Skip to content

#steel

Keywords by Co - Occurrence

  1. Nan Bo, Qiao Youxin, Leng Junjie, Deng Zhengxing et al. (2026-04)
    Structural Performance of 3D Printed Concrete Reinforced with Bidirectional Steel Wire Mesh
  2. Chen Xusheng, Jia Zijian, Bao Bingtong, Dong Enlai et al. (2026-01)
    Effect of Coarse Aggregate and Steel Fiber Interaction under Extrusion on the Performance of 3D-Printed Steel Fiber-Reinforced Concrete
  3. Liu Zhenbang, Li Mingyang, Wang Sizhe, Deng North et al. (2026-01)
    Investigation on Bond-Slip Performance of Steel Rebar Embedded in Concrete Confined by 3D Concrete Printing Formwork
  4. Akgümüş Fatih, Şahin Hatice, İsafça Kaya Tuğçe, Mardani Ali (2025-12)
    Combined Effect of Recycled Tire Steel Fiber and Blast Furnace Slag on the Mechanical Performance of 3D Printable Concrete
  5. Zhang Genbao, Chen Lingke, Liu Miao, Morsy Amr et al. (2025-12)
    Enhancing the Shear Properties of U-Shaped Steel Wire Mesh Reinforced 3D Printed Composites
  6. Cao Jing, Yang Xiaojie, Shi Yaming, Yang Yi et al. (2025-12)
    Numerical Analysis of Mechanical Properties of Steel Fiber Composite Cement Mortar Considering Non-Uniformity in 3D Printing.
  7. Tong Zhongling, Guan Qingtao, Elabbasy Ahmed, Ateah Ali et al. (2025-12)
    Empowering 3D Printed Concrete:
    Discovering the Impact of Steel Fiber Reinforcement on Mechanical Performance
  8. Sifan Mohamed, Upasiri Irindu, Poologanathan Keerthan, Popo-Ola Sunday et al. (2025-12)
    Fire Performance and Design of LSF Wall Panels with 3D Printed Concrete and Steel Lipped Channel Sections
  9. Liu Xiongfei, Wang Haonan, Chen Jinnan, Sun Yuhang et al. (2025-11)
    Fiber Orientation Control in Spray-Based 3D Printed Steel Fiber Reinforced Concrete
  10. Sedighi Saeed, Rahai Alireza, Moodi Faramarz (2025-10)
    Multi-Criteria Optimization for Sustainable Concrete Mix Considering the Synergistic Effect of Recycled Steel Fiber and LC3 Concrete
  11. Ding Tao, Zhu Ruitao, Yu Kequan, Xiao Jianzhuang (2025-10)
    Direct Tensile Behavior of Three-Dimensional-Printable Steel Fiber-Reinforced Ultrahigh Performance Concrete
  12. Akgümüş Fatih, Şahin Hatice, Mardani Ali (2025-10)
    Investigation of Waste Steel Fiber Usage Rate and Length Change on Some Fresh State Properties of 3D Printable Concrete Mixtures
  13. Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2025-10)
    Dual Strategies for Enhancing Carbonation Curing in 3D Printing Steel Slag Mortars:
    Material Modification and Curing Process Innovation
  14. Philip Nivin, Jędrzejewska Agnieszka, Mathew Ashitta, Uthuppan Susan (2025-09)
    Steel Fiber Reinforcement for Improved Structural Performance and Durability of 3D Printed Mortar in Marine Environments
  15. Ding Tao, Zhu Ruitao, Huang Zhangshuo (2025-09)
    Experimental Study on the Steel Fiber Orientational Distribution of Extrusion-Based 3D-Printed Ultra High-Performance Concrete
  16. Lin Manfang, Ding Yao, Yu Fan, Li Lingzhi et al. (2025-08)
    Synergistic Strengthening of 3D‑printed ECC Beams Through Steel-Wire Mesh and Interfaces Treatments
  17. Zhao Yu, Shen Guanghai, Zhu Lingli, Ding Yahong et al. (2025-06)
    Enhancing Interfacial Bonding and Pore Structure Optimization in 3D-Printed High-Strength ECC with Steel-PE Hybrid Fibers
  18. Yao Jiaxu, Luo Jie, Qiu Minghong, Nagai Kohei (2025-06)
    Mesoscale Modeling of Anisotropic Compressive Behavior and Pull-Out Performance of 3D Printed Concrete with Steel Bars Using 3D RBSM
  19. Li Shuai, Liu Junli, Cheng Chi-Tsun, Xuan Hung et al. (2025-06)
