Skip to content

#fabrication

Keywords by Co - Occurrence

  1. Sawicki Bartłomiej, Düking Peter, Placzek Gerrit, Masur Lukas et al. (2026-01)
    Human-Robot Collaboration in Digital Fabrication with Concrete:
    Quantifying Productivity and Psychophysiological Strain of Human Workers
  2. Matos Ana, Fonseca Mariana, Milheiro-Oliveira Paula, Pimentel Mário (2026-01)
    Design of Eco-Efficient »Concrete« for Digital Fabrication
  3. Baghdadi Abtin, Khanipour Raad Kian, Dörrie Robin, Kloft Harald (2025-12)
    Fabrication of Dry Connection Through Stamping and Milling of Green-State Concrete
  4. Kloft Harald (2025-12)
    Digital Building Fabrication – The Path Towards the Unity of Material, Process and Form:
    A Personal Reflection from Research and Practice
  5. Tenesesku Vladyslav (2025-11)
    Technological Aspects of Fabricating a Reinforced Concrete Shell Using 3D Concrete Printing
  6. Ruiz Pedro, Perez Pablo, Alvarado Rodrigo, Valenzuela Sebastián et al. (2025-11)
    3D Printing of Surrealist Dreams:
    Constraints, Failures, and Craftsmanship in 1:1 Digital Fabrication
  7. Tang Can, Zhou Yujie, Mehmood Awais, Rania Chlihi et al. (2025-11)
    A Novel 3D-Printed Negative Poisson's Ratio Grid-Reinforced Cement-Based Composite Wall Structure:
    Design, Fabrication, and Compressive Properties
  8. Zhang Nan, Sanjayan Jay (2025-08)
    Concrete 3D Printing and Digital Fabrication Technologies for Bridge Construction
  9. Mercimek Ömer, Şahin Oğuzhan, Çelik Alper, Ozkan Ekinci Mehmet et al. (2025-08)
    Structural Performance of Pre-Fabricated 3D Printed Concrete Walls:
    Effect of Cold Joint, Axial Load and Load Type
  10. Kantaros Antreas, Ganetsos Theodore, Kanetaki Zoe, Stergiou Constantinos et al. (2025-08)
    Design and Fabrication of Customizable Urban Furniture Through 3D Printing Processes
  11. Xu Raymond, Morita Luka, Khosravian Parmida, Itani Anas (2025-07)
    Scaled-Down Simulation and Analysis of On-Site Robotic Fabrication and Construction
  12. Chovghi Frederic, Richter Christiane, D'Acunto Pierluigi (2025-07)
    Fabrication-Aware Structural Form-Finding for Additive Manufacturing:
    An Equilibrium-Based Approach
  13. Cui Weijiu, Ji Dongsheng, Shen Liang, Su Shiyong et al. (2025-06)
    A Neural Network-Based Model for Assessing 3D Printable Concrete Performance in Robotic Fabrication
  14. Lin Wenyu, Wang Li, Li Zhijian, Bai Gang et al. (2025-06)
    Multi-Scale Fabrication and Challenges in 3D Printing of Special -Shaped Concrete Structures
  15. Gantner Stefan, Rennen Philipp, Amiri Fatemeh, Rothe Tom et al. (2025-05)
    Robotic Frame Winding:
    Prefabricated Fiber Structures as Formwork and Reinforcement for Digitally Fabricated Shell-Like Concrete Elements
  16. Kloft Harald, Hack Norman, Sawicki Bartłomiej, Dörrie Robin et al. (2025-03)
    Digital Fabrication Strategies for Sustainability
  17. Calmanovici Miran, Livne Achiya, Barath Shany (2025-03)
    From Waste to Resource:
    A Design to Fabrication Approach Integrating Recycled Wood-Mycelium Mixtures for 3D Printing in Architecture
  18. Das Arnesh, Wenger Cedric, Walpen Lukas, Flatt Robert (2025-02)
    Early-Age Hydration of Accelerated Low-Carbon Cements for Digital Fabrication
  19. Engel Sven, Hegger Josef, Claßen Martin (2025-02)
    Multimodal Automated Fabrication with Concrete:
    Case-Study and Structural Performance of Ribbed CFRP-Reinforced Concrete Ceiling
  20. Nadi Mouad, Majdoubi Hicham, Haddaji Younesse, Bili Oumaima et al. (2025-01)
    Digital Fabrication Processes for Cementitious Materials Using Three-Dimensional 3D Printing Technologies
  21. Baş Sercan, Aydın Ozan, Bundur Zeynep, Guven Gursans (2025-01)
    Building Information Modeling (BIM)-Based On-Site 3D Printer Position-Optimization and Path-Planning for Digital Fabrication
  22. Cao Xiangpeng, Wu Shuoli, Cui Hongzhi (2024-12)
    Experimental Study on In-Situ Mesh Fabrication for Reinforcing 3D Printed Concrete
  23. Guan Jingyuan, Wang Li, Huang Yimiao, Ma Guowei (2024-12)
    3D Printed Concrete Composite Slabs Fabricated by Pre-Stressed Reinforced Permanent Formwork:
    Design, Manufacturing, and Performance
  24. Abdelmohsen Sherif, Massoud Passant (2024-11)
    Synthetic Fabrications:
    Lessons from Integrating Robotic Clay-Fabrication in Architectural Education
  25. Raza Saim, Sakha Mahsa, Manshadi Behzad, Fan Haifeng et al. (2024-11)
    Digital Fabrication of Ribbed Slabs with Post-Tensioned 3D Printed Concrete Formwork
  26. He Yuxiang, Robens-Radermacher Annika, Noda Sakiko, Wolf Christoph et al. (2024-11)
