Skip to content

#model

Keywords by Co - Occurrence

  1. Ding Tao, Lian Hongqian (2026-01)
    Buildability Analysis of 3D Concrete Printing:
    A Finite Element Model Incorporating Segment-by-Segment Activation, Nozzle Constraint, and Extrusion Pressure
  2. Ferrara Liberato, Rizzieri Giacomo, Cremonesi Massimiliano (2025-12)
    A Particle Fluid Dynamics Modelling Approach to Design 3D Concrete Printing Materials and Processes
  3. Sunny Akash, Jayaprakash Jaganathan (2025-12)
    Unveiling the Printing Success of Concrete 3D Printed Models:
    A Simulation Study with Voxel Print and Abaqus Using Design of Experiments
  4. Feng Xiaowei, Carvelli Valter, Pan Dongjiang, Zhu Chuankai et al. (2025-12)
    Additive Manufacturing of Hybrid Straw-Soil-Cement Materials for Enhanced Mine Models
  5. Telichko Victor, Slavcheva Galina, Levchenko Artem (2025-12)
    Experimentally Verified FE Model of Bending Reinforced 3D-Printed Concrete Elements
  6. Abbas Yassir, Alsaif Abdulaziz (2025-11)
    Explainable Data-Driven Modeling for Optimized Mix Design of 3D-Printed Concrete:
    Interpreting Nonlinear Synergies Among Binder Components and Proportions
  7. Saravanan Pradeep, Ramaswamy Ananth (2025-11)
    Modelling Buildability Performance of 3D Printable Cementitious Materials Using Chemo-Mechanical Model
  8. Benz Hendrik, Nguyen Trong The, Klemt-Albert Katharina (2025-11)
    Real-Time Vision-Based Defect Detection for Large-Scale on-Site Earthen Additive Manufacturing:
    Annotated Dataset and Dual-Model Framework
  9. Zhu Binrong, Liu Xuhua, Wei Yang, Pan Jinlong (2025-11)
    Predicting the Tensile Performance of 3D-Printed PE Fiber-Reinforced ECC Based on Micromechanics Model
  10. Yavartanoo Fahimeh, Bolhassani Damon, Akbarzadeh Masoud, Ororbia Maximilian et al. (2025-10)
    Advanced Finite Element Modeling of 3D-Printed Post-Tensioned Concrete Beams with Experimental Validation
  11. Uddin Md, Mostazid Md, Faysal Md, Shi Xinjun (2025-10)
    Developing a Novel Strength Predictive Modeling for 3D Printable Geopolymer Concrete:
    An Interpretable Data-Driven Approach
  12. Tanaka Shunsei, Yoshida Kohei, Yamamoto Yujin, Kinomura Koji (2025-10)
    Numerical Evaluation on Buildability of 3D Printing Mortar Based on Time-Dependent Material Model
  13. Lange David, Shen Chuanyue (2025-10)
    Modeling the Fresh Properties of Cement-Based Materials for 3D Concrete Printing
  14. Miri Zahra, Baaj Hassan, Polak Maria (2025-10)
    Exploring Interfaces in 3D-Printed Concrete Through Cohesive Zone Modelling
  15. Akter Usmi, Rezvi Syed, Ratul Md., Kishor Saad (2025-09)
    Optimization of Data-Driven Ensemble Models Using Firefly Algorithm for Enhanced 3D Printed Concrete Strength Prediction
  16. Chen Baixi, Yang Lei, Jiang Sheng (2025-09)
    Stochastic Analysis of 3D Concrete Printing Process with Curvature and Inclination by Explainable Data-Driven Modelling
  17. Tian Xin, Shi Anqi, Fang Zhi, Lin Alexander (2025-09)
    Multi-Interface Effects on Mechanical Behavior in 3D-Printed Concrete Shear Keys:
    A Finite Element Modeling Strategy
  18. Marco Giancarlo, Cheung Lok (2025-09)
    Multimodal Large Language Models for Adaptive 3D Concrete Printing:
    Real-Time Control of Materials and Settings According to Performance Requirements and Environmental Conditions
  19. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
    Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
    A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
  20. Saravanan Pradeep, Ramaswamy Ananth (2025-09)
    Early Age Creep Behavior of 3D Printable Mortar:
    Hydration and Viscoelasticity Coupling Model
  21. Liu Tong, Du Song, Teng Fei, Weng Yiwei (2025-08)
    Energy Consumption Modeling for a Robot Arm in 3D Concrete Printing
  22. Yarlagadda Tejeswar, Zhang Zixin, Jiang Liming, Usmani Asif (2025-08)
    A Conceptual Model for Building Artistic and Geometrically Complex Building Envelopes Using Concrete 3D Printing
  23. Liao Minmao, Gerong Wangdui, Wang Pengfei, Chen Zhaohui (2025-08)
    Determination of Elastic Engineering Constants in an Orthotropic Constitutive Model for Hardened 3D-Printed Concrete
  24. Lyu Libo, Li Weihong, Deng Yongjie, Yu Qiuchun et al. (2025-08)
    Engineering Properties of Magnesium Phosphate Cement Lunar Soil Concrete Under Vacuum Conditions and Its 3D Printing Application for Lunar Dome Model
  25. Yu Qian, Zhang Yamei, Pan Jinlong (2025-08)
    Multi-Scale Orthotropic Damage Constitutive Model for 3D Printed Concrete Informed by Pore Structure
  26. Abid Khasim, Syed Sajid, Khan Majid (2025-08)
    Explainable Machine Learning-Based Model for Predicting Interlayer Bond Strength in 3D Printed Concrete
  27. Lu Qianyang, Mei Song, Ateah Ali, Alsubeai Ali et al. (2025-08)
    Investigating the Strength Performance of 3D Printed Fiber-Reinforced Concrete Using Applicable Predictive Models
  28. Miri Zahra, Aurilio R., Polak Maria, Baaj Hassan (2025-08)
    Interface Bonding in 3D-Printed Concrete:
    Experimental Evaluation and Numerical Modeling
  29. Wagner Gabriel, Silva João, Ribeiro João, Figueiredo Bruno et al. (2025-08)
    A Novel and Flexible Approach to Modeling the Additive Manufacturing Extrusion of Cementitious Materials
  30. Siqueira Neto Luiz, Isgor Burkan, Weiss William (2025-08)
    Modeling Fluid Absorption in Layered Anisotropic Cement-Based Materials
  31. Bayrak Alper, Shaban Nefize, Sarıtaş Afsin, Meral Akgul Cagla (2025-07)
