Skip to content

#process

Keywords by Co - Occurrence

  1. Basith Mydeen Pitchai Mohamed Abdul (2025-12)
    Polymer-Enhanced Composites for 3D Concrete Printing:
    A Review of Materials, Processes, and Performance
  2. Kamhawi Abdallah, Lin Yuxin, Watson Christopher, Barton Kira et al. (2025-12)
    A Framework for Process Anomaly Detection in 3D Concrete Printing
  3. Ferrara Liberato, Rizzieri Giacomo, Cremonesi Massimiliano (2025-12)
    A Particle Fluid Dynamics Modelling Approach to Design 3D Concrete Printing Materials and Processes
  4. Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
    Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
    A Systematic Review
  5. Jacobi Ando, Zöllner Jan-Phillip, Hack Norman, Mai (née Dressler) Inka (2025-12)
    Encasement of Pre-Placed Reinforcement in Injection 3D Concrete Printing:
    The Effect of Rheology and Process Parameters
  6. Kloft Harald (2025-12)
    Digital Building Fabrication – The Path Towards the Unity of Material, Process and Form:
    A Personal Reflection from Research and Practice
  7. Luo Xiaoyu, Zhao Yuqi, Yang Min, Yao Xiaofei et al. (2025-12)
    Introducing Cement Composite Agents During Printing Process to Enhance the 3D-Printed Concrete Interfaces Between Layers and Filaments
  8. Fasihi Ali, Libre Nicolas (2025-11)
    Tip Penetration Test for Rapid in-Line Assessment of Static Yield Stress During 3D Concrete Printing Process
  9. Geng Renyu, Jiang Jinming, Du Pengcong, Zhang Huiliang et al. (2025-11)
    Multiscale Thermal Optimization of 3D-Printed Walls:
    Integrating Structure, Material, and Process with Fire-Thermal Synergy
  10. Banijamali Kasra, Martin Michael, Mascarenas David, Kazemian Ali (2025-11)
    Automated Inspection in Robotic 3D Printing:
    In-Process Geometrical Measurements Using Structured Light Machine Vision
  11. Dörrie Robin, Lachmayer Lukas, Baghdadi Abtin, David Martin et al. (2025-11)
    Investigation on Process Guidelines and Geometric Capabilities for Robust Shotcrete 3D Printing
  12. Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2025-10)
    Dual Strategies for Enhancing Carbonation Curing in 3D Printing Steel Slag Mortars:
    Material Modification and Curing Process Innovation
  13. Xia Kailun, Chen Yuning, Jia Lutao, Quan Shitao et al. (2025-10)
    The Impact of Internal Stress Generated During the Printing Process on the Early-Age Properties of 3D Printed Concrete
  14. Chen Baixi, Yang Lei, Jiang Sheng (2025-09)
    Stochastic Analysis of 3D Concrete Printing Process with Curvature and Inclination by Explainable Data-Driven Modelling
  15. Li Fuhai, Xiao Sai, Yang Bo, Li Kepu et al. (2025-09)
    Mechanical Properties and Anisotropy of 3D-Printed Concrete Modified with Multiscale Materials Based on Optimized Printing Process Design
  16. Sari Mustika, Berawi Mohammed, Taswin William, Saroji Gunawan et al. (2025-09)
    Work Breakdown Structure and Construction Process Framework for a Hybrid 3D-Printed Modular Building
  17. Quah Tan, Liu Zhixin, Tay Yi, Li Mingyang et al. (2025-08)
    In-Process Filament Repair in 3D Concrete Printing with Instance Segmentation
  18. Yang Shuai, Li Fei, Lu Ya, Xu Xiaoming et al. (2025-08)
    Study of the Printing Characteristics of a 3D Printing Solution for the Purpose of Process Optimization
  19. Kiyani Muhammad, Hussain Syed, Emaan Rajja, Kamal Muhammad et al. (2025-08)
    Influence of Process Parameters on 3D Concrete Printing:
    A Step Towards Standardized Approaches
  20. Kantaros Antreas, Ganetsos Theodore, Kanetaki Zoe, Stergiou Constantinos et al. (2025-08)
    Design and Fabrication of Customizable Urban Furniture Through 3D Printing Processes
  21. Amdouni Marwen, Nasraoui Helmi, Rezgui Mohamed, Trabelsi Ali (2025-07)
    Use of the RDPP-SF Method to Analyze Rheology Variation in an AM-Cement-Based Process
  22. Yousaf Arslan, Khan Shoukat, Koç Muammer (2025-07)
    Material, Process, and Design Optimization of Local Earthen Soil Reinforced with Natural Fiber Waste and Nanoclay for 3DP of Functional Structures
  23. Rizzieri Giacomo, Meni Simone, Cremonesi Massimiliano, Ferrara Liberato (2025-07)
    A Particle Finite Element Method for Investigating the Influence of Material and Process Parameters in 3D Concrete Printing
  24. Zuo Zibo, Huang Yulin, Corte Wouter (2025-06)
    Real-Time Monitoring of Printed Concrete Weight During 3D Concrete Printing to Inversely Assess Process Stability:
    Indicators and Experiments
  25. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-06)
    Multiphysics Modelling of 3D Concrete Printing:
    From Material Model to Process Simulation and Optimisation
  26. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
    Enhancing the Mix Design in 3D Concrete Printing Through Systematic Optimization Process
  27. Si Wen, Khan Mehran, McNally Ciaran (2025-06)
    A Comprehensive Review of Rheological Dynamics and Process Parameters in 3D Concrete Printing
  28. Safal K., Liu Han, Lopes Sousa Israel, Laflamme Simon et al. (2025-05)
    Investigation of 3D Printed Concrete for Real-Time Monitoring of Additive Manufacturing Process
  29. Mishra Sanjeet, Snehal K., Das B., Chandrasekaran Rajasekaran et al. (2025-05)
