#evaluation¶

Keywords by Co - Occurrence¶

#print (123) #concrete (100) #performance (35) #printability (31) #base (29)

1. Chen Zhengyuan, Yang Shutong, Lan Tian, Yang Tiange (2026-04)
   Evaluation of Interfacial Fracture Resistance and Fracture Anisotropy in 3D-Printed Ultra-High-Performance Concrete:
   Analytical Modelling and Experimental Investigation
2. Janghorban Emad, Joshi Arpan, Gaspar Florindo (2026-04)
   Evaluating the Effect of Glass and Carbon Fiber Mesh on 3D-Printed Concrete Performance
3. Nayak Anitha, Nayaka Ramesh, Zhang Y. (2026-04)
   Performance Evaluation, Microstructure Behaviour and Life Cycle Assessment of 3D Concrete Printable Ink Containing Recycled Construction Waste
4. Cadenazzi Thomas, Liu Kaimiao, Keles Busra (2026-04)
   Performance Evaluation of Novel 3D Printed Hemp-PLA Composites for Sustainable Concrete Reinforcement
5. Zhu Chao, Li Hairuo, Liu Chao, Zhao Nan et al. (2026-03)
   Freeze-Thaw Resistance of 3D Printed Concrete:
   Comprehensive Evaluation of Material Properties and Printing Parameters
6. Uehara Shoma, Ohshiro Yusei, Shima Kanako, Sakamoto Kazuya et al. (2026-03)
   Evaluation of Static Yield Stress and Buildability of PVA Fiber-Reinforced Mortars for 3D Printing Using a Vane Shear Test
7. Kim J.-S., Yoo C., Yang Y. (2026-03)
   Microstructural Characterization and Bonding Performance Evaluation of 3D-Printed Concrete-Mortar Composites
8. Gomez Enrique, Varela Hugo, Barluenga Gonzalo (2026-03)
   Evaluation of Cone-Penetration Test as a Rheology Quality-Control Field-Oriented Test for 3D Printing Cement-Based Systems
9. Li Haiyan, Luo Aizhong, Zhang Xiaozhong, Ma XiaoMeng et al. (2026-03)
   Optimization of One-Part Alkali-Activated Concrete for Extrusion-Based 3D Printing Through Integrated Performance Evaluation
10. Ashok Tanshette Akash, Faisal Zoheb, Huang Jianxin, Puppala Anand (2026-03)
    Durability Evaluation of Soil-Geopolymer Based Composites for 3D Printing Applications in Geotechnical Engineering
11. Liu Huawei, Dai Meiling, Liu Chao, Du Hongjian (2026-02)
    Targeted Enhancement Strategy for the Rebar Interface Bond in 3D Printed Coarse Aggregate Concrete: Performance Evaluation and Mechanistic Insights
12. Mirmotalebi Seyedali, Moon Hyosoo, Tesiero Raymond, Noor Sadia (2026-02)
    Comparative Evaluation of Voxel and Mesh Representations for Digital Defect Detection in Construction-Scale Additive Manufacturing.
13. Tafur Ginette, Rivera Cristhofer, Torres Pablo (2026-02)
    Evaluation of Sustainable 3D Concrete with Partial Replacement of Fine Aggregate by PET and Addition of Coconut Fibers:
    Impact on Construction with the Use of 3D Gantry-Type Printers in Peru
14. Patel Aniket, Santhanam Manu (2026-01)
    Rheological and Fresh-State Characterization for 3D-Printable Concrete:
    Evaluating Printability Across Different Binder Systems
15. Teixeira João, Jesus Manuel, Rangel Bárbara, Alves Jorge et al. (2026-01)
    Evaluation of Printing Performance of Cementitious Pastes with Alternative Powders
16. Singh Amardeep, Sun Jingting, Qi Deng, Abden Md et al. (2026-01)
    Evaluating Glass Powder Substitution for 3D Printed Concrete:
    Effects on Thermal Properties and Embodied Carbon
17. Cunha Jaime, Rangel Bárbara, Vilas-Boas Rodrigo (2026-01)
    Evaluating the Environmental Efficiency of on-Site and Off-Site 3D Construction Printing:
    A Roadmap Towards Sustainable Building Practices
18. Lara Yamile, Gianoli Pablo, Gonzalez Elizabeth, Abreu Ana (2026-01)
    Evaluation of Additively Manufactured Acoustic Absorbing Metamaterials
19. Sahai Rajan, Bisht Ravindra, Malik Lavanya, Rahman Mohamed et al. (2026-01)
    Strength Evaluation of 3D Concrete Printed Layers Using in-Situ Parameters Monitoring
20. Mohammed Salhah, Aljewifi Hana, Jldain Hafeth (2025-12)
    Evaluating Compressive Strength in 3D-Printed Concrete Structures:
