Skip to content

#manufacturing

Keywords by Co - Occurrence

  1. Chougule Pranav, Abraham David, Farnam Yaghoob, Ebrahimkhanlou Arvin (2026-04)
    Laser-Based Monitoring of Robotic Carbon Dioxide Injection in Fresh Additively Manufactured Concrete
  2. Tang Boyang, Yan Jiachuan, Han Xiaoyu, Lin Yini et al. (2026-04)
    Failure Mechanisms of 3D Printed Formwork Arches: The Critical Role of Interfacial Bond and Manufacturing Parameters
  3. Rajkumar P., Reethu D., Shyamala G., Aamri Ahmed et al. (2026-04)
    Advances in Additive Manufacturing for Construction:
    A Scientometric analysis of 3D Printing Research
  4. Brunner Kim, Kostner Julia, Weger Daniel, Stengel Thorsten et al. (2026-03)
    Durability of Additively Manufactured SPI Components:
    Influence of Layer-Related Microstructural Characteristics
  5. Gupta Shashank, Ghantous Rita, Weiss William, Moini Mohamadreza (2026-03)
    Pore Connectivity and Arrangement in Additively Manufactured Cementitious Material
  6. Bai Songlin, Yao Xiaofei, Yang Min, Liu Shilong et al. (2026-03)
    Design and Construction of Spatial Curved Structures Based on Concrete Additive Manufacturing:
    A Case Study of an Irregular Gatehouse
  7. Roske Dieter (2026-03)
    A Novel Approach to Additive Manufacturing:
    The Vibration-Modulated 3D Concrete Print Head
  8. Martins Diana, Matos João, Souda Diogo, Almeida Fernando (2026-03)
    COLD:
    Control and Optimization of Layer Deposition in Large-Scale Additive Manufacturing
  9. Silvennoinen Heidi, Honic Meliha, Slavkovic Katarina, Block Philippe et al. (2026-03)
    Additive Manufacturing for Circular Construction:
    A Review of Design Strategies and Their Assessment
  10. Das Souvik, Lee Jonathan, Wei Jianqiang (2026-02)
    Tailoring Ultra-High Performance Concrete for Additive Manufacturing:
    Synergistic Roles of Superplasticizer and Viscosity-Modifying Admixture in Printability and Performance
  11. Zhu Wenxuan, Zhang Yu, Zhang Yunsheng, Liu Chao et al. (2026-02)
    Multiscale Investigation of Manufactured Sand Characteristics on 3D Printed Concrete Performance:
    Particle Morphology and Stone Powder Effects
  12. Esan Taiwo, Kupolati Williams, Ackerman Chris (2026-02)
    Advances in Additive Manufacturing for Architectural Acoustics:
    Design, Materials, Validation, and Implementation Challenges in Building Construction
  13. Mirmotalebi Seyedali, Moon Hyosoo, Tesiero Raymond, Noor Sadia (2026-02)
    Comparative Evaluation of Voxel and Mesh Representations for Digital Defect Detection in Construction-Scale Additive Manufacturing.
  14. Prakash Pawan, Tripathi Shubham, Zade Nikhil, Shariff Mohammad (2026-02)
    Experimental and Numerical Investigation of Bond and Flexural Behaviour of Additively Manufactured Structural Concrete Beams
  15. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhu Chao et al. (2026-02)
    Rheological Rejuvenation and Structural Build-up of 3D Printed Manufactured Sand Concrete via Secondary Mixing Protocol
  16. Liu Chao, Ma Ruiyang, Liu Huawei, Dai Meiling et al. (2026-02)
    Shrinkage in Concrete Additive Manufacturing:
    A Critical Review of Mechanisms, Characterization, and Control Strategies
  17. Bong Shin, Zhao Yasong, Gao Yangyunzhi, Du Hongjian (2026-01)
    High-Volume Glass Powder Cementitious Material for Low-Carbon Concrete Additive Manufacturing
  18. Sahu Akshay, Panda Biranchi (2026-01)
    Growth Curve-Based Continuous Toolpath Design for Improving the Performance of Additively Manufactured Concrete
  19. Liu Liangchao, Liu Huawei, Ma Ruiyang, Wang Zihao et al. (2026-01)
    A Review of Carbon Capture, Utilization and Storage Technologies in Concrete Additive Manufacturing
  20. Aabbas Mohamed, Mahdaoui Mustapha, Bouchikhi Abdelhadi, Ahachad Mohammed et al. (2026-01)
    Experimental and Numerical Study of the Incorporation of Spent Coffee Grounds and Phase Change Materials in Hollow Bricks Manufactured by 3D Printing
  21. Valdez-Cano R., González-López J., De-Los-Santos E., Mendoza‐Rangel J. et al. (2026-01)
    Alternative Silica Aerogel Mortar for Improving Energy Efficiency, Thermal Comfort, and Environmental Performance in Residential Buildings Under Hot-Dry Climates Using 3D Additive Manufacturing
  22. Gil-Lopez Tomas, Amirfiroozkoohi Alireza, Valiente López María, Verdu-Vazquez Maria (2026-01)
    The Impact of 3D Printing on Mortar Strength and Flexibility:
    A Comparative Analysis of Conventional and Additive Manufacturing Techniques
  23. Lara Yamile, Gianoli Pablo, Gonzalez Elizabeth, Abreu Ana (2026-01)
    Evaluation of Additively Manufactured Acoustic Absorbing Metamaterials
  24. Kovaleva Daria, Haufe Carl, Miller Olga, Gericke Oliver et al. (2025-12)
    Lightweight and Sustainable Construction with Concrete:
    The Role of Digital Design and Manufacturing Methods at ILEK
  25. Knychalla Bruno, Wiesner Christian, Sonnleitner Patrick, Kowalczyk Magdalena et al. (2025-12)
    Integrated Fiber Forms:
    Functionally Integrated Slab Systems Through Additive Manufacturing and Natural Fiber Reinforcement
  26. Feng Xiaowei, Carvelli Valter, Pan Dongjiang, Zhu Chuankai et al. (2025-12)
    Additive Manufacturing of Hybrid Straw-Soil-Cement Materials for Enhanced Mine Models
  27. Alnaggar Mohammed (2025-12)
    Large Format Additive Manufacturing with Cementitious and Geo Materials:
    General Considerations, Drivers, and Context
  28. Teixeira João, Jesus Manuel, Ribeiro Elis, Rangel Bárbara et al. (2025-12)
    Large Format Additive Manufacturing with Cement and Clay Applications
  29. Guerrero Ana, Asensio Eloy, Fernández Fernando (2025-12)
    Large‐Format Additive Manufacturing with Cement and Clays:
    Characterization Methods
  30. Ramezani Mahyar, Kilic Ugur, Sherif Muhammad, Arce Gabriel et al. (2025-12)
    Rheological Properties and Mechanical Response of Bio-Based Graphene Enhanced Additively Manufactured Cementitious Composites
  31. Kalmykov Oleg, Reznik Petro, Furman Inna, Demianenko Ivan (2025-11)
    Experimental Testing of a Complex-Geometry Floor Slab Manufactured Using 3DCP Technology
  32. Li Chenglin, Jiao Y., Ren Kai, Liu N. et al. (2025-11)
    A Novel Pivot-Move Strategy for Dual-Robot Manipulator Additive Manufacturing:
    Enabling Collision Avoidance Without Halting Deposition
  33. Korol Ewelina, Jenta Arkadiusz, Chaudhari Ojas, Wójcik Michal (2025-11)
    Experimental Investigation of Concrete Beams Under Bending, Manufactured with 3D Additive Printing Technology
  34. Benz Hendrik, Nguyen Trong The, Klemt-Albert Katharina (2025-11)
    Real-Time Vision-Based Defect Detection for Large-Scale on-Site Earthen Additive Manufacturing:
    Annotated Dataset and Dual-Model Framework
  35. Liu Xianda, Sun Junbo, Chen Hui, Liu Chang et al. (2025-11)
    3D Printed Concrete with Red Mud Incorporation:
    Influence of Red Mud Manufacturing Procedures on Mechanical Properties at Elevated Temperatures
  36. Abidi Imene, Tuna Meral, Carboni Biagio, Trovalusci Patrizia (2025-11)
    A Parametric Study on Topology Optimization of Additively Manufactured Clay Materials
  37. Sahu Akshay, Panda Biranchi (2025-11)
    An Additive Manufacturing-Oriented Design Approach for Digital Construction
  38. Faleschini Flora, Trento Daniel, Zanini Mariano (2025-11)
    Earth as a Building Material:
    From Traditional Building Techniques to Additive Manufacturing
  39. Müller Niklas, Claßen Martin (2025-10)
    Additive Manufacturing of Topology-Optimized Lightweight Slabs Using Foam Concrete
  40. Fromm Asko, Gross Rolf, Schomann Melanie, Smogor Jagoda et al. (2025-10)
    Method of Manufacturing a Multifunctional Concrete Component
  41. Verma Shilpi, Parghi Anant (2025-10)
    Machine Learning-Based Prediction of Compressive Strength in Additive Manufacturing of Concrete Technology
  42. Ball Richard, Dams Barrie, Shepherd Paul, Chen Binling (2025-10)
    Exploring Aerial Additive Manufacturing with Cementitious Materials Using Autonomous Drones
  43. Marrero-Rosa Raul, Gomaa Shady, Irizarry Elmer, Ahmed Hassan et al. (2025-10)
    Additive Manufacturing of Ultra-High-Performance Concrete:
    From Mechanical Characterization to Large-Scale Application
  44. Biernacki Joseph (2025-10)
    Sustainability of Additively Manufactured Cement-Based Housing:
    What's Our Next Move?
