Skip to content

#system

Keywords by Co - Occurrence

  1. Reis Rui, Aroso Francisca, Camões Aires, Brandão Filipe et al. (2026-04)
    Carbonation and Chloride Attack in 3D-Printed Cementitious Materials:
    A Systematic Durability Review
  2. Mostafavi Sina, Motejano-Hernandez Edgar, Bagheri Bahar, Etemadi Ali et al. (2026-04)
    Robotic Concrete 3D Printing Continuous Toolpath Planning:
    From Single Curve to Voxel-Based Systems for Design-to-Production of Urban Furnitures
  3. Mastropasqua Antonio, Lagrasta Francesco, Nicolò Michele, Pontrandolfo Pierpaolo (2026-03)
    Investigating the Environmental Impact of Additive Construction:
    A Systematic Analysis of the Life Cycle Assessment Studies
  4. Pessoa Sofia, Lucas Sandra, Simões Nuno, Guimarães Ana (2026-03)
    Drying Process in a 3D-Printed Multilayer Wall System:
    An Experimental and Numerical Analysis
  5. Lal Dhirajkumar, Rangari Vinay, Khare Karan (2026-03)
    Structural Optimization and Cost-Efficient Development of an Indigenous Gantry-Type 3D Concrete Printing System for Scalable Construction Applications
  6. Sheng R., Yuan Y., Zhang J.-Y., Zhang J.-L. (2026-03)
    Optimization of Mixing Time for Printcrete Using a Non-Contact Monitoring System
  7. Gomez Enrique, Varela Hugo, Barluenga Gonzalo (2026-03)
    Evaluation of Cone-Penetration Test as a Rheology Quality-Control Field-Oriented Test for 3D Printing Cement-Based Systems
  8. Barbhuiya Salim, Qazi Nadeem, Das Bibhuti, Katare Vasudha (2026-02)
    Machine Learning Integration for Smarter, More Adaptive Systems in Large-Scale 3D Printing
  9. Mishra Sanjeet, Das Bibhuti, Chandrasekaran Rajasekaran, Barbhuiya Salim (2026-02)
    Tuning the Hydration and Printability in Nano-Modified Quaternary Binder Systems for 3D-Printed Mortar
  10. Javan Kazem, Chaggar Pooja, Darestani Mariam, Markhali Bijan et al. (2026-02)
    Workability of Geopolymer Concrete and Mortar Materials: A Systematic Review of Influencing Parameters and Optimization for Sustainable Construction Materials
  11. Fang Yuan, Zhang Wenyang, Xiao Yuan, Zhang Zuhua et al. (2026-02)
    Enhancing the Printability and Mechanical Strength of 3D-Printed Geopolymers through Li2O-Al2O3-SiO2-H2O System Regulation
  12. Patel Aniket, Santhanam Manu (2026-01)
    Rheological and Fresh-State Characterization for 3D-Printable Concrete:
    Evaluating Printability Across Different Binder Systems
  13. Kazemian Mona, Rogers Carl (2026-01)
    3D Printed Green Walls:
    Enhancing Living Systems Through Digital Fabrication
  14. Kechagia Aikaterini, Tzounis Lazaros, Kechagias John (2026-01)
    3D Printing Concrete:
    A Short Review of Systems and Materials
  15. Agegn Adamu, Regassa Yohannes, Angassa Kenatu, Mekonnen Kebede (2026-01)
    Systematic Review on 3D Concrete Printing Technology:
    Breakthroughs and Challenges
  16. Reis Rui, Aroso Francisca, Brandão Filipe, Camões Aires et al. (2026-01)
    A Systematic Review on the Durability of 3D-Printed Cementitious Materials:
    Insights and Research Challenges
  17. Lapusan Ciprian, Negrutiu Camelia, Sosa Ioan (2026-01)
    Multi-Criteria Decision Framework for Optimal Robotic System Selection in 3D Concrete Printing
  18. Iqbal Imtiaz, Kasim Tala, Besklubova Svetlana, Inqiad Waleed et al. (2025-12)
    Exploring Knowledge Domains and Future Research Directions in 3D Printed Concrete:
    A Bibliometric and Systematic Review
  19. Taborda-Llano Isabella, Hoyos-Montilla Ary, Asensio Eloy, Guerrero Ana et al. (2025-12)
    Influence of the Construction Process Parameters on the Mechanical Performance and Durability of 3D Printed Concrete:
    A Systematic Review
  20. Knychalla Bruno, Wiesner Christian, Sonnleitner Patrick, Kowalczyk Magdalena et al. (2025-12)
    Integrated Fiber Forms:
    Functionally Integrated Slab Systems Through Additive Manufacturing and Natural Fiber Reinforcement
  21. Tinoco Matheus, Lima Moura Paiva Rayane, Andrade Luiza, Mendoza Reales Oscar (2025-12)
    Hybrid 3D Printable Mixtures Incorporating Fine Earth, Portland Cement, and Fly Ash:
    A Sustainable Alternative to Cement-Intensive Systems
  22. Liu Junli, Zhang Shipeng, Hao Lucen, Wu Bo et al. (2025-10)