    A Comparative Study of ANSYS Simulations and Experimental Data
21. Fatima Warsi, Syed Bustan, Panda Biranchi, Biswas Pankaj (2025-12)
    Numerical Evaluation of the Seismic Performance of Self-Centering 3D Printed Concrete Wall
22. Sando Mona, Alves Santos Sara, Worms Paul, Gurlo Aleksander et al. (2025-12)
    Evaluation of Continuous Epoxy-Impregnated Carbon Fiber Reinforcement in a 3D-Printable Geopolymer Composite
23. Álvarez Luisa, Fernandez Brian, Saldarriaga Federico, Romero Héctor et al. (2025-11)
    Development and Bioclimatic Evaluation of Parametrically Designed Geometries for 3D-Printed Concrete Walls
24. Biswas Rajib, Saito Takahiro, Ito Atsushi (2025-11)
    Experimental Evaluation of a Novel 3D-Printed Permanent Concrete Formwork
25. Raza Ali, Tan Binglin, Jiajia Zhou, Umar Muhammad et al. (2025-11)
    Evaluation of Mechanical and Microstructural Properties of Sustainable 3D-Printed Engineered Cementitious Composites Incorporating Hybrid PE/PVA Fibers and Yellow River Sand
26. Sun Yan, Du Guoqiang, Mudasir Maryam (2025-11)
    Rheological Investigations of Fresh Fiber-Reinforced Cementitious Composites Using Hydrophobic / Hydrophilic UHMWPE Fibers for 3D Concrete Printing Evaluation
27. Givkashi Mohammad (2025-11)
    Durability of 3D Printed Concrete Containing Air-Entraining Agent:
    Evaluating the Importance of Carbonation Resistance
28. Fahmy Mohamed, Zainaddin Aqeel, Allo Raafat (2025-11)
    Evaluating the Impact of Different Variables on the Aesthetic Appearance and Structural Integrity of 3D Concrete Printed Panels
29. Pandum Jeero, Hashimoto Katsufumi, Sugiyama Takafumi, Nakase Kota (2025-11)
    AI-Driven Evaluation of 3D-Printed Concrete:
    Analyzing Printed Patterns Using Impact-Echo and Acoustic Emission
30. Sakolaree Natthanicha, Taweesint Jutamas, Sungsiri Krisana, Assawamankongcharoen Sirikamol et al. (2025-11)
    Evaluation of Fresh and Mechanical Properties and Shrinkage of Hydrophobic Mortar Containing Microfiber for 3D Printing Technology
31. Hasani Alireza, Dorafshan Sattar (2025-11)
    Evaluation of Fresh, Hardened, and Durability Properties of Three-Dimensional Concrete Printed Pipes
32. Wang Hailong, Song Xinlei, Shen Wenbin, Sun Xiaoyan et al. (2025-10)
    Evaluation and Optimization of 3D-Printed Concrete Based on Flowability Considering Printability and Micro-Pore Characteristics
33. Bradshaw James, Balasubramanian Swathi, Si Wen, Khan Mehran et al. (2025-10)
    Towards Greener 3D Printing:
    A Performance Evaluation of Silica Fume-Modified Low-Carbon Concrete
34. Tanaka Shunsei, Yoshida Kohei, Yamamoto Yujin, Kinomura Koji (2025-10)
    Numerical Evaluation on Buildability of 3D Printing Mortar Based on Time-Dependent Material Model
35. Wang Yufei, Sun Junbo, Wang Xiangyu, Huang Bo et al. (2025-09)
    Environmental and Economic Evaluation of a Prefabricated 3D-Printed Structural Units Using Recycled Aggregates from Construction and Demolition Waste:
    A Case Study in China
36. Leong Wai (2025-09)
    Structural Optimization and Performance Evaluation of Spain's 3D-Printed Concrete Bridges Using AI-Based Design Approaches
37. Chortis Alexandros, Gkountas Charalampos, Melidis Lazaros, Katakalos Konstantinos (2025-09)
    Seismic Performance Evaluation of 3D-Printed Concrete Walls Through Numerical Methods
38. Boddepalli Uday, Kandagaddala Revanth, Nanthagopalan Prakash (2025-08)
    Evaluation of Alkali-Activated Limestone Calcined Clay Mortars for 3D Concrete Printing Applications
39. Mani Aravindhraj, Sekar Muthu (2025-08)
    NDT Techniques for Evaluating Mechanical Properties in Green and Fiber-Reinforced 3D Printable Mixes
40. Miri Zahra, Aurilio R., Polak Maria, Baaj Hassan (2025-08)
    Interface Bonding in 3D-Printed Concrete:
    Experimental Evaluation and Numerical Modeling
