Skip to content

#mixing

Keywords by Co - Occurrence

  1. Hechtl Christian, Dahlenburg Maximilian, Bos Freek, Kränkel Thomas et al. (2025-12)
    Adaptive-Binder-Aggregate Mixing (ABAM):
    Concept for Extrusion-Based Multi-Material 3D Concrete Printing
  2. Okangba Stanley, Ngcobo Ntebo, Mahachi Jeffrey (2025-12)
    Bridging Innovation and Governance:
    A UTAUT-Based Mixed-Method Study of 3D Concrete Printing Technology Acceptance in South Africa
  3. Abbas Yassir, Alsaif Abdulaziz (2025-11)
    Explainable Data-Driven Modeling for Optimized Mix Design of 3D-Printed Concrete:
    Interpreting Nonlinear Synergies Among Binder Components and Proportions
  4. Khoury Eliane, Cheikh Khadija, Schutter Geert, Cazacliu Bogdan et al. (2025-11)
    Using Vacuum Mixing for 3D Printing of Mortars Made with Recycled Sand
  5. Manickavasakam Karnan, Huri Mohammed, Kharma Khaled, Hosan Anwar et al. (2025-11)
    Smart 3D-Printed Concrete:
    Recent Advances in Self-Sensing Mix Design and Functional Reinforcements
  6. Song Qiang, Zhou Guangyu, Bao Hailing, Liu Qiong (2025-11)
    Study on the Effects of Nozzle Proximal Carbonation Mixing and Vacuum Dewatering on the Printability and Mechanical Properties of the 3D Printed Construction Mortar
  7. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun et al. (2025-11)
    Examining the Multi-Scale Toughening Mechanisms and Mechanical Anisotropic Behavior of 3D Printed Concrete Reinforced with Calcium Sulfate Whiskers and Mixed Fibers
  8. Thib Raghed, Rémond Sébastien, Belayachi Naima, Rémond Elise et al. (2025-11)
    3D Printable Eco-Efficient Mortars Under Salt Water:
    Mix Design and Characterization
  9. Nair Sajitha, Nagarajan Praveen, Thampi Santosh, Das Sudha et al. (2025-10)
    Life Cycle-Based Sustainability Assessment of Optimized 3D Printable Concrete Mixes Incorporating Scms and Recycled Aggregates
  10. Liu Junli, Zhang Shipeng, Hao Lucen, Wu Bo et al. (2025-10)
    Rapid Rheology Control and Stiffening of 3D-Printed Cement Mortar via CO2 Flash Mixing in a 2K Printing System
  11. Sedighi Saeed, Rahai Alireza, Moodi Faramarz (2025-10)
    Multi-Criteria Optimization for Sustainable Concrete Mix Considering the Synergistic Effect of Recycled Steel Fiber and LC3 Concrete
  12. Xiao Jianzhuang, He Yao, Yu Miao, Wang Changhao et al. (2025-10)
    Effects of Pressurized CO2 Mixing on the Properties of Mortar
  13. Thajeel Marwah, Chalawi Ameen, Balázs György (2025-09)
    Printability and Strength of 3D-Printed Concrete:
    Role of Mix Design and Printing Parameters
  14. Maroszek Marcin, Rudziewicz Magdalena, Hebda Marek (2025-09)
    Recycled Components in 3D Concrete Printing Mixes:
    A Review
  15. Tarhan İsmail, Tarhan Yeşim (2025-09)
    Nonlinear In-Plane Response of 3D-Printed Concrete Walls with Varied Infill Patterns:
    Experimental Mix Design and Numerical Structural Assessment
  16. Mani Aravindhraj, Sekar Muthu (2025-08)
    NDT Techniques for Evaluating Mechanical Properties in Green and Fiber-Reinforced 3D Printable Mixes
  17. Gerges Isabelle, Farraj Faten, Youssef Nicolas, Antczak Emmanuel et al. (2025-07)
    Methodologies to Design Optimum 3D Printable Mortar Mix:
    A Review
  18. Bradshaw James, Si Wen, Khan Mehran, McNally Ciaran (2025-07)
    Emerging Insights into the Durability of 3D-Printed Concrete:
