Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements (2021-01)¶
A Review
10.1016/j.cemconcomp.2021.103952
, Farzadnia Nima,
Journal Article - Cement and Concrete Composites, Vol. 118
Abstract
Successful implementation of extrusion-based 3D printing (3DP) of concrete requires knowledge of material flow behavior during pumping and extrusion and its influence on shape stability of printed elements. Limited emphasis exists on flow behavior and process-induced variations in material properties (rheology and composition) during printing. This paper delineates the effect of flow behavior and process-induced variations on shape stability. A comprehensive review of material flow behavior during pumping and extrusion is discussed, and its influence on shape stability of 3DP elements is highlighted. The extent of shearing in print material is shown to govern process-induced variations during pumping and extrusion. During extrusion, the degree of filtration and consolidation plays a significant role on shape stability. Accurate assessment of process-induced changes in material properties is required to ensure steady and continuous flow of material during 3DP and secure proper shape stability of printed elements
¶
57 References
- Al-Qutaifi Sarah, Nazari Ali, Bagheri Ali (2018-07)
Mechanical Properties of Layered Geopolymer Structures Applicable in Concrete 3D Printing - Asprone Domenico, Auricchio Ferdinando, Menna Costantino, Mercuri Valentina (2018-03)
3D Printing of Reinforced Concrete Elements:
Technology and Design Approach - Bhardwaj Abhinav, Jones Scott, Kalantar Negar, Pei Zhijian et al. (2019-06)
Additive Manufacturing Processes for Infrastructure Construction:
A Review - Buswell Richard, Silva Wilson, Bos Freek, Schipper Roel et al. (2020-05)
A Process Classification Framework for Defining and Describing Digital Fabrication with Concrete - Cheikh Khadija, Rémond Sébastien, Khalil Noura, Aouad Georges (2017-04)
Numerical and Experimental Studies of Aggregate-Blocking in Mortar-Extrusion - Chen Mingxu, Guo Xiangyang, Zheng Yan, Li Laibo et al. (2018-11)
Effect of Tartaric Acid on the Printable, Rheological and Mechanical Properties of 3D Printing Sulphoaluminate Cement-Paste - Chen Yu, Rodríguez Claudia, Li Zhenming, Chen Boyu et al. (2020-07)
Effect of Different Grade Levels of Calcined Clays on Fresh and Hardened Properties of Ternary-Blended Cementitious Materials for 3D Printing - Cho Seung, Kruger Jacques, Bester Frederick, Heever Marchant et al. (2020-07)
A Compendious Rheo-Mechanical Test for Printability-Assessment of 3D Printable Concrete - Choi Myoungsung, Park Kyoungsoo, Oh Taekeun (2016-06)
Viscoelastic Properties of Fresh Cement-Paste to Study the Flow Behavior - Choi Myoungsung, Roussel Nicolas, Kim Youngjin, Kim Jinkeun (2013-01)
Lubrication-Layer Properties During Concrete Pumping - Das Arnesh, Song Yu, Mantellato Sara, Wangler Timothy et al. (2020-07)
Influence of Pumping-Extrusion on the Air-Void System of 3D Printed Concrete - Ding Zhu, Wang Xiaodong, Sanjayan Jay, Zou Patrick et al. (2018-11)
A Feasibility Study on HPMC-Improved Sulphoaluminate Cement for 3D Printing - Gibbons Gregory, Williams Reuben, Purnell Phil, Farahi Elham (2013-07)
3D Printing of Cement Composites - Hack Norman, Lauer Willi (2014-04)
Mesh Mould:
Robotically Fabricated Spatial Meshes as Reinforced Concrete Formwork - Hambach Manuel, Volkmer Dirk (2017-02)
Properties of 3D Printed Fiber-Reinforced Portland-Cement-Paste - Ingaglio Joseph, Fox John, Naito Clay, Bocchini Paolo (2019-02)
Material-Characteristics of Binder-Jet 3D Printed Hydrated CSA Cement with the Addition of Fine Aggregates - Kazemian Ali, Yuan Xiao, Cochran Evan, Khoshnevis Behrokh (2017-04)
Cementitious Materials for Construction-Scale 3D Printing:
Laboratory Testing of Fresh Printing Mixture - Khalil Noura, Aouad Georges, Cheikh Khadija, Rémond Sébastien (2017-09)
