Skip to content

#simulation

Keywords by Co - Occurrence

  1. Tripathi Avinaya, Nair Sooraj, Rajan Subramaniam, Sant Gaurav et al. (2026-04)
    Deformation-Based Buildability Assessment of 3D Printed Concrete and Its Numerical Simulation
  2. Rizzieri Giacomo, Bos Derk, Wolfs Robert, Ferrara Liberato et al. (2026-04)
    A Unified Fluid-Solid Elasto-Viscoplastic Finite Element Model for the Simulation of 3D Concrete Printing Across Process Scales
  3. Zhu Tao, Wu Yuching, Zhi Peng, Zhu Peng et al. (2026-03)
    Non-Ordinary State-Based Peridynamics Simulation for Crack Propagation of 3D-Printed Fiber-Reinforced Concrete Beam Under Bending
  4. Wang Qingwei, Pan Jinlong, Han Song, Zhu Binrong et al. (2026-03)
    Effects of Nozzle Height on the Layer Deposition Process and Forming Performance of 3D Printing Concrete:
    Evidence from Experiments and CFD Simulations
  5. Kumar S., Kumar L., Muthu Nelson, Panda Biranchi (2026-03)
    Toward Efficient Simulation of Cracked 3D-Printed Concrete Beams:
    Analytical and Homogenized Finite Element Approach
  6. Campello Eduardo, Avancini Victor, Quintana-Ruiz Osvaldo (2026-03)
    A DEM-Based Simulation Framework for 3D Concrete Printing with the Discrete Fresh Concrete Model
  7. Hammad Y., Tittelboom Kim, Wan-Wendner Roman, Vorel J. (2026-03)
    Multiphysics Simulation of Time-Dependent Early-Age Behaviourin 3D Printed Concrete
  8. Jia Ru, Huang Xin, Yang Haoran, Yao Weijing et al. (2026-03)
    Based on X-CT and DEM Simulation:
    A Study on Performance Anisotropy and Mechanisms of 3D Printed Concrete
  9. Zhang Wenchang, Liu Chuanqi, Weng Yiwei, Xue Tianju et al. (2026-02)
    A Differentiable Material Point Method Solver for the Modeling, Simulation and Analysis of Extrusion-Flow Process for 3D Concrete Printing
  10. Bassel Abdelshahid, Yasmeen A., Khaled Nassar (2026-02)
    Simulation-Based 3D Concrete Printing Toolpath Optimization Considering Concrete Rheology and Supporting Activities
  11. An Dong, Zhu Zhi, Rahman Mahfuzur, Zhang Y. et al. (2026-01)
    Process-Informed Smooth Particle Hydrodynamics-Finite Element (SPH-FE) Simulation of 3D Concrete Printing:
    From Flow Behaviour to Structural Failure
  12. Mohammed Salhah, Aljewifi Hana, Jldain Hafeth (2025-12)
    Evaluating Compressive Strength in 3D-Printed Concrete Structures:
    A Comparative Study of ANSYS Simulations and Experimental Data
  13. Rodriguez Fabian, Vugteveen Caiden, Fross Xavier, Wei Hui et al. (2025-12)
    3D Printing of Cement-Based Materials Using Seawater for Simulated Marine Environments
  14. Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-12)
    3D Printing of Simulated Lunar Soil Geopolymer and Analysis of Its Weak Surface and Anisotropic Performance
  15. Sunny Akash, Jayaprakash Jaganathan (2025-12)
    Unveiling the Printing Success of Concrete 3D Printed Models:
    A Simulation Study with Voxel Print and Abaqus Using Design of Experiments
  16. Yu Hao, Zhang Weiwei, Liew Jia, Yin Binbin et al. (2025-11)
    Simulating Material Flow and Extrusion Dynamics in 3D Concrete Printing
  17. Lale Erol, Ayhan Bahar, Ahmed Ayesha, Irizarry Elmer et al. (2025-10)
    Computational Simulations Fresh-to-Solid Transition for Additive Manufacturing of Ultra-High-Performance Fiber Reinforced Concrete
  18. Válek Josef, Romanová Dorota (2025-09)
    3D Concrete Printing Simulating Device in Comparison to Real Printing and Aggregate Substitutes
  19. Yamakawa Soji, Vazquez-Santiago Kyshalee, Xia Yixuan, Ogura Hiroki et al. (2025-09)
    Concrete Spray 3D Printing Simulator for Nozzle Trajectory Planning
  20. Xu Raymond, Morita Luka, Khosravian Parmida, Itani Anas (2025-07)
    Scaled-Down Simulation and Analysis of On-Site Robotic Fabrication and Construction
  21. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-06)
    Multiphysics Modelling of 3D Concrete Printing:
    From Material Model to Process Simulation and Optimisation
  22. Mansour Ali, Abou Khalil Amine, Khoury Hiam (2025-06)
