#element¶

Keywords by Co - Occurrence¶

#concrete (128) #print (120) #finite (33) #additive (26) #reinforcement (26)

1. Rizzieri Giacomo, Bos Derk, Wolfs Robert, Ferrara Liberato et al. (2026-04)
   A Unified Fluid-Solid Elasto-Viscoplastic Finite Element Model for the Simulation of 3D Concrete Printing Across Process Scales
2. Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2026-04)
   High-Fidelity Finite Element Modelling of Multi-Layer 3D Printing with Complex Toolpaths
3. Warsi Syed, Panda Biranchi, Biswas Pankaj (2026-04)
   3D Finite Element Analysis on the Effects of Boundary Elements Confinement on Cyclic Performance of 3D Printed Concrete Wall
4. Rojas Omar, Nakamatsu Javier, Aguilar Rafael, Ñañez Robert et al. (2026-03)
   Improved Resistance to Water Erosion and Self-Healing Capacity of Earthen-Based 3D Printed Elements Using Enzyme-Induced Carbonate Precipitation (EICP)
5. Kumar S., Kumar L., Muthu Nelson, Panda Biranchi (2026-03)
   Toward Efficient Simulation of Cracked 3D-Printed Concrete Beams:
   Analytical and Homogenized Finite Element Approach
6. Liu Jiaxu, Zhang Nan, Xie Xiangyu, Sanjayan Jay et al. (2026-02)
   Orientation and Spatial Distribution of Pores and Fibers in Concrete Elements Produced by Extrusion-Based 3D Printing
7. Tripathi Avinaya, Maurya Ashutosh, Rajan Subramaniam, Neithalath Narayanan (2026-02)
   Finite-Element Modeling Framework for Mechanical Response of 3D-Printed Concrete:
   Elucidating Directional, Interface, and Fiber Effects
8. Zhang Xiaoyue, Chen Zhengren, Zhou Xinting, Li Zheng et al. (2026-02)
   Experimental and Finite Element Studies of 3D-Printed Concrete-Glued Laminated Timber Composite Beams
9. Giulivo Gianluca, Menna Costantino (2026-02)
   The Role of Interlayer Interfaces in 3D-Printed Elements:
   A Nonlinear FEM-Based Study
10. García-Alvarado Rodrigo, Muñoz-Sanguinetti Claudia, Ulloa-Aguayo Paula, Rocha-Rubilar Aracely et al. (2026-02)
    Development of a Residential Prototype Using 3D-Printed Elements
11. An Dong, Zhu Zhi, Rahman Mahfuzur, Zhang Y. et al. (2026-01)
    Process-Informed Smooth Particle Hydrodynamics-Finite Element (SPH-FE) Simulation of 3D Concrete Printing:
    From Flow Behaviour to Structural Failure
12. Mirmotalebi Seyedali, Moon Hyosoo, Tesiero Raymond, Noor Sadia (2026-01)
    Defect Detection and Quality Control in 3D-Printed Construction Elements Using High-Resolution 3D Scanning and Deep Learning Models
13. Ding Tao, Lian Hongqian (2026-01)
    Buildability Analysis of 3D Concrete Printing:
    A Finite Element Model Incorporating Segment-by-Segment Activation, Nozzle Constraint, and Extrusion Pressure
14. Jesus Manuel, Lopes Joana, Teixeira João, Guimarães Ana et al. (2026-01)
    Application of Self-Cleaning Products on 3D-Printed Building Elements:
    An Experimental Study
15. Shaik Khaja, Perumalla Mallikarjun, Boilla Charan (2025-12)
    Topology Optimization with Experimental-Numerical Investigation of 3D-Printed Concrete Elements
16. Wang Jinjin, Li Shouzhen, Qiu Jin, Chen Cheng et al. (2025-12)
    Experimental Investigation on Thermal Performance of 3D Printed Concrete Elements Subjected to Radiant Heating
17. Dörrie Robin, Megnet Manuel, David Martin, Dröder Klaus et al. (2025-12)
    Integration of Discrete Reinforcement Elements for Shotcrete 3D Printing of Complex Structures
18. Telichko Victor, Slavcheva Galina, Levchenko Artem (2025-12)
    Experimentally Verified FE Model of Bending Reinforced 3D-Printed Concrete Elements
19. Wang Zherui, Teitelbaum E., Akbarzadeh Masoud, Aviv D. (2025-11)
    Experimental Assessment on Thermal Mass Performance of Structurally Optimized, 3D-Printed Concrete Floor Element for Carbon Emission Reduction
20. Vargas José, Breseghello Luca, Silfwerbrand Johan (2025-11)
    Circular Hybrid Façades:
    Responsive Design of Thermally Efficient 3D Printed Concrete Skins on Reused Concrete Elements
21. Yavartanoo Fahimeh, Bolhassani Damon, Akbarzadeh Masoud, Ororbia Maximilian et al. (2025-10)