    A Semi-Empirical Framework for Modeling Anisotropy, Spatial Variation and Failure Mechanisms in 3D Printed Concrete
  32. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-06)
    Multiphysics Modelling of 3D Concrete Printing:
    From Material Model to Process Simulation and Optimisation
  33. Cui Weijiu, Ji Dongsheng, Shen Liang, Su Shiyong et al. (2025-06)
    A Neural Network-Based Model for Assessing 3D Printable Concrete Performance in Robotic Fabrication
  34. Zhou Jimmy, Samarasinghe Don, Rotimi James, Feng Zhenan (2025-06)
    Exploring Policy Influences on the Adoption of 3D Concrete Printing Technology:
    A Hypothetical Model
  35. Jendele Libor, Rymeš Jiří, Červenka Jan, Herzfeldt Michaela (2025-06)
    Time Dependent Modelling of Concrete for the Simulation of 3D Printing
  36. Yao Jiaxu, Luo Jie, Qiu Minghong, Nagai Kohei (2025-06)
    Mesoscale Modeling of Anisotropic Compressive Behavior and Pull-Out Performance of 3D Printed Concrete with Steel Bars Using 3D RBSM
  37. Duan Yuhang, Wang Chuan, Yin Binbin, Liew Kim (2025-06)
    Modeling Interfacial Failure in 3D-Printed Concrete via Peridynamics
  38. Warsi Syed, Panda Biranchi, Biswas Pankaj (2025-06)
    Design of Earthquake-Resistant 3D Printed Concrete Wall Based on ACI 318-19:
    Analytical Investigation and Numerical Modelling
  39. Pei Qiang, Zhong Yingzhu, Wang Shuai, Zhang Luxi et al. (2025-06)
    Interlayer Bonding Shear Performance and Constitutive Model of 3DPC with Different Fine Aggregate Gradations
  40. Qi Pengfei, Wang Ziyuan, Yu Ruifang, Pei Qiang et al. (2025-05)
    Optimization Design and Regression Model Analysis of Mechanical Properties of 3D Printed Concrete
  41. Mei Shiming, Li Zheng-Wei, He Ben, Song Jiaqi et al. (2025-05)
    A Novel Large-Scale 3D Printing Apparatus for Complex Geological Models and Its Application
  42. Gribonval Alice, Pierre Maxime, Ducoulombier Nicolas, Sab Karam et al. (2025-05)
    Multi-Physics Modelling of 3D-Printed Concrete Evolution in Environmental Conditions
  43. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi et al. (2025-05)
    Modelling of 3D Concrete Printing Based on SPH Method with the Herschel-Bulkley-Papanastasiou Rheology Model
  44. An Dong, Rahman Mahfuzur, Zhang Y., Yang Chunhui (2025-05)
    Effects of Key 3D Concrete Printing Process Parameters on Layer Shape:
    Experimental Study and Smooth Particle Hydrodynamics Modelling
  45. An Ning, Wang Huai, Wang Peijun, Xu Chuanhua et al. (2025-04)
    Tension-Compression Anisotropic Cohesion Model for the Interlayer Interface of 3D-Printed Concrete Compression Specimens
  46. Ayhan Bahar, Irizarry Elmer, Lale Erol, Yu Ke et al. (2025-04)
    Numerical Simulation of 3D Printed Ultra High-Performance Concrete Using the Lattice Discrete Particle Model
  47. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-04)
    Multiphysics Modelling for 3D Concrete Printing:
    From Printability to Hardened Properties
  48. Gautam Kushagra, Solav Dana, Barath Shany, Austern Guy (2025-03)
    Using Digital Image Correlation to Analyze Deformation in Wood-Based Liquid Deposition Modelling
  49. Hlobil Michal, Michel Luca, Pundir Mohit, Kammer David (2025-03)
    A Thermo-Hygro Model to Determine the Factors Dictating Cold Joint Formation in 3D Printed Concrete
  50. Chen Wei, Pan Jinlong, Zhu Binrong, Han Jinsheng et al. (2025-03)
    Nonlinear Predictive Modeling of Building Rates Incorporating Filament Compression Deformations in 3D Printed Geopolymer Concrete
  51. Suphunsaeng Kantawich, Prasittisopin Lapyote, Pethrung Sirichai, Pansuk Withit (2025-03)
    Fire Performance Evaluation of 3D-Printed Concrete Walls:
    A Combined Full-Scale and Numerical Modeling Approach
  52. Chen Meng, Cheng Jianhua, Zhang Tong, Wang Yuting (2025-03)
    Experimental Characterization and Constitutive Modelling of the Anisotropic Dynamic Compressive Behavior of 3D Printed Engineered Cementitious Composites
  53. Duan Zhenhua, Tao Jie-Lin, Lin Can, Jiao Dengwu et al. (2025-02)
    3D Printing-Driven Dynamic Migration of Lightweight Microspheres in the Printable Mortars:
    Experiment and Modelling
  54. Sangiorgio Valentino, Rossetti Pietro, Polidoro Anthony, Rossi Emilio (2025-02)
    Sustainable Raw-Earth Blocks Achieved with 3D-Printed Formworks:
    Parametric Modeling, Prototyping, and Laboratory Testing
  55. Park Ji-seul, Jeong Seung-Su, Hong Seungkee, Lee Seohyung et al. (2025-02)
    Mechanical Modeling for Prediction of Structural Stability of Cylindrical Structures During 3D Concrete Printing
  56. Chen Wenguang, Liang Long, Zhou Boyang, Ye Junhong et al. (2025-02)
    A Fracture Mechanics Model for Predicting Tensile Strength and Fracture Toughness of 3D Printed Engineered Cementitious Composites
  57. Sangiorgio Valentino, Floris Ignazio, Duran Dayan (2025-01)
    Unified Integration Approach for Bridging BIM Model to 3D Construction Printing and Scale Prototyping
  58. Chen Meng, Yu Kanghao, Zhang Tong, Wang Yuting (2025-01)
    Characterizing and Modelling the Bond-Slip-Behavior of Steel-Bars in 3D Printed Engineered Cementitious Composites
  59. Yu Jie, Teng Fei, Ye Junhong, Zhang Dong et al. (2025-01)
    Size-Dependent Model to Predict the Flexural-Strength of 3D Printed Engineered Cementitious Composites Beams
  60. Zhang Yonghong, Cui Suping, Yang Bohao, Wang Xinxin et al. (2025-01)
    Research on 3D Printing Concrete Mechanical Properties-Prediction-Model Based on Machine-Learning
  61. Baş Sercan, Aydın Ozan, Bundur Zeynep, Guven Gursans (2025-01)
