#characteristic¶

Keywords by Co - Occurrence¶

#print (122) #concrete (86) #cement (55) #material (34) #mortar (29)

1. Brunner Kim, Kostner Julia, Weger Daniel, Stengel Thorsten et al. (2026-03)
   Durability of Additively Manufactured SPI Components:
   Influence of Layer-Related Microstructural Characteristics
2. Amjad Umar, Irshidat Mohammad, Maurya Muni, Rizmin Khadeejath et al. (2026-03)
   Sustainable 3D Mortar Printing:
   Material Optimization and Ultrasonic Characterization for Enhanced Construction Performance
3. Chen Chi, Wang Shenglin, Li Xiaoyuan, Yang Dengwei (2026-03)
   Recent Progress and Methodology for the Characterization of Layer-Effects of Extrusion-Based 3D-Printed Concrete
4. Kim J.-S., Yoo C., Yang Y. (2026-03)
   Microstructural Characterization and Bonding Performance Evaluation of 3D-Printed Concrete-Mortar Composites
5. Zhu Wenxuan, Zhang Yu, Zhang Yunsheng, Liu Chao et al. (2026-02)
   Multiscale Investigation of Manufactured Sand Characteristics on 3D Printed Concrete Performance:
   Particle Morphology and Stone Powder Effects
6. Zhang Tong, Wei Jinhui, Chen Meng, Yu Kanghao (2026-02)
   Experimental Characterization and Theoretical Modeling of the Bonding Behavior Between FRP Bars and 3D Printed Strain-Hardening Cementitious Composites
7. Liu Chao, Ma Ruiyang, Liu Huawei, Dai Meiling et al. (2026-02)
   Shrinkage in Concrete Additive Manufacturing:
   A Critical Review of Mechanisms, Characterization, and Control Strategies
8. Patel Aniket, Santhanam Manu (2026-01)
   Rheological and Fresh-State Characterization for 3D-Printable Concrete:
   Evaluating Printability Across Different Binder Systems
9. Robens-Radermacher Annika, Schmidt Wolfram, Unger Jörg, Mezhov Alexander (2026-01)
   Characterization of Temperature Influence on the Structural Build-Up of 3D Printed Concrete
10. Alessandro Antonella, Sousa Israel, Ubertini Filippo (2026-01)
    Sensitive Concretes for 3D Printed Structures:
    First Physical and Electromechanical Characterization
11. Wang Xiangyu, Wang Sizhe, Deng North, Liu Zhenbang et al. (2026-01)
    Robotic Rebar Insertion and Grouting for Reinforcement of 3D Printed Concrete:
    Technique Development and Bond Behavior Characterization
12. Pal Biswajit, Chourasia Ajay, Tomar Milan, Pradeep Kumar (2026-01)
    Influence of Interfilament Bond Characteristics on the Load–Deflection Behavior of 3D Printed Beam:
    A Numerical Study
13. Deetman Arjen, Suiker Akke (2025-12)
    Characterization of Early-Age Elastic–Plastic Properties of 3D Printed Materials Using Indentation Testing
14. Iqbal Imtiaz, Inqiad Waleed, Kasim Tala, Besklubova Svetlana et al. (2025-12)
    Strength Characterisation of Fly Ash Blended 3D Printed Concrete Enhanced with Explainable Machine Learning
15. Cheng Jianhua, Chen Meng, Ge Yulin, Zhang Tong (2025-12)
    Mechanical Behavior and Damage Evolution of 3D-Printed Engineered Cementitious Composites at Elevated Temperatures:
    Insights from Acoustic Emission Characterization
16. Cai Xianhuan, Chen Fan, Zhao Zhihui, Xiao Peng et al. (2025-12)
    Impact of Early Particle Characteristics on Rheology and Buildability in 3D-Printed Magnesium Silicon Potassium Phosphate Cement Incorporating Fly Ash
17. Guerrero Ana, Asensio Eloy, Fernández Fernando (2025-12)
    Large‐Format Additive Manufacturing with Cement and Clays:
    Characterization Methods
18. Soshinskiy Olexander, Rashkevich Nina, Shakhov Stanislav, Melnychenko Andrii (2025-11)
    Formulating a Calculation Methodology for Assessing the Strength Characteristics of Building Structures Constructed with a Construction 3D Printer
19. Thib Raghed, Rémond Sébastien, Belayachi Naima, Rémond Elise et al. (2025-11)
    3D Printable Eco-Efficient Mortars Under Salt Water:
    Mix Design and Characterization
20. Wang Hailong, Song Xinlei, Shen Wenbin, Sun Xiaoyan et al. (2025-10)
    Evaluation and Optimization of 3D-Printed Concrete Based on Flowability Considering Printability and Micro-Pore Characteristics
21. Marrero-Rosa Raul, Gomaa Shady, Irizarry Elmer, Ahmed Hassan et al. (2025-10)
