#structure¶

Keywords by Co - Occurrence¶

#print (411) #concrete (316) #reinforcement (84) #design (73) #base (71)

1. Nan Bo, Qiao Youxin, Leng Junjie, Deng Zhengxing et al. (2026-04)
   Structural Performance of 3D Printed Concrete Reinforced with Bidirectional Steel Wire Mesh
2. Mütevelli Özkan İffet, Aldemir Alper (2026-04)
   Environmental, Structural, and Economic Investigation of 3D-Printed Concrete Buildings with Varying Cross-Sectional Geometries
3. Lyu Qifeng, Luo Zhenhua, Sun Yuting, Du Qianyi et al. (2026-04)
   Improved Energy Storage of Dual-Concrete Composite Cavity-Structure Supercapacitor Fabricated via Mortar-Extrusion 3D Printing
4. Mbabazi Justin, Wang Yalun, Luo Zhenhua, Gao Lanqi et al. (2026-04)
   Structural and Functional Performance of 3D-Printed Light-Transmitting Foamed Concrete with Different Cavity Geometries and Fiber Orientations
5. Sun Hou-Qi, Zhou Jie-Kai, Xia Jun-Run, Zheng Jun-Jie et al. (2026-03)
   Interface Bonding Enhancement for FRP Grid Reinforced 3D-Printed Concrete Structures
6. Jiang Youbau, Li Shuaifeng, Xia Jiahui, Yang Fan et al. (2026-03)
   Experimental Studies on Impact Resistance of 3D Printed Concrete Spherical Structure with Carbon Fiber Reinforced PLA Honeycomb Energy Absorber
7. Wang Qian, Wang Li, Ma Guowei (2026-03)
   Advancing Sustainable Structures Through 3D Printed Concrete:
   Reinforcement Methods and Structural Design Philosophy
8. Punurai Wonsiri, Liu Yiliu (2026-03)
   Integrating Machine Learning with 3D Printing Concrete for Marine Structures:
   Mix Design, Strength Assessment, and Carbon Footprint Prediction
9. Luo Zhenhua, Sun Yuting, Mbabazi Justin, Du Qianyu et al. (2026-03)
   3D-Printed Concrete Structural Supercapacitor with PVA-KOH Enhanced Polymer Mortar Electrolyte
10. Tripathi Avinaya, Patel Devansh, Mobasher Barzin, Neithalath Narayanan (2026-03)
    Modeling of Layered, Multi-Material 3D-Printed Concrete Flexural Members:
    Towards Efficient Structural Design and Optimization
11. Lal Dhirajkumar, Rangari Vinay, Khare Karan (2026-03)
    Structural Optimization and Cost-Efficient Development of an Indigenous Gantry-Type 3D Concrete Printing System for Scalable Construction Applications
12. Zozaya Daiquiri, Shojaeian Hamideh, Uviña-Contreras Francisco, Hojati Maryam (2026-03)
    3D Printing of Earth-Based Mixtures:
    Linking Material Design, Printability, and Structural Performance
13. Luo Jianfen, Wang Qidong, Wang Lijia, Fang Mingyue (2026-03)
    Effects of MXene on the Hydration Process, Pore Structure and Mechanical Performance of 3D-Printed Cementitious Materials
14. Warsi Syed, Panda Biranchi, Biswas Pankaj, Chandra Borsaikia Arun (2026-03)
    Design of Earthquake-Resistant 3D Printed Concrete Walls:
    An Integrated Experimental-Numerical Framework for Predicting Cyclic Performance of Full-Scale Structural Building Based on Wall Testing
15. Jin Yuan, Sun Zhaoyang, Chen Mingxu, Zhou Xiangming et al. (2026-03)
    Predicting the Printability of Cementitious Composites in 3D Printing:
    Relevance Between Rheological Protocols and Structural Deformation
16. Bai Songlin, Yao Xiaofei, Yang Min, Liu Shilong et al. (2026-03)
    Design and Construction of Spatial Curved Structures Based on Concrete Additive Manufacturing:
    A Case Study of an Irregular Gatehouse
17. Wagiri Felicia, Shih Shen, Jauk Julian, Stavric Milena (2026-03)
    Continuous Clay:
    Optimized Toolpaths for 3D-Printed Ceramic Structures Inspired by Weaving Patterns
18. Yousaf Arslan, Koç Muammer (2026-03)
    Bio-Inspired 4D Printing of Earthen Soil Composites for Structural Living Wall Applications
19. Chai Hua, Bernhard Mathias, Zhi Yefan, Ororbia Maximilian et al. (2026-03)
    Design-to-Fabrication Workflow for 3D Concrete Printed Structures with Embedded Periodic Anticlastic Surfaces
20. Rehman Saif, Robens-Radermacher Annika, Unger Jörg, Wolfs Robert (2026-03)
    Assessing Structural Failure in Extrusion-Based 3D Concrete Printing Using a Plasticity Model with Non-Linear Hardening
21. Dhakal Suvechha, Tiwari Nitin (2026-03)
    Printability and Structural Integrity of Fiber-Reinforced Earth-Based Materials for 3D Printing
22. Lunsford Caleb, Spencer Lawson, Shen Dongye, Genedy Moneeb et al. (2026-03)
    Effect of Toolpath Strategies on Anisotropy and Structural Performance of 3D Printed Concrete Gyroid Walls
23. Du Guoqiang, Sun Yan, Deng Xiaowei, Qian Ye (2026-02)
    Bending Performance of Bio-Inspired 3D Printed Porous Lattice SHCC Circular Arch Structures
24. Zhi Yefan, Ororbia Maximilian, Motavaselian Amir, Chai Hua et al. (2026-02)
    Toolpath Optimization for a Post-Tensioned Concrete 3D-Printed Floor Structure
25. Alessandro Antonella, Sousa Israel, Laflamme Simon, Ubertini Filippo (2026-02)
    Effect of Carbon Fillers and Printing Path Strategy on Damage Detection in 3D-Printed Smart Concretes for Structural Health Monitoring
26. Mo Jinxu, Lu Han, Ren Fengming, Lai Mianheng et al. (2026-02)
    Impact of Waste Rubber Powder Size and Replacement Ratio on the Compressive Strength Anisotropy and Pore Structure of 3D Printed Concrete
27. Liu Bei, Wang Hao, Yin Haibin, Li Yufeng (2026-02)
    Design Method and Mechanical Properties of Construction 3D Printing Infill Structures Inspired by Origami Patterns
28. Prakash Pawan, Tripathi Shubham, Zade Nikhil, Shariff Mohammad (2026-02)
    Experimental and Numerical Investigation of Bond and Flexural Behaviour of Additively Manufactured Structural Concrete Beams
29. Neef Tobias, Wen Yue, Friese Danny, Cherif Chokri et al. (2026-02)
    Digital Fabrication Methods for Carbon Reinforced Shell-Like Concrete Structures
30. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2026-02)
    Using 3D Printing for a New Cementitious Composite and Structural Design
31. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhu Chao et al. (2026-02)
    Rheological Rejuvenation and Structural Build-up of 3D Printed Manufactured Sand Concrete via Secondary Mixing Protocol
32. Santhosh S., Raphael Benny, Santhanam Manu (2026-02)
    DELRA:
    A Continuous Print Path Generation Algorithm for Concrete 3D Printing of Lattice Structures
33. Bang Jin, Ha Seong, Hwang Ju, Ahn Jin-Hee et al. (2026-02)
    Hybrid RC Columns with 3D Printed Formworks:
    A Case Study on Process-Informed Structural Integrity
34. Ma Zongfang, Li Borong, Deng Ruixiang, Shang Jingkai et al. (2026-01)
    A Point Cloud-based Multi-scale Fusion Segmentation Model for Surface Pore Structures in 3D Printed Concrete
35. Bihari Ádám, Nemes Rita (2026-01)
    Investigation of Water Vapor Adsorption and Thermal Conductivity Properties of Stabilized Earth Mixtures for the Construction of 3D Printed Wall Structures
36. Uddin Md, Sajib Mahabub, Arif Arifuggaman, Ye Junhong et al. (2026-01)
    From Mix to Structure:
    A Critical Review of 3D Printed Fiber Reinforced Concrete (3DP-FRC)
37. An Dong, Zhu Zhi, Rahman Mahfuzur, Zhang Y. et al. (2026-01)
    Process-Informed Smooth Particle Hydrodynamics-Finite Element (SPH-FE) Simulation of 3D Concrete Printing:
    From Flow Behaviour to Structural Failure
38. Robens-Radermacher Annika, Schmidt Wolfram, Unger Jörg, Mezhov Alexander (2026-01)
    Characterization of Temperature Influence on the Structural Build-Up of 3D Printed Concrete
39. Kang Yuyang, Yu Cheng, Zhang Zedi, Jia Lutao et al. (2026-01)
    The Coupling Effect of Viscosity Modifying Agents and Printing Process on the Air-Void Structure Formation of 3D Printed Air-Entrained Concrete
40. Gencel Osman, Er Yusuf, Güler Onur, Ustaoğlu Abid et al. (2026-01)
    Replacing Natural Aggregates with Phase Change Material-Based 3D Printed Aggregates in Concrete for Structural Function and Dual Thermal Energy Storage
41. Alessandro Antonella, Sousa Israel, Ubertini Filippo (2026-01)
    Sensitive Concretes for 3D Printed Structures:
    First Physical and Electromechanical Characterization
42. Liao Minmao, Sun Xiao, Chen Zhaohui (2026-01)
    Simultaneous Topology and Path Optimization for 3D Concrete Printing Based on Discrete Frame Structures
43. Brandão Filipe, Dias José, Aroso Francisca, Reis Rui et al. (2026-01)
    Upcycling of Waste Fibers:
    Enhancing Structural Integrity in 3DCP Through Fiber Reinforcement
44. Mohammed Salhah, Aljewifi Hana, Jldain Hafeth (2025-12)
    Evaluating Compressive Strength in 3D-Printed Concrete Structures:
    A Comparative Study of ANSYS Simulations and Experimental Data
45. Huang Bo, Liu Chang, Sun Junbo, Wang Yufei et al. (2025-12)
    Optimized Synergy of Fiberglass Mesh and PP Fibers-Modified Structural Adhesive for Enhanced Mechanical and Microstructural Performance in 3D Printing Concrete
46. Nguyen Vuong, Jie Cheah, Zhang Y., Wong Hong (2025-12)
    Effect of Infill Architecture on Structural Performance and Sustainability of 3D-Printed Reinforced Concrete Columns
47. Kalmykov Oleg, Demianenko Ivan, Potapov Sergei, Alataev Dzhmaldii (2025-12)
    Strain Energy Density-Based Topology Optimization Using SIMP and Local Failure Criteria for 3D-Printed Concrete Structures
48. Cimini Jacopo, Meroni Lorenzo, Chiantore Mariachiara, Albicini Paolo et al. (2025-12)
    Addressing Challenges in Marine Algal Restoration:
    Lessons Learned from 3D-Printed Structures on Artificial Reefs
49. Sun Yuhang, Yang Xiaojie, Liu Xiongfei, Ma Guowei et al. (2025-12)
    Coordinated Spray-Based 3D Printing of Reinforced Concrete Structure:
    A Multi-Angle Strategy for Blockage Mitigation
50. Dörrie Robin, Megnet Manuel, David Martin, Dröder Klaus et al. (2025-12)
    Integration of Discrete Reinforcement Elements for Shotcrete 3D Printing of Complex Structures
51. Han Seongho, Ahn Eunjong, Shin Myoungsu, Popovics John et al. (2025-12)
    Methodology for Surface Defect Assessment in 3D Concrete Printing Using Computer-Vision and Ultrasonic Testing Considering Structural Build-Up
52. Wang Hailong, Shi Yiqing, Sun Xiaoyan, Lin Xiqiang et al. (2025-12)
    Design, Multi-Scale Structural Analysis, and Construction of Modular Prefabricated 3D-Printed Concrete Residence
53. Wang Zherui, Teitelbaum E., Akbarzadeh Masoud, Aviv D. (2025-11)
    Experimental Assessment on Thermal Mass Performance of Structurally Optimized, 3D-Printed Concrete Floor Element for Carbon Emission Reduction
54. Geng Renyu, Jiang Jinming, Du Pengcong, Zhang Huiliang et al. (2025-11)
    Multiscale Thermal Optimization of 3D-Printed Walls:
    Integrating Structure, Material, and Process with Fire-Thermal Synergy
55. Soshinskiy Olexander, Rashkevich Nina, Shakhov Stanislav, Melnychenko Andrii (2025-11)
    Formulating a Calculation Methodology for Assessing the Strength Characteristics of Building Structures Constructed with a Construction 3D Printer
56. Najm-Eddine Asmae, Abouelmajd Mohamed, Najm-Eddine Youssef, Erritali Ilham et al. (2025-11)
    Topological Optimization in 3D Concrete Printing Structures:
    A Review
57. Tang Can, Zhou Yujie, Mehmood Awais, Rania Chlihi et al. (2025-11)
    A Novel 3D-Printed Negative Poisson's Ratio Grid-Reinforced Cement-Based Composite Wall Structure:
    Design, Fabrication, and Compressive Properties
58. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-11)
    Multi-Scale Analysis of 3D Printable High-Strength Engineered Cementitious Composite with Carbon and Polyethylene Fibers:
    Rheology, Printability and Hydration Kinetics in Structural Components
59. Fahmy Mohamed, Zainaddin Aqeel, Allo Raafat (2025-11)
    Evaluating the Impact of Different Variables on the Aesthetic Appearance and Structural Integrity of 3D Concrete Printed Panels
60. Li Yeou-Fong, Lin Chih-Chieh, Syu Jin-Yuan, Huang Chih-Hong et al. (2025-10)
    Enhancing 3D-Printed Cement Mortar with Recycled PCB Glass Fibers:
    Printability, Mechanical Strength, and FEM-Based Structural Assessment
61. Darweesh Barrak, Yavariba Jestani Yasaman, Wang Shaoyi, Zhou Todd et al. (2025-10)
    Conformal 3D Printing on Bending-Active Formwork:
    Exploring a New Approach to the Fabrication of Wide-Spanning Structures
62. Melcher Grace, Waggoner Mark (2025-10)
    Building ICONs Catenary Dome:
    A Framework for 3D Printing Shell Structures
63. Kim Chisung, Rider Benjamin, Stewart Lauren, Kurtis Kimberly et al. (2025-10)
    Towards a Design-to-Fabrication Workflow for 3D Concrete Printed Drainage Invert Shell Structures
64. Liu Renlong, Cheng Zhangqi (2025-10)
    Interlayer Fracture Properties of 3D-Printed Cement-Based Structures:
    Influencing Factors and Mechanisms
65. Pfleger Marc-Patrick, Radl Elisabeth, Sam Nina, Vill Markus (2025-10)