  45. Lale Erol, Ayhan Bahar, Ahmed Ayesha, Irizarry Elmer et al. (2025-10)
    Computational Simulations Fresh-to-Solid Transition for Additive Manufacturing of Ultra-High-Performance Fiber Reinforced Concrete
  46. Shekhar Shashank, Kumar Manish, Mathur Rishabh (2025-10)
    Additive Manufacturing of Concrete with Low Initial Yield Strength Through Controlled Heating of Printed Layers
  47. Fahim Abdullah, Bukhari Syed, Khanzadeh Moradllo Mehdi (2025-09)
    Additive Manufacturing of Carbonatable Ternary Cementitious Systems with Cellulose Nanocrystals
  48. Lopes de Aquino Brasil Alexander, Carmo Pena (2025-09)
    A Systematic Review of Robotic Additive Manufacturing Applications in Architecture, Engineering, and Construction
  49. Yousaf Arslan, Rashid Ans, Koç Muammer (2025-09)
    Additive Manufacturing for Vernacular Architecture Using Local Earthen Soil and Bio-Waste Materials
  50. Keller Petr, Mendřický Radomír (2025-09)
    Analysis of Object Deformations Printed by Additive Manufacturing from Concrete Mixtures over Time
  51. Sahu Akshay, Sharma Deepak, Panda Biranchi (2025-09)
    Tailoring Topology-Optimized Lightweight Concrete Beam Design for Additive Manufacturing
  52. Rabiei Mahsa, Moini Mohamadreza (2025-09)
    Extrusion Under Material Uncertainty with Pressure-Based Closed-Loop Feedback Control in Robotic Concrete Additive Manufacturing
  53. Ghodke Swapnil, Singh Arshdeep, Singh Bhupinder, Chowdhury Shubhankar (2025-08)
    Additively Manufactured Smart Materials and Structures in Construction and Building Applications
  54. Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng (2025-08)
    Optimization of Building Structures Based on Additive Manufacturing:
    A Review
  55. Wagner Gabriel, Silva João, Ribeiro João, Figueiredo Bruno et al. (2025-08)
    A Novel and Flexible Approach to Modeling the Additive Manufacturing Extrusion of Cementitious Materials
  56. Maboudi Mehdi, Mawas Karam, Gerke Markus (2025-07)
    Geometric Inspection in 3D Concrete Manufacturing:
    Comparison of Data Capturing Techniques
  57. Chovghi Frederic, Richter Christiane, D'Acunto Pierluigi (2025-07)
    Fabrication-Aware Structural Form-Finding for Additive Manufacturing:
    An Equilibrium-Based Approach
  58. Zhang Chao, Ren Juanjuan, Zhang Shihao, Guo Yipu et al. (2025-07)
    Advanced Impact Resistance Design Through 3D-Printed Concrete Technology:
    Unleashing the Potential of Additive Manufacturing for Protective Structures
  59. Liang Jingwen, Zeng Zuo, Wang Penglin, Wang Zhongxu et al. (2025-07)
    Emergency Response Mobile 3D Printing System:
    A Case Study in Rapid Manufacturing of Polyurethane Foam Bridges
  60. Anop Darya, Sadenova Marzhan, Beisekenov Nail, Rudenko Olga et al. (2025-07)
    Additive Manufacturing as an Alternative to Core Sampling in Concrete Strength Assessment
  61. Wang Tongcai, Gu Guangshuai, Zhang Rihan, Cui Qianshun et al. (2025-07)
    Additive Manufacturing of Lunar Regolith via Resin-Based Binder and Material Extrusion Method for High-Performance In-Situ Manufacturing on the Moon
  62. Flor-Unda Omar, Toapanta Carlos, Fuentes Mauricio, Rivera Mario (2025-07)
    Additive Manufacturing Technologies:
    Advances for the Construction Industry
  63. Versteege Jelle, Wolfs Robert, Salet Theo (2025-06)
    Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
    Part II: Moisture and Heat
  64. Keune Anna, Simšič Živa, Kloft Harald, Dörfler Kathrin (2025-06)
    AMC Edu:
    Lab Design to Learn About Additive Manufacturing in Construction
  65. Ribeiro João, Campos Tatiana, Brandão Filipe, Figueiredo Bruno et al. (2025-06)
    3DCP Composite Systems:
    Additive Manufacturing of a Concrete and Cellulose Interlocking Wall
  66. Dai Pengfei, Luo Zhenhua, Wang Yalun, Mbabazi Justin et al. (2025-06)
    Waste Plastic Fiber Reinforced Cementitious Cavity Structures Manufactured by Mortar Extrusion 3D Printing
  67. Makul Natt (2025-06)
    Additive Manufacturing
  68. Álvarez-Fernández Martina, Guerrero-Miguel Diego-José, González-Nicieza Celestino, Prendes-Gero María et al. (2025-06)
    Mortars with Mining Tailings Aggregates:
    Implications for Additive Manufacturing
  69. Bettermann Luca, Slepicka Martin, Esser Sebastian, Borrmann André (2025-05)
    Data-Driven Parameter Calibration in Additive Manufacturing for Construction:
    An Introduction to Learning by Printing
  70. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhang Yunsheng et al. (2025-05)
    Rheological Performance Regulation and Material Optimization of Manufactured Sand Concrete in 3D Printing
  71. Safal K., Liu Han, Lopes Sousa Israel, Laflamme Simon et al. (2025-05)
    Investigation of 3D Printed Concrete for Real-Time Monitoring of Additive Manufacturing Process
  72. Casanova Euro, Hidalgo Nelson, Valdebenito Michael, Forcael Eric et al. (2025-04)
    Overturning Resistance of Concrete Curved Walls Manufactured with Additive Construction
  73. Dobrzanski James, Xu Jie, Bartek Rasti, Becker Daniel et al. (2025-04)
    From Digital Crafting to Digital Manufacturing:
    Automated Production Using Hybrid 3D Concrete Printing
  74. Li Mo, Wu Yun-Chen, Wang Xinbo (2025-04)
    Fracture Behavior of Additively Manufactured Cementitious Materials
  75. Thomsen Mette, Nicholas Paul, Chiujdea Ruxandra-Stefania, Nielsen Stine et al. (2025-04)
    Additive Manufacturing for Repair:
    Continual Construction Through Bio-Based Materials
  76. Oladunni Oluwole, Lee Carman, Ibrahim Idowu, Olanrewaju Oludolapo (2025-03)
    Advances in Sustainable Additive Manufacturing:
    A Systematic Review for Construction Industry to Mitigate Greenhouse Gas Emissions
  77. Koszela Kamila, Chajec Adrian (2025-03)
    Sustainable Additive Manufacturing:
    How the Composition of the Cementitious Mix Influences Its Fresh Properties
  78. Chai Hwa, Shiotani Tomoki (2025-03)
    Opening Letter of RILEM TC QPA:
    Quality and Performance Assurance of Additively Manufactured Cementitious Composites by Advanced Non-Invasive Techniques
  79. Meyuhas Ohad, Larianovsky Pavel, Bentur Arnon, Magdassi Shlomo et al. (2025-03)
    Methods for Earth-Based Falsework in Multi-Material Additive Manufacturing at an Architectural Scale
  80. Gardan Julien, Hedjazi Lofti, Attajer Ali (2025-02)
    Additive Manufacturing in Construction:
    State of the Art and Emerging Trends in Civil Engineering
  81. Chadha Kunaljit, Vasey Lauren, Gramazio Fabio, Kohler Matthias (2025-02)
    Adaptive Robotic Tamping:
    A Novel Robotic Method for Formative Surface Finishing in Earth-Based Additive Manufacturing
  82. Versteege Jelle, Wolfs Robert, Salet Theo (2025-02)
    Data-Driven Additive Manufacturing with Concrete - Enhancing In-Line Sensory Data with Domain Knowledge:
    Part I: Geometry
  83. Tarek Shaimaa, Mansour Yasser, Abdelmohsen Sherif, Kohail Mohamed et al. (2025-02)
    Evaluating the Role of Additive Manufacturing in Adobe Brick Enhancement:
    A Comparative Study
  84. Khan Shoukat, Koç Muammer (2025-01)
    Advancements in Additively Manufactured Safety Materials:
    Energy-Efficient 3D Printing Solutions for Critical Infrastructure
  85. Guan Jingyuan, Wang Li, Wan Qian, Ma Guowei (2025-01)
    Material and Structural Fatigue-Performance of 18m Span Reinforced Arch Structure Manufactured by 3D Printing Concrete as Permanent Formwork
  86. Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2025-01)
    Assessment of the Suitability of Carbon Long Fibers as Reinforcement for Additively Manufactured Components
  87. Richter Christiane, Maurer Christian, Jungwirth Jörg (2025-01)
    Reinforcement-Strategies for Additively Manufactured Concrete Elements:
    Exploring the Potential of Different Reinforcement-Materials for Selective Cement-Activation
  88. Roschli Alex, Post Brian, Wang Peter, Chesser Phillip et al. (2025-01)
    The Cost of Scaling-Up in Large-Format Additive Manufacturing
  89. Neef Tobias, Kalthoff Matthias, Müller Steffen, Cruz Cynthia et al. (2024-12)
    Mineral-Impregnated Carbon-Fibers-Reinforcement for Concrete Elements Manufactured by Extrusion
  90. Pham Thi, Huang Jie (2024-12)
    3D Printed Artificial Coral Reefs:
    Design and Manufacture
  91. Guan Jingyuan, Wang Li, Huang Yimiao, Ma Guowei (2024-12)
    3D Printed Concrete Composite Slabs Fabricated by Pre-Stressed Reinforced Permanent Formwork:
    Design, Manufacturing, and Performance
  92. Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
    Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
    Materials, Engineered Properties and Techniques for Additive Manufacturing
  93. Forcael Eric, Medina Moisés, Opazo-Vega Alexander, Moreno Francisco et al. (2024-11)
    Additive Manufacturing in the Construction Industry
  94. Wang Lingyu, Zhang Yu, Wang Zhiyong, Chen Juan et al. (2024-11)
    Additive Manufacturing in Construction Using Unmanned Aerial Vehicle:
    Design, Implementation, and Material-Properties
  95. Heinze Lisa, Liebringshausen Anne, Eversmann Philipp (2024-11)
    3D Printing with Wood Waste:
    Development of Reusable Printing Material Based on Waste Wood Particles and Its Digital Manufacturing Process for Wall Constructions in Architecture
  96. Vasey Lauren, Chadha Kunaljit, Kango Ananya, Leung Victor et al. (2024-11)
    Impact Printing:
    A Novel Robotic Additive Manufacturing Method for Circular, High-Volume Construction
  97. Hack Norman, Dörrie Robin, Kloft Harald (2024-11)
    Hybrid Additive Manufacturing
  98. Dams Barrie, Chen Binling, Kaya Yusuf, Shepherd Paul et al. (2024-11)
    The Rise of Aerial Additive Manufacturing in Construction:
    A Review of Material Advancements
  99. Iuorio Ornella (2024-11)
    Additive Manufacturing and Automation in Construction
  100. He Chenming, Michalatos Panagiotis, Sabin Jenny (2024-11)
    GrowFill:
    Generative Adaptive Infill for Additive Manufacturing
  101. Teng Teng, Zhi Yefan, Akbarzadeh Masoud (2024-11)
    Gradient Multimaterial Printing:
    Integrated and Tailored Thermal Insulation Through Gradient Multimaterial Additive Manufacturing for Masonry Architectural Components
  102. Rymeš Jiří, Červenka Jan, Jendele Libor, Bureš Vladislav et al. (2024-11)
    Integrating 3D Modelling and Non-Linear Numerical Simulations in Concrete Additive Manufacturing
  103. Wang Li, Lin Wenyu, Wan Qian, Li Zhijian et al. (2024-11)
    Manufacturing Accuracy Improvement of Concrete Product by Hybrid Additive-Subtractive Method Based on the Time-Dependent Characteristics of Cementitious Materials
  104. Lucas Sandra (2024-11)
    From 3D to 5D Printing:
    Additive Manufacturing of Functional Construction Materials
  105. Thomsen Mette, Tamke Martin, Rossi Gabriella, Chiujdea Ruxandra-Stefania et al. (2024-11)
