Skip to content

#assessment

Keywords by Co - Occurrence

  1. Tripathi Avinaya, Nair Sooraj, Rajan Subramaniam, Sant Gaurav et al. (2026-04)
    Deformation-Based Buildability Assessment of 3D Printed Concrete and Its Numerical Simulation
  2. Jamhiri Babak, Buswell Richard, Blanco Ana (2026-04)
    How Homogenous Is Your 3D Printed Concrete?:
    A New Approach to Assessing Anisotropy Using Weibull Statistics
  3. Nayak Anitha, Nayaka Ramesh, Zhang Y. (2026-04)
    Performance Evaluation, Microstructure Behaviour and Life Cycle Assessment of 3D Concrete Printable Ink Containing Recycled Construction Waste
  4. Lu Pengyuan, Yang Yekai, Zhao Qingxin, Liu Zhongxian et al. (2026-03)
    Low-Carbon 3D-Printed Geopolymer Ultra-High-Strength Concrete Enabled by Soda Residue:
    Sustainable Development and Environmental Impact Assessment
  5. Baalal Salah, Oulkhir Fatima, Akhrif Iatimad, El Jai Mostapha (2026-03)
    Success of Hybrid Materials 3D Printing, Technological Insights and Risk Assessment:
    A Critical Review
  6. Mastropasqua Antonio, Lagrasta Francesco, Nicolò Michele, Pontrandolfo Pierpaolo (2026-03)
    Investigating the Environmental Impact of Additive Construction:
    A Systematic Analysis of the Life Cycle Assessment Studies
  7. Punurai Wonsiri, Liu Yiliu (2026-03)
    Integrating Machine Learning with 3D Printing Concrete for Marine Structures:
    Mix Design, Strength Assessment, and Carbon Footprint Prediction
  8. Dewi Melati, Wang Wei-Chien, Lin Wei-Ting (2026-03)
    Development of Low-Thermal-Conductivity Fly Ash Geopolymer Foam Mortars with Stabilizer Effects and 3D Printability Assessment
  9. Reißig Silvia, Mechtcherine Viktor (2026-03)
    Assessing and Modeling the Buildability of Cement-Based Materials in the Context of Digital Fabrication
  10. Rehman Saif, Robens-Radermacher Annika, Unger Jörg, Wolfs Robert (2026-03)
    Assessing Structural Failure in Extrusion-Based 3D Concrete Printing Using a Plasticity Model with Non-Linear Hardening
  11. Silvennoinen Heidi, Honic Meliha, Slavkovic Katarina, Block Philippe et al. (2026-03)
    Additive Manufacturing for Circular Construction:
    A Review of Design Strategies and Their Assessment
  12. Oh Gyujong, Oh Sangwoo, Choi Seongcheol (2026-02)
    Carbonated Basic Oxygen Furnace Slag Fine Aggregate in Concrete:
    Laboratory Assessment and Sustainable Application in 3D-Printed Concrete Components
  13. Kocaer Öznur (2026-02)
    Environmental Assessment of Waste-Derived Materials in 3D Concrete Printing and Cast-in-Place Construction Through a BIM-Integrated Multi-Scale Life Cycle Assessment Framework
  14. Lima Andrade Everton, Silva Nunes Ueslei, Souza Paulo, Vieira Nóbrega Ana et al. (2026-02)
    Assessment of Accelerators for 3D-Printed LC3-Based Cementitious Materials
  15. Chang Mengzhu, Zeng Jun (2026-01)
    Performance-Oriented Assessment of 3D-Printed Architecture for Small-Scale Housing
  16. Nguyen Nhat, Javan Kazem, Jordan Adam, Akbarnezhad Ali et al. (2026-01)
    Techno-Economic Analysis of 3D Printed Modular Housing:
    Productivity, Cost, and Environmental Assessment
  17. Aroso Francisca, Reis Rui, Brandão Filipe, Figueiredo Bruno et al. (2026-01)
    Assessing Orthotropic Mechanical Performance and Digital Twin of Robotic 3D Printed Cementitious Mortars with Fibers and Metal Reinforcements
  18. Cárdenas Valeria, Parmigiani Silvia, Vargas Juan, Restuccia Luciana et al. (2026-01)
    Incorporation of Vitrified Ashes in Lightweight Foamed Concrete for 3D Printing:
    Thermal and Mechanical Assessment
  19. Hurtig Karel, Čítek David, Holý Milan, Koteš Peter et al. (2025-12)
    Experimental Assessment of Durability in 3D Printed Cementitious Materials
  20. Shilar Fatheali, Shilar Mubarakali (2025-12)
    Performance-Based Analysis of 3D Printed Geopolymers Relating Durability, Microstructure, and Life Cycle Assessment
  21. Han Seongho, Ahn Eunjong, Shin Myoungsu, Popovics John et al. (2025-12)
    Methodology for Surface Defect Assessment in 3D Concrete Printing Using Computer-Vision and Ultrasonic Testing Considering Structural Build-Up
  22. Liu Huawei, Tao Yaxin, Zhu Chao, Liu Chao et al. (2025-11)
    3D Printed Concrete with Recycled Coarse Aggregate:
    Freeze-Thaw Resistance Assessment and Damage Mechanisms
  23. Si Wen, Khan Mehran, McNally Ciaran (2025-11)
    Rheological Optimization and Mechanical Performance Assessment of High-Volume GGBS-Silica Fume Mortars for 3D Printing
  24. Wang Zherui, Teitelbaum E., Akbarzadeh Masoud, Aviv D. (2025-11)
    Experimental Assessment on Thermal Mass Performance of Structurally Optimized, 3D-Printed Concrete Floor Element for Carbon Emission Reduction
