Skip to content

#experiment

Keywords by Co - Occurrence

  1. Bharti Mrityunjay, Menon Arun, Santhanam Manu (2026-01)
    Experimental Study of Hardened Properties of 3D-Printed Concrete Under Compression, Tension and Shear Considering Interlayer Influence
  2. Jesus Manuel, Lopes Joana, Teixeira João, Guimarães Ana et al. (2026-01)
    Application of Self-Cleaning Products on 3D-Printed Building Elements:
    An Experimental Study
  3. Zhang Xiaoyue, Chen Zhengren, Zhou Xinting, Li Zheng et al. (2026-01)
    Experimental Investigation on the Mechanical Performance of 3D-Printed Concrete-Glued Laminated Timber Composite Beams
  4. Mohammed Salhah, Aljewifi Hana, Jldain Hafeth (2025-12)
    Evaluating Compressive Strength in 3D-Printed Concrete Structures:
    A Comparative Study of ANSYS Simulations and Experimental Data
  5. Liang Xiangzhou, Li Jinqian, Li Ziwei, Wang Qiang (2025-12)
    Experimental and Analytical Investigation of the Shear Behavior of the Developed BFRP Reinforced 3D Printed Composite Beams with U-Shaped Seawater Sea-Sand ECC Formwork
  6. Ding Tao, Wei Jun, Sun Jingting, Feng Kaikai (2025-12)
    Experimental Study on Thermal Properties of 3D Printed Concrete with Recycled Sand and Powder
  7. Hurtig Karel, Čítek David, Holý Milan, Koteš Peter et al. (2025-12)
    Experimental Assessment of Durability in 3D Printed Cementitious Materials
  8. Shaik Khaja, Perumalla Mallikarjun, Boilla Charan (2025-12)
    Topology Optimization with Experimental-Numerical Investigation of 3D-Printed Concrete Elements
  9. Wang Jinjin, Li Shouzhen, Qiu Jin, Chen Cheng et al. (2025-12)
    Experimental Investigation on Thermal Performance of 3D Printed Concrete Elements Subjected to Radiant Heating
  10. Sunny Akash, Jayaprakash Jaganathan (2025-12)
    Unveiling the Printing Success of Concrete 3D Printed Models:
    A Simulation Study with Voxel Print and Abaqus Using Design of Experiments
  11. Telichko Victor, Slavcheva Galina, Levchenko Artem (2025-12)
    Experimentally Verified FE Model of Bending Reinforced 3D-Printed Concrete Elements
  12. Kalmykov Oleg, Reznik Petro, Furman Inna, Demianenko Ivan (2025-11)
    Experimental Testing of a Complex-Geometry Floor Slab Manufactured Using 3DCP Technology
  13. Wang Zherui, Teitelbaum E., Akbarzadeh Masoud, Aviv D. (2025-11)
    Experimental Assessment on Thermal Mass Performance of Structurally Optimized, 3D-Printed Concrete Floor Element for Carbon Emission Reduction
  14. Korol Ewelina, Jenta Arkadiusz, Chaudhari Ojas, Wójcik Michal (2025-11)
    Experimental Investigation of Concrete Beams Under Bending, Manufactured with 3D Additive Printing Technology
  15. Biswas Rajib, Saito Takahiro, Ito Atsushi (2025-11)
    Experimental Evaluation of a Novel 3D-Printed Permanent Concrete Formwork
  16. Baah Thomas, Kim Heejeong, Latypov Marat (2025-11)
    Multi-Objective Adaptive Experimental Approach for Optimizing 3D Concrete Printing Mixtures and Parameters Incorporating Construction and Demolition Waste for Sustainable Construction
  17. Khalid Lawand, Mermerdaş Kasım, Ekmen Şevin, Khidhir Bzeni Dillshad (2025-11)
    Optimization of Fresh and Hardened Properties of Fiber-Reinforced 3D Printed Geopolymer Composites Using Response Surface Methodology:
    A Data-Driven Approach Based on Prior Experimental Studies
  18. Yavartanoo Fahimeh, Bolhassani Damon, Akbarzadeh Masoud, Ororbia Maximilian et al. (2025-10)
    Advanced Finite Element Modeling of 3D-Printed Post-Tensioned Concrete Beams with Experimental Validation
  19. Jamifar Vahid, Eskandari‐Naddaf Hamid, Dehestani Mehdi (2025-10)
    Optimizing Electric Arc Furnace Dust Utilization in 3D Printed Reinforced Cement Paste Using D‐Optimal Design of Experiments and Gray Wolf Optimization
  20. Cheng Zhangqi, Zhou Lu, Jia Xiangxi, Liu Renlong (2025-10)
    Experimental Study on Crack Development and Fracture Performance of 3D Printed Green Engineered Cementitious Composites
  21. Giulivo Marco, Capozzi Vittorio, Menna Costantino (2025-10)
    Experimental and Analytical Assessment of the in-Plane Behaviour of 3D Printed Concrete Walls Subjected to Cyclic Loads
  22. Ma Wei, Chen Junjie, Dai Yuntong, Zhou Yaya et al. (2025-10)
    Mechanical Properties of 3D Printed Concrete Irregular Structural Formwork:
    Experimental Study and Finite Element Analysis
  23. Kim Tae, Oh Sangwoo, Lee Jinsuk, Choi Seongcheol et al. (2025-10)
    Experimental Data-Driven Framework for Quality Control of 3D-Printed Concrete Permanent Formworks
  24. Mahdy Deena, Sameh Hazem, Fekry Mayar (2025-09)
    Structural Stability of 3D-Printed Earthen Catenary Domes:
    Experimental and Analytical Insights
  25. Lee Chang-Hwan, Gwak Kwan-Woong (2025-09)
    Experimental Validation of a Cable Driven Parallel Robot for 3D Printing Building Construction
  26. Matos Ana, Emiroğlu Mehmet, Milheiro-Oliveira Paula (2025-09)
    Predicting Stabilized Soil Mixture Proportions for 3D Printing:
