#influence¶

Keywords by Co - Occurrence¶

#print (142) #concrete (103) #property (63) #cement (41) #mechanics (40)

1. Chourasia Ajay, Pal Biswajit, Kapoor Ashish, Kumar R. (2026-04)
   Influence of Mix Constituents on the Printability and Compressive Strength of Binary and Ternary Cementitious Composite Made of Agro-Industrial Waste
2. Taj Khalilullah, Reid Laraimie, Su Yen-Fang (2026-04)
   Environmental Influence on the Smart Self-Sensing 3D-Printed Concrete Column
3. Baghdadi Abtin, Kloft Harald (2026-04)
   Influence of Concrete Printing Techniques and Geometry on Shear-Compressive Capacity of Dry Concrete Joints
4. Brunner Kim, Kostner Julia, Weger Daniel, Stengel Thorsten et al. (2026-03)
   Durability of Additively Manufactured SPI Components:
   Influence of Layer-Related Microstructural Characteristics
5. Zia Syed, Yuan Yong, Irfan ul Hassan Muhammad, Sheng Ruyi et al. (2026-03)
   Influence of Sugarcane Bagasse Ash on the Workability and Mechanical Behaviour of 3D-Printed Mortar
6. Khalil Jawad, Fakih Amin, Yaseen Zaher, Osta Mohammed et al. (2026-02)
   Influence of Chemical Components and Molar Ratios on Strength Development of One-Part Alkali-Activated Mortar: Ensemble Machine Learning Models
7. Berdini Daniele, Donnini Jacopo, Cognoli Roberto, Galasso Marco et al. (2026-02)
   Influence of Recycled Aggregates on Fresh and Hardened Properties of 3D Printable Concrete Mix
8. Liu Fang, Wang Haiwei, Zheng Xinchao, Hu Xueting et al. (2026-02)
   Study on the Workability and Mechanical Influencing Factors of 3D-Printed Coal Gangue-Fly Ash-Based Geopolymers
9. Javan Kazem, Chaggar Pooja, Darestani Mariam, Markhali Bijan et al. (2026-02)
   Workability of Geopolymer Concrete and Mortar Materials: A Systematic Review of Influencing Parameters and Optimization for Sustainable Construction Materials
10. Feng Lei, Chen Nuo, Wen Xiaodong (2026-01)
    Influence of Process Parameters on Interlayer Interface Mechanical Properties of 3D Printing Fiber Reinforced Concrete
11. Kligys Modestas, Girskas Giedrius, Baltuškiene Daiva (2026-01)
    Influence of the Amount of Mineral Additive on the Rheological Properties and the Carbon Footprint of 3D-Printed Concrete Mixtures
12. Robens-Radermacher Annika, Schmidt Wolfram, Unger Jörg, Mezhov Alexander (2026-01)
    Characterization of Temperature Influence on the Structural Build-Up of 3D Printed Concrete
13. Mudi Charitha, Gupta Souradeep, Basithali E. (2026-01)
    Influence of Engineered Natural Fiber Reinforcement in 3D Printed Earth-Based Cementitious Composites:
    Fresh and Hardened Properties
14. Bharti Mrityunjay, Menon Arun, Santhanam Manu (2026-01)
    Experimental Study of Hardened Properties of 3D-Printed Concrete Under Compression, Tension and Shear Considering Interlayer Influence
15. Liu Xingzi, Buswell Richard, Cavalaro Sergio, Xu Jie et al. (2026-01)
    Influence of Inter-Filament Voids on the Failure Mechanism and Compressive Strength of 3D Printed Concrete
16. Pal Biswajit, Chourasia Ajay, Tomar Milan, Pradeep Kumar (2026-01)
    Influence of Interfilament Bond Characteristics on the Load–Deflection Behavior of 3D Printed Beam:
    A Numerical Study
17. Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
    Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
    A Systematic Review
18. Liu Xianda, Sun Junbo, Chen Hui, Liu Chang et al. (2025-11)
    3D Printed Concrete with Red Mud Incorporation:
    Influence of Red Mud Manufacturing Procedures on Mechanical Properties at Elevated Temperatures
19. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-11)
    Influence of Alternative Supplementary Cementitious Materials and Printing Parameters on the Mechanical Properties of 3D-Printed Mortars
20. Liu Renlong, Cheng Zhangqi (2025-10)
    Interlayer Fracture Properties of 3D-Printed Cement-Based Structures:
    Influencing Factors and Mechanisms
21. Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2025-10)
    Influence of Limestone Calcined Clay on the Mechanical Behaviour of 3D Printed Engineered Cementitious Composites
