Skip to content

#numeric

Keywords by Co - Occurrence

  1. Tripathi Avinaya, Nair Sooraj, Rajan Subramaniam, Sant Gaurav et al. (2026-04)
    Deformation-Based Buildability Assessment of 3D Printed Concrete and Its Numerical Simulation
  2. Azarhomayun Fazel, Alipanahi Pouya, Zeng Hang, Kim Heejeong et al. (2026-04)
    Experimental and Numerical Investigation of Plastic Shrinkage Control in 3D-Printed Concrete Using Natural Zeolite
  3. Manivannan T., Reddy K., Jaganathan Jayaprakash (2026-04)
    Numerical Analysis of Flexural Behaviour in 3D-Printed Snap-Fit Interlocking Concrete Specimens Incorporating Frictional Interactions
  4. Pessoa Sofia, Lucas Sandra, Simões Nuno, Guimarães Ana (2026-03)
    Drying Process in a 3D-Printed Multilayer Wall System:
    An Experimental and Numerical Analysis
  5. Warsi Syed, Panda Biranchi, Biswas Pankaj, Chandra Borsaikia Arun (2026-03)
    Design of Earthquake-Resistant 3D Printed Concrete Walls:
    An Integrated Experimental-Numerical Framework for Predicting Cyclic Performance of Full-Scale Structural Building Based on Wall Testing
  6. Alzoubi Y., Muciaccia Giovanni, Ferrara Liberato, Cibelli Antonio et al. (2026-03)
    Numerical Modelling of Interlayer Adhesion in 3D-Printed Concrete with LDPM
  7. Prakash Pawan, Tripathi Shubham, Zade Nikhil, Shariff Mohammad (2026-02)
    Experimental and Numerical Investigation of Bond and Flexural Behaviour of Additively Manufactured Structural Concrete Beams
  8. Aabbas Mohamed, Mahdaoui Mustapha, Bouchikhi Abdelhadi, Ahachad Mohammed et al. (2026-01)
    Experimental and Numerical Study of the Incorporation of Spent Coffee Grounds and Phase Change Materials in Hollow Bricks Manufactured by 3D Printing
  9. Pal Biswajit, Chourasia Ajay, Tomar Milan, Pradeep Kumar (2026-01)
    Influence of Interfilament Bond Characteristics on the Load–Deflection Behavior of 3D Printed Beam:
    A Numerical Study
  10. Eisazadeh Hamid, Chatroudi Narges, Alizadeh Roozbeh (2025-12)
    AI-Based Prediction and Numerical Analysis of Mechanical and Microstructural Parameters of Carbon Fiber Reinforced 3D Printed Composites
  11. Fatima Warsi, Syed Bustan, Panda Biranchi, Biswas Pankaj (2025-12)
    Numerical Evaluation of the Seismic Performance of Self-Centering 3D Printed Concrete Wall
  12. Shaik Khaja, Perumalla Mallikarjun, Boilla Charan (2025-12)
    Topology Optimization with Experimental-Numerical Investigation of 3D-Printed Concrete Elements
  13. Cao Jing, Yang Xiaojie, Shi Yaming, Yang Yi et al. (2025-12)
    Numerical Analysis of Mechanical Properties of Steel Fiber Composite Cement Mortar Considering Non-Uniformity in 3D Printing.
