Skip to content

#layer

Keywords by Co - Occurrence

  1. Topolář Libor, Pazdera Luboš, Dvořák Karel, Černý Felix et al. (2026-04)
    Acoustic Emission Analysis of Tensile Failure in Layered 3D-Printed Fibre-Reinforced Fine-Grained Concrete
  2. Modi Chaman, Kumar Manish, Chopperla Krishna (2026-04)
    In-Process Reinforcement Method for 3D-Printed Concrete Layers
  3. Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2026-04)
    High-Fidelity Finite Element Modelling of Multi-Layer 3D Printing with Complex Toolpaths
  4. Wang Qingwei, Pan Jinlong, Han Song, Zhu Binrong et al. (2026-03)
    Effects of Nozzle Height on the Layer Deposition Process and Forming Performance of 3D Printing Concrete:
    Evidence from Experiments and CFD Simulations
  5. Tripathi Avinaya, Patel Devansh, Mobasher Barzin, Neithalath Narayanan (2026-03)
    Modeling of Layered, Multi-Material 3D-Printed Concrete Flexural Members:
    Towards Efficient Structural Design and Optimization
  6. Brunner Kim, Kostner Julia, Weger Daniel, Stengel Thorsten et al. (2026-03)
    Durability of Additively Manufactured SPI Components:
    Influence of Layer-Related Microstructural Characteristics
  7. Žižková Nikol, Válek Josef, Vespalec Arnošt, Melichar Jindřich et al. (2026-03)
    Layer Bond Strength in 3D-Printed Concrete:
    The Role of Interlayer Surface Area and Printing Delay Time
  8. Chen Chi, Wang Shenglin, Li Xiaoyuan, Yang Dengwei (2026-03)
    Recent Progress and Methodology for the Characterization of Layer-Effects of Extrusion-Based 3D-Printed Concrete
  9. Martins Diana, Matos João, Souda Diogo, Almeida Fernando (2026-03)
    COLD:
    Control and Optimization of Layer Deposition in Large-Scale Additive Manufacturing
  10. Rizzieri Giacomo, Lanteri Federico, Ferrara Liberato, Cremonesi Massimiliano (2026-02)
    ShapeGen3DCP:
    A Deep Learning Framework for Layer Shape Prediction in 3D Concrete Printing
  11. Sahai Rajan, Bisht Ravindra, Malik Lavanya, Rahman Mohamed et al. (2026-01)
    Strength Evaluation of 3D Concrete Printed Layers Using in-Situ Parameters Monitoring
  12. Koneswaran Bahirathan, Rajeev Pathmanathan, Sanjayan Jay (2025-12)
    3D Concrete-Printed Geocell for Reinforcing Unbound Granular Pavement Layers
  13. Luo Xiaoyu, Zhao Yuqi, Yang Min, Yao Xiaofei et al. (2025-12)
    Introducing Cement Composite Agents During Printing Process to Enhance the 3D-Printed Concrete Interfaces Between Layers and Filaments
  14. Shekhar Shashank, Kumar Manish, Mathur Rishabh (2025-10)
    Additive Manufacturing of Concrete with Low Initial Yield Strength Through Controlled Heating of Printed Layers
  15. Rizzieri Giacomo, Lanteri Federico, Ferrara Liberato, Cremonesi Massimiliano (2025-10)
    ShapeGen3DCP:
    A Deep Learning Framework for Layer Shape Prediction in 3D Concrete Printing
  16. Zhang Yi, Ren Qiang, Tittelboom Kim, Schutter Geert et al. (2025-09)
    Layer Interface in 3D Printed Cement-Based Materials:
    Heterogeneous Phase Distribution and New Insights into Formation Mechanism
  17. Wang Xiaoqi, Liu Xing, Xu Yanling, Cao Jianfu et al. (2025-08)
    A General Adaptive Layer Height Continuous Path Planning Algorithm for Concrete 3D Printing of Complex Porous Structures Based on Multi-Objective Optimization and Reinforcement Learning
  18. Maroszek Marcin, Hager Izabela, Mróz Katarzyna, Sitarz Mateusz et al. (2025-08)
    Anisotropy of Mechanical Properties of 3D-Printed Materials:
    Influence of Application Time of Subsequent Layers
  19. Siqueira Neto Luiz, Isgor Burkan, Weiss William (2025-08)
    Modeling Fluid Absorption in Layered Anisotropic Cement-Based Materials
  20. Ishikawa Shinichi, Yamada Ryo, Tasaki Ryosuke (2025-07)
    High-Sensitivity Interlayer Force Measurement and Multi-Layer Smoothing Control for 3D Printing on Uneven Surfaces
  21. Kontovourkis Odysseas, Georgiou Christos, Andreou Alexis, Andreou Vasilis et al. (2025-06)
    Measuring and Evaluating Layer Height to Width Ratio in 3DCP Towards Higher Geometric Conformity
  22. Tang Boyang, Yan Jiachuan, Han Xiaoyu, Lin Yini et al. (2025-05)
    Mechanical Properties of Extrusion-Based 3D-Printed Concrete Considering the Thickness of the Printed Layer and Printing Time Interval
  23. An Dong, Rahman Mahfuzur, Zhang Y., Yang Chunhui (2025-05)
    Effects of Key 3D Concrete Printing Process Parameters on Layer Shape:
    Experimental Study and Smooth Particle Hydrodynamics Modelling
  24. Liu Qiong, Wang Qiming, Sun Chang, Li Jiawang et al. (2025-01)
    Inter-Layer Shear Strength and Bonding Strength of Sinuous 3D Printed Mortar
  25. Jiang Youbau, Gao Pengxiang, Adhikari Sondipon, Yao Xiaofei et al. (2024-12)
    Studies on the Mechanical Properties of Inter-Layer Interlocking 3D Printed Concrete Based on a Novel Nozzle
  26. Mousavi Moein, Bengar Habib, Mousavi Fateme, Mahdavinia Pooneh et al. (2024-12)
    Inter-Layer Bond Strength Prediction of 3D Printable Concrete Using Artificial Neural Network:
    Experimental and Modeling Study
  27. Medvedev Vyacheslav, Pustovgar Andrey, Adamtsevich Aleksey, Adamtsevich Liubov et al. (2024-11)
