#reinforcement¶

Keywords by Co - Occurrence¶

#print (393) #concrete (352) #fiber (238) #performance (80) #composite (77)

1. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-01)
   Performance of Lightweight, Reinforced, and Assemblable 3D-Printed Concrete Columns with Low-Carbon Engineered Cementitious Composites
2. Sawicki Bartłomiej, Chen Zhuo, Leusmann Thorsten, Kloft Harald (2026-01)
   Shotcrete 3D Printed Reinforced Concrete Beam:
   Design, Testing, and Comparison Against Conventional Cast Reinforced Concrete Solution
3. Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2026-01)
   Improving Bond Performance of 3D-Printable Earth-Based Mortar Reinforced with Jute Fibers
4. Wang Xiangyu, Wang Sizhe, Deng North, Liu Zhenbang et al. (2026-01)
   Robotic Rebar Insertion and Grouting for Reinforcement of 3D Printed Concrete:
   Technique Development and Bond Behavior Characterization
5. Aroso Francisca, Reis Rui, Brandão Filipe, Figueiredo Bruno et al. (2026-01)
   Assessing Orthotropic Mechanical Performance and Digital Twin of Robotic 3D Printed Cementitious Mortars with Fibers and Metal Reinforcements
6. Brandão Filipe, Dias José, Aroso Francisca, Reis Rui et al. (2026-01)
   Upcycling of Waste Fibers:
   Enhancing Structural Integrity in 3DCP Through Fiber Reinforcement
7. Cong Long-Yu, Zhang Fang, Qian Yong-Jiu (2025-12)
   Flexural Behavior Investigation of RC Beams with FRP-Reinforced 3D-Printed ECC Permanent Formwork
8. Cui Xiaoshuang, Pu Xianghao, Zhang Dongyang, Li Weihong et al. (2025-12)
   Study on the Mechanical Properties of 3D-Printed Continuous Jute Yarn-Reinforced Concrete
9. Liang Xiangzhou, Li Jinqian, Li Ziwei, Wang Qiang (2025-12)
   Experimental and Analytical Investigation of the Shear Behavior of the Developed BFRP Reinforced 3D Printed Composite Beams with U-Shaped Seawater Sea-Sand ECC Formwork
10. Nguyen Vuong, Jie Cheah, Zhang Y., Wong Hong (2025-12)
    Effect of Infill Architecture on Structural Performance and Sustainability of 3D-Printed Reinforced Concrete Columns
11. Eisazadeh Hamid, Chatroudi Narges, Alizadeh Roozbeh (2025-12)
    AI-Based Prediction and Numerical Analysis of Mechanical and Microstructural Parameters of Carbon Fiber Reinforced 3D Printed Composites
12. Deng North, Wang Sizhe, Li Mingyang, Wang Xiangyu et al. (2025-12)
    A Perforated Strip-Based Three-Dimensional Reinforcement Strategy for 3D Printed Concrete:
    Flexural Testing of Beams as a Proof of Concept
13. Huang Qunyi, Huang Qingyu, Yang Hong, Zhang Jiahang et al. (2025-12)
    Research on the Workability of 3D Printed Fiber-Reinforced Concrete Materials
14. Slavcheva Galina, Levchenko Artem, Artamonova Olga, Karakchi-Ogli Davut et al. (2025-12)
    Mechanical Behavior and Reinforcement Efficiency of 3D Printed Concrete Under Compression, Tension, and Bending
15. Xiao Wei (2025-12)
    Research on the Mechanical and Durability Properties of Carbon Fiber Reinforced 3D Printed Concrete
16. Zhang Genbao, Chen Lingke, Liu Miao, Morsy Amr et al. (2025-12)
    Enhancing the Shear Properties of U-Shaped Steel Wire Mesh Reinforced 3D Printed Composites
17. Koneswaran Bahirathan, Rajeev Pathmanathan, Sanjayan Jay (2025-12)
    3D Concrete-Printed Geocell for Reinforcing Unbound Granular Pavement Layers
18. Sun Yuhang, Yang Xiaojie, Liu Xiongfei, Ma Guowei et al. (2025-12)
    Coordinated Spray-Based 3D Printing of Reinforced Concrete Structure:
    A Multi-Angle Strategy for Blockage Mitigation
19. Dörrie Robin, Megnet Manuel, David Martin, Dröder Klaus et al. (2025-12)
    Integration of Discrete Reinforcement Elements for Shotcrete 3D Printing of Complex Structures
20. Jacobi Ando, Zöllner Jan-Phillip, Hack Norman, Mai (née Dressler) Inka (2025-12)
    Encasement of Pre-Placed Reinforcement in Injection 3D Concrete Printing:
    The Effect of Rheology and Process Parameters
21. Sando Mona, Alves Santos Sara, Worms Paul, Gurlo Aleksander et al. (2025-12)
    Evaluation of Continuous Epoxy-Impregnated Carbon Fiber Reinforcement in a 3D-Printable Geopolymer Composite
22. Knychalla Bruno, Wiesner Christian, Sonnleitner Patrick, Kowalczyk Magdalena et al. (2025-12)
    Integrated Fiber Forms:
    Functionally Integrated Slab Systems Through Additive Manufacturing and Natural Fiber Reinforcement
23. Tong Zhongling, Guan Qingtao, Elabbasy Ahmed, Ateah Ali et al. (2025-12)
    Empowering 3D Printed Concrete:
    Discovering the Impact of Steel Fiber Reinforcement on Mechanical Performance
24. Telichko Victor, Slavcheva Galina, Levchenko Artem (2025-12)
    Experimentally Verified FE Model of Bending Reinforced 3D-Printed Concrete Elements
25. Tenesesku Vladyslav (2025-11)
    Technological Aspects of Fabricating a Reinforced Concrete Shell Using 3D Concrete Printing
26. Manickavasakam Karnan, Huri Mohammed, Kharma Khaled, Hosan Anwar et al. (2025-11)
    Smart 3D-Printed Concrete:
    Recent Advances in Self-Sensing Mix Design and Functional Reinforcements
27. Xia Chen, Lee Chang, Leifer Max, Zheng Bujingda (2025-11)
    Additive Reinforced Concrete for Multifunctional Construction Component
28. Tang Can, Zhou Yujie, Mehmood Awais, Rania Chlihi et al. (2025-11)
    A Novel 3D-Printed Negative Poisson's Ratio Grid-Reinforced Cement-Based Composite Wall Structure:
    Design, Fabrication, and Compressive Properties
29. Sun Yan, Du Guoqiang, Mudasir Maryam (2025-11)
    Rheological Investigations of Fresh Fiber-Reinforced Cementitious Composites Using Hydrophobic / Hydrophilic UHMWPE Fibers for 3D Concrete Printing Evaluation
30. Khalid Lawand, Mermerdaş Kasım, Ekmen Şevin, Khidhir Bzeni Dillshad (2025-11)
    Optimization of Fresh and Hardened Properties of Fiber-Reinforced 3D Printed Geopolymer Composites Using Response Surface Methodology:
    A Data-Driven Approach Based on Prior Experimental Studies
31. Zhu Binrong, Liu Xuhua, Wei Yang, Pan Jinlong (2025-11)
    Predicting the Tensile Performance of 3D-Printed PE Fiber-Reinforced ECC Based on Micromechanics Model
32. Zeng Jun-Jie, Jiang Yuan, Yan Zitong, Sun Hou-Qi et al. (2025-11)
    3D Printing of Continuous Carbon Fiber-Reinforced Polymer Reinforcement for Concrete Columns
33. Liu Xiongfei, Wang Haonan, Chen Jinnan, Sun Yuhang et al. (2025-11)
    Fiber Orientation Control in Spray-Based 3D Printed Steel Fiber Reinforced Concrete
34. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-11)
    Examining the Multi-Scale Toughening Mechanisms and Mechanical Anisotropic Behavior of 3D Printed Concrete Reinforced with Calcium Sulfate Whiskers and Mixed Fibers
35. Chen Wenguang, Yu Jie, Ye Junhong, Yu Jiangtao et al. (2025-11)
    3D Printed High-Performance Fiber-Reinforced Cementitious Composites:
    Fresh, Mechanical, and Microstructural Properties
36. Albostami Asad, Mohammad Malek, Ismael Bashar, Hamd Rwayda (2025-10)
    Optimized Strength Predictions for 3D Printed Fiber-Reinforced Concrete:
    Machine Learning-Driven Insights
37. Shang Yuqing, Yu Zheming, Ma Wei, Wei Jun et al. (2025-10)
    Research on 3D Printing Materials and Printing Parameters of Basalt Fiber Reinforced Concrete
38. Ye Fan, Ren Xiaodan (2025-10)
    A Eulerian Circuit-Based Reinforcement Learning Path Optimization Method for 3D Concrete Printing
39. Jamifar Vahid, Eskandari‐Naddaf Hamid, Dehestani Mehdi (2025-10)
    Optimizing Electric Arc Furnace Dust Utilization in 3D Printed Reinforced Cement Paste Using D‐Optimal Design of Experiments and Gray Wolf Optimization
40. Pfleger Marc-Patrick, Radl Elisabeth, Sam Nina, Vill Markus (2025-10)
    3D Concrete Printing of Thin-Walled Load-Bearing Reinforced Structures
41. Drumond Pedro, Milagres Geysiane, Parassen Paloma, Santos Luana et al. (2025-10)
    Assessment of Printing Direction in Flexural Tests of 3D Printed Reinforced Concrete Beams
42. Ding Tao, Zhu Ruitao, Yu Kequan, Xiao Jianzhuang (2025-10)
    Direct Tensile Behavior of Three-Dimensional-Printable Steel Fiber-Reinforced Ultrahigh Performance Concrete
43. Wang Huai, Li Xiulin, Gong Hao, Xu Jingjie et al. (2025-10)
    Thermal and Mechanical Properties of 3D-Printed Fiber-Reinforced Lightweight Concrete Based on Air Entrainment and Hollow Glass Microspheres
44. Varghese Renny, Rangel Bárbara, Maia Lino (2025-10)
    Strength, Structure, and Sustainability in 3D-Printed Concrete Using Different Types of Fiber Reinforcements
45. Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk, Seepim Sirakan et al. (2025-10)
    Investigation of Out-of-Plane Bending Behaviour of 3D-Printed Reinforced and Unreinforced Walls
46. Teng Fei, Yang Minxin, Yu Jie, Weng Yiwei et al. (2025-10)
    Multi-Material 3D Concrete Printing:
    Automated Hybrid Reinforcements Using Textile and Strain-Hardening Cementitious Composites
47. Ali Muhammad, Qian Hui, Umar Muhammad, Fenglin Liu et al. (2025-10)
    Rheological, Mechanical, and Self-Recovery Performance of 3D-Printed ECC Reinforced with Shape Memory Alloy Fibers
48. Delavar Mohammad, Aslani Farhad, Sercombe Tim (2025-10)
    Cracking Behaviour in 3D Concrete Printed Fiber-Reinforced Cementitious Composites:
    A Review
49. Lale Erol, Ayhan Bahar, Ahmed Ayesha, Irizarry Elmer et al. (2025-10)
    Computational Simulations Fresh-to-Solid Transition for Additive Manufacturing of Ultra-High-Performance Fiber Reinforced Concrete
50. Rudziewicz Magdalena, Maroszek Marcin, Hebda Marek (2025-09)
    Comparison of Porosity and Thermal Conductivity of Concrete and Alkali-Activated Hybrid Binders in 3D-Printed Fiber-Reinforced Foamed Composites
51. Philip Nivin, Jędrzejewska Agnieszka, Mathew Ashitta, Uthuppan Susan (2025-09)
    Steel Fiber Reinforcement for Improved Structural Performance and Durability of 3D Printed Mortar in Marine Environments
52. Wang Li, Fan Haichen, Wang Qiang, Bai Gang et al. (2025-09)
    Design Method and Force Transmission Mechanism of 3D Printed Concrete Truss Beams Reinforced with 3D Conical Reinforcement
53. Luo Surong, Jin Wenhao, Zhang Zhaorui, Zhang Kaijian (2025-09)
    Constitutive Relationship of 3D Printed Fiber Reinforced Recycled Sand Concrete Under Uniaxial Compression
54. Syed Sajid, Abid Khasim, Khan Majid (2025-09)
    An Interpretable Machine Learning Approach for Predicting Reinforcement Bond Performance in 3D Concrete Printing
55. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
    Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
    A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
56. Maurya Shubham, Kumar Vijay, Panda Biranchi, Borsaikia Arun et al. (2025-09)
    Inline Polymer Cable Reinforcement in 3D Concrete Printing with a Special Nozzle
57. Wang Xiaoqi, Liu Xing, Xu Yanling, Cao Jianfu et al. (2025-08)
    A General Adaptive Layer Height Continuous Path Planning Algorithm for Concrete 3D Printing of Complex Porous Structures Based on Multi-Objective Optimization and Reinforcement Learning
58. Mak Bunleang, Kim Tae, Dong Won-Jun, Shim Chang (2025-08)
