#bond
Keywords by Co - Occurrence
- Tang Boyang, Yan Jiachuan, Han Xiaoyu, Lin Yini et al. (2026-04)
Failure Mechanisms of 3D Printed Formwork Arches: The Critical Role of Interfacial Bond and Manufacturing Parameters
- Sun Hou-Qi, Zhou Jie-Kai, Xia Jun-Run, Zheng Jun-Jie et al. (2026-03)
Interface Bonding Enhancement for FRP Grid Reinforced 3D-Printed Concrete Structures
- Xu Wenbin, Xu Zihao, Liu Tao, Ouyang Jun et al. (2026-03)
A Prediction Model of Interlayer Bond Strength for 3D-Printed Concrete Considering Printing Interval and Environmental Effects
- Maurya Shubham, Panda Biranchi, Dixit Uday (2026-03)
Experimental Study on Void Reduction and Bonding Behavior in 3D Concrete Printing with a Trowel-Integrated Nozzle
- Omarov Bekarys, Ali Md., Memon Shazim (2026-03)
A Novel Method to Enhance Interlayer Bond in 3D-Printed Concrete Using Dry-Powder Application of Supplementary Cementitious Materials
- Žižková Nikol, Válek Josef, Vespalec Arnošt, Melichar Jindřich et al. (2026-03)
Layer Bond Strength in 3D-Printed Concrete:
The Role of Interlayer Surface Area and Printing Delay Time
- Kim J.-S., Yoo C., Yang Y. (2026-03)
Microstructural Characterization and Bonding Performance Evaluation of 3D-Printed Concrete-Mortar Composites
- Chen Baixi, Wang Xianlin, Zhou Haijun, Jiang Sheng et al. (2026-03)
Uncertainty Propagation in Reinforcement Bond Performance of 3D-Printed Concrete via Generative-Augmented Ensemble Learning
- Versteege Jelle, Salet Theo, Wolfs Robert (2026-02)
Sensory Data Mapping and Database Development for Interlayer Bond Strength:
Towards Digital Shadows in 3D Concrete Printing
- Liu Huawei, Dai Meiling, Liu Chao, Du Hongjian (2026-02)
Targeted Enhancement Strategy for the Rebar Interface Bond in 3D Printed Coarse Aggregate Concrete: Performance Evaluation and Mechanistic Insights
- Zhang Tong, Wei Jinhui, Chen Meng, Yu Kanghao (2026-02)
Experimental Characterization and Theoretical Modeling of the Bonding Behavior Between FRP Bars and 3D Printed Strain-Hardening Cementitious Composites
- Prakash Pawan, Tripathi Shubham, Zade Nikhil, Shariff Mohammad (2026-02)
Experimental and Numerical Investigation of Bond and Flexural Behaviour of Additively Manufactured Structural Concrete Beams
- Yuan Yong, Zia Syed, Sheikh Taimur, Irfan ul Hassan Muhammad et al. (2026-02)
Enhancing Interlayer Bond Strength of 3D-Printed Concrete Through Microstructural Densification by Means of Incorporating Sugarcane Bagasse Ash
- Dang Thi, Tran Mien, Nguyen Thi, Nguyen Hoang (2026-02)
Large Scale 3D Printed Concrete Wall:
Interlayer Bonding and Shrinkage
- Tang Boyang, Yan Jiachuan, Lin Yini, Han Xiaoyu et al. (2026-02)
Failure Mechanism of Reinforced 3D Printed Concrete Arches:
Transition from Brittle Fracture to Interface Bond-Slip
- Liu Chao, Chen Xianqin, Luo Zhiyu, Liu Huawei et al. (2026-01)
Effects of Pore Defects on Interfacial Bonding Between Rebar and 3D Printed Coarse Aggregate Concrete Under Multiple Loading Conditions
- Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2026-01)
Improving Bond Performance of 3D-Printable Earth-Based Mortar Reinforced with Jute Fibers
- Wang Xiangyu, Wang Sizhe, Deng North, Liu Zhenbang et al. (2026-01)
