#fiber¶

Keywords by Co - Occurrence¶

#print (341) #reinforcement (255) #concrete (230) #cement (119) #property (108)

1. Topolář Libor, Pazdera Luboš, Dvořák Karel, Černý Felix et al. (2026-04)
   Acoustic Emission Analysis of Tensile Failure in Layered 3D-Printed Fibre-Reinforced Fine-Grained Concrete
2. Ali Muhammad, Qian Hui, Umar Muhammad, Wang Puhan et al. (2026-04)
   Flexural Performance of ECC Thin-Plate Reinforced with Shape Memory Alloy Fibre Fabricated by Extrusion-Based 3D-Printing
3. Janghorban Emad, Joshi Arpan, Gaspar Florindo (2026-04)
   Evaluating the Effect of Glass and Carbon Fiber Mesh on 3D-Printed Concrete Performance
4. Yang Xia, Wang Jiuyuan, Zhang Zhenming, Tan Yushuang et al. (2026-04)
   A Comparative Analysis of 3D-Printed Concrete Incorporating Fibers and Fiber Grids:
   Mechanical Properties and Microstructure
5. Wang Guosheng, Zhang Ziyi, Tao Junwei, Tian Gang et al. (2026-04)
   Anisotropic Fracture Behavior of PAN Fiber Reinforced 3D Printed Concrete:
   Crack Evolution and Fiber Orientation Toughening Mechanism
6. Mbabazi Justin, Wang Yalun, Luo Zhenhua, Gao Lanqi et al. (2026-04)
   Structural and Functional Performance of 3D-Printed Light-Transmitting Foamed Concrete with Different Cavity Geometries and Fiber Orientations
7. Li Haodao, Khayat Kamal (2026-04)
   Extrusion-Based 3D Printing of Fiber-Reinforced Concrete
8. Zhu Tao, Wu Yuching, Zhi Peng, Zhu Peng et al. (2026-03)
   Non-Ordinary State-Based Peridynamics Simulation for Crack Propagation of 3D-Printed Fiber-Reinforced Concrete Beam Under Bending
9. Jiang Youbau, Li Shuaifeng, Xia Jiahui, Yang Fan et al. (2026-03)
   Experimental Studies on Impact Resistance of 3D Printed Concrete Spherical Structure with Carbon Fiber Reinforced PLA Honeycomb Energy Absorber
10. Qi Pengfei, Zhao Wenhao, Yang Bo, Wang Ziyuan et al. (2026-03)
    GRA-RSM Based Optimization Model for the Mechanical Performance of 3D Printed Basalt Fiber Concrete
11. Krishnaraja A., Kulanthaivel P., Manoharan Arunkumar, Muthusamy Suresh et al. (2026-03)
    Engineered Cementitious Composites with Nano Calcium Carbonate and Corona Waste Mask Fibers for Sustainable 3D Printing Applications
12. Uehara Shoma, Ohshiro Yusei, Shima Kanako, Sakamoto Kazuya et al. (2026-03)
    Evaluation of Static Yield Stress and Buildability of PVA Fiber-Reinforced Mortars for 3D Printing Using a Vane Shear Test
13. Hu Zhiheng, Elchalakani Mohamed, Ayough Pouria, Yang Bo et al. (2026-03)
    Determination of Tensile Strength and Fracture Toughness of 3D-Printed Ultra-Lightweight Engineered Cementitious Composites Reinforced with Fibre-Reinforced Polymer Mesh
14. Wu Jie, Huang Bo-Tao, Zhong Zhen, Sanjayan Jay et al. (2026-03)
    Fracture Mechanisms of 3D-Printed Ultra-High-Performance Concrete:
    Pore-Fibre-Interface Synergy
15. Sun Hou-Qi, Xie Shan-Shan, Zeng Jun-Jie, Zhuge Yan (2026-03)
    3D-Printed Concrete with In-Process Embedded Fiber-Reinforced Polymer Grid Reinforcement
16. Dhakal Suvechha, Tiwari Nitin (2026-03)
    Printability and Structural Integrity of Fiber-Reinforced Earth-Based Materials for 3D Printing
17. Liu Jiaxu, Zhang Nan, Xie Xiangyu, Sanjayan Jay et al. (2026-02)
    Orientation and Spatial Distribution of Pores and Fibers in Concrete Elements Produced by Extrusion-Based 3D Printing
18. Nguyen Vuong, Jie Cheah, Lao Junying, Huanyu Zhao et al. (2026-02)
    Experimental and Multi-Scale Modelling Investigation of Printable, Low-Cement Engineered Cementitious Composites with Different Polyethene Fiber Contents
19. Tripathi Avinaya, Maurya Ashutosh, Rajan Subramaniam, Neithalath Narayanan (2026-02)
    Finite-Element Modeling Framework for Mechanical Response of 3D-Printed Concrete:
    Elucidating Directional, Interface, and Fiber Effects
20. Neef Tobias, Butler Marko, Mechtcherine Viktor (2026-02)
    Methodology for Integrating Mineral-Impregnated Carbon Fibers as Reinforcement in Fine Filament 3D Concrete Printing
21. Si Wen, Khan Mehran, McNally Ciaran (2026-02)
    Designing Polypropylene Fiber Reinforcement for 3D Concrete Printing:
    Rheology Control, Thixotropic Recovery and Mechanical Performance
22. Tafur Ginette, Rivera Cristhofer, Torres Pablo (2026-02)
    Evaluation of Sustainable 3D Concrete with Partial Replacement of Fine Aggregate by PET and Addition of Coconut Fibers:
    Impact on Construction with the Use of 3D Gantry-Type Printers in Peru
23. Chen Xusheng, Jia Zijian, Bao Bingtong, Dong Enlai et al. (2026-01)
    Effect of Coarse Aggregate and Steel Fiber Interaction under Extrusion on the Performance of 3D-Printed Steel Fiber-Reinforced Concrete
24. Uddin Md, Sajib Mahabub, Arif Arifuggaman, Ye Junhong et al. (2026-01)
    From Mix to Structure:
    A Critical Review of 3D Printed Fiber Reinforced Concrete (3DP-FRC)
25. Feng Lei, Chen Nuo, Wen Xiaodong (2026-01)
    Influence of Process Parameters on Interlayer Interface Mechanical Properties of 3D Printing Fiber Reinforced Concrete
26. Mudi Charitha, Gupta Souradeep, Basithali E. (2026-01)
    Influence of Engineered Natural Fiber Reinforcement in 3D Printed Earth-Based Cementitious Composites:
    Fresh and Hardened Properties
27. Chen Guixiang, Zhang Xuanzheng, Wang Jun, Hu Kui et al. (2026-01)
    Anisotropy and Mechanical Enhancement of 3D-Printed Vitrified Microsphere Thermal Insulation Mortar Incorporating Basalt Fiber Under Different Printing Paths
28. Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2026-01)
    Improving Bond Performance of 3D-Printable Earth-Based Mortar Reinforced with Jute Fibers
29. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud (2026-01)
    Effect of Fly Ash, Basalt Fiber and Attapulgite Nanoclay on the Fresh Properties, Rheology and Shrinkage Behaviour of Printable Concrete
30. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2026-01)
    Enhancing Fiber Alignment and Tensile Properties of 3D-Printed Ultra-High Performance Strain-Hardening Cementitious Composites by Nozzle Channel Design
31. Aroso Francisca, Reis Rui, Brandão Filipe, Figueiredo Bruno et al. (2026-01)
    Assessing Orthotropic Mechanical Performance and Digital Twin of Robotic 3D Printed Cementitious Mortars with Fibers and Metal Reinforcements
32. Brandão Filipe, Dias José, Aroso Francisca, Reis Rui et al. (2026-01)
    Upcycling of Waste Fibers:
    Enhancing Structural Integrity in 3DCP Through Fiber Reinforcement
33. Huang Bo, Liu Chang, Sun Junbo, Wang Yufei et al. (2025-12)
    Optimized Synergy of Fiberglass Mesh and PP Fibers-Modified Structural Adhesive for Enhanced Mechanical and Microstructural Performance in 3D Printing Concrete
34. Eisazadeh Hamid, Chatroudi Narges, Alizadeh Roozbeh (2025-12)
    AI-Based Prediction and Numerical Analysis of Mechanical and Microstructural Parameters of Carbon Fiber Reinforced 3D Printed Composites
35. Huang Qunyi, Huang Qingyu, Yang Hong, Zhang Jiahang et al. (2025-12)
    Research on the Workability of 3D Printed Fiber-Reinforced Concrete Materials
36. Akgümüş Fatih, Şahin Hatice, İsafça Kaya Tuğçe, Mardani Ali (2025-12)
    Combined Effect of Recycled Tire Steel Fiber and Blast Furnace Slag on the Mechanical Performance of 3D Printable Concrete
37. Xiao Wei (2025-12)
    Research on the Mechanical and Durability Properties of Carbon Fiber Reinforced 3D Printed Concrete
38. Sando Mona, Alves Santos Sara, Worms Paul, Gurlo Aleksander et al. (2025-12)
    Evaluation of Continuous Epoxy-Impregnated Carbon Fiber Reinforcement in a 3D-Printable Geopolymer Composite
39. Knychalla Bruno, Wiesner Christian, Sonnleitner Patrick, Kowalczyk Magdalena et al. (2025-12)
    Integrated Fiber Forms:
    Functionally Integrated Slab Systems Through Additive Manufacturing and Natural Fiber Reinforcement
40. Cao Jing, Yang Xiaojie, Shi Yaming, Yang Yi et al. (2025-12)
    Numerical Analysis of Mechanical Properties of Steel Fiber Composite Cement Mortar Considering Non-Uniformity in 3D Printing.