    Additive Manufacturing of Ultra-High-Performance Concrete:
    From Mechanical Characterization to Large-Scale Application
22. Gu Yucun, Han Seongho, Khayat Kamal (2025-10)
    Effect of Absorption Kinetics of Superabsorbent Polymer on 3D Printing Characteristics
23. Paritala Spandana, Raj Shubham, Singh Prashant, Subramaniam Kolluru (2025-09)
    Designing 3D Printable Concrete by Integrating the Influence of Aggregate Characteristics
24. Sun Hou-Qi, Zeng Jun-Jie, Xie Shan-Shan, Xia Jun-Run et al. (2025-09)
    Mechanical and Microstructural Characterization of Interlayer Bonding in Multi-Material 3D-Printed Concrete
25. Sabouni Reem, Martini Samer (2025-09)
    Characterization of 3D Printed Concrete Mixtures Developed Using Local UAE Materials Based on Rheological Properties
26. Yang Shuai, Li Fei, Lu Ya, Xu Xiaoming et al. (2025-08)
    Study of the Printing Characteristics of a 3D Printing Solution for the Purpose of Process Optimization
27. Divya M., Riza S., Shariff Najeeb (2025-06)
    Characterization of Cold Joint Formation in Digitally Printed Mortar During the Dormant Phase:
    A Time-Dependent Study
28. Lyu Xin, Ayough Pouria, Nawaz Waleed, Elchalakani Mohamed (2025-06)
    Development and Characterization of Printable Rubberised Ultra-High-Performance Concrete
29. Kandagaddala Revanth, Boddepalli Uday, Nanthagopalan Prakash (2025-05)
    Novel Rheological Test Procedure for Printability Characterization of 3D Printable Mortar
30. Das B., Prathap Y., Sandeep Ankit, Vaghamshi Keval et al. (2025-05)
    Reviewing the Materials Selection, Rheology, Durability, and Microstructural Characteristics of 3D Printed Concrete
31. Chen Meng, Cheng Jianhua, Zhang Tong, Wang Yuting (2025-03)
    Experimental Characterization and Constitutive Modelling of the Anisotropic Dynamic Compressive Behavior of 3D Printed Engineered Cementitious Composites
32. Bayat Hamid, Karimpouli Sagegh, Yang Liming, Ramandi Hamed et al. (2025-02)
    Investigation of Interlayer Bonding and Pore Characteristics in 3D-Printed High-Strength Mortar Incorporating Recycled Lightweight Aggregates
33. Chourasia Ajay, Pal Biswajit, Kapoor Ashish (2025-02)
    Influence of Printing Direction and Interlayer Printing Time on the Bond Characteristics and Hardened Mechanical Properties of Agro-Industrial Waste-Based 3D Printed Concrete
34. Chen Wei, Guan Yongying, Zhu Binrong, Han Jinsheng et al. (2025-01)
    Influence of Extruded Strip-Shape and Dimension on the Mechanical Properties and Pore-Characteristics of 3D Printed Geopolymer Concrete
35. Wang Yibo, Yan Ming, Yang Kun, Ao Chenyang et al. (2025-01)
    Effect of Wall-Slip on the Extrusion-Characteristics of 3D Printing of Cementitious Materials
36. Oulkhir Fatima, Rihani Nadir, Akhrif Iatimad, Jai Mostapha (2025-01)
    Integration of Earth-Based Materials in 3D Concrete Printing:
    Physico-Chemical and Technological Characterization
37. Li Yeou-Fong, Liang Yu-Fang, Syu Jin-Yuan, Huang Chi-Hong et al. (2024-12)
    Static and Dynamic Mechanical Characteristics of 3D Printed Anisotropic Basalt Fiber-Reinforced Cement Mortar
38. Han Xiaoyu, Yan Jiachuan, Huo Yanlin, Chen Tiefeng (2024-11)
    Effect of Carbonation-Curing-Regime on 3D Printed Concrete:
    Compressive Strength, CO2 Uptake, and Characterization
39. Rothe Tom, Gantner Stefan, Hack Norman, Hühne Christian (2024-11)
    Characterisation of the Alkaline-Resistance of Fiber-Reinforcement Strands Produced in a Dynamic Fiber Winding Process for 3D Concrete Printing
40. Wang Li, Lin Wenyu, Wan Qian, Li Zhijian et al. (2024-11)
    Manufacturing Accuracy Improvement of Concrete Product by Hybrid Additive-Subtractive Method Based on the Time-Dependent Characteristics of Cementitious Materials
41. Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
    Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
42. Immelman Jandré, Pourbehi Mohammad, Ameh Alechine, Katambwe Vinny et al. (2024-11)
    Characterisation and Formulation of Waste Augmented 3D Printable Concrete for BIM-Based Automation