    Rapid Rheology Control and Stiffening of 3D-Printed Cement Mortar via CO2 Flash Mixing in a 2K Printing System
  23. Fahim Abdullah, Bukhari Syed, Khanzadeh Moradllo Mehdi (2025-09)
    Additive Manufacturing of Carbonatable Ternary Cementitious Systems with Cellulose Nanocrystals
  24. Lopes de Aquino Brasil Alexander, Carmo Pena (2025-09)
    A Systematic Review of Robotic Additive Manufacturing Applications in Architecture, Engineering, and Construction
  25. Marifah Sofa, Saputri Utamy, Permadi Dio (2025-09)
    Systematic Literature Review:
    3D Printing Technology for Sustainable Construction Innovation
  26. Ozturk Onur, Lunsford Caleb, Strait James, Nair Sriramya (2025-08)
    Breaking Barriers in Underwater Construction:
    A Two-Stage 3D Printing System with On-Demand Material Adaptation
  27. Cai Yilin, Hartell Julie, Aryal Ashrant (2025-07)
    Real-Time Multimodal Sensing System for Additive Construction by Extrusion:
    Integrating Thermal, Depth and RGB Data
  28. Abdelaziz Mohamed, Vukorep Ilija, Mahdy Deena (2025-07)
    Exploring Extreme 3D Printed Clay Overhangs with Integrated Active Hot Air Drying System on Robotic Arm
  29. Liang Jingwen, Zeng Zuo, Wang Penglin, Wang Zhongxu et al. (2025-07)
    Emergency Response Mobile 3D Printing System:
    A Case Study in Rapid Manufacturing of Polyurethane Foam Bridges
  30. Pessoa Ana Sofia, Lucas Sandra, Simões Nuno, Guimarães Ana (2025-07)
    Heat Transfer in a 3D-Printed Multilayer Wall System:
    An Experimental and Numerical Analysis
  31. Irshidat Mohammad, Amjad Umar, Kumar Kishor, John John et al. (2025-06)
    Enhancing the Mix Design in 3D Concrete Printing Through Systematic Optimization Process
  32. Robens-Radermacher Annika, Kujath Cezary, Bos Freek, Mechtcherine Viktor et al. (2025-06)
    Design and Implementation of a Database System for Querying, Sharing, and Analyzing Experimental Data:
    Mechanical Properties of 3D Printed Concrete
  33. Huang Shuyi, Anton Ana-Maria, Dillenburger Benjamin, Xu Weiguo (2025-06)
    Lamella-Inspired 3D Concrete Printed Column-Slab System:
    Balancing Act for Productivity and Sustainability
  34. Wijethunge Anjalee, Samarasinghe Don, Le An, Gajanayake Akvan et al. (2025-06)
    A Systematic Review on Sustainable 3D Concrete Printing:
    Opportunities and Challenges
  35. Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-06)
    A Systematic Literature Review on the Thermal Behaviour of Building Elements Constructed Through 3D Concrete Printing (3DCP)
  36. Ribeiro João, Campos Tatiana, Brandão Filipe, Figueiredo Bruno et al. (2025-06)
    3DCP Composite Systems:
    Additive Manufacturing of a Concrete and Cellulose Interlocking Wall
  37. Placzek Gerrit, Dahlberg Maike, Thormählen Jan, Schwerdtner Patrick (2025-06)
    How Productive Is 3D Concrete Printing?:
    A Systematic Review
  38. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2025-06)
    Experimental Analysis of the Structural Behavior of Hybrid Concrete 3D Printed-Cast Beam Systems
  39. García-Alvarado Rodrigo, García-Alvarado Rodrigo, Bunster Victor, Muñoz-Sanguinetti Claudia (2025-06)
    Additive Construction 4.0:
    A Systematic Review of 3D Concrete Printing for Construction 4.0
  40. Hiremath Shivashankarayya, Mathapati Gururaj, Chiniwar Dundesh, Vishwanatha H. (2025-05)
    Performance Evaluation of Cementitious Composites by Designing an Extrusion System for Construction 3D Printing
  41. Demirbaş Ali, Tuğluca Merve, Şahin Oğuzhan, İlcan Hüseyin et al. (2025-05)
    A Comprehensive Study on the Valorization of Recycled Concrete Aggregates in 3D-Printable Cementitious Systems
  42. Shi Ye, Han Li, Wu Pengtao, Dai Kaichao et al. (2025-04)
    Design of 3D Printing Green Ultra-High Performance Concrete Based on Binder System Optimization
  43. İlcan Hüseyin, Külak Adnan, Şahin Oğuzhan, Aldemir Alper et al. (2025-04)
    Reinforcement and Modular System for 3DCP Geopolymer Structures Using Construction and Demolition Waste
  44. Oladunni Oluwole, Lee Carman, Ibrahim Idowu, Olanrewaju Oludolapo (2025-03)
    Advances in Sustainable Additive Manufacturing:
    A Systematic Review for Construction Industry to Mitigate Greenhouse Gas Emissions