41. Dong Liang, Wu Chengqing, Liu Zhongxian, Wu Pengtao et al. (2025-07)
    Chloride Transport Anisotropy and Interfacial Degradation in 3D-Printed Ultra-High-Performance Concrete:
    Multi-Scale Evaluation and Engineering Implications
42. Shiotani Tomoki, Asaue Hisafumi, Ogura Hiroki, Okude Nobuhiro et al. (2025-07)
    Evaluation of Permanent 3D Printed Formwork of a Bridge Pier Using Non-Destructive Testing Methods
43. Alnemrawi Bara'a, Rousan Rajai, Abdalla Khairedin, Lagaros Nikos (2025-06)
    Evaluating the Structural Performance of 3D Printed FRCC Beams with Anchoring Reinforcement:
    Material, Geometry, and Loading Perspectives
44. Kontovourkis Odysseas, Georgiou Christos, Andreou Alexis, Andreou Vasilis et al. (2025-06)
    Measuring and Evaluating Layer Height to Width Ratio in 3DCP Towards Higher Geometric Conformity
45. Radl Elisabeth, Pfleger Marc-Patrick, Sieh Alexander, Vill Markus (2025-06)
    Conceptual Design and Production of a 3D Printed Concrete Base Brick with Evaluation of Its Thermal Properties
46. Mahdy Deena, Dara Seni, Abdelrahim Marwa (2025-06)
    Evaluating Structure Stability of Self-Supporting 3D Printed Earth-Based Cantilevers Using Robotic ARM
47. Hiremath Shivashankarayya, Mathapati Gururaj, Chiniwar Dundesh, Vishwanatha H. (2025-05)
    Performance Evaluation of Cementitious Composites by Designing an Extrusion System for Construction 3D Printing
48. Salifu N., Bassuoni Mohamed, Guven Gursans (2025-05)
    Performance Evaluation of Limestone-Blended Cement and Cellulose Nanomaterials in 3D Concrete Printing
49. Yang Shutong, Chen Zhengyuan, Lan Tian, Yang Tiange (2025-05)
    Quantitative Evaluation for Fracture Properties of 3D Printed Ultra-High-Performance Concrete Loaded in Different Directions
50. Hashimoto Katsufumi, Nakase Kota, Yoshihara Rei, Honda Yoshiki et al. (2025-04)
    Evaluation and Investigation of Material and Mechanical Property of 3D Printed Concrete by Means of Non-Destructive Testing Methods
51. Zuo Zibo, Tao Yaxin, Huang Yulin, Zhang Longlong et al. (2025-04)
    Real-Time Temperature Monitoring to Evaluate the Strength Evolution of 3D Printed Concrete:
    From Lab to In-Situ Printing
52. Ur Rehman Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-03)
    Systematic Literature Review of the Evaluation of the Thermal Conductivity of 3D Concrete Printed Building Elements
53. Suphunsaeng Kantawich, Prasittisopin Lapyote, Pethrung Sirichai, Pansuk Withit (2025-03)
    Fire Performance Evaluation of 3D-Printed Concrete Walls:
    A Combined Full-Scale and Numerical Modeling Approach
54. Abudawaba Fareh, Gomaa Eslam, Gheni Ahmed, Feys Dimitri et al. (2025-03)
    Evaluation of Fresh Properties of High Calcium Content Fly Ash-Based Alkali-Activated 3D-Printed Mortar
55. Mengistu Girum, Nemes Rita (2025-02)
    Evaluating the Performance of Recycled Aggregate Concrete Incorporating 3D-Printed Concrete Waste as Aggregate Using the Rebound Hammer Test
56. Liu Xiongfei, Li Chuang, Guo Pei, Wang Li et al. (2025-02)
    Spray-Based 3D Printed Tunnel Slag Concrete:
    Evaluation for Printability and Mechanical Performance
57. Tarek Shaimaa, Mansour Yasser, Abdelmohsen Sherif, Kohail Mohamed et al. (2025-02)
    Evaluating the Role of Additive Manufacturing in Adobe Brick Enhancement:
    A Comparative Study
58. Zhong Jianjun, Lyu Libo, Deng Yongjie, Ma Haiyan et al. (2025-01)
    An Evaluation-Method for the Printability of Magnesium-Phosphate-Cement Concrete for Integrated Mixing-Stirring-Extrusion Rapid 3D Printing
59. Ahn Eunjong, Han Seongho, Shin Myoungsu, Khayat Kamal et al. (2025-01)
    Novel Method to Evaluate 3D Printed Concrete Quality Using Ultrasonic Scatter-Energy-Techniques
60. Aminpour Nima, Memari Ali (2024-12)
    Analysis of Anisotropic Behavior in 3D Concrete Printing for Mechanical Property Evaluation