Use of Calcium-Sulfoaluminate-Cements for Setting-Control of 3D Printing Mortars - Khoshnevis Behrokh (2003-11)
Automated Construction by Contour Crafting:
Related Robotics and Information Technologies - Khoshnevis Behrokh, Hwang Dooil, Yao Ke, Yeh Zhenghao (2006-05)
Mega-Scale Fabrication by Contour Crafting - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Hardened Properties of High-Performance Printing Concrete - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Lim Sungwoo, Buswell Richard, Le Thanh, Austin Simon et al. (2011-07)
Developments in Construction-Scale Additive Manufacturing Processes - Liu Zhixin, Li Mingyang, Weng Yiwei, Wong Teck et al. (2018-12)
Mixture-Design-Approach to Optimize the Rheological Properties of the Material Used in 3D Cementitious Material-Printing - Ma Siwei, Kawashima Shiho (2018-09)
Rheological and Water Transport Properties of Cement-Pastes Modified with Diutan Gum and Attapulgite-Palygorskite-Nano-Clay for 3D Concrete Printing - Ma Guowei, Li Zhijian, Wang Li (2017-12)
Printable Properties of Cementitious Material Containing Copper-Tailings for Extrusion-Based 3D Printing - Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing - Malaeb Zeina, Sakka Fatima, Hamzeh Farook (2019-02)
3D Concrete Printing:
Machine Design, Mix Proportioning, and Mix Comparison Between Different Machine Setups - Marchon Delphine, Kawashima Shiho, Bessaies-Bey Hela, Mantellato Sara et al. (2018-05)
Hydration- and Rheology-Control of Concrete for Digital Fabrication:
Potential Admixtures and Cement-Chemistry - Mechtcherine Viktor, Bos Freek, Perrot Arnaud, Silva Wilson et al. (2020-03)
Extrusion-Based Additive Manufacturing with Cement-Based Materials:
Production Steps, Processes, and Their Underlying Physics - Nair Sooraj, Panda Subhashree, Santhanam Manu, Sant Gaurav et al. (2020-05)
A Critical Examination of the Influence of Material-Characteristics and Extruder-Geometry on 3D Printing of Cementitious Binders - Nerella Venkatesh, Hempel Simone, Mechtcherine Viktor (2019-02)
Effects of Layer-Interface Properties on Mechanical Performance of Concrete Elements Produced by Extrusion-Based 3D Printing - Nerella Venkatesh, Näther Mathias, Iqbal Arsalan, Butler Marko et al. (2018-09)
In-Line Quantification of Extrudability of Cementitious Materials for Digital Construction - Panda Biranchi, Mohamed Nisar, Paul Suvash, Bhagath Singh Gangapatnam et al. (2019-07)
The Effect of Material Fresh Properties and Process Parameters on Buildability and Inter-Layer Adhesion of 3D Printed Concrete - Panda Biranchi, Paul Suvash, Lim Jian, Tay Yi et al. (2017-08)
Additive Manufacturing of Geopolymer for Sustainable Built Environment - Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction - Perrot Arnaud, Mélinge Yannick, Rangeard Damien, Micaelli Francesca et al. (2012-06)
Use of Ram Extruder as a Combined Rheo-Tribometer to Study the Behavior of High-Yield-Stress Fluids at Low Strain-Rate - Perrot Arnaud, Rangeard Damien, Nerella Venkatesh, Mechtcherine Viktor (2019-02)
Extrusion of Cement-Based Materials:
An Overview - Rahul Attupurathu, Santhanam Manu, Meena Hitesh, Ghani Zimam (2018-12)
3D Printable Concrete:
Mixture-Design and Test-Methods - Roussel Nicolas (2018-05)
Rheological Requirements for Printable Concretes - Rushing Todd, Chaar Ghassan, Eick Brian, Burroughs Jedadiah et al. (2017-01)
Investigation of Concrete Mixtures for Additive Construction - Salet Theo, Ahmed Zeeshan, Bos Freek, Laagland Hans (2018-05)
Design of a 3D Printed Concrete Bridge by Testing - Sanjayan Jay, Nematollahi Behzad, Xia Ming, Marchment Taylor (2018-04)
Effect of Surface Moisture on Inter-Layer Strength of 3D Printed Concrete - Schutter Geert, Feys Dimitri (2016-11)
Pumping of Fresh Concrete:
Insights and Challenges - Secrieru Egor, Cotardo Dario, Mechtcherine Viktor, Lohaus Ludger et al. (2018-04)
Changes in Concrete Properties During Pumping and Formation of Lubricating Material Under Pressure - Shakor Pshtiwan, Sanjayan Jay, Nazari Ali, Nejadi Shami (2017-02)