    Building Information Modeling (BIM)-Based On-Site 3D Printer Position-Optimization and Path-Planning for Digital Fabrication
  62. Mousavi Moein, Bengar Habib, Mousavi Fateme, Mahdavinia Pooneh et al. (2024-12)
    Inter-Layer Bond Strength Prediction of 3D Printable Concrete Using Artificial Neural Network:
    Experimental and Modeling Study
  63. Zhang Yu, Yu Zhengxing, Zhang Yunsheng, Zhang Jiufu et al. (2024-12)
    Study on the Predictive Model for Continuous Build-Height of 3D Printed Concrete Based on Printability and Early Mechanical Properties
  64. Zhou Longfei, Gou Mifeng, Zhang Haibo, Hama Yukio (2024-12)
    Investigation of Activated Bauxite-Tailings for Application in 3D Printed Concrete via a Modified Anderson and Anderson-Model
  65. Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
    Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
    Materials, Engineered Properties and Techniques for Additive Manufacturing
  66. Avancini Victor, Quintana-Ruiz Osvaldo, Campello Eduardo (2024-12)
    Assessing 3D Printed Concrete Process Parameters Through Discrete Element Modeling
  67. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
    Structural Analysis of 3D Printed Concrete Walls Under Quasi-Static Cyclic Loading Using Composite Micro-Model
  68. Qian Sen, Li Changqi, Zhao Zeyap, Zi Bin (2024-11)
    Modeling and Experimental Validation of a Cable-Driven Robot for Three-Dimensional Printing Construction
  69. Ji Yianliang, Pott Ursula, Mezhov Alexander, Rößler Christiane et al. (2024-11)
    Modelling and Experimental Study on Static Yield-Stress-Evolution and Structural Build-Up of Cement-Paste in Early-Stage of Cement Hydration
  70. Rymeš Jiří, Červenka Jan, Jendele Libor, Bureš Vladislav et al. (2024-11)
    Integrating 3D Modelling and Non-Linear Numerical Simulations in Concrete Additive Manufacturing
  71. Arif Muhammad, Jan Faizullah, Rezzoug Aïssa, Afridi Muhammad et al. (2024-11)
    Data-Driven Models for Predicting Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Interpretable Machine Learning Algorithms
  72. Lachmayer Lukas, Recker Tobias, Ekanayaka Virama, Hürkamp André et al. (2024-10)
    Multi-Model-Based Additive Manufacturing:
    A Framework for Automated Large-Scale 3D Concrete Printing with Industrial Robots
  73. Lim Sean, Tan Ming (2024-10)
    A Rheological Model for Concrete Additive Manufacturing
  74. Peng Chengming, Yang Zhenjun, Li Hui (2024-10)
    A Predictive Model for Interlayer-Water-Evolution and Experimental Validation of 3D Printed Cementitious Materials
  75. Dong Enlai, Jia Zijian, Jia Lutao, Rao Suduan et al. (2024-10)
    Modeling Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete Based on Stereology-Theory
  76. Sahai Rajan, Bisht Ravindra, Kumar Shivam, Singh Siddharth et al. (2024-10)
    Modeling and Simulation of 3D Printed Concrete Layers and Validation Using Gantry Robotic Printer
  77. Lan Tian, Yang Shutong, Xu Mingqi, Chen Zhengyuan et al. (2024-10)
    Quantitative Assessment of Interfacial-Fracture-Properties in 3D Printed Alkali-Activated Recycled Sand Concrete Based on a Closed-Form Fracture-Model
  78. Chen Yuning, Xia Kailun, Dong Enlai, Cao Ruilin et al. (2024-10)
    A Mechanical Characteristic Capture-Method Considering Printing-Configurations for Buildability-Modeling in Concrete 3D Printing
  79. Slepicka Martin, Borrmann André (2024-09)
    Fabrication Information Modeling for Closed-Loop Design and Quality Improvement in Additive Manufacturing for Construction
  80. Dulaj Albanela, Peeters Sef, Poorsolhjouy Payam, Salet Theo et al. (2024-09)
    Combined Analytical and Numerical Modelling of the Electrical Conductivity of 3D Printed Carbon-Nano-Tube-Cementitious-Nano-Composites
  81. Yoshihara Rei, Hashimoto Katsufumi, Sugiyama Takafumi, Nakase Kota (2024-09)
    Development and Validation of Finite-Element-Constitutive-Model for Meso-Scale Compressive Fracture Behavior of 3D Printed Mortar
  82. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2024-09)
    Multi-Physics Modelling for Extrusion-Based 3D Printing:
    Material, Process and Applications
  83. Walzer Alexander, Kozlova Mariia, Mohite Ashish, Yeomans Julian (2024-09)
    Improving a 3D Concrete Printing Factory Using Stochastic Modelling for Decision-Support
  84. Jacquet Yohan, Spangenberg Jon, Perrot Arnaud (2024-09)
    Exploring Viscosity and Friction Through Temperature:
    Understanding Self-Heating Dynamics of Non-Newtonian 3D Printable Construction Materials via CFD Modeling
  85. Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2024-09)
    Challenging the Limits of Fluid FEM Modelling in 3D Concrete Printing
  86. Vasilić Ksenija, Udayakumar Raja, Böhler David, Mai (née Dressler) Inka et al. (2024-09)
    A Numerical Model for Simulating Particle-Bed 3D Printing
  87. Mezhov Alexander, Robens-Radermacher Annika, Unger Jörg, Schmidt Wolfram (2024-09)
    Effect of the Ambient Temperature on the Structural Build-Up of 3D Printed Concrete:
    Experimental and Modelling Study
  88. Yu Jie, Weng Yiwei, Teng Fei, Ye Junhong et al. (2024-09)
    Prediction of the Flexural Strength of 3D Printed SHCC Beams Based on a Stochastic Size-Dependent Model
  89. Wolfs Robert, Gümrük Idil, Driessen Saar, Ferguson Matthew et al. (2024-09)
    3D Concrete Printing and Circularity:
    Designing, Testing, and Modelling Dry Joints for Structural Applications
  90. Mohemmi Morteza, Sadeghian Vahid, Panda Biranchi, Boyle Sheryl (2024-09)