  25. Fasihi Ali, Libre Nicolas (2025-11)
    Tip Penetration Test for Rapid in-Line Assessment of Static Yield Stress During 3D Concrete Printing Process
  26. Soshinskiy Olexander, Rashkevich Nina, Shakhov Stanislav, Melnychenko Andrii (2025-11)
    Formulating a Calculation Methodology for Assessing the Strength Characteristics of Building Structures Constructed with a Construction 3D Printer
  27. Gümrük Idil, Schröder Torsten, Wolfs Robert, Salet Theo (2025-11)
    3DCP-CI:
    Developing a Circularity Indicator for Assessing 3DConcrete Printed Architectural Designs
  28. Ebiloma David, Olatunbosun Olajumoke, Isang Inimbom, Aigbavboa Clinton (2025-11)
    Assessing the Effects of 3D-Printed Concrete for Sustainable Construction:
    The Stakeholders' Perspective
  29. Megahed Mai, Abou Zeid Mohamed (2025-11)
    Toward Sustainable 3D Concrete Printing:
    Assessment of SCM-Superplasticizer Interactions on Rheology and Buildability
  30. Nair Sajitha, Nagarajan Praveen, Thampi Santosh, Das Sudha et al. (2025-10)
    Life Cycle-Based Sustainability Assessment of Optimized 3D Printable Concrete Mixes Incorporating Scms and Recycled Aggregates
  31. Li Yeou-Fong, Lin Chih-Chieh, Syu Jin-Yuan, Huang Chih-Hong et al. (2025-10)
    Enhancing 3D-Printed Cement Mortar with Recycled PCB Glass Fibers:
    Printability, Mechanical Strength, and FEM-Based Structural Assessment
  32. Haripan Vislavath, Senthilnathan Shanmugaraj, Santhanam Manu, Raphael Benny (2025-10)
    Printability Assessment of Concrete 3D Printed Elements with Recycled Fine Aggregate
  33. Zhang Yi, Lima Lucas, Böhler David, Arunothayan Arun et al. (2025-10)
    Durability Assessment of 3D Printed Cement-Based Materials:
    A RILEM TC 304-ADC Interlaboratory Study
  34. Ataei Sarah, Jafari Amirhosein (2025-10)
    Comparative Environmental Impact Assessment of 3D Concrete Printing and Precast Techniques in Bridge Construction:
    A Case Study Analysis
  35. Drumond Pedro, Milagres Geysiane, Parassen Paloma, Santos Luana et al. (2025-10)
    Assessment of Printing Direction in Flexural Tests of 3D Printed Reinforced Concrete Beams
  36. Giulivo Marco, Capozzi Vittorio, Menna Costantino (2025-10)
    Experimental and Analytical Assessment of the in-Plane Behaviour of 3D Printed Concrete Walls Subjected to Cyclic Loads
  37. Sakha Mahsa, Raza Saim, Wang Xiaomeng, Fan Haifeng et al. (2025-10)
    Design Optimization and Assessment of Stay-in-Place 3D Printed Concrete Formwork for Slabs
  38. Santhanam Manu (2025-10)
    Multi-Scale Assessment of the Structural Performance of 3D Printed Concrete
  39. Ye Htun Thet, Panuwatwanich Kriengsak, Tanapornraweekit Ganchai, Jongvisuttisun Passarin et al. (2025-10)
    Carbon Emission Assessment of 3D Printed Hybrid Modular Concrete Building:
    Work Breakdown Structure
  40. Bai Meiyan, Xiao Jianzhuang, Ding Tao, Chen Weihua (2025-09)
    Integrated Non-Destructive Assessment of 3D Printed UHPC Microstructure Using X-Ray Computed Tomography and Ultrasonic Waves
  41. Nasr Ahmed, Wang Jiyuan, Duan Zhenhua, Deng Qi et al. (2025-09)
    Assessing the Visibility and Impact of Recycled High-Density Polyethylene Fibers in 3D-Printed Cementitious Composites
  42. Tarhan İsmail, Tarhan Yeşim (2025-09)
    Nonlinear In-Plane Response of 3D-Printed Concrete Walls with Varied Infill Patterns:
    Experimental Mix Design and Numerical Structural Assessment
  43. Bhagat Rajesh, Pande Prashant, Madurwar Kamlesh, Raut Jayant et al. (2025-09)
    Life Cycle Assessment of 3D-Printed Building Materials Towards Sustainability-Driven Optimization and Environmental Impact Analysis Using Computational Intelligence Techniques
  44. Oulkhir Fatima, Akhrif Iatimad, Jai Mostapha, Rihani Nadir (2025-07)
    Clay and Alginate-Based Mixtures 3D Printing:
    A Numerical Procedure for Shape Stability and Buildability Assessment
  45. Iqbal Imtiaz, Besklubova Svetlana, Kasim Tala (2025-07)
    Assessment Framework for 3D Concrete Printing Technology in Alignment with Construction 5.0 Criteria
  46. Lu Chenyu, Sun Dongpu, Shen Qiang, Zhang Zhigang et al. (2025-07)
    Buildability of 3D Printing Engineered Cementitious Composites (ECC):
    A Comprehensive Assessment Framework Under Laboratory Conditions
  47. Cui Weijiu, Guo Ruyi, Liu Wenliang, Da Wan et al. (2025-07)
    Quality Assessment of 3D‐Printed Concrete Through Quantitative Visual Inspection
  48. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2025-07)
    Squeeze Test:
    A Toolkit for Assessing the Printability of Stiff Cement-Based Materials.