22. Apsari Auliagitta, Tambusay Asdam, Suprobo Priyo, Suryanto Benny (2025-10)
    Influence of Printing Speed and Nozzle Size on Buildability of 3D Printed Concrete Walls:
    A Nonlinear Finite Element Study
23. Paritala Spandana, Raj Shubham, Singh Prashant, Subramaniam Kolluru (2025-09)
    Designing 3D Printable Concrete by Integrating the Influence of Aggregate Characteristics
24. Liu Renlong, Tang Jiyu, Feng Hu, Cheng Zhangqi (2025-09)
    Study on the Instability of Early Age 3D Printing Cement-Based Structure:
    Considering the Influence of Interface
25. Li Leo, Xiao Bofeng, Kou Shi-cong (2025-09)
    Influences of Fiber Length on the Printability and Strength of Glass Fiber-Reinforced 3D-Printed Mortar
26. Márquez Álvaro, Varela Hugo, Barluenga Gonzalo (2025-09)
    Influence of Rheology Modifying Admixtures on the Buildability of 3D Printing Cement-Based Mortars
27. Barbhuiya Salim, Das Bibhuti, Adak Dibyendu (2025-09)
    Key Variables Influencing the Performance of 3D Printed Concrete:
    A Comprehensive Analysis
28. Shukla Bishnu, Bharti Gaurav, Parashar Bhupender, Sharma Pushpendra et al. (2025-09)
    Variables Influencing the Performance of 3D Concrete Printing for Sustainable Construction:
    Current Status and Future Prospects
29. Kiyani Muhammad, Hussain Syed, Emaan Rajja, Kamal Muhammad et al. (2025-08)
    Influence of Process Parameters on 3D Concrete Printing:
    A Step Towards Standardized Approaches
30. Wang Chaofan, Chen Bing, Wang Yong, Vo Thanh et al. (2025-08)
    Influencing Mechanism of Magnesium-to-Phosphate Ratio on the Rheology and Microstructure Development of 3D-Printed Magnesium Phosphate Cement at Early Hydration
31. Maroszek Marcin, Hager Izabela, Mróz Katarzyna, Sitarz Mateusz et al. (2025-08)
    Anisotropy of Mechanical Properties of 3D-Printed Materials:
    Influence of Application Time of Subsequent Layers
32. Yao Weijing, Gao Yangyunzhi, Huang Xin, Du Hongjian (2025-08)
    Influence of Printing Speed and Extrusion Speed on the Performance and Pore Structures of 3D Printed Mortar
33. Rizzieri Giacomo, Meni Simone, Cremonesi Massimiliano, Ferrara Liberato (2025-07)
    A Particle Finite Element Method for Investigating the Influence of Material and Process Parameters in 3D Concrete Printing
34. Zhou Jimmy, Samarasinghe Don, Rotimi James, Feng Zhenan (2025-06)
    Exploring Policy Influences on the Adoption of 3D Concrete Printing Technology:
    A Hypothetical Model
35. Hermida José, Saavedra Ruth, Hidalgo-Astudillo Samantha, Tošić Nikola et al. (2025-06)
    Influence of Fine Recycled Aggregates on the Properties of 3D Printing Concrete
36. Galeote Eduardo, Claramunt Josep, Hermida José, Fuente Albert (2025-06)
    Influence of Fibers and Iron Dust on the Electrical Conductivity of 3D-Printed Concrete Mixes
37. Zuo Zibo, Huang Yulin, Tao Yaxin, Yong Yuan et al. (2025-06)
    Analysis of Factors Influencing the Maximum Continuous Printing Height of 3D Printed Concrete
38. Cisowski Adam, Kowalik Michał (2025-06)
    The Influence of the Cross-Sectional Geometry on Stress Concentration in 3D Printed Concrete Elements:
    A Preliminary Study
39. Hu Xiangcheng, Shazad Qamar, Li Fangyuan (2025-04)
    Influence of the Shear Span Ratio on the Shear Performance of 3D-Printed Concrete Beams Without Web Reinforcement
40. Zhou Jimmy, Samarasinghe Don, Rotimi James, Feng Zhenan (2025-04)
    Examining Global Policy Influences on the Adoption of 3D Concrete Printing Technology:
    A Roadmap for New Zealand
41. Tseng Kuo-Chang, Chi Maochieh, Yeih Weichung, Huang Ran (2025-04)
    Influence of Slag/Fly Ash as Partial Cement Replacement on Printability and Mechanical Properties of 3D-Printed Concrete
42. Koszela Kamila, Chajec Adrian (2025-03)
    Sustainable Additive Manufacturing:
    How the Composition of the Cementitious Mix Influences Its Fresh Properties
43. Yang Kun, Yuan Jingbo, Wang Yibo, Yang Fan et al. (2025-03)
    Optimization of 3D Printing Nozzle Structure and the Influence of Process Parameters on the Forming Performance of Underwater Concrete
