Skip to content

#adhesion

Keywords by Co - Occurrence

  1. Alzoubi Y., Muciaccia Giovanni, Ferrara Liberato, Cibelli Antonio et al. (2026-03)
    Numerical Modelling of Interlayer Adhesion in 3D-Printed Concrete with LDPM
  2. Wang Longsheng, Huang Zili, Nguyen Giang, Karakus Murat (2026-02)
    Improving Interlayer Adhesion of 3D Printed Concrete by Filament Interlocking
  3. Huang Bo, Liu Chang, Sun Junbo, Wang Yufei et al. (2025-12)
    Optimized Synergy of Fiberglass Mesh and PP Fibers-Modified Structural Adhesive for Enhanced Mechanical and Microstructural Performance in 3D Printing Concrete
  4. Zhang Chao, Zhu Xiaohong, Li Muduo, Zhang Yuying et al. (2025-10)
    Enhancing Interface Adhesion of 3D Printable Concrete by Biochar Integration
  5. Tao Yaxin, Wang Li, Wangler Timothy, Lesage Karel et al. (2025-05)
    A (P)Review:
    Adhesion of Printcrete for Tunnel Structures
  6. Medvedev Vyacheslav, Pustovgar Andrey, Adamtsevich Aleksey, Adamtsevich Liubov et al. (2024-11)
    Improving Inter-Layer Adhesion of Cementitious Materials for 3D Construction Printing
  7. Zhang Yi, Tao Yaxin, Godinho Jose, Ren Qiang et al. (2024-11)
    Layer Interface Characteristics and Adhesion of 3D Printed Cement-Based Materials Exposed to Post-Printing Temperature Disturbance
  8. Yu Ke-Ke, Zhao Tai-Qi, Lou Qi-Ling, Ping Yang (2024-10)
    Recycled PET Fibers with Dopamine Surface Modification for Enhanced Inter-Layer Adhesion in 3D Printed Concrete
  9. Luo Qiling, Yu Ke-Ke, Long Wujian, Zheng Shuyi et al. (2024-07)
    Influence of Different Types of Superabsorbent Polymers on Fresh Mechanical Properties and Inter-Layer Adhesion of 3D Printed Concrete
  10. Wu Yiwen, Liu Chao, Bai Guoliang, Liu Huawei et al. (2024-05)
    Effect of Time Interval on the Inter-Layer Adhesion of 3D Printed Concrete with Recycled Sand:
    Multi-Factor Influencing Mechanisms and Superabsorbent Polymer Enhancement
  11. Tao Yaxin, Dai Xiaodi, Schutter Geert, Tittelboom Kim (2024-05)
    Adhesion Performance of Alkali-Activated Material for 3D Printing of Tunnel Linings at Different Temperatures
  12. Skibicki Szymon, Szewczyk Piotr, Majewska Julia, Sibera Daniel et al. (2024-03)
    The Effect of Inter-Layer Adhesion on Stress-Distribution in 3D Printed Beam Elements
  13. Tao Yaxin, Zhang Yi, Wang Xiaoyun, Godinho Jose et al. (2024-01)
    Adhesion Evaluation and Interface Characterization of 3D Printed Concrete for Automatic Repair
  14. Wang Yang, Qiu Liu-Chao, Chen Song-Gui, Liu Yi (2023-12)
    3D Concrete Printing in Air and Under Water:
    A Comparative Study on the Buildability and Inter-Layer Adhesion
  15. Zhang Yu, Yang Lin, Qian Rusheng, Liu Guojian et al. (2023-07)
    Inter-Layer Adhesion of 3D Printed Concrete:
    Influence of Layer Stacked Vertically
  16. Dang Thi, Tran Mien (2023-07)
    Variation of the Adhesion Between Concrete Printed Layers in a 3D Concrete Printed Structure
  17. Tao Yaxin, Lesage Karel, Schutter Geert, Tittelboom Kim (2023-04)
    Adhesion Studies in View of Automated Repair Using 3D Concrete Printing
  18. Tao Yaxin, Ren Qiang, Vantyghem Gieljan, Lesage Karel et al. (2023-02)
    Extending 3D Concrete Printing to Hard Rock Tunnel Linings:
    Adhesion of Fresh Cementitious Materials for Different Surface Inclinations
  19. Şahin Hatice, Mardani Ali (2023-02)
    Mechanical Properties, Durability Performance and Inter-Layer Adhesion of 3DPC Mixtures:
    A State‐of‐the‐art Review
  20. Zhao Kang, Hu Zhongjun, Wang Boxin, Li Quanheng et al. (2023-01)
    Effect of Roughness and Adhesive on the Strength of Concrete-to-Concrete Interfaces Cast from 3D Printed Prefabricated Plastic Formworks
  21. Liu Huawei, Liu Chao, Wu Yiwen, Bai Guoliang et al. (2022-09)
    3D Printing Concrete with Recycled Coarse Aggregates:
    The Influence of Pore-Structure on Inter-Layer Adhesion
  22. Liu Jianan, Wang Zhenjun, Zhao Xin, Yu Cong et al. (2022-03)
    Quantitative Evaluations on Influences of Aggregate Surface Texture on Interfacial Adhesion Using 3D Printing Aggregate
  23. Verian Kho, Ashcroft Jarron, Ziemlaski Jim, Brodesser Tim et al. (2021-12)
    The Assessment of the Buildability and Inter-Layer Adhesion Strength of 3D Printed Mortar
  24. Tao Yaxin, Lesage Karel, Tittelboom Kim, Yuan Yong et al. (2021-11)
    Influence of Substrate-Surface-Roughness and Moisture-Content on Tensile Adhesion Performance of 3D Printable Concrete
  25. Tao Yaxin, Vantyghem Gieljan, Lesage Karel, Yuan Yong et al. (2021-11)
    Adhesion Properties of Printable Polymer-Modified Concrete for Rock Tunnel Linings
  26. Weng Yiwei, Li Mingyang, Zhang Dong, Tan Ming et al. (2021-02)
    Investigation of Inter-Layer Adhesion of 3D Printable Cementitious Material from the Aspect of Printing-Process
  27. Verian Kho, Ashcroft Jarron, Carli Matthew, Bright Randall et al. (2020-07)
    Improving the Bonding Adhesion of the Cold Joints of Normal and Lightweight 3D Printing Mortars
  28. Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
    The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete
  29. Wolfs Robert, Bos Freek, Salet Theo (2019-03)
    Hardened Properties of 3D Printed Concrete:
    The Influence of Process Parameters on Inter-Layer Adhesion
  30. Zareiyan Babak, Khoshnevis Behrokh (2018-04)
    _Effects of Mixture Ingredients on Inter-Layer Adhesion of Concrete in Contour Crafting
  31. Zareiyan Babak, Khoshnevis Behrokh (2017-08)
    Effects of Interlocking on Inter-Layer Adhesion and Strength of Structures in 3D Printing of Concrete
  32. Zareiyan Babak, Khoshnevis Behrokh (2017-06)
    Inter-Layer Adhesion and Strength of Structures in Contour Crafting:
    Effects of Aggregate-Size, Extrusion-Rate, and Layer-Thickness