Framework for Off-Earth Construction
  25. Bihari Ádám, Nemes Rita (2026-01)
    Investigation of Water Vapor Adsorption and Thermal Conductivity Properties of Stabilized Earth Mixtures for the Construction of 3D Printed Wall Structures
  26. Babajaniniashirvani Vida, McCoy Andrew, Yanamala Akhileswar (2026-01)
    Construction Transformation Through Automation:
    Analyzing the Trends and Intersection of Industrialized Construction and 3D Concrete Printing Technologies
  27. Banijamali Kasra, Giwa Ilerioluwa, Fiske Michael, Kazemian Ali (2026-01)
    Planetary Robotic Construction on the Moon and Mars Using Waterless Sulfur–Regolith Printing Materials
  28. Mirmotalebi Seyedali, Moon Hyosoo, Tesiero Raymond, Noor Sadia (2026-01)
    Defect Detection and Quality Control in 3D-Printed Construction Elements Using High-Resolution 3D Scanning and Deep Learning Models
  29. Paul Aranya, Manosalvas Holst Carlos, Berryman Charles, Friedland Carol et al. (2026-01)
    Development of Sustainable Low-Cement Construction 3D Printing Materials via Dense Particle Packing
  30. Sapata Alise, Spuriņa Ella, Alzard Mohammed, Šlosbergs Pēteris et al. (2026-01)
    Low-CO2 Concrete from Oil Shale Ash and Construction Demolition Waste for 3D Printing
  31. Mu Xiaoshao, Zhang Xiaoling, He Gang, Liew Kim (2026-01)
    Toward Low-Carbon 3D Concrete Printing Through Circular Construction and Waste Valorization
  32. Alawadi Fatemah, Murphy Martina, Eadie Robert (2026-01)
    Challenges and Solutions for Scalability of Affordable Housing:
    A Literature Review on 3D Printed Construction in Kuwait
  33. Norouzi Yasaman, Dixit Manish (2026-01)
    A Review of Advantages and Challenges of Using Hempcrete for 3D Printing in Construction
  34. Driouich Anas, Dalconi Maria, Franchin Giorgia, Bettanini Carlo et al. (2026-01)
    Optimization of Alkali-Activated Regolith Simulants for Lunar Construction by 3D Printing
  35. Dubey Pratik, Maurya Madan (2026-01)
    A Comprehensive Review of 3D Printing in Construction:
    Technology, Materials, and Digital Workflow
  36. Bugarin Juan, Hajjar Ayla, Ssengooba Aloysious, Rangel Bárbara et al. (2026-01)
    Advancing Circular Bioeconomy and Sustainable Construction in the Iberian Peninsula:
    Addressing the Potential of Timber Residues for 3D Printing
  37. Gnanaraj Anies, Moreno Leyla, Thabet Reham, Rangel Bárbara et al. (2026-01)
    Comparative Analysis of Onsite Versus Offsite 3D Printing in Construction:
    Benefits, Challenges, and Case Studies
  38. Cunha Jaime, Rangel Bárbara, Vilas-Boas Rodrigo (2026-01)
    Evaluating the Environmental Efficiency of on-Site and Off-Site 3D Construction Printing:
    A Roadmap Towards Sustainable Building Practices
  39. Wang Hanmo, Wan Yujia, Owyong Shawn, Connie Lim En et al. (2026-01)
    Towards Low-Carbon Construction:
    Nature-Inspired Internal Patterns for Thermal Insulation in Lightweight Concrete Component Cast Using 3D-Printed Formwork
  40. Zhu Binrong, Qi Miao, Chen Wei, Pan Jinlong (2025-12)
    Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction
  41. Murali Gunasekaran, Kravchenko Ekaterina, Yuvaraj Divya, Avudaiappan Siva (2025-12)
    Next-Generation Green Construction:
    3D-Printed Geopolymer Concrete with Optimized Rheology, Mechanical Performance, and Environmental Efficiency
  42. Aabbas Mohamed, Mazian Brahim, Ahachad Mohammed, Zoghlami Aya et al. (2025-12)
    Sustainable 3D Printed Clay Bricks Incorporating Coffee Waste:
    Toward Circular Economy in Construction
  43. Skoury Lior, Asaf Ofer, Sprecher Aaron, Menges Achim et al. (2025-12)
    Data-Informed Digital Twin for Large-Scale 3D Printing in Construction
  44. Gierlinger David, Hansemann Georg, Schmid Robert, Trummer Andreas et al. (2025-12)
    Design and Construction with 3D Concrete Printing
  45. Kovaleva Daria, Haufe Carl, Miller Olga, Gericke Oliver et al. (2025-12)
    Lightweight and Sustainable Construction with Concrete:
    The Role of Digital Design and Manufacturing Methods at ILEK
  46. Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
    Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
    A Systematic Review
  47. Anton Ana-Maria, Lin Che, Dillenburger Benjamin (2025-12)
    Reinforcement Concepts for 3D Concrete Printing and Modular Construction in Tor Alva
  48. Wang Hailong, Shi Yiqing, Sun Xiaoyan, Lin Xiqiang et al. (2025-12)
    Design, Multi-Scale Structural Analysis, and Construction of Modular Prefabricated 3D-Printed Concrete Residence
  49. Soshinskiy Olexander, Rashkevich Nina, Shakhov Stanislav, Melnychenko Andrii (2025-11)
    Formulating a Calculation Methodology for Assessing the Strength Characteristics of Building Structures Constructed with a Construction 3D Printer
  50. Ebiloma David, Olatunbosun Olajumoke, Isang Inimbom, Aigbavboa Clinton (2025-11)
    Assessing the Effects of 3D-Printed Concrete for Sustainable Construction:
    The Stakeholders' Perspective
  51. Xia Chen, Lee Chang, Leifer Max, Zheng Bujingda (2025-11)
    Additive Reinforced Concrete for Multifunctional Construction Component
  52. Baah Thomas, Kim Heejeong, Latypov Marat (2025-11)
    Multi-Objective Adaptive Experimental Approach for Optimizing 3D Concrete Printing Mixtures and Parameters Incorporating Construction and Demolition Waste for Sustainable Construction
  53. Adeel Muhammad (2025-11)
    Three-Dimensional Concrete Printing for Sustainable Construction and Architecture:
    A Comprehensive Review
  54. Silva Neesha, Rajapaksha Upendra, Udawattha Chameera (2025-11)
    Tailoring 3D Printing for Personalized Housing:
    Selecting the Right Technology for Custom Home Construction
  55. Menkabo Mazin, Acero Carlos (2025-11)
    Transforming Construction with 3D Concrete Printing:
    Aramco's Experience and Insights
  56. Song Qiang, Zhou Guangyu, Bao Hailing, Liu Qiong (2025-11)
    Study on the Effects of Nozzle Proximal Carbonation Mixing and Vacuum Dewatering on the Printability and Mechanical Properties of the 3D Printed Construction Mortar
  57. Maroszek Marcin, Rudziewicz Magdalena, Shah Syed, Tran Doan et al. (2025-11)
    Development of Eco-Friendly Construction Materials for 3D Printing Using Fly Ash and Demolition Waste
  58. Sahu Akshay, Panda Biranchi (2025-11)
    An Additive Manufacturing-Oriented Design Approach for Digital Construction
  59. Matos Ana, Milheiro-Oliveira Paula, Varum Humberto (2025-11)
    New Technologies for Earth Construction:
    3D Printing, a Reality or a Mirage?
  60. Assi Lateef, Alsalman Ali, Kareem Rahman, Carter Kealy (2025-11)
    Advantages and Challenges of 3D Geopolymer-Based Concrete in Construction
  61. Öztürk Ece, Borgianni Yuri, Ince Ceren (2025-10)
    3D Printing in the Construction Sector:
    Identification of Key Topics, Technologies, Applications and Relevant Factors Discussed in the Literature
  62. Mesoudy Mouad, Foulki Rida, Amegouz Driss (2025-10)
    3D Concrete Printing:
    Optimizing the Design of Interlocking 3D Printed Concrete Blocks for Fast and Sustainable Construction
  63. Ataei Sarah, Jafari Amirhosein (2025-10)
    Comparative Environmental Impact Assessment of 3D Concrete Printing and Precast Techniques in Bridge Construction:
    A Case Study Analysis
  64. Gajjar Parth, Gajjar T., Tangirala Aniruddha, Shrestha Ajad (2025-10)
    Advancing 3D Printing in Construction:
    Rheological Behaviors of Cementitious Composites with Supplementary Materials
  65. Altehaini Zakiah, Dayili Mohammed, Alrajab Meshari, Harbi Adel et al. (2025-10)
    Deploying 3D Concrete Printing for Large-Scale Building Construction in Saudi Arabia:
    A Case Study
  66. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-10)
    Next-Generation Net-Zero Composite for Underwater 3D Printing Construction:
    Hybrid Machine Learning Optimized LC3 with Recycled Rubber
  67. Boldini Alain, Giwa Ilerioluwa, Kamel Ehsan, Kazemian Ali (2025-10)
    Spatiotemporal Temperature Prediction in 3D-Printed Sulfur Concrete for Automated Construction on Earth and Beyond
  68. Ozturk Onur, Lunsford Caleb, Nair Sriramya (2025-10)
    Advancing Underwater Construction with 3D Printing:
    A Two-Stage Approach
  69. Mahmood Ali, Nanos Nikos, Begg David, Dhakal Hom (2025-10)
    Recycled Waste Materials Utilised in 3D Concrete Printing for Construction Applications:
    A Scientometric Review
  70. Reznik Petro, Volodymyrov Anton, Tenesesku Vladyslav, Firsov Pavlo (2025-10)
    Numerical Analysis of 3D-Printed Permanent Formwork in Multi-Story Building Construction
  71. Lee Chang-Hwan, Gwak Kwan-Woong (2025-09)
    Experimental Validation of a Cable Driven Parallel Robot for 3D Printing Building Construction
  72. Elhag Ahmed, Mabrouk Abdelkader, Ghazouani Nejib, Nasir Umara (2025-09)
    Advances in Sustainable 3D-Printed Geopolymer Concrete:
    Materials, Performance, and Environmental Impact in Next Generation Green Construction
  73. Lopes de Aquino Brasil Alexander, Carmo Pena (2025-09)
    A Systematic Review of Robotic Additive Manufacturing Applications in Architecture, Engineering, and Construction
  74. Marifah Sofa, Saputri Utamy, Permadi Dio (2025-09)
    Systematic Literature Review:
    3D Printing Technology for Sustainable Construction Innovation
  75. Kua Harn, Shi A., Kajandran V., Lam T. et al. (2025-09)
    Toward Sustainable Construction 3D Printing:
    Limestone and Non-Calcined Recycled Marine Clay as Partial Cement Replacement
  76. Wang Yufei, Sun Junbo, Wang Xiangyu, Huang Bo et al. (2025-09)
    Environmental and Economic Evaluation of a Prefabricated 3D-Printed Structural Units Using Recycled Aggregates from Construction and Demolition Waste:
    A Case Study in China
  77. Ramirez Rodriguez Fatima, Ahmad Rafiq (2025-09)
    Sustainable Technology Advances for Additive Construction:
    A State-of-the-Art Review
  78. Sari Mustika, Berawi Mohammed, Taswin William, Saroji Gunawan et al. (2025-09)
    Work Breakdown Structure and Construction Process Framework for a Hybrid 3D-Printed Modular Building
  79. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
    Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
    A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
  80. Mararo Ian, Babafemi Adewumi, Aigbavboa Clinton (2025-09)
    Towards Understanding the Perceptions of 3D Construction Printing in Kenya
  81. Shukla Bishnu, Bharti Gaurav, Parashar Bhupender, Sharma Pushpendra et al. (2025-09)
    Variables Influencing the Performance of 3D Concrete Printing for Sustainable Construction:
    Current Status and Future Prospects
  82. Ghodke Swapnil, Singh Arshdeep, Singh Bhupinder, Chowdhury Shubhankar (2025-08)
    Additively Manufactured Smart Materials and Structures in Construction and Building Applications
  83. Ozturk Onur, Lunsford Caleb, Strait James, Nair Sriramya (2025-08)
    Breaking Barriers in Underwater Construction:
    A Two-Stage 3D Printing System with On-Demand Material Adaptation
  84. Murtaza Ghulam, Baldinelli Giorgio (2025-08)
    Revolutionizing Architecture:
    3D Printing in Large Construction Industry and Strategic Innovations for Enhanced Performance
  85. Banihashemi Saeed, Akbarnezhad Ali, Sheikhkhoshkar Moslem, Haouzi Hind et al. (2025-08)
    3D Printing in Construction:
    Sustainable Technology for Building Industry
  86. Zhang Nan, Sanjayan Jay (2025-08)
    Concrete 3D Printing and Digital Fabrication Technologies for Bridge Construction
  87. Bradford Katy, Gentry Russell, Alon Lola, Kurtis Kimberly (2025-08)
    Construction 3D Printing Material Selection:
    Minimizing Cost and Carbon Footprint of Residential Wall Assemblies
  88. Si Wen, Carr Liam, Zia Asad, Khan Mehran et al. (2025-08)
    Advancing 3D Printable Concrete with Nanoclays:
    Rheological and Mechanical Insights for Construction Applications
  89. Henao-Rios Laura, Orobio Armando, Campaña Wilmer (2025-08)
    BIM Integration in Prefabricated Additive Construction Projects:
    Case Study
  90. Sapata Alise, Pluminss Ernests, Šlosbergs Pēteris, Šinka Māris (2025-08)
    Utilizing Construction Demolition Waste Aggregates in Cement- Free Concrete for 3D Printing
  91. Shilar Fatheali, Ganachari Sharanabasava, Osman N., Ramesh S. et al. (2025-08)
    Advancements in Fiber-Reinforced Geopolymer Along with 3D Printed and Nano Concrete in Sustainable Construction
  92. Eid Zainab, Almurbati Nehal (2025-07)
    Applications of 3D Printing Buildings Using Construction and Demolition Waste:
    Techniques and Considerations
  93. Raza Muhammad, Besklubova Svetlana, Kravchenko Ekaterina, Zhong Ray (2025-07)
    Economic Viability of 3D Concrete Printing:
    A Comparative Study with Traditional Construction Method
  94. Cai Yilin, Hartell Julie, Aryal Ashrant (2025-07)
    Real-Time Multimodal Sensing System for Additive Construction by Extrusion:
    Integrating Thermal, Depth and RGB Data
  95. Xu Raymond, Morita Luka, Khosravian Parmida, Itani Anas (2025-07)
    Scaled-Down Simulation and Analysis of On-Site Robotic Fabrication and Construction
  96. Banda-Pérez Pablo, Georgiou Ioulios, Carrasco Pérez Patricio, Soria Romanella et al. (2025-07)
    Deployment for Additive Construction Through Digital Platforms:
    Gananoque Project as a Case Study
  97. Iqbal Imtiaz, Besklubova Svetlana, Kasim Tala (2025-07)
    Assessment Framework for 3D Concrete Printing Technology in Alignment with Construction 5.0 Criteria
  98. Kravchenko Ekaterina, Raza Muhammad, Besklubova Svetlana, Lazorenko Georgy (2025-07)
    Transforming Construction Waste into Resources for 3D Printed Concrete
  99. Liu Shan, Hao Yifei (2025-07)
    Designing Sprayable EGC from Constructability to Mechanical Performance
  100. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-07)
    Ultrasonic Pulse Velocity for Real-Time Filament Quality Monitoring in 3D Concrete Printing Construction
  101. Pemas Sotirios, Baliakas Dimitrios, Pechlivani Eleftheria, Stefanidou Maria (2025-07)
    Mechanical Properties of Bio-Printed Mortars with Bio-Additives for Green and Sustainable Construction
  102. Balina Karina, Gailitis Rihards, Šinka Māris, Argalis Pauls et al. (2025-07)
    Prospective LCA for 3D-Printed Foamed Geopolymer Composites Using Construction Waste as Additives
