3D Printing of Curved Concrete Surfaces Using Adaptable Membrane Formwork (2019-10)¶
10.1016/j.conbuildmat.2019.117075
, , Pham Quang-Cuong
Journal Article - Construction and Building Materials, Vol. 232
Abstract
In this paper, we study the printing of non-developable curved panels using existing 3D concrete printing technology combined with a novel Adaptable Membrane Formwork. The Adaptable Membrane Formwork consists of a grid of threaded rods, whose heights are adjustable and covered by a membrane sheet. Using this method, we were able to 3D-print, for the first time, Saddle and Dome-shaped concrete surfaces, which are non-developable. The printed specimens had good print quality and geometric fidelity, as shown by quantitative assessment. The proposed method thus demonstrates great potential for the 3D printing of freeform, curved and architectural facades.
¶
10 References
- Borg Costanzi Christopher, Ahmed Zeeshan, Schipper Roel, Bos Freek et al. (2018-07)
3D Printing Concrete on Temporary Surfaces:
The Design and Fabrication of a Concrete Shell Structure - Buswell Richard, Silva Wilson, Jones Scott, Dirrenberger Justin (2018-06)
3D Printing Using Concrete-Extrusion:
A Roadmap for Research - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Lim Sungwoo, Buswell Richard, Le Thanh, Wackrow Rene et al. (2011-07)
Development of a Viable Concrete Printing Process - Lindemann Hendrik, Gerbers Roman, Ibrahim Serhat, Dietrich Franz et al. (2018-09)
Development of a Shotcrete 3D Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures - Nematollahi Behzad, Xia Ming, Sanjayan Jay (2017-07)
Current Progress of 3D Concrete Printing Technologies - Panda Biranchi, Lim Jian, Tan Ming (2019-02)
Mechanical Properties and Deformation Behavior of Early-Age Concrete in the Context of Digital Construction - Sanjayan Jay, Nematollahi Behzad (2019-02)
3D Concrete Printing for Construction Applications - Zareiyan Babak, Khoshnevis Behrokh (2018-05)
Effects of Mixture Ingredients on Extrudability of Concrete in Contour Crafting - Zhang Xu, Li Mingyang, Lim Jian, Weng Yiwei et al. (2018-08)
Large-Scale 3D Printing by a Team of Mobile Robots
55 Citations
- Zhu Pengjia, Tan Hailong, Ma Juntao, Yin Jianguang et al. (2026-04)
Mix Proportion Design and Performance Regulation of 3D-Printing Phosphogypsum-Based Geopolymer Paste - Li Junjie, Li Yangbo, Ge Xianqiang, Li Ke et al. (2026-01)
Strength Enhancement of 3D-Printed Phosphogypsum Concrete Based on Synergistic Activation of Multi-Solid Wastes - Zhang Chao, Zhang Junyi, Su Yilin, Zhang Yuying et al. (2026-01)
Low-Carbon 3D-Printed Concrete by Using Biochar as a Carbon Sequestrator - Nguyen Trang, Park Jaejun, Kim Dong-Hyun (2025-11)
Impacts of Infill Patterns and Curve Types in 3D Printed Clay Walls - Li Leo, Xiao Bofeng, Kou Shi-cong (2025-09)
Influences of Fiber Length on the Printability and Strength of Glass Fiber-Reinforced 3D-Printed Mortar - Lian Hongqian, Ding Tao (2025-09)
Deformation of Inclined Concrete 3D Printing:
A Computational Fluid Dynamics Analysis - Li Shuai, Liu Junli, Cheng Chi-Tsun, Xuan Hung et al. (2025-06)
Design and Performance of 3D Printed Bouligand Steel Fiber-Reinforced Cementitious Composite Curved Beams - Casanova Euro, Hidalgo Nelson, Valdebenito Michael, Forcael Eric et al. (2025-04)
Overturning Resistance of Concrete Curved Walls Manufactured with Additive Construction - Wang Bolin, Yang Min, Liu Shilong, Liu Xianda et al. (2024-10)
Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multi-Modal Analysis - Jin Peng, Hasany Masoud, Kohestanian Mohammad, Mehrali Mehdi (2024-10)
Micro/Nano Additives in 3D Printing Concrete:
Opportunities, Challenges, and Potential Outlook in Construction Applications - Li Shuai, Lan Tian, Nguyen Hung-Xuan, Tran Jonathan (2024-10)
Frontiers in Construction 3D Printing:
Self-Monitoring, Multi-Robot, Drone-Assisted Processes - Ivaniuk Egor, Tošić Zlata, Lordick Daniel, Mechtcherine Viktor (2024-09)