    Recent Advances in Mix Design Parameters and Testing
  19. Dong Wei, Zhang Changmin, Wang Junfeng, Zhang Xinjie et al. (2025-07)
    Optimal Design of Mix Proportions for 3D Printed Concrete with Ferrochrome Slag and Aeolian Sand
  20. Sando Mona, Stephan Dietmar (2025-07)
    Online Monitoring for 3D Printable Geopolymers:
    Automated Slug Test Analysis with Image Analysis Revealing Mixing Sequence Effects
  21. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
    Enhancing the Mix Design in 3D Concrete Printing Through Systematic Optimization Process
  22. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-06)
    Mix Design Optimization of 3D-Printed Cementitious Composites for Marine Applications:
    Impact of Binder Composition, Accelerated Carbonation, and PVA Fibers on Strength and Durability
  23. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John (2025-06)
    Enhancing 3D Printed Concrete Through Waste Fly Ash:
    A Comprehensive Approach to Sustainable and Efficient Mix Design
  24. Galeote Eduardo, Claramunt Josep, Hermida José, Fuente Albert (2025-06)
    Influence of Fibers and Iron Dust on the Electrical Conductivity of 3D-Printed Concrete Mixes
  25. Girskas Giedrius, Kligys Modestas (2025-06)
    3D Concrete Printing Review:
    Equipment, Materials, Mix Design, and Properties
  26. Li Long, Ji Weiyi, Xiao Jianzhuang, Xiao Jie et al. (2025-06)
    Strategy for Improving Buildability of 3D Printing Concrete Using CO2 Mixing and Chemical Admixtures
  27. Hopkins Ben, Si Wen, Khan Mehran, McNally Ciaran (2025-06)
    Recent Advancements in Polypropylene Fiber-Reinforced 3D-Printed Concrete:
    Insights into Mix Ratios, Testing Procedures, and Material Behaviour
  28. Mukhtar Faisal (2025-05)
    3D-Printed Concrete Fracture:
    Effects of Cohesive Laws, Mixes, and Print Parameters in 3D EXtended FEM
  29. Deng Yongjie, Li Nan, Zhong Jianjun, Liang Yun et al. (2025-04)
    Ultrafast-Setting Magnesium Phosphate Cement Prepared from Low-Burned Magnesium Oxide for Mixed Stirring Extrusion Function Integrated 3D Printing Applications
  30. Ali Shah Syed, Zhang Shipeng, Xuan Dongxing, Poon Chi (2025-04)
    Development of a Novel Mixing Strategy for Set-on-Demand Printing of One-Part Geopolymer Using Municipal Solid Waste Incineration Bottom Ash and Blast Furnace Slag
  31. Koszela Kamila, Chajec Adrian (2025-03)
    Sustainable Additive Manufacturing:
    How the Composition of the Cementitious Mix Influences Its Fresh Properties
  32. Aktürk Büşra, Ertuğrul Onur, Özen Ömer, Oktay Didem et al. (2025-03)
    Influence of Nano-Silica and R-MgO on Rheological Properties, 3D Printability, and Mechanical Properties of One-Part Sodium Carbonate-Activated Slag-Based Mixes
  33. Sando Mona, Stephan Dietmar (2025-02)
    The Role of Mixing Sequence in Shaping the 3D-Printability of Geopolymers
  34. Ambily Parukutty, Kaliyavaradhan Senthil, Sebastian Shilpa, Shekar Deepadharshan (2025-01)
    Sustainable 3D Printable Concrete-Mix Using Copper-Slag
  35. Zhong Jianjun, Lyu Libo, Deng Yongjie, Ma Haiyan et al. (2025-01)
    An Evaluation-Method for the Printability of Magnesium-Phosphate-Cement Concrete for Integrated Mixing-Stirring-Extrusion Rapid 3D Printing
  36. Vysochinskiy Dmitry, Madsen Gunnar, Lande Ingrid (2025-01)
    An Experimental Study of Consistency and Strength Variation of 3D Printed Concrete Mixes
