#development¶

Keywords by Co - Occurrence¶

#print (143) #concrete (99) #cement (59) #construction (52) #printability (39)

1. Xie Fan, Hu Hailong, Deng Yang, Wang Dong et al. (2026-04)
   Development of Heat-Triggered Sulfate Capsule for on-Demand Setting 3D Printing Phosphogypsum-Based Cement
2. García-Alvarado Rodrigo, Soza-Ruiz Pedro, Valenzuela-Astudillo Eduardo (2026-04)
   Parametric Form-Finding for 3D-Printed Housing:
   A Computational Workflow from Generative Exploration to Architectural Development
3. Lu Pengyuan, Yang Yekai, Zhao Qingxin, Liu Zhongxian et al. (2026-03)
   Low-Carbon 3D-Printed Geopolymer Ultra-High-Strength Concrete Enabled by Soda Residue:
   Sustainable Development and Environmental Impact Assessment
4. Lasquite N., Ramos M., Alfeche F., Mendija L. et al. (2026-03)
   Novel Efficient-Inexpensive Development of Hydrophobic 3D-Printed Mortar Composite for Moisture Prevention Multi-Application
5. Lal Dhirajkumar, Rangari Vinay, Khare Karan (2026-03)
   Structural Optimization and Cost-Efficient Development of an Indigenous Gantry-Type 3D Concrete Printing System for Scalable Construction Applications
6. Dewi Melati, Wang Wei-Chien, Lin Wei-Ting (2026-03)
   Development of Low-Thermal-Conductivity Fly Ash Geopolymer Foam Mortars with Stabilizer Effects and 3D Printability Assessment
7. Koedmontree Porntipa, Thanakulwuttiporn Phachara, Wongwian Laksameekarn, Jai-Inta Pruksa et al. (2026-02)
   Development of High-CaO Fly Ash-Based Alkali-Activated Mortar for 3D Printing Technology
8. Khalil Jawad, Fakih Amin, Yaseen Zaher, Osta Mohammed et al. (2026-02)
   Influence of Chemical Components and Molar Ratios on Strength Development of One-Part Alkali-Activated Mortar: Ensemble Machine Learning Models
9. Versteege Jelle, Salet Theo, Wolfs Robert (2026-02)
   Sensory Data Mapping and Database Development for Interlayer Bond Strength:
   Towards Digital Shadows in 3D Concrete Printing
10. García-Alvarado Rodrigo, Muñoz-Sanguinetti Claudia, Ulloa-Aguayo Paula, Rocha-Rubilar Aracely et al. (2026-02)
    Development of a Residential Prototype Using 3D-Printed Elements
11. Dey Dhrutiman, Panda Biranchi, Kole Jagabandhu (2026-02)
    Investigation into the Effect of Full Replacement with Portland Slag Cement and Screened Slag Sand for Development of Sustainable 3D Printed Concrete
12. Paul Aranya, Manosalvas Holst Carlos, Berryman Charles, Friedland Carol et al. (2026-01)
    Development of Sustainable Low-Cement Construction 3D Printing Materials via Dense Particle Packing
13. Qureshi Mohsin, Shizawi Amira, Kindi Ghassan, Sawafi Bushra et al. (2026-01)
    Development of Cementitious Material by Incorporating Fine Waste Materials for Testing in Newly Developed Portable Concrete 3D Printer
14. Muñoz-Benavides Miguel, Robayo-Salazar Rafael, Gordillo-Suárez Marisol, Mejía de Gutiérrez Ruby (2026-01)
    Development and Optimisation of a Standardised Rheological Method for 3D Printing Cementitious Mixtures Using Rotational Rheometry: An Experimental and Statistical Approach
15. Wang Xiangyu, Wang Sizhe, Deng North, Liu Zhenbang et al. (2026-01)
    Robotic Rebar Insertion and Grouting for Reinforcement of 3D Printed Concrete:
    Technique Development and Bond Behavior Characterization
16. Bassi Utkarsh, Sahai Rajan, Bisht Ravindra, Verma Yash et al. (2026-01)
    Design Analysis and Development of a Benchtop 3D Concrete Printer
17. Paul Suvash, Lee Junghyun, Tay Yi, Amr Issam et al. (2025-12)
    Developing Sustainable 3D Printable Concrete Materials Using Olivine Sand for Carbon Sequestration
18. Baharlou Ehsan, Datta Ipsita, Ozbulut Osman (2025-12)
    Feasibility of 3D Printing Oyster Shell Waste Laden Hydrogel Inks for Developing Mycelium Composite in Architectural Materials
19. Álvarez Luisa, Fernandez Brian, Saldarriaga Federico, Romero Héctor et al. (2025-11)
    Development and Bioclimatic Evaluation of Parametrically Designed Geometries for 3D-Printed Concrete Walls
20. Tulliani Jean-Marc (2025-11)
    Latest Developments in 3D-Printed Engineered Cementitious Composites:
    Technologies, Prospects, and Challenges
21. Gümrük Idil, Schröder Torsten, Wolfs Robert, Salet Theo (2025-11)
    3DCP-CI:
    Developing a Circularity Indicator for Assessing 3DConcrete Printed Architectural Designs
22. Bawab Jad, Dieb Amr, Hassan Hilal (2025-11)
    Preliminary Investigation into the Development of Cement-Free Composites Using Emerging Alternatives for 3D Printing
23. Maroszek Marcin, Rudziewicz Magdalena, Shah Syed, Tran Doan et al. (2025-11)
    Development of Eco-Friendly Construction Materials for 3D Printing Using Fly Ash and Demolition Waste
24. Cheng Zhangqi, Zhou Lu, Jia Xiangxi, Liu Renlong (2025-10)
    Experimental Study on Crack Development and Fracture Performance of 3D Printed Green Engineered Cementitious Composites
25. Uddin Md, Mostazid Md, Faysal Md, Shi Xinjun (2025-10)
    Developing a Novel Strength Predictive Modeling for 3D Printable Geopolymer Concrete:
    An Interpretable Data-Driven Approach
26. Bhowmik Anirban, Bhattacharjee Biswajoy, Sahu Prakash (2025-10)
