Skip to content

#effect

Keywords by Co - Occurrence

  1. Janghorban Emad, Joshi Arpan, Gaspar Florindo (2026-04)
    Evaluating the Effect of Glass and Carbon Fiber Mesh on 3D-Printed Concrete Performance
  2. Wu Jie, Mi Jiwei, Hua Sudong, Yue Hongfei et al. (2026-04)
    Effects and Mechanisms of Modified Superabsorbent Polymers on Shrinkage Behavior of 3D-Printable Mortar
  3. Kumar Sandeep, Dixit Anjaneya (2026-04)
    3D-Printable Concrete Using Stabilized Soil:
    Effect of Binders and Curing Regimes on the Engineering Performance
  4. Warsi Syed, Panda Biranchi, Biswas Pankaj (2026-04)
    3D Finite Element Analysis on the Effects of Boundary Elements Confinement on Cyclic Performance of 3D Printed Concrete Wall
  5. Xu Wenbin, Xu Zihao, Liu Tao, Ouyang Jun et al. (2026-03)
    A Prediction Model of Interlayer Bond Strength for 3D-Printed Concrete Considering Printing Interval and Environmental Effects
  6. Wu Yiwen, Liu Chao, Liu Huawei, Pan Zhihong et al. (2026-03)
    Multiscale Mechanistic Insights into the Dual Effect of Interlayer Reinforcement on the Shear Behavior of 3D-Printed Concrete Composite Walls
  7. Wang Qingwei, Pan Jinlong, Han Song, Zhu Binrong et al. (2026-03)
    Effects of Nozzle Height on the Layer Deposition Process and Forming Performance of 3D Printing Concrete:
    Evidence from Experiments and CFD Simulations
  8. Dewi Melati, Wang Wei-Chien, Lin Wei-Ting (2026-03)
    Development of Low-Thermal-Conductivity Fly Ash Geopolymer Foam Mortars with Stabilizer Effects and 3D Printability Assessment
  9. Luo Jianfen, Wang Qidong, Wang Lijia, Fang Mingyue (2026-03)
    Effects of MXene on the Hydration Process, Pore Structure and Mechanical Performance of 3D-Printed Cementitious Materials
  10. Šerelis Evaldas, Vaitkevičius Vitoldas, Korat Bensa Lidija, Serjun Vesna et al. (2026-03)
    Effect of Chemical and Physico-Chemical Activation on the Properties of 3D Printed Concrete with a Low-Cement Multicomponent Binder
  11. Chen Chi, Wang Shenglin, Li Xiaoyuan, Yang Dengwei (2026-03)
    Recent Progress and Methodology for the Characterization of Layer-Effects of Extrusion-Based 3D-Printed Concrete
  12. Lunsford Caleb, Spencer Lawson, Shen Dongye, Genedy Moneeb et al. (2026-03)
    Effect of Toolpath Strategies on Anisotropy and Structural Performance of 3D Printed Concrete Gyroid Walls
  13. Tripathi Avinaya, Maurya Ashutosh, Rajan Subramaniam, Neithalath Narayanan (2026-02)
    Finite-Element Modeling Framework for Mechanical Response of 3D-Printed Concrete:
    Elucidating Directional, Interface, and Fiber Effects
  14. Zhu Wenxuan, Zhang Yu, Zhang Yunsheng, Liu Chao et al. (2026-02)
    Multiscale Investigation of Manufactured Sand Characteristics on 3D Printed Concrete Performance:
    Particle Morphology and Stone Powder Effects
  15. Alessandro Antonella, Sousa Israel, Laflamme Simon, Ubertini Filippo (2026-02)
    Effect of Carbon Fillers and Printing Path Strategy on Damage Detection in 3D-Printed Smart Concretes for Structural Health Monitoring
  16. Dey Dhrutiman, Panda Biranchi, Kole Jagabandhu (2026-02)
    Investigation into the Effect of Full Replacement with Portland Slag Cement and Screened Slag Sand for Development of Sustainable 3D Printed Concrete
  17. Hasan Kamrul, Alias Aizat, Hasan Mehedi, Yahaya Fadzil et al. (2026-02)
    Designing 3D-Printed Concrete with Ternary Blended Mortars Incorporating Fly Ash and Silica Fume:
    Effects of Low Water-Binder Ratios on Workability and Strength
  18. Chen Xusheng, Jia Zijian, Bao Bingtong, Dong Enlai et al. (2026-01)
    Effect of Coarse Aggregate and Steel Fiber Interaction under Extrusion on the Performance of 3D-Printed Steel Fiber-Reinforced Concrete
  19. Kang Yuyang, Yu Cheng, Zhang Zedi, Jia Lutao et al. (2026-01)
    The Coupling Effect of Viscosity Modifying Agents and Printing Process on the Air-Void Structure Formation of 3D Printed Air-Entrained Concrete
  20. Liu Chao, Chen Xianqin, Luo Zhiyu, Liu Huawei et al. (2026-01)
    Effects of Pore Defects on Interfacial Bonding Between Rebar and 3D Printed Coarse Aggregate Concrete Under Multiple Loading Conditions
  21. Singh Amardeep, Sun Jingting, Qi Deng, Abden Md et al. (2026-01)
    Evaluating Glass Powder Substitution for 3D Printed Concrete:
    Effects on Thermal Properties and Embodied Carbon
  22. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud (2026-01)
    Effect of Fly Ash, Basalt Fiber and Attapulgite Nanoclay on the Fresh Properties, Rheology and Shrinkage Behaviour of Printable Concrete
  23. Tinoco Matheus, Márquez Álvaro, Ramallo Laura, Barluenga Gonzalo et al. (2026-01)
    Effect of Cellulose Microfibers on Rheological Properties and Printability of 3D Printable Cement-Based Composites
  24. Nguyen Vuong, Jie Cheah, Zhang Y., Wong Hong (2025-12)
    Effect of Infill Architecture on Structural Performance and Sustainability of 3D-Printed Reinforced Concrete Columns
  25. Yan Yufei, Zhang Mo, Ma Guowei (2025-12)
    Synergistic Effect of Multi-Supplementary Materials on Rheology and Ultra-Early Stage Properties of 3D Printable FA-GBFS Geopolymer
  26. Akgümüş Fatih, Şahin Hatice, İsafça Kaya Tuğçe, Mardani Ali (2025-12)
    Combined Effect of Recycled Tire Steel Fiber and Blast Furnace Slag on the Mechanical Performance of 3D Printable Concrete
  27. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-12)
    Effect of Aggregate-to-Binder Ratio on 3D Printed Concrete:
    Printability, Mechanics, and Shrinkage
  28. Jacobi Ando, Zöllner Jan-Phillip, Hack Norman, Mai (née Dressler) Inka (2025-12)
    Encasement of Pre-Placed Reinforcement in Injection 3D Concrete Printing:
    The Effect of Rheology and Process Parameters
  29. Iqbal Imtiaz, Kasim Tala, Inqiad Waleed, Besklubova Svetlana et al. (2025-11)
    Effect of Metakaolin and Biochar Addition on the Performance of 3D Concrete Printing:
    A Meta-Analysis Approach
  30. Meier Niklas, Herding Friedrich, Zetzener Harald, Mai (née Dressler) Inka et al. (2025-11)
    Surface Modification of Bulk Material for Particle Bed 3D Concrete Printing:
    Effect on Wettability, Porosity, and Mechanical Properties
  31. Ebiloma David, Olatunbosun Olajumoke, Isang Inimbom, Aigbavboa Clinton (2025-11)
    Assessing the Effects of 3D-Printed Concrete for Sustainable Construction:
    The Stakeholders' Perspective
  32. Patel Aniket, Tripathi Avinaya, Kiran Ravi, Santhanam Manu et al. (2025-11)
    Decoupling Early-Age Free Shrinkage and Restraint Effects in 3D Printed Concrete Using Digital Image Correlation
  33. Zhou Jiehang, Du Longyu, Wu Kai, Lai Jianzhong et al. (2025-11)
    Effective Factors and a Prediction Method on Extrusion Flow of 3D Printed Concrete
  34. Oh Sangwoo, Lee Jinsuk, Oh Gyujong, Choi Seongcheol (2025-11)
    Effects of the Combined Incorporation of Superabsorbent Polymers and Polyvinyl Alcohol Fibers on Material Properties of 3D Printable Mortar:
    Rheology, Shrinkage, and Mechanical Behavior
  35. Lu Qi, Hua Sudong, Yue Hongfei (2025-11)
    Effect of Spherical Electric Arc Slag on Solid Waste-Based 3D-Printed Concrete
  36. Xu Shuhao, Lin Xing-Tao, Chen Xiangsheng (2025-11)
    Numerical Investigation of Anisotropic in 3D Printed Concrete Specimens Considering the Effects of Weak Interfaces and Pore-Induced Defects
  37. Song Qiang, Zhou Guangyu, Bao Hailing, Liu Qiong (2025-11)
    Study on the Effects of Nozzle Proximal Carbonation Mixing and Vacuum Dewatering on the Printability and Mechanical Properties of the 3D Printed Construction Mortar
  38. Janani Parthiban, Ganesh G. (2025-11)
    Synergistic Effects of Polypropylene Fibers on the Strength and Durability Properties of 3D Printed Concrete
  39. Sedighi Saeed, Rahai Alireza, Moodi Faramarz (2025-10)
    Multi-Criteria Optimization for Sustainable Concrete Mix Considering the Synergistic Effect of Recycled Steel Fiber and LC3 Concrete
  40. Xiao Jianzhuang, He Yao, Yu Miao, Wang Changhao et al. (2025-10)
    Effects of Pressurized CO2 Mixing on the Properties of Mortar
  41. Wei Jingjie, Khayat Kamal (2025-10)
    Effect of Chemical Additives on Performance of Low-Clinker 3D Printing Mortar
  42. Gu Yucun, Han Seongho, Khayat Kamal (2025-10)
    Effect of Absorption Kinetics of Superabsorbent Polymer on 3D Printing Characteristics
  43. Seepim Sirakan, Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk et al. (2025-10)
    Effects of Printing Interval Time on the Structural Performance of 3D-Printed Beams Under Four-Point Bending Loads
  44. Li Zhengrong, Xing Wenjing, Sun Jingting (2025-09)
    Heat Transfer Calculation and Correction for 3D Printed Walls Incorporating Surface Geometry Effects
  45. Zhou Juanlan, Shi Xiangwen, Zheng Hongrun, Jin Ruoyu et al. (2025-09)
    Investigating the Effects of Hybrid PVA/BF Fibers in Low-Carbon 3D Printed Concrete with Recycled Aggregates:
    Rheology, Strength, and Anisotropy
  46. Anwar Muhammad, Zhu Xingyi, Zhang Yating, Wang Jiakang et al. (2025-09)
    Synergistic Effects of Microwave Curing Regimes on Early, Mid, and Long-Term Strengths and Microstructural Performance of Fly Ash-Slag Based 3D-Printed Geopolymers