44. Yuan Hanquan, Dong Enlai, Jia Zijian, Jia Lutao et al. (2025-03)
    The Influence of Pore Structure and Fiber Orientation on Anisotropic Mechanical Property of 3D Printed Ultra-High-Performance Concrete
45. Aktürk Büşra, Ertuğrul Onur, Özen Ömer, Oktay Didem et al. (2025-03)
    Influence of Nano-Silica and R-MgO on Rheological Properties, 3D Printability, and Mechanical Properties of One-Part Sodium Carbonate-Activated Slag-Based Mixes
46. Shahzad Qamar, Li Fangyuan (2025-03)
    Influence of Concrete Interfaces on the Damage and Pull-Out Behavior of 3D-Printed Concrete Structures
47. Zhang Bo, Zhang Yi, Ye Yihang, Hao Lulu et al. (2025-02)
    Influence of Contacts in 2D Infill Patterns on Mechanical Properties of 3D Printed Concrete Structures
48. Chourasia Ajay, Pal Biswajit, Kapoor Ashish (2025-02)
    Influence of Printing Direction and Interlayer Printing Time on the Bond Characteristics and Hardened Mechanical Properties of Agro-Industrial Waste-Based 3D Printed Concrete
49. Rudziewicz Magdalena, Maroszek Marcin, Hutyra Adam, Góra Michał et al. (2025-02)
    Influence of Foaming Agents and Stabilizers on Porosity in 3D Printed Foamed Concrete
50. Srinivas Dodda, Panda Biranchi, Suraneni Prannoy, Sitharam Thallak (2025-01)
    Influence of Mixture-Composition and Carbonation-Curing on Properties of Sustainable 3D Printable Mortars
51. Chen Wei, Guan Yongying, Zhu Binrong, Han Jinsheng et al. (2025-01)
    Influence of Extruded Strip-Shape and Dimension on the Mechanical Properties and Pore-Characteristics of 3D Printed Geopolymer Concrete
52. Vlieger Jentel, Blaakmeer Jan, Gruyaert Elke, Cizer Özlem (2025-01)
    Assessing Static and Dynamic Yield-Stress of 3D Printing Mortar with Recycled Sand:
    Influence of Sand-Geometry, Fineness Modulus, and Water-to-Binder Ratio
53. Wang Hailong, Shen Wenbin, Sun Xiaoyan, Song Xinlei et al. (2025-01)
    Influences of Particle-Size on the Performance of 3D Printed Coarse Aggregate Concrete:
    Experiment, Microstructure, and Mechanism Analysis
54. Omur Tarik, Akpunar Ahmet, Bingöl Ayşe, Oktay Büşra et al. (2025-01)
    The Influence of Phase-Change-Material Filled Three-Dimensional Printed Artificial Aggregates on the Properties of Blast-Furnace-Slag Based Alkali-Activated Concrete
55. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-12)
    Influence of the Nozzle Geometry on Mechanical Properties of 3D Printed Concrete:
    Experiment and Finite Element Study
56. Ge Yali, Yao Jie (2024-11)
    Influence of FA and HPMC on the Fresh Properties and Anisotropy of 3D Printing Engineered Cementitious Composites
57. Kosson Michael, Brown Lesa, Thorne Garret, Sanchez Florence (2024-11)
    Influence of Internal Architecture and Ink Formulation on the Thermal Behavior of 3D Printed Cementitious Materials
58. Taleb Maria, Bulteel David, Montagne Alex, Roudet Francine et al. (2024-11)
    Influence of Thermo-Hygrometric Conditions on the Interface Bond in 3D Printed Concrete
59. Seo Eun-A, Lee Hojae (2024-10)
    Influence of Chemical Admixtures on Buildability and Deformation of Concrete for Additive Manufacturing
60. Flor Juncal Luis, Loporcaro Giuseppe, Scott Allan, Clucas Don (2024-10)
    Influence of Printing-Parameters on the Durability of 3D Printed Limestone-Calcined-Clay-Cement Mortar:
    Overlap Between Filaments and Nozzle-Offset
61. Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Han Jinsheng et al. (2024-09)
    Influence of Waste-Glass-Powder on Printability and Mechanical Properties of 3D Printing Geopolymer Concrete
62. Liu Xiaoshuang, Li Shiming, Duan Yanjun, Du Zhiqin et al. (2024-09)
    Influence of Printing Interval on the Imbibition Behavior of 3D Printed Foam-Concrete for Sustainable and Green Building Applications
63. Harbouz Ilhame, Alam Syed, Loukili Ahmed (2024-09)
    Influence of Printing Parameters on Early-Age Shrinkage in 3D Printed Mortar
64. Mohan Manu, Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-09)
    Influence of Temperature Variations on the Performance of Two-Component 3D Printable Mixtures
65. Shen Wenbin, Wang Hailong, Sun Xiaoyan (2024-09)