    Crack Width Investigation of Reinforced Concrete Beam with 3D Concrete Printed Formwork Using Modified Parameters
59. Zhang Yifan, Aslani Farhad (2025-08)
    Mechanical and Ultrasonic Pulse Velocity Performance of 3D Printed Rubberised Cementitious Composites Reinforced with PVA Fibers
60. Motiani Ronak, Sylvain Saha, Dalal Sejal, Vora Jay et al. (2025-08)
    Innovative Reinforcement Techniques for 3D-Printed Concrete:
    The Impact of Shape Memory Alloys on Flexural Strength and Crack Mitigation
61. Lu Qianyang, Mei Song, Ateah Ali, Alsubeai Ali et al. (2025-08)
    Investigating the Strength Performance of 3D Printed Fiber-Reinforced Concrete Using Applicable Predictive Models
62. Shilar Fatheali, Ganachari Sharanabasava, Osman N., Ramesh S. et al. (2025-08)
    Advancements in Fiber-Reinforced Geopolymer Along with 3D Printed and Nano Concrete in Sustainable Construction
63. Mani Aravindhraj, Sekar Muthu (2025-08)
    NDT Techniques for Evaluating Mechanical Properties in Green and Fiber-Reinforced 3D Printable Mixes
64. Yousaf Arslan, Khan Shoukat, Koç Muammer (2025-07)
    Material, Process, and Design Optimization of Local Earthen Soil Reinforced with Natural Fiber Waste and Nanoclay for 3DP of Functional Structures
65. Ding Tao, Dong Haining, Sikora Paweł, Lin Guan (2025-07)
    3D Printed Concrete Reinforced with Flexible Fiber Reinforced Polymer Strips or Grids:
    Concept and Bond Tests
66. Yang Jie, Xu Ke, He Haijie (2025-07)
    Materials, Performance Studies, and Application Progress of Fiber-Reinforced 3D-Printed Concrete
67. Alnemrawi Bara'a, Rousan Rajai, Abdalla Khairedin, Lagaros Nikos (2025-06)
    Evaluating the Structural Performance of 3D Printed FRCC Beams with Anchoring Reinforcement:
    Material, Geometry, and Loading Perspectives
68. Guan Jingyuan, Wang Li, Bai Gang, Ma Guowei (2025-06)
    Enhancing 3D Printed Formwork Columns via FRP Hoop Shear Connection Reinforcement
69. Khodadadi Nima, Roghani Hossein, Caso Francisco, Kenawy El‐Sayed et al. (2025-06)
    Machine Learning Approach for the Flexural Strength of 3D‐Printed Fiber‐reinforced Concrete Based on the Meta‐heuristic Algorithm
70. Sagyntay Mukhagali, Storch Florian, Mustafa Azamat, Plaschnick Paul et al. (2025-06)
    Automated Production of 3D Printed Сoncrete Structures with Integrated Reinforcement Mesh Based on Standard Reinforcement Bars
71. Wang Xiaoqi, Zuo Tianyi, Xu Yanling, Liu Xing et al. (2025-06)
    Reinforcement Learning-Based Continuous Path Planning and Automated Concrete 3D Printing of Complex Hollow Components
72. Ewerz Johannes, Pfleger Marc-Patrick, Radl Elisabeth, Huber Patrick (2025-06)
    Concrete 3D Printing and Reinforcement:
    Determination of Bond Strength Through Pull-Out Tests
73. Alizamir Meysam, Kim Sungwon, Ikram Rana, Ahmed Kaywan et al. (2025-06)
    A Reliable Hybrid Extreme Learning Machine-Metaheuristic Framework for Enhanced Strength Prediction of 3D-Printed Fiber-Reinforced Concrete
74. Li Shuai, Liu Junli, Cheng Chi-Tsun, Xuan Hung et al. (2025-06)
    Design and Performance of 3D Printed Bouligand Steel Fiber-Reinforced Cementitious Composite Curved Beams
75. Pham Thi, Nguyen Thi, Huang Jie (2025-06)
    Experimental Study on Anisotropic Mechanical Properties of 3D Reinforced Concrete with Discrete Polyethylene Fibers
76. Dai Pengfei, Luo Zhenhua, Wang Yalun, Mbabazi Justin et al. (2025-06)
    Waste Plastic Fiber Reinforced Cementitious Cavity Structures Manufactured by Mortar Extrusion 3D Printing
77. Tinoco Matheus, Márquez Álvaro, Ramallo Laura, Barluenga Gonzalo et al. (2025-06)
    Fresh and Hardened Properties of Cellulose Fiber-Reinforced Mortars for 3D Printing in Construction
78. Hopkins Ben, Si Wen, Khan Mehran, McNally Ciaran (2025-06)
    Recent Advancements in Polypropylene Fiber-Reinforced 3D-Printed Concrete:
    Insights into Mix Ratios, Testing Procedures, and Material Behaviour
79. Kim Tae, Oh Sangwoo, Lee Jinsuk, Dong Won-Jun et al. (2025-05)
    Effects of 3D-Printed Concrete Permanent Formwork on the Flexural Behavior of Reinforced Concrete Beams:
    Experimental and Analytical Investigations
80. Ding Tao, Peng Zechen, Dong Haining (2025-05)
    Mechanical Properties of CFRP Grid Reinforced 3D Printed Concrete Arch Structures
81. Ahadi Bahram, Valiente López María (2025-05)
    Zigzag Reinforcement Method for 3D Concrete Printing
82. Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2025-05)
    Flexural Performance of Glass Fiber Textile Reinforced 3D Printed Concrete
83. Asif Usama (2025-05)
    Comparative Analysis of Evolutionary Computational Methods for Predicting Mechanical Properties of Fiber-Reinforced 3D Printed Concrete
84. Zahabizadeh Behzad, Pereira João, Pereira Eduardo, Cunha Vítor (2025-05)
    Self-Healing Assessment of Fiber Reinforced Cementitious Mortars Developed for 3D Concrete Printing:
    Recovery of Mechanical Performance and Self-Sealing Capability
85. Gantner Stefan, Rennen Philipp, Amiri Fatemeh, Rothe Tom et al. (2025-05)
    Robotic Frame Winding:
    Prefabricated Fiber Structures as Formwork and Reinforcement for Digitally Fabricated Shell-Like Concrete Elements
86. Liu Xingzi, Xu Jie, Dobrzanski James, Kolawole John et al. (2025-05)
    Factors Affecting the Flexural Performance of Reinforced 3D Printed Concrete Beams
87. Khanverdi Mohsen, Das Sreekanta (2025-05)
    Performance of Full-Scale 3D-Printed Concrete Walls:
    Effects of Vertical Reinforcements and Window Opening
88. Chandra Jimmy, Halim Alvin, Budiman Franky, Pudjisuryadi Pamuda et al. (2025-05)
    Experimental Study of Bond Strength of Embedded Steel Reinforcement in Vibration-Based 3D Printed Concrete Mortar
89. Dabbaghisouraki Farshad, Tanhadoust Amin, Nehdi Moncef (2025-04)
    Fiber Reinforcement Strategies in 3D Concrete Printing:
    Addressing Challenges and Identifying Research Gaps
90. Hu Xiangcheng, Shazad Qamar, Li Fangyuan (2025-04)
    Influence of the Shear Span Ratio on the Shear Performance of 3D-Printed Concrete Beams Without Web Reinforcement
91. Si Qi, Zhang Wenna, Pan Zhihong, Zheng Jianqiang et al. (2025-04)
    Study on the Mechanical and Durability Properties of 3D-Printed Bamboo Fiber-Reinforced Concrete
92. Cao Xiangpeng, Cui Hongzhi (2025-04)
    Simple Floor Nail Placement Technique to Reinforce 3D-Printed Concrete:
    An Experimental Investigation
93. Rudziewicz Magdalena, Hutyra Adam, Maroszek Marcin, Korniejenko Kinga et al. (2025-04)
    3D-Printed Lightweight Foamed Concrete with Dispersed Reinforcement
94. Sørensen Jesper, Stang Henrik (2025-04)
    Experimental Investigation of the Fatigue Behavior of 3D Printed Steel Fiber Reinforced Concrete
95. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
    Effect of Nozzle Stand-Off Distance, Printing Interval, and Inclusion of Glass Fiber Mesh Reinforcement in 3D Printed Concrete
96. Liu Qiong, Wang Qiming, Sun Chang, Singh Amardeep et al. (2025-04)
    Compressive Performance and Damage Evolution of Concrete Short Columns with Shell-Filling Structure Confined by Continuous Fiber Reinforced 3D Printed Mortar
97. İlcan Hüseyin, Külak Adnan, Şahin Oğuzhan, Aldemir Alper et al. (2025-04)
    Reinforcement and Modular System for 3DCP Geopolymer Structures Using Construction and Demolition Waste
98. Liu Xiongfei, Yang Xiaojie, Sun Yuhang (2025-04)
    Synchronous Construction of Spray-Based 3D Printed Reinforced Concrete Structure:
    Effect of 2.5D Rebar Structure on the Flexural Performance of Slab
99. Liu Chao, Liang Zhan, Liu Huawei, Wu Yiwen et al. (2025-03)
    Seismic Performance of 3D Printed Reinforced Concrete Walls:
    Experimental Study and Numerical Simulation
100. Xia Kailun, Chen Yuning, Zhang Zedi, Wang Wei et al. (2025-03)
     In-Situ Crosslinked Nano-SiO2 Reinforced Alginate Bio-Textile for Mitigating Plastic Shrinkage in 3D Printed Concrete
101. Zat Tuani, Schuster Sílvio, Schmitt Duarte Ester, Freitas Daudt Natália et al. (2025-03)
     Rheological Properties of High-Performance Concrete Reinforced with Microfibers and Their Effects on 3D Printing Process
102. Wang Qiang, Yang Wenwei, Wang Li, Bai Gang et al. (2025-03)
     Reinforcement Design and Structural Performance for the Topology Optimized 3D Printed Concrete Truss Beams
103. Rajendran Naveenkumar, Runge Troy, Bergman Richard, Nepal Prakash et al. (2025-03)
     Economic and Environmental Impact Analysis of Cellulose Nanocrystal-Reinforced Cementitious Mixture in 3D Printing
104. Miri Zahra, Baaj Hassan, Polak Maria (2025-03)
     3D-Printed Concrete Bridges:
     Material, Design, Construction, and Reinforcement
105. Şahin Hatice, Kaya Yahya, Akgümüş Fatih, Mardani Naz et al. (2025-03)
     Degradation of Mechanical Properties of 3D Fiber Reinforced Printed Concrete Mixtures Exposed to Elevated Temperatures
106. Bakhshi Amir, Zafar Muhammad, Hojati Maryam (2025-02)
     A Study on Achieving High Tensile Ductility in 3D-Printable Engineered Cementitious Composites Reinforced with 8mm Fibers
107. Salaimanimagudam M., Jayaprakash Jaganathan, Anwar Mohammed (2025-02)
     Selection of Reinforcement Incorporation Method for 3D Printed Concrete Using MCDM
108. Mortada Youssef, Hammoud Ahmad, Masoud Laith, Wyrzykowski Mateusz et al. (2025-02)
     3D Printable Ca(OH)2-Based Geopolymer Concrete with Steel Fiber Reinforcement
109. Shen Qiang, Sun Dongpu, Lu Chenyu, Zhang Zhigang et al. (2025-02)
     Fresh and Anisotropic-Mechanical Properties of Polyoxymethylene Fibers Reinforced 3D Printable Cementitious Composites
110. Engel Sven, Hegger Josef, Claßen Martin (2025-02)
     Multimodal Automated Fabrication with Concrete:
     Case-Study and Structural Performance of Ribbed CFRP-Reinforced Concrete Ceiling
111. Liu Xinhao, Hu Jiajun, Guo Xiaolu (2025-01)
     Improved Interlayer-Bonding of 3D Printed Fiber-Reinforced Geopolymer by Healing-Agents:
     Properties, Mechanism, and Environmental Impacts
112. Guan Jingyuan, Wang Li, Wan Qian, Ma Guowei (2025-01)
     Material and Structural Fatigue-Performance of 18m Span Reinforced Arch Structure Manufactured by 3D Printing Concrete as Permanent Formwork
113. Caron Jean-François, Ducoulombier Nicolas, Demont Léo (2025-01)
     Reinforcement of Printed Structures
114. Sun Junbo, Wang Yufei, Yang Xin, Wang Haihong et al. (2025-01)
     Red Mud Utilization in Fiber-Reinforced 3D Printed Concrete:
     Mechanical Properties and Environmental Impact Analysis
115. Chen Meng, Li Jiahui, Zhang Tong, Zhang Mingzhong (2025-01)
     3D Printability of Recycled Steel-Fiber-Reinforced Ultra-High-Performance Concrete
116. Lyu Qifeng, Wang Yalun, Chen Dongjian, Liu Shiyuan et al. (2025-01)
     Energy Storage Properties and Mechanical Strengths of 3D Printed Porous Concrete Structural Supercapacitors Reinforced by Electrodes Made of Carbon-Black-Coated Ni Foam
117. Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2025-01)
     Assessment of the Suitability of Carbon Long Fibers as Reinforcement for Additively Manufactured Components