    Advanced Finite Element Modeling of 3D-Printed Post-Tensioned Concrete Beams with Experimental Validation
22. Haripan Vislavath, Senthilnathan Shanmugaraj, Santhanam Manu, Raphael Benny (2025-10)
    Printability Assessment of Concrete 3D Printed Elements with Recycled Fine Aggregate
23. Kul Anil, Kocaer Öznur (2025-10)
    Parametric Analysis of Design and Operational Parameters in 3D Concrete Printing of Wall Elements
24. Pal Abhipsa, Wan-Wendner Lin (2025-10)
    3D Concrete Printing and Infill Patterns of Energy Efficient Structural Wall Elements
25. Apsari Auliagitta, Tambusay Asdam, Suprobo Priyo, Suryanto Benny (2025-10)
    Influence of Printing Speed and Nozzle Size on Buildability of 3D Printed Concrete Walls:
    A Nonlinear Finite Element Study
26. Ma Wei, Chen Junjie, Dai Yuntong, Zhou Yaya et al. (2025-10)
    Mechanical Properties of 3D Printed Concrete Irregular Structural Formwork:
    Experimental Study and Finite Element Analysis
27. Tian Xin, Shi Anqi, Fang Zhi, Lin Alexander (2025-09)
    Multi-Interface Effects on Mechanical Behavior in 3D-Printed Concrete Shear Keys:
    A Finite Element Modeling Strategy
28. Baritakis Mario, Traine Phillip, Granzow Jan, Döbert Christine (2025-08)
    3D-Printed Clay Formwork for Topology:
    Optimized Concrete Elements
29. İlerisoy Zeynep, Takva Çağatay, Top Semahat, Gökgöz Berru et al. (2025-08)
    The Effectiveness of 3D Concrete Printing Technology in Architectural Design:
    Different Corner-Wall Combinations in 3D Printed Elements and Geometric Form Configurations in Residential Buildings
30. Rizzieri Giacomo, Meni Simone, Cremonesi Massimiliano, Ferrara Liberato (2025-07)
    A Particle Finite Element Method for Investigating the Influence of Material and Process Parameters in 3D Concrete Printing
31. Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-06)
    A Systematic Literature Review on the Thermal Behaviour of Building Elements Constructed Through 3D Concrete Printing (3DCP)
32. Cisowski Adam, Kowalik Michał (2025-06)
    The Influence of the Cross-Sectional Geometry on Stress Concentration in 3D Printed Concrete Elements:
    A Preliminary Study
33. Chen Qinbin, Barbat Gabriel, Cervera Miguel (2025-06)
    Finite Element Buildability Analysis of 3D Printed Concrete Including Failure by Elastic Buckling and Plastic Flow
34. Gantner Stefan, Rennen Philipp, Amiri Fatemeh, Rothe Tom et al. (2025-05)
    Robotic Frame Winding:
    Prefabricated Fiber Structures as Formwork and Reinforcement for Digitally Fabricated Shell-Like Concrete Elements
35. Dörrie Robin, Gantner Stefan, Amiri Fatemeh, Lachmayer Lukas et al. (2025-04)
    From Digital to Real:
    Optimised and Functionally Integrated Shotcrete 3D Printing Elements for Multi-Storey Structures
36. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wong Teck et al. (2025-03)
    Investigate Mechanisms of Different Printing Parameters on the Mechanical Anisotropy of 3D Concrete Printing Elements by Using Computed Tomography Scan and Computational Fluid Dynamics Methods
37. Ur Rehman Bajwa Asad, Samarasinghe Don, Flemmer Claire, Bao Ding (2025-03)
    Systematic Literature Review of the Evaluation of the Thermal Conductivity of 3D Concrete Printed Building Elements
38. Senthilnathan Shanmugaraj, Raphael Benny (2025-02)
    Predicting Buildability Using the Surface Texture of 3D Printed Concrete Elements
39. Dong Enlai, Yuan Hanquan, Chen Yu, Jia Lutao et al. (2025-01)
    Printing Large-Size Eggshell-Shaped Elements with Ultra-High-Performance Concrete:
    From Material-Design to Structural Bearing-Capacity-Assessment
40. Richter Christiane, Maurer Christian, Jungwirth Jörg (2025-01)
    Reinforcement-Strategies for Additively Manufactured Concrete Elements:
    Exploring the Potential of Different Reinforcement-Materials for Selective Cement-Activation
41. Kumar Lalit, Dey Dhrutiman, Panda Biranchi, Muthu Nelson (2024-12)
