Skip to content

#control

Keywords by Co - Occurrence

  1. Ding Yao, Liu Yifan, Yang Bo, Liu Jiepeng et al. (2026-01)
    Application of Artificial Intelligence Technology in 3D Concrete Printing Quality Inspection and Control:
    A State-of-the-Art Review
  2. Kim Seung, Kim Jae (2025-12)
    Vibration-Assisted Rheological Control for 3D Printing of Precast Concrete Modules
  3. Ferrari Lucia, Rizzieri Giacomo, Ferrara Liberato, Franzoni Elisa (2025-12)
    Rheological Control of Cementitious Composites Incorporating Ceramic Wastes for 3D Printing Applications
  4. Liu Xuelin, Kong Jiafeng, Chen Yidong, Wang Liang et al. (2025-12)
    Rheology and Printability Control of Low-Carbon 3D-Printed Cementitious Materials via Circular Use of Recycled Concrete Powder
  5. Diggs-McGee Brandy, Samouh Hamza, Garg Nishant (2025-11)
    Predicting Cementitious Set Times via Infrared Thermography:
    Potential Implications on Real-Time Quality Control During 3D Concrete Printing
  6. Liu Xiongfei, Wang Haonan, Chen Jinnan, Sun Yuhang et al. (2025-11)
    Fiber Orientation Control in Spray-Based 3D Printed Steel Fiber Reinforced Concrete
  7. Liu Junli, Zhang Shipeng, Hao Lucen, Wu Bo et al. (2025-10)
    Rapid Rheology Control and Stiffening of 3D-Printed Cement Mortar via CO2 Flash Mixing in a 2K Printing System
  8. Barry Mamadou, Jacquet Yohan, Perrot Arnaud (2025-10)
    Pocket Vane and Penetrometer as Quality Control Tool for Extrusion 3D Concrete Printing
  9. Kim Tae, Oh Sangwoo, Lee Jinsuk, Choi Seongcheol et al. (2025-10)
    Experimental Data-Driven Framework for Quality Control of 3D-Printed Concrete Permanent Formworks
  10. Shekhar Shashank, Kumar Manish, Mathur Rishabh (2025-10)
    Additive Manufacturing of Concrete with Low Initial Yield Strength Through Controlled Heating of Printed Layers
  11. Liu Ruiying, Xiong Zhongming, Chen Xuan, Jia Qiong et al. (2025-09)
    Industrial Waste in 3D Printed Concrete:
    A Mechanistic Review on Rheological Control and Printability
  12. Marco Giancarlo, Cheung Lok (2025-09)
    Multimodal Large Language Models for Adaptive 3D Concrete Printing:
    Real-Time Control of Materials and Settings According to Performance Requirements and Environmental Conditions
  13. Rabiei Mahsa, Moini Mohamadreza (2025-09)
    Extrusion Under Material Uncertainty with Pressure-Based Closed-Loop Feedback Control in Robotic Concrete Additive Manufacturing
  14. Xiahou Xiaer, Ding Xingyuan, Yu Ke-Ke, Lu Cong (2025-08)
    From Waste to Strength:
    Sustainable Valorization of Modified Recycled PET Fibers for Rheological Control and Performance Enhancement in 3D Printed Concrete
  15. Ishikawa Shinichi, Yamada Ryo, Tasaki Ryosuke (2025-07)
    High-Sensitivity Interlayer Force Measurement and Multi-Layer Smoothing Control for 3D Printing on Uneven Surfaces
  16. Kachalov A., Sánchez P., Mollah Md., Ezquerro J. et al. (2025-07)
    Numerical Analysis of Coaxially 3D Printed Lunar Habitats:
    Integrating Regolith and PCM for Passive Temperature Control
  17. Trung Hieu Nguyen, Minh Trieu Nguyen, Dang Tri, Thinh Nguyen (2025-05)
    Advanced Sliding Mode Control Strategy for High-Performance 3D Concrete Printing
  18. Geng Songyuan, Cheng Boyuan, Long Wujian, Luo Qiling et al. (2025-05)
    Co-Driven Physics and Machine Learning for Intelligent Control in High-Precision 3D Concrete Printing
  19. Liu Wenliang, Ji Dongsheng, Cui Weijiu, Shi Xinyu et al. (2025-05)
    Research Progress on Quality Control Method of Concrete 3D Printing Based on Computer Vision