    Preliminary Study Using the Design of Experiments Approach
  27. Tarhan İsmail, Tarhan Yeşim (2025-09)
    Nonlinear In-Plane Response of 3D-Printed Concrete Walls with Varied Infill Patterns:
    Experimental Mix Design and Numerical Structural Assessment
  28. Ding Tao, Zhu Ruitao, Huang Zhangshuo (2025-09)
    Experimental Study on the Steel Fiber Orientational Distribution of Extrusion-Based 3D-Printed Ultra High-Performance Concrete
  29. Sikora Paweł, Skibicki Szymon, Bielawski Jakub, Techman Mateusz et al. (2025-09)
    Elevated Temperature Response and Fire Resistance Considerations of 3D-Printed Concrete:
    Small- to Medium-Scale Wall Experiments
  30. Disu Oluwatimilehin, Ismail Sikiru, Wood Luke, Chrysanthou Andreas et al. (2025-08)
    Experimental Study on Buildability of 3D-Printed Cement-Based Structures Using Aluminium Sulphate
  31. Miri Zahra, Aurilio R., Polak Maria, Baaj Hassan (2025-08)
    Interface Bonding in 3D-Printed Concrete:
    Experimental Evaluation and Numerical Modeling
  32. Yerikania Utami, Du Hongjian, Poh Leong (2025-07)
    A Comprehensive Experimental Investigation of Anisotropy Behavior on Highly Carbon-Minimized 3D Printed Concrete
  33. Saelens Lien, Tittelboom Kim, Wan-Wendner Roman, Caspeele Robby (2025-07)
    Experimental and Numerical Quantification of the Structural Capacity of Hybrid 3D Printed and Cast Concrete Beams After Topology Optimization
  34. Pessoa Ana Sofia, Lucas Sandra, Simões Nuno, Guimarães Ana (2025-07)
    Heat Transfer in a 3D-Printed Multilayer Wall System:
    An Experimental and Numerical Analysis
  35. Liu Nana, Wang Jie (2025-07)
    Experimental Study on the Effect of Water-Binder Ratio on 3D Printing Form of Concrete Mortar
  36. Zuo Zibo, Huang Yulin, Corte Wouter (2025-06)
    Real-Time Monitoring of Printed Concrete Weight During 3D Concrete Printing to Inversely Assess Process Stability:
    Indicators and Experiments
  37. Robens-Radermacher Annika, Kujath Cezary, Bos Freek, Mechtcherine Viktor et al. (2025-06)
    Design and Implementation of a Database System for Querying, Sharing, and Analyzing Experimental Data:
    Mechanical Properties of 3D Printed Concrete
  38. Hanifa Mohamad, Mendonça Paulo, Figueiredo Bruno, Mahdy Deena (2025-06)
    Experimental Study on the Thermal Performance of 3D-Printed Earthen Wall Segment with Optimized Infill Pattern
  39. Rajeev Pathmanathan, Nissanka Nilusha, Sanjayan Jay (2025-06)
    Experimental Study on Time-Dependent Pumping Behaviour of 3D Concrete Printing
  40. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2025-06)
    Experimental Analysis of the Structural Behavior of Hybrid Concrete 3D Printed-Cast Beam Systems
  41. Pham Thi, Nguyen Thi, Huang Jie (2025-06)
    Experimental Study on Anisotropic Mechanical Properties of 3D Reinforced Concrete with Discrete Polyethylene Fibers
  42. Kim Tae, Oh Sangwoo, Lee Jinsuk, Dong Won-Jun et al. (2025-05)
    Effects of 3D-Printed Concrete Permanent Formwork on the Flexural Behavior of Reinforced Concrete Beams:
    Experimental and Analytical Investigations
  43. Song Xinlei, Xu Quanbiao, Wang Hailong, Sun Xiaoyan et al. (2025-05)
    Flowability-Dependent Anisotropic Mechanical Properties of 3D Printing Concrete:
    Experimental and Theoretical Study
  44. Čítek David, Melter Oto, Hvizdal Ales, Auska Zuzana et al. (2025-05)
    Experimental 3D Printed Concrete Footbridge
  45. Liang Yingming, He Jincheng, Niu Like, Chen Junwei et al. (2025-05)
    Experimental Study on Printability of Solid Waste Concrete Based on 3D Printing Technology
  46. Chandra Jimmy, Halim Alvin, Budiman Franky, Pudjisuryadi Pamuda et al. (2025-05)
    Experimental Study of Bond Strength of Embedded Steel Reinforcement in Vibration-Based 3D Printed Concrete Mortar
  47. An Dong, Rahman Mahfuzur, Zhang Y., Yang Chunhui (2025-05)
    Effects of Key 3D Concrete Printing Process Parameters on Layer Shape:
    Experimental Study and Smooth Particle Hydrodynamics Modelling
  48. Cao Xiangpeng, Cui Hongzhi (2025-04)
    Simple Floor Nail Placement Technique to Reinforce 3D-Printed Concrete:
    An Experimental Investigation
  49. Sørensen Jesper, Stang Henrik (2025-04)
    Experimental Investigation of the Fatigue Behavior of 3D Printed Steel Fiber Reinforced Concrete
  50. Yassin Ahmed, Hafez Mohamed, Aboelhassan Mohamed (2025-04)
    Experimental and Numerical Investigation on the Effect of Different Types of Synthetic Fibers on the Flexure Behavior and Mechanical Properties of 3D Cementitious Composite Printing Provided with Cement CEM II/A-P
  51. Liu Chao, Liang Zhan, Liu Huawei, Wu Yiwen et al. (2025-03)
    Seismic Performance of 3D Printed Reinforced Concrete Walls:
    Experimental Study and Numerical Simulation
  52. Khanverdi Mohsen, Das Sreekanta (2025-03)
    Testing Prisms as a Method for Assessing Compressive Properties of 3D-Printed Structural Members:
    Experimental and Numerical Studies
  53. Zafar Muhammad, Shahid Adnan, Sedghi Reza, Hojati Maryam (2025-03)