  14. Xu Shuhao, Lin Xing-Tao, Chen Xiangsheng (2025-11)
    Numerical Investigation of Anisotropic in 3D Printed Concrete Specimens Considering the Effects of Weak Interfaces and Pore-Induced Defects
  15. Mostert Jean-Pierre, Kruger Jacques (2025-10)
    Numerically Optimised Filament Surface Topology Towards Maximum Bond Strength in 3D Printed Concrete
  16. Bianco Nicola, Fragnito Andrea, Iasiello Marcello, Mauro Gerardo et al. (2025-10)
    Numerical Analysis of a 3D Printed Concrete Envelope Incorporating PCM Nanoparticles
  17. Foulki Rida, Mesoudy Mouad, Cherkaoui Khalid (2025-10)
    Numerical and Theoretical Analysis of Pumping and Extrusion in 3D Concrete Printing
  18. Tanaka Shunsei, Yoshida Kohei, Yamamoto Yujin, Kinomura Koji (2025-10)
    Numerical Evaluation on Buildability of 3D Printing Mortar Based on Time-Dependent Material Model
  19. Reznik Petro, Volodymyrov Anton, Tenesesku Vladyslav, Firsov Pavlo (2025-10)
    Numerical Analysis of 3D-Printed Permanent Formwork in Multi-Story Building Construction
  20. Tarhan İsmail, Tarhan Yeşim (2025-09)
    Nonlinear In-Plane Response of 3D-Printed Concrete Walls with Varied Infill Patterns:
    Experimental Mix Design and Numerical Structural Assessment
  21. Chortis Alexandros, Gkountas Charalampos, Melidis Lazaros, Katakalos Konstantinos (2025-09)
    Seismic Performance Evaluation of 3D-Printed Concrete Walls Through Numerical Methods
  22. Miri Zahra, Aurilio R., Polak Maria, Baaj Hassan (2025-08)
    Interface Bonding in 3D-Printed Concrete:
    Experimental Evaluation and Numerical Modeling
  23. Oulkhir Fatima, Akhrif Iatimad, Jai Mostapha, Rihani Nadir (2025-07)
    Clay and Alginate-Based Mixtures 3D Printing:
    A Numerical Procedure for Shape Stability and Buildability Assessment
  24. Saelens Lien, Tittelboom Kim, Wan-Wendner Roman, Caspeele Robby (2025-07)
    Experimental and Numerical Quantification of the Structural Capacity of Hybrid 3D Printed and Cast Concrete Beams After Topology Optimization
  25. Pessoa Ana Sofia, Lucas Sandra, Simões Nuno, Guimarães Ana (2025-07)
    Heat Transfer in a 3D-Printed Multilayer Wall System:
    An Experimental and Numerical Analysis
  26. Kachalov A., Sánchez P., Mollah Md., Ezquerro J. et al. (2025-07)
    Numerical Analysis of Coaxially 3D Printed Lunar Habitats:
    Integrating Regolith and PCM for Passive Temperature Control
  27. Kumar S., Muthu Nelson, Panda Biranchi (2025-06)
    Numerical Investigation of Structural Behavior of 3D-Printed Concrete Walls:
    Insights from Damage Mechanics and Cohesive Zone Approaches
  28. Warsi Syed, Panda Biranchi, Biswas Pankaj (2025-06)
    Design of Earthquake-Resistant 3D Printed Concrete Wall Based on ACI 318-19:
    Analytical Investigation and Numerical Modelling
  29. Wang Chaofan, Li Bin, Chen Bing (2025-04)
    Enhancing Printability and Mechanical Performance of 3D Printed Magnesium Phosphate Cement Through Silica Fume Modification:
    Rheological, Microstructural, and Numerical Insights
  30. Ayhan Bahar, Irizarry Elmer, Lale Erol, Yu Ke et al. (2025-04)
    Numerical Simulation of 3D Printed Ultra High-Performance Concrete Using the Lattice Discrete Particle Model
  31. Yassin Ahmed, Hafez Mohamed, Aboelhassan Mohamed (2025-04)
    Experimental and Numerical Investigation on the Effect of Different Types of Synthetic Fibers on the Flexure Behavior and Mechanical Properties of 3D Cementitious Composite Printing Provided with Cement CEM II/A-P
  32. Liu Chao, Liang Zhan, Liu Huawei, Wu Yiwen et al. (2025-03)
    Seismic Performance of 3D Printed Reinforced Concrete Walls:
    Experimental Study and Numerical Simulation
  33. Khanverdi Mohsen, Das Sreekanta (2025-03)
    Testing Prisms as a Method for Assessing Compressive Properties of 3D-Printed Structural Members:
    Experimental and Numerical Studies
  34. Suphunsaeng Kantawich, Prasittisopin Lapyote, Pethrung Sirichai, Pansuk Withit (2025-03)
    Fire Performance Evaluation of 3D-Printed Concrete Walls:
    A Combined Full-Scale and Numerical Modeling Approach
  35. Akhrif Iatimad, Oulkhir Fatima, Jai Mostapha, Rihani Nadir et al. (2025-03)
    Earth-Based Materials 3D Printing, Extrudability and Buildability Numerical Investigations
  36. Do Duc, Diab Zeinab, Rémond Sébastien, Hoxha Dashnor (2025-01)
    Numerical Simulation-Tools for 3D Printing
  37. Shazad Qamar, Li Fangyuan (2025-01)
    Interfacial Bond-Effects on Shear-Strength and Damage in 3D Printed Concrete Structures:
    A Combined Experimental and Numerical Study
  38. Wang Hailong, Shen Junyi, Sun Xiaoyan, Dong Weiwei et al. (2024-12)
    Numerical Investigation on Shear Behavior of Reinforced Concrete Beam with 3D Printed Concrete Permanent Formwork
  39. Rymeš Jiří, Červenka Jan, Jendele Libor, Bureš Vladislav et al. (2024-11)
    Integrating 3D Modelling and Non-Linear Numerical Simulations in Concrete Additive Manufacturing
  40. Sreenivas Gagan, Rizzieri Giacomo, Bhattacherjee Shantanu, Jain Smrati et al. (2024-11)
    Experimental and Numerical Assessment of Layer Deformation in a 3D Printed Concrete Element
  41. Lu Yu, Chen Haohua, Tomac Ingrid, McCartney John (2024-10)
    Analytical and Numerical Investigation of Gravity Anchors for Floating Photovoltaic Systems
  42. Chamatete Kunda, Yalçınkaya Çağlar (2024-10)
    Numerical Assessment of Thermal Bridging Effects in 3D Printed Foam-Concrete Walls
  43. Aminpour Nima, Memari Ali (2024-10)
    Numerical and Experimental Study on Reinforced 3DCP Walls Filled with Lightweight Concrete
  44. Wang Qiang, Yang Wenwei, Wang Li, Zhang Dan et al. (2024-09)
    Flexural Performance of the Integrated Steel-Truss-Reinforced 3D Printed Concrete Beams:
    Experimental and Numerical Analysis
  45. Dulaj Albanela, Peeters Sef, Poorsolhjouy Payam, Salet Theo et al. (2024-09)
    Combined Analytical and Numerical Modelling of the Electrical Conductivity of 3D Printed Carbon-Nano-Tube-Cementitious-Nano-Composites
  46. Dey Dhrutiman, Panda Biranchi (2024-09)
    Numerical Evaluation of Thermal Performance and Improvement-Strategies for 3D Printed Concrete Structures
  47. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-09)
    Effect of Strain-Hardening Material on Seismic-Performance of 3D Printed Concrete Wall:
    A Numerical Study
  48. Qian Shunzhi, Zhao Huanyu, Meng Dan (2024-09)
    Numerical Study of Concrete Beams with 3D Printed Strain-Hardening Cementitious Composites (SHCC)
  49. Daadouch Koussay, Reinold Janis, Meschke Günther (2024-09)
    Numerical Simulation of 3D Concrete Printing:
    From the Layer- to the Structural-Scale
  50. Vasilić Ksenija, Udayakumar Raja, Böhler David, Mai (née Dressler) Inka et al. (2024-09)
    A Numerical Model for Simulating Particle-Bed 3D Printing
  51. Anjos Marcos, Maia José, Souza Dias Leonardo, Medeiros Fernanda et al. (2024-09)
    Effect of the Geometry of Representative Volumetric Masonry Elements:
    Experimental and Numerical Analysis
  52. Mohemmi Morteza, Sadeghian Vahid, Panda Biranchi, Boyle Sheryl (2024-09)
    Numerical Modeling of Lateral Resistance of 3D Printed Concrete Walls
  53. Ravindran Vishwanath, Ranganathan Thiyagarajan, Rahul Attupurathu (2024-08)