61. Latha P., Shanmugavelu V., Tamilmani A., Thayalnayaki D. et al. (2024-12)
    Evaluating 3D Concrete Printing Effectiveness Through a Comparative Study Using SVM, Decision Trees, and Random Forest Techniques
62. Maroszek Marcin, Rudziewicz Magdalena, Hutyra Adam, Dziura Paweł et al. (2024-12)
    Evaluation of 3D Concrete Printing Extrusion-Efficiency
63. Márquez Álvaro, Varela Hugo, Barluenga Gonzalo (2024-12)
    Rheology and Early-Age Evaluation of 3D Printable Cement-Limestone-Filler-Pastes with Nano-Clays and Methylcellulose
64. Venugopal Reddy P., Nakkeeran G., Roy Dipankar, Alaneme George (2024-11)
    Evaluating the Use of Recycled Fine Aggregates in 3D Printing:
    A Systematic Review
65. Bartaky Markus, Gosch Lukas, Stavric Milena (2024-11)
    Sustainable Temporary Housing:
    An Evaluation-Framework for Large-Scale 3D Printer for Adobe Construction in Challenging Environments
66. Soave Francesco, Muciaccia Giovanni, Ferrara Liberato (2024-11)
    An Indirect Methodology to Evaluate the Rheological Properties of a Digitally Fabricated Concrete Incorporating Corrosion Inhibitors
67. Bang Jin, Yim Hong (2024-10)
    Unbonded Inter-Layer Evaluation in Freshly 3D Printed Concrete Using Electrical Resistivity Measurements
68. Varela Hugo, Barluenga Gonzalo, Sonebi Mohammed (2024-09)
    Evaluation of Basalt-Fibers and Nano-Clays to Enhance Extrudability and Buildability of 3D Printing Mortars
69. Dey Dhrutiman, Panda Biranchi (2024-09)
    Numerical Evaluation of Thermal Performance and Improvement-Strategies for 3D Printed Concrete Structures
70. Gürel Şeyma, Wangler Timothy, Garger Moritz, Flatt Robert (2024-09)
    Residence-Time-Distribution Evaluation Method for In-Line Mixing Processes in Digital Concrete
71. Diggs-McGee Brandy, Kreiger Megan, Kreiger Eric, Negron-McFarlane Christian (2024-09)
    Case Study on the Use of Thermographic Analysis to Evaluate an Additively Constructed Building
72. Bang Jin, Yim Hong (2024-09)
    Non-Destructive Evaluation for the Unbonded Inter-Layer of 3D Printed Concrete
73. Zhang Hongping, Duan Shuni, Hu Zhichao, Liu Litao et al. (2024-09)
    Evaluation of Plasticity and Determination of Deformation Index of 3D Printed Composite Cement-Based Materials
74. Rennen Philipp, Gantner Stefan, Rothe Tom, Baz Bilal et al. (2024-08)
    Structural Evaluation of Shotcrete 3D Printing and Robotic Fiber Winding for Thin-Shell Elements
75. Yan Ruizhen, Meng Fangqi, Ke Guoju, Jia Kerui (2024-08)
    Comparative Evaluation of the Applicability of 3D Printing Mortar with Different Waste-Powders
76. Xiong Baocheng, Nie Ping, Liu Huanbao, Li Xiaoxi et al. (2024-08)
    Evaluation and Optimization of Micro-Calcium-Carbonate-Modified 3D Printed Rubber-Crumb Concrete
77. Sovetova Meruyert, Calautit John (2024-07)
    Design, Calibration and Performance Evaluation of a Small-Scale 3D Printer for Accelerating Research in Additive Manufacturing in Construction
78. Shahzad Qamar, Akbar Muhammad, Alzara Majed, Yosri Ahmed et al. (2024-07)
    Time-Dependent Buildability Evaluation of 3D Printed Concrete:
    Experimental Validation and Numerical Simulation
79. Souza Dias Leonardo, Anjos Marcos, Barbosa Marcella, Bezerra Ulisses (2024-07)
    Evaluation of Mix-Design Parameters Based on Basic Constitutive-Relationships for 3DCP Printing
80. Zhang Kaijian, Lin Wenqiang, Zhang Qingtian, Wang Dehui et al. (2024-07)
    Evaluation of Anisotropy and Statistical Parameters of Compressive Strength for 3D Printed Concrete
81. Quah Tan, Tay Yi, Tan Ming, Li King (2024-07)
    Evaluation of Extrusion-Methods for 3D Concrete Printing
82. Cui Weijiu, Sun Haijun, Zhou Jiangang, Wang Sheng et al. (2024-07)
    Geometric Quality Evaluation of Three-Dimensional Printable Concrete Using Computational Fluid Dynamics
83. Giwa Ilerioluwa, Dempsey Mary, Fiske Michael, Kazemian Ali (2024-06)
