#optimization¶

Keywords by Co - Occurrence¶

#print (186) #concrete (149) #design (63) #structure (56) #topology (45)

1. Driouich Anas, Dalconi Maria, Franchin Giorgia, Bettanini Carlo et al. (2026-01)
   Optimization of Alkali-Activated Regolith Simulants for Lunar Construction by 3D Printing
2. Liao Minmao, Sun Xiao, Chen Zhaohui (2026-01)
   Simultaneous Topology and Path Optimization for 3D Concrete Printing Based on Discrete Frame Structures
3. Cojocari Iulia, Martins Mirna, Rangel Bárbara, Cunha Jaime (2026-01)
   Scaling 3D Printing for Large-Scale Production by Optimising Workflow
4. Lapusan Ciprian, Negrutiu Camelia, Sosa Ioan (2026-01)
   Multi-Criteria Decision Framework for Optimal Robotic System Selection in 3D Concrete Printing
5. Alvarez Eduardo, Curth Alexander, Mueller Caitlin, Norford Leslie (2026-01)
   Enhancing the Dynamic Thermal Performance of Wall Components Through Shape Optimization:
   Method and Application to Extruded Blocks and 3D-Printed Walls
6. Murali Gunasekaran, Kravchenko Ekaterina, Yuvaraj Divya, Avudaiappan Siva (2025-12)
   Next-Generation Green Construction:
   3D-Printed Geopolymer Concrete with Optimized Rheology, Mechanical Performance, and Environmental Efficiency
7. Huang Bo, Liu Chang, Sun Junbo, Wang Yufei et al. (2025-12)
   Optimized Synergy of Fiberglass Mesh and PP Fibers-Modified Structural Adhesive for Enhanced Mechanical and Microstructural Performance in 3D Printing Concrete
8. Bang Jin, Ha Seong, Jun Yubin, Yim Hong (2025-12)
   Optimal Casting Window Defined by Electrical Resistivity for Enhancing Interfacial Bond Strength in 3D Printed-Cast Concrete Composites
9. Cárdenas Valeria, Vargas Juan, Fantucci Stefano (2025-12)
   Topological Optimization and Material Exploration for Improving the Thermal Performance of 3D Printed Prefabricated Wall Components
10. Latorraca Tássia, Rangel Bárbara, Guimarães Ana (2025-12)
    Optimizing 3D-Printed Concrete Panels’ Thermal Performance with Materials, Metrics, and Generative Design
11. Shaik Khaja, Perumalla Mallikarjun, Boilla Charan (2025-12)
    Topology Optimization with Experimental-Numerical Investigation of 3D-Printed Concrete Elements
12. Subramaniam Kolluru, Maganty Sohanth, Kamakshi Tippabhotla, Ghandhi Dhruv et al. (2025-12)
    Design and Deployment of a Functionally Efficient 3D-Printed Concrete Bridge Developed by Form Optimization
13. Si Wen, Khan Mehran, McNally Ciaran (2025-11)
    Rheological Optimization and Mechanical Performance Assessment of High-Volume GGBS-Silica Fume Mortars for 3D Printing
14. Wang Zherui, Teitelbaum E., Akbarzadeh Masoud, Aviv D. (2025-11)
    Experimental Assessment on Thermal Mass Performance of Structurally Optimized, 3D-Printed Concrete Floor Element for Carbon Emission Reduction
15. Abbas Yassir, Alsaif Abdulaziz (2025-11)
    Explainable Data-Driven Modeling for Optimized Mix Design of 3D-Printed Concrete:
    Interpreting Nonlinear Synergies Among Binder Components and Proportions
16. Anastassiou Richard, Alvarado Rodrigo, Wegertseder Martínez Paulina (2025-11)
    Towards Climatomorphism:
    A Generative Optimization Framework for Climate-Adaptive 3D-Printed Free-Form Housing
17. Geng Renyu, Jiang Jinming, Du Pengcong, Zhang Huiliang et al. (2025-11)
    Multiscale Thermal Optimization of 3D-Printed Walls:
    Integrating Structure, Material, and Process with Fire-Thermal Synergy
18. Najm-Eddine Asmae, Abouelmajd Mohamed, Najm-Eddine Youssef, Erritali Ilham et al. (2025-11)
    Topological Optimization in 3D Concrete Printing Structures:
    A Review
19. Baah Thomas, Kim Heejeong, Latypov Marat (2025-11)
    Multi-Objective Adaptive Experimental Approach for Optimizing 3D Concrete Printing Mixtures and Parameters Incorporating Construction and Demolition Waste for Sustainable Construction
20. Abidi Imene, Tuna Meral, Carboni Biagio, Trovalusci Patrizia (2025-11)
    A Parametric Study on Topology Optimization of Additively Manufactured Clay Materials
21. Khalid Lawand, Mermerdaş Kasım, Ekmen Şevin, Khidhir Bzeni Dillshad (2025-11)
    Optimization of Fresh and Hardened Properties of Fiber-Reinforced 3D Printed Geopolymer Composites Using Response Surface Methodology:
    A Data-Driven Approach Based on Prior Experimental Studies
22. Sun Yuhang, Li Chuang, Liu Xiongfei, Wang Li et al. (2025-11)
    Enhancing Sulfate Resistance of Spray-Based 3D Printed Recycled Tunnel Slag Concrete Through Polypropylene Fiber Optimization
23. Nair Sajitha, Nagarajan Praveen, Thampi Santosh, Das Sudha et al. (2025-10)
    Life Cycle-Based Sustainability Assessment of Optimized 3D Printable Concrete Mixes Incorporating Scms and Recycled Aggregates
24. Mostert Jean-Pierre, Kruger Jacques (2025-10)
    Numerically Optimised Filament Surface Topology Towards Maximum Bond Strength in 3D Printed Concrete
25. Zhi Yefan, Akbarzadeh Masoud (2025-10)
    Surface-Toolpath Twins of Shell Components in 3D Concrete Printing for Optimized Buildability and Surface Quality
26. Müller Niklas, Claßen Martin (2025-10)
    Additive Manufacturing of Topology-Optimized Lightweight Slabs Using Foam Concrete
27. Wang Hailong, Song Xinlei, Shen Wenbin, Sun Xiaoyan et al. (2025-10)
    Evaluation and Optimization of 3D-Printed Concrete Based on Flowability Considering Printability and Micro-Pore Characteristics
28. Mesoudy Mouad, Foulki Rida, Amegouz Driss (2025-10)
    3D Concrete Printing:
    Optimizing the Design of Interlocking 3D Printed Concrete Blocks for Fast and Sustainable Construction
29. Albostami Asad, Mohammad Malek, Ismael Bashar, Hamd Rwayda (2025-10)
    Optimized Strength Predictions for 3D Printed Fiber-Reinforced Concrete:
    Machine Learning-Driven Insights
30. Ye Fan, Ren Xiaodan (2025-10)
    A Eulerian Circuit-Based Reinforcement Learning Path Optimization Method for 3D Concrete Printing
31. Jamifar Vahid, Eskandari‐Naddaf Hamid, Dehestani Mehdi (2025-10)
    Optimizing Electric Arc Furnace Dust Utilization in 3D Printed Reinforced Cement Paste Using D‐Optimal Design of Experiments and Gray Wolf Optimization
32. Simwanda Lenganji, David Abayomi, Gatheeshgar Perampalam, Olalusi Oladimeji et al. (2025-10)
    Optimisation of Interlayer Bond Strength in 3D-Printed Concrete Using Response Surface Methodology and Artificial Neural Networks
33. Sedighi Saeed, Rahai Alireza, Moodi Faramarz (2025-10)
    Multi-Criteria Optimization for Sustainable Concrete Mix Considering the Synergistic Effect of Recycled Steel Fiber and LC3 Concrete
34. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa (2025-10)
    Next-Generation Net-Zero Composite for Underwater 3D Printing Construction:
    Hybrid Machine Learning Optimized LC3 with Recycled Rubber
35. Sakha Mahsa, Raza Saim, Wang Xiaomeng, Fan Haifeng et al. (2025-10)
    Design Optimization and Assessment of Stay-in-Place 3D Printed Concrete Formwork for Slabs
36. Wan Qian, Wang Li, Huang Xiaodong, Wu Hao et al. (2025-10)
    Shape Optimization Based on Isogeometric Analysis for 3D Concrete Printing:
    A Design Method for Printing-Friendly Structure
37. Subramaniam Kolluru, Singh Prashant, Maganty Sohanth, Paritala Spandana (2025-10)
    Form Optimization Applications of 3D Concrete Printing:
    From Bridge to Protective Structures
38. Yang Xinrui, Lakhal Othman, Belarouci Abdelkader, Merzouki Rochdi (2025-10)
    Adaptive Velocity Compensation for Optimal 3D Concrete Printing in Uncontrolled Environments
39. Rahman Mahfuzur, An Dong, Rawat Sanket, Yang Richard et al. (2025-09)
    Development of Green 3D Printable Cementitious Composites Using Multi-Response Optimisation Method
40. Akter Usmi, Rezvi Syed, Ratul Md., Kishor Saad (2025-09)
    Optimization of Data-Driven Ensemble Models Using Firefly Algorithm for Enhanced 3D Printed Concrete Strength Prediction
41. Jesus Manuel, Dias Ricardo, Teixeira João, Delgado João et al. (2025-09)
    Optimisation of 3D Printable Cement- and Lime-Based Mortars for Built Heritage Rehabilitation
42. Si Wen, Hopkins Ben, Khan Mehran, McNally Ciaran (2025-09)
    Towards Sustainable Mortar:
    Optimising Sika-Fiber Dosage in Ground Granulated Blast Furnace Slag and Silica Fume Blends for 3D Concrete Printing
43. Liu Ruiqing, Du Hongjian (2025-09)
    Optimizing Thermal Insulation Through Geometric Design:
    Comparative Analysis of Normal and Lightweight 3D Printed Concrete Wall Patterns
44. Kim-Tackowiak Hajin, Carstensen Josephine (2025-09)
    Topology Optimization of 3D-Printed Material Architectures:
    Testing Toolpath Consideration in Design
45. Leong Wai (2025-09)
    Structural Optimization and Performance Evaluation of Spain's 3D-Printed Concrete Bridges Using AI-Based Design Approaches
46. Li Fuhai, Xiao Sai, Yang Bo, Li Kepu et al. (2025-09)
    Mechanical Properties and Anisotropy of 3D-Printed Concrete Modified with Multiscale Materials Based on Optimized Printing Process Design
47. Bhagat Rajesh, Pande Prashant, Madurwar Kamlesh, Raut Jayant et al. (2025-09)
    Life Cycle Assessment of 3D-Printed Building Materials Towards Sustainability-Driven Optimization and Environmental Impact Analysis Using Computational Intelligence Techniques
48. Liu Shijie, Liu Tong, Alqurashi Muwaffaq, Abdou Elabbasy Ahmed et al. (2025-09)
    Advancing 3D-Printed Fiber-Reinforced Concrete for Sustainable Construction:
    A Comparative Optimization Based Study of Hybrid Machine Intelligence Models for Predicting Mechanical Strength and CO₂ Emissions
49. Sahu Akshay, Sharma Deepak, Panda Biranchi (2025-09)
    Tailoring Topology-Optimized Lightweight Concrete Beam Design for Additive Manufacturing
50. Wang Xiaoqi, Liu Xing, Xu Yanling, Cao Jianfu et al. (2025-08)
    A General Adaptive Layer Height Continuous Path Planning Algorithm for Concrete 3D Printing of Complex Porous Structures Based on Multi-Objective Optimization and Reinforcement Learning
51. Baritakis Mario, Traine Phillip, Granzow Jan, Döbert Christine (2025-08)
    3D-Printed Clay Formwork for Topology:
    Optimized Concrete Elements
52. Yang Shuai, Li Fei, Lu Ya, Xu Xiaoming et al. (2025-08)
    Study of the Printing Characteristics of a 3D Printing Solution for the Purpose of Process Optimization
53. Wang Cheinfei, Lian Junyin, Fang Yunhui, Fan Guangming et al. (2025-08)
    Rheological Optimization of 3D-Printed Cementitious Materials Using Response Surface Methodology
54. Lin Xing-Tao, Xu Shuhao, Chen Xiangsheng (2025-08)
    Optimization of Building Structures Based on Additive Manufacturing:
    A Review
55. Liu Zhixin, Si Liang, Liu Yebao, Li Mingyang et al. (2025-08)
    Optimization of Printing Parameters Based on Computational Fluid Dynamics for Uniform Filament Mass Distribution at Corners in 3D Cementitious Material Printing
56. Vico Lujano Raúl, Pérez Villarejo Luis, Novais Rui, Hidalgo-Torrano Pilar et al. (2025-07)
    Optimized Mortar Formulations for 3D Printing:
    A Rheological Study of Cementitious Pastes Incorporating Potassium-Rich Biomass Fly Ash Wastes
57. Wang Jiakang, Anwar Muhammad, Zhu Xingyi, Zhang Yating et al. (2025-07)
    Robust Optimization of Formulation Ratios for the Mechanical, Microstructural and Printing Performance of Cost-Effective 3D Printing Geopolymer
58. Pan Keheng, Cheng Yinhan, Qu Guangfei, Yuan Zheng et al. (2025-07)