  103. Zafar Tayyab, Zafar Muhammad, Hojati Maryam (2025-07)
    Exploring the 3D Printability of Engineered Cementitious Composites with Internal Curing for Resilient Construction in Arid Regions
  104. Dragomir Mihai, Salem Tareq, Dragomir Diana, Hedjazi Lofti et al. (2025-07)
    Design Validation in Construction Project Management Using 3D Printing
  105. Chhabra Gulshan, Gupta Anjali, Bali Rajan, Tanwar Lovesh (2025-07)
    Advancing Sustainability in Construction:
    A Comprehensive Study on 3D-Printed Concrete Technologies
  106. Rojas Jorge, Hasanzadeh Sognad (2025-07)
    Human Factor in 3D Concrete Printing for Construction
  107. Raza Muhammad, Kravchenko Ekaterina, Besklubova Svetlana, Lazorenko Georgy et al. (2025-07)
    3D Printing of Recycled Materials for Sustainable Construction:
    A Comprehensive Economic and Life Cycle Assessment
  108. Flor-Unda Omar, Toapanta Carlos, Fuentes Mauricio, Rivera Mario (2025-07)
    Additive Manufacturing Technologies:
    Advances for the Construction Industry
  109. Alkhawaldeh Ayah, Alhassan Mohammad, Sawalha Ansam, Betoush Nour et al. (2025-06)
    Integration of 3D Printing and Machine Learning in Sustainable Construction:
    Feasibility and Challenges
  110. Keune Anna, Simšič Živa, Kloft Harald, Dörfler Kathrin (2025-06)
    AMC Edu:
    Lab Design to Learn About Additive Manufacturing in Construction
  111. Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-06)
    A Systematic Literature Review on the Thermal Behaviour of Building Elements Constructed Through 3D Concrete Printing (3DCP)
  112. Ma Jiayue, Samarasinghe Don, Rotimi James, Zou Kelvin (2025-06)
    A Review of Supply Chain Dynamics of 3D Concrete Printing Construction Practice
  113. Mansour Ali, Abou Khalil Amine, Khoury Hiam (2025-06)
    Toward Spatial and Cognitive Human-Robot Interaction:
    A Game-Based Simulation for Concrete 3D Printing in Construction
  114. García-Alvarado Rodrigo, García-Alvarado Rodrigo, Bunster Victor, Muñoz-Sanguinetti Claudia (2025-06)
    Additive Construction 4.0:
    A Systematic Review of 3D Concrete Printing for Construction 4.0
  115. Musathik A., Ashfak M., Arif M., Samaraweera B. et al. (2025-06)
    Towards Smart Construction:
    Development of an Automated Small Scale 3D Concrete Printer
  116. Tinoco Matheus, Toledo Filho Romildo, Mendoza Reales Oscar (2025-06)
    Rice Husk Bio-Aggregates for 3D Printing in Construction:
    Balancing Fresh and Hardened Properties
  117. Tinoco Matheus, Márquez Álvaro, Ramallo Laura, Barluenga Gonzalo et al. (2025-06)
    Fresh and Hardened Properties of Cellulose Fiber-Reinforced Mortars for 3D Printing in Construction
  118. Rosa Marco, Brito Diogo, Vilas-Boas Rodrigo, Sousa José (2025-06)
    3DCP vs Conventional Construction:
    Comparative Analysis of Energy Performance and Embodied Carbon
  119. Bhattacharjee Biswajoy, Sahu Prakash (2025-05)
    Recent Innovations and Implementations of 3D Printing in the Building and Construction Sector
  120. Aly Ahmed Aly, Mantawy Islam (2025-05)
    Additive Construction of Low Embodied Carbon Concrete:
    Geopolymer Concrete
  121. Hiremath Shivashankarayya, Mathapati Gururaj, Chiniwar Dundesh, Vishwanatha H. (2025-05)
    Performance Evaluation of Cementitious Composites by Designing an Extrusion System for Construction 3D Printing
  122. Bettermann Luca, Slepicka Martin, Esser Sebastian, Borrmann André (2025-05)
    Data-Driven Parameter Calibration in Additive Manufacturing for Construction:
    An Introduction to Learning by Printing
  123. Chippagiri Ravijanya, Lanjewar Bhagyashri, Kamath Muralidhar, Ralegaonkar Rahul (2025-05)
    Prediction of Construction Materials for Conventional and Alkali-Activated 3D Concrete Printing
  124. Niroumand Hamed, Bałachowski Lech (2025-05)
    Green Building with 3D Printed Earth Materials:
    Current Issues and Future Prospects of 3D Printed Green Houses for the Construction Sector
  125. Zhou Zhuang, Shi Xinyu, Zhou Haining, Liang Yuan et al. (2025-05)
    Research on 3DPC Construction Method for Structural High-Performance Component Generation
  126. Jaji Mustapha, Babafemi Adewumi, Zijl Gideon (2025-05)
    Mechanical Performance of Extrusion-Based Two-Part 3D-Printed Geopolymer Concrete:
    A Review of Advances in Laboratory and Real-Scale Construction Projects
  127. Casanova Euro, Hidalgo Nelson, Valdebenito Michael, Forcael Eric et al. (2025-04)
    Overturning Resistance of Concrete Curved Walls Manufactured with Additive Construction
  128. Hasani Alireza, Besharatian Boshra, Dorafshan Sattar (2025-04)
    Additively Constructed Plain Concrete Pipes:
    Structural Performance and Site Implementation
  129. Yue Hongzhe, Wang Qian, Zhao Zixuan, Lai Sha et al. (2025-04)
    Interactions Between BIM and Robotics:
    Towards Intelligent Construction Engineering and Management
  130. Berawi Mohammed, Sari Mustika, Bakri Helty, Miraj Perdana et al. (2025-04)
    3D Printing Technology for Precast Concrete:
    A Business Process Perspective from Indonesian Construction Sector
  131. Beigh Mirza, Signorini Cesare, Rauf Asim, Schröfl Christof et al. (2025-04)
    Intrinsic Rheological Behavior of Limestone Calcined Clay Cementitious (LC3) Binders for Automated Construction:
    Effect of Calcium Sulfate Varieties
  132. Temirzakuly Bakbergen, Nurgaliuly Dias, Kim J., Shehab Essam et al. (2025-04)
    Development of Cost-Effective Geopolymer Mortars from Low-Grade Metakaolin and Bottom Ash for 3D Construction Printing
  133. Thomsen Mette, Nicholas Paul, Chiujdea Ruxandra-Stefania, Nielsen Stine et al. (2025-04)
    Additive Manufacturing for Repair:
    Continual Construction Through Bio-Based Materials
  134. Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
    Optimizing 3D Geopolymer Concrete for Sustainable Construction:
    A Review of Material Selection, Printing Methods, and Properties
  135. Benros Deborah, Hashemi Arman, Yunsheng Su, Callaghan Carl (2025-04)
    Robotic Micro-House:
    Experience with 3D Concrete Printing for Housing Construction
  136. Pederson Federico, Ellersick Liam, Kim Heejeong (2025-04)
    A Review of Lunar Regolith Based Alkali Activated Materials and Sintered Regolith for Use as a Construction Material
  137. Zhang Yuying, Zhu Xiaohong, Li Muduo, Zhang Chao et al. (2025-04)
    3D Printing Technology in Concrete Construction
  138. İlcan Hüseyin, Külak Adnan, Şahin Oğuzhan, Aldemir Alper et al. (2025-04)
    Reinforcement and Modular System for 3DCP Geopolymer Structures Using Construction and Demolition Waste
  139. Liu Xiongfei, Yang Xiaojie, Sun Yuhang (2025-04)
    Synchronous Construction of Spray-Based 3D Printed Reinforced Concrete Structure:
    Effect of 2.5D Rebar Structure on the Flexural Performance of Slab
  140. Oladunni Oluwole, Lee Carman, Ibrahim Idowu, Olanrewaju Oludolapo (2025-03)
    Advances in Sustainable Additive Manufacturing:
    A Systematic Review for Construction Industry to Mitigate Greenhouse Gas Emissions
  141. Latifiilkhechi Leva, Aminbakhsh Saman, Akcay Emre (2025-03)
    Investigating the Barriers to the Adoption of 3D Printing Technology in the Turkish Construction Industry
  142. Albrecht Sophie, Hellerbrand Stefan, Weininger Florian, Thiel Charlotte (2025-03)
    Possibilities for Reducing the Environmental Impact in the Construction Industry Using the Example of a 3D Printed Staircase
  143. Minde Pravin, Patil Jagruti (2025-03)
    A Comprehensive Review of Factors Affecting 3D Printing Technology Adaptation in the Indian Construction Sector
  144. Miri Zahra, Baaj Hassan, Polak Maria (2025-03)
    3D-Printed Concrete Bridges:
    Material, Design, Construction, and Reinforcement
  145. Gardan Julien, Hedjazi Lofti, Attajer Ali (2025-02)
    Additive Manufacturing in Construction:
    State of the Art and Emerging Trends in Civil Engineering
  146. Albrecht Sophie, Hellerbrand Stefan, Weininger Florian, Thiel Charlotte (2025-02)
    Strategies for Minimizing Environmental Impact in Construction:
    A Case Study of a Cementitious 3D Printed Lost Formwork for a Staircase
  147. Manny Agemar, Dehn Frank (2025-02)
    Basics of 3D Printing in Concrete Construction:
    Recommendations for Practice
  148. Fediuk Roman, Amran Mugahed, Pavlík Zbyšek (2025-02)
    Editorial:
    Special Issues for “Emerging Materials for 3D Printing in Construction”
  149. Arash Motalebi, Mohammad Aba, Golam Kabir (2025-01)
    Assessing the Environmental Impact of Building Houses in Remote Areas:
    3D Printing vs. Traditional Construction Techniques
  150. Sangiorgio Valentino, Floris Ignazio, Duran Dayan (2025-01)
    Unified Integration Approach for Bridging BIM Model to 3D Construction Printing and Scale Prototyping
  151. Zargar Seyed, Leicht Robert, Wagner Alan, Duarte José et al. (2025-01)
    Beyond Trial and Error:
    Toward Construction-Aware Early Design-Optimization Considering Robotic Capabilities
  152. Lolli Francesca, Mehlomakulu Bungane, Monkman Sean (2025-01)
    Case Study of 3D Printed Concrete as Compared to Conventional Construction:
    Structural Comparison and Life Cycle Carbon Assessment
  153. Hassan Amer, Alomayri Thamer, Noaman Mohammed, Zhang Chunwei (2025-01)
    3D Printed Concrete for Sustainable Construction:
    A Review of Mechanical Properties and Environmental Impact
  154. Li Chao, Petzold Frank (2025-01)
    Ontology-Driven Mixture-of-Domain Documentation:
    A Backbone Approach Enabling Question Answering for Additive Construction
  155. Schossler Rodrigo, Ullah Shafi, Alajlan Zaid, Yu Xiong (2025-01)
    Data-Driven Analysis in 3D Concrete Printing:
    Predicting and Optimizing Construction Mixtures
  156. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2024-12)
    From Local Earth to Modern Structures:
    A Critical Review of 3D Printed Cement Composites for Sustainable and Efficient Construction
  157. Tarhan Yeşim, Tarhan İsmail, Şahin Remzi (2024-12)
    Comprehensive Review of Binder Matrices in 3D Printing Construction:
    Rheological Perspectives
  158. Aziz Saqib, Alexander Bradley, Gengnagel Christoph, Loutfi Jamila (2024-12)
    Minimal Mineral ‑ Rethinking Ceiling Systems:
    Shaping the Future of Sustainable Construction
  159. Ali Md., Abilgaziyev Anuar, Temirzakuly Bakbergen, Kurokawa Syuhei (2024-12)
    Development of a Novel 3D Construction Printer for Consistent Buildability of Novel Geopolymer Mortar and Its Challenges
  160. Irshidat Mohammad, Cabibihan John-John, Fadli Fodil, Ramahi Siraj et al. (2024-12)
    Waste Materials Utilization in 3D Printable Concrete for Sustainable Construction Applications:
    A Review
  161. Srivastava Manu, Walker Ian (2024-12)
    Continuum Soft Robots with Applications in the Construction Industry
  162. Nunes Lavynia, Miranda Freitas Juan Oliveira, Abud Vilanova João, Rubin Ariane (2024-12)
    Comparative Analysis of the Construction Feasibility of Special Works of Art Using 3D Concrete Printing, Prefabricated Concrete, and Cast In-Situ
  163. Forcael Eric, Medina Moisés, Opazo-Vega Alexander, Moreno Francisco et al. (2024-11)
    Additive Manufacturing in the Construction Industry
  164. Medvedev Vyacheslav, Pustovgar Andrey, Adamtsevich Aleksey, Adamtsevich Liubov et al. (2024-11)
    Improving Inter-Layer Adhesion of Cementitious Materials for 3D Construction Printing
  165. Raza Muhammad, Besklubova Svetlana, Zhong Ray (2024-11)
    Comparative Environmental Value-Stream-Assessment of Off-Site and On-Site 3D Construction Printing Processes
  166. Wang Lingyu, Zhang Yu, Wang Zhiyong, Chen Juan et al. (2024-11)
    Additive Manufacturing in Construction Using Unmanned Aerial Vehicle:
    Design, Implementation, and Material-Properties
  167. Heinze Lisa, Liebringshausen Anne, Eversmann Philipp (2024-11)
    3D Printing with Wood Waste:
    Development of Reusable Printing Material Based on Waste Wood Particles and Its Digital Manufacturing Process for Wall Constructions in Architecture
  168. Vasey Lauren, Chadha Kunaljit, Kango Ananya, Leung Victor et al. (2024-11)
    Impact Printing:
    A Novel Robotic Additive Manufacturing Method for Circular, High-Volume Construction
  169. Demont Léo, Bono Victor, Ducoulombier Nicolas, Mesnil Romain et al. (2024-11)
    Anisotropic Concrete:
    A Composite Look on the Engineering and Architecture of Concrete Construction
  170. Qian Sen, Li Changqi, Zhao Zeyap, Zi Bin (2024-11)
    Modeling and Experimental Validation of a Cable-Driven Robot for Three-Dimensional Printing Construction
  171. Günzel F., Moelich Gerrit, Kanyenze Simba, Kruger Jacques et al. (2024-11)
    Investigating Inherent Cement Setting Mechanisms to Improve the Constructability Performance of Extrusion-Based 3D Concrete Printing
  172. Dams Barrie, Chen Binling, Kaya Yusuf, Shepherd Paul et al. (2024-11)
    The Rise of Aerial Additive Manufacturing in Construction:
    A Review of Material Advancements
  173. Iuorio Ornella (2024-11)
    Additive Manufacturing and Automation in Construction
  174. Bartaky Markus, Gosch Lukas, Stavric Milena (2024-11)
    Sustainable Temporary Housing:
    An Evaluation-Framework for Large-Scale 3D Printer for Adobe Construction in Challenging Environments
  175. Takva Çağatay, Top Semahat, Gökgöz Berru, Gebel Şeyma et al. (2024-11)
    Applicability of 3D Concrete Printing Technology in Building Construction with Different Architectural Design Decisions in Housing
  176. Lucas Sandra (2024-11)
    From 3D to 5D Printing:
    Additive Manufacturing of Functional Construction Materials
  177. Jesus Manuel, Ribeiro Elis, Teixeira João, Rangel Bárbara et al. (2024-11)
    3D Printed Mortars with Marble-Powder Towards Sustainable Construction
  178. Carvalho João, Figueiredo Bruno, Cruz Paulo (2024-11)
    Ceramic AM and Beyond:
    The Potential of Hybrid Construction Systems
  179. Thomsen Mette, Tamke Martin, Rossi Gabriella, Chiujdea Ruxandra-Stefania et al. (2024-11)
    Sustainable Construction:
    Additive Manufacturing in a Circular Design Framework
  180. Murali Gunasekaran, Leong Sing (2024-11)
    Waste-Driven Construction:
    A State of the Art Review on the Integration of Waste in 3D Printed Concrete in Recent Researches for Sustainable Development