    Sustainable Construction:
    Additive Manufacturing in a Circular Design Framework
  106. He Yuxiang, Robens-Radermacher Annika, Noda Sakiko, Wolf Christoph et al. (2024-11)
    Automated Workflows for Concrete Additive Manufacturing for Design, Optimization, and Fabrication of Parametrized Elements
  107. Wan Linxiaoyi, Liu Jingyang, Bard Joshua, Cupkova Dana (2024-11)
    Towards Adaptive Additive Manufacturing:
    Image-Based Monitoring for Binder Jet 3D Printing of Coarse Composite Concrete Powders
  108. Doyle Shelby, Senske Nick, Gasper Jacob, Craine Jamie et al. (2024-11)
    Luminosity, Labor, and Liability:
    Innovating Rural Spaces with Additive Manufacturing and Augmented Reality
  109. Lachmayer Lukas, Recker Tobias, Ekanayaka Virama, Hürkamp André et al. (2024-10)
    Multi-Model-Based Additive Manufacturing:
    A Framework for Automated Large-Scale 3D Concrete Printing with Industrial Robots
  110. Händle Frank (2024-10)
    Additive Manufacturing by Extrusion in Ceramics
  111. Lim Sean, Tan Ming (2024-10)
    A Rheological Model for Concrete Additive Manufacturing
  112. Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-10)
    Efficient Production of Pre-Cast Concrete Staircases Using Additive-Manufactured, Component-Integrated Formworks Systems
  113. Wysoczanski Andrzej (2024-10)
    The Use of Additively Manufactured Concrete Objects
  114. Seo Eun-A, Lee Hojae (2024-10)
    Influence of Chemical Admixtures on Buildability and Deformation of Concrete for Additive Manufacturing
  115. Raza Muhammad, Zhong Ray (2024-10)
    Integration of Additive Manufacturing, Lean and Green Construction:
    A Conceptual Framework
  116. Martin Michael, Banijamali Kasra, Gilbert Hunter, Mascareñas David et al. (2024-09)
    LiDAR-Based Real-Time Geometrical Inspection for Large-Scale Additive Manufacturing
  117. Slepicka Martin, Borrmann André (2024-09)
    Fabrication Information Modeling for Closed-Loop Design and Quality Improvement in Additive Manufacturing for Construction
  118. Asaf Ofer, Bentur Arnon, Amir Oded, Larianovsky Pavel et al. (2024-09)
    A 3D Printing Platform for Design and Manufacturing of Multi-Functional Cementitious Construction Components and Its Validation for a Post-Tensioned Beam
  119. Dounas Theodoros, Berdos Yorgos, Vele Jiří (2024-09)
    Towards a Decentralized Physical Infrastructure for Additive Manufacturing in Architecture:
    A Proof of Concept for a Tamper Proof, Secure Connection Between Designs, Blockchains and 3D Printers
  120. Nan Cristina (2024-09)
    The Computational Clay Column:
    Computational Ceramic Systems with Additive Manufacturing
  121. Meyuhas Ohad, Larianovsky Pavel, Natanian Jonathan, Sprecher Aaron (2024-09)
    Thermal and Structural Performance of Cork-Cement Composite for Additive Manufacturing
  122. Walzer Alexander, Kozlova Mariia, Yeomans Julian (2024-09)
    Printing Homes:
    Unit Cost Estimation for Additive Manufacturing in Construction
  123. Straßer Alexander, Haynack Alexander, Kränkel Thomas, Gehlen Christoph (2024-09)
    Additive Manufacturing by the Selective Paste-Intrusion:
    Effect of the Distance of the Print Nozzle to the Particle-Bed on the Print Quality
  124. Romani Alessia, Levi Marinella (2024-09)
    Large-Format Material-Extrusion Additive Manufacturing for Circular Economy Practices:
    A Focus on Product-Applications with Materials from Recycled Plastics and Biomass-Waste
  125. Reißig Silvia, Herdan Annika, Mechtcherine Viktor (2024-09)
    Rheological Behavior of Steel-Fiber-Reinforced Concrete in the Context of Additive Manufacturing
  126. Hlaváček Petr, Kolsch Nico, Zocca Andrea, Kühne Hans-Carsten et al. (2024-09)
    Additive Manufacturing of Alkali-Activated Materials by Laser-Induced Slip Casting
  127. Vasilić Ksenija (2024-09)
    Additive Manufacturing with Concrete:
    The Path to Practical Implementation
  128. Engel Sven, Hegger Josef, Claßen Martin (2024-09)
    Automated Manufacturing Process and Structural Performance of Ribbed CRC Slabs
  129. Lachmayer Lukas, Quantz Jelle, Heeren Hauke, Recker Tobias et al. (2024-09)
    A Spatial Multi-Layer Control-Concept for Strand-Geometry-Control in Robot-Based Additive Manufacturing-Processes
  130. Daneshvar Dana, Rabiei Mahsa, Gupta Shashank, Najmeddine Aimane et al. (2024-09)
    Geometric Fidelity of Interlocking Bodies in Two-Component Robotic Additive Manufacturing
  131. Colyn Markus, Babafemi Adewumi, Zijl Gideon (2024-09)
    Advancements in Sustainability of 3D Concrete Printing:
    Presenting Low-Carbon Mixtures for Additively Manufactured Concrete Structures in Practice
  132. Haghighat Negin, Mollah Md., Sannerud Stian, Boyer Julie et al. (2024-09)
    Rheology and Printability of Cement-Paste Modified with Filler from Manufactured Sand
  133. Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-09)
    Efficient Production of Reinforced Pre-Cast Concrete Elements Using Additive Manufactured, Integrated Formwork
  134. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2024-09)
    Material-Volume Reduction with Additive Manufacturing:
    Challenges for Structural Application
  135. Rangel Carolina, Salet Theo, Lucas Sandra (2024-09)
    A Framework for Crafting Sustainable Lightweight Concrete in Additive Manufacturing
  136. Thiel Charlotte, Hechtl Christian, Gehlen Christoph, Kränkel Thomas (2024-09)
    Sustainability Potential of Additive Manufactured Concrete Structures:
    Studies on the Life Cycle Assessment and Circularity of an Extruded Exterior Wall
  137. Lei Siduo, Kolawole John, Dobrzanski James, Xu Jie et al. (2024-09)
    Enhancing Surface Quality in Additive Manufacturing Applications:
    A Micro-Power Float Approach
  138. Wüchner Roland, Warnakulasuriya Suneth, Asl Reza, Bletzinger Kai-Uwe et al. (2024-09)
    Free-Form Structural Optimization for Additive Manufacturing in Construction
  139. Prihar Arjun, Gupta Shashank, Esmaeeli Hadi, Moini Mohamadreza (2024-08)
    Tough Double-Bouligand Architected Concrete Enabled by Robotic Additive Manufacturing
  140. Sahu Akshay, Panda Biranchi (2024-08)
    A TSP-Based Continuous Path-Planning for Additive Manufacturing of Concrete
  141. Carcassi Olga, Alon Lola (2024-08)
    Additive Manufacturing of Natural Materials
  142. Dahlenburg Maximilian, Tan Yuan, Li Mengxue, Ajmal Moshin et al. (2024-08)
    A Flexible and Efficient Calibration Method for Discrete Element Simulations of Additive Manufacturing in Construction
  143. Buschmann Birger, Henke Klaudius, Asshoff Carsten, Talke Daniel et al. (2024-08)
    Additive Manufacturing of Wood-Composite-Parts by Individual Layer Fabrication:
    Influence of Process Parameters on Product Properties
  144. Aghaee Kamran, Li Linfei, Roshan Alireza, Namakiaraghi Parsa (2024-08)
    Additive Manufacturing Evolution in Construction:
    From Individual Terrestrial to Collective, Aerial, and Extraterrestrial Applications
  145. Sovetova Meruyert, Calautit John (2024-07)
    Design, Calibration and Performance Evaluation of a Small-Scale 3D Printer for Accelerating Research in Additive Manufacturing in Construction
  146. Jones Kathryn, Li Mo (2024-07)
    Life Cycle Assessment of Additively Manufactured Foundations for Ultratall Wind Turbine Towers
  147. Sucharda Oldřich, Gandel Radoslav, Cmiel Petr, Jeřábek Jan et al. (2024-07)
    Utilization of High-Performance Concrete Mixtures for Advanced Manufacturing Technologies
  148. Kloft Harald, Salamatian Ali, Gosslar Joschua, Dorresteijn Evelien et al. (2024-07)
    Robotic Rammed Earth-Concrete (RREC):
    A Novel Additive Manufacturing Technology to Strengthen Rammed Earth Structures by Integrated Rammed Concrete Parts
  149. Geng Zifan, Zhang Lizhi, Wu Zhiwen, Tay Yi et al. (2024-07)
    Mechanical Properties and Additive Manufacturing of Alkali-Activated Lunar Regolith in Artificial Lunar Environments
  150. Gleiser Leonie, Pierer Robin, Markin Slava, Butler Marko et al. (2024-07)
    Additive Manufacturing with Earth-Based Materials:
    Minimization of Shrinkage Deformation
  151. Babovic Neira, Laghi Vittoria, Kloft Harald (2024-07)
    Branching Structure for Reinforcement Anchorage Produced with Wire and Arc Additive Manufacturing Technique
  152. Trento Daniel, Faleschini Flora, Masoomi Maryam, Pellegrino Carlo et al. (2024-07)
    Additive Manufacturing for Earth-Based Materials:
    An Experimental Investigation
  153. Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2024-07)
    CO2-Driven Additive Manufacturing of Sustainable Steel-Slag-Mortars
  154. Parrott Brian, Coronado Preciado Angelica, Feron Eric (2024-07)
    Selective Sheet-Extrusion:
    A Novel Manufacturing-Process for Large-Format Material-Extrusion
  155. Ivaniuk Egor, Tošić Zlata, Müller Steffen, Lordick Daniel et al. (2024-07)
    Automated Manufacturing of Reinforced Modules of Segmented Shells Based on 3D Printing with Strain-Hardening Cementitious Composites
  156. Bai Meiyan, Xiao Jianzhuang, Shen Jianyu, Ding Tao et al. (2024-07)
    Printability and Mechanical Anisotropy of 3D Printed Concrete with Manufactured Sand Derived from Basalt
  157. Sadoughi Arezou, Kouhirostami Maryam, Kouhirostamkolaei Mahtab, Qi Bing et al. (2024-06)
    Autonomous Building Design for Manufacturing and Assembly:
    A Systematic Review of Design Application, Challenges, and Opportunities
  158. Bong Shin, Du Hongjian (2024-06)
    Sustainable Additive Manufacturing of Concrete with Low-Carbon Materials
  159. Quintana-Ruiz Osvaldo, Campello Eduardo (2024-06)
    DEM Modeling of Advanced Manufacturing Technologies:
    From SLS to 3D Concrete Printing
  160. Krishna R., Rehman Asif, Mishra Jyotirmoy, Saha Suman et al. (2024-06)
    Additive Manufacturing of Geopolymer Composites for Sustainable Construction:
    Critical Factors, Advancements, Challenges, and Future Directions
  161. Assunção Badan Julie, Chadha Kunaljit, Vasey Lauren, Brumaud Coralie et al. (2024-06)
    Contribution of Production Processes in Environmental Impact of Low-Carbon Materials Made by Additive Manufacturing
  162. Masoud Laith, Hammoud Ahmad, Mortada Youssef, Masad Eyad (2024-06)
    Rheological, Mechanical, and Microscopic Properties of Polypropylene-Fiber-Reinforced Geopolymer Concrete for Additive Manufacturing
  163. Spencer Lawson, Genedy Moneeb, Strait James, Nair Sriramya et al. (2024-06)
    Concrete Gyroid:
    An Additive Manufacturing (AM) Method to 3D Print Gyroid Geometries with a Cementitious Material
  164. Romario Yulius, Bhat Chinmai, Ramezani Maziar, Jiang Cho-Pei (2024-06)
    Marine-Waste-Management of Oyster-Shell-Waste as Reinforcement for Clay Additive Manufacturing Components
  165. Espinosa Simon, Slepicka Martin, Borrmann André (2024-06)
