Skibicki Szymon¶

1. Nermend Loran, Skibicki Szymon, Techman Mateusz, Federowicz Karol et al. (2025-12)
   Electrical Resistivity and Elevated Temperature Performance of 3D Printed Concrete Containing Nanosized Radiation Shielding Admixtures
2. Sikora Paweł, Federowicz Karol, Skibicki Szymon, Techman Mateusz et al. (2025-11)
   Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates and Recycled Concrete Powder:
   Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance.
3. Sikora Paweł, Skibicki Szymon, Bielawski Jakub, Techman Mateusz et al. (2025-09)
   Elevated Temperature Response and Fire Resistance Considerations of 3D-Printed Concrete:
   Small- to Medium-Scale Wall Experiments
4. Sikora Paweł, Skibicki Szymon, Chougan Mehdi, Szewczyk Piotr et al. (2025-03)
   Silica-Coated Admixtures of Bismuth and Gadolinium Oxides for 3D Printed Concrete Applications:
   Rheology, Hydration, Strength, Microstructure, and Radiation Shielding Perspective
5. Kaszyńska Maria, Skibicki Szymon (2024-11)
   Sustainable Development Approach for 3D Concrete Printing
6. Skibicki Szymon, Dvořák Richard, Pazdera Luboš, Topolář Libor et al. (2024-11)
   Anisotropic Mechanical Properties of 3D Printed Mortar Determined by Standard Flexural and Compression-Test and Acoustic Emission
7. Chougan Mehdi, Skibicki Szymon, Noaimat Yazeed, Federowicz Karol et al. (2024-09)
   Comparative Analysis of Ternary Blended Cement with Clay and Engineering-Brick-Aggregate for High-Performance 3D Printing
8. Sikora Paweł, Federowicz Karol, Techman Mateusz, Skibicki Szymon (2024-09)
   Fine Recycled Concrete Aggregates in 3D Printed Concrete
9. Skibicki Szymon, Federowicz Karol, Hoffmann Marcin, Chougan Mehdi et al. (2024-05)
   Potential of Reusing 3D Printed Concrete (3DPC) Fine Recycled Aggregates as a Strategy Towards Decreasing Cement Content in 3DPC
10. Skibicki Szymon, Szewczyk Piotr, Majewska Julia, Sibera Daniel et al. (2024-03)
    The Effect of Inter-Layer Adhesion on Stress-Distribution in 3D Printed Beam Elements
11. Noaimat Yazeed, Chougan Mehdi, Albar Abdulrahman, Skibicki Szymon et al. (2023-10)
    Recycled Brick-Aggregates in One-Part Alkali-Activated Materials:
    Impact on 3D Printing Performance and Material-Properties
12. Olczyk Norbert, Skibicki Szymon, Gierszewska Natalia (2023-08)
    3D Printed Mortar with High Alumina-Cement as Alternative Solution for Standard Materials Used for 3D Printing
13. Federowicz Karol, Techman Mateusz, Skibicki Szymon, Chougan Mehdi et al. (2023-08)
    Development of 3D Printed Heavyweight Concrete Containing Magnetite-Aggregate
14. Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria, Hoffmann Marcin et al. (2022-04)
    The Effect of Using Recycled PET-Aggregates on Mechanical and Durability Properties of 3D Printed Mortar
15. Skibicki Szymon, Jakubowska Patrycja, Kaszyńska Maria, Sibera Daniel et al. (2021-12)
    Early-Age Mechanical Properties of 3D Printed Mortar with Spent Garnet
16. Skibicki Szymon, Techman Mateusz, Federowicz Karol, Olczyk Norbert et al. (2021-12)
    Experimental Study of Hardened Young's Modulus for 3D Printed Mortar
17. Hoffmann Marcin, Żarkiewicz Krzysztof, Zieliński Adam, Skibicki Szymon et al. (2021-05)
    Foundation Piles:
    A New Feature for Concrete 3D Printers
18. Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria (2021-01)
    Evaluation of Material-Modification Using PET in 3D Concrete Printing Technology
19. Kaszyńska Maria, Skibicki Szymon, Hoffmann Marcin (2020-12)
    3D Concrete Printing for Sustainable Construction
20. Skibicki Szymon, Kaszyńska Maria, Wahib Nawid, Techman Mateusz et al. (2020-07)
    Properties of Composite Modified with Limestone-Powder for 3D Concrete Printing
21. Hoffmann Marcin, Skibicki Szymon, Pankratow Paweł, Zieliński Adam et al. (2020-04)
    Automation in the Construction of a 3D Printed Concrete Wall with the Use of a Lintel Gripper
22. Kaszyńska Maria, Olczyk Norbert, Techman Mateusz, Skibicki Szymon et al. (2019-02)
    Thermal-Humidity Parameters of 3D Printed Wall