Skip to content

Wang Zhendi

Information

ORCID
0000-0003-2593-6641
First Contribution
2022-01-12
Last Contribution
2026-03-31
Number Contributions
11
Number Citations
114

Top Co-Authors

  1. Yang Rijiao (6)
  2. Zeng Qiang (6)
  3. Peng Yu (5)
  4. Lowke Dirk (4)
  5. Mechtcherine Viktor (4)

Top Cited Articles

  1. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
    On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements (38)

Persons This Author Cites the Most

  1. Sanjayan Jay (46)
  2. Mechtcherine Viktor (45)
  3. de Schutter Geert (33)
  4. Nerella Venkatesh (31)
  5. van Tittelboom Kim (29)

Persons This Author Is Cited Most By

  1. Buswell Richard (7)
  2. Liu Chao (7)
  3. Liu Huawei (7)
  4. Bai Meiyan (5)
  5. Xiao Jianzhuang (5)

  1. Zhen Houru, Wang Zhendi, Wang Ling, Zeng Qiang et al. (2026-03)
    Interfacial Property and Microstructure Improvement of 3D Printed Concrete via Micro-Region Vibration
  2. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
    Durability Assessment of 3D Printed Cement-Based Materials:
    A RILEM TC 304-ADC Interlaboratory Study
  3. Yang Rijiao, Xu Chengji, You Xiufei, Li Xinze et al. (2025-09)
    Saddle Stitching-Enabled Interfacial Toughening in 3D Printed Concrete
  4. Yang Rijiao, Xu Chengji, Fang Sen, Li Xinze et al. (2025-07)
    Mechanistic Insights into Microstructural Changes Caused by Stapling in Extrusion-Based 3D Printed Concrete (3DPC)
  5. Mechtcherine Viktor, Muthukrishnan Shravan, Robens-Radermacher Annika, Wolfs Robert et al. (2025-06)
    Compressive Strength and Modulus of Elasticity:
    Mechanical Properties of 3D Printed Concrete
  6. Wolfs Robert, Versteege Jelle, Santhanam Manu, Bhattacherjee Shantanu et al. (2025-06)
    Flexural and Tensile Strength:
    Mechanical Properties of 3D Printed Concrete
  7. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
    On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
  8. Yang Rijiao, Xu Chengji, Lan Yan, Qiu Yue et al. (2024-08)
    Near Pixel-Level Characterisation of Micro-Fibers in 3D Printed Cementitious Composites and Migration Mechanisms Using a Novel Iterative Method
  9. Yang Rijiao, Zhu Yi, Lan Yan, Zeng Qiang et al. (2022-10)
    Differences in Micro Grain & Fiber-Distributions Between Matrix and Inter-Layer of Cementitious Filaments Affected by Extrusion-Molding
  10. Yang Rijiao, Zeng Qiang, Peng Yu, Wang Hailong et al. (2022-05)
    Anomalous Matrix and Inter-Layer Pore-Structure of 3D Printed Fiber-Reinforced Cementitious Composites
  11. Putten Jolien, Nerella Venkatesh, Mechtcherine Viktor, Hondt Mélody et al. (2022-01)
    Properties and Testing of Printed Cement-Based Materials in Hardened State