Robotic Rebar Insertion and Grouting for Reinforcement of 3D Printed Concrete:
Technique Development and Bond Behavior Characterization
- Liu Zhenbang, Li Mingyang, Wang Sizhe, Deng North et al. (2026-01)
Investigation on Bond-Slip Performance of Steel Rebar Embedded in Concrete Confined by 3D Concrete Printing Formwork
- Sheng Zhaoliang, Ding Shaolong, Zhu Binrong, Cai Jingming et al. (2026-01)
Bonding Performance of Toothed Interfaces in 3D Printed Alkali-Activated Concrete
- Pal Biswajit, Chourasia Ajay, Tomar Milan, Pradeep Kumar (2026-01)
Influence of Interfilament Bond Characteristics on the Load–Deflection Behavior of 3D Printed Beam:
A Numerical Study
- Bang Jin, Ha Seong, Jun Yubin, Yim Hong (2025-12)
Optimal Casting Window Defined by Electrical Resistivity for Enhancing Interfacial Bond Strength in 3D Printed-Cast Concrete Composites
- Mostert Jean-Pierre, Kruger Jacques (2025-10)
Numerically Optimised Filament Surface Topology Towards Maximum Bond Strength in 3D Printed Concrete
- Simwanda Lenganji, David Abayomi, Gatheeshgar Perampalam, Olalusi Oladimeji et al. (2025-10)
Optimisation of Interlayer Bond Strength in 3D-Printed Concrete Using Response Surface Methodology and Artificial Neural Networks
- Sun Hou-Qi, Zeng Jun-Jie, Xie Shan-Shan, Xia Jun-Run et al. (2025-09)
Mechanical and Microstructural Characterization of Interlayer Bonding in Multi-Material 3D-Printed Concrete
- Chan Li-Jing, Padil Khairul, Chin Chee-Long, Ibrahim Izni et al. (2025-09)
Strategies to Enhance Interlayer Bonding in 3D Printed Concrete:
A Review
- Syed Sajid, Abid Khasim, Khan Majid (2025-09)
An Interpretable Machine Learning Approach for Predicting Reinforcement Bond Performance in 3D Concrete Printing
- Abid Khasim, Syed Sajid, Khan Majid (2025-08)
Explainable Machine Learning-Based Model for Predicting Interlayer Bond Strength in 3D Printed Concrete
- Miri Zahra, Aurilio R., Polak Maria, Baaj Hassan (2025-08)
Interface Bonding in 3D-Printed Concrete:
Experimental Evaluation and Numerical Modeling
- Singh Amardeep, Anand Kamal, Liu Qiong, Tam Vivian et al. (2025-07)
Enhancing Interlayer Bonding in 3D Printed Concrete Using Bacteria-Based Biomineralization
- Ding Tao, Dong Haining, Sikora Paweł, Lin Guan (2025-07)
3D Printed Concrete Reinforced with Flexible Fiber Reinforced Polymer Strips or Grids:
Concept and Bond Tests
- Cao Yifang, Shen Luming, Mukherjee Abhijit, Abbas Ali et al. (2025-07)
Improvement of the Interlayer Bonding Strength in a 3D-Printed Mortar with Biocement Sprayed into Interlayer Surfaces
- Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-06)
Enhancing Interfacial Bonding and Pore Structure Optimization in 3D-Printed High-Strength ECC with Steel-PE Hybrid Fibers
- Ewerz Johannes, Pfleger Marc-Patrick, Radl Elisabeth, Huber Patrick (2025-06)
Concrete 3D Printing and Reinforcement:
Determination of Bond Strength Through Pull-Out Tests
- Pei Qiang, Zhong Yingzhu, Wang Shuai, Zhang Luxi et al. (2025-06)
Interlayer Bonding Shear Performance and Constitutive Model of 3DPC with Different Fine Aggregate Gradations
- Zhu Xingyi, Anwar Muhammad, Deng Guomin, Wang Xiaoming et al. (2025-05)
