Skip to content

#earth

Keywords by Co - Occurrence

  1. Akula Pavan, Ray Saswati, Bastola Ashish, Masoomi Maryam et al. (2026-04)
    Suction-Based Framework of 3D-Printed Earthen Materials:
    Linking Geotechnical Properties, Buildability, and Strength
  2. Rojas Omar, Nakamatsu Javier, Aguilar Rafael, Ñañez Robert et al. (2026-03)
    Improved Resistance to Water Erosion and Self-Healing Capacity of Earthen-Based 3D Printed Elements Using Enzyme-Induced Carbonate Precipitation (EICP)
  3. Zozaya Daiquiri, Shojaeian Hamideh, Uviña-Contreras Francisco, Hojati Maryam (2026-03)
    3D Printing of Earth-Based Mixtures:
    Linking Material Design, Printability, and Structural Performance
  4. Maierdan Yierfan, Seshadri Akul, Jacquet Yohan, Araujo Sabrina et al. (2026-03)
    Programming Earthen Materials’ Shape Retention with Synergistic Biopolymers for 3D Printing
  5. Yousaf Arslan, Koç Muammer (2026-03)
    Bio-Inspired 4D Printing of Earthen Soil Composites for Structural Living Wall Applications
  6. Dhakal Suvechha, Tiwari Nitin (2026-03)
    Printability and Structural Integrity of Fiber-Reinforced Earth-Based Materials for 3D Printing
  7. Mollah Md., Šeta Berin, Spangenberg Jon (2026-02)
    A Virtual 3D Printing Framework for Off-Earth Construction
  8. Bihari Ádám, Nemes Rita (2026-01)
    Investigation of Water Vapor Adsorption and Thermal Conductivity Properties of Stabilized Earth Mixtures for the Construction of 3D Printed Wall Structures
  9. Mudi Charitha, Gupta Souradeep, Basithali E. (2026-01)
    Influence of Engineered Natural Fiber Reinforcement in 3D Printed Earth-Based Cementitious Composites:
    Fresh and Hardened Properties
  10. Tarhan Yeşim, Tarhan İsmail, Perrot Arnaud (2026-01)
    Improving Bond Performance of 3D-Printable Earth-Based Mortar Reinforced with Jute Fibers
  11. Mechtcherine Viktor, Gleiser Leonie (2026-01)
    Back to Earth:
    Building the Future with an Ancient Material
  12. Jenny David, Cutajar Sacha, Chan Yen-Fen, Jenny Ercan et al. (2026-01)
    Earth-to-Earth:
    Ultra-Thin 3D-Printed Clay Formwork for in-Situ Earth-Casting
  13. Tinoco Matheus, Lima Moura Paiva Rayane, Andrade Luiza, Mendoza Reales Oscar (2025-12)
    Hybrid 3D Printable Mixtures Incorporating Fine Earth, Portland Cement, and Fly Ash:
    A Sustainable Alternative to Cement-Intensive Systems
  14. Benz Hendrik, Nguyen Trong The, Klemt-Albert Katharina (2025-11)
    Real-Time Vision-Based Defect Detection for Large-Scale on-Site Earthen Additive Manufacturing:
    Annotated Dataset and Dual-Model Framework
  15. Matos Ana, Milheiro-Oliveira Paula, Varum Humberto (2025-11)
    New Technologies for Earth Construction:
    3D Printing, a Reality or a Mirage?