118. Aydoğan Olcay, Kelek Bedirhan, Dittel Gözdem, Bhat Shantanu et al. (2025-01)
     Performance of 3D Printed Mortar with Varying Textile Reinforcement Properties
119. Nan Bo, Qiao Youxin, Leng Junjie, Bai Yikui (2025-01)
     Advancing Structural Reinforcement in 3D Printed Concrete:
     Current Methods, Challenges, and Innovations
120. Richter Christiane, Maurer Christian, Jungwirth Jörg (2025-01)
     Reinforcement-Strategies for Additively Manufactured Concrete Elements:
     Exploring the Potential of Different Reinforcement-Materials for Selective Cement-Activation
121. Wang Hailong, Shen Junyi, Sun Xiaoyan, Dong Weiwei et al. (2024-12)
     Numerical Investigation on Shear Behavior of Reinforced Concrete Beam with 3D Printed Concrete Permanent Formwork
122. Li Yeou-Fong, Liang Yu-Fang, Syu Jin-Yuan, Huang Chi-Hong et al. (2024-12)
     Static and Dynamic Mechanical Characteristics of 3D Printed Anisotropic Basalt Fiber-Reinforced Cement Mortar
123. Huang Junxiang, Peng Zeqin, Tan Xianzhong, Gong Guofang et al. (2024-12)
     Mechanism Analysis of the Magnetic Field-Assisted 3D Printed Steel-Fiber-Reinforced Concrete
124. Neef Tobias, Kalthoff Matthias, Müller Steffen, Cruz Cynthia et al. (2024-12)
     Mineral-Impregnated Carbon-Fibers-Reinforcement for Concrete Elements Manufactured by Extrusion
125. Li Shuai, Khieu Hai, Black Jay, Nguyen Hung-Xuan et al. (2024-12)
     Two-Scale 3D Printed Steel-Fiber-Reinforcements-Strategy for Concrete Structures
126. Cao Xiangpeng, Wu Shuoli, Cui Hongzhi (2024-12)
     Experimental Study on In-Situ Mesh Fabrication for Reinforcing 3D Printed Concrete
127. Du Longyu, Zhou Jiehang, Lai Jianzhong, Yin Xuexiang et al. (2024-12)
     Dynamic Damage Behavior and Anisotropic Mechanism of 3D Printed Reinforced Concrete Subjected to Penetration
128. Alarrak Rashed, Brand Alexander (2024-12)
     Mechanical Performance of Extruded Functionally-Graded Fiber-Reinforced Mortar with Targeted Fiber-Injection
129. Hass Lauri, Bos Freek, Salet Theo (2024-12)
     Bond Governed Interactions Between Helical Reinforcement and 3D Printed Concrete
130. Guan Jingyuan, Wang Li, Huang Yimiao, Ma Guowei (2024-12)
     3D Printed Concrete Composite Slabs Fabricated by Pre-Stressed Reinforced Permanent Formwork:
     Design, Manufacturing, and Performance
131. Cruz Cynthia, Bosbach Sven, Kalthoff Matthias, Beckmann Birgit et al. (2024-12)
     Material-Minimized Rib and Honeycomb Slabs Made of Extruded Carbon-Reinforced Concrete Webs
132. Huang Bo, Ge Yutian, Wang Xiangyu, Wang Yufei et al. (2024-11)
     Recycled Ceramic-Brick-Powder Utilization in Fiber-Reinforced 3D Printing Concrete:
     An Eco-Friendly Substitute to Conventional Fine Aggregates
133. Rasel Risul, Hossain Md, Zubayer Md, Zhang Chaoqun (2024-11)
     Exploring the Fresh and Rheology Properties of 3D Printed Concrete with Fiber-Reinforced Composites:
     A Novel Approach Using Machine Learning Techniques
134. Luo Surong, Jin Wenhao, Wu Weihong, Zhang Kaijian (2024-11)
     Rheological and Mechanical Properties of Polyformaldehyde-Fiber-Reinforced 3D Printed High-Strength Concrete with the Addition of Fly-Ash
135. Lin Manfang, Yu Kequan (2024-11)
     A Rapid Reinforcement-Technique Using FRP and Steel-Wire Mesh in 3D Printed ECC Beams
136. Rothe Tom, Gantner Stefan, Hack Norman, Hühne Christian (2024-11)
     Characterisation of the Alkaline-Resistance of Fiber-Reinforcement Strands Produced in a Dynamic Fiber Winding Process for 3D Concrete Printing
137. Arif Muhammad, Jan Faizullah, Rezzoug Aïssa, Afridi Muhammad et al. (2024-11)
     Data-Driven Models for Predicting Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Interpretable Machine Learning Algorithms
138. Mandala Venugopal, Khan Mohd (2024-11)
     Experimental Investigations on Layered Functionally Graded Fiber-Reinforced Concrete
139. Lin Manfang, Li Lingzhi, Jiang Fangming, Ding Yao et al. (2024-11)
     Automated Reinforcement of 3D Printed Engineered Cementitious Composite Beams
140. Nashed Kabalan Ola, Ciblac Thierry, Marceau Sandrine, Roy Robert (2024-11)
     Advancing Raw Earth Reinforcement for 3D Printed Architecture:
     Durability-Assessment
141. Zhao Herui, Jiang Quan, Xia Yong, Liu Jian et al. (2024-11)
     Microbial-Induced Carbonate Reinforcement for 3D Printed Concrete:
     Testing in Printable and Mechanical Strength
142. Zeng Jun-Jie, Hu Xianwen, Sun Hou-Qi, Liu Yue et al. (2024-10)
     Triaxial Compressive Behavior of 3D Printed PE-Fiber-Reinforced Ultra-High-Performance Concrete
143. Liu Bing, Cheng Xiao-Ming, Wang Lian-Gang, Qian Kai (2024-10)
     Compressive Performance of PVA Fiber-Reinforced 3D Concrete Printing Permanent Formwork Composite Columns Reinforced with BFRP-Bars
144. Liu Chao, Zhang Yukun, Liu Huawei, Wu Yiwen et al. (2024-10)
     Inter-Layer Reinforced 3D Printed Concrete with Recycled Coarse Aggregate:
     Shear Properties and Enhancement Methods
145. Varela Hugo, Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo et al. (2024-10)
     3D Printable Cement-Based Composites Reinforced with Sisal-Fibers:
     Rheology, Printability and Hardened Properties
146. Aminpour Nima, Memari Ali (2024-10)
     Numerical and Experimental Study on Reinforced 3DCP Walls Filled with Lightweight Concrete
147. Park Keunhyoung, Memari Ali, Hojati Maryam, Radlińska Aleksandra et al. (2024-10)
     Effects of Anisotropic Mechanical Behavior on Nominal Moment Capability of 3D Printed Concrete Beam with Reinforcement
148. Althoey Fadi, Zaid Osama, Ahmed Bilal, Elhadi Khaled (2024-10)
     Impact of Double Hooked Steel-Fibers and Nano-Kaolin-Clay on Fresh Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete
149. Ma Wei, Wang Guosheng, Zhou Yaya, Xu Qinghu et al. (2024-09)
     Polyacrylonitrile-Fiber-Reinforced 3D Printed Concrete:
     Effects of Fiber Length and Content
150. Kloft Harald, Sawicki Bartłomiej, Bos Freek, Dörrie Robin et al. (2024-09)
     Interaction of Reinforcement, Process, and Form in Digital Fabrication with Concrete
151. Curth Alexander, Pearl Natalie, Wissemann Emily, Cousin Tim et al. (2024-09)
     EarthWorks:
     Zero-Waste 3D Printed Earthen Formwork for Shape-Optimized, Reinforced Concrete Construction
152. Wang Qiang, Yang Wenwei, Wang Li, Zhang Dan et al. (2024-09)
     Flexural Performance of the Integrated Steel-Truss-Reinforced 3D Printed Concrete Beams:
     Experimental and Numerical Analysis
153. Han Kang, Gu Fei, Yang Huashan, Tian Xinchen et al. (2024-09)
     PVA-Fiber-Reinforced Red Mud-Based Geopolymer for 3D Printing:
     Printability, Mechanical Properties and Microanalysis
154. Reißig Silvia, Herdan Annika, Mechtcherine Viktor (2024-09)
     Rheological Behavior of Steel-Fiber-Reinforced Concrete in the Context of Additive Manufacturing
155. Neef Tobias, Mechtcherine Viktor (2024-09)
     Continuous Fiber-Reinforcement for Extrusion-Based 3D Concrete Printing
156. Ogura Hiroki, Hara Koichiro, Yamamoto Shinya, Abe Hiroyuki (2024-09)
     Flexural Performance of Fiber-Reinforced 3D Printed Concrete Beams with Axial Rebar
157. Tarhan Yeşim, Tarhan İsmail, Jacquet Yohan, Perrot Arnaud (2024-09)
     Mechanical Behavior of 3D Printed and Textile-Reinforced Eco-Friendly Composites
158. Nikravan Ata, Aydin Tolga, Özyurt Nilüfer, Bundur Zeynep (2024-09)
     Enhancing the Performance of 3D Printed Fiber-Reinforced Mortar:
     Synergistic Effects of Clays and Bacterial Cells as Viscosity-Modifying-Agents
159. Ma Xin-Rui, Wang Xian-Lin, Chen Shi-Zi (2024-09)
     Trustworthy Machine Learning-Enhanced 3D Concrete Printing:
     Predicting Bond Strength and Designing Reinforcement Embedment Length
160. Hojati Maryam, Sedghi Reza, Li Zhanzhao, Memari Ali et al. (2024-09)
     Flexural Strength of 3D Printed Concrete Beams:
     Exploring Barbed-Wire Reinforcement and Cross-Sectional Geometry
161. Rider Bo, Kurtis K., Stewart L. (2024-09)
     Quantification of Porosity and Sorptivity in Fiber-Reinforced 3D Printed Mortar:
     Connecting Material-Composition and Structural Performance
162. Nana W., Baz Bilal, Blachier Christian, Peraud Mickaël et al. (2024-09)
     Mechanical Performance of 3D Printed Fiber-Reinforced Concrete
163. Weger Daniel, Gartner Benjamin, Rausch Anne, Schießl-Pecka Angelika et al. (2024-09)
     Realization of a Reinforced SPI Façade:
     Direction-Dependent Material-Properties and Durability-Assessment
164. Mechtcherine Viktor, Taubert Markus, Müller Steffen, Butler Marko et al. (2024-09)
     Integration of Steel Reinforcement into Extrusion-Based 3D Concrete Printing of Monolithic Concrete Elements
165. Tasaki Haruto, Asakawa Tomoya, Kobayashi Noriyuki, Nishiwaki Tomoya et al. (2024-09)
     A Direction-Independent Reinforcement by Combination of Fiber-Reinforced Cementitious Composite and Automated Pin Insertion
166. Dias José, Brandão Filipe, Figueiredo Bruno, Cruz Paulo (2024-09)
     The Potential of Natural Fiber-Reinforcement in 3D Printed Concrete:
     A Review
167. Meibodi Mania, Lin Yuxin, Chen Hao (2024-09)
     Hybrid Approaches Towards 3D Concrete Printing for Lightweight Reinforced Concrete Structures
168. Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-09)
     Efficient Production of Reinforced Pre-Cast Concrete Elements Using Additive Manufactured, Integrated Formwork
169. Zhang Sisi, Claßen Martin, Olesch Mirco, Mäde Konrad et al. (2024-09)
     Prototypical Realization of Fully Automated 3D Printing of Reinforced Concrete Using AMoRC Method
170. Dörrie Robin, Kloft Harald, Sawicki Bartłomiej, Freund Niklas et al. (2024-09)
     Automated Reinforcement Integration in Shotcrete 3D Printing Through Green State Milling
171. Zat Tuani, Schmitt Duarte Ester, Webber Jaine, Matos Paulo et al. (2024-09)
     Comparison Between Yield-Stress-Measurements for Fiber-Reinforced 3D Concrete Printing
172. Kobayashi Noriyuki, Asakawa Tomoya, Nishiwaki Tomoya, Egawa Ryo et al. (2024-09)
     An Automated Pin Insertion Method for 3DCP and Its Reinforcement Effects on Beam Specimens
173. Zhao Cong, Wang Hailong, Sun Xiaoyan (2024-09)
     Cross-Layer Reinforcement Robot for 3D Printing Concrete:
     Hardware, Software, and Validation
174. Egawa Ryo, Nezu Shoichi, Nishijo Keisuke, Ohno Kazunori et al. (2024-09)
     Different Sized Metal Reinforcement Insertion System Using Cartridge Replacement Mechanism for 3D Concrete Printer
175. Bono Victor, Demont Léo, Ducoulombier Nicolas, Mesnil Romain et al. (2024-09)
     Large-Scale 3D Printing of a Shell Structure Reinforced by the Flow-Based Pultrusion Process
176. Sun Xiaoyan, Lin Xiqiang, He Huanan, Yang Hongyang et al. (2024-09)
     Steel Reinforced 3D Printing Concrete Housing Building and Its Modular Assembly Construction
177. Liu Bing, Chen Yuwen, Li Dongdong, Wang Yang et al. (2024-09)
     Study on the Fracture Behavior and Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete
178. Hou Shaodan, Wu Wenbo, Duan Zhenhua, Zhou Shuai et al. (2024-09)
     Rheology of Fiber-Reinforced Mortar for 3D Printing Construction:
     Effect of Recycled Hybrid-Powder and Polyethylene-Fiber
179. Amiri Fatemeh, Baghdadi Abtin, Kwon Hyunchul (2024-08)
     New Reinforcement Approach for Freeform Concrete Components Through Carbon Fiber 3D Printing
180. Bono Victor, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2024-08)
     Design, Structural Optimization and Fabrication of Concrete Shell Through Fiber-Reinforced 3D Printing
181. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-08)
     Time-Dependent Behavior of 3D Printed Fiber-Reinforced Limestone-Calcined-Clay-Cement Concrete Under Sustained Loadings
182. Fernand Muhirwa, Li Yaqi, Qian Qiwei, Chi Yin et al. (2024-08)
     Effects of Coarse Aggregates on 3D Printability and Mechanical Properties of Ultra-High-Performance Fiber-Reinforced Concrete
183. Ding Yao, Liu Jiepeng, Ou Xingjian, Nishiwaki Tomoya et al. (2024-08)
     3D Printing Hybrid-Fiber-Reinforced Engineered Cementitious Composites:
     Feasibility in Long-Open-Time Applications
184. Rudziewicz Magdalena, Maroszek Marcin, Setlak (nee Pławecka) Kinga, Góra Mateusz et al. (2024-08)
     Optimization of Foams-Polypropylene Fiber-Reinforced Concrete Mixtures Dedicated for 3D Printing
185. Yao Yiming, Bu Dechao, Yu Jiamian, Shao Lijing et al. (2024-08)
     Flexural Behavior of Textile Reinforced 3D Printed Concrete Under Quasi-Static and Dynamic Impact Loads
186. Nguyen Vuong, Tran Jonathan, San Ha Ngoc, Xie Yi et al. (2024-08)
     Blast-Resistance of 3D Printed Bouligand Concrete Panels Reinforced with Steel-Fibers:
     Numerical Investigations
187. Şahin Hatice, Akgümüş Fatih, Mardani Ali (2024-08)
     Mechanical and Rheological Properties of Fiber‐Reinforced 3D Printable Concrete in Terms of Fiber Content and Aspect Ratio
188. Li Xiaoteng, Newlands Moray, Jones Rod (2024-08)
     Performance of a Multi-Layer Aligned Steel-Fiber-Reinforced Concrete Beam:
     A Preliminary Investigation Towards 3D Printing
189. Alonso-Cañon Sara, Blanco-Fernandez Elena, Castro-Fresno Daniel, Yoris-Nobile Adrian et al. (2024-08)
     Comparison of Reinforcement-Fibers in 3D Printing Mortars Using Multi-Criteria Analysis
190. Xu Wen, Jiang Dengjie, Zhao Qian, Wang Linbing (2024-08)
     Study on Printability of 3D Printing Carbon-Fiber-Reinforced Eco-Friendly Concrete:
     Characterized by Fluidity and Consistency
191. Klik Przemysław, Cisowski Adam, Rządkowski Witold, Pyrzanowski Paweł et al. (2024-08)
     Investigation of Mechanical Properties of Structures Created with Use of Automatically Reinforced 3D Concrete Printing:
     Preliminary Study
192. Pemas Sotirios, Sougioultzi Konstantina, Kouroutzidou Chrysoula, Stefanidou Maria et al. (2024-07)
     Enhancing Clay-Based 3D Printed Mortars with Polymeric Mesh Reinforcement Techniques
193. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wang Sizhe et al. (2024-07)
     Axial Performances of the Steel-Rebar-Reinforced Column Confined by the Steel-Cable-Reinforced 3D Concrete Printing Permanent Formwork
194. Kladovasilakis Nikolaos, Pemas Sotirios, Pechlivani Eleftheria (2024-07)
     Computer-Aided Design of 3D Printed Clay-Based Composite Mortars Reinforced with Bio-Inspired Lattice Structures
195. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay (2024-07)
     Application of Textile Reinforcement for 3D Concrete Printed Structures
196. Nghia Vuong, Lim Jian, Nam Nguyen, Lu Bing et al. (2024-07)
     Automated Force-Sensitive Reinforcement for 3DCP
197. Mozaffari Salma, Kamravafar Rahasadat, Li Yunyan, Mata-Falcón Jaime et al. (2024-07)
     Leveraging Clay-Formwork 3D Printing for Reinforced-Concrete Construction
198. Babovic Neira, Laghi Vittoria, Kloft Harald (2024-07)
     Branching Structure for Reinforcement Anchorage Produced with Wire and Arc Additive Manufacturing Technique
199. Jiang Fangming, Lin Manfang, Yu Kequan (2024-07)
     Mechanical Properties of 3D Printed ECC Beams Reinforced with FRP Mesh
200. Kinomura Koji, Zhang Wenbo, Kawamura Keisuke (2024-07)
     Structural Performance of a Large Column with an Outer Shell Formed by Short-Fiber-Reinforced Mortar-Extrusion
201. Teng Fei, Zhang Dong, Li Heng, Weng Yiwei (2024-07)
     Feasibility Study on Reinforcement Placement with a BIM-Enabled Collaborative Robot System
202. Sariyev Bakytzhan, Konysbekov Alisher, Jexembayeva Assel, Konkanov Marat (2024-07)
     A Comparative Study of the Rheological Properties of a Fly-Ash-Based Geopolymer Reinforced with PP-Fiber for 3D Printing:
     An Experimental and Numerical Approach
203. Ivaniuk Egor, Tošić Zlata, Müller Steffen, Lordick Daniel et al. (2024-07)
     Automated Manufacturing of Reinforced Modules of Segmented Shells Based on 3D Printing with Strain-Hardening Cementitious Composites
204. Sun Chang, Li Jiawang, Liu Qiong, Chen Kailun et al. (2024-07)
     Compressive Performance and Damage Mechanism of Concrete Short Columns Confined by Steel-Wires-Reinforced 3DPM
205. Wang Jun, Zhang Xuanzheng, Liu Zhenhua, Zhao Jiasheng (2024-07)
     Study on the Effects of Printing Process and Reinforcement Materials on the Performance of 3D-Printed Glass Bead Insulation Mortar
206. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
     Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
207. Ramesh Akilesh, Rajeev Pathmanathan, Xu Shanqing, Sanjayan Jay et al. (2024-06)
     Impact Response of Textile-Reinforced 3D Printed Concrete Panels
208. Salaimanimagudam M., Jayaprakash Jaganathan (2024-06)
     Optimal Selection of Cable-Reinforcement for Concrete 3D Printed Lattice-Beam
209. Masoud Laith, Hammoud Ahmad, Mortada Youssef, Masad Eyad (2024-06)
     Rheological, Mechanical, and Microscopic Properties of Polypropylene-Fiber-Reinforced Geopolymer Concrete for Additive Manufacturing
210. Wang Changqing, Du Zicheng, Zhang Yu, Ma Zhiming (2024-06)
     Elaborating the 3D Microstructural Characteristics and Strength Softening Mechanical Mechanism of Fiber-Reinforced Recycled Aggregate Concrete
211. Konoplianyk Alexander, Sopilnyak Artem, Sirenok Kyrylo, Sereda Svitlana et al. (2024-06)
     Constituent Components of 3D Printing in Construction:
     Mixture, Reinforcement and Their Main Characteristics
212. Romario Yulius, Bhat Chinmai, Ramezani Maziar, Jiang Cho-Pei (2024-06)
     Marine-Waste-Management of Oyster-Shell-Waste as Reinforcement for Clay Additive Manufacturing Components
213. Li Haodao, Wei Jingjie, Khayat Kamal (2024-06)
     3D Printing of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials:
     From Mixture Design to Printability Evaluation
214. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2024-06)
     Reinvent Reinforced Concrete with Robotics and 3D Printing
215. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay, Mechtcherine Viktor (2024-06)
     In-Process Textile Reinforcement Method for 3D Concrete Printing and Its Structural Performance
216. Lachmayer Lukas, Dittrich Lars, Recker Tobias, Dörrie Robin et al. (2024-06)
     In-Line Image-Based Reinforcement Detection for Concrete Additive Manufacturing Processes Using a Convolutional Neural Network
217. Luo Surong, Li Wenqiang, Wang Dehui (2024-05)
     Study on Bending Performance of 3D Printed PVA-Fiber-Reinforced Cement-Based Material
218. Shoaei Parham, Kjøniksen Anna-Lena, Pamies Ramón, Pilehvar Shima (2024-05)
     Characterization of 3D Printable Geopolymer Mortars:
     Effect of Binder Composition and Basalt-Fiber-Reinforcement
219. Zhou Boyu, Zhang Mo, Ma Guowei (2024-05)
     An Experimental Study on 3D Printed Concrete Reinforced with Fibers Recycled from Wind Turbine Blades
220. Mu Ru, Chen Jiao, Qing Longbang, Fan Chunhao et al. (2024-05)
     Properties of a Steel-Fiber-Reinforced Cementitious Composite Stool with Digitally Distributed Steel-Fibers
221. Bodur Burak, Mecit Işık Muhammet, Benli Ahmet, Bayrak Barış et al. (2024-05)
     Durability of Green Rubberized 3D Printed Lightweight Cement Composites Reinforced with Micro-Attapulgite and Micro-Steel-Fibers:
     Printability and Environmental Perspective
222. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-04)
     A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
223. Yang Yekai, Lu Pengyuan, Liu Zhongxian, Dong Liang et al. (2024-04)
     Effect of Steel-Fiber with Different Orientations on Mechanical Properties of 3D Printed Steel-Fiber-Reinforced Concrete:
     Meso-Scale Finite-Element-Analysis
224. Ahmed Hassan, Giwa Ilerioluwa, Game Daniel, Arce Gabriel et al. (2024-04)
     Automated Reinforcement During Large-Scale Additive Manufacturing:
     Structural-Assessment of a Dual Approach
225. Uddin Md, Ye Junhong, Haque M., Yu Kequan et al. (2024-04)
     A Novel Compressive Strength Estimation Approach for 3D Printed Fiber-Reinforced Concrete:
     Integrating Machine Learning and Gene Expression Programming
226. Cutajar Sacha, Dielemans Gido, Krakovská Ema, Dorresteijn Evelien et al. (2024-04)
     Up-Scaling Earth Formworks:
     3D Printing-Strategies for Material-Optimized Reinforced Concrete Structures
227. Tripathi Avinaya, Nair Sooraj, Chauhan Harshitsinh, Neithalath Narayanan (2024-04)
     Print Geometry Alterations and Layer-Staggering to Enhance Mechanical Properties of Plain and Fiber-Reinforced Three-Dimensional-Printed Concrete
228. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-03)
     A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
229. Pan Jinlong, Ping Pengxin, Ding Boyin, Zhu Binrong et al. (2024-03)
     Impact Behavior of 3D Printed Fiber-Reinforced Cementitious Composite Beams
230. Chen Mingxu, Xu Jiabin, Yuan Lianwang, Zhao Piqi et al. (2024-03)
     Use of Creep and Recovery-Protocol to Assess the Printability of Fiber-Reinforced 3D Printed White-Portland-Cement Composites
231. Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-03)
     Optimization of Fiber-Reinforced Lightweight Rubber-Concrete Mix-Design for 3D Printing
232. Liu Xinhao, Hu Jiajun, Guo Xiaolu (2024-03)
     Printability and Inter-Layer Bonding Property of 3D Printed Fiber-Reinforced Geopolymer
233. Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
     Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete
234. Ivaniuk Egor, Mechtcherine Viktor (2024-03)
     Approach for Production of Textile-Reinforced Beams and Slabs Using Three-Dimensional Concrete Printing
235. Ziada Mahmoud, Tanyildizi Harun, Seloglu Maksut, Coskun Ahmet (2024-02)
     Bacteria-Based Crack-Healing of 3D Printed PVA-Fiber-Reinforced Geopolymer Mortars
236. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay (2024-02)
     Bond-Slip Behavior of Textile-Reinforcement in 3D Printed Concrete
237. Şahin Hatice, Mardani Ali, Beytekin Hatice (2024-02)
     Effect of Silica-Fume Utilization on Structural Build-Up, Mechanical and Dimensional Stability Performance of Fiber-Reinforced 3D Printable Concrete