Flow Production of Variable Curved Modules for Thin-Walled Concrete Shell Structures - Kamhawi Abdallah, Brown Jacob, Fahmy Ali, Meibodi Mania (2024-09)
Waste-Free Production of Ultra-Thin Concrete Panels via Robotic 3D Printing and CNC Dynamic Bed Device - Farrokhsiar Paniz, Gürsoy Benay, Duarte José (2024-08)
A Comprehensive Review on Integrating Vision-Based Sensing in Extrusion-Based 3D Printing Processes:
Toward Geometric Monitoring of Extrusion-Based 3D Concrete Printing - Sucharda Oldřich, Gandel Radoslav, Cmiel Petr, Jeřábek Jan et al. (2024-07)
Utilization of High-Performance Concrete Mixtures for Advanced Manufacturing Technologies - Ivaniuk Egor, Tošić Zlata, Müller Steffen, Lordick Daniel et al. (2024-07)
Automated Manufacturing of Reinforced Modules of Segmented Shells Based on 3D Printing with Strain-Hardening Cementitious Composites - Li Yu, Wu Hao, Xie Xinjie, Zhang Liming et al. (2024-02)
FloatArch:
A Cable-Supported, Unreinforced, and Re-Assemblable 3D Printed Concrete Structure Designed Using Multi-Material Topology-Optimization - Briels David, Renz Mauritz, Nouman Ahmad, Straßer Alexander et al. (2023-10)
Monolithic AM Façade:
Multi-Objective Parametric Design-Optimization of Additively Manufactured Insulating Wall Elements - Ungureanu Dragoș, Onuțu Cătălin, Isopescu Dorina, Țăranu Nicolae et al. (2023-06)
A Novel Approach for 3D Printing Fiber-Reinforced Mortars - Shenawa Amaal, Karoti Poonam (2023-06)
3D Printing in Construction, Mixture Characteristics, Strength, and Thermal Performance-Review - Besklubova Svetlana, Tan Bing, Zhong Ray, Spicek Nikola (2023-04)
Logistic-Cost-Analysis for 3D Printing Construction Projects Using a Multi-Stage Network-Based Approach - Wu Hao, Gu Sijia, Gao Xiaofan, Luo Jiaxiang et al. (2023-03)
Extrusion to Masoning:
Robotic 3D Concrete Printing of Concrete Shells as Building Floor System - Oval Robin, Nuh Mishael, Costa Eduardo, Madyan Omar et al. (2023-01)
A Prototype Low-Carbon Segmented Concrete Shell Building Floor System - Vijayalaxmi Jeyasingh, Singh Parth (2023-01)
Comparative Analysis of Concrete 3D Printing and Conventional Construction Technique for Housing - Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
Modelling of 3D Concrete Printing Process:
A Perspective on Material and Structural Simulations - Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features - Li Shuai, Nguyen-Xuan Hung, Tran Jonathan (2022-11)
Digital Design and Parametric Study of 3D Concrete Printing on Non-Planar Surfaces - Zhao Yanhua, Meng Wei, Wang Peifu, Qian Dongqing et al. (2022-09)
Research-Progress of Concrete 3D Printing Technology and Its Equipment System, Material, and Molding-Defect-Control - Ivaniuk Egor, Tošić Zlata, Eichenauer Martin, Müller Steffen et al. (2022-09)
Automated Production of Textile Reinforced Concrete Modules for the Assembly of Shell Structures - Žujović Maša, Obradović Radojko, Rakonjac Ivana, Milošević Jelena (2022-08)
3D Printing Technologies in Architectural Design and Construction:
A Systematic Literature Review - Riegger Felix, Zäh Michael (2022-08)
Additive Manufacturing of Steel-Reinforcements:
Integration of WAAM Reinforcements in Particle-Bed 3D Printing with Selective Cement-Paste-Intrusion - Barjuei Erfan, Courteille Eric, Rangeard Damien, Marie F. et al. (2022-07)
Real-Time Vision-Based Control of Industrial Manipulators for Layer-Width Setting in Concrete 3D Printing Applications - Tošić Zlata, Eichenauer Martin, Ivaniuk Egor, Lordick Daniel et al. (2022-07)
Design and Optimization of Free-Form Surfaces for Modular Concrete 3D Printing - Ivaniuk Egor, Eichenauer Martin, Tošić Zlata, Müller Steffen et al. (2022-05)
3D Printing and Assembling of Frame Modules Using Printable Strain-Hardening Cement-Based Composites - Bedarf Patrick, Szabó Anna, Zanini Michele, Heusi Alex et al. (2022-04)
Robotic 3D Printing of Mineral Foam for a Lightweight Composite Concrete Slab - Wu Hao, Li Ziyan, Zhou Xinjie, Wu Xinyu et al. (2022-04)