    Improving Inter-Layer Adhesion of Cementitious Materials for 3D Construction Printing
  28. Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
    Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
  29. Sreenivas Gagan, Rizzieri Giacomo, Bhattacherjee Shantanu, Jain Smrati et al. (2024-11)
    Experimental and Numerical Assessment of Layer Deformation in a 3D Printed Concrete Element
  30. Mandala Venugopal, Khan Mohd (2024-11)
    Experimental Investigations on Layered Functionally Graded Fiber-Reinforced Concrete
  31. Yang Yekai, Zhang Chiyu, Liu Zhongxian, Dong Liang et al. (2024-10)
    Effect of Hydration Process on the Inter-Layer Bond Tensile Mechanical Properties of Ultra-High-Performance Concrete for 3D Printing
  32. Bang Jin, Yim Hong (2024-10)
    Unbonded Inter-Layer Evaluation in Freshly 3D Printed Concrete Using Electrical Resistivity Measurements
  33. Liu Chao, Zhang Yukun, Liu Huawei, Wu Yiwen et al. (2024-10)
    Inter-Layer Reinforced 3D Printed Concrete with Recycled Coarse Aggregate:
    Shear Properties and Enhancement Methods
  34. Yu Ke-Ke, Zhao Tai-Qi, Lou Qi-Ling, Ping Yang (2024-10)
    Recycled PET Fibers with Dopamine Surface Modification for Enhanced Inter-Layer Adhesion in 3D Printed Concrete
  35. Lin Yini, Yan Jiachuan, Sun Ming, Han Xiaoyu et al. (2024-10)
    Inter-Layer Cohesion in 3D Printed Concrete:
    The Role of Width-to-Height-Ratio in Modulating Transport Properties and Pore-Structure
  36. Ding Yao, Ou Xingjian, Qi Hongtuo, Xiong Gang et al. (2024-10)
    Inter-Layer Bonding Performance of 3D Printed Engineered Cementitious Composites:
    Rheological Regulation and Fiber Hybridization
  37. Sahai Rajan, Bisht Ravindra, Kumar Shivam, Singh Siddharth et al. (2024-10)
    Modeling and Simulation of 3D Printed Concrete Layers and Validation Using Gantry Robotic Printer
  38. Subramaniam Kolluru, Paritala Spandana, Kulkarni Omkar, Thakur Manideep (2024-09)
    Fracture in 3D Printed Concrete Beams:
    Deflection and Penetration of Impinging Cracks at Layer Interfaces
  39. Chen Baixi, Zhao Xueqi, Qian Xiaoping (2024-09)
    Voxel-Based Path-Driven 3D Concrete Printing Process Simulation Framework Embedding Inter-Layer Behavior
  40. Vele Jiří, Melter Oto, Hvizdal Ales, Achten Henri et al. (2024-09)
    Enhancing 3D Concrete Printing Buildability with Non-Planar Layering:
    A Case Study
  41. Cao Jing, Shengzhao E., Yang Yi, Shi Yaming et al. (2024-09)
    A Strategy for the Improvement of the Bonding Performance of 3D Printed Concrete Inter-Layer Interfaces
  42. He Lewei, Pan Jiahui, Hee Yu, Chen Hao et al. (2024-09)
    Development of Novel Concave and Convex Trowels for Higher Inter-Layer Strength of 3D Printed Cement-Paste
  43. Miranda Luiza, Lesage Karel, Schutter Geert, Roussel Nicolas (2024-09)
    Zone-Based Analysis of Layer Deformation in 3D Concrete Printing:
    Shoulder, Steady-State, and Foot Zones
  44. Lachmayer Lukas, Quantz Jelle, Heeren Hauke, Recker Tobias et al. (2024-09)
    A Spatial Multi-Layer Control-Concept for Strand-Geometry-Control in Robot-Based Additive Manufacturing-Processes
  45. Soave Francesco, Muciaccia Giovanni, Ferrara Liberato (2024-09)
    Experimental Setup for Shear and Inter-Layer Bonding in a 3D Printed Concrete Framework
  46. Versteege Jelle, Wolfs Robert, Salet Theo (2024-09)
    A Data-Driven View on Digital Fabrication with Concrete:
    The Case of Inter-Layer Bond Strength
  47. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-09)
    Enhancing Inter-Layer Bond Strength and Flexural Performance in 3D Concrete Printing with SHCC Bonding Agents
  48. Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2024-09)
    Comparative Study into the Inter-Layer Bond Strength of 3D Printed Mortar:
    Underwater vs. Air Environments
  49. Mostert Jean-Pierre, Kruger Jacques (2024-09)
    Improving Durability Performance of 3D Printed Concrete via Topological Interlocking of Layers
  50. Daadouch Koussay, Reinold Janis, Meschke Günther (2024-09)
    Numerical Simulation of 3D Concrete Printing:
    From the Layer- to the Structural-Scale
  51. Zhao Cong, Wang Hailong, Sun Xiaoyan (2024-09)
    Cross-Layer Reinforcement Robot for 3D Printing Concrete:
    Hardware, Software, and Validation
  52. Bang Jin, Yim Hong (2024-09)
    Non-Destructive Evaluation for the Unbonded Inter-Layer of 3D Printed Concrete
  53. Lowke Dirk, Anton Ana-Maria, Buswell Richard, Jenny Ercan et al. (2024-09)
    Digital Fabrication with Concrete Beyond Horizontal Planar Layers
  54. Vatandoost Mohsen, McGee Wesley, Buelow Peter (2024-08)
    Ultra-Thin-Layered 3D Printed Hollow-Core Sections for Concrete Casting
  55. Buschmann Birger, Henke Klaudius, Asshoff Carsten, Talke Daniel et al. (2024-08)
    Additive Manufacturing of Wood-Composite-Parts by Individual Layer Fabrication:
    Influence of Process Parameters on Product Properties
  56. Li Xiaoteng, Newlands Moray, Jones Rod (2024-08)
    Performance of a Multi-Layer Aligned Steel-Fiber-Reinforced Concrete Beam:
    A Preliminary Investigation Towards 3D Printing
  57. Sahai Rajan, Bisht Ravindra, Singh Siddharth, Panigrahi Soraj (2024-07)