    3D Printed Sulfur-Regolith Concrete Performance Evaluation for Waterless Extraterrestrial Robotic Construction
84. Hasani Alireza, Dorafshan Sattar (2024-06)
    Transforming Construction?:
    Evaluation of the State of Structural 3D Concrete Printing in Research and Practice
85. To Quoc, Pham Koa, Lee Gayoon, Shin Myoungsu et al. (2024-06)
    Experimental and FEM Evaluation of the Influence of Inter-Layer Bonding Strength in 3D Printed Concrete Members Under Compressive and Flexural Loadings
86. Li Haodao, Wei Jingjie, Khayat Kamal (2024-06)
    3D Printing of Fiber-Reinforced Calcined Clay-Limestone-Based Cementitious Materials:
    From Mixture Design to Printability Evaluation
87. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2024-05)
    Evaluating Clay Characteristics for Printable Geo-Materials:
    A Case Study of Clay-Sand Mixes
88. Yoshihara Rei, Nakase Kota, Hashimoto Katsufumi, Sugiyama Takafumi et al. (2024-04)
    Evaluation of Aggregate-Distribution Heterogeneity in 3D Printed Concrete by Means of X-Ray CT
89. Negron-McFarlane Christian, Kreiger Eric, Barna Lynette, Stynoski Peter et al. (2024-04)
    Development of In-Place Test-Methods for Evaluating Printable Concretes
90. Chamatete Kunda, Yalçınkaya Çağlar (2024-03)
    Numerical Evaluation on Thermal Performance of 3D Printed Concrete Walls:
    The Effects of Lattice-Type, Filament-Width and Granular-Filling-Material
91. Jay Bhumika, Basavanagowda G., Kumari Archana, Chauhan Aishwarya et al. (2024-03)
    Application of Internet of Things (IoT) in Seismic Performance Evaluation of 3D Printed Structure
92. Chen Yidong, Zhang Yunsheng, Liu Zhiyong, Zhang Wenhua et al. (2024-03)
    Quantitative Surface Quality Evaluation for 3D Printed Concrete with Coarse Aggregate Through 3D Scanning
93. Soda Prabhath, Dwivedi Ashutosh, Sahana C., Gupta Souradeep (2024-03)
    Development of 3D Printable Stabilized Earth-Based Construction Materials Using Excavated Soil:
    Evaluation of Fresh and Hardened Properties
94. Chen Zhengyuan, Yang Shutong, Liu Qi, Xu Mingqi et al. (2024-03)
    Closed-Form Fracture-Model for Evaluating Crack-Resistance of 3D Printed Fiber-Reinforced Alkali-Activated Slag/Fly-Ash Recycled-Sand Concrete
95. Perales-Santillan M., Díaz-Aguilera Jorge, Mendoza-Rangel Jose (2024-02)
    Evaluation of the Rheological Behavior for Alkaline-Activated Cements of Metakaolin and Limestone for Its Potential Application in 3D Printing
96. Tao Yaxin, Zhang Yi, Wang Xiaoyun, Godinho Jose et al. (2024-01)
    Adhesion Evaluation and Interface Characterization of 3D Printed Concrete for Automatic Repair
97. Wang Qinghua, Xu Jinggang, Feng Duo, Li Wei et al. (2024-01)
    Properties and Printability Evaluation of Three-Dimensional Printing Magnesium-Oxychloride Cement by Fully Utilizing Aeolian-Sand
98. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-01)
    Experimental and Numerical Evaluation of Multi-Directional Compressive and Flexure Behavior of Three-Dimensional Printed Concrete
99. Westerlind Helena, Vargas José, Silfwerbrand Johan (2024-01)
    Towards the Application of Mesostructures in 3D Concrete Printing:
    Evaluating Load-bearing Performance
100. Felfili Guimarães Gabriela, Oliveira Marcos, Almeida Martinelli Juliana (2023-12)
     Performance-Evaluation of the 3D Printing System Through Fault-Tree-Analysis-Method
101. Carvalho Ivo, Melo Abcael, Melo Carlos, Brito Mateus et al. (2023-12)
     Evaluation of the Effect of Rubber-Waste-Particles on the Rheological and Mechanical Properties of Cementitious Materials for 3D Printing
102. Ambily Parukutty, Rajendran Neeraja, Kaliyavaradhan Senthil (2023-11)
     Mix-Design, Optimization and Performance-Evaluation of Extrusion-Based 3D Printable Concrete
103. Dams Barrie, Shepherd Paul, Ball Richard (2023-11)