  45. Gulati Hemant, Lu Tianxing (2025-03)
    Customized 3D Printable Concrete:
    A Systematic Review of Challenges, Methodologies, and Adoption Strategies
  46. Ur Rehman Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-03)
    Systematic Literature Review of the Evaluation of the Thermal Conductivity of 3D Concrete Printed Building Elements
  47. Zuo Zibo, Zhang Yamei, Li Jin, Huang Yulin et al. (2025-03)
    Systematic Workflow for Digital Design and On-Site 3D Printing of Large Concrete Structures:
    A Case Study of a Full-Size Two-Story Building
  48. Zafar Muhammad, Shahid Adnan, Sedghi Reza, Hojati Maryam (2025-03)
    Optimization of Biopolymer Additives for 3D Printable Cementitious Systems:
    A Design of Experiment Approach
  49. Zhao Hongyu, Wang Xiangyu, Sun Junbo, Wu Fei et al. (2025-03)
    Automated Analysis System for Micro-Defects in 3D Printed Concrete
  50. Aziz Saqib, Alexander Bradley, Gengnagel Christoph, Loutfi Jamila (2024-12)
    Minimal Mineral ‑ Rethinking Ceiling Systems:
    Shaping the Future of Sustainable Construction
  51. Zhao Shuai, Zhou Ran, Luo Mingming, Liu Jianfei et al. (2024-12)
    Distributed Fiber Optic Sensing System for Vibration Monitoring of 3D Printed Bridges
  52. Venugopal Reddy P., Nakkeeran G., Roy Dipankar, Alaneme George (2024-11)
    Evaluating the Use of Recycled Fine Aggregates in 3D Printing:
    A Systematic Review
  53. Gomaa Shady, Irizarry Elmer, Ahmed Ayesha, Rosa Raul et al. (2024-11)
    3D Printing of Ultra-High-Performance Concrete:
    Shape Stability for Various Printing Systems
  54. Dias José, Brandão Filipe, Castro André, Félix Maria (2024-11)
    Designing Tomorrow's Coral Reefs:
    3DCP Potential in Innovative Artificial Coral-Reefs-Systems Development
  55. Carvalho João, Figueiredo Bruno, Cruz Paulo (2024-11)
    Ceramic AM and Beyond:
    The Potential of Hybrid Construction Systems
  56. Loaiza Sebastián, Ortiz Albert, Gómez Daniel, García Alvarez José et al. (2024-11)
    3D Printing Applied to Building Development Around the World:
    A Systematic Literature Review
  57. Lu Yu, Chen Haohua, Tomac Ingrid, McCartney John (2024-10)
    Analytical and Numerical Investigation of Gravity Anchors for Floating Photovoltaic Systems
  58. Nakanishi Reina, Ogura Hiroki, Yamamoto Shinya, Abe Hiroyuki et al. (2024-10)
    Design and Development of a Shape Measurement System for 3D Construction Printing with a Manipulator
  59. Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-10)
    Efficient Production of Pre-Cast Concrete Staircases Using Additive-Manufactured, Component-Integrated Formworks Systems
  60. García-Alvarado Rodrigo, Soza-Ruiz Pedro, Valenzuela-Astudillo Eduardo, Martuffi-Lazo Daniela et al. (2024-09)
    Development of a Generative Design System for 3D Printed Houses in Chile
  61. Nan Cristina (2024-09)
    The Computational Clay Column:
    Computational Ceramic Systems with Additive Manufacturing
  62. Yang Min, Yao Xiaofei, Zhao Liguo, Zhang Yamei et al. (2024-09)
    Bridging Ancient Artistry and Modern Engineering:
    A 3D Printed Concrete Arch Bridge Inspired by Millennium-Old Bronze Patterns Using an Integrated Concrete 3D Printing System
  63. Farra Ramzi, Mazanec Oliver, Ducoulombier Nicolas, Mallet Alban (2024-09)
    Toward the Optimal Use of Local Cementitious Materials Through Novel Admixture-Technology and a Dedicated 2K-Printing-System
  64. Hanžič Lucija, Šter Katarina, Štefančič Mateja (2024-09)
    Implementing the Excess-Paste-Concept for a Systematic Mix-Design of Printable Concrete
  65. Lima Lucas, Wangler Timothy, Sanchez Asel, Anton Ana-Maria et al. (2024-09)
    Durability of 3D Printed Concrete:
    Performance-Assessment of a Two-Component System Against Water Absorption, Carbonation, and Chloride-Ingress
  66. Zhang Hanghua, Hao Lucen, Zhang Shipeng, Xiao Jianzhuang et al. (2024-09)
    Real-Time Monitoring and Feedback Operation System for 3D Printed Concrete Based on Computer-Vision
  67. Ertuğrul Onur, Özen Ömer, Oktay Didem, Yazar Tuğrul et al. (2024-09)
    Improvement of Rheological Properties and Printability of Sodium-Carbonate Activated Slag-Based Systems
  68. Mackin Anthony, Migliorino Jenna, Farhoud Hamdy, Mantawy Islam (2024-09)
