Sikora Paweł¶

1. Federowicz Karol, Sibera Daniel, Tošić Nikola, Zieliński Adam et al. (2026-01)
   Early-Age Shrinkage Monitoring of 3D-Printed Cementitious Mixtures: Comparison of Measuring Techniques and Low-Cost Alternatives
2. Nermend Loran, Skibicki Szymon, Techman Mateusz, Federowicz Karol et al. (2025-12)
   Electrical Resistivity and Elevated Temperature Performance of 3D Printed Concrete Containing Nanosized Radiation Shielding Admixtures
3. Sikora Paweł, Federowicz Karol, Skibicki Szymon, Techman Mateusz et al. (2025-11)
   Demonstration of 3D-Printed Concrete Containing Fine Recycled Concrete Aggregates and Recycled Concrete Powder:
   Rheology, Early-Age, Shrinkage, Mechanical, and Durability Performance.
4. Sikora Paweł (2025-09)
   Globally First 3D‐Printed Concrete Drinking Water Tank in Barczewko, Poland
5. Sikora Paweł, Skibicki Szymon, Bielawski Jakub, Techman Mateusz et al. (2025-09)
   Elevated Temperature Response and Fire Resistance Considerations of 3D-Printed Concrete:
   Small- to Medium-Scale Wall Experiments
6. Ding Tao, Dong Haining, Sikora Paweł, Lin Guan (2025-07)
   3D Printed Concrete Reinforced with Flexible Fiber Reinforced Polymer Strips or Grids:
   Concept and Bond Tests
7. Sikora Paweł, Skibicki Szymon, Chougan Mehdi, Szewczyk Piotr et al. (2025-03)
   Silica-Coated Admixtures of Bismuth and Gadolinium Oxides for 3D Printed Concrete Applications:
   Rheology, Hydration, Strength, Microstructure, and Radiation Shielding Perspective
8. Sikora Paweł, Rathnarajan Sundar, Federowicz Karol, Techman Mateusz et al. (2024-11)
   Use of Seawater as an Accelerator in 3D Printed Concrete
9. Federowicz Karol, Cendrowski Krzysztof, Sikora Paweł (2024-10)
   Low-Carbon Cementitious Composite Incorporated with Biochar and Recycled Fines Suitable for 3D Printing Applications:
   Hydration, Shrinkage and Early-Age Performance
10. Cuevas Villalobos Karla, Chung Sang-Yeop, Sikora Paweł, Stephan Dietmar (2024-10)
    Performance of Normal-Weight and Lightweight 3D Printed Cementitious Composites with Recycled Glass:
    Sorption and Microstructural Perspective
11. Chougan Mehdi, Skibicki Szymon, Noaimat Yazeed, Federowicz Karol et al. (2024-09)
    Comparative Analysis of Ternary Blended Cement with Clay and Engineering-Brick-Aggregate for High-Performance 3D Printing
12. Sikora Paweł, Federowicz Karol, Techman Mateusz, Skibicki Szymon (2024-09)
    Fine Recycled Concrete Aggregates in 3D Printed Concrete
13. Skibicki Szymon, Federowicz Karol, Hoffmann Marcin, Chougan Mehdi et al. (2024-05)
    Potential of Reusing 3D Printed Concrete (3DPC) Fine Recycled Aggregates as a Strategy Towards Decreasing Cement Content in 3DPC
14. Skibicki Szymon, Szewczyk Piotr, Majewska Julia, Sibera Daniel et al. (2024-03)
    The Effect of Inter-Layer Adhesion on Stress-Distribution in 3D Printed Beam Elements
15. Noaimat Yazeed, Chougan Mehdi, Albar Abdulrahman, Skibicki Szymon et al. (2023-10)
    Recycled Brick-Aggregates in One-Part Alkali-Activated Materials:
    Impact on 3D Printing Performance and Material-Properties
16. Federowicz Karol, Techman Mateusz, Skibicki Szymon, Chougan Mehdi et al. (2023-08)
    Development of 3D Printed Heavyweight Concrete Containing Magnetite-Aggregate
17. Cuevas Villalobos Karla, Strzałkowski Jarosław, Kim Ji-Su, Ehm Clemens et al. (2023-02)
    Towards Development of Sustainable Lightweight 3D Printed Wall Building Envelopes:
    Experimental and Numerical Studies
18. Chougan Mehdi, Ghaffar Seyed, Nematollahi Behzad, Sikora Paweł et al. (2022-09)
    Effect of Natural and Calcined-Halloysite-Clay-Minerals as Low-Cost-Additives on the Performance of 3D Printed Alkali-Activated Materials
19. Sikora Paweł, Techman Mateusz, Federowicz Karol, Khayatt Ahmed et al. (2022-07)
    Insight into the Microstructural and Durability Characteristics of 3D Printed Concrete:
    Cast versus Printed Specimens
20. Cuevas Villalobos Karla, Chougan Mehdi, Martin Falk, Ghaffar Seyed et al. (2021-05)
    3D Printable Lightweight Cementitious Composites with Incorporated Waste-Glass-Aggregates and Expanded Microspheres:
    Rheological, Thermal and Mechanical Properties
21. Sikora Paweł, Chougan Mehdi, Cuevas Villalobos Karla, Liebscher Marco et al. (2021-02)
    The Effects of Nano- and Micro-Sized Additives on 3D Printable Cementitious and Alkali-Activated Composites:
    A Review
22. Sikora Paweł, Chung Sang-Yeop, Liard Maxime, Lootens Didier et al. (2021-02)
    The Effects of Nano-Silica on the Fresh and Hardened Properties of 3D Printable Mortars
23. Chougan Mehdi, Ghaffar Seyed, Sikora Paweł, Chung Sang-Yeop et al. (2021-02)
    Investigation of Additive Incorporation on Rheological, Microstructural and Mechanical Properties of 3D Printable Alkali-Activated Materials