    Automated Workflows for Concrete Additive Manufacturing for Design, Optimization, and Fabrication of Parametrized Elements
  27. Soave Francesco, Muciaccia Giovanni, Ferrara Liberato (2024-11)
    An Indirect Methodology to Evaluate the Rheological Properties of a Digitally Fabricated Concrete Incorporating Corrosion Inhibitors
  28. Anton Ana-Maria, Skevaki Eleni, Bischof Patrick, Reiter Lex et al. (2024-11)
    Column-Slab Interfaces for 3D Concrete Printing:
    Design, Fabrication and Assembly Strategies
  29. Placzek Gerrit, Schwerdtner Patrick (2024-10)
    A Global Snapshot of 3D Printed Buildings:
    Uncovering Robotic-Oriented Fabrication-Strategies
  30. Slepicka Martin, Borrmann André (2024-09)
    Fabrication Information Modeling for Closed-Loop Design and Quality Improvement in Additive Manufacturing for Construction
  31. Kloft Harald, Sawicki Bartłomiej, Bos Freek, Dörrie Robin et al. (2024-09)
    Interaction of Reinforcement, Process, and Form in Digital Fabrication with Concrete
  32. Monfort Maxime, Kim Jongbeom, Schaeffer Julien, Pastorelli Florent et al. (2024-09)
    Sprayed Concrete Automation:
    A Unique and Complete Digital Fabrication Method
  33. Ammann Rebecca, Gebhard Lukas, Thoma Karel, Mata-Falcón Jaime et al. (2024-09)
    Environmental Benefits of Concrete Floor Slabs Produced with Digitally Fabricated Formworks:
    A Case Study
  34. Versteege Jelle, Wolfs Robert, Salet Theo (2024-09)
    A Data-Driven View on Digital Fabrication with Concrete:
    The Case of Inter-Layer Bond Strength
  35. Schmid Robert, Gierlinger David, Hansemann Georg, Trummer Andreas et al. (2024-09)
    Filigree Façade Panels Fabricated by 3D Concrete Printing
  36. Gosslar Joschua, Dorresteijn Evelien, David Martin, Leusmann Thorsten et al. (2024-09)
    Digital Fabrication with Local Earthen Materials:
    The Relevance of Process Robustness
  37. Cutajar Sacha, Quadranti Elia, Lloret-Fritschi Ena (2024-09)
    3D Printed Earth Formworks for Concrete:
    Exploring Fabrication Feasibility for Complex Filler Slabs
  38. Hechtl Christian, Kränkel Thomas, Gehlen Christoph (2024-09)
    Investigations into the Dynamics of Penetration Tests in Digital Fabrication
  39. Schneider Philip, Dietrich Sebastian, Richter Christiane, Asl Reza et al. (2024-09)
    Fabrication-Aware Design Method and Experimental Assessment of a Segmented Concrete Pedestrian Bridge Using SPI Technology.
  40. Carpo Mario (2024-09)
    The Sustainable Lightness of Digital Fabrication
  41. Hack Norman, Kloft Harald, Mai (née Dressler) Inka, D'Acunto Pierluigi et al. (2024-09)
    Injection 3D Concrete Printing:
    From Structural Geometry to Fabrication
  42. Lloret-Fritschi Ena, Jenny Ercan, Jenny David (2024-09)
    A New Future of Construction:
    Digital Fabrication and Sustainability
  43. Jenny Ercan, Gawel Abel (2024-09)
    Sustainable Construction Through On‐Site Robotic Fabrication:
    Past and Future Concepts
  44. Lowke Dirk, Anton Ana-Maria, Buswell Richard, Jenny Ercan et al. (2024-09)
    Digital Fabrication with Concrete Beyond Horizontal Planar Layers
  45. Bono Victor, Mesnil Romain, Ducoulombier Nicolas, Caron Jean-François (2024-08)
    Design, Structural Optimization and Fabrication of Concrete Shell Through Fiber-Reinforced 3D Printing
  46. Licen Jurij, Chen Taole (2024-08)
    Fabrication-Aware Design for 3DCP Shells Using Genetic Optimization
  47. Buschmann Birger, Henke Klaudius, Asshoff Carsten, Talke Daniel et al. (2024-08)
    Additive Manufacturing of Wood-Composite-Parts by Individual Layer Fabrication:
    Influence of Process Parameters on Product Properties
  48. Zhi Yefan, Teng Teng, Akbarzadeh Masoud (2024-08)
    Designing 3D Printed Concrete Structures with Scaled Fabrication Models
  49. Liu Nana, Gan Qili, Tao Qin, Wang Jie (2024-07)
    Research on Materials for Concrete (Mortar) 3D Printing Fabricated Components
  50. Antorveza Paez Karen, Ling Andrea, Mahamaliyev Nijat, Bauer Georg et al. (2024-07)
    Digital Fabrication of Biologically Cemented Spatial Structures
  51. Salaimanimagudam M., Jayaprakash Jaganathan (2024-07)
    Selection of Digital Fabrication Technique in the Construction Industry:
    A Multi-Criteria Decision-Making Approach
  52. Čítek David, Hurtig Karel, Kolísko Jiří, Koteš Peter (2024-06)
    Cementitious Material Development for Additive Fabrication
  53. Melter Oto, Čítek David, Hvizdal Ales, Gabriel Michael et al. (2024-06)
    Development of a Robotic Fabrication System for Cementitious Materials
  54. Čítek David, Hurtig Karel, Bureš Vladislav, Koteš Peter (2024-06)
    Cementitious Material Development for Additive Fabrication