    3D Concrete Printing of Thin-Walled Load-Bearing Reinforced Structures
66. Pal Abhipsa, Wan-Wendner Lin (2025-10)
    3D Concrete Printing and Infill Patterns of Energy Efficient Structural Wall Elements
67. Lange David, Shen Chenyue (2025-10)
    Toward Durable 3D Printed Structures
68. Varghese Renny, Rangel Bárbara, Maia Lino (2025-10)
    Strength, Structure, and Sustainability in 3D-Printed Concrete Using Different Types of Fiber Reinforcements
69. Ma Wei, Chen Junjie, Dai Yuntong, Zhou Yaya et al. (2025-10)
    Mechanical Properties of 3D Printed Concrete Irregular Structural Formwork:
    Experimental Study and Finite Element Analysis
70. Wan Qian, Wang Li, Huang Xiaodong, Wu Hao et al. (2025-10)
    Shape Optimization Based on Isogeometric Analysis for 3D Concrete Printing:
    A Design Method for Printing-Friendly Structure
71. Santhanam Manu (2025-10)
    Multi-Scale Assessment of the Structural Performance of 3D Printed Concrete
72. Subramaniam Kolluru, Singh Prashant, Maganty Sohanth, Paritala Spandana (2025-10)
    Form Optimization Applications of 3D Concrete Printing:
    From Bridge to Protective Structures
73. Castro-Chincho Ana, Ivorra-Martinez Juan, Perejón Antonio, Sánchez-Jiménez Pedro et al. (2025-10)
    3D-Printed Mineral Limestone Structures for Calcium Looping Thermochemical Energy Storage:
    Reactivity and Performance Across Cycles
74. Seepim Sirakan, Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk et al. (2025-10)
    Effects of Printing Interval Time on the Structural Performance of 3D-Printed Beams Under Four-Point Bending Loads
75. Ye Htun Thet, Panuwatwanich Kriengsak, Tanapornraweekit Ganchai, Jongvisuttisun Passarin et al. (2025-10)
    Carbon Emission Assessment of 3D Printed Hybrid Modular Concrete Building:
    Work Breakdown Structure
76. Bu Dechao, Zhang Jiawei, Wu Gan, Xia Zixu et al. (2025-09)
    Impact Performance of 3D Printed ECC Inspired by Biological Bouligand Structure
77. Philip Nivin, Jędrzejewska Agnieszka, Mathew Ashitta, Uthuppan Susan (2025-09)
    Steel Fiber Reinforcement for Improved Structural Performance and Durability of 3D Printed Mortar in Marine Environments
78. Liu Renlong, Tang Jiyu, Feng Hu, Cheng Zhangqi (2025-09)
    Study on the Instability of Early Age 3D Printing Cement-Based Structure:
    Considering the Influence of Interface
79. Mahdy Deena, Sameh Hazem, Fekry Mayar (2025-09)
    Structural Stability of 3D-Printed Earthen Catenary Domes:
    Experimental and Analytical Insights
80. Tarhan İsmail, Tarhan Yeşim (2025-09)
    Nonlinear In-Plane Response of 3D-Printed Concrete Walls with Varied Infill Patterns:
    Experimental Mix Design and Numerical Structural Assessment
81. Xing Wenjing, Li Zhengrong (2025-09)
    Quantifying the Heterogeneous Anisotropic Thermal Performance of Extrusion-Based 3D Printed Structures:
    A Multiscale Computational Approach
82. Wang Yufei, Sun Junbo, Wang Xiangyu, Huang Bo et al. (2025-09)
    Environmental and Economic Evaluation of a Prefabricated 3D-Printed Structural Units Using Recycled Aggregates from Construction and Demolition Waste:
    A Case Study in China
83. Leong Wai (2025-09)
    Structural Optimization and Performance Evaluation of Spain's 3D-Printed Concrete Bridges Using AI-Based Design Approaches
84. Vollmert Jasper, Peralta Patricia, Alatassi Adel, Chmelnizkij Alexander et al. (2025-09)
    Towards Structural Health Monitoring of Clay-Printed Structures
85. Sari Mustika, Berawi Mohammed, Taswin William, Saroji Gunawan et al. (2025-09)
    Work Breakdown Structure and Construction Process Framework for a Hybrid 3D-Printed Modular Building
86. Wang Xiaoqi, Liu Xing, Xu Yanling, Cao Jianfu et al. (2025-08)
    A General Adaptive Layer Height Continuous Path Planning Algorithm for Concrete 3D Printing of Complex Porous Structures Based on Multi-Objective Optimization and Reinforcement Learning
87. Ghodke Swapnil, Singh Arshdeep, Singh Bhupinder, Chowdhury Shubhankar (2025-08)
    Additively Manufactured Smart Materials and Structures in Construction and Building Applications
88. Yu Qian, Zhang Yamei, Pan Jinlong (2025-08)
    Multi-Scale Orthotropic Damage Constitutive Model for 3D Printed Concrete Informed by Pore Structure
89. Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng (2025-08)
    Optimization of Building Structures Based on Additive Manufacturing:
    A Review
90. Mercimek Ömer, Şahin Oğuzhan, Çelik Alper, Ozkan Ekinci Mehmet et al. (2025-08)
    Structural Performance of Pre-Fabricated 3D Printed Concrete Walls:
    Effect of Cold Joint, Axial Load and Load Type
91. Disu Oluwatimilehin, Ismail Sikiru, Wood Luke, Chrysanthou Andreas et al. (2025-08)
    Experimental Study on Buildability of 3D-Printed Cement-Based Structures Using Aluminium Sulphate
92. Yao Weijing, Gao Yangyunzhi, Huang Xin, Du Hongjian (2025-08)
    Influence of Printing Speed and Extrusion Speed on the Performance and Pore Structures of 3D Printed Mortar
93. Dietrich Sebastian, Schneider Philip, Richter Christiane, Najian Asl Reza et al. (2025-08)
    Multi-Fidelity Structural Design for 3D Concrete Printing with Selective Paste Intrusion
94. Chovghi Frederic, Richter Christiane, D'Acunto Pierluigi (2025-07)
    Fabrication-Aware Structural Form-Finding for Additive Manufacturing:
    An Equilibrium-Based Approach
95. Zhang Chao, Ren Juanjuan, Zhang Shihao, Guo Yipu et al. (2025-07)
    Advanced Impact Resistance Design Through 3D-Printed Concrete Technology:
    Unleashing the Potential of Additive Manufacturing for Protective Structures
96. Yousaf Arslan, Khan Shoukat, Koç Muammer (2025-07)
    Material, Process, and Design Optimization of Local Earthen Soil Reinforced with Natural Fiber Waste and Nanoclay for 3DP of Functional Structures
97. Ding Shengxuan, Li Jiren, Wang Mingqiang (2025-07)
    Study on Mechanical Properties of Composite Basalt Fiber 3D-Printed Concrete Based on 3D Meso-Structure
98. Saelens Lien, Tittelboom Kim, Wan-Wendner Roman, Caspeele Robby (2025-07)
    Experimental and Numerical Quantification of the Structural Capacity of Hybrid 3D Printed and Cast Concrete Beams After Topology Optimization
99. Kaur Zinnia, Goyal Shweta, Kwatra Naveen, Bera Tarun (2025-07)
    Pore Structure Analysis and Durability Performance of Sustainable 3D Printed Concrete Incorporating Fly Ash and Limestone Calcined Clay Based Binders
100. Šána Vladimír, Litoš Jiří (2025-07)
     Load-Bearing Capacity of the 3D Printed Concrete Structure Based on a Static Assessment and Load Test in Scale 1:1
101. Mahmoodi Obaid, Siad Hocine, Lachemi Mohamed, Şahmaran Mustafa (2025-07)
     Recent Advances in CDW-Based Geopolymers:
     A Review of Mechanical Performance, Structural Application, 3D Printing, Durability and Sustainability
102. Alnemrawi Bara'a, Rousan Rajai, Abdalla Khairedin, Lagaros Nikos (2025-06)
     Evaluating the Structural Performance of 3D Printed FRCC Beams with Anchoring Reinforcement:
     Material, Geometry, and Loading Perspectives
103. Najm Omar, Alhassan Mohammad (2025-06)
     Implementation of Brucite in Alkali-Activated Materials Intended for 3D Printed Structures:
     A Fractional Factorial Design Approach
104. Sagyntay Mukhagali, Storch Florian, Mustafa Azamat, Plaschnick Paul et al. (2025-06)
     Automated Production of 3D Printed Сoncrete Structures with Integrated Reinforcement Mesh Based on Standard Reinforcement Bars
105. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-06)
     Enhancing Interfacial Bonding and Pore Structure Optimization in 3D-Printed High-Strength ECC with Steel-PE Hybrid Fibers
106. Ding Shengxuan, Li Jiren, Liu Yiming (2025-06)
     Study on Mechanical Properties and Environmental Benefits of 3D Printed Lean Magnesium Ore Concrete Filled Columns Based on Three-Dimensional Meso-Structure
107. Jacquet Yohan, Kawashima Shiho, Spangenberg Jon (2025-06)
     Unveiling the Structural Build-up 3D Printable Cement-Based Materials:
     From Small Amplitude Oscillatory Shear (SAOS) To Extensional (SAOE) Rheological Workflows
108. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2025-06)
     Experimental Analysis of the Structural Behavior of Hybrid Concrete 3D Printed-Cast Beam Systems
109. Tao Yaxin, Yuan Yong, Zhang Yi, Wangler Timothy (2025-06)
     Pore Structure Analysis of Printcrete Under Varying Temperature
110. Mahdy Deena, Marais Eugene, Abdelrahim Marwa, Dubor Alexandre et al. (2025-06)
     Life Cycle Assessment of Earth-Based Residential Unit “TOVA”:
     A 3D Printed On-Site Load-Bearing Structure
111. Mahdy Deena, Dara Seni, Abdelrahim Marwa (2025-06)
     Evaluating Structure Stability of Self-Supporting 3D Printed Earth-Based Cantilevers Using Robotic ARM
112. Dai Pengfei, Luo Zhenhua, Wang Yalun, Mbabazi Justin et al. (2025-06)
     Waste Plastic Fiber Reinforced Cementitious Cavity Structures Manufactured by Mortar Extrusion 3D Printing
113. Kumar S., Muthu Nelson, Panda Biranchi (2025-06)
     Numerical Investigation of Structural Behavior of 3D-Printed Concrete Walls:
     Insights from Damage Mechanics and Cohesive Zone Approaches
114. Lin Wenyu, Wang Li, Li Zhijian, Bai Gang et al. (2025-06)
     Multi-Scale Fabrication and Challenges in 3D Printing of Special -Shaped Concrete Structures
115. Chen Meng, Sun Hao, Wang Yuting, Zhang Tong (2025-05)
     Relationship Between Interfacial Pore Structure and Anisotropic Dynamic Splitting Behaviour of 3D Printed Engineered Cementitious Composites
116. Tao Yaxin, Wang Li, Wangler Timothy, Lesage Karel et al. (2025-05)
     A (P)Review:
     Adhesion of Printcrete for Tunnel Structures
117. Pereira Carolina, Vieira Henrique, Gonçalves Nuno, Ascensão Guilherme et al. (2025-05)
     Innovative Waste-Containing 3D-Printed Geopolymer Structures for Enhanced Acoustic Comfort in Built Environments
118. Wang Junsong, Ye Haoran, Sun Yating, Zhang Zixin et al. (2025-05)
     Integration of 3D Printed Fiber Concrete and OpenSeesTO for Enhanced Structural Design
119. Mohamed Osama, Mishra Anamika, Isam Fida (2025-05)
     An Overview of 3D Printed Concrete for Building Structures:
     Material Properties, Sustainability, Future Opportunities, and Challenges
120. Ding Tao, Peng Zechen, Dong Haining (2025-05)
     Mechanical Properties of CFRP Grid Reinforced 3D Printed Concrete Arch Structures
121. Sarıkaya M., Benam Shaghayegh, Yılmaz Taner, Erkmen Bülent et al. (2025-05)
     Seismic Performance Assessment of 3D-Printed Concrete Structures
122. Zhou Zhuang, Shi Xinyu, Zhou Haining, Liang Yuan et al. (2025-05)
     Research on 3DPC Construction Method for Structural High-Performance Component Generation
123. Gantner Stefan, Rennen Philipp, Amiri Fatemeh, Rothe Tom et al. (2025-05)
     Robotic Frame Winding:
     Prefabricated Fiber Structures as Formwork and Reinforcement for Digitally Fabricated Shell-Like Concrete Elements
124. Dörrie Robin, Gantner Stefan, Amiri Fatemeh, Lachmayer Lukas et al. (2025-04)
     From Digital to Real:
     Optimised and Functionally Integrated Shotcrete 3D Printing Elements for Multi-Storey Structures
125. Hasani Alireza, Besharatian Boshra, Dorafshan Sattar (2025-04)
     Additively Constructed Plain Concrete Pipes:
     Structural Performance and Site Implementation
126. Gao Jianhao, Niu Yujun, Wang Chaofeng (2025-04)
     Linear Helical Printing:
     A Novel Approach to 3D Printing Concrete Structures with Enhanced Integrity
127. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
     Synergistic Potential of Topology Optimization and Lattice Structures in Concrete 3D Printed Beams
128. Jia Lutao, Dong Enlai, Xia Kailun, Niu Geng et al. (2025-04)
     Initial Plastic Shrinkage of 3D-Printed Concrete Incorporating Recycled Brick Fine Aggregates:
     Insights from Water Transport and Structural Evolution
129. Liu Qiong, Wang Qiming, Sun Chang, Singh Amardeep et al. (2025-04)
     Compressive Performance and Damage Evolution of Concrete Short Columns with Shell-Filling Structure Confined by Continuous Fiber Reinforced 3D Printed Mortar
130. Zhu Jinggao, Cervera Miguel, Ren Xiaodan (2025-04)
     Peridynamic Anisotropic Behavior Analysis of 3D-Printed Concrete Structures
131. Lin Yuxin, Bayramvand Alireza, Meibodi Mania (2025-04)
     Towards Lightweight Structure:
     Coupling Topology Optimization with Non-Planar 3D Concrete Printing
132. İlcan Hüseyin, Külak Adnan, Şahin Oğuzhan, Aldemir Alper et al. (2025-04)
     Reinforcement and Modular System for 3DCP Geopolymer Structures Using Construction and Demolition Waste