    Integration of Laser Profiler Feedback into FIM for Additive Manufacturing in Construction
  166. Lachmayer Lukas, Dittrich Lars, Recker Tobias, Dörrie Robin et al. (2024-06)
    In-Line Image-Based Reinforcement Detection for Concrete Additive Manufacturing Processes Using a Convolutional Neural Network
  167. Los Angeles Ortega Rosario Maria, Medina Melany, Duque Rafael, Alberto Jaén Ortega Antonio et al. (2024-05)
    Advancing Sustainable Construction:
    Insights into Clay-Based Additive Manufacturing for Architecture, Engineering, and Construction
  168. Stout Ivy, Godfrey Grant, Dayley Jenna, Rodriguez Dexter et al. (2024-05)
    Concrete Mixture Properties and Designs for Additive Manufacturing:
    A Review of 3D Concrete Printing
  169. Lyu Qifeng, Wang Yalun, Dai Pengfei (2024-05)
    Multilayered Plant-Growing Concrete Manufactured by Aggregate-Bed 3D Concrete Printing
  170. Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wang Yufei et al. (2024-04)
    Artificial Intelligence Powered Real-Time Quality Monitoring for Additive Manufacturing in Construction
  171. Laghi Vittoria, Shakor Pshtiwan, Panda Biranchi, Gasparini Giada (2024-04)
    Editorial:
    Additive Manufacturing in Construction
  172. Matus Ilse, Alves Jorge, Góis Joaquim, Vaz-Pires Paulo et al. (2024-04)
    Artificial Reefs Through Additive Manufacturing:
    A Review of Their Design, Purposes and Fabrication Process for Marine Restoration and Management
  173. Hitzegrad Jan, Brohmann Leon, Herding Friedrich, Pfennings Kai et al. (2024-04)
    Surfaces of Coastal Biogenic Structures:
    Exploiting Advanced Digital Design and Fabrication-Strategies for the Manufacturing of Oyste-Reef- and Mussel-Bed-Surrogates
  174. Ahmed Hassan, Giwa Ilerioluwa, Game Daniel, Arce Gabriel et al. (2024-04)
    Automated Reinforcement During Large-Scale Additive Manufacturing:
    Structural-Assessment of a Dual Approach
  175. Fleckenstein Julia, Knychalla Bruno, Briels David, Baghdadi Abtin et al. (2024-04)
    BREUER × AM:
    Functional Hybridisation in Concrete Building Envelope Elements through Additive Manufacturing
  176. Akhnoukh Amin, Campbell Mathew (2024-04)
    Shoreline Resilience Through Advanced Manufacturing
  177. Mechtcherine Viktor, Kuhn Alexander, Mai (née Dressler) Inka, Nerella Venkatesh et al. (2024-03)
    Additive Manufacturing with Concrete:
    Guidelines for Planning and Implementing Projects
  178. Wu Yun-Chen, Wang Xinbo, Li Mo (2024-03)
    Role of Thixotropy in Inter-Layer Microstructure and Properties of Additively Manufactured Cementitious Materials
  179. Dams Barrie, Chen Binling, Kaya Yusuf, Orr Lachlan et al. (2024-03)
    Fresh Properties and Autonomous Deposition of Pseudoplastic Cementitious Mortars for Aerial Additive Manufacturing
  180. Zhou Yiyi, Luo Haoran, Anand Kamal, Singh Amardeep et al. (2024-02)
    Sustainable Use of Ultrafine Recycled Glass in Additive Manufactured Reactive-Powder Concrete
  181. Kakarla Akesh, Kong Ing, Patel Vipulkumar (2024-02)
    Additive Manufacturing for Building and Constructions
  182. Silva Maicon, Silva Lívia, Toralles Berenice, Cardoso Flávia et al. (2024-02)
    Building a Sustainable Future:
    The Role of Additive Manufacturing in Civil Construction
  183. Korniejenko Kinga, Gądek Szymon, Dynowski Piotr, Tran Doan et al. (2024-02)
    Additive Manufacturing in Underwater Applications
  184. Bianchi Iacopo, Volpe Stelladriana, Fiorito Francesco, Forcellese Archimede et al. (2024-01)
    Life Cycle Assessment of Building Envelopes Manufactured Through Different 3D Printing Technologies
  185. Raut Jayant, Pimpalshende Anjusha, Chandak Mayuri, Patil Tejas et al. (2024-01)
    A Novel Multi-Method Framework for 3D Printed Fiber-Reinforced Polymer Concrete Utilizing Advance Additive Manufacturing Techniques
  186. Zhang Ketao, Chermprayong Pisak, Xiao Feng, Tzoumanikas Dimos et al. (2024-01)
    Aerial Additive Manufacturing with Multiple Autonomous Robots:
    Correction
  187. Prihar Arjun, Garlock Maria, Najmeddine Aimane, Moini Mohamadreza (2024-01)
    Mechanical Performance of Sinusoidally Architected Concrete Enabled by Robotic Additive Manufacturing
  188. Altıparmak Sadettin, Daminabo Samuel (2024-01)
    Suitability-Analysis for Extrusion-Based Additive Manufacturing Process
  189. Wan Zhi, Xu Yading, He Shan, Schlangen Erik et al. (2024-01)
    The Use of Additive Manufacturing in Self-Healing Cementitious Materials:
    A State of the Art Review
  190. Chadha Kunaljit, Dubor Alexandre, Cabay Edouard, Tayoun Yara et al. (2024-01)
    Additive Manufacturing for the Circular Built Environment:
    Towards Circular Construction with Earth-Based Materials
  191. Rocha Douglas, Faria Paulina, Lucas Sandra (2023-12)
    Additive Manufacturing of Earth-Based Materials:
    A Literature Review on Mortar-Composition, Extrusion, and Processing Earth
  192. Schwartz Thibault (2023-12)
    HAL Robotics:
    From Automated Architectural Design for Fabrication, to Architecting Automated Manufacturing Systems
  193. Kaya Yusuf, Orr Lachlan, Kocer Basaran, Kovac Mirko (2023-12)
    Aerial Repair and Aerial Additive Manufacturing
  194. Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
    Powder-Bed Additive Manufacturing
  195. Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
    Concrete Additive Manufacturing
  196. Panda Biranchi, Shakor Pshtiwan, Laghi Vittoria (2023-12)
    Shotcrete Additive Manufacturing
  197. Panda Biranchi, Shakor Pshtiwan, Lagaros Nikos (2023-12)
    Advanced Modelling for Additive Manufacturing in Construction
  198. Reißig Silvia, Bedolla Carolin, Meyer Tamara, Mechtcherine Viktor (2023-12)
    Rheological Behavior of Fiber-Reinforced LC3 Fine-Grained Concrete in the Context of Additive Manufacturing
  199. Straßer Alexander, Kränkel Thomas, Gehlen Christoph (2023-12)
    Integrating Wire Arc Additive Manufacturing into Selective Paste-Intrusion for Reinforced Concrete Elements:
    Effect of Temperature on the Mechanical Performance
  200. Hechtl Christian, Kränkel Thomas, Gehlen Christoph (2023-12)
    Near‐Nozzle Mixing for Additive Manufacturing of Cementitious Mortar:
    A Homogeneity Study
  201. Lindner Marco, Gliniorz Ralf, Männel Mike, Garbe Daniel et al. (2023-12)
    Tool-Developments for Additive Manufacturing-Processes with Anchor for the Modern Flow-Production
  202. Funke Henrik, Lindner Marco, Rudolph Enrico, Gelbrich Sandra (2023-12)
    Additive Manufacturing Technology for the Continuous Production of Precision Concrete Elements
  203. Nóbrega Thiers, Henriques Gonçalo, Passaro Andres (2023-12)
    3D Printing for Architecture:
    Organic Integration of Algorithm, Machine and Material-Paste-Manufacture
  204. Dams Barrie, Shepherd Paul, Ball Richard (2023-11)
    Development and Performance Evaluation of Fibrous Pseudoplastic Quaternary Cement Systems for Aerial Additive Manufacturing
  205. Peralta Abadi Patricia, Ahmad Muhammad, Smarsly Kay (2023-11)
    Printing-Information-Modeling for Additive Manufacturing of Concrete Structures
  206. Zhu Wenxuan, Zhu Shidong, Li Wangxin, Zhang Yu et al. (2023-11)
    A Study on the Printability of Manufactured Sand Concrete
  207. Benros Deborah, Hashemi Arman, Yungshen Su, Dungrani Mohan (2023-11)
    Micro-House Using Robotic Manufacturing
  208. Eversmann Philipp, Rossi Andrea (2023-11)
    Towards Construction 4.0:
    Computational Circular Design and Additive Manufacturing for Architecture Through Robotic Fabrication with Sustainable Materials and Open-Source Tools
  209. Henschen Jacob, Blood Daniel, Kawashima Shiho, Kirkvold Heather (2023-11)
    Teaching Additive Manufacturing with Consideration for Cementitious Materials
  210. Friese Danny, Hahn Lars, Le Xuan Hung, Mersch Johannes et al. (2023-10)
    Robot-Assisted Manufacturing Technology for 3D Non-Metallic Reinforcement Structures in the Construction Applications
  211. Lyu Qifeng, Dai Pengfei, Chen Anguo (2023-10)
    Mechanical Strengths and Optical Properties of Translucent Concrete Manufactured by Mortar-Extrusion 3D Printing with Polymethyl-Methacrylate Fibers
  212. Taher Ammar, Aşut Serdar, Spoel Willem (2023-10)
    An Integrated Workflow for Designing and Fabricating Multi-Functional Building Components Through Additive Manufacturing with Clay
  213. Yang Wenwei, Wang Li, Hu Yuanyuan, Sanjayan Jay et al. (2023-10)
    An Integrated Topology-Optimization Method Including Manufacturing-Constraints for 3D Printed Fiber-Reinforced Concrete Structures
  214. Briels David, Renz Mauritz, Nouman Ahmad, Straßer Alexander et al. (2023-10)
    Monolithic AM Façade:
    Multi-Objective Parametric Design-Optimization of Additively Manufactured Insulating Wall Elements
  215. Rothe Tom, Hühne Christian, Gantner Stefan, Hack Norman (2023-10)
    Dynamic Winding Process of Individualized Fiber-Reinforcement Structures for Additive Manufacturing in Construction
  216. Bumanis Girts, Sapata Alise, Šinka Māris, Spuriņa Ella et al. (2023-10)
    Additive Manufacturing of Lightweight Gypsum and Expanded Polystyrene Granulate Composite
  217. Mallikarjuna Balichakra, Hareeswar M., Sharath P. (2023-09)
    Applications of Additive Manufacturing in Construction and Building Industries
  218. Routray Krutika, Saha Sunirmal (2023-09)
    The Economic Impact of Additive Manufacturing Industries
  219. Slepicka Martin, Mawas Karam, Borrmann André, Maboudi Mehdi et al. (2023-09)
    Digital Twinning in Additive Manufacturing:
    Closing the Digital-Physical-Digital Loop by Automated Integration of Captured Geometric Data into Fabrication Information Models
  220. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2023-09)
    Anisotropic Properties of Additively Manufactured Concrete Elements
  221. Fleckenstein Julia, Bertagna Federico, Piccioni Valeria, Fechner Mareen et al. (2023-09)
    Revisiting Breuer Through Additive Manufacturing:
    Passive Solar-Control-Design-Strategies for Bespoke Concrete Building Envelope Elements
  222. Jewett Jackson, Carstensen Josephine (2023-09)
    Topology-Optimization for Material-Extrusion-Based Additive Manufacturing-Processes with Weak Bead Bonding
  223. Ospina Salazar Ana, Valencia Isaza Andrés, Restrepo Montoya José, Mejía Arcila Johanna et al. (2023-09)
    Upcycling Fly-Ash, Red-Clay-Brick Waste, and Paper-Sludge as Feedstock for Manufacturing a Lightweight Extruded Composite:
    Design and Characterization
  224. Otto Jens, Mischke Janik (2023-09)
    Operational and Occupational Safety When Using Automated Manufacturing Processes on Construction Sites:
    Consideration of Current Legal and Technical Framework Conditions
  225. Lachmayer Lukas, Müller Nico, Herlyn Thilo, Raatz Annika (2023-08)