  49. Anop Darya, Sadenova Marzhan, Beisekenov Nail, Rudenko Olga et al. (2025-07)
    Additive Manufacturing as an Alternative to Core Sampling in Concrete Strength Assessment
  50. Raza Muhammad, Kravchenko Ekaterina, Besklubova Svetlana, Lazorenko Georgy et al. (2025-07)
    3D Printing of Recycled Materials for Sustainable Construction:
    A Comprehensive Economic and Life Cycle Assessment
  51. Šána Vladimír, Litoš Jiří (2025-07)
    Load-Bearing Capacity of the 3D Printed Concrete Structure Based on a Static Assessment and Load Test in Scale 1:1
  52. Zuo Zibo, Huang Yulin, Corte Wouter (2025-06)
    Real-Time Monitoring of Printed Concrete Weight During 3D Concrete Printing to Inversely Assess Process Stability:
    Indicators and Experiments
  53. Cui Weijiu, Ji Dongsheng, Shen Liang, Su Shiyong et al. (2025-06)
    A Neural Network-Based Model for Assessing 3D Printable Concrete Performance in Robotic Fabrication
  54. Sakhare Vishakha, Khairnar Neha, Dahatonde Ulka, Mashalkar Shilpa (2025-06)
    Review on Sustainability in 3D Concrete Printing:
    Focus on Waste Utilization and Life Cycle Assessment
  55. Oseji Samuel, Chukwuemeka Prince, Imoni Okes (2025-06)
    Artificial Intelligence in 3D Printed Concrete:
    Sustainability Assessment and Implementation Challenges
  56. Sakha Mahsa, Raza Saim, Wang Xiaomeng, Fan Haifeng et al. (2025-06)
    Assessment of Post-Tension Capacity in Novel 3D-Printed Topology:
    Optimized Formwork via Load Transfer Testing
  57. Gailitis Rihards, Radina Liga, Pakrastins Leonids, Sprince Andina (2025-06)
    Mechanical and Early Long-Term Property Assessment of Foamed 3D-Printable Geopolymer Composite
  58. Mahdy Deena, Marais Eugene, Abdelrahim Marwa, Dubor Alexandre et al. (2025-06)
    Life Cycle Assessment of Earth-Based Residential Unit “TOVA”:
    A 3D Printed On-Site Load-Bearing Structure
  59. Sarıkaya M., Benam Shaghayegh, Yılmaz Taner, Erkmen Bülent et al. (2025-05)
    Seismic Performance Assessment of 3D-Printed Concrete Structures
  60. Zahabizadeh Behzad, Pereira João, Pereira Eduardo, Cunha Vítor (2025-05)
    Self-Healing Assessment of Fiber Reinforced Cementitious Mortars Developed for 3D Concrete Printing:
    Recovery of Mechanical Performance and Self-Sealing Capability
  61. Mishra Sanjeet, Snehal K., Das B., Chandrasekaran Rajasekaran et al. (2025-05)
    From Printing to Performance:
    A Review on 3D Concrete Printing Processes, Materials, and Life Cycle Assessment
  62. Khanverdi Mohsen, Das Sreekanta (2025-03)
    Testing Prisms as a Method for Assessing Compressive Properties of 3D-Printed Structural Members:
    Experimental and Numerical Studies
  63. Dey Dhrutiman, Panda Biranchi, Shukla Yash, Rawal Rajan (2025-03)
    A Comprehensive Assessment of Thermal Performance of 3D Printed Concrete Lattice Walls
  64. An Xuehui, Liang Qimin, Li Pengfei, You Wei et al. (2025-02)
    Experimental Assessment on Printing Performance and Mechanical Properties of Underwater Self-Protecting 3D Printing Concrete
  65. Arash Motalebi, Mohammad Aba, Golam Kabir (2025-01)
    Assessing the Environmental Impact of Building Houses in Remote Areas:
    3D Printing vs. Traditional Construction Techniques
  66. Kumar Soni Ashish, Anil Sangwai Keyur, Panda Biranchi (2025-01)
    In-Process Monitoring and Quality-Assessment of 3D Concrete Printing Process
  67. Vlieger Jentel, Blaakmeer Jan, Gruyaert Elke, Cizer Özlem (2025-01)
    Assessing Static and Dynamic Yield-Stress of 3D Printing Mortar with Recycled Sand:
    Influence of Sand-Geometry, Fineness Modulus, and Water-to-Binder Ratio
  68. Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
    Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
    From Material-Design to Structural Bearing-Capacity-Assessment
  69. Lolli Francesca, Mehlomakulu Bungane, Monkman Sean (2025-01)
    Case Study of 3D Printed Concrete as Compared to Conventional Construction:
    Structural Comparison and Life Cycle Carbon Assessment
  70. Pfleger Marc-Patrick, Sam Nina, Radl Elisabeth, Vill Markus (2025-01)
    Assessment of the Suitability of Carbon Long Fibers as Reinforcement for Additively Manufactured Components
  71. Souza Eduarda, Rodrigues e Silva Rafaela, Ribeiro Borges Paulo (2025-01)
    Overburden Materials from the Iron Mining as Raw Materials for AAM:
    Preliminary Assessment of Mixes for 3D Concrete Printing
  72. Bahoria Boskey, Bhagat Rajesh, Pande Prashant, Raut Jayant et al. (2024-12)
    Design-Optimization of 3D Printed Concrete Elements Considering Life Cycle Assessment and Life Cycle Costing
  73. Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
    Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
    Materials, Engineered Properties and Techniques for Additive Manufacturing
  74. Avancini Victor, Quintana-Ruiz Osvaldo, Campello Eduardo (2024-12)
    Assessing 3D Printed Concrete Process Parameters Through Discrete Element Modeling
  75. Raza Muhammad, Besklubova Svetlana, Zhong Ray (2024-11)
    Comparative Environmental Value-Stream-Assessment of Off-Site and On-Site 3D Construction Printing Processes
  76. Lu Haoyu, Zhang Lizhi, Wang Junkai, Shi Zhaoxin et al. (2024-11)
    Penetration-Test of Sheet-Like Indenter for Yield-Stress-Assessment of 3D Printed Concrete
  77. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
    3D Printing of a Multi-Performative Facade:
    Assessment of Air Permeability, Water Tightness, Wind Loads, and Impact Resistance
  78. Cheibas Ina, Gamote Ringo, Lloret-Fritschi Ena, Arnold Kilian et al. (2024-11)
    3D Printing of a Multi-Performative Building Envelope:
    Assessment of Air-Permeability, Water-Tightness, Wind-Loads, and Impact-Resistance
  79. Sreenivas Gagan, Rizzieri Giacomo, Bhattacherjee Shantanu, Jain Smrati et al. (2024-11)
    Experimental and Numerical Assessment of Layer Deformation in a 3D Printed Concrete Element
  80. Shahzad Qamar, Li Fangyuan (2024-11)
    Assessing the Load-Bearing Capacity of 3D Printed Concrete at Early-Ages:
    An Innovative Approach
  81. Nashed Kabalan Ola, Ciblac Thierry, Marceau Sandrine, Roy Robert (2024-11)
    Advancing Raw Earth Reinforcement for 3D Printed Architecture:
    Durability-Assessment
  82. Eid Zainab, Almerbati Nehal (2024-10)
    Methodologies to Assess the Environmental Impact of 3D Printed Buildings Using Construction Waste
  83. Adamtsevich Liubov, Pustovgar Andrey, Adamtsevich Aleksey (2024-10)
    Assessing the Prospects and Risks of Delivering Sustainable Urban Development Through 3D Concrete Printing Implementation
  84. Chamatete Kunda, Yalçınkaya Çağlar (2024-10)
    Numerical Assessment of Thermal Bridging Effects in 3D Printed Foam-Concrete Walls
  85. Lan Tian, Yang Shutong, Xu Mingqi, Chen Zhengyuan et al. (2024-10)
    Quantitative Assessment of Interfacial-Fracture-Properties in 3D Printed Alkali-Activated Recycled Sand Concrete Based on a Closed-Form Fracture-Model
  86. Jin Willy, Roux Charlotte, Ouellet-Plamondon Claudiane, Caron Jean-François (2024-09)
    Life Cycle Assessment of Limestone-Calcined-Clay-Concrete:
    Potential for Low-Carbon 3D Printing
  87. Mahdy Deena, Abdelrahim Marwa, Alatassi Adel (2024-09)
    Assessment of Air-Flow Performance Through Openings in 3D Printed Earthen Structure Using CFD Analysis
  88. Weger Daniel, Gartner Benjamin, Rausch Anne, Schießl-Pecka Angelika et al. (2024-09)
    Realization of a Reinforced SPI Façade:
    Direction-Dependent Material-Properties and Durability-Assessment
  89. Lima Lucas, Wangler Timothy, Sanchez Asel, Anton Ana-Maria et al. (2024-09)
    Durability of 3D Printed Concrete:
    Performance-Assessment of a Two-Component System Against Water Absorption, Carbonation, and Chloride-Ingress
  90. Valera Hugo, Pimentel Tinoco Matheus, Mendoza Reales Oscar, Toledo Filho Romildo et al. (2024-09)
    Rheological and 3D Printing-Assessment of Sisal-Fiber Mortar for Architectural Applications
  91. Hüsken Götz, Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph (2024-09)
    An Assessment of the Repeatability of 3D Printed Concrete Structures
  92. Paritala Spandana, Singh Prashant, Kamakshi Tippabhotla, Subramaniam Kolluru (2024-09)
    Assessment of Printability of Concrete Based on Packing of Aggregates
  93. Thiel Charlotte, Hechtl Christian, Gehlen Christoph, Kränkel Thomas (2024-09)
    Sustainability Potential of Additive Manufactured Concrete Structures:
    Studies on the Life Cycle Assessment and Circularity of an Extruded Exterior Wall
  94. Schneider Philip, Dietrich Sebastian, Richter Christiane, Asl Reza et al. (2024-09)
    Fabrication-Aware Design Method and Experimental Assessment of a Segmented Concrete Pedestrian Bridge Using SPI Technology.