133. Liu Xiongfei, Yang Xiaojie, Sun Yuhang (2025-04)
     Synchronous Construction of Spray-Based 3D Printed Reinforced Concrete Structure:
     Effect of 2.5D Rebar Structure on the Flexural Performance of Slab
134. Jiang Yu, Zhang Qingxin, Tabbaa Abir, Daly Ronan (2025-03)
     The Critical Role of Time-Dependent Rheology for Improved Quality Control of 3D Printed Cementitious Structures
135. Du Guoqiang, Sun Yan, Qian Ye (2025-03)
     In-Plane and Out-of-Plane Compressive Performance of Bio-Inspired 3D Printed Strain-Hardening Cementitious Composite Lattice Structures
136. Yang Kun, Yuan Jingbo, Wang Yibo, Yang Fan et al. (2025-03)
     Optimization of 3D Printing Nozzle Structure and the Influence of Process Parameters on the Forming Performance of Underwater Concrete
137. Mesnil Romain, Rosa Pedro, Demont Léo (2025-03)
     Thickness Optimisation in 3D Printed Concrete Structures
138. Vargas José, Westerlind Helena, Breseghello Luca, Silfwerbrand Johan (2025-03)
     Design of Porous Structures in 3D Concrete Printing Using Procedural Print Patterns
139. Khanverdi Mohsen, Das Sreekanta (2025-03)
     Testing Prisms as a Method for Assessing Compressive Properties of 3D-Printed Structural Members:
     Experimental and Numerical Studies
140. Wang Qiang, Yang Wenwei, Wang Li, Bai Gang et al. (2025-03)
     Reinforcement Design and Structural Performance for the Topology Optimized 3D Printed Concrete Truss Beams
141. Zuo Zibo, Zhang Yamei, Li Jin, Huang Yulin et al. (2025-03)
     Systematic Workflow for Digital Design and On-Site 3D Printing of Large Concrete Structures:
     A Case Study of a Full-Size Two-Story Building
142. Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
     The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
143. Liu Xiongfei, Guo Pei, Wang Haonan, Zhang Yi (2025-03)
     Spray-Based 3D Printed Cementitious Electromagnetic Wave Absorption Materials:
     Optimization with Structures Design
144. Shahzad Qamar, Li Fangyuan (2025-03)
     Influence of Concrete Interfaces on the Damage and Pull-Out Behavior of 3D-Printed Concrete Structures
145. Sharma Shivam, Tahlawi M., Delavar Mohammad, Sideris Petros (2025-03)
     Structural Design Methodology for Low-Rise 3D Printed Concrete (3DPC) Buildings Subjected to Non-Seismic Loading:
     Description, Application and Validation
146. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2025-02)
     Effect of Air-Entraining Agent on Hardened Properties of 3D Printed Concrete with Emphasis on Permeability and Air Void Structure
147. Zhang Bo, Zhang Yi, Ye Yihang, Hao Lulu et al. (2025-02)
     Influence of Contacts in 2D Infill Patterns on Mechanical Properties of 3D Printed Concrete Structures
148. Liu Chao, Liu Huawei, Wu Yiwen, Wu Jian et al. (2025-02)
     Effect of X-Ray CT Characterized Pore Structure on the Freeze-Thaw Resistance of 3D Printed Concrete with Recycled Coarse Aggregate
149. Banijamali Kasra, Dempsey Mary, Chen Jianhua, Kazemian Ali (2025-02)
     Machine Learning Approach to Predict the Early-Age Flexural Strength of Sensor-Embedded 3D-Printed Structures
150. Park Ji-seul, Jeong Seung-Su, Hong Seungkee, Lee Seohyung et al. (2025-02)
     Mechanical Modeling for Prediction of Structural Stability of Cylindrical Structures During 3D Concrete Printing
151. Engel Sven, Hegger Josef, Claßen Martin (2025-02)
     Multimodal Automated Fabrication with Concrete:
     Case-Study and Structural Performance of Ribbed CFRP-Reinforced Concrete Ceiling
152. Zhi Yefan, Chai Hua, Teng Teng, Akbarzadeh Masoud (2025-02)
     Automated Toolpath Design of 3D Concrete Printing Structural Components
153. Alós Shepherd David, Dehn Frank, Kuhn Alexander, Degen Robin et al. (2025-01)
     3D Concrete Printing of Solid Wall Cross-Sections with Truckmounted Concrete Pump:
     A Report on the First Printed Structure in Germany
154. Wu Changzhong, Lu Yuanyuan, Tian Jiaxin, Zhu Xingyu et al. (2025-01)
     Research on 3D Printed Section of Concrete Based on Robot Arm and Structural Design of Sprinkler Head
155. Du Guoqiang, Qian Ye (2025-01)
     Enhancing the Fracture and Flexural Behavior of 3D Printed Strain-Hardening Cementitious Composites with Nature-Inspired Single and Double Bouligand Structures
156. Guan Jingyuan, Wang Li, Wan Qian, Ma Guowei (2025-01)
     Material and Structural Fatigue-Performance of 18m Span Reinforced Arch Structure Manufactured by 3D Printing Concrete as Permanent Formwork
157. Caron Jean-François, Ducoulombier Nicolas, Demont Léo (2025-01)
     Reinforcement of Printed Structures
158. Mesnil Romain, Duballet Romain, Baverel Olivier (2025-01)
     Structural Applications of 3D Printing
159. Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
     Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
     From Material-Design to Structural Bearing-Capacity-Assessment
160. Shazad Qamar, Li Fangyuan (2025-01)
     Interfacial Bond-Effects on Shear-Strength and Damage in 3D Printed Concrete Structures:
     A Combined Experimental and Numerical Study
161. Fernand Muhirwa, Yang Zhenjun (2025-01)
     Structural and Microstructural Behavior of Novel 3DP-UHPFRC Beam with Discrete Steel-Fibers and Steel-FRP Composite Bar
162. Lyu Qifeng, Wang Yalun, Chen Dongjian, Liu Shiyuan et al. (2025-01)
     Energy Storage Properties and Mechanical Strengths of 3D Printed Porous Concrete Structural Supercapacitors Reinforced by Electrodes Made of Carbon-Black-Coated Ni Foam
163. Shahzad Qamar, Li Fangyuan (2025-01)
     Impact of Concrete Interfaces on the Mechanical Performance of 3D Printed Concrete Structures
164. Lolli Francesca, Mehlomakulu Bungane, Monkman Sean (2025-01)
     Case Study of 3D Printed Concrete as Compared to Conventional Construction:
     Structural Comparison and Life Cycle Carbon Assessment
165. Nan Bo, Qiao Youxin, Leng Junjie, Bai Yikui (2025-01)
     Advancing Structural Reinforcement in 3D Printed Concrete:
     Current Methods, Challenges, and Innovations
166. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2024-12)
     From Local Earth to Modern Structures:
     A Critical Review of 3D Printed Cement Composites for Sustainable and Efficient Construction
167. Li Shuai, Khieu Hai, Black Jay, Nguyen Hung-Xuan et al. (2024-12)
     Two-Scale 3D Printed Steel-Fiber-Reinforcements-Strategy for Concrete Structures
168. Mohammed Arafat, Tamimi Adil, Abdwais Ahmed (2024-12)
     Structural Performance of 3D Concrete Printed Load-Bearing Walls
169. Liu Huawei, Wang Yifei, Zhu Chao, Wu Yiwen et al. (2024-11)
     Design of 3D Printed Concrete Masonry for Wall Structures:
     Mechanical Behavior and Strength Calculation Methods Under Various Loads
170. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
     Structural Analysis of 3D Printed Concrete Walls Under Quasi-Static Cyclic Loading Using Composite Micro-Model
171. Costalonga Vanessa, Dahy Hanaa (2024-11)
     From Filament to Structure:
     3D Printing of Natural Fiber Filaments for Architecture
172. Ji Yianliang, Pott Ursula, Mezhov Alexander, Rößler Christiane et al. (2024-11)
     Modelling and Experimental Study on Static Yield-Stress-Evolution and Structural Build-Up of Cement-Paste in Early-Stage of Cement Hydration
173. Jørgensen Henrik, Hansen Steen, Jespersen Esra, Florenzano Daniele et al. (2024-11)
     Experimental Investigation of Key Structural Parameters for Structural Design of 3D Printed Concrete
174. Kleibel-McGee Kilian, Gosch Lukas, Jauk Julian, Ristoski Kristijan et al. (2024-11)
     Integration of Weaving- and Sewing-Motions into the 3D Printing of Clay for Lightweight Ceramic-Structures
175. Lori Ali, Mehrali Mehdi (2024-11)
     Mechanical Properties and Crack-Deflection Mechanisms in 3D Printed Porous Geopolymers with Cellular Structures
176. Sabra Tarek, Ohno Motohiro, Kurihara Ryota, Kinomura Koji et al. (2024-11)
     Analytical Investigation on the Structural Performance of RC Column with 3D Printed Concrete Permanent Formwork
177. Kruger Jacques, Zijl Gideon (2024-11)
     A Structural Engineering Perspective on Extrusion-Based 3D Concrete Printing:
     From Green to Solid State
178. Flor Juncal Luis, Loporcaro Giuseppe, Scott Allan, Clucas Don (2024-11)
     The Contribution of 3D Printed Lost Formworks to the Compressive Capacity of Structural Columns
179. Motamedi Mahan, Mesnil Romain, Tang Anh-Minh, Pereira Jean-Michel et al. (2024-11)
     Structural Build-Up of 3D Printed Earth by Drying
180. Csótár Hanna, Baranyai Gusztáv, Szalai Szabolcs, Fischer Szabolcs (2024-11)
     Sustainable Uses of 3D Printing Applied to Concrete Structures
181. Khan Muhammad, Varadharajan Tharanesh, Keller Zachary, Meibodi Mania (2024-11)
     BioMatters:
     The Robotic 3D-Printed Biodegradable Wood-Based Formwork for Cast-in-Place Concrete Structures
182. Motalebi Arash, Khondoker Mohammad, Kabir Golam (2024-10)
     Sustainable Structures Unveiled:
     Navigating the Environmental Landscape of 3D Printing in Construction
183. Li Zhengrong, Xing Wenjing, Wang Heyu, Sun Jingting (2024-10)
     The Effect of Heterogeneous Geometry on Steady-State Heat Transfer in Extrusion-Based 3D Printed Structures
184. Lin Yini, Yan Jiachuan, Sun Ming, Han Xiaoyu et al. (2024-10)
     Inter-Layer Cohesion in 3D Printed Concrete:
     The Role of Width-to-Height-Ratio in Modulating Transport Properties and Pore-Structure
185. Du Guoqiang, Qian Ye (2024-10)
     Bio-Inspired Innovations in 3D Concrete Printing:
     Structures, Materials and Applications
186. Tang Hong, Xiong Shiqi (2024-09)
     Comparative Analysis of Carbon-Emission Accounting and Carbon-Reduction-Effect of 3D Printed Concrete Structures at the Stage of Architecturalization
187. Ivaniuk Egor, Tošić Zlata, Lordick Daniel, Mechtcherine Viktor (2024-09)
     Flow Production of Variable Curved Modules for Thin-Walled Concrete Shell Structures
188. Shakur Emad, Shaked Adaya, Amir Oded (2024-09)
     Topology and Shape-Optimization of 3D Pre-Stressed Concrete Structures
189. Liu Xuelin, Sheng Haitao, Feng Binqing, Zhao Piqi et al. (2024-09)
     Effect of Potassium and Sodium-Based Electrolyzed Water on the Rheological Properties and Structural Build-Up of 3D Printed Cement Composites
190. Licen Jurij, Chen Taole (2024-09)
     Use of Genetic Optimization-Algorithms in the Design of 3D Concrete Printed Shell-Structures
191. Meyuhas Ohad, Larianovsky Pavel, Natanian Jonathan, Sprecher Aaron (2024-09)
     Thermal and Structural Performance of Cork-Cement Composite for Additive Manufacturing
192. Rider Benjamin, Kurtis K., Stewart L. (2024-09)
     Quantification of Porosity and Sorptivity in Fiber-Reinforced 3D Printed Mortar:
     Connecting Material-Composition and Structural Performance
193. Mahdy Deena, Abdelrahim Marwa, Alatassi Adel (2024-09)
     Assessment of Air-Flow Performance Through Openings in 3D Printed Earthen Structure Using CFD Analysis
194. Marchment Taylor (2024-09)
     Concrete 3D Printed Marine Wind, Solar and Energy Storage Support Structures
195. Engel Sven, Hegger Josef, Claßen Martin (2024-09)
     Automated Manufacturing Process and Structural Performance of Ribbed CRC Slabs
196. Kromoser Benjamin, Gappmeier Peter, Ahmed Iyad, Reichenbach Sara (2024-09)
     A New Approach for Automated Design and Robot-Assisted Production of Structurally Optimised Reusable Concrete Building Elements
197. Adams Thomas, Wu Chu, Müller Steffen, Mechtcherine Viktor et al. (2024-09)
     As-Built Monitoring of Concrete Structures
198. Dey Dhrutiman, Panda Biranchi (2024-09)
     Numerical Evaluation of Thermal Performance and Improvement-Strategies for 3D Printed Concrete Structures
199. Wolf Christoph, Robens-Radermacher Annika, Unger Jörg (2024-09)
     Optimization Framework for Large-Scale Powder-Bed 3D Printed Concrete Structures Under Various Constraints
200. Colyn Markus, Babafemi Adewumi, Zijl Gideon (2024-09)
     Advancements in Sustainability of 3D Concrete Printing:
     Presenting Low-Carbon Mixtures for Additively Manufactured Concrete Structures in Practice
201. Sovetova Meruyert, Calautit John (2024-09)
     Effect of the Printing Process on Thermal Performance of 3D Printed Structures
202. Meibodi Mania, Lin Yuxin, Chen Hao (2024-09)
     Hybrid Approaches Towards 3D Concrete Printing for Lightweight Reinforced Concrete Structures
203. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2024-09)
     Material-Volume Reduction with Additive Manufacturing:
     Challenges for Structural Application