    Development and Optimization of Geopolymer-Based 3D Printing Materials Utilizing Industrial Solid Waste:
    Rheological Properties and Practical Applications
59. Yousaf Arslan, Khan Shoukat, Koç Muammer (2025-07)
    Material, Process, and Design Optimization of Local Earthen Soil Reinforced with Natural Fiber Waste and Nanoclay for 3DP of Functional Structures
60. Gerges Isabelle, Farraj Faten, Youssef Nicolas, Antczak Emmanuel et al. (2025-07)
    Methodologies to Design Optimum 3D Printable Mortar Mix:
    A Review
61. Zafar Muhammad, Javadnejad Farid, Hojati Maryam (2025-07)
    Optimizing Rheological Properties of 3D Printed Cementitious Materials via Ensemble Machine Learning
62. Saelens Lien, Tittelboom Kim, Wan-Wendner Roman, Caspeele Robby (2025-07)
    Experimental and Numerical Quantification of the Structural Capacity of Hybrid 3D Printed and Cast Concrete Beams After Topology Optimization
63. Chen Yanjuan, Cheikh Khadija, Rahier Hubert (2025-07)
    Methodology for the Design and Optimization of Potassium Silicate-Activated Slag Used as the Binder of 3D Printable Materials
64. Dong Wei, Zhang Changmin, Wang Junfeng, Zhang Xinjie et al. (2025-07)
    Optimal Design of Mix Proportions for 3D Printed Concrete with Ferrochrome Slag and Aeolian Sand
65. Pierre Maxime, Ghabezloo Siavash, Dangla Patrick, Mesnil Romain et al. (2025-06)
    Multiphysics Modelling of 3D Concrete Printing:
    From Material Model to Process Simulation and Optimisation
66. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
    Enhancing the Mix Design in 3D Concrete Printing Through Systematic Optimization Process
67. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-06)
    Mix Design Optimization of 3D-Printed Cementitious Composites for Marine Applications:
    Impact of Binder Composition, Accelerated Carbonation, and PVA Fibers on Strength and Durability
68. Gasmi Abrar, Guessasma Mohamed, Davidovits Ralph, Pélegris Christine (2025-06)
    Unveiling Additive Effects in 3D Printed Geopolymer Composites:
    A Multi-Scale Analysis Coupling Rheological Insights and CFD-Optimized Deposition
69. Noaimat Yazeed, Chougan Mehdi, Sambucci Matteo, Valente Marco et al. (2025-06)
    Optimising Limestone Calcined Clay Cement Containing Excavated Low-Grade Waste Clay for 3D Printing Applications
70. Hanifa Mohamad, Mendonça Paulo, Figueiredo Bruno, Mahdy Deena (2025-06)
    Experimental Study on the Thermal Performance of 3D-Printed Earthen Wall Segment with Optimized Infill Pattern
71. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-06)
    Enhancing Interfacial Bonding and Pore Structure Optimization in 3D-Printed High-Strength ECC with Steel-PE Hybrid Fibers
72. Sakha Mahsa, Raza Saim, Wang Xiaomeng, Fan Haifeng et al. (2025-06)
    Assessment of Post-Tension Capacity in Novel 3D-Printed Topology:
    Optimized Formwork via Load Transfer Testing
73. Sonebi Mohammed, Kaushik Sandipan, Amziane Sofiane, Hamill Gerard (2025-06)
    Optimization of Rheological and Hardened Properties of 3D Concrete Printing
74. Rückrich Stefanie, Austern Guy, Denay Ofer, Seiwert Paul et al. (2025-05)
    3D-Printed Earth-Fiber Envelopes:
    Optimization of Thermal Performance and Industrial Applicability
75. Qi Pengfei, Wang Ziyuan, Yu Ruifang, Pei Qiang et al. (2025-05)
    Optimization Design and Regression Model Analysis of Mechanical Properties of 3D Printed Concrete
76. Santhosh S., Raphael Benny, Santhanam Manu (2025-05)
    Concrete 3D Printing of Shape-Optimized Lattice Beams Incorporating Nature-Inspired Patterns
77. Zhu Wenxuan, Liu Chao, Zhang Yu, Zhang Yunsheng et al. (2025-05)
    Rheological Performance Regulation and Material Optimization of Manufactured Sand Concrete in 3D Printing
78. Sun Yifan, Ma Siqi, Chen Qingze, Chen Guoliang et al. (2025-04)
    Lunar Regolith Simulant-Derived 3D-Printed Geopolymers with Optimized Mechanical and Thermal Management Properties
79. Dörrie Robin, Gantner Stefan, Amiri Fatemeh, Lachmayer Lukas et al. (2025-04)
    From Digital to Real:
    Optimised and Functionally Integrated Shotcrete 3D Printing Elements for Multi-Storey Structures
80. Qiao Zhigang, Li Hui, Wang Fei, Qi Yongle et al. (2025-04)
    Optimizing Thermal Energy Storage in 3D Printed Concrete with Hollow Ceramsite Composite Phase Change Materials
81. Campos Guilherme, Lunelli Pietro, Moraes Elisângela, Souza Marcelo et al. (2025-04)
    Optimization of Clay-Based Ceramic Mixtures with Sugarcane Bagasse Fiber for 3D Printing
82. Salaimanimagudam M., Jayaprakash Jaganathan (2025-04)
    Synergistic Potential of Topology Optimization and Lattice Structures in Concrete 3D Printed Beams
83. Noaimat Yazeed, Chougan Mehdi, Seidy Eslam, Albar Abdulrahman et al. (2025-04)
    Optimizing Limestone Calcined Clay Cement for Enhanced 3D Printing Performance of Low-Carbon Materials
84. Maralapalle Vedprakash, Kumavat Hemraj, Nadaf Maheboobsab, Zende Aijaz et al. (2025-04)
    Optimizing 3D Geopolymer Concrete for Sustainable Construction:
    A Review of Material Selection, Printing Methods, and Properties
85. Lin Yuxin, Bayramvand Alireza, Meibodi Mania (2025-04)
    Towards Lightweight Structure:
    Coupling Topology Optimization with Non-Planar 3D Concrete Printing
86. Shi Ye, Han Li, Wu Pengtao, Dai Kaichao et al. (2025-04)
    Design of 3D Printing Green Ultra-High Performance Concrete Based on Binder System Optimization
87. Jin Willy, Ouellet-Plamondon Claudiane, Caron Jean-François (2025-03)
    Multi-Objective Optimization of a Sustainable LC3 Mortar for 3D Printing
88. Nassrullah Ghaith, Ali Mohd, Rub Rashid, Cho Cung-Suk et al. (2025-03)
    Optimizing Cement-Based Material Formulation for 3D Printing:
    Integrating Carbon Nanotubes and Silica Fume
89. Yang Kun, Yuan Jingbo, Wang Yibo, Yang Fan et al. (2025-03)
    Optimization of 3D Printing Nozzle Structure and the Influence of Process Parameters on the Forming Performance of Underwater Concrete
90. Mesnil Romain, Rosa Pedro, Demont Léo (2025-03)
    Thickness Optimisation in 3D Printed Concrete Structures
91. Wang Qiang, Yang Wenwei, Wang Li, Bai Gang et al. (2025-03)
    Reinforcement Design and Structural Performance for the Topology Optimized 3D Printed Concrete Truss Beams
92. Zafar Muhammad, Shahid Adnan, Sedghi Reza, Hojati Maryam (2025-03)
    Optimization of Biopolymer Additives for 3D Printable Cementitious Systems:
    A Design of Experiment Approach
93. Liu Xiongfei, Guo Pei, Wang Haonan, Zhang Yi (2025-03)
    Spray-Based 3D Printed Cementitious Electromagnetic Wave Absorption Materials:
    Optimization with Structures Design
94. Zargar Seyed, Leicht Robert, Wagner Alan, Duarte José et al. (2025-01)
    Beyond Trial and Error:
    Toward Construction-Aware Early Design-Optimization Considering Robotic Capabilities
95. Baş Sercan, Aydın Ozan, Bundur Zeynep, Guven Gursans (2025-01)
    Building Information Modeling (BIM)-Based On-Site 3D Printer Position-Optimization and Path-Planning for Digital Fabrication
96. Schossler Rodrigo, Ullah Shafi, Alajlan Zaid, Yu Xiong (2025-01)
    Data-Driven Analysis in 3D Concrete Printing:
    Predicting and Optimizing Construction Mixtures
97. Bahoria Boskey, Bhagat Rajesh, Pande Prashant, Raut Jayant et al. (2024-12)
    Design-Optimization of 3D Printed Concrete Elements Considering Life Cycle Assessment and Life Cycle Costing
98. Jin Willy, Caron Jean-François, Ouellet-Plamondon Claudiane (2024-11)
    Minimizing the Carbon Footprint of 3D Printing Concrete:
    Leveraging Parametric LCA and Neural Networks Through Multi-Objective-Optimization
99. Wang Qingwei, Han Song, Yang Junhao, Li Ziang et al. (2024-11)
    Optimizing Printing and Rheological Parameters for 3D Printing with Cementitious Materials
100. Reddy Swami, Shariff Najeeb, Nanthagopalan Prakash (2024-11)
     Topology-Optimization of 3D Concrete Printed Columns Considering Material-Anisotropy
101. He Yuxiang, Robens-Radermacher Annika, Noda Sakiko, Wolf Christoph et al. (2024-11)
     Automated Workflows for Concrete Additive Manufacturing for Design, Optimization, and Fabrication of Parametrized Elements
102. Wang Bolin, Yang Min, Liu Shilong, Liu Xianda et al. (2024-10)
     Research on Mechanical Properties of a 3D Concrete Printing Component-Optimized Path by Multi-Modal Analysis
103. Hoang Pham, Moon Hyosoo, Ahn Yonghan (2024-10)
     Optimizing 3D Printed Concrete Mixtures for Extraterrestrial Habitats:
     A Machine Learning Framework
104. Oliveira Francisco, Picelli Sanches Renato, Nelli Silva Emílio, Barari Ahmad et al. (2024-10)
     Topology-Optimization in 3D Concrete Printing to Reduce Greenhouse Gas Emissions
105. Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2024-09)
     Data-Driven Design-Process and Production of Stress-Optimized Concrete Girders with Integrated Tendons Using 3D Printing
106. Shakur Emad, Shaked Adaya, Amir Oded (2024-09)
     Topology and Shape-Optimization of 3D Pre-Stressed Concrete Structures
107. Curth Alexander, Pearl Natalie, Wissemann Emily, Cousin Tim et al. (2024-09)
     EarthWorks:
     Zero-Waste 3D Printed Earthen Formwork for Shape-Optimized, Reinforced Concrete Construction
108. Andreou Vasilis, Kontovourkis Odysseas (2024-09)
     Formwork-Optimization for Complex 3D Concrete Printing:
     A Unified Theoretical, Digital, and Experimental Framework
109. Licen Jurij, Chen Taole (2024-09)
     Use of Genetic Optimization-Algorithms in the Design of 3D Concrete Printed Shell-Structures
110. Farra Ramzi, Mazanec Oliver, Ducoulombier Nicolas, Mallet Alban (2024-09)
     Toward the Optimal Use of Local Cementitious Materials Through Novel Admixture-Technology and a Dedicated 2K-Printing-System
111. Kromoser Benjamin, Gappmeier Peter, Ahmed Iyad, Reichenbach Sara (2024-09)
     A New Approach for Automated Design and Robot-Assisted Production of Structurally Optimised Reusable Concrete Building Elements
112. Song Xinlei, Sun Xiaoyan, Wang Hailong (2024-09)
     Determination of Optimal Flowability of 3D Printing Concrete Based on Multi-Objective Optimization Method
113. Wolf Christoph, Robens-Radermacher Annika, Unger Jörg (2024-09)
     Optimization Framework for Large-Scale Powder-Bed 3D Printed Concrete Structures Under Various Constraints
114. Migliorino Jenna, Ahmed Aly, Mackin Anthony, Hanoun Zaid et al. (2024-09)
     Topology-Optimization-Based Additive Construction for Sustainability
115. Alencar Oliveira Francisco, Picelli Sanches Renato, Barari Ahmad, Oliveira Romano Roberto et al. (2024-09)
     Greenhouse Gases Emission Reduction Trough Topology-Optimization and 3D Printing
116. Mesnil Romain, Sarkis Rosa Pedro, Caron Jean-François (2024-09)
     Thickness-Optimization of 3D Printed Structures Considering Structural Failure
117. Zhang Nan, Sanjayan Jay (2024-09)
     Rheological Modifiers in Optimizing Quick Nozzle Mixing Technology for 3D Concrete Printing
118. Jin Willy, Ouellet-Plamondon Claudiane, Caron Jean-François (2024-09)
     Multi-Objective-Optimization of a Sustainable Ternary Mortar for 3D Printing
119. Park Gwang, Kim Jae (2024-09)
     Optimization Shape Stability for Printed Pre-Cast Column Using Matric-Suction-Effect
120. Wüchner Roland, Warnakulasuriya Suneth, Asl Reza, Bletzinger Kai-Uwe et al. (2024-09)
     Free-Form Structural Optimization for Additive Manufacturing in Construction