    Influence of the Nozzle Geometry on Mechanical Properties of 3D Printed Concrete:
    Experiment and Finite Element Study
42. Bahoria Boskey, Bhagat Rajesh, Pande Prashant, Raut Jayant et al. (2024-12)
    Design-Optimization of 3D Printed Concrete Elements Considering Life Cycle Assessment and Life Cycle Costing
43. Neef Tobias, Kalthoff Matthias, Müller Steffen, Cruz Cynthia et al. (2024-12)
    Mineral-Impregnated Carbon-Fibers-Reinforcement for Concrete Elements Manufactured by Extrusion
44. Li Fangyuan, Hu Xiangcheng, Shahzad Qamar (2024-12)
    Anisotropic Behavior in 3D Printed Concrete:
    Finite Element Simulation Approach
45. Avancini Victor, Quintana-Ruiz Osvaldo, Campello Eduardo (2024-12)
    Assessing 3D Printed Concrete Process Parameters Through Discrete Element Modeling
46. Curth Alexander, Alvarez Eduardo, Sass Lawrence, Norford Leslie et al. (2024-11)
    Additive Energy:
    3D Printing Thermally Performative Building Elements with Low-Carbon Earthen Materials
47. He Yuxiang, Robens-Radermacher Annika, Noda Sakiko, Wolf Christoph et al. (2024-11)
    Automated Workflows for Concrete Additive Manufacturing for Design, Optimization, and Fabrication of Parametrized Elements
48. Sreenivas Gagan, Rizzieri Giacomo, Bhattacherjee Shantanu, Jain Smrati et al. (2024-11)
    Experimental and Numerical Assessment of Layer Deformation in a 3D Printed Concrete Element
49. Lindner Marco, Gliniorz Ralf, Funke Henrik, Männel Mike et al. (2024-10)
    Tool-Development for Pre-Cast Concrete Elements in Robot-Assisted Flow-Production
50. Abstoß Marvin, Funke Henrik, Gelbrich Sandra (2024-10)
    Sustainable Production of Complex Precast Concrete Elements Without Demolding Drafts Using Concrete Extrusion and Processing
51. Markin Slava, Cordova Julian, Combrinck Riaan, Mechtcherine Viktor (2024-09)
    Deformation Behavior of 3D Printed Concrete Elements Induced by Plastic Shrinkage
52. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2024-09)
    Additive Flow Production of Lightweight Precision Concrete Elements
53. Yoshihara Rei, Hashimoto Katsufumi, Sugiyama Takafumi, Nakase Kota (2024-09)
    Development and Validation of Finite-Element-Constitutive-Model for Meso-Scale Compressive Fracture Behavior of 3D Printed Mortar
54. Osta Mohammad, Mukhtar Faisal (2024-09)
    Buildability-Analysis of 3D Concrete Printing Using Finite-Element-Method
55. Abstoß Marvin, Funke Henrik, Gelbrich Sandra (2024-09)
    Production of High-Precision Formwork Elements Using Parametrically Programmed Concrete-Extrusion and Machining
56. Kromoser Benjamin, Gappmeier Peter, Ahmed Iyad, Reichenbach Sara (2024-09)
    A New Approach for Automated Design and Robot-Assisted Production of Structurally Optimised Reusable Concrete Building Elements
57. Mechtcherine Viktor, Taubert Markus, Müller Steffen, Butler Marko et al. (2024-09)
    Integration of Steel Reinforcement into Extrusion-Based 3D Concrete Printing of Monolithic Concrete Elements
58. Rudolph Enrico, Schönfelder Daniel, Funke Henrik, Gelbrich Sandra (2024-09)
    Efficient Production of Reinforced Pre-Cast Concrete Elements Using Additive Manufactured, Integrated Formwork
59. Vargas José, Dervishaj Arlind (2024-09)
    Embedding NFC Tags into 3DCP Elements
60. Hlaváček Petr, Wolf Christoph, Robens-Radermacher Annika, Kühne Hans-Carsten (2024-09)
    Powder-Bed 3D Printing of Cementitious Materials for Lightweight Construction Elements
61. Anjos Marcos, Maia José, Souza Dias Leonardo, Medeiros Fernanda et al. (2024-09)
    Effect of the Geometry of Representative Volumetric Masonry Elements:
    Experimental and Numerical Analysis
62. Dörrie Robin, David Martin, Freund Niklas, Lowke Dirk et al. (2024-09)
    Surface Processing of Shotcrete 3D Printed Concrete Elements Using a Rotating Trowel Disc:
    Influence of Timing on Resulting Surface Quality
63. Baz Bilal, Nana W., Mothe Loïc, Florentin Jérôme et al. (2024-09)