  47. Tian Xin, Shi Anqi, Fang Zhi, Lin Alexander (2025-09)
    Multi-Interface Effects on Mechanical Behavior in 3D-Printed Concrete Shear Keys:
    A Finite Element Modeling Strategy
  48. Jiang Youbau, Wen Jun, Gao Pengxiang, Liu Yan et al. (2025-09)
    Effect of Graphene Oxide on Physical and Mechanical Properties of 3D Printed Concrete
  49. Safanelli Nicollas, Schackow Adilson, Effting Carmeane, Matos Paulo (2025-09)
    The Effect of Crystalline Nanocellulose on the Rheology, Hydration of Cement Pastes, and Buildability of 3D-Printed Concrete
  50. Lin Yini, Yan Jiachuan, Sun Ming, Tang Boyang et al. (2025-08)
    Effects of Waste Glass Powder on Printability, Hydration and Microstructure of 3D Printing Concrete
  51. Mercimek Ömer, Şahin Oğuzhan, Çelik Alper, Ozkan Ekinci Mehmet et al. (2025-08)
    Structural Performance of Pre-Fabricated 3D Printed Concrete Walls:
    Effect of Cold Joint, Axial Load and Load Type
  52. Si Wen, Khan Mehran, McNally Ciaran (2025-08)
    Effect of Nano Silica with High Replacement of GGBS on Enhancing Mechanical Properties and Rheology of 3D Printed Concrete
  53. Medeiros Fernanda, Anjos Marcos, Maia José, Dias Leonardo et al. (2025-08)
    Effect of Sisal Fibers on the Behavior of 3D-Printed Cementitious Mixtures Exposed to High Temperatures
  54. İlerisoy Zeynep, Takva Çağatay, Top Semahat, Gökgöz Berru et al. (2025-08)
    The Effectiveness of 3D Concrete Printing Technology in Architectural Design:
    Different Corner-Wall Combinations in 3D Printed Elements and Geometric Form Configurations in Residential Buildings
  55. Wang Suguo, Wang Xing, Yan Xueyuan, Chen Shanghong (2025-08)
    Effects of Aggregate Size and Nozzle Diameter on Printability and Mechanical Properties of 3D Printed Ferronickel Slag-GGBFS Concrete
  56. Wang Jiakang, Anwar Muhammad, Zhu Xingyi, Zhang Yating et al. (2025-07)
    Robust Optimization of Formulation Ratios for the Mechanical, Microstructural and Printing Performance of Cost-Effective 3D Printing Geopolymer
  57. Panchal Priyanka, Choi Myoungsung (2025-07)
    A Review on Effect of Natural Fibers to Mitigate CO2 Footprint and Enhance Engineering Properties of 3D Printing Concrete
  58. Ma Jinyi, Zhang Haiyan, Wang Yanzhi, Xiong Lu et al. (2025-07)
    Effect of Clay Brick Powder and Recycled Fine Aggregates on Properties of 3D Printed Concrete After High Temperature Exposure
  59. Liu Qiang, Zhang Xinwei, Jiang Quan, Xia Yong et al. (2025-07)
    Effects of Nano-Al2O3, Nano-MgO and Nano-Fe2O3 on the Properties of Cement-Based 3D Printing:
    A Comparative Study
  60. Shi Ye, You Ge, Wu Pengtao, Liu Zhongxian et al. (2025-07)
    Effect of Water Film and Paste Film Thicknesses on Printability of 3D Printed Low Cement UHPC
  61. Sando Mona, Stephan Dietmar (2025-07)
    Online Monitoring for 3D Printable Geopolymers:
    Automated Slug Test Analysis with Image Analysis Revealing Mixing Sequence Effects
  62. Liu Nana, Wang Jie (2025-07)
    Experimental Study on the Effect of Water-Binder Ratio on 3D Printing Form of Concrete Mortar
  63. Gasmi Abrar, Guessasma Mohamed, Davidovits Ralph, Pélegris Christine (2025-06)
    Unveiling Additive Effects in 3D Printed Geopolymer Composites:
    A Multi-Scale Analysis Coupling Rheological Insights and CFD-Optimized Deposition
  64. Shi Anqi, Lee Kah, Bo Sun, Koh Weng et al. (2025-06)
    Dimensional Effects on Shear Behaviour of 3D-Printed Concrete Shear Keys
  65. Sun Yan, Du Guoqiang, Deng Xiaowei, Qian Ye (2025-06)
    Effects of Nozzle Thickness on the Mechanical Properties of 3D Printable Ultra-High Performance Strain-Hardening Cementitious Composites (UHP-SHCC)
  66. Kim Tae, Oh Sangwoo, Lee Jinsuk, Dong Won-Jun et al. (2025-05)
    Effects of 3D-Printed Concrete Permanent Formwork on the Flexural Behavior of Reinforced Concrete Beams:
    Experimental and Analytical Investigations
  67. Zhu Xingyi, Anwar Muhammad, Deng Guomin, Wang Xiaoming et al. (2025-05)
    Effect of Microwave Heating Under Varying Exposure Conditions on Rheological Properties, Interlayer Bond and Buildability Performance of 3D-Printed Geopolymer
  68. Nieświec Martyna, Chajec Adrian, Šavija Branko (2025-05)
    Effect of Ground Copper Slag on the Fresh Properties of 3d Printed Cementitious Composites
  69. Cai Lixiong, Chen Feida, Xie Dingkun, Ye Keming (2025-05)
    Time-Varying Work Performance of Cementitious 3D Printing Mortar:
    Effect of SAC, H-PC and HPMC
  70. Mukhtar Faisal (2025-05)
    3D-Printed Concrete Fracture:
    Effects of Cohesive Laws, Mixes, and Print Parameters in 3D EXtended FEM
  71. Chen Zhaohui, Yue Ziyi, Gerong Wangdui, Wang Zhenyue et al. (2025-05)
    Effect of Orthotropy and Printing Patterns on the Bending Performance of 3D Printed Concrete Grid Components
  72. Kuang Hao, Deng Yang, Wang Dong, Jian Shouwei et al. (2025-05)
    Strengthening Effect of In-Situ Sprayed UV-Curable Polyurethane-Acrylate Resin Coating on Slag-Based 3D Printing Concrete
  73. Khanverdi Mohsen, Das Sreekanta (2025-05)
    Performance of Full-Scale 3D-Printed Concrete Walls:
    Effects of Vertical Reinforcements and Window Opening
  74. Kaya Ebru, Ciza Baraka, Yalçınkaya Çağlar, Felekoğlu Burak et al. (2025-05)
    A Comparative Study on the Effectiveness of Fly Ash and Blast Furnace Slag as Partial Cement Substitution in 3D Printable Concrete
  75. Yang Guojun, Weng Yiwei, Tian Jiefu, Yang Zhenjun (2025-05)
    3D Printing Towards Cost-Effective Design of Composite UHPFRC Beams:
    Effects of Fiber Distribution and Orientation on Flexural Performances and Failure Mode Transition
  76. An Dong, Rahman Mahfuzur, Zhang Y., Yang Chunhui (2025-05)
    Effects of Key 3D Concrete Printing Process Parameters on Layer Shape:
    Experimental Study and Smooth Particle Hydrodynamics Modelling
  77. Zhao Herui, Jiang Quan, Xia Yong, Hou Dongqi et al. (2025-04)
    Microbial-Induced Calcareous Precipitation Effect on Tensile Strength and Early Age Shrinkage of 3D Printed Concrete
  78. Beigh Mirza, Signorini Cesare, Rauf Asim, Schröfl Christof et al. (2025-04)
    Intrinsic Rheological Behavior of Limestone Calcined Clay Cementitious (LC3) Binders for Automated Construction:
    Effect of Calcium Sulfate Varieties
  79. Xiong Baocheng, Liu Huanbao, Nie Ping, Li Xiaoxi et al. (2025-04)
    Effect of Different Surface Modification Methods of Small Particle Size Recycled Rubber Powder on Mechanical Properties of 3D Printed Concrete
  80. Temirzakuly Bakbergen, Nurgaliuly Dias, Kim J., Shehab Essam et al. (2025-04)
    Development of Cost-Effective Geopolymer Mortars from Low-Grade Metakaolin and Bottom Ash for 3D Construction Printing
  81. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
    Effect of Nozzle Stand-Off Distance, Printing Interval, and Inclusion of Glass Fiber Mesh Reinforcement in 3D Printed Concrete
  82. Over Derya, Ozbakan Nesil (2025-04)
    Effect of Recycled Aggregate Use on the Fresh State Properties of Limestone Calcined Clay Cement (LC3) Mortars
  83. Yassin Ahmed, Hafez Mohamed, Aboelhassan Mohamed (2025-04)
    Experimental and Numerical Investigation on the Effect of Different Types of Synthetic Fibers on the Flexure Behavior and Mechanical Properties of 3D Cementitious Composite Printing Provided with Cement CEM II/A-P
  84. Liu Xiongfei, Yang Xiaojie, Sun Yuhang (2025-04)
    Synchronous Construction of Spray-Based 3D Printed Reinforced Concrete Structure:
    Effect of 2.5D Rebar Structure on the Flexural Performance of Slab
  85. Nieświec Martyna, Chajec Adrian (2025-03)
    Effect of Materials on the Properties of Fresh Cementitious Composites for 3D Printing:
    Short Review
  86. Li Hualong, Shi Ye, Rong Hui, Dai Kaichao (2025-03)
    Effect of Additives on the Performance of 3D-Printing Ultra-High Performance Concrete
  87. Zat Tuani, Schuster Sílvio, Schmitt Duarte Ester, Freitas Daudt Natália et al. (2025-03)
    Rheological Properties of High-Performance Concrete Reinforced with Microfibers and Their Effects on 3D Printing Process
  88. Araújo Rísia, Martinelli Antônio, Cabral Kleber, Nunes Ueslei et al. (2025-03)
    Effect of Lightweight Expanded Clay Aggregate (LECA) On the Printability of Cementitious Compositions for 3D Printing
  89. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2025-02)
    Effect of Air-Entraining Agent on Hardened Properties of 3D Printed Concrete with Emphasis on Permeability and Air Void Structure
  90. Liu Chao, Liu Huawei, Wu Yiwen, Wu Jian et al. (2025-02)
    Effect of X-Ray CT Characterized Pore Structure on the Freeze-Thaw Resistance of 3D Printed Concrete with Recycled Coarse Aggregate
  91. Xia Zhenjiang, Geng Jian, Zhou Zhijie, Liu Genjin (2025-01)
    Comparative Analysis of Polypropylene, Basalt, and Steel Fibers in 3D Printed Concrete:
    Effects on Flowability, Printabiliy, Rheology, and Mechanical Performance
  92. Wang Yibo, Yan Ming, Yang Kun, Ao Chenyang et al. (2025-01)
    Effect of Wall-Slip on the Extrusion-Characteristics of 3D Printing of Cementitious Materials
  93. Shazad Qamar, Li Fangyuan (2025-01)