    Toward Spatial and Cognitive Human-Robot Interaction:
    A Game-Based Simulation for Concrete 3D Printing in Construction
  23. Jendele Libor, Rymeš Jiří, Červenka Jan, Herzfeldt Michaela (2025-06)
    Time Dependent Modelling of Concrete for the Simulation of 3D Printing
  24. Wu Changzhong, Zhu Xingyu, Wu Liang, An Haibo et al. (2025-04)
    Design and Simulation Analysis of the Extrusion Device of Concrete 3D Printing Device
  25. Ayhan Bahar, Irizarry Elmer, Lale Erol, Yu Ke et al. (2025-04)
    Numerical Simulation of 3D Printed Ultra High-Performance Concrete Using the Lattice Discrete Particle Model
  26. Zhang Ziqi, Pan Tinghong, Guoa Rongxin, Lin Runsheng et al. (2025-04)
    Simulation and Analysis of Material Stacking and Migration Induced by Extrusion Behavior in 3D Printed Concrete
  27. Liu Chao, Liang Zhan, Liu Huawei, Wu Yiwen et al. (2025-03)
    Seismic Performance of 3D Printed Reinforced Concrete Walls:
    Experimental Study and Numerical Simulation
  28. Li Liqing, Shi Zhenkun, Wang Lei, Sui Yi et al. (2025-03)
    Experimental Study on Rheological Properties and 3D Printing of Simulated Lunar Soil Polymers
  29. Zhang Tianjie, Wang Donglei, Lu Yang (2025-01)
    A Navier-Stokes-Informed Neural Network for Simulating the Flow-Behavior of Flowable Cement-Paste in 3D Concrete Printing
  30. Do Duc, Diab Zeinab, Rémond Sébastien, Hoxha Dashnor (2025-01)
    Numerical Simulation-Tools for 3D Printing
  31. Li Fangyuan, Hu Xiangcheng, Shahzad Qamar (2024-12)
    Anisotropic Behavior in 3D Printed Concrete:
    Finite Element Simulation Approach
  32. Santos da Mata Gomes Daniela, Rocutan Melina, Pereira Lucas, Motezuki Fabio et al. (2024-12)
    Simulation of 3D Concrete Printing Using an Implicit Formulation of the Moving Particle Semi-Implicit Method
  33. Rymeš Jiří, Červenka Jan, Jendele Libor, Bureš Vladislav et al. (2024-11)
    Integrating 3D Modelling and Non-Linear Numerical Simulations in Concrete Additive Manufacturing
  34. Sahai Rajan, Bisht Ravindra, Kumar Shivam, Singh Siddharth et al. (2024-10)
    Modeling and Simulation of 3D Printed Concrete Layers and Validation Using Gantry Robotic Printer
  35. Chen Baixi, Zhao Xueqi, Qian Xiaoping (2024-09)
    Voxel-Based Path-Driven 3D Concrete Printing Process Simulation Framework Embedding Inter-Layer Behavior
  36. Daadouch Koussay, Reinold Janis, Meschke Günther (2024-09)
    Numerical Simulation of 3D Concrete Printing:
    From the Layer- to the Structural-Scale
  37. Vasilić Ksenija, Udayakumar Raja, Böhler David, Mai (née Dressler) Inka et al. (2024-09)
    A Numerical Model for Simulating Particle-Bed 3D Printing
  38. Ravindran Vishwanath, Ranganathan Thiyagarajan, Rahul Attupurathu (2024-08)
    Migration of Particles Suspended in Yield-Stress Fluids:
    Insights from Numerical Simulation of Pipe Flow of 3D Printable Concrete
  39. Dahlenburg Maximilian, Tan Yuan, Li Mengxue, Ajmal Moshin et al. (2024-08)
    A Flexible and Efficient Calibration Method for Discrete Element Simulations of Additive Manufacturing in Construction
  40. Shahzad Qamar, Akbar Muhammad, Alzara Majed, Yosri Ahmed et al. (2024-07)
    Time-Dependent Buildability Evaluation of 3D Printed Concrete:
    Experimental Validation and Numerical Simulation
  41. Sahai Rajan, Bisht Ravindra, Singh Siddharth, Panigrahi Soraj (2024-07)
    Design-Analysis and Development of a Gantry Robot for Multi-Layer 3D Concrete Printing with Simulation and Experimental Validation
  42. Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-07)
    CFD Simulation of Twin-Pipe Pumping Process for 3D Concrete Printing
  43. Duarte Gonçalo, Brown Nathan, Duarte José (2024-07)
    Workflow for Generating, Simulating, and Optimizing Form and Tool-Path in 3D Concrete Printing of Vaults
  44. Ostovari Shadi, Shayani Hooman (2024-06)
    Simulation and Analysis of Automated Generalised Interleaved Layered Execution (AGILE) Process for Concrete Shell-Structures
  45. Zhi Peng, Wu Yuching, Bai Meiyan (2024-06)
