Skip to content

#variation

Keywords by Co - Occurrence

  1. Wen Kuo-Wei, Su Yen-Fang, Mo Kim, Hung Chung-Chan (2025-12)
    Time-Dependent Rheology, Green Strength, and Buildability of 3D-Printed Ultra-High Performance Concrete Incorporating Various Fiber Types and Contents
  2. Mansouri Abraham, Alsuwaidi Abdulla, Binali Alreem, Binshaqooi Essa et al. (2025-09)
    Conjugate Heat Transfer and U Value Analysis of 3D Concrete Printed Envelopes with Variable‐Thickness Air Cavities in Hot‐Arid Climates
  3. Tarhan İsmail, Tarhan Yeşim (2025-09)
    Nonlinear In-Plane Response of 3D-Printed Concrete Walls with Varied Infill Patterns:
    Experimental Mix Design and Numerical Structural Assessment
  4. Kim Ki-Yeol, Lim Dong-Kyu, Choi Myoungsung (2025-09)
    Comparison of Pumping Mechanism for Various Cementitious Materials
  5. Barbhuiya Salim, Das Bibhuti, Adak Dibyendu (2025-09)
    Key Variables Influencing the Performance of 3D Printed Concrete:
    A Comprehensive Analysis
  6. Shukla Bishnu, Bharti Gaurav, Parashar Bhupender, Sharma Pushpendra et al. (2025-09)
    Variables Influencing the Performance of 3D Concrete Printing for Sustainable Construction:
    Current Status and Future Prospects
  7. Amdouni Marwen, Nasraoui Helmi, Rezgui Mohamed, Trabelsi Ali (2025-07)
    Use of the RDPP-SF Method to Analyze Rheology Variation in an AM-Cement-Based Process
  8. Bayrak Alper, Shaban Nefize, Sarıtaş Afsin, Meral Akgul Cagla (2025-07)
    A Semi-Empirical Framework for Modeling Anisotropy, Spatial Variation and Failure Mechanisms in 3D Printed Concrete
  9. Tao Yaxin, Yuan Yong, Zhang Yi, Wangler Timothy (2025-06)
    Pore Structure Analysis of Printcrete Under Varying Temperature
  10. Zhu Xingyi, Anwar Muhammad, Deng Guomin, Wang Xiaoming et al. (2025-05)
    Effect of Microwave Heating Under Varying Exposure Conditions on Rheological Properties, Interlayer Bond and Buildability Performance of 3D-Printed Geopolymer
  11. Cai Lixiong, Chen Feida, Xie Dingkun, Ye Keming (2025-05)
    Time-Varying Work Performance of Cementitious 3D Printing Mortar:
    Effect of SAC, H-PC and HPMC
  12. Beigh Mirza, Signorini Cesare, Rauf Asim, Schröfl Christof et al. (2025-04)
    Intrinsic Rheological Behavior of Limestone Calcined Clay Cementitious (LC3) Binders for Automated Construction:
    Effect of Calcium Sulfate Varieties
  13. Vysochinskiy Dmitry, Madsen Gunnar, Lande Ingrid (2025-01)
    An Experimental Study of Consistency and Strength Variation of 3D Printed Concrete Mixes
  14. Aydoğan Olcay, Kelek Bedirhan, Dittel Gözdem, Bhat Shantanu et al. (2025-01)
    Performance of 3D Printed Mortar with Varying Textile Reinforcement Properties
  15. Liu Huawei, Wang Yifei, Zhu Chao, Wu Yiwen et al. (2024-11)
    Design of 3D Printed Concrete Masonry for Wall Structures:
    Mechanical Behavior and Strength Calculation Methods Under Various Loads
  16. Gomaa Shady, Irizarry Elmer, Ahmed Ayesha, Rosa Raul et al. (2024-11)
    3D Printing of Ultra-High-Performance Concrete:
    Shape Stability for Various Printing Systems
  17. Over Derya, Ozbakan Nesil, Bustani Mehmet, Karali Bulut (2024-10)
    An Investigation of Rheological Properties and Sustainability of Various 3D Printing Concrete Mixtures with Alternative Binders and Rheological Modifiers
  18. Ivaniuk Egor, Tošić Zlata, Lordick Daniel, Mechtcherine Viktor (2024-09)
    Flow Production of Variable Curved Modules for Thin-Walled Concrete Shell Structures