  95. Rasehorn Inken, Ehm Clemens, Frohmüller Max, Schaudienst Falk et al. (2024-09)
    Development and Holistic Suitability-Assessment of 3D Printable Mortar
  96. Hassan Zohaib, Bernal Susan, Raza Saim, Kammer David et al. (2024-09)
    Feasibility-Assessment of 3D Printability of Portland-Cement-Steel-Slag Blended Mortar
  97. Wolfs Robert, Bos Derk, Caron Jean-François, Gerke Markus et al. (2024-08)
    On-Line and In-Line Quality-Assessment Across All Scale Levels of 3D Concrete Printing
  98. Shahzad Qamar, Li Fangyuan (2024-08)
    Assessment of Load-Bearing Capacity and Buildability Failures in 3D Printed Concrete Structures
  99. Ahmed Salma, Romdhane Lotfi, Sayegh Sameh, Manjikian Solair (2024-08)
    Risk-Assessment for 3D Printing in Construction Projects
  100. Jones Kathryn, Li Mo (2024-07)
    Life Cycle Assessment of Additively Manufactured Foundations for Ultratall Wind Turbine Towers
  101. Raza Muhammad, Besklubova Svetlana, Zhong Ray (2024-07)
    Economic Analysis of Offsite and Onsite 3D Construction Printing Techniques for Low-Story Buildings:
    A Comparative Value-Stream-Assessment
  102. Ye Junhong, Zhuang Zicheng, Teng Fei, Yu Jie et al. (2024-07)
    Comparative Environmental-Assessment of 3D Concrete Printing with Engineered Cementitious Composites
  103. Šahmenko Genādijs, Puzule Līga, Sapata Alise, Šlosbergs Pēteris et al. (2024-06)
    Gypsum-Cement-Pozzolan Composites for 3D Printing:
    Properties and Life Cycle Assessment
  104. Mantha Bharadwaj, Sati Ala, Hosny Fatma, Abdallah Mohamed et al. (2024-06)
    A Generic 3D Printing Life Cycle Assessment (LCA) Framework for AEC Applications
  105. Senthilnathan Shanmugaraj, Raphael Benny (2024-06)
    Buildability-Assessment of 3D Printed Concrete Elements Through Computer-Vision
  106. Ahmed Hassan, Giwa Ilerioluwa, Game Daniel, Arce Gabriel et al. (2024-04)
    Automated Reinforcement During Large-Scale Additive Manufacturing:
    Structural-Assessment of a Dual Approach
  107. Tao Yaxin, Zhou Jiangang, Cui Weijiu, Shi Xinyu et al. (2024-04)
    Numerical Assessment of Plastic Yielding in Extrusion-Based 3D Concrete Printing
  108. Alhaidary Haidar (2024-03)
    Three-Dimensional Concrete Printing as a Construction-Automation-Strategy and Assessments from a Case Study Building
  109. Carcassi Olga, Maierdan Yierfan, Akemah Tashania, Kawashima Shiho et al. (2024-03)
    Maximizing Fiber-Content in 3D Printed Earth Materials:
    Printability, Mechanical, Thermal and Environmental Assessments
  110. Damarla Ravikanth, Lakshmi Keshav (2024-03)
    A Review on Impact-Assessment of 3D Printing Technology in the Field of Modern Construction
  111. Chen Mingxu, Xu Jiabin, Yuan Lianwang, Zhao Piqi et al. (2024-03)
    Use of Creep and Recovery-Protocol to Assess the Printability of Fiber-Reinforced 3D Printed White-Portland-Cement Composites
  112. Escobar-Valencia Esteban, Capet J., Brière J., Ferngau E. (2024-03)
    Hydraulic and Geotechnical Assessments of a Large 3D Printed Artificial Reef in Sands
  113. Kotov Evgeny, Nemova Darya, Sergeev Vitaly, Dontsova Anna et al. (2024-03)
    Thermal Performance-Assessment of Aerogel Application in Additive Construction of Energy-Efficient Buildings
  114. Curth Alexander, Pearl Natalie, Castro-Salazar Angelica, Mueller Caitlin et al. (2024-03)
    3D Printing Earth:
    Local, Circular Material Processing, Fabrication Methods, and Life Cycle Assessment
  115. Bianchi Iacopo, Volpe Stelladriana, Fiorito Francesco, Forcellese Archimede et al. (2024-01)
    Life Cycle Assessment of Building Envelopes Manufactured Through Different 3D Printing Technologies
  116. Rehman Atta, Kim Ik-Gyeom, Kim Jung-Hoon (2024-01)
    Towards Full Automation in 3D Concrete Printing Construction:
    Development of an Automated and In-Line Test-Method for In-Situ Assessment of Structural Build-Up and Quality of Concrete
  117. Pi Yilin, Lu Cong, Yao Yiming, Li Baoshan (2024-01)
    A Rheological-Based Printability-Assessment Method for 3D Printing Engineered Cementitious Composites Considering Fiber-Dispersion
  118. Suthar Mahendrabhai, Shariff Najeeb, Nanthagopalan Prakash (2023-12)
    Performance-Assessment of Topologically Optimised 3D Printable Concrete Sewer Cross-Section Using Finite Element Simulation
  119. Genc Gokhan, Demircan Ruya, Beyhan Figen, Kaplan Gökhan (2023-10)
    Assessment of the Sustainability and Producibility of Adobe-Constructions Reinforced with Ca-Based Binders:
    Environmental Life-Cycle-Analysis and 3D Printability
  120. Meng Qingcheng, Hu Lei, Li Mingjian, Qi Xin (2023-09)
    Assessing the Environmental Impact of Building Life Cycle:
    A Carbon-Reduction-Strategy Through Innovative Design, Intelligent Construction, and Secondary Utilization
  121. Asensio Javier, Josa Irene, Monserrat Andrea, Fuente Albert (2023-09)
    3D‐Printed Concrete Footbridges:
    An Approach to Assess the Sustainability Performance
  122. Quah Tan, Vo Tran, Tay Yi, Tan Ming et al. (2023-09)
    Real-Time-Assessment of Smart Concrete Inspection with Piezoelectric Sensors
  123. Shahzad Qamar, Li Fangyuan (2023-09)
    An Innovative Method for Buildability-Assessment of 3D Printed Concrete at Early-Ages
  124. Motalebi Arash, Khondoker Mohammad, Kabir Golam (2023-08)
    A Systematic Review of Life Cycle Assessments of 3D Concrete Printing
  125. Pedrosa Ana, Gaspar Florindo (2023-08)
    Rheology-Assessment of Mortar-Materials for Additive Manufacturing
  126. Heywood Kate, Nicholas Paul (2023-06)
    Sustainability and 3D Concrete Printing:
    Identifying a Need for a More Holistic Approach to Assessing Environmental Impacts
  127. Jones Kathryn, Li Mo (2023-06)
    Life Cycle Assessment of Ultra-Tall Wind Turbine Towers Comparing Concrete Additive Manufacturing to Conventional Manufacturing
  128. Kokare Samruddha, Oliveira João, Godina Radu (2023-05)
    Life Cycle Assessment of Additive Manufacturing Processes:
    A Review
  129. Leschok Matthias, Cheibas Ina, Piccioni Valeria, Seshadri Bharath et al. (2023-05)
    3D Printing Facades:
    Design, Fabrication, and Assessment Methods
  130. Mohan Manu, Rahul Attupurathu, Stappen Jeroen, Cnudde Veerle et al. (2023-05)
    Assessment of Pore-Structure Characteristics and Tortuosity of 3D Printed Concrete Using Mercury-Intrusion-Porosimetry and X-Ray Tomography
  131. Ma Guowei, Huang Chen, Zhang Junfei (2023-04)
    Inner Damage-Identification and Residual Strength-Assessment of a 3D Printed Tunnel with Marble-Like Cementitious Materials Using Piezoelectric Transducers
  132. Onanuga Babajide, Biernacki Joseph (2023-03)
    Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials
  133. Zhang Ruo-Chen, Wang Li, Xue Xuan, Ma Guowei (2023-02)
    Environmental Profile of 3D Concrete Printing Technology in Desert Areas via Life Cycle Assessment
  134. Pons-Valladares Oriol, Casanovas-Rubio Maria, Armengou Jaume, Fuente Albert (2023-02)
    Approach for Sustainability-Assessment for Footbridge Construction Technologies:
    Application to the First World D-Shape 3D Printed Fiber-Reinforced Mortar Footbridge in Madrid
  135. Baghdadi Abtin, Ledderose Lukas, Ameri Shaghayegh, Kloft Harald (2023-02)
    Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of Robotic CNC Manufacturing Technique
  136. Tran Mien, Vu Tran, Nguyen Thi (2023-01)
    Simplified Assessment for One-Part 3D Printable Geopolymer Concrete Based on Slump and Slump-Flow Measurements
  137. Sambucci Matteo, Biblioteca Ilario, Valente Marco (2023-01)
    Life Cycle Assessment (LCA) of 3D Concrete Printing and Casting Processes for Cementitious Materials Incorporating Ground Waste Tire Rubber
  138. Baghdadi Abtin, Heristchian Mahmoud, Ledderose Lukas, Kloft Harald (2023-01)
    Experimental and Numerical Assessments of New Concrete Dry Connections Concerning Potentials of the Robotic Subtractive Manufacturing Technique
  139. Vlieger Jentel, Boehme Luc, Blaakmeer Jan, Li Jiabin (2023-01)
    Buildability-Assessment of Mortar with Fine Recycled Aggregates for 3D Printing
  140. Khalili Tari Mohammadreza, Reza Faraji Amir, Aslani Alireza, Zahedi Rahim (2023-01)
    Energy Simulation and Life Cycle Assessment of a 3D Printable Building
  141. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Ozcelikci Emircan et al. (2022-12)
    Rheological Property and Extrudability Performance-Assessment of Construction and Demolition Waste-Based Geopolymer Mortars with Varied Testing Protocols
  142. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2022-12)
    Assessing Printing Synergism in a Dual 3D Printing System for Ultra-High-Performance Concrete In-Process Reinforced Cementitious Composite
  143. Roux Charlotte, Kuzmenko Kateryna, Roussel Nicolas, Mesnil Romain et al. (2022-11)
    Life Cycle Assessment of a Concrete 3D Printing Process
  144. Mir Namra, Khan Shoukat, Kul Anil, Şahin Oğuzhan et al. (2022-08)
    Life Cycle Assessment of Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing
  145. Ebrahimi Mahdi, Mohseni Mohammad, Aslani Alireza, Zahedi Rahim (2022-08)
    Investigation of Thermal Performance and Life Cycle Assessment of a 3D Printed Building
  146. Inaty Francois, Baz Bilal, Aouad Georges (2022-07)
    Long-Term Durability-Assessment of 3D Printed Concrete
  147. Yoris-Nobile Adrian, Lizasoain-Arteaga Esther, Slebi-Acevedo Carlos, Blanco-Fernandez Elena et al. (2022-07)
