Skip to content

#parameter

Keywords by Co - Occurrence

  1. Sahai Rajan, Bisht Ravindra, Malik Lavanya, Rahman Mohamed et al. (2026-01)
    Strength Evaluation of 3D Concrete Printed Layers Using in-Situ Parameters Monitoring
  2. Eisazadeh Hamid, Chatroudi Narges, Alizadeh Roozbeh (2025-12)
    AI-Based Prediction and Numerical Analysis of Mechanical and Microstructural Parameters of Carbon Fiber Reinforced 3D Printed Composites
  3. Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
    Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
    A Systematic Review
  4. Jacobi Ando, Zöllner Jan-Phillip, Hack Norman, Mai (née Dressler) Inka (2025-12)
    Encasement of Pre-Placed Reinforcement in Injection 3D Concrete Printing:
    The Effect of Rheology and Process Parameters
  5. Álvarez Luisa, Fernandez Brian, Saldarriaga Federico, Romero Héctor et al. (2025-11)
    Development and Bioclimatic Evaluation of Parametrically Designed Geometries for 3D-Printed Concrete Walls
  6. Sičáková Alena, Verčimák Dominik (2025-11)
    Lightweight Mixtures with a High Proportion of Recycled Fillers in Terms of 3D Printing Parameters
  7. Baah Thomas, Kim Heejeong, Latypov Marat (2025-11)
    Multi-Objective Adaptive Experimental Approach for Optimizing 3D Concrete Printing Mixtures and Parameters Incorporating Construction and Demolition Waste for Sustainable Construction
  8. Abidi Imene, Tuna Meral, Carboni Biagio, Trovalusci Patrizia (2025-11)
    A Parametric Study on Topology Optimization of Additively Manufactured Clay Materials
  9. Flor Juncal Luis, Scott Allan, Clucas Don, Loporcaro Giuseppe (2025-11)
    Influence of Alternative Supplementary Cementitious Materials and Printing Parameters on the Mechanical Properties of 3D-Printed Mortars
  10. Kul Anil, Kocaer Öznur (2025-10)
    Parametric Analysis of Design and Operational Parameters in 3D Concrete Printing of Wall Elements
  11. Shang Yuqing, Yu Zheming, Ma Wei, Wei Jun et al. (2025-10)
    Research on 3D Printing Materials and Printing Parameters of Basalt Fiber Reinforced Concrete
  12. Thajeel Marwah, Chalawi Ameen, Balázs György (2025-09)
    Printability and Strength of 3D-Printed Concrete:
    Role of Mix Design and Printing Parameters
  13. Alonso-Cañon Sara, Alonso-Estebanez Alejandro, Yoris-Nobile Adrian, Brunčič Ana et al. (2025-08)
    Rheological Parameter Ranges for 3D Printing Sustainable Mortars Using a New Low-Cost Rotational Rheometer
  14. Mak Bunleang, Kim Tae, Dong Won-Jun, Shim Chang (2025-08)
    Crack Width Investigation of Reinforced Concrete Beam with 3D Concrete Printed Formwork Using Modified Parameters
  15. Kiyani Muhammad, Hussain Syed, Emaan Rajja, Kamal Muhammad et al. (2025-08)
    Influence of Process Parameters on 3D Concrete Printing:
    A Step Towards Standardized Approaches
  16. Liu Zhixin, Si Liang, Liu Yebao, Li Mingyang et al. (2025-08)
    Optimization of Printing Parameters Based on Computational Fluid Dynamics for Uniform Filament Mass Distribution at Corners in 3D Cementitious Material Printing
  17. Bradshaw James, Si Wen, Khan Mehran, McNally Ciaran (2025-07)
    Emerging Insights into the Durability of 3D-Printed Concrete:
    Recent Advances in Mix Design Parameters and Testing
  18. Rizzieri Giacomo, Meni Simone, Cremonesi Massimiliano, Ferrara Liberato (2025-07)
    A Particle Finite Element Method for Investigating the Influence of Material and Process Parameters in 3D Concrete Printing