    Is Additive Construction Ready for Seismic Regions?:
    A New Seismic Protective System Enabled by Additive Construction
  69. Rudolph Jennifer, Lowke Dirk (2024-09)
    Design and Characterisation of a Two-Component Mortar-System for Shotcrete 3D Printing:
    An Approach to the Targeted Control of Material-Properties
  70. Egawa Ryo, Nezu Shoichi, Nishijo Keisuke, Ohno Kazunori et al. (2024-09)
    Different Sized Metal Reinforcement Insertion System Using Cartridge Replacement Mechanism for 3D Concrete Printer
  71. Jacquet Yohan, Perrot Arnaud (2024-09)
    Hygroscopic Insulation of Open Matrix Core Wall System as a Strategy to Enhance Buildability of 3D Printed Earth-Based Materials Structures
  72. Hanifa Mohamad, Figueiredo Bruno, Mahdy Deena, Mendonça Paulo et al. (2024-08)
    Continuum Optimization of 3D Printed Self-Supported Shell:
    Hybrid Strategy for Crafting Ribbed System
  73. Bodea Serban, Dell’Endice Alessandro, Aloutsanidis Vasilis, Bürgin Theophil et al. (2024-08)
    Phoenix 3D Concrete-Printed Bridge:
    Falsework System and Construction Process Development
  74. Abbasnejad Behzad, Soltani Sahar, Karamoozian Amirhossein, Gu Ning (2024-08)
    A Systematic Literature Review on the Integration of Industry 4.0 Technologies in Sustainability Improvement of Transportation Construction Projects:
    State of the Art and Future Directions
  75. Wangler Timothy, Tao Yaxin, Das Arnesh, Mahmoudi Matineh et al. (2024-08)
    Aluminate 2K Systems in Digital Concrete:
    Process, Design, Chemistry, and Outlook
  76. Bhattacherjee Shantanu, Jain Smrati, Santhanam Manu (2024-07)
    Investigating the Interaction of Limestone-Calcined-Clay and OPC-Based Systems with a Methylhydroxyethyl-Cellulose-Based Viscosity-Modifier Used for 3D Printable Concrete
  77. Teng Fei, Zhang Dong, Li Heng, Weng Yiwei (2024-07)
    Feasibility Study on Reinforcement Placement with a BIM-Enabled Collaborative Robot System
  78. Sadoughi Arezou, Kouhirostami Maryam, Kouhirostamkolaei Mahtab, Qi Bing et al. (2024-06)
    Autonomous Building Design for Manufacturing and Assembly:
    A Systematic Review of Design Application, Challenges, and Opportunities
  79. Melter Oto, Čítek David, Hvizdal Ales, Gabriel Michael et al. (2024-06)
    Development of a Robotic Fabrication System for Cementitious Materials
  80. Wu Chengde, Evans Pete (2024-05)
    An Integrated System for Improving 3D Concrete Printing Process
  81. Jhun Jihye, Lee Dong-Hyun, Rehman Atta, Kang Seungwoo et al. (2024-05)
    Development of a Real-Time Geometric Quality Monitoring System for Extruded Filaments of 3D Concrete Printing Construction
  82. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-04)
    A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
  83. Zaid Osama, Ouni Mohamed (2024-04)
    Advancements in 3D Printing of Cementitious Materials:
    A Review of Mineral Additives, Properties, and Systematic Developments
  84. Peng Yiming, Unluer Cise (2024-04)
    Understanding the Rheological Behavior of Reactive Magnesia-Metakaolin System in the Context of Digital Construction
  85. Curth Alexander, Alvarez Eduardo, Feickert Kiley, Mueller Caitlin et al. (2024-04)
    Multi-Material Fabrication for Low-Carbon Construction:
    An Optimised Floor System for Affordable Housing in Mexico
  86. Chadha Kunaljit, Vasey Lauren, Kango Ananya, Aejmelaeus-Lindström Johan et al. (2024-04)
    Impact Printed Structures:
    Design Systems and Construction Strategies
  87. Du Song, Teng Fei, Zhuang Zicheng, Zhang Dong et al. (2024-03)
    A BIM-Enabled Robot-Control System for Automated Integration Between Rebar-Reinforcement and 3D Concrete Printing
  88. İlcan Hüseyin, Özkılıç Hamza, Tuğluca Merve, Şahmaran Mustafa (2024-02)
    Inter-Layer Mechanical Performance of 3D Printed Cementitious Systems:
    A Comprehensive Study on Operational and Material Parameters
  89. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2024-02)
    Hydration and Microstructure of Calcium-Sulfoaluminate-Portland-Cement Binder Systems for Set-on-Demand Applications
  90. Chen Kailun, Liu Qiong, Chen Bing, Zhang Shishun et al. (2024-01)