    Structural Behavior of 3D Printed Load Bearing Elements
64. Mitrović Stefan, Ignjatović Ivan (2024-08)
    Connections Between Single Elements Made by 3D Printed Concrete
65. Tittelboom Kim, Mohan Dhanesh, Šavija Branko, Keita Emmanuel et al. (2024-08)
    On the Micro-and Meso-Structure and Durability of 3D Printed Concrete Elements
66. Rennen Philipp, Gantner Stefan, Rothe Tom, Baz Bilal et al. (2024-08)
    Structural Evaluation of Shotcrete 3D Printing and Robotic Fiber Winding for Thin-Shell Elements
67. Dahlenburg Maximilian, Tan Yuan, Li Mengxue, Ajmal Moshin et al. (2024-08)
    A Flexible and Efficient Calibration Method for Discrete Element Simulations of Additive Manufacturing in Construction
68. Giwa Ilerioluwa, Kazemian Ali, Gopu Vijaya, Rupnow Tyson (2024-07)
    A Compressive Load-Bearing-Analysis of 3D Printed Circular Elements
69. Markin Slava, Combrinck Riaan, Mechtcherine Viktor (2024-07)
    Specifics of Plastic Shrinkage in 3D Printed Concrete Elements
70. Zhi Peng, Wu Yuching, Bai Meiyan (2024-06)
    Determining the Effect of Geometric and Dynamic Properties of Screws on Fiber-Orientation During FRC 3D Printing Based on Discrete Element Simulation
71. Senthilnathan Shanmugaraj, Raphael Benny (2024-06)
    Buildability-Assessment of 3D Printed Concrete Elements Through Computer-Vision
72. Yang Yekai, Lu Pengyuan, Liu Zhongxian, Dong Liang et al. (2024-04)
    Effect of Steel-Fiber with Different Orientations on Mechanical Properties of 3D Printed Steel-Fiber-Reinforced Concrete:
    Meso-Scale Finite-Element-Analysis
73. Fleckenstein Julia, Knychalla Bruno, Briels David, Baghdadi Abtin et al. (2024-04)
    BREUER × AM:
    Functional Hybridisation in Concrete Building Envelope Elements through Additive Manufacturing
74. Skibicki Szymon, Szewczyk Piotr, Majewska Julia, Sibera Daniel et al. (2024-03)
    The Effect of Inter-Layer Adhesion on Stress-Distribution in 3D Printed Beam Elements
75. Nóbrega Anna, Queiroz Junior Cleanto, Souza Wendell, Cabral Kleber et al. (2024-02)
    Computational Modeling for Structural Element Analysis Using Cement Composites in 3D Printing
76. Nguyen Vuong, Tran Jonathan, Liu Junli, Tran Mien et al. (2024-02)
    Extended Finite Element Multi-Scale Modelling for Crack Propagation in 3D Printed Fiber-Reinforced Concrete
77. Ruitinga Volker, Avramiea Emma (2023-12)
    Custom-Made Print-Heads Empowering 3D Printed Concrete:
    Innovations in Digital Design and Fabrication of Complex Prefabricated Elements
78. Suthar Mahendrabhai, Shariff Najeeb, Nanthagopalan Prakash (2023-12)
    Performance-Assessment of Topologically Optimised 3D Printable Concrete Sewer Cross-Section Using Finite Element Simulation
79. Gelbrich Sandra, Abstoß Marvin, Rudolph Enrico, Funke Henrik (2023-12)
    Complex Concrete Elements for the Production of Recyclable Formwork by Extrusion and Milling
80. Straßer Alexander, Kränkel Thomas, Gehlen Christoph (2023-12)
    Integrating Wire Arc Additive Manufacturing into Selective Paste-Intrusion for Reinforced Concrete Elements:
    Effect of Temperature on the Mechanical Performance
81. Coward Andy, Sørensen Jesper (2023-12)
    3D Printed Concrete Beams as Optimised Load Carrying Structural Elements:
    The Minimass Beam
82. Funke Henrik, Lindner Marco, Rudolph Enrico, Gelbrich Sandra (2023-12)
    Additive Manufacturing Technology for the Continuous Production of Precision Concrete Elements
83. Bedarf Patrick, Szabó Anna, Zanini Michele, Dillenburger Benjamin (2023-11)
    Robotic 3D Printing of Geopolymer Foam for Lightweight and Insulating Building Elements
84. Bosbach Sven, Kalthoff Matthias, Cruz Cynthia, Adam Viviane et al. (2023-11)
    Digital Prefabrication of Lightweight Building Elements for Circular Economy:
    Material-Minimised Ribbed Floor Slabs Made of Extruded Carbon Reinforced Concrete (ExCRC)
85. Dimitriou Savvas, Kontovourkis Odysseas (2023-11)