    Numerical Modeling of Lateral Resistance of 3D Printed Concrete Walls
  91. Ma Liangzhu, Yin Deshun, Ren Jiangtao, Tian Mingyuan et al. (2024-09)
    An Effective Thixotropic Structural-Dynamics Rheological-Model for 3D Printed Concrete Materials in the Flow-State
  92. Gao Jianhao, Wang Chaofeng, Li Jiaqi, Chu S. (2024-09)
    Data-Driven Rheological-Model for 3D Printable Concrete
  93. Zhi Yefan, Teng Teng, Akbarzadeh Masoud (2024-08)
    Designing 3D Printed Concrete Structures with Scaled Fabrication Models
  94. Prem Prabhat, Ambily Parukutty, Kumar Shankar, Giridhar Greeshma et al. (2024-07)
    Structural Build-Up-Model for Three-Dimensional Concrete Printing Based on Kinetics-Theory
  95. Goidea Ana, Popescu Mariana, Johansson Anton, Andreén David (2024-07)
    Algorithmic Modeling of Functionally Graded Metamaterials in 3D Printed Building Envelopes
  96. Baktheer Abedulgader, Claßen Martin (2024-07)
    A Review of Recent Trends and Challenges in Numerical Modeling of the Anisotropic Behavior of Hardened 3D Printed Concrete
  97. Guihéneuf Simon, Audren Mathieu, Lely Nathan, Borgne Tangi et al. (2024-07)
    Monitoring and Modeling of Formwork Pressure Exerted by Castable Earthen Materials
  98. Wang Jinjin, Chen Cheng, Chu Tianwei, Jiang Liming et al. (2024-07)
    Experimental Study and OpenSees Modelling for Thermal Response of 3D Printed Concrete Exposed to Fires
  99. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2024-06)
    Design for Early-Age Structural Performance of 3D Printed Concrete Structures:
    A Parametric Numerical Modeling Approach
  100. Quintana-Ruiz Osvaldo, Campello Eduardo (2024-06)
    DEM Modeling of Advanced Manufacturing Technologies:
    From SLS to 3D Concrete Printing
  101. Nefs Karsten, Sloots Joes, Kroon Kim, Bos Freek et al. (2024-05)
    Analytical Modeling of the Orientation-Dependency of 3D Printed SHCC at Increasing Levels of Scale
  102. Kajzr Daniel, Myslivec Tomáš, Černohorský Josef (2024-05)
    Modelling, Analysis and Comparison of Robot Energy Consumption for Three-Dimensional Concrete Printing Technology
  103. García-Alvarado Rodrigo, Soza-Ruiz Pedro, Moroni-Orellana Ginnia, Pedreros Fernando et al. (2024-05)
    From BIM-Model to 3D Construction Printing:
    A Framework Proposal
  104. Jiang Wei, Li Wenqian, Chen Xi (2024-05)
    An Extended Numerical Model of the First Exothermic Peak for Three Dimensional Printed Cement-Based Materials
  105. Lin Xinbo, Shao Yajian, Ma Guowei, Wang Li (2024-05)
    A New 3D Printing Method and Similar Materials of the Tunnel-Lining for the Geomechanical Model-Test
  106. Cheng Hanbin, Radlińska Aleksandra, Hilman Michael, Liu Feihong et al. (2024-05)
    Modeling Concrete-Deposition via 3D Printing Using Reproducing Kernel-Particle-Method
  107. Sun Bochao, Dominicus Randy, Dong Enlai, Li Peichen et al. (2024-04)
    Predicting the Strength Development of 3D Printed Concrete Considering the Synergistic Effect of Curing-Temperature and Humidity:
    From Perspective of Modified Maturity-Model
  108. Xia Kailun, Chen Yuning, Chen Yu, Jia Zijian et al. (2024-04)
    Understanding and Modeling the Plastic Deformation of 3D Printed Concrete Based on Viscoelastic Creep Behavior
  109. Abbaoui Khalid, Korachi Issam, Jai Mostapha, Šeta Berin et al. (2024-04)
    3D Concrete Printing Using Computational Fluid Dynamics:
    Modeling of Material-Extrusion with Slip-Boundaries
  110. Geng Songyuan, Mei Liu, Cheng Boyuan, Luo Qilong et al. (2024-03)
    Revolutionizing 3D Concrete Printing:
    Leveraging Random-Forest-Model for Precise Printability and Rheological Prediction
  111. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen et al. (2024-03)
    Thermal Network Model for Anisotropic Heat Transfer in 3D Printed Complex Geometry Structures
  112. Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
    Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete
  113. Wijaya Ignasius, Kreiger Eric, Masud Arif (2024-03)
    Modeling of Concrete Printing Process with Frictional Interface
  114. Alhussain Ali, Duarte José, Brown Nathan (2024-02)
    Developing a Data-Driven Filament-Shape-Prediction-Model for 3D Concrete Printing
  115. Wu Dinglue, Luo Qiling, Long Wujian, Zhang Shunxian et al. (2024-02)
    Advancing Construction 3D Printing with Predictive Inter-Layer Bonding Strength:
    A Stacking Model Paradigm
  116. Giudice Lorenzo, Katsamakas Antonios, Liu Bowen, Sarhosis Vasilis et al. (2024-02)
    Physical Modelling of Unreinforced Masonry Walls Using a Sand-Based 3D Printer
  117. Nóbrega Anna, Queiroz Junior Cleanto, Souza Wendell, Cabral Kleber et al. (2024-02)
    Computational Modeling for Structural Element Analysis Using Cement Composites in 3D Printing
  118. Nguyen Vuong, Tran Jonathan, Liu Junli, Tran Mien et al. (2024-02)
    Extended Finite Element Multi-Scale Modelling for Crack Propagation in 3D Printed Fiber-Reinforced Concrete
  119. Khan Shoukat, İlcan Hüseyin, Imram Ramsha, Aminipour Ehsan et al. (2024-01)
    The Impact of Nozzle-Diameter and Printing Speed on Geopolymer-Based 3D Printed Concrete Structures:
    Numerical Modeling and Experimental Validation
  120. Prem Prabhat, Ambily Parukutty, Kumar Shankar, Ghodke Swapnil (2024-01)
    A Theoretical Model to Predict the Structural Buildability of 3D Printable Concrete
  121. Liu Xiongfei, Cai Huachong, Ma Guowei, Hou Guanyu (2024-01)
    Spray-Based 3D Concrete Printing-Parameter Design-Model:
    Actionable Insight for High Printing Quality