43. Zhao Wanting, Zhao Yu, Zhu Lingli, Guan Xuemao (2024-10)
    Preparation of 3D Printed Concrete from Solid Waste:
    Study of the Relationship Between Steel-Slag Characteristics and Early Performance in 3D Printing
44. Chen Yuning, Xia Kailun, Dong Enlai, Cao Ruilin et al. (2024-10)
    A Mechanical Characteristic Capture-Method Considering Printing-Configurations for Buildability-Modeling in Concrete 3D Printing
45. Edmund Dineth, Zahra Tatheer, Asad Mohammad, Thamboo Julian (2024-09)
    Experimental Investigation on Tensile-Characteristics of 3D Printed Auxetic-Embedded Cementitious Composites and Shear-Bonding Behavior to Masonry
46. Ahmed Ahmed, Rosa Raul, Gomaa Shady, Irizarry Elmer et al. (2024-09)
    Rheological Characterization of Nano-Modified Ultra-High-Performance Concrete for 3D Printing
47. Tudela Marcell, Cardenas Palomino Kelssy, Bienvenu Sophie, Dunkelberg Federico et al. (2024-09)
    Development and Characterization of a Printable Concrete Made with Construction and Demolition-Waste-Aggregates
48. Szögi Tamás, Kapitány Kristóf, Sólyom Sándor (2024-09)
    Characterization of 3D Concrete Printed Horizontal Structures Through Early-Age Deformation-Analysis
49. Rudolph Jennifer, Lowke Dirk (2024-09)
    Design and Characterisation of a Two-Component Mortar-System for Shotcrete 3D Printing:
    An Approach to the Targeted Control of Material-Properties
50. Zargayouna Habib, Paquet Elodie, Mabrouki Tarek, Hamdi Essaieb et al. (2024-09)
    Analysis of the Effect of Substituting Cement with Marble-Powder on the Mortar Characteristics Used in 3D Printing
51. Kul Anil, Kocaer Öznur, Lucas Sandra (2024-09)
    Anisotropic Characteristics of 3D Printed Geopolymer Mortars from End-of-Life Materials of Construction Industry
52. Reißig Silvia, Herdan Annika, Mechtcherine Viktor (2024-09)
    Characterisation of the Rheological Behavior of a Resource-Saving Sustainable Concrete in the Context of 3D Printing
53. Viano Rafaël, Margerit Pierre, Mesnil Romain, Weisz-Patrault Daniel et al. (2024-09)
    Shrinkage Characterization and Compensation for 3DPC
54. Oliveira Romano Roberto, Lima Francisco, Mesquita José, Pan Eduardo et al. (2024-09)
    Extended Rheological Characterization as a Tool for Low-Binder 3D Printing Compositions
55. Irizarry Elmer, Gomaa Shady, Rosa Raul, Ahmed Ayesha et al. (2024-09)
    Mechanical Characterization of 3D Printed Ultra-High-Performance Concrete
56. Brunner Kim, Tandon Kai, Stengel Thorsten (2024-09)
    Hydration Characteristics of 3D Particle-Bed Printed Cementitious Specimens
57. Yang Rijiao, Xu Chengji, Lan Yan, Qiu Yue et al. (2024-08)
    Near Pixel-Level Characterisation of Micro-Fibers in 3D Printed Cementitious Composites and Migration Mechanisms Using a Novel Iterative Method
58. Glotz Theresa, Petryna Yuri (2024-08)
    Experimental Characterization of Anisotropic Mechanical Behavior and Failure-Mechanisms of Hardened Printed Concrete
59. Jiang Shangjin, Wang Yuntao, Hua Sudong, Yue Hongfei et al. (2024-08)
    Preparation and Performance Characterization of Low-Density 3D Printed Expanded Perlite-Foam-Concrete
60. Liu Chao, Zhang Zedi, Jia Zijian, Cao Ruilin et al. (2024-07)
    Quantitative Characterization of Bubble-Stability of Foam-Concrete Throughout Extrusion-Process:
    From Yield-Stress , Viscosity and Surface Tension Point of View
61. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2024-07)
    Impact of Water to Solids Ratio on Stability, Printability, and Mechanical Characteristics of 3D Printable Foam-Concrete
62. Gu Yucun, Khayat Kamal (2024-06)
    Effect of Superabsorbent Polymer on 3D Printing Characteristics as Rheology-Modified-Agent
63. Wang Changqing, Du Zicheng, Zhang Yu, Ma Zhiming (2024-06)
    Elaborating the 3D Microstructural Characteristics and Strength Softening Mechanical Mechanism of Fiber-Reinforced Recycled Aggregate Concrete
64. Konoplianyk Alexander, Sopilnyak Artem, Sirenok Kyrylo, Sereda Svitlana et al. (2024-06)
    Constituent Components of 3D Printing in Construction:
    Mixture, Reinforcement and Their Main Characteristics