    Force-Flow Based 3D Printing of Structural Elements Inspired by the Traditional Architecture of Cross-Vaults
86. Coniglo Alfonso, Palmiotta Annarota, Amato Michele, Gigliotti Rosario (2023-11)
    Earth-3D Printing for Non-Structural Elements of Modular Steel Buildings:
    Proposal for an Innovative and Sustainable Construction System
87. Markin Slava, Mechtcherine Viktor (2023-10)
    The Effect of Layer Cross-Section on Plastic Shrinkage Cracking of 3D Printed Concrete Elements
88. Markin Slava, Cordova Julian, Mechtcherine Viktor (2023-10)
    Evolution of Capillary Pressure in 3D Printed Concrete Elements:
    Numerical Modelling and Experimental Validation
89. Briels David, Renz Mauritz, Nouman Ahmad, Straßer Alexander et al. (2023-10)
    Monolithic AM Façade:
    Multi-Objective Parametric Design-Optimization of Additively Manufactured Insulating Wall Elements
90. Dörrie Robin, David Martin, Freund Niklas, Lowke Dirk et al. (2023-10)
    In-Process Integration of Reinforcement for Construction Elements During Shotcrete 3D Printing
91. Dittel Gözdem, Scheurer Martin, Evers Clara, Meyer-Brötz Fabian et al. (2023-10)
    Structural Performance of Textile Reinforced 3D Printed Concrete Elements
92. Perez-Rivera Anthony, Kreiger Eric, Stidwell Samuel, Stynoski Peter et al. (2023-10)
    Finite-Element Modeling of Reinforced Additively Constructed Concrete Structures
93. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2023-09)
    Anisotropic Properties of Additively Manufactured Concrete Elements
94. Fleckenstein Julia, Bertagna Federico, Piccioni Valeria, Fechner Mareen et al. (2023-09)
    Revisiting Breuer Through Additive Manufacturing:
    Passive Solar-Control-Design-Strategies for Bespoke Concrete Building Envelope Elements
95. Coskun Agit, Jensen Mads (2023-09)
    Integrating Additional Elements in Clay 3D Printing with Human Intervention
96. Lehr Leonard, Rasanani Mahdieh, Rasehorn Inken (2023-09)
    3D Concrete Printing of Wall Elements with Integrated Multifunctional Cavities
97. Nunes Gabrielly, Anjos Marcos, Lins Ana, Negreiros Ana et al. (2023-08)
    Evaluation of the Mechanical Behavior of Representative Volumetric Elements of 3DCP Masonry-Mixtures with Partial Replacement of Cement by Limestone-Filler and Metakaolin
98. Mogra Mihir, Asaf Ofer, Sprecher Aaron, Amir Oded (2023-08)
    Design-Optimization of 3D Printed Concrete Elements Considering Buildability
99. Rizzieri Giacomo, Ferrara Liberato, Cremonesi Massimiliano (2023-07)
    Numerical Simulation of the Extrusion and Layer-Deposition-Processes in 3D Concrete Printing with the Particle-Finite-Element-Method
100. Senthilnathan Shanmugaraj, Raphael Benny (2023-07)
     Quality Monitoring of Concrete 3D Printed Elements Using Computer-Vision-Based Texture Extraction Technique
101. Pfleger Marc-Patrick, Geyer Sebastian, Hölzl Christian, Vill Markus (2023-06)
     Investigations to Improve the Carbon Footprint of Thin Walled Concrete Structures by 3D Printing Prefabricated Elements
102. Miri Zahra, Polak Maria, Baaj Hassan (2023-06)
     Finite-Element-Analysis of Hardened Properties of 3D Printed Concrete
103. Blagojevic Boris, Sawodny Oliver (2023-04)
     Path-Planning for Graded Concrete Element Fabrication
104. Ekanayaka Virama, Hürkamp André (2023-03)
     Implementation of a Surrogate-Model for a Novel Path‐Based Finite-Element-Simulation for Additive Manufacturing-Processes in Construction
105. Tahmasebinia Faham, Jabbari Amir, Skrzypkowski Krzysztof (2023-03)
     The Application of Finite Element Simulation and 3D Printing in Structural Design Within Construction Industry 4.0
106. Naboni Roberto, Breseghello Luca (2022-12)
     Additive Formwork:
     Examining Design, Fabrication Space and Resolution for Bespoke Concrete Elements
107. Rech Arianna, Chiujdea Ruxandra-Stefania, Colmo Claudia, Rossi Gabriella et al. (2022-11)
     Waste-Based Biopolymer-Slurry for 3D Printing Targeting Construction Elements
108. Mehdizadeh Samim, Zimmermann Adrian, Tessmann Oliver (2022-09)