  55. Wangler Timothy, Vangen Kathrina, Burger Joris, Flatt Robert (2024-05)
    Digital Fabrication Material-Processing-Strategy for Bespoke Low-Clinker Mass-Concrete Components
  56. Kim Il (2024-04)
    Density Gradient Concrete Fabrication with Injection 3D Gypsum Printing
  57. Matus Ilse, Alves Jorge, Góis Joaquim, Vaz-Pires Paulo et al. (2024-04)
    Artificial Reefs Through Additive Manufacturing:
    A Review of Their Design, Purposes and Fabrication Process for Marine Restoration and Management
  58. Hitzegrad Jan, Brohmann Leon, Herding Friedrich, Pfennings Kai et al. (2024-04)
    Surfaces of Coastal Biogenic Structures:
    Exploiting Advanced Digital Design and Fabrication-Strategies for the Manufacturing of Oyste-Reef- and Mussel-Bed-Surrogates
  59. Ribeiro João, Morais António, Silva João, Brandão Filipe et al. (2024-04)
    Robotic 3DCP Fabrication of Custom-Fit Slabs for Irregular Pontoons
  60. Yu Haoxuan, Wen Bodong, Zahidi Izni, Chow Ming et al. (2024-04)
    Constructing the Future:
    Policy-Driven Digital Fabrication in China's Urban Development
  61. Haar Bjorn, Kruger Jacques, Zijl Gideon (2024-04)
    Off-Site 3D Printed Concrete Beam Design and Fabrication
  62. Curth Alexander, Alvarez Eduardo, Feickert Kiley, Mueller Caitlin et al. (2024-04)
    Multi-Material Fabrication for Low-Carbon Construction:
    An Optimised Floor System for Affordable Housing in Mexico
  63. Corneliusen Julie, Horswill Duncan (2024-04)
    Reshaping Fabrication:
    A Case Study in Designing Carbon-Reduced Concrete Structures
  64. Neef Tobias, Müller Steffen, Mechtcherine Viktor (2024-03)
    Integrating Continuous Mineral-Impregnated Carbon-Fibers into Digital Fabrication with Concrete
  65. Curth Alexander, Pearl Natalie, Castro-Salazar Angelica, Mueller Caitlin et al. (2024-03)
    3D Printing Earth:
    Local, Circular Material Processing, Fabrication Methods, and Life Cycle Assessment
  66. Zhu Ronghua, Egbe King-James, Salehi Hadi, Shi Zhongtian et al. (2024-01)
    Eco-Friendly 3D Printed Concrete with Fine Aggregate Replacements:
    Fabrication, Characterization and Machine Learning Prediction
  67. Ruitinga Volker, Avramiea Emma (2023-12)
    Custom-Made Print-Heads Empowering 3D Printed Concrete:
    Innovations in Digital Design and Fabrication of Complex Prefabricated Elements
  68. Schwartz Thibault (2023-12)
    HAL Robotics:
    From Automated Architectural Design for Fabrication, to Architecting Automated Manufacturing Systems
  69. Maitenaz Sébastien, Mesnil Romain, Féraille Adélaïde, Caron Jean-François (2023-12)
    Materialising Structural Optimization of Reinforced Concrete Beams Through Digital Fabrication
  70. Rennen Philipp, Gantner Stefan, Dielemans Gido, Bleker Lazlo et al. (2023-12)
    Robotic Knitcrete:
    Computational Design and Fabrication of a Pedestrian Bridge Using Robotic Shotcrete on a 3D Knitted Formwork
  71. Bos Derk, Wolfs Robert (2023-12)
    A Quality-Control Framework for Digital Fabrication with Concrete
  72. Nair Sooraj, Tripathi Avinaya, Neithalath Narayanan (2023-11)
    Constitutive Response and Failure Progression in Digitally Fabricated 3D Printed Concrete Under Compression and Their Dependence on Print Layer-Height
  73. Naboni Roberto, Zomparelli Alessandro, Kunic Anja, Breseghello Luca (2023-11)
    Design, Robotic Fabrication and Augmented Construction of Low-Carbon Concrete Slabs Through Field-Based Reaction-Diffusion
  74. Eversmann Philipp, Rossi Andrea (2023-11)
    Towards Construction 4.0:
    Computational Circular Design and Additive Manufacturing for Architecture Through Robotic Fabrication with Sustainable Materials and Open-Source Tools
  75. Taher Ammar, Aşut Serdar, Spoel Willem (2023-10)
    An Integrated Workflow for Designing and Fabricating Multi-Functional Building Components Through Additive Manufacturing with Clay
  76. Wang Shih-Yuan, Liong Sze-Teng, Gan Y., Sheng Yu-Ting (2023-10)
    Cost-Effective Concrete Fabrication for Large Irregularly Shaped Architectural Structures
  77. Mata-Falcón Jaime, Gebhard Lukas, Lee Minu, Bischof Patrick (2023-10)
    Advances in Structural Applications of Digital Fabrication With Concrete
  78. Slepicka Martin, Mawas Karam, Borrmann André, Maboudi Mehdi et al. (2023-09)
    Digital Twinning in Additive Manufacturing:
    Closing the Digital-Physical-Digital Loop by Automated Integration of Captured Geometric Data into Fabrication Information Models
  79. Liu Xiaoshuang, Zou Yuxiao, Wu Yingxuan, Cui Dong et al. (2023-09)
    The Effect of U-Type Expanding Agent for Concrete (UEA) on the Microstructural and Mechanical Properties of Mortar Fabricated Through Alternate 3D Printing