65. Dong Liang, Yang Yekai, Liu Zhongxian, Zhang Yan et al. (2024-06)
    Interface Bonding Characteristics of 3D Printed Ultra-High-Performance Concrete After Elevated Temperatures
66. Basha Shaik, Nugraha Joshua, Rehman Atta, Choi Kichang et al. (2024-06)
    Structuration and Yield Strength Characterization of Hybrid Alkali-Activated Cement Composites for Ultra-Rapid 3D Construction Printing
67. Mathew Ashitta, Philip Nivin, Jędrzejewska Agnieszka (2024-05)
    Enhancing Sustainability and Performance of 3D Printing Mortar with Alccofine 1203, GGBS, and Kaolin:
    Experimental Investigation and Mechanical Characterization
68. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2024-05)
    Evaluating Clay Characteristics for Printable Geo-Materials:
    A Case Study of Clay-Sand Mixes
69. Shoaei Parham, Kjøniksen Anna-Lena, Pamies Ramón, Pilehvar Shima (2024-05)
    Characterization of 3D Printable Geopolymer Mortars:
    Effect of Binder Composition and Basalt-Fiber-Reinforcement
70. Sun Jiapan, Fan Bingbing, Li Bin, Zhang Yimeng (2024-04)
    A Study of Viability and Characteristic of 3D Printable Mortar with Yellow River Sand
71. Youssef Passant, Feky Muhammad, Ragab Ahmed, Serag Mohamed (2024-04)
    Characterization of Geopolymer Composites for 3D Printing:
    A Microstructure Approach
72. Vallurupalli Kavya, Libre Nicolas, Khayat Kamal (2024-04)
    Characterization of Extrudability Using Rheology and Desorptivity
73. Shi Yifan, Jia Lutao, Jia Zijian, Ma Lei et al. (2024-03)
    Early-Age Inhomogeneous Deformation of 3D Printed Concrete:
    Characteristics and Influences of Superplasticizer and Water-Binder Ratio
74. Vigneshwari Are, Jayaprakash Jaganathan (2024-02)
    A Review on 3D Printable Cementitious Material Containing Copper and Iron-Ore-Tailings:
    Material-Characterization, Activation-Methods, Engineering-Properties, Durability, and Microstructure-Behavior
75. Silva Guido, Quispe Axcel, Baldoceda Jordan, Kim Suyeon et al. (2024-02)
    Additive Construction of Concrete Deep Beams Using Low-Cost Characterization Methods and FEM-Based Topological Optimization
76. Pavlin Majda, Horvat Barbara, Cerc Korošec Romana, Capuder Rok et al. (2024-01)
    Characterisation of a 3D Printed Alkali-Activated Material Based on Waste-Mineral-Wool at Room and Elevated Temperatures
77. Xiao Jianzhuang, Bai Meiyan, Wu Yuching, Duan Zhenhua et al. (2024-01)
    Inter-Layer Bonding Strength and Pore Characteristics of 3D Printed Engineered Cementitious Composites
78. Tao Yaxin, Zhang Yi, Wang Xiaoyun, Godinho Jose et al. (2024-01)
    Adhesion Evaluation and Interface Characterization of 3D Printed Concrete for Automatic Repair
79. Zhu Ronghua, Egbe King-James, Salehi Hadi, Shi Zhongtian et al. (2024-01)
    Eco-Friendly 3D Printed Concrete with Fine Aggregate Replacements:
    Fabrication, Characterization and Machine Learning Prediction
80. Christ Julian, Perrot Arnaud, Ottosen Lisbeth, Koss Holger (2023-12)
    Rheological Characterization of Temperature-Sensitive Biopolymer-Bound 3D Printing Concrete
81. Põldaru Mattias, Tammkõrv Karl, Tusik Tanel, Kiviste Mihkel et al. (2023-11)
    The Effect of Printing-Direction on the Strength Characteristics of a 3D Printed Concrete Wall-Section
82. Liu Huawei, Liu Chao, Zhang Yamei, Bai Guoliang (2023-11)
    Bonding Properties Between 3D Printed Coarse Aggregate Concrete and Rebar Based on Interface Structural Characteristics
83. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-11)
    Slag-Modified Metakaolin-Based 3D Printed Geopolymer:
    Mechanical Characterisation, Microstructural Properties, and Nitrogen Physisorption Pore-Analysis
84. Chernysheva Natalia, Shatalova Svetlana, Lesovik Valeriy, Kozlov Pavel (2023-11)
    Deformation Characteristics of Dense and Foamed Mortars Based on Cement and Gypsum-to-Cement Binders for 3D Printing
85. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-10)
    Comparative Studies of LC³- and Fly-Ash-Based Blended Binders in Fiber-Reinforced Printed Concrete:
    Rheological and Quasi-Static Mechanical Characteristics