Effect of Microwave Heating Under Varying Exposure Conditions on Rheological Properties, Interlayer Bond and Buildability Performance of 3D-Printed Geopolymer
- Munemo Rue, Kruger Jacques, Zijl Gideon (2025-05)
Surface Treatment of 3DPC Interlayers with Silicate-Based Solution for Enhanced Interfacial Bonding
- Chandra Jimmy, Halim Alvin, Budiman Franky, Pudjisuryadi Pamuda et al. (2025-05)
Experimental Study of Bond Strength of Embedded Steel Reinforcement in Vibration-Based 3D Printed Concrete Mortar
- Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2025-04)
Novel Strategy for Enhancing Rheological Properties and Interlayer Bonding in Underwater 3D Concrete Printing
- Li Yifan, Chen Shuisheng, Yang Liuhua, Guo Chuan et al. (2025-02)
Investigation of the Impact of Material Rheology on the Interlayer Bonding Performance of Solid Waste 3D-Printed Components
- Bayat Hamid, Karimpouli Sagegh, Yang Liming, Ramandi Hamed et al. (2025-02)
Investigation of Interlayer Bonding and Pore Characteristics in 3D-Printed High-Strength Mortar Incorporating Recycled Lightweight Aggregates
- Zeng Jun-Jie, Sun Hou-Qi, Deng Run-Bin, Yan Zitong et al. (2025-02)
Bond Performance Between FRP-Bars and 3D-Printed High-Performance Concrete
- Chourasia Ajay, Pal Biswajit, Kapoor Ashish (2025-02)
Influence of Printing Direction and Interlayer Printing Time on the Bond Characteristics and Hardened Mechanical Properties of Agro-Industrial Waste-Based 3D Printed Concrete
- Liu Xinhao, Hu Jiajun, Guo Xiaolu (2025-01)
Improved Interlayer-Bonding of 3D Printed Fiber-Reinforced Geopolymer by Healing-Agents:
Properties, Mechanism, and Environmental Impacts
- Chen Meng, Yu Kanghao, Zhang Tong, Wang Yuting (2025-01)
Characterizing and Modelling the Bond-Slip-Behavior of Steel-Bars in 3D Printed Engineered Cementitious Composites
- Shazad Qamar, Li Fangyuan (2025-01)
Interfacial Bond-Effects on Shear-Strength and Damage in 3D Printed Concrete Structures:
A Combined Experimental and Numerical Study
- Liu Qiong, Wang Qiming, Sun Chang, Li Jiawang et al. (2025-01)
Inter-Layer Shear Strength and Bonding Strength of Sinuous 3D Printed Mortar
- Mousavi Moein, Bengar Habib, Mousavi Fateme, Mahdavinia Pooneh et al. (2024-12)
Inter-Layer Bond Strength Prediction of 3D Printable Concrete Using Artificial Neural Network:
Experimental and Modeling Study
- Bai Meiyan, Xiao Jianzhuang, Ding Tao, Yu Kequan (2024-12)
Interfacial Bond-Properties Between 3D Printed Engineered Cementitious Composite and Post-Cast Concrete
- Luo Surong, Li Wenqiang, Cai Yili, Zhang Kaijian (2024-12)
Effects of Carbonated Recycled Sand on the Interfacial Bonding Performance of 3D Printed Cement-Based Material
- Hass Lauri, Bos Freek, Salet Theo (2024-12)
Bond Governed Interactions Between Helical Reinforcement and 3D Printed Concrete
- Taleb Maria, Bulteel David, Montagne Alex, Roudet Francine et al. (2024-11)
Influence of Thermo-Hygrometric Conditions on the Interface Bond in 3D Printed Concrete
- Yang Yekai, Zhang Chiyu, Liu Zhongxian, Dong Liang et al. (2024-10)
Effect of Hydration Process on the Inter-Layer Bond Tensile Mechanical Properties of Ultra-High-Performance Concrete for 3D Printing