Digital Design and Fabrication of a 3D Concrete Printed Funicular Spatial Structure - Park Min, Cheon Gain, Alemayehu Robel, Ju Young et al. (2022-04)
Seismic Performance of F3D Free-Form Structures Using Small-Scale Shaking Table Tests - Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2022-04)
3D Printing Devices and Reinforcing Techniques for Extruded Cement-Based Materials:
A Review - Buswell Richard, Xu Jie, Becker Daniel, Dobrzanski James et al. (2022-04)
Geometric Quality Assurance for 3D Concrete Printing and Hybrid Construction Manufacturing Using a Standardised Test Part for Benchmarking Capability - Liu Jianan, Wang Zhenjun, Zhao Xin, Yu Cong et al. (2022-03)
Quantitative Evaluations on Influences of Aggregate Surface Texture on Interfacial Adhesion Using 3D Printing Aggregate - Guamán-Rivera Robert, Martínez-Rocamora Alejandro, García-Alvarado Rodrigo, Muñoz-Sanguinetti Claudia et al. (2022-02)
Recent Developments and Challenges of 3D Printed Construction:
A Review of Research Fronts - Xu Zhen, Song Tao, Guo Shuai, Peng Jiangtao et al. (2021-10)
Robotics Technologies Aided for 3D Printing in Construction:
A Review - Wang Li, Ma Hui, Li Zhijian, Ma Guowei et al. (2021-07)
Cementitious Composites Blending with High Belite-Sulfoaluminate and Medium-Heat Portland Cements for Large-Scale 3D Printing - Duarte Gonçalo, Brown Nathan, Memari Ali, Duarte José (2021-07)
Learning from Historical Structures under Compression for Concrete 3D Printing Construction - Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
Mix-Design Concepts for 3D Printable Concrete:
A Review - Xiao Jianzhuang, Ji Guangchao, Zhang Yamei, Ma Guowei et al. (2021-06)
Large-Scale 3D Printing Concrete Technology:
Current Status and Future Opportunities - Hoffmann Marcin, Żarkiewicz Krzysztof, Zieliński Adam, Skibicki Szymon et al. (2021-05)
Foundation Piles:
A New Feature for Concrete 3D Printers - Ning Xin, Liu Tong, Wu Chunlin, Wang Chao (2021-04)
3D Printing in Construction:
Current Status, Implementation Hindrances, and Development Agenda - Weng Yiwei, Mohamed Nisar, Lee Brian, Gan Nicole et al. (2021-02)
Extracting BIM Information for Lattice Tool-Path-Planning in Digital Concrete Printing with Developed Dynamo Script:
A Case Study - Lim Jian, Zhang Xu, Ting Guan, Pham Quang-Cuong (2021-02)
Stress-Cognizant 3D Printing of Free-Form Concrete Structures - Singh P., Sreerag K. (2020-12)
Additive Manufacturing Through Digital Concrete by Extrusion- and Non-Extrusion-Method - Krotov Oleg, Lazarev Yuriy, Velichkin Viktor, Petrochenko Marina et al. (2020-11)
The Multi-Storey Concrete Printing Construction Technology - Sambucci Matteo, Marini Danilo, Sibai Abbas, Valente Marco (2020-08)
Preliminary Mechanical Analysis of Rubber-Cement Composites Suitable for Additive Process Construction - Li Zhijian, Wang Li, Ma Guowei, Sanjayan Jay et al. (2020-07)
Strength and Ductility Enhancement of 3D Printing Structure Reinforced by Embedding Continuous Micro-Cables - Hoffmann Marcin, Skibicki Szymon, Pankratow Paweł, Zieliński Adam et al. (2020-04)
Automation in the Construction of a 3D Printed Concrete Wall with the Use of a Lintel Gripper
BibTeX
@article{lim_weng_pham.2020.3PoCCSUAMF,
author = "Jian Hui Lim and Yiwei Weng and Quang-Cuong Pham",
title = "3D Printing of Curved Concrete Surfaces Using Adaptable Membrane Formwork",
doi = "10.1016/j.conbuildmat.2019.117075",
year = "2020",
journal = "Construction and Building Materials",
volume = "232",
}
Formatted Citation
J. H. Lim, Y. Weng and Q.-C. Pham, “3D Printing of Curved Concrete Surfaces Using Adaptable Membrane Formwork”, Construction and Building Materials, vol. 232, 2020, doi: 10.1016/j.conbuildmat.2019.117075.
Lim, Jian Hui, Yiwei Weng, and Quang-Cuong Pham. “3D Printing of Curved Concrete Surfaces Using Adaptable Membrane Formwork”. Construction and Building Materials 232 (2020). https://doi.org/10.1016/j.conbuildmat.2019.117075.