  16. Faleschini Flora, Trento Daniel, Zanini Mariano (2025-11)
    Earth as a Building Material:
    From Traditional Building Techniques to Additive Manufacturing
  17. Maierdan Yierfan, Armistead Samuel, Seshadri Akul, Carcassi Olga et al. (2025-10)
    Locust Bean Gum–Stabilized Kaolin-Rich Earthen Composites:
    From On-Land to Underwater 3D Printing
  18. Boldini Alain, Giwa Ilerioluwa, Kamel Ehsan, Kazemian Ali (2025-10)
    Spatiotemporal Temperature Prediction in 3D-Printed Sulfur Concrete for Automated Construction on Earth and Beyond
  19. Mahdy Deena, Sameh Hazem, Fekry Mayar (2025-09)
    Structural Stability of 3D-Printed Earthen Catenary Domes:
    Experimental and Analytical Insights
  20. Yousaf Arslan, Rashid Ans, Koç Muammer (2025-09)
    Additive Manufacturing for Vernacular Architecture Using Local Earthen Soil and Bio-Waste Materials
  21. Yousaf Arslan, Khan Shoukat, Koç Muammer (2025-07)
    Material, Process, and Design Optimization of Local Earthen Soil Reinforced with Natural Fiber Waste and Nanoclay for 3DP of Functional Structures
  22. Hanifa Mohamad, Mendonça Paulo, Figueiredo Bruno, Mahdy Deena (2025-06)
    Experimental Study on the Thermal Performance of 3D-Printed Earthen Wall Segment with Optimized Infill Pattern
  23. Mahdy Deena, Marais Eugene, Abdelrahim Marwa, Dubor Alexandre et al. (2025-06)
    Life Cycle Assessment of Earth-Based Residential Unit “TOVA”:
    A 3D Printed On-Site Load-Bearing Structure
  24. Mahdy Deena, Dara Seni, Abdelrahim Marwa (2025-06)
    Evaluating Structure Stability of Self-Supporting 3D Printed Earth-Based Cantilevers Using Robotic ARM
  25. Gupta Souradeep, Sahana C., Soda Prabhath, Dwivedi Ashutosh (2025-06)
    Development of Carbon Sequestering 3D-Printable Stabilized Earth Materials:
    Investigation into Engineering Performance and Resistance Against Acid Attack
  26. Rückrich Stefanie, Austern Guy, Denay Ofer, Seiwert Paul et al. (2025-05)
    3D-Printed Earth-Fiber Envelopes:
    Optimization of Thermal Performance and Industrial Applicability
  27. Niroumand Hamed, Bałachowski Lech (2025-05)
    Green Building with 3D Printed Earth Materials:
    Current Issues and Future Prospects of 3D Printed Green Houses for the Construction Sector
  28. Shen Jianyu, Ye Taohua, Xiao Jianzhuang, Li Shuisheng (2025-04)
    Mechanical and Thermal Properties of 3D Printed Earth Concrete Solidified by Geopolymers:
    A Study of Utilizing Excavated Clay
  29. Meyuhas Ohad, Larianovsky Pavel, Bentur Arnon, Magdassi Shlomo et al. (2025-03)
    Methods for Earth-Based Falsework in Multi-Material Additive Manufacturing at an Architectural Scale
  30. Akhrif Iatimad, Oulkhir Fatima, Jai Mostapha, Rihani Nadir et al. (2025-03)
    Earth-Based Materials 3D Printing, Extrudability and Buildability Numerical Investigations
  31. Chadha Kunaljit, Vasey Lauren, Gramazio Fabio, Kohler Matthias (2025-02)
    Adaptive Robotic Tamping:
    A Novel Robotic Method for Formative Surface Finishing in Earth-Based Additive Manufacturing
  32. Sangiorgio Valentino, Rossetti Pietro, Polidoro Anthony, Rossi Emilio (2025-02)
    Sustainable Raw-Earth Blocks Achieved with 3D-Printed Formworks:
    Parametric Modeling, Prototyping, and Laboratory Testing
  33. Zavaleta Diana, Quispe Axcel, Rojas Omar, Silva Guido et al. (2025-02)
    3D-Printing of a Basic Housing Unit Prototype Using Earthen-Based Matrices Stabilized with Rice Husk Fibers
  34. Oulkhir Fatima, Rihani Nadir, Akhrif Iatimad, Jai Mostapha (2025-01)
    Integration of Earth-Based Materials in 3D Concrete Printing:
    Physico-Chemical and Technological Characterization