    Influence of Coarse Aggregates on the Performance of 3D Printing Concrete
66. Muy Yeakleang, Courard Luc, Bulteel David, Rémond Sébastien et al. (2024-09)
    Influence of Nozzle-Diameter on the Anisotropy of Compressive Strength:
    Measured on 3D Printing Concrete Designed with Recycled Fine Aggregates
67. Joon Hillar, Peetrimägi Lauri (2024-09)
    Influence of Illitic Calcined Clay on Properties of Mixtures for 3D Concrete Printing
68. Dörrie Robin, David Martin, Freund Niklas, Lowke Dirk et al. (2024-09)
    Surface Processing of Shotcrete 3D Printed Concrete Elements Using a Rotating Trowel Disc:
    Influence of Timing on Resulting Surface Quality
69. Kurup Davya, Rahul Attupurathu (2024-09)
    Early-Age Shrinkage Measurement in 3D Printed Con-Crete by Digital Image Correlation:
    Influence of Spray Paints
70. Wei Yazhi, Zhang Hui (2024-09)
    Influence of Temperature and Humidity on Mechanical Properties of Calcined-Oyster-Shell-Powder-Modified 3D Printed Concrete
71. Thajeel Marwah, György L. (2024-08)
    Hardened Properties of 3D Printed Concrete Influenced by Anisotropy
72. Buschmann Birger, Henke Klaudius, Asshoff Carsten, Talke Daniel et al. (2024-08)
    Additive Manufacturing of Wood-Composite-Parts by Individual Layer Fabrication:
    Influence of Process Parameters on Product Properties
73. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2024-07)
    Influence of Curing Conditions on the Shrinkage Behavior of Three-Dimensional Printed Concrete Formwork
74. Luo Qiling, Yu Ke-Ke, Long Wujian, Zheng Shuyi et al. (2024-07)
    Influence of Different Types of Superabsorbent Polymers on Fresh Mechanical Properties and Inter-Layer Adhesion of 3D Printed Concrete
75. Wu Yiwen, Liu Chao, Liu Huawei, Bai Guoliang et al. (2024-07)
    Mechanism of the Influence of Multi-Scale Pore-Structure on the Triaxial Mechanical Properties of 3D Printed Concrete with Recycled Sand
76. Gonzales Betty, Zavaleta Diana, Bertolotti Bruno, Aguilar Rafael et al. (2024-07)
    Comprehensive Investigation into the Influence of Soil Composition and Water Content on Cracking Due to Drying Shrinkage in 3D Printed Earthen Structures
77. Chen Zhaohui, Wang Zhenyue, Liao Minmao, Sun Junbo et al. (2024-07)
    Influence of Printing-Pattern on Bearing-Capacity of 3D Printed Concrete Hollow Structures
78. Sovetova Meruyert, Calautit John (2024-07)
    Influence of Printing Parameters on the Thermal Properties of 3D Printed Construction Structures
79. To Quoc, Pham Koa, Lee Gayoon, Shin Myoungsu et al. (2024-06)
    Experimental and FEM Evaluation of the Influence of Inter-Layer Bonding Strength in 3D Printed Concrete Members Under Compressive and Flexural Loadings
80. Zhou Zhijie, Geng Jian, Jin Chen, Liu Genjin et al. (2024-06)
    Influence of Residue Soil on the Properties of Fly-Ash-Slag-Based Geopolymer Materials for 3D Printing
81. Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi, Kono Katsuya (2024-06)
    Influence of Print Paths on Mechanical Properties and Fracture Propagation of 3D Printed Concrete
82. Gao Huaxing, Jin Lang, Chen Yuxuan, Chen Qian et al. (2024-05)
    Rheological Behavior of 3D Printed Concrete:
    Influential Factors and Printability Prediction Scheme
83. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2024-05)
    Effect of Time Interval on the Inter-Layer Adhesion of 3D Printed Concrete with Recycled Sand:
    Multi-Factor Influencing Mechanisms and Superabsorbent Polymer Enhancement
84. Raval Amitkumar, Patel C. (2024-05)
    The Influence of Accelerators on Compressive Strength and Setting-Time of Cement to Achieve High Early Strength for 3D Concrete Printing Technology
85. Cavalcante Tiago, Toledo Filho Romildo, Mendoza Reales Oscar (2024-05)
    Influence of Recycled Concrete-Powder on Rheology of Printable Cement-Based Matrixes
86. Silveira Júnior Jairon, Moura Cerqueira Kevin, Moura Ruan, Matos Paulo et al. (2024-04)
    Influence of Time-Gap on the Buildability of Cement Mixtures Designed for 3D Printing
87. Ali Mohd, Nassrullah Ghaith, Al-Rub Rashid, Khaswaneh Bashar et al. (2024-03)