    Interfacial Bond-Effects on Shear-Strength and Damage in 3D Printed Concrete Structures:
    A Combined Experimental and Numerical Study
  94. Vargas Armando, Robayo-Salazar Rafael, Gutiérrez Ruby (2024-12)
    Effects of Incorporating Fine Aggregates and Polypropylene-Micro-Fibers on the Cracking-Control of 3D Printed Cementitious Mixtures
  95. Zhao Zhihui, Cai Xianhuan, Chen Fan, Gong Yongfan et al. (2024-12)
    Effect of Wollastonite-Content on Rheology and Mechanical Properties of 3D Printed Magnesium-Potassium-Phosphate-Cement-Based Material of MgO-SiO2-K2HPO4
  96. Gurunandan M., Mala Hiranya, Nanthagopalan Prakash (2024-12)
    Effect of Water-to-Binder, Aggregate-to-Binder-Ratio and Admixtures on Printability and Mechanical Properties of 3D Printable Mortar Mixtures
  97. Latha P., Shanmugavelu V., Tamilmani A., Thayalnayaki D. et al. (2024-12)
    Evaluating 3D Concrete Printing Effectiveness Through a Comparative Study Using SVM, Decision Trees, and Random Forest Techniques
  98. Glotz Theresa, Rasehorn Inken, Petryna Yuri (2024-12)
    Mechanical Behavior of Hardened Printed Concrete and the Effect of Cold Joints:
    An Experimental Investigation
  99. Luo Surong, Li Wenqiang, Cai Yili, Zhang Kaijian (2024-12)
    Effects of Carbonated Recycled Sand on the Interfacial Bonding Performance of 3D Printed Cement-Based Material
  100. Kaya Ebru, Ciza Baraka, Yalçınkaya Çağlar, Felekoğlu Burak et al. (2024-11)
    Effect of Hydroxypropyl-Methylcellulose and Aggregate Volume on Fresh and Hardened Properties of 3D Printable Concrete
  101. Wu Mushuang, Wang Zixiao, Chen Yuxuan, Zhu Mengyu et al. (2024-11)
    Effect of Steel-Slag on Rheological and Mechanical Properties of Sulfoaluminate-Cement-Based Sustainable 3D Printing Concrete
  102. Han Xiaoyu, Yan Jiachuan, Huo Yanlin, Chen Tiefeng (2024-11)
    Effect of Carbonation-Curing-Regime on 3D Printed Concrete:
    Compressive Strength, CO2 Uptake, and Characterization
  103. Ding Yahong, Tong Jiaqi, Zhang Meixiang, Guo Shuqi et al. (2024-11)
    Effect of Aggregate Gradation on the Properties of 3D Printed Recycled Coarse Aggregate Concrete
  104. You Dengyu, Kashani Alireza (2024-11)
    Effect of Environmental Conditions on Shrinkage-Induced Cracking of 3D Printed Mortar
  105. Li L., Fang Z., Chu S., Kwan Albert (2024-11)
    Improving Mechanical Properties of 3D Printed Mortar by Exploiting Synergistic Effects of Fly-Ash-Microsphere and Nano-Silica
  106. Zhi Zhenzhen, Guo Yanfei, Qi Huahui, Tan Hongbo et al. (2024-11)
    Effect of Alkali-Metal-Sulfates on Hydration Properties of Alpha-Calcium-Sulfate-Hemihydrate for 3D Printing
  107. Yang Yekai, Zhang Chiyu, Liu Zhongxian, Dong Liang et al. (2024-10)
    Effect of Hydration Process on the Inter-Layer Bond Tensile Mechanical Properties of Ultra-High-Performance Concrete for 3D Printing
  108. Li Zhengrong, Xing Wenjing, Wang Heyu, Sun Jingting (2024-10)
    The Effect of Heterogeneous Geometry on Steady-State Heat Transfer in Extrusion-Based 3D Printed Structures
  109. Chamatete Kunda, Yalçınkaya Çağlar (2024-10)
    Numerical Assessment of Thermal Bridging Effects in 3D Printed Foam-Concrete Walls
  110. Sorgenfrei Reese, Zandifaez Peyman, Zhou Hongyu, Fiske Michael (2024-10)
    Investigating the Effect of Air-Voids on the Mechanical Properties of 3D Printable Cementitious Composites
  111. Park Keunhyoung, Memari Ali, Hojati Maryam, Radlińska Aleksandra et al. (2024-10)
    Effects of Anisotropic Mechanical Behavior on Nominal Moment Capability of 3D Printed Concrete Beam with Reinforcement
  112. Ma Wei, Wang Guosheng, Zhou Yaya, Xu Qinghu et al. (2024-09)
    Polyacrylonitrile-Fiber-Reinforced 3D Printed Concrete:
    Effects of Fiber Length and Content
  113. Samrani Phebe, Cao Yifang, Fimbres-Weihs Gustavo, Sanjaya Eric et al. (2024-09)
    Effect of Fly-Ash and Ground Waste Glass as Cement Replacement in Concrete 3D Printing for Sustainable Construction
  114. Tang Hong, Xiong Shiqi (2024-09)
    Comparative Analysis of Carbon-Emission Accounting and Carbon-Reduction-Effect of 3D Printed Concrete Structures at the Stage of Architecturalization
  115. Shahib Al Bari M., Ekaputri Januarti (2024-09)
    The Effect of Fiber on the Green Strength and Buildability of High-Strength 3D Printing Concrete
  116. Chajec Adrian, Šavija Branko (2024-09)
    The Effect of Using Surface Functionalized Granite-Powder-Waste on Fresh Properties of 3D Printed Cementitious Composites
  117. Liu Xuelin, Sheng Haitao, Feng Binqing, Zhao Piqi et al. (2024-09)
    Effect of Potassium and Sodium-Based Electrolyzed Water on the Rheological Properties and Structural Build-Up of 3D Printed Cement Composites
  118. Straßer Alexander, Haynack Alexander, Kränkel Thomas, Gehlen Christoph (2024-09)
    Additive Manufacturing by the Selective Paste-Intrusion:
    Effect of the Distance of the Print Nozzle to the Particle-Bed on the Print Quality
  119. Wang Xianggang, Dong Enlai, Jia Zijian, Jia Lutao et al. (2024-09)
    Specimen-Size-Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water-to-Binder-Ratios
  120. Nikravan Ata, Aydin Tolga, Özyurt Nilüfer, Bundur Zeynep (2024-09)
    Enhancing the Performance of 3D Printed Fiber-Reinforced Mortar:
    Synergistic Effects of Clays and Bacterial Cells as Viscosity-Modifying-Agents
  121. Sovetova Meruyert, Calautit John (2024-09)
    Effect of the Printing Process on Thermal Performance of 3D Printed Structures
  122. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-09)
    Effect of Strain-Hardening Material on Seismic-Performance of 3D Printed Concrete Wall:
    A Numerical Study
  123. Mahmoudi Matineh, Wangler Timothy, Flatt Robert (2024-09)
    Robustness of Digital Concrete:
    Effects of Temperature, Accelerator Type and Dosage
  124. Keita Emmanuel, Zuo Wenqiang, Caneda-Martínez Laura, Aimedieu Patrick et al. (2024-09)
    X-Ray Tomography Insights into Early Drying Effects in 3D Concrete Printing
  125. Nakase Kota, Hashimoto Katsufumi, Sugiyama Kentaro, Mori Hiroaki et al. (2024-09)
    Effect of Printing Parameters on Print Quality and Fracture Propagation Behavior of 3D Printed Concrete
  126. Zargayouna Habib, Paquet Elodie, Mabrouki Tarek, Hamdi Essaieb et al. (2024-09)
    Analysis of the Effect of Substituting Cement with Marble-Powder on the Mortar Characteristics Used in 3D Printing
  127. Barbosa Marcella, Anjos Marcos, Maia José, Camões Aires et al. (2024-09)
    Effect of Expanded Perlite on the Properties of 3DCP Mixtures
  128. Freund Niklas, David Martin, Dröder Klaus, Lowke Dirk (2024-09)
    Vibrated Short Rebar Insertion:
    The Effect of Integration Time on the Resulting Bond Quality
  129. Foiles Dreycen, Negron-McFarlane Christian, Kreiger Eric, Kreiger Megan (2024-09)
    The Effect of Coarse/Fine Aggregate Ratios on the Properties of Additively Constructed Concrete
  130. Mezhov Alexander, Robens-Radermacher Annika, Unger Jörg, Schmidt Wolfram (2024-09)
    Effect of the Ambient Temperature on the Structural Build-Up of 3D Printed Concrete:
    Experimental and Modelling Study
  131. Kobayashi Noriyuki, Asakawa Tomoya, Nishiwaki Tomoya, Egawa Ryo et al. (2024-09)
    An Automated Pin Insertion Method for 3DCP and Its Reinforcement Effects on Beam Specimens
  132. Jiang Yu, Tabbaa Abir, Daly Ronan (2024-09)
    Effects of Time-Dependent Rheological Properties of Cementitious Materials on the Print Quality of Extrusion-Based 3D Printing
  133. Mudadu Antonio, Giulivo Marco, Menna Costantino (2024-09)
    The Effect of Printing-Path on the Shear Behavior of 3D Printed Concrete Panels Under Diagonal Compression-Test
  134. Anjos Marcos, Maia José, Souza Dias Leonardo, Medeiros Fernanda et al. (2024-09)
    Effect of the Geometry of Representative Volumetric Masonry Elements:
    Experimental and Numerical Analysis
  135. Park Gwang, Kim Jae (2024-09)
    Optimization Shape Stability for Printed Pre-Cast Column Using Matric-Suction-Effect
  136. Ma Liangzhu, Yin Deshun, Ren Jiangtao, Tian Mingyuan et al. (2024-09)
    An Effective Thixotropic Structural-Dynamics Rheological-Model for 3D Printed Concrete Materials in the Flow-State
  137. Hou Shaodan, Wu Wenbo, Duan Zhenhua, Zhou Shuai et al. (2024-09)
    Rheology of Fiber-Reinforced Mortar for 3D Printing Construction:
    Effect of Recycled Hybrid-Powder and Polyethylene-Fiber
  138. Bolhassani Damon, Yavartanoo Fahimeh, Tapia Javier, Akbarzadeh Masoud et al. (2024-08)
    The Effect of Post-Tensioning on the Behavior of Small-Scale 3D Printed Concrete Beams
  139. Fernand Muhirwa, Li Yaqi, Qian Qiwei, Chi Yin et al. (2024-08)
    Effects of Coarse Aggregates on 3D Printability and Mechanical Properties of Ultra-High-Performance Fiber-Reinforced Concrete
  140. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2024-08)
    Effect of Pumping Process on the Properties of 3D Printed Concrete Containing Air-Entraining-Agent
  141. Robayo-Salazar Rafael, Muñoz Miguel, Vargas Armando, Gutiérrez Ruby (2024-08)
    Effects of Incorporating Bentonite, Metakaolin, Microsilica, and Calcium-Carbonate on the Rheological Properties of Portland-Cement-Based 3D Printing Inks