    A Review on Effect of Raw Materials on the Performance of 3D Printed Geopolymer System for Construction
  91. Schwartz Thibault (2023-12)
    HAL Robotics:
    From Automated Architectural Design for Fabrication, to Architecting Automated Manufacturing Systems
  92. Remke Sebastian, Sant Gaurav, Gädt Torben (2023-12)
    Investigation of a Hybrid Binder System for Large-Scale 3D Printing
  93. Felfili Guimarães Gabriela, Oliveira Marcos, Almeida Martinelli Juliana (2023-12)
    Performance-Evaluation of the 3D Printing System Through Fault-Tree-Analysis-Method
  94. Calderon-Cordova Carlos, Sarango Leonardo, Chamba Dennis, Sarango Roger et al. (2023-12)
    Performance-Analysis of Motion-Control-Algorithms of an Industrial-Robot-Arm Applied to 3D Concrete Printing Systems
  95. Pazols Maximiliano, Raspall Félix (2023-12)
    Terra Fibrosum:
    Continuous Fibers Reinforcement System for Robotized 3D Printing with Earth for Architecture
  96. Dams Barrie, Shepherd Paul, Ball Richard (2023-11)
    Development and Performance Evaluation of Fibrous Pseudoplastic Quaternary Cement Systems for Aerial Additive Manufacturing
  97. Coniglo Alfonso, Palmiotta Annarota, Amato Michele, Gigliotti Rosario (2023-11)
    Earth-3D Printing for Non-Structural Elements of Modular Steel Buildings:
    Proposal for an Innovative and Sustainable Construction System
  98. Placzek Gerrit, Schwerdtner Patrick (2023-10)
    From Process to System:
    A Review on the Implications of Concrete 3D Printing on Project Delivery
  99. Asaf Ofer, Bentur Arnon, Larianovsky Pavel, Sprecher Aaron (2023-10)
    From Soil to Printed Structures:
    A Systematic Approach to Designing Clay-Based Materials for 3D Printing in Construction and Architecture
  100. Zamani Alireza, Mohseni Alale, Çapunaman Özgüç (2023-09)
    Reconfigurable Formwork System for Vision-Informed Conformal Robotic 3D Printing
  101. Motalebi Arash, Khondoker Mohammad, Kabir Golam (2023-08)
    A Systematic Review of Life Cycle Assessments of 3D Concrete Printing
  102. Blagojevic Boris, Gienger Andreas, Nigl David, Blandini Lucio et al. (2023-08)
    Modeling, Feedforward-Control, and Constrained Trajectory-Generation for a Concrete-Conveyance-System
  103. Silva Guido, Burgos Valeria, Ñañez Robert, Kim Suyeon et al. (2023-07)
    Soil-Cement Matrices for Additive Construction:
    3D Printing System Validation and Printing Tests
  104. Jacquet Yohan, Perrot Arnaud (2023-07)
    Sewing Concrete Device:
    Combining In-Line Rheology-Control and Reinforcement-System for 3D Concrete Printing
  105. Kajzr Daniel, Myslivec Tomáš, Černohorský Josef (2023-07)
    An Open PLC-Based Robot-Control-System for 3D Concrete Printing
  106. Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-06)
    A System-Development-Strategy of a Digital Construction for Building Frames
  107. Tao Yaxin, Rahul Attupurathu, Mohan Manu, Schutter Geert et al. (2023-05)
    Enhancing Mechanical Performance of Twin-Pipe Printable Concrete Using a Binary Binder System
  108. Simioni Fernanda, Rangel Bárbara, Campos Nadine, Teixeira João (2023-04)
    3D Printing for Construction:
    A Systematic Review of Its Sustainability
  109. Şahin Hatice, Temel Müge, Mardani Ali (2023-04)
    Determination of Optimum VMA Utilization Dosage in Cementitious Systems:
    In Terms of Rheological and Flowability Properties
  110. Chen Hao, Zhang Daobo, Chen Peng, Li Ning et al. (2023-03)
    A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing
  111. Wu Hao, Gu Sijia, Gao Xiaofan, Luo Jiaxiang et al. (2023-03)
    Extrusion to Masoning:
    Robotic 3D Concrete Printing of Concrete Shells as Building Floor System
  112. Ma Guowei, Hu Tingyu, Wang Fang, Liu Xiongfei et al. (2023-02)
    Magnesium Phosphate Cement for Powder-Based 3D Concrete Printing:
    Systematic Evaluation and Optimization of Printability and Printing Quality
  113. Tao Yaxin, Mohan Manu, Rahul Attupurathu, Schutter Geert et al. (2023-02)
    Development of a Calcium Sulfoaluminate-Portland Cement Binary System for Twin-Pipe 3D Concrete Printing
  114. Oval Robin, Nuh Mishael, Costa Eduardo, Madyan Omar et al. (2023-01)
    A Prototype Low-Carbon Segmented Concrete Shell Building Floor System
