Study on Bending Performance of 3D Printed PVA-Fiber-Reinforced Cement-Based Material (2024-05)¶
10.1016/j.conbuildmat.2024.136637
Luo Surong, Li Wenqiang, Wang Dehui
Journal Article - Construction and Building Materials, Vol. 433, No. 136637
Abstract
To deepen the application and development of 3D Printing Construction Technology, the rheological characteristics, compressive strength and bending performance of 3D printed polyvinyl alcohol fiber (PVA fiber) reinforced cement-based material were explored. The direction of the intralayer interfaces and the fiber’s distribution direction caused the anisotropy of 3D printed PVA fiber reinforced cement-based material. The printed specimens presented different failure patterns in different compressive directions, and there was certain anisotropy in the X, Y and Z directions. For the bending performance, the load-midpoint deflection curves of casted specimens and the Zx direction of printed specimens showed the strain hardening behavior, while the Zy direction of printed specimens did not. Compared with the Zy specimen, the bending strength of the Zx specimen was about 3 ∼ 4 times higher, and the peak deflection was about an order of magnitude higher. The anisotropy of the printed specimen can be used to improve the bending performance in a specific loading direction to a certain extent.
¶
43 References
- Arunothayan Arun, Nematollahi Behzad, Ranade Ravi, Bong Shin et al. (2021-02)
Fiber-Orientation Effects on Ultra-High-Performance Concrete Formed by 3D Printing - Bester Frederick, Heever Marchant, Kruger Jacques, Zijl Gideon (2020-11)
Reinforcing Digitally Fabricated Concrete:
A Systems Approach Review - Buswell Richard, Silva Wilson, Jones Scott, Dirrenberger Justin (2018-06)
3D Printing Using Concrete-Extrusion:
A Roadmap for Research - Chen Mingxu, Yang Lei, Zheng Yan, Li Laibo et al. (2021-01)
Rheological Behaviors and Structure Build-Up of 3D Printed Polypropylene- and Polyvinyl-Alcohol-Fiber-Reinforced Calcium-Sulphoaluminate-Cement Composites - Ding Tao, Xiao Jianzhuang, Zou Shuai, Wang Yu (2020-06)
Hardened Properties of Layered 3D Printed Concrete with Recycled Sand - Ding Tao, Xiao Jianzhuang, Zou Shuai, Zhou Xinji (2020-08)
Anisotropic Behavior in Bending of 3D Printed Concrete Reinforced with Fibers - Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2019-03)
An Approach to Develop Printable Strain-Hardening Cementitious Composites - Figueiredo Stefan, Rodríguez Claudia, Ahmed Zeeshan, Bos Derk et al. (2020-05)
Mechanical Behavior of Printed Strain-Hardening Cementitious Composites - Han Yilong, Yang Zhihan, Ding Tao, Xiao Jianzhuang (2020-08)
Environmental and Economic Assessment on 3D Printed Buildings with Recycled Concrete - Jayathilakage Roshan, Rajeev Pathmanathan, Sanjayan Jay (2020-01)
Yield-Stress-Criteria to Assess the Buildability of 3D Concrete Printing - Ketel Sabrina, Falzone Gabriel, Wang Bu, Washburn Newell et al. (2018-04)
A Printability Index for Linking Slurry Rheology to the Geometrical Attributes of 3D Printed Components - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Hardened Properties of High-Performance Printing Concrete - Le Thanh, Austin Simon, Lim Sungwoo, Buswell Richard et al. (2012-01)
Mix-Design and Fresh Properties for High-Performance Printing Concrete - Ma Guowei, Li Zhijian, Wang Li, Wang Fang et al. (2019-01)
Mechanical Anisotropy of Aligned Fiber-Reinforced Composite for Extrusion-Based 3D Printing - Ma Lei, Zhang Qing, Lombois-Burger Hélène, Jia Zijian et al. (2022-09)
Pore-Structure, Internal Relative Humidity, and Fiber-Orientation of 3D Printed Concrete with Polypropylene-Fiber and Their Relation with Shrinkage - Ma Guowei, Zhang Junfei, Wang Li, Li Zhijian et al. (2018-06)