  80. Ribeiro João, Silva João, Morais António, Figueiredo Bruno et al. (2023-07)
    3DCP for Complex Sites:
    Robotic Fabrication of Custom-Fit Slabs in Irregular Pontoons
  81. Placzek Gerrit, Schwerdtner Patrick (2023-07)
    Concrete Additive Manufacturing in Construction:
    Integration Based on Component-Related Fabrication-Strategies
  82. Slepicka Martin, Helou Jalal, Borrmann André (2023-07)
    Real-Time Data Exchange Robot-Control Integration for Fabrication Information Modeling
  83. Çapunaman Özgüç, Iseman Emily, Gürsoy Benay (2023-07)
    Material in the Loop Fabrication:
    A Vision-Based Adaptive Clay 3D Printing Workflow on Indeterminate Sand Surfaces
  84. Kalthoff Matthias, Bosbach Sven, Backes Jana, Cruz Cynthia et al. (2023-06)
    Fabrication of Lightweight, Carbon Textile Reinforced Concrete Components with Internally Nested Lattice Structure Using 2-Layer Extrusion by LabMorTex
  85. Zhang Dan, Ma Guowei, Guan Jingyuan, Wang Li et al. (2023-06)
    Cyclic Behavior of Unbonded Post-Tensioned Pre-Cast Segmental Concrete Columns Fabricated by 3D Printed Concrete Permanent Formwork
  86. Mozaffari Salma, Bruce Mackenzie, Clune Gabrielle, Xie Ruxin et al. (2023-06)
    Digital Design and Fabrication of Clay Formwork for Concrete Casting
  87. Graser Konrad, Walzer Alexander, Hunhevicz Jens, Jähne René et al. (2023-06)
    Qualitative Technology Evaluation of Digital Fabrication with Concrete:
    Conceptual Framework and Scoreboard
  88. Leschok Matthias, Cheibas Ina, Piccioni Valeria, Seshadri Bharath et al. (2023-05)
    3D Printing Facades:
    Design, Fabrication, and Assessment Methods
  89. Blagojevic Boris, Sawodny Oliver (2023-04)
    Path-Planning for Graded Concrete Element Fabrication
  90. Luo Jiaxiang, Gao Tianyi, Yuan Philip (2023-04)
    Fabrication of Reinforced 3D Concrete Printing Formwork
  91. Ibrahim Kamoru, Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-03)
    Influence of Effective Micro-Organisms on the Rheology and Fresh State Properties of SCMs-Based Concrete for Digital Fabrication
  92. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2023-03)
    Twin-Pipe Pumping-Strategy for Stiffening-Control of 3D Printable Concrete:
    From Transportation to Fabrication
  93. Burger Joris, Aejmelaeus-Lindström Johan, Gürel Şeyma, Niketić Filip et al. (2023-02)
    Eggshell Pavilion:
    A Reinforced Concrete Structure Fabricated Using Robotically 3D Printed Formwork
  94. Tuvayanond Wiput, Prasittisopin Lapyote (2023-02)
    Design for Manufacture and Assembly of Digital Fabrication and Additive Manufacturing in Construction:
    A Review
  95. Naboni Roberto, Breseghello Luca (2022-12)
    Additive Formwork:
    Examining Design, Fabrication Space and Resolution for Bespoke Concrete Elements
  96. Bischof Patrick, Mata-Falcón Jaime, Ammann Rebecca, Näsbom Andreas et al. (2022-12)
    Digitally Fabricated Weak Interfaces to Reduce Minimum Reinforcement in Concrete Structures
  97. Yoris-Nobile Adrian, Slebi-Acevedo Carlos, Lizasoain-Arteaga Esther, Indacoechea-Vega Irune et al. (2022-11)
    Artificial Reefs Built by 3D Printing:
    Systematisation in the Design, Material-Selection and Fabrication
  98. Salaimanimagudam M., Jayaprakash Jaganathan (2022-11)
    Optimum Selection of Reinforcement, Assembly, and Formwork System for Digital Fabrication Technique in Construction Industry:
    A Critical Review
  99. Burger Joris, Huber Tobias, Lloret-Fritschi Ena, Mata-Falcón Jaime et al. (2022-10)
    Design and Fabrication of Optimised Ribbed Concrete Floor Slabs Using Large-Scale 3D Printed Formwork
  100. Mehdizadeh Samim, Zimmermann Adrian, Tessmann Oliver (2022-09)
    RotoColumn:
    A Continuous Digital Fabrication Framework for Casting Large-Scale Linear Concrete Hollow Elements
  101. Nuh Mishael, Oval Robin, Orr John, Shepherd Paul (2022-09)
    Digital Fabrication of Ribbed Concrete Shells Using Automated Robotic Concrete Spraying
  102. Mata-Falcón Jaime, Bischof Patrick, Huber Tobias, Anton Ana-Maria et al. (2022-09)
    Digitally Fabricated Ribbed Concrete Floor Slabs:
    A Sustainable Solution for Construction
  103. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2022-09)
    Robot-Assisted Flow-Production-Processes Tool-Development for the Fabrication of Thin-Walled Fiber-Reinforced Concrete Elements
  104. Jenny Ercan, Mitterberger Daniela, Lloret-Fritschi Ena, Vasey Lauren et al. (2022-09)
    Robotic On-Site Adaptive Thin-Layer Printing:
    Challenges and Workflow for Design and Fabrication of Bespoke Cementitious Plasterwork at Full-Architectural-Scale