    3D Concrete Printing:
    Pioneering Innovations and Recent Development
27. Kamakshi Tippabhotla, Chau Bao, Tugelbayev Aidyn, McCoy Andrew et al. (2025-10)
    Developing 3D Printable Concrete Using Quarry by-Products as Partial Replacement for Cement
28. Rahman Mahfuzur, An Dong, Rawat Sanket, Yang Richard et al. (2025-09)
    Development of Green 3D Printable Cementitious Composites Using Multi-Response Optimisation Method
29. Rabul H., Prem Prabhat, Ravichandran Darssni, Rathan RT Arjun (2025-09)
    Development of Fly Ash and Limestone Calcined Clay-Based Mixtures for Concrete 3D Printing
30. Piechówka-Mielnik Magdalena, Bednarz Łukasz, Krupa Michał, Wojciechowska Gabriela et al. (2025-09)
    Sustainable Development in Building Engineering:
    Hempcrete in 3D Printing Technology
31. Xue Jia-Chen, Wang Wei-Chien, Lee Ming-Gin, Huang Chia-Yun (2025-09)
    Development of Sustainable 3D Printing Concrete Materials:
    Impact of Natural Minerals and Wastes at High Replacement Ratios
32. Wang Chaofan, Chen Bing, Wang Yong, Vo Thanh et al. (2025-08)
    Influencing Mechanism of Magnesium-to-Phosphate Ratio on the Rheology and Microstructure Development of 3D-Printed Magnesium Phosphate Cement at Early Hydration
33. Pan Keheng, Cheng Yinhan, Qu Guangfei, Yuan Zheng et al. (2025-07)
    Development and Optimization of Geopolymer-Based 3D Printing Materials Utilizing Industrial Solid Waste:
    Rheological Properties and Practical Applications
34. Khare Karan, Khan Subim, Lal Dhirajkumar, Sonawane Pavankumar et al. (2025-07)
    Design and Development of a Nozzle Assembly for 3D Concrete Printing Applications
35. Bajwa Asad, Flemmer Claire, Samarasinghe Don, Bao Ding et al. (2025-07)
    Sustainability of 3D Printing Technology:
    A Review on Research Trends and Developments
36. Haar Bjorn, Kruger Jacques, Zijl Gideon (2025-06)
    3D Printed Concrete Pinned Beam-Column Connection Development
37. Gomez Jaramillo Laura, Luković Mladena, Šavija Branko, Zhou Wen (2025-06)
    Recycled Sand for 3D-Printed Strain Hardening Cementitious Composite:
    A Review of Recent Developments
38. Lyu Xin, Ayough Pouria, Nawaz Waleed, Elchalakani Mohamed (2025-06)
    Development and Characterization of Printable Rubberised Ultra-High-Performance Concrete
39. Musathik A., Ashfak M., Arif M., Samaraweera B. et al. (2025-06)
    Towards Smart Construction:
    Development of an Automated Small Scale 3D Concrete Printer
40. Gupta Souradeep, Sahana C., Soda Prabhath, Dwivedi Ashutosh (2025-06)
    Development of Carbon Sequestering 3D-Printable Stabilized Earth Materials:
    Investigation into Engineering Performance and Resistance Against Acid Attack
41. Lucen Hao, Hanxiong Lyu, Huanghua Zhang, Shipeng Zhang et al. (2025-05)
    Development of CO2-Activated Interface Enhancer to Improve the Interlayer Properties of 3D-Printed Concrete
42. Aminpour Nima, Memari Ali (2025-05)
    Development of EPS Light‐weight Concrete for 3D Printing
43. Sapata Alise, Šinka Māris, Puzule Līga, Plūmiņš Ernests et al. (2025-05)
    Developing Low-CO₂ 3D-Printable Concrete with Waste Ash and Recycled Aggregates
44. Temirzakuly Bakbergen, Nurgaliuly Dias, Kim J., Shehab Essam et al. (2025-04)
    Development of Cost-Effective Geopolymer Mortars from Low-Grade Metakaolin and Bottom Ash for 3D Construction Printing
45. Ali Shah Syed, Zhang Shipeng, Xuan Dongxing, Poon Chi (2025-04)
    Development of a Novel Mixing Strategy for Set-on-Demand Printing of One-Part Geopolymer Using Municipal Solid Waste Incineration Bottom Ash and Blast Furnace Slag
46. Yuan Yong, Sheng Ruyi, Yao Xupeng, Pichler Bernhard et al. (2025-03)
    A Three-Step Development Strategy for 3D Printable Concrete Containing Coarse Aggregates
47. Ramirez Rodriguez Fatima, Pancho Paolo, Sanchez Daniela, Poudel Suman et al. (2025-02)
    Design and Development of a Lean Robotic Cell for Concrete 3D Printing
48. Teng Fei, Xu Fengming, Yang Minxin, Yu Jie et al. (2025-02)
    Development of Sustainable Strain-Hardening Cementitious Composites Containing Diatomite for 3D Printing
49. Gurunandan M., Nedunuri Aparna, Tanwar Jayant, Nanthagopalan Prakash et al. (2025-02)
    Development of 3D-Printable Alkali-Activated GGBFS and Fly-Ash-Binder-Based Mortars with Concrete-Demolition-Waste as Aggregates
50. Shafei Hazwani, Arpa Ar, Rahman Rahimi, Algahtany Mohammed et al. (2024-12)
    Difficulties and Benefits of Implementing 3D Printing in Housing Development
51. Ali Md., Abilgaziyev Anuar, Temirzakuly Bakbergen, Kurokawa Syuhei (2024-12)
    Development of a Novel 3D Construction Printer for Consistent Buildability of Novel Geopolymer Mortar and Its Challenges
52. Rycke Klaas, Bourriche Meriem, Daffner Tim (2024-11)
    Research and Development for 3DCP:
    Challenges, Opportunities and Solutions in Current 3DCP Realizations from B+G
53. Heinze Lisa, Liebringshausen Anne, Eversmann Philipp (2024-11)
    3D Printing with Wood Waste:
    Development of Reusable Printing Material Based on Waste Wood Particles and Its Digital Manufacturing Process for Wall Constructions in Architecture