    Migration of Particles Suspended in Yield-Stress Fluids:
    Insights from Numerical Simulation of Pipe Flow of 3D Printable Concrete
  54. Nguyen Vuong, Tran Jonathan, San Ha Ngoc, Xie Yi et al. (2024-08)
    Blast-Resistance of 3D Printed Bouligand Concrete Panels Reinforced with Steel-Fibers:
    Numerical Investigations
  55. Shahzad Qamar, Akbar Muhammad, Alzara Majed, Yosri Ahmed et al. (2024-07)
    Time-Dependent Buildability Evaluation of 3D Printed Concrete:
    Experimental Validation and Numerical Simulation
  56. Baktheer Abedulgader, Claßen Martin (2024-07)
    A Review of Recent Trends and Challenges in Numerical Modeling of the Anisotropic Behavior of Hardened 3D Printed Concrete
  57. Gerong Wangdui, Wang Pengfei, Liao Minmao, Chen Zhaohui et al. (2024-07)
    Interfacial Cracking at Layer and Filament Interfaces of 3D Printed Concrete:
    Experimental and Numerical Studies
  58. Sariyev Bakytzhan, Konysbekov Alisher, Jexembayeva Assel, Konkanov Marat (2024-07)
    A Comparative Study of the Rheological Properties of a Fly-Ash-Based Geopolymer Reinforced with PP-Fiber for 3D Printing:
    An Experimental and Numerical Approach
  59. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2024-06)
    Design for Early-Age Structural Performance of 3D Printed Concrete Structures:
    A Parametric Numerical Modeling Approach
  60. Bai Meiyan, Xiao Jianzhuang, Wu Yuching, Ding Tao (2024-05)
    Experimental and Numerical Study on the Flexural Behavior of 3D Printed Composite Beams with U-Shaped ECC Formwork
  61. Liu Zhenbang, Li Mingyang, Wong Teck, Tan Ming (2024-05)
    Determine the Effects of Pore Properties on the Mechanical Performances of 3D Concrete Printing Units with Experimental and Numerical Methods
  62. Jiang Wei, Li Wenqian, Chen Xi (2024-05)
    An Extended Numerical Model of the First Exothermic Peak for Three Dimensional Printed Cement-Based Materials
  63. Tao Yaxin, Zhou Jiangang, Cui Weijiu, Shi Xinyu et al. (2024-04)
    Numerical Assessment of Plastic Yielding in Extrusion-Based 3D Concrete Printing
  64. Wei Ying, Han Song, Chen Ziwei, Lu Jianxian et al. (2024-04)
    Numerical Simulation of 3D Concrete Printing Derived from Printer Head and Printing Process
  65. Chamatete Kunda, Yalçınkaya Çağlar (2024-03)
    Numerical Evaluation on Thermal Performance of 3D Printed Concrete Walls:
    The Effects of Lattice-Type, Filament-Width and Granular-Filling-Material
  66. Chen Meng, Fang Shuai, Wang Guangquan, Xuan Yiwei et al. (2024-03)
    Compressive and Flexural Behavior of Engineered Cementitious Composites-Based Auxetic Structures:
    An Experimental and Numerical Study
  67. Khan Shoukat, İlcan Hüseyin, Imram Ramsha, Aminipour Ehsan et al. (2024-01)
    The Impact of Nozzle-Diameter and Printing Speed on Geopolymer-Based 3D Printed Concrete Structures:
    Numerical Modeling and Experimental Validation
  68. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-01)
    Experimental and Numerical Evaluation of Multi-Directional Compressive and Flexure Behavior of Three-Dimensional Printed Concrete
  69. Reinold Janis, Daadouch Koussay, Meschke Günther (2023-11)
    Numerical Simulation of Three Dimensional Concrete Printing Based on a Unified Fluid and Solid Mechanics Formulation
  70. An Dong, Zhang Yixia, Yang Chunhui (2023-11)
    Numerical Modelling of 3D Concrete Printing:
    Material-Models, Boundary-Conditions and Failure-Identification
  71. Markin Slava, Cordova Julian, Mechtcherine Viktor (2023-10)
    Evolution of Capillary Pressure in 3D Printed Concrete Elements:
    Numerical Modelling and Experimental Validation