- Ding Yao, Ou Xingjian, Qi Hongtuo, Xiong Gang et al. (2024-10)
Inter-Layer Bonding Performance of 3D Printed Engineered Cementitious Composites:
Rheological Regulation and Fiber Hybridization
- Edmund Dineth, Zahra Tatheer, Asad Mohammad, Thamboo Julian (2024-09)
Experimental Investigation on Tensile-Characteristics of 3D Printed Auxetic-Embedded Cementitious Composites and Shear-Bonding Behavior to Masonry
- Cao Jing, Shengzhao E., Yang Yi, Shi Yaming et al. (2024-09)
A Strategy for the Improvement of the Bonding Performance of 3D Printed Concrete Inter-Layer Interfaces
- Ivaniuk Egor, Mechtcherine Viktor (2024-09)
A Method for Measuring the Bond Strength Between Impregnated Carbon-Yarn and 3D Printed Strain-Hardening Cementitious Composites
- Ma Xin-Rui, Wang Xian-Lin, Chen Shi-Zi (2024-09)
Trustworthy Machine Learning-Enhanced 3D Concrete Printing:
Predicting Bond Strength and Designing Reinforcement Embedment Length
- Soave Francesco, Muciaccia Giovanni, Ferrara Liberato (2024-09)
Experimental Setup for Shear and Inter-Layer Bonding in a 3D Printed Concrete Framework
- Versteege Jelle, Wolfs Robert, Salet Theo (2024-09)
A Data-Driven View on Digital Fabrication with Concrete:
The Case of Inter-Layer Bond Strength
- Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-09)
Enhancing Inter-Layer Bond Strength and Flexural Performance in 3D Concrete Printing with SHCC Bonding Agents
- Srinivas Dodda, Panda Biranchi, Sitharam Thallak (2024-09)
Comparative Study into the Inter-Layer Bond Strength of 3D Printed Mortar:
Underwater vs. Air Environments
- Freund Niklas, David Martin, Dröder Klaus, Lowke Dirk (2024-09)
Vibrated Short Rebar Insertion:
The Effect of Integration Time on the Resulting Bond Quality
- Qiu Minghong, Sun Yan, Qian Ye (2024-09)
Impact of Groove-and-Tongue Parameters on the Bonding Behavior Between 3D Printed UHP-SHCC and Cast Normal Concrete
- Yu Qian, Zuo Qinxin, Zhang Yamei, Pan Jinlong (2024-08)
An Investigation on Enhancing the Bonding Properties of 3D Printed Concrete Permanent Formwork and Post-Casted Concrete
- Lee Yoon, Lee Sang, Kim Jae, Jeong Hoseong et al. (2024-07)
Inter-Layer Bond Strength of 3D Printed Concrete Members with Ultra-High-Performance Concrete Mix
- Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete
- To Quoc, Pham Koa, Lee Gayoon, Shin Myoungsu et al. (2024-06)
Experimental and FEM Evaluation of the Influence of Inter-Layer Bonding Strength in 3D Printed Concrete Members Under Compressive and Flexural Loadings
- Dong Liang, Yang Yekai, Liu Zhongxian, Zhang Yan et al. (2024-06)
Interface Bonding Characteristics of 3D Printed Ultra-High-Performance Concrete After Elevated Temperatures
- Yan Yufei, Zhang Mo, Ma Guowei, Sanjayan Jay (2024-05)
Enhancing Inter-Layer Bonding Strength of 3D Printed Ternary Geopolymer Using Calcium-Carbonate-Whiskers Spray
- Gu Yucun, Zheng Shuyi, Ma Hongyan, Long Wujian et al. (2024-05)
Effect of Absorption Kinetics of Superabsorbent Polymers on Printability and Inter-Layer Bond of 3D Printing Concrete
- Salaimanimagudam M., Jayaprakash Jaganathan (2024-04)
Effect of Introducing Dummy Layers on Inter-Layer Bonding and Geometrical Deformations in Concrete 3D Printing