54. Dias José, Brandão Filipe, Castro André, Félix Maria (2024-11)
    Designing Tomorrow's Coral Reefs:
    3DCP Potential in Innovative Artificial Coral-Reefs-Systems Development
55. Rajeev Pathmanathan, Sanjayan Jay (2024-11)
    Current Developments in the Application of Extrusion-Based 3D Concrete Printing
56. Kaszyńska Maria, Skibicki Szymon (2024-11)
    Sustainable Development Approach for 3D Concrete Printing
57. Loaiza Sebastián, Ortiz Albert, Gómez Daniel, García Alvarez José et al. (2024-11)
    3D Printing Applied to Building Development Around the World:
    A Systematic Literature Review
58. Murali Gunasekaran, Leong Sing (2024-11)
    Waste-Driven Construction:
    A State of the Art Review on the Integration of Waste in 3D Printed Concrete in Recent Researches for Sustainable Development
59. Warsi Syed, Panda Biranchi, Biswas Pankaj (2024-11)
    Development of Ultra-Ductile Strain-Hardening 3D Printed Concrete Composite Utilizing Critical Fiber Volume and Coarse Aggregate
60. Adamtsevich Liubov, Pustovgar Andrey, Adamtsevich Aleksey (2024-10)
    Assessing the Prospects and Risks of Delivering Sustainable Urban Development Through 3D Concrete Printing Implementation
61. Nakanishi Reina, Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki et al. (2024-10)
    Design and Development of a Shape Measurement System for 3D Construction Printing with a Manipulator
62. Lindner Marco, Gliniorz Ralf, Funke Henrik, Männel Mike et al. (2024-10)
    Tool-Development for Pre-Cast Concrete Elements in Robot-Assisted Flow-Production
63. Liu Xuelin, Sheng Haitao, Feng Binqing, Wang Liang et al. (2024-09)
    Development of Novel Alkaline-Electrolyzed-Water on the Properties of 3D Printed Calcium-Sulphoaluminate-Cement Composites
64. García-Alvarado Rodrigo, Soza-Ruiz Pedro, Valenzuela-Astudillo Eduardo, Martuffi-Lazo Daniela et al. (2024-09)
    Development of a Generative Design System for 3D Printed Houses in Chile
65. Srinivas Dodda, Boddepalli Uday, Dey Dhrutiman, Choaudhary Bhavesh et al. (2024-09)
    Development of Outdoor Furniture Using 3D Concrete Printing
66. He Lewei, Pan Jiahui, Hee Yu, Chen Hao et al. (2024-09)
    Development of Novel Concave and Convex Trowels for Higher Inter-Layer Strength of 3D Printed Cement-Paste
67. Singh Pranay, Gadde Venkateswara, Zhou Chi, Okumus Pinar et al. (2024-09)
    Development of 3D Printable Strain-Hardening Cementitious Composites for Bridge-Related Applications
68. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2024-09)
    Development of a Tool for Generating a Constant Volume-Flow with Peristaltic Pumps for Robot-Controlled Concrete-Extrusion
69. Yoshihara Rei, Hashimoto Katsufumi, Sugiyama Takafumi, Nakase Kota (2024-09)
    Development and Validation of Finite-Element-Constitutive-Model for Meso-Scale Compressive Fracture Behavior of 3D Printed Mortar
70. Tudela Marcell, Cardenas Palomino Kelssy, Bienvenu Sophie, Dunkelberg Federico et al. (2024-09)
    Development and Characterization of a Printable Concrete Made with Construction and Demolition-Waste-Aggregates
71. Bier Henriette, Hidding Arwin, Lewandowska J., Calabrese Giuseppe (2024-09)
    Developing a Computer-Vision Application for Crack Detection
72. Rehman Atta, Kang Seungwoo, Kim Jung-Hoon (2024-09)
    Nozzle-Integrated Slump-Scanner-Test:
    Development of an Automated Shape-Stability and Instantaneous Yield-Stress-Measurement-Method for the Set-on-Demand 3D Concrete Printing
73. Obermeier Nico, Brunner Kim, Wiese Felix, Stengel Thorsten (2024-09)
    Development of Low-Cement Lightweight Concrete Mixes for 3D Extrusion Printing
74. Sapata Alise, Šinka Māris, Šahmenko Genādijs, Bajāre Diāna et al. (2024-09)
    Development of 3D Printable Cement-Based Composite Containing Oil Shale Ash
75. Chen Yu, Zhang Yamei, Schlangen Erik, Çopuroğlu Oğuzhan (2024-09)
    Development of Set-on-Demand 3D Printable Limestone-Calcined-Clay-Based Cementitious Materials Using Desalination Brine
76. Matos Paulo, Schackow Adilson, Safanelli Nicollas, Zat Tuani (2024-09)
    Developing Binders with Ceramic Waste for 3DCP Mixes
77. Khan Mehran, McNally Ciaran (2024-09)
    A Review of Developments in Low-Carbon 3D Printed Concrete in Europe:
    Steps Towards Sustainable Construction
78. Bos Derk, Lucas Sandra, Blaakmeer Jan, Salet Theo et al. (2024-09)
    Development of the On-Line Gravity-Induced Compression-Test:
    The Inverse-Slugs-Test
79. Rasehorn Inken, Ehm Clemens, Frohmüller Max, Schaudienst Falk et al. (2024-09)
    Development and Holistic Suitability-Assessment of 3D Printable Mortar
80. Sood Sandeep, Lamba Yogveer, Singh Ashutosh (2024-09)
    Progress and Prospects of 3D and 4D Printing in Sustainable Development:
    A Scientometric Review
81. Disu Oluwatimilehin, Ismail Sikiru, Wood Luke, Chrysanthou Andreas et al. (2024-08)
    Design and Development of a Small-Scale Cement-Based 3D Printing Robot Extrusion Nozzle
82. Bodea Serban, Dell’Endice Alessandro, Aloutsanidis Vasilis, Bürgin Theophil et al. (2024-08)