  20. Jiang Yu, Zhang Qingxin, Tabbaa Abir, Daly Ronan (2025-03)
    The Critical Role of Time-Dependent Rheology for Improved Quality Control of 3D Printed Cementitious Structures
  21. Lori Ali, Mehrali Mehdi (2025-01)
    Filament-Geometry-Control of Printable Geopolymer Using Experimental and Data-Driven Approaches
  22. Vargas Armando, Robayo-Salazar Rafael, Gutiérrez Ruby (2024-12)
    Effects of Incorporating Fine Aggregates and Polypropylene-Micro-Fibers on the Cracking-Control of 3D Printed Cementitious Mixtures
  23. Sahoo Pitabash, Gupta Souradeep (2024-11)
    3D Printing with Geopolymer-Stabilized Excavated Earth:
    Enhancement of Printability and Engineering-Performance Through Controlled Retardation
  24. Sun Zhaoyang, Zhao Yuyang, Hou Dongshuai, Li Zongjin et al. (2024-11)
    Rheology-Control of Cement-Paste by In-Situ Polymerization for 3D Printing Applications
  25. Gürsoy Benay (2024-09)
    From Control to Uncertainty in 3D Printing with Clay
  26. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2024-09)
    Development of a Tool for Generating a Constant Volume-Flow with Peristaltic Pumps for Robot-Controlled Concrete-Extrusion
  27. Lachmayer Lukas, Quantz Jelle, Heeren Hauke, Recker Tobias et al. (2024-09)
    A Spatial Multi-Layer Control-Concept for Strand-Geometry-Control in Robot-Based Additive Manufacturing-Processes
  28. Kanagasuntharam Sasitharan, Ramakrishnan Sayanthan, Sanjayan Jay (2024-09)
    Active Rheology-Control of Concrete Using Encapsulated Accelerator as Responsive Additives for Concrete 3D Printing
  29. Gill Connor, Justham Laura, Lohse Niels, Haynes Adam et al. (2024-09)
    Measurement and Control of Serial Manipulator Robots for 3D Concrete Printing
  30. Barry Mamadou, Jacquet Yohan, Kachkouch Fatima, Perrot Arnaud (2024-09)
    Instrumentation of the Extruder Nozzle Using Load Cells:
    Towards an In-Line Quality-Control Device for 3D Printed Cement-Based Materials
  31. Rudolph Jennifer, Lowke Dirk (2024-09)
    Design and Characterisation of a Two-Component Mortar-System for Shotcrete 3D Printing:
    An Approach to the Targeted Control of Material-Properties
  32. Silva João, Wagner Gabriel, Silva Rafael, Morais António et al. (2024-07)
    Real-Time Precision in 3D Concrete Printing:
    Controlling Layer Morphology via Machine Vision and Learning Algorithms
  33. Zhang Yi, Tittelboom Kim, Schutter Geert, Jiang Zhengwu (2024-07)
    Active Rheology-Control for 3D Printable Cement-Based Materials by Temperature:
    An Exploratory Study
  34. Matos Paulo, Prigol Hellen, Schackow Adilson, Silva Nazário Samara et al. (2024-06)
    Quality-Control-Tests of Fresh 3D Printable Cement-Based Materials
  35. Kamakshi Tippabhotla, Subramaniam Kolluru (2024-05)
    Rheology-Control and 3D Concrete Printing with Fly Ash-Based Aqueous Nano-Silica Enhanced Alkali-Activated Binders
  36. An Dong, Zhang Yixia, Yang Chunhui (2024-05)
    Incorporating Coarse Aggregates into 3D Concrete Printing from Mixture Design and Process-Control to Structural Behavior and Practical Applications:
    A Review
  37. Chen Yuxuan, Zhang Longfei, Wei Kai, Gao Huaxing et al. (2024-04)
    Rheology-Control and Shrinkage-Mitigation of 3D Printed Geopolymer Concrete Using Nano-Cellulose and Magnesium-Oxide
  38. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-04)
    A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
  39. Zhang Yiyuan, Tao Yaxin, Zhang Yi, Tittelboom Kim et al. (2024-04)
    Up-Scaling Active Rheology-Control to Cement-Mortar with the Intervention of an In-Line Magnetic Field