  122. Yu Hao, Zhang Weiwei, Yin Binbin, Sun Weikang et al. (2024-01)
    Modeling Extrusion-Process and Layer-Deformation in 3D Concrete Printing via Smoothed Particle-Hydrodynamics
  123. Rogers Helen, Srivastava Mohit, Tsakou Myriam-Elissavet, Prashad Anisha (2024-01)
    Sustainable Supply Chain Models for 3D Printed Houses
  124. Wang Li, Wang Fucheng, Li Rong, Wang Qiao (2023-12)
    Interfacial Constitutive Model of 3D Printed Fiber-Reinforced Concrete Composites and Its Experimental Validation
  125. Liu Qiang, Jiang Quan, Yu Rang, Rong Yao et al. (2023-12)
    Extrusion 3D Printing Circular and Horseshoe Tunnel Physical Models:
    A Comparative Study of Deformation and Brittle Failure
  126. Panda Biranchi, Shakor Pshtiwan, Lagaros Nikos (2023-12)
    Advanced Modelling for Additive Manufacturing in Construction
  127. Vargas José (2023-12)
    Spatially Graded Modeling:
    An Integrated Workflow For 3D Concrete Printing
  128. Alyami Mana, Khan Majid, Fawad Muhammad, Nawahz R. et al. (2023-11)
    Predictive Modeling for Compressive Strength of 3D Printed Fiber-Reinforced Concrete Using Machine Learning Algorithms
  129. Peralta Abadi Patricia, Ahmad Muhammad, Smarsly Kay (2023-11)
    Printing-Information-Modeling for Additive Manufacturing of Concrete Structures
  130. An Dong, Zhang Yixia, Yang Chunhui (2023-11)
    Numerical Modelling of 3D Concrete Printing:
    Material-Models, Boundary-Conditions and Failure-Identification
  131. Markin Slava, Cordova Julian, Mechtcherine Viktor (2023-10)
    Evolution of Capillary Pressure in 3D Printed Concrete Elements:
    Numerical Modelling and Experimental Validation
  132. Perez-Rivera Anthony, Kreiger Eric, Stidwell Samuel, Stynoski Peter et al. (2023-10)
    Finite-Element Modeling of Reinforced Additively Constructed Concrete Structures
  133. Tabakova Vesela, Klug Christina, Schmitz Thomas (2023-10)
    Dynamic Extrusion-Control in Spot-Deposition Modeling for Porous 3D Clay-Structures
  134. Slepicka Martin, Mawas Karam, Borrmann André, Maboudi Mehdi et al. (2023-09)
    Digital Twinning in Additive Manufacturing:
    Closing the Digital-Physical-Digital Loop by Automated Integration of Captured Geometric Data into Fabrication Information Models
  135. Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
    A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
    From Analytical Modelling to Numerical Simulation
  136. Chang Ze, Liang Minfei, He Shan, Schlangen Erik et al. (2023-09)
    Lattice-Modelling of Early-Age Creep of 3D Printed Segments with the Consideration of Stress-History
  137. Rymeš Jiří, Červenka Jan, Jendele Libor (2023-09)
    Material-Modelling and Simulation of 3D Concrete Printing Process
  138. Li Mingyang, Zhang Dong, Wong Teck, Tan Ming et al. (2023-09)
    Modeling and Experimental Investigation of Fiber Orientation in Cast and 3D Printed Cementitious Composites
  139. Mader Thomas, Schreter-Fleischhacker Magdalena, Shkundalova Olena, Neuner Matthias et al. (2023-09)
    Constitutive Modeling of Orthotropic Non-Linear Mechanical Behavior of Hardened 3D Printed Concrete
  140. Zhu Jinggao, Ren Xiaodan, Cervera Miguel (2023-08)
    Buildability Modeling of 3D Printed Concrete Including Printing-Deviation:
    A Stochastic Analysis
  141. Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2023-08)
    A 2D Numerical Model of 3D Concrete Printing Including Thixotropy
  142. Blagojevic Boris, Gienger Andreas, Nigl David, Blandini Lucio et al. (2023-08)
    Modeling, Feedforward-Control, and Constrained Trajectory-Generation for a Concrete-Conveyance-System
  143. Nadoury Wegdan, Mohamed Ashraf (2023-08)
    Modelling the Temperature Gradient in 3D Concrete Printing
  144. Wang Qing, Ren Xiaodan, Li Jie (2023-08)
    Damage-Rheology Model for Predicting 3D Printed Concrete Buildability
  145. Mollah Md., Comminal Raphaël, Silva Wilson, Šeta Berin et al. (2023-07)
    Computational Fluid Dynamics Modelling and Experimental Analysis of Reinforcement-Bar-Integration in 3D Concrete Printing
  146. Slepicka Martin, Helou Jalal, Borrmann André (2023-07)
    Real-Time Data Exchange Robot-Control Integration for Fabrication Information Modeling
  147. Robens-Radermacher Annika, Unger Jörg, Mezhov Alexander, Schmidt Wolfram (2023-07)
    Temperature-Dependent Modelling Approach for Early-Age Behavior of Printable Mortars
  148. Ali Ammar, Riaz Raja, Malik Umair, Abbas Syed et al. (2023-06)
    Machine-Learning-Based Predictive-Model for Tensile and Flexural Strength of 3D Printed Concrete
  149. Paudel Satish (2023-06)
    Investigation of Modelling Approaches to Study the Structural Performance of 3D Printed Plain Wall Under Uniform Axial Compression
  150. Abbaoui Khalid, Korachi Issam, Mollah Md., Spangenberg Jon (2023-06)
    Numerical Modelling of Planned Corner-Deposition in 3D Concrete Printing
  151. Wang Youyu, Ma Guowei, Wang Li, Zhang Wengang et al. (2023-04)
    Size-Effects in Cavern-Model-Tests Based on 3D Printing
  152. Ekanayaka Virama, Hürkamp André (2023-03)
    Implementation of a Surrogate-Model for a Novel Path‐Based Finite-Element-Simulation for Additive Manufacturing-Processes in Construction
  153. Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
    Computational Modeling of Fiber Orientation During 3D Concrete Printing
  154. Daadouch Koussay, Reinold Janis, Gudžulić Vladislav, Meschke Günther (2023-03)
    Computational Modeling of Fiber Orientation During 3D Concrete Printing
  155. Waqar Ahsan, Othman Idris, Pomares Juan (2023-02)