    Influence of Carbon-Nano-Tubes on Printing Quality and Mechanical Properties of 3D Printed Cementitious Materials
88. Shahzad Qamar, Abbas Nadeem, Akbar Muhammad, Sabi Ehab et al. (2024-03)
    Influence of Print-Speed and Nozzle-Diameter on the Fiber-Alignment in 3D Printed Ultra-High-Performance Concrete
89. Shi Yifan, Jia Lutao, Jia Zijian, Ma Lei et al. (2024-03)
    Early-Age Inhomogeneous Deformation of 3D Printed Concrete:
    Characteristics and Influences of Superplasticizer and Water-Binder Ratio
90. Wang Yu, Rodriguez Fabian, Olek Jan, Zavattieri Pablo et al. (2023-11)
    Influence of Type of Fibers on Fresh and Hardened Properties of Three-Dimensional-Printed Cementitious Mortars
91. Zhu Binrong, Wang Yufei, Sun Junbo, Wei Yang et al. (2023-10)
    An Experimental Study on the Influence of Waste-Rubber-Particles on the Compressive, Flexural and Impact Properties of 3D Printable Sustainable Cementitious Composites
92. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-10)
    Influence of Rheology on Mixing Homogeneity and Mechanical Behavior of Twin-Pipe 3D Printable Concrete
93. Paritala Spandana, Kamakshi Tippabhotla, Subramaniam Kolluru (2023-09)
    Influence of Inter-Layer Interfaces on Fracture Behavior of 3D Printed Concrete
94. Chang Ze, Liang Minfei, Chen Yu, Schlangen Erik et al. (2023-09)
    Does Early-Age Creep Influence Buildability of 3D Printed Concrete?:
    Insights from Numerical Simulations
95. Thakur Manideep, Kulkarni Omkar, Kamakshi Tippabhotla, Paritala Spandana et al. (2023-09)
    Influence of Cold Joint on Fracture Behavior of 3D Printed Concrete
96. Luo Fuming, Cui Peng, Tang Wei, Wu Chun-ran et al. (2023-09)
    Influences of Engineering Spoil on the Properties and Microstructure of 3D Printable Magnesium-Cement
97. Ahmadi Khatereh, Mousavi Seyed, Dehestani Mehdi (2023-09)
    Influence of Nano-Coated Micro-Steel-Fibers on Mechanical and Self-Healing Properties of 3D Printable Concrete Using Graphene-Oxide and Polyvinyl-Alcohol
98. Chen Yidong, Zhang Yunsheng, Zhang Yu, Pang Bo et al. (2023-08)
    Influence of Gradation on Extrusion-Based 3D Printing Concrete with Coarse Aggregate
99. Wang Yang, Qiu Liu-Chao, Hu Yan-Ye, Cheng Song-Gui et al. (2023-08)
    Influential Factors on Mechanical Properties and Microscopic Characteristics of Underwater 3D Printing Concrete
100. Zhang Yu, Yang Lin, Qian Rusheng, Liu Guojian et al. (2023-07)
     Inter-Layer Adhesion of 3D Printed Concrete:
     Influence of Layer Stacked Vertically
101. Liu Junli, Tran Jonathan, Nguyen Vuong, Gunasekara Chamila et al. (2023-06)
     3D Printing of Cementitious Mortar with Milled Recycled Carbon-Fibers:
     Influences of Filament Offset on Mechanical Properties
102. Antoni Antoni, Adi N., Kurniawan M., Agraputra A. et al. (2023-06)
     The Influence of Viscosity-Modifying Agent and Calcium-Carbonate on 3D Printing Mortar Characteristics
103. Butkutė Karolina, Vaitkevičius Vitoldas, Šinka Māris, Augonis Algirdas et al. (2023-05)
     Influence of Carbonated-Bottom-Slag-Granules in 3D Concrete Printing
104. Shahzad Qamar, Li Fangyuan (2023-05)
     The Influence of Print-Path on Early-Age Plastic Bearing-Capacity and Mechanical Behavior of 3D Printed Concrete:
     A Novel Approach for Practical Applications
105. Liu Chao, Zhang Yamei, Banthia Nemkumar (2023-05)
     Unveiling Pore Formation and Its Influence on Micromechanical Property and Stress-Distribution of 3D Printed Foam-Concrete Modified with Hydroxypropyl-Methylcellulose and Silica-Fume
106. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-03)
     Influence of Effective Micro-Organisms on the Rheology and Fresh State Properties of SCMs-Based Concrete for Digital Fabrication
107. Chen Yanjuan, Kuva Jukka, Mohite Ashish, Li Zhongsen et al. (2023-03)
     Investigation of the Internal Structure of Hardened 3D Printed Concrete by X-CT Scanning and Its Influence on the Mechanical Performance
108. Ravichandran Darssni, Giridhar Greeshma, Ramamurthy Vignesh, Prem Prabhat (2023-03)