238. Zeng Jun-Jie, Yan Zitong, Jiang Yuan, Li Pei-Lin (2024-02)
     3D Printing of FRP Grid and Bar Reinforcement for Reinforced Concrete Plates:
     Development and Effectiveness
239. Zhao Guoqi, Fan Yichang, Tang Can, Wei Yuanyuan et al. (2024-02)
     Preparation and Compressive Properties of Cementitious Composites Reinforced by 3D Printed Cellular Structures with a Negative Poisson's Ratio
240. Nguyen Vuong, Tran Jonathan, Liu Junli, Tran Mien et al. (2024-02)
     Extended Finite Element Multi-Scale Modelling for Crack Propagation in 3D Printed Fiber-Reinforced Concrete
241. Delavar Mohammad, Chen H., Sideris Petros (2024-01)
     Analysis and Design of 3D Printed Reinforced Concrete Walls Under In-Plane Quasi-Static Loading
242. Raut Jayant, Pimpalshende Anjusha, Chandak Mayuri, Patil Tejas et al. (2024-01)
     A Novel Multi-Method Framework for 3D Printed Fiber-Reinforced Polymer Concrete Utilizing Advance Additive Manufacturing Techniques
243. Liu Qiong, Cheng Shengbo, Peng Bin, Chen Kailun et al. (2024-01)
     The Buildability and Flexural Properties of 3D Printed Recycled Mortar Reinforced with Synchronized Steel-Cable Under Different Reinforcement Ratios
244. Pham Thi, Trinh Duy, Do Trong, Huang Jie (2023-12)
     Flexural Behavior of Printed Concrete Wide Beams with Dispersed Fibers-Reinforced
245. Li Haodao, Addai-NImoh Alfred, Kreiger Eric, Khayat Kamal (2023-12)
     Methodology to Design Eco-Friendly Fiber-Reinforced Concrete for 3D Printing
246. Alyami Mana, Khan Majid, Javed Muhammad, Ali Mujahid et al. (2023-12)
     Application of Metaheuristic Optimization Algorithms in Predicting the Compressive Strength of 3D Printed Fiber-Reinforced Concrete
247. Li Zihan, Liu Huanbao, Nie Ping, Cheng Xiang et al. (2023-12)
     Mechanical Properties of Concrete Reinforced with High-Performance Micro-Particles for 3D Concrete Printing
248. Wang Li, Wang Fucheng, Li Rong, Wang Qiao (2023-12)
     Interfacial Constitutive Model of 3D Printed Fiber-Reinforced Concrete Composites and Its Experimental Validation
249. Maitenaz Sébastien, Mesnil Romain, Féraille Adélaïde, Caron Jean-François (2023-12)
     Materialising Structural Optimization of Reinforced Concrete Beams Through Digital Fabrication
250. Li Yeou-Fong, Tsai Pei-Jen, Syu Jin-Yuan, Lok Man-Hoi et al. (2023-12)
     Mechanical Properties of 3D Printed Carbon Fiber-Reinforced Cement Mortar
251. Warsi Syed, Panda Biranchi, Biswas Pankaj (2023-12)
     Exploring Fiber Addition Methods and Mechanical Properties of Fiber-Reinforced 3D Printed Concrete:
     A Review
252. Reißig Silvia, Bedolla Carolin, Meyer Tamara, Mechtcherine Viktor (2023-12)
     Rheological Behavior of Fiber-Reinforced LC3 Fine-Grained Concrete in the Context of Additive Manufacturing
253. Straßer Alexander, Kränkel Thomas, Gehlen Christoph (2023-12)
     Integrating Wire Arc Additive Manufacturing into Selective Paste-Intrusion for Reinforced Concrete Elements:
     Effect of Temperature on the Mechanical Performance
254. Kalthoff Matthias, Cruz Cynthia, Raupach Michael, Matschei Thomas (2023-12)
     Material‐Minimized Construction with Extruded Textile-Reinforced Concrete
255. Pazols Maximiliano, Raspall Félix (2023-12)
     Terra Fibrosum:
     Continuous Fibers Reinforcement System for Robotized 3D Printing with Earth for Architecture
256. Alyami Mana, Khan Majid, Fawad Muhammad, Nawahz R. et al. (2023-11)
     Predictive Modeling for Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Machine Learning Algorithms
257. Teng Fei, Li Mingyang, Zhang Dong, Li Heng et al. (2023-11)
     BIM-Enabled Collaborative-Robots 3D Concrete Printing to Construct MiC with Reinforcement
258. Bosbach Sven, Kalthoff Matthias, Cruz Cynthia, Adam Viviane et al. (2023-11)
     Digital Prefabrication of Lightweight Building Elements for Circular Economy:
     Material-Minimised Ribbed Floor Slabs Made of Extruded Carbon Reinforced Concrete (ExCRC)
259. Wang Xianlin, Banthia Nemkumar, Yoo Doo-Yeol (2023-11)
     Reinforcement Bond Performance in 3D Concrete Printing:
     Explainable Ensemble Learning Augmented by Deep Generative Adversarial Networks
260. Ungureanu Dragoș, Onuțu Cătălin, Țăranu Nicolae, Vornicu Nicoleta et al. (2023-11)
     Microstructure and Mechanical Properties of Cost-Efficient 3D Printed Concrete Reinforced with Polypropylene Fibers
261. Friese Danny, Hahn Lars, Le Xuan Hung, Mersch Johannes et al. (2023-10)
     Robot-Assisted Manufacturing Technology for 3D Non-Metallic Reinforcement Structures in the Construction Applications
262. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-10)
     Comparative Studies of LC³- and Fly-Ash-Based Blended Binders in Fiber-Reinforced Printed Concrete:
     Rheological and Quasi-Static Mechanical Characteristics
263. Zhou Yi, Althoey Fadi, Alotaibi Badr, Gamil Yaser et al. (2023-10)
     An Overview of Recent Advancements in Fiber-Reinforced 3D Printing Concrete
264. Yang Wenwei, Wang Li, Hu Yuanyuan, Sanjayan Jay et al. (2023-10)
     An Integrated Topology-Optimization Method Including Manufacturing-Constraints for 3D Printed Fiber-Reinforced Concrete Structures
265. Hass Lauri, Nefs Karsten, Bos Freek, Salet Theo (2023-10)
     Application Potential of Combining Strain-Hardening Cementitious Composites and Helical Reinforcement for 3D Concrete Printed Structures:
     Case Study of a Spiral Staircase
266. Dörrie Robin, David Martin, Freund Niklas, Lowke Dirk et al. (2023-10)
     In-Process Integration of Reinforcement for Construction Elements During Shotcrete 3D Printing
267. Dittel Gözdem, Scheurer Martin, Evers Clara, Meyer-Brötz Fabian et al. (2023-10)
     Structural Performance of Textile Reinforced 3D Printed Concrete Elements
268. Freund Niklas, Dörrie Robin, David Martin, Kloft Harald et al. (2023-10)
     Enclosing Reinforcement Structures in Shotcrete 3D Printing:
     The Effect of Reinforcement Geometry and Accelerator Dosage on the Formation of Voids
269. Rothe Tom, Hühne Christian, Gantner Stefan, Hack Norman (2023-10)
     Dynamic Winding Process of Individualized Fiber-Reinforcement Structures for Additive Manufacturing in Construction
270. Auer Daniel, Bos Freek, Olabi Mohammad, Fischer Oliver (2023-10)
     Fiber-Reinforcement of 3D Printed Concrete by Material-Extrusion-Tool-Paths Aligned to Principal Stress-Trajectories
271. Perez-Rivera Anthony, Kreiger Eric, Stidwell Samuel, Stynoski Peter et al. (2023-10)
     Finite-Element Modeling of Reinforced Additively Constructed Concrete Structures
272. Singh Amardeep, Wang Yufei, Zhou Yiyi, Sun Junbo et al. (2023-10)
     Utilization of Antimony-Tailings in Fiber-Reinforced 3D Printed Concrete:
     A Sustainable Approach for Construction Materials
273. Genc Gokhan, Demircan Ruya, Beyhan Figen, Kaplan Gökhan (2023-10)
     Assessment of the Sustainability and Producibility of Adobe-Constructions Reinforced with Ca-Based Binders:
     Environmental Life-Cycle-Analysis and 3D Printability
274. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2023-10)
     Printability and Shape Fidelity Evaluation of Self-Reinforced Engineered Cementitious Composites
275. Curbach Manfred, Hegger Josef, Bielak Jan, Schmidt Christopher et al. (2023-10)
     New Perspectives on Carbon Reinforced Concrete Structures:
     Why New Composites Need New Design-Strategies
276. Alarrak Rashed, Jeon Byeonguk, Brand Alexander (2023-09)
     Flexural Toughness of Extruded Fiber-Reinforced Mortar with Preferentially Aligned Fibers
277. Straßer Alexander, Riegger Felix, Hamilton Leigh, Kränkel Thomas et al. (2023-09)
     Selective Paste-Intrusion:
     Integration of Reinforcement by WAAM
278. Bong Shin, Nematollahi Behzad, Mechtcherine Viktor, Li Victor et al. (2023-09)
     3D Printed Engineered, Strain-Hardening Geopolymer Composite as Permanent Formwork for Construction of Reinforced Concrete Beam
279. Jauk Julian, Gosch Lukas, Vašatko Hana, Königsberger Markus et al. (2023-09)
     Filament-Reinforced 3D Printing of Clay
280. Dörrie Robin, Freund Niklas, Herrmann Eric, Baghdadi Abtin et al. (2023-09)
     Automated Force-Flow-Oriented Reinforcement Integration for Shotcrete 3D Printing
281. Kulkarni Omkar, Thakur Manideep, Kamakshi Tippabhotla, Paritala Spandana et al. (2023-09)
     Evaluation of Tensile Behavior of 3D Printed Concrete Assemblies with Reinforcement
282. Alarrak Rashed, Jeon Byeonguk, Brand Alexander (2023-08)
     Fracture Properties of Extruded Fiber-Reinforced Mortar with Preferentially Aligned Fibers
283. Zeng Jun-Jie, Li Pei-Lin, Yan Zitong, Zhou Jie-Kai et al. (2023-08)
     Behavior of 3D Printed HPC Plates with FRP-Grid-Reinforcement Under Bending
284. Tarhan Yeşim, Perrot Arnaud (2023-08)
     Reinforcement of 3D Printable Earth-Based Mortar with Natural Textile-Material
285. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi (2023-08)
     Experimental Study of the In-Situ Rebar-Splicing-Technique to Reinforce 3D Printed Concrete in Vertical Directions
286. Surehali Sahil, Tripathi Avinaya, Neithalath Narayanan (2023-08)
     Anisotropy in Additively Manufactured Concrete Specimens Under Compressive Loading:
     Quantification of the Effects of Layer-Height and Fiber-Reinforcement
287. Zhang Yi, Zhu Yanmei, Ren Qiang, He Bei et al. (2023-08)
     Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials
288. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-08)
     Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer for 3D Concrete Printing Application:
     Evaluating Fresh and Hardened Properties
289. Jacquet Yohan, Perrot Arnaud (2023-07)
     Sewing Concrete Device:
     Combining In-Line Rheology-Control and Reinforcement-System for 3D Concrete Printing
290. Mollah Md., Comminal Raphaël, Silva Wilson, Šeta Berin et al. (2023-07)
     Computational Fluid Dynamics Modelling and Experimental Analysis of Reinforcement-Bar-Integration in 3D Concrete Printing
291. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2023-07)
     In-Situ Coating Technique for Rebar Installation for 3D Printed Reinforced Concrete
292. Breseghello Luca, Hajikarimian Hamed, Jørgensen Henrik, Naboni Roberto (2023-07)
     3DLightBeam+:
     Design, Simulation, and Testing of Carbon-Efficient Reinforced 3D Concrete Printed Beams
293. Kalthoff Matthias, Bosbach Sven, Backes Jana, Cruz Cynthia et al. (2023-06)
     Fabrication of Lightweight, Carbon Textile Reinforced Concrete Components with Internally Nested Lattice Structure Using 2-Layer Extrusion by LabMorTex
294. Zohrabyan Vahan, Zöller Raphael, Gradic Simon, Braml Thomas (2023-06)
     Potential of 3D Printed Steel Fiber Reinforced Concrete Components for the Protection of Critical Infrastructure:
     Impact and Free-Fall Tests
295. Yang Hui-Qin, Klug Christina, Schmitz Thomas (2023-06)
     Fiber-Reinforced Clay:
     An Exploratory Study on Automated Thread Insertion for Enhanced Structural Integrity in LDM.