  40. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-03)
    A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
  41. Zhang Yi, Ren Qiang, Dai Xiaodi, Tao Yaxin et al. (2024-03)
    A Potential Active Rheology-Control Approach for 3D Printable Cement-Based Materials:
    Coupling of Temperature and Viscosity-Modifiers
  42. Zhang Hanghua, Tan Yanke, Hao Lucen, Zheng Shipeng et al. (2024-02)
    Intelligent Real-Time Quality-Control for 3D Printed Concrete with Near-Nozzle Secondary-Mixing
  43. Ahi Oğulcan, Ertunç Özgür, Bundur Zeynep, Bebek Özkan (2024-02)
    Automated Flow-Rate-Control of Extrusion for 3D Concrete Printing Incorporating Rheological Parameters
  44. Bos Derk, Wolfs Robert (2023-12)
    A Quality-Control Framework for Digital Fabrication with Concrete
  45. Calderon-Cordova Carlos, Sarango Leonardo, Chamba Dennis, Sarango Roger et al. (2023-12)
    Performance-Analysis of Motion-Control-Algorithms of an Industrial-Robot-Arm Applied to 3D Concrete Printing Systems
  46. Li Huanbao, Li Zihan, Skibniewski Mirosław, Wang Liang et al. (2023-11)
    Molding-Quality-Control with Non-Linear Forming-Method in 3D Cement Printing
  47. Braumann Johannes, Singline Karl, Schwab Martin (2023-11)
    Visual Programming for Robot-Control:
    Technology Transfer Between AEC and Industry
  48. Zou Mengtong, Liu Chuanbei, Zhang Keying, Li Wuqian et al. (2023-11)
    Evaluation and Control of Printability and Rheological Properties of 3D Printed Rubberized Concrete
  49. Tabakova Vesela, Klug Christina, Schmitz Thomas (2023-10)
    Dynamic Extrusion-Control in Spot-Deposition Modeling for Porous 3D Clay-Structures
  50. Fleckenstein Julia, Bertagna Federico, Piccioni Valeria, Fechner Mareen et al. (2023-09)
    Revisiting Breuer Through Additive Manufacturing:
    Passive Solar-Control-Design-Strategies for Bespoke Concrete Building Envelope Elements
  51. Rehman Atta, Perrot Arnaud, Birru Bizu, Kim Jung-Hoon (2023-09)
    Recommendations for Quality-Control in Industrial 3D Concrete Printing Construction with Mono-Component Concrete:
    A Critical Evaluation of Ten Test-Methods and the Introduction of the Performance-Index
  52. Yue Hongfei, Zhang Zhuxian, Hua Sudong, Gao Yanan et al. (2023-09)
    Solid Waste-Based Set-on-Demand 3D Printed Concrete:
    Active Rheological-Control of Cement-Based Magneto-Rheological Fluids
  53. Lachmayer Lukas, Müller Nico, Herlyn Thilo, Raatz Annika (2023-08)
    Volume Flow-Based Process-Control for Robotic Additive Manufacturing-Processes in Construction
  54. Blagojevic Boris, Gienger Andreas, Nigl David, Blandini Lucio et al. (2023-08)
    Modeling, Feedforward-Control, and Constrained Trajectory-Generation for a Concrete-Conveyance-System
  55. Chen Mingxu, Jin Yuan, Sun Keke, Wang Shoude et al. (2023-08)
    Study on the Durability of 3D Printed Calcium-Sulphoaluminate Cement-Based Materials Related to Rheology-Control
  56. Jacquet Yohan, Perrot Arnaud (2023-07)
    Sewing Concrete Device:
    Combining In-Line Rheology-Control and Reinforcement-System for 3D Concrete Printing
  57. Pott Ursula, Jakob Cordula, Dorn Tobias, Stephan Dietmar (2023-07)
    Investigation of a Shotcrete-Accelerator for Targeted Control of Material-Properties for 3D Concrete Printing Injection-Method
  58. Mohiuddin Rafay, Cruz Policroniades Miranda, Slepicka Martin, Borrmann André (2023-07)
    Optical Process-Control for Extrusion-Based Additive Manufacturing-Methods in Construction