     Influence of Test-Protocol on Determining the Rheological Properties of Cement-Pastes-Mixtures for Concrete 3D Printing
109. Talke Daniel, Saile Bettina, Meier Niklas, Herding Friedrich et al. (2023-03)
     Particle-Bed 3D Printing by Selective Cement-Activation:
     Influence of Process Parameters on Particle-Bed Density
110. Ibrahim Kamoru, Zijl Gideon, Babafemi Adewumi (2023-03)
     Influence of Limestone-Calcined-Clay-Cement on Properties of 3D Printed Concrete for Sustainable Construction
111. Liu Chao, Wang Zhihui, Wu Yiwen, Liu Huawei et al. (2023-02)
     3D Printing Concrete with Recycled Sand:
     The Influence Mechanism of Extruded Pore-Defects on Constitutive Relationship
112. Joon Hillar, Hass Lauri, Peetrimägi Lauri (2023-01)
     Influence of Limestone-Filler on Technological Parameters of Mixtures for 3D Concrete Printing
113. Uddin Md (2022-12)
     Influence of 3D Printable Sustainable Concrete and Industrial Waste on Industry 5.0
114. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Pereira Eduardo et al. (2022-12)
     Influence of the Printing-Direction and Age on the Mechanical Properties of 3D Printed Concrete:
     Correction
115. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-12)
     Influence of the Pore Feature on the Water-Uptake in 3D Printed Concrete
116. Rubin Ariane, Quintanilha Lucas, Repette Wellington (2022-11)
     Influence of Structuration-Rate, with Hydration-Accelerating Admixture, on the Physical and Mechanical Properties of Concrete for 3D Printing
117. Lachmayer Lukas, Böhler David, Freund Niklas, Mai (née Dressler) Inka et al. (2022-11)
     Modelling the Influence of Material and Process Parameters on Shotcrete 3D Printed Strands:
     Cross-Section Adjustment for Automatic Robotic Manufacturing
118. Liu Chao, Chen Yuning, Zhang Zedi, Niu Geng et al. (2022-10)
     Study of the Influence of Sand on Rheological Properties, Bubble Features and Buildability of Fresh Foamed Concrete for 3D Printing
119. Zhang Yu, Zhang Yunsheng, Qian Rusheng, Liu Guojian et al. (2022-09)
     Influence of Steel-Fiber on the Water-Absorption of 3D Printed Concrete
120. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-09)
     3D Printing Concrete with Recycled Coarse Aggregates:
     The Influence of Pore-Structure on Inter-Layer Adhesion
121. Mousavi Seyed, Dehestani Mehdi (2022-08)
     Influence of Latex and Vinyl Disposable Gloves as Recycled Fibers in 3D Printing Sustainable Mortars
122. Gebhard Lukas, Esposito Laura, Menna Costantino, Mata-Falcón Jaime (2022-07)
     Inter-Laboratory Study on the Influence of 3D Concrete Printing Set-Ups on the Bond Behavior of Various Reinforcements
123. Douba Ala, Badjatya Palash, Kawashima Shiho (2022-06)
     Influence of Infill-Pattern on Reactive MgO Printed Structures
124. Das Arnesh, Aguilar Sanchez Asel, Wangler Timothy, Flatt Robert (2022-06)
     Freeze-Thaw-Performance of 3D Printed Concrete:
     Influence of Interfaces
125. Putten Jolien, Smet M., Heede Philip, Schutter Geert et al. (2022-06)
     Influence of the Print Process on the Durability of Printed Cementitious Materials
126. Böhler David, Mai (née Dressler) Inka, Freund Niklas, Lachmayer Lukas et al. (2022-06)
     Influence of Material and Process Parameters on Hardened State Properties of Shotcrete 3D Printed Elements
127. Liu Chao, Chen Yuning, Xiong Yuanliang, Jia Lutao et al. (2022-06)
     Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Buildability of 3D Printing Foam-Concrete:
     From Water State and Flocculation Point of View
128. Kuzmenko Kateryna, Ducoulombier Nicolas, Féraille Adélaïde, Roussel Nicolas (2022-05)
     Environmental Impact of Extrusion-Based Additive Manufacturing:
     Generic Model, Power-Measurements and Influence of Printing-Resolution
129. Elistratkin Michail, Alfimova Nataliya, Podgorniy Daniil, Olisov Andrey et al. (2022-05)
     Influence of Equipment Operation Parameters on the Characteristics of a Track Produced with Construction 3D Printing
130. Liu Huawei, Liu Chao, Bai Guoliang, Wu Yiwen et al. (2022-04)