     Development and Performance Evaluation of Fibrous Pseudoplastic Quaternary Cement Systems for Aerial Additive Manufacturing
104. Bui Van-Bien, Pham Thi, Pham Duc, Do Thi (2023-11)
     Accuracy Evaluation of Slump and Slump-Flow-Test for 3D Concrete Printing with the Kinect v1
105. Bhusal Shiva, Sedghi Reza, Hojati Maryam (2023-11)
     Evaluating the Printability and Rheological and Mechanical Properties of 3D Printed Earthen Mixes for Carbon-Neutral Buildings
106. Zou Mengtong, Liu Chuanbei, Zhang Keying, Li Wuqian et al. (2023-11)
     Evaluation and Control of Printability and Rheological Properties of 3D Printed Rubberized Concrete
107. Zafar Muhammad, Bakhshi Amir, Hojati Maryam (2023-10)
     Printability and Shape Fidelity Evaluation of Self-Reinforced Engineered Cementitious Composites
108. Khademi Pooria, Toufigh Vahab (2023-09)
     Data-Driven-Based Ultrasonics-Analysis for Evaluating the Bond-Strength of Concrete-Layers
109. Rehman Atta, Perrot Arnaud, Birru Bizu, Kim Jung-Hoon (2023-09)
     Recommendations for Quality-Control in Industrial 3D Concrete Printing Construction with Mono-Component Concrete:
     A Critical Evaluation of Ten Test-Methods and the Introduction of the Performance-Index
110. Kulkarni Omkar, Thakur Manideep, Kamakshi Tippabhotla, Paritala Spandana et al. (2023-09)
     Evaluation of Tensile Behavior of 3D Printed Concrete Assemblies with Reinforcement
111. Fernández Fernando, Jarabo Rocío, Asensio Eloy, Guerrero Ana (2023-09)
     Non-Destructive Tests to Evaluate the Self-Healing Capacity for a 3D Printing ECC Material
112. Nunes Gabrielly, Anjos Marcos, Lins Ana, Negreiros Ana et al. (2023-08)
     Evaluation of the Mechanical Behavior of Representative Volumetric Elements of 3DCP Masonry-Mixtures with Partial Replacement of Cement by Limestone-Filler and Metakaolin
113. Jaji Mustapha, Zijl Gideon, Babafemi Adewumi (2023-08)
     Slag-Modified Fiber-Reinforced Metakaolin-Based Geopolymer for 3D Concrete Printing Application:
     Evaluating Fresh and Hardened Properties
114. Rahal Said, Kaci Abdelhak, Skoudarli Abdeslam (2023-07)
     Evaluation of Mechanical Anisotropy-Induced by 3D Printing Process for Earth-Based Materials
115. Baldoceda Jordan, Silva Guido, Kim Suyeon, Ruiz Gaby et al. (2023-07)
     Preliminary Experimental Evaluation of Buildability Improvement Methods for Concrete for 3D Printing
116. Graser Konrad, Walzer Alexander, Hunhevicz Jens, Jähne René et al. (2023-06)
     Qualitative Technology Evaluation of Digital Fabrication with Concrete:
     Conceptual Framework and Scoreboard
117. Fernandez Letízia, Caldas Lucas, Mendoza Reales Oscar (2023-05)
     Environmental Evaluation of 3D Printed Concrete Walls Considering the Life Cycle Perspective in the Context of Social Housing
118. Sun Bochao, Li Peichen, Wang Dianchao, Ye Jun et al. (2023-03)
     Evaluation of Mechanical Properties and Anisotropy of 3D Printed Concrete at Different Temperatures
119. Ma Guowei, Hu Tingyu, Wang Fang, Liu Xiongfei et al. (2023-02)
     Magnesium Phosphate Cement for Powder-Based 3D Concrete Printing:
     Systematic Evaluation and Optimization of Printability and Printing Quality
120. Allameh Seyed, Miller Roger (2023-02)
     Evaluating the Structural Strength of Layered Concrete Reinforced with 3D-Welded Rebar
121. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2022-12)
     Earth-Based Additive Manufacturing:
     A Field-Oriented Methodology for Evaluating Material-Printability
122. Baek Seoung-Ho, Yang Jung-Ho, Ha Cheol-Woo, Shim Patrick et al. (2022-11)
     Design and Evaluation of Additive Manufactured Highly Efficient Inclined-Wing-Type Continuous Mixer
123. Demiral Nazim, Ozkan Ekinci Mehmet, Şahin Oğuzhan, İlcan Hüseyin et al. (2022-10)
     Mechanical Anisotropy Evaluation and Bonding Properties of 3D Printable Construction and Demolition Waste-Based Geopolymer Mortars