    Design-Analysis and Development of a Gantry Robot for Multi-Layer 3D Concrete Printing with Simulation and Experimental Validation
  58. Silva João, Wagner Gabriel, Silva Rafael, Morais António et al. (2024-07)
    Real-Time Precision in 3D Concrete Printing:
    Controlling Layer Morphology via Machine Vision and Learning Algorithms
  59. Luo Qiling, Yu Ke-Ke, Long Wujian, Zheng Shuyi et al. (2024-07)
    Influence of Different Types of Superabsorbent Polymers on Fresh Mechanical Properties and Inter-Layer Adhesion of 3D Printed Concrete
  60. Gerong Wangdui, Wang Pengfei, Liao Minmao, Chen Zhaohui et al. (2024-07)
    Interfacial Cracking at Layer and Filament Interfaces of 3D Printed Concrete:
    Experimental and Numerical Studies
  61. Lee Yoon, Lee Sang, Kim Jae, Jeong Hoseong et al. (2024-07)
    Inter-Layer Bond Strength of 3D Printed Concrete Members with Ultra-High-Performance Concrete Mix
  62. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
    Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete
  63. He Lewei, Chen Bingzhi, Liu Qimin, Chen Hao et al. (2024-07)
    A Quasi-Exponential Distribution of Interfacial Voids and Its Effect on the Inter-Layer Strength of 3D Printed Concrete
  64. To Quoc, Pham Koa, Lee Gayoon, Shin Myoungsu et al. (2024-06)
    Experimental and FEM Evaluation of the Influence of Inter-Layer Bonding Strength in 3D Printed Concrete Members Under Compressive and Flexural Loadings
  65. Ostovari Shadi, Shayani Hooman (2024-06)
    Simulation and Analysis of Automated Generalised Interleaved Layered Execution (AGILE) Process for Concrete Shell-Structures
  66. Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-05)
    Enhancing Inter-Layer Bonding Strength of 3D Printed Ternary Geopolymer Using Calcium-Carbonate-Whiskers Spray
  67. Gu Yucun, Zheng Shuyi, Ma Hongyan, Long Wujian et al. (2024-05)
    Effect of Absorption Kinetics of Superabsorbent Polymers on Printability and Inter-Layer Bond of 3D Printing Concrete
  68. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2024-05)
    Effect of Time Interval on the Inter-Layer Adhesion of 3D Printed Concrete with Recycled Sand:
    Multi-Factor Influencing Mechanisms and Superabsorbent Polymer Enhancement
  69. Wei Ying, Han Song, Yu Shiwei, Chen Ziwei et al. (2024-05)
    Parameter Impact on 3D Concrete Printing from Single to Multi-Layer Stacking
  70. Salaimanimagudam M., Jayaprakash Jaganathan (2024-04)
    Effect of Introducing Dummy Layers on Inter-Layer Bonding and Geometrical Deformations in Concrete 3D Printing
  71. Tripathi Avinaya, Nair Sooraj, Chauhan Harshitsinh, Neithalath Narayanan (2024-04)
    Print Geometry Alterations and Layer-Staggering to Enhance Mechanical Properties of Plain and Fiber-Reinforced Three-Dimensional-Printed Concrete
  72. Skibicki Szymon, Szewczyk Piotr, Majewska Julia, Sibera Daniel et al. (2024-03)
    The Effect of Inter-Layer Adhesion on Stress-Distribution in 3D Printed Beam Elements
  73. Liu Xinhao, Hu Jiajun, Guo Xiaolu (2024-03)
    Printability and Inter-Layer Bonding Property of 3D Printed Fiber-Reinforced Geopolymer
  74. Wu Yun-Chen, Wang Xinbo, Li Mo (2024-03)
    Role of Thixotropy in Inter-Layer Microstructure and Properties of Additively Manufactured Cementitious Materials
  75. İlcan Hüseyin, Özkılıç Hamza, Tuğluca Merve, Şahmaran Mustafa (2024-02)
    Inter-Layer Mechanical Performance of 3D Printed Cementitious Systems:
    A Comprehensive Study on Operational and Material Parameters
  76. Wu Dinglue, Luo Qiling, Long Wujian, Zhang Shunxian et al. (2024-02)
    Advancing Construction 3D Printing with Predictive Inter-Layer Bonding Strength:
    A Stacking Model Paradigm
  77. Xiao Jianzhuang, Bai Meiyan, Wu Yuching, Duan Zhenhua et al. (2024-01)
    Inter-Layer Bonding Strength and Pore Characteristics of 3D Printed Engineered Cementitious Composites
  78. Yu Hao, Zhang Weiwei, Yin Binbin, Sun Weikang et al. (2024-01)
    Modeling Extrusion-Process and Layer-Deformation in 3D Concrete Printing via Smoothed Particle-Hydrodynamics
  79. Tang Yuxiang, Xiao Jianzhuang, Ding Tao, Liu Haoran et al. (2024-01)
    Trans-Layer and Inter-Layer Fracture Behavior of Extrusion-Based 3D Printed Concrete Under Three-Point Bending
  80. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2023-12)
    3D Concrete Printing in Air and Under Water:
    A Comparative Study on the Buildability and Inter-Layer Adhesion
  81. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2023-12)
    Effect of Grain-Size and Layer-Thickness on Hardened State Properties in Selective Cement-Activation
  82. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2023-11)
    Constitutive Response and Failure Progression in Digitally Fabricated 3D Printed Concrete Under Compression and Their Dependence on Print Layer-Height
  83. Markin Slava, Mechtcherine Viktor (2023-10)
    The Effect of Layer Cross-Section on Plastic Shrinkage Cracking of 3D Printed Concrete Elements
  84. Şahin Hatice, Mardani Ali (2023-10)
    How Does Rheological Behavior Affect the Inter-Layer Bonding Strength of 3DPC Mixtures?