    Optimization of Biopolymer Additives for 3D Printable Cementitious Systems:
    A Design of Experiment Approach
  54. Chen Meng, Cheng Jianhua, Zhang Tong, Wang Yuting (2025-03)
    Experimental Characterization and Constitutive Modelling of the Anisotropic Dynamic Compressive Behavior of 3D Printed Engineered Cementitious Composites
  55. Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-03)
    Experimental Study on Rheological Properties and 3D Printing of Simulated Lunar Soil Polymers
  56. Khanverdi Mohsen, Das Sreekanta (2025-03)
    Experimental Study on Water Penetration and Thermal Resistance of Large-Scale 3D-Printed Cementitious Walls
  57. Nasr Ahmed, Duan Zhenhua, Singh Amardeep, Deng Qi et al. (2025-02)
    Fresh Properties and Rheological Behavior of 3D-Printed Cementitious Composites Incorporating Recycled PVC and Nylon Fibers:
    An Experimental Approach
  58. Duan Zhenhua, Tao Jie-Lin, Lin Can, Jiao Dengwu et al. (2025-02)
    3D Printing-Driven Dynamic Migration of Lightweight Microspheres in the Printable Mortars:
    Experiment and Modelling
  59. An Xuehui, Liang Qimin, Li Pengfei, You Wei et al. (2025-02)
    Experimental Assessment on Printing Performance and Mechanical Properties of Underwater Self-Protecting 3D Printing Concrete
  60. Pepe Marco, Lombardi Rosario, Lima Carmine, Paolillo Bruno et al. (2025-01)
    Experimental Evidence on the Possible Use of Fine Concrete and Brick Recycled Aggregates for 3D Printed Cement-Based Mixtures
  61. Wang Hailong, Shen Wenbin, Sun Xiaoyan, Song Xinlei et al. (2025-01)
    Influences of Particle-Size on the Performance of 3D Printed Coarse Aggregate Concrete:
    Experiment, Microstructure, and Mechanism Analysis
  62. Shazad Qamar, Li Fangyuan (2025-01)
    Interfacial Bond-Effects on Shear-Strength and Damage in 3D Printed Concrete Structures:
    A Combined Experimental and Numerical Study
  63. Lori Ali, Mehrali Mehdi (2025-01)
    Filament-Geometry-Control of Printable Geopolymer Using Experimental and Data-Driven Approaches
  64. Vysochinskiy Dmitry, Madsen Gunnar, Lande Ingrid (2025-01)
    An Experimental Study of Consistency and Strength Variation of 3D Printed Concrete Mixes
  65. Mousavi Moein, Bengar Habib, Mousavi Fateme, Mahdavinia Pooneh et al. (2024-12)
    Inter-Layer Bond Strength Prediction of 3D Printable Concrete Using Artificial Neural Network:
    Experimental and Modeling Study
  66. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-12)
    Influence of the Nozzle Geometry on Mechanical Properties of 3D Printed Concrete:
    Experiment and Finite Element Study
  67. Dey Dhrutiman, Kumar Gaurav, Prasad Ventrapragada, Panda Biranchi (2024-12)
    Experimental Investigation of Thermal Performance of 3D Printed Slab Infused with Lightweight Concrete as Insulation
  68. Glotz Theresa, Rasehorn Inken, Petryna Yuri (2024-12)
    Mechanical Behavior of Hardened Printed Concrete and the Effect of Cold Joints:
    An Experimental Investigation
  69. Cao Xiangpeng, Wu Shuoli, Cui Hongzhi (2024-12)
    Experimental Study on In-Situ Mesh Fabrication for Reinforcing 3D Printed Concrete
  70. Zuo Zibo, Tao Yaxin, Corte Wouter (2024-12)
    Experimental Research of Concrete Temperature-Distribution During Large-Scale On-Site 3D Printing Based on Infrared-Thermal-Imaging
  71. Qian Sen, Li Changqi, Zhao Zeyap, Zi Bin (2024-11)
    Modeling and Experimental Validation of a Cable-Driven Robot for Three-Dimensional Printing Construction
  72. Ji Yianliang, Pott Ursula, Mezhov Alexander, Rößler Christiane et al. (2024-11)
    Modelling and Experimental Study on Static Yield-Stress-Evolution and Structural Build-Up of Cement-Paste in Early-Stage of Cement Hydration
  73. Jørgensen Henrik, Hansen Steen, Jespersen Esra, Florenzano Daniele et al. (2024-11)
    Experimental Investigation of Key Structural Parameters for Structural Design of 3D Printed Concrete
  74. Vaishali Panneer, Varunkumar P. (2024-11)
    Experimental Study on Behavior of Cement Concrete in 3d Printing
  75. Menna Costantino (2024-11)
    Seismic Performance of Large-Scale 3D Printed Concrete Panels:
    An Experimental and Analytical Study
  76. Wu Xikai, Shi Qingxuan, Huo Jian, Zhao Yu et al. (2024-11)
    Experimental Study on Buildability and Mechanical Properties of 3D Printing Cob
  77. Sreenivas Gagan, Rizzieri Giacomo, Bhattacherjee Shantanu, Jain Smrati et al. (2024-11)
    Experimental and Numerical Assessment of Layer Deformation in a 3D Printed Concrete Element
  78. Mandala Venugopal, Khan Mohd (2024-11)
    Experimental Investigations on Layered Functionally Graded Fiber-Reinforced Concrete
  79. Peng Chengming, Yang Zhenjun, Li Hui (2024-10)
    A Predictive Model for Interlayer-Water-Evolution and Experimental Validation of 3D Printed Cementitious Materials
  80. Aminpour Nima, Memari Ali (2024-10)
    Numerical and Experimental Study on Reinforced 3DCP Walls Filled with Lightweight Concrete
