Skip to content

#strategy

Keywords by Co - Occurrence

  1. Zhu Binrong, Qi Miao, Chen Wei, Pan Jinlong (2025-12)
    Anisotropic Mechanical Properties of 3D Printed Low-Carbon Concrete and Connection Strategies for Large-Scale Reusable Formwork in Digital Construction
  2. Deng North, Wang Sizhe, Li Mingyang, Wang Xiangyu et al. (2025-12)
    A Perforated Strip-Based Three-Dimensional Reinforcement Strategy for 3D Printed Concrete:
    Flexural Testing of Beams as a Proof of Concept
  3. Sun Yuhang, Yang Xiaojie, Liu Xiongfei, Ma Guowei et al. (2025-12)
    Coordinated Spray-Based 3D Printing of Reinforced Concrete Structure:
    A Multi-Angle Strategy for Blockage Mitigation
  4. Li Chenglin, Jiao Y., Ren Kai, Liu N. et al. (2025-11)
    A Novel Pivot-Move Strategy for Dual-Robot Manipulator Additive Manufacturing:
    Enabling Collision Avoidance Without Halting Deposition
  5. Changez Kashif, Aslam Jawad, Bhutta Muhammad, Butt Shahid (2025-11)
    Hybrid Additive Strategies for Sustainable 3D Concrete Printing:
    Balancing Printability, Early-Stage Strength, and Eco-Efficiency
  6. Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2025-10)
    Dual Strategies for Enhancing Carbonation Curing in 3D Printing Steel Slag Mortars:
    Material Modification and Curing Process Innovation
  7. Chan Li-Jing, Padil Khairul, Chin Chee-Long, Ibrahim Izni et al. (2025-09)
    Strategies to Enhance Interlayer Bonding in 3D Printed Concrete:
    A Review
  8. Tian Xin, Shi Anqi, Fang Zhi, Lin Alexander (2025-09)
    Multi-Interface Effects on Mechanical Behavior in 3D-Printed Concrete Shear Keys:
    A Finite Element Modeling Strategy
  9. Mousavi Moein, Rangaraju Prasad (2025-09)
    Freeze-Thaw Durability of 3D Printed Concrete:
    A Comprehensive Review of Mechanisms, Materials, and Testing Strategies
  10. Murtaza Ghulam, Baldinelli Giorgio (2025-08)
    Revolutionizing Architecture:
    3D Printing in Large Construction Industry and Strategic Innovations for Enhanced Performance
  11. Jalil Siti Nur Natasha Abdul, Rizal Alias Ahmad, Alias Aizat (2025-06)
    Challenges and Strategies in Implementing 3D Concrete Printing (3DCP) Technology in Malaysia:
    Materials and Design Codes
  12. Li Long, Ji Weiyi, Xiao Jianzhuang, Xiao Jie et al. (2025-06)
    Strategy for Improving Buildability of 3D Printing Concrete Using CO2 Mixing and Chemical Admixtures
  13. Trung Hieu Nguyen, Minh Trieu Nguyen, Dang Tri, Thinh Nguyen (2025-05)
    Advanced Sliding Mode Control Strategy for High-Performance 3D Concrete Printing
  14. Dabbaghisouraki Farshad, Tanhadoust Amin, Nehdi Moncef (2025-04)
    Fiber Reinforcement Strategies in 3D Concrete Printing:
    Addressing Challenges and Identifying Research Gaps
  15. Ali Shah Syed, Zhang Shipeng, Xuan Dongxing, Poon Chi (2025-04)
    Development of a Novel Mixing Strategy for Set-on-Demand Printing of One-Part Geopolymer Using Municipal Solid Waste Incineration Bottom Ash and Blast Furnace Slag
  16. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2025-04)
    Novel Strategy for Enhancing Rheological Properties and Interlayer Bonding in Underwater 3D Concrete Printing
  17. Kloft Harald, Hack Norman, Sawicki Bartłomiej, Dörrie Robin et al. (2025-03)
    Digital Fabrication Strategies for Sustainability
  18. Gulati Hemant, Lu Tianxing (2025-03)
    Customized 3D Printable Concrete:
    A Systematic Review of Challenges, Methodologies, and Adoption Strategies
  19. Zhou Wen, Xu Yading, Meng Zhaozheng, Xie Jinbao et al. (2025-03)
    Filament Stitching:
    An Architected Printing Strategy to Mitigate Anisotropy in 3D-Printed Engineered Cementitious Composites
  20. Yuan Yong, Sheng Ruyi, Yao Xupeng, Pichler Bernhard et al. (2025-03)
    A Three-Step Development Strategy for 3D Printable Concrete Containing Coarse Aggregates
  21. Albrecht Sophie, Hellerbrand Stefan, Weininger Florian, Thiel Charlotte (2025-02)