  37. Souza Eduarda, Rodrigues e Silva Rafaela, Ribeiro Borges Paulo (2025-01)
    Overburden Materials from the Iron Mining as Raw Materials for AAM:
    Preliminary Assessment of Mixes for 3D Concrete Printing
  38. Tinoco Matheus, Cavalcante Tiago, Andrade Luiza, Araújo Olga et al. (2025-01)
    Mix-Design-Strategies for 3D Printable Bio-Based Cementitious Composites Using Rice-Husk-Particles as Multifunctional Aggregates
  39. Liu Junxing, Li Peiqi, Piao Taiyan, Im Sumin et al. (2024-12)
    High-Alumina Cementitious Materials for Binder-Jetting 3D Printing:
    Exploring Suitable Mixing-Ratio and Curing-Solution for Improving Mechanical Properties and Hydration-Reaction
  40. Muthukrishnan Shravan, Feys Dimitri, Mikhalev Daniil, Baumert Chrisitan et al. (2024-09)
    Comparison of Rotational Rheometers for Ready-Mix Concrete
  41. Hanžič Lucija, Šter Katarina, Štefančič Mateja (2024-09)
    Implementing the Excess-Paste-Concept for a Systematic Mix-Design of Printable Concrete
  42. Gürel Şeyma, Wangler Timothy, Garger Moritz, Flatt Robert (2024-09)
    Residence-Time-Distribution Evaluation Method for In-Line Mixing Processes in Digital Concrete
  43. Tao Yaxin, Tittelboom Kim, Rahul Attupurathu, Wangler Timothy et al. (2024-09)
    Static Mixing for Set-on-Demand of Digital Concrete
  44. Obermeier Nico, Brunner Kim, Wiese Felix, Stengel Thorsten (2024-09)
    Development of Low-Cement Lightweight Concrete Mixes for 3D Extrusion Printing
  45. Matos Paulo, Schackow Adilson, Safanelli Nicollas, Zat Tuani (2024-09)
    Developing Binders with Ceramic Waste for 3DCP Mixes
  46. Zhang Nan, Sanjayan Jay (2024-09)
    Rheological Modifiers in Optimizing Quick Nozzle Mixing Technology for 3D Concrete Printing
  47. Will Frank, Storch Florian, Plaschnick Paul, Taubert Markus et al. (2024-09)
    Large-Scale Monolithic Printing with Ready-Mixed Concrete:
    Challenges and Solutions
  48. Nerella Venkatesh, Degen Robin, Frasch Markus (2024-09)
    On-Site Ready-Mix Concrete 3D Printing with Karlos
  49. Rodrigues e Silva Rafaela, Souza Eduarda, Ribeiro Borges Paulo (2024-09)
    One-Part and Two-Part Alkali-Activation of Iron Mining-Tailings for Sustainable 3D Concrete Printing Mixes
  50. Huseien Ghasan, Tan Shea, Saleh Ali, Lim Nor et al. (2024-08)
    Test-Procedures and Mechanical Properties of Three-Dimensional Printable Concrete Enclosing Different Mix-Proportions:
    A Review and Bibliometric Analysis
  51. Rehman Saif, Riaz Raja, Usman Muhammad, Kim In-Ho (2024-08)
    Augmented Data-Driven Approach Towards 3D Printed Concrete Mix Prediction
  52. Peng Yiming, Unluer Cise (2024-07)
    Development of 3D Printed Magnesium-Silicate-Hydrate-Cement Mixes Involving Metakaolin as a Substitute for Silica-Source
  53. Souza Dias Leonardo, Anjos Marcos, Barbosa Marcella, Bezerra Ulisses (2024-07)
    Evaluation of Mix-Design Parameters Based on Basic Constitutive-Relationships for 3DCP Printing
  54. Zhang Nan, Sanjayan Jay (2024-07)
    Pumping-Less 3D Concrete Printing Using Quick Nozzle Mixing
  55. Malik Umair, Riaz Raja, Rehman Saif, Usman Muhammad et al. (2024-07)
    Advancing Mix-Design Prediction in 3D Printed Concrete:
    Predicting Anisotropic Compressive Strength and Slump-Flow
  56. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-07)