    Design and Performance of 3D Printed Bouligand Steel Fiber-Reinforced Cementitious Composite Curved Beams
  20. Irshidat Mohammad, Albeitjali Naeem, Amjad Umar, Alnuaimi Hamad et al. (2025-05)
    From Waste to Strength:
    Recycled Steel Fibers for Sustainable 3D Printing of Cementitious Composites
  21. Chandra Jimmy, Halim Alvin, Budiman Franky, Pudjisuryadi Pamuda et al. (2025-05)
    Experimental Study of Bond Strength of Embedded Steel Reinforcement in Vibration-Based 3D Printed Concrete Mortar
  22. Sørensen Jesper, Stang Henrik (2025-04)
    Experimental Investigation of the Fatigue Behavior of 3D Printed Steel Fiber Reinforced Concrete
  23. Mortada Youssef, Hammoud Ahmad, Masoud Laith, Wyrzykowski Mateusz et al. (2025-02)
    3D Printable Ca(OH)2-Based Geopolymer Concrete with Steel Fiber Reinforcement
  24. Xia Zhenjiang, Geng Jian, Zhou Zhijie, Liu Genjin (2025-01)
    Comparative Analysis of Polypropylene, Basalt, and Steel Fibers in 3D Printed Concrete:
    Effects on Flowability, Printabiliy, Rheology, and Mechanical Performance
  25. Chen Meng, Yu Kanghao, Zhang Tong, Wang Yuting (2025-01)
    Characterizing and Modelling the Bond-Slip-Behavior of Steel-Bars in 3D Printed Engineered Cementitious Composites
  26. Chen Meng, Li Jiahui, Zhang Tong, Zhang Mingzhong (2025-01)
    3D Printability of Recycled Steel-Fiber-Reinforced Ultra-High-Performance Concrete
  27. Fernand Muhirwa, Yang Zhenjun (2025-01)
    Structural and Microstructural Behavior of Novel 3DP-UHPFRC Beam with Discrete Steel-Fibers and Steel-FRP Composite Bar
  28. Huang Junxiang, Peng Zeqin, Tan Xianzhong, Gong Guofang et al. (2024-12)
    Mechanism Analysis of the Magnetic Field-Assisted 3D Printed Steel-Fiber-Reinforced Concrete
  29. Li Shuai, Khieu Hai, Black Jay, Nguyen Hung-Xuan et al. (2024-12)
    Two-Scale 3D Printed Steel-Fiber-Reinforcements-Strategy for Concrete Structures
  30. Wu Mushuang, Wang Zixiao, Chen Yuxuan, Zhu Mengyu et al. (2024-11)
    Effect of Steel-Slag on Rheological and Mechanical Properties of Sulfoaluminate-Cement-Based Sustainable 3D Printing Concrete
  31. Lin Manfang, Yu Kequan (2024-11)
    A Rapid Reinforcement-Technique Using FRP and Steel-Wire Mesh in 3D Printed ECC Beams
  32. Hassan Zohaib, Raza Saim, Shafei Behrouz, Mahoutian Mehrdad et al. (2024-11)
    Innovations to Improve 3D Concrete Printing of Portland Cement-Steel-Slag Blended Mortars
  33. Rodriguez Fabian, Moini Mohamadreza, Agrawal Shubham, Williams Christopher et al. (2024-10)
    Mechanical Response of Small-Scale 3D Printed Steel-Mortar Composite Beams
  34. Althoey Fadi, Zaid Osama, Ahmed Bilal, Elhadi Khaled (2024-10)
    Impact of Double Hooked Steel-Fibers and Nano-Kaolin-Clay on Fresh Properties of 3D Printable Ultra-High-Performance Fiber-Reinforced Concrete
  35. Zhao Wanting, Zhao Yu, Zhu Lingli, Guan Xuemao (2024-10)
    Preparation of 3D Printed Concrete from Solid Waste:
    Study of the Relationship Between Steel-Slag Characteristics and Early Performance in 3D Printing
  36. Tran Nhi, Tran Mien, Tran Jonathan, Nguyen Anh et al. (2024-09)
    Eco-Friendly 3D Printed Concrete Using Steel-Slag-Aggregate:
    Buildability, Printability and Mechanical Properties
  37. Wang Qiang, Yang Wenwei, Wang Li, Zhang Dan et al. (2024-09)
    Flexural Performance of the Integrated Steel-Truss-Reinforced 3D Printed Concrete Beams:
    Experimental and Numerical Analysis
  38. Reißig Silvia, Herdan Annika, Mechtcherine Viktor (2024-09)
    Rheological Behavior of Steel-Fiber-Reinforced Concrete in the Context of Additive Manufacturing
  39. Mechtcherine Viktor, Taubert Markus, Müller Steffen, Butler Marko et al. (2024-09)