    From Printing to Performance:
    A Review on 3D Concrete Printing Processes, Materials, and Life Cycle Assessment
  30. An Dong, Rahman Mahfuzur, Zhang Y., Yang Chunhui (2025-05)
    Effects of Key 3D Concrete Printing Process Parameters on Layer Shape:
    Experimental Study and Smooth Particle Hydrodynamics Modelling
  31. Berawi Mohammed, Sari Mustika, Bakri Helty, Miraj Perdana et al. (2025-04)
    3D Printing Technology for Precast Concrete:
    A Business Process Perspective from Indonesian Construction Sector
  32. Yang Kun, Yuan Jingbo, Wang Yibo, Yang Fan et al. (2025-03)
    Optimization of 3D Printing Nozzle Structure and the Influence of Process Parameters on the Forming Performance of Underwater Concrete
  33. Zat Tuani, Schuster Sílvio, Schmitt Duarte Ester, Freitas Daudt Natália et al. (2025-03)
    Rheological Properties of High-Performance Concrete Reinforced with Microfibers and Their Effects on 3D Printing Process
  34. Sangiorgio Valentino, Bianchi Iacopo, Forcellese Archimede (2025-02)
    Advancing Decarbonization Through 3D Printed Concrete Formworks:
    LIFE Cycle Analysis of Technologies, Materials, and Processes
  35. Kumar Soni Ashish, Anil Sangwai Keyur, Panda Biranchi (2025-01)
    In-Process Monitoring and Quality-Assessment of 3D Concrete Printing Process
  36. Nadi Mouad, Majdoubi Hicham, Haddaji Younesse, Bili Oumaima et al. (2025-01)
    Digital Fabrication Processes for Cementitious Materials Using Three-Dimensional 3D Printing Technologies
  37. Tarhan Yeşim, Şahin Remzi (2024-12)
    The Impact of Air-Entraining on Frost-Endurance in 3D Printed Concrete:
    The Function of Printing Orientation and Curing Process
  38. Wang Qingwei, Han Song, Liu Qi, Yang Junhao et al. (2024-12)
    Research on the 3D Printing Process and Filament Shape of Cementitious Materials in Low Gravity
  39. Avancini Victor, Quintana-Ruiz Osvaldo, Campello Eduardo (2024-12)
    Assessing 3D Printed Concrete Process Parameters Through Discrete Element Modeling
  40. Raza Muhammad, Besklubova Svetlana, Zhong Ray (2024-11)
    Comparative Environmental Value-Stream-Assessment of Off-Site and On-Site 3D Construction Printing Processes
  41. Heinze Lisa, Liebringshausen Anne, Eversmann Philipp (2024-11)
    3D Printing with Wood Waste:
    Development of Reusable Printing Material Based on Waste Wood Particles and Its Digital Manufacturing Process for Wall Constructions in Architecture
  42. Rothe Tom, Gantner Stefan, Hack Norman, Hühne Christian (2024-11)
    Characterisation of the Alkaline-Resistance of Fiber-Reinforcement Strands Produced in a Dynamic Fiber Winding Process for 3D Concrete Printing
  43. Fasihi Ali, Libre Nicolas (2024-10)
    Interaction Between Material and Process-Parameters During 3D Concrete-Extrusion-Process
  44. Yang Yekai, Zhang Chiyu, Liu Zhongxian, Dong Liang et al. (2024-10)
    Effect of Hydration Process on the Inter-Layer Bond Tensile Mechanical Properties of Ultra-High-Performance Concrete for 3D Printing
  45. Abstoß Marvin, Funke Henrik, Gelbrich Sandra (2024-10)
    Sustainable Production of Complex Precast Concrete Elements Without Demolding Drafts Using Concrete Extrusion and Processing
  46. Li Shuai, Lan Tian, Nguyen Hung-Xuan, Tran Jonathan (2024-10)
    Frontiers in Construction 3D Printing:
    Self-Monitoring, Multi-Robot, Drone-Assisted Processes
  47. Kloft Harald, Sawicki Bartłomiej, Bos Freek, Dörrie Robin et al. (2024-09)
    Interaction of Reinforcement, Process, and Form in Digital Fabrication with Concrete
  48. Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2024-09)
    Data-Driven Design-Process and Production of Stress-Optimized Concrete Girders with Integrated Tendons Using 3D Printing
  49. Chen Baixi, Zhao Xueqi, Qian Xiaoping (2024-09)
    Voxel-Based Path-Driven 3D Concrete Printing Process Simulation Framework Embedding Inter-Layer Behavior
  50. Haufe Carl, Castel Paula, Strahm Benedikt, Nigl David et al. (2024-09)
    A Digital Design Process for Bundling of Void Formers for Application in Functionally Graded Concrete
  51. Engel Sven, Hegger Josef, Claßen Martin (2024-09)
    Automated Manufacturing Process and Structural Performance of Ribbed CRC Slabs
  52. Lachmayer Lukas, Quantz Jelle, Heeren Hauke, Recker Tobias et al. (2024-09)
    A Spatial Multi-Layer Control-Concept for Strand-Geometry-Control in Robot-Based Additive Manufacturing-Processes
  53. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2024-09)
    Multi-Physics Modelling for Extrusion-Based 3D Printing:
    Material, Process and Applications
  54. Gürel Şeyma, Wangler Timothy, Garger Moritz, Flatt Robert (2024-09)
    Residence-Time-Distribution Evaluation Method for In-Line Mixing Processes in Digital Concrete
  55. Sovetova Meruyert, Calautit John (2024-09)
    Effect of the Printing Process on Thermal Performance of 3D Printed Structures
  56. Gosslar Joschua, Dorresteijn Evelien, David Martin, Leusmann Thorsten et al. (2024-09)
    Digital Fabrication with Local Earthen Materials:
    The Relevance of Process Robustness
  57. Rehman Atta, Kim Ik-Gyeom, Kim Jung-Hoon (2024-09)