121. Amicarelli Fabio, Lloret-Fritschi Ena (2024-09)
     Optimising Concrete Slabs with Paper Formworks
122. Hanifa Mohamad, Figueiredo Bruno, Mahdy Deena, Mendonça Paulo et al. (2024-08)
     Continuum Optimization of 3D Printed Self-Supported Shell:
     Hybrid Strategy for Crafting Ribbed System
123. Bono Victor, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2024-08)
     Design, Structural Optimization and Fabrication of Concrete Shell Through Fiber-Reinforced 3D Printing
124. Licen Jurij, Chen Taole (2024-08)
     Fabrication-Aware Design for 3DCP Shells Using Genetic Optimization
125. Rudziewicz Magdalena, Maroszek Marcin, Setlak (nee Pławecka) Kinga, Góra Mateusz et al. (2024-08)
     Optimization of Foams-Polypropylene Fiber-Reinforced Concrete Mixtures Dedicated for 3D Printing
126. Liu Xiongfei, Cai Huachong, Sun Yuhang, Wang Li et al. (2024-08)
     Spray-Based 3D Printed Foam-Concrete:
     Cooperative Optimization for Lightweight and High-Strength Performance
127. Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-08)
     Evaluation and Optimization of Micro-Calcium-Carbonate-Modified 3D Printed Rubber-Crumb Concrete
128. Jia Lutao, Niu Geng, Dong Enlai, Jiang Yifan et al. (2024-08)
     Optimization-Strategy for Incorporating Recycled Brick-Powder in 3D Printed Concrete by Balancing Low-Carbon Footprint and Enhanced Performance
129. Markovic Ivan, Horat Alexandra, Pantellini Danilo (2024-07)
     Optimization of Earth-Based Mixtures in Terms of 3D Printability and Mechanical Properties:
     Feasibility Study
130. Şahin Hatice, Mardani Ali, Mardani Naz (2024-07)
     Performance Requirements and Optimum Mix Proportion of High-Volume Fly-Ash 3D Printable Concrete
131. Duarte Gonçalo, Brown Nathan, Duarte José (2024-07)
     Workflow for Generating, Simulating, and Optimizing Form and Tool-Path in 3D Concrete Printing of Vaults
132. Salaimanimagudam M., Jayaprakash Jaganathan (2024-06)
     Optimal Selection of Cable-Reinforcement for Concrete 3D Printed Lattice-Beam
133. Ndarowa Tariro, Mahachi Jeffrey, Ikotun Bolane (2024-06)
     A Review of Optimization of Limestone and Calcined-Clay-Cement Concrete Mixtures for 3D Printing
134. Zhuang Zicheng, Xu Fengming, Ye Junhong, Hu Nan et al. (2024-06)
     A Comprehensive Review of Sustainable Materials and Tool-Path-Optimization in 3D Concrete Printing
135. Liu Xiongfei, Zhao Xi, Wang Nan, Zhang Yi et al. (2024-05)
     Powder-Based 3D Printed Magnesium Phosphate Cement:
     Mechanical Isotropy Optimization Using Borax
136. Vargas José, Sjölander Andreas, Westerlind Helena, Silfwerbrand Johan (2024-05)
     Internal Topology-Optimization of 3D Printed Concrete Structures:
     A Method for Enhanced Performance and Material-Efficiency
137. Lu Ming, Wu Hao, Yuan Philip (2024-05)
     Optimization for Industrial Robot Joint Movement in Non-Horizontal 3D Printing Application
138. Roux Charlotte, Archez Julien, Gall Corentin, Saadé Myriam et al. (2024-04)
     Towards Sustainable Material:
     Optimizing Geopolymer Mortar Formulations for 3D Printing
139. Cutajar Sacha, Dielemans Gido, Krakovská Ema, Dorresteijn Evelien et al. (2024-04)
     Up-Scaling Earth Formworks:
     3D Printing-Strategies for Material-Optimized Reinforced Concrete Structures
140. Wang Yibo, Ren Changzai, Yan Ming, Ao Chenyang (2024-04)
     Blockage-Mechanism-Analysis and Optimization Design of 3D Concrete Print-Head
141. Curth Alexander, Alvarez Eduardo, Feickert Kiley, Mueller Caitlin et al. (2024-04)
     Multi-Material Fabrication for Low-Carbon Construction:
     An Optimised Floor System for Affordable Housing in Mexico
142. Zhang Hongping, Duan Shuni, Han Qi, He Qiangqiang et al. (2024-03)
     Strength and Proportioning Design of 3D Printed Concrete (3DPC) Based on Aggregate-Gradation-Optimization
143. Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-03)
     Optimization of Fiber-Reinforced Lightweight Rubber-Concrete Mix-Design for 3D Printing
144. Liu Xiongfei, Wang Nan, Zhang Yi, Ma Guowei (2024-02)
     Optimization of Printing Precision and Mechanical Property for Powder-Based 3D Printed Magnesium Phosphate Cement Using Fly-Ash
145. Geng Songyuan, Luo Qiling, Cheng Boyuan, Li Lixao et al. (2024-02)
     Intelligent Multi-Objective Optimization of 3D Printing Low-Carbon Concrete for Multi-Scenario Requirements
146. Silva Guido, Quispe Axcel, Baldoceda Jordan, Kim Suyeon et al. (2024-02)
     Additive Construction of Concrete Deep Beams Using Low-Cost Characterization Methods and FEM-Based Topological Optimization
147. Jiang Xiongzhi, Li Yujia, Yang Zhe, Li Yangbo et al. (2024-02)
     Harnessing Path-Optimization to Enhance the Strength of Three-Dimensional Printed Concrete
148. Li Yu, Wu Hao, Xie Xinjie, Zhang Liming et al. (2024-02)
     FloatArch:
     A Cable-Supported, Unreinforced, and Re-Assemblable 3D Printed Concrete Structure Designed Using Multi-Material Topology-Optimization
149. Alyami Mana, Khan Majid, Javed Muhammad, Ali Mujahid et al. (2023-12)
     Application of Metaheuristic Optimization Algorithms in Predicting the Compressive Strength of 3D Printed Fiber-Reinforced Concrete
150. Maitenaz Sébastien, Mesnil Romain, Féraille Adélaïde, Caron Jean-François (2023-12)
     Materialising Structural Optimization of Reinforced Concrete Beams Through Digital Fabrication
151. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2023-12)
     Methodology for Formulating Low-Carbon Printable Mortar Through Particles-Packing-Optimization
152. Ambily Parukutty, Kaliyavaradhan Senthil, Sebastian Shilpa, Shekar Deepadharshan (2023-12)
