Skip to content

#stability

Keywords by Co - Occurrence

  1. Kumar Sandeep, Dixit Anjaneya (2026-04)
    3D-Printable Concrete Using Stabilized Soil:
    Effect of Binders and Curing Regimes on the Engineering Performance
  2. Bihari Ádám, Nemes Rita (2026-01)
    Investigation of Water Vapor Adsorption and Thermal Conductivity Properties of Stabilized Earth Mixtures for the Construction of 3D Printed Wall Structures
  3. Maierdan Yierfan, Armistead Samuel, Seshadri Akul, Carcassi Olga et al. (2025-10)
    Locust Bean Gum–Stabilized Kaolin-Rich Earthen Composites:
    From On-Land to Underwater 3D Printing
  4. Han Seongho, Addai-NImoh Alfred, Gu Yucun, Khayat Kamal (2025-10)
    Enhanced Shape Stability of Flowable Mortar Through CO2 Injection for 3D Concrete Printing Application
  5. Liu Renlong, Tang Jiyu, Feng Hu, Cheng Zhangqi (2025-09)
    Study on the Instability of Early Age 3D Printing Cement-Based Structure:
    Considering the Influence of Interface
  6. Mahdy Deena, Sameh Hazem, Fekry Mayar (2025-09)
    Structural Stability of 3D-Printed Earthen Catenary Domes:
    Experimental and Analytical Insights
  7. Matos Ana, Emiroğlu Mehmet, Milheiro-Oliveira Paula (2025-09)
    Predicting Stabilized Soil Mixture Proportions for 3D Printing:
    Preliminary Study Using the Design of Experiments Approach
  8. Berman Ofer, Zavadsky Andrey, Drimer Nitai, Shashar Nadav et al. (2025-08)
    A Pure Ceramic 3D Printed Artificial Reef:
    Stability and Response
  9. Oulkhir Fatima, Akhrif Iatimad, Jai Mostapha, Rihani Nadir (2025-07)
    Clay and Alginate-Based Mixtures 3D Printing:
    A Numerical Procedure for Shape Stability and Buildability Assessment
  10. Zuo Zibo, Huang Yulin, Corte Wouter (2025-06)
    Real-Time Monitoring of Printed Concrete Weight During 3D Concrete Printing to Inversely Assess Process Stability:
    Indicators and Experiments
  11. Mahdy Deena, Dara Seni, Abdelrahim Marwa (2025-06)
    Evaluating Structure Stability of Self-Supporting 3D Printed Earth-Based Cantilevers Using Robotic ARM
  12. Gupta Souradeep, Sahana C., Soda Prabhath, Dwivedi Ashutosh (2025-06)
    Development of Carbon Sequestering 3D-Printable Stabilized Earth Materials:
    Investigation into Engineering Performance and Resistance Against Acid Attack
  13. Zavaleta Diana, Quispe Axcel, Rojas Omar, Silva Guido et al. (2025-02)
    3D-Printing of a Basic Housing Unit Prototype Using Earthen-Based Matrices Stabilized with Rice Husk Fibers
  14. Park Ji-seul, Jeong Seung-Su, Hong Seungkee, Lee Seohyung et al. (2025-02)
    Mechanical Modeling for Prediction of Structural Stability of Cylindrical Structures During 3D Concrete Printing
  15. Sahoo Pitabash, Gupta Souradeep (2024-11)
    3D Printing with Geopolymer-Stabilized Excavated Earth:
    Enhancement of Printability and Engineering-Performance Through Controlled Retardation
  16. Gomaa Shady, Irizarry Elmer, Ahmed Ayesha, Rosa Raul et al. (2024-11)
    3D Printing of Ultra-High-Performance Concrete:
    Shape Stability for Various Printing Systems
  17. Vele Jiří, Prokop Simon, Ciganik Ondrej, Kurilla Lukáš et al. (2024-09)
    Non-Planar 3D Printing of Clay Columns:
    A Method for Improving Stability and Performance
  18. Rehman Atta, Kang Seungwoo, Kim Jung-Hoon (2024-09)
    Nozzle-Integrated Slump-Scanner-Test:
    Development of an Automated Shape-Stability and Instantaneous Yield-Stress-Measurement-Method for the Set-on-Demand 3D Concrete Printing
  19. Jacquet Yohan, Maierdan Yierfan, Kawashima Shiho, Perrot Arnaud (2024-09)
    Stability-Prediction of 3D Printable Fresh Construction Materials by Analyzing Thixotropic Compressive Properties Using Extensional Dynamic Mechanical Analysis
  20. Park Gwang, Kim Jae (2024-09)
    Optimization Shape Stability for Printed Pre-Cast Column Using Matric-Suction-Effect
  21. Liu Chao, Zhang Zedi, Jia Zijian, Cao Ruilin et al. (2024-07)
    Quantitative Characterization of Bubble-Stability of Foam-Concrete Throughout Extrusion-Process:
    From Yield-Stress , Viscosity and Surface Tension Point of View
  22. Boddepalli Uday, Panda Biranchi, Gandhi Indu (2024-07)
    Impact of Water to Solids Ratio on Stability, Printability, and Mechanical Characteristics of 3D Printable Foam-Concrete
  23. Sahana C., Soda Prabhath, Dwivedi Ashutosh, Kumar Sandeep et al. (2024-07)
    3D Printing with Stabilized Earth:
    Material-Development and Effect of Carbon-Sequestration on Engineering-Performance
  24. Boddepalli Uday, Gandhi Indu, Panda Biranchi (2024-05)
    Synergistic Effect of Fly-Ash and Polyvinyl-Alcohol-Fibers in Improving Stability, Rheology, and Mechanical Properties of 3D Printable Foam-Concrete
  25. Soda Prabhath, Dwivedi Ashutosh, Sahana C., Gupta Souradeep (2024-03)
    Development of 3D Printable Stabilized Earth-Based Construction Materials Using Excavated Soil:
    Evaluation of Fresh and Hardened Properties
  26. Şahin Hatice, Mardani Ali, Beytekin Hatice (2024-02)
    Effect of Silica-Fume Utilization on Structural Build-Up, Mechanical and Dimensional Stability Performance of Fiber-Reinforced 3D Printable Concrete
  27. Maierdan Yierfan, Armistead Samuel, Mikofsky Rebecca, Huang Qiqi et al. (2023-11)
    Rheology and 3D Printing of Alginate Bio-Stabilized Earth Concrete
  28. Sukontasukkul Piti, Khomkum Sila, Maho Buchit, Fujikake Kazunori (2023-09)
    Printability and Shape Stability of Cement Mortar Incorporating Low Volume of Micro-Polypropylene Fiber for 3D Printing Application
  29. Harbouz Ilhame, Rozière Emmanuel, Loukili Ahmed, Yahia Ammar (2023-07)
    Effect of the Structuration-Rate on Dimensional Stability and Mechanical Performance of 3D Printed Mortars
  30. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Šeta Berin et al. (2023-05)
    Computational Analysis of Yield-Stress-Buildup and Stability of Deposited Layers in Material-Extrusion Additive Manufacturing
  31. Boddepalli Uday, Gandhi Indu, Panda Biranchi (2022-12)
    Stability of Three-Dimensional Printable Foam-Concrete as Function of Surfactant Characteristics
  32. Park Ji-seul, Jeong Seung-Su, Hong Sung-Gul (2022-09)
    Numerical Analysis on Stability of Cylindrical Structures in 3D Printing Process
  33. Silva Guido, Ñañez Robert, Zavaleta Diana, Burgos Valeria et al. (2022-07)
    Eco-Friendly Additive Construction:
    Analysis of the Printability of Earthen-Based Matrices Stabilized with Potato-Starch-Gel and Sisal-Fibers
  34. Tao Yaxin, Ren Qiang, Lesage Karel, Tittelboom Kim et al. (2022-07)
    Shape Stability of 3D Printable Concrete with River and Manufactured Sand Characterized by Squeeze Flow
  35. Diab Zeinab, Do Duc, Rémond Sébastien, Hoxha Dashnor (2022-06)
    Uncertainty Quantification of Concrete Properties at Fresh State and Stability-Analysis of the 3D Printing Process by Stochastic Approach
  36. Straßer Alexander, Matthäus Carla, Weger Daniel, Kränkel Thomas et al. (2022-06)
    Selective Paste-Intrusion:
    Stability of Cement-Paste Mixtures Towards Changing Ambient Temperature
  37. Lee Jin, Kim Jae (2022-06)
    Matric-Suction and Its Effect on the Shape Stability of 3D Printed Concrete
  38. Jin Yuan, Xu Jiabin, Li Yali, Zhao Zhihui et al. (2022-06)
    Rheological Properties, Shape Stability and Compressive Strength of 3D Printed Colored Cement Composites Modified by Needle-Like Pigment
  39. Lee Jin, Kim Jae (2022-05)
    Matric-Suction of Fine Sand and Its Effect on the Shape Stability of 3D Printed Cement Mortar
  40. Chen Mingxu, Li Haisheng, Yang Lei, Wang Shoude et al. (2022-03)
    Rheology and Shape-Stability-Control of 3D Printed Calcium-Sulphoaluminate-Cement Composites Containing Paper-Milling-Sludge
  41. Mollah Md., Comminal Raphaël, Serdeczny Marcin, Pedersen David et al. (2022-01)
    Numerical Predictions of Bottom-Layer-Stability in Material-Extrusion Additive Manufacturing
  42. Cho Seung, Rooyen Algurnon, Kearsley Elsabe, Zijl Gideon (2021-12)
    Foam Stability of 3D Printable Foamed Concrete
  43. Liu Xuanting, Sun Bohua (2021-11)
    The Influence of Interface on the Structural Stability in 3D Concrete Printing Processes
  44. Liu Chao, Wang Xianggang, Chen Yuning, Zhang Chao et al. (2021-06)
    Influence of Hydroxypropyl-Methylcellulose and Silica-Fume on Stability, Rheological Properties, and Printability of 3D Printing Foam-Concrete
  45. Dai Shuo, Zhu Huajun, Zhai Munan, Wu Qisheng et al. (2021-06)
    Stability of Steel-Slag as Fine Aggregate and Its Application in 3D Printing Materials
  46. Benamara Abdeslam, Pierre Alexandre, Kaci Abdelhak, Mélinge Yannick (2021-05)
    Digital Printing of Mortar in Carrier-Liquid:
    Comparison of Approaches to Predict Print Stability
  47. Vallurupalli Kavya, Farzadnia Nima, Khayat Kamal (2021-01)
    Effect of Flow Behavior and Process-Induced Variations on Shape Stability of 3D Printed Elements:
    A Review
  48. Silva Guido, Quispe L., Kim Suyeon, Nakamatsu Javier et al. (2019-11)
    Development of a Stabilized Natural Fiber-Reinforced Earth Composite for Construction Applications Using 3D Printing
  49. Bos Freek, Wolfs Robert, Ahmed Zeeshan, Hermens Lex et al. (2019-09)
    The Influence of Material Temperature on the In-Print Strength and Stability of a 3D Print Mortar
  50. Kim Kwan, Yeon Jaeheum, Lee Hee, Yeon Jung (2019-08)
    Dimensional Stability of SBR-Modified Cementitious Mixtures for Use in 3D Additive Construction
  51. Kazemian Ali, Yuan Xiao, Meier Ryan, Cochran Evan et al. (2017-06)
    Construction-Scale 3D Printing:
    Shape Stability of Fresh Printing Concrete