    Exploring the Impact of the Pumping Process on the Structural Build-Up in the Context of 3D Concrete Printing
  58. Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph, Hüsken Götz (2024-09)
    Correlation of Continuously Measured In-Line Process Parameters and Extruded Geometry in 3D Concrete Printing Experiments
  59. Schönsee Eric, Jeyifous Olubunmi, Strangfeld Christoph, Hüsken Götz (2024-09)
    Investigations on Multi-Sensor Data for Monitoring Volume Flow During the Printing Process
  60. Dörrie Robin, David Martin, Freund Niklas, Lowke Dirk et al. (2024-09)
    Surface Processing of Shotcrete 3D Printed Concrete Elements Using a Rotating Trowel Disc:
    Influence of Timing on Resulting Surface Quality
  61. Bono Victor, Demont Léo, Ducoulombier Nicolas, Mesnil Romain et al. (2024-09)
    Large-Scale 3D Printing of a Shell Structure Reinforced by the Flow-Based Pultrusion Process
  62. Sovetova Meruyert, Kaiser Calautit John (2024-08)
    Thermal and Energy Efficiency in 3D Printed Buildings:
    Review of Geometric Design, Materials and Printing Processes
  63. Bodea Serban, Dell’Endice Alessandro, Aloutsanidis Vasilis, Bürgin Theophil et al. (2024-08)
    Phoenix 3D Concrete-Printed Bridge:
    Falsework System and Construction Process Development
  64. Farrokhsiar Paniz, Gürsoy Benay, Duarte José (2024-08)
    A Comprehensive Review on Integrating Vision-Based Sensing in Extrusion-Based 3D Printing Processes:
    Toward Geometric Monitoring of Extrusion-Based 3D Concrete Printing
  65. Givkashi Mohammad, Moodi Faramarz, Ramezanianpour Amir (2024-08)
    Effect of Pumping Process on the Properties of 3D Printed Concrete Containing Air-Entraining-Agent
  66. Wangler Timothy, Tao Yaxin, Das Arnesh, Mahmoudi Matineh et al. (2024-08)
    Aluminate 2K Systems in Digital Concrete:
    Process, Design, Chemistry, and Outlook
  67. Buschmann Birger, Henke Klaudius, Asshoff Carsten, Talke Daniel et al. (2024-08)
    Additive Manufacturing of Wood-Composite-Parts by Individual Layer Fabrication:
    Influence of Process Parameters on Product Properties
  68. Liu Chao, Zhang Zedi, Jia Zijian, Cao Ruilin et al. (2024-07)
    Quantitative Characterization of Bubble-Stability of Foam-Concrete Throughout Extrusion-Process:
    From Yield-Stress , Viscosity and Surface Tension Point of View
  69. Dorresteijn Evelien, Tsiotou Sofia, Lowke Dirk (2024-07)
    Keeping the Processability of a Clay Mortar for Extrusion 3D Printing While Decreasing Shrinkage and Increasing the Green Strength
  70. Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-07)
    CFD Simulation of Twin-Pipe Pumping Process for 3D Concrete Printing
  71. Parrott Brian, Coronado Preciado Angelica, Feron Eric (2024-07)
    Selective Sheet-Extrusion:
    A Novel Manufacturing-Process for Large-Format Material-Extrusion
  72. Wang Jun, Zhang Xuanzheng, Liu Zhenhua, Zhao Jiasheng (2024-07)
    Study on the Effects of Printing Process and Reinforcement Materials on the Performance of 3D-Printed Glass Bead Insulation Mortar
  73. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
    Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
  74. Assunção Badan Julie, Chadha Kunaljit, Vasey Lauren, Brumaud Coralie et al. (2024-06)
    Contribution of Production Processes in Environmental Impact of Low-Carbon Materials Made by Additive Manufacturing
  75. Ostovari Shadi, Shayani Hooman (2024-06)
    Simulation and Analysis of Automated Generalised Interleaved Layered Execution (AGILE) Process for Concrete Shell-Structures
  76. Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay, Mechtcherine Viktor (2024-06)
    In-Process Textile Reinforcement Method for 3D Concrete Printing and Its Structural Performance
  77. Lachmayer Lukas, Dittrich Lars, Recker Tobias, Dörrie Robin et al. (2024-06)
    In-Line Image-Based Reinforcement Detection for Concrete Additive Manufacturing Processes Using a Convolutional Neural Network
  78. Berawi Mohammed, Sari Mustika, Oktaviani Astiti, Miraj Perdana et al. (2024-05)
    Impact of BIM and 3D Printing Technologies on Production Process and Productivity of Pre-Cast Concrete in Construction Project
  79. Wu Chengde, Evans Pete (2024-05)
    An Integrated System for Improving 3D Concrete Printing Process
  80. Deetman Arjen, Bos Derk, Blaakmeer Jan, Salet Theo et al. (2024-05)
    An In-Line Dye Tracer Experiment to Measure the Residence Time in Continuous Concrete Processing
  81. Salari Farid, Zocca Andrea, Bosetti Paolo, Hlaváček Petr et al. (2024-05)
    Powder-Bed 3D Printing by Selective Activation of Magnesium-Phosphate-Cement:
    Determining Significant Processing Parameters and Their Effect on Mechanical Strength
  82. An Dong, Zhang Yixia, Yang Chunhui (2024-05)
    Incorporating Coarse Aggregates into 3D Concrete Printing from Mixture Design and Process-Control to Structural Behavior and Practical Applications:
    A Review
  83. Wangler Timothy, Vangen Kathrina, Burger Joris, Flatt Robert (2024-05)
    Digital Fabrication Material-Processing-Strategy for Bespoke Low-Clinker Mass-Concrete Components
  84. Matus Ilse, Alves Jorge, Góis Joaquim, Vaz-Pires Paulo et al. (2024-04)
    Artificial Reefs Through Additive Manufacturing:
    A Review of Their Design, Purposes and Fabrication Process for Marine Restoration and Management
  85. Wei Ying, Han Song, Chen Ziwei, Lu Jianxian et al. (2024-04)
    Numerical Simulation of 3D Concrete Printing Derived from Printer Head and Printing Process
  86. Curth Alexander, Pearl Natalie, Castro-Salazar Angelica, Mueller Caitlin et al. (2024-03)
    3D Printing Earth:
    Local, Circular Material Processing, Fabrication Methods, and Life Cycle Assessment
  87. Wijaya Ignasius, Kreiger Eric, Masud Arif (2024-03)
    Modeling of Concrete Printing Process with Frictional Interface
  88. Gündüz Gamze, Özkar Mine (2024-02)
    A Process-Based Framework for Adaptable Modules in Robotic Clay 3D Printing
  89. Keita Emmanuel, Perrot Arnaud (2024-02)
    Processing of Earth-Based Materials:
    Current Situation and Challenges Ahead
  90. Altıparmak Sadettin, Daminabo Samuel (2024-01)
    Suitability-Analysis for Extrusion-Based Additive Manufacturing Process
  91. Yu Hao, Zhang Weiwei, Yin Binbin, Sun Weikang et al. (2024-01)
    Modeling Extrusion-Process and Layer-Deformation in 3D Concrete Printing via Smoothed Particle-Hydrodynamics
  92. Rocha Douglas, Faria Paulina, Lucas Sandra (2023-12)
    Additive Manufacturing of Earth-Based Materials:
    A Literature Review on Mortar-Composition, Extrusion, and Processing Earth
  93. Lindner Marco, Gliniorz Ralf, Männel Mike, Garbe Daniel et al. (2023-12)
    Tool-Developments for Additive Manufacturing-Processes with Anchor for the Modern Flow-Production
  94. Böhler David, Freund Niklas, Mai (née Dressler) Inka, Lowke Dirk (2023-12)
    Shotcrete 3D Printing:
    Effect of Material‐Process-Interaction on the Global and Local Material Density
  95. Kruppa Henning, Kalthoff Matthias, Vollpacht Anya, Matschei Thomas (2023-12)
    Development of an Alkali-Activated Binder for the Extrusion Process
  96. Zhao Zengfeng, Ji Chenyuan, Xiao Jianzhuang, Yao Lei et al. (2023-11)
    A Critical Review on Reducing the Environmental Impact of 3D Printing Concrete:
    Material-Preparation, Construction-Process and Structure-Level
  97. Šána Vladimír, Litoš Jiří, Kolář Karel (2023-10)
    Mechanical Properties of the New Cement Composite Mixture Appropriate for Robotic Processing
  98. Placzek Gerrit, Schwerdtner Patrick (2023-10)
    From Process to System:
    A Review on the Implications of Concrete 3D Printing on Project Delivery
  99. Dörrie Robin, David Martin, Freund Niklas, Lowke Dirk et al. (2023-10)
    In-Process Integration of Reinforcement for Construction Elements During Shotcrete 3D Printing
  100. Rothe Tom, Hühne Christian, Gantner Stefan, Hack Norman (2023-10)
    Dynamic Winding Process of Individualized Fiber-Reinforcement Structures for Additive Manufacturing in Construction
  101. Jewett Jackson, Carstensen Josephine (2023-09)
    Topology-Optimization for Material-Extrusion-Based Additive Manufacturing-Processes with Weak Bead Bonding
  102. Rymeš Jiří, Červenka Jan, Jendele Libor (2023-09)
    Material-Modelling and Simulation of 3D Concrete Printing Process
  103. Jia Zijian, Zhang Zedi, Jia Lutao, Cao Ruilin et al. (2023-09)
    Effect of Different Expansive Agents on the Early-Age Structural Build-Up Process of Cement-Paste
  104. Otto Jens, Mischke Janik (2023-09)
    Operational and Occupational Safety When Using Automated Manufacturing Processes on Construction Sites:
    Consideration of Current Legal and Technical Framework Conditions
  105. Lachmayer Lukas, Müller Nico, Herlyn Thilo, Raatz Annika (2023-08)
    Volume Flow-Based Process-Control for Robotic Additive Manufacturing-Processes in Construction
  106. Rahal Said, Kaci Abdelhak, Skoudarli Abdeslam (2023-07)
    Evaluation of Mechanical Anisotropy-Induced by 3D Printing Process for Earth-Based Materials
  107. Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2023-07)
    Numerical Simulation of the Extrusion and Layer-Deposition-Processes in 3D Concrete Printing with the Particle-Finite-Element-Method
  108. Almomani Mohammed, Ababneh Nedal, Abdalla Khairedin, Shbeeb Nadim et al. (2023-07)
    Selecting the Best 3D Concrete Printing Technology for Refugee Camp’s Shelter Construction Using Analytical Hierarchy Process:
    The Case of Syrian Refugees in Jordan
  109. Mohiuddin Rafay, Cruz Policroniades Miranda, Slepicka Martin, Borrmann André (2023-07)
    Optical Process-Control for Extrusion-Based Additive Manufacturing-Methods in Construction
  110. Litoš Jiří, Šána Vladimír, Uhlík Adam, Kolář Karel et al. (2023-07)
    Mechanical and Physical Properties of Cement Mixtures for 3D Processing
  111. Zhang Sisi, Kalus Matthias, Engel Sven, Hegger Josef et al. (2023-06)
    Development of an Innovative 3D Printing Process for Reinforced Concrete:
    AMoRC Method
  112. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Youcef-Toumi Kamal et al. (2023-06)
    Experimental Workflow Implementation for Automatic Detection of Filament-Deviation in 3D Robotic Printing Process
  113. Kokare Samruddha, Oliveira João, Godina Radu (2023-05)
    Life Cycle Assessment of Additive Manufacturing Processes:
    A Review
  114. Forcael Eric, Martínez-Chabur Paula, Ramírez-Cifuentes Iván, García-Alvarado Rodrigo et al. (2023-05)