204. Szögi Tamás, Kapitány Kristóf, Sólyom Sándor (2024-09)
     Characterization of 3D Concrete Printed Horizontal Structures Through Early-Age Deformation-Analysis
205. Hüsken Götz, Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph (2024-09)
     An Assessment of the Repeatability of 3D Printed Concrete Structures
206. Kreiger Eric, Kreiger Megan, MacAllister Bruce, Wood Tanner et al. (2024-09)
     The Use of Additive Construction in All Structural Components of a Building
207. Rehman Atta, Kim Ik-Gyeom, Kim Jung-Hoon (2024-09)
     Exploring the Impact of the Pumping Process on the Structural Build-Up in the Context of 3D Concrete Printing
208. Daadouch Koussay, Reinold Janis, Meschke Günther (2024-09)
     Numerical Simulation of 3D Concrete Printing:
     From the Layer- to the Structural-Scale
209. Thiel Charlotte, Hechtl Christian, Gehlen Christoph, Kränkel Thomas (2024-09)
     Sustainability Potential of Additive Manufactured Concrete Structures:
     Studies on the Life Cycle Assessment and Circularity of an Extruded Exterior Wall
210. Soto Alejandro, Gebhard Lukas, Anton Ana-Maria, Dillenburger Benjamin et al. (2024-09)
     Structural Testing Campaign for a 30 m Tall 3D Printed Concrete Tower
211. Mezhov Alexander, Robens-Radermacher Annika, Unger Jörg, Schmidt Wolfram (2024-09)
     Effect of the Ambient Temperature on the Structural Build-Up of 3D Printed Concrete:
     Experimental and Modelling Study
212. Mesnil Romain, Sarkis Rosa Pedro, Caron Jean-François (2024-09)
     Thickness-Optimization of 3D Printed Structures Considering Structural Failure
213. Wolfs Robert, Gümrük Idil, Driessen Saar, Ferguson Matthew et al. (2024-09)
     3D Concrete Printing and Circularity:
     Designing, Testing, and Modelling Dry Joints for Structural Applications
214. Jacquet Yohan, Perrot Arnaud (2024-09)
     Hygroscopic Insulation of Open Matrix Core Wall System as a Strategy to Enhance Buildability of 3D Printed Earth-Based Materials Structures
215. Bono Victor, Demont Léo, Ducoulombier Nicolas, Mesnil Romain et al. (2024-09)
     Large-Scale 3D Printing of a Shell Structure Reinforced by the Flow-Based Pultrusion Process
216. Rehman Atta, Kang Manmin, Basha Shaik, Choi Kichang et al. (2024-09)
     Knife-Cut-Test of Concrete:
     The Introduction of a New Test-Method for Measurement of the Structural Build-Up of 3D Concrete Printing-Materials
217. Zimmermann Stefan, Griego Danielle, Flatt Robert (2024-09)
     Visualizing Defects of Concrete 3D Printed Structures with Augmented Reality Based on Machine Learning-Driven Image-Analysis
218. Baz Bilal, Nana W., Mothe Loïc, Florentin Jérôme et al. (2024-09)
     Structural Behavior of 3D Printed Load Bearing Elements
219. Wüchner Roland, Warnakulasuriya Suneth, Asl Reza, Bletzinger Kai-Uwe et al. (2024-09)
     Free-Form Structural Optimization for Additive Manufacturing in Construction
220. Kariouh Anass, Popescu Mariana (2024-09)
     Reusable Flexible Formworks for Constructing Complex Concrete Structures
221. Hack Norman, Kloft Harald, Mai (née Dressler) Inka, D'Acunto Pierluigi et al. (2024-09)
     Injection 3D Concrete Printing:
     From Structural Geometry to Fabrication
222. Ma Liangzhu, Yin Deshun, Ren Jiangtao, Tian Mingyuan et al. (2024-09)
     An Effective Thixotropic Structural-Dynamics Rheological-Model for 3D Printed Concrete Materials in the Flow-State
223. Tomečka Petr, Nováček Jan, Stráský Jiří (2024-08)
     New Structures from Printed UHPC
224. Parida Lukesh, Moharana Sumedha (2024-08)
     Structural Health Monitoring for 3D Printed Civil Infrastructures:
     A Review of Challenges, Applications and Future Directions
225. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
     On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
226. Chovghi Frederic, Richter David, Dörfler Kathrin, D'Acunto Pierluigi (2024-08)
     Reconsidering the Historical Cap Ceiling:
     Layerwise Form-Finding of Self-Supporting Vaulted Structures for In-Situ 3D Printing
227. Bono Victor, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2024-08)
     Design, Structural Optimization and Fabrication of Concrete Shell Through Fiber-Reinforced 3D Printing
228. Kovaleva Daria, Tomovic Ivan, Gericke Oliver, Blandini Lucio (2024-08)
     Structural Design and Analysis of Marinaressa-Coral-Tree
229. Georgiou Christos, Kontovourkis Odysseas (2024-08)
     Robotic 3D Printing on Inclined Surfaces Using Adaptive Formwork Principles for Prefabricated Curve-Like Structures
230. Rennen Philipp, Gantner Stefan, Rothe Tom, Baz Bilal et al. (2024-08)
     Structural Evaluation of Shotcrete 3D Printing and Robotic Fiber Winding for Thin-Shell Elements
231. Gebhard Lukas, Mata-Falcón Jaime, Ammann Rebecca, Pressmair Nadine et al. (2024-08)
     Enhancing Structural Efficiency with Digital Concrete:
     Principles, Opportunities and Case Studies
232. Shahzad Qamar, Li Fangyuan (2024-08)
     Assessment of Load-Bearing Capacity and Buildability Failures in 3D Printed Concrete Structures
233. Zhi Yefan, Teng Teng, Akbarzadeh Masoud (2024-08)
     Designing 3D Printed Concrete Structures with Scaled Fabrication Models
234. Banijamali Kasra, Vosoughi Payam, Arce Gabriel, Noorvand Hassan et al. (2024-08)
     Automated Strength Monitoring of 3D Printed Structures via Embedded Sensors
235. Huang Shuyi, Xu Weiguo, Anton Ana-Maria, Dillenburger Benjamin (2024-08)
     Self-Supporting Lamellae:
     Shape Variation Methods for the 3D Concrete Printing of Large Overhang Structures
236. Klik Przemysław, Cisowski Adam, Rządkowski Witold, Pyrzanowski Paweł et al. (2024-08)
     Investigation of Mechanical Properties of Structures Created with Use of Automatically Reinforced 3D Concrete Printing:
     Preliminary Study
237. Prem Prabhat, Ambily Parukutty, Kumar Shankar, Giridhar Greeshma et al. (2024-07)
     Structural Build-Up-Model for Three-Dimensional Concrete Printing Based on Kinetics-Theory
238. Baghi Ali, Aminpour Nima, Memari Ali, Bilén Sven et al. (2024-07)
     3D Concrete Printing of Self-Supported Filaments via Entrained Cables:
     Constructing Formwork-Free Spanning Structures
239. Kladovasilakis Nikolaos, Pemas Sotirios, Pechlivani Eleftheria (2024-07)
     Computer-Aided Design of 3D Printed Clay-Based Composite Mortars Reinforced with Bio-Inspired Lattice Structures
240. Wu Yiwen, Liu Chao, Liu Huawei, Bai Guoliang et al. (2024-07)
     Mechanism of the Influence of Multi-Scale Pore-Structure on the Triaxial Mechanical Properties of 3D Printed Concrete with Recycled Sand
241. Kloft Harald, Salamatian Ali, Gosslar Joschua, Dorresteijn Evelien et al. (2024-07)
     Robotic Rammed Earth-Concrete (RREC):
     A Novel Additive Manufacturing Technology to Strengthen Rammed Earth Structures by Integrated Rammed Concrete Parts
242. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay (2024-07)
     Application of Textile Reinforcement for 3D Concrete Printed Structures
243. Gonzales Betty, Zavaleta Diana, Bertolotti Bruno, Aguilar Rafael et al. (2024-07)
     Comprehensive Investigation into the Influence of Soil Composition and Water Content on Cracking Due to Drying Shrinkage in 3D Printed Earthen Structures
244. Rehman Atta, Basha Shaik, Choi Kichang, Kang Manmin et al. (2024-07)
     An Analysis of Penetrometer-Test Methods for Structural Build-Up in Stiff and Accelerated 3D Concrete Printing Mixtures
245. Babovic Neira, Laghi Vittoria, Kloft Harald (2024-07)
     Branching Structure for Reinforcement Anchorage Produced with Wire and Arc Additive Manufacturing Technique
246. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2024-07)
     Granular Materials for 3D Printing of Construction Components and Structures
247. Liew Kim, Li Gen, Yin Binbin, Sun Jinhua et al. (2024-07)
     Structural Deterioration and Mechanical Degradation of Limestone-Calcined-Clay-Cement Under Elevated Temperature
248. Chen Zhaohui, Wang Zhenyue, Liao Minmao, Sun Junbo et al. (2024-07)
     Influence of Printing-Pattern on Bearing-Capacity of 3D Printed Concrete Hollow Structures
249. Paquet Elodie, Furet Benoît, Perrot Arnaud (2024-07)
     3D Printed Raw Earth Structures to Create in Cities Vegetated Oasis of Coolness
250. Kinomura Koji, Zhang Wenbo, Kawamura Keisuke (2024-07)
     Structural Performance of a Large Column with an Outer Shell Formed by Short-Fiber-Reinforced Mortar-Extrusion
251. Hanifa Mohamad, Daruari Harish, Figueiredo Bruno, Mendonça Paulo (2024-07)
     Embodied Carbon of Structural Earthen Composites with Natural Materials and Byproducts Suitable for Robotic 3D Printing
252. Sovetova Meruyert, Calautit John (2024-07)
     Influence of Printing Parameters on the Thermal Properties of 3D Printed Construction Structures
253. Antorveza Paez Karen, Ling Andrea, Mahamaliyev Nijat, Bauer Georg et al. (2024-07)
     Digital Fabrication of Biologically Cemented Spatial Structures
254. Aslani Farhad, Zhang Yifan (2024-06)
     Sustainable 3D Printed Concrete Structures Using High-Quality Secondary Raw Materials
255. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2024-06)
     Design for Early-Age Structural Performance of 3D Printed Concrete Structures:
     A Parametric Numerical Modeling Approach
256. Hasani Alireza, Dorafshan Sattar (2024-06)
     Transforming Construction?:
     Evaluation of the State of Structural 3D Concrete Printing in Research and Practice
257. Sadakorn Wannapol, Prasertsuk Santirak, Prasittisopin Lapyote (2024-06)
     Improving the Structural Efficiency of Textured Three-Dimensional Concrete Printing Wall by Architectural Design
258. Ostovari Shadi, Shayani Hooman (2024-06)
     Simulation and Analysis of Automated Generalised Interleaved Layered Execution (AGILE) Process for Concrete Shell-Structures
259. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay, Mechtcherine Viktor (2024-06)
     In-Process Textile Reinforcement Method for 3D Concrete Printing and Its Structural Performance
260. Birru Bizu, Rehman Atta, Kim Jung-Hoon (2024-06)
     Comparative Analysis of Structural Build-Up in One-Component Stiff and Two-Component Shotcrete-Accelerated Set-on-Demand Mixtures for 3D Concrete Printing
261. Yousaf Arslan, Rashid Ans, Koç Muammer (2024-05)
     Parameter-Tuning for Sustainable 3D Printing of Clay Structures
262. Sarker Mohiuddin, Rahmadan Md, Abedin Mohammad (2024-05)
     Engineered Cementitious Composites:
     Design, Structural and 3D Printing Applications
263. An Dong, Zhang Yixia, Yang Chunhui (2024-05)
     Incorporating Coarse Aggregates into 3D Concrete Printing from Mixture Design and Process-Control to Structural Behavior and Practical Applications:
     A Review
264. Vargas José, Sjölander Andreas, Westerlind Helena, Silfwerbrand Johan (2024-05)
     Internal Topology-Optimization of 3D Printed Concrete Structures:
     A Method for Enhanced Performance and Material-Efficiency
265. Patel Abhishek, Raphael Benny (2024-04)
     Robotic 3D Printing of Structural Slabs Using Polyethylene Waste as Filler to Reduce Carbon Footprint
266. Kim Il (2024-04)
     3D Concrete Printing Frame Structure in Granular Medium
267. Lu Bing, Wang Lining, Wang Xiangyu, Tan Ming et al. (2024-04)
     Development of Robotic Sprayable Self-Sensing Cementitious Material for Smart Structural Health Monitoring
268. Hitzegrad Jan, Brohmann Leon, Herding Friedrich, Pfennings Kai et al. (2024-04)
     Surfaces of Coastal Biogenic Structures:
     Exploiting Advanced Digital Design and Fabrication-Strategies for the Manufacturing of Oyste-Reef- and Mussel-Bed-Surrogates
269. Ahmed Hassan, Giwa Ilerioluwa, Game Daniel, Arce Gabriel et al. (2024-04)
     Automated Reinforcement During Large-Scale Additive Manufacturing:
     Structural-Assessment of a Dual Approach
270. Cutajar Sacha, Dielemans Gido, Krakovská Ema, Dorresteijn Evelien et al. (2024-04)
     Up-Scaling Earth Formworks:
     3D Printing-Strategies for Material-Optimized Reinforced Concrete Structures
271. Dell’Endice Alessandro, Bodea Serban, Mele Tom, Block Philippe et al. (2024-04)
     Striatus 2.0 Phoenix:
     Improving Circularity of 3D Concrete Printed Unreinforced Masonry Structures
272. Chadha Kunaljit, Vasey Lauren, Kango Ananya, Aejmelaeus-Lindström Johan et al. (2024-04)
     Impact Printed Structures:
     Design Systems and Construction Strategies
273. Corneliusen Julie, Horswill Duncan (2024-04)
     Reshaping Fabrication:
     A Case Study in Designing Carbon-Reduced Concrete Structures
274. Ding Yahong, Zhang Yaqi, Zhao Yu, Zhang Meixiang et al. (2024-04)