  181. Mackin Anthony, Hanoun Zaid, Migliorino Jenna, Ahmed Aly et al. (2024-10)
    Multi-Functional Additively Constructed Honeycomb Walls for Housing and Sheltering
  182. Motalebi Arash, Khondoker Mohammad, Kabir Golam (2024-10)
    Sustainable Structures Unveiled:
    Navigating the Environmental Landscape of 3D Printing in Construction
  183. Eid Zainab, Almerbati Nehal (2024-10)
    Methodologies to Assess the Environmental Impact of 3D Printed Buildings Using Construction Waste
  184. Wagner Juliana, Silveira Marcos, Vanderlei Romel, Das Sreekanta (2024-10)
    Comparative Analysis of Mold-Cast and 3D Printed Cement-Based Components:
    Implications for Standardization in Additive Construction
  185. Nakanishi Reina, Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki et al. (2024-10)
    Design and Development of a Shape Measurement System for 3D Construction Printing with a Manipulator
  186. Josa Irene, Fuente Albert (2024-10)
    Traditional and Modern Methods of Construction:
    Comparative Study of the Sustainability of Single‐Family Homes
  187. Florenzano Daniele, Sumini Valentina, Naboni Roberto (2024-10)
    Automated Design and Additive Construction of Regolith-Shielded Lunar Habitats
  188. Jin Peng, Hasany Masoud, Kohestanian Mohammad, Mehrali Mehdi (2024-10)
    Micro/Nano Additives in 3D Printing Concrete:
    Opportunities, Challenges, and Potential Outlook in Construction Applications
  189. Raza Muhammad, Zhong Ray (2024-10)
    Integration of Additive Manufacturing, Lean and Green Construction:
    A Conceptual Framework
  190. Gholami Shayan, Kim Yong-Rak, Salehi Faezeh (2024-10)
    Strengthening and 3D Printing of Magnesium-Silicate-Hydrate Binder for Martian Construction
  191. Li Shuai, Lan Tian, Nguyen Hung-Xuan, Tran Jonathan (2024-10)
    Frontiers in Construction 3D Printing:
    Self-Monitoring, Multi-Robot, Drone-Assisted Processes
  192. Madrid Javier, Ortega Guillermo, Olsson Nils, Tenorio Ríos José (2024-10)
    3D Constructing:
    Exploring the Potential of 3D Concrete and Clay Printing with Generative Design for Architectural Innovation
  193. Slepicka Martin, Borrmann André (2024-09)
    Fabrication Information Modeling for Closed-Loop Design and Quality Improvement in Additive Manufacturing for Construction
  194. Samrani Phebe, Cao Yifang, Fimbres-Weihs Gustavo, Sanjaya Eric et al. (2024-09)
    Effect of Fly-Ash and Ground Waste Glass as Cement Replacement in Concrete 3D Printing for Sustainable Construction
  195. Asaf Ofer, Bentur Arnon, Amir Oded, Larianovsky Pavel et al. (2024-09)
    A 3D Printing Platform for Design and Manufacturing of Multi-Functional Cementitious Construction Components and Its Validation for a Post-Tensioned Beam
  196. Curth Alexander, Pearl Natalie, Wissemann Emily, Cousin Tim et al. (2024-09)
    EarthWorks:
    Zero-Waste 3D Printed Earthen Formwork for Shape-Optimized, Reinforced Concrete Construction
  197. Dörfler Kathrin, Dielemans Gido, Leutenegger Stefan, Jenny Ercan et al. (2024-09)
    Advancing Construction in Existing Contexts:
    Prospects and Barriers of 3D Printing with Mobile Robots for Building Maintenance and Repair
  198. Brodmann Anton, Damtsas Efstathios, Schult Christoph, Spaeth Benjamin et al. (2024-09)
    DesignBuild Project of a 3D Printed Concrete Shell with a Segmented and Stereotomic Construction Concept
  199. Walzer Alexander, Kozlova Mariia, Yeomans Julian (2024-09)
    Printing Homes:
    Unit Cost Estimation for Additive Manufacturing in Construction
  200. Tanaka Shunsei, Usui Tatsuya, Koga Yoshitaka, Miyamoto Shingo et al. (2024-09)
    Experimental Study of Tunnel Invert Construction Using 3D Concrete Printing
  201. Krakovská Ema, Briels David, Straßer Alexander, Kränkel Thomas et al. (2024-09)
    Functionally Hybridised Lightweight Concrete Components:
    Monolithic Building Construction Using Selective Paste-Intrusion
  202. Jongvisuttisun Passarin, Chaiyapoom Phattarakamon, Jiramarootapong Patiphat, Meemuk Kornravee et al. (2024-09)
    The Second 3D Printed Prefabricated Prefinished Volumetric Construction Building in Thailand:
    A New Sustainable and Efficient Approach for a Low-Rise Prefab Modular Building
  203. Johnson Carol, Jordan Joseph, Kreiger Eric, Kreiger Megan (2024-09)
    Blast Response of Additively Constructed Concrete
  204. Bhattacherjee Shantanu, Jain Smrati, Pratapa Phanisri, Santhanam Manu et al. (2024-09)
    Construction of Boundary Wall for an International Cricket Stadium in India:
    A Case Study
  205. Tudela Marcell, Cardenas Palomino Kelssy, Bienvenu Sophie, Dunkelberg Federico et al. (2024-09)
    Development and Characterization of a Printable Concrete Made with Construction and Demolition-Waste-Aggregates
  206. Migliorino Jenna, Ahmed Aly, Mackin Anthony, Hanoun Zaid et al. (2024-09)
    Topology-Optimization-Based Additive Construction for Sustainability
  207. Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
    Determination of Print Speed Based on the Fresh Mechanical Strength over Time of Additively Constructed Concrete by Unconfined Compression
  208. Mackin Anthony, Migliorino Jenna, Farhoud Hamdy, Mantawy Islam (2024-09)
    Is Additive Construction Ready for Seismic Regions?:
    A New Seismic Protective System Enabled by Additive Construction
  209. Lehr Leonard, Pfeiffer Sven, Rasanani Mahdieh, Stephan Dietmar et al. (2024-09)
    3D Light on Site:
    Bringing Concrete Print to the Construction Site
  210. Neef Tobias, Görtzen Tom, Niemeyer Alice, Mechtcherine Viktor (2024-09)
    Investigation of Digitally Produced, Interlocking Concrete Blocks for a Modular Slab Construction
  211. Lin Xiqiang, Huo Liang, Li Guoyou, Wang Hailong et al. (2024-09)
    On-Site Deployment of 3D Construction Printing for the Building a Two-Story Building in China
  212. Kreiger Eric, Kreiger Megan, MacAllister Bruce, Wood Tanner et al. (2024-09)
    The Use of Additive Construction in All Structural Components of a Building
  213. Hlaváček Petr, Wolf Christoph, Robens-Radermacher Annika, Kühne Hans-Carsten (2024-09)
    Powder-Bed 3D Printing of Cementitious Materials for Lightweight Construction Elements
  214. Jacquet Yohan, Spangenberg Jon, Perrot Arnaud (2024-09)
    Exploring Viscosity and Friction Through Temperature:
    Understanding Self-Heating Dynamics of Non-Newtonian 3D Printable Construction Materials via CFD Modeling
  215. Kul Anil, Kocaer Öznur, Lucas Sandra (2024-09)
    Anisotropic Characteristics of 3D Printed Geopolymer Mortars from End-of-Life Materials of Construction Industry
  216. Nana W., Dell’Endice Alessandro, Bhooshan Vishu, Zhou Fulei et al. (2024-09)
    Decarbonizing Concrete Construction:
    Case of the Phoenix 3D Printed Footbridge and Learnings for Engineering and Architecture
  217. Diggs-McGee Brandy, Kreiger Megan, Kreiger Eric, Negron-McFarlane Christian (2024-09)
    Case Study on the Use of Thermographic Analysis to Evaluate an Additively Constructed Building
  218. Jacquet Yohan, Maierdan Yierfan, Kawashima Shiho, Perrot Arnaud (2024-09)
    Stability-Prediction of 3D Printable Fresh Construction Materials by Analyzing Thixotropic Compressive Properties Using Extensional Dynamic Mechanical Analysis
  219. Rycke Klaas, Bourriche Meriem, Daffner Tim (2024-09)
    Construction in the Modern Era
  220. Foiles Dreycen, Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
    The Effect of Coarse/Fine Aggregate Ratios on the Properties of Additively Constructed Concrete
  221. Khan Mehran, McNally Ciaran (2024-09)
    A Review of Developments in Low-Carbon 3D Printed Concrete in Europe:
    Steps Towards Sustainable Construction
  222. Sun Xiaoyan, Lin Xiqiang, He Huanan, Yang Hongyang et al. (2024-09)
    Steel Reinforced 3D Printing Concrete Housing Building and Its Modular Assembly Construction
  223. Wüchner Roland, Warnakulasuriya Suneth, Asl Reza, Bletzinger Kai-Uwe et al. (2024-09)
    Free-Form Structural Optimization for Additive Manufacturing in Construction
  224. Kariouh Anass, Popescu Mariana (2024-09)
    Reusable Flexible Formworks for Constructing Complex Concrete Structures
  225. Jenny David, Gramazio Fabio, Kohler Matthias (2024-09)
    Reimagining Earthen Materials:
    The New Era of Sustainable and Digital Construction
  226. Feringa Jelle (2024-09)
    Scalable Equals Sustainable:
    The New Era of Sustainable and Digital Construction
  227. Lloret-Fritschi Ena, Jenny Ercan, Jenny David (2024-09)
    A New Future of Construction:
    Digital Fabrication and Sustainability
  228. Jenny Ercan, Gawel Abel (2024-09)
    Sustainable Construction Through On‐Site Robotic Fabrication:
    Past and Future Concepts
  229. Kreiger Megan, Kreiger Eric, Mansour Stephan, Monkman Sean et al. (2024-09)
    Additive Construction in Practice:
    Realities of Acceptance Criteria
  230. Hou Shaodan, Wu Wenbo, Duan Zhenhua, Zhou Shuai et al. (2024-09)
    Rheology of Fiber-Reinforced Mortar for 3D Printing Construction:
    Effect of Recycled Hybrid-Powder and Polyethylene-Fiber
  231. Priyadarshani Suchi, Rao Roshan, Mani Monto (2024-08)
    Paradigm Shifts in Building Construction Priorities in the Last Decade
  232. Bodea Serban, Dell’Endice Alessandro, Aloutsanidis Vasilis, Bürgin Theophil et al. (2024-08)
    Phoenix 3D Concrete-Printed Bridge:
    Falsework System and Construction Process Development
  233. Alotaibi Badr, Ibrahim Shema Abdulsalam, Umar Ibrahim Abdullahi, Awad Abuhussain Mohammed et al. (2024-08)
    Assimilation of 3D Printing, Artificial Intelligence and Internet of Things for the Construction of Eco-Friendly Intelligent Homes:
    An Explorative Review
  234. Abbasnejad Behzad, Soltani Sahar, Karamoozian Amirhossein, Gu Ning (2024-08)
    A Systematic Literature Review on the Integration of Industry 4.0 Technologies in Sustainability Improvement of Transportation Construction Projects:
    State of the Art and Future Directions
  235. Soto Rubio Mauricio, Mirza Muhammad, Kagdi Mustafa, Bisati Ahmad (2024-08)
    Examining the Role of Concrete 3D Printing for Housing Construction on Indigenous Reserves in Canada
  236. Dahlenburg Maximilian, Tan Yuan, Li Mengxue, Ajmal Moshin et al. (2024-08)
    A Flexible and Efficient Calibration Method for Discrete Element Simulations of Additive Manufacturing in Construction
  237. Aghaee Kamran, Li Linfei, Roshan Alireza, Namakiaraghi Parsa (2024-08)
    Additive Manufacturing Evolution in Construction:
    From Individual Terrestrial to Collective, Aerial, and Extraterrestrial Applications
  238. Ahmed Salma, Romdhane Lotfi, Sayegh Sameh, Manjikian Solair (2024-08)
    Risk-Assessment for 3D Printing in Construction Projects
  239. Sovetova Meruyert, Calautit John (2024-07)
    Design, Calibration and Performance Evaluation of a Small-Scale 3D Printer for Accelerating Research in Additive Manufacturing in Construction
  240. Baghi Ali, Aminpour Nima, Memari Ali, Bilén Sven et al. (2024-07)
    3D Concrete Printing of Self-Supported Filaments via Entrained Cables:
    Constructing Formwork-Free Spanning Structures
  241. Aabbas Mohamed, Mahdaoui Mustapha, Ahachad Mohammed, Mazian Brahim et al. (2024-07)
    Advancing Sustainable Construction:
    Terracotta Component Development Through Extrusion-Based 3D Printing with Local Clay
  242. Lin Xiqiang, Wang Hailong, Sun Xiaoyan, Kikhia Wael et al. (2024-07)
    Construction Technology of the Curved Mars House Digital Hotel Project in China Using Concrete 3D Printing
  243. Mozaffari Salma, Kamravafar Rahasadat, Li Yunyan, Mata-Falcón Jaime et al. (2024-07)
    Leveraging Clay-Formwork 3D Printing for Reinforced-Concrete Construction
  244. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2024-07)
    Granular Materials for 3D Printing of Construction Components and Structures
  245. Pasupathy Kirubajiny, Ramakrishnan Sayanthan, Mechtcherine Viktor, Sanjayan Jay (2024-07)
    Alkali-Activated Waste Glass-Based Geopolymer Concrete for Digital Construction
  246. Shin Eun, Carcassi Olga, Maierdan Yierfan, Kawashima Shiho et al. (2024-07)
    Developing 3D Printed Natural Fiber-Rich Earth Materials in Construction
  247. Tay Yi, Wang Lining, Wang Xiangyu, Quah Tan et al. (2024-07)
    Integration of Functional Materials into 3D Printing for Construction
  248. Sovetova Meruyert, Calautit John (2024-07)
    Influence of Printing Parameters on the Thermal Properties of 3D Printed Construction Structures
  249. Raza Muhammad, Besklubova Svetlana, Zhong Ray (2024-07)
    Economic Analysis of Offsite and Onsite 3D Construction Printing Techniques for Low-Story Buildings:
    A Comparative Value-Stream-Assessment
  250. Li Xinyi, Gao Yuyue, Zhou Yan, Han Wenbin et al. (2024-07)
    A Review on Design and Construction of the Lunar Launch/Landing Infrastructure
  251. Wang Tingpeng, Mao Chao, Sun Bing, Li Zhiqiang (2024-07)
    Genealogy of Construction Robotics
  252. Salaimanimagudam M., Jayaprakash Jaganathan (2024-07)
    Selection of Digital Fabrication Technique in the Construction Industry:
    A Multi-Criteria Decision-Making Approach
  253. Kamra Juhi, Mani Ambica, Tripathi V. (2024-06)
    3D Printing:
    A Boon or a Bane for Sustainable Construction
  254. Villiers Wibke, Mwongo Mwiti, Babafemi Adewumi, Zijl Gideon (2024-06)
    Quantifying Recycled Construction and Demolition Waste for Use in 3D Printed Concrete
  255. Krishna R., Rehman Asif, Mishra Jyotirmoy, Saha Suman et al. (2024-06)
    Additive Manufacturing of Geopolymer Composites for Sustainable Construction:
    Critical Factors, Advancements, Challenges, and Future Directions
  256. Giwa Ilerioluwa, Dempsey Mary, Fiske Michael, Kazemian Ali (2024-06)
    3D Printed Sulfur-Regolith Concrete Performance Evaluation for Waterless Extraterrestrial Robotic Construction
  257. Hasani Alireza, Dorafshan Sattar (2024-06)
    Transforming Construction?:
    Evaluation of the State of Structural 3D Concrete Printing in Research and Practice
  258. Muy Yeakleang, Courard Luc, Garnavault Xavier, Bulteel David et al. (2024-06)
    Mechanical Properties and Freezing and Thawing Behavior of 3D Printing Concrete Containing Recycled Fine Aggregates from Construction and Demolition Waste