    Phoenix 3D Concrete-Printed Bridge:
    Falsework System and Construction Process Development
83. Dai Xiaodi, Tao Yaxin, Zhang Yi, Ding Luchuan et al. (2024-08)
    Development of 3D Printable Alkali-Activated Slag-Metakaolin Concrete
84. Reddy B., Sameer Sk, Ramesh V., Sriya B. et al. (2024-08)
    Sustainable Development of 3D Printable Quaternary Geopolymer Concrete
85. Aabbas Mohamed, Mahdaoui Mustapha, Ahachad Mohammed, Mazian Brahim et al. (2024-07)
    Advancing Sustainable Construction:
    Terracotta Component Development Through Extrusion-Based 3D Printing with Local Clay
86. Peng Yiming, Unluer Cise (2024-07)
    Development of 3D Printed Magnesium-Silicate-Hydrate-Cement Mixes Involving Metakaolin as a Substitute for Silica-Source
87. Sahai Rajan, Bisht Ravindra, Singh Siddharth, Panigrahi Soraj (2024-07)
    Design-Analysis and Development of a Gantry Robot for Multi-Layer 3D Concrete Printing with Simulation and Experimental Validation
88. Sahana C., Soda Prabhath, Dwivedi Ashutosh, Kumar Sandeep et al. (2024-07)
    3D Printing with Stabilized Earth:
    Material-Development and Effect of Carbon-Sequestration on Engineering-Performance
89. Shin Eun, Carcassi Olga, Maierdan Yierfan, Kawashima Shiho et al. (2024-07)
    Developing 3D Printed Natural Fiber-Rich Earth Materials in Construction
90. Teng Fei, Ye Junhong, Yu Jie, Li Heng et al. (2024-07)
    Development of Strain-Hardening Cementitious Composites (SHCC) As Bonding Materials to Enhance Inter-Layer and Flexural Performance of 3D Printed Concrete
91. Ghaffar Seyed, Noaimat Yazeed, Chougan Mehdi, Kheetan Mazen (2024-06)
    Emerging Resources for the Development of Low-Carbon Cementitious Composites for 3D Printing Applications
92. Peng Yiming, Unluer Cise (2024-06)
    Performance and Microstructural Development of 3D Printable MgO-SiO2 Mixes Containing Magnesium-Silicate-Monohydrate
93. Sando Mona, Stephan Dietmar (2024-06)
    The Development of a Fly-Ash-Based Geopolymer for Extrusion-Based 3D Printing, Along with a Printability Prediction Method
94. Čítek David, Hurtig Karel, Kolísko Jiří, Koteš Peter (2024-06)
    Cementitious Material Development for Additive Fabrication
95. Melter Oto, Čítek David, Hvizdal Ales, Gabriel Michael et al. (2024-06)
    Development of a Robotic Fabrication System for Cementitious Materials
96. Rama Krishna A., Mallik Mainak, Maity Damodar (2024-06)
    Developing an Appropriate Concrete Mix for 3D Concrete Printing
97. Čítek David, Hurtig Karel, Bureš Vladislav, Koteš Peter (2024-06)
    Cementitious Material Development for Additive Fabrication
98. Khan Mehran, McNally Ciaran (2024-05)
    Recent Developments on Low-Carbon 3D Printing Concrete:
    Revolutionizing Construction Through Innovative Technology
99. Jhun Jihye, Lee Dong-Hyun, Rehman Atta, Kang Seungwoo et al. (2024-05)
    Development of a Real-Time Geometric Quality Monitoring System for Extruded Filaments of 3D Concrete Printing Construction
100. Singh Aman, Digi Rohan, Mishra Ruby, Mohanty Rajiva et al. (2024-05)
     The Design and Development of a Low Cost 3D Concrete Printer
101. Lu Bing, Wang Lining, Wang Xiangyu, Tan Ming et al. (2024-04)
     Development of Robotic Sprayable Self-Sensing Cementitious Material for Smart Structural Health Monitoring
102. Sun Bochao, Dominicus Randy, Dong Enlai, Li Peichen et al. (2024-04)
     Predicting the Strength Development of 3D Printed Concrete Considering the Synergistic Effect of Curing-Temperature and Humidity:
     From Perspective of Modified Maturity-Model
103. Zaid Osama, Ouni Mohamed (2024-04)
     Advancements in 3D Printing of Cementitious Materials:
     A Review of Mineral Additives, Properties, and Systematic Developments
104. Yu Haoxuan, Wen Bodong, Zahidi Izni, Chow Ming et al. (2024-04)
     Constructing the Future:
     Policy-Driven Digital Fabrication in China's Urban Development
105. Negron-McFarlane Christian, Kreiger Eric, Barna Lynette, Stynoski Peter et al. (2024-04)
     Development of In-Place Test-Methods for Evaluating Printable Concretes
106. Anandaraj S., Sowmya S., Krishnaraja A., Mithun T. (2024-03)
     Development of Green Engineered Cementitious Composite Using Fly-Ash and Nano-Silica for 3D Printing
107. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Li Xuesen et al. (2024-03)
     Development of a Novel Extrusion-Device to Improve the Printability of 3D Printable Geopolymer Concrete
108. Soda Prabhath, Dwivedi Ashutosh, Sahana C., Gupta Souradeep (2024-03)
     Development of 3D Printable Stabilized Earth-Based Construction Materials Using Excavated Soil:
     Evaluation of Fresh and Hardened Properties
109. Alhussain Ali, Duarte José, Brown Nathan (2024-02)
     Developing a Data-Driven Filament-Shape-Prediction-Model for 3D Concrete Printing
110. Zeng Jun-Jie, Yan Zitong, Jiang Yuan, Li Pei-Lin (2024-02)
     3D Printing of FRP Grid and Bar Reinforcement for Reinforced Concrete Plates:
     Development and Effectiveness
111. Rehman Atta, Kim Ik-Gyeom, Kim Jung-Hoon (2024-01)
     Towards Full Automation in 3D Concrete Printing Construction:
     Development of an Automated and In-Line Test-Method for In-Situ Assessment of Structural Build-Up and Quality of Concrete
112. Sahai Rajan, Bisht Ravindra, Malviya Nitesh, Kumar Shivam et al. (2024-01)
     Aspects of Waste-Material-Utilization and 3D Concrete Printer Development-Approach:
     A Review
113. Lindner Marco, Gliniorz Ralf, Männel Mike, Garbe Daniel et al. (2023-12)
     Tool-Developments for Additive Manufacturing-Processes with Anchor for the Modern Flow-Production
114. Kruppa Henning, Kalthoff Matthias, Vollpacht Anya, Matschei Thomas (2023-12)
     Development of an Alkali-Activated Binder for the Extrusion Process
115. Dams Barrie, Shepherd Paul, Ball Richard (2023-11)
     Development and Performance Evaluation of Fibrous Pseudoplastic Quaternary Cement Systems for Aerial Additive Manufacturing
116. Wang Qiang-Chen, Yu Si-Nan, Chen Zi-Xiao, Weng Yiwei et al. (2023-11)
     Promoting Additive Construction in Fast-Developing Areas:
     A Q-Methodology-Analysis of Stakeholder-Perspectives on Policy-Mixes
117. Koneswaran Bahirathan, Rajeev Pathmanathan, Sanjayan Jay (2023-11)
     Development of a Prototype Concept for Using 3D Concrete Printing in Pavement Construction
118. Li Long, Hao Lucen, Li Xiao-Sheng, Xiao Jianzhuang et al. (2023-11)
     Development of CO2-Integrated 3D Printing Concrete
119. Fiala Lukáš, Lin Wei-Ting, Hotěk Petr, Cheng An (2023-11)
     Feasibility Study of Developing Cementless Blended Materials as 3D Printable Materials
120. Akman Arabella, Sadhu Ayan (2023-10)
     Recent Development of 3D Printing Technology in Construction Engineering
121. Suryanto Benny, Higgins J., Aitken M., Tambusay Asdam et al. (2023-10)
     Developments in Portland Cement/GGBS Binders for 3D Printing Applications:
     Material-Calibration and Structural Testing
122. Muthukrishnan Shravan, Ramakrishnan Sayanthan, Sanjayan Jay (2023-09)
     Rapid Early-Age Strength Development of In-Line Activated Geopolymer for Concrete 3D Printing
123. Yin Xunzhi, Guo Chong, Sun Bo, Chen Honggang et al. (2023-09)
     The State of the Art in Digital Construction of Clay Buildings:
     Reviews of Existing Practices and Recommendations for Future Development
124. Hu Hailong, Huang Jian, Wang Tiezhu, Manuka Mesfin et al. (2023-09)
     Impact of Calcium Sulfoaluminate Cement on Printability and Early Strength Development of a Slag-Based 3D Printing Cementitious Material
125. Ye Junhong, Teng Fei, Yu Jie, Yu Shiwei et al. (2023-08)
     Development of 3D Printable Engineered Cementitious Composites with Incineration-Bottom-Ash for Sustainable and Digital Construction
126. Federowicz Karol, Techman Mateusz, Skibicki Szymon, Chougan Mehdi et al. (2023-08)
     Development of 3D Printed Heavyweight Concrete Containing Magnetite-Aggregate
127. Lu Bing, Li Hongliang, Wong Teck, Qian Shunzhi (2023-08)
     Development of a Functional Cementitious Mixture with Expanded Graphite for Automated Spray Construction
128. Salah Husam, Mutalib Azrul, Kaish Amrul, Syamsir Agusril et al. (2023-07)
     Development of Ultra-High-Performance Silica-Fume-Based Mortar Incorporating Graphene-Nano-Platelets for 3D Concrete Printing Application
129. Hu Rongbo, Pan Wen, Iturralde Kepa, Linner Thomas et al. (2023-07)
     Construction Automation and Robotics for Concrete Construction:
     Case Studies on Research, Development, and Innovations
130. Núñez Varillas Christoper, Regalado Espinoza Marck, Gago Gamboa Angela (2023-07)
     3D Printing:
     An Opportunity for the Sustainable Development of Building Construction
131. Mortada Youssef, Masad Eyad, Kogbara Reginald, Mansoor Bilal et al. (2023-06)
     Development of Ca(OH)2-Based Geopolymer for Additive Manufacturing Using Construction Wastes and Nano-Materials
132. Daher Jana, Kleib Joelle, Benzerzour Mahfoud, Abriak Nor-Edine et al. (2023-06)
     The Development of Soil-Based 3D Printable Mixtures:
     A Mix-Design Methodology and a Case Study
133. Zhang Sisi, Kalus Matthias, Engel Sven, Hegger Josef et al. (2023-06)
     Development of an Innovative 3D Printing Process for Reinforced Concrete:
     AMoRC Method
134. Pressmair Nadine, Kromoser Benjamin (2023-06)
     Development-Stages of Structurally Optimized Concrete Girders:
     Design-Concepts, Material-Strategies and Experimental Investigation
135. Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-06)
     A System-Development-Strategy of a Digital Construction for Building Frames
136. Deng Qi, Zou Shuai, Xi Yonghui, Singh Amardeep (2023-06)
     Development and Characteristic of 3D Printable Mortar with Waste-Glass-Powder
137. Mujeeb Syed, Samudrala Manideep, Lanjewar Bhagyashri, Chippagiri Ravijanya et al. (2023-05)
     Development of Alkali-Activated 3D Printable Concrete:
     A Review
138. Zhao Yasong, Gao Yangyunzhi, Chen Gaofeng, Li Shujun et al. (2023-04)
     Development of Low-Carbon Materials from GGBS and Clay-Brick-Powder for 3D Concrete Printing
139. Qureshi Mohsin, Shiwazi Amira, Kindi Ghassan, Sawafi Bushra et al. (2023-03)