     RotoColumn:
     A Continuous Digital Fabrication Framework for Casting Large-Scale Linear Concrete Hollow Elements
109. Abstoß Marvin, Rudolph Enrico, Funke Henrik, Gelbrich Sandra (2022-09)
     Near-Net-Shape-Extrusion and Milling of Complex Concrete Elements for the Production of Moulds
110. Lindner Marco, Gliniorz Ralf, Funke Henrik, Gelbrich Sandra (2022-09)
     Robot-Assisted Flow-Production-Processes Tool-Development for the Fabrication of Thin-Walled Fiber-Reinforced Concrete Elements
111. Ahmed Hassan, Giwa Ilerioluwa, Game Daniel, Hebert Marc et al. (2022-09)
     Studying Steel-Fiber-Reinforcement for 3D Printed Elements and Structures
112. Briels David, Kollmannsberger Stefan, Leithner Felicitas, Matthäus Carla et al. (2022-07)
     Thermal Optimization of Additively Manufactured Lightweight Concrete Wall Elements with Internal Cellular Structure through Simulations and Measurements
113. Dörrie Robin, Kloft Harald (2022-06)
     Force-Flow Compliant Robotic Path-Planning Approach for Reinforced Concrete Elements Using SC3DP
114. Krenzer Knut, Palzer Ulrich, Müller Steffen, Mechtcherine Viktor (2022-06)
     Simulation of 3D Concrete Printing Using Discrete Element Method
115. Böhler David, Mai (née Dressler) Inka, Freund Niklas, Lachmayer Lukas et al. (2022-06)
     Influence of Material and Process Parameters on Hardened State Properties of Shotcrete 3D Printed Elements
116. Sitnikov Vasily, Kitani Lena, Maneka Artemis, Lloret-Fritschi Ena et al. (2022-06)
     Design and Fabrication of Spatially Graded Concrete Elements with Ice Aggregate Method
117. Hack Norman, Jantzen Carsten, Brohmann Leon, Gerke Markus et al. (2022-06)
     A Closed-Loop Workflow for Quality Inspection and Integrated Post-Processing of 3D Printed Concrete Elements
118. Weger Daniel, Talke Daniel, Lowke Dirk, Henke Klaudius et al. (2022-06)
     Additive Manufacturing of Free-Formed Concrete Elements by Selective Binding with Calcium Silicate-Based Cements
119. Stieler David, Schwinn Tobias, Menges Achim (2022-04)
     Additive Formwork in Pre-Cast Construction:
     Agent-Based Methods for Fabrication-Aware Modularization of Concrete Building Elements
120. Stieler David, Schwinn Tobias, Menges Achim (2022-03)
     Automated Modularization for Precast Elements from Additively Manufactured Formwork
121. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2022-02)
     Extrusion-Process-Simulation and Layer-Shape-Prediction During 3D Concrete Printing Using the Particle-Finite-Element-Method
122. Zöller Raphael, Ochlast Andreas, Zimmert Florian, Braml Thomas (2022-02)
     Development of Processes for the Automated Planning and Production of Individual Reinforced Concrete Elements
123. Suntharalingam Thadshajini, Upasiri Irindu, Nagaratnam Brabha, Poologanathan Keerthan et al. (2022-01)
     Finite Element Modelling to Predict the Fire Performance of Bio-Inspired 3D Printed Concrete Wall Panels Exposed to Realistic Fire
124. Heever Marchant, Bester Frederick, Kruger Jacques, Zijl Gideon (2021-12)
     Numerical Modelling-Strategies for Reinforced 3D Concrete Printed Elements
125. Diggs-McGee Brandy, Kreiger Eric (2021-12)
     Using Isolated Temporal Analysis to Aid in the Assessment of Structural Element Quality for Additive Construction
126. Nair Sooraj, Li Anling, Mobasher Barzin, Neithalath Narayanan (2021-12)
     Effect of Layer-Height on Tensile Stress-Distribution and Crack-Width and Propagation in 3D Printed Fiber-Reinforced Flexural Elements
127. Weger Daniel, Stengel Thorsten, Gehlen Christoph, Maciejewski Yannick et al. (2021-12)
     Approval for the Construction of the First 3D Printed Detached House in Germany:
     Significance of Large-Scale Element Testing
128. Nair Sooraj, Sant Gaurav, Neithalath Narayanan (2021-11)
     Mathematical Morphology-Based Point-Cloud-Analysis-Techniques for Geometry-Assessment of 3D Printed Concrete Elements