86. Cuevas Villalobos Karla, Weinhold Joachim, Stephan Dietmar, Kim Ji-Su (2023-09)
    Effect of Printing-Patterns on Pore-Related Microstructural Characteristics and Properties of Materials for 3D Concrete Printing Using In-Situ and Ex-Situ Imaging-Techniques
87. Ingle Vaibhav, Prem Prabhat, Ramamurthy Vignesh, Ravichandran Darssni (2023-09)
    Acoustic Emission Characterization of 3D Printed Ultra-High-Performance Concrete Beams Under Bending
88. Ramamurthy Vignesh, Prem Prabhat, Ingle Vaibhav, Giridhar Greeshma (2023-09)
    Fracture Characterization of 3D Printed Ultra-High-Performance Fiber Concrete Beams Using Acoustic Emission
89. Ji Xuping, Pan Tinghong, Liu Xingyao, Zhao Wenhao et al. (2023-09)
    Characterization of Thixotropic Properties of Fresh Cement‐Based Materials
90. Ospina Salazar Ana, Valencia Isaza Andrés, Restrepo Montoya José, Mejía Arcila Johanna et al. (2023-09)
    Upcycling Fly-Ash, Red-Clay-Brick Waste, and Paper-Sludge as Feedstock for Manufacturing a Lightweight Extruded Composite:
    Design and Characterization
91. Xie Xiangyu, Liu Xuemei, Ding Faxing, Zhang Lihai (2023-08)
    Characteristics and Mechanism of the Particle-Migration Subject to the Shear Flow of Concrete Flow Under Pressure
92. Wang Yang, Qiu Liu-Chao, Hu Yan-Ye, Cheng Song-Gui et al. (2023-08)
    Influential Factors on Mechanical Properties and Microscopic Characteristics of Underwater 3D Printing Concrete
93. Pessoa Ana Sofia, Jesus Manuel, Guimarães Ana, Lucas Sandra et al. (2023-07)
    Experimental Characterisation of Hygrothermal Properties of a 3D Printed Cementitious Mortar
94. Varela Hugo, Barluenga Gonzalo, Sonebi Mohammed (2023-07)
    Rheology Characterization of 3D Printing Mortars with Nano-Clays and Basalt-Fibers
95. Arrêteau Manon, Fabien Aurélie, Haddaji Badreddine, Chateigner Daniel et al. (2023-07)
    Review of Advances in 3D Printing Technology of Cementitious Materials:
    Key Printing Parameters and Properties Characterization
96. Riaz Raja, Usman Muhammad, Ali Ammar, Majid Usama et al. (2023-06)
    Inclusive Characterization of 3D Printed Concrete in Additive Manufacturing:
    A Detailed Review
97. Najvani Mohammad, Murcia Daniel, Soliman Eslam, Taha Mahmoud (2023-06)
    Early-Age Strength and Failure Characteristics of 3D Printable Polymer Concrete
98. Shenawa Amaal, Karoti Poonam (2023-06)
    3D Printing in Construction, Mixture Characteristics, Strength, and Thermal Performance-Review
99. Deng Qi, Zou Shuai, Xi Yonghui, Singh Amardeep (2023-06)
    Development and Characteristic of 3D Printable Mortar with Waste-Glass-Powder
100. Antoni Antoni, Adi N., Kurniawan M., Agraputra A. et al. (2023-06)
     The Influence of Viscosity-Modifying Agent and Calcium-Carbonate on 3D Printing Mortar Characteristics
101. Dijkers Hugo, Simon George, Bos Freek, Salet Theo et al. (2023-05)
     Material-Characteristics of 3D Printed Concrete Subjected to Highly Dynamic Loading
102. Mohan Manu, Rahul Attupurathu, Stappen Jeroen, Cnudde Veerle et al. (2023-05)
     Assessment of Pore-Structure Characteristics and Tortuosity of 3D Printed Concrete Using Mercury-Intrusion-Porosimetry and X-Ray Tomography
103. Simedru Alexandru, Becze Anca, Cadar Oana, Scurtu Daniela et al. (2023-04)
     Structural Characterization of Several Cement-Based Materials Containing Chemical Additives with Potential Application in Additive Manufacturing
104. Jaji Mustapha, Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-04)
     Thixotropic Characterisation of Slag-Modified 3D Printable Metakaolin-Based Geopolymer Composite
105. Kilic Ugur, Ma Ji, Baharlou Ehsan, Ozbulut Osman (2023-03)
     Effects of Viscosity-Modifying Admixture and Nano-Clay on Fresh and Rheo-Viscoelastic Properties and Printability Characteristics of Cementitious Composites
106. Luo Surong, Lin Qian, Xu Wei, Wang Dehui (2023-03)
     Effects of Interval Time and Interfacial Agents on the Mechanical Characteristics of Ultra-High-Toughness Cementitious Composites Under 3D Printed Technology