     Development of Additive for Concrete 3D Printer by Using Local Materials
140. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2023-03)
     Developing 3D Printable and Buildable Limestone-Calcined-Clay-Based Cement Composites with Higher Aggregate Content
141. Cuevas Villalobos Karla, Strzałkowski Jarosław, Kim Ji-Su, Ehm Clemens et al. (2023-02)
     Towards Development of Sustainable Lightweight 3D Printed Wall Building Envelopes:
     Experimental and Numerical Studies
142. Beersaerts Glenn, Hertel Tobias, Lucas Sandra, Pontikes Yiannis (2023-02)
     Promoting the Use of Fe-Rich Slag in Construction:
     Development of a Hybrid Binder for 3D Printing
143. Li Xiao-Sheng, Li Long, Zou Shuai (2023-02)
     Developing Low-pH 3D Printing Concrete Using Solid Wastes
144. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-02)
     Development of a Calcium Sulfoaluminate-Portland Cement Binary System for Twin-Pipe 3D Concrete Printing
145. Giridhar Greeshma, Prem Prabhat, Kumar Shankar (2023-01)
     Development of Concrete Mixes for 3D Printing Using Simple Tools and Techniques
146. Chu Shaohua, Yang En-Hua, Unluer Cise (2023-01)
     Development of Nanofiber-Reinforced Reactive Magnesia-Based Composites for 3D Printing
147. Dams Barrie, Chen Binling, Shepherd Paul, Ball Richard (2023-01)
     Development of Cementitious Mortars for Aerial Additive Manufacturing
148. Peng Yiming, Unluer Cise (2022-12)
     Development of Alternative Cementitious Binders for 3D Printing Applications:
     A Critical Review of Progress, Advantages and Challenges
149. Shanmugan S., Sandhyarani T., Palani Subbaiya (2022-12)
     Development of 3D Concrete Printing Using Additive Manufacturing Processes for Construction and Building Industry
150. Zhao Shun, Wang Qiang, Fang Xinjun, Liang Wei et al. (2022-12)
     Application and Development of Autonomous Robots in Concrete Construction:
     Challenges and Opportunities
151. Liu Kewei, Meng Qingfei, Kong Qingzhao, Zhang Xihong (2022-11)
     Review on the Developments of Structure, Construction Automation, and Monitoring of Intelligent Construction
152. García-Alvarado Rodrigo, Moroni-Orellana Ginnia, Banda Pablo (2022-10)
     Development of Variable Residential Buildings with 3D Printed Walls
153. Xiao Jianzhuang, Duan Zhenhua (2022-10)
     Latest Development of 3D Printing Adopting Recycled Aggregate
154. Mortada Youssef, Mohammad Malek, Mansoor Bilal, Grasley Zachary et al. (2022-09)
     Development of Test-Methods to Evaluate the Printability of Concrete Materials for Additive Manufacturing
155. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2022-09)
     Robot-Assisted Flow-Production-Processes Tool-Development for the Fabrication of Thin-Walled Fiber-Reinforced Concrete Elements
156. Game Daniel, Giwa Ilerioluwa, Ahmed Hassan, Noorvand Hassan et al. (2022-09)
     Development of Ultra-High-Performance Engineered Cementitious Composites for 3D Printing Applications
157. Lee Dongyoun, Hong Junho (2022-08)
     Development of an Adaptive Slicing Algorithm of Laminated Object Manufacturing Based 3D Printing for Freeform Formwork
158. Pham Thi, Nguyen Thu, Trinh Thanh, Nguyen Anh et al. (2022-08)
     Development of 3D Printers for Concrete Structures:
     Mix Proportion Design Approach and Laboratory Testing
159. Nishijo Keisuke, Ohno Motohiro, Ishida Tetsuya (2022-06)
     Development of Cementitious Metamaterial with Compressive Strain-Hardening Characteristics
160. Kamakshi Tippabhotla, Subramaniam Kolluru (2022-06)
     Developing Printable Fly-Ash-Slag Geopolymer Binders with Rheology Modification
161. Barbosa Marcella, Anjos Marcos, Cabral Kleber, Souza Dias Leonardo (2022-05)
     Development of Composites for 3D Printing with Reduced Cement Consumption
162. Wang Lining, Aslani Farhad, Mukherjee Abhijit (2022-04)
     Development of 3D Printable Self-Sensing Cementitious Composites
163. Ma Guowei, Buswell Richard, Silva Wilson, Wang Li et al. (2022-03)
     Technology Readiness:
     A Global Snapshot of 3D Concrete Printing and the Frontiers for Development
164. Adams Thomas, Heuer Christoph, Brell-Cokcan Sigrid (2022-03)
     Dynamic 3D Print-Head for Spatial Strand-Extrusion of Fiber-Reinforced Concrete:
     Requirements, Development and Application
165. Břoušek Josef, Petr Tomas, Beran Leoš, Myslivec Tomáš et al. (2022-03)
     Robotic Arm-Design, Development and Control for Printing Cement-Mixtures
166. Guamán-Rivera Robert, Martínez-Rocamora Alejandro, García-Alvarado Rodrigo, Muñoz-Sanguinetti Claudia et al. (2022-02)
     Recent Developments and Challenges of 3D Printed Construction:
     A Review of Research Fronts
167. Zöller Raphael, Ochlast Andreas, Zimmert Florian, Braml Thomas (2022-02)
     Development of Processes for the Automated Planning and Production of Individual Reinforced Concrete Elements
168. Hojati Maryam, Li Zhanzhao, Memari Ali, Park Keunhyoung et al. (2022-01)
     3D Printable Quaternary-Cementitious-Materials Towards Sustainable Development:
     Mixture Design and Mechanical Properties