129. Napolitano Rosanna, Forni Daniele, Menna Costantino, Asprone Domenico et al. (2021-11)
     Dynamic Characterization of the Layer-Interface Properties of 3D Printed Concrete Elements
130. Pekuss Raitis, Ancupane Amelija, Soto Borja (2021-11)
     Quantifying the Complexity of 3D Printed Concrete Elements
131. Blagojevic Boris, Schonemann Benjamin, Nigl David, Blandini Lucio et al. (2021-10)
     Trajectory-Planning for Concrete Element Fabrication with Optimal Control
132. Reinold Janis, Nerella Venkatesh, Mechtcherine Viktor, Meschke Günther (2021-09)
     Particle-Finite-Element-Simulation of Extrusion-Processes of Fresh Concrete During 3D Concrete Printing
133. Ramakrishnan Sayanthan, Muthukrishnan Shravan, Sanjayan Jay, Pasupathy Kirubajiny (2021-08)
     Concrete 3D Printing of Lightweight Elements Using Hollow-Core Extrusion of Filaments
134. Forcael Eric, Pérez Javier, Vásquez Álvaro, García-Alvarado Rodrigo et al. (2021-08)
     Development of Communication Protocols Between BIM Elements and 3D Concrete Printing
135. Wu Yuching, Yang Qianfan, Kong Xiangrui, Zhi Peng et al. (2021-05)
     Uncertainty Quantification for the Representative Volume Element of Geometrically Mono-Clinic 3D Printed Concrete
136. Ghourchian Sadegh, Butler Marko, Krüger Markus, Mechtcherine Viktor (2021-04)
     Modelling the Development of Capillary Pressure in Freshly 3D Printed Concrete Elements
137. Dielemans Gido, Briels David, Jaugstetter Fabian, Henke Klaudius et al. (2021-04)
     Additive Manufacturing of Thermally Enhanced Lightweight Concrete Wall Elements with Closed Cellular Structures
138. Vallurupalli Kavya, Farzadnia Nima, Khayat Kamal (2021-01)
     Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements:
     A Review
139. Daungwilailuk Totsawat, Pheinsusom Phoonsak, Pansuk Withit (2021-01)
     Uniaxial Load Testing of Large-Scale 3D Printed Concrete Wall and Finite-Element-Model-Analysis
140. Xiao Jianzhuang, Liu Haoran, Ding Tao (2020-11)
     Finite-Element-Analysis on the Anisotropic Behavior of 3D Printed Concrete under Compression and Flexure
141. Baz Bilal, Aouad Georges, Khalil Noura, Rémond Sébastien (2020-11)
     Inter-Layer Reinforcement of 3D Printed Concrete Elements
142. Matthäus Carla, Kofler Nadine, Kränkel Thomas, Weger Daniel et al. (2020-10)
     Inter-Layer Reinforcement Combined with Fiber-Reinforcement for Extruded Lightweight Mortar Elements
143. Hansemann Georg, Schmid Robert, Holzinger Christoph, Tapley Joshua et al. (2020-09)
     Additive Fabrication of Concrete Elements by Robots:
     Lightweight Concrete Ceiling
144. Hack Norman, Kloft Harald (2020-07)
     Shotcrete 3D Printing Technology for the Fabrication of Slender Fully Reinforced Freeform Concrete Elements with High Surface Quality:
     A Real-Scale Demonstrator
145. Esposito Laura, Menna Costantino, Asprone Domenico, Rossino Chiara et al. (2020-07)
     An Experimental Testing Procedure to Assess the Buildability Performance of 3D Printed Concrete Elements
146. Jayathilakage Roshan, Sanjayan Jay, Rajeev Pathmanathan (2020-07)
     Characterizing Extrudability for 3D Concrete Printing Using Discrete Element Simulations
147. Napolitano Rosanna, Menna Costantino, Forni Daniele, Asprone Domenico et al. (2020-07)
     Dynamic Behavior of Layered 3D Printed Concrete Elements
148. Napolitano Rosanna, Menna Costantino, Asprone Domenico, Giudice Lorenzo (2020-07)
     Mechanical Characterization of Layer-by-Layer Interface in Concrete Elements Obtained by Additive Manufacturing
149. Vukorep Ilija, Zimmermann Gregor, Sablotny Tino (2020-07)
     Robot-Controlled Fabrication of Sprayed Concrete Elements as a Cyber-Physical-System
150. Kruger Jacques, Cicione Antonio, Bester Frederick, Heever Marchant et al. (2020-07)
     Facilitating Ductile Failure of 3D Printed Concrete Elements in Fire
151. Heever Marchant, Bester Frederick, Pourbehi Mohammad, Kruger Jacques et al. (2020-07)