    Integration of Steel Reinforcement into Extrusion-Based 3D Concrete Printing of Monolithic Concrete Elements
  40. Ojeda Juan, Grebner Philipp, Knaack Ulrich, Rosendahl Philipp (2024-09)
    3D Printing with WAAM to Form and Stiffen Lightweight Steel Panels for Freeform Façades
  41. Sun Xiaoyan, Lin Xiqiang, He Huanan, Yang Hongyang et al. (2024-09)
    Steel Reinforced 3D Printing Concrete Housing Building and Its Modular Assembly Construction
  42. Hassan Zohaib, Bernal Susan, Raza Saim, Kammer David et al. (2024-09)
    Feasibility-Assessment of 3D Printability of Portland-Cement-Steel-Slag Blended Mortar
  43. Nguyen Vuong, Tran Jonathan, San Ha Ngoc, Xie Yi et al. (2024-08)
    Blast-Resistance of 3D Printed Bouligand Concrete Panels Reinforced with Steel-Fibers:
    Numerical Investigations
  44. Li Xiaoteng, Newlands Moray, Jones Rod (2024-08)
    Performance of a Multi-Layer Aligned Steel-Fiber-Reinforced Concrete Beam:
    A Preliminary Investigation Towards 3D Printing
  45. Liu Zhenbang, Li Mingyang, Wang Xiangyu, Wang Sizhe et al. (2024-07)
    Axial Performances of the Steel-Rebar-Reinforced Column Confined by the Steel-Cable-Reinforced 3D Concrete Printing Permanent Formwork
  46. Zhong Kuangnan, Huang Kaiyun, Liu Zhichao, Wang Fazhou et al. (2024-07)
    CO2-Driven Additive Manufacturing of Sustainable Steel-Slag-Mortars
  47. Sun Chang, Li Jiawang, Liu Qiong, Chen Kailun et al. (2024-07)
    Compressive Performance and Damage Mechanism of Concrete Short Columns Confined by Steel-Wires-Reinforced 3DPM
  48. Tran Mien, Ly Duy-Khuong, Nguyen Tan, Tran Nhi (2024-05)
    Robust Prediction of Workability Properties for 3D Printing with Steel-Slag-Aggregate Using Bayesian Regularization and Evolution Algorithm
  49. Mu Ru, Chen Jiao, Qing Longbang, Fan Chunhao et al. (2024-05)
    Properties of a Steel-Fiber-Reinforced Cementitious Composite Stool with Digitally Distributed Steel-Fibers
  50. Bodur Burak, Mecit Işık Muhammet, Benli Ahmet, Bayrak Barış et al. (2024-05)
    Durability of Green Rubberized 3D Printed Lightweight Cement Composites Reinforced with Micro-Attapulgite and Micro-Steel-Fibers:
    Printability and Environmental Perspective
  51. Yang Yekai, Lu Pengyuan, Liu Zhongxian, Dong Liang et al. (2024-04)
    Effect of Steel-Fiber with Different Orientations on Mechanical Properties of 3D Printed Steel-Fiber-Reinforced Concrete:
    Meso-Scale Finite-Element-Analysis
  52. Jia Zijian, Zhou Mengting, Chen Yu, Wang Wei et al. (2024-03)
    Effect of Steel-Fiber Shape and Content on Printability, Microstructure and Mechanical Properties of 3D Printable High-Strength Cementitious Materials
  53. Zhu Lingli, Zhao Wanting, Zhao Yu, Guan Xuemao (2024-03)
    Mechanism Analysis of Rheological Properties of 3D Printed Steel-Slag Cementitious Composite Based on Low-Field Nuclear-Magnetic-Relaxation-Test
  54. Liu Qiong, Cheng Shengbo, Peng Bin, Chen Kailun et al. (2024-01)
    The Buildability and Flexural Properties of 3D Printed Recycled Mortar Reinforced with Synchronized Steel-Cable Under Different Reinforcement Ratios
  55. Slavcheva Galina, Artamonova Olga, Kotova Кristina, Shvedova Mariia et al. (2023-12)
    Pull-Out Behavior of Steel- and Carbon-Fibers in 3D Printable Cement Matrices of Various Compositions
  56. Liu Qiong, Cheng Shengbo, Sun Chang, Chen Kailun et al. (2023-11)
    Steel-Cable Bonding in Fresh Mortar and 3D Printed Beam Flexural Behavior
  57. Coniglo Alfonso, Palmiotta Annarota, Amato Michele, Gigliotti Rosario (2023-11)
    Earth-3D Printing for Non-Structural Elements of Modular Steel Buildings:
    Proposal for an Innovative and Sustainable Construction System
  58. Ahmadi Khatereh, Mousavi Seyed, Dehestani Mehdi (2023-09)
    Influence of Nano-Coated Micro-Steel-Fibers on Mechanical and Self-Healing Properties of 3D Printable Concrete Using Graphene-Oxide and Polyvinyl-Alcohol
  59. Zohrabyan Vahan, Zöller Raphael, Gradic Simon, Braml Thomas (2023-06)
    Potential of 3D Printed Steel Fiber Reinforced Concrete Components for the Protection of Critical Infrastructure:
    Impact and Free-Fall Tests
  60. Mu Ru, Mei Shaolin, Wang Xiaowei, Chen Xiangshang et al. (2023-06)
    Mechanical Properties of a 3D Printed SFRC Beam with Steel-Fiber-Distribution Adaptive to Tensile Stress
  61. Chen Wei, Pan Jinlong, Zhu Binrong, Ma XiaoMeng et al. (2023-06)
    Improving Mechanical Properties of 3D Printable One-Part Geopolymer Concrete with Steel-Fiber-Reinforcement
  62. Yu Qian, Zhu Binrong, Li Xuesen, Meng Lingqi et al. (2023-04)
    Investigation of the Rheological and Mechanical Properties of 3D Printed Eco-Friendly Concrete with Steel-Slag
  63. Maurya Shubham, Dey Dhrutiman, Panda Biranchi, Dixit Uday (2023-04)
    In-Line Reinforcement of Steel-Cable in 3D Concrete Printing
  64. Ding Tao, Wang Ziyue, Liu Haoran, Xiao Jianzhuang (2023-03)
    Simulation on Pull-Out Performance of Steel-Bar from 3D Printed Concrete
  65. Giwa Ilerioluwa, Game Daniel, Ahmed Hassan, Noorvand Hassan et al. (2023-02)
    Performance and Macrostructural Characterization of 3D Printed Steel-Fiber-Reinforced Cementitious Materials
  66. Liu Miao, Wang Li, Ma Guowei, Li Weiwei et al. (2022-11)
    U-Type Steel-Wire-Mesh for the Flexural Performance Enhancement of 3D Printed Concrete:
    A Novel Reinforcing Approach
  67. Nguyen Vuong, Liu Junli, Li Shuai, Zhang Guomin et al. (2022-10)
    Modelling of 3D Printed Bio-Inspired Bouligand Cementitious Structures Reinforced with Steel-Fibers
  68. Zhang Yu, Zhang Yunsheng, Qian Rusheng, Liu Guojian et al. (2022-09)
    Influence of Steel-Fiber on the Water-Absorption of 3D Printed Concrete
  69. Ahmed Hassan, Giwa Ilerioluwa, Game Daniel, Hebert Marc et al. (2022-09)
    Studying Steel-Fiber-Reinforcement for 3D Printed Elements and Structures
  70. Riegger Felix, Zäh Michael (2022-08)
    Additive Manufacturing of Steel-Reinforcements:
    Integration of WAAM Reinforcements in Particle-Bed 3D Printing with Selective Cement-Paste-Intrusion
  71. Wang Zhibin, Jia Lutao, Deng Zhicong, Zhang Chao et al. (2022-08)
    Bond Behavior Between Steel-Bars and 3D Printed Concrete:
    Effect of Concrete Rheological Property, Steel-Bar Diameter and Paste-Coating
  72. Singh Amardeep, Chen Zhiyuan, Duan Zhenhua, Li Lei (2022-07)
    Utilization Potential of Steel-Fibers in 3D Printed Functionally Graded Cementitious Composite:
    An Experimental Approach
  73. Menna Costantino, Esposito Laura (2022-06)
    Flexural Behavior of Steel-Reinforced Topology-Optimised Beams Fabricated by 3D Concrete Printing
  74. Ma Guowei, Yan Yufei, Zhang Mo, Sanjayan Jay (2022-05)
    Effect of Steel-Slag on 3D Concrete Printing of Geopolymer with Quaternary Binders
  75. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2022-05)
    Bonding Strength of Steel-Rebars Perpendicular to the Hardened 3D Printed Concrete-Layers
  76. Chen Yidong, Zhang Yunsheng, Pang Bo, Wang Dafu et al. (2022-04)
    Steel-Fiber Orientational Distribution and Effects on 3D Printed Concrete with Coarse Aggregate
  77. Mechtcherine Viktor, Taubert Markus, Müller Steffen, Will Frank et al. (2022-03)
    Additive Manufacturing of Monolithic, Steel-Reinforced Concrete Walls Using CONPrint3D-Reinforced Methods
