#life¶
Keywords by Co - Occurrence¶
- Nayak Anitha, Nayaka Ramesh, Zhang Y. (2026-04)
Performance Evaluation, Microstructure Behaviour and Life Cycle Assessment of 3D Concrete Printable Ink Containing Recycled Construction Waste - Mastropasqua Antonio, Lagrasta Francesco, Nicolò Michele, Pontrandolfo Pierpaolo (2026-03)
Investigating the Environmental Impact of Additive Construction:
A Systematic Analysis of the Life Cycle Assessment Studies - Ekinci Mehmet, Belendir Utku, Demiral Nazim, Şahin Oğuzhan et al. (2026-03)
Sustainable Lightweight Thermal Insulating Geopolymer Mortars from End-of-Life Materials for 3D Printing. - Ding Shengxuan, Li Jiren, Wang Mingqiang (2026-02)
Mechanical Performance and Life-Cycle Carbon Reduction Benefits of 3D-Printed Permanent-Formwork Columns Filled with Low-Magnesia Concrete - Lolli Francesca, Mehlomakulu Bungane, Azari Jafari Hessam, Kirchain Randolph et al. (2026-02)
On the Sustainability of Digital Construction:
Whole Building Life Cycle Carbon Emissions According to Three Construction Techniques - Kocaer Öznur (2026-02)
Environmental Assessment of Waste-Derived Materials in 3D Concrete Printing and Cast-in-Place Construction Through a BIM-Integrated Multi-Scale Life Cycle Assessment Framework - Shilar Fatheali, Shilar Mubarakali (2025-12)
Performance-Based Analysis of 3D Printed Geopolymers Relating Durability, Microstructure, and Life Cycle Assessment - Nair Sajitha, Nagarajan Praveen, Thampi Santosh, Das Sudha et al. (2025-10)
Life Cycle-Based Sustainability Assessment of Optimized 3D Printable Concrete Mixes Incorporating Scms and Recycled Aggregates - Masri Abdullah, Vazquez Elaine, Haddad Assed, Najjar Mohammed (2025-10)
Life Cycle Costing in 3D Printing:
A Literature Review - Bhagat Rajesh, Pande Prashant, Madurwar Kamlesh, Raut Jayant et al. (2025-09)
Life Cycle Assessment of 3D-Printed Building Materials Towards Sustainability-Driven Optimization and Environmental Impact Analysis Using Computational Intelligence Techniques - Raza Muhammad, Kravchenko Ekaterina, Besklubova Svetlana, Lazorenko Georgy et al. (2025-07)
3D Printing of Recycled Materials for Sustainable Construction:
A Comprehensive Economic and Life Cycle Assessment - Sakhare Vishakha, Khairnar Neha, Dahatonde Ulka, Mashalkar Shilpa (2025-06)
Review on Sustainability in 3D Concrete Printing:
Focus on Waste Utilization and Life Cycle Assessment - Mahdy Deena, Marais Eugene, Abdelrahim Marwa, Dubor Alexandre et al. (2025-06)
Life Cycle Assessment of Earth-Based Residential Unit “TOVA”:
A 3D Printed On-Site Load-Bearing Structure - Mishra Sanjeet, Snehal K., Das B., Chandrasekaran Rajasekaran et al. (2025-05)
From Printing to Performance:
A Review on 3D Concrete Printing Processes, Materials, and Life Cycle Assessment - Sangiorgio Valentino, Bianchi Iacopo, Forcellese Archimede (2025-02)
Advancing Decarbonization Through 3D Printed Concrete Formworks:
LIFE Cycle Analysis of Technologies, Materials, and Processes - Lolli Francesca, Mehlomakulu Bungane, Monkman Sean (2025-01)
Case Study of 3D Printed Concrete as Compared to Conventional Construction:
Structural Comparison and Life Cycle Carbon Assessment - Bahoria Boskey, Bhagat Rajesh, Pande Prashant, Raut Jayant et al. (2024-12)
Design-Optimization of 3D Printed Concrete Elements Considering Life Cycle Assessment and Life Cycle Costing - Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
Materials, Engineered Properties and Techniques for Additive Manufacturing - Jin Willy, Roux Charlotte, Ouellet-Plamondon Claudiane, Caron Jean-François (2024-09)
Life Cycle Assessment of Limestone-Calcined-Clay-Concrete:
Potential for Low-Carbon 3D Printing - Kul Anil, Kocaer Öznur, Lucas Sandra (2024-09)
Anisotropic Characteristics of 3D Printed Geopolymer Mortars from End-of-Life Materials of Construction Industry - Thiel Charlotte, Hechtl Christian, Gehlen Christoph, Kränkel Thomas (2024-09)
Sustainability Potential of Additive Manufactured Concrete Structures:
Studies on the Life Cycle Assessment and Circularity of an Extruded Exterior Wall - Jones Kathryn, Li Mo (2024-07)
Life Cycle Assessment of Additively Manufactured Foundations for Ultratall Wind Turbine Towers - Šahmenko Genādijs, Puzule Līga, Sapata Alise, Šlosbergs Pēteris et al. (2024-06)