  19. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
    Significance of Nozzle Parameters for 3D Printing of Concrete
  20. Si Wen, Khan Mehran, McNally Ciaran (2025-06)
    A Comprehensive Review of Rheological Dynamics and Process Parameters in 3D Concrete Printing
  21. Mukhtar Faisal (2025-05)
    3D-Printed Concrete Fracture:
    Effects of Cohesive Laws, Mixes, and Print Parameters in 3D EXtended FEM
  22. Bettermann Luca, Slepicka Martin, Esser Sebastian, Borrmann André (2025-05)
    Data-Driven Parameter Calibration in Additive Manufacturing for Construction:
    An Introduction to Learning by Printing
  23. An Dong, Rahman Mahfuzur, Zhang Y., Yang Chunhui (2025-05)
    Effects of Key 3D Concrete Printing Process Parameters on Layer Shape:
    Experimental Study and Smooth Particle Hydrodynamics Modelling
  24. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
    Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods
  25. Yang Kun, Yuan Jingbo, Wang Yibo, Yang Fan et al. (2025-03)
    Optimization of 3D Printing Nozzle Structure and the Influence of Process Parameters on the Forming Performance of Underwater Concrete
  26. Sangiorgio Valentino, Rossetti Pietro, Polidoro Anthony, Rossi Emilio (2025-02)
    Sustainable Raw-Earth Blocks Achieved with 3D-Printed Formworks:
    Parametric Modeling, Prototyping, and Laboratory Testing
  27. Avancini Victor, Quintana-Ruiz Osvaldo, Campello Eduardo (2024-12)
    Assessing 3D Printed Concrete Process Parameters Through Discrete Element Modeling
  28. Jin Willy, Caron Jean-François, Ouellet-Plamondon Claudiane (2024-11)
    Minimizing the Carbon Footprint of 3D Printing Concrete:
    Leveraging Parametric LCA and Neural Networks Through Multi-Objective-Optimization
  29. Wang Qingwei, Han Song, Yang Junhao, Li Ziang et al. (2024-11)
    Optimizing Printing and Rheological Parameters for 3D Printing with Cementitious Materials
  30. Jørgensen Henrik, Hansen Steen, Jespersen Esra, Florenzano Daniele et al. (2024-11)
    Experimental Investigation of Key Structural Parameters for Structural Design of 3D Printed Concrete
  31. He Yuxiang, Robens-Radermacher Annika, Noda Sakiko, Wolf Christoph et al. (2024-11)
    Automated Workflows for Concrete Additive Manufacturing for Design, Optimization, and Fabrication of Parametrized Elements
  32. Fasihi Ali, Libre Nicolas (2024-10)
    Interaction Between Material and Process-Parameters During 3D Concrete-Extrusion-Process
  33. Flor Juncal Luis, Loporcaro Giuseppe, Scott Allan, Clucas Don (2024-10)
    Influence of Printing-Parameters on the Durability of 3D Printed Limestone-Calcined-Clay-Cement Mortar:
    Overlap Between Filaments and Nozzle-Offset
  34. Harbouz Ilhame, Alam Syed, Loukili Ahmed (2024-09)
    Influence of Printing Parameters on Early-Age Shrinkage in 3D Printed Mortar
  35. Abstoß Marvin, Funke Henrik, Gelbrich Sandra (2024-09)
    Production of High-Precision Formwork Elements Using Parametrically Programmed Concrete-Extrusion and Machining
  36. Nakase Kota, Hashimoto Katsufumi, Sugiyama Kentaro, Mori Hiroaki et al. (2024-09)
    Effect of Printing Parameters on Print Quality and Fracture Propagation Behavior of 3D Printed Concrete
  37. Jeyifous Olubunmi, Schönsee Eric, Strangfeld Christoph, Hüsken Götz (2024-09)
    Correlation of Continuously Measured In-Line Process Parameters and Extruded Geometry in 3D Concrete Printing Experiments
  38. Qiu Minghong, Sun Yan, Qian Ye (2024-09)