  72. Ye Junhong, Yang Minxin, Yu Jiangtao, Dai Yecheng et al. (2023-10)
    Size-Effect on Flexural and Fracture Behaviors of 3D Printed Engineered Cementitious Composites:
    Experimental and Numerical Studies
  73. Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
    A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
    From Analytical Modelling to Numerical Simulation
  74. Saravanan Pradeep, Ramaswamy Ananth (2023-09)
    Numerical Investigation on Inter-Layer and Filament Fracture Behavior of 3D Printed Concrete
  75. Chang Ze, Liang Minfei, Chen Yu, Schlangen Erik et al. (2023-09)
    Does Early-Age Creep Influence Buildability of 3D Printed Concrete?:
    Insights from Numerical Simulations
  76. Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2023-08)
    A 2D Numerical Model of 3D Concrete Printing Including Thixotropy
  77. Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2023-07)
    Numerical Simulation of the Extrusion and Layer-Deposition-Processes in 3D Concrete Printing with the Particle-Finite-Element-Method
  78. Khan Shoukat, İlcan Hüseyin, Aminipour Ehsan, Şahin Oğuzhan et al. (2023-07)
    Buildability-Analysis on Effect of Structural Design in 3D Concrete Printing:
    An Experimental and Numerical Study
  79. Abbaoui Khalid, Korachi Issam, Mollah Md., Spangenberg Jon (2023-06)
    Numerical Modelling of Planned Corner-Deposition in 3D Concrete Printing
  80. Liu Haoran, Xiao Jianzhuang, Ding Tao (2023-03)
    Flexural Performance of 3D Printed Composite Beams with ECC and Recycled Fine Aggregate Concrete:
    Experimental and Numerical Analysis
  81. Cuevas Villalobos Karla, Strzałkowski Jarosław, Kim Ji-Su, Ehm Clemens et al. (2023-02)
    Towards Development of Sustainable Lightweight 3D Printed Wall Building Envelopes:
    Experimental and Numerical Studies
  82. Baghdadi Abtin, Ledderose Lukas, Ameri Shaghayegh, Kloft Harald (2023-02)
    Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of Robotic CNC Manufacturing Technique
  83. Du Wenfeng, Zhu Liming, Zhang Hao, Zhou Zhiyong et al. (2023-01)
    Experimental and Numerical Investigation of an Innovative 3DPC Thin-Shell Structure
  84. Baghdadi Abtin, Heristchian Mahmoud, Ledderose Lukas, Kloft Harald (2023-01)
    Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of the Robotic Subtractive Manufacturing Technique
  85. Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping et al. (2022-11)
    Flow and Deformation Behaviors of Cementitious Materials Through Nozzles with Different Geometric Parameters:
    Experimental and Numerical Approaches
  86. Tanapornraweekit Ganchai, Jiramarootapong Patiphat, Paudel Satish, Tangtermsirikul Somnuk et al. (2022-11)
    Experimental and Numerical Investigation of 3D Printed Mortar Walls Under Uniform Axial Compression
  87. Khan Shoukat, Koç Muammer (2022-10)
    Numerical Modelling and Simulation for Extrusion-Based 3D Concrete Printing:
    The Underlying Physics, Potential, and Challenges
  88. Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2022-09)
    A Numerical Model of 3D Concrete Printing
  89. Park Ji-seul, Jeong Seung-Su, Hong Sung-Gul (2022-09)
    Numerical Analysis on Stability of Cylindrical Structures in 3D Printing Process
  90. Chang Ze, Zhang Hongzhi, Liang Minfei, Schlangen Erik et al. (2022-07)
    Numerical Simulation of Elastic Buckling in 3D Concrete Printing Using the Lattice-Model with Geometric Non-Linearity
  91. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2022-07)
    Numerical Modeling of 3D Concrete Printing Wall Structure to Reliably Estimate the Failure Mechanisms