    Performance-Analysis of 3D Concrete Printing Processes Through Discrete-Event-Simulation
  115. Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2023-04)
    Probabilistic Prediction of Structural Failure During 3D Concrete Printing Processes
  116. Zbyszyński Wojciech, Pietras Daniel, Sadowski Tomasz (2023-04)
    Data-Image-Correlation-Analysis of the Destruction-Process of 3D Printable Layered Beams Subjected to the Three-Point Bending Process
  117. Ekanayaka Virama, Hürkamp André (2023-03)
    Implementation of a Surrogate-Model for a Novel Path‐Based Finite-Element-Simulation for Additive Manufacturing-Processes in Construction
  118. Quah Tan, Tay Yi, Lim Jian, Tan Ming et al. (2023-03)
    Concrete 3D Printing:
    Process-Parameters for Process-Control, Monitoring and Diagnosis in Automation and Construction
  119. Talke Daniel, Saile Bettina, Meier Niklas, Herding Friedrich et al. (2023-03)
    Particle-Bed 3D Printing by Selective Cement-Activation:
    Influence of Process Parameters on Particle-Bed Density
  120. Khan Shoukat, Koç Muammer (2023-03)
    Buildability-Analysis of 3D Concrete Printing Process:
    A Parametric Study Using Design of Experiment-Approach
  121. Sambucci Matteo, Biblioteca Ilario, Valente Marco (2023-01)
    Life Cycle Assessment (LCA) of 3D Concrete Printing and Casting Processes for Cementitious Materials Incorporating Ground Waste Tire Rubber
  122. Ahmed Ghafur (2023-01)
    A Review of 3D Concrete Printing:
    Materials and Process Characterization, Economic Considerations and Environmental Sustainability
  123. Shanmugan S., Sandhyarani T., Palani Subbaiya (2022-12)
    Development of 3D Concrete Printing Using Additive Manufacturing Processes for Construction and Building Industry
  124. Li Zihan, Liu Huanbao, Cheng Xiang, Nie Ping et al. (2022-12)
    Improvement of 3D Printing Cement-Based Material-Process:
    Parameter Experiment and Analysis
  125. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2022-12)
    Assessing Printing Synergism in a Dual 3D Printing System for Ultra-High-Performance Concrete In-Process Reinforced Cementitious Composite
  126. Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
    Modelling of 3D Concrete Printing Process:
    A Perspective on Material and Structural Simulations
  127. Roux Charlotte, Kuzmenko Kateryna, Roussel Nicolas, Mesnil Romain et al. (2022-11)
    Life Cycle Assessment of a Concrete 3D Printing Process
  128. Liu Zhixin, Li Mingyang, Wong Teck (2022-11)
    Investigations of Nozzle-Configuration and Process Parameters on Porosity Formation of the 3D Printed Structure
  129. Cao Xiangpeng, Yu Shiheng, Wu Shuoli, Cui Hongzhi (2022-11)
    Experimental Study of Hybrid Manufacture of Printing and Cast-in-Process to Reinforce 3D Printed Concrete
  130. Lachmayer Lukas, Böhler David, Freund Niklas, Mai (née Dressler) Inka et al. (2022-11)
    Modelling the Influence of Material and Process Parameters on Shotcrete 3D Printed Strands:
    Cross-Section Adjustment for Automatic Robotic Manufacturing
  131. Park Ji-seul, Jeong Seung-Su, Hong Sung-Gul (2022-09)
    Numerical Analysis on Stability of Cylindrical Structures in 3D Printing Process
  132. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2022-09)
    Robot-Assisted Flow-Production-Processes Tool-Development for the Fabrication of Thin-Walled Fiber-Reinforced Concrete Elements
  133. Zhang Hongping, Liu Yaling, Cheng Zhi, Zhao Zhiyi (2022-07)
    Effect of Layering Molding Process on Strength of 3D Printed Composite Cement-Based Materials
  134. Farahbakhsh Mehdi, Rybkowski Zofia, Zakira Umme, Kalantar Negar et al. (2022-07)
    Impact of Robotic 3D Printing Process Parameters on Inter-Layer Bond Strength
  135. Ahmed Ghafur, Askandar Nasih, Jumaa Ghazi (2022-07)
    A Review of Large-Scale 3DCP:
    Material-Characteristics, Mix-Design, Printing-Process, and Reinforcement-Strategies
  136. Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2022-06)
    Uncertainty Quantification of Concrete Properties at Fresh State and Stability-Analysis of the 3D Printing Process by Stochastic Approach
  137. Xu Jie, Kolawole John, Provis John, Dobrzanski James et al. (2022-06)
    An Early Trial on Milling 3D Printed Concrete Geometries:
    Observations and Insights of the Process
  138. Putten Jolien, Smet M., Heede Philip, Schutter Geert et al. (2022-06)
    Influence of the Print Process on the Durability of Printed Cementitious Materials
  139. Böhler David, Mai (née Dressler) Inka, Freund Niklas, Lachmayer Lukas et al. (2022-06)
    Influence of Material and Process Parameters on Hardened State Properties of Shotcrete 3D Printed Elements
  140. Lachmayer Lukas, Dörrie Robin, Kloft Harald, Raatz Annika (2022-06)
    Process-Control for Additive Manufacturing of Concrete Components
  141. Hack Norman, Jantzen Carsten, Brohmann Leon, Gerke Markus et al. (2022-06)
    A Closed-Loop Workflow for Quality Inspection and Integrated Post-Processing of 3D Printed Concrete Elements
  142. Mohan Manu, Rahul Attupurathu, Tao Yaxin, Schutter Geert et al. (2022-06)
    Hydration Re-Initiation of Borated CSA Systems with a Two-Stage Mixing Process:
    An Application in Extrusion-Based Concrete 3D Printing
  143. Wang Xianggang, Jia Lutao, Jia Zijian, Zhang Chao et al. (2022-06)
    Optimization of 3D Printing Concrete with Coarse Aggregate via Proper Mix-Design and Printing-Process
  144. Nistler Maximilian, Kovaleva Daria, Tepper Louis, Blandini Lucio et al. (2022-05)
    Camera-Based Process Monitoring for Powder-Bed Additive Manufacturing in Construction
  145. Kazadi Billy, Yao Liang, Wang Li (2022-04)
    In-Process Reinforcement Method for 3D Concrete Printing:
    Status, Potentials and Challenges
  146. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2022-04)
    Effect of Processing on the Air-Void System of 3D Printed Concrete
  147. Wangler Timothy, Pileggi Rafael, Gürel Şeyma, Flatt Robert (2022-03)
    A Chemical Process Engineering Look at Digital Concrete Processes:
    Critical Step Design, In-Line Mixing, and Scale-Up
  148. Ranjan Rajeev, Kumar Deepak, Kundu Manoj, Chandra Moi Subhash (2022-03)
    A Critical Review on Classification of Materials Used in 3D Printing Process
  149. Lowke Dirk, Mai (née Dressler) Inka, Keita Emmanuel, Perrot Arnaud et al. (2022-02)
    Material-Process Interactions in Particle-Bed 3D Printing and the Underlying Physics
  150. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
    Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method
  151. Zöller Raphael, Ochlast Andreas, Zimmert Florian, Braml Thomas (2022-02)
    Development of Processes for the Automated Planning and Production of Individual Reinforced Concrete Elements
  152. Chen Yuning, Liu Chao, Cao Ruilin, Chen Chun et al. (2022-02)
    Systematical Investigation of Rheological Performance Regarding 3D Printing Process for Alkali-Activated Materials:
    Effect of Precursor Nature
  153. Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Process Classification and Case Studies
  154. Liu Xuanting, Sun Bohua (2021-11)
    The Influence of Interface on the Structural Stability in 3D Concrete Printing Processes
  155. Zhang Hongping, Wang Jianhong, Liu Yaling, Zhang Xiaoshuang et al. (2021-11)
    Effect of Processing Parameters on the Printing Quality of 3D Printed Composite Cement-Based Materials
  156. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2021-09)
    Particle-Finite-Element-Simulation of Extrusion-Processes of Fresh Concrete During 3D Concrete Printing
  157. Mechtcherine Viktor, Mai (née Dressler) Inka, Empelmann Martin, Gehlen Christoph et al. (2021-09)
    Digital Concrete Construction by Means of Additive Processes:
    State of the Art and Research Needs
  158. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2021-08)
    In-Process Reinforcing Method:
    Dual 3D Printing Procedure for Ultra-High-Performance Concrete Reinforced Cementitious Composites
  159. Bedarf Patrick, Dutto Alessandro, Zanini Michele, Dillenburger Benjamin (2021-08)
    Foam 3D Printing for Construction:
    A Review of Applications, Materials, and Processes
  160. Wang Li, Ma Guowei, Liu Tianhao, Buswell Richard et al. (2021-07)
    Inter-Layer Reinforcement of 3D Printed Concrete by the In-Process Deposition of U-Nails
  161. Breseghello Luca, Naboni Roberto (2021-07)
    Adaptive Tool-Path:
    Enhanced Design and Process-Control for Robotic 3DCP
  162. Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
    From Analytical Methods to Numerical Simulations:
    A Process Engineering Toolbox for 3D Concrete Printing
  163. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom et al. (2021-06)
    Numerical Simulation for 3D Printed Wall Structure During the Process of Printing Considering Uncertainty
  164. Hack Norman, Bahar Mohammad, Hühne Christian, Lopez William et al. (2021-06)
    Development of a Robot-Based Multi-Directional Dynamic Fiber Winding Process for Additive Manufacturing Using Shotcrete 3D Printing
  165. Pacillo Gerardo, Ranocchiai Giovanna, Loccarini Federica, Fagone Mario (2021-05)
    Additive Manufacturing in Construction:
    A Review on Technologies, Processes, Materials, and Their Applications of 3D and 4D Printing
  166. Schmidt Albrecht, Mengesha Meron, Göbel Luise, Könke Carsten et al. (2021-05)
    Numerical Modeling of an Extrusion-Based Concrete Printing Process Considering Spatially and Temporarily Varying Material and Process Parameters
  167. Weng Yiwei, Li Mingyang, Zhang Dong, Tan Ming et al. (2021-02)
    Investigation of Inter-Layer Adhesion of 3D Printable Cementitious Material from the Aspect of Printing-Process
  168. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
    Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
    Possibilities and Challenges
  169. Vallurupalli Kavya, Farzadnia Nima, Khayat Kamal (2021-01)
    Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements:
    A Review
  170. Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
    Improving Performance of Additive Manufactured Concrete:
    A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
  171. Placzek Gerrit, Schwerdtner Patrick (2020-12)
    Derivation of Integration Approaches for "Concrete 3D Printing" in the Construction Process Based on Features of Additive Manufacturing