- Liu Xinhao, Hu Jiajun, Guo Xiaolu (2024-03)
Printability and Inter-Layer Bonding Property of 3D Printed Fiber-Reinforced Geopolymer
- Wu Dinglue, Luo Qiling, Long Wujian, Zhang Shunxian et al. (2024-02)
Advancing Construction 3D Printing with Predictive Inter-Layer Bonding Strength:
A Stacking Model Paradigm
- Ramesh Akilesh, Rajeev Pathmanathan, Sanjayan Jay (2024-02)
Bond-Slip Behavior of Textile-Reinforcement in 3D Printed Concrete
- Tao Yaxin, Zhang Yi, Schutter Geert, Tittelboom Kim (2024-01)
Interfacial Bonding of 3D Printable Concrete with Chemically Reactive Coating for Automatic Repair
- Xiao Jianzhuang, Bai Meiyan, Wu Yuching, Duan Zhenhua et al. (2024-01)
Inter-Layer Bonding Strength and Pore Characteristics of 3D Printed Engineered Cementitious Composites
- Qiu Minghong, Sun Yan, Qian Ye (2023-12)
Interfacial Bonding Performance of 3D Printed Ultra-High-Performance Strain-Hardening Cementitious Composites and Cast Normal Concrete
- Wang Xianlin, Banthia Nemkumar, Yoo Doo-Yeol (2023-11)
Reinforcement Bond Performance in 3D Concrete Printing:
Explainable Ensemble Learning Augmented by Deep Generative Adversarial Networks
- Liu Huawei, Liu Chao, Zhang Yamei, Bai Guoliang (2023-11)
Bonding Properties Between 3D Printed Coarse Aggregate Concrete and Rebar Based on Interface Structural Characteristics
- Liu Qiong, Cheng Shengbo, Sun Chang, Chen Kailun et al. (2023-11)
Steel-Cable Bonding in Fresh Mortar and 3D Printed Beam Flexural Behavior
- Şahin Hatice, Mardani Ali (2023-10)
How Does Rheological Behavior Affect the Inter-Layer Bonding Strength of 3DPC Mixtures?
- Khademi Pooria, Toufigh Vahab (2023-09)
Data-Driven-Based Ultrasonics-Analysis for Evaluating the Bond-Strength of Concrete-Layers
- Jewett Jackson, Carstensen Josephine (2023-09)
Topology-Optimization for Material-Extrusion-Based Additive Manufacturing-Processes with Weak Bead Bonding
- Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
Effect of Operational- and Material-Oriented Parameters
- Salaimanimagudam M., Jayaprakash Jaganathan (2023-06)
Effect of Printing Parameters on Inter-Filament Voids, Bonding, and Geometrical Deviation in Concrete 3D Printed Structures
- Munemo Rue, Kruger Jacques, Zijl Gideon (2023-06)
Improving Inter-Layer Bond in 3D Printed Concrete Through Induced Thermo-Hydrokinetics
- Soares Augusto, Rodrigues Ana, Costa Hugo, Carmo Ricardo et al. (2023-06)
Bond Between Layers of Cementitious Mortars Developed for 3D Printing
- Chen Yidong, Zhang Yu, Liu Zhiyong, Zhang Yunsheng et al. (2023-04)
3D Printed Concrete Permanent Formwork:
Effect of Post-Cast Concrete Proportion on Interface Bonding
- Yang Liming, Sepasgozar Samad, Shirowzhan Sara, Kashani Alireza et al. (2022-12)
Nozzle Criteria for Enhancing Extrudability, Buildability and Inter-Layer Bonding in 3D Printing Concrete
- Lv Chun, Shen Hongtao, Liu Jie, Wu Dan et al. (2022-11)
Properties of 3D Printing Fiber-Reinforced Geopolymers Based on Inter-Layer Bonding and Anisotropy
- Demiral Nazim, Ozkan Ekinci Mehmet, Şahin Oğuzhan, İlcan Hüseyin et al. (2022-10)
Mechanical Anisotropy Evaluation and Bonding Properties of 3D Printable Construction and Demolition Waste-Based Geopolymer Mortars