  85. Conrad John, Spencer Lawson, Amador Robert, Linnehan Tyler et al. (2023-09)
    Concrete Printed Gyroid Column:
    A Structurally Optimized, Sand Layer Supported Printing Method
  86. Khademi Pooria, Toufigh Vahab (2023-09)
    Data-Driven-Based Ultrasonics-Analysis for Evaluating the Bond-Strength of Concrete-Layers
  87. Yin Yunchao, Huang Jian, Wang Tiezhu, Yang Rong et al. (2023-09)
    Effect of Hydroxypropyl-Methylcellulose on Rheology and Printability of the First Printed Layer of Cement Activated Slag-Based 3D Printing Concrete
  88. Paritala Spandana, Kamakshi Tippabhotla, Subramaniam Kolluru (2023-09)
    Influence of Inter-Layer Interfaces on Fracture Behavior of 3D Printed Concrete
  89. Saravanan Pradeep, Ramaswamy Ananth (2023-09)
    Numerical Investigation on Inter-Layer and Filament Fracture Behavior of 3D Printed Concrete
  90. Surehali Sahil, Tripathi Avinaya, Neithalath Narayanan (2023-08)
    Anisotropy in Additively Manufactured Concrete Specimens Under Compressive Loading:
    Quantification of the Effects of Layer-Height and Fiber-Reinforcement
  91. Ghosh Debalina, Anleu Paula, Pape Yann, Ma Zhonggoue (2023-07)
    Effect of Inter-Layer-Time-Lapse and Workability-Retention on Printed Concrete Performance
  92. Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2023-07)
    Numerical Simulation of the Extrusion and Layer-Deposition-Processes in 3D Concrete Printing with the Particle-Finite-Element-Method
  93. Zhang Yu, Yang Lin, Qian Rusheng, Liu Guojian et al. (2023-07)
    Inter-Layer Adhesion of 3D Printed Concrete:
    Influence of Layer Stacked Vertically
  94. Han Xiaoyu, Yan Jiachuan, Chen Tiefeng, Tang Boyang et al. (2023-07)
    Plastic Shrinkage of 3D Printed Concrete Under Different Self-Weight of Upper Layers
  95. Dang Thi, Tran Mien (2023-07)
    Variation of the Adhesion Between Concrete Printed Layers in a 3D Concrete Printed Structure
  96. Kalthoff Matthias, Bosbach Sven, Backes Jana, Cruz Cynthia et al. (2023-06)
    Fabrication of Lightweight, Carbon Textile Reinforced Concrete Components with Internally Nested Lattice Structure Using 2-Layer Extrusion by LabMorTex
  97. Munemo Rue, Kruger Jacques, Zijl Gideon (2023-06)
    Improving Inter-Layer Bond in 3D Printed Concrete Through Induced Thermo-Hydrokinetics
  98. Soares Augusto, Rodrigues Ana, Costa Hugo, Carmo Ricardo et al. (2023-06)
    Bond Between Layers of Cementitious Mortars Developed for 3D Printing
  99. Pietras Daniel, Zbyszyński Wojciech, Sadowski Tomasz (2023-06)
    A 3D Printing Method of Cement-Based FGM Composites Containing Granulated Cork, Polypropylene Fibers, and a Polyethylene Net Inter-Layer
  100. Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2023-05)
    Microstructure and Mechanical Properties of Inter-Layer Regions in Extrusion-Based 3D Printed Concrete:
    A Critical Review
  101. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Šeta Berin et al. (2023-05)
    Computational Analysis of Yield-Stress-Buildup and Stability of Deposited Layers in Material-Extrusion Additive Manufacturing
  102. Rekhi Jagruti, Stern Alaina (2023-04)
    3D Concrete Printed Construction:
    Building the Future of Housing, Layer-by-Layer
  103. Zbyszyński Wojciech, Pietras Daniel, Sadowski Tomasz (2023-04)
    Data-Image-Correlation-Analysis of the Destruction-Process of 3D Printable Layered Beams Subjected to the Three-Point Bending Process
  104. Allameh Seyed, Miller Roger (2023-02)
    Evaluating the Structural Strength of Layered Concrete Reinforced with 3D-Welded Rebar
  105. Şahin Hatice, Mardani Ali (2023-02)
    Mechanical Properties, Durability Performance and Inter-Layer Adhesion of 3DPC Mixtures:
    A State‐of‐the‐art Review
  106. Surehali Sahil, Tripathi Avinaya, Nimbalkar Atharwa, Neithalath Narayanan (2023-01)
    Anisotropic Chloride Transport in 3D Printed Concrete and Its Dependence on Layer-Height and Interface-Types
  107. Yang Weiyi, Huang Zili, Verma Rupesh, Nguyen Giang et al. (2023-01)
    Effect of Layer-Orientation on Behavior of 3D Printed Rock Specimens in Indirect Tensile Testing
  108. Yang Liming, Sepasgozar Samad, Shirowzhan Sara, Kashani Alireza et al. (2022-12)
    Nozzle Criteria for Enhancing Extrudability, Buildability and Inter-Layer Bonding in 3D Printing Concrete
  109. Jenny Ercan, Pietrasik Lukasz, Sounigo Eliott, Tsai Ping-Hsun et al. (2022-11)
    Continuous Mobile Thin-Layer On-Site Printing
  110. Lv Chun, Shen Hongtao, Liu Jie, Wu Dan et al. (2022-11)
    Properties of 3D Printing Fiber-Reinforced Geopolymers Based on Inter-Layer Bonding and Anisotropy
  111. Yang Rijiao, Zhu Yi, Lan Yan, Zeng Qiang et al. (2022-10)