  172. Papacharalampopoulos Alexios, Bikas Harry, Foteinopoulos Panagis, Stavropoulos Panagiotis (2020-11)
    A Path-Planning-Optimization Framework for Concrete-Based Additive Manufacturing Processes
  173. Xiao Jianzhuang, Zou Shuai, Yu Ying, Wang Yu et al. (2020-09)
    3D Recycled Mortar Printing:
    System-Development, Process-Design, Material-Properties and On-Site-Printing
  174. Maboudi Mehdi, Gerke Markus, Hack Norman, Brohmann Leon et al. (2020-08)
    Current Surveying Methods for the Integration of Additive Manufacturing in the Construction Process
  175. Sambucci Matteo, Marini Danilo, Sibai Abbas, Valente Marco (2020-08)
    Preliminary Mechanical Analysis of Rubber-Cement Composites Suitable for Additive Process Construction
  176. Archez Julien, Texier-Mandoki N., Bourbon X., Caron Jean-François et al. (2020-08)
    Adaptation of the Geopolymer Composite Formulation Binder to the Shaping Process
  177. Chang Ze, Schlangen Erik, Šavija Branko (2020-07)
    Extended-Lattice-Model to Simulate the Printing-Process of 3D Printed Cementitious Materials
  178. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-07)
    Control of Strand Properties Produced with Shotcrete 3D Printing by Accelerator Dosage and Process Parameters
  179. Freund Niklas, Mai (née Dressler) Inka, Lowke Dirk (2020-07)
    Studying the Bond Properties of Vertical Integrated Short Reinforcement in the Shotcrete 3D Printing Process
  180. Gardner Guy, Forward Kristen, Tse Kim, Sharma Karan (2020-07)
    Rapid Composite Formwork:
    An Automated and Customizable Process for Freeform Concrete Through Computational Design and Robotic Fabrication
  181. Grünewald Steffen, Schipper Roel (2020-07)
    Transition from Fluid to Solid Concrete in the Flexible Mould Process
  182. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2020-07)
    Numerical Modeling of an Extrusion-Based 3D Concrete Printing-Process Considering a Spatially-Varying Pseudo-Density Approach
  183. Wang Yu, Li Shuaishuai, Qin Tian, Yu Ying et al. (2020-07)
    Concrete 3D Printing:
    System Development, Process Planning and Experimental Results
  184. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-07)
    Influence of Processing Parameters on the Layer Geometry in 3D Concrete Printing:
    Experiments and Modelling
  185. Roussel Nicolas, Spangenberg Jon, Wallevik Jon, Wolfs Robert (2020-06)
    Numerical Simulations of Concrete Processing:
    From Standard Formative Casting to Additive Manufacturing
  186. Lowke Dirk, Talke Daniel, Mai (née Dressler) Inka, Weger Daniel et al. (2020-05)
    Particle-Bed 3D Printing by Selective Cement-Activation:
    Applications, Material and Process Technology
  187. Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
    A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete
  188. Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
    Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing
  189. Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
    Extrusion-Based Additive Manufacturing with Cement-Based Materials:
    Production Steps, Processes, and Their Underlying Physics
  190. Nazarian Shadi, Duarte José, Bilén Sven, Memari Ali et al. (2020-03)
    An Overview of the Execution of 3D Printed Sub-Scale Habitat on Mars:
    A Case Study to Exemplify the Automated Construction Process
  191. Grigoryan Erik, Semenova M. (2020-02)
    Automation of the Construction Process by Using a Hinged Robot with Interchangeable Nozzles
  192. Foteinopoulos Panagis, Esnault Vivien, Komineas George, Papacharalampopoulos Alexios et al. (2020-01)
    Cement-Based Additive Manufacturing:
    Experimental Investigation of Process Quality
  193. Grigoryan Erik, Babanina Anna, Kulakov Kirill (2019-12)
    Automation of the Construction Process by Using a Hinged Robot with Interchangeable Nozzles
  194. Marczyk Joanna, Ziejewska Celina, Łach Michał, Korniejenko Kinga et al. (2019-11)
    Possibilities of Using the 3D Printing Process in the Concrete and Geopolymers Application
  195. Celorrio-Barragué Luis, Calvo-Simón Sergio, Gaspar Marcelo, Vidal-Cortés Mariano et al. (2019-10)
    3D Printed Models-Based Lab Activities to Enhance Learning-Teaching Processes in Structural Engineering Courses
  196. Paolini Alexander, Kollmannsberger Stefan, Rank Ernst (2019-10)
    Additive Manufacturing in Construction:
    A Review on Processes, Applications, and Digital Planning Methods
  197. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2019-09)
    Processing of Set-on-Demand Solutions for Digital Fabrication in Architecture
  198. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-09)
    Post-Processing Techniques to Enhance Strength of Portland Cement Mortar Digitally Fabricated Using Powder-Based 3D Printing Process
  199. Wangler Timothy, Scotto Fabio, Lloret-Fritschi Ena, Flatt Robert (2019-09)
    Residence-Time-Distributions in Continuous Processing of Concrete
  200. Nematollahi Behzad, Xia Ming, Sanjayan Jay (2019-07)
    Post-processing Methods to Improve Strength of Particle-Bed 3D Printed Geopolymer for Digital Construction Applications
  201. Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