    Impact of Groove-and-Tongue Parameters on the Bonding Behavior Between 3D Printed UHP-SHCC and Cast Normal Concrete
  39. Buschmann Birger, Henke Klaudius, Asshoff Carsten, Talke Daniel et al. (2024-08)
    Additive Manufacturing of Wood-Composite-Parts by Individual Layer Fabrication:
    Influence of Process Parameters on Product Properties
  40. Souza Dias Leonardo, Anjos Marcos, Barbosa Marcella, Bezerra Ulisses (2024-07)
    Evaluation of Mix-Design Parameters Based on Basic Constitutive-Relationships for 3DCP Printing
  41. Zhang Kaijian, Lin Wenqiang, Zhang Qingtian, Wang Dehui et al. (2024-07)
    Evaluation of Anisotropy and Statistical Parameters of Compressive Strength for 3D Printed Concrete
  42. Sovetova Meruyert, Calautit John (2024-07)
    Influence of Printing Parameters on the Thermal Properties of 3D Printed Construction Structures
  43. Duan Jiaqi, Sun Shouzheng, Chi Shengfeng, Hu Chunyou et al. (2024-06)
    Effect of Process Parameters on Forming Quality and Flexural Strength of Continuous-Fiber-Reinforced Cement-Based 3D Printed Composites
  44. Duarte Gonçalo, Duarte José, Brown Nathan, Memari Ali et al. (2024-06)
    Design for Early-Age Structural Performance of 3D Printed Concrete Structures:
    A Parametric Numerical Modeling Approach
  45. Yousaf Arslan, Rashid Ans, Koç Muammer (2024-05)
    Parameter-Tuning for Sustainable 3D Printing of Clay Structures
  46. Salari Farid, Zocca Andrea, Bosetti Paolo, Hlaváček Petr et al. (2024-05)
    Powder-Bed 3D Printing by Selective Activation of Magnesium-Phosphate-Cement:
    Determining Significant Processing Parameters and Their Effect on Mechanical Strength
  47. Wei Ying, Han Song, Yu Shiwei, Chen Ziwei et al. (2024-05)
    Parameter Impact on 3D Concrete Printing from Single to Multi-Layer Stacking
  48. İlcan Hüseyin, Özkılıç Hamza, Tuğluca Merve, Şahmaran Mustafa (2024-02)
    Inter-Layer Mechanical Performance of 3D Printed Cementitious Systems:
    A Comprehensive Study on Operational and Material Parameters
  49. Ahi Oğulcan, Ertunç Özgür, Bundur Zeynep, Bebek Özkan (2024-02)
    Automated Flow-Rate-Control of Extrusion for 3D Concrete Printing Incorporating Rheological Parameters
  50. Liu Xiongfei, Cai Huachong, Ma Guowei, Hou Guanyu (2024-01)
    Spray-Based 3D Concrete Printing-Parameter Design-Model:
    Actionable Insight for High Printing Quality
  51. Pal Biswajit, Chourasia Ajay, Kapoor Ashish (2024-01)
    Intricacies of Various Printing Parameters on Mechanical Behavior of Additively Constructed Concrete
  52. Dong Wei, Wang Junfeng, Hang Meiyan, Qu Shuqiang (2024-01)
    Research on Printing Parameters and Salt-Frost-Resistance of 3D Printing Concrete with Ferrochrome-Slag and Aeolian Sand
  53. Acuña Tomás, Avendaño Martín, García-Alvarado Rodrigo, Banda Pablo et al. (2023-12)
    Parametric Design of Multipurpose 3D Printed Walls Based on Roberto Matta´s Drawings
  54. Briels David, Renz Mauritz, Nouman Ahmad, Straßer Alexander et al. (2023-10)
    Monolithic AM Façade:
    Multi-Objective Parametric Design-Optimization of Additively Manufactured Insulating Wall Elements
  55. Özkılıç Hamza, İlcan Hüseyin, Aminipour Ehsan, Tuğluca Merve et al. (2023-08)
    Bond Properties and Anisotropy Performance of 3D Printed Construction and Demolition Waste-Based Geopolymers:
    Effect of Operational- and Material-Oriented Parameters
  56. Arrêteau Manon, Fabien Aurélie, Haddaji Badreddine, Chateigner Daniel et al. (2023-07)