  35. Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2024-12)
    From Local Earth to Modern Structures:
    A Critical Review of 3D Printed Cement Composites for Sustainable and Efficient Construction
  36. Sahoo Pitabash, Gupta Souradeep (2024-11)
    3D Printing with Geopolymer-Stabilized Excavated Earth:
    Enhancement of Printability and Engineering-Performance Through Controlled Retardation
  37. Cabay Edouard, Ayoub Sara (2024-11)
    Earth Architecture:
    Integtrating Tradition for 3D Printing Solutions
  38. Curth Alexander, Alvarez Eduardo, Sass Lawrence, Norford Leslie et al. (2024-11)
    Additive Energy:
    3D Printing Thermally Performative Building Elements with Low-Carbon Earthen Materials
  39. Motamedi Mahan, Mesnil Romain, Tang Anh-Minh, Pereira Jean-Michel et al. (2024-11)
    Structural Build-Up of 3D Printed Earth by Drying
  40. Nashed Kabalan Ola, Ciblac Thierry, Marceau Sandrine, Roy Robert (2024-11)
    Advancing Raw Earth Reinforcement for 3D Printed Architecture:
    Durability-Assessment
  41. Tabassum Nusrat, Duarte José (2024-10)
    Exploring Multi-Directional 3D Printing for Enclosures on Earth and Beyond:
    Sensitivity-Analysis of Buildability
  42. Carcassi Olga, Akemah Tashania, Alon Lola (2024-09)
    3D Printed Lightweight Earth Fiber:
    From Tiles to Tessellations
  43. Curth Alexander, Pearl Natalie, Wissemann Emily, Cousin Tim et al. (2024-09)
    EarthWorks:
    Zero-Waste 3D Printed Earthen Formwork for Shape-Optimized, Reinforced Concrete Construction
  44. Asaf Ofer, Larianovsky Pavel, Bentur Arnon, Sprecher Aaron (2024-09)
    Transforming Earths:
    Designing 3D Printable Materials for Robotic Earth Architecture
  45. Mahdy Deena, Abdelrahim Marwa, Alatassi Adel (2024-09)
    Assessment of Air-Flow Performance Through Openings in 3D Printed Earthen Structure Using CFD Analysis
  46. Gosslar Joschua, Dorresteijn Evelien, David Martin, Leusmann Thorsten et al. (2024-09)
    Digital Fabrication with Local Earthen Materials:
    The Relevance of Process Robustness
  47. Maierdan Yierfan, Armistead Samuel, Mikofsky Rebecca, Carcassi Olga et al. (2024-09)
    Exploring Locust Bean Gum as a Robust Binder and Rheology Modifier for Earth Concrete
  48. Cutajar Sacha, Quadranti Elia, Lloret-Fritschi Ena (2024-09)
    3D Printed Earth Formworks for Concrete:
    Exploring Fabrication Feasibility for Complex Filler Slabs
  49. Jacquet Yohan, Perrot Arnaud (2024-09)
    Hygroscopic Insulation of Open Matrix Core Wall System as a Strategy to Enhance Buildability of 3D Printed Earth-Based Materials Structures
  50. Jenny David, Gramazio Fabio, Kohler Matthias (2024-09)
    Reimagining Earthen Materials:
    The New Era of Sustainable and Digital Construction
  51. Giacomobono Leonardo, Argenti Maria, Ferretti Elena, Paparella Giulio (2024-08)
    Three-Dimensional Printing with Earthen Materials:
    A Settlement-Scale Design Experience
  52. Perrot Arnaud, Jacquet Yohan, Caron Jean-François, Mesnil Romain et al. (2024-08)
    Snapshot on 3D Printing with Alternative Binders and Materials:
    Earth, Geopolymers, Gypsum and Low-Carbon Concrete
  53. Carcassi Olga, Maierdan Yierfan, Kawashima Shiho, Alon Lola (2024-08)
    Recyclability of Earth-Fiber Materials for 3D Printing
  54. Ahmad Lina, Jabi Wassim, Sosa Marco (2024-08)
    Non-Planar Robotic Printing of Earth-Based Material:
    A Case Study Using Cob-Like Mixture
  55. Kloft Harald, Salamatian Ali, Gosslar Joschua, Dorresteijn Evelien et al. (2024-07)
    Robotic Rammed Earth-Concrete (RREC):