    Differences in Micro Grain & Fiber-Distributions Between Matrix and Inter-Layer of Cementitious Filaments Affected by Extrusion-Molding
  112. Cicione Antonio, Kruger Jacques, Mostert Jean-Pierre, Walls Richard et al. (2022-09)
    The Effect of Wind on 3D Printed Concrete Inter-Layer Bond Strength Based on Machine Learning Algorithms
  113. Licciardello Lucia, Reggia Adriano, Metelli Giovanni, Plizzari Giovanni (2022-09)
    Investigation of the Inter-Layer Strength of 3D Printed Concrete Shear Walls
  114. He Lewei, Li Hua, Chow Wai, Zeng Biqing et al. (2022-09)
    Increasing the Inter-Layer Strength of 3D Printed Concrete with Tooth-Like Interface:
    An Experimental and Theoretical Investigation
  115. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-09)
    3D Printing Concrete with Recycled Coarse Aggregates:
    The Influence of Pore-Structure on Inter-Layer Adhesion
  116. Jenny Ercan, Mitterberger Daniela, Lloret-Fritschi Ena, Vasey Lauren et al. (2022-09)
    Robotic On-Site Adaptive Thin-Layer Printing:
    Challenges and Workflow for Design and Fabrication of Bespoke Cementitious Plasterwork at Full-Architectural-Scale
  117. Barjuei Erfan, Courteille Eric, Rangeard Damien, Marie F. et al. (2022-07)
    Real-Time Vision-Based Control of Industrial Manipulators for Layer-Width Setting in Concrete 3D Printing Applications
  118. Zhang Hongping, Liu Yaling, Cheng Zhi, Zhao Zhiyi (2022-07)
    Effect of Layering Molding Process on Strength of 3D Printed Composite Cement-Based Materials
  119. Maier Marcus, Lees Janet (2022-07)
    Inter-Layer Fracture Behavior of Functionally Layered Concrete
  120. Farahbakhsh Mehdi, Rybkowski Zofia, Zakira Umme, Kalantar Negar et al. (2022-07)
    Impact of Robotic 3D Printing Process Parameters on Inter-Layer Bond Strength
  121. Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping (2022-07)
    How Do the Contact Surface Forces Affect the Inter-Layer Bond Strength of 3D Printed Mortar?
  122. Asakawa Tomoya, Nishiwaki Tomoya, Ohno Kazunori, Yokoyama Shigeru et al. (2022-06)
    Fundamental Study on Automated Inter-Layer Reinforcing System with Metal-Fiber-Insertion for 3D Concrete Printer
  123. Moelich Gerrit, Rensburg Johannes, Kruger Jacques, Combrinck Riaan (2022-06)
    The Environment’s Effect on the Inter-Layer Bond Strength of 3D Printed Concrete
  124. Yuan Qiang, Xie Zonglin, Yao Hao, Huang Tingjie et al. (2022-06)
    Effect of Polyacrylamide on the Workability and Inter-Layer Interface Properties of 3D Printed Cementitious Materials
  125. Ekanayaka Virama, Lachmayer Lukas, Raatz Annika, Hürkamp André (2022-06)
    Approach to Optimize the Inter-Layer Waiting Time in Additive Manufacturing with Concrete Utilizing FEM Modeling
  126. Jenny Ercan, Lloret-Fritschi Ena, Jenny David, Sounigo Eliott et al. (2022-06)
    Robotic Plaster Spraying:
    Crafting Surfaces with Adaptive Thin-Layer Printing
  127. Hager Izabela, Maroszek Marcin, Mróz Katarzyna, Kęsek Rafał et al. (2022-06)
    Inter-Layer Bond Strength Testing in 3D Printed Mineral Materials for Construction Applications
  128. Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
    Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
    A Review
  129. Shkundalova Olena, Molkens Tom, Claßen Martin, Rossi Barbara (2022-05)
    Computational Modelling of Material-Behavior of Layered 3D Printed Concrete
  130. Wijaya Ignasius, Kreiger Eric, Masud Arif (2022-05)
    An Elastic‐Inelastic Model and Embedded Bounce‐Back-Control for Layered Printing with Cementitious Materials
  131. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2022-05)
    Bonding Strength of Steel-Rebars Perpendicular to the Hardened 3D Printed Concrete-Layers
  132. Yang Rijiao, Zeng Qiang, Peng Yu, Wang Hailong et al. (2022-05)
    Anomalous Matrix and Inter-Layer Pore-Structure of 3D Printed Fiber-Reinforced Cementitious Composites
  133. Huang Xin, Yang Weihao, Song Fangnian, Zou Jiuqun (2022-04)
    Study on the Mechanical Properties of 3D Printing Concrete Layers and the Mechanism of Influence of Printing Parameters
  134. Chen Yu, Chang Ze, He Shan, Çopuroğlu Oğuzhan et al. (2022-04)
    Effect of Curing Methods During a Long Time-Gap Between Two Printing Sessions on the Inter-Layer Bonding of 3D Printed Cementitious Materials
  135. Pan Tinghong, Jiang Yaqing, Ji Xuping (2022-03)
    Inter-Layer Bonding Investigation of 3D Printing Cementitious Materials with Fluidity-Retaining Polycarboxylate-Superplasticizer and High-Dispersion Polycarboxylate Superplasticizer
  136. Zhang Chao, Deng Zhicong, Chen Chun, Zhang Yamei et al. (2022-03)
    Predicting the Static Yield-Stress of 3D Printable Concrete Based on Flowability of Paste and Thickness of Excess-Paste-Layer
  137. Putten Jolien, Volder Melissa, Heede Philip, Deprez Maxim et al. (2022-03)