    Two-Part Print-Head Mixing of Hybrid Alkali-Activated Cement for Buildability Enhancement in 3D Concrete Printing
  57. Barve Prasad, Bahrami Alireza, Shah Santosh (2024-07)
    A Comprehensive Review on Effects of Material-Composition, Mix-Design, and Mixing-Regimes on Rheology of 3D Printed Geopolymer Concrete
  58. Şahin Hatice, Mardani Ali, Mardani Naz (2024-07)
    Performance Requirements and Optimum Mix Proportion of High-Volume Fly-Ash 3D Printable Concrete
  59. Lee Yoon, Lee Sang, Kim Jae, Jeong Hoseong et al. (2024-07)
    Inter-Layer Bond Strength of 3D Printed Concrete Members with Ultra-High-Performance Concrete Mix
  60. Peng Yiming, Unluer Cise (2024-06)
    Performance and Microstructural Development of 3D Printable MgO-SiO2 Mixes Containing Magnesium-Silicate-Monohydrate
  61. Jakob Cordula, Rudolph Jennifer, Wolf Julian, Neubauer Jürgen (2024-06)
    Hydration of a Two-Component CSA-OPC-Mix-Timing of Component Blending & Setting-on-Demand
  62. Rama Krishna A., Mallik Mainak, Maity Damodar (2024-06)
    Developing an Appropriate Concrete Mix for 3D Concrete Printing
  63. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2024-05)
    Evaluating Clay Characteristics for Printable Geo-Materials:
    A Case Study of Clay-Sand Mixes
  64. Ramakrishnan Sayanthan, Pasupathy Kirubajiny, Mechtcherine Viktor, Sanjayan Jay (2024-05)
    Print-Head Mixing of Geopolymer and OPC Slurries for Hybrid Alkali-Activated Cement in 3D Concrete Printing
  65. Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-03)
    Optimization of Fiber-Reinforced Lightweight Rubber-Concrete Mix-Design for 3D Printing
  66. Wang Xingjian, Naito Clay, Fox John, Bocchini Paolo (2024-02)
    Impact of Mix Proportions on Particle-Bed 3D Printed Concrete Properties
  67. Zhang Hanghua, Tan Yanke, Hao Lucen, Zheng Shipeng et al. (2024-02)
    Intelligent Real-Time Quality-Control for 3D Printed Concrete with Near-Nozzle Secondary-Mixing
  68. Sergis Vasileios, Ouellet-Plamondon Claudiane (2024-02)
    Algorithmic Mix-Design for 3D Printing Materials
  69. Mahanthi S., Kantarao M., Uma Maheswara Rao S., Niharika M. et al. (2024-02)
    Sustainable Mix-Design for 3D Printable Concrete
  70. Panțiru Alexandru, Luca Bogdan, Bărbuța Marinela (2024-01)
    Investigations Regarding Concrete Mixes Suitable for 3D Printing
  71. Zhang Nan, Sanjayan Jay (2024-01)
    Quick Nozzle Mixing Technology for 3D Printing Foam-Concrete
  72. Ambily Parukutty, Kaliyavaradhan Senthil, Sebastian Shilpa, Shekar Deepadharshan (2023-12)
    Mixing Approach for 3D Printable Concrete:
    Method of Addition and Optimization of Superplasticizer Dosage
  73. Hechtl Christian, Kränkel Thomas, Gehlen Christoph (2023-12)
    Near‐Nozzle Mixing for Additive Manufacturing of Cementitious Mortar:
    A Homogeneity Study
  74. Ambily Parukutty, Rajendran Neeraja, Kaliyavaradhan Senthil (2023-11)
    Mix-Design, Optimization and Performance-Evaluation of Extrusion-Based 3D Printable Concrete
  75. Wang Qiang-Chen, Yu Si-Nan, Chen Zi-Xiao, Weng Yiwei et al. (2023-11)
    Promoting Additive Construction in Fast-Developing Areas:
    A Q-Methodology-Analysis of Stakeholder-Perspectives on Policy-Mixes
  76. Bhusal Shiva, Sedghi Reza, Hojati Maryam (2023-11)
    Evaluating the Printability and Rheological and Mechanical Properties of 3D Printed Earthen Mixes for Carbon-Neutral Buildings