  259. Konoplianyk Alexander, Sopilnyak Artem, Sirenok Kyrylo, Sereda Svitlana et al. (2024-06)
    Constituent Components of 3D Printing in Construction:
    Mixture, Reinforcement and Their Main Characteristics
  260. Besklubova Svetlana, Raza Muhammad, Zhong Ray, Skibniewski Mirosław (2024-06)
    3D Printing vs. Traditional Construction:
    Cost Comparisons from Design to Waste Disposal Stages
  261. Basha Shaik, Nugraha Joshua, Rehman Atta, Choi Kichang et al. (2024-06)
    Structuration and Yield Strength Characterization of Hybrid Alkali-Activated Cement Composites for Ultra-Rapid 3D Construction Printing
  262. Balkhy Wassim, Valera Elias, Karmaoui Dorra, Lafhaj Zoubeir et al. (2024-06)
    Motives and Barriers for Offsite and Onsite Construction 3D Printing
  263. Espinosa Simon, Slepicka Martin, Borrmann André (2024-06)
    Integration of Laser Profiler Feedback into FIM for Additive Manufacturing in Construction
  264. Berawi Mohammed, Sari Mustika, Oktaviani Astiti, Miraj Perdana et al. (2024-05)
    Impact of BIM and 3D Printing Technologies on Production Process and Productivity of Pre-Cast Concrete in Construction Project
  265. Los Angeles Ortega Rosario Maria, Medina Melany, Duque Rafael, Alberto Jaén Ortega Antonio et al. (2024-05)
    Advancing Sustainable Construction:
    Insights into Clay-Based Additive Manufacturing for Architecture, Engineering, and Construction
  266. Mohamed Rania, Mohamed Abdelaziz (2024-05)
    Exploring the Environmental Benefits of 3D Printing Technology in Concrete Construction:
    A Review
  267. Khan Mehran, McNally Ciaran (2024-05)
    Recent Developments on Low-Carbon 3D Printing Concrete:
    Revolutionizing Construction Through Innovative Technology
  268. Jhun Jihye, Lee Dong-Hyun, Rehman Atta, Kang Seungwoo et al. (2024-05)
    Development of a Real-Time Geometric Quality Monitoring System for Extruded Filaments of 3D Concrete Printing Construction
  269. García-Alvarado Rodrigo, Soza-Ruiz Pedro, Moroni-Orellana Ginnia, Pedreros Fernando et al. (2024-05)
    From BIM-Model to 3D Construction Printing:
    A Framework Proposal
  270. Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wang Yufei et al. (2024-04)
    Artificial Intelligence Powered Real-Time Quality Monitoring for Additive Manufacturing in Construction
  271. Laghi Vittoria, Shakor Pshtiwan, Panda Biranchi, Gasparini Giada (2024-04)
    Editorial:
    Additive Manufacturing in Construction
  272. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-04)
    Concrete 3D Printing Technology for Sustainable Construction:
    A Review on Raw Material, Concrete Type and Performance
  273. Hassan Habibelrahman, Rodriguez-Ubinas Edwin, Tamimi Adil, Trepci Esra et al. (2024-04)
    Towards Innovative and Sustainable Buildings:
    A Comprehensive Review of 3D Printing in Construction
  274. Khan Mohammad, Dani Aflah, Lim James, Roy Krishanu (2024-04)
    Appraising the Feasibility of 3D Printing Construction in New Zealand Housing
  275. Peng Yiming, Unluer Cise (2024-04)
    Understanding the Rheological Behavior of Reactive Magnesia-Metakaolin System in the Context of Digital Construction
  276. Yu Haoxuan, Wen Bodong, Zahidi Izni, Chow Ming et al. (2024-04)
    Constructing the Future:
    Policy-Driven Digital Fabrication in China's Urban Development
  277. Curth Alexander, Alvarez Eduardo, Feickert Kiley, Mueller Caitlin et al. (2024-04)
    Multi-Material Fabrication for Low-Carbon Construction:
    An Optimised Floor System for Affordable Housing in Mexico
  278. Chadha Kunaljit, Vasey Lauren, Kango Ananya, Aejmelaeus-Lindström Johan et al. (2024-04)
    Impact Printed Structures:
    Design Systems and Construction Strategies
  279. Darweesh Barrak, Rael Ronald (2024-04)
    From Walls to Roofs:
    Formwork-Free Robotic Earthen Vault Construction
  280. Alhaidary Haidar (2024-03)
    Three-Dimensional Concrete Printing as a Construction-Automation-Strategy and Assessments from a Case Study Building
  281. Kiruthiga K., Raju K., Venkatakrishnaiah R. (2024-03)
    A Short Review of 3D Printing from Construction Perspective
  282. Damarla Ravikanth, Lakshmi Keshav (2024-03)
    A Review on Impact-Assessment of 3D Printing Technology in the Field of Modern Construction
  283. İlcan Hüseyin, Külak Adnan, Şahmaran Mustafa (2024-03)
    3D Printable Construction and Demolition Waste-Based Geopolymer:
    Investigating the Effects of Additives on Engineering Properties
  284. Giwa Ilerioluwa, Herbert Marc, Lamendola Joseph, Fiske Michael et al. (2024-03)
    Planetary Robotic Construction Using Large-Scale 3D Printing with Sulfur-Concrete
  285. Gappmeier Peter, Reichenbach Sara, Kromoser Benjamin (2024-03)
    Advances in Formwork Automation, Structure and Materials in Concrete Construction
  286. Soda Prabhath, Dwivedi Ashutosh, Sahana C., Gupta Souradeep (2024-03)
    Development of 3D Printable Stabilized Earth-Based Construction Materials Using Excavated Soil:
    Evaluation of Fresh and Hardened Properties
  287. Latorraca Tássia, Guimarães Ana, Rangel Bárbara (2024-03)
    Bibliometric Analysis of Personalized 3D Printed Concrete-Based Modules for Construction:
    Leveraging the Ordinatio Method
  288. Barjuei Erfan, Capitanelli Alessio, Bertolucci Riccardo, Courteille Eric et al. (2024-03)
    Digital Workflow for Printability Checking and Prefabrication in Robotic Construction 3D Printing Based on Artificial Intelligence Planning
  289. Kotov Evgeny, Nemova Darya, Sergeev Vitaly, Dontsova Anna et al. (2024-03)
    Thermal Performance-Assessment of Aerogel Application in Additive Construction of Energy-Efficient Buildings
  290. Souza Eduarda, Ribeiro Borges Paulo, Stengel Thorsten, Nematollahi Behzad et al. (2024-03)
    3D Printed Sustainable Low-Cost Materials for Construction of Affordable Social Housing in Brazil:
    Potential, Challenges, and Research Needs
  291. Sarı Ramazan, Çalışkan Ekrem (2024-03)
    Emerging Technologies in Building Construction
  292. Robayo-Salazar Rafael, Vargas Armando, Martínez Fabio, Gutiérrez Ruby (2024-02)
    Utilization of Powders and Fine Aggregates from the Recycling of Construction and Demolition Waste in the 3D Printing of Portland-Based Cementitious Materials
  293. Xiao Jianzhuang, Liu Haoran, Ding Tao, Yu Kequan et al. (2024-02)
    Rebar-Free Concrete Construction:
    Concept, Opportunities and Challenges
  294. Wu Dinglue, Luo Qiling, Long Wujian, Zhang Shunxian et al. (2024-02)
    Advancing Construction 3D Printing with Predictive Inter-Layer Bonding Strength:
    A Stacking Model Paradigm
  295. Wang Xiaonan, Li Wengui, Guo Yipu, Kashani Alireza et al. (2024-02)
    Concrete 3D Printing Technology in Sustainable Construction:
    A Review on Raw Materials, Concrete Types and Performances
  296. Moraes Maria, Nagata Ester, Duran Afonso, Rossignolo João (2024-02)
    Alkali-Activated Materials Applied in 3D Printing Construction:
    A Review
  297. Silva Guido, Quispe Axcel, Baldoceda Jordan, Kim Suyeon et al. (2024-02)
    Additive Construction of Concrete Deep Beams Using Low-Cost Characterization Methods and FEM-Based Topological Optimization
  298. Kakarla Akesh, Kong Ing, Patel Vipulkumar (2024-02)
    Additive Manufacturing for Building and Constructions
  299. Silva Maicon, Silva Lívia, Toralles Berenice, Cardoso Flávia et al. (2024-02)
    Building a Sustainable Future:
    The Role of Additive Manufacturing in Civil Construction
  300. Bhooshan Shajay, Dell’Endice Alessandro, Ranaudo Francesco, Mele Tom et al. (2024-02)
    Unreinforced Concrete Masonry for Circular Construction
  301. Isaac Geoff, Nicholas Paul, Paul Gavin, Pietroni Nico et al. (2024-02)
    Automated Shotcrete:
    A More Sustainable Construction Technology
  302. Yang Min, Li Chao, Liu Hao, Huo Longfei et al. (2024-02)
    Exploring the Potential for Carrying Capacity and Reusability of 3D Printed Concrete Bridges:
    Construction, Dismantlement, and Reconstruction of a Box Arch Bridge
  303. Rehman Atta, Kim Ik-Gyeom, Kim Jung-Hoon (2024-01)
    Towards Full Automation in 3D Concrete Printing Construction:
    Development of an Automated and In-Line Test-Method for In-Situ Assessment of Structural Build-Up and Quality of Concrete
  304. Vaněk Vojtěch, Chomová Štěpánka, Pěnčík Jan (2024-01)
    Additive Technologies in Construction:
    Shifting the Paradigm of Building
  305. Pal Biswajit, Chourasia Ajay, Kapoor Ashish (2024-01)
    Intricacies of Various Printing Parameters on Mechanical Behavior of Additively Constructed Concrete
  306. Chen Kailun, Liu Qiong, Chen Bing, Zhang Shishun et al. (2024-01)
    A Review on Effect of Raw Materials on the Performance of 3D Printed Geopolymer System for Construction
  307. Chadha Kunaljit, Dubor Alexandre, Cabay Edouard, Tayoun Yara et al. (2024-01)
    Additive Manufacturing for the Circular Built Environment:
    Towards Circular Construction with Earth-Based Materials
  308. Li Feng, Zhang Rongrong, Zhou Siqi, Zhu Xingyi (2023-12)
    Printability and Hardening Performance of Three-Dimensionally-Printed Geopolymer Based on Lunar Regolith Simulant for Automated Construction of Lunar Infrastructure
  309. Panda Biranchi, Shakor Pshtiwan, Lagaros Nikos (2023-12)
    Advanced Modelling for Additive Manufacturing in Construction
  310. Kalthoff Matthias, Cruz Cynthia, Raupach Michael, Matschei Thomas (2023-12)
    Material‐Minimized Construction with Extruded Textile-Reinforced Concrete
  311. Teng Fei, Li Mingyang, Zhang Dong, Li Heng et al. (2023-11)
    BIM-Enabled Collaborative-Robots 3D Concrete Printing to Construct MiC with Reinforcement
  312. Wang Qiang-Chen, Yu Si-Nan, Chen Zi-Xiao, Weng Yiwei et al. (2023-11)
    Promoting Additive Construction in Fast-Developing Areas:
    A Q-Methodology-Analysis of Stakeholder-Perspectives on Policy-Mixes
  313. Zavaleta Diana, Ñañez Robert, Silva Guido, Ruiz Gaby et al. (2023-11)
    Additive Construction Using Enhanced Earthen-Based Composites:
    Improvement of the Mechanical Strength and Water Durability Using Chitosan and Agave-Fibers
  314. Koneswaran Bahirathan, Rajeev Pathmanathan, Sanjayan Jay (2023-11)
    Development of a Prototype Concept for Using 3D Concrete Printing in Pavement Construction
  315. Khan Mehran, McNally Ciaran (2023-11)
    A Holistic Review on the Contribution of Civil Engineers for Driving Sustainable Concrete Construction in the Built Environment
  316. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Youcef-Toumi Kamal et al. (2023-11)
    Adaptive Estimation and Detection of Filament-Width-Deviation During 3D Robotic Printing of Construction Materials
  317. Zhi Peng, Wu Yuching, Rabczuk Timon (2023-11)
    Effects of Time-Varying Liquid Bridge Forces on Rheological Properties, and Resulting Extrudability and Constructability of Three-Dimensional Printing Mortar
  318. Coniglo Alfonso, Palmiotta Annarota, Amato Michele, Gigliotti Rosario (2023-11)
    Earth-3D Printing for Non-Structural Elements of Modular Steel Buildings:
    Proposal for an Innovative and Sustainable Construction System
  319. Sangiorgio Valentino, Parisi Fabio, Graziano Angelo, Tina Giosmary et al. (2023-11)
    3D Printing of Viscous Materials in Construction:
    New Design Paradigm, from Small Components to Entire Structures
  320. Naboni Roberto, Zomparelli Alessandro, Kunic Anja, Breseghello Luca (2023-11)
    Design, Robotic Fabrication and Augmented Construction of Low-Carbon Concrete Slabs Through Field-Based Reaction-Diffusion
  321. Eversmann Philipp, Rossi Andrea (2023-11)
    Towards Construction 4.0:
    Computational Circular Design and Additive Manufacturing for Architecture Through Robotic Fabrication with Sustainable Materials and Open-Source Tools
  322. Zhao Zengfeng, Ji Chenyuan, Xiao Jianzhuang, Yao Lei et al. (2023-11)
    A Critical Review on Reducing the Environmental Impact of 3D Printing Concrete:
    Material-Preparation, Construction-Process and Structure-Level
  323. Friese Danny, Hahn Lars, Le Xuan Hung, Mersch Johannes et al. (2023-10)
    Robot-Assisted Manufacturing Technology for 3D Non-Metallic Reinforcement Structures in the Construction Applications
  324. Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2023-10)
    Geopolymer Mortars for Use in Construction 3D Printing:
    Effect of LSS, Graphene-Oxide and Nano-Clay at Different Environmental Conditions
  325. Christ Julian, Leusnik Sander, Koss Holger (2023-10)
    Multi-Axial 3D Printing of Biopolymer-Based Concrete Composites in Construction
  326. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2023-10)
    From Soil to Printed Structures:
    A Systematic Approach to Designing Clay-Based Materials for 3D Printing in Construction and Architecture
  327. Dörrie Robin, David Martin, Freund Niklas, Lowke Dirk et al. (2023-10)
    In-Process Integration of Reinforcement for Construction Elements During Shotcrete 3D Printing
  328. Rothe Tom, Hühne Christian, Gantner Stefan, Hack Norman (2023-10)
    Dynamic Winding Process of Individualized Fiber-Reinforcement Structures for Additive Manufacturing in Construction
  329. Perez-Rivera Anthony, Kreiger Eric, Stidwell Samuel, Stynoski Peter et al. (2023-10)
    Finite-Element Modeling of Reinforced Additively Constructed Concrete Structures
  330. Singh Amardeep, Wang Yufei, Zhou Yiyi, Sun Junbo et al. (2023-10)
    Utilization of Antimony-Tailings in Fiber-Reinforced 3D Printed Concrete:
    A Sustainable Approach for Construction Materials
  331. Ebadi-Jamkhaneh Mehdi, Kontoni Denise-Penelope, Ebrahimi Amir (2023-10)
    Three-Dimensional Printing of Structural Members with Shotcrete Technique:
    Design, Construction, and Future Directions
  332. Genc Gokhan, Demircan Ruya, Beyhan Figen, Kaplan Gökhan (2023-10)
    Assessment of the Sustainability and Producibility of Adobe-Constructions Reinforced with Ca-Based Binders:
    Environmental Life-Cycle-Analysis and 3D Printability
  333. Akman Arabella, Sadhu Ayan (2023-10)
    Recent Development of 3D Printing Technology in Construction Engineering
  334. Mallikarjuna Balichakra, Hareeswar M., Sharath P. (2023-09)