  105. Bischof Patrick, Mata-Falcón Jaime, Kaufmann Walter (2022-08)
    Fostering Innovative and Sustainable Mass-Market Construction Using Digital Fabrication with Concrete
  106. Peng Guanhong (2022-08)
    Digital Fabrication and Mechanical Properties of 3D Printing Concrete
  107. Slepicka Martin, Vilgertshofer Simon, Borrmann André (2022-07)
    Fabrication Information Modeling:
    Interfacing Building Information Modeling with Digital Fabrication
  108. Anton Ana-Maria, Reiter Lex, Skevaki Eleni, Dillenburger Benjamin (2022-07)
    Reinforcement Lattices for 3DCP:
    A Fabrication Method Based on Ruled Surfaces
  109. Lin Alexander, Goel Abhimanyu, Wong De, Yeo Charlene et al. (2022-07)
    Compressive Load-Dominated Concrete Structures for Customized 3D Printing Fabrication
  110. Kim Tae, Nguyen Duy, Shim Chang (2022-06)
    Digital Fabrication for DfMA of a Prefabricated Bridge Pier
  111. Menna Costantino, Esposito Laura (2022-06)
    Flexural Behavior of Steel-Reinforced Topology-Optimised Beams Fabricated by 3D Concrete Printing
  112. Schmid Robert, Hansemann Georg, Autischer Michael, Juhart Joachim (2022-06)
    Adaptive Foam-Concrete in Digital Fabrication
  113. Nuh Mishael, Oval Robin, Orr John (2022-06)
    ARCS:
    Automated Robotic Concrete Spraying for the Fabrication of Variable Thickness Doubly Curved Shells
  114. Bischof Patrick, Mata-Falcón Jaime, Burger Joris, Kaufmann Walter (2022-06)
    Digitally Fabricated Keyed Concrete Connections
  115. Sitnikov Vasily, Kitani Lena, Maneka Artemis, Lloret-Fritschi Ena et al. (2022-06)
    Design and Fabrication of Spatially Graded Concrete Elements with Ice Aggregate Method
  116. Pastore Tommaso, Esposito Laura, Menna Costantino, Asprone Domenico (2022-06)
    Overcoming Fabrication-Constraints in Concrete 3D Printing Using Interlacing Bezier-Curves:
    A Numerical and Experimental Analysis
  117. Mawas Karam, Maboudi Mehdi, Gerke Markus (2022-05)
    Automatic Geometric Inspection in Digital Fabrication
  118. Flatt Robert, Wangler Timothy (2022-05)
    On Sustainability and Digital Fabrication with Concrete
  119. Stieler David, Schwinn Tobias, Menges Achim (2022-04)
    Additive Formwork in Pre-Cast Construction:
    Agent-Based Methods for Fabrication-Aware Modularization of Concrete Building Elements
  120. Wu Hao, Li Ziyan, Zhou Xinjie, Wu Xinyu et al. (2022-04)
    Digital Design and Fabrication of a 3D Concrete Printed Funicular Spatial Structure
  121. Huang Shuyi, Xu Weiguo, Li Yuqian (2022-04)
    The Impacts of Fabrication Systems on 3D Concrete Printing Building Forms
  122. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2022-04)
    Slow Penetration for Characterizing Concrete for Digital Fabrication
  123. Ou Ya, Bao Ding, Zhu Guan-Qi, Luo Dan (2022-04)
    Additive Fabrication of Large-Scale Customizable Formwork Using Robotic Fiber-Reinforced Polymer Winding
  124. Roussel Nicolas, Lowke Dirk, Buswell Richard (2022-01)
    Digital Fabrication with Cement-Based Materials:
    The RILEM D.F.C. Technical Committee
  125. Buswell Richard, Bos Freek, Silva Wilson, Hack Norman et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Process Classification and Case Studies
  126. Mechtcherine Viktor, Fataei Shirin, Bos Freek, Buswell Richard et al. (2022-01)
    Digital Fabrication with Cement-Based Materials:
    Underlying Physics
  127. Momeni Mahdi, Relefors Johan, Khatry Abubakar, Pettersson Lars et al. (2021-11)
    Automated Fabrication of Reinforcement Cages Using a Robotized Production Cell
  128. Slepicka Martin, Vilgertshofer Simon, Borrmann André (2021-11)
    Fabrication Information Modeling:
    Closing the Gap between Building Information Modeling and Digital Fabrication
  129. Graser Konrad, Kahlert Aniko, Hall Daniel (2021-10)
    DFAB HOUSE:
    Implications of a Building-Scale Demonstrator for Adoption of Digital Fabrication in AEC
  130. Blagojevic Boris, Schonemann Benjamin, Nigl David, Blandini Lucio et al. (2021-10)
    Trajectory-Planning for Concrete Element Fabrication with Optimal Control
  131. Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Khayat Kamal et al. (2021-10)
    Digital Fabrication of Eco-Friendly Ultra-High-Performance Fiber-Reinforced Concrete
  132. Uribe-Pinzon Sebastian, Mosquera Mariana, Cardenas-Pulido Jhon, Higuera Camilo (2021-10)
    Advances and Current Trends on the Use of 3D Printed Concrete for Building Fabrication
  133. Gebhard Lukas, Mata-Falcón Jaime, Markić Tomislav, Kaufmann Walter (2021-09)
    Aligned Inter-Layer Fiber-Reinforcement for Digital Fabrication with Concrete