  81. Wang Qiang, Yang Wenwei, Wang Li, Zhang Dan et al. (2024-09)
    Flexural Performance of the Integrated Steel-Truss-Reinforced 3D Printed Concrete Beams:
    Experimental and Numerical Analysis
  82. Edmund Dineth, Zahra Tatheer, Asad Mohammad, Thamboo Julian (2024-09)
    Experimental Investigation on Tensile-Characteristics of 3D Printed Auxetic-Embedded Cementitious Composites and Shear-Bonding Behavior to Masonry
  83. Andreou Vasilis, Kontovourkis Odysseas (2024-09)
    Formwork-Optimization for Complex 3D Concrete Printing:
    A Unified Theoretical, Digital, and Experimental Framework
  84. Tanaka Shunsei, Usui Tatsuya, Koga Yoshitaka, Miyamoto Shingo et al. (2024-09)
    Experimental Study of Tunnel Invert Construction Using 3D Concrete Printing
  85. Giulivo Marco, Menna Costantino, Capozzi Vittorio, Asprone Domenico (2024-09)
    Experimental Behavior of a 3D Printed Concrete Wall with Fixed Base Anchorage Subjected to In-Plane Cyclic Loads
  86. Soave Francesco, Muciaccia Giovanni, Ferrara Liberato (2024-09)
    Experimental Setup for Shear and Inter-Layer Bonding in a 3D Printed Concrete Framework
  87. Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph, Hüsken Götz (2024-09)
    Correlation of Continuously Measured In-Line Process Parameters and Extruded Geometry in 3D Concrete Printing Experiments
  88. Mezhov Alexander, Robens-Radermacher Annika, Unger Jörg, Schmidt Wolfram (2024-09)
    Effect of the Ambient Temperature on the Structural Build-Up of 3D Printed Concrete:
    Experimental and Modelling Study
  89. Anjos Marcos, Maia José, Souza Dias Leonardo, Medeiros Fernanda et al. (2024-09)
    Effect of the Geometry of Representative Volumetric Masonry Elements:
    Experimental and Numerical Analysis
  90. Schneider Philip, Dietrich Sebastian, Richter Christiane, Asl Reza et al. (2024-09)
    Fabrication-Aware Design Method and Experimental Assessment of a Segmented Concrete Pedestrian Bridge Using SPI Technology.
  91. Ororbia Maximilian, Chai Hua, Zhi Yefan, Vakhshouri Pouria et al. (2024-08)
    Experimental Study of a Funicular Concrete Beam Prototype
  92. Prathipati S., Vardhan J., Murali D., Nithin C. et al. (2024-08)
    An Experimental Study on the Effect of a Viscosity-Modifying-Agent on the Rheological and Strength Behavior of 3D Printed Concrete
  93. Glotz Theresa, Petryna Yuri (2024-08)
    Experimental Characterization of Anisotropic Mechanical Behavior and Failure-Mechanisms of Hardened Printed Concrete
  94. Shahzad Qamar, Akbar Muhammad, Alzara Majed, Yosri Ahmed et al. (2024-07)
    Time-Dependent Buildability Evaluation of 3D Printed Concrete:
    Experimental Validation and Numerical Simulation
  95. Sahai Rajan, Bisht Ravindra, Singh Siddharth, Panigrahi Soraj (2024-07)
    Design-Analysis and Development of a Gantry Robot for Multi-Layer 3D Concrete Printing with Simulation and Experimental Validation
  96. Mitrović Stefan, Vidović Milica, Ignjatović Ivan, Dragaš Jelena (2024-07)
    Experimental Testing of 3D Printed Concrete Truss-Girder
  97. Gerong Wangdui, Wang Pengfei, Liao Minmao, Chen Zhaohui et al. (2024-07)
    Interfacial Cracking at Layer and Filament Interfaces of 3D Printed Concrete:
    Experimental and Numerical Studies
  98. Trento Daniel, Faleschini Flora, Masoomi Maryam, Pellegrino Carlo et al. (2024-07)
    Additive Manufacturing for Earth-Based Materials:
    An Experimental Investigation
  99. Wang Jinjin, Chen Cheng, Chu Tianwei, Jiang Liming et al. (2024-07)
    Experimental Study and OpenSees Modelling for Thermal Response of 3D Printed Concrete Exposed to Fires
  100. Sariyev Bakytzhan, Konysbekov Alisher, Jexembayeva Assel, Konkanov Marat (2024-07)
    A Comparative Study of the Rheological Properties of a Fly-Ash-Based Geopolymer Reinforced with PP-Fiber for 3D Printing:
    An Experimental and Numerical Approach
  101. To Quoc, Pham Koa, Lee Gayoon, Shin Myoungsu et al. (2024-06)
    Experimental and FEM Evaluation of the Influence of Inter-Layer Bonding Strength in 3D Printed Concrete Members Under Compressive and Flexural Loadings
  102. Mathew Ashitta, Philip Nivin, Jędrzejewska Agnieszka (2024-05)
    Enhancing Sustainability and Performance of 3D Printing Mortar with Alccofine 1203, GGBS, and Kaolin:
    Experimental Investigation and Mechanical Characterization
  103. Bai Meiyan, Xiao Jianzhuang, Wu Yuching, Ding Tao (2024-05)
    Experimental and Numerical Study on the Flexural Behavior of 3D Printed Composite Beams with U-Shaped ECC Formwork
  104. Liu Zhenbang, Li Mingyang, Wong Teck, Tan Ming (2024-05)
    Determine the Effects of Pore Properties on the Mechanical Performances of 3D Concrete Printing Units with Experimental and Numerical Methods
  105. Deetman Arjen, Bos Derk, Blaakmeer Jan, Salet Theo et al. (2024-05)
    An In-Line Dye Tracer Experiment to Measure the Residence Time in Continuous Concrete Processing
  106. Zhou Boyu, Zhang Mo, Ma Guowei (2024-05)