    Strategies for Minimizing Environmental Impact in Construction:
    A Case Study of a Cementitious 3D Printed Lost Formwork for a Staircase
  22. Richter Christiane, Maurer Christian, Jungwirth Jörg (2025-01)
    Reinforcement-Strategies for Additively Manufactured Concrete Elements:
    Exploring the Potential of Different Reinforcement-Materials for Selective Cement-Activation
  23. Tinoco Matheus, Cavalcante Tiago, Andrade Luiza, Araújo Olga et al. (2025-01)
    Mix-Design-Strategies for 3D Printable Bio-Based Cementitious Composites Using Rice-Husk-Particles as Multifunctional Aggregates
  24. Kopitha Kirushnapillai, Rajeev Pathmanathan, Sanjayan Jay, Elakneswaran Yogarajah (2024-12)
    CO2 Sequestration and Low-Carbon-Strategies in 3D Printed Concrete
  25. Li Shuai, Khieu Hai, Black Jay, Nguyen Hung-Xuan et al. (2024-12)
    Two-Scale 3D Printed Steel-Fiber-Reinforcements-Strategy for Concrete Structures
  26. Habibi Alireza, Buswell Richard, Osmani Mohamed, Aziminezhad Mohamadmahdi (2024-11)
    Sustainability Principles in 3D Concrete Printing:
    Analysing Trends, Classifying Strategies, and Future Directions
  27. Anton Ana-Maria, Skevaki Eleni, Bischof Patrick, Reiter Lex et al. (2024-11)
    Column-Slab Interfaces for 3D Concrete Printing:
    Design, Fabrication and Assembly Strategies
  28. Placzek Gerrit, Schwerdtner Patrick (2024-10)
    A Global Snapshot of 3D Printed Buildings:
    Uncovering Robotic-Oriented Fabrication-Strategies
  29. Kamhawi Abdallah, Meibodi Mania (2024-09)
    Techniques and Strategies in Extrusion-Based 3D Concrete Printing of Complex Components to Prevent Premature Failure
  30. Cao Jing, Shengzhao E., Yang Yi, Shi Yaming et al. (2024-09)
    A Strategy for the Improvement of the Bonding Performance of 3D Printed Concrete Inter-Layer Interfaces
  31. Dey Dhrutiman, Panda Biranchi (2024-09)
    Numerical Evaluation of Thermal Performance and Improvement-Strategies for 3D Printed Concrete Structures
  32. Bono Victor, Ducoulombier Nicolas, Mesnil Romain, Caron Jean-François (2024-09)
    Tailored Low-Carbon Footprint Cementitious Material for 3D Printing:
    Strategies for Rheology Adjustment and Mechanical Performance Estimation
  33. Wolf Alexander, Bauer Simon, Knaack Ulrich (2024-09)
    Green Klinkers:
    A Strategy to Include Plants in Double-Shell Masonry
  34. Jacquet Yohan, Perrot Arnaud (2024-09)
    Hygroscopic Insulation of Open Matrix Core Wall System as a Strategy to Enhance Buildability of 3D Printed Earth-Based Materials Structures
  35. Gümrük Idil, Wolfs Robert, Schröder Torsten, Salet Theo (2024-09)
    Circular Design-Strategies for 3D Concrete Printing in the Built Environment
  36. Chaudhari Ojas, Johansson Jan, Haage Mathias, Sjölander Andreas et al. (2024-09)
    3D Printing-Strategy and Implementation for Concrete Prefabrication Industry in Sweden
  37. Hanifa Mohamad, Figueiredo Bruno, Mahdy Deena, Mendonça Paulo et al. (2024-08)
    Continuum Optimization of 3D Printed Self-Supported Shell:
    Hybrid Strategy for Crafting Ribbed System
  38. Jia Lutao, Niu Geng, Dong Enlai, Jiang Yifan et al. (2024-08)
    Optimization-Strategy for Incorporating Recycled Brick-Powder in 3D Printed Concrete by Balancing Low-Carbon Footprint and Enhanced Performance
  39. Shao Lijing, Liu Zhaolong, Liu Qi, Wang Haochuan et al. (2024-07)
    A New Strategy to Enhance 3D Printability of Cement-Based Materials:
    In-Situ Polymerization
  40. Skibicki Szymon, Federowicz Karol, Hoffmann Marcin, Chougan Mehdi et al. (2024-05)
    Potential of Reusing 3D Printed Concrete (3DPC) Fine Recycled Aggregates as a Strategy Towards Decreasing Cement Content in 3DPC
  41. Wangler Timothy, Vangen Kathrina, Burger Joris, Flatt Robert (2024-05)
    Digital Fabrication Material-Processing-Strategy for Bespoke Low-Clinker Mass-Concrete Components
  42. Zuo Zibo, Corte Wouter, Huang Yulin, Chen Xiaoming et al. (2024-05)