    Applications of Additive Manufacturing in Construction and Building Industries
  335. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2023-09)
    Automatic Detection and Isolation of Filament-Width-Deviation During 3D Printing of Recycled Construction-Material
  336. Beckers Jakob, Kalthoff Matthias, Cruz Cynthia, Matschei Thomas (2023-09)
    Possibilities of Extrusion-Production in Concrete Construction
  337. Wu Huanyu, Liu Yongqi, Chang Ruidong, Wu Lingyi (2023-09)
    Research Status Quo and Trends of Construction Robotics:
    A Bibliometric Analysis
  338. Meng Qingcheng, Hu Lei, Li Mingjian, Qi Xin (2023-09)
    Assessing the Environmental Impact of Building Life Cycle:
    A Carbon-Reduction-Strategy Through Innovative Design, Intelligent Construction, and Secondary Utilization
  339. Yin Xunzhi, Guo Chong, Sun Bo, Chen Honggang et al. (2023-09)
    The State of the Art in Digital Construction of Clay Buildings:
    Reviews of Existing Practices and Recommendations for Future Development
  340. Bong Shin, Nematollahi Behzad, Mechtcherine Viktor, Li Victor et al. (2023-09)
    3D Printed Engineered, Strain-Hardening Geopolymer Composite as Permanent Formwork for Construction of Reinforced Concrete Beam
  341. Mohsen Mohamed, Diseet Malak, Aburumman Mervat, Taha Ramzi et al. (2023-09)
    3D Printed Clay Enhanced with Graphene-Nano-Platelets for Sustainable and Green Construction
  342. Rehman Atta, Perrot Arnaud, Birru Bizu, Kim Jung-Hoon (2023-09)
    Recommendations for Quality-Control in Industrial 3D Concrete Printing Construction with Mono-Component Concrete:
    A Critical Evaluation of Ten Test-Methods and the Introduction of the Performance-Index
  343. Otto Jens, Mischke Janik (2023-09)
    Operational and Occupational Safety When Using Automated Manufacturing Processes on Construction Sites:
    Consideration of Current Legal and Technical Framework Conditions
  344. Ye Junhong, Teng Fei, Yu Jie, Yu Shiwei et al. (2023-08)
    Development of 3D Printable Engineered Cementitious Composites with Incineration-Bottom-Ash for Sustainable and Digital Construction
  345. Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
    Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
    Effect of Operational- and Material-Oriented Parameters
  346. Lachmayer Lukas, Müller Nico, Herlyn Thilo, Raatz Annika (2023-08)
    Volume Flow-Based Process-Control for Robotic Additive Manufacturing-Processes in Construction
  347. Varela Hugo, Barluenga Gonzalo, Perrot Arnaud (2023-08)
    Nano-Modified Materials for New Construction Technologies:
    Self-Compacting and 3D Printing
  348. Tabassum Toiba, Ahmad Mir Ajaz (2023-08)
    A Review of 3D Printing Technology:
    The Future of Sustainable Construction
  349. Ramani Ayyagari, Chen Qian, Soto Borja (2023-08)
    Quantifying the Impact of Concrete 3D Printing on the Construction Supply Chain
  350. Lu Bing, Li Hongliang, Wong Teck, Qian Shunzhi (2023-08)
    Development of a Functional Cementitious Mixture with Expanded Graphite for Automated Spray Construction
  351. Chougan Mehdi, Kheetan Mazen, Ghaffar Seyed (2023-07)
    Additive Manufacturing and the Construction Industry
  352. Silva Guido, Burgos Valeria, Ñañez Robert, Kim Suyeon et al. (2023-07)
    Soil-Cement Matrices for Additive Construction:
    3D Printing System Validation and Printing Tests
  353. Almomani Mohammed, Ababneh Nedal, Abdalla Khairedin, Shbeeb Nadim et al. (2023-07)
    Selecting the Best 3D Concrete Printing Technology for Refugee Camp’s Shelter Construction Using Analytical Hierarchy Process:
    The Case of Syrian Refugees in Jordan
  354. Placzek Gerrit, Schwerdtner Patrick (2023-07)
    Concrete Additive Manufacturing in Construction:
    Integration Based on Component-Related Fabrication-Strategies
  355. Balkhy Wassim, Bing Scott, Babidi Saad, Lafhaj Zoubeir et al. (2023-07)
    The Analysis of Lean Wastes in Construction 3D Printing:
    A Case Study
  356. Mohiuddin Rafay, Cruz Policroniades Miranda, Slepicka Martin, Borrmann André (2023-07)
    Optical Process-Control for Extrusion-Based Additive Manufacturing-Methods in Construction
  357. Hu Rongbo, Pan Wen, Iturralde Kepa, Linner Thomas et al. (2023-07)
    Construction Automation and Robotics for Concrete Construction:
    Case Studies on Research, Development, and Innovations
  358. Núñez Varillas Christoper, Regalado Espinoza Marck, Gago Gamboa Angela (2023-07)
    3D Printing:
    An Opportunity for the Sustainable Development of Building Construction
  359. Bici Andjol, Yunitsyna Anna (2023-07)
    Analysis of 3D Printing Techniques for Building Construction:
    A Review
  360. Kazemian Ali, Giwa Ilerioluwa, Ekenel Mahmut (2023-06)
    Large-Scale Additive Manufacturing for Automated Construction:
    An Overview
  361. Alzarrad Ammar, Song Siyuan, Hatamleh Muhammad, Awolusi Ibukun et al. (2023-06)
    Guideline for Automated Construction of Reinforced Concrete Beams Using 3D Printing and BIM
  362. Martin Michael, Banijamali Kasra, Kazemian Ali (2023-06)
    Reality-Capture Technologies for Automated Quality-Control During Construction 3D Printing
  363. Mortada Youssef, Masad Eyad, Kogbara Reginald, Mansoor Bilal et al. (2023-06)
    Development of Ca(OH)2-Based Geopolymer for Additive Manufacturing Using Construction Wastes and Nano-Materials
  364. Jesus Manuel, Pessoa Ana Sofia, Guimarães Ana, Rangel Bárbara et al. (2023-06)
    A Reflection on Sustainable Opportunities for 3D Printing in Construction
  365. Cabibihan John-John, Gaballa Aya, Fadli Fodil, Irshidat Mohammad et al. (2023-06)
    A Guided Approach for Utilizing Concrete Robotic 3D Printing for the Architecture, Engineering, and Construction Industry
  366. Zhang Daobo, Feng Peng, Zhou Peizhao, Xu Weiguo et al. (2023-06)
    3D Printed Concrete Walls Reinforced with Flexible FRP Textile:
    Automatic Construction, Digital Rebuilding, and Seismic Performance
  367. Shenawa Amaal, Karoti Poonam (2023-06)
    3D Printing in Construction, Mixture Characteristics, Strength, and Thermal Performance-Review
  368. Joshi Arpan, Poullain Philippe, Craveiro Flávio, Bártolo Helena (2023-06)
    Earth as a Construction-Material for Sustainable 3D Printing:
    Rheological Aspect
  369. Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-06)
    A System-Development-Strategy of a Digital Construction for Building Frames
  370. Codarin Sara (2023-05)
    Enhancing the Workforce in Construction:
    Robotic Concrete Printing in Detroit
  371. Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-05)
    Off-Site Construction with 3D Concrete Printing
  372. Mogaji Iseoluwa, Mewomo Modupe, Toyin James (2023-05)
    Key Barriers to the Adoption of 3D Printing Innovation in Construction:
    A Review of Empirical Studies
  373. Sobek Werner, Schmeer Daniel (2023-05)
    Graded Concrete (2. Generation):
    The Combination of Hollow-Core Construction with Trajectory-Based Reinforcement
  374. Simioni Fernanda, Rangel Bárbara, Campos Nadine, Teixeira João (2023-04)
    3D Printing for Construction:
    A Systematic Review of Its Sustainability
  375. Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen, Mandhari Othman et al. (2023-04)
    3D Printing of Limestone-Calcined-Clay-Cement:
    A Review of Its Potential Implementation in the Construction-Industry
  376. Besklubova Svetlana, Tan Bing, Zhong Ray, Spicek Nikola (2023-04)
    Logistic-Cost-Analysis for 3D Printing Construction Projects Using a Multi-Stage Network-Based Approach
  377. Peav John, Hudson Ed, Summy Zachary, Violette Jon (2023-04)
    3D Concrete Printed Houses:
    Barriers to Adoption and Construction Practices
  378. Rekhi Jagruti, Stern Alaina (2023-04)
    3D Concrete Printed Construction:
    Building the Future of Housing, Layer-by-Layer
  379. Khan Shoukat, Jassim Muhammad, İlcan Hüseyin, Şahin Oğuzhan et al. (2023-04)
    3D Printing of Circular Materials:
    Comparative Environmental Analysis of Materials and Construction Techniques
  380. Fischer Oliver, Bos Freek (2023-04)
    Additive Manufacturing in Concrete Construction:
    Ways to Implement It in Engineering Practice
  381. Kazemian Ali, Seylabi Elnaz, Ekenel Mahmut (2023-03)
    Concrete 3D Printing:
    Challenges and Opportunities for the Construction Industry
  382. Ekanayaka Virama, Hürkamp André (2023-03)
    Implementation of a Surrogate-Model for a Novel Path‐Based Finite-Element-Simulation for Additive Manufacturing-Processes in Construction
  383. Fonseca Mariana, Matos Ana (2023-03)
    3D Construction Printing Standing for Sustainability and Circularity:
    Material-Level Opportunities
  384. Tahmasebinia Faham, Jabbari Amir, Skrzypkowski Krzysztof (2023-03)
    The Application of Finite Element Simulation and 3D Printing in Structural Design Within Construction Industry 4.0
  385. Quah Tan, Tay Yi, Lim Jian, Tan Ming et al. (2023-03)
    Concrete 3D Printing:
    Process-Parameters for Process-Control, Monitoring and Diagnosis in Automation and Construction
  386. Bajpayee Aayushi, Farahbakhsh Mehdi, Zakira Umme, Pandey Aditi et al. (2023-03)
    In-Situ Resource Utilization and Reconfiguration of Soils into Construction Materials for the Additive Manufacturing of Buildings
  387. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-03)
    Influence of Limestone-Calcined-Clay-Cement on Properties of 3D Printed Concrete for Sustainable Construction
  388. Geng Songyuan, Luo Qiling, Liu Kun, Li Yunchao et al. (2023-02)
    Research Status and Prospect of Machine Learning in Construction 3D Printing
  389. Rehman Atta, Melesse Birru, Kim Jung-Hoon (2023-02)
    Set-on-Demand 3D Concrete Printing Construction and Potential Outcome of Shotcrete-Accelerators on Its Hardened Properties
  390. Prasad Kudrekodlu, Vasugi V., Senthil Kumaran G. (2023-02)
    Application of 3D Printing Concepts in the Architecture Engineering and Construction Industry:
    A Scientometric Review
  391. Waqar Ahsan, Othman Idris, Pomares Juan (2023-02)
    Impact of 3D Printing on the Overall Project Success of Residential Construction Projects Using Structural Equation Modelling
  392. Beersaerts Glenn, Hertel Tobias, Lucas Sandra, Pontikes Yiannis (2023-02)
    Promoting the Use of Fe-Rich Slag in Construction:
    Development of a Hybrid Binder for 3D Printing
  393. Baigarina Akerke, Shehab Essam, Ali Md. (2023-02)
    Construction 3D Printing:
    A Critical Review and Future Research-Directions
  394. Pons-Valladares Oriol, Casanovas-Rubio Maria, Armengou Jaume, Fuente Albert (2023-02)
    Approach for Sustainability-Assessment for Footbridge Construction Technologies:
    Application to the First World D-Shape 3D Printed Fiber-Reinforced Mortar Footbridge in Madrid
  395. Tuvayanond Wiput, Prasittisopin Lapyote (2023-02)
    Design for Manufacture and Assembly of Digital Fabrication and Additive Manufacturing in Construction:
    A Review
  396. Parisi Fabio, Sangiorgio Valentino, Parisi Nicola, Mangini Agostino et al. (2023-01)
    A New Concept for Large Additive Manufacturing in Construction:
    Tower-Crane-Based 3D Printing Controlled by Deep-Reinforcement-Learning
  397. Vijayalaxmi Jeyasingh, Singh Parth (2023-01)
    Comparative Analysis of Concrete 3D Printing and Conventional Construction Technique for Housing
  398. Lootens Didier (2023-01)
    Giving Shape and Functionality to the Matter:
    Digital Construction
  399. Shanmugan S., Sandhyarani T., Palani Subbaiya (2022-12)
    Development of 3D Concrete Printing Using Additive Manufacturing Processes for Construction and Building Industry
  400. Zhao Shun, Wang Qiang, Fang Xinjun, Liang Wei et al. (2022-12)
    Application and Development of Autonomous Robots in Concrete Construction:
    Challenges and Opportunities
  401. Volpe Stelladriana, Sangiorgio Valentino, Fiorito Francesco, Varum Humberto (2022-12)
    Overview of 3D Construction Printing and Future Perspectives:
    A Review of Technology, Companies and Research Progression
  402. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Ozcelikci Emircan et al. (2022-12)
    Rheological Property and Extrudability Performance-Assessment of Construction and Demolition Waste-Based Geopolymer Mortars with Varied Testing Protocols
  403. Robayo-Salazar Rafael, Gutiérrez Ruby, Villaquirán-Caicedo Mónica, Delvasto Arjona Silvio (2022-12)
    3D Printing with Cementitious Materials:
    Challenges and Opportunities for the Construction Sector
  404. Placzek Gerrit, Schwerdtner Patrick (2022-12)
    A Preliminary Study of the Impact of Robotic Systems on Concrete 3D Printing in the Construction Industry
  405. Li Chao, Zahedi Ata, Petzold Frank (2022-11)
    Pragmatic Design Decision Support for Additive Construction Using Formal Knowledge and Its Prospects for Synergy with a Feedback Mechanism
  406. Lee Chang-Hwan, Gwak Kwan-Woong (2022-11)
    Design of a Novel Cable-Driven Parallel Robot for 3D Printing Building Construction
  407. Teixeira João, Schaefer Cecília, Rangel Bárbara, Maia Lino et al. (2022-11)
    A Road Map to Find in 3D Printing a New Design Plasticity for Construction:
    The State of Art
  408. Puzatova (nee Sharanova) Anastasiia, Shakor Pshtiwan, Laghi Vittoria, Dmitrieva Maria (2022-11)
    Large-Scale 3D Printing for Construction Application by Means of Robotic Arm and Gantry 3D Printer:
    A Review
  409. Rech Arianna, Chiujdea Ruxandra-Stefania, Colmo Claudia, Rossi Gabriella et al. (2022-11)
    Waste-Based Biopolymer-Slurry for 3D Printing Targeting Construction Elements
  410. Liu Kewei, Meng Qingfei, Kong Qingzhao, Zhang Xihong (2022-11)
    Review on the Developments of Structure, Construction Automation, and Monitoring of Intelligent Construction
  411. Salaimanimagudam M., Jayaprakash Jaganathan (2022-11)
    Optimum Selection of Reinforcement, Assembly, and Formwork System for Digital Fabrication Technique in Construction Industry:
    A Critical Review
  412. Tay Yi, Ting Guan, Panda Biranchi, Wong Teck et al. (2022-11)
    Towards Net-Zero in 3DP for Building & Construction
  413. Chandrasekar Ravekumar, Gkantou Michaela, Nikitas Georgios, Hashim Khalid et al. (2022-10)
    Integration of 3D Concrete Printing in the Construction Industry:
    A Short Review