296. Alzarrad Ammar, Song Siyuan, Hatamleh Muhammad, Awolusi Ibukun et al. (2023-06)
     Guideline for Automated Construction of Reinforced Concrete Beams Using 3D Printing and BIM
297. Ungureanu Dragoș, Onuțu Cătălin, Isopescu Dorina, Țăranu Nicolae et al. (2023-06)
     A Novel Approach for 3D Printing Fiber-Reinforced Mortars
298. Zhang Daobo, Feng Peng, Zhou Peizhao, Xu Weiguo et al. (2023-06)
     3D Printed Concrete Walls Reinforced with Flexible FRP Textile:
     Automatic Construction, Digital Rebuilding, and Seismic Performance
299. Zhang Sisi, Kalus Matthias, Engel Sven, Hegger Josef et al. (2023-06)
     Development of an Innovative 3D Printing Process for Reinforced Concrete:
     AMoRC Method
300. Chen Wei, Pan Jinlong, Zhu Binrong, Ma XiaoMeng et al. (2023-06)
     Improving Mechanical Properties of 3D Printable One-Part Geopolymer Concrete with Steel-Fiber-Reinforcement
301. Dittel Gözdem, Dringenberg Steffen, Gries Thomas (2023-06)
     Through Textile to Reinforced 3D Concrete Printing
302. Kruppa Henning, Kalthoff Matthias, Neef Tobias, Reißig Silvia et al. (2023-06)
     Alkali-Activated Binder-Requirements for Extrusion and 3D Printing of Carbon-Reinforced Concrete
303. Neef Tobias, Kalthoff Matthias, Müller Steffen, Backes Jana et al. (2023-06)
     Extrusion of High Yield Strength Carbon-Reinforced Concrete with Mineral Impregnated Rovings
304. Sobek Werner, Schmeer Daniel (2023-05)
     Graded Concrete (2. Generation):
     The Combination of Hollow-Core Construction with Trajectory-Based Reinforcement
305. Uddin Md, Ye Junhong, Deng Boyu, Li Lingzhi et al. (2023-04)
     Interpretable Machine Learning for Predicting the Strength of 3D Printed Fiber-Reinforced Concrete
306. Budiman Franky, Chandra Jimmy, Halim Alvin, Pudjisuryadi Pamuda (2023-04)
     Flexural and Shear Behavior of 3D Printed Reinforced Concrete Beams:
     An Experimental Study
307. Maurya Shubham, Dey Dhrutiman, Panda Biranchi, Dixit Uday (2023-04)
     In-Line Reinforcement of Steel-Cable in 3D Concrete Printing
308. Luo Jiaxiang, Gao Tianyi, Yuan Philip (2023-04)
     Fabrication of Reinforced 3D Concrete Printing Formwork
309. Wang Li, Hu Yuanyuan, Wang Qiao, Cui Tianlong (2023-03)
     Shrinkage and Cracking Performance of PP/PVA Fiber-Reinforced 3D Printed Mortar
310. Chen Yidong, Zhang Wenhua, Zhang Yunsheng, Zhang Yu et al. (2023-03)
     3D Printed Concrete with Coarse Aggregates:
     Built-In-Stirrup Permanent Concrete Formwork for Reinforced Columns
311. Uddin Md, Mahamoudou Faharidine, Deng Boyu, Elobaid Musa Moneef et al. (2023-03)
     Prediction of Rheological Parameters of 3D Printed Polypropylene-Fiber-Reinforced Concrete by Machine Learning
312. Bester Frederick, Kruger Jacques, Zijl Gideon (2023-03)
     Rivet Reinforcement for Concrete Printing
313. Burger Joris, Aejmelaeus-Lindström Johan, Gürel Şeyma, Niketić Filip et al. (2023-02)
     Eggshell Pavilion:
     A Reinforced Concrete Structure Fabricated Using Robotically 3D Printed Formwork
314. Giwa Ilerioluwa, Game Daniel, Ahmed Hassan, Noorvand Hassan et al. (2023-02)
     Performance and Macrostructural Characterization of 3D Printed Steel-Fiber-Reinforced Cementitious Materials
315. Allameh Seyed, Allameh Hadi, Miller Roger, Lenihan Avery et al. (2023-02)
     On the 3D Printing of Reinforced Concrete
316. Pons-Valladares Oriol, Casanovas-Rubio Maria, Armengou Jaume, Fuente Albert (2023-02)
     Approach for Sustainability-Assessment for Footbridge Construction Technologies:
     Application to the First World D-Shape 3D Printed Fiber-Reinforced Mortar Footbridge in Madrid
317. Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki (2023-01)
     Mechanical Properties of Fiber-Reinforced Cementitious Composites Manufactured Using 3D Printing Technology
318. Zijl Gideon, Heever Marchant, Cho Seung (2023-01)
     SHCC Reinforced 3D Printed Concrete
319. Parisi Fabio, Sangiorgio Valentino, Parisi Nicola, Mangini Agostino et al. (2023-01)
     A New Concept for Large Additive Manufacturing in Construction:
     Tower-Crane-Based 3D Printing Controlled by Deep-Reinforcement-Learning
320. Yang Yekai, Wu Chengqing, Liu Zhongxian (2023-01)
     Rate-Dependent Behavior of 3D Printed Ultra-High-Performance Fiber-Reinforced Concrete Under Dynamic Splitting Tensile
321. Gebhard Lukas, Mata-Falcón Jaime, Iqbal Arsalan, Kaufmann Walter (2023-01)
     Structural Behavior of Post-Installed Reinforcement for 3D Concrete Printed Shells:
     A Case Study on Water Tanks
322. Chu Shaohua, Yang En-Hua, Unluer Cise (2023-01)
     Development of Nanofiber-Reinforced Reactive Magnesia-Based Composites for 3D Printing
323. Jiang Fangming, Long Xiong, Tian Likang, Tan Yan et al. (2022-12)
     Tensile Strain-Hardening Cementitious Composites and Its Practical Exploration Without Reinforcement:
     A Review
324. Bischof Patrick, Mata-Falcón Jaime, Ammann Rebecca, Näsbom Andreas et al. (2022-12)
     Digitally Fabricated Weak Interfaces to Reduce Minimum Reinforcement in Concrete Structures
325. Qing Longbang, Sun Honglei, Zhang Yuebo, Mu Ru et al. (2022-12)
     Research Progress on Aligned Fiber-Reinforced Cement-Based Composites
326. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2022-12)
     Assessing Printing Synergism in a Dual 3D Printing System for Ultra-High-Performance Concrete In-Process Reinforced Cementitious Composite
327. Wang Lining, Aslani Farhad (2022-11)
     Structural Performance of Reinforced Concrete Beams with 3D Printed Cement-Based Sensor Embedded and Self-Sensing Cementitious Composites
328. Cao Xiangpeng, Yu Shiheng, Wu Shuoli, Cui Hongzhi (2022-11)
     Experimental Study of Hybrid Manufacture of Printing and Cast-in-Process to Reinforce 3D Printed Concrete
329. Lv Chun, Shen Hongtao, Liu Jie, Wu Dan et al. (2022-11)
     Properties of 3D Printing Fiber-Reinforced Geopolymers Based on Inter-Layer Bonding and Anisotropy
330. Alonso-Cañon Sara, Blanco-Fernandez Elena, Castro-Fresno Daniel, Yoris-Nobile Adrian et al. (2022-11)
     Reinforcements in 3D Printing Concrete Structures
331. Kan Deyuan, Liu Guifeng, Cao Shuang, Chen Zhengfa et al. (2022-11)
     Mechanical Properties and Pore-Structure of Multi-Walled Carbon-Nano-Tube-Reinforced Reactive Powder-Concrete for Three-Dimensional Printing Manufactured by Material-Extrusion
332. Ahadi Bahram, Valiente López María (2022-11)
     Use of Nitinol-Shape Memory Alloy in the Reinforcement of 3D Concrete Printing Industry
333. Liu Miao, Wang Li, Ma Guowei, Li Weiwei et al. (2022-11)
     U-Type Steel-Wire-Mesh for the Flexural Performance Enhancement of 3D Printed Concrete:
     A Novel Reinforcing Approach
334. Salaimanimagudam M., Jayaprakash Jaganathan (2022-11)
     Optimum Selection of Reinforcement, Assembly, and Formwork System for Digital Fabrication Technique in Construction Industry:
     A Critical Review
335. Nguyen Vuong, Liu Junli, Li Shuai, Zhang Guomin et al. (2022-10)
     Modelling of 3D Printed Bio-Inspired Bouligand Cementitious Structures Reinforced with Steel-Fibers
336. Rensburg Johannes, Babafemi Adewumi, Combrinck Riaan (2022-09)
     A Textile Reinforcement Method for 3D Printed Concrete
337. Kalthoff Matthias, Raupach Michael, Matschei Thomas (2022-09)
     Investigation of Rheological Test-Methods for the Suitability of Mortars for Manufacturing of Textile-Reinforced Concrete Using a Laboratory Mortar-Extruder:
     LabMorTex
338. Hansemann Georg, Holzinger Christoph, Schmid Robert, Tapley Joshua et al. (2022-09)
     Lightweight Reinforced Concrete Slab
339. Liu Bing, Liu Xiaoyan, Li Guangtao, Geng Songyuan et al. (2022-09)
     Study on Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete Using Destructive and Non-Destructive Testing Methods
340. Hass Lauri, Bos Freek, Salet Theo (2022-09)
     Characterizing the Bond Properties of Automatically Placed Helical Reinforcement in 3D Printed Concrete
341. Kompella Sriram, Monte Francesco, Bassani Andrea, Guanziroli Stefano et al. (2022-09)
     A Comparative Study of Hardened-State Mechanical Properties of 3D Printed and Conventionally Cast Fiber-Reinforced Concrete
342. Engelhard Michael, Kalytta-Mewesand Andreas, Volkmer Dirk (2022-09)
     Testing Methods for Deformation Characterization on 3D Printed Carbon Fiber-Reinforced Cementitious Composites
343. Ivaniuk Egor, Tošić Zlata, Eichenauer Martin, Müller Steffen et al. (2022-09)
     Automated Production of Textile Reinforced Concrete Modules for the Assembly of Shell Structures
344. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2022-09)
     Robot-Assisted Flow-Production-Processes Tool-Development for the Fabrication of Thin-Walled Fiber-Reinforced Concrete Elements
345. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2022-09)
     Fresh Properties and Strength Evolution of Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer Composite for 3D Concrete Printing Application
346. Marczyk Joanna, Ziejewska Celina, Korniejenko Kinga, Łach Michał et al. (2022-09)
     Properties of 3D Printed Concrete-Geopolymer Hybrids Reinforced with Aramid Roving
347. Ahmed Hassan, Giwa Ilerioluwa, Game Daniel, Hebert Marc et al. (2022-09)
     Studying Steel-Fiber-Reinforcement for 3D Printed Elements and Structures
348. Riegger Felix, Zäh Michael (2022-08)
     Additive Manufacturing of Steel-Reinforcements:
     Integration of WAAM Reinforcements in Particle-Bed 3D Printing with Selective Cement-Paste-Intrusion
349. Anton Ana-Maria, Reiter Lex, Skevaki Eleni, Dillenburger Benjamin (2022-07)
     Reinforcement Lattices for 3DCP:
     A Fabrication Method Based on Ruled Surfaces
350. Gebhard Lukas, Esposito Laura, Menna Costantino, Mata-Falcón Jaime (2022-07)
     Inter-Laboratory Study on the Influence of 3D Concrete Printing Set-Ups on the Bond Behavior of Various Reinforcements
351. Ahmed Ghafur, Askandar Nasih, Jumaa Ghazi (2022-07)
     A Review of Large-Scale 3DCP:
     Material-Characteristics, Mix-Design, Printing-Process, and Reinforcement-Strategies
352. Dörrie Robin, Kloft Harald (2022-06)
     Force-Flow Compliant Robotic Path-Planning Approach for Reinforced Concrete Elements Using SC3DP
353. Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-06)
     Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite
354. Asakawa Tomoya, Nishiwaki Tomoya, Ohno Kazunori, Yokoyama Shigeru et al. (2022-06)
     Fundamental Study on Automated Inter-Layer Reinforcing System with Metal-Fiber-Insertion for 3D Concrete Printer
355. Menna Costantino, Esposito Laura (2022-06)
     Flexural Behavior of Steel-Reinforced Topology-Optimised Beams Fabricated by 3D Concrete Printing
356. Ye Junhong, Weng Yiwei, Du Hongjian, Li Mingyang et al. (2022-06)
     Feasibility of Using Ultra-High-Ductile Concrete to Print Self-Reinforced Hollow Structures
357. Spangenberg Jon, Silva Wilson, Mollah Md., Comminal Raphaël et al. (2022-06)
     Integrating Reinforcement with 3D Concrete Printing:
     Experiments and Numerical Modelling
358. Cho Seung, Heever Marchant, Kruger Jacques, Zijl Gideon (2022-06)
     Proof of Concept:
     Sprayable SHCC Overlay Reinforcement Regime for Unreinforced 3D Printed Concrete Structure
359. Reiter Lex, Anton Ana-Maria, Wangler Timothy, Dillenburger Benjamin et al. (2022-06)
     A 3D Printing Platform for Reinforced Printed-Sprayed Concrete Composites
360. Gantner Stefan, Rennen Philipp, Rothe Tom, Hühne Christian et al. (2022-06)
     Core Winding:
     Force-Flow-Oriented Fiber-Reinforcement in Additive Manufacturing with Concrete
361. Gebhard Lukas, Bischof Patrick, Anton Ana-Maria, Mata-Falcón Jaime et al. (2022-06)
     Pre-Installed Reinforcement for 3D Concrete Printing
362. Hass Lauri, Bos Freek (2022-06)
     Robotically Placed Reinforcement Using the Automated Screwing Device:
     An Application Perspective for 3D Concrete Printing
363. Hojati Maryam, Memari Ali, Zahabi Mehrzad, Wu Zhengyu et al. (2022-06)
     Barbed-Wire Reinforcement for 3D Concrete Printing
364. Xiao Yinan, Hack Norman, Kloft Harald (2022-06)
     Digital Structural Design and Shotcrete 3D Printing-Strategies for Lightweight Reinforced Concrete Beam-Grid Structures
365. Shkundalova Olena, Molkens Tom, Rossi Barbara, Claßen Martin (2022-06)
     Testing 3D Printed Reinforced Concrete Beams
366. Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Kamile, Felekoğlu Burak (2022-05)
     Effect of Fiber-Reinforcement on Extrudability and Buildability of Mineral-Additive-Modified Portland-Cement Mortars:
     A Rheometer-Based Simulation-Analysis
367. Yang Rijiao, Zeng Qiang, Peng Yu, Wang Hailong et al. (2022-05)
     Anomalous Matrix and Inter-Layer Pore-Structure of 3D Printed Fiber-Reinforced Cementitious Composites
368. Ou Ya, Bao Ding, Zhu Guan-Qi, Luo Dan (2022-04)
     Additive Fabrication of Large-Scale Customizable Formwork Using Robotic Fiber-Reinforced Polymer Winding
369. Kazadi Billy, Yao Liang, Wang Li (2022-04)
     In-Process Reinforcement Method for 3D Concrete Printing:
     Status, Potentials and Challenges