Gypsum-Cement-Pozzolan Composites for 3D Printing:
Properties and Life Cycle Assessment - Mantha Bharadwaj, Sati Ala, Hosny Fatma, Abdallah Mohamed et al. (2024-06)
A Generic 3D Printing Life Cycle Assessment (LCA) Framework for AEC Applications - Curth Alexander, Pearl Natalie, Castro-Salazar Angelica, Mueller Caitlin et al. (2024-03)
3D Printing Earth:
Local, Circular Material Processing, Fabrication Methods, and Life Cycle Assessment - Bianchi Iacopo, Volpe Stelladriana, Fiorito Francesco, Forcellese Archimede et al. (2024-01)
Life Cycle Assessment of Building Envelopes Manufactured Through Different 3D Printing Technologies - Bekaert Michiel, Tittelboom Kim, Schutter Geert (2023-10)
The Effect of Curing Conditions on the Service Life of 3D Printed Concrete Formwork - Genc Gokhan, Demircan Ruya, Beyhan Figen, Kaplan Gökhan (2023-10)
Assessment of the Sustainability and Producibility of Adobe-Constructions Reinforced with Ca-Based Binders:
Environmental Life-Cycle-Analysis and 3D Printability - Meng Qingcheng, Hu Lei, Li Mingjian, Qi Xin (2023-09)
Assessing the Environmental Impact of Building Life Cycle:
A Carbon-Reduction-Strategy Through Innovative Design, Intelligent Construction, and Secondary Utilization - Motalebi Arash, Khondoker Mohammad, Kabir Golam (2023-08)
A Systematic Review of Life Cycle Assessments of 3D Concrete Printing - Armstrong Kristina, Kamath Dipti, Zhao Xianhui, Rencheck Mitchell et al. (2023-07)
Life Cycle Cost, Energy, and Carbon Emissions of Molds for Pre-Cast Concrete:
Exploring the Impacts of Material-Choices and Additive Manufacturing - Jones Kathryn, Li Mo (2023-06)
Life Cycle Assessment of Ultra-Tall Wind Turbine Towers Comparing Concrete Additive Manufacturing to Conventional Manufacturing - Kokare Samruddha, Oliveira João, Godina Radu (2023-05)
Life Cycle Assessment of Additive Manufacturing Processes:
A Review - Fernandez Letízia, Caldas Lucas, Mendoza Reales Oscar (2023-05)
Environmental Evaluation of 3D Printed Concrete Walls Considering the Life Cycle Perspective in the Context of Social Housing - Zhang Ruo-Chen, Wang Li, Xue Xuan, Ma Guowei (2023-02)
Environmental Profile of 3D Concrete Printing Technology in Desert Areas via Life Cycle Assessment - Sambucci Matteo, Biblioteca Ilario, Valente Marco (2023-01)
Life Cycle Assessment (LCA) of 3D Concrete Printing and Casting Processes for Cementitious Materials Incorporating Ground Waste Tire Rubber - Khalili Tari Mohammadreza, Reza Faraji Amir, Aslani Alireza, Zahedi Rahim (2023-01)
Energy Simulation and Life Cycle Assessment of a 3D Printable Building - Roux Charlotte, Kuzmenko Kateryna, Roussel Nicolas, Mesnil Romain et al. (2022-11)
Life Cycle Assessment of a Concrete 3D Printing Process - Mir Namra, Khan Shoukat, Kul Anil, Şahin Oğuzhan et al. (2022-08)
Life Cycle Assessment of Construction and Demolition Waste-Based Geopolymers Suited for Use in 3D Additive Manufacturing - Ebrahimi Mahdi, Mohseni Mohammad, Aslani Alireza, Zahedi Rahim (2022-08)
Investigation of Thermal Performance and Life Cycle Assessment of a 3D Printed Building - Yoris-Nobile Adrian, Lizasoain-Arteaga Esther, Slebi-Acevedo Carlos, Blanco-Fernandez Elena et al. (2022-07)
Life-Cycle-Assessment and Multi-Criteria Decision-Making-Analysis to Determine the Performance of 3D Printed Cement Mortars and Geopolymers - Gislason Styrmir, Bruhn Simon, Breseghello Luca, Sen Burak et al. (2022-06)
Porous 3D Printed Concrete Beams Show an Environmental Promise:
A Cradle-to-Grave Comparative Life Cycle Assessment - Ennab Lena, Dixit Manish, Birgisson Bjorn, Kumar Pranav (2022-04)
Comparative Life Cycle Assessment of Large-Scale 3D Printing Utilizing Kaolinite-Based Calcium-Sulfoaluminate-Cement Concrete and Conventional Construction - Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
A Systematic Literature Review - Muñoz Ivan, Madrid Javier, Muñiz Manuel, Uhart Maylis et al. (2021-01)
Life Cycle Assessment of Integrated Additive-Subtractive Concrete 3D Printing - Mohammad Malek, Masad Eyad, Ghamdi Sami (2020-12)
3D Concrete Printing Sustainability:
A Comparative Life Cycle Assessment of Four Construction Method Scenarios - Yao Yue, Hu Mingming, Maio Francesco, Cucurachi Stefano (2019-08)
Life Cycle Assessment of 3D Printing Geopolymer Concrete:
An Ex‐Ante Study