41. Tong Zhongling, Guan Qingtao, Elabbasy Ahmed, Ateah Ali et al. (2025-12)
    Empowering 3D Printed Concrete:
    Discovering the Impact of Steel Fiber Reinforcement on Mechanical Performance
42. Wen Kuo-Wei, Su Yen-Fang, Mo Kim, Hung Chung-Chan (2025-12)
    Time-Dependent Rheology, Green Strength, and Buildability of 3D-Printed Ultra-High Performance Concrete Incorporating Various Fiber Types and Contents
43. Davar Saeed, Ma Zhanguo (2025-11)
    Improving the Mechanical Performance of 3D-Printed UHPFRC with Thermally Modified Carbon Fibers
44. Raza Ali, Tan Binglin, Jiajia Zhou, Umar Muhammad et al. (2025-11)
    Evaluation of Mechanical and Microstructural Properties of Sustainable 3D-Printed Engineered Cementitious Composites Incorporating Hybrid PE/PVA Fibers and Yellow River Sand
45. Oh Sangwoo, Lee Jinsuk, Oh Gyujong, Choi Seongcheol (2025-11)
    Effects of the Combined Incorporation of Superabsorbent Polymers and Polyvinyl Alcohol Fibers on Material Properties of 3D Printable Mortar:
    Rheology, Shrinkage, and Mechanical Behavior
46. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-11)
    Multi-Scale Analysis of 3D Printable High-Strength Engineered Cementitious Composite with Carbon and Polyethylene Fibers:
    Rheology, Printability and Hydration Kinetics in Structural Components
47. Hasan Md, Xu Jie, Uddin Md (2025-11)
    A Critical Review of 3D Printed Fiber-Based Geopolymer Concrete:
    Fresh Properties, Mechanical Performance, and Current Limitations
48. Sun Yan, Du Guoqiang, Mudasir Maryam (2025-11)
    Rheological Investigations of Fresh Fiber-Reinforced Cementitious Composites Using Hydrophobic / Hydrophilic UHMWPE Fibers for 3D Concrete Printing Evaluation
49. Khalid Lawand, Mermerdaş Kasım, Ekmen Şevin, Khidhir Bzeni Dillshad (2025-11)
    Optimization of Fresh and Hardened Properties of Fiber-Reinforced 3D Printed Geopolymer Composites Using Response Surface Methodology:
    A Data-Driven Approach Based on Prior Experimental Studies
50. Zhu Binrong, Liu Xuhua, Wei Yang, Pan Jinlong (2025-11)
    Predicting the Tensile Performance of 3D-Printed PE Fiber-Reinforced ECC Based on Micromechanics Model
51. Zeng Jun-Jie, Jiang Yuan, Yan Zitong, Sun Hou-Qi et al. (2025-11)
    3D Printing of Continuous Carbon Fiber-Reinforced Polymer Reinforcement for Concrete Columns
52. Sun Yuhang, Li Chuang, Liu Xiongfei, Wang Li et al. (2025-11)
    Enhancing Sulfate Resistance of Spray-Based 3D Printed Recycled Tunnel Slag Concrete Through Polypropylene Fiber Optimization
53. Liu Xiongfei, Wang Haonan, Chen Jinnan, Sun Yuhang et al. (2025-11)
    Fiber Orientation Control in Spray-Based 3D Printed Steel Fiber Reinforced Concrete
54. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-11)
    Examining the Multi-Scale Toughening Mechanisms and Mechanical Anisotropic Behavior of 3D Printed Concrete Reinforced with Calcium Sulfate Whiskers and Mixed Fibers
55. Chen Wenguang, Yu Jie, Ye Junhong, Yu Jiangtao et al. (2025-11)
    3D Printed High-Performance Fiber-Reinforced Cementitious Composites:
    Fresh, Mechanical, and Microstructural Properties
56. Janani Parthiban, Ganesh G. (2025-11)
    Synergistic Effects of Polypropylene Fibers on the Strength and Durability Properties of 3D Printed Concrete
57. Li Yeou-Fong, Lin Chih-Chieh, Syu Jin-Yuan, Huang Chih-Hong et al. (2025-10)
    Enhancing 3D-Printed Cement Mortar with Recycled PCB Glass Fibers:
    Printability, Mechanical Strength, and FEM-Based Structural Assessment
58. Garshasbi Sajad, Mousavi Seyed, Dehestani Mehdi, Nazarpour Hadi (2025-10)
    Sustainable Production of 3D Concrete Printing Using Agricultural Waste Fibers
59. Albostami Asad, Mohammad Malek, Ismael Bashar, Hamd Rwayda (2025-10)
    Optimized Strength Predictions for 3D Printed Fiber-Reinforced Concrete:
    Machine Learning-Driven Insights
60. Shang Yuqing, Yu Zheming, Ma Wei, Wei Jun et al. (2025-10)
    Research on 3D Printing Materials and Printing Parameters of Basalt Fiber Reinforced Concrete
61. Sedighi Saeed, Rahai Alireza, Moodi Faramarz (2025-10)
    Multi-Criteria Optimization for Sustainable Concrete Mix Considering the Synergistic Effect of Recycled Steel Fiber and LC3 Concrete
62. Ding Tao, Zhu Ruitao, Yu Kequan, Xiao Jianzhuang (2025-10)
    Direct Tensile Behavior of Three-Dimensional-Printable Steel Fiber-Reinforced Ultrahigh Performance Concrete
63. Akgümüş Fatih, Şahin Hatice, Mardani Ali (2025-10)
    Investigation of Waste Steel Fiber Usage Rate and Length Change on Some Fresh State Properties of 3D Printable Concrete Mixtures
64. Wang Huai, Li Xiulin, Gong Hao, Xu Jingjie et al. (2025-10)
    Thermal and Mechanical Properties of 3D-Printed Fiber-Reinforced Lightweight Concrete Based on Air Entrainment and Hollow Glass Microspheres
65. Varghese Renny, Rangel Bárbara, Maia Lino (2025-10)
    Strength, Structure, and Sustainability in 3D-Printed Concrete Using Different Types of Fiber Reinforcements
66. Ali Muhammad, Qian Hui, Umar Muhammad, Fenglin Liu et al. (2025-10)
    Rheological, Mechanical, and Self-Recovery Performance of 3D-Printed ECC Reinforced with Shape Memory Alloy Fibers
67. Delavar Mohammad, Aslani Farhad, Sercombe Tim (2025-10)
    Cracking Behaviour in 3D Concrete Printed Fiber-Reinforced Cementitious Composites:
    A Review
68. Lale Erol, Ayhan Bahar, Ahmed Ayesha, Irizarry Elmer et al. (2025-10)
    Computational Simulations Fresh-to-Solid Transition for Additive Manufacturing of Ultra-High-Performance Fiber Reinforced Concrete
69. Rudziewicz Magdalena, Maroszek Marcin, Hebda Marek (2025-09)
    Comparison of Porosity and Thermal Conductivity of Concrete and Alkali-Activated Hybrid Binders in 3D-Printed Fiber-Reinforced Foamed Composites
70. Philip Nivin, Jędrzejewska Agnieszka, Mathew Ashitta, Uthuppan Susan (2025-09)
    Steel Fiber Reinforcement for Improved Structural Performance and Durability of 3D Printed Mortar in Marine Environments
71. Sun Yan, Mudasir Maryam (2025-09)
    3D Printing Performance of Strain-Hardening Cementitious Composites with Different UHMWPE Fibers in Correlation with Rheology
72. Zhou Juanlan, Shi Xiangwen, Zheng Hongrun, Jin Ruoyu et al. (2025-09)
    Investigating the Effects of Hybrid PVA/BF Fibers in Low-Carbon 3D Printed Concrete with Recycled Aggregates:
    Rheology, Strength, and Anisotropy
73. Si Wen, Hopkins Ben, Khan Mehran, McNally Ciaran (2025-09)
    Towards Sustainable Mortar:
    Optimising Sika-Fiber Dosage in Ground Granulated Blast Furnace Slag and Silica Fume Blends for 3D Concrete Printing
74. Singh Amardeep, Yang Song, Wang Dianchao, Xiao Jianzhuang et al. (2025-09)
    Critical Threshold Fiber Content for Freeze-Thaw Resistance in 3D-Printed Concrete
75. Nasr Ahmed, Wang Jiyuan, Duan Zhenhua, Deng Qi et al. (2025-09)
    Assessing the Visibility and Impact of Recycled High-Density Polyethylene Fibers in 3D-Printed Cementitious Composites
76. Ding Tao, Zhu Ruitao, Huang Zhangshuo (2025-09)
    Experimental Study on the Steel Fiber Orientational Distribution of Extrusion-Based 3D-Printed Ultra High-Performance Concrete
77. Li Leo, Xiao Bofeng, Kou Shi-cong (2025-09)
    Influences of Fiber Length on the Printability and Strength of Glass Fiber-Reinforced 3D-Printed Mortar
78. Luo Surong, Jin Wenhao, Zhang Zhaorui, Zhang Kaijian (2025-09)
    Constitutive Relationship of 3D Printed Fiber Reinforced Recycled Sand Concrete Under Uniaxial Compression
79. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
    Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
    A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
80. Rahman S., Khair Sanjida, Shaikh Faiz, Sarker Prabir (2025-09)
    Decarbonized 3D Printed Concrete Incorporating Lithium Slag and PVA Fiber:
    Buildability, Mechanical, and Microstructural Insights
81. Zhang Yifan, Aslani Farhad (2025-08)
    Mechanical and Ultrasonic Pulse Velocity Performance of 3D Printed Rubberised Cementitious Composites Reinforced with PVA Fibers
82. Dong Enlai, Jia Zijian, Rao Suduan, Jia Lutao et al. (2025-08)
    Fiber Alignment Mechanism in 3D-Printed Ultra-High Performance Concrete Based on Fluid Dynamics Theory
83. Lu Qianyang, Mei Song, Ateah Ali, Alsubeai Ali et al. (2025-08)
    Investigating the Strength Performance of 3D Printed Fiber-Reinforced Concrete Using Applicable Predictive Models
84. Shilar Fatheali, Ganachari Sharanabasava, Osman N., Ramesh S. et al. (2025-08)
    Advancements in Fiber-Reinforced Geopolymer Along with 3D Printed and Nano Concrete in Sustainable Construction
85. Medeiros Fernanda, Anjos Marcos, Maia José, Dias Leonardo et al. (2025-08)
    Effect of Sisal Fibers on the Behavior of 3D-Printed Cementitious Mixtures Exposed to High Temperatures
86. Mani Aravindhraj, Sekar Muthu (2025-08)
    NDT Techniques for Evaluating Mechanical Properties in Green and Fiber-Reinforced 3D Printable Mixes
87. Xiahou Xiaer, Ding Xingyuan, Yu Ke-Ke, Lu Cong (2025-08)
    From Waste to Strength:
    Sustainable Valorization of Modified Recycled PET Fibers for Rheological Control and Performance Enhancement in 3D Printed Concrete
88. Panchal Priyanka, Choi Myoungsung (2025-07)
    A Review on Effect of Natural Fibers to Mitigate CO2 Footprint and Enhance Engineering Properties of 3D Printing Concrete
89. Ravichandran Darssni, Prem Prabhat, Bhaskara Gollapalli, Maheswaran Srinivasan et al. (2025-07)
    Time-Dependent Properties of 3D Printable Plain and Fibered High Strength Concrete Incorporating Copper Slag as an Alternate Fine Aggregate
90. Yousaf Arslan, Khan Shoukat, Koç Muammer (2025-07)
    Material, Process, and Design Optimization of Local Earthen Soil Reinforced with Natural Fiber Waste and Nanoclay for 3DP of Functional Structures
91. Ding Shengxuan, Li Jiren, Wang Mingqiang (2025-07)
    Study on Mechanical Properties of Composite Basalt Fiber 3D-Printed Concrete Based on 3D Meso-Structure
92. Ding Tao, Dong Haining, Sikora Paweł, Lin Guan (2025-07)
    3D Printed Concrete Reinforced with Flexible Fiber Reinforced Polymer Strips or Grids:
    Concept and Bond Tests
93. Yang Jie, Xu Ke, He Haijie (2025-07)
    Materials, Performance Studies, and Application Progress of Fiber-Reinforced 3D-Printed Concrete
94. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-06)
    Mix Design Optimization of 3D-Printed Cementitious Composites for Marine Applications:
    Impact of Binder Composition, Accelerated Carbonation, and PVA Fibers on Strength and Durability
95. Brandão Filipe, Figueiredo Bruno, Cruz Paulo (2025-06)
    Winding Fiber Thread for 3D Concrete Robotic Printing
96. Khodadadi Nima, Roghani Hossein, Caso Francisco, Kenawy El‐Sayed et al. (2025-06)
    Machine Learning Approach for the Flexural Strength of 3D‐Printed Fiber‐reinforced Concrete Based on the Meta‐heuristic Algorithm
97. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-06)
    Enhancing Interfacial Bonding and Pore Structure Optimization in 3D-Printed High-Strength ECC with Steel-PE Hybrid Fibers
98. Galeote Eduardo, Claramunt Josep, Hermida José, Fuente Albert (2025-06)
    Influence of Fibers and Iron Dust on the Electrical Conductivity of 3D-Printed Concrete Mixes