    Impact of 3D Printing on the Overall Project Success of Residential Construction Projects Using Structural Equation Modelling
  156. Pang Zhiming, Lu Cong, Li Baoshan, Wang Jiajie (2023-02)
    A Multi-Scale Model for Quantifying Fiber-Orientation Effects on the Tensile Properties of 3D Printed Engineered Cementitious Composites
  157. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-02)
    Parametric Modelling of 3D Printed Concrete Segmented Beams with Rebars Under Bending Moments
  158. Chang Ze, Liang Minfei, Xu Yading, Wan Zhi et al. (2023-02)
    Early-Age Creep of 3D Printable Mortar:
    Experiments and Analytical Modelling
  159. Choo Joshua, Mohammed Bashar, Chen Pei-Shan, Abdulkadir Isyaka et al. (2022-12)
    Modeling and Optimizing the Effect of 3D Printed Origami-Bubble-Aggregate on the Mechanical and Deformation Properties of Rubberized ECC
  160. Miranda Luiza, Marchesini Flávio, Lesage Karel, Schutter Geert (2022-12)
    The Evolution of the Rheological Behavior of Hydrating Cement Systems:
    Combining Constitutive Modeling with Rheometry, Calorimetry and Mechanical Analyses
  161. Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
    Modelling of 3D Concrete Printing Process:
    A Perspective on Material and Structural Simulations
  162. Abbaoui Khalid, Korachi Issam, Mollah Md., Spangenberg Jon (2022-11)
    CFD Modelling of Mortar-Extrusion and Path-Planning-Strategy at the Corner for 3D Concrete Printing
  163. Kamel Ehsan, Kazemian Ali (2022-11)
    BIM-Integrated Thermal Analysis and Building Energy Modeling in 3D Printed Residential Buildings
  164. Lachmayer Lukas, Böhler David, Freund Niklas, Mai (née Dressler) Inka et al. (2022-11)
    Modelling the Influence of Material and Process Parameters on Shotcrete 3D Printed Strands:
    Cross-Section Adjustment for Automatic Robotic Manufacturing
  165. Nguyen Vuong, Liu Junli, Li Shuai, Zhang Guomin et al. (2022-10)
    Modelling of 3D Printed Bio-Inspired Bouligand Cementitious Structures Reinforced with Steel-Fibers
  166. Khan Shoukat, Koç Muammer (2022-10)
    Numerical Modelling and Simulation for Extrusion-Based 3D Concrete Printing:
    The Underlying Physics, Potential, and Challenges
  167. Mansouri Abraham, Binali Alreem, Aljawi Abdulla, Alhammadi Ahmed et al. (2022-10)
    Thermal Modeling of the Convective Heat-Transfer in the Large Air-Cavities of the 3D Concrete Printed Walls
  168. Rizzieri Giacomo, Cremonesi Massimiliano, Ferrara Liberato (2022-09)
    A Numerical Model of 3D Concrete Printing
  169. Meschke Günther, Neu Gerrit, Gudžulić Vladislav, Reinold Janis et al. (2022-09)
    Computational Modeling of FRC:
    From 3D Printing to Robust Design
  170. Chang Ze, Liang Minfei, Xu Yading, Schlangen Erik et al. (2022-08)
    3D Concrete Printing:
    Lattice Modeling of Structural Failure considering Damage and Deformed Geometry
  171. Slepicka Martin, Vilgertshofer Simon, Borrmann André (2022-07)
    Fabrication Information Modeling:
    Interfacing Building Information Modeling with Digital Fabrication
  172. Chang Ze, Zhang Hongzhi, Liang Minfei, Schlangen Erik et al. (2022-07)
    Numerical Simulation of Elastic Buckling in 3D Concrete Printing Using the Lattice-Model with Geometric Non-Linearity
  173. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2022-07)
    Numerical Modeling of 3D Concrete Printing Wall Structure to Reliably Estimate the Failure Mechanisms
  174. Nedjar Boumediene, Awada Zeinab (2022-07)
    Incremental Formulation of Early-Age Concrete in the Finite Strain Range for the Modelling of 3D Concrete Printing
  175. Fairbairn Eduardo, Santos Larissa, Farias Marina, Mendoza Reales Oscar (2022-07)
    Numerical Modeling of New Conceptions of 3D Printed Concrete Structures for Pumped Storage Hydropower
  176. Galé Benjamin, Ursenbacher Thierry, Petit Agnès, Bourquin Vincent (2022-06)
    Shotcrete 3DCP Projection-Angle and Speed-Optimization:
    Experimental Approaches and Theoretical Modelling
  177. Mezhov Alexander, Robens-Radermacher Annika, Zhang Kun, Kühne Hans-Carsten et al. (2022-06)
    Temperature Impact on the Structural Build-Up of Cementitious Materials:
    Experimental and Modelling Study
  178. Spangenberg Jon, Silva Wilson, Mollah Md., Comminal Raphaël et al. (2022-06)
    Integrating Reinforcement with 3D Concrete Printing:
    Experiments and Numerical Modelling
  179. Kruger Jacques, Mostert Jean-Pierre, Zijl Gideon (2022-06)
    A Strain-Based Constitutive Model Ensuring Aesthetic 3D Printed Concrete Structures:
    Limiting Differential Settlement of Filaments
  180. Han Nv, Xiao Jianzhuang, Zhang Lihai, Peng Yu (2022-06)
    A Micro-Scale-Based Numerical Model for Investigating Hygro-Thermo-Mechanical Behavior of 3D Printed Concrete at Elevated Temperatures
  181. Ekanayaka Virama, Lachmayer Lukas, Raatz Annika, Hürkamp André (2022-06)
    Approach to Optimize the Inter-Layer Waiting Time in Additive Manufacturing with Concrete Utilizing FEM Modeling
  182. Galeote Eduardo, Egea Carlos, Fuente Albert (2022-06)
    Characterisation and Modelling of a 3D Concrete Printed Wall under Flexure
  183. Shkundalova Olena, Molkens Tom, Claßen Martin, Rossi Barbara (2022-05)
    Computational Modelling of Material-Behavior of Layered 3D Printed Concrete
  184. Reinold Janis, Gudžulić Vladislav, Meschke Günther (2022-05)
    Fiber-Orientation Modeling During Extrusion-Based 3D Concrete Printing
  185. Wijaya Ignasius, Kreiger Eric, Masud Arif (2022-05)