    Determining the Effect of Geometric and Dynamic Properties of Screws on Fiber-Orientation During FRC 3D Printing Based on Discrete Element Simulation
  46. Wei Ying, Han Song, Chen Ziwei, Lu Jianxian et al. (2024-04)
    Numerical Simulation of 3D Concrete Printing Derived from Printer Head and Printing Process
  47. Suthar Mahendrabhai, Shariff Najeeb, Nanthagopalan Prakash (2023-12)
    Performance-Assessment of Topologically Optimised 3D Printable Concrete Sewer Cross-Section Using Finite Element Simulation
  48. Reinold Janis, Daadouch Koussay, Meschke Günther (2023-11)
    Numerical Simulation of Three Dimensional Concrete Printing Based on a Unified Fluid and Solid Mechanics Formulation
  49. Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
    A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
    From Analytical Modelling to Numerical Simulation
  50. Rymeš Jiří, Červenka Jan, Jendele Libor (2023-09)
    Material-Modelling and Simulation of 3D Concrete Printing Process
  51. Christen Heidi, Zijl Gideon, Villiers Wibke, Moelich Migael (2023-09)
    Validated Simulation of Thermal Performance of Phase-Change-Material-Infused Recycled Brick-Aggregate in 3D Printed Concrete
  52. Chang Ze, Liang Minfei, Chen Yu, Schlangen Erik et al. (2023-09)
    Does Early-Age Creep Influence Buildability of 3D Printed Concrete?:
    Insights from Numerical Simulations
  53. Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2023-07)
    Numerical Simulation of the Extrusion and Layer-Deposition-Processes in 3D Concrete Printing with the Particle-Finite-Element-Method
  54. Breseghello Luca, Hajikarimian Hamed, Jørgensen Henrik, Naboni Roberto (2023-07)
    3DLightBeam+:
    Design, Simulation, and Testing of Carbon-Efficient Reinforced 3D Concrete Printed Beams
  55. Forcael Eric, Martínez-Chabur Paula, Ramírez-Cifuentes Iván, García-Alvarado Rodrigo et al. (2023-05)
    Performance-Analysis of 3D Concrete Printing Processes Through Discrete-Event-Simulation
  56. Ekanayaka Virama, Hürkamp André (2023-03)
    Implementation of a Surrogate-Model for a Novel Path‐Based Finite-Element-Simulation for Additive Manufacturing-Processes in Construction
  57. Tahmasebinia Faham, Jabbari Amir, Skrzypkowski Krzysztof (2023-03)
    The Application of Finite Element Simulation and 3D Printing in Structural Design Within Construction Industry 4.0
  58. Ding Tao, Wang Ziyue, Liu Haoran, Xiao Jianzhuang (2023-03)
    Simulation on Pull-Out Performance of Steel-Bar from 3D Printed Concrete
  59. Khalili Tari Mohammadreza, Reza Faraji Amir, Aslani Alireza, Zahedi Rahim (2023-01)
    Energy Simulation and Life Cycle Assessment of a 3D Printable Building
  60. Nguyen Vuong, Li Shuai, Liu Junli, Nguyen Kien et al. (2022-11)
    Modelling of 3D Concrete Printing Process:
    A Perspective on Material and Structural Simulations
  61. Khan Shoukat, Koç Muammer (2022-10)
    Numerical Modelling and Simulation for Extrusion-Based 3D Concrete Printing:
    The Underlying Physics, Potential, and Challenges
  62. Ren Chuangnan, Gao Baobin, Geng Chenhui, Zhu Wenjie (2022-09)
    Assembled Design and Compressive Performance Simulation of Mine Waterproof Wall Based on Concrete 3D Printing
  63. Chang Ze, Zhang Hongzhi, Liang Minfei, Schlangen Erik et al. (2022-07)
    Numerical Simulation of Elastic Buckling in 3D Concrete Printing Using the Lattice-Model with Geometric Non-Linearity
  64. Briels David, Kollmannsberger Stefan, Leithner Felicitas, Matthäus Carla et al. (2022-07)
    Thermal Optimization of Additively Manufactured Lightweight Concrete Wall Elements with Internal Cellular Structure through Simulations and Measurements
  65. Krenzer Knut, Palzer Ulrich, Müller Steffen, Mechtcherine Viktor (2022-06)
    Simulation of 3D Concrete Printing Using Discrete Element Method
  66. Saruhan Vedat, Keskinateş Muhammer, Felekoğlu Kamile, Felekoğlu Burak (2022-05)
    Effect of Fiber-Reinforcement on Extrudability and Buildability of Mineral-Additive-Modified Portland-Cement Mortars:
    A Rheometer-Based Simulation-Analysis