    An Experimental Study on 3D Printed Concrete Reinforced with Fibers Recycled from Wind Turbine Blades
  107. Chen Meng, Fang Shuai, Wang Guangquan, Xuan Yiwei et al. (2024-03)
    Compressive and Flexural Behavior of Engineered Cementitious Composites-Based Auxetic Structures:
    An Experimental and Numerical Study
  108. Khan Shoukat, İlcan Hüseyin, Imram Ramsha, Aminipour Ehsan et al. (2024-01)
    The Impact of Nozzle-Diameter and Printing Speed on Geopolymer-Based 3D Printed Concrete Structures:
    Numerical Modeling and Experimental Validation
  109. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-01)
    Experimental and Numerical Evaluation of Multi-Directional Compressive and Flexure Behavior of Three-Dimensional Printed Concrete
  110. Duan Zhenhua, Deng Qi, Xiao Jianzhuang, Lv Zhenyuan et al. (2024-01)
    Experimental Realization on Stress-Distribution Monitoring During 3D Concrete Printing
  111. Wang Li, Wang Fucheng, Li Rong, Wang Qiao (2023-12)
    Interfacial Constitutive Model of 3D Printed Fiber-Reinforced Concrete Composites and Its Experimental Validation
  112. Natanzi Atteyeh, McNally Ciaran (2023-12)
    Experimental Investigation of Low-Carbon 3D Printed Concrete
  113. Imagawa Koichi, Ohno Motohiro, Ishida Tetsuya (2023-11)
    An Experimental Study on Energy-Absorption-Capability of Cast and 3D Printed Architected Cement-Based Materials
  114. Fu Yanan, Zhang Ying, Wu Lei (2023-11)
    Experimental Study on Structural Performance of Cast-in-Place Frame Printed Concrete Wall
  115. Zhu Binrong, Wang Yufei, Sun Junbo, Wei Yang et al. (2023-10)
    An Experimental Study on the Influence of Waste-Rubber-Particles on the Compressive, Flexural and Impact Properties of 3D Printable Sustainable Cementitious Composites
  116. Markin Slava, Cordova Julian, Mechtcherine Viktor (2023-10)
    Evolution of Capillary Pressure in 3D Printed Concrete Elements:
    Numerical Modelling and Experimental Validation
  117. Ye Junhong, Yang Minxin, Yu Jiangtao, Dai Yecheng et al. (2023-10)
    Size-Effect on Flexural and Fracture Behaviors of 3D Printed Engineered Cementitious Composites:
    Experimental and Numerical Studies
  118. Sun Houchao, Li Furong, Shi Feiting (2023-10)
    Experimental Study on Dynamic Mechanical Properties of 3D Printed Cement-Based Materials Under Splitting Tension After High Temperature
  119. Rui Aoyu, Wang Li, Lin Wenyu, Ma Guowei (2023-10)
    Experimental Study on Damage Anisotropy of 3D Printed Concrete Exposed to Sulfate-Attack
  120. Li Mingyang, Zhang Dong, Wong Teck, Tan Ming et al. (2023-09)
    Modeling and Experimental Investigation of Fiber Orientation in Cast and 3D Printed Cementitious Composites
  121. Li Mingyang, Liu Zhixin, Ho Jin, Wong Teck (2023-08)
    Experimental Investigation of Fresh and Time-Dependent Rheological Properties of 3D Printed Cementitious Material
  122. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi (2023-08)
    Experimental Study of the In-Situ Rebar-Splicing-Technique to Reinforce 3D Printed Concrete in Vertical Directions
  123. Pessoa Ana Sofia, Jesus Manuel, Guimarães Ana, Lucas Sandra et al. (2023-07)
    Experimental Characterisation of Hygrothermal Properties of a 3D Printed Cementitious Mortar
  124. Yemesegen Eden, Memari Ali (2023-07)
    A Review of Experimental Studies on Cob, Hempcrete, and Bamboo Components and the Call for Transition Towards Sustainable Home Building with 3D Printing
  125. Baldoceda Jordan, Silva Guido, Kim Suyeon, Ruiz Gaby et al. (2023-07)
    Preliminary Experimental Evaluation of Buildability Improvement Methods for Concrete for 3D Printing
  126. Mollah Md., Comminal Raphaël, Silva Wilson, Šeta Berin et al. (2023-07)
    Computational Fluid Dynamics Modelling and Experimental Analysis of Reinforcement-Bar-Integration in 3D Concrete Printing
  127. Khan Shoukat, İlcan Hüseyin, Aminipour Ehsan, Şahin Oğuzhan et al. (2023-07)
    Buildability-Analysis on Effect of Structural Design in 3D Concrete Printing:
    An Experimental and Numerical Study
  128. Schönsee Eric, Hüsken Götz, Jeyifous Olubunmi, Mezhov Alexander et al. (2023-06)
    Calculating Rheological Properties of Fresh Mortar for Additive Manufacturing Based on Experimental, Multi-Sensor Data
  129. Pressmair Nadine, Kromoser Benjamin (2023-06)
    Development-Stages of Structurally Optimized Concrete Girders:
    Design-Concepts, Material-Strategies and Experimental Investigation
  130. Saelens Lien, Wan-Wendner Roman, Caspeele Robby, Tittelboom Kim (2023-06)
    Experimental Study on the Directional Dependency of 3D Printed Concrete in the Elastic Range
  131. Hua Tianran, Lin Alexander, Poh Wen, Wong De et al. (2023-06)
    3D Printed Concrete Shear Keys:
    Design and Experimental Study
  132. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Youcef-Toumi Kamal et al. (2023-06)
    Experimental Workflow Implementation for Automatic Detection of Filament-Deviation in 3D Robotic Printing Process
  133. Budiman Franky, Chandra Jimmy, Halim Alvin, Pudjisuryadi Pamuda (2023-04)