99. Alizamir Meysam, Kim Sungwon, Ikram Rana, Ahmed Kaywan et al. (2025-06)
    A Reliable Hybrid Extreme Learning Machine-Metaheuristic Framework for Enhanced Strength Prediction of 3D-Printed Fiber-Reinforced Concrete
100. Li Shuai, Liu Junli, Cheng Chi-Tsun, Xuan Hung et al. (2025-06)
     Design and Performance of 3D Printed Bouligand Steel Fiber-Reinforced Cementitious Composite Curved Beams
101. Pham Thi, Nguyen Thi, Huang Jie (2025-06)
     Experimental Study on Anisotropic Mechanical Properties of 3D Reinforced Concrete with Discrete Polyethylene Fibers
102. Dai Pengfei, Luo Zhenhua, Wang Yalun, Mbabazi Justin et al. (2025-06)
     Waste Plastic Fiber Reinforced Cementitious Cavity Structures Manufactured by Mortar Extrusion 3D Printing
103. Tinoco Matheus, Márquez Álvaro, Ramallo Laura, Barluenga Gonzalo et al. (2025-06)
     Fresh and Hardened Properties of Cellulose Fiber-Reinforced Mortars for 3D Printing in Construction
104. Ding Tao, Qu Changwei, Guo Dingming (2025-06)
     Thermal and Mechanical Properties of 3D Printed Functionally Graded Concrete:
     Utilizing Fibers and Recycled Aggregates as Gradient Components
105. Hopkins Ben, Si Wen, Khan Mehran, McNally Ciaran (2025-06)
     Recent Advancements in Polypropylene Fiber-Reinforced 3D-Printed Concrete:
     Insights into Mix Ratios, Testing Procedures, and Material Behaviour
106. Wang Junsong, Ye Haoran, Sun Yating, Zhang Zixin et al. (2025-05)
     Integration of 3D Printed Fiber Concrete and OpenSeesTO for Enhanced Structural Design
107. Rückrich Stefanie, Austern Guy, Denay Ofer, Seiwert Paul et al. (2025-05)
     3D-Printed Earth-Fiber Envelopes:
     Optimization of Thermal Performance and Industrial Applicability
108. Yamamoto Yujin, Kinomura Koji, Murata Satoshi, Asaue Hisafumi et al. (2025-05)
     Seismic Performance of RC Column Surrounded by 3D Printed Concrete Permanent Formwork with Short Fiber
109. Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2025-05)
     Flexural Performance of Glass Fiber Textile Reinforced 3D Printed Concrete
110. Irshidat Mohammad, Albeitjali Naeem, Amjad Umar, Alnuaimi Hamad et al. (2025-05)
     From Waste to Strength:
     Recycled Steel Fibers for Sustainable 3D Printing of Cementitious Composites
111. Asif Usama (2025-05)
     Comparative Analysis of Evolutionary Computational Methods for Predicting Mechanical Properties of Fiber-Reinforced 3D Printed Concrete
112. Zahabizadeh Behzad, Pereira João, Pereira Eduardo, Cunha Vítor (2025-05)
     Self-Healing Assessment of Fiber Reinforced Cementitious Mortars Developed for 3D Concrete Printing:
     Recovery of Mechanical Performance and Self-Sealing Capability
113. Gantner Stefan, Rennen Philipp, Amiri Fatemeh, Rothe Tom et al. (2025-05)
     Robotic Frame Winding:
     Prefabricated Fiber Structures as Formwork and Reinforcement for Digitally Fabricated Shell-Like Concrete Elements
114. Yang Guojun, Weng Yiwei, Tian Jiefu, Yang Zhenjun (2025-05)
     3D Printing Towards Cost-Effective Design of Composite UHPFRC Beams:
     Effects of Fiber Distribution and Orientation on Flexural Performances and Failure Mode Transition
115. Dabbaghisouraki Farshad, Tanhadoust Amin, Nehdi Moncef (2025-04)
     Fiber Reinforcement Strategies in 3D Concrete Printing:
     Addressing Challenges and Identifying Research Gaps
116. Si Qi, Zhang Wenna, Pan Zhihong, Zheng Jianqiang et al. (2025-04)
     Study on the Mechanical and Durability Properties of 3D-Printed Bamboo Fiber-Reinforced Concrete
117. Campos Guilherme, Lunelli Pietro, Moraes Elisângela, Souza Marcelo et al. (2025-04)
     Optimization of Clay-Based Ceramic Mixtures with Sugarcane Bagasse Fiber for 3D Printing
118. Zhang Qiuju, Li Yujia, Huang Yuefan, Li Yangbo et al. (2025-04)
     Utilizing 3D Printing and Distributed Optic Fiber to Achieve Temperature-Sensitive Concrete
119. Sørensen Jesper, Stang Henrik (2025-04)
     Experimental Investigation of the Fatigue Behavior of 3D Printed Steel Fiber Reinforced Concrete
120. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
     Effect of Nozzle Stand-Off Distance, Printing Interval, and Inclusion of Glass Fiber Mesh Reinforcement in 3D Printed Concrete
121. Liu Qiong, Wang Qiming, Sun Chang, Singh Amardeep et al. (2025-04)
     Compressive Performance and Damage Evolution of Concrete Short Columns with Shell-Filling Structure Confined by Continuous Fiber Reinforced 3D Printed Mortar
122. Yassin Ahmed, Hafez Mohamed, Aboelhassan Mohamed (2025-04)
     Experimental and Numerical Investigation on the Effect of Different Types of Synthetic Fibers on the Flexure Behavior and Mechanical Properties of 3D Cementitious Composite Printing Provided with Cement CEM II/A-P
123. Ravichandran Darssni, Prem Prabhat, Giridhar Greeshma, Bhaskara Gollapalli et al. (2025-04)
     Time-Dependent Properties of 3D-Printed UHPC with Silica Sand, Copper Slag, and Fibers
124. Liu Han, Laflamme Simon, Cardinali Amelia, Lyu Ping et al. (2025-03)
     Enhancing 3D-Printed Cementitious Composites with Recycled Carbon Fibers from Wind Turbine Blades
125. Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
     The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
126. Şahin Hatice, Kaya Yahya, Akgümüş Fatih, Mardani Naz et al. (2025-03)
     Degradation of Mechanical Properties of 3D Fiber Reinforced Printed Concrete Mixtures Exposed to Elevated Temperatures
127. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Deng Qi et al. (2025-02)
     Fresh Properties and Rheological Behavior of 3D-Printed Cementitious Composites Incorporating Recycled PVC and Nylon Fibers:
     An Experimental Approach
128. Bakhshi Amir, Zafar Muhammad, Hojati Maryam (2025-02)
     A Study on Achieving High Tensile Ductility in 3D-Printable Engineered Cementitious Composites Reinforced with 8mm Fibers
129. Mortada Youssef, Hammoud Ahmad, Masoud Laith, Wyrzykowski Mateusz et al. (2025-02)
     3D Printable Ca(OH)2-Based Geopolymer Concrete with Steel Fiber Reinforcement
130. Shen Qiang, Sun Dongpu, Lu Chenyu, Zhang Zhigang et al. (2025-02)
     Fresh and Anisotropic-Mechanical Properties of Polyoxymethylene Fibers Reinforced 3D Printable Cementitious Composites
131. Zavaleta Diana, Quispe Axcel, Rojas Omar, Silva Guido et al. (2025-02)
     3D-Printing of a Basic Housing Unit Prototype Using Earthen-Based Matrices Stabilized with Rice Husk Fibers
132. Xia Zhenjiang, Geng Jian, Zhou Zhijie, Liu Genjin (2025-01)
     Comparative Analysis of Polypropylene, Basalt, and Steel Fibers in 3D Printed Concrete:
     Effects on Flowability, Printabiliy, Rheology, and Mechanical Performance
133. Liu Xinhao, Hu Jiajun, Guo Xiaolu (2025-01)
     Improved Interlayer-Bonding of 3D Printed Fiber-Reinforced Geopolymer by Healing-Agents:
     Properties, Mechanism, and Environmental Impacts
134. Sun Junbo, Wang Yufei, Yang Xin, Wang Haihong et al. (2025-01)
     Red Mud Utilization in Fiber-Reinforced 3D Printed Concrete:
     Mechanical Properties and Environmental Impact Analysis
135. Chen Meng, Li Jiahui, Zhang Tong, Zhang Mingzhong (2025-01)
     3D Printability of Recycled Steel-Fiber-Reinforced Ultra-High-Performance Concrete
136. Fernand Muhirwa, Yang Zhenjun (2025-01)
     Structural and Microstructural Behavior of Novel 3DP-UHPFRC Beam with Discrete Steel-Fibers and Steel-FRP Composite Bar
137. Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2025-01)
     Assessment of the Suitability of Carbon Long Fibers as Reinforcement for Additively Manufactured Components
138. Vargas Armando, Robayo-Salazar Rafael, Gutiérrez Ruby (2024-12)
     Effects of Incorporating Fine Aggregates and Polypropylene-Micro-Fibers on the Cracking-Control of 3D Printed Cementitious Mixtures
139. Li Yeou-Fong, Liang Yu-Fang, Syu Jin-Yuan, Huang Chi-Hong et al. (2024-12)
     Static and Dynamic Mechanical Characteristics of 3D Printed Anisotropic Basalt Fiber-Reinforced Cement Mortar
140. Huang Junxiang, Peng Zeqin, Tan Xianzhong, Gong Guofang et al. (2024-12)
     Mechanism Analysis of the Magnetic Field-Assisted 3D Printed Steel-Fiber-Reinforced Concrete
141. Neef Tobias, Kalthoff Matthias, Müller Steffen, Cruz Cynthia et al. (2024-12)
     Mineral-Impregnated Carbon-Fibers-Reinforcement for Concrete Elements Manufactured by Extrusion
142. Li Shuai, Khieu Hai, Black Jay, Nguyen Hung-Xuan et al. (2024-12)
     Two-Scale 3D Printed Steel-Fiber-Reinforcements-Strategy for Concrete Structures
143. Alarrak Rashed, Brand Alexander (2024-12)
     Mechanical Performance of Extruded Functionally-Graded Fiber-Reinforced Mortar with Targeted Fiber-Injection
144. Zhao Shuai, Zhou Ran, Luo Mingming, Liu Jianfei et al. (2024-12)
     Distributed Fiber Optic Sensing System for Vibration Monitoring of 3D Printed Bridges
145. Li Ben, Li Kaihang, Lyu Xuetao, Zhao Canhao et al. (2024-12)
     Microscopic Mechanism and Predicting Calculation on Mechanical Properties of Basalt-Fiber-Modified 3D Printing Cement-Based Materials
146. Huang Bo, Ge Yutian, Wang Xiangyu, Wang Yufei et al. (2024-11)
     Recycled Ceramic-Brick-Powder Utilization in Fiber-Reinforced 3D Printing Concrete:
     An Eco-Friendly Substitute to Conventional Fine Aggregates
147. Şahin Hatice, Akarsu Özenç Aliye, Saka Dinç Zaide, Mardani Ali et al. (2024-11)
     Investigation of Fresh and Hardened Properties of 3D Printable Concrete Containing Ozone-Modified Carbon-Fiber
148. Rasel Risul, Hossain Md, Zubayer Md, Zhang Chaoqun (2024-11)
     Exploring the Fresh and Rheology Properties of 3D Printed Concrete with Fiber-Reinforced Composites:
     A Novel Approach Using Machine Learning Techniques
149. Luo Surong, Jin Wenhao, Wu Weihong, Zhang Kaijian (2024-11)
     Rheological and Mechanical Properties of Polyformaldehyde-Fiber-Reinforced 3D Printed High-Strength Concrete with the Addition of Fly-Ash
150. Costalonga Vanessa, Dahy Hanaa (2024-11)
     From Filament to Structure:
     3D Printing of Natural Fiber Filaments for Architecture
151. Tish Daniel, Gan Amelia, Cabral Sophia, Bechthold Martin (2024-11)
     Toward a Digital Vernacular:
     Framework for Localized Biocomposite 3D-Printing with Natural Fibers
152. Rothe Tom, Gantner Stefan, Hack Norman, Hühne Christian (2024-11)
     Characterisation of the Alkaline-Resistance of Fiber-Reinforcement Strands Produced in a Dynamic Fiber Winding Process for 3D Concrete Printing
153. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Yang Min et al. (2024-11)
     Enhancing Mechanical Properties of 3D Printed Cementitious Composites Utilizing Hybrid Recycled PP and PET-Fibers
154. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
     Development of Ultra-Ductile Strain-Hardening 3D Printed Concrete Composite Utilizing Critical Fiber Volume and Coarse Aggregate
155. Arif Muhammad, Jan Faizullah, Rezzoug Aïssa, Afridi Muhammad et al. (2024-11)
     Data-Driven Models for Predicting Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Interpretable Machine Learning Algorithms
156. Mandala Venugopal, Khan Mohd (2024-11)
     Experimental Investigations on Layered Functionally Graded Fiber-Reinforced Concrete