107. Giwa Ilerioluwa, Game Daniel, Ahmed Hassan, Noorvand Hassan et al. (2023-02)
     Performance and Macrostructural Characterization of 3D Printed Steel-Fiber-Reinforced Cementitious Materials
108. Taleb Maria, Bulteel David, Betrancourt Damien, Roudet Francine et al. (2023-01)
     Multi-Scale Mechanical Characterization of the Interface in 3D Printed Concrete
109. Malipeddi Reshma, Adiseshu S. (2023-01)
     Impact of Unique Mixing Methodology on Macro and Microstructural Characteristics of Concrete Containing Slag and Fly-Ash
110. Kosson Michael, Brown Lesa, Sanchez Florence (2023-01)
     Nano-Mechanical Characterization of 3D Printed Cement-Pastes
111. Ahmed Ghafur (2023-01)
     A Review of 3D Concrete Printing:
     Materials and Process Characterization, Economic Considerations and Environmental Sustainability
112. Li Zhengrong, Xing Wenjing, Sun Jingting, Feng Xiwen (2022-12)
     Multi-Scale Structural Characteristics and Heat-Moisture Properties of 3D Printed Building Walls:
     A Review
113. Boddepalli Uday, Gandhi Indu, Panda Biranchi (2022-12)
     Stability of Three-Dimensional Printable Foam-Concrete as Function of Surfactant Characteristics
114. Arunothayan Arun, Nematollahi Behzad, Khayat Kamal, Ramesh Akilesh et al. (2022-11)
     Rheological Characterization of Ultra-High-Performance Concrete for 3D Printing
115. Yue J., Beskos Dimitrios, Feng C., Wu Kai (2022-11)
     Hardened Fracture Characteristics of Printed Concrete Using Acoustic Emission Monitoring Technique
116. Diwan Anushree, Patel Shiv, Pal Ankit, Dwivedi Ashutosh et al. (2022-10)
     Flow Characteristics of Cement Mortar with Varied Silica-Fume for Additive Construction
117. Wu Yun-Chen, Li Mo (2022-09)
     Effects of Early-Age Rheology and Printing Time Interval on Late-Age Fracture Characteristics of 3D Printed Concrete
118. Engelhard Michael, Kalytta-Mewesand Andreas, Volkmer Dirk (2022-09)
     Testing Methods for Deformation Characterization on 3D Printed Carbon Fiber-Reinforced Cementitious Composites
119. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2022-09)
     Rheological and Strength-Characterisation of Limestone-Calcined-Clay-Cement 3D Printed Concrete
120. Shkundalova Olena, Molkens Tom, Claßen Martin, Rossi Barbara (2022-09)
     Characterization of 3D Printed Concrete Beams After Exposure to High Temperature
121. Zhou Wen, McGee Wesley, Zhu He, Gökçe H. et al. (2022-08)
     Time-Dependent Fresh Properties Characterization of 3D Printing Engineered Cementitious Composites:
     On the Evaluation of Buildability
122. Sikora Paweł, Techman Mateusz, Federowicz Karol, Khayatt Ahmed et al. (2022-07)
     Insight into the Microstructural and Durability Characteristics of 3D Printed Concrete:
     Cast versus Printed Specimens
123. Yu Shiwei, Sanjayan Jay, Du Hongjian (2022-07)
     Effects of Cement Mortar Characteristics on Aggregate-Bed 3D Concrete Printing
124. Ahmed Ghafur, Askandar Nasih, Jumaa Ghazi (2022-07)
     A Review of Large-Scale 3DCP:
     Material-Characteristics, Mix-Design, Printing-Process, and Reinforcement-Strategies
125. Dulaj Albanela, Suijs Monica, Salet Theo, Lucas Sandra (2022-06)
     Incorporation and Characterization of Multi-Walled Carbon Nanotube Concrete Composites for 3D Printing Applications
126. Hynek Estelle, Bulteel David, Urquizar Antoine, Rémond Sébastien (2022-06)
     Formulation and Characterization of a Low-Carbon Impact Cementitious Ink for 3D Printing
127. Nishijo Keisuke, Ohno Motohiro, Ishida Tetsuya (2022-06)
     Development of Cementitious Metamaterial with Compressive Strain-Hardening Characteristics
128. Galeote Eduardo, Egea Carlos, Fuente Albert (2022-06)
     Characterisation and Modelling of a 3D Concrete Printed Wall under Flexure
129. Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
     Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
     A Review
130. Elistratkin Michail, Alfimova Nataliya, Podgorniy Daniil, Olisov Andrey et al. (2022-05)
     Influence of Equipment Operation Parameters on the Characteristics of a Track Produced with Construction 3D Printing