Mechanical Characterization of 3D Printed Anisotropic Cementitious Material by the Electromechanical Transducer - Marchon Delphine, Kawashima Shiho, Bessaies-Bey Hela, Mantellato Sara et al. (2018-05)
Hydration- and Rheology-Control of Concrete for Digital Fabrication:
Potential Admixtures and Cement-Chemistry - Mechtcherine Viktor, Buswell Richard, Kloft Harald, Bos Freek et al. (2021-02)
Integrating Reinforcement in Digital Fabrication with Concrete:
A Review and Classification Framework - Moeini Mohammad, Hosseinpoor Masoud, Yahia Ammar (2020-05)
Effectiveness of the Rheometric Methods to Evaluate the Build-Up of Cementitious Mortars Used for 3D Printing - Nematollahi Behzad, Vijay Praful, Sanjayan Jay, Nazari Ali et al. (2018-11)
Effect of Polypropylene Fiber Addition on Properties of Geopolymers Made by 3D Printing for Digital Construction - Nerella Venkatesh, Beigh Mirza, Fataei Shirin, Mechtcherine Viktor (2018-11)
Strain-Based Approach for Measuring Structural Build-Up of Cement-Pastes in the Context of Digital Construction - Ogura Hiroki, Nerella Venkatesh, Mechtcherine Viktor (2018-08)
Developing and Testing of Strain-Hardening Cement-Based Composites (SHCC) in the Context of 3D Printing - Paolini Alexander, Kollmannsberger Stefan, Rank Ernst (2019-10)
Additive Manufacturing in Construction:
A Review on Processes, Applications, and Digital Planning Methods - Paul Suvash, Tay Yi, Panda Biranchi, Tan Ming (2017-08)
Fresh and Hardened Properties of 3D Printable Cementitious Materials for Building and Construction - Roussel Nicolas (2018-05)
Rheological Requirements for Printable Concretes - Rubin Ariane, Hasse Jéssica, Repette Wellington (2021-01)
The Evaluation of Rheological Parameters of 3D Printable Concretes and the Effect of Accelerating-Admixture - Shakor Pshtiwan, Nejadi Shami, Paul Gavin (2019-05)
A Study into the Effect of Different Nozzles Shapes and Fiber-Reinforcement in 3D Printed Mortar - Soltan Daniel, Li Victor (2018-03)
A Self-Reinforced Cementitious Composite for Building-Scale 3D Printing - Souza Marcelo, Ferreira Igor, Moraes Elisângela, Senff Luciano et al. (2020-09)
3D Printed Concrete for Large-Scale Buildings:
An Overview of Rheology, Printing Parameters, Chemical Admixtures, Reinforcements, and Economic and Environmental Prospects - Sun Junbo, Aslani Farhad, Lu Jenny, Wang Lining et al. (2021-06)
Fiber-Reinforced Lightweight Engineered Cementitious Composites for 3D Concrete Printing - Sun Xiaoyan, Zhou Jiawei, Wang Qun, Shi Jiangpeng et al. (2021-11)
PVA-Fiber-Reinforced High-Strength Cementitious Composite for 3D Printing:
Mechanical Properties and Durability - Weng Yiwei, Li Mingyang, Liu Zhixin, Lao Wenxin et al. (2018-12)
Printability and Fire Performance of a Developed 3D Printable Fiber-Reinforced Cementitious Composites under Elevated Temperatures - Weng Yiwei, Li Mingyang, Ruan Shaoqin, Wong Teck et al. (2020-03)
Comparative Economic, Environmental and Productivity-Assessment of a Concrete Bathroom Unit Fabricated Through 3D Printing and a Pre-Cast Approach - Weng Yiwei, Lu Bing, Li Mingyang, Liu Zhixin et al. (2018-09)
Empirical Models to Predict Rheological Properties of Fiber-Reinforced Cementitious Composites for 3D Printing - Wolfs Robert, Bos Freek, Salet Theo (2019-03)
Hardened Properties of 3D Printed Concrete:
The Influence of Process Parameters on Inter-Layer Adhesion - Xiao Jianzhuang, Chen Zixuan, Ding Tao, Zou Shuai (2021-10)
Bending Behavior of Steel-Cable-Reinforced 3D Printed Concrete in the Direction Perpendicular to the Interfaces - Xiao Jianzhuang, Liu Haoran, Ding Tao (2020-11)
Finite-Element-Analysis on the Anisotropic Behavior of 3D Printed Concrete under Compression and Flexure - Xiao Jianzhuang, Zou Shuai, Ding Tao, Duan Zhenhua et al. (2021-08)