  59. Slepicka Martin, Helou Jalal, Borrmann André (2023-07)
    Real-Time Data Exchange Robot-Control Integration for Fabrication Information Modeling
  60. Kajzr Daniel, Myslivec Tomáš, Černohorský Josef (2023-07)
    An Open PLC-Based Robot-Control-System for 3D Concrete Printing
  61. Martin Michael, Banijamali Kasra, Kazemian Ali (2023-06)
    Reality-Capture Technologies for Automated Quality-Control During Construction 3D Printing
  62. Quah Tan, Tay Yi, Lim Jian, Tan Ming et al. (2023-03)
    Concrete 3D Printing:
    Process-Parameters for Process-Control, Monitoring and Diagnosis in Automation and Construction
  63. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2023-03)
    Twin-Pipe Pumping-Strategy for Stiffening-Control of 3D Printable Concrete:
    From Transportation to Fabrication
  64. Harbouz Ilhame, Yahia Ammar, Rozière Emmanuel, Loukili Ahmed (2023-02)
    Printing Quality-Control of Cement-Based Materials Under Flow and Rest-Conditions
  65. Parisi Fabio, Sangiorgio Valentino, Parisi Nicola, Mangini Agostino et al. (2023-01)
    A New Concept for Large Additive Manufacturing in Construction:
    Tower-Crane-Based 3D Printing Controlled by Deep-Reinforcement-Learning
  66. Septiansyah Fadlika, Prasetya Sonki, Nursanto Djoko (2022-10)
    Control and Electrical System Design Consideration for a 3D Concrete Printer
  67. Das Arnesh, Reiter Lex, Mantellato Sara, Flatt Robert (2022-10)
    Early-Age Rheology and Hydration-Control of Ternary Binders for 3D Printing Applications
  68. Chen Yu, Toosumran Nuttapon, Chehab Noura, Spanjers Henri et al. (2022-10)
    Feasibility Study of Using Desalination-Brine to Control the Stiffness and Early-Age Hydration of 3D Printable Cementitious Materials
  69. Zhao Yanhua, Meng Wei, Wang Peifu, Qian Dongqing et al. (2022-09)
    Research-Progress of Concrete 3D Printing Technology and Its Equipment System, Material, and Molding-Defect-Control
  70. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Yuan Yong et al. (2022-08)
    Stiffening Controllable Concrete Modified with Redispersible Polymer Powder for Twin-Pipe Printing
  71. Barjuei Erfan, Courteille Eric, Rangeard Damien, Marie F. et al. (2022-07)
    Real-Time Vision-Based Control of Industrial Manipulators for Layer-Width Setting in Concrete 3D Printing Applications
  72. Ribeiro João, Figueiredo Bruno, Cruz Paulo, Camões Aires (2022-07)
    Concrete AM:
    An Insight into the Control of Main Parameters
  73. Bos Derk, Wolfs Robert (2022-06)
    Automated Visual Inspection of Near-Nozzle Droplet-Formation for Quality-Control of Additive Manufacturing
  74. Lachmayer Lukas, Dörrie Robin, Kloft Harald, Raatz Annika (2022-06)
    Process-Control for Additive Manufacturing of Concrete Components
  75. Roussel Nicolas, Buswell Richard, Ducoulombier Nicolas, Ivanova Irina et al. (2022-06)
    Assessing the Fresh Properties of Printable Cement-Based Materials:
    High-Potential Tests for Quality-Control
  76. Wijaya Ignasius, Kreiger Eric, Masud Arif (2022-05)
    An Elastic‐Inelastic Model and Embedded Bounce‐Back-Control for Layered Printing with Cementitious Materials
  77. Zhao Zhihui, Chen Mingxu, Jin Yuan, Lu Lingchao et al. (2022-05)
    Rheology-Control Towards 3D Printed Magnesium-Potassium-Phosphate-Cement Composites
  78. Mukhametrakhimov Rustem, Ziganshina Liliya (2022-04)
    Improvement of Technology and Quality-Control of 3DCP
  79. Mechtcherine Viktor, Tittelboom Kim, Kazemian Ali, Kreiger Eric et al. (2022-04)
    A Roadmap for Quality-Control of Hardening and Hardened Printed Concrete