  142. Tanyildizi Harun, Seloglu Maksut, Coskun Ahmet (2024-08)
    The Effect of Nano-Zinc-Oxide on Freeze-Thaw-Resistance of 3D Printed Geopolymer Mortars
  143. Li Leo, Zhang Guang-Hu (2024-08)
    Feasibility of Underwater 3D Printing:
    Effects of Anti-Washout-Admixtures on Printability and Strength of Mortar
  144. Prathipati S., Vardhan J., Murali D., Nithin C. et al. (2024-08)
    An Experimental Study on the Effect of a Viscosity-Modifying-Agent on the Rheological and Strength Behavior of 3D Printed Concrete
  145. Srinivas Dodda, Ventrapragada Durga, Panda Biranchi, Sitharam Thallak (2024-07)
    A Study on the Effect of Mixture Constituents on Washout-Resistance, Mechanical, and Transport Properties in the Context of Underwater 3D Concrete Printing
  146. Givkashi Mohammad, Tohidloo Mohammad (2024-07)
    The Effect of Freeze-Thaw-Cycles and Sulfuric-Acid-Attack Separately on the Compressive Strength and Microstructure of 3D Printed Air-Entrained Concrete
  147. Liu Zhenbang, Li Mingyang, Liu Zhixin, Wong Teck (2024-07)
    Effects of Vinyl-Acetate and Ethylene-Copolymer on Printing and Mechanical Performances of 3D Printing Cementitious Materials
  148. Sahana C., Soda Prabhath, Dwivedi Ashutosh, Kumar Sandeep et al. (2024-07)
    3D Printing with Stabilized Earth:
    Material-Development and Effect of Carbon-Sequestration on Engineering-Performance
  149. Zhang Yiyuan, Lesage Karel, Zhang Yi, Tao Yaxin et al. (2024-07)
    Effect of Magnetic Intervention-Time on the Buildability of Printable Cement and Limestone-Pastes Containing Fe3O4-Particles
  150. Barve Prasad, Bahrami Alireza, Shah Santosh (2024-07)
    A Comprehensive Review on Effects of Material-Composition, Mix-Design, and Mixing-Regimes on Rheology of 3D Printed Geopolymer Concrete
  151. He Lewei, Chen Bingzhi, Liu Qimin, Chen Hao et al. (2024-07)
    A Quasi-Exponential Distribution of Interfacial Voids and Its Effect on the Inter-Layer Strength of 3D Printed Concrete
  152. Wang Jun, Zhang Xuanzheng, Liu Zhenhua, Zhao Jiasheng (2024-07)
    Study on the Effects of Printing Process and Reinforcement Materials on the Performance of 3D-Printed Glass Bead Insulation Mortar
  153. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
    Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
  154. Gu Yucun, Khayat Kamal (2024-06)
    Effect of Superabsorbent Polymer on 3D Printing Characteristics as Rheology-Modified-Agent
  155. Kilic Ugur, Soliman Nancy, Omran Ahmed, Ozbulut Osman (2024-06)
    Effects of Cellulose Nanofibrils on Rheological and Mechanical Properties of 3D Printable Cement Composites
  156. Du Jiashuai, Wei Yazhi, Zhang Hui, Idriss Aboubaker (2024-06)
    Effects of Oyster-Shell-Derivatives on Performance Enhancement of Biomass-Based 3D Printed Concrete
  157. Zhi Peng, Wu Yuching, Bai Meiyan (2024-06)
    Determining the Effect of Geometric and Dynamic Properties of Screws on Fiber-Orientation During FRC 3D Printing Based on Discrete Element Simulation
  158. Gu Yucun, Zheng Shuyi, Ma Hongyan, Long Wujian et al. (2024-05)
    Effect of Absorption Kinetics of Superabsorbent Polymers on Printability and Inter-Layer Bond of 3D Printing Concrete
  159. Shoaei Parham, Kjøniksen Anna-Lena, Pamies Ramón, Pilehvar Shima (2024-05)
    Characterization of 3D Printable Geopolymer Mortars:
    Effect of Binder Composition and Basalt-Fiber-Reinforcement
  160. Liu Zhenbang, Li Mingyang, Wong Teck, Tan Ming (2024-05)
    Determine the Effects of Pore Properties on the Mechanical Performances of 3D Concrete Printing Units with Experimental and Numerical Methods
  161. Yan Kang-Tai, Li Lingzhi, Ye Junhong, Bazarov Dilshod et al. (2024-05)
    Anisotropic Size-Effect of 3D Printed LC3-Based Engineered Cementitious Composites
  162. Du Guoqiang, Qian Ye (2024-05)
    Effects of Printing-Patterns and Loading-Directions on Fracture Behavior of 3D Printed Strain-Hardening Cementitious Composites
  163. Salari Farid, Zocca Andrea, Bosetti Paolo, Hlaváček Petr et al. (2024-05)
    Powder-Bed 3D Printing by Selective Activation of Magnesium-Phosphate-Cement:
    Determining Significant Processing Parameters and Their Effect on Mechanical Strength
  164. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2024-05)
    Effect of Time Interval on the Inter-Layer Adhesion of 3D Printed Concrete with Recycled Sand:
    Multi-Factor Influencing Mechanisms and Superabsorbent Polymer Enhancement
  165. Chen Anguo, Dai Pengfei, Lyu Qifeng (2024-05)
    Effect of Alkalized Straw-Fibers on the Properties of Three Dimensional Printed Cementitious Composite
  166. Boddepalli Uday, Gandhi Indu, Panda Biranchi (2024-05)
    Synergistic Effect of Fly-Ash and Polyvinyl-Alcohol-Fibers in Improving Stability, Rheology, and Mechanical Properties of 3D Printable Foam-Concrete
  167. Salaimanimagudam M., Jayaprakash Jaganathan (2024-04)
    Effect of Introducing Dummy Layers on Inter-Layer Bonding and Geometrical Deformations in Concrete 3D Printing
  168. Yang Yekai, Lu Pengyuan, Liu Zhongxian, Dong Liang et al. (2024-04)
    Effect of Steel-Fiber with Different Orientations on Mechanical Properties of 3D Printed Steel-Fiber-Reinforced Concrete:
    Meso-Scale Finite-Element-Analysis
  169. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2024-04)
    Mitigation of Lack-of-Fusion in 3D Printed Limestone-Calcined-Clay-Cement Concrete Induced by Effective Micro-Organisms
  170. Sun Bochao, Dominicus Randy, Dong Enlai, Li Peichen et al. (2024-04)
    Predicting the Strength Development of 3D Printed Concrete Considering the Synergistic Effect of Curing-Temperature and Humidity:
    From Perspective of Modified Maturity-Model
  171. Corso Marla, Silva Maicon, Cardoso Flávia, Heck Stenio et al. (2024-04)
    Effect of the Addition of Graphite and Graphene-Oxide in the Mechanical Properties and Adsorption of CO2 in Cementitious Filaments
  172. Chamatete Kunda, Yalçınkaya Çağlar (2024-03)
    Numerical Evaluation on Thermal Performance of 3D Printed Concrete Walls:
    The Effects of Lattice-Type, Filament-Width and Granular-Filling-Material
  173. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo, Castano-Alvarez Ruben (2024-03)
    Effects of 3D Printing on the Tensile Splitting Strength of Concrete Structures
  174. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
    Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
  175. İlcan Hüseyin, Külak Adnan, Şahmaran Mustafa (2024-03)
    3D Printable Construction and Demolition Waste-Based Geopolymer:
    Investigating the Effects of Additives on Engineering Properties
  176. Skibicki Szymon, Szewczyk Piotr, Majewska Julia, Sibera Daniel et al. (2024-03)
    The Effect of Inter-Layer Adhesion on Stress-Distribution in 3D Printed Beam Elements
  177. Kaliyavaradhan Senthil, Ambily Parukutty, Shekar Deepadharshan, Sebastian Shilpa (2024-02)
    Effect of Sand-Gradations on the Fresh Properties of 3D Printable Concrete
  178. Şahin Hatice, Mardani Ali, Beytekin Hatice (2024-02)
    Effect of Silica-Fume Utilization on Structural Build-Up, Mechanical and Dimensional Stability Performance of Fiber-Reinforced 3D Printable Concrete
  179. Zeng Jun-Jie, Yan Zitong, Jiang Yuan, Li Pei-Lin (2024-02)
    3D Printing of FRP Grid and Bar Reinforcement for Reinforced Concrete Plates:
    Development and Effectiveness
  180. Jia Lutao, Jia Zijian, Zhang Zedi, Tang Zhenzhong et al. (2024-02)
    Effect of Recycled Brick-Powder with Various Particle-Features on Early-Age Hydration, Water-State, and Rheological Properties of Blended Cement-Paste in the Context of 3D Printing
  181. Li Weihong, Chen Xuhao, Wang Yaoyu, Wan Detian et al. (2024-02)
    Effect of Embedded Filament Fibers on Mechanical Properties of 3D Printing Cement-Based Materials
  182. Dulaj Albanela, Salet Theo, Lucas Sandra (2024-01)
    A Study of the Effects of MWCNTs on the Fresh and Hardened State Properties of 3D Printable Concrete
  183. Chen Kailun, Liu Qiong, Chen Bing, Zhang Shishun et al. (2024-01)
    A Review on Effect of Raw Materials on the Performance of 3D Printed Geopolymer System for Construction
  184. Dai Pengfei, Lyu Qifeng, Zong Meirong, Zhu Pinghua (2024-01)
    Effect of Waste-Plastic-Fibers on the Printability and Mechanical Properties of 3D Printed Cement Mortar
  185. Lucen Hao, Long Li, Shipeng Zhang, Huanghua Zhang et al. (2023-12)
    The Synergistic Effect of Greenhouse Gas CO2 and Silica-Fume on the Properties of 3D Printed Mortar
  186. Straßer Alexander, Kränkel Thomas, Gehlen Christoph (2023-12)
    Integrating Wire Arc Additive Manufacturing into Selective Paste-Intrusion for Reinforced Concrete Elements:
    Effect of Temperature on the Mechanical Performance
  187. Böhler David, Freund Niklas, Mai (née Dressler) Inka, Lowke Dirk (2023-12)
    Shotcrete 3D Printing:
    Effect of Material‐Process-Interaction on the Global and Local Material Density
  188. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2023-12)
    Effect of Grain-Size and Layer-Thickness on Hardened State Properties in Selective Cement-Activation