     Impact of Pre-Soaked Lime-Water-Carbonized Recycled Fine Aggregate on Mechanical Properties and Pore-Structure of 3D Printed Mortar
275. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo, Castano-Alvarez Ruben (2024-03)
     Effects of 3D Printing on the Tensile Splitting Strength of Concrete Structures
276. Jay Bhumika, Basavanagowda G., Kumari Archana, Chauhan Aishwarya et al. (2024-03)
     Application of Internet of Things (IoT) in Seismic Performance Evaluation of 3D Printed Structure
277. Banijamali Kasra, Vosoughi Payam, Arce Gabriel, Noorvand Hassan et al. (2024-03)
     Early-Age Strength Monitoring of Sensor-Embedded 3D Printed Structures
278. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2024-03)
     Durability and Pore-Structure of Metakaolin-Based 3D Printed Geopolymer Concrete
279. Gappmeier Peter, Reichenbach Sara, Kromoser Benjamin (2024-03)
     Advances in Formwork Automation, Structure and Materials in Concrete Construction
280. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen et al. (2024-03)
     Thermal Network Model for Anisotropic Heat Transfer in 3D Printed Complex Geometry Structures
281. Du Guoqiang, Sun Yan, Qian Ye (2024-03)
     Flexural Performance of Nature-Inspired 3D Printed Strain-Hardening Cementitious Composites with Bouligand Structures
282. Chen Meng, Fang Shuai, Wang Guangquan, Xuan Yiwei et al. (2024-03)
     Compressive and Flexural Behavior of Engineered Cementitious Composites-Based Auxetic Structures:
     An Experimental and Numerical Study
283. Tiwari Adarsh, Pratapa Phanisri, Santhanam Manu (2024-03)
     Lattice Concrete:
     3D Printed Periodic Cellular Structures Through Selective Cement-Hydration
284. Nan Cristina, Vigorito Alessio (2024-02)
     Exploring 3D Concrete Printing of Lattice Structures on Robotically-Shaped Sand Formwork for Circular Futures
285. Silveira Marcos, Wagner Juliana, Khanverdi Mohsen, Das Sreekanta (2024-02)
     Structural Performance of Large-Scale 3D Printed Walls Subjected to Axial Compression Load
286. Şahin Hatice, Mardani Ali, Beytekin Hatice (2024-02)
     Effect of Silica-Fume Utilization on Structural Build-Up, Mechanical and Dimensional Stability Performance of Fiber-Reinforced 3D Printable Concrete
287. Zhao Guoqi, Fan Yichang, Tang Can, Wei Yuanyuan et al. (2024-02)
     Preparation and Compressive Properties of Cementitious Composites Reinforced by 3D Printed Cellular Structures with a Negative Poisson's Ratio
288. Nóbrega Anna, Queiroz Junior Cleanto, Souza Wendell, Cabral Kleber et al. (2024-02)
     Computational Modeling for Structural Element Analysis Using Cement Composites in 3D Printing
289. Zhang Hongmei, Hu Fan, Duan Yuanfeng, Liao Jian et al. (2024-02)
     Mechanical Properties and Micro-Structure of Highly Flowable Geopolymer Composites with Low-Content Polyvinyl-Alcohol-Fiber
290. Li Yu, Wu Hao, Xie Xinjie, Zhang Liming et al. (2024-02)
     FloatArch:
     A Cable-Supported, Unreinforced, and Re-Assemblable 3D Printed Concrete Structure Designed Using Multi-Material Topology-Optimization
291. Khan Shoukat, İlcan Hüseyin, Imram Ramsha, Aminipour Ehsan et al. (2024-01)
     The Impact of Nozzle-Diameter and Printing Speed on Geopolymer-Based 3D Printed Concrete Structures:
     Numerical Modeling and Experimental Validation
292. Prem Prabhat, Ambily Parukutty, Kumar Shankar, Ghodke Swapnil (2024-01)
     A Theoretical Model to Predict the Structural Buildability of 3D Printable Concrete
293. Rehman Atta, Kim Ik-Gyeom, Kim Jung-Hoon (2024-01)
     Towards Full Automation in 3D Concrete Printing Construction:
     Development of an Automated and In-Line Test-Method for In-Situ Assessment of Structural Build-Up and Quality of Concrete
294. Maitenaz Sébastien, Mesnil Romain, Féraille Adélaïde, Caron Jean-François (2023-12)
     Materialising Structural Optimization of Reinforced Concrete Beams Through Digital Fabrication
295. Dey Dhrutiman, Nguyen Vuong, Nguyen-Xuan Hung, Srinivas Dodda et al. (2023-12)
     Flexural Performance of 3D Printed Concrete Structure with Lattice-Infills
296. Coward Andy, Sørensen Jesper (2023-12)
     3D Printed Concrete Beams as Optimised Load Carrying Structural Elements:
     The Minimass Beam
297. Khalilidermani Mitra, Knez Dariusz (2023-12)
     A Survey on Extraterrestrial Habitation Structures with a Focus on Energy-Saving 3D Printing Techniques
298. Peralta Abadi Patricia, Ahmad Muhammad, Smarsly Kay (2023-11)
     Printing-Information-Modeling for Additive Manufacturing of Concrete Structures
299. Liu Huawei, Liu Chao, Zhang Yamei, Bai Guoliang (2023-11)
     Bonding Properties Between 3D Printed Coarse Aggregate Concrete and Rebar Based on Interface Structural Characteristics
300. Wu Hao, Li Yu, Xie Xingje, Gao Xiaofan et al. (2023-11)
     Structural Performance-Based 3D Concrete Printing for an Efficient Concrete Beam
301. Dimitriou Savvas, Kontovourkis Odysseas (2023-11)
     Force-Flow Based 3D Printing of Structural Elements Inspired by the Traditional Architecture of Cross-Vaults
302. Coniglo Alfonso, Palmiotta Annarota, Amato Michele, Gigliotti Rosario (2023-11)
     Earth-3D Printing for Non-Structural Elements of Modular Steel Buildings:
     Proposal for an Innovative and Sustainable Construction System
303. Tabassum Nusrat, Duarte José, Nazarian Shadi (2023-11)
     Advancing 3D Concrete Printing for Affordable Housing:
     A Shape Grammar-Based Approach to Print Spanning-Roof Structures
304. Fu Yanan, Zhang Ying, Wu Lei (2023-11)
     Experimental Study on Structural Performance of Cast-in-Place Frame Printed Concrete Wall
305. Sangiorgio Valentino, Parisi Fabio, Graziano Angelo, Tina Giosmary et al. (2023-11)
     3D Printing of Viscous Materials in Construction:
     New Design Paradigm, from Small Components to Entire Structures
306. Zhao Zengfeng, Ji Chenyuan, Xiao Jianzhuang, Yao Lei et al. (2023-11)
     A Critical Review on Reducing the Environmental Impact of 3D Printing Concrete:
     Material-Preparation, Construction-Process and Structure-Level
307. Friese Danny, Hahn Lars, Le Xuan Hung, Mersch Johannes et al. (2023-10)
     Robot-Assisted Manufacturing Technology for 3D Non-Metallic Reinforcement Structures in the Construction Applications
308. Imram Ramsha, Rashid Ans, Khan Shoukat, İlcan Hüseyin et al. (2023-10)
     Buildability-Analysis on Squared Profile Structure in 3D Concrete Printing
309. Yang Wenwei, Wang Li, Hu Yuanyuan, Sanjayan Jay et al. (2023-10)
     An Integrated Topology-Optimization Method Including Manufacturing-Constraints for 3D Printed Fiber-Reinforced Concrete Structures
310. Skripkiūnas Gintautas, Girskas Giedrius, Rishko Lyudmyla (2023-10)
     Lightweight Portland Cement Mixtures with Perlite for 3D Printing of Concrete Structures
311. Kumar Lalit, Panda Biranchi, Muthu Nelson (2023-10)
     A Simple Potential Energy Formulation for 3D Concrete Printed Structures Considering the Shear Effects in the Build-Direction
312. Hass Lauri, Nefs Karsten, Bos Freek, Salet Theo (2023-10)
     Application Potential of Combining Strain-Hardening Cementitious Composites and Helical Reinforcement for 3D Concrete Printed Structures:
     Case Study of a Spiral Staircase
313. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2023-10)
     From Soil to Printed Structures:
     A Systematic Approach to Designing Clay-Based Materials for 3D Printing in Construction and Architecture
314. Wang Shih-Yuan, Liong Sze-Teng, Gan Y., Sheng Yu-Ting (2023-10)
     Cost-Effective Concrete Fabrication for Large Irregularly Shaped Architectural Structures
315. Dittel Gözdem, Scheurer Martin, Evers Clara, Meyer-Brötz Fabian et al. (2023-10)
     Structural Performance of Textile Reinforced 3D Printed Concrete Elements
316. Mata-Falcón Jaime, Gebhard Lukas, Lee Minu, Bischof Patrick (2023-10)
     Advances in Structural Applications of Digital Fabrication With Concrete
317. Freund Niklas, Dörrie Robin, David Martin, Kloft Harald et al. (2023-10)
     Enclosing Reinforcement Structures in Shotcrete 3D Printing:
     The Effect of Reinforcement Geometry and Accelerator Dosage on the Formation of Voids
318. Rothe Tom, Hühne Christian, Gantner Stefan, Hack Norman (2023-10)
     Dynamic Winding Process of Individualized Fiber-Reinforcement Structures for Additive Manufacturing in Construction
319. Perez-Rivera Anthony, Kreiger Eric, Stidwell Samuel, Stynoski Peter et al. (2023-10)
     Finite-Element Modeling of Reinforced Additively Constructed Concrete Structures
320. Ebadi-Jamkhaneh Mehdi, Kontoni Denise-Penelope, Ebrahimi Amir (2023-10)
     Three-Dimensional Printing of Structural Members with Shotcrete Technique:
     Design, Construction, and Future Directions
321. Tabakova Vesela, Klug Christina, Schmitz Thomas (2023-10)
     Dynamic Extrusion-Control in Spot-Deposition Modeling for Porous 3D Clay-Structures
322. Curbach Manfred, Hegger Josef, Bielak Jan, Schmidt Christopher et al. (2023-10)
     New Perspectives on Carbon Reinforced Concrete Structures:
     Why New Composites Need New Design-Strategies
323. Suryanto Benny, Higgins J., Aitken M., Tambusay Asdam et al. (2023-10)
     Developments in Portland Cement/GGBS Binders for 3D Printing Applications:
     Material-Calibration and Structural Testing
324. Lv Zhenyuan, Xiao Jianzhuang, Duan Zhenhua, Tang Yuxiang (2023-09)
     Time-Dependent Evolution and Strength Modulation of 3D Printed Concrete Pore-Structure Based on Microbial Remediation
325. Živković Milijana, Žujović Maša, Milošević Jelena (2023-09)
     Architectural 3D Printed Structures Created Using Artificial Intelligence:
     A Review of Techniques and Applications
326. Conrad John, Spencer Lawson, Amador Robert, Linnehan Tyler et al. (2023-09)
     Concrete Printed Gyroid Column:
     A Structurally Optimized, Sand Layer Supported Printing Method
327. Liu Dawei, Zhang Zhigang, Zhang Xiaoyue, Chen Zhaohui (2023-09)
     3D Printing Concrete Structures:
     State of the Art, Challenges, and Opportunities
328. Jia Zijian, Zhang Zedi, Jia Lutao, Cao Ruilin et al. (2023-09)
     Effect of Different Expansive Agents on the Early-Age Structural Build-Up Process of Cement-Paste
329. Jendele Libor, Rymeš Jiří, Červenka Jan (2023-09)
     Optimizing Digital 3D Printing of Concrete Structures
330. Zuo Zibo, Corte Wouter, Huang Y., Zhang L. et al. (2023-08)
     Measurement of the Density of Formed Structures for Concrete 3D Printing
331. Shilar Fatheali, Ganachari Sharanabasava, Patil Veerabhadragouda, Bhojaraja B. et al. (2023-08)
     A Review of 3D Printing of Geopolymer Composites for Structural and Functional Applications
332. Xu Yading, Šavija Branko (2023-08)
     3D Auxetic Cementitious-Polymeric Composite Structure with Compressive Strain-Hardening Behavior
333. Chen Quanyao, Gao Yuyue, Ding Lieyun, Cheng Zhou et al. (2023-07)
     Genetic Algorithm-Based Multiobjective Optimization for 3D Printable Design of a Double-Shell Lunar-Habitat-Structure
334. Du Longyu, Zhou Jiehang, Lai Jianzhong, Wu Kai et al. (2023-07)
     Effect of Pore-Structure on Durability and Mechanical Performance of 3D Printed Concrete
335. Dang Thi, Tran Mien (2023-07)
     Variation of the Adhesion Between Concrete Printed Layers in a 3D Concrete Printed Structure
336. Varela Hugo, Barluenga Gonzalo, Perrot Arnaud (2023-07)
     Extrusion and Structural Build-Up of 3D Printing Cement-Pastes with Fly-Ash, Nano-Clay and VMAs
337. Pillay Selicia, Walls Richard, Merwe Johann (2023-07)
     Conceptualising the Behavior of 3D Printed Concrete Structures in Fire
338. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2023-07)
     Design-Optimization Workflow for 3D Concrete Printing of Spanning Structures
339. Khan Shoukat, İlcan Hüseyin, Aminipour Ehsan, Şahin Oğuzhan et al. (2023-07)
     Buildability-Analysis on Effect of Structural Design in 3D Concrete Printing:
     An Experimental and Numerical Study
340. Dell’Endice Alessandro, Bouten Sam, Mele Tom, Block Philippe (2023-07)
     Structural Design and Engineering of Striatus, an Unreinforced 3D Concrete Printed Masonry Arch Bridge
341. Kalthoff Matthias, Bosbach Sven, Backes Jana, Cruz Cynthia et al. (2023-06)
     Fabrication of Lightweight, Carbon Textile Reinforced Concrete Components with Internally Nested Lattice Structure Using 2-Layer Extrusion by LabMorTex
342. Yang Hui-Qin, Klug Christina, Schmitz Thomas (2023-06)
     Fiber-Reinforced Clay:
     An Exploratory Study on Automated Thread Insertion for Enhanced Structural Integrity in LDM.