  92. Fairbairn Eduardo, Santos Larissa, Farias Marina, Mendoza Reales Oscar (2022-07)
    Numerical Modeling of New Conceptions of 3D Printed Concrete Structures for Pumped Storage Hydropower
  93. Spangenberg Jon, Silva Wilson, Mollah Md., Comminal Raphaël et al. (2022-06)
    Integrating Reinforcement with 3D Concrete Printing:
    Experiments and Numerical Modelling
  94. Han Nv, Xiao Jianzhuang, Zhang Lihai, Peng Yu (2022-06)
    A Micro-Scale-Based Numerical Model for Investigating Hygro-Thermo-Mechanical Behavior of 3D Printed Concrete at Elevated Temperatures
  95. Pastore Tommaso, Esposito Laura, Menna Costantino, Asprone Domenico (2022-06)
    Overcoming Fabrication-Constraints in Concrete 3D Printing Using Interlacing Bezier-Curves:
    A Numerical and Experimental Analysis
  96. Liu Haoran, Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2022-04)
    Buildability Prediction of 3D Printed Concrete at Early-Ages:
    A Numerical Study with Drucker-Prager-Model
  97. Pan Tinghong, Teng Huaijin, Liao Hengcheng, Jiang Yaqing et al. (2022-03)
    Effect of Shaping Plate Apparatus on Mechanical Properties of 3D Printed Cement-Based Materials:
    Experimental and Numerical Studies
  98. Ayegba Blessing, Egbe King-James, Nazar Ali, Huang Mingzhi et al. (2022-01)
    Resource Efficiency and Thermal Comfort of 3D Printable Concrete Building Envelopes Optimized by Performance Enhancing Insulation:
    A Numerical Study
  99. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Pedersen David et al. (2022-01)
    Numerical Predictions of Bottom-Layer-Stability in Material-Extrusion Additive Manufacturing
  100. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-12)
    Numerical Modelling-Strategies for Reinforced 3D Concrete Printed Elements
  101. Xu Zhisong, Li Zhuguo, Jiang Fei (2021-11)
    Numerical Approach to Pipe Flow of Fresh Concrete Based on MPS Method
  102. Lauff Philipp, Pugacheva Polina, Rutzen Matthias, Weiss Ursula et al. (2021-11)
    Evaluation of the Behavior of Carbon-Short-Fiber-Reinforced Concrete (CSFRC) Based on a Multi-Sensory Experimental Investigation and a Numerical Multi-Scale Approach
  103. Liu Hanqiu, Egbe King-James, Wang Haipeng, Nazar Ali et al. (2021-11)
    A Numerical Study on 3D Printed Cementitious Composites Mixes Subjected to Axial Compression
  104. Spangenberg Jon, Silva Wilson, Comminal Raphaël, Mollah Md. et al. (2021-10)
    Numerical Simulation of Multi-Layer 3D Concrete Printing
  105. Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-09)
    Energy Performance of 3D Printed Concrete Walls:
    A Numerical Study
  106. Schryver Robin, Cheikh Khadija, Lesage Karel, Yardimci Mert et al. (2021-09)
    Numerical Reliability Study Based on Rheological Input for Bingham-Paste-Pumping Using a Finite Volume Approach in OpenFOAM
  107. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-07)
    Mechanical Characterisation for Numerical Simulation of Extrusion-Based 3D Concrete Printing
  108. Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
    From Analytical Methods to Numerical Simulations:
    A Process Engineering Toolbox for 3D Concrete Printing
  109. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom et al. (2021-06)
    Numerical Simulation for 3D Printed Wall Structure During the Process of Printing Considering Uncertainty
  110. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-06)
    Fire Performance of Innovative 3D Printed Concrete Composite Wall Panels:
    A Numerical Study
  111. Schmidt Albrecht, Mengesha Meron, Göbel Luise, Könke Carsten et al. (2021-05)