  134. Troemner Matthew, Ramyar Elham, Meehan Jonathan, Johnson Benton et al. (2021-09)
    A 3D Printing-Centered Approach to Mars-Habitat Architecture and Fabrication
  135. Albalawi Hamed, Khan Zainab, Valle-Pérez Alexander, Kahin Kowther et al. (2021-09)
    Sustainable and Eco-Friendly Coral Restoration Through 3D Printing and Fabrication
  136. Farahbakhsh Mehdi, Borhani Alireza, Kalantar Negar, Rybkowski Zofia (2021-07)
    PRINT in PRINT:
    A Nested Robotic Fabrication-Strategy for 3D Printing Dissolvable Formwork of a Stackable Column
  137. Zhu Binrong, Pan Jinlong, Zhou Zhenxin, Cai Jingming (2021-04)
    Mechanical Properties of Engineered Cementitious Composites Beams Fabricated by Extrusion-Based 3D
  138. Zhan Qiang, Zhou Xinjie, Yuan Philip, Zhou Xinjie (2021-04)
    Design and Fabrication of a 3D Concrete Printed Pre-Stressed Bridge
  139. Cho Seung, Kruger Jacques, Rooyen Algurnon, Zijl Gideon (2021-03)
    Rheology and Application of Buoyant Foam-Concrete for Digital Fabrication
  140. Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
    Integrating Reinforcement in Digital Fabrication with Concrete:
    A Review and Classification Framework
  141. Mohammed Alyaa, Saadi Nihad (2020-12)
    Ultra-High Early Strength Cementitious Grout Suitable for Additive Manufacturing Applications Fabricated by Using Graphene Oxide and Viscosity Modifying Agents
  142. Bester Frederick, Heever Marchant, Kruger Jacques, Zijl Gideon (2020-11)
    Reinforcing Digitally Fabricated Concrete:
    A Systems Approach Review
  143. Jones Scott (2020-11)
    Fused Filament-Fabrication Printer Modified to Dispense Cement-Paste for Concrete Additive Manufacturing Studies
  144. Jenny Ercan, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias (2020-11)
    Crafting Plaster through Continuous Mobile Robotic Fabrication On-Site
  145. Kruger Jacques, Zijl Gideon (2020-10)
    A Compendious Review on Lack-of-Fusion in Digital Concrete Fabrication
  146. Xu Weiguo, Gao Yuan, Sun Chenwei, Wang Zhi (2020-09)
    Fabrication and Application of 3D Printed Concrete Structural Components in the Boshan Pedestrian Bridge Project
  147. Graser Konrad, Baur Marco, Apolinarska Aleksandra, Dörfler Kathrin et al. (2020-09)
    DFAB House:
    A Comprehensive Demonstrator of Digital Fabrication in Architecture
  148. Hansemann Georg, Schmid Robert, Holzinger Christoph, Tapley Joshua et al. (2020-09)
    Additive Fabrication of Concrete Elements by Robots:
    Lightweight Concrete Ceiling
  149. He Rui, Li Mingkai, Gan Vincent, Ma Jun (2020-08)
    BIM-Enabled Computerized Design and Digital Fabrication of Industrialized Buildings:
    A Case Study
  150. Lu Ming, Yuan Philip (2020-08)
    A New Algorithm to Get Optimized Target Plane on Six-Axis Robot for Fabrication
  151. Wang Shian, Liu Chi, Zhang Guo, Luo Qi et al. (2020-08)
    Digital Planting:
    Fabrication of Integrated Concrete Green Wall via Additive Manufacturing
  152. Hack Norman, Kloft Harald (2020-07)
    Shotcrete 3D Printing Technology for the Fabrication of Slender Fully Reinforced Freeform Concrete Elements with High Surface Quality:
    A Real-Scale Demonstrator
  153. Gardner Guy, Forward Kristen, Tse Kim, Sharma Karan (2020-07)
    Rapid Composite Formwork:
    An Automated and Customizable Process for Freeform Concrete Through Computational Design and Robotic Fabrication
  154. Battaglia Christopher, Miller Martin, Verian Kho (2020-07)
    Print-Cast Concrete:
    Additive Manufacturing for 3D Printing Mortar in Robotically Fabricated Green Sand Molds
  155. Burger Joris, Lloret-Fritschi Ena, Taha Nizar, Scotto Fabio et al. (2020-07)
    Design and Fabrication of a Non-Standard, Structural Concrete Column Using Eggshell:
    Ultra-Thin, 3D Printed Formwork
  156. Pastore Tommaso, Menna Costantino, Asprone Domenico (2020-07)
    Combining Multiple Loads in a Topology-Optimization Framework for Digitally Fabricated Concrete Structures
  157. Kurt Sibel, Atalay Yiğit, Aydın Ozan, Avcıoğlu Berrak et al. (2020-07)
    Design of Energy-Efficient White Portland Cement Mortars for Digital Fabrication
  158. Nematollahi Behzad, Bong Shin, Xia Ming, Sanjayan Jay (2020-07)
    Digital Fabrication of ‘Just-Add-Water’ Geopolymers:
    Effects of Curing Condition and Print-Time Interval
  159. Varela Hugo, Barluenga Gonzalo, Palomar Irene (2020-07)
    Rheology Evaluation of Cement-Paste with Nano-Clay , Nano-Silica and Polymeric Admixtures for Digital Fabrication
  160. Vukorep Ilija, Zimmermann Gregor, Sablotny Tino (2020-07)
    Robot-Controlled Fabrication of Sprayed Concrete Elements as a Cyber-Physical-System