124. Mortada Youssef, Mohammad Malek, Mansoor Bilal, Grasley Zachary et al. (2022-09)
     Development of Test-Methods to Evaluate the Printability of Concrete Materials for Additive Manufacturing
125. Pott Ursula, Wolf Christoph, Petryna Yuri, Stephan Dietmar (2022-09)
     Evaluation of the Unconfined Uniaxial Compression-Test to Study the Evolution of Apparent Printable Mortar-Properties During the Early-Age Transition-Regime
126. Aydin Eylül, Kara Burhan, Bundur Zeynep, Özyurt Nilüfer et al. (2022-08)
     A Comparative Evaluation of Sepiolite and Nano-Montmorillonite on the Rheology of Cementitious Materials for 3D Printing
127. Zhang Yu, Zhang Yunsheng, Yang Lin, Liu Guojian et al. (2022-08)
     Evaluation of Aggregates, Fibers and Voids-Distribution in 3D Printed Concrete
128. Zhou Wen, McGee Wesley, Zhu He, Gökçe H. et al. (2022-08)
     Time-Dependent Fresh Properties Characterization of 3D Printing Engineered Cementitious Composites:
     On the Evaluation of Buildability
129. Liu Xiongfei, Li Qi, Wang Fang, Ma Guowei (2022-07)
     Systematic Approach for Printability Evaluation and Mechanical Property Optimization of Spray-Based 3D Printed Mortar
130. Bekaert Michiel, Tittelboom Kim, Schutter Geert (2022-06)
     Evaluation of the Bond Strength Between 3D Printed and Self-Compacting Concrete
131. Mai (née Dressler) Inka, Herding Friedrich, Lowke Dirk (2022-06)
     Evaluating the Effect of Methyl-Cellulose on Hardened State Properties in Selective Cement-Activation
132. Rodriguez Fabian, Lopez Cristian, Wang Yu, Olek Jan et al. (2022-06)
     Evaluation of Durability of 3D Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments
133. Prem Prabhat, Ravichandran Darssni, Kaliyavaradhan Senthil, Ambily Parukutty (2022-04)
     Comparative Evaluation of Rheological Models for 3D Printable Concrete
134. Cui Hongzhi, Li Yuanhong, Cao Xiangpeng, Huang Mingyang et al. (2022-03)
     Experimental Study of 3D Concrete Printing-Configurations Based on the Buildability Evaluation
135. Liu Jianan, Wang Zhenjun, Zhao Xin, Yu Cong et al. (2022-03)
     Quantitative Evaluations on Influences of Aggregate Surface Texture on Interfacial Adhesion Using 3D Printing Aggregate
136. Jiang Zhengwu, Yang Qian, Zhu Yanmei, Zhang Yi et al. (2022-03)
     Evaluating the Stiffening Effect of CSA and Sodium Carbonate on the Printability of OPC Mortar
137. Cui Hongzhi, Yu Shiheng, Cao Xiangpeng, Yang Haibin (2022-03)
     Evaluation of Printability and Thermal Properties of 3D Printed Concrete Mixed with Phase-Change-Materials
138. Heever Marchant, Plessis Anton, Bester Frederick, Kruger Jacques et al. (2022-02)
     A Mechanistic Evaluation Relating Microstructural Morphology to a Modified Mohr-Griffith Compression-Shear Constitutive-Model for 3D Printed Concrete
139. Ahmed Sara, Yehia Sherif (2022-02)
     Evaluation of Workability and Structuration-Rate of Locally Developed 3D Printing Concrete Using Conventional Methods
140. Heever Marchant, Plessis Anton, Kruger Jacques, Zijl Gideon (2022-01)
     Evaluating the Effects of Porosity on the Mechanical Properties of Extrusion-Based 3D Printed Concrete
141. Lauff Philipp, Pugacheva Polina, Rutzen Matthias, Weiss Ursula et al. (2021-11)
     Evaluation of the Behavior of Carbon-Short-Fiber-Reinforced Concrete (CSFRC) Based on a Multi-Sensory Experimental Investigation and a Numerical Multi-Scale Approach
142. Nassar Roz-Ud-Din, Soroushian Parviz, Balachandra Anagi, Nassar Shumayal et al. (2021-09)
     Evaluation of Refined Cement-Based Matrix Systems for Extrusion of Wood-Fiber Cement
143. García-Alvarado Rodrigo, Moroni-Orellana Ginnia, Banda-Pérez Pablo (2021-06)
     Architectural Evaluation of 3D Printed Buildings
144. Rubin Ariane, Hasse Jéssica, Repette Wellington (2021-01)