    Review of Advances in 3D Printing Technology of Cementitious Materials:
    Key Printing Parameters and Properties Characterization
  57. Salaimanimagudam M., Jayaprakash Jaganathan (2023-06)
    Effect of Printing Parameters on Inter-Filament Voids, Bonding, and Geometrical Deviation in Concrete 3D Printed Structures
  58. Vespalec Arnošt, Podroužek Jan, Koutný Daniel (2023-04)
    DoE Approach to Setting Input Parameters for Digital 3D Printing of Concrete for Coarse Aggregates up to 8 mm
  59. Paul Suvash, Basit Md, Hasan Noor, Dey Dhrutiman et al. (2023-04)
    3D Printing of Geopolymer Mortar:
    Overview of the Effect of Mix-Design and Printing Parameters on the Strength
  60. Uddin Md, Mahamoudou Faharidine, Deng Boyu, Elobaid Musa Moneef et al. (2023-03)
    Prediction of Rheological Parameters of 3D Printed Polypropylene-Fiber-Reinforced Concrete by Machine Learning
  61. Quah Tan, Tay Yi, Lim Jian, Tan Ming et al. (2023-03)
    Concrete 3D Printing:
    Process-Parameters for Process-Control, Monitoring and Diagnosis in Automation and Construction
  62. Talke Daniel, Saile Bettina, Meier Niklas, Herding Friedrich et al. (2023-03)
    Particle-Bed 3D Printing by Selective Cement-Activation:
    Influence of Process Parameters on Particle-Bed Density
  63. Khan Shoukat, Koç Muammer (2023-03)
    Buildability-Analysis of 3D Concrete Printing Process:
    A Parametric Study Using Design of Experiment-Approach
  64. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-02)
    Parametric Modelling of 3D Printed Concrete Segmented Beams with Rebars Under Bending Moments
  65. Zhang Nan, Sanjayan Jay (2023-01)
    Extrusion Nozzle Design and Print Parameter Selections for 3D Concrete Printing
  66. Joon Hillar, Hass Lauri, Peetrimägi Lauri (2023-01)
    Influence of Limestone-Filler on Technological Parameters of Mixtures for 3D Concrete Printing
  67. Li Zihan, Liu Huanbao, Cheng Xiang, Nie Ping et al. (2022-12)
    Improvement of 3D Printing Cement-Based Material-Process:
    Parameter Experiment and Analysis
  68. Liu Zhixin, Li Mingyang, Wong Teck (2022-11)
    Investigations of Nozzle-Configuration and Process Parameters on Porosity Formation of the 3D Printed Structure
  69. Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping et al. (2022-11)
    Flow and Deformation Behaviors of Cementitious Materials Through Nozzles with Different Geometric Parameters:
    Experimental and Numerical Approaches
  70. Li Shuai, Nguyen-Xuan Hung, Tran Jonathan (2022-11)
    Digital Design and Parametric Study of 3D Concrete Printing on Non-Planar Surfaces
  71. Lachmayer Lukas, Böhler David, Freund Niklas, Mai (née Dressler) Inka et al. (2022-11)
    Modelling the Influence of Material and Process Parameters on Shotcrete 3D Printed Strands:
    Cross-Section Adjustment for Automatic Robotic Manufacturing
  72. Patterson Albert, Vajipeyajula Bhaskar, Norris William (2022-10)
    System Architecture and Design Parameters for Extrusion-Based Autonomous Construction Systems
  73. Lamnini Soukaina, Elsayed Hamada, Lakhdar Yazid, Baino Francesco et al. (2022-09)
    Robocasting of Advanced Ceramics:
    Ink-Optimization and Protocol to Predict the Printing Parameters
  74. Farahbakhsh Mehdi, Rybkowski Zofia, Zakira Umme, Kalantar Negar et al. (2022-07)
    Impact of Robotic 3D Printing Process Parameters on Inter-Layer Bond Strength
  75. Ribeiro João, Figueiredo Bruno, Cruz Paulo, Camões Aires (2022-07)