  161. Pfeiffer Sven, Dorn Tobias, Hirsch Tamino, Ehm Clemens et al. (2020-07)
    Architectural Applications and Workflows for Additive Fabrication with Concrete
  162. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
    Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
  163. Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
    A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete
  164. Kruger Jacques, Zeranka Stephan, Zijl Gideon (2020-04)
    A Rheology-Based Quasi-Static Shape-Retention-Model for Digitally Fabricated Concrete
  165. Menna Costantino, Mata-Falcón Jaime, Bos Freek, Vantyghem Gieljan et al. (2020-04)
    Opportunities and Challenges for Structural Engineering of Digitally Fabricated Concrete
  166. Hack Norman, Dörfler Kathrin, Walzer Alexander, Wangler Timothy et al. (2020-03)
    Structural Stay-in-Place Formwork for Robotic In-Situ Fabrication of Non-Standard Concrete Structures:
    A Real-Scale Architectural Demonstrator
  167. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
    Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
  168. Szabó Anna, Lloret-Fritschi Ena, Reiter Lex, Gramazio Fabio et al. (2019-09)
    Revisiting Folded Forms with Digital Fabrication
  169. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Gramazio Fabio et al. (2019-09)
    Processing of Set-on-Demand Solutions for Digital Fabrication in Architecture
  170. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2019-09)
    Post-Processing Techniques to Enhance Strength of Portland Cement Mortar Digitally Fabricated Using Powder-Based 3D Printing Process
  171. Das Arnesh, Reiter Lex, Wangler Timothy, Flatt Robert (2019-09)
    Hydration-Control of Ternary Cements for Digital Fabrication with Concrete
  172. Dörfler Kathrin, Hack Norman, Sandy Timothy, Giftthaler Markus et al. (2019-09)
    Mobile Robotic Fabrication Beyond Factory Conditions:
    Case Study Mesh Mould Wall of the DFAB HOUSE
  173. Markin Slava, Nerella Venkatesh, Schröfl Christof, Guseynova Gyunay et al. (2019-07)
    Material-Design and Performance-Evaluation of Foam-Concrete for Digital Fabrication
  174. Grassi Giulia, Lupica Spagnolo Sonia, Paoletti Ingrid (2019-05)
    Fabrication and Durability Testing of a 3D Printed Façade for Desert Climates
  175. Ham Namhyuk, Lee Sanghyo (2019-01)
    Project Benefits of Digital Fabrication in Irregular-Shaped Buildings
  176. Prasittisopin Lapyote, Taweekarn Naphat, Chuaysiri Chanita, Snguanyat Chalermwut (2018-11)
    Printing and Fabrication Processes of Curvature Single-Layered Wall House Printed by 3D Extrusion-Printer
  177. Agustí-Juan Isolda, Jipa Mihail-Andrei, Habert Guillaume (2018-11)
    Environmental Assessment of Multi-Functional Building Elements Constructed with Digital Fabrication Techniques
  178. Meibodi Mania, Jipa Mihail-Andrei, Giesecke Rena, Shammas Demetris et al. (2018-10)
    Smart Slab:
    Computational Design and Digital Fabrication of a Lightweight Concrete Slab
  179. Chee Ryan, Tan Wei, Goh Wei, Amtsberg Felix et al. (2018-09)
    Concrete Fabrication by Digitally Controlled Injection
  180. Martins Pedro, Campos Paulo, Nunes Sandra, Sousa José (2018-09)
    The Tectonics of Digitally Fabricated Concrete:
    A Case for Robotic Hot Wire-Cutting
  181. Stefanoni Matteo, Angst Ueli, Elsener Bernhard (2018-09)
    Corrosion Challenges and Opportunities in Digital Fabrication of Reinforced Concrete
  182. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2018-09)
    Large-Scale Testing of Digitally Fabricated Concrete (DFC) Elements
  183. Wangler Timothy, Flatt Robert (2018-09)
    Proceedings of the 1st RILEM International Conference on Concrete and Digital Fabrication:
    Correction
  184. Mata-Falcón Jaime, Bischof Patrick, Kaufmann Walter (2018-09)
    Exploiting the Potential of Digital Fabrication for Sustainable and Economic Concrete Structures
  185. Borg Costanzi Christopher, Ahmed Zeeshan, Schipper Roel, Bos Freek et al. (2018-07)
    3D Printing Concrete on Temporary Surfaces:
    The Design and Fabrication of a Concrete Shell Structure
  186. Schwartz Joseph (2018-07)
    Graphic Statics and Their Potential for Digital Design and Fabrication with Concrete
  187. Herrmann Eric, Mainka Jeldrik, Lindemann Hendrik, Wirth Franz et al. (2018-07)
    Digitally Fabricated Innovative Concrete Structures
  188. Buchli Jonas, Giftthaler Markus, Kumar Nitish, Lussi Manuel et al. (2018-07)
    Digital In-Situ Fabrication:
    Challenges and Opportunities for Robotic In-Situ Fabrication in Architecture, Construction, and Beyond
  189. Reiter Lex, Wangler Timothy, Roussel Nicolas, Flatt Robert (2018-06)