    Life-Cycle-Assessment and Multi-Criteria Decision-Making-Analysis to Determine the Performance of 3D Printed Cement Mortars and Geopolymers
  148. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-07)
    The Theory of Critical Distances to Perform the Static Assessment of 3D Printed Concrete Weakened by Manufacturing-Defects and Cracks
  149. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2022-06)
    Printability-Assessment of Cement-Based Materials Using Uniaxial Compression-Test
  150. Marcucci Andrea, Kompella Sriram, Monte Francesco, Levi Marinella et al. (2022-06)
    Early-Age Shear and Tensile Fracture Properties of 3D Printable Cementitious Mortar to Assess Printability Window
  151. Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2022-06)
    Monitoring Strain Using Digital Image Correlation During Compressive and Tensile Loading:
    Assessment of Critical Strain of Cement-Based Materials Containing VMA
  152. Kolawole John, Becker Daniel, Xu Jie, Dobrzanski James et al. (2022-06)
    Selected Test-Methods for Assessing Fresh and Plastic-State 3D Concrete Printing-Materials
  153. Gislason Styrmir, Bruhn Simon, Breseghello Luca, Sen Burak et al. (2022-06)
    Porous 3D Printed Concrete Beams Show an Environmental Promise:
    A Cradle-to-Grave Comparative Life Cycle Assessment
  154. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
    Assessing the Fresh Properties of Printable Cement-Based Materials:
    High-Potential Tests for Quality-Control
  155. Alanazi Nawaf, Kolawole John, Buswell Richard, Susmel Luca (2022-05)
    The Theory of Critical Distances to Assess the Effect of Cracks & Manufacturing-Defects on the Static Strength of 3D Printed Concrete
  156. Ennab Lena, Dixit Manish, Birgisson Bjorn, Kumar Pranav (2022-04)
    Comparative Life Cycle Assessment of Large-Scale 3D Printing Utilizing Kaolinite-Based Calcium-Sulfoaluminate-Cement Concrete and Conventional Construction
  157. Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
    Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
    A Systematic Literature Review
  158. Ivanova Irina, Ivaniuk Egor, Bisetti Sameercharan, Nerella Venkatesh et al. (2022-03)
    Comparison Between Methods for Indirect Assessment of Buildability in Fresh 3D Printed Mortar and Concrete
  159. Mohan Manu, Rahul Attupurathu, Dam Benjamin, Zeidan Talina et al. (2022-02)
    Performance Criteria, Environmental Impact and Cost-Assessment for 3D Printable Concrete Mixtures
  160. Nguyen Ngoc, Bui Tan-Trung, Bui Quoc-Bao (2022-02)
    Fiber-Reinforced Concrete for Slabs without Steel-Rebar-Reinforcement:
    Assessing the Feasibility for 3D Printed Individual Houses
  161. Harbouz Ilhame, Rozière Emmanuel, Yahia Ammar, Loukili Ahmed (2022-02)
    Printability-Assessment of Cement-Based Materials Based on Rheology, Hydration Kinetics, and Viscoelastic Properties
  162. Diggs-McGee Brandy, Kreiger Eric (2021-12)
    Using Isolated Temporal Analysis to Aid in the Assessment of Structural Element Quality for Additive Construction
  163. Şahin Hatice, Mardani Ali (2021-12)
    Assessment of Materials, Design Parameters and Some Properties of 3D Printing Concrete Mixtures:
    A State of the Art Review
  164. Kompella Sriram, Monte Francesco, Cucchi Marco, Marcucci Andrea et al. (2021-12)
    A Methodology to Assess Early-Age Fracture Performance of 3D Printable Cementitious Mixes
  165. Moini Mohamadreza, Olek Jan, Zavattieri Pablo, Youngblood Jeffrey (2021-12)
    Open-Span Printing Method for Assessment of Early-Age Deformations of Additively Manufactured Cement-Based Materials Using an Isosceles Triangle
  166. Verian Kho, Ashcroft Jarron, Ziemlaski Jim, Brodesser Tim et al. (2021-12)
    The Assessment of the Buildability and Inter-Layer Adhesion Strength of 3D Printed Mortar
  167. Nair Sooraj, Sant Gaurav, Neithalath Narayanan (2021-11)
    Mathematical Morphology-Based Point-Cloud-Analysis-Techniques for Geometry-Assessment of 3D Printed Concrete Elements
  168. Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2021-11)
    Role of Chemical Admixtures on 3D Printed Portland Cement:
    Assessing Rheology and Buildability
  169. Chang Ze, Xu Yading, Chen Yu, Gan Yidong et al. (2021-05)
    A Discrete Lattice-Model for Assessment of Buildability Performance of 3D Printed Concrete
  170. Bos Freek, Kruger Jacques, Lucas Sandra, Zijl Gideon (2021-04)
    Juxtaposing Fresh Material-Characterisation-Methods for Buildability-Assessment of 3D Printable Cementitious Mortars
  171. Baz Bilal, Aouad Georges, Kleib Joelle, Bulteel David et al. (2021-04)