    Numerical Modeling of an Extrusion-Based Concrete Printing Process Considering Spatially and Temporarily Varying Material and Process Parameters
  112. Ramyar Elham, Xinwei Z., Cusatis Gianluca (2021-04)
    Numerical Simulation of 3D Printing of Infrastructure Materials
  113. Shakor Pshtiwan, Gowripalan Nadarajah, Rasouli Habib (2021-03)
    Experimental and Numerical Analysis of 3D Printed Cement Mortar Specimens Using Inkjet 3DP
  114. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-02)
    Numerical Study of Fire and Energy Performance of Innovative Lightweight 3D Printed Concrete Wall-Configurations in Modular Building System
  115. Ooms Ticho, Vantyghem Gieljan, Coile Ruben, Corte Wouter (2020-12)
    A Parametric Modelling-Strategy for the Numerical Simulation of 3D Concrete Printing with Complex Geometries
  116. Vantyghem Gieljan, Ooms Ticho, Corte Wouter (2020-11)
    VoxelPrint:
    A Grasshopper Plug-In for Voxel-Based Numerical Simulation of Concrete Printing
  117. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-11)
    Additive Manufacturing of Cementitious Materials by Selective Paste-Intrusion:
    Numerical Modeling of the Flow Using a 2D-Axisymmetric Phase-Field-Method
  118. Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
    Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
    An Experimental and Numerical Study
  119. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2020-07)
    Numerical Modeling of an Extrusion-Based 3D Concrete Printing-Process Considering a Spatially-Varying Pseudo-Density Approach
  120. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-07)
    2D Numerical Modelling of Particle-Bed 3D Printing by Selective Paste-Intrusion
  121. Andersen Sebastian, Silva Wilson, Paegle Ieva, Nielsen Jens (2020-07)
    Numerical Model Describing the Early-Age Behavior of 3D Printed Concrete:
    Work in Progress
  122. Roussel Nicolas, Spangenberg Jon, Wallevik Jon, Wolfs Robert (2020-06)
    Numerical Simulations of Concrete Processing:
    From Standard Formative Casting to Additive Manufacturing
  123. Liu Zhixin, Li Mingyang, Tay Yi, Weng Yiwei et al. (2020-04)
    Rotation-Nozzle and Numerical Simulation of Mass-Distribution at Corners in 3D Cementitious Material-Printing
  124. Comminal Raphaël, Serdeczny Marcin, Pedersen David, Spangenberg Jon (2019-06)
    Motion-Planning and Numerical Simulation of Material-Deposition at Corners in Extrusion Additive Manufacturing
  125. Wolfs Robert, Bos Freek, Salet Theo (2019-06)
    Triaxial Compression Testing on Early-Age Concrete for Numerical Analysis of 3D Concrete Printing
  126. Serdeczny Marcin, Comminal Raphaël, Pedersen David, Spangenberg Jon (2019-05)
    Numerical Simulations of the Mesostructure Formation in Material-Extrusion Additive Manufacturing
  127. Valle‐Pello P., Álvarez‐Rabanal Felipe, Alonso‐Martínez M., Coz Díaz J. (2019-05)
    Numerical Study of the Interfaces of 3D Printed Concrete Using Discrete Element Method
  128. Wolfs Robert, Bos Freek, Salet Theo (2018-02)
    Early-Age Mechanical Behaviour of 3D Printed Concrete:
    Numerical Modelling and Experimental Testing
  129. Cheikh Khadija, Rémond Sébastien, Khalil Noura, Aouad Georges (2017-04)
    Numerical and Experimental Studies of Aggregate-Blocking in Mortar-Extrusion
  130. Herrmann Michael, Sobek Werner (2015-10)
    Functionally Graded Concrete:
    Numerical Design Methods and Experimental Studies on Mass Minimized Components
  131. Wallevik Jon, Krenzer Knut, Schwabe Jörg-Henry (2014-03)
    Numerical Errors in CFD and DEM Modeling