  80. Chen Mingxu, Li Haisheng, Yang Lei, Wang Shoude et al. (2022-03)
    Rheology and Shape-Stability-Control of 3D Printed Calcium-Sulphoaluminate-Cement Composites Containing Paper-Milling-Sludge
  81. Qi Li-gang, Bai Jie, Huang Qing-long, Yang Yan et al. (2022-03)
    Mobile 3D Printing-Techniques for Construction Engineering:
    Outdoor Navigation and Printing Quality-Control
  82. Břoušek Josef, Petr Tomas, Beran Leoš, Myslivec Tomáš et al. (2022-03)
    Robotic Arm-Design, Development and Control for Printing Cement-Mixtures
  83. Lachmayer Lukas, Recker Tobias, Raatz Annika (2022-03)
    Contour-Tracking-Control for Mobile Robots Applicable to Large-Scale Assembly and Additive Manufacturing in Construction
  84. Shao Lijing, Feng Pan, Zuo Wenqiang, Wang Haochuan et al. (2022-02)
    A Novel Method for Improving the Printability of Cement-Based Materials:
    Controlling the Releasing of Capsules Containing Chemical Admixtures
  85. Wangler Timothy, Flatt Robert, Roussel Nicolas, Perrot Arnaud et al. (2022-01)
    Printable Cement-Based Materials:
    Fresh Properties Measurements and Control
  86. Kajzr Daniel, Břoušek Josef, Petr Tomas, Beran Leoš et al. (2021-12)
    New Design of PLC-Based Robotic Control System for Concrete Printing in Building Construction
  87. Yuan Philip, Zhan Qiang, Wu Hao, Beh Hooi et al. (2021-11)
    Real-Time Tool-Path-Planning and Extrusion-Control-Method for Variable-Width 3D Concrete Printing
  88. Jiao Dengwu, Shi Caijun, Schutter Geert (2021-11)
    Magneto-Rheology-Control in 3D Concrete Printing:
    A Rheological Attempt
  89. Deshmukh Aparna, Heintzkill Reed, Huerta Rosalba, Sobolev Konstantin (2021-11)
    Rheological Response of Magnetorheological Cementitious Inks Tuned for Active Control in Digital Construction
  90. Ko Lesley, Moro Sandro, Bury Jeff, Vickers Tom et al. (2021-11)
    Rheology and Setting Control of Concrete for Digital Construction
  91. Pattaje Sooryanarayana Karthik, Hawkins Kathleen, Stynoski Peter, Lange David (2021-11)
    Controlling Three-Dimensional-Printable Concrete with Vibration
  92. Blagojevic Boris, Schonemann Benjamin, Nigl David, Blandini Lucio et al. (2021-10)
    Trajectory-Planning for Concrete Element Fabrication with Optimal Control
  93. Wolfs Robert, Salet Theo, Roussel Nicolas (2021-10)
    Filament-Geometry-Control in Extrusion-Based Additive Manufacturing of Concrete:
    The Good, the Bad and the Ugly
  94. Breseghello Luca, Naboni Roberto (2021-07)
    Adaptive Tool-Path:
    Enhanced Design and Process-Control for Robotic 3DCP
  95. Jenkins Morgan, Brand Alexander (2021-05)
    Aggregate Moisture-Content and Fresh Property-Control-Measures in Cementitious Mortars
  96. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Yuan Yong et al. (2021-02)
    Stiffening Control of Cement-Based Materials Using Accelerators in In-Line Mixing Processes:
    Possibilities and Challenges
  97. Xu Jiabin, Chen Mingxu, Zhao Zhihui, Li Laibo et al. (2021-01)
    Printability and Efflorescence-Control of Admixtures-Modified 3D Printed White Portland-Cement-Based Materials Based on the Response-Surface-Methodology
  98. Antoni Antoni, Widjaya David, Wibowo Alexander, Chandra Jimmy et al. (2020-12)
    Using Calcium Oxide and Accelerator to Control the Initial Setting-Time of Mortar in 3D Concrete Printing
  99. Sanjayan Jay, Jayathilakage Roshan, Rajeev Pathmanathan (2020-11)
    Vibration-Induced Active Rheology-Control for 3D Concrete Printing