     The Evaluation of Rheological Parameters of 3D Printable Concretes and the Effect of Accelerating-Admixture
145. Skibicki Szymon, Pułtorak Monika, Kaszyńska Maria (2021-01)
     Evaluation of Material-Modification Using PET in 3D Concrete Printing Technology
146. Dwivedi Ashutosh, Pal Ankit, Patel Shiv, Chourasia Ajay et al. (2020-10)
     Evaluation of Model 3D Printer and Design Mix for 3D Concrete Printing
147. Arunothayan Arun, Nematollahi Behzad, Sanjayan Jay, Ranade Ravi et al. (2020-07)
     Quantitative Evaluation of Orientation of Steel-Fibers in 3D Printed Ultra-High-Performance Concrete
148. Varela Hugo, Barluenga Gonzalo, Palomar Irene (2020-07)
     Rheology Evaluation of Cement-Paste with Nano-Clay , Nano-Silica and Polymeric Admixtures for Digital Fabrication
149. Xia Ming, Nematollahi Behzad, Sanjayan Jay (2020-07)
     Shape Accuracy Evaluation of Geopolymer Specimens Made Using Particle-Bed 3D Printing
150. Mohan Manu, Rahul Attupurathu, Tittelboom Kim, Schutter Geert (2020-07)
     Evaluating the Influence of Aggregate Content on Pumpability of 3D Printable Concrete
151. Guamán-Rivera Robert, García-Alvarado Rodrigo, Martínez-Rocamora Alejandro, Cheein Fernando (2020-05)
     A Comprehensive Performance Evaluation of Different Mobile Manipulators Used as Displaceable 3D Printers of Building Elements for the Construction Industry
152. Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-05)
     Effectiveness of the Rheometric Methods to Evaluate the Build-Up of Cementitious Mortars Used for 3D Printing
153. Vishruthi M., Raghavendra S., Ravi Teja Y., Anand K. (2020-05)
     Evaluation of Cementitious Mixes for Printing
154. Rahul Attupurathu, Santhanam Manu (2020-02)
     Evaluating the Printability of Concretes Containing Lightweight Coarse Aggregates
155. Ivanova Irina, Mechtcherine Viktor (2020-01)
     Possibilities and Challenges of Constant Shear-Rate-Test for Evaluation of Structural Build-Up-Rate of Cementitious Materials
156. Lee Hojae, Kim Jang-Ho, Moon Jae-Heum, Kim Won-Woo et al. (2019-12)
     Evaluation of the Mechanical Properties of a 3D Printed Mortar
157. Nishijo Keisuke, Ohno Motohiro, Ishida Tetsuya (2019-12)
     Quantitative Evaluation of Buildability in 3D Concrete Printing Based on Shear-Vane-Test
158. Sanguinetti Paola, Almazam Khaled, Humaidan Omar, Colistra Joe et al. (2019-09)
     Evaluating the Potential of High-Performance Concrete 3D Printed Affordable Zero Energy Homes
159. Markin Slava, Nerella Venkatesh, Schröfl Christof, Guseynova Gyunay et al. (2019-07)
     Material-Design and Performance-Evaluation of Foam-Concrete for Digital Fabrication
160. Silva Wilson, Fryda Hervé, Bousseau Jean-Noël, Andreani Pierre-Antoine et al. (2019-07)
     Evaluation of Early-Age Concrete Structural Build-Up for 3D Concrete Printing by Oscillatory Rheometry
161. Cho Seung, Kruger Jacques, Zeranka Stephan, Rooyen Algurnon et al. (2019-06)
     Mechanical Evaluation of 3D Printable Nano-Silica Incorporated Fiber-Reinforced Lightweight Foam-Concrete
162. Foteinopoulos Panagis, Papacharalampopoulos Alexios, Stavropoulos Panagiotis (2019-06)
     Block-Based Analytical Hierarchy Process Applied for the Evaluation of Construction Sector Additive Manufacturing
163. Zhang Xun, Flood Ian, Zhang Yuanxin, Moud Hashem et al. (2019-06)
     A Cost-Model to Evaluate the Economic Performance of Contour Crafting
164. Hirayama Yuta, Zhang Jiali, Kawahara Yoshihiro (2019-06)
     A Method to Evaluate the Formability and Fluidity of Concrete-Based Materials for 3D Printing
165. Ashrafi Negar, Duarte José, Nazarian Shadi, Meisel Nicholas (2018-10)
     Evaluating the Relationship Between Deposition and Layer-Quality in Large-Scale Additive Manufacturing of Concrete
166. Papachristoforou Michail, Mitsopoulos Vasilios, Stefanidou Maria (2018-10)
     Evaluation of Workability Parameters in 3D Printing Concrete