    Volume Flow-Based Process-Control for Robotic Additive Manufacturing-Processes in Construction
  226. Pedrosa Ana, Gaspar Florindo (2023-08)
    Rheology-Assessment of Mortar-Materials for Additive Manufacturing
  227. Surehali Sahil, Tripathi Avinaya, Neithalath Narayanan (2023-08)
    Anisotropy in Additively Manufactured Concrete Specimens Under Compressive Loading:
    Quantification of the Effects of Layer-Height and Fiber-Reinforcement
  228. Chougan Mehdi, Kheetan Mazen, Ghaffar Seyed (2023-07)
    Additive Manufacturing and the Construction Industry
  229. Villaquirán-Caicedo Mónica, Fernández-González Alejandro, Fernández-García Daniel, Gutiérrez Ruby (2023-07)
    Valorization of a Low-Quality Coal-Ash, in the Preparation of Alkali-Activated Inks for Applications in 3D Additive Manufacturing
  230. Armstrong Kristina, Kamath Dipti, Zhao Xianhui, Rencheck Mitchell et al. (2023-07)
    Life Cycle Cost, Energy, and Carbon Emissions of Molds for Pre-Cast Concrete:
    Exploring the Impacts of Material-Choices and Additive Manufacturing
  231. Placzek Gerrit, Schwerdtner Patrick (2023-07)
    Concrete Additive Manufacturing in Construction:
    Integration Based on Component-Related Fabrication-Strategies
  232. Mohiuddin Rafay, Cruz Policroniades Miranda, Slepicka Martin, Borrmann André (2023-07)
    Optical Process-Control for Extrusion-Based Additive Manufacturing-Methods in Construction
  233. Kazemian Ali, Giwa Ilerioluwa, Ekenel Mahmut (2023-06)
    Large-Scale Additive Manufacturing for Automated Construction:
    An Overview
  234. Riaz Raja, Usman Muhammad, Ali Ammar, Majid Usama et al. (2023-06)
    Inclusive Characterization of 3D Printed Concrete in Additive Manufacturing:
    A Detailed Review
  235. Schönsee Eric, Hüsken Götz, Jeyifous Olubunmi, Mezhov Alexander et al. (2023-06)
    Calculating Rheological Properties of Fresh Mortar for Additive Manufacturing Based on Experimental, Multi-Sensor Data
  236. Mortada Youssef, Masad Eyad, Kogbara Reginald, Mansoor Bilal et al. (2023-06)
    Development of Ca(OH)2-Based Geopolymer for Additive Manufacturing Using Construction Wastes and Nano-Materials
  237. Jones Kathryn, Li Mo (2023-06)
    Life Cycle Assessment of Ultra-Tall Wind Turbine Towers Comparing Concrete Additive Manufacturing to Conventional Manufacturing
  238. Neef Tobias, Dittel Gözdem, Scheurer Martin, Gries Thomas et al. (2023-06)
    Utilizing Textiles as Integrated Formwork for Additive Manufacturing with Concrete
  239. Kokare Samruddha, Oliveira João, Godina Radu (2023-05)
    Life Cycle Assessment of Additive Manufacturing Processes:
    A Review
  240. Lyu Qifeng, Dai Pengfei, Chen Anguo (2023-05)
    Sandwich-Structured Porous Concrete Manufactured by Mortar-Extrusion and Aggregate-Bed 3D Printing
  241. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Šeta Berin et al. (2023-05)
    Computational Analysis of Yield-Stress-Buildup and Stability of Deposited Layers in Material-Extrusion Additive Manufacturing
  242. Hanifa Mohamad, Figueiredo Bruno, Mendonça Paulo (2023-04)
    Additive Manufacturing Earth-Based Composite:
    Strategical and Computational Methodology for Building-Shell-Geometries
  243. Fan Dingqiang, Zhu Jinyun, Fan Mengxin, Lu Jianxian et al. (2023-04)
    Intelligent Design and Manufacturing of Ultra-High-Performance Concrete:
    A Review
  244. Simedru Alexandru, Becze Anca, Cadar Oana, Scurtu Daniela et al. (2023-04)
    Structural Characterization of Several Cement-Based Materials Containing Chemical Additives with Potential Application in Additive Manufacturing
  245. Fischer Oliver, Bos Freek (2023-04)
    Additive Manufacturing in Concrete Construction:
    Ways to Implement It in Engineering Practice
  246. Valente Marco, Sambucci Matteo, Chougan Mehdi, Ghaffar Seyed (2023-04)
    Composite Alkali-Activated Materials with Waste-Tire-Rubber Designed for Additive Manufacturing:
    An Eco-Sustainable and Energy Saving Approach
  247. Panda Biranchi, Tran Jonathan (2023-03)
    Material-Design, Additive Manufacturing, and Performance of Cement-Based Materials
  248. Ekanayaka Virama, Hürkamp André (2023-03)
    Implementation of a Surrogate-Model for a Novel Path‐Based Finite-Element-Simulation for Additive Manufacturing-Processes in Construction
  249. Bajpayee Aayushi, Farahbakhsh Mehdi, Zakira Umme, Pandey Aditi et al. (2023-03)
    In-Situ Resource Utilization and Reconfiguration of Soils into Construction Materials for the Additive Manufacturing of Buildings
  250. Nair Avinash, Aditya S., Adarsh R., Nandan M. et al. (2023-03)
    Additive Manufacturing of Concrete:
    Challenges and Opportunities
  251. Tuvayanond Wiput, Prasittisopin Lapyote (2023-02)
    Design for Manufacture and Assembly of Digital Fabrication and Additive Manufacturing in Construction:
    A Review
  252. Baghdadi Abtin, Ledderose Lukas, Ameri Shaghayegh, Kloft Harald (2023-02)
    Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of Robotic CNC Manufacturing Technique
  253. Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki (2023-01)
    Mechanical Properties of Fiber-Reinforced Cementitious Composites Manufactured Using 3D Printing Technology
  254. Parisi Fabio, Sangiorgio Valentino, Parisi Nicola, Mangini Agostino et al. (2023-01)
    A New Concept for Large Additive Manufacturing in Construction:
    Tower-Crane-Based 3D Printing Controlled by Deep-Reinforcement-Learning
  255. Kloft Harald, Schmitz Linus, Müller Christoph, Laghi Vittoria et al. (2023-01)
    Experimental Application of Robotic Wire and Arc Additive Manufacturing-Technique for Strengthening the I-Beam Profiles
  256. Poudelet Louison, Molina Miguel, Calvo Laura, Cardona Roger et al. (2023-01)
    Comparison Between Mono- and Bi-Component Extruders in Concrete Additive Manufacturing
  257. Baghdadi Abtin, Heristchian Mahmoud, Ledderose Lukas, Kloft Harald (2023-01)
    Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of the Robotic Subtractive Manufacturing Technique
  258. Dams Barrie, Chen Binling, Shepherd Paul, Ball Richard (2023-01)
    Development of Cementitious Mortars for Aerial Additive Manufacturing
  259. Shanmugan S., Sandhyarani T., Palani Subbaiya (2022-12)
    Development of 3D Concrete Printing Using Additive Manufacturing Processes for Construction and Building Industry
  260. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2022-12)
    Earth-Based Additive Manufacturing:
    A Field-Oriented Methodology for Evaluating Material-Printability
  261. Larikova Iuliia, Fleckenstein Julia, Chokhachian Ata, Auer Thomas et al. (2022-12)
    Additively Manufactured Urban Multispecies Façades for Building Renovation
  262. Cao Xiangpeng, Yu Shiheng, Wu Shuoli, Cui Hongzhi (2022-11)
    Experimental Study of Hybrid Manufacture of Printing and Cast-in-Process to Reinforce 3D Printed Concrete
  263. Baek Seoung-Ho, Yang Jung-Ho, Ha Cheol-Woo, Shim Patrick et al. (2022-11)
    Design and Evaluation of Additive Manufactured Highly Efficient Inclined-Wing-Type Continuous Mixer
  264. Kan Deyuan, Liu Guifeng, Cao Shuang, Chen Zhengfa et al. (2022-11)
    Mechanical Properties and Pore-Structure of Multi-Walled Carbon-Nano-Tube-Reinforced Reactive Powder-Concrete for Three-Dimensional Printing Manufactured by Material-Extrusion
  265. Lachmayer Lukas, Böhler David, Freund Niklas, Mai (née Dressler) Inka et al. (2022-11)
    Modelling the Influence of Material and Process Parameters on Shotcrete 3D Printed Strands:
    Cross-Section Adjustment for Automatic Robotic Manufacturing
  266. Dörrie Robin, Laghi Vittoria, Arrè Lidiana, Kienbaum Gabriela et al. (2022-10)
    Combined Additive Manufacturing Techniques for Adaptive Coastline Protection Structures
  267. Hahlbrock David, Braun Michael, Heidel Robin, Lemmen Patrik et al. (2022-10)
    Cable Robotic 3D Printing:
    Additive Manufacturing on the Construction Site
  268. Guanziroli Stefano, Marcucci Andrea, Negrini Alberto, Ferrara Liberato et al. (2022-10)
    A New Concept of Additive Manufacturing for the Regeneration of Existing Tunnels
  269. Kalthoff Matthias, Raupach Michael, Matschei Thomas (2022-09)
    Investigation of Rheological Test-Methods for the Suitability of Mortars for Manufacturing of Textile-Reinforced Concrete Using a Laboratory Mortar-Extruder:
    LabMorTex
  270. Zhang Ketao, Chermprayong Pisak, Xiao Feng, Tzoumanikas Dimos et al. (2022-09)
    Aerial Additive Manufacturing with Multiple Autonomous Robots
  271. Kloft Harald, Dörfler Kathrin, Bährens Meike, Dielemans Gido et al. (2022-09)
    The Research Infrastructure of the SFB TRR 277 AMC:
    Additive Manufacturing in Construction
  272. Mortada Youssef, Mohammad Malek, Mansoor Bilal, Grasley Zachary et al. (2022-09)
    Development of Test-Methods to Evaluate the Printability of Concrete Materials for Additive Manufacturing
  273. Mir Namra, Khan Shoukat, Kul Anil, Şahin Oğuzhan et al. (2022-08)
    Life Cycle Assessment of Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
  274. Lee Dongyoun, Hong Junho (2022-08)
    Development of an Adaptive Slicing Algorithm of Laminated Object Manufacturing Based 3D Printing for Freeform Formwork
  275. Riegger Felix, Zäh Michael (2022-08)
    Additive Manufacturing of Steel-Reinforcements:
    Integration of WAAM Reinforcements in Particle-Bed 3D Printing with Selective Cement-Paste-Intrusion
  276. Raza Muhammad, Zhong Ray (2022-08)
    A Sustainable Roadmap for Additive Manufacturing Using Geopolymers in Construction Industry
  277. Boukhelf Fouad, Sebaibi Nassim, Boutouil Mohamed, Yoris-Nobile Adrian et al. (2022-07)
    On the Properties Evolution of Eco-Material Dedicated to Manufacturing Artificial Reef via 3D Printing:
    Long-Term Interactions of Cementitious Materials in the Marine Environment
  278. Peralta Abadi Patricia, Smarsly Kay (2022-07)
    Requirements-Analysis of Additive Manufacturing for Concrete Printing:
    A Systematic Review
  279. Briels David, Kollmannsberger Stefan, Leithner Felicitas, Matthäus Carla et al. (2022-07)
    Thermal Optimization of Additively Manufactured Lightweight Concrete Wall Elements with Internal Cellular Structure through Simulations and Measurements
  280. Tao Yaxin, Ren Qiang, Lesage Karel, Tittelboom Kim et al. (2022-07)
    Shape Stability of 3D Printable Concrete with River and Manufactured Sand Characterized by Squeeze Flow
  281. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-07)
    The Theory of Critical Distances to Perform the Static Assessment of 3D Printed Concrete Weakened by Manufacturing-Defects and Cracks
  282. Aziz Saqib, Kim Ji-Su, Stephan Dietmar, Gengnagel Christoph (2022-06)
    Generative Structural Design:
    A Cross-Platform Design and Optimization Workflow for Additive Manufacturing