    Transport Properties of 3D Printed Cementitious Materials with Prolonged Time-Gap Between Successive Layers
  138. Carneau Paul, Mesnil Romain, Baverel Olivier, Roussel Nicolas (2022-03)
    Layer Pressing in Concrete Extrusion-Based 3D Printing:
    Experiments and Analysis
  139. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
    Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method
  140. Zhang Yu, Qiao Hongxia, Qian Rusheng, Xue Cuizhen et al. (2022-02)
    Relationship Between Water-Transport Behavior and Inter-Layer Voids of 3D Printed Concrete
  141. Raval Amitkumar, Patel C. (2022-02)
    Estimation of Interface-Friction and Concrete-Boundary-Layer for 3D Printable Concrete-Pumping
  142. Xie Xiangyu, Zhang Lihai, Shi Caijun, Liu Xuemei (2022-01)
    Prediction of Lubrication-Layer Properties of Pumped Concrete Based on Flow-Induced Particle-Migration
  143. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Pedersen David et al. (2022-01)
    Numerical Predictions of Bottom-Layer-Stability in Material-Extrusion Additive Manufacturing
  144. Geng Zifan, Wu Peipei, Pan Hao, Zheng Qi et al. (2022-01)
    Robust Layer Interface in Cement Additive Manufacturing via Silicate-Penetration and Precipitation
  145. Sukontasukkul Piti, Panklum Kasidet, Maho Buchit, Banthia Nemkumar et al. (2021-12)
    Effect of Synthetic Micro-Fiber and Viscosity-Modifying-Agent on Layer Deformation, Viscosity, and Open-Time of Cement Mortar for 3D Printing Application
  146. Lee Hojae, Seo Eun-A, Kim Won-Woo, Yang Jun-Mo et al. (2021-12)
    X-Ray CT Analysis of the Cross-Section of a 3D Printed Deformed Layer
  147. Tavangar Tooran, Hosseinpoor Masoud, Yahia Ammar, Khayat Kamal (2021-12)
    Novel Tri-Viscous-Model to Simulate Pumping of Flowable Concrete Through Characterization of Lubrication-Layer and Plug-Zones
  148. Nair Sooraj, Li Anling, Mobasher Barzin, Neithalath Narayanan (2021-12)
    Effect of Layer-Height on Tensile Stress-Distribution and Crack-Width and Propagation in 3D Printed Fiber-Reinforced Flexural Elements
  149. Verian Kho, Ashcroft Jarron, Ziemlaski Jim, Brodesser Tim et al. (2021-12)
    The Assessment of the Buildability and Inter-Layer Adhesion Strength of 3D Printed Mortar
  150. Yao Hao, Xie Zonglin, Li Zemin, Huang Chuhan et al. (2021-11)
    The Relationship Between the Rheological Behavior and Inter-Layer Bonding Properties of 3D Printing Cementitious Materials with the Addition of Attapulgite
  151. Napolitano Rosanna, Forni Daniele, Menna Costantino, Asprone Domenico et al. (2021-11)
    Dynamic Characterization of the Layer-Interface Properties of 3D Printed Concrete Elements
  152. He Lewei, Tan Jolyn, Chow Wai, Li Hua et al. (2021-11)
    Design of Novel Nozzles for Higher Inter-Layer Strength of 3D Printed Cement-Paste
  153. Freund Niklas, Lowke Dirk (2021-11)
    Inter-Layer Reinforcement in Shotcrete 3D Printing
  154. Suiker Akke (2021-11)
    Effect of Accelerated Curing and Layer Deformations on Structural Failure During Extrusion-Based 3D Printing
  155. Park Jihun, Bui The, Lee Jungwoo, Joh Changbin et al. (2021-11)
    Inter-Layer Strength of 3D Printed Mortar Reinforced by Postinstalled Reinforcement
  156. Liu Yu, Jing Rui, Cao Fengze, Yan Peiyu (2021-11)
    Effects of Aggregate Content on Rheological Properties of Lubrication-Layer and Pumping Concrete
  157. Spangenberg Jon, Silva Wilson, Comminal Raphaël, Mollah Md. et al. (2021-10)
    Numerical Simulation of Multi-Layer 3D Concrete Printing
  158. Gebhard Lukas, Mata-Falcón Jaime, Markić Tomislav, Kaufmann Walter (2021-09)
    Aligned Inter-Layer Fiber-Reinforcement for Digital Fabrication with Concrete
  159. Xu Yanqun, Yuan Qiang, Li Zemin, Shi Caijun et al. (2021-09)
    Correlation of Inter-Layer Properties and Rheological Behaviors of 3DPC with Various Printing Time Intervals
  160. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2021-09)
    Examining Layer-Height Effects on the Flexural and Fracture Response of Plain and Fiber-Reinforced 3D Printed Beams
  161. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-09)
    Inter-Layer Bond and Porosity of 3D Printed Concrete
  162. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2021-09)
    Modelling the Inter-Layer Bond Strength of 3D Printed Concrete with Surface Moisture
  163. Liu Chenkang, Yue Songlin, Zhou Cong, Sun Honglei et al. (2021-08)
    Anisotropic Mechanical Properties of Extrusion-Based 3D Printed Layered Concrete
  164. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2021-08)
    Experimental Calibration and Compensation for the Continuous Effect of Time, Number of Layers and Volume of Material on Shape Deformation in Small-Scale Additive Manufacturing of Concrete