169. Castano-Alvarez Ruben, Calderon-Uriszar-Aldaca Iñigo, Marcos Ignacio (2021-12)
     Applicability of Existing Models for the Strength Development of 3D Printed Thixotropic Concretes During Hardening
170. Yin Jian, Suo Yiru, Lv Tao, Ma Kaisi et al. (2021-12)
     Application of 3D Printing Technology in the Construction Industry and Its Development Prospects
171. Jones Scott, Hipp Julie, Allen Andrew, Gagnon Cedric (2021-12)
     Rheology and Microstructure Development of Hydrating-Tricalcium-Silicate:
     Implications for Additive Manufacturing in Construction
172. Wanasinghe Dimuthu, Aslani Farhad, Ma Guowei (2021-12)
     Development of 3D Printable Cementitious Composite for Electromagnetic Interference Shielding
173. Nespor B., Bohac M., Nejedlik M. (2021-11)
     Development of Rapid-Set Mortar for Additive Manufacturing
174. Lyu Fuyan, Zhao Dongliang, Hou Xiaohui, Sun Li et al. (2021-10)
     Overview of the Development of 3D Printing Concrete:
     A Review
175. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Gawady Mohamed (2021-09)
     Developing Mix Proportions for Class C Fly-Ash-Based Alkali-Activated 3D Printed Concrete Mixtures
176. Zahabizadeh Behzad, Segundo Iran, Pereira João, Freitas Elisabete et al. (2021-08)
     Development of Photocatalytic 3D Printed Cementitious Mortars:
     Influence of the Curing, Spraying Time-Gaps and TiO2 Coating Rates
177. Zhang Yifan, Aslani Farhad (2021-08)
     Development of Fiber-Reinforced Engineered Cementitious Composite Using Polyvinyl-Alcohol-Fiber and Activated Carbon-Powder for 3D Concrete Printing
178. Putten Jolien, Rahul Attupurathu, Schutter Geert, Tittelboom Kim (2021-08)
     Development of 3D Printable Cementitious Composites with the Incorporation of Polypropylene Fibers
179. Forcael Eric, Pérez Javier, Vásquez Álvaro, García-Alvarado Rodrigo et al. (2021-08)
     Development of Communication Protocols Between BIM Elements and 3D Concrete Printing
180. Hack Norman, Bahar Mohammad, Hühne Christian, Lopez William et al. (2021-06)
     Development of a Robot-Based Multi-Directional Dynamic Fiber Winding Process for Additive Manufacturing Using Shotcrete 3D Printing
181. Li Hui, Meng Huamin, Lan Mingzhang, Zhou Jian et al. (2021-05)
     Development of a Novel Material and Casting-Method for In-Situ Construction on Mars
182. Brooks Adam, Zhou Hongyu (2021-04)
     Developing 3D Printable Lightweight Functional Cementitious Composite
183. Ghourchian Sadegh, Butler Marko, Krüger Markus, Mechtcherine Viktor (2021-04)
     Modelling the Development of Capillary Pressure in Freshly 3D Printed Concrete Elements
184. Ning Xin, Liu Tong, Wu Chunlin, Wang Chao (2021-04)
     3D Printing in Construction:
     Current Status, Implementation Hindrances, and Development Agenda
185. Teixeira João, Schaefer Cecília, Rangel Bárbara, Alves Jorge et al. (2021-03)
     Development of 3D Printing Sustainable Mortars Based on a Bibliometric Analysis
186. Meurer Maximilian, Claßen Martin (2021-02)
     Mechanical Properties of Hardened 3D Printed Concretes and Mortars:
     Development of a Consistent Experimental Characterization-Strategy
187. Sauter Andreas, Nasirov Aslan, Fidan Ismail, Allen Michael et al. (2020-11)
     Development, Implementation and Optimization of a Mobile 3D Printing Platform
188. Dubov Alexey, Ruben Sam (2020-11)
     Material Development Standards and Methods for Additive Manufacturing in Construction to Meet Building Code Requirements for Certification
189. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2020-10)
     Development of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete for Digital Construction
190. Chu Shaohua, Li Leo, Kwan Albert (2020-09)
     Development of Extrudable High-Strength Fiber-Reinforced Concrete Incorporating Nano-Calcium-Carbonate
191. Xiao Jianzhuang, Zou Shuai, Yu Ying, Wang Yu et al. (2020-09)
     3D Recycled Mortar Printing:
     System-Development, Process-Design, Material-Properties and On-Site-Printing
192. Wang Yu, Li Shuaishuai, Qin Tian, Yu Ying et al. (2020-07)
     Concrete 3D Printing:
     System Development, Process Planning and Experimental Results
193. Yuan Qiang, Zhou Dajun, Huang Hai, Peng Jianwei et al. (2020-06)
     Structural Build-Up, Hydration and Strength Development of Cement-Based Materials with Accelerators
194. Federowicz Karol, Kaszyńska Maria, Zieliński Adam, Hoffmann Marcin (2020-06)
     Effect of Curing Methods on Shrinkage Development in 3D Printed Concrete
195. Claßen Martin, Ungermann Jan, Sharma Rahul (2020-05)
     Additive Manufacturing of Reinforced Concrete:
     Development of a 3D Printing Technology for Cementitious Composites with Metallic Reinforcement
196. Jo Jun, Jo Byung, Cho Woohyun, Kim Jung-Hoon (2020-03)
     Development of a 3D Printer for Concrete Structures:
     Laboratory Testing of Cementitious Materials
197. Verian Kho, Kowaleski Scott, Carli Matthew, Bright Randall et al. (2020-02)
     Properties of 3D Printing Mortar with the Development of a 3D Construction Printing Delivery System
198. Gopani Aagam, Shah Parshva, Shah R. (2020-01)