  283. Dielemans Gido, Lachmayer Lukas, Recker Tobias, Atanasova Lidia et al. (2022-06)
    Mobile Additive Manufacturing:
    A Case Study of Clay Formwork for Bespoke In-Situ Concrete Construction
  284. Bos Derk, Wolfs Robert (2022-06)
    Automated Visual Inspection of Near-Nozzle Droplet-Formation for Quality-Control of Additive Manufacturing
  285. Favier Aurélie, Petit Agnès (2022-06)
    Strategies for Reducing the Environmental Footprint of Additive Manufacturing via Sprayed Concrete
  286. Gantner Stefan, Rennen Philipp, Rothe Tom, Hühne Christian et al. (2022-06)
    Core Winding:
    Force-Flow-Oriented Fiber-Reinforcement in Additive Manufacturing with Concrete
  287. Lachmayer Lukas, Dörrie Robin, Kloft Harald, Raatz Annika (2022-06)
    Process-Control for Additive Manufacturing of Concrete Components
  288. Ekanayaka Virama, Lachmayer Lukas, Raatz Annika, Hürkamp André (2022-06)
    Approach to Optimize the Inter-Layer Waiting Time in Additive Manufacturing with Concrete Utilizing FEM Modeling
  289. Bi Minghao, Tran Jonathan, Xia Lingwei, Ma Guowei et al. (2022-06)
    Topology-Optimization for 3D Concrete Printing with Various Manufacturing-Constraints
  290. Weger Daniel, Talke Daniel, Lowke Dirk, Henke Klaudius et al. (2022-06)
    Additive Manufacturing of Free-Formed Concrete Elements by Selective Binding with Calcium Silicate-Based Cements
  291. Dörfler Kathrin, Dielemans Gido, Lachmayer Lukas, Recker Tobias et al. (2022-06)
    Additive Manufacturing Using Mobile Robots:
    Opportunities and Challenges for Building Construction
  292. Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
    Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
    A Review
  293. Lachmayer Lukas, Recker Tobias, Dielemans Gido, Dörfler Kathrin et al. (2022-05)
    Autonomous Sensing and Localization of a Mobile Robot for Multi-Step Additive Manufacturing in Construction
  294. Nistler Maximilian, Kovaleva Daria, Tepper Louis, Blandini Lucio et al. (2022-05)
    Camera-Based Process Monitoring for Powder-Bed Additive Manufacturing in Construction
  295. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-05)
    The Theory of Critical Distances to Assess the Effect of Cracks & Manufacturing-Defects on the Static Strength of 3D Printed Concrete
  296. Geng Zifan, Pan Hao, Zuo Wenqiang, She Wei (2022-05)
    Functionally Graded Lightweight Cement-Based Composites with Outstanding Mechanical Performances via Additive Manufacturing
  297. Gran Erik, Madrid Javier, Ortega Guillermo, Tenorio Ríos José et al. (2022-05)
    Conceptual Study and Literature Review of Integration of Lean Manufacturing and 3D Printing in Construction to Support Sustainability
  298. Kuzmenko Kateryna, Ducoulombier Nicolas, Féraille Adélaïde, Roussel Nicolas (2022-05)
    Environmental Impact of Extrusion-Based Additive Manufacturing:
    Generic Model, Power-Measurements and Influence of Printing-Resolution
  299. Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2022-04)
    Early-Age Buildability-Rheological Properties Relationship in Additively Manufactured Cement-Paste Hollow Cylinders
  300. Bi Minghao, Xia Lingwei, Tran Jonathan, Li Zhi et al. (2022-04)
    Continuous Contour-Zigzag Hybrid Tool-Path for Large-Format Additive Manufacturing
  301. Ignatova Elena, Kirichek Pavel (2022-04)
    Additive Manufacturing Based on Building Information-Model-Data
  302. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2022-04)
    A Grammar-Based Algorithm for Tool-Path-Generation:
    Compensating for Material-Deformation in the Additive Manufacturing of Concrete
  303. Bong Shin, Nematollahi Behzad, Xia Ming, Ghaffar Seyed et al. (2022-04)
    Properties of Additively Manufactured Geopolymer Incorporating Mineral-Wollastonite-Micro-Fibers
  304. Buswell Richard, Xu Jie, Becker Daniel, Dobrzanski James et al. (2022-04)
    Geometric Quality Assurance for 3D Concrete Printing and Hybrid Construction Manufacturing Using a Standardised Test Part for Benchmarking Capability
  305. Stieler David, Schwinn Tobias, Menges Achim (2022-03)
    Automated Modularization for Precast Elements from Additively Manufactured Formwork
  306. Afarani Hajar, Moser Newell, Garboczi Edward, Esfahani Ebrahim et al. (2022-03)
    Print Fidelity Metrics for Additive Manufacturing of Cement-Based Materials
  307. Bos Freek, Menna Costantino, Pradena Mauricio, Kreiger Eric et al. (2022-03)
    The Realities of Additively Manufactured Concrete Structures in Practice
  308. Filho Fernando, Chen Yu, Çopuroğlu Oğuzhan (2022-03)
    Nano-Modification in Digital Manufacturing of Cementitious Composites
  309. Lachmayer Lukas, Recker Tobias, Raatz Annika (2022-03)
    Contour-Tracking-Control for Mobile Robots Applicable to Large-Scale Assembly and Additive Manufacturing in Construction
  310. Peerzada Abdul, Rangaraju Prasad, Roberts James, Biehl Adam (2022-03)
    Influence of External Vibration on the Gravitational Flow Characteristics of Cementitious Materials:
    A Perspective from Application in Additive Manufacturing
  311. Mechtcherine Viktor, Taubert Markus, Müller Steffen, Will Frank et al. (2022-03)
    Additive Manufacturing of Monolithic, Steel-Reinforced Concrete Walls Using CONPrint3D-Reinforced Methods
  312. Ali Md., Issayev Gani, Shehab Essam, Sarfraz Shoaib (2022-02)
    A Critical Review of 3D Printing and Digital Manufacturing in Construction Engineering
  313. Meisel Nicholas, Watson Nathan, Bilén Sven, Duarte José et al. (2022-02)
    Design and System Considerations for Construction-Scale Concrete Additive Manufacturing in Remote Environments via Robotic-Arm-Deposition
  314. Liu Junli, Nguyen Vuong, Panda Biranchi, Fox Kate et al. (2022-02)
    Additive Manufacturing of Sustainable Construction Materials and Form-Finding Structures:
    A Review on Recent Progresses
  315. Bakar Muhammad, Saude Nasuha, Ibrahim Mustaffa, Ismail Nur (2022-01)
    Additive Manufacturing:
    A Review of Current 3D Concrete Printing on Materials, Methods, Applications, Properties and Challenges
  316. Gomaa Mohamed, Jabi Wassim, Soebarto Veronica, Xie Yi (2022-01)
    Digital Manufacturing for Earth Construction:
    A Critical Review
  317. Asprone Domenico, Menna Costantino, Bos Freek, Mata-Falcón Jaime et al. (2022-01)
    Structural Design and Testing of Digitally Manufactured Concrete Structures
  318. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Pedersen David et al. (2022-01)
    Numerical Predictions of Bottom-Layer-Stability in Material-Extrusion Additive Manufacturing
  319. Pasco Jubert, Lei Zhen, Aranas Clodualdo (2022-01)
    Additive Manufacturing in Off-Site Construction:
    Review and Future Directions
  320. Geng Zifan, Wu Peipei, Pan Hao, Zheng Qi et al. (2022-01)
    Robust Layer Interface in Cement Additive Manufacturing via Silicate-Penetration and Precipitation
  321. Jones Scott, Hipp Julie, Allen Andrew, Gagnon Cedric (2021-12)
    Rheology and Microstructure Development of Hydrating-Tricalcium-Silicate:
    Implications for Additive Manufacturing in Construction
  322. Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2021-12)
    Open-Span Printing Method for Assessment of Early-Age Deformations of Additively Manufactured Cement-Based Materials Using an Isosceles Triangle
  323. Rutzen Matthias, Schulz Michael, Moosburger-Will Judith, Lauff Philipp et al. (2021-11)
    3D Printing as an Automated Manufacturing Method for a Carbon-Fiber-Reinforced Cementitious Composite with Outstanding Flexural Strength (105 N/mm²)
  324. Lachmayer Lukas, Ekanayaka Virama, Hürkamp André, Raatz Annika (2021-11)
    Approach to an Optimized Printing Path for Additive Manufacturing in Construction Utilizing FEM Modeling
  325. Giudice Lorenzo, Wróbel Rafał, Katsamakas Antonios, Leinenbach Christian et al. (2021-11)
    Physical Modelling of Reinforced Concrete at a 1:40-Scale Using Additively Manufactured Reinforcement Cages
  326. Pajonk Adam, Prieto Alejandro, Blum Ulrich, Knaack Ulrich (2021-11)
    Multi-Material Additive Manufacturing in Architecture and Construction:
    A Review
  327. Rennen Philipp, Khader Noor, Hack Norman, Kloft Harald (2021-11)
    A Hybrid Additive Manufacturing Approach:
    Combining Additive Manufacturing and Green-State Concrete Milling to Create a Functionally Integrated Loadbearing Concrete Panel System
  328. Straßer Alexander, Weger Daniel, Matthäus Carla, Kränkel Thomas et al. (2021-11)
    Combining Wire and Arc Additive Manufacturing and Selective Paste-Intrusion for Additively Manufactured Structural Concrete
  329. Neef Tobias, Mechtcherine Viktor (2021-11)
    Simultaneous Integration of Continuous Mineral-Bonded Carbon Reinforcement Into Additive Manufacturing with Concrete
  330. Gantner Stefan, Rothe Tom, Hühne Christian, Hack Norman (2021-11)
    Reinforcement-Strategies for Additive Manufacturing in Construction Based on Dynamic Fiber Winding:
    Concepts and Initial Case Studies
  331. Guimarães Ana, Delgado João, Lucas Sandra (2021-11)
    Additive Manufacturing on Building Construction
  332. Nespor B., Bohac M., Nejedlik M. (2021-11)
    Development of Rapid-Set Mortar for Additive Manufacturing
  333. Wolf Alexander, Rosendahl Philipp, Knaack Ulrich (2021-10)
    Additive Manufacturing of Clay and Ceramic Building Components
  334. Wolfs Robert, Salet Theo, Roussel Nicolas (2021-10)
    Filament-Geometry-Control in Extrusion-Based Additive Manufacturing of Concrete:
    The Good, the Bad and the Ugly
  335. Poudelet Louison, Castellví A., Calvo Laura, Cardona Roger et al. (2021-10)
    Presentation of a Concrete Additive Manufacturing Extruder with On-Line Rheology Modification Capabilities
  336. Graziano Angelo, Cavaliere Ilaria, Costantino Dario, Fallacara Giuseppe et al. (2021-09)
    Additive Manufacturing in Architecture:
    3D Printing Solutions for Vaulted Spaces
  337. Baghdadi Abtin, Dörrie Robin, Kloft Harald (2021-08)
    New Calculation Approach for Selecting and Orienting the Reinforcing Material for Robotic Concrete Manufacturing
  338. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2021-08)
    Experimental Calibration and Compensation for the Continuous Effect of Time, Number of Layers and Volume of Material on Shape Deformation in Small-Scale Additive Manufacturing of Concrete
  339. Nodehi Mehrab, Asiabanpour Bahram, Omer Liam, Ozbakkaloglu Togay (2021-08)
    Material-Characterization of Diversity Aggregated Cementitious Materials Produced with a Modular Lightweight Additive Manufacturing Extrusion-System
  340. Jamali Koosha, Kaushal Vinayak, Najafi Mohammad (2021-07)
    Evolution of Additive Manufacturing in Civil Infrastructure Systems:
    A Ten-Year Review
  341. Guimarães Ana, Delgado João, Lucas Sandra (2021-07)
    Advanced Manufacturing in Civil Engineering