     Mixing Approach for 3D Printable Concrete:
     Method of Addition and Optimization of Superplasticizer Dosage
153. Suthar Mahendrabhai, Shariff Najeeb, Nanthagopalan Prakash (2023-12)
     Performance-Assessment of Topologically Optimised 3D Printable Concrete Sewer Cross-Section Using Finite Element Simulation
154. Coward Andy, Sørensen Jesper (2023-12)
     3D Printed Concrete Beams as Optimised Load Carrying Structural Elements:
     The Minimass Beam
155. Ambily Parukutty, Rajendran Neeraja, Kaliyavaradhan Senthil (2023-11)
     Mix-Design, Optimization and Performance-Evaluation of Extrusion-Based 3D Printable Concrete
156. Yang Wenwei, Wang Li, Hu Yuanyuan, Sanjayan Jay et al. (2023-10)
     An Integrated Topology-Optimization Method Including Manufacturing-Constraints for 3D Printed Fiber-Reinforced Concrete Structures
157. Briels David, Renz Mauritz, Nouman Ahmad, Straßer Alexander et al. (2023-10)
     Monolithic AM Façade:
     Multi-Objective Parametric Design-Optimization of Additively Manufactured Insulating Wall Elements
158. Conrad John, Spencer Lawson, Amador Robert, Linnehan Tyler et al. (2023-09)
     Concrete Printed Gyroid Column:
     A Structurally Optimized, Sand Layer Supported Printing Method
159. Jewett Jackson, Carstensen Josephine (2023-09)
     Topology-Optimization for Material-Extrusion-Based Additive Manufacturing-Processes with Weak Bead Bonding
160. Jendele Libor, Rymeš Jiří, Červenka Jan (2023-09)
     Optimizing Digital 3D Printing of Concrete Structures
161. Fragnito Andrea, Iasiello Marcello, Mauro Gerardo, Menna Costantino et al. (2023-08)
     Topology-Optimization to Design Innovative High Thermal Resistance 3D Printed Walls
162. Mogra Mihir, Asaf Ofer, Sprecher Aaron, Amir Oded (2023-08)
     Design-Optimization of 3D Printed Concrete Elements Considering Buildability
163. Chen Quanyao, Gao Yuyue, Ding Lieyun, Cheng Zhou et al. (2023-07)
     Genetic Algorithm-Based Multiobjective Optimization for 3D Printable Design of a Double-Shell Lunar-Habitat-Structure
164. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2023-07)
     Design-Optimization Workflow for 3D Concrete Printing of Spanning Structures
165. Sergis Vasileios, Ouellet-Plamondon Claudiane (2023-06)
     An Optimum Mix-Design Method for 3D Concrete Printing Applications
166. Yang Wenwei, Wang Li, Ma Guowei, Feng Peng (2023-06)
     An Integrated Method of Topological-Optimization and Path-Design for 3D Concrete Printing
167. Pressmair Nadine, Kromoser Benjamin (2023-06)
     Development-Stages of Structurally Optimized Concrete Girders:
     Design-Concepts, Material-Strategies and Experimental Investigation
168. Wang Li, Ye Kehan, Wan Qian, Li Zhijian et al. (2023-05)
     Inclined 3D Concrete Printing:
     Build-Up Prediction and Early-Age Performance-Optimization
169. Şahin Hatice, Temel Müge, Mardani Ali (2023-04)
     Determination of Optimum VMA Utilization Dosage in Cementitious Systems:
     In Terms of Rheological and Flowability Properties
170. Chaiyotha Danai, Kantawong Watcharapong, Payakanitia Panjasila, Pinitsoontorn Supree et al. (2023-03)
     Finding Optimized Conditions for 3D Printed High-Calcium Fly-Ash-Based Alkali-Activated Mortar
171. Huber Tobias, Burger Joris, Mata-Falcón Jaime, Kaufmann Walter (2023-03)
     Structural Design and Testing of Material-Optimized Ribbed RC Slabs with 3D Printed Formwork
172. Ma Guowei, Hu Tingyu, Wang Fang, Liu Xiongfei et al. (2023-02)
     Magnesium Phosphate Cement for Powder-Based 3D Concrete Printing:
     Systematic Evaluation and Optimization of Printability and Printing Quality
173. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Das Utpal et al. (2023-02)
     Optimization of Mix Proportion of 3D Printable Mortar Based on Rheological Properties and Material-Strength Using Factorial Design of Experiment
174. Xia Lingwei, Bi Minghao, Wu Jie, Wang Fang et al. (2023-01)
     Integrated Lightweight Design-Method via Structural Optimization and Path-Planning for Material-Extrusion
175. Zahrani Abdullah, Alghamdi Abdulrahman, Basalah Ahmad (2022-12)
     Computational Optimization of 3D Printed Concrete Walls for Improved Building Thermal Performance
176. Choo Joshua, Mohammed Bashar, Chen Pei-Shan, Abdulkadir Isyaka et al. (2022-12)
     Modeling and Optimizing the Effect of 3D Printed Origami-Bubble-Aggregate on the Mechanical and Deformation Properties of Rubberized ECC
177. Liu Xiongfei, Li Jixiang, Li Qi, Hou Gunayu (2022-11)
     Mechanical Performance Optimization in Spray-Based Three-Dimensional-Printed Mortar Using Carbon-Fiber
178. Ma Zongfang, Wan Weipeng, Song Lin, Liu Chao et al. (2022-11)
     An Approach of Path-Optimization Algorithm for 3D Concrete Printing Based on Graph-Theory
179. Salaimanimagudam M., Jayaprakash Jaganathan (2022-11)
     Optimum Selection of Reinforcement, Assembly, and Formwork System for Digital Fabrication Technique in Construction Industry:
     A Critical Review
180. Burger Joris, Huber Tobias, Lloret-Fritschi Ena, Mata-Falcón Jaime et al. (2022-10)
     Design and Fabrication of Optimised Ribbed Concrete Floor Slabs Using Large-Scale 3D Printed Formwork
181. Baghdadi Abtin, Dörrie Robin, Kloft Harald (2022-09)
     Optimization of Building Floor Beam Layout by Optimization Algorithms Regarding the Concrete Printing Techniques
182. Li Mingyang, Weng Yiwei, Liu Zhixin, Zhang Dong et al. (2022-09)
     Optimizing of Chemical Admixtures for 3D Printable Cementitious Materials by Central Composite Design
183. Lamnini Soukaina, Elsayed Hamada, Lakhdar Yazid, Baino Francesco et al. (2022-09)
     Robocasting of Advanced Ceramics:
     Ink-Optimization and Protocol to Predict the Printing Parameters
184. Solonina Valentina, Surovtsev I., Butakova M. (2022-09)
     Optimizing the Structure of Construction Mixes for 3D Printing
185. Qian Hao, Hua Sudong, Yue Hongfei, Feng Guiyang et al. (2022-09)
     Utilization of Recycled Construction-Powder in 3D Concrete Printable Materials through Particle-Packing-Optimization
186. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2022-09)
     Topology-Optimization of Structural Beam Systems considering 3D Concrete Printing Technology-Constraints
187. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-07)
     Automating Mix-Design for 3D Concrete Printing Using Optimization Methods
188. Liu Xiongfei, Li Qi, Wang Fang, Ma Guowei (2022-07)
     Systematic Approach for Printability Evaluation and Mechanical Property Optimization of Spray-Based 3D Printed Mortar
189. Briels David, Kollmannsberger Stefan, Leithner Felicitas, Matthäus Carla et al. (2022-07)
     Thermal Optimization of Additively Manufactured Lightweight Concrete Wall Elements with Internal Cellular Structure through Simulations and Measurements
190. Tošić Zlata, Eichenauer Martin, Ivaniuk Egor, Lordick Daniel et al. (2022-07)
     Design and Optimization of Free-Form Surfaces for Modular Concrete 3D Printing
191. Aziz Saqib, Kim Ji-Su, Stephan Dietmar, Gengnagel Christoph (2022-06)
     Generative Structural Design:
     A Cross-Platform Design and Optimization Workflow for Additive Manufacturing
192. Galé Benjamin, Ursenbacher Thierry, Petit Agnès, Bourquin Vincent (2022-06)
     Shotcrete 3DCP Projection-Angle and Speed-Optimization:
     Experimental Approaches and Theoretical Modelling
193. Menna Costantino, Esposito Laura (2022-06)
     Flexural Behavior of Steel-Reinforced Topology-Optimised Beams Fabricated by 3D Concrete Printing
194. Ooms Ticho, Vantyghem Gieljan, Tao Yaxin, Bekaert Michiel et al. (2022-06)
     The Production of a Topology-Optimized 3D Printed Concrete Bridge
195. Ekanayaka Virama, Lachmayer Lukas, Raatz Annika, Hürkamp André (2022-06)
     Approach to Optimize the Inter-Layer Waiting Time in Additive Manufacturing with Concrete Utilizing FEM Modeling
196. Bi Minghao, Tran Jonathan, Xia Lingwei, Ma Guowei et al. (2022-06)
     Topology-Optimization for 3D Concrete Printing with Various Manufacturing-Constraints
197. Wang Xianggang, Jia Lutao, Jia Zijian, Zhang Chao et al. (2022-06)
     Optimization of 3D Printing Concrete with Coarse Aggregate via Proper Mix-Design and Printing-Process
198. Sergis Vasileios, Ouellet-Plamondon Claudiane (2022-04)
     D-Optimal Design of Experiments Applied to 3D High-Performance Concrete Printing Mix-Design
199. Liu Xiongfei, Li Qi, Li Jixiang (2022-04)
     Shrinkage and Mechanical Properties Optimization of Spray-Based 3D Printed Concrete by PVA-Fiber
200. Nguyen-Van Sy, Gwak Kwan-Woong (2022-03)
     A Two-Nozzle Cable-Driven Parallel Robot for 3D Printing Building Construction:
     Path-Optimization and Vibration Analysis
201. Gebhard Lukas, Burger Joris, Mata-Falcón Jaime, Lloret-Fritschi Ena et al. (2022-03)
     Towards Efficient Concrete Structures with Ultra-Thin 3D Printed Formwork:
     Exploring Reinforcement-Strategies and Optimization
202. Overmeir Anne, Figueiredo Stefan, Šavija Branko, Bos Freek et al. (2022-02)
     Design and Analyses of Printable Strain-Hardening Cementitious Composites with Optimized Particle-Size-Distribution
203. Ayegba Blessing, Egbe King-James, Nazar Ali, Huang Mingzhi et al. (2022-01)
     Resource Efficiency and Thermal Comfort of 3D Printable Concrete Building Envelopes Optimized by Performance Enhancing Insulation:
     A Numerical Study
204. Pastore Tommaso, Menna Costantino, Asprone Domenico (2022-01)
     Bézier-Based Biased Random-Key Genetic Algorithm to Address Printability-Constraints in the Topology-Optimization of Concrete Structures
205. Lachmayer Lukas, Ekanayaka Virama, Hürkamp André, Raatz Annika (2021-11)
     Approach to an Optimized Printing Path for Additive Manufacturing in Construction Utilizing FEM Modeling
206. Orlinski Adam, Rycke Klaas, Heimrath Moritz (2021-11)
     Optimizing Reinforcement
207. Yuan Qiang, Zuo Shenghao, Li Zemin, Shi Caijun et al. (2021-11)
     Optimizing Three-Dimensional Printing Binder Composed of Ordinary-Portland-Cement and Calcium-Sulfoaluminate-Cement with Retarders
208. Blagojevic Boris, Schonemann Benjamin, Nigl David, Blandini Lucio et al. (2021-10)
     Trajectory-Planning for Concrete Element Fabrication with Optimal Control
209. Stoiber Nadine, Kromoser Benjamin (2021-09)
     Pushing Concrete Material-Usage to the Limit:
     Weight-Optimized, 3D Printed Concrete Girders with External Reinforcement
210. Álvarez-Fernández Martina, Prendes-Gero María, González-Nicieza Celestino, Guerrero-Miguel Diego-José et al. (2021-02)
     Optimum Mix-Design for 3D Concrete Printing Using Mining-Tailings:
     A Case Study in Spain
211. Gu Hai, Sun Jianhua, Zhang Jie, Xu Yuanyuan et al. (2020-12)
     Effect of Material-Ratio on the Performances in 3D Cement Printing and Its Optimization
212. Ly Océane, Yoris-Nobile Adrian, Sebaibi Nassim, Blanco-Fernandez Elena et al. (2020-11)
     Optimization of 3D Printed Concrete for Artificial Reefs:
     Biofouling and Mechanical Analysis
213. Sauter Andreas, Nasirov Aslan, Fidan Ismail, Allen Michael et al. (2020-11)
     Development, Implementation and Optimization of a Mobile 3D Printing Platform
214. Papacharalampopoulos Alexios, Bikas Harry, Foteinopoulos Panagis, Stavropoulos Panagiotis (2020-11)
     A Path-Planning-Optimization Framework for Concrete-Based Additive Manufacturing Processes