     Developing and Analyzing Mix-Design for 3D Printable Concrete
199. Silva Guido, Quispe L., Kim Suyeon, Nakamatsu Javier et al. (2019-11)
     Development of a Stabilized Natural Fiber-Reinforced Earth Composite for Construction Applications Using 3D Printing
200. Albar Abdulrahman, Swash Mohammad, Ghaffar Seyed (2019-10)
     The Design and Development of an Extrusion-System for 3D Printing Cementitious Materials
201. Kim Kwan, Yeon Jaeheum, Lee Hee (2019-08)
     Strength Development Characteristics of SBR-Modified Cementitious Mixtures for 3D Concrete Printing
202. Zhu Binrong, Pan Jinlong, Nematollahi Behzad, Zhou Zhenxin et al. (2019-07)
     Development of 3D Printable Engineered Cementitious Composites with Ultra-High Tensile Ductility for Digital Construction
203. Meng Xiangcheng, Zhang Xueqing (2019-07)
     Case-Study-Analysis for Development-Strategies of Construction 3D Printing
204. Xu Yading, Šavija Branko (2019-06)
     Development of Strain-Hardening Cementitious Composite (SHCC) Reinforced with 3D Printed Polymeric Reinforcement:
     Mechanical Properties
205. Liu Gaojie, Bai Erlei, Xu Jinyu, Wang Tengjiao et al. (2019-05)
     Research Status and Development Prospect of 3D Printing Concrete Materials
206. Chen Yu, Li Zhenming, Figueiredo Stefan, Çopuroğlu Oğuzhan et al. (2019-04)
     Limestone and Calcined-Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing:
     A Fundamental Study of Extrudability and Early-Age Strength Development
207. Kreiger Eric, Kreiger Megan, Case Michael (2019-04)
     Development of the Construction Processes for Reinforced Additively Constructed Concrete
208. Zahabizadeh Behzad, Cunha Vítor, Pereira João, Gonçalves Claúdia (2019-03)
     Development of Cement-Based Mortars for 3D Printing Through Wet Extrusion
209. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-02)
     Development of Powder-Based 3D Concrete Printing Using Geopolymers
210. Fiske Michael, Edmunson Jennifer, Weite Edward, Fikes John et al. (2018-09)
     The Disruptive Technology That Is Additive Construction:
     System Development Lessons Learned for Terrestrial and Planetary Applications
211. Lindemann Hendrik, Gerbers Roman, Ibrahim Serhat, Dietrich Franz et al. (2018-09)
     Development of a Shotcrete 3D Printing (SC3DP) Technology for Additive Manufacturing of Reinforced Freeform Concrete Structures
212. Liu Jingkuang, Li Guokai (2018-08)
     Research on the Development of 3D Printing Construction Industry Based on Diamond-Model
213. Ogura Hiroki, Nerella Venkatesh, Mechtcherine Viktor (2018-08)
     Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D Printing
214. Kumar Sanjay (2018-06)
     Process Chain Development for Additive Manufacturing of Cemented Carbide
215. Sarakinioti Maria, Turrin Michela, Konstantinou Thaleia, Tenpierik Martin et al. (2018-03)
     Developing an Integrated 3D Printed Façade with Complex Geometries for Active Temperature-Control
216. Kajzr Daniel, Beran Leoš, Záda Václav (2017-10)
     Development of a Robotic Arm Suitable for Demonstration of Advanced Control Methods
217. Kumar Nitish, Hack Norman, Dörfler Kathrin, Walzer Alexander et al. (2017-06)
     Design, Development and Experimental Assessment of a Robotic End-Effector for Non-Standard Concrete Applications
218. Wörner Mark, Schmeer Daniel, Schuler Benjamin, Pfinder Julian et al. (2016-12)
     The Technology of Graded Concrete:
     From the Development of Concrete Mixtures and the Conceptual Design to the Automatized Manufacturing
219. Werkheiser Niki, Edmunson Jennifer, Fiske Michael, Khoshnevis Behrokh (2015-09)
     On the Development of Additive Construction Technologies for Application to Development of Lunar/Martian Surface Structures Using In-Situ Materials
220. Michel Matthias, Knaack Ulrich (2014-12)
     Fundamentals of Development for Adaptive Formwork for Free Formed Concrete Shells and Walls
221. Ding Lieyun, Wei Ran, Che Haichao (2014-12)
     Development of a BIM-Based Automated Construction System
222. Gardiner James, Janssen Steven (2014-05)
     FreeFab:
     Development of a Construction-Scale Robotic Formwork 3D Printer
223. Jeon Kwang-Hyun, Park Min-Beom, Kang Min-Kyung, Kim Jung-Hoon (2013-11)
     Development of an Automated Freeform Construction System and Its Construction Materials
224. Thangavelu Madhu, Khoshnevis Behrokh, Carlson Anders, Leach Neil (2012-09)
     Architectural Concepts Employing Co-Robot-Strategy and Contour Crafting Technologies for Lunar Settlement Infrastructure Development
225. Rael Ronald, Fratello Virginia (2011-10)
     Developing Concrete Polymer Building Components for 3D Printing
226. Lim Sungwoo, Buswell Richard, Le Thanh, Wackrow Rene et al. (2011-07)
     Development of a Viable Concrete Printing Process
227. Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
     Developments in Construction-Scale Additive Manufacturing Processes
228. Khoshnevis Behrokh, Bodiford Melanie, Burks Kevin, Ethridge Ed et al. (2005-01)
     Lunar Contour Crafting:
     A Novel Technique for ISRU-Based Habitat Development