    Durability-Assessment and Micro-Structural Analysis of 3D Printed Concrete Exposed to Sulfuric-Acid Environments
  172. Marais Hannelie, Christen Heidi, Cho Seung, Villiers Wibke et al. (2021-03)
    Computational Assessment of Thermal Performance of 3D Printed Concrete Wall Structures with Cavities
  173. Muñoz Ivan, Madrid Javier, Muñiz Manuel, Uhart Maylis et al. (2021-01)
    Life Cycle Assessment of Integrated Additive-Subtractive Concrete 3D Printing
  174. Mohammad Malek, Masad Eyad, Ghamdi Sami (2020-12)
    3D Concrete Printing Sustainability:
    A Comparative Life Cycle Assessment of Four Construction Method Scenarios
  175. Jacquet Yohan, Perrot Arnaud, Picandet Vincent (2020-11)
    Assessment of Asymmetrical Rheological Behavior of Cementitious Material for 3D Printing Application
  176. Kuzmenko Kateryna, Gaudillière-Jami Nadja, Féraille Adélaïde, Dirrenberger Justin et al. (2020-09)
    Assessing the Environmental Viability of 3D Concrete Printing Technology
  177. Han Yilong, Yang Zhihan, Ding Tao, Xiao Jianzhuang (2020-08)
    Environmental and Economic Assessment on 3D Printed Buildings with Recycled Concrete
  178. Ortega Guillermo, Madrid Javier, Olsson Nils, Tenorio Ríos José (2020-08)
    The Application of 3D Printing Techniques in the Manufacturing of Cement-Based Construction Products and Experiences Based on the Assessment of Such Products
  179. Esposito Laura, Menna Costantino, Asprone Domenico, Rossino Chiara et al. (2020-07)
    An Experimental Testing Procedure to Assess the Buildability Performance of 3D Printed Concrete Elements
  180. Ducoulombier Nicolas, Carneau Paul, Mesnil Romain, Demont Léo et al. (2020-07)
    The Slug-Test:
    In-Line-Assessment of Yield-Stress for Extrusion-Based Additive Manufacturing
  181. Zuo Wenqiang, Keita Emmanuel, Bornert Michel, Roussel Nicolas (2020-07)
    Drying of 3D Printed Mortar Filaments at Early-Age Assessed by X-Ray Computed Tomography
  182. Jacquet Yohan, Picandet Vincent, Rangeard Damien, Perrot Arnaud (2020-07)
    Gravity-Driven Tests to Assess Mechanical Properties of Printable Cement-Based Materials at Fresh State
  183. Figueiredo Stefan, Overmeir Anne, Nefs Karsten, Schlangen Erik et al. (2020-07)
    Quality-Assessment of Printable Strain-Hardening Cementitious Composites Manufactured in Two Different Printing Facilities
  184. Cho Seung, Kruger Jacques, Bester Frederick, Heever Marchant et al. (2020-07)
    A Compendious Rheo-Mechanical Test for Printability-Assessment of 3D Printable Concrete
  185. Alhumayani Hashem, Gomaa Mohamed, Soebarto Veronica, Jabi Wassim (2020-06)
    Environmental Assessment of Large-Scale 3D Printing in Construction:
    A Comparative Study between Cob and Concrete
  186. Assaad Joseph, Hamzeh Farook, Hamad Bilal (2020-05)
    Qualitative Assessment of Interfacial Bonding in 3D Printing Concrete Exposed to Frost-Attack
  187. Baz Bilal, Aouad Georges, Leblond Philippe, Mansouri Omar et al. (2020-05)
    Mechanical Assessment of Concrete:
    Steel Bonding in 3D Printed Elements
  188. Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
    Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach
  189. Rahul Attupurathu, Sharma Abhishek, Santhanam Manu (2020-01)
    A Desorptivity-Based Approach for the Assessment of Phase Separation During Extrusion of Cementitious Materials
  190. Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2020-01)
    Yield-Stress-Criteria to Assess the Buildability of 3D Concrete Printing
  191. Lafhaj Zoubeir, Rabenantoandro Andry, Moussaoui Soufiane, Dakhli Zakaria et al. (2019-12)
    Experimental Approach for Printability-Assessment:
    Toward a Practical Decision-Making Framework of Printability for Cementitious Materials
  192. Yao Yue, Hu Mingming, Maio Francesco, Cucurachi Stefano (2019-08)
    Life Cycle Assessment of 3D Printing Geopolymer Concrete:
    An Ex‐Ante Study
  193. Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2019-01)
    Direct-Shear-Test for the Assessment of Rheological Parameters of Concrete for 3D Printing Applications
  194. Agustí-Juan Isolda, Jipa Mihail-Andrei, Habert Guillaume (2018-11)
    Environmental Assessment of Multi-Functional Building Elements Constructed with Digital Fabrication Techniques
  195. Kumar Nitish, Hack Norman, Dörfler Kathrin, Walzer Alexander et al. (2017-06)
    Design, Development and Experimental Assessment of a Robotic End-Effector for Non-Standard Concrete Applications
  196. Agustí-Juan Isolda, Müller Florian, Hack Norman, Wangler Timothy et al. (2017-04)
    Potential Benefits of Digital Fabrication for Complex Structures:
    Environmental Assessment of a Robotically Fabricated Concrete Wall