     Influence of Pore-Defects on the Hardened Properties of 3D Printed Concrete with Coarse Aggregate
131. Zhou Wen, Zhang Yamei, Ma Lei, Li Victor (2022-04)
     Influence of Printing Parameters on 3D Printing Engineered Cementitious Composites
132. Tan Yuan, Dahlenburg Maximilian, Fottner Johannes, Kessler Stephan (2022-04)
     Influencing Factors of the Mixing Performance of a Near-Nozzle Continuous Mixer for 3D Concrete Printing:
     An Analysis Based on Spatial-Lacey-Mixing-Index
133. Huang Xin, Yang Weihao, Song Fangnian, Zou Jiuqun (2022-04)
     Study on the Mechanical Properties of 3D Printing Concrete Layers and the Mechanism of Influence of Printing Parameters
134. Teixeira João, Schaefer Cecília, Maia Lino, Rangel Bárbara et al. (2022-03)
     Influence of Supplementary Cementitious Materials on Fresh Properties of 3D Printable Materials
135. Yalçınkaya Çağlar (2022-03)
     Influence of Hydroxypropyl Methylcellulose Dosage on the Mechanical Properties of 3D Printable Mortars with and without Fiber-Reinforcement
136. Liu Jianan, Wang Zhenjun, Zhao Xin, Yu Cong et al. (2022-03)
     Quantitative Evaluations on Influences of Aggregate Surface Texture on Interfacial Adhesion Using 3D Printing Aggregate
137. Peerzada Abdul, Rangaraju Prasad, Roberts James, Biehl Adam (2022-03)
     Influence of External Vibration on the Gravitational Flow Characteristics of Cementitious Materials:
     A Perspective from Application in Additive Manufacturing
138. Yuan Qiang, Gao Chao, Huang Tingjie, Zuo Shenghao et al. (2022-03)
     Factors Influencing the Properties of Extrusion-Based 3D Printed Alkali-Activated Fly-Ash-Slag Mortar
139. Pham Luong, Lu Guoxing, Tran Jonathan (2022-02)
     Influences of Printing-Pattern on Mechanical Performance of Three-Dimensional-Printed Fiber-Reinforced Concrete
140. Kaushik Sandipan, Sonebi Mohammed, Amato Giuseppina, Perrot Arnaud et al. (2022-02)
     Influence of Nano-Clay on the Fresh and Rheological Behavior of 3D Printing Mortar
141. Ma Guowei, A Ruhan, Xie Panpan, Pan Zhu et al. (2022-01)
     3D Printable Aerogel-Incorporated Concrete:
     Anisotropy Influence on Physical, Mechanical, and Thermal Insulation Properties
142. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2021-11)
     Influence of Substrate-Surface-Roughness and Moisture-Content on Tensile Adhesion Performance of 3D Printable Concrete
143. Liu Xuanting, Sun Bohua (2021-11)
     The Influence of Interface on the Structural Stability in 3D Concrete Printing Processes
144. Shahzad Qamar, Shen Junyi, Naseem Rabia, Yao Yonggang et al. (2021-10)
     Influence of Phase-Change-Material on Concrete Behavior for Construction 3D Printing
145. Ge Zhi, Tawfek Abdullah, Zhang Hongzhi, Yang Yongwei et al. (2021-09)
     Influence of an Extrusion-Approach on the Fiber-Orientation and Mechanical Properties of Engineering Cementitious Composite
146. Zahabizadeh Behzad, Segundo Iran, Pereira João, Freitas Elisabete et al. (2021-08)
     Development of Photocatalytic 3D Printed Cementitious Mortars:
     Influence of the Curing, Spraying Time-Gaps and TiO2 Coating Rates
147. Umar Tariq (2021-08)
     Key Factors Influencing the Implementation of Three-Dimensional Printing in Construction
148. Che Yujun, Tang Shengwen, Yang Huashan, Li Weiwei et al. (2021-08)
     Influences of Air-Voids on the Performance of 3D Printing Cementitious Materials
149. Yang Huashan, Che Yujun, Shi Mengyuan (2021-07)
     Influences of Calcium-Carbonate-Nano-Particles on the Workability and Strength of 3D Printing Cementitious Materials Containing Limestone-Powder
150. Shen Wenkai, Yuan Qiang, Shi Caijun, Ji Youhong et al. (2021-07)
     Influence of Pumping on the Resistivity Evolution of High-Strength Concrete and Its Relation to the Rheology
151. Liu Chao, Wang Xianggang, Chen Yuning, Zhang Chao et al. (2021-06)
     Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Stability, Rheological Properties, and Printability of 3D Printing Foam-Concrete
152. Sambucci Matteo, Valente Marco (2021-06)
     Influence of Waste-Tire-Rubber-Particles-Size on the Microstructural, Mechanical, and Acoustic Insulation Properties of 3D Printable Cement Mortars
153. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Pereira Eduardo et al. (2021-03)
     Influence of the Printing-Direction and Age on the Mechanical Properties of 3D Printed Concrete
154. Rutzen Matthias, Lauff Philipp, Niedermeier Roland, Fischer Oliver et al. (2021-03)
     Influence of Fiber-Alignment on Pseudoductility and Micro-Cracking in a Cementitious Carbon-Fiber Composite Material
155. Baz Bilal, Rémond Sébastien, Aouad Georges (2021-01)
     Influence of the Mix Composition on the Thixotropy of 3D Printable Mortars
156. Guo Xiaolu, Yang Junyi, Xiong Guiyan (2020-09)
     Influence of Supplementary Cementitious Materials on Rheological Properties of 3D Printed Fly-Ash-Based Geopolymer
157. Mohan Manu, Rahul Attupurathu, Tittelboom Kim, Schutter Geert (2020-07)
     Evaluating the Influence of Aggregate Content on Pumpability of 3D Printable Concrete
158. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2020-07)
     Influence of Pumping-Extrusion on the Air-Void System of 3D Printed Concrete
159. Putten Jolien, Volder Melissa, Heede Philip, Schutter Geert et al. (2020-07)
     3D Printing of Concrete:
     The Influence on Chloride Penetration
160. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-07)
     Influence of Processing Parameters on the Layer Geometry in 3D Concrete Printing:
     Experiments and Modelling
161. Nair Sooraj, Panda Subhashree, Santhanam Manu, Sant Gaurav et al. (2020-05)
     A Critical Examination of the Influence of Material-Characteristics and Extruder-Geometry on 3D Printing of Cementitious Binders
162. Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
     Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing
163. Chougan Mehdi, Ghaffar Seyed, Jahanzat Mohammad, Albar Abdulrahman et al. (2020-04)
     The Influence of Nano-Additives in Strengthening Mechanical Performance of 3D Printed Multi-Binder Geopolymer Composites
164. Pham Luong, Tran Jonathan, Sanjayan Jay (2020-04)
     Steel-Fiber-Reinforced 3D Printed Concrete:
     Influence of Fiber Sizes on Mechanical Performance
165. Sun Xiaoyan, Wang Qun, Wang Hailong, Chen Long (2020-03)
     Influence of Multi-Walled Nanotubes on the Fresh and Hardened Properties of a 3D Printing PVA Mortar Ink
166. Pott Ursula, Jakob Cordula, Jansen Daniel, Neubauer Jürgen et al. (2020-02)
     Investigation of the Incompatibilities of Cement and Superplasticizers and Their Influence on the Rheological Behavior
167. Pham Luong, Lin Xiaoshan, Gravina R., Tran Jonathan (2019-12)
     Influence of PVA- and PP-Fibers at Different Volume Fractions on Mechanical Properties of 3D Printed Concrete
168. Dorn Tobias, Hirsch Tamino, Stephan Dietmar (2019-09)
     Study on the Influence of Accelerators on the Hydration of Portland Cement and Their Applicability in 3D Printing
169. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Hermens Lex et al. (2019-09)
     The Influence of Material Temperature on the In-Print Strength and Stability of a 3D Print Mortar
170. Peng Yiming, Ma Kunlin, Long Guangcheng, Xie Youjun (2019-08)
     Influence of Nano-SiO2, Nano-CaCO3 and Nano-Al2O3 on Rheological Properties of Cement-Fly-Ash-Paste
171. Wolfs Robert, Bos Freek, Salet Theo (2019-03)
     Hardened Properties of 3D Printed Concrete:
     The Influence of Process Parameters on Inter-Layer Adhesion
172. Cao Xiangpeng, Li Zongjin (2019-02)
     Factors Influencing the Mechanical Properties of Three-Dimensional Printed Products From Magnesium-Potassium-Phosphate Cement Material
173. Huang Tiancheng, Gu Hai, Zhang Jie, Li Bin et al. (2018-11)
     An Improved Multi-Relaxation Time Lattice Boltzmann Method for the Non-Newtonian Influence of the Yielding Fluid Flow in Cement-3D Printing
174. Hillegas James, Liu Rui, Liu Bosheng, Sanchez Alex et al. (2018-07)
     Engineering Properties Influencing Clayey Materials for Additive Manufacturing
175. Lin Jia, Wu Xiong, Yang Wen, Zhao Ri et al. (2018-02)
     The Influence of Fine Aggregates on the 3D Printing Performance