  414. Hahlbrock David, Braun Michael, Heidel Robin, Lemmen Patrik et al. (2022-10)
    Cable Robotic 3D Printing:
    Additive Manufacturing on the Construction Site
  415. Patterson Albert, Vajipeyajula Bhaskar, Norris William (2022-10)
    System Architecture and Design Parameters for Extrusion-Based Autonomous Construction Systems
  416. Demiral Nazim, Ozkan Ekinci Mehmet, Şahin Oğuzhan, İlcan Hüseyin et al. (2022-10)
    Mechanical Anisotropy Evaluation and Bonding Properties of 3D Printable Construction and Demolition Waste-Based Geopolymer Mortars
  417. Diwan Anushree, Patel Shiv, Pal Ankit, Dwivedi Ashutosh et al. (2022-10)
    Flow Characteristics of Cement Mortar with Varied Silica-Fume for Additive Construction
  418. Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-09)
    Method of Formulating 3D Printable Strain-Hardening Alkali-Activated Composites for Additive Construction
  419. Mata-Falcón Jaime, Bischof Patrick, Huber Tobias, Anton Ana-Maria et al. (2022-09)
    Digitally Fabricated Ribbed Concrete Floor Slabs:
    A Sustainable Solution for Construction
  420. Ma Jiaming, Gomaa Mohamed, Bao Ding, Javan Anooshe et al. (2022-09)
    Print Nervi:
    Design and Construction of a Ribbed Floor System in the Digital Era
  421. Kloft Harald, Dörfler Kathrin, Bährens Meike, Dielemans Gido et al. (2022-09)
    The Research Infrastructure of the SFB TRR 277 AMC:
    Additive Manufacturing in Construction
  422. Solonina Valentina, Surovtsev I., Butakova M. (2022-09)
    Optimizing the Structure of Construction Mixes for 3D Printing
  423. Puzatova (nee Sharanova) Anastasiia, Sokolnikova S., Dmitrieva Maria (2022-09)
    Polymer-Cement Concrete Based on Polyvinyl-Acetate Dispersion for Construction 3D Printing
  424. Qian Hao, Hua Sudong, Yue Hongfei, Feng Guiyang et al. (2022-09)
    Utilization of Recycled Construction-Powder in 3D Concrete Printable Materials through Particle-Packing-Optimization
  425. Bischof Patrick, Mata-Falcón Jaime, Kaufmann Walter (2022-08)
    Fostering Innovative and Sustainable Mass-Market Construction Using Digital Fabrication with Concrete
  426. Xu Weiguo, Huang Shuyi, Han Dong, Zhang Zhiling et al. (2022-08)
    Toward Automated Construction:
    The Design-to-Printing Workflow for a Robotic In-Situ 3D Printed House
  427. Mir Namra, Khan Shoukat, Kul Anil, Şahin Oğuzhan et al. (2022-08)
    Life Cycle Assessment of Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
  428. Žujović Maša, Obradović Radojko, Rakonjac Ivana, Milošević Jelena (2022-08)
    3D Printing Technologies in Architectural Design and Construction:
    A Systematic Literature Review
  429. Khosravani Mohammad, Haghighi Azadeh (2022-08)
    Large-Scale Automated Additive Construction:
    Overview, Robotic Solutions, Sustainability, and Future Prospect
  430. Raza Muhammad, Zhong Ray (2022-08)
    A Sustainable Roadmap for Additive Manufacturing Using Geopolymers in Construction Industry
  431. Silva Guido, Ñañez Robert, Zavaleta Diana, Burgos Valeria et al. (2022-07)
    Eco-Friendly Additive Construction:
    Analysis of the Printability of Earthen-Based Matrices Stabilized with Potato-Starch-Gel and Sisal-Fibers
  432. Li Mingyang, Zhang Xu, Tay Yi, Ting Guan et al. (2022-07)
    Three-Dimensional (3D) Printing for Building and Construction
  433. Čítek David, Rehacek Stanislav, Dobias Daniel (2022-07)
    Experimental Research on 3D Printed Construction from Cement-Based Composites
  434. Dielemans Gido, Lachmayer Lukas, Recker Tobias, Atanasova Lidia et al. (2022-06)
    Mobile Additive Manufacturing:
    A Case Study of Clay Formwork for Bespoke In-Situ Concrete Construction
  435. Oke Ayodeji, Atofarati John, Bello Sherifat (2022-06)
    Awareness of 3D Printing for Sustainable Construction in an Emerging Economy
  436. Dörfler Kathrin, Dielemans Gido, Lachmayer Lukas, Recker Tobias et al. (2022-06)
    Additive Manufacturing Using Mobile Robots:
    Opportunities and Challenges for Building Construction
  437. Hager Izabela, Maroszek Marcin, Mróz Katarzyna, Kęsek Rafał et al. (2022-06)
    Inter-Layer Bond Strength Testing in 3D Printed Mineral Materials for Construction Applications
  438. Lachmayer Lukas, Recker Tobias, Dielemans Gido, Dörfler Kathrin et al. (2022-05)
    Autonomous Sensing and Localization of a Mobile Robot for Multi-Step Additive Manufacturing in Construction
  439. Nistler Maximilian, Kovaleva Daria, Tepper Louis, Blandini Lucio et al. (2022-05)
    Camera-Based Process Monitoring for Powder-Bed Additive Manufacturing in Construction
  440. Gran Erik, Madrid Javier, Ortega Guillermo, Tenorio Ríos José et al. (2022-05)
    Conceptual Study and Literature Review of Integration of Lean Manufacturing and 3D Printing in Construction to Support Sustainability
  441. Elistratkin Michail, Alfimova Nataliya, Podgorniy Daniil, Olisov Andrey et al. (2022-05)
    Influence of Equipment Operation Parameters on the Characteristics of a Track Produced with Construction 3D Printing
  442. Muthumanickam Naveen, Duarte José, Nazarian Shadi, Bilén Sven (2022-04)
    Metamodels for Rapid Analysis of Large Sets of Building Designs for Robotic Constructability:
    Technology Demonstration Using the NASA 3D Printed Mars Habitat Challenge
  443. Ennab Lena, Dixit Manish, Birgisson Bjorn, Kumar Pranav (2022-04)
    Comparative Life Cycle Assessment of Large-Scale 3D Printing Utilizing Kaolinite-Based Calcium-Sulfoaluminate-Cement Concrete and Conventional Construction
  444. Stieler David, Schwinn Tobias, Menges Achim (2022-04)
    Additive Formwork in Pre-Cast Construction:
    Agent-Based Methods for Fabrication-Aware Modularization of Concrete Building Elements
  445. Uhlík Adam, Buch Mário, Unčík Stanislav (2022-04)
    Effecting the Rheological Properties of Composites for 3D Printing Technology in Construction
  446. Rollakanti Chiranjeevi, Prasad C. (2022-04)
    Applications, Performance, Challenges and Current Progress of 3D Concrete Printing Technologies as the Future of Sustainable Construction:
    A State of the Art Review
  447. Dillenburger Benjamin (2022-04)
    Additive Construction
  448. Buswell Richard, Xu Jie, Becker Daniel, Dobrzanski James et al. (2022-04)
    Geometric Quality Assurance for 3D Concrete Printing and Hybrid Construction Manufacturing Using a Standardised Test Part for Benchmarking Capability
  449. Ulubeyli Serdar (2022-03)
    Lunar Shelter Construction Issues:
    The State of the Art Towards 3D Printing Technologies
  450. Qi Li-gang, Bai Jie, Huang Qing-long, Yang Yan et al. (2022-03)
    Mobile 3D Printing-Techniques for Construction Engineering:
    Outdoor Navigation and Printing Quality-Control
  451. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Yıldırım Gürkan et al. (2022-03)
    Rheological Properties and Compressive Strength of Construction and Demolition Waste-Based Geopolymer Mortars for 3D Printing
  452. Miryousefi Ata Sara, Kazemian Ali, Jafari Amirhosein (2022-03)
    Application of Concrete 3D Printing for Bridge Construction:
    Current Challenges and Future Directions
  453. Sayegh Sameh, Romdhane Lotfi, Manjikian Solair (2022-03)
    A Critical Review of 3D Printing in Construction:
    Benefits, Challenges, and Risks
  454. Lachmayer Lukas, Recker Tobias, Raatz Annika (2022-03)
    Contour-Tracking-Control for Mobile Robots Applicable to Large-Scale Assembly and Additive Manufacturing in Construction
  455. Nguyen-Van Sy, Gwak Kwan-Woong (2022-03)
    A Two-Nozzle Cable-Driven Parallel Robot for 3D Printing Building Construction:
    Path-Optimization and Vibration Analysis
  456. Stieler David, Schwinn Tobias, Menges Achim (2022-03)
    Volumetric Intersections:
    Modularization Approaches for Freeform Prefab Concrete Construction
  457. Guamán-Rivera Robert, Martínez-Rocamora Alejandro, García-Alvarado Rodrigo, Muñoz-Sanguinetti Claudia et al. (2022-02)
    Recent Developments and Challenges of 3D Printed Construction:
    A Review of Research Fronts
  458. Ali Md., Issayev Gani, Shehab Essam, Sarfraz Shoaib (2022-02)
    A Critical Review of 3D Printing and Digital Manufacturing in Construction Engineering
  459. Meisel Nicholas, Watson Nathan, Bilén Sven, Duarte José et al. (2022-02)
    Design and System Considerations for Construction-Scale Concrete Additive Manufacturing in Remote Environments via Robotic-Arm-Deposition
  460. Liu Junli, Nguyen Vuong, Panda Biranchi, Fox Kate et al. (2022-02)
    Additive Manufacturing of Sustainable Construction Materials and Form-Finding Structures:
    A Review on Recent Progresses
  461. Gomaa Mohamed, Jabi Wassim, Soebarto Veronica, Xie Yi (2022-01)
    Digital Manufacturing for Earth Construction:
    A Critical Review
  462. Shakor Pshtiwan, Chu Shaohua, Puzatova (nee Sharanova) Anastasiia, Dini Enrico (2022-01)
    Review of Binder-Jetting 3D Printing in the Construction Industry
  463. Pasco Jubert, Lei Zhen, Aranas Clodualdo (2022-01)
    Additive Manufacturing in Off-Site Construction:
    Review and Future Directions
  464. Yin Jian, Suo Yiru, Lv Tao, Ma Kaisi et al. (2021-12)
    Application of 3D Printing Technology in the Construction Industry and Its Development Prospects
  465. Jones Scott, Hipp Julie, Allen Andrew, Gagnon Cedric (2021-12)
    Rheology and Microstructure Development of Hydrating-Tricalcium-Silicate:
    Implications for Additive Manufacturing in Construction
  466. Batikha Mustafa, Jotangia Rahul, Baaj Mohamad, Mousleh Ibrahim (2021-12)
    3D Concrete Printing for Sustainable and Economical Construction:
    A Comparative Study
  467. Diggs-McGee Brandy, Kreiger Eric (2021-12)
    Using Isolated Temporal Analysis to Aid in the Assessment of Structural Element Quality for Additive Construction
  468. Kajzr Daniel, Břoušek Josef, Petr Tomas, Beran Leoš et al. (2021-12)
    New Design of PLC-Based Robotic Control System for Concrete Printing in Building Construction
  469. Pierson Matthew, Pinkerton Luke (2021-12)
    Direct Tension Testing of Plain and Fiber-Reinforced Concrete for Use in Additive Construction
  470. Stidwell Samuel, Kreiger Eric (2021-12)
    Determination of Mechanical Properties of Additively Constructed Concrete Based on Specimen-Orientation
  471. Weger Daniel, Stengel Thorsten, Gehlen Christoph, Maciejewski Yannick et al. (2021-12)
    Approval for the Construction of the First 3D Printed Detached House in Germany:
    Significance of Large-Scale Element Testing
  472. Lachmayer Lukas, Ekanayaka Virama, Hürkamp André, Raatz Annika (2021-11)
    Approach to an Optimized Printing Path for Additive Manufacturing in Construction Utilizing FEM Modeling
  473. Pajonk Adam, Prieto Alejandro, Blum Ulrich, Knaack Ulrich (2021-11)
    Multi-Material Additive Manufacturing in Architecture and Construction:
    A Review
  474. Gantner Stefan, Rothe Tom, Hühne Christian, Hack Norman (2021-11)
    Reinforcement-Strategies for Additive Manufacturing in Construction Based on Dynamic Fiber Winding:
    Concepts and Initial Case Studies
  475. Guimarães Ana, Delgado João, Lucas Sandra (2021-11)
    Thermal and Environmental Benefits of 3D Printing on Building Construction
  476. Guimarães Ana, Delgado João, Lucas Sandra (2021-11)
    Additive Manufacturing on Building Construction
  477. Deshmukh Aparna, Heintzkill Reed, Huerta Rosalba, Sobolev Konstantin (2021-11)
    Rheological Response of Magnetorheological Cementitious Inks Tuned for Active Control in Digital Construction
  478. Kruger Jacques, Cho Seung, Bester Frederick, Rooyen Algurnon et al. (2021-11)
    Nano-Technology for Improved Three-Dimensional Concrete Printing Constructability
  479. Ko Lesley, Moro Sandro, Bury Jeff, Vickers Tom et al. (2021-11)
    Rheology and Setting Control of Concrete for Digital Construction
  480. Xu Zhen, Song Tao, Guo Shuai, Peng Jiangtao et al. (2021-10)
    Robotics Technologies Aided for 3D Printing in Construction:
    A Review
  481. Sesetti Harika, Lalithya Muthina, Kumar Pala (2021-10)
    3D Concrete Printing in Construction Industry:
    A State of the Art
  482. Rollakanti Chiranjeevi, Prasad C., Joe Adams (2021-10)
    Digital Concrete for Sustainable Construction Industry:
    A State of the Art Review
  483. Villacrés Juan, Guamán-Rivera Robert, Menéndez Oswaldo, Cheein Fernando (2021-10)
    3D Printing Deformation Estimation Using Artificial Vision-Strategies for Smart-Construction
  484. Shahzad Qamar, Shen Junyi, Naseem Rabia, Yao Yonggang et al. (2021-10)
    Influence of Phase-Change-Material on Concrete Behavior for Construction 3D Printing
  485. Olsson Nils, Arica Emrah, Woods Ruth, Madrid Javier (2021-10)
    Industry 4.0 in a Project Context:
    Introducing 3D Printing in Construction Projects
  486. Mechtcherine Viktor, Mai (née Dressler) Inka, Empelmann Martin, Gehlen Christoph et al. (2021-09)
    Digital Concrete Construction by Means of Additive Processes:
    State of the Art and Research Needs
  487. Khandelwal Vaatsuly, Bhatia Vibhav, Dogra Vinay, Sharma Shivam et al. (2021-08)
    3D Printer Robot for Civil Construction:
    A Bond Graph Approach
  488. Kazemian Ali, Khoshnevis Behrokh (2021-08)
    Real-Time Extrusion-Quality-Monitoring-Techniques for Construction 3D Printing
  489. Umar Tariq (2021-08)
    Key Factors Influencing the Implementation of Three-Dimensional Printing in Construction
  490. Bedarf Patrick, Dutto Alessandro, Zanini Michele, Dillenburger Benjamin (2021-08)
    Foam 3D Printing for Construction:
    A Review of Applications, Materials, and Processes
  491. Babbar Atul, Rai Aryan, Sharma Ankit (2021-08)
    Latest Trend in Building Construction:
    Three-Dimensional Printing
  492. Duarte Gonçalo, Brown Nathan, Memari Ali, Duarte José (2021-07)
    Learning from Historical Structures under Compression for Concrete 3D Printing Construction
  493. Leite Gabriela, Fontana Marcele (2021-07)
    Additive Manufacturing and the Evolution of the Construction Industry:
    A Systematic Literature Review 2015-2021
  494. Haghighi Azadeh, Mohammed Abdullah, Wang Lihui (2021-06)
    Energy Efficient Multi-Robotic 3D Printing for Large-Scale Construction:
    Could This Technique Contribute to Sustainability of Future Buildings?