  342. Leite Gabriela, Fontana Marcele (2021-07)
    Additive Manufacturing and the Evolution of the Construction Industry:
    A Systematic Literature Review 2015-2021
  343. Karpova Ekaterina, Skripkiūnas Gintautas, Sedova Anastasiia, Tsimbalyuk Yelyzaveta (2021-07)
    Additive Manufacturing of Concrete Wall-Structures
  344. Kinnell Peter, Dobrzanski James, Xu Jie, Wang Weiqiang et al. (2021-06)
    Precision Manufacture of Concrete Parts Using Integrated Robotic 3D Printing and Milling
  345. Kloft Harald, Gehlen Christoph, Dörfler Kathrin, Hack Norman et al. (2021-06)
    TRR 277:
    Additive Manufacturing in Construction
  346. Hack Norman, Bahar Mohammad, Hühne Christian, Lopez William et al. (2021-06)
    Development of a Robot-Based Multi-Directional Dynamic Fiber Winding Process for Additive Manufacturing Using Shotcrete 3D Printing
  347. Pacillo Gerardo, Ranocchiai Giovanna, Loccarini Federica, Fagone Mario (2021-05)
    Additive Manufacturing in Construction:
    A Review on Technologies, Processes, Materials, and Their Applications of 3D and 4D Printing
  348. Şahin Oğuzhan, İlcan Hüseyin, Ateşli Anıl, Kul Anil et al. (2021-05)
    Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
  349. Ducoulombier Nicolas, Mesnil Romain, Carneau Paul, Demont Léo et al. (2021-05)
    The “Slugs-Test” for Extrusion-Based Additive Manufacturing:
    Protocol, Analysis and Practical Limits
  350. Khajavi Siavash, Tetik Müge, Mohite Ashish, Peltokorpi Antti et al. (2021-04)
    Additive Manufacturing in the Construction Industry:
    The Comparative Competitiveness of 3D Concrete Printing
  351. Dielemans Gido, Briels David, Jaugstetter Fabian, Henke Klaudius et al. (2021-04)
    Additive Manufacturing of Thermally Enhanced Lightweight Concrete Wall Elements with Closed Cellular Structures
  352. Helsel Michelle, Popovics John, Stynoski Peter, Kreiger Eric (2021-03)
    Non-Destructive Testing to Characterize Inter-Layer Bonds of Idealized Concrete Additive Manufacturing Products
  353. Lesovik Valeriy, Tolypina Natalia, Glagolev Evgeniy, Tolypin Daniil (2021-03)
    Reuse of 3D Additive Manufacturing Concrete Scrap in Construction
  354. Sandeep Bolugoddu, Kannan T., Chandradass J., Ganesan M. et al. (2021-02)
    Scope of 3D Printing in Manufacturing Industries:
    A Review
  355. Muñiz Manuel, Chantin Marjorie, Vintila Cristian, Fabritius Marc et al. (2021-02)
    Concrete Hybrid Manufacturing:
    A Machine Architecture
  356. Archez Julien, Maitenaz Sébastien, Demont Léo, Charrier Malo et al. (2021-02)
    Strategy to Shape, on a Half-Meter Scale, a Geopolymer Composite Structure by Additive Manufacturing
  357. Ramadany Mohamed, Bajjou Mohamed (2021-01)
    Applicability and Integration of Concrete Additive Manufacturing in Construction Industry:
    A Case Study
  358. Lesovik Valeriy, Glagolev Evgeniy, Elistratkin Michail, Podgorniy Daniil (2021-01)
    On the Issue of Measuring the Strength of Additively Manufactured Concrete
  359. Kloft Harald, Gehlen Christoph, Dörfler Kathrin, Hack Norman et al. (2021-01)
    TRR 277:
    Additive Manufacturing in Construction
  360. Demont Léo, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2021-01)
    Flow-Based Pultrusion of Continuous Fibers for Cement-Based Composite Material and Additive Manufacturing:
    Rheological and Technological Requirements
  361. Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
    Improving Performance of Additive Manufactured Concrete:
    A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
  362. Sepasgozar Samad, Shi Anqi, Yang Liming, Shirowzhan Sara et al. (2020-12)
    Additive Manufacturing Applications for Industry 4.0:
    A Systematic Critical Review
  363. Vasilić Ksenija (2020-12)
    Additive Manufacturing in Concrete Construction:
    Current Status
  364. Mohammed Alyaa, Saadi Nihad (2020-12)
    Ultra-High Early Strength Cementitious Grout Suitable for Additive Manufacturing Applications Fabricated by Using Graphene Oxide and Viscosity Modifying Agents
  365. Placzek Gerrit, Schwerdtner Patrick (2020-12)
    Derivation of Integration Approaches for "Concrete 3D Printing" in the Construction Process Based on Features of Additive Manufacturing
  366. Singh P., Sreerag K. (2020-12)
    Additive Manufacturing Through Digital Concrete by Extrusion- and Non-Extrusion-Method
  367. Jones Scott (2020-11)
    Fused Filament-Fabrication Printer Modified to Dispense Cement-Paste for Concrete Additive Manufacturing Studies
  368. Dubov Alexey, Ruben Sam (2020-11)
    Material Development Standards and Methods for Additive Manufacturing in Construction to Meet Building Code Requirements for Certification
  369. Papacharalampopoulos Alexios, Bikas Harry, Foteinopoulos Panagis, Stavropoulos Panagiotis (2020-11)
    A Path-Planning-Optimization Framework for Concrete-Based Additive Manufacturing Processes
  370. Vespalec Arnošt, Novák Josef, Kohoutková Alena, Vosynek Petr et al. (2020-11)
    Interface Behavior and Interface Tensile Strength of a Hardened Concrete Mixture with a Coarse Aggregate for Additive Manufacturing
  371. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-11)
    Additive Manufacturing of Cementitious Materials by Selective Paste-Intrusion:
    Numerical Modeling of the Flow Using a 2D-Axisymmetric Phase-Field-Method
  372. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2020-10)
    Experimental Prediction of Material-Deformation in Large-Scale Additive Manufacturing of Concrete
  373. Davtalab Omid, Kazemian Ali, Yuan Xiao, Khoshnevis Behrokh (2020-10)
    Automated Inspection in Robotic Additive Manufacturing Using Deep Learning for Layer Deformation Detection
  374. Qin Hao, Zhang Xiwen (2020-10)
    Improvements on the Design of Sand-Structure Additive Manufacturing
  375. Maboudi Mehdi, Gerke Markus, Hack Norman, Brohmann Leon et al. (2020-08)
    Current Surveying Methods for the Integration of Additive Manufacturing in the Construction Process
  376. Ortega Guillermo, Madrid Javier, Olsson Nils, Tenorio Ríos José (2020-08)
    The Application of 3D Printing Techniques in the Manufacturing of Cement-Based Construction Products and Experiences Based on the Assessment of Such Products
  377. Wang Shian, Liu Chi, Zhang Guo, Luo Qi et al. (2020-08)
    Digital Planting:
    Fabrication of Integrated Concrete Green Wall via Additive Manufacturing
  378. Anton Ana-Maria, Jipa Mihail-Andrei, Reiter Lex, Dillenburger Benjamin (2020-07)
    Fast Complexity:
    Additive Manufacturing for Prefabricated Concrete Slabs
  379. Henke Klaudius, Talke Daniel, Matthäus Carla (2020-07)
    Additive Manufacturing by Extrusion of Lightweight Concrete:
    Strand Geometry, Nozzle Design and Layer Layout
  380. Battaglia Christopher, Miller Martin, Verian Kho (2020-07)
    Print-Cast Concrete:
    Additive Manufacturing for 3D Printing Mortar in Robotically Fabricated Green Sand Molds
  381. Ducoulombier Nicolas, Carneau Paul, Mesnil Romain, Demont Léo et al. (2020-07)
    The Slug-Test:
    In-Line-Assessment of Yield-Stress for Extrusion-Based Additive Manufacturing
  382. Sambucci Matteo, Valente Marco, Sibai Abbas, Marini Danilo et al. (2020-07)
    Rubber-Cement Composites for Additive Manufacturing:
    Physical, Mechanical and Thermo-Acoustic Characterization
  383. Napolitano Rosanna, Menna Costantino, Asprone Domenico, Giudice Lorenzo (2020-07)
    Mechanical Characterization of Layer-by-Layer Interface in Concrete Elements Obtained by Additive Manufacturing
  384. Weger Daniel, Baier Daniel, Straßer Alexander, Prottung Sophia et al. (2020-07)
    Reinforced Particle-Bed Printing by Combination of the Selective Paste-Intrusion Method with Wire and Arc Additive Manufacturing:
    A First Feasibility Study
  385. Figueiredo Stefan, Overmeir Anne, Nefs Karsten, Schlangen Erik et al. (2020-07)
    Quality-Assessment of Printable Strain-Hardening Cementitious Composites Manufactured in Two Different Printing Facilities
  386. Park Jinsoo, Lee Hojae, Choi Hanshin (2020-07)
    Buildability of Mortar-Feedstock in Material-Extrusion Additive Manufacturing
  387. Codarin Sara (2020-07)
    Additive Manufacturing Technologies in Restoration
  388. Rashid Ans, Khan Shoukat, Ghamdi Sami, Koç Muammer (2020-06)
    Additive Manufacturing:
    Technology, Applications, Markets, and Opportunities for the Built Environment
  389. Toklu Yusuf, Bekdaş Gebrail, Geem Zong (2020-06)
    Harmony-Search-Optimization of Nozzle Movement for Additive Manufacturing of Concrete Structures and Concrete Elements
  390. Roussel Nicolas, Spangenberg Jon, Wallevik Jon, Wolfs Robert (2020-06)
    Numerical Simulations of Concrete Processing:
    From Standard Formative Casting to Additive Manufacturing
  391. Xu Jie, Buswell Richard, Kinnell Peter, Biro Istvan et al. (2020-06)
    Inspecting Manufacturing Precision of 3D Printed Concrete Parts Based on Geometric Dimensioning and Tolerancing
  392. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schmeier Tobias (2020-06)
    Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete:
    Concept and Feasibility Study
  393. Carstensen Josephine (2020-06)
    Topology-Optimization with Nozzle-Size-Restrictions for Material-Extrusion-Type Additive Manufacturing
  394. Fratello Virginia, Rael Ronald (2020-05)
    Innovating Materials for Large-Scale Additive Manufacturing:
    Salt, Soil, Cement and Chardonnay
  395. Claßen Martin, Ungermann Jan, Sharma Rahul (2020-05)
    Additive Manufacturing of Reinforced Concrete:
    Development of a 3D Printing Technology for Cementitious Composites with Metallic Reinforcement
  396. Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
    Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing
  397. Ducoulombier Nicolas, Demont Léo, Chateau Camille, Bornert Michel et al. (2020-04)
    Additive Manufacturing of Anisotropic Concrete:
    A Flow-Based Pultrusion of Continuous Fibers in a Cementitious Matrix
  398. Carneau Paul, Mesnil Romain, Roussel Nicolas, Baverel Olivier (2020-04)
    Additive Manufacturing of Cantilever:
    From Masonry to Concrete 3D Printing
  399. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
    Extrusion-Based Additive Manufacturing with Cement-Based Materials:
    Production Steps, Processes, and Their Underlying Physics
  400. Vergara Luis, Colorado Henry (2020-03)
    Additive Manufacturing of Portland Cement-Pastes with Additions of Kaolin, Superplastificant and Calcium-Carbonate
  401. Heinlein Ulli, Fraundorfer Andreas, Katona Sebastian, Wimmer Matthias (2020-02)
    Manufacturing of Curved Load-Bearing Concrete Elements Using an Adaptive Formwork Tool
  402. Lakhal Othman, Chettibi Taha, Belarouci Abdelkader, Dherbomez Gerald et al. (2020-02)