Fiber-Reinforced Mortar with 100% Recycled Fine Aggregates:
A Cleaner Perspective on 3D Printing - Yuan Qiang, Li Zemin, Zhou Dajun, Huang Tingjie et al. (2019-08)
A Feasible Method for Measuring the Buildability of Fresh 3D Printing Mortar - Yuan Qiang, Zhou Dajun, Li Baiyun, Huang Hai et al. (2017-11)
Effect of Mineral Admixtures on the Structural Build-Up of Cement-Paste - Zhang Yu, Zhang Yunsheng, She Wei, Yang Lin et al. (2019-01)
Rheological and Hardened Properties of the High-Thixotropy 3D Printing Concrete - Zhou Yiyi, Jiang Dan, Sharma Rahul, Xie Yi et al. (2022-11)
Enhancement of 3D Printed Cementitious Composite by Short Fibers:
A Review - Zhu Binrong, Pan Jinlong, Nematollahi Behzad, Zhou Zhenxin et al. (2019-07)
Development of 3D Printable Engineered Cementitious Composites with Ultra-High Tensile Ductility for Digital Construction
11 Citations
- Lin Yilin, Zeng Tao, Wang Yuting, Li Dehui et al. (2026-01)
Printable and Mechanical Properties of 3D-Printed Nano-Silica Modified Concretes - Wang Yuting, Chen Meng, Zhang Tong, Zhang Mingzhong (2025-10)
Influence of Limestone Calcined Clay on the Mechanical Behaviour of 3D Printed Engineered Cementitious Composites - Luo Surong, Jin Wenhao, Zhang Zhaorui, Zhang Kaijian (2025-09)
Constitutive Relationship of 3D Printed Fiber Reinforced Recycled Sand Concrete Under Uniaxial Compression - Medeiros Fernanda, Anjos Marcos, Maia José, Dias Leonardo et al. (2025-08)
Effect of Sisal Fibers on the Behavior of 3D-Printed Cementitious Mixtures Exposed to High Temperatures - Jin Yuan, Jiang Chengzhi, Gan Xingyu, Sun Zhaoyang et al. (2025-07)
Enhancing the Printability of 3D Printed White Cementitious Materials with Accelerators:
Evolution of Early-Age Hydration and Rheology - Hopkins Ben, Si Wen, Khan Mehran, McNally Ciaran (2025-06)
Recent Advancements in Polypropylene Fiber-Reinforced 3D-Printed Concrete:
Insights into Mix Ratios, Testing Procedures, and Material Behaviour - Chen Meng, Sun Hao, Wang Yuting, Zhang Tong (2025-05)
Relationship Between Interfacial Pore Structure and Anisotropic Dynamic Splitting Behaviour of 3D Printed Engineered Cementitious Composites - Abedi Mohammadmadhi, Waris Muhammad, Alawi Mubarak, Jabri Khalifa et al. (2024-12)
From Local Earth to Modern Structures:
A Critical Review of 3D Printed Cement Composites for Sustainable and Efficient Construction - Luo Surong, Li Wenqiang, Cai Yili, Zhang Kaijian (2024-12)
Effects of Carbonated Recycled Sand on the Interfacial Bonding Performance of 3D Printed Cement-Based Material - Luo Surong, Jin Wenhao, Wu Weihong, Zhang Kaijian (2024-11)
Rheological and Mechanical Properties of Polyformaldehyde-Fiber-Reinforced 3D Printed High-Strength Concrete with the Addition of Fly-Ash - Han Kang, Gu Fei, Yang Huashan, Tian Xinchen et al. (2024-09)
PVA-Fiber-Reinforced Red Mud-Based Geopolymer for 3D Printing:
Printability, Mechanical Properties and Microanalysis
BibTeX
@article{luo_li_wang.2024.SoBPo3PPFRCBM,
author = "Surong Luo and Wenqiang Li and Dehui Wang",
title = "Study on Bending Performance of 3D Printed PVA-Fiber-Reinforced Cement-Based Material",
doi = "10.1016/j.conbuildmat.2024.136637",
year = "2024",
journal = "Construction and Building Materials",
volume = "433",
pages = "136637",
}
Formatted Citation
S. Luo, W. Li and D. Wang, “Study on Bending Performance of 3D Printed PVA-Fiber-Reinforced Cement-Based Material”, Construction and Building Materials, vol. 433, p. 136637, 2024, doi: 10.1016/j.conbuildmat.2024.136637.
Luo, Surong, Wenqiang Li, and Dehui Wang. “Study on Bending Performance of 3D Printed PVA-Fiber-Reinforced Cement-Based Material”. Construction and Building Materials 433 (2024): 136637. https://doi.org/10.1016/j.conbuildmat.2024.136637.