343. Salaimanimagudam M., Jayaprakash Jaganathan (2023-06)
     Effect of Printing Parameters on Inter-Filament Voids, Bonding, and Geometrical Deviation in Concrete 3D Printed Structures
344. Bello Nicholas, Memari Ali (2023-06)
     A Structural and Thermal Comparative Review of 3D Printed Wall Shapes
345. Katsiotis Marios, Michalis Vasileios, Papargyriou Despoina, Mavratzotis Emmanouil et al. (2023-06)
     3BUILD:
     First 3D Printed Structure in Greece
346. Pfleger Marc-Patrick, Geyer Sebastian, Hölzl Christian, Vill Markus (2023-06)
     Investigations to Improve the Carbon Footprint of Thin Walled Concrete Structures by 3D Printing Prefabricated Elements
347. Hou Shaodan, Duan Zhenhua, Ye Taohua, Zou Shuai et al. (2023-06)
     Mechanical Properties and Pore-Structure of 3D Printed Mortar with Recycled Powder
348. Pressmair Nadine, Kromoser Benjamin (2023-06)
     Development-Stages of Structurally Optimized Concrete Girders:
     Design-Concepts, Material-Strategies and Experimental Investigation
349. Richter Christiane, Jungwirth Jörg (2023-06)
     3D Concrete Printing:
     From Mechanical Properties to Structural Analysis
350. Chen Yu, Zhang Yu, He Shan, Liang Xuhui et al. (2023-06)
     Improving Structural Build-Up of Limestone-Calcined-Clay-Cement-Pastes by Using Inorganic Additives
351. Paudel Satish (2023-06)
     Investigation of Modelling Approaches to Study the Structural Performance of 3D Printed Plain Wall Under Uniform Axial Compression
352. Mohan Manu, Rahul Attupurathu, Stappen Jeroen, Cnudde Veerle et al. (2023-05)
     Assessment of Pore-Structure Characteristics and Tortuosity of 3D Printed Concrete Using Mercury-Intrusion-Porosimetry and X-Ray Tomography
353. Wan Qian, Yang Wenwei, Wang Li, Ma Guowei (2023-04)
     Global Continuous Path-Planning for 3D Concrete Printing Multi-Branched Structure
354. Simedru Alexandru, Becze Anca, Cadar Oana, Scurtu Daniela et al. (2023-04)
     Structural Characterization of Several Cement-Based Materials Containing Chemical Additives with Potential Application in Additive Manufacturing
355. Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2023-04)
     Probabilistic Prediction of Structural Failure During 3D Concrete Printing Processes
356. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2023-03)
     3D Printed Concrete with Recycled Sand:
     Pore-Structure and Triaxial Compression Properties
357. Huang Shuyi, Xu Weiguo, Yin Yudong (2023-03)
     Improving the Overhang of 3D Printed Concrete Shells by Wrinkle Structures
358. Chen Yanjuan, Kuva Jukka, Mohite Ashish, Li Zhongsen et al. (2023-03)
     Investigation of the Internal Structure of Hardened 3D Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance
359. Tahmasebinia Faham, Jabbari Amir, Skrzypkowski Krzysztof (2023-03)
     The Application of Finite Element Simulation and 3D Printing in Structural Design Within Construction Industry 4.0
360. Cui Dong, Wu Yingxuan, Xie Xiaoying, Tian Guanfei et al. (2023-03)
     Investigation on the Micro-Structure of a 3D Printed Mortar Through a Novel Leaching-Subsidiary Tomography
361. Huber Tobias, Burger Joris, Mata-Falcón Jaime, Kaufmann Walter (2023-03)
     Structural Design and Testing of Material-Optimized Ribbed RC Slabs with 3D Printed Formwork
362. Allameh Seyed, Miller Roger (2023-02)
     Evaluating the Structural Strength of Layered Concrete Reinforced with 3D-Welded Rebar
363. Waqar Ahsan, Othman Idris, Pomares Juan (2023-02)
     Impact of 3D Printing on the Overall Project Success of Residential Construction Projects Using Structural Equation Modelling
364. Burger Joris, Aejmelaeus-Lindström Johan, Gürel Şeyma, Niketić Filip et al. (2023-02)
     Eggshell Pavilion:
     A Reinforced Concrete Structure Fabricated Using Robotically 3D Printed Formwork
365. Gebhard Lukas, Mata-Falcón Jaime, Iqbal Arsalan, Kaufmann Walter (2023-01)
     Structural Behavior of Post-Installed Reinforcement for 3D Concrete Printed Shells:
     A Case Study on Water Tanks
366. Du Wenfeng, Zhu Liming, Zhang Hao, Zhou Zhiyong et al. (2023-01)
     Experimental and Numerical Investigation of an Innovative 3DPC Thin-Shell Structure
367. Xia Lingwei, Bi Minghao, Wu Jie, Wang Fang et al. (2023-01)
     Integrated Lightweight Design-Method via Structural Optimization and Path-Planning for Material-Extrusion
368. Raphael Benny, Senthilnathan Shanmugaraj, Patel Abhishek, Bhat Saqib (2023-01)
     A Review of Concrete 3D Printed Structural Members
369. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen (2022-12)
     Multi-Scale Structural Characteristics and Heat-Moisture Properties of 3D Printed Building Walls:
     A Review
370. Nefs Karsten, Menkovski Vlado, Bos Freek, Suiker Akke et al. (2022-12)
     Automated Image Segmentation of 3D Printed Fibrous Composite Micro-Structures Using a Neural Network
371. Bischof Patrick, Mata-Falcón Jaime, Ammann Rebecca, Näsbom Andreas et al. (2022-12)
     Digitally Fabricated Weak Interfaces to Reduce Minimum Reinforcement in Concrete Structures
372. Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
     Modelling of 3D Concrete Printing Process:
     A Perspective on Material and Structural Simulations
373. Senthilnathan Shanmugaraj, Raphael Benny (2022-11)
     Using Computer-Vision for Monitoring the Quality of 3D Printed Concrete Structures
374. Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
     Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features
375. Wang Lining, Aslani Farhad (2022-11)
     Structural Performance of Reinforced Concrete Beams with 3D Printed Cement-Based Sensor Embedded and Self-Sensing Cementitious Composites
376. Liu Zhixin, Li Mingyang, Wong Teck (2022-11)
     Investigations of Nozzle-Configuration and Process Parameters on Porosity Formation of the 3D Printed Structure
377. Alonso-Cañon Sara, Blanco-Fernandez Elena, Castro-Fresno Daniel, Yoris-Nobile Adrian et al. (2022-11)
     Reinforcements in 3D Printing Concrete Structures
378. Mesnil Romain, Poussard Valentin, Sab Karam, Caron Jean-François (2022-11)
     On the Geometrical Origin of the Anisotropy in Extrusion-Based 3D Printed Structures
379. Kan Deyuan, Liu Guifeng, Cao Shuang, Chen Zhengfa et al. (2022-11)
     Mechanical Properties and Pore-Structure of Multi-Walled Carbon-Nano-Tube-Reinforced Reactive Powder-Concrete for Three-Dimensional Printing Manufactured by Material-Extrusion
380. Liu Kewei, Meng Qingfei, Kong Qingzhao, Zhang Xihong (2022-11)
     Review on the Developments of Structure, Construction Automation, and Monitoring of Intelligent Construction
381. Nguyen Vuong, Liu Junli, Li Shuai, Zhang Guomin et al. (2022-10)
     Modelling of 3D Printed Bio-Inspired Bouligand Cementitious Structures Reinforced with Steel-Fibers
382. Dörrie Robin, Laghi Vittoria, Arrè Lidiana, Kienbaum Gabriela et al. (2022-10)
     Combined Additive Manufacturing Techniques for Adaptive Coastline Protection Structures
383. Che Yujun, Yang Huashan (2022-10)
     Hydration Products, Pore-Structure, and Compressive Strength of Extrusion-Based 3D Printed Cement-Pastes Containing Nano-Calcium-Carbonate
384. Deng Zhicong, Jia Zijian, Zhang Chao, Wang Zhibin et al. (2022-10)
     3D Printing Lightweight Aggregate Concrete Prepared with Shell-Packing-Aggregate Method:
     Printability, Mechanical Properties and Pore-Structure
385. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2022-09)
     3D Printing Effect on the Compressive Strength of Concrete Structures
386. Ma Lei, Zhang Qing, Lombois-Burger Hélène, Jia Zijian et al. (2022-09)
     Pore-Structure, Internal Relative Humidity, and Fiber-Orientation of 3D Printed Concrete with Polypropylene-Fiber and Their Relation with Shrinkage
387. Solonina Valentina, Surovtsev I., Butakova M. (2022-09)
     Optimizing the Structure of Construction Mixes for 3D Printing
388. Chen Yuning, Zhang Yamei, Xie Yudong, Zhang Zedi et al. (2022-09)
     Unraveling Pore-Structure Alternations in 3D Printed Geopolymer Concrete and Corresponding Impacts on Macro-Properties
389. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2022-09)
     Topology-Optimization of Structural Beam Systems considering 3D Concrete Printing Technology-Constraints
390. Park Ji-seul, Jeong Seung-Su, Hong Sung-Gul (2022-09)
     Numerical Analysis on Stability of Cylindrical Structures in 3D Printing Process
391. Ivaniuk Egor, Tošić Zlata, Eichenauer Martin, Müller Steffen et al. (2022-09)
     Automated Production of Textile Reinforced Concrete Modules for the Assembly of Shell Structures
392. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-09)
     3D Printing Concrete with Recycled Coarse Aggregates:
     The Influence of Pore-Structure on Inter-Layer Adhesion
393. Ahmed Hassan, Giwa Ilerioluwa, Game Daniel, Hebert Marc et al. (2022-09)
     Studying Steel-Fiber-Reinforcement for 3D Printed Elements and Structures
394. Pham Thi, Nguyen Thu, Trinh Thanh, Nguyen Anh et al. (2022-08)
     Development of 3D Printers for Concrete Structures:
     Mix Proportion Design Approach and Laboratory Testing
395. Chang Ze, Liang Minfei, Xu Yading, Schlangen Erik et al. (2022-08)
     3D Concrete Printing:
     Lattice Modeling of Structural Failure considering Damage and Deformed Geometry
396. Briels David, Kollmannsberger Stefan, Leithner Felicitas, Matthäus Carla et al. (2022-07)
     Thermal Optimization of Additively Manufactured Lightweight Concrete Wall Elements with Internal Cellular Structure through Simulations and Measurements
397. Lin Alexander, Goel Abhimanyu, Wong De, Yeo Charlene et al. (2022-07)
     Compressive Load-Dominated Concrete Structures for Customized 3D Printing Fabrication
398. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2022-07)
     Numerical Modeling of 3D Concrete Printing Wall Structure to Reliably Estimate the Failure Mechanisms
399. Fairbairn Eduardo, Santos Larissa, Farias Marina, Mendoza Reales Oscar (2022-07)
     Numerical Modeling of New Conceptions of 3D Printed Concrete Structures for Pumped Storage Hydropower
400. Aziz Saqib, Kim Ji-Su, Stephan Dietmar, Gengnagel Christoph (2022-06)
     Generative Structural Design:
     A Cross-Platform Design and Optimization Workflow for Additive Manufacturing
401. Douba Ala, Badjatya Palash, Kawashima Shiho (2022-06)
     Influence of Infill-Pattern on Reactive MgO Printed Structures
402. Mezhov Alexander, Robens-Radermacher Annika, Zhang Kun, Kühne Hans-Carsten et al. (2022-06)
     Temperature Impact on the Structural Build-Up of Cementitious Materials:
     Experimental and Modelling Study
403. Ye Junhong, Weng Yiwei, Du Hongjian, Li Mingyang et al. (2022-06)
     Feasibility of Using Ultra-High-Ductile Concrete to Print Self-Reinforced Hollow Structures
404. Cho Seung, Heever Marchant, Kruger Jacques, Zijl Gideon (2022-06)
     Proof of Concept:
     Sprayable SHCC Overlay Reinforcement Regime for Unreinforced 3D Printed Concrete Structure
405. Putten Jolien, Hoogeveen Maartje, Bruurs Marijn, Laagland Hans (2022-06)
     3DCP Structures:
     The Roadmap to Standardization
406. Kruger Jacques, Mostert Jean-Pierre, Zijl Gideon (2022-06)