    The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete
  202. Dey Dhrutiman, Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2019-06)
    Processing of Cementitious Materials for 3D Concrete Printing
  203. Foteinopoulos Panagis, Papacharalampopoulos Alexios, Stavropoulos Panagiotis (2019-06)
    Block-Based Analytical Hierarchy Process Applied for the Evaluation of Construction Sector Additive Manufacturing
  204. Bhardwaj Abhinav, Jones Scott, Kalantar Negar, Pei Zhijian et al. (2019-06)
    Additive Manufacturing Processes for Infrastructure Construction:
    A Review
  205. Moreira Jr. Amarildo, Santos Francielle (2019-06)
    Automatization of the Constructive Process:
    A Systematic Study of the 3D Concrete Printing Technology (Contour Crafting)
  206. Wolfs Robert, Suiker Akke (2019-06)
    Structural Failure During Extrusion-Based 3D Printing Processes
  207. Krause Martin, Otto Jens (2019-05)
    Digital Process Model for Concrete 3D Printing
  208. Kreiger Eric, Kreiger Megan, Case Michael (2019-04)
    Development of the Construction Processes for Reinforced Additively Constructed Concrete
  209. Wolfs Robert, Bos Freek, Salet Theo (2019-03)
    Hardened Properties of 3D Printed Concrete:
    The Influence of Process Parameters on Inter-Layer Adhesion
  210. Wangler Timothy (2018-11)
    Digital Concrete Processing:
    A Review
  211. Prasittisopin Lapyote, Taweekarn Naphat, Chuaysiri Chanita, Snguanyat Chalermwut (2018-11)
    Printing and Fabrication Processes of Curvature Single-Layered Wall House Printed by 3D Extrusion-Printer
  212. Zivkovic Sasa, Battaglia Christopher (2018-10)
    Rough-Pass-Extrusion-Tooling:
    CNC Post-Processing of 3D Printed Sub-Additive Concrete Lattice-Structures
  213. Craipeau Typhanie, Lecompte Thibault, Toussaint Fabrice, Perrot Arnaud (2018-09)
    Evolution of Concrete-Formwork Interface in Slipforming Process
  214. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
    Experimental Investigation of Printing Parameters on Material-Distribution in 3D Spray Cementitious Material Printing Process
  215. Hu Chang’an, Du Wenbo (2018-08)
    Research on the Method for Improving Mechanical Properties of Sand-Mold-Based on 3D Printing Process
  216. Kumar Sanjay (2018-06)
    Process Chain Development for Additive Manufacturing of Cemented Carbide
  217. Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
    Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement
  218. Scotto Fabio, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias et al. (2018-05)
    Adaptive Control-System for Smart Dynamic Casting:
    Defining Fabrication-Informed Design-Tools and Process-Parameters in Digital Fabrication-Processes
  219. Li Mingyang, Lao Wenxin, He Lewei, Masia Lorenzo et al. (2018-05)
    Effect of Rotational Trapezoid Shaped Nozzle on Material-Distribution in 3D Cementitious Material-Printing-Process
  220. Hojati Maryam, Nazarian Shadi, Duarte José, Radlińska Aleksandra et al. (2018-04)
    3D Printing of Concrete:
    A Continuous Exploration of Mix-Design and Printing-Process
  221. Perrot Arnaud, Rangeard Damien, Courteille Eric (2018-04)
    3D Printing of Earth-Based Materials:
    Processing Aspects
  222. Vaitkevičius Vitoldas, Šerelis Evaldas, Kerševičius Vidas (2018-03)
    Effect of Ultra-Sonic Activation on Early Hydration Process in 3D Concrete Printing Technology
  223. Suiker Akke (2018-01)
    Mechanical Performance of Wall Structures in 3D Printing Processes:
    Theory, Design Tools and Experiments
  224. Wolfswinkel Jan, Land Wim, Stuit Herke, Bastiaens Guido et al. (2017-06)
    Design Process of a 3D Printed Concrete Water Taxi Stop
  225. Gosselin Clément, Duballet Romain, Roux Philippe, Gaudillière-Jami Nadja et al. (2016-03)
    Large-Scale 3D Printing of Ultra-High-Performance Concrete:
    A New Processing Route for Architects and Builders
  226. Hack Norman, Lauer Willi, Langenberg Silke, Gramazio Fabio et al. (2013-09)
    Overcoming Repetition:
    Robotic Fabrication Processes at a Large-Scale
  227. Lim Sungwoo, Buswell Richard, Le Thanh, Wackrow Rene et al. (2011-07)
    Development of a Viable Concrete Printing Process
  228. Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
    Developments in Construction-Scale Additive Manufacturing Processes
  229. Yeh Zhenghao, Khoshnevis Behrokh (2009-09)
    Geometric Conformity-Analysis for Automated Fabrication Processes Generating Ruled Surfaces:
    Demonstration for Contour Crafting
  230. Zhang Jing, Khoshnevis Behrokh (2009-06)
    Contour Crafting Process Planning and Optimization
  231. Perrot Arnaud, Mélinge Yannick, Estellé Patrice, Lanos Christophe (2009-04)
    Vibro-Extrusion:
    A New Forming Process for Cement-Based Materials
  232. Buswell Richard, Thorpe Tony, Soar Rupert, Gibb Alistar (2008-05)
    Design, Data and Process Issues for Mega-Scale Rapid Manufacturing Machines Used for Construction
  233. Hwang Dooil, Khoshnevis Behrokh (2005-11)
    An Innovative Construction Process-Contour Crafting (CC)
  234. Khoshnevis Behrokh, Dutton Rosanne (1998-01)
    Innovative Rapid Prototyping Process Makes Large-Sized, Smooth-Surfaced Complex Shapes in a Wide Variety of Materials