    Concrete AM:
    An Insight into the Control of Main Parameters
  76. Böhler David, Mai (née Dressler) Inka, Freund Niklas, Lachmayer Lukas et al. (2022-06)
    Influence of Material and Process Parameters on Hardened State Properties of Shotcrete 3D Printed Elements
  77. Xu Nuoyan, Qian Ye, Yu Jing, Leung Christopher (2022-05)
    Tensile Performance of 3D Printed Strain-Hardening Cementitious Composites Considering Material-Parameters, Nozzle-Size and Printing-Pattern
  78. Elistratkin Michail, Alfimova Nataliya, Podgorniy Daniil, Olisov Andrey et al. (2022-05)
    Influence of Equipment Operation Parameters on the Characteristics of a Track Produced with Construction 3D Printing
  79. Biricik Öznur, Mardani Ali (2022-05)
    Parameters Affecting Thixotropic Behavior of Self-Compacting Concrete and 3D Printable Concrete:
    A State of the Art Review
  80. Zhou Wen, Zhang Yamei, Ma Lei, Li Victor (2022-04)
    Influence of Printing Parameters on 3D Printing Engineered Cementitious Composites
  81. Huang Xin, Yang Weihao, Song Fangnian, Zou Jiuqun (2022-04)
    Study on the Mechanical Properties of 3D Printing Concrete Layers and the Mechanism of Influence of Printing Parameters
  82. Tay Yi, Lim Jian, Li Mingyang, Tan Ming (2022-03)
    Creating Functionally Graded Concrete Materials with Varying 3D Printing Parameters
  83. Ji Guangchao, Xiao Jianzhuang, Zhi Peng, Wu Yuching et al. (2022-02)
    Effects of Extrusion-Parameters on Properties of 3D Printing Concrete with Coarse Aggregates
  84. Şahin Hatice, Mardani Ali (2021-12)
    Assessment of Materials, Design Parameters and Some Properties of 3D Printing Concrete Mixtures:
    A State of the Art Review
  85. Zhang Hongping, Wang Jianhong, Liu Yaling, Zhang Xiaoshuang et al. (2021-11)
    Effect of Processing Parameters on the Printing Quality of 3D Printed Composite Cement-Based Materials
  86. Munir Qaisar, Peltonen Riku, Kärki Timo (2021-08)
    Printing Parameter Requirements for 3D Printable Geopolymer Materials Prepared from Industrial Side Streams
  87. Schmidt Albrecht, Mengesha Meron, Göbel Luise, Könke Carsten et al. (2021-05)
    Numerical Modeling of an Extrusion-Based Concrete Printing Process Considering Spatially and Temporarily Varying Material and Process Parameters
  88. Lu Bing, Li Mingyang, Wong Teck, Qian Shunzhi (2021-02)
    Effect of Printing Parameters on Material-Distribution in Spray-Based 3D Concrete Printing (S-3DCP)
  89. Rubin Ariane, Hasse Jéssica, Repette Wellington (2021-01)
    The Evaluation of Rheological Parameters of 3D Printable Concretes and the Effect of Accelerating-Admixture
  90. Ooms Ticho, Vantyghem Gieljan, Coile Ruben, Corte Wouter (2020-12)
    A Parametric Modelling-Strategy for the Numerical Simulation of 3D Concrete Printing with Complex Geometries
  91. Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2020-09)
    3D Printed Concrete for Large-Scale Buildings:
    An Overview of Rheology, Printing Parameters, Chemical Admixtures, Reinforcements, and Economic and Environmental Prospects
  92. Chen Yu, Jansen Koen, Zhang Hongzhi, Rodríguez Claudia et al. (2020-07)
    Effect of Printing-Parameters on Inter-Layer Bond Strength of 3D Printed Limestone-Calcined-Clay-Based Cementitious Materials:
    An Experimental and Numerical Study
  93. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-07)
    Control of Strand Properties Produced with Shotcrete 3D Printing by Accelerator Dosage and Process Parameters