    An Elastic‐Inelastic Model and Embedded Bounce‐Back-Control for Layered Printing with Cementitious Materials
  186. Kuzmenko Kateryna, Ducoulombier Nicolas, Féraille Adélaïde, Roussel Nicolas (2022-05)
    Environmental Impact of Extrusion-Based Additive Manufacturing:
    Generic Model, Power-Measurements and Influence of Printing-Resolution
  187. Prem Prabhat, Ravichandran Darssni, Kaliyavaradhan Senthil, Ambily Parukutty (2022-04)
    Comparative Evaluation of Rheological Models for 3D Printable Concrete
  188. Liu Haoran, Ding Tao, Xiao Jianzhuang, Mechtcherine Viktor (2022-04)
    Buildability Prediction of 3D Printed Concrete at Early-Ages:
    A Numerical Study with Drucker-Prager-Model
  189. Ignatova Elena, Kirichek Pavel (2022-04)
    Additive Manufacturing Based on Building Information-Model-Data
  190. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2022-04)
    A Plastic Shrinkage Cracking-Risk-Model for 3D Printed Concrete Exposed to Different Environments
  191. Nguyen Vuong, Nguyen-Xuan Hung, Panda Biranchi, Tran Jonathan (2022-03)
    3D Concrete Printing Modelling of Thin-Walled Structures
  192. Zhi Peng, Wu Yuching, Yang Qianfan, Kong Xiangrui et al. (2022-03)
    Effect of Spiral Blade Geometry on 3D Printed Concrete Rheological Properties and Extrudability Using Discrete Event Modeling
  193. Yang Shutong, Lan Tian, Sun Zhongke, Xu Mingqi et al. (2022-03)
    A Predictive Model to Determine Tensile Strength and Fracture-Toughness of 3D Printed Fiber-Reinforced Concrete Loaded in Different Directions
  194. Heever Marchant, Plessis Anton, Bester Frederick, Kruger Jacques et al. (2022-02)
    A Mechanistic Evaluation Relating Microstructural Morphology to a Modified Mohr-Griffith Compression-Shear Constitutive-Model for 3D Printed Concrete
  195. Suntharalingam Thadshajini, Upasiri Irindu, Nagaratnam Brabha, Poologanathan Keerthan et al. (2022-01)
    Finite Element Modelling to Predict the Fire Performance of Bio-Inspired 3D Printed Concrete Wall Panels Exposed to Realistic Fire
  196. Castano-Alvarez Ruben, Calderon-Uriszar-Aldaca Iñigo, Marcos Ignacio (2021-12)
    Applicability of Existing Models for the Strength Development of 3D Printed Thixotropic Concretes During Hardening
  197. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-12)
    Numerical Modelling-Strategies for Reinforced 3D Concrete Printed Elements
  198. Tavangar Tooran, Hosseinpoor Masoud, Yahia Ammar, Khayat Kamal (2021-12)
    Novel Tri-Viscous-Model to Simulate Pumping of Flowable Concrete Through Characterization of Lubrication-Layer and Plug-Zones
  199. Wang Hailong, Shao Jianwen, Zhang Jing, Zou Daoqin et al. (2021-11)
    Bond Shear Performances and Constitutive Model of Interfaces Between Vertical and Horizontal Filaments of 3D Printed Concrete
  200. Lachmayer Lukas, Ekanayaka Virama, Hürkamp André, Raatz Annika (2021-11)
    Approach to an Optimized Printing Path for Additive Manufacturing in Construction Utilizing FEM Modeling
  201. Ramyar Elham, Cusatis Gianluca (2021-11)
    Discrete Fresh Concrete-Model for Simulation of Ordinary, Self-Consolidating, and Printable Concrete-Flow
  202. Giudice Lorenzo, Wróbel Rafał, Katsamakas Antonios, Leinenbach Christian et al. (2021-11)
    Physical Modelling of Reinforced Concrete at a 1:40-Scale Using Additively Manufactured Reinforcement Cages
  203. Slepicka Martin, Vilgertshofer Simon, Borrmann André (2021-11)
    Fabrication Information Modeling:
    Closing the Gap between Building Information Modeling and Digital Fabrication
  204. Esposito Laura, Casagrande Lorenzo, Menna Costantino, Asprone Domenico et al. (2021-10)
    Early-Age Creep Behavior of 3D Printable Mortars:
    Experimental Characterisation and Analytical Modelling
  205. Nedjar Boumediene (2021-09)
    Incremental Viscoelasticity at Finite Strains for the Modelling of 3D Concrete Printing
  206. Galeote Eduardo, Fuente Albert (2021-09)
    Novel Compressive Constitutive-Model for 3D Printed Concrete
  207. Moelich Gerrit, Kruger Jacques, Combrinck Riaan (2021-09)
    Modelling the Inter-Layer Bond Strength of 3D Printed Concrete with Surface Moisture
  208. Nedjar Boumediene (2021-07)
    On a Geometrically Non-Linear Incremental Formulation for the Modeling of 3D Concrete Printing
  209. Fataei Shirin, Secrieru Egor, Mechtcherine Viktor, Roussel Nicolas (2021-07)
    A First-Order Physical Model for the Prediction of Shear-Induced Particle-Migration and Lubricating-Layer Formation During Concrete Pumping
  210. Schmidt Albrecht, Mengesha Meron, Göbel Luise, Könke Carsten et al. (2021-05)
    Numerical Modeling of an Extrusion-Based Concrete Printing Process Considering Spatially and Temporarily Varying Material and Process Parameters
  211. Chang Ze, Xu Yading, Chen Yu, Gan Yidong et al. (2021-05)
    A Discrete Lattice-Model for Assessment of Buildability Performance of 3D Printed Concrete
  212. Ghourchian Sadegh, Butler Marko, Krüger Markus, Mechtcherine Viktor (2021-04)
    Modelling the Development of Capillary Pressure in Freshly 3D Printed Concrete Elements
  213. Weger Daniel, Pierre Alexandre, Perrot Arnaud, Kränkel Thomas et al. (2021-01)
    Penetration of Cement-Pastes into Particle-Beds:
    A Comparison of Penetration Models
  214. Nguyen Vuong, Panda Biranchi, Zhang Guomin, Nguyen-Xuan Hung et al. (2021-01)
    Digital Design Computing and Modelling for 3D Concrete Printing
  215. Daungwilailuk Totsawat, Pheinsusom Phoonsak, Pansuk Withit (2021-01)