  100. Xu Xuchu, Wang Ruoyu, Cao Qiming, Feng Chen (2020-10)
    Towards 3D-Perception and Closed-Loop-Control for 3D Construction Printing
  101. Mai (née Dressler) Inka, Freund Niklas, Lowke Dirk (2020-07)
    Control of Strand Properties Produced with Shotcrete 3D Printing by Accelerator Dosage and Process Parameters
  102. Vukorep Ilija, Zimmermann Gregor, Sablotny Tino (2020-07)
    Robot-Controlled Fabrication of Sprayed Concrete Elements as a Cyber-Physical-System
  103. Szabó Anna, Reiter Lex, Lloret-Fritschi Ena, Wangler Timothy et al. (2020-07)
    ACDC:
    The Admixture-Controlled Digital Casting and Its Application to Thin-Folded Concrete Structures
  104. Chen Mingxu, Yang Lei, Zheng Yan, Huang Yongbo et al. (2020-04)
    Yield-Stress and Thixotropy-Control of 3D Printed Calcium-Sulfoaluminate Cement Composites with Metakaolin Related to Structural Build-Up
  105. Lao Wenxin, Li Mingyang, Wong Teck, Tan Ming et al. (2020-02)
    Improving Surface-Finish-Quality in Extrusion-Based 3D Concrete Printing Using Machine-Learning-Based Extrudate-Geometry-Control
  106. Das Arnesh, Reiter Lex, Wangler Timothy, Flatt Robert (2019-09)
    Hydration-Control of Ternary Cements for Digital Fabrication with Concrete
  107. Nam Young, Hwang Young, Park Ji, Lim Yun (2019-02)
    Fiber-Reinforced Cementitious Composite Design with Controlled Distribution and Orientation of Fibers Using Three-Dimensional Printing Technology
  108. Kazemian Ali, Yuan Xiao, Davtalab Omid, Khoshnevis Behrokh (2019-01)
    Computer-Vision for Real-Time Extrusion-Quality-Monitoring and Control in Robotic Construction
  109. Schutter Geert, Lesage Karel (2018-09)
    Active Control of Properties of Concrete:
    A (P)Review
  110. Chee Ryan, Tan Wei, Goh Wei, Amtsberg Felix et al. (2018-09)
    Concrete Fabrication by Digitally Controlled Injection
  111. Jones Scott, Bentz Dale, Martys Nicos, George William et al. (2018-09)
    Rheological Control of 3D Printable Cement-Paste and Mortars
  112. Marchon Delphine, Kawashima Shiho, Bessaies-Bey Hela, Mantellato Sara et al. (2018-05)
    Hydration- and Rheology-Control of Concrete for Digital Fabrication:
    Potential Admixtures and Cement-Chemistry
  113. Chee Ryan, Tan Wei, Goh Wei, Amtsberg Felix et al. (2018-05)
    Locally Differentiated Concrete by Digitally Controlled Injection
  114. Scotto Fabio, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias et al. (2018-05)
    Adaptive Control-System for Smart Dynamic Casting:
    Defining Fabrication-Informed Design-Tools and Process-Parameters in Digital Fabrication-Processes
  115. Sarakinioti Maria, Turrin Michela, Konstantinou Thaleia, Tenpierik Martin et al. (2018-03)
    Developing an Integrated 3D Printed Façade with Complex Geometries for Active Temperature-Control
  116. Nam Young, Hwang Young, Park Ji, Lim Yun (2018-02)
    Feasibility Study to Control Fiber-Distribution for Enhancement of Composite Properties via Three-Dimensional Printing
  117. Kajzr Daniel, Beran Leoš, Záda Václav (2017-10)
    Development of a Robotic Arm Suitable for Demonstration of Advanced Control Methods
  118. Khalil Noura, Aouad Georges, Cheikh Khadija, Rémond Sébastien (2017-09)
    Use of Calcium-Sulfoaluminate-Cements for Setting-Control of 3D Printing Mortars
  119. Zuo Zibo, Gong Jian, Huang Yulin (2017-07)
    Performance of 3D Printing in Construction by Using Computer-Control-Technology
  120. Panda Biranchi, Lim Jian, Mohamed Nisar, Paul Suvash et al. (2017-07)
    Automation of Robotic Concrete Printing Using Feedback-Control-System