  165. Wang Li, Ma Guowei, Liu Tianhao, Buswell Richard et al. (2021-07)
    Inter-Layer Reinforcement of 3D Printed Concrete by the In-Process Deposition of U-Nails
  166. Fataei Shirin, Secrieru Egor, Mechtcherine Viktor, Roussel Nicolas (2021-07)
    A First-Order Physical Model for the Prediction of Shear-Induced Particle-Migration and Lubricating-Layer Formation During Concrete Pumping
  167. Babafemi Adewumi, Kolawole John, Miah Md, Paul Suvash et al. (2021-06)
    A Concise Review on Inter-Layer Bond Strength in 3D Concrete Printing
  168. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2021-06)
    Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete:
    Correction
  169. Helsel Michelle, Popovics John, Stynoski Peter, Kreiger Eric (2021-03)
    Non-Destructive Testing to Characterize Inter-Layer Bonds of Idealized Concrete Additive Manufacturing Products
  170. Weng Yiwei, Li Mingyang, Zhang Dong, Tan Ming et al. (2021-02)
    Investigation of Inter-Layer Adhesion of 3D Printable Cementitious Material from the Aspect of Printing-Process
  171. Weng Yiwei, Li Mingyang, Wong Teck, Tan Ming (2021-01)
    Synchronized Concrete and Bonding-Agent-Deposition-System for Inter-Layer Bond Strength Enhancement in 3D Concrete Printing
  172. Pan Tinghong, Jiang Yaqing, He Hui, Wang Yu et al. (2021-01)
    Effect of Structural Build-Up on Inter-Layer Bond Strength of 3D Printed Cement Mortars
  173. Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
    Improving Performance of Additive Manufactured Concrete:
    A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
  174. Salman Nazar, Ma Guowei, Ijaz Nauman, Wang Li (2021-01)
    Weak Inter-Layer Bonding in Extrusion 3D Concrete Printing:
    A Comparative Analysis of Mitigation Techniques
  175. Cicione Antonio, Mazolwana K., Kruger Jacques, Walls Richard et al. (2020-12)
    Effect of Transverse and Longitudinal Confinement on the Inter-Layer Bond in 3D Printed Concrete at Elevated Temperatures:
    An Experimental Study
  176. Baz Bilal, Aouad Georges, Khalil Noura, Rémond Sébastien (2020-11)
    Inter-Layer Reinforcement of 3D Printed Concrete Elements
  177. Matthäus Carla, Kofler Nadine, Kränkel Thomas, Weger Daniel et al. (2020-10)
    Inter-Layer Reinforcement Combined with Fiber-Reinforcement for Extruded Lightweight Mortar Elements
  178. Davtalab Omid, Kazemian Ali, Yuan Xiao, Khoshnevis Behrokh (2020-10)
    Automated Inspection in Robotic Additive Manufacturing Using Deep Learning for Layer Deformation Detection
  179. Geng Zifan, She Wei, Zuo Wenqiang, Lyu Kai et al. (2020-09)
    Layer-Interface Properties in 3D Printed Concrete:
    Dual Hierarchical Structure and Micromechanical Characterization
  180. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-09)
    Effect of Microwave-Heating on Inter-Layer Bonding and Buildability of Geopolymer 3D Concrete Printing
  181. Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
    Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
    An Experimental and Numerical Study
  182. Henke Klaudius, Talke Daniel, Matthäus Carla (2020-07)
    Additive Manufacturing by Extrusion of Lightweight Concrete:
    Strand Geometry, Nozzle Design and Layer Layout
  183. Napolitano Rosanna, Menna Costantino, Forni Daniele, Asprone Domenico et al. (2020-07)
    Dynamic Behavior of Layered 3D Printed Concrete Elements
  184. Napolitano Rosanna, Menna Costantino, Asprone Domenico, Giudice Lorenzo (2020-07)
    Mechanical Characterization of Layer-by-Layer Interface in Concrete Elements Obtained by Additive Manufacturing
  185. Wu Yun-Chen, Cotrell Jason, Li Mo (2020-07)
    Inter-Layer Effect on Fracture Behavior of 3D Printing Concrete
  186. Carneau Paul, Mesnil Romain, Ducoulombier Nicolas, Roussel Nicolas et al. (2020-07)
    Characterisation of the Layer-Pressing-Strategy for Concrete 3D Printing
  187. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
    Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
  188. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-07)
    Influence of Processing Parameters on the Layer Geometry in 3D Concrete Printing:
    Experiments and Modelling
  189. Ding Tao, Xiao Jianzhuang, Zou Shuai, Wang Yu (2020-06)
    Hardened Properties of Layered 3D Printed Concrete with Recycled Sand
  190. He Lewei, Chow Wai, Li Hua (2020-06)
    Effects of Inter-Layer Notch and Shear Stress on Inter-Layer Strength of 3D Printed Cement-Paste
  191. Putten Jolien, Azima M., Heede Philip, Mullem T. et al. (2020-06)
    Neutron-Radiography to Study the Water-Ingress via the Inter-Layer of 3D Printed Cementitious Materials for Continuous Layering
  192. Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
    Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing
  193. Perrot Arnaud, Jacquet Yohan, Rangeard Damien, Courteille Eric et al. (2020-03)
    Nailing of Layers:
    A Promising Way to Reinforce Concrete 3D Printing Structures
  194. Wang Li, Tian Zehao, Ma Guowei, Zhang Mo (2020-02)
    Inter-Layer Bonding Improvement of 3D Printed Concrete with Polymer-Modified Mortar:
    Experiments and Molecular Dynamics Studies
  195. Torelli Giacomo, Fernández Mar, Lees Janet (2020-02)
    Functionally Graded Concrete:
    Design Objectives, Production Techniques and Analysis Methods for Layered and Continuously Graded Elements
  196. Ma Guowei, Salman Nazar, Wang Li, Wang Fang (2020-02)
    A Novel Additive Mortar Leveraging Internal Curing for Enhancing Inter-Layer Bonding of Cementitious Composite for 3D Printing
  197. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-01)
    The Effect of Accelerator Dosage on Fresh Concrete Properties and on Inter-Layer Strength in Shotcrete 3D Printing
  198. Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-11)
    Investigation into the Effect of Delays Between Printed Layers on the Mechanical Strength of Inkjet 3DP Mortar
  199. Putten Jolien, Schutter Geert, Tittelboom Kim (2019-07)
    Surface-Modification as a Technique to Improve Inter-Layer Bonding Strength in 3D Printed Cementitious Materials
  200. Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
    The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete
  201. Keita Emmanuel, Bessaies-Bey Hela, Zuo Wenqiang, Belin Patrick et al. (2019-06)
    Weak Bond Strength Between Successive Layers in Extrusion-Based Additive Manufacturing:
    Measurement and Physical Origin
  202. Jie G., Jie B., Hongxue J. (2019-05)
    Experimental Study on Layer Bonding Property of 3D Printing Building Materials
  203. Hosseini Ehsan, Zakertabrizi Mohammad, Korayem Asghar, Xu Guanzhong (2019-03)
    A Novel Method to Enhance the Inter-Layer Bonding of 3D Printing Concrete:
    An Experimental and Computational Investigation
  204. Wolfs Robert, Bos Freek, Salet Theo (2019-03)
    Hardened Properties of 3D Printed Concrete:
    The Influence of Process Parameters on Inter-Layer Adhesion
  205. Marchment Taylor, Sanjayan Jay, Xia Ming (2019-03)
    Method of Enhancing Inter-Layer Bond Strength in Construction-Scale 3D Printing with Mortar by Effective Bond Area Amplification
  206. Marchment Taylor, Sanjayan Jay, Nematollahi Behzad, Xia Ming (2019-02)
    Inter-Layer Strength of 3D Printed Concrete
  207. Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
    Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing
  208. Chaar Ghassan, Stynoski Peter, Banko Marion (2018-11)
    Structural Behavior of Layer-Printed Reinforced Concrete Beams
  209. Prasittisopin Lapyote, Taweekarn Naphat, Chuaysiri Chanita, Snguanyat Chalermwut (2018-11)
    Printing and Fabrication Processes of Curvature Single-Layered Wall House Printed by 3D Extrusion-Printer
  210. Ashrafi Negar, Duarte José, Nazarian Shadi, Meisel Nicholas (2018-10)
    Evaluating the Relationship Between Deposition and Layer-Quality in Large-Scale Additive Manufacturing of Concrete
  211. Marchment Taylor, Sanjayan Jay (2018-09)
    Method of Enhancing Inter-Layer Bond Strength in 3D Concrete Printing
  212. Al-Qutaifi Sarah, Nazari Ali, Bagheri Ali (2018-07)
    Mechanical Properties of Layered Geopolymer Structures Applicable in Concrete 3D Printing
  213. Secrieru Egor, Khodor Jad, Schröfl Christof, Mechtcherine Viktor (2018-05)
    Formation of Lubricating Layer and Flow Type During Pumping of Cement-Based Materials
  214. Zareiyan Babak, Khoshnevis Behrokh (2018-04)
    _Effects of Mixture Ingredients on Inter-Layer Adhesion of Concrete in Contour Crafting
  215. Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2018-04)
    Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete
  216. Zareiyan Babak, Khoshnevis Behrokh (2017-08)
    Effects of Interlocking on Inter-Layer Adhesion and Strength of Structures in 3D Printing of Concrete
  217. Zareiyan Babak, Khoshnevis Behrokh (2017-06)
    Inter-Layer Adhesion and Strength of Structures in Contour Crafting:
    Effects of Aggregate-Size, Extrusion-Rate, and Layer-Thickness
  218. Lim Sungwoo, Buswell Richard, Valentine Philip, Piker Daniel et al. (2016-06)
    Modelling Curved-Layered Printing Paths for Fabricating Large-Scale Construction Components
  219. Le H., Kadri Hadj, Aggoun Salima, Vierendeels Jan et al. (2015-01)
    Effect of Lubrication-Layer on Velocity-Profile of Concrete in a Pumping Pipe
  220. Choi Myoungsung, Roussel Nicolas, Kim Youngjin, Kim Jinkeun (2013-01)
    Lubrication-Layer Properties During Concrete Pumping