  67. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
    Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method
  68. Tavangar Tooran, Hosseinpoor Masoud, Yahia Ammar, Khayat Kamal (2021-12)
    Novel Tri-Viscous-Model to Simulate Pumping of Flowable Concrete Through Characterization of Lubrication-Layer and Plug-Zones
  69. Ramyar Elham, Cusatis Gianluca (2021-11)
    Discrete Fresh Concrete-Model for Simulation of Ordinary, Self-Consolidating, and Printable Concrete-Flow
  70. Spangenberg Jon, Silva Wilson, Comminal Raphaël, Mollah Md. et al. (2021-10)
    Numerical Simulation of Multi-Layer 3D Concrete Printing
  71. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2021-09)
    Particle-Finite-Element-Simulation of Extrusion-Processes of Fresh Concrete During 3D Concrete Printing
  72. Choi Se-Jin, Kim Ji-Hwan, Jeong Hyojin, Lee Ja-Sung et al. (2021-08)
    Simulated and Experimental Investigation of the Mechanical Properties and Solubility of 3D Printed Capsules for Self-Healing Cement Composites
  73. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-07)
    Mechanical Characterisation for Numerical Simulation of Extrusion-Based 3D Concrete Printing
  74. Perrot Arnaud, Pierre Alexandre, Nerella Venkatesh, Wolfs Robert et al. (2021-07)
    From Analytical Methods to Numerical Simulations:
    A Process Engineering Toolbox for 3D Concrete Printing
  75. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom et al. (2021-06)
    Numerical Simulation for 3D Printed Wall Structure During the Process of Printing Considering Uncertainty
  76. Ramyar Elham, Xinwei Z., Cusatis Gianluca (2021-04)
    Numerical Simulation of 3D Printing of Infrastructure Materials
  77. Breseghello Luca, Sanin Sandro, Naboni Roberto (2021-04)
    Tool-Path Simulation, Design and Manipulation in Robotic 3D Concrete Printing
  78. Ooms Ticho, Vantyghem Gieljan, Coile Ruben, Corte Wouter (2020-12)
    A Parametric Modelling-Strategy for the Numerical Simulation of 3D Concrete Printing with Complex Geometries
  79. Vantyghem Gieljan, Ooms Ticho, Corte Wouter (2020-11)
    VoxelPrint:
    A Grasshopper Plug-In for Voxel-Based Numerical Simulation of Concrete Printing
  80. Mahadevan Meera, Francis Ann, Thomas Albert (2020-08)
    A Simulation-Based Investigation of Sustainability Aspects of 3D Printed Structures
  81. Chang Ze, Schlangen Erik, Šavija Branko (2020-07)
    Extended-Lattice-Model to Simulate the Printing-Process of 3D Printed Cementitious Materials
  82. Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2020-07)
    Characterizing Extrudability for 3D Concrete Printing Using Discrete Element Simulations
  83. Roussel Nicolas, Spangenberg Jon, Wallevik Jon, Wolfs Robert (2020-06)
    Numerical Simulations of Concrete Processing:
    From Standard Formative Casting to Additive Manufacturing
  84. Liu Zhixin, Li Mingyang, Tay Yi, Weng Yiwei et al. (2020-04)
    Rotation-Nozzle and Numerical Simulation of Mass-Distribution at Corners in 3D Cementitious Material-Printing
  85. Comminal Raphaël, Serdeczny Marcin, Pedersen David, Spangenberg Jon (2019-06)
    Motion-Planning and Numerical Simulation of Material-Deposition at Corners in Extrusion Additive Manufacturing
  86. Serdeczny Marcin, Comminal Raphaël, Pedersen David, Spangenberg Jon (2019-05)
    Numerical Simulations of the Mesostructure Formation in Material-Extrusion Additive Manufacturing
  87. Reinold Janis, Meschke Günther (2018-10)
    Particle-Finite-Element-Simulation of Fresh Concrete for 3D Printing Applications
  88. Yang Pu, Nair Sooraj, Neithalath Narayanan (2018-09)
    Discrete Element Simulations of Rheological Response of Cementitious Binders as Applied to 3D Printing
  89. Mechtcherine Viktor, Gram Annika, Krenzer Knut, Schwabe Jörg-Henry et al. (2014-03)
    Simulation of Fresh Concrete Flow Using Discrete Element Method (DEM)
  90. Khoshnevis Behrokh, Carlson Anders, Leach Neil, Thangavelu Madhu (2012-04)
    Contour Crafting Simulation-Plan for Lunar Settlement Infrastructure Build-Up