     Characterizing the Fissility of 3D Concrete Printed Elements via the Cohesive Zone Method
152. Toklu Yusuf, Bekdaş Gebrail, Geem Zong (2020-06)
     Harmony-Search-Optimization of Nozzle Movement for Additive Manufacturing of Concrete Structures and Concrete Elements
153. Guamán-Rivera Robert, García-Alvarado Rodrigo, Martínez-Rocamora Alejandro, Cheein Fernando (2020-05)
     A Comprehensive Performance Evaluation of Different Mobile Manipulators Used as Displaceable 3D Printers of Building Elements for the Construction Industry
154. Kloft Harald, Krauss Hans-Werner, Hack Norman, Herrmann Eric et al. (2020-05)
     Influence of Process Parameters on the Inter-Layer Bond Strength of Concrete Elements Additive Manufactured by Shotcrete 3D Printing
155. Baz Bilal, Aouad Georges, Leblond Philippe, Mansouri Omar et al. (2020-05)
     Mechanical Assessment of Concrete:
     Steel Bonding in 3D Printed Elements
156. Park Keunhyoung, Memari Ali, Hojati Maryam, Zahabi Mehrzad et al. (2020-03)
     Experimental Testing and Finite Element Modeling of 3D Printed Reinforced Concrete Beams
157. Torelli Giacomo, Fernández Mar, Lees Janet (2020-02)
     Functionally Graded Concrete:
     Design Objectives, Production Techniques and Analysis Methods for Layered and Continuously Graded Elements
158. Heinlein Ulli, Fraundorfer Andreas, Katona Sebastian, Wimmer Matthias (2020-02)
     Manufacturing of Curved Load-Bearing Concrete Elements Using an Adaptive Formwork Tool
159. Baz Bilal, Aouad Georges, Rémond Sébastien (2020-01)
     Effect of the Printing Method and Mortar’s Workability on Pull-Out Strength of 3D Printed Elements
160. Taha Nizar, Walzer Alexander, Ruangjun Jetana, Bürgin Theophil et al. (2019-09)
     Robotic AeroCrete:
     A Novel Robotic Spraying and Surface Treatment Technology for the Production of Slender Reinforced Concrete Elements
161. Kontovourkis Odysseas, Tryfonos George, Georgiou Christos (2019-06)
     Robotic Additive Manufacturing (RAM) with Clay Using Topology-Optimization Principles for Tool-Path-Planning:
     The Example of a Building Element
162. Valle‐Pello P., Álvarez‐Rabanal Felipe, Alonso‐Martínez M., Coz Díaz J. (2019-05)
     Numerical Study of the Interfaces of 3D Printed Concrete Using Discrete Element Method
163. Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
     Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing
164. Agustí-Juan Isolda, Jipa Mihail-Andrei, Habert Guillaume (2018-11)
     Environmental Assessment of Multi-Functional Building Elements Constructed with Digital Fabrication Techniques
165. Reinold Janis, Meschke Günther (2018-10)
     Particle-Finite-Element-Simulation of Fresh Concrete for 3D Printing Applications
166. Bao Yi, Xu Mingfeng, Soltan Daniel, Xia Tian et al. (2018-09)
     Three-Dimensional Printing Multifunctional Engineered Cementitious Composites (ECC) for Structural Elements
167. Yang Pu, Nair Sooraj, Neithalath Narayanan (2018-09)
     Discrete Element Simulations of Rheological Response of Cementitious Binders as Applied to 3D Printing
168. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Salet Theo (2018-09)
     Large-Scale Testing of Digitally Fabricated Concrete (DFC) Elements
169. Pfändler Patrick, Wangler Timothy, Mata-Falcón Jaime, Flatt Robert et al. (2018-09)
     Potentials of Steel-Fibers for Mesh Mould Elements
170. Silva Wilson, Andersen Thomas, Kudsk Anders, Jørgensen Kåre (2018-07)
     3D Concrete Printing of Post-Tensioned Elements
171. Asprone Domenico, Auricchio Ferdinando, Menna Costantino, Mercuri Valentina (2018-03)
     3D Printing of Reinforced Concrete Elements:
     Technology and Design Approach
172. Jipa Mihail-Andrei, Bernhard Mathias, Dillenburger Benjamin (2017-11)
     Submillimetre Formwork:
     3D Printed Plastic Formwork for Concrete Elements
173. Mechtcherine Viktor, Gram Annika, Krenzer Knut, Schwabe Jörg-Henry et al. (2014-03)
     Simulation of Fresh Concrete Flow Using Discrete Element Method (DEM)