    Uniaxial Load Testing of Large-Scale 3D Printed Concrete Wall and Finite-Element-Model-Analysis
  216. Ooms Ticho, Vantyghem Gieljan, Coile Ruben, Corte Wouter (2020-12)
    A Parametric Modelling-Strategy for the Numerical Simulation of 3D Concrete Printing with Complex Geometries
  217. Sterckx Peter, Walker Ian (2020-11)
    Modeling and Design-Optimization of Robotic Hoses for 3D Printing of Cement
  218. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-11)
    Additive Manufacturing of Cementitious Materials by Selective Paste-Intrusion:
    Numerical Modeling of the Flow Using a 2D-Axisymmetric Phase-Field-Method
  219. Mohamed Shibly Maahir, Soto Borja (2020-10)
    Threat Modeling in Construction:
    An Example of a 3D Concrete Printing System
  220. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-10)
    Modelling of 3D Concrete Printing Based on Computational Fluid Dynamics
  221. Dwivedi Ashutosh, Pal Ankit, Patel Shiv, Chourasia Ajay et al. (2020-10)
    Evaluation of Model 3D Printer and Design Mix for 3D Concrete Printing
  222. Chang Ze, Schlangen Erik, Šavija Branko (2020-07)
    Extended-Lattice-Model to Simulate the Printing-Process of 3D Printed Cementitious Materials
  223. Benamara Abdeslam, Pierre Alexandre, Kaci Abdelhak, Mélinge Yannick (2020-07)
    3D Printing of a Cement-Based Mortar in a Complex Fluid Suspension:
    Analytical Modeling and Experimental Tests
  224. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2020-07)
    Numerical Modeling of an Extrusion-Based 3D Concrete Printing-Process Considering a Spatially-Varying Pseudo-Density Approach
  225. Pierre Alexandre, Weger Daniel, Perrot Arnaud, Lowke Dirk (2020-07)
    2D Numerical Modelling of Particle-Bed 3D Printing by Selective Paste-Intrusion
  226. Andersen Sebastian, Silva Wilson, Paegle Ieva, Nielsen Jens (2020-07)
    Numerical Model Describing the Early-Age Behavior of 3D Printed Concrete:
    Work in Progress
  227. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-07)
    Influence of Processing Parameters on the Layer Geometry in 3D Concrete Printing:
    Experiments and Modelling
  228. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2020-04)
    A Rheology-Based Quasi-Static Shape-Retention-Model for Digitally Fabricated Concrete
  229. Liu Zhixin, Li Mingyang, Weng Yiwei, Qian Ye et al. (2020-03)
    Modelling- and Parameter-Optimization for Filament-Deformation in 3D Cementitious Material-Printing Using Support-Vector-Machine
  230. Park Keunhyoung, Memari Ali, Hojati Maryam, Zahabi Mehrzad et al. (2020-03)
    Experimental Testing and Finite Element Modeling of 3D Printed Reinforced Concrete Beams
  231. Haustein Martin, Kluwe Moritz, Schwarze Rüdiger (2020-03)
    Experimental Investigation of the Pumping of a Model-Concrete Through Pipes
  232. Yassin Abdallah, Hamzeh Farook, Sakka Fatima (2019-12)
    Agent-Based Modeling to Optimize Workflow of Robotic Steel and Concrete 3D Printers
  233. Gradeci Klodian, Labonnote Nathalie (2019-11)
    On the Potential of Integrating Building Information Modelling for the Additive Manufacturing of Concrete Structures
  234. Celorrio-Barragué Luis, Calvo-Simón Sergio, Gaspar Marcelo, Vidal-Cortés Mariano et al. (2019-10)
    3D Printed Models-Based Lab Activities to Enhance Learning-Teaching Processes in Structural Engineering Courses
  235. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-09)
    Quantifying Constructability Performance of 3D Concrete Printing via Rheology-Based Analytical Models
  236. Jendele Libor, Červenka Jan, Vaitová Michaela (2019-09)
    FEM Modelling of Digitally Printed Concrete Structures Using 3D-Extrusion
  237. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
    3D Concrete Printing:
    A Lower-Bound Analytical Model for Buildability-Performance-Quantification
  238. Ducoulombier Nicolas (2019-06)
    Characterisation and Modelling of Interfacial-Damage in Fiber-Reinforced Concrete for 3D Printing in Construction
  239. Zhang Xun, Flood Ian, Zhang Yuanxin, Moud Hashem et al. (2019-06)
    A Cost-Model to Evaluate the Economic Performance of Contour Crafting
  240. Krause Martin, Otto Jens (2019-05)
    Digital Process Model for Concrete 3D Printing
  241. Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2019-02)
    Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model
  242. Im Hyeonji, Othman Sulaiman, Castillo Jose (2018-10)
    Responsive Spatial Print:
    Clay 3D Printing of Spatial Lattices Using Real-Time Model-Recalibration
  243. Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
    Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing
  244. Liu Jingkuang, Li Guokai (2018-08)
    Research on the Development of 3D Printing Construction Industry Based on Diamond-Model
  245. Wolfs Robert, Bos Freek, Salet Theo (2018-02)
    Early-Age Mechanical Behaviour of 3D Printed Concrete:
    Numerical Modelling and Experimental Testing
  246. Tomé Ana, Vizotto Isaías, Valença Jónatas, Júlio Eduardo (2018-02)
    Innovative Method for Automatic Shape-Generation and 3D Printing of Reduced-Scale Models of Ultra-Thin Concrete Shells
  247. Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2018-01)
    Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model
  248. Lim Sungwoo, Buswell Richard, Valentine Philip, Piker Daniel et al. (2016-06)
    Modelling Curved-Layered Printing Paths for Fabricating Large-Scale Construction Components
  249. Wallevik Jon, Krenzer Knut, Schwabe Jörg-Henry (2014-03)
    Numerical Errors in CFD and DEM Modeling