    Flexural and Shear Behavior of 3D Printed Reinforced Concrete Beams:
    An Experimental Study
  134. Wang Ziyue, Chen Zixuan, Xiao Jianzhuang, Ding Tao (2023-03)
    Experimental Study on Interfacial Shear Behavior of 3D Printed Recycled Mortar
  135. Khan Shoukat, Koç Muammer (2023-03)
    Buildability-Analysis of 3D Concrete Printing Process:
    A Parametric Study Using Design of Experiment-Approach
  136. Liu Haoran, Xiao Jianzhuang, Ding Tao (2023-03)
    Flexural Performance of 3D Printed Composite Beams with ECC and Recycled Fine Aggregate Concrete:
    Experimental and Numerical Analysis
  137. Cuevas Villalobos Karla, Strzałkowski Jarosław, Kim Ji-Su, Ehm Clemens et al. (2023-02)
    Towards Development of Sustainable Lightweight 3D Printed Wall Building Envelopes:
    Experimental and Numerical Studies
  138. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Das Utpal et al. (2023-02)
    Optimization of Mix Proportion of 3D Printable Mortar Based on Rheological Properties and Material-Strength Using Factorial Design of Experiment
  139. Chang Ze, Liang Minfei, Xu Yading, Wan Zhi et al. (2023-02)
    Early-Age Creep of 3D Printable Mortar:
    Experiments and Analytical Modelling
  140. Christen Heidi, Zijl Gideon, Villiers Wibke (2023-02)
    Improving Building Thermal Comfort Through Passive Design:
    An Experimental Analysis of Phase-Change-Material 3D Printed Concrete
  141. Baghdadi Abtin, Ledderose Lukas, Ameri Shaghayegh, Kloft Harald (2023-02)
    Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of Robotic CNC Manufacturing Technique
  142. Kloft Harald, Schmitz Linus, Müller Christoph, Laghi Vittoria et al. (2023-01)
    Experimental Application of Robotic Wire and Arc Additive Manufacturing-Technique for Strengthening the I-Beam Profiles
  143. Du Wenfeng, Zhu Liming, Zhang Hao, Zhou Zhiyong et al. (2023-01)
    Experimental and Numerical Investigation of an Innovative 3DPC Thin-Shell Structure
  144. Baghdadi Abtin, Heristchian Mahmoud, Ledderose Lukas, Kloft Harald (2023-01)
    Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of the Robotic Subtractive Manufacturing Technique
  145. Li Zihan, Liu Huanbao, Cheng Xiang, Nie Ping et al. (2022-12)
    Improvement of 3D Printing Cement-Based Material-Process:
    Parameter Experiment and Analysis
  146. Cao Xiangpeng, Yu Shiheng, Wu Shuoli, Cui Hongzhi (2022-11)
    Experimental Study of Hybrid Manufacture of Printing and Cast-in-Process to Reinforce 3D Printed Concrete
  147. Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping et al. (2022-11)
    Flow and Deformation Behaviors of Cementitious Materials Through Nozzles with Different Geometric Parameters:
    Experimental and Numerical Approaches
  148. Tanapornraweekit Ganchai, Jiramarootapong Patiphat, Paudel Satish, Tangtermsirikul Somnuk et al. (2022-11)
    Experimental and Numerical Investigation of 3D Printed Mortar Walls Under Uniform Axial Compression
  149. Dey Dhrutiman, Panda Biranchi (2022-10)
    An Experimental Study of Thermal Performance of 3D Printed Concrete Slabs
  150. Liu Junli, Tran Jonathan (2022-09)
    Experimental Study on 3D-Printed Cementitious Materials Containing Surface-Modified Recycled Crumb-Rubber
  151. He Lewei, Li Hua, Chow Wai, Zeng Biqing et al. (2022-09)
    Increasing the Inter-Layer Strength of 3D Printed Concrete with Tooth-Like Interface:
    An Experimental and Theoretical Investigation
  152. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2022-08)
    Rheometry for Concrete 3D Printing:
    A Review and an Experimental Comparison
  153. Čítek David, Rehacek Stanislav, Dobias Daniel (2022-07)
    Experimental Research on 3D Printed Construction from Cement-Based Composites
  154. Singh Amardeep, Chen Zhiyuan, Duan Zhenhua, Li Lei (2022-07)
    Utilization Potential of Steel-Fibers in 3D Printed Functionally Graded Cementitious Composite:
    An Experimental Approach
  155. Galé Benjamin, Ursenbacher Thierry, Petit Agnès, Bourquin Vincent (2022-06)
    Shotcrete 3DCP Projection-Angle and Speed-Optimization:
    Experimental Approaches and Theoretical Modelling
  156. Mezhov Alexander, Robens-Radermacher Annika, Zhang Kun, Kühne Hans-Carsten et al. (2022-06)
    Temperature Impact on the Structural Build-Up of Cementitious Materials:
    Experimental and Modelling Study
  157. Spangenberg Jon, Silva Wilson, Mollah Md., Comminal Raphaël et al. (2022-06)
    Integrating Reinforcement with 3D Concrete Printing:
    Experiments and Numerical Modelling
  158. Pastore Tommaso, Esposito Laura, Menna Costantino, Asprone Domenico (2022-06)
    Overcoming Fabrication-Constraints in Concrete 3D Printing Using Interlacing Bezier-Curves:
    A Numerical and Experimental Analysis
  159. Nemova Darya, Kotov Evgeny, Andreeva Darya, Khorobrov Svyatoslav et al. (2022-06)
    Experimental Study on the Thermal Performance of 3D Printed Enclosing Structures
  160. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-04)