    Strategies Towards Large-Scale 3D Printing Without Size-Constraints
  43. Hitzegrad Jan, Brohmann Leon, Herding Friedrich, Pfennings Kai et al. (2024-04)
    Surfaces of Coastal Biogenic Structures:
    Exploiting Advanced Digital Design and Fabrication-Strategies for the Manufacturing of Oyste-Reef- and Mussel-Bed-Surrogates
  44. Cutajar Sacha, Dielemans Gido, Krakovská Ema, Dorresteijn Evelien et al. (2024-04)
    Up-Scaling Earth Formworks:
    3D Printing-Strategies for Material-Optimized Reinforced Concrete Structures
  45. Chadha Kunaljit, Vasey Lauren, Kango Ananya, Aejmelaeus-Lindström Johan et al. (2024-04)
    Impact Printed Structures:
    Design Systems and Construction Strategies
  46. Alhaidary Haidar (2024-03)
    Three-Dimensional Concrete Printing as a Construction-Automation-Strategy and Assessments from a Case Study Building
  47. Curbach Manfred, Hegger Josef, Bielak Jan, Schmidt Christopher et al. (2023-10)
    New Perspectives on Carbon Reinforced Concrete Structures:
    Why New Composites Need New Design-Strategies
  48. Fleckenstein Julia, Bertagna Federico, Piccioni Valeria, Fechner Mareen et al. (2023-09)
    Revisiting Breuer Through Additive Manufacturing:
    Passive Solar-Control-Design-Strategies for Bespoke Concrete Building Envelope Elements
  49. Wolf Alexander, Carvalho João, Figueiredo Bruno, Cruz Paulo et al. (2023-09)
    Support-Strategies for Robocasting Ceramic Building Components
  50. Meng Qingcheng, Hu Lei, Li Mingjian, Qi Xin (2023-09)
    Assessing the Environmental Impact of Building Life Cycle:
    A Carbon-Reduction-Strategy Through Innovative Design, Intelligent Construction, and Secondary Utilization
  51. Placzek Gerrit, Schwerdtner Patrick (2023-07)
    Concrete Additive Manufacturing in Construction:
    Integration Based on Component-Related Fabrication-Strategies
  52. Pressmair Nadine, Kromoser Benjamin (2023-06)
    Development-Stages of Structurally Optimized Concrete Girders:
    Design-Concepts, Material-Strategies and Experimental Investigation
  53. Haar Bjorn, Kruger Jacques, Zijl Gideon (2023-06)
    A System-Development-Strategy of a Digital Construction for Building Frames
  54. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2023-03)
    Twin-Pipe Pumping-Strategy for Stiffening-Control of 3D Printable Concrete:
    From Transportation to Fabrication
  55. Abbaoui Khalid, Korachi Issam, Mollah Md., Spangenberg Jon (2022-11)
    CFD Modelling of Mortar-Extrusion and Path-Planning-Strategy at the Corner for 3D Concrete Printing
  56. Ahmed Ghafur, Askandar Nasih, Jumaa Ghazi (2022-07)
    A Review of Large-Scale 3DCP:
    Material-Characteristics, Mix-Design, Printing-Process, and Reinforcement-Strategies
  57. Favier Aurélie, Petit Agnès (2022-06)
    Strategies for Reducing the Environmental Footprint of Additive Manufacturing via Sprayed Concrete
  58. Xiao Yinan, Hack Norman, Kloft Harald (2022-06)
    Digital Structural Design and Shotcrete 3D Printing-Strategies for Lightweight Reinforced Concrete Beam-Grid Structures
  59. Danish Aamar, Khurshid Kiran, Mosaberpanah Mohammad, Ozbakkaloglu Togay et al. (2022-06)
    Micro-Structural Characterization, Driving Mechanisms, and Improvement-Strategies for Inter-Layer Bond Strength of Additive Manufactured Cementitious Composites:
    A Review
  60. Zhang Chao, Jia Zijian, Wang Xianggang, Jia Lutao et al. (2022-05)
    A Two-Phase Design-Strategy Based on the Composite of Mortar and Coarse Aggregate for 3D Printable Concrete with Coarse Aggregate
  61. Won Daeyoun, Hwang Bon-Gang, Chi Seokho, Kor Ju (2022-05)
    Adoption of Three-Dimensional Printing Technology in Public Housing in Singapore:
    Drivers, Challenges, and Strategies
  62. Gebhard Lukas, Burger Joris, Mata-Falcón Jaime, Lloret-Fritschi Ena et al. (2022-03)
    Towards Efficient Concrete Structures with Ultra-Thin 3D Printed Formwork:
    Exploring Reinforcement-Strategies and Optimization