  189. Wu Yuching, Chen Huaikun, Zhi Peng, Zhu Peng et al. (2023-12)
    Effect of 3D Printing Geometrical Monocline on Behaviors of Curved Timoshenko Beams Based on Isogeometric Analyses
  190. Carvalho Ivo, Melo Abcael, Melo Carlos, Brito Mateus et al. (2023-12)
    Evaluation of the Effect of Rubber-Waste-Particles on the Rheological and Mechanical Properties of Cementitious Materials for 3D Printing
  191. Põldaru Mattias, Tammkõrv Karl, Tusik Tanel, Kiviste Mihkel et al. (2023-11)
    The Effect of Printing-Direction on the Strength Characteristics of a 3D Printed Concrete Wall-Section
  192. Zhi Peng, Wu Yuching, Rabczuk Timon (2023-11)
    Effects of Time-Varying Liquid Bridge Forces on Rheological Properties, and Resulting Extrudability and Constructability of Three-Dimensional Printing Mortar
  193. Xu Ping, Chen Tianyu, Fan Kaijun, Zhang Minxia (2023-11)
    Effect of Nano-Silica-Sol Dosage on the Properties of 3D Printed Concrete
  194. Tong Jiaqi, Ding Yahong, Lv Xiuwen, Ning Wei (2023-11)
    Effect of Carbonated Recycled Coarse Aggregates on the Mechanical Properties of 3D Printed Recycled Concrete
  195. Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2023-10)
    Geopolymer Mortars for Use in Construction 3D Printing:
    Effect of LSS, Graphene-Oxide and Nano-Clay at Different Environmental Conditions
  196. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2023-10)
    The Effect of Curing Conditions on the Service Life of 3D Printed Concrete Formwork
  197. Markin Slava, Mechtcherine Viktor (2023-10)
    The Effect of Layer Cross-Section on Plastic Shrinkage Cracking of 3D Printed Concrete Elements
  198. Ye Junhong, Yang Minxin, Yu Jiangtao, Dai Yecheng et al. (2023-10)
    Size-Effect on Flexural and Fracture Behaviors of 3D Printed Engineered Cementitious Composites:
    Experimental and Numerical Studies
  199. Kumar Lalit, Panda Biranchi, Muthu Nelson (2023-10)
    A Simple Potential Energy Formulation for 3D Concrete Printed Structures Considering the Shear Effects in the Build-Direction
  200. Wang Shih-Yuan, Liong Sze-Teng, Gan Y., Sheng Yu-Ting (2023-10)
    Cost-Effective Concrete Fabrication for Large Irregularly Shaped Architectural Structures
  201. Freund Niklas, Dörrie Robin, David Martin, Kloft Harald et al. (2023-10)
    Enclosing Reinforcement Structures in Shotcrete 3D Printing:
    The Effect of Reinforcement Geometry and Accelerator Dosage on the Formation of Voids
  202. Overmeir Anne, Šavija Branko, Bos Freek, Schlangen Erik (2023-09)
    Effects of 3D Concrete Printing Phases on the Mechanical Performance of Printable Strain-Hardening Cementitious Composites
  203. David Martin, Freund Niklas, Dröder Klaus, Lowke Dirk (2023-09)
    The Effects of Nozzle-Diameter and Length on the Resulting Strand Properties for Shotcrete 3D Printing
  204. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2023-09)
    Effect of Nano-Clay on the Printability of Extrusion-Based 3D Printable Mortar
  205. Zhang Huan, Cao Shuai, Yilmaz Erol (2023-09)
    Polymer Shape Effect on Damage-Evolution, Internal Defects and Crack Propagation of 3D Printed Polymer-Based Cementitious Backfill
  206. Cuevas Villalobos Karla, Weinhold Joachim, Stephan Dietmar, Kim Ji-Su (2023-09)
    Effect of Printing-Patterns on Pore-Related Microstructural Characteristics and Properties of Materials for 3D Concrete Printing Using In-Situ and Ex-Situ Imaging-Techniques
  207. Yin Yunchao, Huang Jian, Wang Tiezhu, Yang Rong et al. (2023-09)
    Effect of Hydroxypropyl-Methylcellulose on Rheology and Printability of the First Printed Layer of Cement Activated Slag-Based 3D Printing Concrete
  208. Liu Yi, Wang Li, Yuan Qiang, Peng Jianwei (2023-09)
    Effect of Coarse Aggregate on Printability and Mechanical Properties of 3D Printed Concrete
  209. Li Te, Tier Laire (2023-09)
    Analysis of the Effect of Glass-Powder on the Printability of Cement-Based Materials for 3D Printing Using ImageJ
  210. Jia Zijian, Zhang Zedi, Jia Lutao, Cao Ruilin et al. (2023-09)
    Effect of Different Expansive Agents on the Early-Age Structural Build-Up Process of Cement-Paste
  211. Li Leo, Xiao Bofeng, Cheng Cong-Mi, Xie Hui-Zhu et al. (2023-09)
    Adding Glass-Fibers to 3D Printable Mortar:
    Effects on Printability and Material-Anisotropy
  212. Liu Xiaoshuang, Zou Yuxiao, Wu Yingxuan, Cui Dong et al. (2023-09)
    The Effect of U-Type Expanding Agent for Concrete (UEA) on the Microstructural and Mechanical Properties of Mortar Fabricated Through Alternate 3D Printing
  213. Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
    Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
    Effect of Operational- and Material-Oriented Parameters
  214. Matos Paulo, Zat Tuani, Lima Marcelo, Neto José et al. (2023-08)
    Effect of the Superplasticizer-Addition Time on the Fresh Properties of 3D Printed Limestone-Calcined-Clay-Cement (LC³) Concrete
  215. Surehali Sahil, Tripathi Avinaya, Neithalath Narayanan (2023-08)
    Anisotropy in Additively Manufactured Concrete Specimens Under Compressive Loading:
    Quantification of the Effects of Layer-Height and Fiber-Reinforcement
  216. Du Longyu, Zhou Jiehang, Lai Jianzhong, Wu Kai et al. (2023-07)
    Effect of Pore-Structure on Durability and Mechanical Performance of 3D Printed Concrete
  217. Harbouz Ilhame, Rozière Emmanuel, Loukili Ahmed, Yahia Ammar (2023-07)
    Effect of the Structuration-Rate on Dimensional Stability and Mechanical Performance of 3D Printed Mortars
  218. Ghosh Debalina, Anleu Paula, Pape Yann, Ma Zhonggoue (2023-07)
    Effect of Inter-Layer-Time-Lapse and Workability-Retention on Printed Concrete Performance
  219. Kanyenze Simba, Joubert Dawid, Combrinck Riaan (2023-07)
    The Effect of Nanobubble Water on the Fresh Properties of Conventional Concrete and 3D Printing Concrete
  220. Khan Shoukat, İlcan Hüseyin, Aminipour Ehsan, Şahin Oğuzhan et al. (2023-07)
    Buildability-Analysis on Effect of Structural Design in 3D Concrete Printing:
    An Experimental and Numerical Study
  221. Wang Fei, Hua Sudong, Chen Tingzhu, He Bijuan et al. (2023-07)
    Effect of Nano-Clay and PCE on the Buildability of Ultra-Fine Dredged Sand-Based 3D Printing Materials
  222. Jaji Mustapha, Kamoru A., Zijl Gideon, Babafemi Adewumi (2023-07)
    Effect of Anisotropy on Permeability Index and Water-Absorption of 3D Printed Metakaolin-Based Geopolymer Concrete
  223. Ghantous Rita, Evseeva Anastasiia, Dickey Brandon, Gupta Shashank et al. (2023-07)
    Examining Effect of Printing-Directionality on Freezing-and-Thawing Response of Three-Dimensional-Printed Cement-Paste
  224. Salaimanimagudam M., Jayaprakash Jaganathan (2023-06)
    Effect of Printing Parameters on Inter-Filament Voids, Bonding, and Geometrical Deviation in Concrete 3D Printed Structures
  225. Xu Zhuoyue, Zhang Dawang, Li Hui, Yin Le et al. (2023-06)
    Effects of Additives on the Mechanical Properties, Rheology, and Printing Properties of PCC-Based 3DPMs
  226. Oh Sangwoo, Hong Geuntae, Choi Seongcheol (2023-05)
    Determining the Effect of Superabsorbent Polymers, Macrofibers, and Resting Time on the Rheological Properties of Cement Mortar Using Analysis of Variance:
    A 3D Printing Perspective
  227. Sasikumar Athira, Balasubramanian Dhayalini, Senthil Kumaran M., Govindaraj Vishnuvarthanan (2023-05)
    Effect of Coarse Aggregate Content on the Rheological and Buildability Properties of 3D Printable Concrete
  228. Oh Sangwoo, Choi Seongcheol (2023-05)
    Effects of Superabsorbent Polymers (SAP) On the Rheological Behavior of Cement Mortars:
    A Rheological Study on Performance Requirements for 3D Printable Cementitious Materials
  229. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Muthukrishnan Shravan, Sanjayan Jay (2023-05)
    Effect of Magnetorheological Additives on the Buildability of 3D Concrete Printing
  230. Liu Zhenbang, Li Mingyang, Moo Guo, Kobayashi Hitoshi et al. (2023-05)
    Effect of Nano-Structured Silica-Additives on the Extrusion-Based 3D Concrete Printing Application
  231. Chen Yidong, Zhang Yu, Liu Zhiyong, Zhang Yunsheng et al. (2023-04)
    3D Printed Concrete Permanent Formwork:
    Effect of Post-Cast Concrete Proportion on Interface Bonding
  232. Paul Suvash, Basit Md, Hasan Noor, Dey Dhrutiman et al. (2023-04)
    3D Printing of Geopolymer Mortar:
    Overview of the Effect of Mix-Design and Printing Parameters on the Strength
  233. Wang Youyu, Ma Guowei, Wang Li, Zhang Wengang et al. (2023-04)
    Size-Effects in Cavern-Model-Tests Based on 3D Printing
  234. Kumar Devalla Tharun, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2023-04)
    Investigation on the Flexural and Tensile Performance of 3D Printable Cementitious Mixtures Considering the Effect of Fiber-Distribution
  235. Shakor Pshtiwan, Nejadi Shami, Paul Gavin, Gowripalan Nadarajah (2023-04)
    Effects of Different Orientation-Angle, Size, Surface-Roughness, and Heat-Curing on Mechanical Behavior of 3D Printed Cement-Mortar with and without Glass-Fiber in Powder-Based 3DP
  236. Xu Nuoyan, Qian Ye (2023-04)