    D-Optimal Design of Experiments Applied to 3D High-Performance Concrete Printing Mix-Design
  161. Pan Tinghong, Teng Huaijin, Liao Hengcheng, Jiang Yaqing et al. (2022-03)
    Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials:
    Experimental and Numerical Studies
  162. Cui Hongzhi, Li Yuanhong, Cao Xiangpeng, Huang Mingyang et al. (2022-03)
    Experimental Study of 3D Concrete Printing-Configurations Based on the Buildability Evaluation
  163. Mai (née Dressler) Inka, Lowke Dirk, Perrot Arnaud (2022-03)
    Fluid-Intrusion in Powder-Beds for Selective Cement-Activation:
    An Experimental and Analytical Study
  164. Carneau Paul, Mesnil Romain, Baverel Olivier, Roussel Nicolas (2022-03)
    Layer Pressing in Concrete Extrusion-Based 3D Printing:
    Experiments and Analysis
  165. Zhou Jiehang, Du Longyu, Lai Jianzhong, Wang Qiang et al. (2022-03)
    Preparation and High-Velocity Impact Experiment for Three-Dimensional-Printed Concrete
  166. Cao Xiangpeng, Yu Shiheng, Cui Hongzhi (2022-02)
    Experimental Investigation on Inner- and Inter-Strip Reinforcements for 3D Printed Concrete via Automatic Staple Inserting Technique
  167. Alqenaee Amnah, Memari Ali (2022-02)
    Experimental Study of 3D Printable Cob Mixtures
  168. Ding Tao, Qin Fei, Xiao Jianzhuang, Chen Xiaoming et al. (2022-01)
    Experimental Study on the Bond Behavior Between Steel-Bars and 3D Printed Concrete
  169. Skibicki Szymon, Techman Mateusz, Federowicz Karol, Olczyk Norbert et al. (2021-12)
    Experimental Study of Hardened Young's Modulus for 3D Printed Mortar
  170. Lauff Philipp, Pugacheva Polina, Rutzen Matthias, Weiss Ursula et al. (2021-11)
    Evaluation of the Behavior of Carbon-Short-Fiber-Reinforced Concrete (CSFRC) Based on a Multi-Sensory Experimental Investigation and a Numerical Multi-Scale Approach
  171. Esposito Laura, Casagrande Lorenzo, Menna Costantino, Asprone Domenico et al. (2021-10)
    Early-Age Creep Behavior of 3D Printable Mortars:
    Experimental Characterisation and Analytical Modelling
  172. Lee Hojae, Seo Eun-A, Kim Won-Woo, Moon Jae-Heum (2021-10)
    Experimental Study on Time-Dependent Changes in Rheological Properties and Flow-Rate of 3D Concrete Printing Materials
  173. Han Xiaoyu, Yan Jiachuan, Liu Mingjian, Huo Liang et al. (2021-10)
    Experimental Study on Large-Scale 3D Printed Concrete Walls Under Axial Compression
  174. Nováková Kateřina, Vele Jiří (2021-09)
    Prvok:
    An Experiment with 3D Printing Large Doublecurved Concrete Structure
  175. Choi Se-Jin, Kim Ji-Hwan, Jeong Hyojin, Lee Ja-Sung et al. (2021-08)
    Simulated and Experimental Investigation of the Mechanical Properties and Solubility of 3D Printed Capsules for Self-Healing Cement Composites
  176. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2021-08)
    Experimental Calibration and Compensation for the Continuous Effect of Time, Number of Layers and Volume of Material on Shape Deformation in Small-Scale Additive Manufacturing of Concrete
  177. Jørgensen Henrik, Douglas Philip, Naboni Roberto (2021-06)
    Experimental Study on the Anisotropic Behavior and Strength of 3D Printed Concrete
  178. Ting Guan, Tay Yi, Tan Ming (2021-04)
    Experimental Measurement on the Effects of Recycled Glass-Cullets as Aggregates for Construction 3D Printing
  179. Sun Jingting, Xiao Jianzhuang, Li Zhengrong, Feng Xiwen (2021-03)
    Experimental Study on the Thermal Performance of a 3D Printed Concrete Prototype Building
  180. Shakor Pshtiwan, Gowripalan Nadarajah, Rasouli Habib (2021-03)
    Experimental and Numerical Analysis of 3D Printed Cement Mortar Specimens Using Inkjet 3DP
  181. Meurer Maximilian, Claßen Martin (2021-02)
    Mechanical Properties of Hardened 3D Printed Concretes and Mortars:
    Development of a Consistent Experimental Characterization-Strategy
  182. Cicione Antonio, Mazolwana K., Kruger Jacques, Walls Richard et al. (2020-12)
    Effect of Transverse and Longitudinal Confinement on the Inter-Layer Bond in 3D Printed Concrete at Elevated Temperatures:
    An Experimental Study
  183. Ashrafi Negar, Nazarian Shadi, Meisel Nicholas, Duarte José (2020-10)
    Experimental Prediction of Material-Deformation in Large-Scale Additive Manufacturing of Concrete
  184. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2020-08)
    Experimental Investigation of Reinforcement-Strategies for Concrete-Extrusion 3D Printed Beams
  185. Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
    Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
    An Experimental and Numerical Study
  186. Fioretti Marta, Kompella Sriram, Monte Francesco, Esposito Laura et al. (2020-07)
    Experimental Investigation on the Early-Age Tensile Strength of Fiber-Reinforced Mortar Used in 3D Concrete Printing
  187. Esposito Laura, Menna Costantino, Asprone Domenico, Rossino Chiara et al. (2020-07)
    An Experimental Testing Procedure to Assess the Buildability Performance of 3D Printed Concrete Elements