  63. Wu Zhengyu, Memari Ali, Duarte José (2022-01)
    State of the Art Review of Reinforcement-Strategies and Technologies for 3D Printing of Concrete
  64. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-12)
    Numerical Modelling-Strategies for Reinforced 3D Concrete Printed Elements
  65. Chen Yu, He Shan, Gan Yidong, Çopuroğlu Oğuzhan et al. (2021-11)
    A Review of Printing-Strategies, Sustainable Cementitious Materials and Characterization Methods in the Context of Extrusion-Based 3D Concrete Printing
  66. Ledderose Lukas, Baghdadi Abtin, Kloft Harald (2021-11)
    Magnetic Alignment of Microsteel-Fibers as Strategy for Reinforcing UHPFRC
  67. Ivaniuk Egor, Müller Steffen, Neef Tobias, Mechtcherine Viktor (2021-11)
    Strategies for Integrating Reinforcement Into 3D Concrete Printing at the TU Dresden
  68. Anton Ana-Maria, Reiter Lex, Skevaki Eleni (2021-11)
    Strategies for Integrating Straight Rebar in 3DCP Columns and Shear Walls
  69. Gantner Stefan, Rothe Tom, Hühne Christian, Hack Norman (2021-11)
    Reinforcement-Strategies for Additive Manufacturing in Construction Based on Dynamic Fiber Winding:
    Concepts and Initial Case Studies
  70. Tao Yaxin, Rahul Attupurathu, Lesage Karel, Tittelboom Kim et al. (2021-11)
    Mechanical and Microstructural Properties of 3D Printable Concrete in the Context of the Twin-Pipe Pumping-Strategy
  71. Villacrés Juan, Guamán-Rivera Robert, Menéndez Oswaldo, Cheein Fernando (2021-10)
    3D Printing Deformation Estimation Using Artificial Vision-Strategies for Smart-Construction
  72. Farahbakhsh Mehdi, Borhani Alireza, Kalantar Negar, Rybkowski Zofia (2021-07)
    PRINT in PRINT:
    A Nested Robotic Fabrication-Strategy for 3D Printing Dissolvable Formwork of a Stackable Column
  73. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2021-04)
    Structural Behavior of 3D Printed Concrete Beams with Various Reinforcement-Strategies
  74. Archez Julien, Maitenaz Sébastien, Demont Léo, Charrier Malo et al. (2021-02)
    Strategy to Shape, on a Half-Meter Scale, a Geopolymer Composite Structure by Additive Manufacturing
  75. Meurer Maximilian, Claßen Martin (2021-02)
    Mechanical Properties of Hardened 3D Printed Concretes and Mortars:
    Development of a Consistent Experimental Characterization-Strategy
  76. Ooms Ticho, Vantyghem Gieljan, Coile Ruben, Corte Wouter (2020-12)
    A Parametric Modelling-Strategy for the Numerical Simulation of 3D Concrete Printing with Complex Geometries
  77. Kloft Harald, Empelmann Martin, Hack Norman, Herrmann Eric et al. (2020-09)
    Reinforcement-Strategies for 3D Concrete Printing
  78. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2020-08)
    Experimental Investigation of Reinforcement-Strategies for Concrete-Extrusion 3D Printed Beams
  79. Carneau Paul, Mesnil Romain, Ducoulombier Nicolas, Roussel Nicolas et al. (2020-07)
    Characterisation of the Layer-Pressing-Strategy for Concrete 3D Printing
  80. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Burger Joris et al. (2020-07)
    Aligned Inter-Layer Fiber-Reinforcement and Post-Tensioning as a Reinforcement-Strategy for Digital Fabrication
  81. Kloft Harald, Empelmann Martin, Hack Norman, Herrmann Eric et al. (2020-07)
    Strategies for the Reinforcement for 3D-Concrete-Printing
  82. Shahsavari Rouzbeh, Hwang Sung (2020-03)
    Bio-Iinspired Cementitious Materials:
    Main Strategies, Progress, and Applications
  83. Meng Xiangcheng, Zhang Xueqing (2019-07)
    Case-Study-Analysis for Development-Strategies of Construction 3D Printing
  84. Krause Martin, Otto Jens, Bulgakov Alexey, Sayfeddine Daher (2015-07)
    Strategic Optimization of 3D Concrete Printing Using the Method of CONPrint3D®
  85. Thangavelu Madhu, Khoshnevis Behrokh, Carlson Anders, Leach Neil (2012-09)
    Architectural Concepts Employing Co-Robot-Strategy and Contour Crafting Technologies for Lunar Settlement Infrastructure Development