- Hass Lauri, Bos Freek, Salet Theo (2022-09)
Characterizing the Bond Properties of Automatically Placed Helical Reinforcement in 3D Printed Concrete
- Cicione Antonio, Kruger Jacques, Mostert Jean-Pierre, Walls Richard et al. (2022-09)
The Effect of Wind on 3D Printed Concrete Inter-Layer Bond Strength Based on Machine Learning Algorithms
- Wang Zhibin, Jia Lutao, Deng Zhicong, Zhang Chao et al. (2022-08)
Bond Behavior Between Steel-Bars and 3D Printed Concrete:
Effect of Concrete Rheological Property, Steel-Bar Diameter and Paste-Coating
- Farahbakhsh Mehdi, Rybkowski Zofia, Zakira Umme, Kalantar Negar et al. (2022-07)
Impact of Robotic 3D Printing Process Parameters on Inter-Layer Bond Strength
- Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping (2022-07)
How Do the Contact Surface Forces Affect the Inter-Layer Bond Strength of 3D Printed Mortar?
- Gebhard Lukas, Esposito Laura, Menna Costantino, Mata-Falcón Jaime (2022-07)
Inter-Laboratory Study on the Influence of 3D Concrete Printing Set-Ups on the Bond Behavior of Various Reinforcements
- Moelich Gerrit, Rensburg Johannes, Kruger Jacques, Combrinck Riaan (2022-06)
The Environment’s Effect on the Inter-Layer Bond Strength of 3D Printed Concrete
- Bekaert Michiel, Tittelboom Kim, Schutter Geert (2022-06)
Evaluation of the Bond Strength Between 3D Printed and Self-Compacting Concrete
- Mostert Jean-Pierre, Kruger Jacques (2022-06)
Interlocking 3D Printed Concrete Filaments Through Surface Topology Modifications for Improved Tensile Bond Strength
- Neef Tobias, Butler Marko, Mechtcherine Viktor (2022-06)
Integrating Mineral-Bonded Carbon Fibers into 3D Concrete Printing
- Hager Izabela, Maroszek Marcin, Mróz Katarzyna, Kęsek Rafał et al. (2022-06)
Inter-Layer Bond Strength Testing in 3D Printed Mineral Materials for Construction Applications
- Cao Xiangpeng, Yu Shiheng, Zheng Dapeng, Cui Hongzhi (2022-06)
Nail-Planting to Enhance the Interface Bonding Strength in 3D Printed Concrete
- Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
A Review
- Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2022-05)
Bonding Strength of Steel-Rebars Perpendicular to the Hardened 3D Printed Concrete-Layers
- Chen Yu, Chang Ze, He Shan, Çopuroğlu Oğuzhan et al. (2022-04)
Effect of Curing Methods During a Long Time-Gap Between Two Printing Sessions on the Inter-Layer Bonding of 3D Printed Cementitious Materials
- Pan Tinghong, Jiang Yaqing, Ji Xuping (2022-03)
Inter-Layer Bonding Investigation of 3D Printing Cementitious Materials with Fluidity-Retaining Polycarboxylate-Superplasticizer and High-Dispersion Polycarboxylate Superplasticizer
- Wang Li, Yang Yu, Yao Liang, Ma Guowei (2022-02)
Interfacial Bonding Properties of 3D Printed Permanent Formwork with the Post-Casted Concrete
- Ding Tao, Qin Fei, Xiao Jianzhuang, Chen Xiaoming et al. (2022-01)
Experimental Study on the Bond Behavior Between Steel-Bars and 3D Printed Concrete
- Wang Hailong, Shao Jianwen, Zhang Jing, Zou Daoqin et al. (2021-11)
Bond Shear Performances and Constitutive Model of Interfaces Between Vertical and Horizontal Filaments of 3D Printed Concrete