    Robotized Additive Manufacturing of Funicular Architectural Geometries Based on Building Materials
  403. Ahmed Zeeshan, Bos Freek, Brunschot Maikel, Salet Theo (2020-02)
    On-Demand Additive Manufacturing of Functionally Graded Concrete
  404. Foteinopoulos Panagis, Esnault Vivien, Komineas George, Papacharalampopoulos Alexios et al. (2020-01)
    Cement-Based Additive Manufacturing:
    Experimental Investigation of Process Quality
  405. Gradeci Klodian, Labonnote Nathalie (2019-11)
    On the Potential of Integrating Building Information Modelling for the Additive Manufacturing of Concrete Structures
  406. Kloft Harald, Hack Norman, Mainka Jeldrik, Brohmann Leon et al. (2019-11)
    Additive Manufacturing in Construction:
    First 3D-Printed Reinforced Concrete Components Using Shotcrete 3D Printing (SC3DP) Technology
  407. Nazarian Shadi, Duarte José, Bilén Sven, Memari Ali et al. (2019-11)
    Additive Manufacturing of Architectural Structures:
    An Interplay Between Materials, Systems, and Design
  408. Paolini Alexander, Kollmannsberger Stefan, Rank Ernst (2019-10)
    Additive Manufacturing in Construction:
    A Review on Processes, Applications, and Digital Planning Methods
  409. Shen Hongyao, Pan Lingnan, Qian Jun (2019-10)
    Research on Large-Scale Additive Manufacturing Based on Multi-Robot Collaboration Technology
  410. Vasilić Ksenija (2019-09)
    Additive Manufacturing in Concrete Construction:
    Current Status
  411. Gaag Bert, Ijselmuijden Kees, Kardas Maurice, Herwaarden Joël et al. (2019-09)
    Structural Bridge Design for Additive Manufacturing
  412. Valente Marco, Sibai Abbas, Sambucci Matteo (2019-09)
    Extrusion-Based Additive Manufacturing of Concrete Products:
    Revolutionizing and Remodeling the Construction Industry
  413. Watson Nathan, Meisel Nicholas, Bilén Sven, Duarte José et al. (2019-08)
    Large-Scale Additive Manufacturing of Concrete Using a Six-Axis Robotic Arm for Autonomous Habitat Construction
  414. Lee Hojae, Kim Jang-Ho, Moon Jae-Heum, Kim Won-Woo et al. (2019-08)
    Correlation Between Pore Characteristics and Tensile Bond Strength of Additive Manufactured Mortar Using X-Ray Computed Tomography
  415. Foteinopoulos Panagis, Papacharalampopoulos Alexios, Stavropoulos Panagiotis (2019-06)
    Block-Based Analytical Hierarchy Process Applied for the Evaluation of Construction Sector Additive Manufacturing
  416. Keita Emmanuel, Bessaies-Bey Hela, Zuo Wenqiang, Belin Patrick et al. (2019-06)
    Weak Bond Strength Between Successive Layers in Extrusion-Based Additive Manufacturing:
    Measurement and Physical Origin
  417. Bhardwaj Abhinav, Jones Scott, Kalantar Negar, Pei Zhijian et al. (2019-06)
    Additive Manufacturing Processes for Infrastructure Construction:
    A Review
  418. Comminal Raphaël, Serdeczny Marcin, Pedersen David, Spangenberg Jon (2019-06)
    Motion-Planning and Numerical Simulation of Material-Deposition at Corners in Extrusion Additive Manufacturing
  419. Kontovourkis Odysseas, Tryfonos George, Georgiou Christos (2019-06)
    Robotic Additive Manufacturing (RAM) with Clay Using Topology-Optimization Principles for Tool-Path-Planning:
    The Example of a Building Element
  420. Hamidi Fatemeh, Aslani Farhad (2019-05)
    Additive Manufacturing of Cementitious Composites:
    Materials, Methods, Potentials, and Challenge
  421. Serdeczny Marcin, Comminal Raphaël, Pedersen David, Spangenberg Jon (2019-05)
    Numerical Simulations of the Mesostructure Formation in Material-Extrusion Additive Manufacturing
  422. Urhal Pinar, Weightman Andrew, Diver Carl, Bartolo Paulo (2019-05)
    Robot-Assisted Additive Manufacturing:
    A Review
  423. Craveiro Flávio, Duarte José, Bártolo Helena, Bartolo Paulo (2019-04)
    Additive Manufacturing as an Enabling Technology for Digital Construction:
    A Perspective on Construction 4.0
  424. Gaudillière-Jami Nadja, Duballet Romain, Bouyssou Charles, Mallet Alban et al. (2019-02)
    Building Applications Using Lost Formworks Obtained Through Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete
  425. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Malek Sardar (2019-01)
    Review of Emerging Additive Manufacturing Technologies in 3D Printing of Cementitious Materials in the Construction Industry
  426. Ashrafi Negar, Duarte José, Nazarian Shadi, Meisel Nicholas (2018-10)
    Evaluating the Relationship Between Deposition and Layer-Quality in Large-Scale Additive Manufacturing of Concrete
  427. Gaudillière-Jami Nadja, Duballet Romain, Bouyssou Charles, Mallet Alban et al. (2018-09)
    Large-Scale Additive Manufacturing of Ultra-High-Performance Concrete of Integrated Formwork for Truss-Shaped Pillars
  428. Lindemann Hendrik, Gerbers Roman, Ibrahim Serhat, Dietrich Franz et al. (2018-09)
    Development of a Shotcrete 3D Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures
  429. Moini Mohamadreza, Olek Jan, Magee Bryan, Zavattieri Pablo et al. (2018-09)
    Additive Manufacturing and Characterization of Architectured Cement-Based Materials via X-Ray Micro-Computed Tomography
  430. Lowke Dirk (2018-09)
    Concrete, the Predestined Building Material for Additive Manufacturing
  431. Moini Mohamadreza, Olek Jan, Youngblood Jeffrey, Magee Bryan et al. (2018-08)
    Additive Manufacturing and Performance of Architectured Cement-Based Materials
  432. Hillegas James, Liu Rui, Liu Bosheng, Sanchez Alex et al. (2018-07)
    Engineering Properties Influencing Clayey Materials for Additive Manufacturing
  433. Albar Abdulrahman, Swash Mohammad, Ghaffar Seyed (2018-07)
    Scalable Additive Manufacturing Solution for Construction
  434. Bhardwaj Abhinav, Zou Na, Pei Zhijian (2018-06)
    Additive Manufacturing for Civil Infrastructure Design and Construction:
    Current State and Gaps
  435. Kumar Sanjay (2018-06)
    Process Chain Development for Additive Manufacturing of Cemented Carbide
  436. Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
    3D Printed Steel-Reinforcement for Digital Concrete Construction:
    Manufacture, Mechanical Properties and Bond Behavior
  437. Lao Wenxin, Tay Yi, Quirin Didier, Tan Ming (2018-05)
    The Effect of Nozzle Shapes on the Compactness and Strength of Structure Printed in Additive Manufacturing of Concrete
  438. Ghaffar Seyed, Corker Jorge, Fan Mizi (2018-05)
    Additive Manufacturing Technology and Its Implementation in Construction as an Eco-Innovative Solution
  439. Ibrahim Serhat, Olbrich Alexander, Lindemann Hendrik, Gerbers Roman et al. (2018-02)
    Automated Additive Manufacturing of Concrete Structures without Formwork:
    Concept for Path-Planning
  440. Ngo Tuan, Kashani Alireza, Imbalzano Gabriele, Nguyen Quynh et al. (2018-02)
    Additive Manufacturing (3D Printing):
    A Review of Materials, Methods, Applications and Challenges
  441. Delgado Camacho Daniel, Clayton Patricia, Brien William, Seepersad Carolyn et al. (2018-02)
    Applications of Additive Manufacturing in the Construction Industry:
    A Forward-Looking Review
  442. Villacis N., Gualavisi M., Narváez-Muñoz Christian, Carrión L. et al. (2017-11)
    Additive Manufacturing of a Rheological Characterized Cement-Based Composite Material
  443. Panda Biranchi, Paul Suvash, Lim Jian, Tay Yi et al. (2017-08)
    Additive Manufacturing of Geopolymer for Sustainable Built Environment
  444. Craveiro Flávio, Bártolo Helena, Gale Andrew, Duarte José et al. (2017-07)
    A Design Tool for Resource-Efficient Fabrication of 3D Graded Structural Building Components Using Additive Manufacturing
  445. Izard Jean-Baptiste, Dubor Alexandre, Hervé Pierre-Elie, Cabay Edouard et al. (2017-07)
    On the Improvements of a Cable-Driven Parallel Robot for Achieving Additive Manufacturing for Construction
  446. Delgado Camacho Daniel, Clayton Patricia, Brien William, Ferron Raissa et al. (2017-07)
    Applications of Additive Manufacturing in the Construction Industry:
    A Prospective Review
  447. Kontovourkis Odysseas, Tryfonos George (2017-07)
    Integrating Parametric Design with Robotic Additive Manufacturing for 3D Clay Printing:
    An Experimental Study
  448. Krimi Imane, Lafhaj Zoubeir, Ducoulombier Laure (2017-05)
    Prospective Study on the Integration of Additive Manufacturing to Building Industry:
    Case of a French Construction Company
  449. Wörner Mark, Schmeer Daniel, Schuler Benjamin, Pfinder Julian et al. (2016-12)
    The Technology of Graded Concrete:
    From the Development of Concrete Mixtures and the Conceptual Design to the Automatized Manufacturing
  450. Biswas Kaushik, Rose James, Eikevik Leif, Guerguis Maged et al. (2016-11)
    Additive Manufacturing Integrated Energy:
    Enabling Innovative Solutions for Buildings of the Future
  451. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2016-08)
    Additive Manufacturing of Concrete in Construction:
    Potentials and Challenges of 3D Concrete Printing
  452. Bohan Richard (2016-05)
    Adding Manufacturing Using Concrete:
    A Bridge Too Far?
  453. Neudecker Stefan, Bruns Christopher, Gerbers Roman, Heyn Jakob et al. (2016-05)
    A New Robotic Spray Technology for Generative Manufacturing of Complex Concrete-Structures without Formwork
  454. Duballet Romain, Gosselin Clément, Roux Philippe (2015-10)
    Additive Manufacturing and Multi-Objective Optimization of Graded Polystyrene-Aggregate Concrete Structures
  455. Zhou Xiangming, Li Zongjin (2015-08)
    Manufacturing Cement-Based Materials and Building Products via Extrusion:
    From Laboratory to Factory
  456. Duro-Royo Jorge, Mogas-Soldevila Laia, Oxman Neri (2015-06)
    Flow-Based Fabrication:
    An Integrated Computational Workflow for Design and Digital Additive Manufacturing of Multifunctional Heterogeneously Structured Objects
  457. Helm Volker, Willmann Jan, Gramazio Fabio, Kohler Matthias (2013-11)
    In-Situ Robotic Fabrication:
    Advanced Digital Manufacturing Beyond the Laboratory
  458. Carlo Tony, Khoshnevis Behrokh, Chen Yong (2013-11)
    Manufacturing Additively, with Fresh Concrete
  459. Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
    Developments in Construction-Scale Additive Manufacturing Processes
  460. Kestelier Xavier, Buswell Richard (2009-10)
    A Digital Design Environment for Large-Scale Rapid Manufacturing
  461. Buswell Richard, Thorpe Tony, Soar Rupert, Gibb Alistar (2008-05)
    Design, Data and Process Issues for Mega-Scale Rapid Manufacturing Machines Used for Construction
  462. Buswell Richard, Soar Rupert, Gibb Alistar, Thorpe Tony (2006-06)
    Freeform Construction:
    Mega-Scale Rapid Manufacturing for Construction
  463. Soar Rupert (2005-11)
    Additive Manufacturing Technologies for the Construction Industry