     A Strain-Based Constitutive Model Ensuring Aesthetic 3D Printed Concrete Structures:
     Limiting Differential Settlement of Filaments
407. Kovaleva Daria, Nistler Maximilian, Verl Alexander, Blandini Lucio et al. (2022-06)
     Zero-Waste Production of Lightweight Concrete Structures with Water-Soluble Sand Formwork
408. Rodriguez Fabian, Lopez Cristian, Wang Yu, Olek Jan et al. (2022-06)
     Evaluation of Durability of 3D Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments
409. Xiao Yinan, Hack Norman, Kloft Harald (2022-06)
     Digital Structural Design and Shotcrete 3D Printing-Strategies for Lightweight Reinforced Concrete Beam-Grid Structures
410. Chang Ze, Wan Zhi, Xu Yading, Schlangen Erik et al. (2022-06)
     Convolutional Neural Network for Predicting Crack-Pattern and Stress-Crack-Width Curve of Air-Void Structure in 3D Printed Concrete
411. Nemova Darya, Kotov Evgeny, Andreeva Darya, Khorobrov Svyatoslav et al. (2022-06)
     Experimental Study on the Thermal Performance of 3D Printed Enclosing Structures
412. Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
     Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
     A Review
413. Breseghello Luca, Naboni Roberto (2022-05)
     Tool-Path -Based Design for 3D Concrete Printing of Carbon-Efficient Architectural Structures
414. Yang Rijiao, Zeng Qiang, Peng Yu, Wang Hailong et al. (2022-05)
     Anomalous Matrix and Inter-Layer Pore-Structure of 3D Printed Fiber-Reinforced Cementitious Composites
415. Wu Hao, Li Ziyan, Zhou Xinjie, Wu Xinyu et al. (2022-04)
     Digital Design and Fabrication of a 3D Concrete Printed Funicular Spatial Structure
416. Park Min, Cheon Gain, Alemayehu Robel, Ju Young et al. (2022-04)
     Seismic Performance of F3D Free-Form Structures Using Small-Scale Shaking Table Tests
417. Fuente Albert, Blanco Ana, Galeote Eduardo, Cavalaro Sergio (2022-04)
     Structural Fiber-Reinforced Cement-Based Composite Designed for Particle-Bed 3D Printing Systems:
     Case Study Parque De Castilla Footbridge in Madrid
418. Kovaleva Daria, Nistler Maximilian, Blandini Lucio, Sobek Werner et al. (2022-04)
     Recyclable Sand Formwork:
     Towards Circular Production of Lightweight Concrete Structures
419. Nguyen Vuong, Nguyen-Xuan Hung, Panda Biranchi, Tran Jonathan (2022-03)
     3D Concrete Printing Modelling of Thin-Walled Structures
420. Bos Freek, Menna Costantino, Pradena Mauricio, Kreiger Eric et al. (2022-03)
     The Realities of Additively Manufactured Concrete Structures in Practice
421. Gebhard Lukas, Burger Joris, Mata-Falcón Jaime, Lloret-Fritschi Ena et al. (2022-03)
     Towards Efficient Concrete Structures with Ultra-Thin 3D Printed Formwork:
     Exploring Reinforcement-Strategies and Optimization
422. Liu Junli, Nguyen Vuong, Panda Biranchi, Fox Kate et al. (2022-02)
     Additive Manufacturing of Sustainable Construction Materials and Form-Finding Structures:
     A Review on Recent Progresses
423. Pastore Tommaso, Menna Costantino, Asprone Domenico (2022-01)
     Bézier-Based Biased Random-Key Genetic Algorithm to Address Printability-Constraints in the Topology-Optimization of Concrete Structures
424. Asprone Domenico, Menna Costantino, Bos Freek, Mata-Falcón Jaime et al. (2022-01)
     Structural Design and Testing of Digitally Manufactured Concrete Structures
425. Liu Junli, Li Shuai, Fox Kate, Tran Jonathan (2021-12)
     3D Concrete Printing of Bio-Inspired Bouligand Structure:
     A Study on Impact-Resistance
426. Diggs-McGee Brandy, Kreiger Eric (2021-12)
     Using Isolated Temporal Analysis to Aid in the Assessment of Structural Element Quality for Additive Construction
427. Ma Lei, Zhang Qing, Jia Zijian, Liu Chao et al. (2021-11)
     Effect of Drying Environment on Mechanical Properties, Internal RH and Pore-Structure of 3D Printed Concrete
428. Izadgoshasb Hamed, Kandiri Amirreza, Shakor Pshtiwan, Laghi Vittoria et al. (2021-11)
     Predicting Compressive Strength of 3D Printed Mortar in Structural Members Using Machine Learning
429. Liu Chao, Zhang Rongfei, Liu Huawei, He Chunhui et al. (2021-11)
     Analysis of the Mechanical Performance and Damage Mechanism for 3D Printed Concrete Based on Pore-Structure
430. Liu Xuanting, Sun Bohua (2021-11)
     The Influence of Interface on the Structural Stability in 3D Concrete Printing Processes
431. Block Philippe (2021-11)
     No Reinforcement:
     Compression-Only Structures
432. Ahmed Zeeshan, Wolfs Robert, Bos Freek, Salet Theo (2021-11)
     A Framework for Large-Scale Structural Applications of 3D Printed Concrete:
     The Case of a 29m Bridge in the Netherlands
433. Straßer Alexander, Weger Daniel, Matthäus Carla, Kränkel Thomas et al. (2021-11)
     Combining Wire and Arc Additive Manufacturing and Selective Paste-Intrusion for Additively Manufactured Structural Concrete
434. Suiker Akke (2021-11)
     Effect of Accelerated Curing and Layer Deformations on Structural Failure During Extrusion-Based 3D Printing
435. Paiva Maria, Duarte Fonseca Rocha Larissa, Fernandez Letízia, Toledo Filho Romildo et al. (2021-11)
     Rheological Properties of Metakaolin-Based Geopolymers for Three-Dimensional Printing of Structures
436. Fischer Gregor, Paegle Ieva (2021-11)
     Reinforcement of Three-Dimensional-Printed Concrete Structures by Weaving and Knitting of Continuous Fibers and Wires
437. Nováková Kateřina, Vele Jiří (2021-09)
     Prvok:
     An Experiment with 3D Printing Large Doublecurved Concrete Structure
438. Miranda Luiza, Lesage Karel, Schutter Geert (2021-09)
     Understanding the Structural Build-Up-Rate of Cementitious Materials for 3D Printing
439. Duarte Gonçalo, Brown Nathan, Memari Ali, Duarte José (2021-07)
     Learning from Historical Structures under Compression for Concrete 3D Printing Construction
440. Lowke Dirk, Vandenberg Aileen, Pierre Alexandre, Thomas Amaury et al. (2021-07)
     Injection 3D Concrete Printing in a Carrier Liquid:
     Underlying Physics and Applications to Lightweight Space Frame Structures
441. Karpova Ekaterina, Skripkiūnas Gintautas, Sedova Anastasiia, Tsimbalyuk Yelyzaveta (2021-07)
     Additive Manufacturing of Concrete Wall-Structures
442. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom et al. (2021-06)
     Numerical Simulation for 3D Printed Wall Structure During the Process of Printing Considering Uncertainty
443. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2021-04)
     Structural Behavior of 3D Printed Concrete Beams with Various Reinforcement-Strategies
444. Pott Ursula, Stephan Dietmar (2021-04)
     Penetration-Test as a Fast Method to Determine Yield-Stress and Structural Build-Up for 3D Printing of Cementitious Materials
445. Baz Bilal, Aouad Georges, Kleib Joelle, Bulteel David et al. (2021-04)
     Durability-Assessment and Micro-Structural Analysis of 3D Printed Concrete Exposed to Sulfuric-Acid Environments
446. Dielemans Gido, Briels David, Jaugstetter Fabian, Henke Klaudius et al. (2021-04)
     Additive Manufacturing of Thermally Enhanced Lightweight Concrete Wall Elements with Closed Cellular Structures
447. Marais Hannelie, Christen Heidi, Cho Seung, Villiers Wibke et al. (2021-03)
     Computational Assessment of Thermal Performance of 3D Printed Concrete Wall Structures with Cavities
448. Canou Joseph, Uhart Maylis, Diaz Pierre (2021-02)
     A “Low-Cost” Subtractive Method for Freshly Finished 3D Concrete Printed Structures
449. Archez Julien, Maitenaz Sébastien, Demont Léo, Charrier Malo et al. (2021-02)
     Strategy to Shape, on a Half-Meter Scale, a Geopolymer Composite Structure by Additive Manufacturing
450. Lim Jian, Zhang Xu, Ting Guan, Pham Quang-Cuong (2021-02)
     Stress-Cognizant 3D Printing of Free-Form Concrete Structures
451. Pan Tinghong, Jiang Yaqing, He Hui, Wang Yu et al. (2021-01)
     Effect of Structural Build-Up on Inter-Layer Bond Strength of 3D Printed Cement Mortars
452. Chen Mingxu, Yang Lei, Zheng Yan, Li Laibo et al. (2021-01)
     Rheological Behaviors and Structure Build-Up of 3D Printed Polypropylene- and Polyvinyl-Alcohol-Fiber-Reinforced Calcium-Sulphoaluminate-Cement Composites
453. Dubov Alexey, Ruben Sam, Korshikov Vasily, Ivanova Anna et al. (2020-11)
     3D Printing of Polymers with Continuous Fibers to Replace Steel-Reinforcement and Structural Steel in Construction
454. Zhang Yi, Jiang Zhengwu, Zhu Yanmei, Zhang Jie et al. (2020-10)
     Effects of Redispersible Polymer-Powders on the Structural Build-Up of 3D Printing Cement Paste with and without Hydroxypropyl-Methylcellulose
455. Qin Hao, Zhang Xiwen (2020-10)
     Improvements on the Design of Sand-Structure Additive Manufacturing
456. Geng Zifan, She Wei, Zuo Wenqiang, Lyu Kai et al. (2020-09)
     Layer-Interface Properties in 3D Printed Concrete:
     Dual Hierarchical Structure and Micromechanical Characterization
457. Xu Weiguo, Gao Yuan, Sun Chenwei, Wang Zhi (2020-09)
     Fabrication and Application of 3D Printed Concrete Structural Components in the Boshan Pedestrian Bridge Project
458. Pudjisuryadi Pamuda, Antoni Antoni, Chandra Jimmy (2020-09)
     Review on 3D Printed Concrete as Structural Beam Members
459. Mahadevan Meera, Francis Ann, Thomas Albert (2020-08)
     A Simulation-Based Investigation of Sustainability Aspects of 3D Printed Structures
460. Nething Christoph, Smirnova Maya, Gröning Janosch, Haase Walter et al. (2020-08)
     A Method for 3D Printing Bio-Cemented Spatial Structures Using Sand and Urease-Active-Calcium-Carbonate-Powder
461. Li Zhijian, Wang Li, Ma Guowei, Sanjayan Jay et al. (2020-07)
     Strength and Ductility Enhancement of 3D Printing Structure Reinforced by Embedding Continuous Micro-Cables
462. Burger Joris, Lloret-Fritschi Ena, Taha Nizar, Scotto Fabio et al. (2020-07)
     Design and Fabrication of a Non-Standard, Structural Concrete Column Using Eggshell:
     Ultra-Thin, 3D Printed Formwork
463. Pastore Tommaso, Menna Costantino, Asprone Domenico (2020-07)
     Combining Multiple Loads in a Topology-Optimization Framework for Digitally Fabricated Concrete Structures
464. Markin Slava, Ivanova Irina, Fataei Shirin, Reißig Silvia et al. (2020-07)
     Investigation on Structural Build-Up of 3D Printable Foam-Concrete
465. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Wangler Timothy et al. (2020-07)
     ACDC:
     The Admixture-Controlled Digital Casting and Its Application to Thin-Folded Concrete Structures
466. Duballet Romain, Mesnil Romain, Ducoulombier Nicolas, Carneau Paul et al. (2020-07)
     Free Deposition-Printing for Space-Truss-Structures
467. Lee Minu, Mata-Falcón Jaime, Popescu Mariana, Block Philippe et al. (2020-07)
     Potential Approaches for Reinforcing Complex Concrete Structures with Integrated Flexible Formwork
468. Vantyghem Gieljan, Steeman Marijke, Corte Wouter, Boel Veerle (2020-07)
     Design-Optimization for 3D Concrete Printing:
     Improving Structural and Thermal Performances
469. Toklu Yusuf, Bekdaş Gebrail, Geem Zong (2020-06)
     Harmony-Search-Optimization of Nozzle Movement for Additive Manufacturing of Concrete Structures and Concrete Elements
470. Yuan Qiang, Zhou Dajun, Huang Hai, Peng Jianwei et al. (2020-06)