- Yao Hao, Xie Zonglin, Li Zemin, Huang Chuhan et al. (2021-11)
The Relationship Between the Rheological Behavior and Inter-Layer Bonding Properties of 3D Printing Cementitious Materials with the Addition of Attapulgite
- Neef Tobias, Mechtcherine Viktor (2021-11)
Simultaneous Integration of Continuous Mineral-Bonded Carbon Reinforcement Into Additive Manufacturing with Concrete
- Li Zhijian, Ma Guowei, Wang Fang, Wang Li et al. (2021-10)
Expansive Cementitious Materials to Improve Micro-Cable-Reinforcement Bond in 3D Concrete Printing
- Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-09)
Inter-Layer Bond and Porosity of 3D Printed Concrete
- Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2021-09)
Modelling the Inter-Layer Bond Strength of 3D Printed Concrete with Surface Moisture
- Khandelwal Vaatsuly, Bhatia Vibhav, Dogra Vinay, Sharma Shivam et al. (2021-08)
3D Printer Robot for Civil Construction:
A Bond Graph Approach
- Babafemi Adewumi, Kolawole John, Miah Md, Paul Suvash et al. (2021-06)
A Concise Review on Inter-Layer Bond Strength in 3D Concrete Printing
- Wang Li, Liu Yi, Yang Yu, Li Yanfeng et al. (2021-04)
Bonding Performance of 3D Printing Concrete with Self-Locking Interfaces Exposed to Compression-Shear and Compression-Splitting Stresses
- Helsel Michelle, Popovics John, Stynoski Peter, Kreiger Eric (2021-03)
Non-Destructive Testing to Characterize Inter-Layer Bonds of Idealized Concrete Additive Manufacturing Products
- Weng Yiwei, Li Mingyang, Wong Teck, Tan Ming (2021-01)
Synchronized Concrete and Bonding-Agent-Deposition-System for Inter-Layer Bond Strength Enhancement in 3D Concrete Printing
- Pan Tinghong, Jiang Yaqing, He Hui, Wang Yu et al. (2021-01)
Effect of Structural Build-Up on Inter-Layer Bond Strength of 3D Printed Cement Mortars
- Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
Improving Performance of Additive Manufactured Concrete:
A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
- Salman Nazar, Ma Guowei, Ijaz Nauman, Wang Li (2021-01)
Weak Inter-Layer Bonding in Extrusion 3D Concrete Printing:
A Comparative Analysis of Mitigation Techniques
- Cicione Antonio, Mazolwana K., Kruger Jacques, Walls Richard et al. (2020-12)
Effect of Transverse and Longitudinal Confinement on the Inter-Layer Bond in 3D Printed Concrete at Elevated Temperatures:
An Experimental Study
- Sun Xiaoyan, Gao Chao, Wang Hailong (2020-10)
Bond-Performance Between BFRP-Bars and 3D Printed Concrete
- Marchment Taylor, Sanjayan Jay (2020-09)
Bond Properties of Reinforcing Bar Penetrations in 3D Concrete Printing
- Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2020-09)
Effect of Microwave-Heating on Inter-Layer Bonding and Buildability of Geopolymer 3D Concrete Printing
- Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
An Experimental and Numerical Study
- Freund Niklas, Mai (née Dressler) Inka, Lowke Dirk (2020-07)
Studying the Bond Properties of Vertical Integrated Short Reinforcement in the Shotcrete 3D Printing Process
- Verian Kho, Ashcroft Jarron, Carli Matthew, Bright Randall et al. (2020-07)
Improving the Bonding Adhesion of the Cold Joints of Normal and Lightweight 3D Printing Mortars