370. Zhou Ji, Hou Guanyu, Liu Xiongfei, Li Qi et al. (2022-04)
     Mechanical Properties of Spray-Based 3D Printed Micro-Cable-Reinforced Concrete
371. Li Weihong, Chen Xuhao, Li Nan (2022-04)
     3D Printing of Fast Setting Basalt Fiber-Reinforced Cement-Based Materials
372. Fuente Albert, Blanco Ana, Galeote Eduardo, Cavalaro Sergio (2022-04)
     Structural Fiber-Reinforced Cement-Based Composite Designed for Particle-Bed 3D Printing Systems:
     Case Study Parque De Castilla Footbridge in Madrid
373. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi, Li Zongjin (2022-04)
     3D Printing Devices and Reinforcing Techniques for Extruded Cement-Based Materials:
     A Review
374. Marchment Taylor, Sanjayan Jay (2022-04)
     Lap Joint Reinforcement for 3D Concrete Printing
375. Liu Jie, Lv Chun (2022-03)
     Properties of 3D Printed Polymer Fiber-Reinforced Mortars:
     A Review
376. Adams Thomas, Heuer Christoph, Brell-Cokcan Sigrid (2022-03)
     Dynamic 3D Print-Head for Spatial Strand-Extrusion of Fiber-Reinforced Concrete:
     Requirements, Development and Application
377. Yalçınkaya Çağlar (2022-03)
     Influence of Hydroxypropyl Methylcellulose Dosage on the Mechanical Properties of 3D Printable Mortars with and without Fiber-Reinforcement
378. Mechtcherine Viktor, Taubert Markus, Müller Steffen, Will Frank et al. (2022-03)
     Additive Manufacturing of Monolithic, Steel-Reinforced Concrete Walls Using CONPrint3D-Reinforced Methods
379. Yang Shutong, Lan Tian, Sun Zhongke, Xu Mingqi et al. (2022-03)
     A Predictive Model to Determine Tensile Strength and Fracture-Toughness of 3D Printed Fiber-Reinforced Concrete Loaded in Different Directions
380. Gebhard Lukas, Burger Joris, Mata-Falcón Jaime, Lloret-Fritschi Ena et al. (2022-03)
     Towards Efficient Concrete Structures with Ultra-Thin 3D Printed Formwork:
     Exploring Reinforcement-Strategies and Optimization
381. Yang Yekai, Wu Chengqing, Liu Zhongxian, Li Jun et al. (2022-02)
     Characteristics of 3D Printing Ultra-High-Performance Fiber-Reinforced Concrete Under Impact Loading
382. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi (2022-02)
     Experimental Investigation on Inner- and Inter-Strip Reinforcements for 3D Printed Concrete via Automatic Staple Inserting Technique
383. Zöller Raphael, Ochlast Andreas, Zimmert Florian, Braml Thomas (2022-02)
     Development of Processes for the Automated Planning and Production of Individual Reinforced Concrete Elements
384. Nguyen Ngoc, Bui Tan-Trung, Bui Quoc-Bao (2022-02)
     Fiber-Reinforced Concrete for Slabs without Steel-Rebar-Reinforcement:
     Assessing the Feasibility for 3D Printed Individual Houses
385. Pham Luong, Lu Guoxing, Tran Jonathan (2022-02)
     Influences of Printing-Pattern on Mechanical Performance of Three-Dimensional-Printed Fiber-Reinforced Concrete
386. Kajimoto Jumpei, Koyanagi Jun, Maruyama Yusuke, Kajita Hideyuki et al. (2022-02)
     Automated Interlaminar-Reinforcement with Thickness-Directiona-Fiber-Arrangement for 3D Printing
387. Wu Zhengyu, Memari Ali, Duarte José (2022-01)
     State of the Art Review of Reinforcement-Strategies and Technologies for 3D Printing of Concrete
388. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-12)
     Numerical Modelling-Strategies for Reinforced 3D Concrete Printed Elements
389. Yang Yekai, Wu Chengqing, Liu Zhongxian, Zhang Hai (2021-12)
     3D Printing Ultra-High-Performance Fiber-Reinforced Concrete under Triaxial Confining Loads
390. Sun Xiaoyan, Ye Boxing, Lin Kangjian, Wang Hailong (2021-12)
     Shear-Performance of 3D Printed Concrete Reinforced with Flexible or Rigid Materials Based on Direct-Shear-Test
391. Zhang Ying, Wan Zhiming, Wu Lei (2021-12)
     Study on Mechanical Properties of In-Situ Printed Reinforced Concrete Wall with Core Column
392. Cai Jingming, Sheng Zhaoliang, Wang Xiaoyi, Fang Yizhi et al. (2021-12)
     Effect of Reinforcement-Configurations on the Flexural Behaviors of 3D Printed Fiber-Reinforced Cementitious Composite Beams
393. Nguyen Vuong, Choudhry Niranjan, Panda Biranchi, Nguyen-Xuan Hung et al. (2021-12)
     Performance of Concrete Beam Reinforced with 3D Printed Bio-Inspired Primitive Scaffold Subjected to Three-Point Bending
394. Nair Sooraj, Li Anling, Mobasher Barzin, Neithalath Narayanan (2021-12)
     Effect of Layer-Height on Tensile Stress-Distribution and Crack-Width and Propagation in 3D Printed Fiber-Reinforced Flexural Elements
395. Pierson Matthew, Pinkerton Luke (2021-12)
     Direct Tension Testing of Plain and Fiber-Reinforced Concrete for Use in Additive Construction
396. Rutzen Matthias, Schulz Michael, Moosburger-Will Judith, Lauff Philipp et al. (2021-11)
     3D Printing as an Automated Manufacturing Method for a Carbon-Fiber-Reinforced Cementitious Composite with Outstanding Flexural Strength (105 N/mm²)
397. Sun Xiaoyan, Zhou Jiawei, Wang Qun, Shi Jiangpeng et al. (2021-11)
     PVA-Fiber-Reinforced High-Strength Cementitious Composite for 3D Printing:
     Mechanical Properties and Durability
398. Momeni Mahdi, Relefors Johan, Khatry Abubakar, Pettersson Lars et al. (2021-11)
     Automated Fabrication of Reinforcement Cages Using a Robotized Production Cell
399. Lauff Philipp, Pugacheva Polina, Rutzen Matthias, Weiss Ursula et al. (2021-11)
     Evaluation of the Behavior of Carbon-Short-Fiber-Reinforced Concrete (CSFRC) Based on a Multi-Sensory Experimental Investigation and a Numerical Multi-Scale Approach
400. Giudice Lorenzo, Wróbel Rafał, Katsamakas Antonios, Leinenbach Christian et al. (2021-11)
     Physical Modelling of Reinforced Concrete at a 1:40-Scale Using Additively Manufactured Reinforcement Cages
401. Pham Luong, Panda Biranchi, Tran Jonathan (2021-11)
     Fresh and Hardened Properties of 3D Printable Polymer-Fiber-Reinforced High-Performance Cementitious Composite
402. Block Philippe (2021-11)
     No Reinforcement:
     Compression-Only Structures
403. Ledderose Lukas, Baghdadi Abtin, Kloft Harald (2021-11)
     Magnetic Alignment of Microsteel-Fibers as Strategy for Reinforcing UHPFRC
404. Orlinski Adam, Rycke Klaas, Heimrath Moritz (2021-11)
     Optimizing Reinforcement
405. Dittel Gözdem, Scheurer Martin, Dringenberg Steffen, Jitton Joaquin et al. (2021-11)
     Digital Concrete Production with Vertical Textile Reinforcement
406. Ivaniuk Egor, Müller Steffen, Neef Tobias, Mechtcherine Viktor (2021-11)
     Strategies for Integrating Reinforcement Into 3D Concrete Printing at the TU Dresden
407. Freund Niklas, Lowke Dirk (2021-11)
     Inter-Layer Reinforcement in Shotcrete 3D Printing
408. Neef Tobias, Mechtcherine Viktor (2021-11)
     Simultaneous Integration of Continuous Mineral-Bonded Carbon Reinforcement Into Additive Manufacturing with Concrete
409. Gantner Stefan, Rothe Tom, Hühne Christian, Hack Norman (2021-11)
     Reinforcement-Strategies for Additive Manufacturing in Construction Based on Dynamic Fiber Winding:
     Concepts and Initial Case Studies
410. Park Jihun, Bui The, Lee Jungwoo, Joh Changbin et al. (2021-11)
     Inter-Layer Strength of 3D Printed Mortar Reinforced by Postinstalled Reinforcement
411. Nishiwaki Tomoya, Miyata Yoshihiro, Furue Shoko, Fukatsu Shiko et al. (2021-11)
     Reinforcing Interlayers of Three-Dimensional-Printed Mortar Using Metal-Fiber-Insertion
412. Fischer Gregor, Paegle Ieva (2021-11)
     Reinforcement of Three-Dimensional-Printed Concrete Structures by Weaving and Knitting of Continuous Fibers and Wires
413. Li Zhijian, Ma Guowei, Wang Fang, Wang Li et al. (2021-10)
     Expansive Cementitious Materials to Improve Micro-Cable-Reinforcement Bond in 3D Concrete Printing
414. Xiao Jianzhuang, Chen Zixuan, Ding Tao, Zou Shuai (2021-10)
     Bending Behavior of Steel-Cable-Reinforced 3D Printed Concrete in the Direction Perpendicular to the Interfaces
415. Yang Yekai, Wu Chengqing, Liu Zhongxian, Wang Hailiang et al. (2021-10)
     Mechanical Anisotropy of Ultra-High-Performance Fiber-Reinforced Concrete for 3D Printing
416. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Khayat Kamal et al. (2021-10)
     Digital Fabrication of Eco-Friendly Ultra-High-Performance Fiber-Reinforced Concrete
417. Gebhard Lukas, Mata-Falcón Jaime, Markić Tomislav, Kaufmann Walter (2021-09)
     Aligned Inter-Layer Fiber-Reinforcement for Digital Fabrication with Concrete
418. Stoiber Nadine, Kromoser Benjamin (2021-09)
     Pushing Concrete Material-Usage to the Limit:
     Weight-Optimized, 3D Printed Concrete Girders with External Reinforcement
419. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2021-09)
     Examining Layer-Height Effects on the Flexural and Fracture Response of Plain and Fiber-Reinforced 3D Printed Beams
420. Kompella Sriram, Marcucci Andrea, Monte Francesco, Bassani Andrea et al. (2021-09)
     A Study of Early-Age Shear Properties of 3D Printable Cementitious Mixes with Fiber-Reinforcements
421. Baghdadi Abtin, Dörrie Robin, Kloft Harald (2021-08)
     New Calculation Approach for Selecting and Orienting the Reinforcing Material for Robotic Concrete Manufacturing
422. Xiao Jianzhuang, Zou Shuai, Ding Tao, Duan Zhenhua et al. (2021-08)
     Fiber-Reinforced Mortar with 100% Recycled Fine Aggregates:
     A Cleaner Perspective on 3D Printing
423. Zhang Yifan, Aslani Farhad (2021-08)
     Development of Fiber-Reinforced Engineered Cementitious Composite Using Polyvinyl-Alcohol-Fiber and Activated Carbon-Powder for 3D Concrete Printing
424. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2021-08)
     In-Process Reinforcing Method:
     Dual 3D Printing Procedure for Ultra-High-Performance Concrete Reinforced Cementitious Composites
425. Scheurer Martin, Quenzel Philipp, Nölke Peter, Reuter‐Schniete Jonas et al. (2021-07)
     Investigating the Feasibility of Using Carbon Fiber Tapes as Reinforcement for 3D Concrete Printing
426. Wang Li, Ma Guowei, Liu Tianhao, Buswell Richard et al. (2021-07)
     Inter-Layer Reinforcement of 3D Printed Concrete by the In-Process Deposition of U-Nails
427. Geetha S., Selvakumar M., Lakshmi S. (2021-07)
     3D Concrete Printing Matrix Reinforced with Geogrid
428. Sun Junbo, Aslani Farhad, Lu Jenny, Wang Lining et al. (2021-06)
     Fiber-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing
429. Liu Miao, Huang Yimiao, Wang Fang, Sun Junbo et al. (2021-05)
     Tensile and Flexural Properties of 3D Printed Jackets-Reinforced Mortar
430. Tarhan Yeşim, Craveiro Flávio, Bártolo Helena (2021-05)
     An Effective Solution for Reinforcing 3D Concrete Printable Composites
431. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2021-04)
     Structural Behavior of 3D Printed Concrete Beams with Various Reinforcement-Strategies
432. Marchment Taylor, Sanjayan Jay (2021-04)
     Reinforcement Method for 3D Concrete Printing Using Paste-Coated Bar Penetrations
433. Ding Tao, Xiao Jianzhuang, Zou Shuai, Yu Jiangtao (2021-03)
     Flexural Properties of 3D Printed Fiber-Reinforced Concrete with Recycled Sand
434. Kilic Ugur, Jiang Zhangfan, Ma Ji, Ozbulut Osman (2021-03)
     Printability Characterization of Graphene-Reinforced Cementitious Composites
435. Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
     Integrating Reinforcement in Digital Fabrication with Concrete:
     A Review and Classification Framework
436. Klyuev Sergey, Klyuev Alexander, Shorstova Elena (2021-02)
     Technology of 3D Printing of Fiber-Reinforced Mixtures
437. Liu Miao, Zhang Qiyun, Tan Zhendong, Wang Li et al. (2021-01)
     Investigation of Steel-Wire-Mesh-Reinforcement Method for 3D Concrete Printing
438. Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
     Improving Performance of Additive Manufactured Concrete:
     A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
439. Chen Mingxu, Yang Lei, Zheng Yan, Li Laibo et al. (2021-01)
     Rheological Behaviors and Structure Build-Up of 3D Printed Polypropylene- and Polyvinyl-Alcohol-Fiber-Reinforced Calcium-Sulphoaluminate-Cement Composites
440. Bester Frederick, Heever Marchant, Kruger Jacques, Zijl Gideon (2020-11)
     Reinforcing Digitally Fabricated Concrete:
     A Systems Approach Review
441. Dubov Alexey, Ruben Sam, Korshikov Vasily, Ivanova Anna et al. (2020-11)
     3D Printing of Polymers with Continuous Fibers to Replace Steel-Reinforcement and Structural Steel in Construction
442. Li Leo, Xiao Bofeng, Fang Z., Xiong Z. et al. (2020-11)
     Feasibility of Glass-Basalt Fiber-Reinforced Seawater Coral Sand Mortar for 3D Printing
443. Baz Bilal, Aouad Georges, Khalil Noura, Rémond Sébastien (2020-11)
     Inter-Layer Reinforcement of 3D Printed Concrete Elements
444. Matthäus Carla, Kofler Nadine, Kränkel Thomas, Weger Daniel et al. (2020-10)
     Inter-Layer Reinforcement Combined with Fiber-Reinforcement for Extruded Lightweight Mortar Elements
445. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2020-10)
     Development of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction
446. Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2020-09)
     3D Printed Concrete for Large-Scale Buildings:
     An Overview of Rheology, Printing Parameters, Chemical Admixtures, Reinforcements, and Economic and Environmental Prospects
447. Chu Shaohua, Li Leo, Kwan Albert (2020-09)
     Development of Extrudable High-Strength Fiber-Reinforced Concrete Incorporating Nano-Calcium-Carbonate
448. Marchment Taylor, Sanjayan Jay (2020-09)
     Bond Properties of Reinforcing Bar Penetrations in 3D Concrete Printing
449. Kloft Harald, Empelmann Martin, Hack Norman, Herrmann Eric et al. (2020-09)
     Reinforcement-Strategies for 3D Concrete Printing
450. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2020-08)
     Experimental Investigation of Reinforcement-Strategies for Concrete-Extrusion 3D Printed Beams
451. Claßen Martin, Claßen Johannes, Sharma Rahul (2020-08)
     Conception of a Real World 3D Printing Method for Reinforced Concrete (AMoRC)
452. Ding Tao, Xiao Jianzhuang, Zou Shuai, Zhou Xinji (2020-08)
     Anisotropic Behavior in Bending of 3D Printed Concrete Reinforced with Fibers
453. Li Zhijian, Wang Li, Ma Guowei, Sanjayan Jay et al. (2020-07)
     Strength and Ductility Enhancement of 3D Printing Structure Reinforced by Embedding Continuous Micro-Cables
454. Fioretti Marta, Kompella Sriram, Monte Francesco, Esposito Laura et al. (2020-07)
     Experimental Investigation on the Early-Age Tensile Strength of Fiber-Reinforced Mortar Used in 3D Concrete Printing
455. Hack Norman, Kloft Harald (2020-07)
     Shotcrete 3D Printing Technology for the Fabrication of Slender Fully Reinforced Freeform Concrete Elements with High Surface Quality:
     A Real-Scale Demonstrator
456. Freund Niklas, Mai (née Dressler) Inka, Lowke Dirk (2020-07)
     Studying the Bond Properties of Vertical Integrated Short Reinforcement in the Shotcrete 3D Printing Process
457. Geneidy Omar, Kumarji Sujay, Dubor Alexandre, Sollazzo Aldo (2020-07)
     Simultaneous Reinforcement of Concrete While 3D Printing
458. Marchment Taylor, Sanjayan Jay (2020-07)
     Penetration Reinforcing Method for 3D Concrete Printing
459. Liu Yan, Jewett Jackson, Carstensen Josephine (2020-07)
     Experimental Investigation of Topology-Optimized Deep Reinforced Concrete Beams with Reduced Concrete Volume
460. Scheurer Martin, Dittel Gözdem, Gries Thomas (2020-07)
     Potential for the Integration of Continuous-Fiber-Based Reinforcements in Digital Concrete Production
461. Shakor Pshtiwan, Nejadi Shami, Gowripalan Nadarajah (2020-07)
     Effect of Heat-Curing and E6-Glass Fiber-Reinforcement Addition on Powder-Based 3DP Cement Mortar
462. Weger Daniel, Baier Daniel, Straßer Alexander, Prottung Sophia et al. (2020-07)
     Reinforced Particle-Bed Printing by Combination of the Selective Paste-Intrusion Method with Wire and Arc Additive Manufacturing:
     A First Feasibility Study
463. Bos Freek, Dezaire Steven, Ahmed Zeeshan, Hoekstra Anne et al. (2020-07)
     Bond of Reinforcement-Cable in 3D Printed Concrete
464. Hass Lauri, Bos Freek (2020-07)
     Bending and Pull-Out Tests on a Novel Screw Type Reinforcement for Extrusion-Based 3D Printed Concrete
465. Wang Weiqiang, Konstantinidis Nikolaos, Austin Simon, Buswell Richard et al. (2020-07)
     Flexural Behavior of AR-Glass-Textile-Reinforced 3D Printed Concrete Beams
466. Maitenaz Sébastien, Mesnil Romain, Onfroy Paul, Metge Nicolas et al. (2020-07)
     Sustainable Reinforced Concrete Beams:
     Mechanical Optimization and 3D Printed Formwork
467. Costa Eduardo, Shepherd Paul, Orr John, Ibell Tim et al. (2020-07)
     Automating Concrete Construction:
     Digital Design of Non-Prismatic Reinforced Concrete Beams
468. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
     Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
469. Lee Minu, Mata-Falcón Jaime, Popescu Mariana, Block Philippe et al. (2020-07)
     Potential Approaches for Reinforcing Complex Concrete Structures with Integrated Flexible Formwork
470. Kloft Harald, Empelmann Martin, Hack Norman, Herrmann Eric et al. (2020-07)
     Strategies for the Reinforcement for 3D-Concrete-Printing
471. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schmeier Tobias (2020-06)
     Extrusion-Based Additive Manufacturing with Carbon Reinforced Concrete:
     Concept and Feasibility Study
472. Claßen Martin, Ungermann Jan, Sharma Rahul (2020-05)
     Additive Manufacturing of Reinforced Concrete:
     Development of a 3D Printing Technology for Cementitious Composites with Metallic Reinforcement
473. Assaad Joseph, Yassin Abdallah, Sakka Fatima, Hamzeh Farook (2020-05)
     A Modular Approach for Steel Reinforcing of 3D Printed Concrete:
     Preliminary Study
474. Cohen Zach, Carlson Nicholas (2020-05)
     Piling and Pressing:
     Towards a Method of 3D Printing Reinforced Concrete Columns
475. Pham Luong, Tran Jonathan, Sanjayan Jay (2020-04)
     Steel-Fiber-Reinforced 3D Printed Concrete:
     Influence of Fiber Sizes on Mechanical Performance
476. Perrot Arnaud, Jacquet Yohan, Rangeard Damien, Courteille Eric et al. (2020-03)
     Nailing of Layers:
     A Promising Way to Reinforce Concrete 3D Printing Structures
477. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Cunha Vítor (2020-03)
     Inverse Analysis of Three-Point Bending Tests for 3D Printed Fiber-Reinforced Mortars
478. Park Keunhyoung, Memari Ali, Hojati Maryam, Zahabi Mehrzad et al. (2020-03)
     Experimental Testing and Finite Element Modeling of 3D Printed Reinforced Concrete Beams
479. Li Zhijian, Wang Li, Ma Guowei (2020-01)
     Mechanical Improvement of Continuous Steel-Micro-Cable-Reinforced Geopolymer Composites for 3D Printing Subjected to Different Loading Conditions
480. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
     New Carbon Fiber Reinforcement for Digital, Automated Concrete Construction
481. Kloft Harald, Hack Norman, Mainka Jeldrik, Brohmann Leon et al. (2019-11)
     Additive Manufacturing in Construction:
     First 3D-Printed Reinforced Concrete Components Using Shotcrete 3D Printing (SC3DP) Technology
482. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
     Mineral-Impregnated Carbon-Fiber Composites as Novel Reinforcement for Concrete Construction:
     Material and Automation Perspectives
483. Silva Guido, Quispe L., Kim Suyeon, Nakamatsu Javier et al. (2019-11)
     Development of a Stabilized Natural Fiber-Reinforced Earth Composite for Construction Applications Using 3D Printing
484. Marchment Taylor, Sanjayan Jay (2019-10)
     Mesh Reinforcing Method for 3D Concrete Printing
485. Falliano Devid, Sciarrone Antonino, Domenico Dario, Maugeri Natale et al. (2019-10)
     Fiber-Reinforced Lightweight Foamed Concrete Panels Suitable for 3D Printing Applications
486. Taha Nizar, Walzer Alexander, Ruangjun Jetana, Bürgin Theophil et al. (2019-09)
     Robotic AeroCrete:
     A Novel Robotic Spraying and Surface Treatment Technology for the Production of Slender Reinforced Concrete Elements
487. Bong Shin, Nematollahi Behzad, Xia Ming, Nazari Ali et al. (2019-09)
     Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite for Digital Construction Applications
488. Arunothayan Arun, Nematollahi Behzad, Bong Shin, Ranade Ravi et al. (2019-09)
     Hardened Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction Applications
489. Rutzen Matthias, Volkmer Dirk, Weiss Ursula, Reischmann Lisa et al. (2019-09)
     Micro-Structural Analysis of Crack-Growth Caused by Static and Dynamic Loads in a Carbon-Fiber-Reinforced Cement-Paste
490. Ducoulombier Nicolas (2019-06)
     Characterisation and Modelling of Interfacial-Damage in Fiber-Reinforced Concrete for 3D Printing in Construction
491. Cho Seung, Kruger Jacques, Zeranka Stephan, Rooyen Algurnon et al. (2019-06)
     Mechanical Evaluation of 3D Printable Nano-Silica Incorporated Fiber-Reinforced Lightweight Foam-Concrete
492. Xu Yading, Šavija Branko (2019-06)
     Development of Strain-Hardening Cementitious Composite (SHCC) Reinforced with 3D Printed Polymeric Reinforcement:
     Mechanical Properties
493. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
     A Study into the Effect of Different Nozzles Shapes and Fiber-Reinforcement in 3D Printed Mortar
494. Lauff Philipp, Fischer Oliver (2019-04)
     Efficient Ultra-High Performance Concrete with Innovative Trajectory-Oriented "Reinforcement"
495. Kreiger Eric, Kreiger Megan, Case Michael (2019-04)
     Development of the Construction Processes for Reinforced Additively Constructed Concrete
496. Hambach Manuel, Rutzen Matthias, Volkmer Dirk (2019-02)
     Properties of 3D-Printed Fiber-Reinforced Portland Cement-Paste
497. Nam Young, Hwang Young, Park Ji, Lim Yun (2019-02)
     Fiber-Reinforced Cementitious Composite Design with Controlled Distribution and Orientation of Fibers Using Three-Dimensional Printing Technology
498. Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
     Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing
499. Weng Yiwei, Li Mingyang, Liu Zhixin, Lao Wenxin et al. (2018-12)
     Printability and Fire Performance of a Developed 3D Printable Fiber-Reinforced Cementitious Composites under Elevated Temperatures
500. Chaar Ghassan, Stynoski Peter, Banko Marion (2018-11)
     Structural Behavior of Layer-Printed Reinforced Concrete Beams
501. Bos Freek, Bosco Emanuela, Salet Theo (2018-11)
     Ductility of 3D Printed Concrete Reinforced with Short Straight Steel-Fibers
502. Ma Guowei, Li Zhijian, Wang Li, Bai Gang (2018-10)
     Micro-Cable-Reinforced Geopolymer Composite for Extrusion-Based 3D Printing
503. Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
     Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing
504. Ayres Phil, Silva Wilson, Nicholas Paul, Andersen Thomas et al. (2018-09)
     SCRIM:
     Sparse Concrete Reinforcement in Meshworks
505. Lindemann Hendrik, Gerbers Roman, Ibrahim Serhat, Dietrich Franz et al. (2018-09)
     Development of a Shotcrete 3D Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures
506. Mechtcherine Viktor, Nerella Venkatesh, Ogura Hiroki, Grafe Jasmin et al. (2018-09)
     Alternative Reinforcements for Digital Concrete Construction
507. Stefanoni Matteo, Angst Ueli, Elsener Bernhard (2018-09)
     Corrosion Challenges and Opportunities in Digital Fabrication of Reinforced Concrete
508. Nerella Venkatesh, Ogura Hiroki, Mechtcherine Viktor (2018-07)
     Incorporating Reinforcement into Digital Concrete Construction
509. Asprone Domenico, Menna Costantino, Bos Freek, Salet Theo et al. (2018-06)
     Rethinking Reinforcement for Digital Fabrication with Concrete
510. Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
     3D Printed Steel-Reinforcement for Digital Concrete Construction:
     Manufacture, Mechanical Properties and Bond Behavior
511. Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
     Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement
512. Weng Yiwei, Qian Shunzhi, He Lewei, Li Mingyang et al. (2018-05)
     3D Printable High-Performance Fiber-Reinforced Cementitious Composites For Large-Scale Printing
513. Lim Jian, Weng Yiwei, Li Mingyang (2018-05)
     Effect of Fiber-Reinforced Polymer on Mechanical Performance of 3D Printed Cementitious Material
514. Mechtcherine Viktor, Nerella Venkatesh (2018-04)
     Incorporating Reinforcement in 3D-Printing with Concrete
515. Asprone Domenico, Auricchio Ferdinando, Menna Costantino, Mercuri Valentina (2018-03)
     3D Printing of Reinforced Concrete Elements:
     Technology and Design Approach
516. Soltan Daniel, Li Victor (2018-03)
     A Self-Reinforced Cementitious Composite for Building-Scale 3D Printing
517. Bos Freek, Ahmed Zeeshan, Jutinov Evgeniy, Salet Theo (2017-11)
     Experimental Exploration of Metal-Cable as Reinforcement in 3D Printed Concrete
518. Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
     Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material
519. Bos Freek, Ahmed Zeeshan, Wolfs Robert, Salet Theo (2017-06)
     3D Printing Concrete with Reinforcement
520. Hambach Manuel, Volkmer Dirk (2017-02)
     Properties of 3D Printed Fiber-Reinforced Portland-Cement-Paste
521. Nam Young, Park Ji, Yoon Seung, Lim Yun (2016-06)
     3D Printing of Fibers and Reinforcements for Cementitious Composites to Maximize the Fracture-Resisting Performance of FRCCs
522. Farina Ilenia, Fabbrocino F., Carpentieri G., Modano M. et al. (2015-12)
     On the Reinforcement of Cement Mortars through 3D Printed Polymeric- and Metallic-Fibers
523. Christ Susanne, Schnabel Martin, Vorndran Elke, Groll Jürgen et al. (2014-10)
     Fiber-Reinforcement During 3D Printing
524. Hack Norman, Lauer Willi (2014-04)
     Mesh Mould:
     Robotically Fabricated Spatial Meshes as Reinforced Concrete Formwork
525. Takashima Hiroyuki, Miyagai Kiyotaka, Hashida Toshiyuki, Li Victor (2002-09)
     A Design Approach for the Mechanical Properties of Polypropylene-Discontinuous-Fiber-Reinforced Cementitious Composites by Extrusion-Molding