  77. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-10)
    Influence of Rheology on Mixing Homogeneity and Mechanical Behavior of Twin-Pipe 3D Printable Concrete
  78. Paritala Spandana, Singaram Kailash, Bathina Indira, Khan Mohd et al. (2023-08)
    Rheology and Pumpability of Mix Suitable for Extrusion-Based Concrete 3D Printing:
    A Review
  79. Zhang Nan, Sanjayan Jay (2023-08)
    Surfactants to Enable Quick Nozzle Mixing in 3D Concrete Printing
  80. Zhang Nan, Sanjayan Jay (2023-07)
    Mechanisms of Rheological Modifiers for Quick Mixing Method in 3D Concrete Printing
  81. Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2023-06)
    The Development of Soil-Based 3D Printable Mixtures:
    A Mix-Design Methodology and a Case Study
  82. Sergis Vasileios, Ouellet-Plamondon Claudiane (2023-06)
    An Optimum Mix-Design Method for 3D Concrete Printing Applications
  83. Jacquet Yohan, Perrot Arnaud (2023-06)
    Evolutionary Approach Based on Thermoplastic Bio-Based Building Material for 3D Printing Applications:
    An Insight into a Mix of Clay and Wax
  84. Sahoo Pitabash, Gupta Souradeep (2023-06)
    3D Printable Earth-Based Alkali-Activated Materials:
    Role of Mix-Design and Clay-Rich Soil
  85. Xu Zhuoyue, Zhang Dawang, Li Hui, Jin Haoyu et al. (2023-06)
    Mix-Design and 3D Printing Correlation-Performance of PCC-Based 3DPM
  86. Paul Suvash, Basit Md, Hasan Noor, Dey Dhrutiman et al. (2023-04)
    3D Printing of Geopolymer Mortar:
    Overview of the Effect of Mix-Design and Printing Parameters on the Strength
  87. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Das Utpal et al. (2023-02)
    Optimization of Mix Proportion of 3D Printable Mortar Based on Rheological Properties and Material-Strength Using Factorial Design of Experiment
  88. Xiao Jianzhuang, Hou Shaodan, Duan Zhenhua, Zou Shuai (2023-01)
    Rheology of 3D Printable Concrete Prepared by Secondary Mixing of Ready-Mix Concrete
  89. Giridhar Greeshma, Prem Prabhat, Kumar Shankar (2023-01)
    Development of Concrete Mixes for 3D Printing Using Simple Tools and Techniques
  90. Malipeddi Reshma, Adiseshu S. (2023-01)
    Impact of Unique Mixing Methodology on Macro and Microstructural Characteristics of Concrete Containing Slag and Fly-Ash
  91. Baek Seoung-Ho, Yang Jung-Ho, Ha Cheol-Woo, Shim Patrick et al. (2022-11)
    Design and Evaluation of Additive Manufactured Highly Efficient Inclined-Wing-Type Continuous Mixer
  92. Dey Dhrutiman, Srinivas Dodda, Boddepalli Uday, Panda Biranchi et al. (2022-09)
    3D Printability of Ternary-Portland-Cement Mixes Containing Fly-Ash and Limestone
  93. Solonina Valentina, Surovtsev I., Butakova M. (2022-09)
    Optimizing the Structure of Construction Mixes for 3D Printing
  94. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2022-09)
    Toward 3D Printable Engineered Cementitious Composites:
    Mix-Design Proportioning, Flowability, and Mechanical Performance
  95. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Tittelboom Kim et al. (2022-09)
    Blending Performance of Helical Static Mixer Used for Twin-Pipe 3D Concrete Printing
  96. Pham Thi, Nguyen Thu, Trinh Thanh, Nguyen Anh et al. (2022-08)
    Development of 3D Printers for Concrete Structures:
    Mix Proportion Design Approach and Laboratory Testing