  495. Kloft Harald, Gehlen Christoph, Dörfler Kathrin, Hack Norman et al. (2021-06)
    TRR 277:
    Additive Manufacturing in Construction
  496. Prasittisopin Lapyote, Sakdanaraseth Thanut, Horayangkura Vimolsiddhi (2021-06)
    Design and Construction Method of a 3D Concrete Printing Self-Supporting Curvi-Linear Pavilion
  497. Pacillo Gerardo, Ranocchiai Giovanna, Loccarini Federica, Fagone Mario (2021-05)
    Additive Manufacturing in Construction:
    A Review on Technologies, Processes, Materials, and Their Applications of 3D and 4D Printing
  498. Li Hui, Meng Huamin, Lan Mingzhang, Zhou Jian et al. (2021-05)
    Development of a Novel Material and Casting-Method for In-Situ Construction on Mars
  499. Pan Yifan, Zhang Yulu, Zhang Dakang, Song Yuying (2021-05)
    3D Printing in Construction:
    State of the Art and Applications
  500. Javed Ali, Mantawy Islam, Azizinamini Atorod (2021-05)
    3D Printing of Ultra-High-Performance Concrete for Robotic Bridge Construction
  501. Şahin Oğuzhan, İlcan Hüseyin, Ateşli Anıl, Kul Anil et al. (2021-05)
    Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
  502. Adaloudis Max, Bonnin Roca Jaime (2021-05)
    Sustainability Tradeoffs in the Adoption of 3D Concrete Printing in the Construction Industry
  503. Khajavi Siavash, Tetik Müge, Mohite Ashish, Peltokorpi Antti et al. (2021-04)
    Additive Manufacturing in the Construction Industry:
    The Comparative Competitiveness of 3D Concrete Printing
  504. Zhu Binrong, Nematollahi Behzad, Pan Jinlong, Zhang Yang et al. (2021-04)
    3D Concrete Printing of Permanent Formwork for Concrete Column Construction
  505. Mullett Paul, Ghaffar Seyed, Perry Paul (2021-04)
    Discussion:
    Commentary on 3D Printing Set to Transform the Construction Industry
  506. Ning Xin, Liu Tong, Wu Chunlin, Wang Chao (2021-04)
    3D Printing in Construction:
    Current Status, Implementation Hindrances, and Development Agenda
  507. Ting Guan, Tay Yi, Tan Ming (2021-04)
    Experimental Measurement on the Effects of Recycled Glass-Cullets as Aggregates for Construction 3D Printing
  508. Lesovik Valeriy, Tolypina Natalia, Glagolev Evgeniy, Tolypin Daniil (2021-03)
    Reuse of 3D Additive Manufacturing Concrete Scrap in Construction
  509. Schuldt Steven, Jagoda Jeneé, Hoisington Andrew, Delorit Justin (2021-03)
    A Systematic Review and Analysis of the Viability of 3D Printed Construction in Remote Environments
  510. Pradhananga Piyush, ElZomor Mohamed, Santi Kasabdji Gabriella (2021-02)
    Identifying the Challenges to Adopting Robotics in the US Construction Industry
  511. Besklubova Svetlana, Skibniewski Mirosław, Zhang Xueqing (2021-02)
    Factors Affecting 3D Printing Technology Adaptation in Construction
  512. Pessoa Ana Sofia, Guimarães Ana, Lucas Sandra, Simões Nuno (2021-02)
    3D Printing in the Construction Industry:
    A Systematic Review of the Thermal Performance in Buildings
  513. Ramadany Mohamed, Bajjou Mohamed (2021-01)
    Applicability and Integration of Concrete Additive Manufacturing in Construction Industry:
    A Case Study
  514. Gomaa Mohamed, Jabi Wassim, Veliz-Reyes Alejandro, Soebarto Veronica (2021-01)
    3D Printing System for Earth-Based Construction:
    Case Study of Cob
  515. Kloft Harald, Gehlen Christoph, Dörfler Kathrin, Hack Norman et al. (2021-01)
    TRR 277:
    Additive Manufacturing in Construction
  516. Wang Brydon, Rimmer Matthew (2021-01)
    3D Printing and Housing:
    Intellectual Property and Construction Law
  517. Mohammad Malek, Masad Eyad, Ghamdi Sami (2020-12)
    3D Concrete Printing Sustainability:
    A Comparative Life Cycle Assessment of Four Construction Method Scenarios
  518. Vasilić Ksenija (2020-12)
    Additive Manufacturing in Concrete Construction:
    Current Status
  519. Placzek Gerrit, Schwerdtner Patrick (2020-12)
    Derivation of Integration Approaches for "Concrete 3D Printing" in the Construction Process Based on Features of Additive Manufacturing
  520. Kaszyńska Maria, Skibicki Szymon, Hoffmann Marcin (2020-12)
    3D Concrete Printing for Sustainable Construction
  521. Krotov Oleg, Lazarev Yuriy, Velichkin Viktor, Petrochenko Marina et al. (2020-11)
    The Multi-Storey Concrete Printing Construction Technology
  522. Dubov Alexey, Ruben Sam (2020-11)
    Material Development Standards and Methods for Additive Manufacturing in Construction to Meet Building Code Requirements for Certification
  523. Dubov Alexey, Ruben Sam, Korshikov Vasily, Ivanova Anna et al. (2020-11)
    3D Printing of Polymers with Continuous Fibers to Replace Steel-Reinforcement and Structural Steel in Construction
  524. Mohamed Shibly Maahir, Soto Borja (2020-10)
    Threat Modeling in Construction:
    An Example of a 3D Concrete Printing System
  525. Xu Xuchu, Wang Ruoyu, Cao Qiming, Feng Chen (2020-10)
    Towards 3D-Perception and Closed-Loop-Control for 3D Construction Printing
  526. Tay Yi, Panda Biranchi, Ting Guan, Ahamed N. et al. (2020-10)
    3D Printing for Sustainable Construction
  527. Hossain Md., Zhumabekova Altynay, Paul Suvash, Kim Jong (2020-10)
    A Review of 3D Printing in Construction and Its Impact on the Labor Market
  528. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2020-10)
    Development of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction
  529. Sharma Shivam, Mitra Soham, Adesina Adeyemi, Das Sreekanta (2020-09)
    Construction Industry with 3D Printer:
    A New Era
  530. Maboudi Mehdi, Gerke Markus, Hack Norman, Brohmann Leon et al. (2020-08)
    Current Surveying Methods for the Integration of Additive Manufacturing in the Construction Process
  531. Ortega Guillermo, Madrid Javier, Olsson Nils, Tenorio Ríos José (2020-08)
    The Application of 3D Printing Techniques in the Manufacturing of Cement-Based Construction Products and Experiences Based on the Assessment of Such Products
  532. Sambucci Matteo, Marini Danilo, Sibai Abbas, Valente Marco (2020-08)
    Preliminary Mechanical Analysis of Rubber-Cement Composites Suitable for Additive Process Construction
  533. Kreiger Eric, Diggs-McGee Brandy, Wood Tanner, MacAllister Bruce et al. (2020-07)
    Field Considerations for Deploying Additive Construction
  534. Cascone Paolo, Laddaga Maddalena, Forestiero Federico (2020-07)
    Digital Construction:
    3D Printing for Performative Houses
  535. Ramani Ayyagari, Soto Borja (2020-07)
    Preliminary Study of the Implications of 3D Printing on the Construction Supply Chain
  536. Muishout Chantal, Coggins Tom, Schipper Roel (2020-07)
    More Than Meets the Eye?:
    Robotisation and Normativity in the Dutch Construction Industry
  537. Costa Eduardo, Shepherd Paul, Orr John, Ibell Tim et al. (2020-07)
    Automating Concrete Construction:
    Digital Design of Non-Prismatic Reinforced Concrete Beams
  538. Shahzad Qamar, Wang Xujiang, Wang Wenlong, Wan Yi et al. (2020-06)
    Coordinated Adjustment and Optimization of Setting-Time, Flowability, and Mechanical Strength for Construction 3D Printing Material Derived from Solid Waste
  539. Manikandan Karthick, Jiang Xuepeng, Singh Amit, Li Beiwen et al. (2020-06)
    Effects of Nozzle Geometries on 3D Printing of Clay Constructs:
    Quantifying Contour-Deviation and Mechanical Properties
  540. Alhumayani Hashem, Gomaa Mohamed, Soebarto Veronica, Jabi Wassim (2020-06)
    Environmental Assessment of Large-Scale 3D Printing in Construction:
    A Comparative Study between Cob and Concrete
  541. Krupík Pavel (2020-06)
    3D Printers as Part of Construction 4.0 with a Focus on Transport Constructions
  542. Guamán-Rivera Robert, García-Alvarado Rodrigo, Martínez-Rocamora Alejandro, Cheein Fernando (2020-05)
    A Comprehensive Performance Evaluation of Different Mobile Manipulators Used as Displaceable 3D Printers of Building Elements for the Construction Industry
  543. Muthukrishnan Shravan, Kua Harn, Yu Ling, Chung Jacky (2020-05)
    Fresh Properties of Cementitious Materials Containing Rice-Husk-Ash for Construction 3D Printing
  544. Allouzi Rawan, Azhari Wael, Allouzi Rabab (2020-05)
    Conventional Construction and 3D Printing:
    A Comparison Study on Material-Cost in Jordan
  545. Hoffmann Marcin, Skibicki Szymon, Pankratow Paweł, Zieliński Adam et al. (2020-04)
    Automation in the Construction of a 3D Printed Concrete Wall with the Use of a Lintel Gripper
  546. Jagoda Jeneé, Diggs-McGee Brandy, Kreiger Megan, Schuldt Steven (2020-04)
    The Viability and Simplicity of 3D Printed Construction:
    A Military Case Study
  547. Nazarian Shadi, Duarte José, Bilén Sven, Memari Ali et al. (2020-03)
    An Overview of the Execution of 3D Printed Sub-Scale Habitat on Mars:
    A Case Study to Exemplify the Automated Construction Process
  548. Grigoryan Erik, Semenova M. (2020-02)
    Automation of the Construction Process by Using a Hinged Robot with Interchangeable Nozzles
  549. Verian Kho, Kowaleski Scott, Carli Matthew, Bright Randall et al. (2020-02)
    Properties of 3D Printing Mortar with the Development of a 3D Construction Printing Delivery System
  550. Grigoryan Erik, Babanina Anna, Kulakov Kirill (2019-12)
    Automation of the Construction Process by Using a Hinged Robot with Interchangeable Nozzles
  551. Kruger Jacques, Cho Seung, Zeranka Stephan, Vintila Cristian et al. (2019-12)
    3D Concrete Printer Parameter Optimization for High-Rate Digital Construction Avoiding Plastic Collapse
  552. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
    New Carbon Fiber Reinforcement for Digital, Automated Concrete Construction
  553. Kloft Harald, Hack Norman, Mainka Jeldrik, Brohmann Leon et al. (2019-11)
    Additive Manufacturing in Construction:
    First 3D-Printed Reinforced Concrete Components Using Shotcrete 3D Printing (SC3DP) Technology
  554. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
    Mineral-Impregnated Carbon-Fiber Composites as Novel Reinforcement for Concrete Construction:
    Material and Automation Perspectives
  555. Freire Tiago, Brun Francis, Mateus Artur, Gaspar Florindo (2019-11)
    3D Printing Technology in the Construction Industry
  556. Annappa Vani, Gaspar Florindo, Mateus Artur, Vitorino João (2019-11)
    3D Printing for Construction Using Stone Sludge
  557. Silva Guido, Quispe L., Kim Suyeon, Nakamatsu Javier et al. (2019-11)
    Development of a Stabilized Natural Fiber-Reinforced Earth Composite for Construction Applications Using 3D Printing
  558. Paolini Alexander, Kollmannsberger Stefan, Rank Ernst (2019-10)
    Additive Manufacturing in Construction:
    A Review on Processes, Applications, and Digital Planning Methods
  559. Vasilić Ksenija (2019-09)
    Additive Manufacturing in Concrete Construction:
    Current Status
  560. Bong Shin, Nematollahi Behzad, Xia Ming, Nazari Ali et al. (2019-09)
    Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite for Digital Construction Applications
  561. Arunothayan Arun, Nematollahi Behzad, Bong Shin, Ranade Ravi et al. (2019-09)
    Hardened Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction Applications
  562. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-09)
    Enhancing Strength of Powder-Based 3D Printed Geopolymers for Digital Construction Applications
  563. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-09)
    Quantifying Constructability Performance of 3D Concrete Printing via Rheology-Based Analytical Models
  564. Valente Marco, Sibai Abbas, Sambucci Matteo (2019-09)
    Extrusion-Based Additive Manufacturing of Concrete Products:
    Revolutionizing and Remodeling the Construction Industry
  565. Mechtcherine Viktor, Nerella Venkatesh, Will Frank, Näther Mathias et al. (2019-08)
    Large-Scale Digital Concrete Construction:
    CONPrint3D Concept for On-Site, Monolithic 3D Printing
  566. Kim Kwan, Yeon Jaeheum, Lee Hee, Yeon Jung (2019-08)
    Dimensional Stability of SBR-Modified Cementitious Mixtures for Use in 3D Additive Construction
  567. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum, Lee Hee (2019-08)
    Compressive and Flexural Strengths of EVA-Modified Mortars for 3D Additive Construction
  568. Watson Nathan, Meisel Nicholas, Bilén Sven, Duarte José et al. (2019-08)
    Large-Scale Additive Manufacturing of Concrete Using a Six-Axis Robotic Arm for Autonomous Habitat Construction
  569. Kim Kwan, Yeon Jaeheum, Lee Hee, Yeon Kyu-Seok (2019-08)
    Feasibility Study of SBR-Modified Cementitious Mixtures for Use as 3D Additive Construction Materials
  570. Zhu Binrong, Pan Jinlong, Nematollahi Behzad, Zhou Zhenxin et al. (2019-07)
    Development of 3D Printable Engineered Cementitious Composites with Ultra-High Tensile Ductility for Digital Construction
  571. Meng Xiangcheng, Zhang Xueqing (2019-07)
    Case-Study-Analysis for Development-Strategies of Construction 3D Printing
  572. Yeon Kyu-Seok, Kim Kwan, Yeon Jaeheum, Lee Hee (2019-07)
    Fresh Properties of EVA-Modified Cementitious Mixtures for Use in Additive Construction by Extrusion
  573. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-07)
    Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications
  574. Davila Delgado Juan, Oyedele Lukumon, Ajayi Anuoluwapo, Akanbi Lukman et al. (2019-07)
    Robotics and Automated Systems in Construction:
    Understanding Industry-Specific Challenges for Adoption
  575. Ducoulombier Nicolas (2019-06)
    Characterisation and Modelling of Interfacial-Damage in Fiber-Reinforced Concrete for 3D Printing in Construction
  576. Foteinopoulos Panagis, Papacharalampopoulos Alexios, Stavropoulos Panagiotis (2019-06)
    Block-Based Analytical Hierarchy Process Applied for the Evaluation of Construction Sector Additive Manufacturing
  577. Bhardwaj Abhinav, Jones Scott, Kalantar Negar, Pei Zhijian et al. (2019-06)
    Additive Manufacturing Processes for Infrastructure Construction:
    A Review
  578. Soto Borja, Agustí-Juan Isolda, Joss Samuel, Hunhevicz Jens (2019-05)
    Implications of Construction 4.0 to the Workforce and Organizational Structures
  579. Ji Guangchao, Ding Tao, Xiao Jianzhuang, Du Shupeng et al. (2019-05)
    A 3D Printed Ready-Mixed Concrete Power-Distribution Substation:
    Materials and Construction Technology
  580. Olsson Nils, Shafqat Ali, Arica Emrah, Økland Andreas (2019-05)
    3D Printing Technology in Construction:
    Results from a Survey
  581. Jacob Matthias (2019-05)
    The Construction Factory of the Future
  582. Lafhaj Zoubeir, Dakhli Zakaria (2019-04)
    Performance Indicators of Printed Construction Materials:
    A Durability-Based Approach
  583. Diggs-McGee Brandy, Kreiger Eric, Kreiger Megan, Case Michael (2019-04)
    Print Time vs. Elapsed Time:
    A Temporal Analysis of a Continuous Printing Operation for Additive Constructed Concrete
  584. Kreiger Eric, Kreiger Megan, Case Michael (2019-04)
    Development of the Construction Processes for Reinforced Additively Constructed Concrete