     Structural Build-Up, Hydration and Strength Development of Cement-Based Materials with Accelerators
471. Kim Seonghoon, Kim Taewook, Kim Buyoung, Kim Hong-dae et al. (2020-06)
     Early Hydration and Hardening of OPC-CSA Blends for Cementitious Structure of 3D Printing
472. Kontovourkis Odysseas, Phocas Marios, Tryfonos George, Georgiou Christos (2020-05)
     Multi-Axis 3D Printing of Material-Reduced Shell-Structures on a Reconfigurable Supporting-System Using Topology-Optimization Principles
473. Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
     Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete
474. Burger Joris, Lloret-Fritschi Ena, Scotto Fabio, Demoulin Thibault et al. (2020-04)
     Eggshell:
     Ultra-Thin Three-Dimensional Printed Formwork for Concrete Structures
475. Chen Mingxu, Yang Lei, Zheng Yan, Huang Yongbo et al. (2020-04)
     Yield-Stress and Thixotropy-Control of 3D Printed Calcium-Sulfoaluminate Cement Composites with Metakaolin Related to Structural Build-Up
476. Hack Norman, Dörfler Kathrin, Walzer Alexander, Wangler Timothy et al. (2020-03)
     Structural Stay-in-Place Formwork for Robotic In-Situ Fabrication of Non-Standard Concrete Structures:
     A Real-Scale Architectural Demonstrator
477. Ivanova Irina, Mechtcherine Viktor (2020-03)
     Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield-Stress and Structural Build-Up of Fresh Concrete
478. Perrot Arnaud, Jacquet Yohan, Rangeard Damien, Courteille Eric et al. (2020-03)
     Nailing of Layers:
     A Promising Way to Reinforce Concrete 3D Printing Structures
479. Jo Jun, Jo Byung, Cho Woohyun, Kim Jung-Hoon (2020-03)
     Development of a 3D Printer for Concrete Structures:
     Laboratory Testing of Cementitious Materials
480. Wang Li, Jiang Hailong, Li Zhijian, Ma Guowei (2020-02)
     Mechanical Behaviors of 3D Printed Lightweight Concrete Structure with Hollow Section
481. Ivanova Irina, Mechtcherine Viktor (2020-01)
     Possibilities and Challenges of Constant Shear-Rate-Test for Evaluation of Structural Build-Up-Rate of Cementitious Materials
482. Bos Freek, Ahmed Zeeshan, Rodríguez Claudia, Figueiredo Stefan (2019-12)
     3D Concrete Printing for Structural Applications
483. Gradeci Klodian, Labonnote Nathalie (2019-11)
     On the Potential of Integrating Building Information Modelling for the Additive Manufacturing of Concrete Structures
484. Nazarian Shadi, Duarte José, Bilén Sven, Memari Ali et al. (2019-11)
     Additive Manufacturing of Architectural Structures:
     An Interplay Between Materials, Systems, and Design
485. Celorrio-Barragué Luis, Calvo-Simón Sergio, Gaspar Marcelo, Vidal-Cortés Mariano et al. (2019-10)
     3D Printed Models-Based Lab Activities to Enhance Learning-Teaching Processes in Structural Engineering Courses
486. Panda Biranchi, Mohamed Nisar, Tan Ming (2019-09)
     Rheology and Structural Rebuilding of One-Part Geopolymer Mortar in the Context of 3D Concrete Printing
487. Gaag Bert, Ijselmuijden Kees, Kardas Maurice, Herwaarden Joël et al. (2019-09)
     Structural Bridge Design for Additive Manufacturing
488. Rutzen Matthias, Volkmer Dirk, Weiss Ursula, Reischmann Lisa et al. (2019-09)
     Micro-Structural Analysis of Crack-Growth Caused by Static and Dynamic Loads in a Carbon-Fiber-Reinforced Cement-Paste
489. Jendele Libor, Červenka Jan, Vaitová Michaela (2019-09)
     FEM Modelling of Digitally Printed Concrete Structures Using 3D-Extrusion
490. Silva Wilson, Fryda Hervé, Bousseau Jean-Noël, Andreani Pierre-Antoine et al. (2019-07)
     Evaluation of Early-Age Concrete Structural Build-Up for 3D Concrete Printing by Oscillatory Rheometry
491. Vantyghem Gieljan, Corte Wouter, Steeman Marijke, Boel Veerle (2019-07)
     Density-Based Topology-Optimization for 3D Printable Building Structures
492. Wolfs Robert, Suiker Akke (2019-06)
     Structural Failure During Extrusion-Based 3D Printing Processes
493. Mendoza Reales Oscar, Duda Pedro, Silva Emílio, Paiva Maria et al. (2019-06)
     Nanosilica-Particles as Structural Buildup Agents for 3D Printing with Portland Cement-Pastes
494. Soto Borja, Agustí-Juan Isolda, Joss Samuel, Hunhevicz Jens (2019-05)
     Implications of Construction 4.0 to the Workforce and Organizational Structures
495. Hack Norman, Lindemann Hendrik, Kloft Harald (2019-05)
     Adaptive Modular Spatial Structures for Shotcrete 3D Printing
496. Perrot Arnaud, Rangeard Damien (2019-04)
     3D Printing with Concrete:
     Impact and Designs of Structures
497. Tay Yi, Li Mingyang, Tan Ming (2019-04)
     Effect of Printing Parameters in 3D Concrete Printing:
     Printing Region and Support Structures
498. Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2019-02)
     Mechanical Properties of Structures 3D Printed with Cementitious Powders
499. Huang Hai, Huang Tingjie, Yuan Qiang, Zhou Dajun et al. (2019-01)
     Temperature-Dependence of Structural Build-Up and Its Relation with Hydration Kinetics of Cement-Paste
500. Chaar Ghassan, Stynoski Peter, Banko Marion (2018-11)
     Structural Behavior of Layer-Printed Reinforced Concrete Beams
501. Nerella Venkatesh, Beigh Mirza, Fataei Shirin, Mechtcherine Viktor (2018-11)
     Strain-Based Approach for Measuring Structural Build-Up of Cement-Pastes in the Context of Digital Construction
502. Zivkovic Sasa, Battaglia Christopher (2018-10)
     Rough-Pass-Extrusion-Tooling:
     CNC Post-Processing of 3D Printed Sub-Additive Concrete Lattice-Structures
503. Battaglia Christopher, Miller Martin, Zivkovic Sasa (2018-09)
     Sub-Additive 3D Printing of Optimized Double Curved Concrete Lattice Structures
504. Søndergaard Asbjørn, Feringa Jelle, Stan Florin, Maier Dana (2018-09)
     Realization of Topology Optimized Concrete Structures Using Robotic Abrasive Wire-Cutting of Expanded Polystyrene Formwork
505. Bao Yi, Xu Mingfeng, Soltan Daniel, Xia Tian et al. (2018-09)
     Three-Dimensional Printing Multifunctional Engineered Cementitious Composites (ECC) for Structural Elements
506. Lindemann Hendrik, Gerbers Roman, Ibrahim Serhat, Dietrich Franz et al. (2018-09)
     Development of a Shotcrete 3D Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures
507. Putten Jolien, Schutter Geert, Tittelboom Kim (2018-09)
     The Effect of Print Parameters on the (Micro)structure of 3D Printed Cementitious Materials
508. Mata-Falcón Jaime, Bischof Patrick, Kaufmann Walter (2018-09)
     Exploiting the Potential of Digital Fabrication for Sustainable and Economic Concrete Structures
509. Vantyghem Gieljan, Boel Veerle, Corte Wouter, Steeman Marijke (2018-09)
     Compliance, Stress-Based and Multi-Physics Topology-Optimization for 3D Printed Concrete Structures
510. Borg Costanzi Christopher, Ahmed Zeeshan, Schipper Roel, Bos Freek et al. (2018-07)
     3D Printing Concrete on Temporary Surfaces:
     The Design and Fabrication of a Concrete Shell Structure
511. Herrmann Eric, Mainka Jeldrik, Lindemann Hendrik, Wirth Franz et al. (2018-07)
     Digitally Fabricated Innovative Concrete Structures
512. Al-Qutaifi Sarah, Nazari Ali, Bagheri Ali (2018-07)
     Mechanical Properties of Layered Geopolymer Structures Applicable in Concrete 3D Printing
513. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2018-06)
     The Role of Early-Age Structural Build-Up in Digital Fabrication with Concrete
514. Lao Wenxin, Tay Yi, Quirin Didier, Tan Ming (2018-05)
     The Effect of Nozzle Shapes on the Compactness and Strength of Structure Printed in Additive Manufacturing of Concrete
515. Ibrahim Serhat, Olbrich Alexander, Lindemann Hendrik, Gerbers Roman et al. (2018-02)
     Automated Additive Manufacturing of Concrete Structures without Formwork:
     Concept for Path-Planning
516. Suiker Akke (2018-01)
     Mechanical Performance of Wall Structures in 3D Printing Processes:
     Theory, Design Tools and Experiments
517. Yuan Qiang, Zhou Dajun, Li Baiyun, Huang Hai et al. (2017-11)
     Effect of Mineral Admixtures on the Structural Build-Up of Cement-Paste
518. Richardson Victoria (2017-10)
     3D Printing Becomes Concrete:
     Exploring the Structural Potential of Concrete 3D Printing
519. Zareiyan Babak, Khoshnevis Behrokh (2017-08)
     Effects of Interlocking on Inter-Layer Adhesion and Strength of Structures in 3D Printing of Concrete
520. Craveiro Flávio, Bártolo Helena, Gale Andrew, Duarte José et al. (2017-07)
     A Design Tool for Resource-Efficient Fabrication of 3D Graded Structural Building Components Using Additive Manufacturing
521. Zareiyan Babak, Khoshnevis Behrokh (2017-06)
     Inter-Layer Adhesion and Strength of Structures in Contour Crafting:
     Effects of Aggregate-Size, Extrusion-Rate, and Layer-Thickness
522. Martens Pascal, Mathot Maarten, Bos Freek, Coenders Jeroen (2017-06)
     Optimizing 3D Printed Concrete Structures Using Topology Optimization
523. Salet Theo, Bos Freek, Wolfs Robert, Ahmed Zeeshan (2017-06)
     3D Concrete Printing:
     A Structural Engineering Perspective
524. Agustí-Juan Isolda, Müller Florian, Hack Norman, Wangler Timothy et al. (2017-04)
     Potential Benefits of Digital Fabrication for Complex Structures:
     Environmental Assessment of a Robotically Fabricated Concrete Wall
525. Qian Ye, Kawashima Shiho (2016-09)
     Use of Creep Recovery Protocol to Measure Static Yield-Stress and Structural Rebuilding of Fresh Cement-Pastes
526. Neudecker Stefan, Bruns Christopher, Gerbers Roman, Heyn Jakob et al. (2016-05)
     A New Robotic Spray Technology for Generative Manufacturing of Complex Concrete-Structures without Formwork
527. Aejmelaeus-Lindström Johan, Willmann Jan, Tibbits Skylar, Gramazio Fabio et al. (2016-04)
     Jammed Architectural Structures:
     Towards Large-Scale Reversible Construction
528. Duballet Romain, Gosselin Clément, Roux Philippe (2015-10)
     Additive Manufacturing and Multi-Objective Optimization of Graded Polystyrene-Aggregate Concrete Structures
529. Werkheiser Niki, Edmunson Jennifer, Fiske Michael, Khoshnevis Behrokh (2015-09)
     On the Development of Additive Construction Technologies for Application to Development of Lunar/Martian Surface Structures Using In-Situ Materials
530. Khoshnevis Behrokh, Yuan Xiao, Zahiri Behnam, Zhang Jing et al. (2015-09)
     Deformation-Analysis of Sulfur-Concrete Structures Made by Contour Crafting
531. Wolfs Robert, Salet Theo, Hendricks Berry (2015-08)
     3D Printing of Sustainable Concrete Structures
532. Feng Peng, Meng Xinmiao, Chen Jian-Fei, Ye Lieping (2015-06)
     Mechanical Properties of Structures 3D Printed with Cementitious Powders
533. Yossef Mostafa, Chen An (2015-06)
     Applicability and Limitations of 3D Printing for Civil Structures
534. Perrot Arnaud, Rangeard Damien, Pierre Alexandre (2015-02)
     Structural Build-Up of Cement-Based Materials Used for 3D Printing-Extrusion-Techniques
535. Lloret-Fritschi Ena, Shahab Amir, Linus Mettler, Flatt Robert et al. (2014-03)
     Complex Concrete Structures:
     Merging Existing Casting Techniques with Digital Fabrication
536. Howe Scott, Wilcox Brian, McQuin Christopher, Townsend Julie et al. (2013-09)
     Faxing Structures to the Moon:
     Freeform Additive Construction System (FACS)