  19. Wang Xianggang, Dong Enlai, Jia Zijian, Jia Lutao et al. (2024-09)
    Specimen-Size-Effect on Compressive Strength of 3D Printed Concrete Containing Coarse Aggregate with Varying Water-to-Binder-Ratios
  20. Wolf Christoph, Robens-Radermacher Annika, Unger Jörg (2024-09)
    Optimization Framework for Large-Scale Powder-Bed 3D Printed Concrete Structures Under Various Constraints
  21. Mohan Manu, Tao Yaxin, Schutter Geert, Tittelboom Kim (2024-09)
    Influence of Temperature Variations on the Performance of Two-Component 3D Printable Mixtures
  22. Parmigiani Silvia, Falliano Devid, Moro Sandro, Ferro Giuseppe et al. (2024-09)
    Preliminary Study on Multi-Functional Building Components Utilizing Variable Density Foamed Concrete via 3D Printing
  23. Huang Shuyi, Xu Weiguo, Anton Ana-Maria, Dillenburger Benjamin (2024-08)
    Self-Supporting Lamellae:
    Shape Variation Methods for the 3D Concrete Printing of Large Overhang Structures
  24. Bayrak Alper, Shaban Nefize, Seyedian Choubi Sepehr, Tuncer Emran et al. (2024-05)
    Spatial Variation of Physical, Mechanical, and Thermophysical Properties of 3D Printed Concrete Across a Full-Scale Wall
  25. Ma Lei, Jia Zijian, Chen Yuning, Jiang Yifan et al. (2024-03)
    Water Loss and Shrinkage Prediction in 3D Printed Concrete with Varying w/b and Specimen Sizes
  26. Jia Lutao, Jia Zijian, Zhang Zedi, Tang Zhenzhong et al. (2024-02)
    Effect of Recycled Brick-Powder with Various Particle-Features on Early-Age Hydration, Water-State, and Rheological Properties of Blended Cement-Paste in the Context of 3D Printing
  27. Pal Biswajit, Chourasia Ajay, Kapoor Ashish (2024-01)
    Intricacies of Various Printing Parameters on Mechanical Behavior of Additively Constructed Concrete
  28. Slavcheva Galina, Artamonova Olga, Kotova Кristina, Shvedova Mariia et al. (2023-12)
    Pull-Out Behavior of Steel- and Carbon-Fibers in 3D Printable Cement Matrices of Various Compositions
  29. Zhi Peng, Wu Yuching, Rabczuk Timon (2023-11)
    Effects of Time-Varying Liquid Bridge Forces on Rheological Properties, and Resulting Extrudability and Constructability of Three-Dimensional Printing Mortar
  30. Dang Thi, Tran Mien (2023-07)
    Variation of the Adhesion Between Concrete Printed Layers in a 3D Concrete Printed Structure
  31. Ravula Risheek, Gatheeshgar Perampalam (2023-07)
    On the Thermal-Energy Performance of 3D Printed Concrete Wall Panels Designed with Varying Insulation Ratios
  32. Oh Sangwoo, Hong Geuntae, Choi Seongcheol (2023-05)
    Determining the Effect of Superabsorbent Polymers, Macrofibers, and Resting Time on the Rheological Properties of Cement Mortar Using Analysis of Variance:
    A 3D Printing Perspective
  33. Giridhar Greeshma, Prem Prabhat, Jiao Dengwu (2023-03)
    Effect of Varying Shear Rates at Different Resting Times on the Rheology of 3D Printable Concrete
  34. İlcan Hüseyin, Şahin Oğuzhan, Kul Anil, Ozcelikci Emircan et al. (2022-12)
    Rheological Property and Extrudability Performance-Assessment of Construction and Demolition Waste-Based Geopolymer Mortars with Varied Testing Protocols
  35. Zhang Chao, Jia Zijian, Luo Zhe, Deng Zhicong et al. (2022-11)
    Printability and Pore-Structure of 3D Printing Low-Carbon Concrete Using Recycled Clay-Brick-Powder with Various Particle-Features
  36. García-Alvarado Rodrigo, Moroni-Orellana Ginnia, Banda Pablo (2022-10)
    Development of Variable Residential Buildings with 3D Printed Walls