  115. Zhu Lingli, Yao Jie, Zhao Yu, Ruan Wenqiang et al. (2022-12)
    Effects of Composite Cementation System on Rheological and Working Performances of Fresh 3D Printable Engineered Cementitious Composites
  116. Miranda Luiza, Marchesini Flávio, Lesage Karel, Schutter Geert (2022-12)
    The Evolution of the Rheological Behavior of Hydrating Cement Systems:
    Combining Constitutive Modeling with Rheometry, Calorimetry and Mechanical Analyses
  117. Bai Gang, Wang Li, Wang Fang, Ma Guowei (2022-12)
    Assessing Printing Synergism in a Dual 3D Printing System for Ultra-High-Performance Concrete In-Process Reinforced Cementitious Composite
  118. Placzek Gerrit, Schwerdtner Patrick (2022-12)
    A Preliminary Study of the Impact of Robotic Systems on Concrete 3D Printing in the Construction Industry
  119. Strohle Max, Sadique Monower, Dulaimi Anmar, Kadhim Mustafa (2022-11)
    Prospect and Barrier of 3D Concrete:
    A Systematic Review
  120. Salaimanimagudam M., Jayaprakash Jaganathan (2022-11)
    Optimum Selection of Reinforcement, Assembly, and Formwork System for Digital Fabrication Technique in Construction Industry:
    A Critical Review
  121. Septiansyah Fadlika, Prasetya Sonki, Nursanto Djoko (2022-10)
    Control and Electrical System Design Consideration for a 3D Concrete Printer
  122. Patterson Albert, Vajipeyajula Bhaskar, Norris William (2022-10)
    System Architecture and Design Parameters for Extrusion-Based Autonomous Construction Systems
  123. Frangez Valens, Taha Nizar, Feihl Nicolas, Lloret-Fritschi Ena et al. (2022-10)
    Geometric Feedback System for Robotic Spraying
  124. Ibrahim Iman, Eltarabishi Fatma, Abdalla Hadeer, Abdallah Mohamed (2022-10)
    3D Printing in Sustainable Buildings:
    Systematic Review and Applications in the United Arab Emirates
  125. Ma Jiaming, Gomaa Mohamed, Bao Ding, Javan Anooshe et al. (2022-09)
    Print Nervi:
    Design and Construction of a Ribbed Floor System in the Digital Era
  126. Zhao Yanhua, Meng Wei, Wang Peifu, Qian Dongqing et al. (2022-09)
    Research-Progress of Concrete 3D Printing Technology and Its Equipment System, Material, and Molding-Defect-Control
  127. Saelens Lien, Tittelboom Kim, Caspeele Robby, Wan-Wendner Roman (2022-09)
    Topology-Optimization of Structural Beam Systems considering 3D Concrete Printing Technology-Constraints
  128. Žujović Maša, Obradović Radojko, Rakonjac Ivana, Milošević Jelena (2022-08)
    3D Printing Technologies in Architectural Design and Construction:
    A Systematic Literature Review
  129. Liu Xiongfei, Li Qi, Wang Fang, Ma Guowei (2022-07)
    Systematic Approach for Printability Evaluation and Mechanical Property Optimization of Spray-Based 3D Printed Mortar
  130. Peralta Abadi Patricia, Smarsly Kay (2022-07)
    Requirements-Analysis of Additive Manufacturing for Concrete Printing:
    A Systematic Review
  131. Asakawa Tomoya, Nishiwaki Tomoya, Ohno Kazunori, Yokoyama Shigeru et al. (2022-06)
    Fundamental Study on Automated Inter-Layer Reinforcing System with Metal-Fiber-Insertion for 3D Concrete Printer
  132. Nefs Karsten, Overmeir Anne, Salet Theo, Suiker Akke et al. (2022-06)
    Consistency of Mechanical Properties of 3D Printed Strain-Hardening Cementitious Composites Within One Printing System
  133. Mohan Manu, Rahul Attupurathu, Tao Yaxin, Schutter Geert et al. (2022-06)
    Hydration Re-Initiation of Borated CSA Systems with a Two-Stage Mixing Process:
    An Application in Extrusion-Based Concrete 3D Printing
  134. Tinoco Matheus, Mendonça Érica, Fernandez Letízia, Caldas Lucas et al. (2022-04)
    Life Cycle Assessment and Environmental Sustainability of Cementitious Materials for 3D Concrete Printing:
    A Systematic Literature Review
  135. Huang Shuyi, Xu Weiguo, Li Yuqian (2022-04)
    The Impacts of Fabrication Systems on 3D Concrete Printing Building Forms
  136. Fuente Albert, Blanco Ana, Galeote Eduardo, Cavalaro Sergio (2022-04)
    Structural Fiber-Reinforced Cement-Based Composite Designed for Particle-Bed 3D Printing Systems:
    Case Study Parque De Castilla Footbridge in Madrid
  137. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2022-04)