  97. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-07)
    Automating Mix-Design for 3D Concrete Printing Using Optimization Methods
  98. Ahmed Ghafur, Askandar Nasih, Jumaa Ghazi (2022-07)
    A Review of Large-Scale 3DCP:
    Material-Characteristics, Mix-Design, Printing-Process, and Reinforcement-Strategies
  99. Taubert Markus, Mechtcherine Viktor (2022-06)
    Mix-Design for a 3D Printable Concrete with Coarse Aggregates and Consideration of Standardisation
  100. Mohan Manu, Rahul Attupurathu, Tao Yaxin, Schutter Geert et al. (2022-06)
    Hydration Re-Initiation of Borated CSA Systems with a Two-Stage Mixing Process:
    An Application in Extrusion-Based Concrete 3D Printing
  101. Wang Xianggang, Jia Lutao, Jia Zijian, Zhang Chao et al. (2022-06)
    Optimization of 3D Printing Concrete with Coarse Aggregate via Proper Mix-Design and Printing-Process
  102. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-04)
    D-Optimal Design of Experiments Applied to 3D High-Performance Concrete Printing Mix-Design
  103. Tan Yuan, Dahlenburg Maximilian, Fottner Johannes, Kessler Stephan (2022-04)
    Influencing Factors of the Mixing Performance of a Near-Nozzle Continuous Mixer for 3D Concrete Printing:
    An Analysis Based on Spatial-Lacey-Mixing-Index
  104. Wangler Timothy, Pileggi Rafael, Gürel Şeyma, Flatt Robert (2022-03)
    A Chemical Process Engineering Look at Digital Concrete Processes:
    Critical Step Design, In-Line Mixing, and Scale-Up
  105. Cui Hongzhi, Yu Shiheng, Cao Xiangpeng, Yang Haibin (2022-03)
    Evaluation of Printability and Thermal Properties of 3D Printed Concrete Mixed with Phase-Change-Materials
  106. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2022-02)
    Set-on-Demand Geopolymer Using Print-Head Mixing for 3D Concrete Printing
  107. Kompella Sriram, Monte Francesco, Cucchi Marco, Marcucci Andrea et al. (2021-12)
    A Methodology to Assess Early-Age Fracture Performance of 3D Printable Cementitious Mixes
  108. Liu Hanqiu, Egbe King-James, Wang Haipeng, Nazar Ali et al. (2021-11)
    A Numerical Study on 3D Printed Cementitious Composites Mixes Subjected to Axial Compression
  109. Zhang Nan, Xia Ming, Sanjayan Jay (2021-10)
    Short-Duration Near-Nozzle Mixing for 3D Concrete Printing
  110. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2021-09)
    Developing Mix Proportions for Class C Fly-Ash-Based Alkali-Activated 3D Printed Concrete Mixtures
  111. Kompella Sriram, Marcucci Andrea, Monte Francesco, Bassani Andrea et al. (2021-09)
    A Study of Early-Age Shear Properties of 3D Printable Cementitious Mixes with Fiber-Reinforcements
  112. Rehman Atta, Kim Jung-Hoon (2021-07)
    3D Concrete Printing:
    A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
  113. Zhang Chao, Nerella Venkatesh, Krishna Anurag, Wang Shen et al. (2021-06)
    Mix-Design Concepts for 3D Printable Concrete:
    A Review
  114. Bakhshi Amir, Sedghi Reza, Hojati Maryam (2021-06)
    A Preliminary Study on the Mix-Design of 3D Printable Engineered Cementitious Composite
  115. Zhao Zhihui, Chen Mingxu, Xu Jiabin, Li Laibo et al. (2021-03)
    Mix-Design and Rheological Properties of Magnesium-Potassium-Phosphate Cement Composites Based on the 3D Printing-Extrusion-System
  116. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
    Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