    A Novel Additive Manufacturing Technology to Strengthen Rammed Earth Structures by Integrated Rammed Concrete Parts
  56. Guihéneuf Simon, Audren Mathieu, Lely Nathan, Borgne Tangi et al. (2024-07)
    Monitoring and Modeling of Formwork Pressure Exerted by Castable Earthen Materials
  57. Gonzales Betty, Zavaleta Diana, Bertolotti Bruno, Aguilar Rafael et al. (2024-07)
    Comprehensive Investigation into the Influence of Soil Composition and Water Content on Cracking Due to Drying Shrinkage in 3D Printed Earthen Structures
  58. Gleiser Leonie, Pierer Robin, Markin Slava, Butler Marko et al. (2024-07)
    Additive Manufacturing with Earth-Based Materials:
    Minimization of Shrinkage Deformation
  59. Mai (née Dressler) Inka, Gosslar Joschua, Khader Noor, Lowke Dirk et al. (2024-07)
    Workflow for Earth-Based 3D Printing
  60. Paquet Elodie, Furet Benoît, Perrot Arnaud (2024-07)
    3D Printed Raw Earth Structures to Create in Cities Vegetated Oasis of Coolness
  61. Markovic Ivan, Horat Alexandra, Pantellini Danilo (2024-07)
    Optimization of Earth-Based Mixtures in Terms of 3D Printability and Mechanical Properties:
    Feasibility Study
  62. Sahana C., Soda Prabhath, Dwivedi Ashutosh, Kumar Sandeep et al. (2024-07)
    3D Printing with Stabilized Earth:
    Material-Development and Effect of Carbon-Sequestration on Engineering-Performance
  63. Trento Daniel, Faleschini Flora, Masoomi Maryam, Pellegrino Carlo et al. (2024-07)
    Additive Manufacturing for Earth-Based Materials:
    An Experimental Investigation
  64. Shin Eun, Carcassi Olga, Maierdan Yierfan, Kawashima Shiho et al. (2024-07)
    Developing 3D Printed Natural Fiber-Rich Earth Materials in Construction
  65. Hanifa Mohamad, Daruari Harish, Figueiredo Bruno, Mendonça Paulo (2024-07)
    Embodied Carbon of Structural Earthen Composites with Natural Materials and Byproducts Suitable for Robotic 3D Printing
  66. Maierdan Yierfan, Zhao Diandian, Choksi Pooja, Garmonina Maria et al. (2024-05)
    Rheology, 3D Printing, and Particle-Interactions of Xanthan-Gum-Clay Binder for Earth Concrete
  67. Cutajar Sacha, Dielemans Gido, Krakovská Ema, Dorresteijn Evelien et al. (2024-04)
    Up-Scaling Earth Formworks:
    3D Printing-Strategies for Material-Optimized Reinforced Concrete Structures
  68. Calabrese Giuseppe, Hidding Arwin, Bier Henriette (2024-04)
    Review of Cementless Materials for 3D Printing of On- and Off-Earth Habitats
  69. Darweesh Barrak, Rael Ronald (2024-04)
    From Walls to Roofs:
    Formwork-Free Robotic Earthen Vault Construction
  70. Dubor Alexandre, Cabay Edouard, Tayoun Yara, Carrasco Oriol et al. (2024-04)
    3D Printed Earth Architecture:
    Design Approach for a Performative Habitat
  71. Carcassi Olga, Maierdan Yierfan, Akemah Tashania, Kawashima Shiho et al. (2024-03)
    Maximizing Fiber-Content in 3D Printed Earth Materials:
    Printability, Mechanical, Thermal and Environmental Assessments
  72. Soda Prabhath, Dwivedi Ashutosh, Sahana C., Gupta Souradeep (2024-03)
    Development of 3D Printable Stabilized Earth-Based Construction Materials Using Excavated Soil:
    Evaluation of Fresh and Hardened Properties
  73. Curth Alexander, Pearl Natalie, Castro-Salazar Angelica, Mueller Caitlin et al. (2024-03)
    3D Printing Earth:
    Local, Circular Material Processing, Fabrication Methods, and Life Cycle Assessment
  74. Keita Emmanuel, Perrot Arnaud (2024-02)
    Processing of Earth-Based Materials:
    Current Situation and Challenges Ahead
  75. Buson Márcio, Varum Humberto, Rezende Marco (2024-01)
    First Impressions on Three-Dimensional Printing with Earth-Based Mortar at the Faculty of Engineering of the University of Porto