    The Role of Early-Age Structural Build-Up in Digital Fabrication with Concrete
  190. Asprone Domenico, Menna Costantino, Bos Freek, Salet Theo et al. (2018-06)
    Rethinking Reinforcement for Digital Fabrication with Concrete
  191. Marchon Delphine, Kawashima Shiho, Bessaies-Bey Hela, Mantellato Sara et al. (2018-05)
    Hydration- and Rheology-Control of Concrete for Digital Fabrication:
    Potential Admixtures and Cement-Chemistry
  192. Scotto Fabio, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias et al. (2018-05)
    Adaptive Control-System for Smart Dynamic Casting:
    Defining Fabrication-Informed Design-Tools and Process-Parameters in Digital Fabrication-Processes
  193. Soto Borja, Agustí-Juan Isolda, Hunhevicz Jens, Joss Samuel et al. (2018-05)
    Productivity of Digital Fabrication in Construction:
    Cost and Time-Analysis of a Robotically Built Wall
  194. Rippmann Matthias, Liew A., Mele Tom, Block Philippe (2018-03)
    Design, Fabrication and Testing of Discrete 3D Sand-Printed Floor Prototypes
  195. Duballet Romain, Baverel Olivier, Dirrenberger Justin (2017-09)
    Design of Space-Truss-Based Insulating Walls for Robotic Fabrication in Concrete
  196. Craveiro Flávio, Bártolo Helena, Gale Andrew, Duarte José et al. (2017-07)
    A Design Tool for Resource-Efficient Fabrication of 3D Graded Structural Building Components Using Additive Manufacturing
  197. Keating Steven, Leland Julian, Cai Levi, Oxman Neri (2017-04)
    Toward Site-Specific and Self-Sufficient Robotic Fabrication on Architectural-Scales
  198. Loveridge Russell, Coray Tanja (2017-04)
    Robots on Construction Sites:
    The Potential and Challenges of On-Site Digital Fabrication
  199. Agustí-Juan Isolda, Müller Florian, Hack Norman, Wangler Timothy et al. (2017-04)
    Potential Benefits of Digital Fabrication for Complex Structures:
    Environmental Assessment of a Robotically Fabricated Concrete Wall
  200. Liew A., López D., Mele Tom, Block Philippe (2017-02)
    Design, Fabrication and Testing of a Prototype, Thin-Vaulted, Unreinforced Concrete Floor
  201. Agustí-Juan Isolda, Habert Guillaume (2016-11)
    Environmental Design Guidelines for Digital Fabrication
  202. Lim Sungwoo, Buswell Richard, Valentine Philip, Piker Daniel et al. (2016-06)
    Modelling Curved-Layered Printing Paths for Fabricating Large-Scale Construction Components
  203. Agustí-Juan Isolda, Habert Guillaume (2016-04)
    An Environmental Perspective on Digital Fabrication in Architecture and Construction
  204. Duro-Royo Jorge, Mogas-Soldevila Laia, Oxman Neri (2015-06)
    Flow-Based Fabrication:
    An Integrated Computational Workflow for Design and Digital Additive Manufacturing of Multifunctional Heterogeneously Structured Objects
  205. Martins Pedro, Sousa José (2014-09)
    Digital Fabrication Technology in Concrete Architecture
  206. Keating Steven, Spielberg Nathan, Klein John, Oxman Neri (2014-05)
    A Compound Arm Approach to Digital Construction:
    A Mobile Large-Scale Platform for On-Site Sensing, Design, and Digital Fabrication
  207. Hack Norman, Lauer Willi (2014-04)
    Mesh Mould:
    Robotically Fabricated Spatial Meshes as Reinforced Concrete Formwork
  208. Lloret-Fritschi Ena, Shahab Amir, Linus Mettler, Flatt Robert et al. (2014-03)
    Complex Concrete Structures:
    Merging Existing Casting Techniques with Digital Fabrication
  209. Helm Volker, Willmann Jan, Gramazio Fabio, Kohler Matthias (2013-11)
    In-Situ Robotic Fabrication:
    Advanced Digital Manufacturing Beyond the Laboratory
  210. Hack Norman, Lauer Willi, Langenberg Silke, Gramazio Fabio et al. (2013-09)
    Overcoming Repetition:
    Robotic Fabrication Processes at a Large-Scale
  211. Keating Steven, Oxman Neri (2013-06)
    Compound Fabrication:
    A Multi-Functional Robotic Platform for Digital Design and Fabrication
  212. Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias, Langenberg Silke (2013-05)
    Complex Concrete Constructions:
    Merging Existing Casting Techniques with Digital Fabrication
  213. Helm Volker, Jenny Ercan, Gramazio Fabio, Kohler Matthias (2012-10)
    Mobile Robotic Fabrication on Construction Sites:
    DimRob
  214. Yeh Zhenghao, Khoshnevis Behrokh (2009-09)
    Geometric Conformity-Analysis for Automated Fabrication Processes Generating Ruled Surfaces:
    Demonstration for Contour Crafting
  215. Khoshnevis Behrokh, Hwang Dooil, Yao Ke, Yeh Zhenghao (2006-05)
    Mega-Scale Fabrication by Contour Crafting
  216. Hwang Dooil, Khoshnevis Behrokh (2004-09)
    Concrete Wall Fabrication by Contour Crafting