    Possibilities and Challenges
  117. Álvarez-Fernández Martina, Prendes-Gero María, González-Nicieza Celestino, Guerrero-Miguel Diego-José et al. (2021-02)
    Optimum Mix-Design for 3D Concrete Printing Using Mining-Tailings:
    A Case Study in Spain
  118. Baz Bilal, Rémond Sébastien, Aouad Georges (2021-01)
    Influence of the Mix Composition on the Thixotropy of 3D Printable Mortars
  119. Kristombu Baduge Shanaka, Navaratnam Satheeskumar, Zidan Yousef, McCormack Tom et al. (2021-01)
    Improving Performance of Additive Manufactured Concrete:
    A Review on Material Mix-Design, Processing, Inter-Layer Bonding, and Reinforcing-Methods
  120. Panda Biranchi, Sonat Cem, Yang En-Hua, Tan Ming et al. (2020-12)
    Use of Magnesium-Silicate-Hydrate (M-S-H) Cement Mixes in 3D Printing Applications
  121. Hou Shaodan, Duan Zhenhua, Xiao Jianzhuang, Ye Jun (2020-12)
    A Review of 3D Printed Concrete:
    Performance-Requirements, Testing Measurements and Mix-Design
  122. Dwivedi Ashutosh, Pal Ankit, Patel Shiv, Chourasia Ajay et al. (2020-10)
    Evaluation of Model 3D Printer and Design Mix for 3D Concrete Printing
  123. Natanzi Atteyeh, McNally Ciaran (2020-07)
    Characterising Concrete Mixes for 3D Printing
  124. Vishruthi M., Raghavendra S., Ravi Teja Y., Anand K. (2020-05)
    Evaluation of Cementitious Mixes for Printing
  125. Khan Mohd (2020-04)
    Mix Suitable for Concrete 3D Printing:
    A Review
  126. Panda Biranchi, Ruan Shaoqin, Unluer Cise, Tan Ming (2020-01)
    Investigation of the Properties of Alkali-Activated Slag Mixes Involving the Use of Nano-Clay and Nucleation-Seeds for 3D Printing
  127. Gopani Aagam, Shah Parshva, Shah R. (2020-01)
    Developing and Analyzing Mix-Design for 3D Printable Concrete
  128. Ji Guangchao, Ding Tao, Xiao Jianzhuang, Du Shupeng et al. (2019-05)
    A 3D Printed Ready-Mixed Concrete Power-Distribution Substation:
    Materials and Construction Technology
  129. Malaeb Zeina, Sakka Fatima, Hamzeh Farook (2019-02)
    3D Concrete Printing:
    Machine Design, Mix Proportioning, and Mix Comparison Between Different Machine Setups
  130. Khalil Noura, Rémond Sébastien, Baz Bilal, Aouad Georges (2018-09)
    Characterization of 3D Printing Mortars Made with OPC-CSA Mixes
  131. Vandenberg Aileen, Bessaies-Bey Hela, Wille Kay, Roussel Nicolas (2018-09)
    Enhancing Printable Concrete Thixotropy by High-Shear Mixing
  132. Hojati Maryam, Nazarian Shadi, Duarte José, Radlińska Aleksandra et al. (2018-04)
    3D Printing of Concrete:
    A Continuous Exploration of Mix-Design and Printing-Process
  133. Panda Biranchi, Tan Ming (2018-03)
    Experimental Study on Mix Proportion and Fresh Properties of Fly-Ash-Based Geopolymer for 3D Concrete Printing
  134. Yuan Yong, Tao Yaxin (2018-03)
    Mixing and Extrusion of Printing Concrete
  135. Shakor Pshtiwan, Renneberg Jarred, Nejadi Shami, Paul Gavin (2017-07)
    Optimization of Different Concrete Mix Designs for 3D Printing by Utilizing 6DOF Industrial Robot
  136. Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
    Mix-Design and Fresh Properties for High-Performance Printing Concrete
  137. Deng Shou-chang, Zhang Xue-bing, Qin Ying-hui, Luo Guan-xiang (2007-02)
    Rheological Characteristic of Cement Clean Paste and Flowing Behavior of Fresh Mixing Concrete with Pumping in Pipeline