Modified 3D Printed Powder to Cement-Based Material and Mechanical Properties of Cement Scaffold Used in 3D Printing - Soltan Daniel, Li Victor (2018-03)
A Self-Reinforced Cementitious Composite for Building-Scale 3D Printing - Suiker Akke (2018-01)
Mechanical Performance of Wall Structures in 3D Printing Processes:
Theory, Design Tools and Experiments - Suiker Akke, Wolfs Robert, Lucas Sandra, Salet Theo (2020-06)
Elastic Buckling and Plastic Collapse During 3D Concrete Printing - Tay Yi, Qian Ye, Tan Ming (2019-05)
Printability-Region for 3D Concrete Printing Using Slump- and Slump-Flow-Test - Wangler Timothy, Lloret-Fritschi Ena, Reiter Lex, Hack Norman et al. (2016-10)
Digital Concrete:
Opportunities and Challenges - Weng Yiwei, Li Mingyang, Tan Ming, Qian Shunzhi (2018-01)
Design 3D Printing Cementitious Materials via Fuller-Thompson-Theory and Marson-Percy-Model - Zareiyan Babak, Khoshnevis Behrokh (2017-08)
Effects of Interlocking on Inter-Layer Adhesion and Strength of Structures in 3D Printing of Concrete - Zhang Jingchuan, Wang Jialiang, Dong Sufen, Yu Xun et al. (2019-07)
A Review of the Current Progress and Application of 3D Printed Concrete - Zhang Yu, Zhang Yunsheng, Liu Guojian, Yang Yonggan et al. (2018-04)
Fresh Properties of a Novel 3D Printing Concrete Ink - Zhang Yu, Zhang Yunsheng, She Wei, Yang Lin et al. (2019-01)
Rheological and Hardened Properties of the High-Thixotropy 3D Printing Concrete - Zhu Binrong, Pan Jinlong, Nematollahi Behzad, Zhou Zhenxin et al. (2019-07)
Development of 3D Printable Engineered Cementitious Composites with Ultra-High Tensile Ductility for Digital Construction
32 Citations
- Alnaggar Mohammed (2025-12)
Large Format Additive Manufacturing with Cementitious and Geo Materials:
General Considerations, Drivers, and Context - Diggs-McGee Brandy, Samouh Hamza, Garg Nishant (2025-11)
Predicting Cementitious Set Times via Infrared Thermography:
Potential Implications on Real-Time Quality Control During 3D Concrete Printing - Barbhuiya Salim, Das Bibhuti, Adak Dibyendu (2025-09)
Key Variables Influencing the Performance of 3D Printed Concrete:
A Comprehensive Analysis - Zuo Zibo, Huang Yulin, Corte Wouter (2025-06)
Real-Time Monitoring of Printed Concrete Weight During 3D Concrete Printing to Inversely Assess Process Stability:
Indicators and Experiments - Kolawole John, Buswell Richard, Mahmood Sultan, Isa Muhammed et al. (2025-02)
On the Origins of Anisotropy of Extrusion-Based 3D Printed Concrete:
The Roles of Filament Skin and Agglomeration - Zhang Tianjie, Wang Donglei, Lu Yang (2025-01)
A Navier-Stokes-Informed Neural Network for Simulating the Flow-Behavior of Flowable Cement-Paste in 3D Concrete Printing - Khan Mirza, Ahmed Aayzaz, Ali Tariq, Qureshi Muhammad et al. (2024-12)
Comprehensive Review of 3D Printed Concrete, Life Cycle Assessment, AI and ML Models:
Materials, Engineered Properties and Techniques for Additive Manufacturing - Gomaa Shady, Irizarry Elmer, Ahmed Ayesha, Rosa Raul et al. (2024-11)
3D Printing of Ultra-High-Performance Concrete:
Shape Stability for Various Printing Systems - Fasihi Ali, Libre Nicolas (2024-10)
Interaction Between Material and Process-Parameters During 3D Concrete-Extrusion-Process - Gu Yucun, Khayat Kamal (2024-05)
Extrudability Window and Off-Line Test-Methods to Predict Buildability of 3D Printing Concrete - Gu Yucun, Zheng Shuyi, Ma Hongyan, Long Wujian et al. (2024-05)
Effect of Absorption Kinetics of Superabsorbent Polymers on Printability and Inter-Layer Bond of 3D Printing Concrete - Wei Ying, Han Song, Chen Ziwei, Lu Jianxian et al. (2024-04)
Numerical Simulation of 3D Concrete Printing Derived from Printer Head and Printing Process - Vallurupalli Kavya, Libre Nicolas, Khayat Kamal (2024-04)
Characterization of Extrudability Using Rheology and Desorptivity - Sheng Zhaoliang, Zhu Binrong, Cai Jingming, Li Xuesen et al. (2024-03)