    Effect of Processing on the Air-Void System of 3D Printed Concrete
  138. Meisel Nicholas, Watson Nathan, Bilén Sven, Duarte José et al. (2022-02)
    Design and System Considerations for Construction-Scale Concrete Additive Manufacturing in Remote Environments via Robotic-Arm-Deposition
  139. Kajzr Daniel, Břoušek Josef, Petr Tomas, Beran Leoš et al. (2021-12)
    New Design of PLC-Based Robotic Control System for Concrete Printing in Building Construction
  140. Rennen Philipp, Khader Noor, Hack Norman, Kloft Harald (2021-11)
    A Hybrid Additive Manufacturing Approach:
    Combining Additive Manufacturing and Green-State Concrete Milling to Create a Functionally Integrated Loadbearing Concrete Panel System
  141. Nassar Roz-Ud-Din, Soroushian Parviz, Balachandra Anagi, Nassar Shumayal et al. (2021-09)
    Evaluation of Refined Cement-Based Matrix Systems for Extrusion of Wood-Fiber Cement
  142. Ranaudo Francesco, Mele Tom, Block Philippe (2021-09)
    A Low-Carbon, Funicular Concrete Floor System:
    Design and Engineering of the HiLo Floor
  143. Aziz Saqib, Apellániz Diego, Weber Max, Getti Giovanni et al. (2021-08)
    Towards a Multifunctional 3DCP Slab System
  144. Nodehi Mehrab, Asiabanpour Bahram, Omer Liam, Ozbakkaloglu Togay (2021-08)
    Material-Characterization of Diversity Aggregated Cementitious Materials Produced with a Modular Lightweight Additive Manufacturing Extrusion-System
  145. Jamali Koosha, Kaushal Vinayak, Najafi Mohammad (2021-07)
    Evolution of Additive Manufacturing in Civil Infrastructure Systems:
    A Ten-Year Review
  146. Leite Gabriela, Fontana Marcele (2021-07)
    Additive Manufacturing and the Evolution of the Construction Industry:
    A Systematic Literature Review 2015-2021
  147. Rehman Atta, Kim Jung-Hoon (2021-07)
    3D Concrete Printing:
    A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
  148. Zhao Zhihui, Chen Mingxu, Xu Jiabin, Li Laibo et al. (2021-03)
    Mix-Design and Rheological Properties of Magnesium-Potassium-Phosphate Cement Composites Based on the 3D Printing-Extrusion-System
  149. Schuldt Steven, Jagoda Jeneé, Hoisington Andrew, Delorit Justin (2021-03)
    A Systematic Review and Analysis of the Viability of 3D Printed Construction in Remote Environments
  150. Suntharalingam Thadshajini, Gatheeshgar Perampalam, Upasiri Irindu, Poologanathan Keerthan et al. (2021-02)
    Numerical Study of Fire and Energy Performance of Innovative Lightweight 3D Printed Concrete Wall-Configurations in Modular Building System
  151. Pessoa Ana Sofia, Guimarães Ana, Lucas Sandra, Simões Nuno (2021-02)
    3D Printing in the Construction Industry:
    A Systematic Review of the Thermal Performance in Buildings
  152. Chen Yu, Çopuroğlu Oğuzhan, Rodríguez Claudia, Filho Fernando et al. (2021-02)
    Characterization of Air-Void Systems in 3D Printed Cementitious Materials Using Optical Image Scanning and X-Ray Computed Tomography
  153. Gomaa Mohamed, Jabi Wassim, Veliz-Reyes Alejandro, Soebarto Veronica (2021-01)
    3D Printing System for Earth-Based Construction:
    Case Study of Cob
  154. Weng Yiwei, Li Mingyang, Wong Teck, Tan Ming (2021-01)
    Synchronized Concrete and Bonding-Agent-Deposition-System for Inter-Layer Bond Strength Enhancement in 3D Concrete Printing
  155. Sepasgozar Samad, Shi Anqi, Yang Liming, Shirowzhan Sara et al. (2020-12)
    Additive Manufacturing Applications for Industry 4.0:
    A Systematic Critical Review
  156. Bester Frederick, Heever Marchant, Kruger Jacques, Zijl Gideon (2020-11)
    Reinforcing Digitally Fabricated Concrete:
    A Systems Approach Review
  157. Chung Jihoon, Lee Ghang, Kim Jung-Hoon (2020-10)
    A Systematic Review of the Geographic and Chronological Distributions of 3D Concrete Printers from 1997 to 2020
  158. Mohamed Shibly Maahir, Soto Borja (2020-10)
    Threat Modeling in Construction:
    An Example of a 3D Concrete Printing System
  159. Xiao Jianzhuang, Zou Shuai, Yu Ying, Wang Yu et al. (2020-09)
    3D Recycled Mortar Printing:
    System-Development, Process-Design, Material-Properties and On-Site-Printing
  160. Blaakmeer Jan, Lobo B. (2020-07)
    A Robust Mortar and Printing System
  161. Wang Yu, Li Shuaishuai, Qin Tian, Yu Ying et al. (2020-07)