157. Zeng Jun-Jie, Hu Xianwen, Sun Hou-Qi, Liu Yue et al. (2024-10)
     Triaxial Compressive Behavior of 3D Printed PE-Fiber-Reinforced Ultra-High-Performance Concrete
158. Liu Bing, Cheng Xiao-Ming, Wang Lian-Gang, Qian Kai (2024-10)
     Compressive Performance of PVA Fiber-Reinforced 3D Concrete Printing Permanent Formwork Composite Columns Reinforced with BFRP-Bars
159. Yu Ke-Ke, Zhao Tai-Qi, Lou Qi-Ling, Ping Yang (2024-10)
     Recycled PET Fibers with Dopamine Surface Modification for Enhanced Inter-Layer Adhesion in 3D Printed Concrete
160. Ding Yao, Ou Xingjian, Qi Hongtuo, Xiong Gang et al. (2024-10)
     Inter-Layer Bonding Performance of 3D Printed Engineered Cementitious Composites:
     Rheological Regulation and Fiber Hybridization
161. Varela Hugo, Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo et al. (2024-10)
     3D Printable Cement-Based Composites Reinforced with Sisal-Fibers:
     Rheology, Printability and Hardened Properties
162. Dong Enlai, Jia Zijian, Jia Lutao, Rao Suduan et al. (2024-10)
     Modeling Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete Based on Stereology-Theory
163. Althoey Fadi, Zaid Osama, Ahmed Bilal, Elhadi Khaled (2024-10)
     Impact of Double Hooked Steel-Fibers and Nano-Kaolin-Clay on Fresh Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete
164. Gyawali Biva, Haghnazar Ramtin, Akula Pavan, Alba Kamran et al. (2024-10)
     A Review on 3D Printing with Clay and Sawdust/Natural Fibers:
     Printability, Rheology, Properties, and Applications
165. Carcassi Olga, Akemah Tashania, Alon Lola (2024-09)
     3D Printed Lightweight Earth Fiber:
     From Tiles to Tessellations
166. Ma Wei, Wang Guosheng, Zhou Yaya, Xu Qinghu et al. (2024-09)
     Polyacrylonitrile-Fiber-Reinforced 3D Printed Concrete:
     Effects of Fiber Length and Content
167. Shahib Al Bari M., Ekaputri Januarti (2024-09)
     The Effect of Fiber on the Green Strength and Buildability of High-Strength 3D Printing Concrete
168. Aldabergenova Gaziza, Jexembayeva Assel, Konkanov Marat, Kirgizbayev Akpan et al. (2024-09)
     The Efficient Waste-Based Fine-Grained Fiber Concretes for 3D Printing
169. Varela Hugo, Barluenga Gonzalo, Sonebi Mohammed (2024-09)
     Evaluation of Basalt-Fibers and Nano-Clays to Enhance Extrudability and Buildability of 3D Printing Mortars
170. Han Kang, Gu Fei, Yang Huashan, Tian Xinchen et al. (2024-09)
     PVA-Fiber-Reinforced Red Mud-Based Geopolymer for 3D Printing:
     Printability, Mechanical Properties and Microanalysis
171. Reißig Silvia, Herdan Annika, Mechtcherine Viktor (2024-09)
     Rheological Behavior of Steel-Fiber-Reinforced Concrete in the Context of Additive Manufacturing
172. Neef Tobias, Mechtcherine Viktor (2024-09)
     Continuous Fiber-Reinforcement for Extrusion-Based 3D Concrete Printing
173. Ogura Hiroki, Hara Koichiro, Yamamoto Shinya, Abe Hiroyuki (2024-09)
     Flexural Performance of Fiber-Reinforced 3D Printed Concrete Beams with Axial Rebar
174. Nikravan Ata, Aydin Tolga, Özyurt Nilüfer, Bundur Zeynep (2024-09)
     Enhancing the Performance of 3D Printed Fiber-Reinforced Mortar:
     Synergistic Effects of Clays and Bacterial Cells as Viscosity-Modifying-Agents
175. Rider Benjamin, Kurtis K., Stewart L. (2024-09)
     Quantification of Porosity and Sorptivity in Fiber-Reinforced 3D Printed Mortar:
     Connecting Material-Composition and Structural Performance
176. Nana W., Baz Bilal, Blachier Christian, Peraud Mickaël et al. (2024-09)
     Mechanical Performance of 3D Printed Fiber-Reinforced Concrete
177. Tasaki Haruto, Asakawa Tomoya, Kobayashi Noriyuki, Nishiwaki Tomoya et al. (2024-09)
     A Direction-Independent Reinforcement by Combination of Fiber-Reinforced Cementitious Composite and Automated Pin Insertion
178. Dias José, Brandão Filipe, Figueiredo Bruno, Cruz Paulo (2024-09)
     The Potential of Natural Fiber-Reinforcement in 3D Printed Concrete:
     A Review
179. Valera Hugo, Pimentel Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo et al. (2024-09)
     Rheological and 3D Printing-Assessment of Sisal-Fiber Mortar for Architectural Applications
180. Zat Tuani, Schmitt Duarte Ester, Webber Jaine, Matos Paulo et al. (2024-09)
     Comparison Between Yield-Stress-Measurements for Fiber-Reinforced 3D Concrete Printing
181. Liu Bing, Chen Yuwen, Li Dongdong, Wang Yang et al. (2024-09)
     Study on the Fracture Behavior and Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete
182. Hou Shaodan, Wu Wenbo, Duan Zhenhua, Zhou Shuai et al. (2024-09)
     Rheology of Fiber-Reinforced Mortar for 3D Printing Construction:
     Effect of Recycled Hybrid-Powder and Polyethylene-Fiber
183. Amiri Fatemeh, Baghdadi Abtin, Kwon Hyunchul (2024-08)
     New Reinforcement Approach for Freeform Concrete Components Through Carbon Fiber 3D Printing
184. Bono Victor, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2024-08)
     Design, Structural Optimization and Fabrication of Concrete Shell Through Fiber-Reinforced 3D Printing
185. Carcassi Olga, Maierdan Yierfan, Kawashima Shiho, Alon Lola (2024-08)
     Recyclability of Earth-Fiber Materials for 3D Printing
186. Rennen Philipp, Gantner Stefan, Rothe Tom, Baz Bilal et al. (2024-08)
     Structural Evaluation of Shotcrete 3D Printing and Robotic Fiber Winding for Thin-Shell Elements
187. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-08)
     Time-Dependent Behavior of 3D Printed Fiber-Reinforced Limestone-Calcined-Clay-Cement Concrete Under Sustained Loadings
188. Fernand Muhirwa, Li Yaqi, Qian Qiwei, Chi Yin et al. (2024-08)
     Effects of Coarse Aggregates on 3D Printability and Mechanical Properties of Ultra-High-Performance Fiber-Reinforced Concrete
189. Ding Yao, Liu Jiepeng, Ou Xingjian, Nishiwaki Tomoya et al. (2024-08)
     3D Printing Hybrid-Fiber-Reinforced Engineered Cementitious Composites:
     Feasibility in Long-Open-Time Applications
190. Rudziewicz Magdalena, Maroszek Marcin, Setlak (nee Pławecka) Kinga, Góra Mateusz et al. (2024-08)
     Optimization of Foams-Polypropylene Fiber-Reinforced Concrete Mixtures Dedicated for 3D Printing
191. Yang Rijiao, Xu Chengji, Lan Yan, Qiu Yue et al. (2024-08)
     Near Pixel-Level Characterisation of Micro-Fibers in 3D Printed Cementitious Composites and Migration Mechanisms Using a Novel Iterative Method
192. Nguyen Vuong, Tran Jonathan, San Ha Ngoc, Xie Yi et al. (2024-08)
     Blast-Resistance of 3D Printed Bouligand Concrete Panels Reinforced with Steel-Fibers:
     Numerical Investigations
193. Şahin Hatice, Akgümüş Fatih, Mardani Ali (2024-08)
     Mechanical and Rheological Properties of Fiber‐Reinforced 3D Printable Concrete in Terms of Fiber Content and Aspect Ratio
194. Li Xiaoteng, Newlands Moray, Jones Rod (2024-08)
     Performance of a Multi-Layer Aligned Steel-Fiber-Reinforced Concrete Beam:
     A Preliminary Investigation Towards 3D Printing
195. Alonso-Cañon Sara, Blanco-Fernandez Elena, Castro-Fresno Daniel, Yoris-Nobile Adrian et al. (2024-08)
     Comparison of Reinforcement-Fibers in 3D Printing Mortars Using Multi-Criteria Analysis
196. Xu Wen, Jiang Dengjie, Zhao Qian, Wang Linbing (2024-08)
     Study on Printability of 3D Printing Carbon-Fiber-Reinforced Eco-Friendly Concrete:
     Characterized by Fluidity and Consistency
197. Lyu Xin, Elchalakani Mohamed, Wang Xiangyu, Sun Junbo et al. (2024-07)
     Mechanical Performance and Anisotropic Analysis of Rubberised 3D Printed Concrete Incorporating PP-Fiber
198. Kinomura Koji, Zhang Wenbo, Kawamura Keisuke (2024-07)
     Structural Performance of a Large Column with an Outer Shell Formed by Short-Fiber-Reinforced Mortar-Extrusion
199. Shin Eun, Carcassi Olga, Maierdan Yierfan, Kawashima Shiho et al. (2024-07)
     Developing 3D Printed Natural Fiber-Rich Earth Materials in Construction
200. Sariyev Bakytzhan, Konysbekov Alisher, Jexembayeva Assel, Konkanov Marat (2024-07)
     A Comparative Study of the Rheological Properties of a Fly-Ash-Based Geopolymer Reinforced with PP-Fiber for 3D Printing:
     An Experimental and Numerical Approach
201. Rajeev Pathmanathan, Ramesh Akilesh, Navaratnam Satheeskumar, Sanjayan Jay (2024-07)
     Using Fiber Recovered from Face Mask Waste to Improve Printability in 3D Concrete Printing
202. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
     Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
203. Shoaei Parham, Gallantree-Smith Harrison, Martínez Pacheco Victor, Pamies Ramón et al. (2024-06)
     Comparative Analysis of 3D Printing of Portland Cement Mortars with Hydroxypropyl-Methylcellulose and Micro-Fibrillated Cellulose as Viscosity-Modifying-Agents
204. Masoud Laith, Hammoud Ahmad, Mortada Youssef, Masad Eyad (2024-06)
     Rheological, Mechanical, and Microscopic Properties of Polypropylene-Fiber-Reinforced Geopolymer Concrete for Additive Manufacturing
205. Wang Changqing, Du Zicheng, Zhang Yu, Ma Zhiming (2024-06)
     Elaborating the 3D Microstructural Characteristics and Strength Softening Mechanical Mechanism of Fiber-Reinforced Recycled Aggregate Concrete
206. Zhi Peng, Wu Yuching, Bai Meiyan (2024-06)
     Determining the Effect of Geometric and Dynamic Properties of Screws on Fiber-Orientation During FRC 3D Printing Based on Discrete Element Simulation
207. Li Haodao, Wei Jingjie, Khayat Kamal (2024-06)
     3D Printing of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials:
     From Mixture Design to Printability Evaluation
208. Luo Surong, Li Wenqiang, Wang Dehui (2024-05)
     Study on Bending Performance of 3D Printed PVA-Fiber-Reinforced Cement-Based Material
209. Shoaei Parham, Kjøniksen Anna-Lena, Pamies Ramón, Pilehvar Shima (2024-05)
     Characterization of 3D Printable Geopolymer Mortars:
     Effect of Binder Composition and Basalt-Fiber-Reinforcement
210. Qiu Minghong, Qian Ye, Dai Jian-Guo (2024-05)
     Enhancing the Flexural Performance of Concrete Beams with 3D Printed UHP-SHCC Permanent Formwork via Graded Fiber Volume Fraction
211. Zhou Boyu, Zhang Mo, Ma Guowei (2024-05)
     An Experimental Study on 3D Printed Concrete Reinforced with Fibers Recycled from Wind Turbine Blades
212. Liu Han, Laflamme Simon, Alessandro Antonella, Ubertini Filippo (2024-05)
     3D Printed Self-Sensing Cementitious Composites Using Graphite and Carbon-Micro-Fibers
213. Mu Ru, Chen Jiao, Qing Longbang, Fan Chunhao et al. (2024-05)
     Properties of a Steel-Fiber-Reinforced Cementitious Composite Stool with Digitally Distributed Steel-Fibers
214. Chen Anguo, Dai Pengfei, Lyu Qifeng (2024-05)
     Effect of Alkalized Straw-Fibers on the Properties of Three Dimensional Printed Cementitious Composite
215. Boddepalli Uday, Gandhi Indu, Panda Biranchi (2024-05)
     Synergistic Effect of Fly-Ash and Polyvinyl-Alcohol-Fibers in Improving Stability, Rheology, and Mechanical Properties of 3D Printable Foam-Concrete
216. Bodur Burak, Mecit Işık Muhammet, Benli Ahmet, Bayrak Barış et al. (2024-05)
     Durability of Green Rubberized 3D Printed Lightweight Cement Composites Reinforced with Micro-Attapulgite and Micro-Steel-Fibers:
     Printability and Environmental Perspective
217. Yang Yekai, Lu Pengyuan, Liu Zhongxian, Dong Liang et al. (2024-04)
     Effect of Steel-Fiber with Different Orientations on Mechanical Properties of 3D Printed Steel-Fiber-Reinforced Concrete:
     Meso-Scale Finite-Element-Analysis
218. Uddin Md, Ye Junhong, Haque M., Yu Kequan et al. (2024-04)
     A Novel Compressive Strength Estimation Approach for 3D Printed Fiber-Reinforced Concrete:
     Integrating Machine Learning and Gene Expression Programming
219. Tripathi Avinaya, Nair Sooraj, Chauhan Harshitsinh, Neithalath Narayanan (2024-04)
     Print Geometry Alterations and Layer-Staggering to Enhance Mechanical Properties of Plain and Fiber-Reinforced Three-Dimensional-Printed Concrete
220. Lu Yue, Xiao Jianzhuang, Li Yan (2024-03)
     3D Printing Recycled Concrete Incorporating Plant-Fibers:
     A Comprehensive Review
221. Carcassi Olga, Maierdan Yierfan, Akemah Tashania, Kawashima Shiho et al. (2024-03)
     Maximizing Fiber-Content in 3D Printed Earth Materials:
     Printability, Mechanical, Thermal and Environmental Assessments
222. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
     Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
223. Pan Jinlong, Ping Pengxin, Ding Boyin, Zhu Binrong et al. (2024-03)
     Impact Behavior of 3D Printed Fiber-Reinforced Cementitious Composite Beams
224. Chen Mingxu, Xu Jiabin, Yuan Lianwang, Zhao Piqi et al. (2024-03)
     Use of Creep and Recovery-Protocol to Assess the Printability of Fiber-Reinforced 3D Printed White-Portland-Cement Composites
225. Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-03)
     Optimization of Fiber-Reinforced Lightweight Rubber-Concrete Mix-Design for 3D Printing
226. Liu Xinhao, Hu Jiajun, Guo Xiaolu (2024-03)
     Printability and Inter-Layer Bonding Property of 3D Printed Fiber-Reinforced Geopolymer
227. Shahzad Qamar, Abbas Nadeem, Akbar Muhammad, Sabi Ehab et al. (2024-03)
     Influence of Print-Speed and Nozzle-Diameter on the Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete
228. Neef Tobias, Müller Steffen, Mechtcherine Viktor (2024-03)
     Integrating Continuous Mineral-Impregnated Carbon-Fibers into Digital Fabrication with Concrete
229. Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
     Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete
230. Ziada Mahmoud, Tanyildizi Harun, Seloglu Maksut, Coskun Ahmet (2024-02)
     Bacteria-Based Crack-Healing of 3D Printed PVA-Fiber-Reinforced Geopolymer Mortars
231. Şahin Hatice, Mardani Ali, Beytekin Hatice (2024-02)
     Effect of Silica-Fume Utilization on Structural Build-Up, Mechanical and Dimensional Stability Performance of Fiber-Reinforced 3D Printable Concrete
232. Zhang Hongmei, Hu Fan, Duan Yuanfeng, Liao Jian et al. (2024-02)
     Mechanical Properties and Micro-Structure of Highly Flowable Geopolymer Composites with Low-Content Polyvinyl-Alcohol-Fiber
233. Tang Weichen, Sun Junbo, Wang Yufei, Chen Zhaohui et al. (2024-02)
     Electromagnetic Absorption Properties of 3D Printed Fiber-Oriented Composites Under Different Paths
234. Nguyen Vuong, Tran Jonathan, Liu Junli, Tran Mien et al. (2024-02)
     Extended Finite Element Multi-Scale Modelling for Crack Propagation in 3D Printed Fiber-Reinforced Concrete
235. Li Weihong, Chen Xuhao, Wang Yaoyu, Wan Detian et al. (2024-02)
     Effect of Embedded Filament Fibers on Mechanical Properties of 3D Printing Cement-Based Materials
236. Raut Jayant, Pimpalshende Anjusha, Chandak Mayuri, Patil Tejas et al. (2024-01)
     A Novel Multi-Method Framework for 3D Printed Fiber-Reinforced Polymer Concrete Utilizing Advance Additive Manufacturing Techniques
237. Pi Yilin, Lu Cong, Yao Yiming, Li Baoshan (2024-01)
     A Rheological-Based Printability-Assessment Method for 3D Printing Engineered Cementitious Composites Considering Fiber-Dispersion
238. Dai Pengfei, Lyu Qifeng, Zong Meirong, Zhu Pinghua (2024-01)
     Effect of Waste-Plastic-Fibers on the Printability and Mechanical Properties of 3D Printed Cement Mortar
239. Slavcheva Galina, Artamonova Olga, Kotova Кristina, Shvedova Mariia et al. (2023-12)
     Pull-Out Behavior of Steel- and Carbon-Fibers in 3D Printable Cement Matrices of Various Compositions
240. Pham Thi, Trinh Duy, Do Trong, Huang Jie (2023-12)
     Flexural Behavior of Printed Concrete Wide Beams with Dispersed Fibers-Reinforced
241. Li Haodao, Addai-NImoh Alfred, Kreiger Eric, Khayat Kamal (2023-12)
     Methodology to Design Eco-Friendly Fiber-Reinforced Concrete for 3D Printing
242. Alyami Mana, Khan Majid, Javed Muhammad, Ali Mujahid et al. (2023-12)
     Application of Metaheuristic Optimization Algorithms in Predicting the Compressive Strength of 3D Printed Fiber-Reinforced Concrete
243. Wang Li, Wang Fucheng, Li Rong, Wang Qiao (2023-12)
     Interfacial Constitutive Model of 3D Printed Fiber-Reinforced Concrete Composites and Its Experimental Validation
244. Li Yeou-Fong, Tsai Pei-Jen, Syu Jin-Yuan, Lok Man-Hoi et al. (2023-12)
     Mechanical Properties of 3D Printed Carbon Fiber-Reinforced Cement Mortar
245. Warsi Syed, Panda Biranchi, Biswas Pankaj (2023-12)
     Exploring Fiber Addition Methods and Mechanical Properties of Fiber-Reinforced 3D Printed Concrete:
     A Review
246. Reißig Silvia, Bedolla Carolin, Meyer Tamara, Mechtcherine Viktor (2023-12)
     Rheological Behavior of Fiber-Reinforced LC3 Fine-Grained Concrete in the Context of Additive Manufacturing
247. Pazols Maximiliano, Raspall Félix (2023-12)
     Terra Fibrosum:
     Continuous Fibers Reinforcement System for Robotized 3D Printing with Earth for Architecture
248. Alyami Mana, Khan Majid, Fawad Muhammad, Nawahz R. et al. (2023-11)
     Predictive Modeling for Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Machine Learning Algorithms
249. Dams Barrie, Shepherd Paul, Ball Richard (2023-11)
     Development and Performance Evaluation of Fibrous Pseudoplastic Quaternary Cement Systems for Aerial Additive Manufacturing
250. Zavaleta Diana, Ñañez Robert, Silva Guido, Ruiz Gaby et al. (2023-11)
     Additive Construction Using Enhanced Earthen-Based Composites:
     Improvement of the Mechanical Strength and Water Durability Using Chitosan and Agave-Fibers
251. Wang Yu, Rodriguez Fabian, Olek Jan, Zavattieri Pablo et al. (2023-11)
     Influence of Type of Fibers on Fresh and Hardened Properties of Three-Dimensional-Printed Cementitious Mortars
252. Ungureanu Dragoș, Onuțu Cătălin, Țăranu Nicolae, Vornicu Nicoleta et al. (2023-11)
     Microstructure and Mechanical Properties of Cost-Efficient 3D Printed Concrete Reinforced with Polypropylene Fibers
253. Lyu Qifeng, Dai Pengfei, Chen Anguo (2023-10)
     Mechanical Strengths and Optical Properties of Translucent Concrete Manufactured by Mortar-Extrusion 3D Printing with Polymethyl-Methacrylate Fibers
254. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-10)
     Comparative Studies of LC³- and Fly-Ash-Based Blended Binders in Fiber-Reinforced Printed Concrete:
     Rheological and Quasi-Static Mechanical Characteristics
255. Zhou Yi, Althoey Fadi, Alotaibi Badr, Gamil Yaser et al. (2023-10)
     An Overview of Recent Advancements in Fiber-Reinforced 3D Printing Concrete
256. Yang Wenwei, Wang Li, Hu Yuanyuan, Sanjayan Jay et al. (2023-10)
     An Integrated Topology-Optimization Method Including Manufacturing-Constraints for 3D Printed Fiber-Reinforced Concrete Structures
257. Caron Jean-François, Ducoulombier Nicolas, Demont Léo, Bono Victor et al. (2023-10)
     3D Printing of Continuous-Fibers Cementitious Composites:
     Anisotropic 3D Mortar
258. Rothe Tom, Hühne Christian, Gantner Stefan, Hack Norman (2023-10)
     Dynamic Winding Process of Individualized Fiber-Reinforcement Structures for Additive Manufacturing in Construction
259. Auer Daniel, Bos Freek, Olabi Mohammad, Fischer Oliver (2023-10)
     Fiber-Reinforcement of 3D Printed Concrete by Material-Extrusion-Tool-Paths Aligned to Principal Stress-Trajectories
260. Singh Amardeep, Wang Yufei, Zhou Yiyi, Sun Junbo et al. (2023-10)
     Utilization of Antimony-Tailings in Fiber-Reinforced 3D Printed Concrete:
     A Sustainable Approach for Construction Materials
261. Alarrak Rashed, Jeon Byeonguk, Brand Alexander (2023-09)
     Flexural Toughness of Extruded Fiber-Reinforced Mortar with Preferentially Aligned Fibers
262. Ramamurthy Vignesh, Prem Prabhat, Ingle Vaibhav, Giridhar Greeshma (2023-09)
     Fracture Characterization of 3D Printed Ultra-High-Performance Fiber Concrete Beams Using Acoustic Emission
263. Li Mingyang, Zhang Dong, Wong Teck, Tan Ming et al. (2023-09)
     Modeling and Experimental Investigation of Fiber Orientation in Cast and 3D Printed Cementitious Composites
264. Li Leo, Xiao Bofeng, Cheng Cong-Mi, Xie Hui-Zhu et al. (2023-09)
     Adding Glass-Fibers to 3D Printable Mortar:
     Effects on Printability and Material-Anisotropy
265. Sukontasukkul Piti, Khomkum Sila, Maho Buchit, Fujikake Kazunori (2023-09)
     Printability and Shape Stability of Cement Mortar Incorporating Low Volume of Micro-Polypropylene Fiber for 3D Printing Application
266. Ahmadi Khatereh, Mousavi Seyed, Dehestani Mehdi (2023-09)
     Influence of Nano-Coated Micro-Steel-Fibers on Mechanical and Self-Healing Properties of 3D Printable Concrete Using Graphene-Oxide and Polyvinyl-Alcohol
267. Alarrak Rashed, Jeon Byeonguk, Brand Alexander (2023-08)
     Fracture Properties of Extruded Fiber-Reinforced Mortar with Preferentially Aligned Fibers
268. Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2023-08)
     Advanced Measurement Techniques for Plastic Shrinkage and Cracking in 3D Printed Concrete Utilising Distributed Optical Fiber Sensor
269. Surehali Sahil, Tripathi Avinaya, Neithalath Narayanan (2023-08)
     Anisotropy in Additively Manufactured Concrete Specimens Under Compressive Loading:
     Quantification of the Effects of Layer-Height and Fiber-Reinforcement
270. Zhang Yi, Zhu Yanmei, Ren Qiang, He Bei et al. (2023-08)
     Comparison of Printability and Mechanical Properties of Rigid and Flexible Fiber-Reinforced 3D Printed Cement-Based Materials
271. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-08)
     Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer for 3D Concrete Printing Application:
     Evaluating Fresh and Hardened Properties
272. Varela Hugo, Barluenga Gonzalo, Sonebi Mohammed (2023-07)
     Rheology Characterization of 3D Printing Mortars with Nano-Clays and Basalt-Fibers
273. Mousavi Seyed, Dehestani Mehdi (2023-07)
     On the Possibility of Using Waste-Disposable-Gloves as Recycled Fibers in Sustainable 3D Concrete Printing Using Different Additives
274. Zohrabyan Vahan, Zöller Raphael, Gradic Simon, Braml Thomas (2023-06)
     Potential of 3D Printed Steel Fiber Reinforced Concrete Components for the Protection of Critical Infrastructure:
     Impact and Free-Fall Tests
275. Yang Hui-Qin, Klug Christina, Schmitz Thomas (2023-06)
     Fiber-Reinforced Clay:
     An Exploratory Study on Automated Thread Insertion for Enhanced Structural Integrity in LDM.