  76. Chadha Kunaljit, Dubor Alexandre, Cabay Edouard, Tayoun Yara et al. (2024-01)
    Additive Manufacturing for the Circular Built Environment:
    Towards Circular Construction with Earth-Based Materials
  77. Rocha Douglas, Faria Paulina, Lucas Sandra (2023-12)
    Additive Manufacturing of Earth-Based Materials:
    A Literature Review on Mortar-Composition, Extrusion, and Processing Earth
  78. Pazols Maximiliano, Raspall Félix (2023-12)
    Terra Fibrosum:
    Continuous Fibers Reinforcement System for Robotized 3D Printing with Earth for Architecture
  79. Zavaleta Diana, Ñañez Robert, Silva Guido, Ruiz Gaby et al. (2023-11)
    Additive Construction Using Enhanced Earthen-Based Composites:
    Improvement of the Mechanical Strength and Water Durability Using Chitosan and Agave-Fibers
  80. Coniglo Alfonso, Palmiotta Annarota, Amato Michele, Gigliotti Rosario (2023-11)
    Earth-3D Printing for Non-Structural Elements of Modular Steel Buildings:
    Proposal for an Innovative and Sustainable Construction System
  81. Maierdan Yierfan, Armistead Samuel, Mikofsky Rebecca, Huang Qiqi et al. (2023-11)
    Rheology and 3D Printing of Alginate Bio-Stabilized Earth Concrete
  82. Bhusal Shiva, Sedghi Reza, Hojati Maryam (2023-11)
    Evaluating the Printability and Rheological and Mechanical Properties of 3D Printed Earthen Mixes for Carbon-Neutral Buildings
  83. Parisi Nicola (2023-10)
    New Directions of 3D Printed Earth Architecture
  84. Ji Yameng, Poullain Philippe, Leklou Ali (2023-09)
    The Selection and Design of Earthen Materials for 3D Printing
  85. Tarhan Yeşim, Perrot Arnaud (2023-08)
    Reinforcement of 3D Printable Earth-Based Mortar with Natural Textile-Material
  86. Rahal Said, Kaci Abdelhak, Skoudarli Abdeslam (2023-07)
    Evaluation of Mechanical Anisotropy-Induced by 3D Printing Process for Earth-Based Materials
  87. Joshi Arpan, Poullain Philippe, Craveiro Flávio, Bártolo Helena (2023-06)
    Earth as a Construction-Material for Sustainable 3D Printing:
    Rheological Aspect
  88. Sahoo Pitabash, Gupta Souradeep (2023-06)
    3D Printable Earth-Based Alkali-Activated Materials:
    Role of Mix-Design and Clay-Rich Soil
  89. Hanifa Mohamad, Figueiredo Bruno, Mendonça Paulo (2023-04)
    Additive Manufacturing Earth-Based Composite:
    Strategical and Computational Methodology for Building-Shell-Geometries
  90. Rückrich Stefanie, Agranati Galit, Grobman Yasha (2022-12)
    Earth-Based Additive Manufacturing:
    A Field-Oriented Methodology for Evaluating Material-Printability
  91. Silva Guido, Ñañez Robert, Zavaleta Diana, Burgos Valeria et al. (2022-07)
    Eco-Friendly Additive Construction:
    Analysis of the Printability of Earthen-Based Matrices Stabilized with Potato-Starch-Gel and Sisal-Fibers
  92. Gomaa Mohamed, Jabi Wassim, Soebarto Veronica, Xie Yi (2022-01)
    Digital Manufacturing for Earth Construction:
    A Critical Review
  93. Gomaa Mohamed, Jabi Wassim, Veliz-Reyes Alejandro, Soebarto Veronica (2021-01)
    3D Printing System for Earth-Based Construction:
    Case Study of Cob
  94. Silva Guido, Quispe L., Kim Suyeon, Nakamatsu Javier et al. (2019-11)
    Development of a Stabilized Natural Fiber-Reinforced Earth Composite for Construction Applications Using 3D Printing
  95. Perrot Arnaud, Rangeard Damien, Courteille Eric (2018-04)
    3D Printing of Earth-Based Materials:
    Processing Aspects
  96. Khoshnevis Behrokh, Bekey George (2002-09)
    Automated Construction Using Contour Crafting:
    Applications on Earth and Beyond