  37. Diwan Anushree, Patel Shiv, Pal Ankit, Dwivedi Ashutosh et al. (2022-10)
    Flow Characteristics of Cement Mortar with Varied Silica-Fume for Additive Construction
  38. Gebhard Lukas, Esposito Laura, Menna Costantino, Mata-Falcón Jaime (2022-07)
    Inter-Laboratory Study on the Influence of 3D Concrete Printing Set-Ups on the Bond Behavior of Various Reinforcements
  39. Nuh Mishael, Oval Robin, Orr John (2022-06)
    ARCS:
    Automated Robotic Concrete Spraying for the Fabrication of Variable Thickness Doubly Curved Shells
  40. Bi Minghao, Tran Jonathan, Xia Lingwei, Ma Guowei et al. (2022-06)
    Topology-Optimization for 3D Concrete Printing with Various Manufacturing-Constraints
  41. Srivastava Manu, Ammons Jake, Peerzada Abdul, Krovi Venkat et al. (2022-05)
    3D Printing of Concrete with a Continuum-Robot-Hose Using Variable-Curvature Kinematics
  42. Tay Yi, Lim Jian, Li Mingyang, Tan Ming (2022-03)
    Creating Functionally Graded Concrete Materials with Varying 3D Printing Parameters
  43. Yuan Philip, Zhan Qiang, Wu Hao, Beh Hooi et al. (2021-11)
    Real-Time Tool-Path-Planning and Extrusion-Control-Method for Variable-Width 3D Concrete Printing
  44. Xu Yanqun, Yuan Qiang, Li Zemin, Shi Caijun et al. (2021-09)
    Correlation of Inter-Layer Properties and Rheological Behaviors of 3DPC with Various Printing Time Intervals
  45. Zhan Qiang, Wu Hao, Zhang Liming, Yuan Philip et al. (2021-09)
    3D Concrete Printing with Variable-Width Filament
  46. Burger Joris, Wangler Timothy, Chiu Yu-Hung, Techathuvanun Chanon et al. (2021-09)
    Material-Informed Formwork Geometry:
    The Effects of Cross-Sectional Variation and Patterns on the Strength of 3D Printed Eggshell Formworks
  47. Suntharalingam Thadshajini, Upasiri Irindu, Gatheeshgar Perampalam, Poologanathan Keerthan et al. (2021-07)
    Fire-Resistance of 3D Printed Concrete Composite Wall Panels Exposed to Various Fire Scenarios
  48. Schmidt Albrecht, Mengesha Meron, Göbel Luise, Könke Carsten et al. (2021-05)
    Numerical Modeling of an Extrusion-Based Concrete Printing Process Considering Spatially and Temporarily Varying Material and Process Parameters
  49. Gebhard Lukas, Mata-Falcón Jaime, Anton Ana-Maria, Dillenburger Benjamin et al. (2021-04)
    Structural Behavior of 3D Printed Concrete Beams with Various Reinforcement-Strategies
  50. Vallurupalli Kavya, Farzadnia Nima, Khayat Kamal (2021-01)
    Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements:
    A Review
  51. Mohan Manu, Rahul Attupurathu, Tittelboom Kim, Schutter Geert (2020-10)
    Rheological and Pumping Behavior of 3D Printable Cementitious Materials with Varying Aggregate Content
  52. Lao Wenxin, Li Mingyang, Tjahjowidodo Tegoeh (2020-09)
    Variable-Geometry Nozzle for Surface Quality Enhancement in 3D Concrete Printing
  53. Mengesha Meron, Schmidt Albrecht, Göbel Luise, Lahmer Tom (2020-07)
    Numerical Modeling of an Extrusion-Based 3D Concrete Printing-Process Considering a Spatially-Varying Pseudo-Density Approach
  54. Xu Jie, Ding Lieyun, Cai Lixiong, Zhang Lichao et al. (2019-04)
    Volume-Forming 3D Concrete Printing Using a Variable-Size Square Nozzle
  55. Xu Jie, Ding Lieyun (2018-07)
    Volume-Forming 3D Concrete Printing Using a Variable-Diameter Square Nozzle
  56. Khoshnevis Behrokh, Dutton Rosanne (1998-01)
    Innovative Rapid Prototyping Process Makes Large-Sized, Smooth-Surfaced Complex Shapes in a Wide Variety of Materials