    Effects of Fiber-Volume Fraction, Fiber Length, Water-Binder Ratio, and Nano-Clay Addition on the 3D Printability of Strain-Hardening Cementitious Composites
  237. Ramezani Amir, Modaresi Shahriar, Dashti Pooria, Givkashi Mohammad et al. (2023-04)
    Effects of Different Types of Fibers on Fresh and Hardened Properties of Cement and Geopolymer-Based 3D Printed Mixtures:
    A Review
  238. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-03)
    Influence of Effective Micro-Organisms on the Rheology and Fresh State Properties of SCMs-Based Concrete for Digital Fabrication
  239. Kilic Ugur, Ma Ji, Baharlou Ehsan, Ozbulut Osman (2023-03)
    Effects of Viscosity-Modifying Admixture and Nano-Clay on Fresh and Rheo-Viscoelastic Properties and Printability Characteristics of Cementitious Composites
  240. Giridhar Greeshma, Prem Prabhat, Jiao Dengwu (2023-03)
    Effect of Varying Shear Rates at Different Resting Times on the Rheology of 3D Printable Concrete
  241. Dey Dhrutiman, Sahu Akshay, Prakash Srajan, Panda Biranchi (2023-03)
    A Study into the Effect of Material-Deposition-Methods on Hardened Properties of 3D Printed Concrete
  242. Luo Surong, Lin Qian, Xu Wei, Wang Dehui (2023-03)
    Effects of Interval Time and Interfacial Agents on the Mechanical Characteristics of Ultra-High-Toughness Cementitious Composites Under 3D Printed Technology
  243. Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei (2023-02)
    Effects of the Distribution of Solid Particles on the Rheological Properties and Buildability of 3DPM Fresh Pastes with Different FA/GGBFS Content
  244. Pang Zhiming, Lu Cong, Li Baoshan, Wang Jiajie (2023-02)
    A Multi-Scale Model for Quantifying Fiber-Orientation Effects on the Tensile Properties of 3D Printed Engineered Cementitious Composites
  245. Zhao Kang, Hu Zhongjun, Wang Boxin, Li Quanheng et al. (2023-01)
    Effect of Roughness and Adhesive on the Strength of Concrete-to-Concrete Interfaces Cast from 3D Printed Prefabricated Plastic Formworks
  246. Arunothayan Arun, Sanjayan Jay (2023-01)
    Elevated Temperature Effects on 3D Printed Ultra-High-Performance Concrete
  247. Diniz Hugo, Martinelli Antônio, Cabral Kleber, Ferreira Ruan et al. (2023-01)
    Synergistic Effects of the Use of Metakaolin, Sand and Water on the Properties of Cementitious Composites for 3D Printing
  248. Yang Weiyi, Huang Zili, Verma Rupesh, Nguyen Giang et al. (2023-01)
    Effect of Layer-Orientation on Behavior of 3D Printed Rock Specimens in Indirect Tensile Testing
  249. Spuriņa Ella, Šinka Māris, Ziemelis Krists, Bajāre Diāna (2023-01)
    The Effects of 3D Printing on Frost-Resistance of Concrete
  250. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2022-12)
    Effects of Composite Cementation System on Rheological and Working Performances of Fresh 3D Printable Engineered Cementitious Composites
  251. Yang Jun-Mo, Park In-Beom, Lee Hojae, Kwon Hongkyu (2022-12)
    Effects of Nozzle Details on Print Quality and Hardened Properties of Underwater 3D Printed Concrete
  252. Dvorkin Leonid, Konkol Janusz, Marchuk Vitaliy, Huts Andriy (2022-12)
    Effectiveness of Polymer Additives in Concrete for 3D Concrete Printing Using Fly-Ash
  253. Choo Joshua, Mohammed Bashar, Chen Pei-Shan, Abdulkadir Isyaka et al. (2022-12)
    Modeling and Optimizing the Effect of 3D Printed Origami-Bubble-Aggregate on the Mechanical and Deformation Properties of Rubberized ECC
  254. Zhao Yu, Yang Guang, Zhu Lingli, Ding Yahong et al. (2022-10)
    Effects of Rheological Properties and Printing Speed on Molding Accuracy of 3D Printing Basalt-Fiber Cementitious Materials
  255. Spuriņa Ella, Šinka Māris, Ziemelis Krists, Vanags Andris et al. (2022-09)
    The Effects of Air-Entraining Agent on Fresh and Hardened Properties of 3D Concrete
  256. Chougan Mehdi, Ghaffar Seyed, Nematollahi Behzad, Sikora Paweł et al. (2022-09)
    Effect of Natural and Calcined-Halloysite-Clay-Minerals as Low-Cost-Additives on the Performance of 3D Printed Alkali-Activated Materials
  257. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2022-09)
    3D Printing Effect on the Compressive Strength of Concrete Structures
  258. Wu Yun-Chen, Li Mo (2022-09)
    Effects of Early-Age Rheology and Printing Time Interval on Late-Age Fracture Characteristics of 3D Printed Concrete
  259. Cicione Antonio, Kruger Jacques, Mostert Jean-Pierre, Walls Richard et al. (2022-09)
    The Effect of Wind on 3D Printed Concrete Inter-Layer Bond Strength Based on Machine Learning Algorithms
  260. Duan Zhenhua, Li Lei, Yao Qinye, Zou Shuai et al. (2022-08)
    Effect of Metakaolin on the Fresh and Hardened Properties of 3D Printed Cementitious Composite
  261. Wang Zhibin, Jia Lutao, Deng Zhicong, Zhang Chao et al. (2022-08)
    Bond Behavior Between Steel-Bars and 3D Printed Concrete:
    Effect of Concrete Rheological Property, Steel-Bar Diameter and Paste-Coating
  262. Zhang Hongping, Liu Yaling, Cheng Zhi, Zhao Zhiyi (2022-07)
    Effect of Layering Molding Process on Strength of 3D Printed Composite Cement-Based Materials
  263. Tao Jie-Lin, Lin Can, Luo Qiling, Long Wujian et al. (2022-07)
    Leveraging Internal Curing Effect of Fly-Ash-Cenosphere for Alleviating Autogenous Shrinkage in 3D Printing
  264. Yu Shiwei, Sanjayan Jay, Du Hongjian (2022-07)
    Effects of Cement Mortar Characteristics on Aggregate-Bed 3D Concrete Printing
  265. Moelich Gerrit, Rensburg Johannes, Kruger Jacques, Combrinck Riaan (2022-06)
    The Environment’s Effect on the Inter-Layer Bond Strength of 3D Printed Concrete
  266. Herding Friedrich, Mai (née Dressler) Inka, Lowke Dirk (2022-06)
    Effect of Curing in Selective Cement-Activation
  267. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2022-06)
    Evaluating the Effect of Methyl-Cellulose on Hardened State Properties in Selective Cement-Activation
  268. Yuan Qiang, Xie Zonglin, Yao Hao, Huang Tingjie et al. (2022-06)
    Effect of Polyacrylamide on the Workability and Inter-Layer Interface Properties of 3D Printed Cementitious Materials
  269. Lee Jin, Kim Jae (2022-06)
    Matric-Suction and Its Effect on the Shape Stability of 3D Printed Concrete
  270. Jiang Quan, Liu Qiang, Wu Si, Zheng Hong et al. (2022-06)
    Modification Effect of Nano-Silica and Polypropylene-Fiber for Extrusion-Based 3D Printing Concrete:
    Printability and Mechanical Anisotropy
  271. Zhang Hanghua, Xiao Jianzhuang, Duan Zhenhua, Zou Shuai et al. (2022-06)
    Effects of Printing Paths and Recycled Fines on Drying Shrinkage of 3D Printed Mortar
  272. Matos Paulo, Zat Tuani, Corazza Kiara, Fensterseifer Emilia et al. (2022-05)
    Effect of TiO2 Nano-Particles on the Fresh Performance of 3D Printed Cementitious Materials
  273. Ma Guowei, Yan Yufei, Zhang Mo, Sanjayan Jay (2022-05)
    Effect of Steel-Slag on 3D Concrete Printing of Geopolymer with Quaternary Binders
  274. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-05)
    The Theory of Critical Distances to Assess the Effect of Cracks & Manufacturing-Defects on the Static Strength of 3D Printed Concrete
  275. Lee Jin, Kim Jae (2022-05)
    Matric-Suction of Fine Sand and Its Effect on the Shape Stability of 3D Printed Cement Mortar
  276. Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Kamile, Felekoğlu Burak (2022-05)
    Effect of Fiber-Reinforcement on Extrudability and Buildability of Mineral-Additive-Modified Portland-Cement Mortars:
    A Rheometer-Based Simulation-Analysis
  277. Xu Zhuoyue, Zhang Dawang, Li Hui, Sun Xuemei et al. (2022-05)
    Effect of FA and GGBFS on Compressive Strength, Rheology, and Printing Properties of Cement-Based 3D Printing Material
  278. Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria, Hoffmann Marcin et al. (2022-04)
    The Effect of Using Recycled PET-Aggregates on Mechanical and Durability Properties of 3D Printed Mortar
  279. Wang Huan, Tian Xinchen, Wei Huixian, Dai Xueyan et al. (2022-04)
    Effects of Redispersible Latex-Powder on the Performance of 3D Printing Cementitious Materials
  280. Chen Yu, Chang Ze, He Shan, Çopuroğlu Oğuzhan et al. (2022-04)
    Effect of Curing Methods During a Long Time-Gap Between Two Printing Sessions on the Inter-Layer Bonding of 3D Printed Cementitious Materials
  281. Nodehi Mehrab, Ozbakkaloglu Togay, Gholampour Aliakbar (2022-04)
    Effect of Supplementary Cementitious Materials on Properties of 3D Printed Conventional and Alkali-Activated Concrete:
    A Review
  282. Bhattacherjee Shantanu, Santhanam Manu (2022-04)
    Investigation on the Effect of Alkali-Free Aluminium Sulfate-Based Accelerator on the Fresh Properties of 3D Printable Concrete
  283. Chen Yidong, Zhang Yunsheng, Pang Bo, Wang Dafu et al. (2022-04)
    Steel-Fiber Orientational Distribution and Effects on 3D Printed Concrete with Coarse Aggregate
  284. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2022-04)
    Effect of Processing on the Air-Void System of 3D Printed Concrete
  285. Liu Qiang, Jiang Quan, Huang Mojia, Xin Jie et al. (2022-03)
    Modifying Effect of Anionic Polyacrylamide Dose for Cement-Based 3DP Materials:
    Printability and Mechanical Performance Tests
  286. Pan Tinghong, Teng Huaijin, Liao Hengcheng, Jiang Yaqing et al. (2022-03)
    Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials:
    Experimental and Numerical Studies
  287. Zhi Peng, Wu Yuching, Yang Qianfan, Kong Xiangrui et al. (2022-03)
    Effect of Spiral Blade Geometry on 3D Printed Concrete Rheological Properties and Extrudability Using Discrete Event Modeling
  288. Jiang Zhengwu, Yang Qian, Zhu Yanmei, Zhang Yi et al. (2022-03)
    Evaluating the Stiffening Effect of CSA and Sodium Carbonate on the Printability of OPC Mortar
  289. Chen Yuning, Liu Chao, Cao Ruilin, Chen Chun et al. (2022-02)
    Systematical Investigation of Rheological Performance Regarding 3D Printing Process for Alkali-Activated Materials:
    Effect of Precursor Nature
  290. Eugenin Claudia, Navarrete Iván, Brevis Wernher, Lopez Mauricio (2022-02)
    Air-Bubbles as an Admixture for Printable Concrete:
    A Review of the Rheological Effect of Entrained Air
  291. Ji Guangchao, Xiao Jianzhuang, Zhi Peng, Wu Yuching et al. (2022-02)
    Effects of Extrusion-Parameters on Properties of 3D Printing Concrete with Coarse Aggregates
  292. Liu Chao, Xiong Yuanliang, Chen Yuning, Jia Lutao et al. (2022-01)
    Effect of Sulphoaluminate Cement on Fresh and Hardened Properties of 3D Printing Foamed Concrete
  293. Heever Marchant, Plessis Anton, Kruger Jacques, Zijl Gideon (2022-01)
    Evaluating the Effects of Porosity on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
  294. Sukontasukkul Piti, Panklum Kasidet, Maho Buchit, Banthia Nemkumar et al. (2021-12)
    Effect of Synthetic Micro-Fiber and Viscosity-Modifying-Agent on Layer Deformation, Viscosity, and Open-Time of Cement Mortar for 3D Printing Application
  295. Zhou Jiehang, Lai Jianzhong, Du Longyu, Wu Kai et al. (2021-12)
    Effect of Directionally Distributed Steel-Fiber on Static and Dynamic Properties of 3D Printed Cementitious Composite
  296. Xiao Qiyuan, Long Guangcheng, Feng Ruiping, Zeng Xiaohui et al. (2021-12)
    Effect of Alternating Current Field on Rheology of Fresh Cement-Based-Pastes
  297. Cai Jingming, Sheng Zhaoliang, Wang Xiaoyi, Fang Yizhi et al. (2021-12)
    Effect of Reinforcement-Configurations on the Flexural Behaviors of 3D Printed Fiber-Reinforced Cementitious Composite Beams
  298. Nair Sooraj, Li Anling, Mobasher Barzin, Neithalath Narayanan (2021-12)
    Effect of Layer-Height on Tensile Stress-Distribution and Crack-Width and Propagation in 3D Printed Fiber-Reinforced Flexural Elements
  299. Ma Lei, Zhang Qing, Jia Zijian, Liu Chao et al. (2021-11)
    Effect of Drying Environment on Mechanical Properties, Internal RH and Pore-Structure of 3D Printed Concrete
  300. Liu Junli, Li Shuai, Gunasekara Chamila, Fox Kate et al. (2021-11)
    3D Printed Concrete with Recycled Glass:
    Effect of Glass Gradation on Flexural Strength and Microstructure
  301. Zhang Hongping, Wang Jianhong, Liu Yaling, Zhang Xiaoshuang et al. (2021-11)
    Effect of Processing Parameters on the Printing Quality of 3D Printed Composite Cement-Based Materials
  302. Suiker Akke (2021-11)
    Effect of Accelerated Curing and Layer Deformations on Structural Failure During Extrusion-Based 3D Printing
  303. Liu Yu, Jing Rui, Cao Fengze, Yan Peiyu (2021-11)
    Effects of Aggregate Content on Rheological Properties of Lubrication-Layer and Pumping Concrete
  304. Sonebi Mohammed, Dedenis Marie, Abdalqader Ahmed, Perrot Arnaud (2021-11)
    Effect of Red Mud, Nano-Clay, and Natural Fiber on Fresh and Rheological Properties of Three-Dimensional Concrete Printing
  305. Shahmirzadi Mohsen, Gholampour Aliakbar, Kashani Alireza, Ngo Tuan (2021-09)
    Shrinkage Behavior of Cementitious 3D Printing Materials:
    Effect of Temperature and Relative Humidity
  306. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2021-09)
    Examining Layer-Height Effects on the Flexural and Fracture Response of Plain and Fiber-Reinforced 3D Printed Beams
  307. Burger Joris, Wangler Timothy, Chiu Yu-Hung, Techathuvanun Chanon et al. (2021-09)
    Material-Informed Formwork Geometry:
    The Effects of Cross-Sectional Variation and Patterns on the Strength of 3D Printed Eggshell Formworks
  308. Som Debadri, Zanotti Cristina (2021-09)
    Effect of Nano-Additives and Polymeric Viscosity-Modifying-Admixtures (VMA) on the Fresh and Hardened Properties of 3D Printable Concrete Mixtures
  309. Wang Yu, Jiang Yaqing, Pan Tinghong, Yin Kangting (2021-08)
    The Synergistic Effect of Ester-Ether Copolymerization Thixo-Tropic Superplasticizer and Nano-Clay on the Buildability of 3D Printable Cementitious Materials
  310. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2021-08)
    Experimental Calibration and Compensation for the Continuous Effect of Time, Number of Layers and Volume of Material on Shape Deformation in Small-Scale Additive Manufacturing of Concrete
  311. Lv Xuesen, Qin Yao, Liang Hang, Cui Xuemin (2021-07)
    Effects of Modifying-Agent on Rheology and Workability of Alkali-Activated Slag-Paste for 3D Extrusion-Forming
  312. Zhao Zhihui, Chen Mingxu, Zhong Xu, Huang Yongbo et al. (2021-07)
    Effects of Bentonite, Diatomite and Metakaolin on the Rheological Behavior of 3D Printed Magnesium-Potassium-Phosphate-Cement Composites
  313. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2021-06)
    Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete:
    Correction
  314. Tarhan Yeşim, Craveiro Flávio, Bártolo Helena (2021-05)
    An Effective Solution for Reinforcing 3D Concrete Printable Composites
  315. Zhang Hao, Zhu Liming, Zhang Fan, Yang Mijia (2021-04)
    Effect of Fiber Content and Alignment on the Mechanical Properties of 3D Printing Cementitious Composites
  316. Ting Guan, Tay Yi, Tan Ming (2021-04)
    Experimental Measurement on the Effects of Recycled Glass-Cullets as Aggregates for Construction 3D Printing
  317. Sikora Paweł, Chougan Mehdi, Cuevas Villalobos Karla, Liebscher Marco et al. (2021-02)
    The Effects of Nano- and Micro-Sized Additives on 3D Printable Cementitious and Alkali-Activated Composites:
    A Review
  318. Sikora Paweł, Chung Sang-Yeop, Liard Maxime, Lootens Didier et al. (2021-02)
    The Effects of Nano-Silica on the Fresh and Hardened Properties of 3D Printable Mortars
  319. Ye Junhong, Cui Can, Yu Jiangtao, Yu Kequan et al. (2021-02)
    Effect of Polyethylene-Fiber Content on Workability and Mechanical-Anisotropic Properties of 3D Printed Ultra-High-Ductile Concrete
  320. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2021-02)
    Fiber-Orientation Effects on Ultra-High-Performance Concrete Formed by 3D Printing
  321. Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2021-02)
    Effect of Printing Parameters on Material-Distribution in Spray-Based 3D Concrete Printing (S-3DCP)
  322. Rubin Ariane, Hasse Jéssica, Repette Wellington (2021-01)
    The Evaluation of Rheological Parameters of 3D Printable Concretes and the Effect of Accelerating-Admixture
  323. Wu Weiwei, Wang Zhongyu, Ding Shuang, Song Aiping (2021-01)
    Effect Research of Cement Block on Paste-Flow for 3D Cement Printing Based on an Improved Lattice-Boltzmann Method
  324. Vallurupalli Kavya, Farzadnia Nima, Khayat Kamal (2021-01)
    Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements:
    A Review
  325. Pan Tinghong, Jiang Yaqing, He Hui, Wang Yu et al. (2021-01)
    Effect of Structural Build-Up on Inter-Layer Bond Strength of 3D Printed Cement Mortars
  326. Gu Hai, Sun Jianhua, Zhang Jie, Xu Yuanyuan et al. (2020-12)
    Effect of Material-Ratio on the Performances in 3D Cement Printing and Its Optimization
  327. Bohuchval Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud (2020-12)
    Effect of Metakaolin and Natural Fibers on Three-Dimensional Printing Mortar
  328. Cicione Antonio, Mazolwana K., Kruger Jacques, Walls Richard et al. (2020-12)
    Effect of Transverse and Longitudinal Confinement on the Inter-Layer Bond in 3D Printed Concrete at Elevated Temperatures:
    An Experimental Study
  329. Zhang Yi, Jiang Zhengwu, Zhu Yanmei, Zhang Jie et al. (2020-10)
    Effects of Redispersible Polymer-Powders on the Structural Build-Up of 3D Printing Cement Paste with and without Hydroxypropyl-Methylcellulose
  330. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-09)
    Effect of Microwave-Heating on Inter-Layer Bonding and Buildability of Geopolymer 3D Concrete Printing
  331. Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
    Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
    An Experimental and Numerical Study
  332. Bong Shin, Nematollahi Behzad, Arunothayan Arun, Xia Ming et al. (2020-07)
    Effect of Wollastonite Micro-Fiber Addition on Properties of 3D Printable ‘Just-Add-Water’ Geopolymers
  333. Casagrande Lorenzo, Esposito Laura, Menna Costantino, Asprone Domenico et al. (2020-07)
    Mechanical Characterization of Cement-Based Mortar Used in 3DCP Including Early-Age Creep Effects
  334. Pattaje Sooryanarayana Karthik, Stynoski Peter, Lange David (2020-07)