- Bos Freek, Dezaire Steven, Ahmed Zeeshan, Hoekstra Anne et al. (2020-07)
Bond of Reinforcement-Cable in 3D Printed Concrete
- Hosseini Ehsan, Zakertabrizi Mohammad, Korayem Asghar, Zaker Zafar et al. (2020-06)
Orbital Overlapping Through Induction Bonding Overcomes the Intrinsic Delamination of 3D Printed Cementitious Binders
- Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing
- Assaad Joseph, Hamzeh Farook, Hamad Bilal (2020-05)
Qualitative Assessment of Interfacial Bonding in 3D Printing Concrete Exposed to Frost-Attack
- Baz Bilal, Aouad Georges, Leblond Philippe, Mansouri Omar et al. (2020-05)
Mechanical Assessment of Concrete:
Steel Bonding in 3D Printed Elements
- Wang Li, Tian Zehao, Ma Guowei, Zhang Mo (2020-02)
Inter-Layer Bonding Improvement of 3D Printed Concrete with Polymer-Modified Mortar:
Experiments and Molecular Dynamics Studies
- Ma Guowei, Salman Nazar, Wang Li, Wang Fang (2020-02)
A Novel Additive Mortar Leveraging Internal Curing for Enhancing Inter-Layer Bonding of Cementitious Composite for 3D Printing
- Lee Hojae, Kim Jang-Ho, Moon Jae-Heum, Kim Won-Woo et al. (2019-08)
Correlation Between Pore Characteristics and Tensile Bond Strength of Additive Manufactured Mortar Using X-Ray Computed Tomography
- Sakka Fatima, Assaad Joseph, Hamzeh Farook, Nakhoul Charbel (2019-07)
Thixotropy and Interfacial Bond Strengths of Polymer-Modified Printed Mortars
- Putten Jolien, Schutter Geert, Tittelboom Kim (2019-07)
Surface-Modification as a Technique to Improve Inter-Layer Bonding Strength in 3D Printed Cementitious Materials
- Keita Emmanuel, Bessaies-Bey Hela, Zuo Wenqiang, Belin Patrick et al. (2019-06)
Weak Bond Strength Between Successive Layers in Extrusion-Based Additive Manufacturing:
Measurement and Physical Origin
- Jie G., Jie B., Hongxue J. (2019-05)
Experimental Study on Layer Bonding Property of 3D Printing Building Materials
- Hosseini Ehsan, Zakertabrizi Mohammad, Korayem Asghar, Xu Guanzhong (2019-03)
A Novel Method to Enhance the Inter-Layer Bonding of 3D Printing Concrete:
An Experimental and Computational Investigation
- Marchment Taylor, Sanjayan Jay, Xia Ming (2019-03)
Method of Enhancing Inter-Layer Bond Strength in Construction-Scale 3D Printing with Mortar by Effective Bond Area Amplification
- Panda Biranchi, Mohamed Nisar, Tay Yi, Tan Ming (2018-09)
Bond Strength in 3D Printed Geopolymer Mortar
- Marchment Taylor, Sanjayan Jay (2018-09)
Method of Enhancing Inter-Layer Bond Strength in 3D Concrete Printing
- Tay Yi, Ting Guan, Qian Ye, Panda Biranchi et al. (2018-07)
Time-Gap-Effect on Bond Strength of 3D Printed Concrete
- Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
3D Printed Steel-Reinforcement for Digital Concrete Construction:
Manufacture, Mechanical Properties and Bond Behavior
- Tay Yi, Ting Guan, Panda Biranchi, He Lewei et al. (2018-05)
Bond Strength of 3D Printed Concrete
- Panda Biranchi, Mohamed Nisar, Tay Yi, He Lewei et al. (2018-05)
Effects Of Slag Addition On Bond Strength Of 3D Printed Geopolymer Mortar:
An Experimental Investigation
- Panda Biranchi, Paul Suvash, Mohamed Nisar, Tay Yi et al. (2017-09)
Measurement of Tensile Bond Strength of 3D Printed Geopolymer Mortar