276. Ungureanu Dragoș, Onuțu Cătălin, Isopescu Dorina, Țăranu Nicolae et al. (2023-06)
     A Novel Approach for 3D Printing Fiber-Reinforced Mortars
277. Mu Ru, Mei Shaolin, Wang Xiaowei, Chen Xiangshang et al. (2023-06)
     Mechanical Properties of a 3D Printed SFRC Beam with Steel-Fiber-Distribution Adaptive to Tensile Stress
278. Fernández Fernando, Jarabo Rocío, Asensio Eloy, Guerrero Ana (2023-06)
     Natural Fibers for a 3D Printable Eco-ECC Material
279. Liu Junli, Tran Jonathan, Nguyen Vuong, Gunasekara Chamila et al. (2023-06)
     3D Printing of Cementitious Mortar with Milled Recycled Carbon-Fibers:
     Influences of Filament Offset on Mechanical Properties
280. Chen Wei, Pan Jinlong, Zhu Binrong, Ma XiaoMeng et al. (2023-06)
     Improving Mechanical Properties of 3D Printable One-Part Geopolymer Concrete with Steel-Fiber-Reinforcement
281. Nikravan Ata, Aydoğan Olcay, Dittel Gözdem, Scheurer Martin et al. (2023-06)
     Implementation of Continuous Textile-Fibers in 3D Printable Cementitious Composite
282. Pietras Daniel, Zbyszyński Wojciech, Sadowski Tomasz (2023-06)
     A 3D Printing Method of Cement-Based FGM Composites Containing Granulated Cork, Polypropylene Fibers, and a Polyethylene Net Inter-Layer
283. Pham Thi, Trinh Duy, Nguyen Thi, Do Trong et al. (2023-06)
     Study on Flexural Behavior of Printed Concrete Wide Beams Using Polypropylene-Fibers
284. Uddin Md, Ye Junhong, Deng Boyu, Li Lingzhi et al. (2023-04)
     Interpretable Machine Learning for Predicting the Strength of 3D Printed Fiber-Reinforced Concrete
285. Kumar Devalla Tharun, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2023-04)
     Investigation on the Flexural and Tensile Performance of 3D Printable Cementitious Mixtures Considering the Effect of Fiber-Distribution
286. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Gowripalan Nadarajah (2023-04)
     Effects of Different Orientation-Angle, Size, Surface-Roughness, and Heat-Curing on Mechanical Behavior of 3D Printed Cement-Mortar with and without Glass-Fiber in Powder-Based 3DP
287. Bai Meiyan, Wu Yuching, Xiao Jianzhuang, Ding Tao et al. (2023-04)
     Workability and Hardened Properties of 3D Printed Engineered Cementitious Composites Incorporating Recycled Sand and PE-Fibers
288. Rajeev Pathmanathan, Ramesh Akilesh, Navaratnam Satheeskumar, Sanjayan Jay (2023-04)
     Using Fiber Recovered from Face Mask Waste to Improve Printability in 3D Concrete Printing
289. Xu Nuoyan, Qian Ye (2023-04)
     Effects of Fiber-Volume Fraction, Fiber Length, Water-Binder Ratio, and Nano-Clay Addition on the 3D Printability of Strain-Hardening Cementitious Composites
290. Ramezani Amir, Modaresi Shahriar, Dashti Pooria, Givkashi Mohammad et al. (2023-04)
     Effects of Different Types of Fibers on Fresh and Hardened Properties of Cement and Geopolymer-Based 3D Printed Mixtures:
     A Review
291. Seo Eun-A, Kim Won-Woo, Kim Sung-Wook, Kwon Hongkyu et al. (2023-03)
     Mechanical Properties of 3D Printed Concrete with Coarse Aggregates and Polypropylene-Fiber in the Air and Underwater Environment
292. Wang Li, Hu Yuanyuan, Wang Qiao, Cui Tianlong (2023-03)
     Shrinkage and Cracking Performance of PP/PVA Fiber-Reinforced 3D Printed Mortar
293. Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
     Computational Modeling of Fiber Orientation During 3D Concrete Printing
294. Uddin Md, Mahamoudou Faharidine, Deng Boyu, Elobaid Musa Moneef et al. (2023-03)
     Prediction of Rheological Parameters of 3D Printed Polypropylene-Fiber-Reinforced Concrete by Machine Learning
295. Daadouch Koussay, Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
     Computational Modeling of Fiber Orientation During 3D Concrete Printing
296. Giwa Ilerioluwa, Game Daniel, Ahmed Hassan, Noorvand Hassan et al. (2023-02)
     Performance and Macrostructural Characterization of 3D Printed Steel-Fiber-Reinforced Cementitious Materials
297. Pang Zhiming, Lu Cong, Li Baoshan, Wang Jiajie (2023-02)
     A Multi-Scale Model for Quantifying Fiber-Orientation Effects on the Tensile Properties of 3D Printed Engineered Cementitious Composites
298. Pons-Valladares Oriol, Casanovas-Rubio Maria, Armengou Jaume, Fuente Albert (2023-02)
     Approach for Sustainability-Assessment for Footbridge Construction Technologies:
     Application to the First World D-Shape 3D Printed Fiber-Reinforced Mortar Footbridge in Madrid
299. Liu Qiang, Jiang Quan, Zhou Zhenhua, Xin Jie et al. (2023-02)
     The Printable and Hardened Properties of Nano-Calcium Carbonate with Modified Polypropylene-Fibers for Cement-Based 3D Printing
300. Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki (2023-01)
     Mechanical Properties of Fiber-Reinforced Cementitious Composites Manufactured Using 3D Printing Technology
301. Yang Yekai, Wu Chengqing, Liu Zhongxian (2023-01)
     Rate-Dependent Behavior of 3D Printed Ultra-High-Performance Fiber-Reinforced Concrete Under Dynamic Splitting Tensile
302. Nefs Karsten, Menkovski Vlado, Bos Freek, Suiker Akke et al. (2022-12)
     Automated Image Segmentation of 3D Printed Fibrous Composite Micro-Structures Using a Neural Network
303. Qing Longbang, Sun Honglei, Zhang Yuebo, Mu Ru et al. (2022-12)
     Research Progress on Aligned Fiber-Reinforced Cement-Based Composites
304. Liu Xiongfei, Li Jixiang, Li Qi, Hou Gunayu (2022-11)
     Mechanical Performance Optimization in Spray-Based Three-Dimensional-Printed Mortar Using Carbon-Fiber
305. Zhou Yiyi, Jiang Dan, Sharma Rahul, Xie Yi et al. (2022-11)
     Enhancement of 3D Printed Cementitious Composite by Short Fibers:
     A Review
306. Lv Chun, Shen Hongtao, Liu Jie, Wu Dan et al. (2022-11)
     Properties of 3D Printing Fiber-Reinforced Geopolymers Based on Inter-Layer Bonding and Anisotropy
307. Zhao Yu, Yang Guang, Zhu Lingli, Ding Yahong et al. (2022-10)
     Effects of Rheological Properties and Printing Speed on Molding Accuracy of 3D Printing Basalt-Fiber Cementitious Materials
308. Nguyen Vuong, Liu Junli, Li Shuai, Zhang Guomin et al. (2022-10)
     Modelling of 3D Printed Bio-Inspired Bouligand Cementitious Structures Reinforced with Steel-Fibers
309. Yang Rijiao, Zhu Yi, Lan Yan, Zeng Qiang et al. (2022-10)
     Differences in Micro Grain & Fiber-Distributions Between Matrix and Inter-Layer of Cementitious Filaments Affected by Extrusion-Molding
310. Zhang Yu, Zhang Yunsheng, Qian Rusheng, Liu Guojian et al. (2022-09)
     Influence of Steel-Fiber on the Water-Absorption of 3D Printed Concrete
311. Liu Bing, Liu Xiaoyan, Li Guangtao, Geng Songyuan et al. (2022-09)
     Study on Anisotropy of 3D Printing PVA-Fiber-Reinforced Concrete Using Destructive and Non-Destructive Testing Methods
312. Weiner G., Wurst G., Lessmeister T., Sherizadeh T. et al. (2022-09)
     Triangulating Impact Location in 3D Printable Concrete Using Fiber Bragg Grating Sensors
313. Ma Lei, Zhang Qing, Lombois-Burger Hélène, Jia Zijian et al. (2022-09)
     Pore-Structure, Internal Relative Humidity, and Fiber-Orientation of 3D Printed Concrete with Polypropylene-Fiber and Their Relation with Shrinkage
314. Kompella Sriram, Monte Francesco, Bassani Andrea, Guanziroli Stefano et al. (2022-09)
     A Comparative Study of Hardened-State Mechanical Properties of 3D Printed and Conventionally Cast Fiber-Reinforced Concrete
315. Engelhard Michael, Kalytta-Mewesand Andreas, Volkmer Dirk (2022-09)
     Testing Methods for Deformation Characterization on 3D Printed Carbon Fiber-Reinforced Cementitious Composites
316. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2022-09)
     Robot-Assisted Flow-Production-Processes Tool-Development for the Fabrication of Thin-Walled Fiber-Reinforced Concrete Elements
317. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2022-09)
     Fresh Properties and Strength Evolution of Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer Composite for 3D Concrete Printing Application
318. Ahmed Hassan, Giwa Ilerioluwa, Game Daniel, Hebert Marc et al. (2022-09)
     Studying Steel-Fiber-Reinforcement for 3D Printed Elements and Structures
319. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-08)
     Evaluation of Aggregates, Fibers and Voids-Distribution in 3D Printed Concrete
320. Mousavi Seyed, Dehestani Mehdi (2022-08)
     Influence of Latex and Vinyl Disposable Gloves as Recycled Fibers in 3D Printing Sustainable Mortars
321. Silva Guido, Ñañez Robert, Zavaleta Diana, Burgos Valeria et al. (2022-07)
     Eco-Friendly Additive Construction:
     Analysis of the Printability of Earthen-Based Matrices Stabilized with Potato-Starch-Gel and Sisal-Fibers
322. Wang Li, Li Qiqi, Hu Yuanyuan, Cui Tianlong et al. (2022-07)
     Shrinkage and Cracking Properties of Cellulose-Fiber-Concrete Composites for 3D Printing by Leveraging Internal Curing
323. Singh Amardeep, Chen Zhiyuan, Duan Zhenhua, Li Lei (2022-07)
     Utilization Potential of Steel-Fibers in 3D Printed Functionally Graded Cementitious Composite:
     An Experimental Approach
324. Bong Shin, Nematollahi Behzad, Nerella Venkatesh, Mechtcherine Viktor (2022-06)
     Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite
325. Asakawa Tomoya, Nishiwaki Tomoya, Ohno Kazunori, Yokoyama Shigeru et al. (2022-06)
     Fundamental Study on Automated Inter-Layer Reinforcing System with Metal-Fiber-Insertion for 3D Concrete Printer
326. Gantner Stefan, Rennen Philipp, Rothe Tom, Hühne Christian et al. (2022-06)
     Core Winding:
     Force-Flow-Oriented Fiber-Reinforcement in Additive Manufacturing with Concrete
327. Neef Tobias, Müller Steffen, Mechtcherine Viktor (2022-06)
     Integration of Mineral Impregnated Carbon-Fiber (MCF) into Fine 3D Printed Concrete Filaments
328. Neef Tobias, Butler Marko, Mechtcherine Viktor (2022-06)
     Integrating Mineral-Bonded Carbon Fibers into 3D Concrete Printing
329. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-06)
     Mitigating Early-Age Cracking in 3D Printed Concrete Using Fibers, Superabsorbent Polymers, Shrinkage Reducing Admixtures, B-CSA Cement and Curing Measures
330. Jiang Quan, Liu Qiang, Wu Si, Zheng Hong et al. (2022-06)
     Modification Effect of Nano-Silica and Polypropylene-Fiber for Extrusion-Based 3D Printing Concrete:
     Printability and Mechanical Anisotropy
331. Reinold Janis, Gudžulić Vladislav, Meschke Günther (2022-05)
     Fiber-Orientation Modeling During Extrusion-Based 3D Concrete Printing
332. Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Kamile, Felekoğlu Burak (2022-05)
     Effect of Fiber-Reinforcement on Extrudability and Buildability of Mineral-Additive-Modified Portland-Cement Mortars:
     A Rheometer-Based Simulation-Analysis
333. Yang Rijiao, Zeng Qiang, Peng Yu, Wang Hailong et al. (2022-05)
     Anomalous Matrix and Inter-Layer Pore-Structure of 3D Printed Fiber-Reinforced Cementitious Composites
334. Ou Ya, Bao Ding, Zhu Guan-Qi, Luo Dan (2022-04)
     Additive Fabrication of Large-Scale Customizable Formwork Using Robotic Fiber-Reinforced Polymer Winding
335. Li Weihong, Chen Xuhao, Li Nan (2022-04)
     3D Printing of Fast Setting Basalt Fiber-Reinforced Cement-Based Materials
336. Fuente Albert, Blanco Ana, Galeote Eduardo, Cavalaro Sergio (2022-04)
     Structural Fiber-Reinforced Cement-Based Composite Designed for Particle-Bed 3D Printing Systems:
     Case Study Parque De Castilla Footbridge in Madrid
337. Liu Xiongfei, Li Qi, Li Jixiang (2022-04)
     Shrinkage and Mechanical Properties Optimization of Spray-Based 3D Printed Concrete by PVA-Fiber
338. Chen Yidong, Zhang Yunsheng, Pang Bo, Wang Dafu et al. (2022-04)
     Steel-Fiber Orientational Distribution and Effects on 3D Printed Concrete with Coarse Aggregate
339. Bong Shin, Nematollahi Behzad, Xia Ming, Ghaffar Seyed et al. (2022-04)
     Properties of Additively Manufactured Geopolymer Incorporating Mineral-Wollastonite-Micro-Fibers
340. Liu Jie, Lv Chun (2022-03)
     Properties of 3D Printed Polymer Fiber-Reinforced Mortars:
     A Review
341. Adams Thomas, Heuer Christoph, Brell-Cokcan Sigrid (2022-03)
     Dynamic 3D Print-Head for Spatial Strand-Extrusion of Fiber-Reinforced Concrete:
     Requirements, Development and Application
342. Yalçınkaya Çağlar (2022-03)
     Influence of Hydroxypropyl Methylcellulose Dosage on the Mechanical Properties of 3D Printable Mortars with and without Fiber-Reinforcement
343. Yang Shutong, Lan Tian, Sun Zhongke, Xu Mingqi et al. (2022-03)
     A Predictive Model to Determine Tensile Strength and Fracture-Toughness of 3D Printed Fiber-Reinforced Concrete Loaded in Different Directions
344. Yang Yekai, Wu Chengqing, Liu Zhongxian, Li Jun et al. (2022-02)
     Characteristics of 3D Printing Ultra-High-Performance Fiber-Reinforced Concrete Under Impact Loading
345. Nguyen Ngoc, Bui Tan-Trung, Bui Quoc-Bao (2022-02)
     Fiber-Reinforced Concrete for Slabs without Steel-Rebar-Reinforcement:
     Assessing the Feasibility for 3D Printed Individual Houses
346. Pham Luong, Lu Guoxing, Tran Jonathan (2022-02)
     Influences of Printing-Pattern on Mechanical Performance of Three-Dimensional-Printed Fiber-Reinforced Concrete
347. Kajimoto Jumpei, Koyanagi Jun, Maruyama Yusuke, Kajita Hideyuki et al. (2022-02)
     Automated Interlaminar-Reinforcement with Thickness-Directiona-Fiber-Arrangement for 3D Printing
348. Singh Amardeep, Liu Qiong, Xiao Jianzhuang, Lyu Qifeng (2022-02)
     Mechanical and Macrostructural Properties of 3D Printed Concrete Dosed with Steel-Fibers under Different Loading-Direction
349. M’Lahfi Basma, Amegouz Driss, Qandil Mostafa (2022-01)
     New Printable Concrete Formulation Based on Fibers from Doum Palm Leaflets for 3D Printing of Energy-Efficient Buildings
350. Sukontasukkul Piti, Panklum Kasidet, Maho Buchit, Banthia Nemkumar et al. (2021-12)
     Effect of Synthetic Micro-Fiber and Viscosity-Modifying-Agent on Layer Deformation, Viscosity, and Open-Time of Cement Mortar for 3D Printing Application
351. Yang Yekai, Wu Chengqing, Liu Zhongxian, Zhang Hai (2021-12)
     3D Printing Ultra-High-Performance Fiber-Reinforced Concrete under Triaxial Confining Loads
352. Zhou Jiehang, Lai Jianzhong, Du Longyu, Wu Kai et al. (2021-12)
     Effect of Directionally Distributed Steel-Fiber on Static and Dynamic Properties of 3D Printed Cementitious Composite
353. Cai Jingming, Sheng Zhaoliang, Wang Xiaoyi, Fang Yizhi et al. (2021-12)
     Effect of Reinforcement-Configurations on the Flexural Behaviors of 3D Printed Fiber-Reinforced Cementitious Composite Beams
354. Lesovik Valeriy, Fediuk Roman, Amran Mugahed, Alaskhanov Arbi et al. (2021-12)
     3D Printed Mortars with Combined Steel and Polypropylene Fibers
355. Nair Sooraj, Li Anling, Mobasher Barzin, Neithalath Narayanan (2021-12)
     Effect of Layer-Height on Tensile Stress-Distribution and Crack-Width and Propagation in 3D Printed Fiber-Reinforced Flexural Elements
356. Pierson Matthew, Pinkerton Luke (2021-12)
     Direct Tension Testing of Plain and Fiber-Reinforced Concrete for Use in Additive Construction
357. Rutzen Matthias, Schulz Michael, Moosburger-Will Judith, Lauff Philipp et al. (2021-11)
     3D Printing as an Automated Manufacturing Method for a Carbon-Fiber-Reinforced Cementitious Composite with Outstanding Flexural Strength (105 N/mm²)
358. Jin Yuan, Zhou Xiaolong, Chen Mingxu, Zhao Zhihui et al. (2021-11)
     High-Toughness 3D Printed White Portland-Cement-Based Materials with Glass-Fiber-Textile
359. Sun Xiaoyan, Zhou Jiawei, Wang Qun, Shi Jiangpeng et al. (2021-11)
     PVA-Fiber-Reinforced High-Strength Cementitious Composite for 3D Printing:
     Mechanical Properties and Durability
360. Lauff Philipp, Pugacheva Polina, Rutzen Matthias, Weiss Ursula et al. (2021-11)
     Evaluation of the Behavior of Carbon-Short-Fiber-Reinforced Concrete (CSFRC) Based on a Multi-Sensory Experimental Investigation and a Numerical Multi-Scale Approach
361. Pham Luong, Panda Biranchi, Tran Jonathan (2021-11)
     Fresh and Hardened Properties of 3D Printable Polymer-Fiber-Reinforced High-Performance Cementitious Composite
362. Ledderose Lukas, Baghdadi Abtin, Kloft Harald (2021-11)
     Magnetic Alignment of Microsteel-Fibers as Strategy for Reinforcing UHPFRC
363. Gantner Stefan, Rothe Tom, Hühne Christian, Hack Norman (2021-11)
     Reinforcement-Strategies for Additive Manufacturing in Construction Based on Dynamic Fiber Winding:
     Concepts and Initial Case Studies
364. Antoni Antoni, Agraputra A., Teopilus D., Sunaryo A. et al. (2021-11)
     Investigation of the Material-Mixtures and Fiber-Addition for 3D Concrete Printing
365. Nishiwaki Tomoya, Miyata Yoshihiro, Furue Shoko, Fukatsu Shiko et al. (2021-11)
     Reinforcing Interlayers of Three-Dimensional-Printed Mortar Using Metal-Fiber-Insertion
366. Sonebi Mohammed, Dedenis Marie, Abdalqader Ahmed, Perrot Arnaud (2021-11)
     Effect of Red Mud, Nano-Clay, and Natural Fiber on Fresh and Rheological Properties of Three-Dimensional Concrete Printing
367. Fischer Gregor, Paegle Ieva (2021-11)
     Reinforcement of Three-Dimensional-Printed Concrete Structures by Weaving and Knitting of Continuous Fibers and Wires
368. Yang Yekai, Wu Chengqing, Liu Zhongxian, Wang Hailiang et al. (2021-10)
     Mechanical Anisotropy of Ultra-High-Performance Fiber-Reinforced Concrete for 3D Printing
369. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Khayat Kamal et al. (2021-10)
     Digital Fabrication of Eco-Friendly Ultra-High-Performance Fiber-Reinforced Concrete
370. Tran Mien, Cu Yen, Le Chau (2021-10)
     Rheology and Shrinkage of Concrete Using Polypropylene-Fiber for 3D Concrete Printing
371. Nassar Roz-Ud-Din, Soroushian Parviz, Balachandra Anagi, Nassar Shumayal et al. (2021-09)
     Evaluation of Refined Cement-Based Matrix Systems for Extrusion of Wood-Fiber Cement
372. Ge Zhi, Tawfek Abdullah, Zhang Hongzhi, Yang Yongwei et al. (2021-09)
     Influence of an Extrusion-Approach on the Fiber-Orientation and Mechanical Properties of Engineering Cementitious Composite
373. Gebhard Lukas, Mata-Falcón Jaime, Markić Tomislav, Kaufmann Walter (2021-09)
     Aligned Inter-Layer Fiber-Reinforcement for Digital Fabrication with Concrete
374. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2021-09)
     Examining Layer-Height Effects on the Flexural and Fracture Response of Plain and Fiber-Reinforced 3D Printed Beams
375. Kompella Sriram, Marcucci Andrea, Monte Francesco, Bassani Andrea et al. (2021-09)
     A Study of Early-Age Shear Properties of 3D Printable Cementitious Mixes with Fiber-Reinforcements
376. Zhang Ping, Lu Xiao-jun (2021-09)
     Study on Bending Strength of Cementitious Composites Based on Fiber-Alignment
377. Xiao Jianzhuang, Zou Shuai, Ding Tao, Duan Zhenhua et al. (2021-08)
     Fiber-Reinforced Mortar with 100% Recycled Fine Aggregates:
     A Cleaner Perspective on 3D Printing
378. Zhang Yifan, Aslani Farhad (2021-08)
     Development of Fiber-Reinforced Engineered Cementitious Composite Using Polyvinyl-Alcohol-Fiber and Activated Carbon-Powder for 3D Concrete Printing
379. Putten Jolien, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-08)
     Development of 3D Printable Cementitious Composites with the Incorporation of Polypropylene Fibers
380. Scheurer Martin, Quenzel Philipp, Nölke Peter, Reuter‐Schniete Jonas et al. (2021-07)
     Investigating the Feasibility of Using Carbon Fiber Tapes as Reinforcement for 3D Concrete Printing
381. Caron Jean-François, Demont Léo, Ducoulombier Nicolas, Mesnil Romain (2021-06)
     3D Printing of Mortar with Continuous Fibers:
     Principle, Properties and Potential for Application
382. Sun Junbo, Aslani Farhad, Lu Jenny, Wang Lining et al. (2021-06)
     Fiber-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing
383. Hierden Naomi, Gauvin Florent, Lucas Sandra, Salet Theo et al. (2021-06)
     Use of Hemp-Fibers in 3D Printed Concrete
384. Hack Norman, Bahar Mohammad, Hühne Christian, Lopez William et al. (2021-06)
     Development of a Robot-Based Multi-Directional Dynamic Fiber Winding Process for Additive Manufacturing Using Shotcrete 3D Printing
385. Xiao Jianzhuang, Han Nv, Zhang Lihai, Zou Shuai (2021-05)
     Mechanical and Microstructural Evolution of 3D Printed Concrete with Polyethylene-Fiber and Recycled Sand at Elevated Temperatures
386. Zhang Hao, Zhu Liming, Zhang Fan, Yang Mijia (2021-04)
     Effect of Fiber Content and Alignment on the Mechanical Properties of 3D Printing Cementitious Composites
387. Ding Tao, Xiao Jianzhuang, Zou Shuai, Yu Jiangtao (2021-03)
     Flexural Properties of 3D Printed Fiber-Reinforced Concrete with Recycled Sand
388. Rutzen Matthias, Lauff Philipp, Niedermeier Roland, Fischer Oliver et al. (2021-03)
     Influence of Fiber-Alignment on Pseudoductility and Micro-Cracking in a Cementitious Carbon-Fiber Composite Material
389. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-02)
     Effect of Polyethylene-Fiber Content on Workability and Mechanical-Anisotropic Properties of 3D Printed Ultra-High-Ductile Concrete
390. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2021-02)
     Fiber-Orientation Effects on Ultra-High-Performance Concrete Formed by 3D Printing
391. Klyuev Sergey, Klyuev Alexander, Shorstova Elena (2021-02)
     Technology of 3D Printing of Fiber-Reinforced Mixtures
392. Demont Léo, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2021-01)
     Flow-Based Pultrusion of Continuous Fibers for Cement-Based Composite Material and Additive Manufacturing:
     Rheological and Technological Requirements
393. Chen Mingxu, Yang Lei, Zheng Yan, Li Laibo et al. (2021-01)
     Rheological Behaviors and Structure Build-Up of 3D Printed Polypropylene- and Polyvinyl-Alcohol-Fiber-Reinforced Calcium-Sulphoaluminate-Cement Composites
394. Luhar Salmabanu, Suntharalingam Thadshajini, Navaratnam Satheeskumar, Luhar Ismail et al. (2020-12)
     Sustainable and Renewable Bio-Based Natural Fibers and Its Application for 3D Printed Concrete:
     A Review
395. Bohuchval Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud (2020-12)
     Effect of Metakaolin and Natural Fibers on Three-Dimensional Printing Mortar
396. Dubov Alexey, Ruben Sam, Korshikov Vasily, Ivanova Anna et al. (2020-11)
     3D Printing of Polymers with Continuous Fibers to Replace Steel-Reinforcement and Structural Steel in Construction
397. Li Leo, Xiao Bofeng, Fang Z., Xiong Z. et al. (2020-11)
     Feasibility of Glass-Basalt Fiber-Reinforced Seawater Coral Sand Mortar for 3D Printing
398. Matthäus Carla, Kofler Nadine, Kränkel Thomas, Weger Daniel et al. (2020-10)
     Inter-Layer Reinforcement Combined with Fiber-Reinforcement for Extruded Lightweight Mortar Elements
399. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2020-10)
     Development of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction
400. Chu Shaohua, Li Leo, Kwan Albert (2020-09)
     Development of Extrudable High-Strength Fiber-Reinforced Concrete Incorporating Nano-Calcium-Carbonate
401. Ding Tao, Xiao Jianzhuang, Zou Shuai, Zhou Xinji (2020-08)
     Anisotropic Behavior in Bending of 3D Printed Concrete Reinforced with Fibers
402. Fioretti Marta, Kompella Sriram, Monte Francesco, Esposito Laura et al. (2020-07)
     Experimental Investigation on the Early-Age Tensile Strength of Fiber-Reinforced Mortar Used in 3D Concrete Printing
403. Arunothayan Arun, Nematollahi Behzad, Sanjayan Jay, Ranade Ravi et al. (2020-07)
     Quantitative Evaluation of Orientation of Steel-Fibers in 3D Printed Ultra-High-Performance Concrete
404. Bong Shin, Nematollahi Behzad, Arunothayan Arun, Xia Ming et al. (2020-07)
     Effect of Wollastonite Micro-Fiber Addition on Properties of 3D Printable ‘Just-Add-Water’ Geopolymers
405. Scheurer Martin, Dittel Gözdem, Gries Thomas (2020-07)
     Potential for the Integration of Continuous-Fiber-Based Reinforcements in Digital Concrete Production
406. Shakor Pshtiwan, Nejadi Shami, Gowripalan Nadarajah (2020-07)
     Effect of Heat-Curing and E6-Glass Fiber-Reinforcement Addition on Powder-Based 3DP Cement Mortar
407. Suntharalingam Thadshajini, Nagaratnam Brabha, Poologanathan Keerthan, Hackney Phil et al. (2020-07)
     Effect of Polypropylene-Fibers on the Mechanical Properties of Extrudable Cementitious Material
408. Dedenis Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud et al. (2020-07)
     Effect of Metakaolin, Fly-Ash and Polypropylene-Fibers on Fresh and Rheological Properties of 3D Printing Based Cement Materials
409. Bester Frederick, Heever Marchant, Kruger Jacques, Cho Seung et al. (2020-07)
     Steel-Fiber Links in 3D Printed Concrete
410. Hameed Rashid, Papon Aurélie, Perrot Arnaud, Rangeard Damien (2020-07)
     Effect of Metallic Fibers on the Print Quality and Strength of 3D Printed Concrete
411. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
     Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
412. Ducoulombier Nicolas, Demont Léo, Chateau Camille, Bornert Michel et al. (2020-04)
     Additive Manufacturing of Anisotropic Concrete:
     A Flow-Based Pultrusion of Continuous Fibers in a Cementitious Matrix
413. Pham Luong, Tran Jonathan, Sanjayan Jay (2020-04)
     Steel-Fiber-Reinforced 3D Printed Concrete:
     Influence of Fiber Sizes on Mechanical Performance
414. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Cunha Vítor (2020-03)
     Inverse Analysis of Three-Point Bending Tests for 3D Printed Fiber-Reinforced Mortars
415. Kosson Michael, Brown Lesa, Sanchez Florence (2020-01)
     Early-Age Performance of 3D Printed Carbon-Nano-Fiber and Carbon Micro-Fiber Cement Composites
416. Shakor Pshtiwan, Nejadi Shami, Sutjipto Sheila, Paul Gavin et al. (2020-01)
     Effects of Deposition-Velocity in the Presence-Absence of E6-Glass-Fiber on Extrusion-Based 3D Printed Mortar
417. Suntharalingam Thadshajini, Nagaratnam Brabha, Poologanathan Keerthan, Hackney Phil et al. (2019-12)
     Effect of Polypropylene-Fibers on the Workability Parameters of Extrudable Cementitious Materials
418. Pham Luong, Lin Xiaoshan, Gravina R., Tran Jonathan (2019-12)
     Influence of PVA- and PP-Fibers at Different Volume Fractions on Mechanical Properties of 3D Printed Concrete
419. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
     New Carbon Fiber Reinforcement for Digital, Automated Concrete Construction
420. Mechtcherine Viktor, Michel Albert, Liebscher Marco, Schneider Kai et al. (2019-11)
     Mineral-Impregnated Carbon-Fiber Composites as Novel Reinforcement for Concrete Construction:
     Material and Automation Perspectives
421. Silva Guido, Quispe L., Kim Suyeon, Nakamatsu Javier et al. (2019-11)
     Development of a Stabilized Natural Fiber-Reinforced Earth Composite for Construction Applications Using 3D Printing
422. Falliano Devid, Sciarrone Antonino, Domenico Dario, Maugeri Natale et al. (2019-10)
     Fiber-Reinforced Lightweight Foamed Concrete Panels Suitable for 3D Printing Applications
423. Bong Shin, Nematollahi Behzad, Xia Ming, Nazari Ali et al. (2019-09)
     Properties of 3D Printable Ductile Fiber-Reinforced Geopolymer Composite for Digital Construction Applications
424. Arunothayan Arun, Nematollahi Behzad, Bong Shin, Ranade Ravi et al. (2019-09)
     Hardened Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction Applications
425. Rutzen Matthias, Volkmer Dirk, Weiss Ursula, Reischmann Lisa et al. (2019-09)
     Micro-Structural Analysis of Crack-Growth Caused by Static and Dynamic Loads in a Carbon-Fiber-Reinforced Cement-Paste
426. Ducoulombier Nicolas (2019-06)
     Characterisation and Modelling of Interfacial-Damage in Fiber-Reinforced Concrete for 3D Printing in Construction
427. Cho Seung, Kruger Jacques, Zeranka Stephan, Rooyen Algurnon et al. (2019-06)
     Mechanical Evaluation of 3D Printable Nano-Silica Incorporated Fiber-Reinforced Lightweight Foam-Concrete
428. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
     A Study into the Effect of Different Nozzles Shapes and Fiber-Reinforcement in 3D Printed Mortar
429. Hambach Manuel, Rutzen Matthias, Volkmer Dirk (2019-02)
     Properties of 3D-Printed Fiber-Reinforced Portland Cement-Paste
430. Nam Young, Hwang Young, Park Ji, Lim Yun (2019-02)
     Fiber-Reinforced Cementitious Composite Design with Controlled Distribution and Orientation of Fibers Using Three-Dimensional Printing Technology
431. Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
     Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing
432. Ledderose Lukas, Lehmberg Sven, Budelmann Harald, Kloft Harald (2018-12)
     Robot-Assisted, Magnetic Alignment of Microsteel Fibers in Thin-Walled UHPFRC Components
433. Weng Yiwei, Li Mingyang, Liu Zhixin, Lao Wenxin et al. (2018-12)
     Printability and Fire Performance of a Developed 3D Printable Fiber-Reinforced Cementitious Composites under Elevated Temperatures
434. Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
     Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction
435. Bos Freek, Bosco Emanuela, Salet Theo (2018-11)
     Ductility of 3D Printed Concrete Reinforced with Short Straight Steel-Fibers
436. Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
     Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing
437. Pfändler Patrick, Wangler Timothy, Mata-Falcón Jaime, Flatt Robert et al. (2018-09)
     Potentials of Steel-Fibers for Mesh Mould Elements
438. Weng Yiwei, Qian Shunzhi, He Lewei, Li Mingyang et al. (2018-05)
     3D Printable High-Performance Fiber-Reinforced Cementitious Composites For Large-Scale Printing
439. Lim Jian, Weng Yiwei, Li Mingyang (2018-05)
     Effect of Fiber-Reinforced Polymer on Mechanical Performance of 3D Printed Cementitious Material
440. Nam Young, Hwang Young, Park Ji, Lim Yun (2018-02)
     Feasibility Study to Control Fiber-Distribution for Enhancement of Composite Properties via Three-Dimensional Printing
441. Panda Biranchi, Paul Suvash, Tan Ming (2017-07)
     Anisotropic Mechanical Performance of 3D Printed Fiber-Reinforced Sustainable Construction-Material
442. Hambach Manuel, Volkmer Dirk (2017-02)
     Properties of 3D Printed Fiber-Reinforced Portland-Cement-Paste
443. Hambach Manuel, Möller Hendrik, Neumann Thomas, Volkmer Dirk (2016-08)
     Portland-Cement-Paste with Aligned Carbon-Fibers Exhibiting Exceptionally High Flexural Strength (>100 MPa)
444. Nam Young, Park Ji, Yoon Seung, Lim Yun (2016-06)
     3D Printing of Fibers and Reinforcements for Cementitious Composites to Maximize the Fracture-Resisting Performance of FRCCs
445. Farina Ilenia, Fabbrocino F., Carpentieri G., Modano M. et al. (2015-12)
     On the Reinforcement of Cement Mortars through 3D Printed Polymeric- and Metallic-Fibers
446. Ledderose Lukas, Neudecker Stefan, Kloft Harald (2015-08)
     Robot-Aided Rearrangement of Steel-Fibers in UHPFRC via Magnetic Forces
447. Christ Susanne, Schnabel Martin, Vorndran Elke, Groll Jürgen et al. (2014-10)
     Fiber-Reinforcement During 3D Printing
448. Takashima Hiroyuki, Miyagai Kiyotaka, Hashida Toshiyuki, Li Victor (2002-09)
     A Design Approach for the Mechanical Properties of Polypropylene-Discontinuous-Fiber-Reinforced Cementitious Composites by Extrusion-Molding