    Effect of Vibration on the Rheology of Concrete for 3D Printing
  335. Matthäus Carla, Back Daniel, Weger Daniel, Kränkel Thomas et al. (2020-07)
    Effect of Cement-Type and Limestone-Powder-Content on Extrudability of Lightweight Concrete
  336. Shakor Pshtiwan, Nejadi Shami, Gowripalan Nadarajah (2020-07)
    Effect of Heat-Curing and E6-Glass Fiber-Reinforcement Addition on Powder-Based 3DP Cement Mortar
  337. Nematollahi Behzad, Bong Shin, Xia Ming, Sanjayan Jay (2020-07)
    Digital Fabrication of ‘Just-Add-Water’ Geopolymers:
    Effects of Curing Condition and Print-Time Interval
  338. Suntharalingam Thadshajini, Nagaratnam Brabha, Poologanathan Keerthan, Hackney Phil et al. (2020-07)
    Effect of Polypropylene-Fibers on the Mechanical Properties of Extrudable Cementitious Material
  339. Wu Yun-Chen, Cotrell Jason, Li Mo (2020-07)
    Inter-Layer Effect on Fracture Behavior of 3D Printing Concrete
  340. Dedenis Marie, Sonebi Mohammed, Amziane Sofiane, Perrot Arnaud et al. (2020-07)
    Effect of Metakaolin, Fly-Ash and Polypropylene-Fibers on Fresh and Rheological Properties of 3D Printing Based Cement Materials
  341. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2020-07)
    Effect of Limestone-Powder Substitution on Fresh and Hardened Properties of 3D Printable Mortar
  342. Hameed Rashid, Papon Aurélie, Perrot Arnaud, Rangeard Damien (2020-07)
    Effect of Metallic Fibers on the Print Quality and Strength of 3D Printed Concrete
  343. Chen Yu, Rodríguez Claudia, Li Zhenming, Chen Boyu et al. (2020-07)
    Effect of Different Grade Levels of Calcined Clays on Fresh and Hardened Properties of Ternary-Blended Cementitious Materials for 3D Printing
  344. He Lewei, Chow Wai, Li Hua (2020-06)
    Effects of Inter-Layer Notch and Shear Stress on Inter-Layer Strength of 3D Printed Cement-Paste
  345. Manikandan Karthick, Jiang Xuepeng, Singh Amit, Li Beiwen et al. (2020-06)
    Effects of Nozzle Geometries on 3D Printing of Clay Constructs:
    Quantifying Contour-Deviation and Mechanical Properties
  346. Federowicz Karol, Kaszyńska Maria, Zieliński Adam, Hoffmann Marcin (2020-06)
    Effect of Curing Methods on Shrinkage Development in 3D Printed Concrete
  347. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-05)
    Effectiveness of the Rheometric Methods to Evaluate the Build-Up of Cementitious Mortars Used for 3D Printing
  348. Albar Abdulrahman, Chougan Mehdi, Kheetan Mazen, Swash Mohammad et al. (2020-04)
    Effective Extrusion-Based 3D Printing System Design for Cementitious-Based Materials
  349. Ivanova Irina, Mechtcherine Viktor (2020-03)
    Effects of Volume Fraction and Surface Area of Aggregates on the Static Yield-Stress and Structural Build-Up of Fresh Concrete
  350. Casagrande Lorenzo, Esposito Laura, Menna Costantino, Asprone Domenico et al. (2020-02)
    Effect of Testing Procedures on Buildability Properties of 3D Printable Concrete
  351. Shakor Pshtiwan, Nejadi Shami, Sutjipto Sheila, Paul Gavin et al. (2020-01)
    Effects of Deposition-Velocity in the Presence-Absence of E6-Glass-Fiber on Extrusion-Based 3D Printed Mortar
  352. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-01)
    The Effect of Accelerator Dosage on Fresh Concrete Properties and on Inter-Layer Strength in Shotcrete 3D Printing
  353. Baz Bilal, Aouad Georges, Rémond Sébastien (2020-01)
    Effect of the Printing Method and Mortar’s Workability on Pull-Out Strength of 3D Printed Elements
  354. Suntharalingam Thadshajini, Nagaratnam Brabha, Poologanathan Keerthan, Hackney Phil et al. (2019-12)
    Effect of Polypropylene-Fibers on the Workability Parameters of Extrudable Cementitious Materials
  355. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-11)
    Investigation into the Effect of Delays Between Printed Layers on the Mechanical Strength of Inkjet 3DP Mortar
  356. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2019-09)
    Effect of Silicon-Carbide-Nano-Particles on 3D Printability of Cement-Based Materials
  357. Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
    The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete
  358. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
    A Study into the Effect of Different Nozzles Shapes and Fiber-Reinforcement in 3D Printed Mortar
  359. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
    An Investigation into the Effects of Deposition-Orientation of Material on the Mechanical Behavior of the Cementitious Powder and Gypsum-Powder in Inkjet 3D Printing
  360. Chen Yu, Figueiredo Stefan, Yalçınkaya Çağlar, Çopuroğlu Oğuzhan et al. (2019-04)
    The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined-Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing
  361. Tay Yi, Li Mingyang, Tan Ming (2019-04)
    Effect of Printing Parameters in 3D Concrete Printing:
    Printing Region and Support Structures
  362. Zahabizadeh Behzad, Cunha Vítor, Pereira João, Gonçalves Claúdia (2019-03)
    The Effect of Loading-Direction on the Compressive Behavior of a 3D Printed Cement-Based Material
  363. Marchment Taylor, Sanjayan Jay, Xia Ming (2019-03)
    Method of Enhancing Inter-Layer Bond Strength in Construction-Scale 3D Printing with Mortar by Effective Bond Area Amplification
  364. Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
    Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing
  365. Chen Mingxu, Guo Xiangyang, Zheng Yan, Li Laibo et al. (2018-11)
    Effect of Tartaric Acid on the Printable, Rheological and Mechanical Properties of 3D Printing Sulphoaluminate Cement-Paste
  366. Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
    Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction
  367. Putten Jolien, Schutter Geert, Tittelboom Kim (2018-09)
    The Effect of Print Parameters on the (Micro)structure of 3D Printed Cementitious Materials
  368. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
    Effect of Spray-Based Printing Parameters on Cementitious Material-Distribution
  369. Tay Yi, Ting Guan, Qian Ye, Panda Biranchi et al. (2018-07)
    Time-Gap-Effect on Bond Strength of 3D Printed Concrete
  370. Lao Wenxin, Tay Yi, Quirin Didier, Tan Ming (2018-05)
    The Effect of Nozzle Shapes on the Compactness and Strength of Structure Printed in Additive Manufacturing of Concrete
  371. Panda Biranchi, Mohamed Nisar, Tay Yi, He Lewei et al. (2018-05)
    Effects Of Slag Addition On Bond Strength Of 3D Printed Geopolymer Mortar:
    An Experimental Investigation
  372. Ting Andrew, Tay Yi, Annapareddy Ashokreddy, Li Mingyang et al. (2018-05)
    Effect of Recycled-Glass Gradation in 3D Cementitious Material-Printing
  373. Lim Jian, Weng Yiwei, Li Mingyang (2018-05)
    Effect of Fiber-Reinforced Polymer on Mechanical Performance of 3D Printed Cementitious Material
  374. Li Mingyang, Lao Wenxin, He Lewei, Masia Lorenzo et al. (2018-05)
    Effect of Rotational Trapezoid Shaped Nozzle on Material-Distribution in 3D Cementitious Material-Printing-Process
  375. Zareiyan Babak, Khoshnevis Behrokh (2018-05)
    Effects of Mixture Ingredients on Extrudability of Concrete in Contour Crafting
  376. Qian Ye, Schutter Geert (2018-04)
    Different Effects of NSF and PCE Superplasticizer on Adsorption, Dynamic Yield-Stress and Thixotropy of Cement-Pastes
  377. Zareiyan Babak, Khoshnevis Behrokh (2018-04)
    _Effects of Mixture Ingredients on Inter-Layer Adhesion of Concrete in Contour Crafting
  378. Panda Biranchi, Mohamed Nisar, Tan Ming (2018-04)
    Effect of 3D Printing on Mechanical Properties of Fly Ash-Based Inorganic Geopolymer
  379. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2018-04)
    Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete
  380. Vaitkevičius Vitoldas, Šerelis Evaldas, Kerševičius Vidas (2018-03)
    Effect of Ultra-Sonic Activation on Early Hydration Process in 3D Concrete Printing Technology
  381. Yuan Qiang, Zhou Dajun, Li Baiyun, Huang Hai et al. (2017-11)
    Effect of Mineral Admixtures on the Structural Build-Up of Cement-Paste
  382. Zareiyan Babak, Khoshnevis Behrokh (2017-08)
    Effects of Interlocking on Inter-Layer Adhesion and Strength of Structures in 3D Printing of Concrete
  383. Marchment Taylor, Xia Ming, Dodd Elise, Sanjayan Jay et al. (2017-07)
    Effect of Delay-Time on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
  384. Zareiyan Babak, Khoshnevis Behrokh (2017-06)
    Inter-Layer Adhesion and Strength of Structures in Contour Crafting:
    Effects of Aggregate-Size, Extrusion-Rate, and Layer-Thickness
  385. Ahmed Zeeshan, Bos Freek, Wolfs Robert, Salet Theo (2016-11)
    Design Considerations Due to Scale Effects in 3D Concrete Printing
  386. Jeong Jae, Jang Kyong, Park Chan, Lee Seung et al. (2016-05)
    Effect of Admixtures on Pumpability for High-Strength Concrete
  387. Bessaies-Bey Hela, Baumann Robert, Schmitz Marc, Radler Michael et al. (2015-05)
    Effect of Polyacrylamide on Rheology of Fresh Cement-Pastes
  388. Le H., Kadri Hadj, Aggoun Salima, Vierendeels Jan et al. (2015-01)
    Effect of Lubrication-Layer on Velocity-Profile of Concrete in a Pumping Pipe