  585. Lee Dongyoun, Kim Hakmin, Sim Joonhyeok, Lee Dongmin et al. (2019-04)
    Trends in 3D Printing Technology for Construction Automation Using Text Mining
  586. Furet Benoît, Poullain Philippe, Garnier Sébastien (2019-04)
    3D Printing for Construction Based on a Complex Wall of Polymer-Foam and Concrete
  587. Craveiro Flávio, Duarte José, Bártolo Helena, Bartolo Paulo (2019-04)
    Additive Manufacturing as an Enabling Technology for Digital Construction:
    A Perspective on Construction 4.0
  588. Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2019-03)
    Method of Optimization for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications
  589. Zuo Zibo, Gong Jian, Huang Yulin, Zhan Yijian et al. (2019-03)
    Experimental Research on Transition from Scale 3D Printing to Full-Size Printing in Construction
  590. Marchment Taylor, Sanjayan Jay, Xia Ming (2019-03)
    Method of Enhancing Inter-Layer Bond Strength in Construction-Scale 3D Printing with Mortar by Effective Bond Area Amplification
  591. Bentz Dale, Jones Scott, Bentz Isaiah, Peltz Max (2019-02)
    Towards the Formulation of Robust and Sustainable Cementitious Binders for 3D Additive Construction by Extrusion
  592. Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2019-02)
    Performance-Based Testing of Portland Cement Concrete for Construction-Scale 3D Printing
  593. Holt Camille, Edwards Laurie, Keyte Louise, Moghaddam Farzad et al. (2019-02)
    Construction 3D Printing
  594. Rushing Todd, Stynoski Peter, Barna Lynette, Chaar Ghassan et al. (2019-02)
    Investigation of Concrete Mixtures for Additive Construction
  595. Nematollahi Behzad, Xia Ming, Vijay Praful, Sanjayan Jay (2019-02)
    Properties of Extrusion-Based 3D Printable Geopolymers for Digital Construction Applications
  596. Sanjayan Jay, Nematollahi Behzad (2019-02)
    3D Concrete Printing for Construction Applications
  597. Kaufhold Julia, Kohl Johannes, Nerella Venkatesh, Schröfl Christof et al. (2019-02)
    Wood-Based Support Material for Extrusion-Based Digital Construction
  598. Panda Biranchi, Lim Jian, Tan Ming (2019-02)
    Mechanical Properties and Deformation Behavior of Early-Age Concrete in the Context of Digital Construction
  599. Kazemian Ali, Yuan Xiao, Davtalab Omid, Khoshnevis Behrokh (2019-01)
    Computer-Vision for Real-Time Extrusion-Quality-Monitoring and Control in Robotic Construction
  600. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Malek Sardar (2019-01)
    Review of Emerging Additive Manufacturing Technologies in 3D Printing of Cementitious Materials in the Construction Industry
  601. Panda Biranchi, Tan Ming (2018-11)
    Rheological Behavior of High-Volume Fly-Ash Mixtures Containing Micro-Silica for Digital Construction Application
  602. Heever Marchant, Bester Frederick (2018-11)
    3D Printing of Concrete within the South African Building and Construction Industry
  603. Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
    Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction
  604. Agustí-Juan Isolda, Jipa Mihail-Andrei, Habert Guillaume (2018-11)
    Environmental Assessment of Multi-Functional Building Elements Constructed with Digital Fabrication Techniques
  605. Nerella Venkatesh, Beigh Mirza, Fataei Shirin, Mechtcherine Viktor (2018-11)
    Strain-Based Approach for Measuring Structural Build-Up of Cement-Pastes in the Context of Digital Construction
  606. Teizer Jochen, Blickle Alexander, King Tobias, Leitzbach Olaf et al. (2018-10)
    BIM for 3D Printing in Construction
  607. Nerella Venkatesh, Näther Mathias, Iqbal Arsalan, Butler Marko et al. (2018-09)
    In-Line Quantification of Extrudability of Cementitious Materials for Digital Construction
  608. Fiske Michael, Edmunson Jennifer, Weite Edward, Fikes John et al. (2018-09)
    The Disruptive Technology That Is Additive Construction:
    System Development Lessons Learned for Terrestrial and Planetary Applications
  609. Tan Kang (2018-09)
    The Framework of Combining Artificial Intelligence and Construction 3D Printing in Civil Engineering
  610. Bard Joshua, Cupkova Dana, Washburn Newell, Zeglin Garth (2018-09)
    Thermally Informed Robotic Topologies:
    Profile 3D Printing for the Robotic Construction of Concrete Panels, Thermally Tuned Through High-Resolution Surface Geometry
  611. Kazemian Ali, Yuan Xiao, Meier Ryan, Khoshnevis Behrokh (2018-09)
    A Framework for Performance-Based Testing of Fresh Mixtures for Construction-Scale 3D Printing
  612. Nematollahi Behzad, Xia Ming, Bong Shin, Sanjayan Jay (2018-09)
    Hardened Properties of 3D Printable One-Part Geopolymer for Construction Applications
  613. Mechtcherine Viktor, Nerella Venkatesh, Ogura Hiroki, Grafe Jasmin et al. (2018-09)
    Alternative Reinforcements for Digital Concrete Construction
  614. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2018-09)
    Compressive Strength and Dimensional Accuracy of Portland Cement Mortar Made Using Powder-Based 3D Printing for Construction Applications
  615. Subrin Kévin, Bressac Thomas, Garnier Sébastien, Ambiehl Alexandre et al. (2018-09)
    Improvement of the Mobile Robot Location Dedicated for Habitable House Construction by 3D Printing
  616. Ghaffar Seyed, Mullett Paul (2018-09)
    Commentary:
    3D Printing Set to Transform the Construction Industry
  617. Liu Jingkuang, Li Guokai (2018-08)
    Research on the Development of 3D Printing Construction Industry Based on Diamond-Model
  618. Lowke Dirk, Dini Enrico, Perrot Arnaud, Weger Daniel et al. (2018-07)
    Particle-Bed 3D Printing in Concrete Construction:
    Possibilities and Challenges
  619. Nerella Venkatesh, Ogura Hiroki, Mechtcherine Viktor (2018-07)
    Incorporating Reinforcement into Digital Concrete Construction
  620. Buchli Jonas, Giftthaler Markus, Kumar Nitish, Lussi Manuel et al. (2018-07)
    Digital In-Situ Fabrication:
    Challenges and Opportunities for Robotic In-Situ Fabrication in Architecture, Construction, and Beyond
  621. Albar Abdulrahman, Swash Mohammad, Ghaffar Seyed (2018-07)
    Scalable Additive Manufacturing Solution for Construction
  622. Bentz Dale, Jones Scott, Bentz Isaiah, Peltz Max (2018-06)
    Towards the Formulation of Robust and Sustainable Cementitious Binders for 3D Additive Construction by Extrusion
  623. Bhardwaj Abhinav, Zou Na, Pei Zhijian (2018-06)
    Additive Manufacturing for Civil Infrastructure Design and Construction:
    Current State and Gaps
  624. Poullain Philippe, Paquet Elodie, Garnier Sébastien, Furet Benoît (2018-06)
    On-Site Deployment of 3D Printing for the Building Construction:
    The Case of YhnovaTM
  625. Yang Hongxiong, Chung Jacky, Chen Yuhong, Li Yijia (2018-06)
    The Cost Calculation Method of Construction 3D Printing Aligned with Internet of Things
  626. Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
    3D Printed Steel-Reinforcement for Digital Concrete Construction:
    Manufacture, Mechanical Properties and Bond Behavior
  627. Ghaffar Seyed, Corker Jorge, Fan Mizi (2018-05)
    Additive Manufacturing Technology and Its Implementation in Construction as an Eco-Innovative Solution
  628. Soto Borja, Agustí-Juan Isolda, Hunhevicz Jens, Joss Samuel et al. (2018-05)
    Productivity of Digital Fabrication in Construction:
    Cost and Time-Analysis of a Robotically Built Wall
  629. Burroughs Jedadiah, Johnson Carol, Chaar Ghassan, Banko Marion et al. (2018-04)
    Automated Construction with Concrete:
    Response of Wall- and Beam-Sections to Blast-Loads
  630. Lafhaj Zoubeir, Rabenantoandro Andry, Krimi Imane, Dakhli Zakaria et al. (2018-03)
    3D Printing in Construction:
    Application-Framework for a Robotic-Arm Based on the Extrusion-Technique
  631. Delgado Camacho Daniel, Clayton Patricia, Brien William, Seepersad Carolyn et al. (2018-02)
    Applications of Additive Manufacturing in the Construction Industry:
    A Forward-Looking Review
  632. Davtalab Omid, Kazemian Ali, Khoshnevis Behrokh (2018-01)
    Perspectives on a BIM-Integrated Software Platform for Robotic Construction through Contour Crafting
  633. Sakin Mehmet, Kiroglu Yusuf (2017-10)
    3D Printing of Buildings:
    Construction of the Sustainable Houses of the Future by BIM
  634. Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
    Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction
  635. Lao Wenxin, Li Mingyang, Masia Lorenzo, Tan Ming (2017-08)
    Approaching Rectangular Extrudate in 3D Printing for Building and Construction by Experimental Iteration of Nozzle Design
  636. Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
    Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material
  637. Zuo Zibo, Gong Jian, Huang Yulin (2017-07)
    Performance of 3D Printing in Construction by Using Computer-Control-Technology
  638. Sakka Fatima, Hamzeh Farook (2017-07)
    3D Concrete Printing in the Service of Lean Construction
  639. Izard Jean-Baptiste, Dubor Alexandre, Hervé Pierre-Elie, Cabay Edouard et al. (2017-07)
    On the Improvements of a Cable-Driven Parallel Robot for Achieving Additive Manufacturing for Construction
  640. Delgado Camacho Daniel, Clayton Patricia, Brien William, Ferron Raissa et al. (2017-07)
    Applications of Additive Manufacturing in the Construction Industry:
    A Prospective Review
  641. Kazemian Ali, Yuan Xiao, Meier Ryan, Cochran Evan et al. (2017-06)
    Construction-Scale 3D Printing:
    Shape Stability of Fresh Printing Concrete
  642. Krimi Imane, Lafhaj Zoubeir, Ducoulombier Laure (2017-05)
    Prospective Study on the Integration of Additive Manufacturing to Building Industry:
    Case of a French Construction Company
  643. Tay Yi, Panda Biranchi, Paul Suvash, Mohamed Nisar et al. (2017-05)
    3D Printing Trends in Building and Construction Industry:
    A Review
  644. Loveridge Russell, Coray Tanja (2017-04)
    Robots on Construction Sites:
    The Potential and Challenges of On-Site Digital Fabrication
  645. Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
    Cementitious Materials for Construction-Scale 3D Printing:
    Laboratory Testing of Fresh Printing Mixture
  646. Rushing Todd, Chaar Ghassan, Eick Brian, Burroughs Jedadiah et al. (2017-01)
    Investigation of Concrete Mixtures for Additive Construction
  647. Labonnote Nathalie, Rønnquist Anders, Manum Bendik, Rüther Petra (2016-09)
    Additive Construction:
    State of the Art, Challenges and Opportunities
  648. Kothman Ivo, Faber Niels (2016-09)
    How 3D Printing Technology Changes the Rules of the Game:
    Insights from the Construction Sector
  649. Khoshnevis Behrokh, Yuan Xiao, Zahiri Behnam, Zhang Jing et al. (2016-08)
    Construction by Contour Crafting Using Sulfur-Concrete with Planetary Applications
  650. Hager Izabela, Golonka Anna, Putanowicz Roman (2016-08)
    3D Printing of Buildings and Building Components as the Future of Sustainable Construction?
  651. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
    Additive Manufacturing of Concrete in Construction:
    Potentials and Challenges of 3D Concrete Printing
  652. Gardiner James, Janssen Steven, Kirchner Nathan (2016-07)
    A Realization of a Construction-Scale Robotic System for 3D Printing of Complex Formwork
  653. Teizer Jochen, Blickle Alexander, King Tobias, Leitzbach Olaf et al. (2016-07)
    Large-Scale 3D Printing of Complex Geometric Shapes in Construction
  654. Lim Sungwoo, Buswell Richard, Valentine Philip, Piker Daniel et al. (2016-06)
    Modelling Curved-Layered Printing Paths for Fabricating Large-Scale Construction Components
  655. Wu Peng, Wang Jun, Wang Xiangyu (2016-04)
    A Critical Review of the Use of 3D Printing in the Construction Industry
  656. Aejmelaeus-Lindström Johan, Willmann Jan, Tibbits Skylar, Gramazio Fabio et al. (2016-04)
    Jammed Architectural Structures:
    Towards Large-Scale Reversible Construction
  657. Agustí-Juan Isolda, Habert Guillaume (2016-04)
    An Environmental Perspective on Digital Fabrication in Architecture and Construction
  658. Werkheiser Niki, Edmunson Jennifer, Fiske Michael, Khoshnevis Behrokh (2015-09)
    On the Development of Additive Construction Technologies for Application to Development of Lunar/Martian Surface Structures Using In-Situ Materials
  659. Perkins Isaac, Skitmore Martin (2015-03)
    Three-Dimensional Printing in the Construction Industry:
    A Review
  660. Ding Lieyun, Wei Ran, Che Haichao (2014-12)
    Development of a BIM-Based Automated Construction System
  661. Keating Steven, Spielberg Nathan, Klein John, Oxman Neri (2014-05)
    A Compound Arm Approach to Digital Construction:
    A Mobile Large-Scale Platform for On-Site Sensing, Design, and Digital Fabrication
  662. Gardiner James, Janssen Steven (2014-05)
    FreeFab:
    Development of a Construction-Scale Robotic Formwork 3D Printer
  663. Jeon Kwang-Hyun, Park Min-Beom, Kang Min-Kyung, Kim Jung-Hoon (2013-11)
    Development of an Automated Freeform Construction System and Its Construction Materials
  664. Howe Scott, Wilcox Brian, McQuin Christopher, Townsend Julie et al. (2013-09)
    Faxing Structures to the Moon:
    Freeform Additive Construction System (FACS)
  665. Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias, Langenberg Silke (2013-05)
    Complex Concrete Constructions:
    Merging Existing Casting Techniques with Digital Fabrication
  666. Helm Volker, Jenny Ercan, Gramazio Fabio, Kohler Matthias (2012-10)
    Mobile Robotic Fabrication on Construction Sites:
    DimRob
  667. Zhang Jing, Khoshnevis Behrokh (2012-09)
    Optimal Machine Operation Planning for Construction by Contour Crafting
  668. Leach Neil, Carlson Anders, Khoshnevis Behrokh, Thangavelu Madhu (2012-09)
    Robotic Construction by Contour Crafting:
    The Case of Lunar Construction
  669. Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
    Developments in Construction-Scale Additive Manufacturing Processes
  670. Buswell Richard, Thorpe Tony, Soar Rupert, Gibb Alistar (2008-05)
    Design, Data and Process Issues for Mega-Scale Rapid Manufacturing Machines Used for Construction
  671. Buswell Richard, Soar Rupert, Gibb Alistar, Thorpe Tony (2006-06)
    Freeform Construction:
    Mega-Scale Rapid Manufacturing for Construction
  672. Hwang Dooil, Khoshnevis Behrokh (2005-11)
    An Innovative Construction Process-Contour Crafting (CC)
  673. Soar Rupert (2005-11)
    Additive Manufacturing Technologies for the Construction Industry
  674. Khoshnevis Behrokh (2003-11)
    Automated Construction by Contour Crafting:
    Related Robotics and Information Technologies
  675. Khoshnevis Behrokh, Bekey George (2002-09)
    Automated Construction Using Contour Crafting:
    Applications on Earth and Beyond
  676. Pegna Joseph (1997-02)
    Exploratory Investigation of Solid Freeform Construction