  78. Nguyen Ngoc, Bui Tan-Trung, Bui Quoc-Bao (2022-02)
    Fiber-Reinforced Concrete for Slabs without Steel-Rebar-Reinforcement:
    Assessing the Feasibility for 3D Printed Individual Houses
  79. Singh Amardeep, Liu Qiong, Xiao Jianzhuang, Lyu Qifeng (2022-02)
    Mechanical and Macrostructural Properties of 3D Printed Concrete Dosed with Steel-Fibers under Different Loading-Direction
  80. Ding Tao, Qin Fei, Xiao Jianzhuang, Chen Xiaoming et al. (2022-01)
    Experimental Study on the Bond Behavior Between Steel-Bars and 3D Printed Concrete
  81. Zhou Jiehang, Lai Jianzhong, Du Longyu, Wu Kai et al. (2021-12)
    Effect of Directionally Distributed Steel-Fiber on Static and Dynamic Properties of 3D Printed Cementitious Composite
  82. Lesovik Valeriy, Fediuk Roman, Amran Mugahed, Alaskhanov Arbi et al. (2021-12)
    3D Printed Mortars with Combined Steel and Polypropylene Fibers
  83. Xiao Jianzhuang, Chen Zixuan, Ding Tao, Zou Shuai (2021-10)
    Bending Behavior of Steel-Cable-Reinforced 3D Printed Concrete in the Direction Perpendicular to the Interfaces
  84. Dai Shuo, Zhu Huajun, Zhai Munan, Wu Qisheng et al. (2021-06)
    Stability of Steel-Slag as Fine Aggregate and Its Application in 3D Printing Materials
  85. Liu Miao, Zhang Qiyun, Tan Zhendong, Wang Li et al. (2021-01)
    Investigation of Steel-Wire-Mesh-Reinforcement Method for 3D Concrete Printing
  86. Dubov Alexey, Ruben Sam, Korshikov Vasily, Ivanova Anna et al. (2020-11)
    3D Printing of Polymers with Continuous Fibers to Replace Steel-Reinforcement and Structural Steel in Construction
  87. Arunothayan Arun, Nematollahi Behzad, Sanjayan Jay, Ranade Ravi et al. (2020-07)
    Quantitative Evaluation of Orientation of Steel-Fibers in 3D Printed Ultra-High-Performance Concrete
  88. Bester Frederick, Heever Marchant, Kruger Jacques, Cho Seung et al. (2020-07)
    Steel-Fiber Links in 3D Printed Concrete
  89. Assaad Joseph, Yassin Abdallah, Sakka Fatima, Hamzeh Farook (2020-05)
    A Modular Approach for Steel Reinforcing of 3D Printed Concrete:
    Preliminary Study
  90. Baz Bilal, Aouad Georges, Leblond Philippe, Mansouri Omar et al. (2020-05)
    Mechanical Assessment of Concrete:
    Steel Bonding in 3D Printed Elements
  91. Pham Luong, Tran Jonathan, Sanjayan Jay (2020-04)
    Steel-Fiber-Reinforced 3D Printed Concrete:
    Influence of Fiber Sizes on Mechanical Performance
  92. Li Zhijian, Wang Li, Ma Guowei (2020-01)
    Mechanical Improvement of Continuous Steel-Micro-Cable-Reinforced Geopolymer Composites for 3D Printing Subjected to Different Loading Conditions
  93. Yassin Abdallah, Hamzeh Farook, Sakka Fatima (2019-12)
    Agent-Based Modeling to Optimize Workflow of Robotic Steel and Concrete 3D Printers
  94. Bos Freek, Bosco Emanuela, Salet Theo (2018-11)
    Ductility of 3D Printed Concrete Reinforced with Short Straight Steel-Fibers
  95. Pfändler Patrick, Wangler Timothy, Mata-Falcón Jaime, Flatt Robert et al. (2018-09)
    Potentials of Steel-Fibers for Mesh Mould Elements
  96. Mechtcherine Viktor, Grafe Jasmin, Nerella Venkatesh, Spaniol Erik et al. (2018-05)
    3D Printed Steel-Reinforcement for Digital Concrete Construction:
    Manufacture, Mechanical Properties and Bond Behavior
  97. Lim Jian, Panda Biranchi, Pham Quang-Cuong (2018-05)
    Improving Flexural Characteristics of 3D Printed Geopolymer Composites with In-Process Steel-Cable-Reinforcement
  98. Ledderose Lukas, Neudecker Stefan, Kloft Harald (2015-08)
    Robot-Aided Rearrangement of Steel-Fibers in UHPFRC via Magnetic Forces