215. Sterckx Peter, Walker Ian (2020-11)
     Modeling and Design-Optimization of Robotic Hoses for 3D Printing of Cement
216. Phadnis Kedar, Shariff Najeeb, Menon Devdas (2020-09)
     Optimal Rate of Printing of 3D Printed Concrete Columns and Walls to Avoid Buckling
217. Lu Ming, Yuan Philip (2020-08)
     A New Algorithm to Get Optimized Target Plane on Six-Axis Robot for Fabrication
218. Kinomura Koji, Murata Satoshi, Yamamoto Yujin, Obi Hirotoshi et al. (2020-07)
     Application of 3D Printed Segments Designed by Topology-Optimization-Analysis to a Practical-Scale Pre-Stressed Pedestrian Bridge
219. Pastore Tommaso, Menna Costantino, Asprone Domenico (2020-07)
     Combining Multiple Loads in a Topology-Optimization Framework for Digitally Fabricated Concrete Structures
220. Liu Yan, Jewett Jackson, Carstensen Josephine (2020-07)
     Experimental Investigation of Topology-Optimized Deep Reinforced Concrete Beams with Reduced Concrete Volume
221. Maitenaz Sébastien, Mesnil Romain, Onfroy Paul, Metge Nicolas et al. (2020-07)
     Sustainable Reinforced Concrete Beams:
     Mechanical Optimization and 3D Printed Formwork
222. Vantyghem Gieljan, Steeman Marijke, Corte Wouter, Boel Veerle (2020-07)
     Design-Optimization for 3D Concrete Printing:
     Improving Structural and Thermal Performances
223. Toklu Yusuf, Bekdaş Gebrail, Geem Zong (2020-06)
     Harmony-Search-Optimization of Nozzle Movement for Additive Manufacturing of Concrete Structures and Concrete Elements
224. Shahzad Qamar, Wang Xujiang, Wang Wenlong, Wan Yi et al. (2020-06)
     Coordinated Adjustment and Optimization of Setting-Time, Flowability, and Mechanical Strength for Construction 3D Printing Material Derived from Solid Waste
225. Carstensen Josephine (2020-06)
     Topology-Optimization with Nozzle-Size-Restrictions for Material-Extrusion-Type Additive Manufacturing
226. Kontovourkis Odysseas, Phocas Marios, Tryfonos George, Georgiou Christos (2020-05)
     Multi-Axis 3D Printing of Material-Reduced Shell-Structures on a Reconfigurable Supporting-System Using Topology-Optimization Principles
227. Liu Zhixin, Li Mingyang, Weng Yiwei, Qian Ye et al. (2020-03)
     Modelling- and Parameter-Optimization for Filament-Deformation in 3D Cementitious Material-Printing Using Support-Vector-Machine
228. Vantyghem Gieljan, Corte Wouter, Shakour Emad, Amir Oded (2020-01)
     3D Printing of a Post-Tensioned Concrete Girder Designed by Topology-Optimization
229. Yassin Abdallah, Hamzeh Farook, Sakka Fatima (2019-12)
     Agent-Based Modeling to Optimize Workflow of Robotic Steel and Concrete 3D Printers
230. Kruger Jacques, Cho Seung, Zeranka Stephan, Vintila Cristian et al. (2019-12)
     3D Concrete Printer Parameter Optimization for High-Rate Digital Construction Avoiding Plastic Collapse
231. Zhang Chao, Hou Zeyu, Chen Chun, Zhang Yamei et al. (2019-09)
     Design of 3D Printable Concrete Based on the Relationship Between Flowability of Cement-Paste and Optimum Aggregate-Content
232. Vantyghem Gieljan, Corte Wouter, Steeman Marijke, Boel Veerle (2019-07)
     Density-Based Topology-Optimization for 3D Printable Building Structures
233. Kontovourkis Odysseas, Tryfonos George, Georgiou Christos (2019-06)
     Robotic Additive Manufacturing (RAM) with Clay Using Topology-Optimization Principles for Tool-Path-Planning:
     The Example of a Building Element
234. Bong Shin, Nematollahi Behzad, Nazari Ali, Xia Ming et al. (2019-03)
     Method of Optimization for Ambient Temperature Cured Sustainable Geopolymers for 3D Printing Construction Applications
235. Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
     Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing
236. Battaglia Christopher, Miller Martin, Zivkovic Sasa (2018-09)
     Sub-Additive 3D Printing of Optimized Double Curved Concrete Lattice Structures
237. Søndergaard Asbjørn, Feringa Jelle, Stan Florin, Maier Dana (2018-09)
     Realization of Topology Optimized Concrete Structures Using Robotic Abrasive Wire-Cutting of Expanded Polystyrene Formwork
238. Vantyghem Gieljan, Boel Veerle, Corte Wouter, Steeman Marijke (2018-09)
     Compliance, Stress-Based and Multi-Physics Topology-Optimization for 3D Printed Concrete Structures
239. Coenders Jeroen, Mathot Maarten, Martens Pascal, Bos Freek et al. (2017-12)
     Optimizing 3D Concrete Printing:
     Exploring Potentials and Limitations of Materials and Production
240. Shakor Pshtiwan, Renneberg Jarred, Nejadi Shami, Paul Gavin (2017-07)
     Optimization of Different Concrete Mix Designs for 3D Printing by Utilizing 6DOF Industrial Robot
241. Kashani Alireza, Ngo Tuan (2017-07)
     Optimization of Mixture-Properties for 3D Printing of Geopolymer Concrete
242. Martens Pascal, Mathot Maarten, Bos Freek, Coenders Jeroen (2017-06)
     Optimizing 3D Printed Concrete Structures Using Topology Optimization
243. Jipa Mihail-Andrei, Bernhard Mathias, Meibodi Mania, Dillenburger Benjamin (2016-11)
     3D Printed Stay-in-Place Formwork for Topologically Optimized Concrete Slabs
244. Duballet Romain, Gosselin Clément, Roux Philippe (2015-10)
     Additive Manufacturing and Multi-Objective Optimization of Graded Polystyrene-Aggregate Concrete Structures
245. Krause Martin, Otto Jens, Bulgakov Alexey, Sayfeddine Daher (2015-07)
     Strategic Optimization of 3D Concrete Printing Using the Method of CONPrint3D®
246. Zhang Jing, Khoshnevis Behrokh (2012-09)
     Optimal Machine Operation Planning for Construction by Contour Crafting
247. Zhang Jing, Khoshnevis Behrokh (2009-06)
     Contour Crafting Process Planning and Optimization