  188. Brun Francis, Gaspar Florindo, Mateus Artur, Vitorino João et al. (2020-07)
    Experimental Study on 3D Printing of Concrete with Overhangs
  189. Benamara Abdeslam, Pierre Alexandre, Kaci Abdelhak, Mélinge Yannick (2020-07)
    3D Printing of a Cement-Based Mortar in a Complex Fluid Suspension:
    Analytical Modeling and Experimental Tests
  190. Liu Yan, Jewett Jackson, Carstensen Josephine (2020-07)
    Experimental Investigation of Topology-Optimized Deep Reinforced Concrete Beams with Reduced Concrete Volume
  191. Wang Yu, Li Shuaishuai, Qin Tian, Yu Ying et al. (2020-07)
    Concrete 3D Printing:
    System Development, Process Planning and Experimental Results
  192. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-07)
    Influence of Processing Parameters on the Layer Geometry in 3D Concrete Printing:
    Experiments and Modelling
  193. Cicione Antonio, Kruger Jacques, Walls Richard, Zijl Gideon (2020-05)
    An Experimental Study of the Behavior of 3D Printed Concrete at Elevated Temperatures
  194. Park Keunhyoung, Memari Ali, Hojati Maryam, Zahabi Mehrzad et al. (2020-03)
    Experimental Testing and Finite Element Modeling of 3D Printed Reinforced Concrete Beams
  195. Haustein Martin, Kluwe Moritz, Schwarze Rüdiger (2020-03)
    Experimental Investigation of the Pumping of a Model-Concrete Through Pipes
  196. Wang Li, Tian Zehao, Ma Guowei, Zhang Mo (2020-02)
    Inter-Layer Bonding Improvement of 3D Printed Concrete with Polymer-Modified Mortar:
    Experiments and Molecular Dynamics Studies
  197. Foteinopoulos Panagis, Esnault Vivien, Komineas George, Papacharalampopoulos Alexios et al. (2020-01)
    Cement-Based Additive Manufacturing:
    Experimental Investigation of Process Quality
  198. Lafhaj Zoubeir, Rabenantoandro Andry, Moussaoui Soufiane, Dakhli Zakaria et al. (2019-12)
    Experimental Approach for Printability-Assessment:
    Toward a Practical Decision-Making Framework of Printability for Cementitious Materials
  199. Jie G., Jie B., Hongxue J. (2019-05)
    Experimental Study on Layer Bonding Property of 3D Printing Building Materials
  200. Hosseini Ehsan, Zakertabrizi Mohammad, Korayem Asghar, Xu Guanzhong (2019-03)
    A Novel Method to Enhance the Inter-Layer Bonding of 3D Printing Concrete:
    An Experimental and Computational Investigation
  201. Zuo Zibo, Gong Jian, Huang Yulin, Zhan Yijian et al. (2019-03)
    Experimental Research on Transition from Scale 3D Printing to Full-Size Printing in Construction
  202. Duarte José, Nazarian Shadi, Ashrafi Negar (2018-09)
    Designing Shelters for 3D Printing:
    A Studio Experiment
  203. Falliano Devid, Gugliandolo Ernesto, Domenico Dario, Ricciardi Giuseppe (2018-09)
    Experimental Investigation on the Mechanical Strength and Thermal Conductivity of Extrudable Foamed Concrete and Preliminary Views on Its Potential Application in 3D Printed Multilayer Insulating Panels
  204. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
    Experimental Investigation of Printing Parameters on Material-Distribution in 3D Spray Cementitious Material Printing Process
  205. Panda Biranchi, Mohamed Nisar, Tay Yi, He Lewei et al. (2018-05)
    Effects Of Slag Addition On Bond Strength Of 3D Printed Geopolymer Mortar:
    An Experimental Investigation
  206. Panda Biranchi, Tan Ming (2018-03)
    Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing
  207. Wolfs Robert, Bos Freek, Salet Theo (2018-02)
    Early-Age Mechanical Behaviour of 3D Printed Concrete:
    Numerical Modelling and Experimental Testing
  208. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2018-01)
    Penetration of Cement-Pastes into Sand-Packings During 3D Printing:
    Analytical and Experimental Study
  209. Suiker Akke (2018-01)
    Mechanical Performance of Wall Structures in 3D Printing Processes:
    Theory, Design Tools and Experiments
  210. Bos Freek, Ahmed Zeeshan, Jutinov Evgeniy, Salet Theo (2017-11)
    Experimental Exploration of Metal-Cable as Reinforcement in 3D Printed Concrete
  211. Lao Wenxin, Li Mingyang, Masia Lorenzo, Tan Ming (2017-08)
    Approaching Rectangular Extrudate in 3D Printing for Building and Construction by Experimental Iteration of Nozzle Design
  212. Kontovourkis Odysseas, Tryfonos George (2017-07)
    Integrating Parametric Design with Robotic Additive Manufacturing for 3D Clay Printing:
    An Experimental Study
  213. Kumar Nitish, Hack Norman, Dörfler Kathrin, Walzer Alexander et al. (2017-06)
    Design, Development and Experimental Assessment of a Robotic End-Effector for Non-Standard Concrete Applications
  214. Cheikh Khadija, Rémond Sébastien, Khalil Noura, Aouad Georges (2017-04)
    Numerical and Experimental Studies of Aggregate-Blocking in Mortar-Extrusion
  215. Herrmann Michael, Sobek Werner (2015-10)
    Functionally Graded Concrete:
    Numerical Design Methods and Experimental Studies on Mass Minimized Components