  94. Comminal Raphaël, Silva Wilson, Andersen Thomas, Stang Henrik et al. (2020-07)
    Influence of Processing Parameters on the Layer Geometry in 3D Concrete Printing:
    Experiments and Modelling
  95. Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
    Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing
  96. Liu Zhixin, Li Mingyang, Weng Yiwei, Qian Ye et al. (2020-03)
    Modelling- and Parameter-Optimization for Filament-Deformation in 3D Cementitious Material-Printing Using Support-Vector-Machine
  97. Chen Mingxu, Liu Bo, Li Laibo, Cao Lidong et al. (2020-01)
    Rheological Parameters, Thixotropy and Creep of 3D Printed Calcium-Sulfoaluminate-Cement Composites Modified by Bentonite
  98. Suntharalingam Thadshajini, Nagaratnam Brabha, Poologanathan Keerthan, Hackney Phil et al. (2019-12)
    Effect of Polypropylene-Fibers on the Workability Parameters of Extrudable Cementitious Materials
  99. Kruger Jacques, Cho Seung, Zeranka Stephan, Vintila Cristian et al. (2019-12)
    3D Concrete Printer Parameter Optimization for High-Rate Digital Construction Avoiding Plastic Collapse
  100. Kontovourkis Odysseas, Tryfonos George (2019-11)
    Robotic 3D Clay Printing of Prefabricated Non-Conventional Wall Components Based on a Parametric-Integrated Design
  101. Chen Mingxu, Li Laibo, Wang Jiaao, Huang Yongbo et al. (2019-10)
    Rheological Parameters and Building Time of 3D Printing Sulphoaluminate-Cement-Paste Modified by Retarder and Diatomite
  102. Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
    The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete
  103. Tay Yi, Li Mingyang, Tan Ming (2019-04)
    Effect of Printing Parameters in 3D Concrete Printing:
    Printing Region and Support Structures
  104. Wolfs Robert, Bos Freek, Salet Theo (2019-03)
    Hardened Properties of 3D Printed Concrete:
    The Influence of Process Parameters on Inter-Layer Adhesion
  105. Kaszyńska Maria, Olczyk Norbert, Techman Mateusz, Skibicki Szymon et al. (2019-02)
    Thermal-Humidity Parameters of 3D Printed Wall
  106. Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2019-01)
    Direct-Shear-Test for the Assessment of Rheological Parameters of Concrete for 3D Printing Applications
  107. Papachristoforou Michail, Mitsopoulos Vasilios, Stefanidou Maria (2018-10)
    Evaluation of Workability Parameters in 3D Printing Concrete
  108. Putten Jolien, Schutter Geert, Tittelboom Kim (2018-09)
    The Effect of Print Parameters on the (Micro)structure of 3D Printed Cementitious Materials
  109. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
    Effect of Spray-Based Printing Parameters on Cementitious Material-Distribution
  110. Lu Bing, Li Mingyang, Lao Wenxin, Weng Yiwei et al. (2018-08)
    Experimental Investigation of Printing Parameters on Material-Distribution in 3D Spray Cementitious Material Printing Process
  111. Scotto Fabio, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias et al. (2018-05)
    Adaptive Control-System for Smart Dynamic Casting:
    Defining Fabrication-Informed Design-Tools and Process-Parameters in Digital Fabrication-Processes
  112. Kontovourkis Odysseas, Tryfonos George (2017-07)
    Integrating Parametric Design with Robotic Additive Manufacturing for 3D Clay Printing:
    An Experimental Study
  113. Fischer Thomas, Herr Christiane (2016-04)
    Parametric Customisation of a 3D Concrete Printed Pavilion