    Concrete 3D Printing:
    System Development, Process Planning and Experimental Results
  162. Vukorep Ilija, Zimmermann Gregor, Sablotny Tino (2020-07)
    Robot-Controlled Fabrication of Sprayed Concrete Elements as a Cyber-Physical-System
  163. Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2020-07)
    Influence of Pumping-Extrusion on the Air-Void System of 3D Printed Concrete
  164. Lloret-Fritschi Ena, Wangler Timothy, Gebhard Lukas, Mata-Falcón Jaime et al. (2020-05)
    From Smart Dynamic Casting to a Growing Family of Digital Casting Systems
  165. Kontovourkis Odysseas, Phocas Marios, Tryfonos George, Georgiou Christos (2020-05)
    Multi-Axis 3D Printing of Material-Reduced Shell-Structures on a Reconfigurable Supporting-System Using Topology-Optimization Principles
  166. Albar Abdulrahman, Chougan Mehdi, Kheetan Mazen, Swash Mohammad et al. (2020-04)
    Effective Extrusion-Based 3D Printing System Design for Cementitious-Based Materials
  167. Craveiro Flávio, Nazarian Shadi, Bártolo Helena, Bartolo Paulo et al. (2020-02)
    An Automated System for 3D Printing Functionally Graded Concrete-Based Materials
  168. Verian Kho, Kowaleski Scott, Carli Matthew, Bright Randall et al. (2020-02)
    Properties of 3D Printing Mortar with the Development of a 3D Construction Printing Delivery System
  169. Wi Kwangwoo, Suresh Vignesh, Wang Kejin, Li Beiwen et al. (2019-12)
    Quantifying Quality of 3D Printed Clay Objects Using a 3D Structured Light Scanning System
  170. Nazarian Shadi, Duarte José, Bilén Sven, Memari Ali et al. (2019-11)
    Additive Manufacturing of Architectural Structures:
    An Interplay Between Materials, Systems, and Design
  171. Albar Abdulrahman, Swash Mohammad, Ghaffar Seyed (2019-10)
    The Design and Development of an Extrusion-System for 3D Printing Cementitious Materials
  172. Davila Delgado Juan, Oyedele Lukumon, Ajayi Anuoluwapo, Akanbi Lukman et al. (2019-07)
    Robotics and Automated Systems in Construction:
    Understanding Industry-Specific Challenges for Adoption
  173. Moreira Jr. Amarildo, Santos Francielle (2019-06)
    Automatization of the Constructive Process:
    A Systematic Study of the 3D Concrete Printing Technology (Contour Crafting)
  174. Fiske Michael, Edmunson Jennifer, Weite Edward, Fikes John et al. (2018-09)
    The Disruptive Technology That Is Additive Construction:
    System Development Lessons Learned for Terrestrial and Planetary Applications
  175. Scotto Fabio, Lloret-Fritschi Ena, Gramazio Fabio, Kohler Matthias et al. (2018-05)
    Adaptive Control-System for Smart Dynamic Casting:
    Defining Fabrication-Informed Design-Tools and Process-Parameters in Digital Fabrication-Processes
  176. Paul Suvash, Zijl Gideon, Tan Ming, Gibson Ian (2018-05)
    A Review of 3D Concrete Printing Systems and Materials Properties:
    Current Status and Future Research Prospects
  177. Duballet Romain, Baverel Olivier, Dirrenberger Justin (2017-08)
    Classification of Building Systems for Concrete 3D Printing
  178. Panda Biranchi, Lim Jian, Mohamed Nisar, Paul Suvash et al. (2017-07)
    Automation of Robotic Concrete Printing Using Feedback-Control-System
  179. Wolfs Robert, Bos Freek, Strien Emiel, Salet Theo (2017-06)
    A Real-Time Height Measurement and Feedback System for 3D Concrete Printing
  180. Gardiner James, Janssen Steven, Kirchner Nathan (2016-07)
    A Realization of a Construction-Scale Robotic System for 3D Printing of Complex Formwork
  181. Morel Philippe, Schwartz Thibault (2015-10)
    Automated Casting Systems for Spatial Concrete Lattices
  182. Ding Lieyun, Wei Ran, Che Haichao (2014-12)
    Development of a BIM-Based Automated Construction System
  183. Jeon Kwang-Hyun, Park Min-Beom, Kang Min-Kyung, Kim Jung-Hoon (2013-11)
    Development of an Automated Freeform Construction System and Its Construction Materials
  184. Howe Scott, Wilcox Brian, McQuin Christopher, Townsend Julie et al. (2013-09)
    Faxing Structures to the Moon:
    Freeform Additive Construction System (FACS)
  185. Bosscher Paul, Williams Robert, Bryson L., Castro-Lacouture Daniel (2007-04)
    Cable-Suspended Robotic Contour Crafting System