131. Peerzada Abdul, Rangaraju Prasad, Roberts James, Biehl Adam (2022-03)
     Influence of External Vibration on the Gravitational Flow Characteristics of Cementitious Materials:
     A Perspective from Application in Additive Manufacturing
132. Yang Yekai, Wu Chengqing, Liu Zhongxian, Li Jun et al. (2022-02)
     Characteristics of 3D Printing Ultra-High-Performance Fiber-Reinforced Concrete Under Impact Loading
133. Tavangar Tooran, Hosseinpoor Masoud, Yahia Ammar, Khayat Kamal (2021-12)
     Novel Tri-Viscous-Model to Simulate Pumping of Flowable Concrete Through Characterization of Lubrication-Layer and Plug-Zones
134. Kilic Ugur, Yang Yang, Ma Ji, Ozbulut Osman (2021-12)
     Rheological and Thermal Characterization of 3D Printable Lightweight Cementitious Composites with Fly-Ash-Cenospheres
135. Napolitano Rosanna, Forni Daniele, Menna Costantino, Asprone Domenico et al. (2021-11)
     Dynamic Characterization of the Layer-Interface Properties of 3D Printed Concrete Elements
136. Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
     A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing
137. Murcia Heras, Abdellatef Mohammed, Genedy Moneeb, Taha Mahmoud (2021-11)
     Rheological Characterization of Three-Dimensional-Printed Polymer Concrete
138. Nair Sooraj, Neithalath Narayanan (2021-11)
     Flow Characterization of Three-Dimensional Printable Cementitious Pastes During Extrusion Using Capillary-Rheometry
139. Rodriguez Fabian, Olek Jan, Moini Mohamadreza, Zavattieri Pablo et al. (2021-11)
     Linking Solids Content and Flow Properties of Mortars to Their Three-Dimensional Printing Characteristics
140. Jacquet Yohan, Picandet Vincent, Perrot Arnaud (2021-11)
     Characterization of Tensile Behavior of Fresh Cementitious Materials
141. Esposito Laura, Casagrande Lorenzo, Menna Costantino, Asprone Domenico et al. (2021-10)
     Early-Age Creep Behavior of 3D Printable Mortars:
     Experimental Characterisation and Analytical Modelling
142. Mo Yixin, Yue Songlin, Zhou Qizhen, Feng Bowei et al. (2021-09)
     Dynamic Properties and Fractal Characteristics of 3D Printed Cement Mortar in SHPB-Test
143. Nodehi Mehrab, Asiabanpour Bahram, Omer Liam, Ozbakkaloglu Togay (2021-08)
     Material-Characterization of Diversity Aggregated Cementitious Materials Produced with a Modular Lightweight Additive Manufacturing Extrusion-System
144. Rehman Atta, Kim Jung-Hoon (2021-07)
     3D Concrete Printing:
     A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
145. Yu Shiwei, Xia Ming, Sanjayan Jay, Yang Lin et al. (2021-07)
     Microstructural Characterization of 3D Printed Concrete
146. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-07)
     Mechanical Characterisation for Numerical Simulation of Extrusion-Based 3D Concrete Printing
147. Nair Sooraj, Panda Subhashree, Tripathi Avinaya, Neithalath Narayanan (2021-06)
     Relating Print-Velocity and Extrusion-Characteristics of 3D Printable Cementitious Binders:
     Implications Towards Testing Methods
148. Bos Freek, Kruger Jacques, Lucas Sandra, Zijl Gideon (2021-04)
     Juxtaposing Fresh Material-Characterisation-Methods for Buildability-Assessment of 3D Printable Cementitious Mortars
149. Kilic Ugur, Jiang Zhangfan, Ma Ji, Ozbulut Osman (2021-03)
     Printability Characterization of Graphene-Reinforced Cementitious Composites
150. Chen Yu, Çopuroğlu Oğuzhan, Rodríguez Claudia, Filho Fernando et al. (2021-02)
     Characterization of Air-Void Systems in 3D Printed Cementitious Materials Using Optical Image Scanning and X-Ray Computed Tomography
151. Meurer Maximilian, Claßen Martin (2021-02)
     Mechanical Properties of Hardened 3D Printed Concretes and Mortars:
     Development of a Consistent Experimental Characterization-Strategy
152. Mohan Manu, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-01)
     Early-Age Hydration, Rheology and Pumping Characteristics of CSA Cement-Based 3D Printable Concrete
153. Geng Zifan, She Wei, Zuo Wenqiang, Lyu Kai et al. (2020-09)
     Layer-Interface Properties in 3D Printed Concrete:
     Dual Hierarchical Structure and Micromechanical Characterization
154. Casagrande Lorenzo, Esposito Laura, Menna Costantino, Asprone Domenico et al. (2020-07)
     Mechanical Characterization of Cement-Based Mortar Used in 3DCP Including Early-Age Creep Effects
155. Harbouz Ilhame, Rozière Emmanuel, Yahia Ammar, Loukili Ahmed (2020-07)
     Physico-Chemical Characterization at Early-Age of 3D Printed Mortar
156. Sambucci Matteo, Valente Marco, Sibai Abbas, Marini Danilo et al. (2020-07)
     Rubber-Cement Composites for Additive Manufacturing:
     Physical, Mechanical and Thermo-Acoustic Characterization
157. Napolitano Rosanna, Menna Costantino, Asprone Domenico, Giudice Lorenzo (2020-07)
     Mechanical Characterization of Layer-by-Layer Interface in Concrete Elements Obtained by Additive Manufacturing
158. Carneau Paul, Mesnil Romain, Ducoulombier Nicolas, Roussel Nicolas et al. (2020-07)
     Characterisation of the Layer-Pressing-Strategy for Concrete 3D Printing
159. Nair Sooraj, Panda Subhashree, Santhanam Manu, Sant Gaurav et al. (2020-05)
     A Critical Examination of the Influence of Material-Characteristics and Extruder-Geometry on 3D Printing of Cementitious Binders
160. Putten Jolien, Deprez Maxim, Cnudde Veerle, Schutter Geert et al. (2019-09)
     Microstructural Characterization of 3D Printed Cementitious Materials
161. Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2019-08)
     Mechanical Characterization of 3D Printable Concrete
162. Panda Biranchi, Unluer Cise, Tan Ming (2019-08)
     Extrusion and Rheology Characterization of Geopolymer Nanocomposites Used in 3D Printing
163. Lee Hojae, Kim Jang-Ho, Moon Jae-Heum, Kim Won-Woo et al. (2019-08)
     Correlation Between Pore Characteristics and Tensile Bond Strength of Additive Manufactured Mortar Using X-Ray Computed Tomography
164. Kim Kwan, Yeon Jaeheum, Lee Hee (2019-08)
     Strength Development Characteristics of SBR-Modified Cementitious Mixtures for 3D Concrete Printing
165. Alghamdi Hussam, Neithalath Narayanan (2019-07)
     Synthesis and Characterization of 3D Printable Geopolymeric Foams for Thermally Efficient Building Envelope Materials
166. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2019-07)
     An Ab-Inito Approach for Thixotropy Characterisation of Nano-Particle-Infused 3D Printable Concrete
167. Ducoulombier Nicolas (2019-06)
     Characterisation and Modelling of Interfacial-Damage in Fiber-Reinforced Concrete for 3D Printing in Construction
168. Panda Biranchi, Bhagath Singh Gangapatnam, Unluer Cise, Tan Ming (2019-02)
     Synthesis and Characterization of One-Part Geopolymers for Extrusion-Based 3D Concrete Printing
169. Ingaglio Joseph, Fox John, Naito Clay, Bocchini Paolo (2019-02)
     Material-Characteristics of Binder-Jet 3D Printed Hydrated CSA Cement with the Addition of Fine Aggregates
170. Nair Sooraj, Alghamdi Hussam, Arora Aashay, Mehdipour Iman et al. (2019-01)
     Linking Fresh Paste Microstructure, Rheology and Extrusion-Characteristics of Cementitious Binders for 3D Printing
171. Khalil Noura, Rémond Sébastien, Baz Bilal, Aouad Georges (2018-09)
     Characterization of 3D Printing Mortars Made with OPC-CSA Mixes
172. Moini Mohamadreza, Olek Jan, Magee Bryan, Zavattieri Pablo et al. (2018-09)
     Additive Manufacturing and Characterization of Architectured Cement-Based Materials via X-Ray Micro-Computed Tomography
173. Ma Guowei, Zhang Junfei, Wang Li, Li Zhijian et al. (2018-06)
     Mechanical Characterization of 3D Printed Anisotropic Cementitious Material by the Electromechanical Transducer
174. Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
     Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement
175. Tian Wei, Han Nv (2018-04)
     Pore Characteristics (>0.1mm) Of Non-Air-Entrained Concrete Destroyed by Freeze-Thaw-Cycles Based on CT Scanning and 3D Printing
176. Deng Shou-chang, Zhang Xue-bing, Qin Ying-hui, Luo Guan-xiang (2007-02)
     Rheological Characteristic of Cement Clean Paste and Flowing Behavior of Fresh Mixing Concrete with Pumping in Pipeline