Development of a Novel Extrusion-Device to Improve the Printability of 3D Printable Geopolymer Concrete - Fasihi Ali, Libre Nicolas (2024-01)
From Pumping to Deposition:
A Comprehensive Review of Test-Methods for Characterizing Concrete-Printability - Li Haodao, Addai-NImoh Alfred, Kreiger Eric, Khayat Kamal (2023-12)
Methodology to Design Eco-Friendly Fiber-Reinforced Concrete for 3D Printing - Chang Ze, Chen Yu, Schlangen Erik, Šavija Branko (2023-09)
A Review of Methods on Buildability Quantification of Extrusion-Based 3D Concrete Printing:
From Analytical Modelling to Numerical Simulation - Vele Jiří, Kurilla Lukáš, Achten Henri (2023-09)
Improving Buildability of Overhangs of 3D Printed Objects Through Non-Planar Slicing Informed by Force-Flow-Analysis - Soares Augusto, Costa Hugo, Carmo Ricardo, Rodrigues Ana et al. (2023-08)
Comprehensive Design Methodology for 3D Printing Mortars - Xu Zhuoyue, Zhang Dawang, Li Hui, Yin Le et al. (2023-06)
Effects of Additives on the Mechanical Properties, Rheology, and Printing Properties of PCC-Based 3DPMs - Xu Zhuoyue, Zhang Dawang, Li Hui, Jin Haoyu et al. (2023-06)
Mix-Design and 3D Printing Correlation-Performance of PCC-Based 3DPM - Chen Hao, Zhang Daobo, Chen Peng, Li Ning et al. (2023-03)
A Review of the Extruder System Design for Large-Scale Extrusion-Based 3D Concrete Printing - Pan Tinghong, Guo Rongxin, Jiang Yaqing, Ji Xuping et al. (2022-11)
Flow and Deformation Behaviors of Cementitious Materials Through Nozzles with Different Geometric Parameters:
Experimental and Numerical Approaches - Salaimanimagudam M., Jayaprakash Jaganathan (2022-11)
Optimum Selection of Reinforcement, Assembly, and Formwork System for Digital Fabrication Technique in Construction Industry:
A Critical Review - Boddepalli Uday, Panda Biranchi, Gandhi Indu (2022-09)
Rheology and Printability of Portland-Cement-Based Materials:
A Review - Liu Xiongfei, Li Qi, Wang Fang, Ma Guowei (2022-07)
Systematic Approach for Printability Evaluation and Mechanical Property Optimization of Spray-Based 3D Printed Mortar - Zhu Binrong, Pan Jinlong, Li Junrui, Wang Penghui et al. (2022-07)
Relationship Between Microstructure and Strain-Hardening Behavior of 3D Printed Engineered Cementitious Composites - Ma Guowei, Bai Gang, Wang Li, Wang Fang (2022-07)
Explosion-Resistance of 3D Printing Ultra-High-Performance Concrete Based on Contact-Explosion Tests - Lee Jin, Kim Jae (2022-05)
Matric-Suction of Fine Sand and Its Effect on the Shape Stability of 3D Printed Cement Mortar - Shao Lijing, Feng Pan, Zuo Wenqiang, Wang Haochuan et al. (2022-02)
A Novel Method for Improving the Printability of Cement-Based Materials:
Controlling the Releasing of Capsules Containing Chemical Admixtures - Yao Hao, Xie Zonglin, Li Zemin, Huang Chuhan et al. (2021-11)
The Relationship Between the Rheological Behavior and Inter-Layer Bonding Properties of 3D Printing Cementitious Materials with the Addition of Attapulgite - Rehman Atta, Kim Jung-Hoon (2021-07)
3D Concrete Printing:
A Systematic Review of Rheology, Mix Designs, Mechanical, Microstructural, and Durability Characteristics
BibTeX
@article{vall_farz_khay.2021.EoFBaPIVoSSo3PE,
author = "Kavya Vallurupalli and Nima Farzadnia and Kamal H. Khayat",
title = "Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements: A Review",
doi = "10.1016/j.cemconcomp.2021.103952",
year = "2021",
journal = "Cement and Concrete Composites",
volume = "118",
}
Formatted Citation
K. Vallurupalli, N. Farzadnia and K. H. Khayat, “Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements: A Review”, Cement and Concrete Composites, vol. 118, 2021, doi: 10.1016/j.cemconcomp.2021.103952.
Vallurupalli, Kavya, Nima Farzadnia, and Kamal H. Khayat. “Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements: A Review”. Cement and Concrete Composites 118 (2021). https://doi.org/10.1016/j.cemconcomp.2021.103952.