Skip to content

#bending

Keywords by Co - Occurrence

  1. Slavcheva Galina, Levchenko Artem, Artamonova Olga, Karakchi-Ogli Davut et al. (2025-12)
    Mechanical Behavior and Reinforcement Efficiency of 3D Printed Concrete Under Compression, Tension, and Bending
  2. Telichko Victor, Slavcheva Galina, Levchenko Artem (2025-12)
    Experimentally Verified FE Model of Bending Reinforced 3D-Printed Concrete Elements
  3. Korol Ewelina, Jenta Arkadiusz, Chaudhari Ojas, Wójcik Michal (2025-11)
    Experimental Investigation of Concrete Beams Under Bending, Manufactured with 3D Additive Printing Technology
  4. Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk, Seepim Sirakan et al. (2025-10)
    Investigation of Out-of-Plane Bending Behaviour of 3D-Printed Reinforced and Unreinforced Walls
  5. Seepim Sirakan, Dhanasekara Chamil, Tanapornraweekit Ganchai, Tangtermsirikul Somnuk et al. (2025-10)
    Effects of Printing Interval Time on the Structural Performance of 3D-Printed Beams Under Four-Point Bending Loads
  6. Sun Hou-Qi, Zeng Jun-Jie, Zhuge Yan, Liu Yue (2025-06)
    3D Printed Functionally Graded Concrete Plates:
    Concept and Bending Tests
  7. Chen Zhaohui, Yue Ziyi, Gerong Wangdui, Wang Zhenyue et al. (2025-05)
    Effect of Orthotropy and Printing Patterns on the Bending Performance of 3D Printed Concrete Grid Components
  8. Sun Hou-Qi, Zeng Jun-Jie, Hong Guang-Yao, Zhuge Yan et al. (2025-01)
    3D Printed Functionally Graded Concrete Plates:
    Concept and Bending Behavior
  9. Bai Gang, Guan Jingyuan, Wang Li, Li Zhijian et al. (2024-07)
    Bending Performance of 3D Printed Ultra-High-Performance Concrete Composite Beams
  10. Luo Surong, Li Wenqiang, Wang Dehui (2024-05)
    Study on Bending Performance of 3D Printed PVA-Fiber-Reinforced Cement-Based Material
  11. Tang Yuxiang, Xiao Jianzhuang, Ding Tao, Liu Haoran et al. (2024-01)
    Trans-Layer and Inter-Layer Fracture Behavior of Extrusion-Based 3D Printed Concrete Under Three-Point Bending
  12. Pi Yilin, Lu Cong, Li Baoshan, Zhou Junhui (2023-10)
    Crack Propagation and Failure Mechanism of 3D Printing Engineered Cementitious Composites (3DP-ECC) Under Bending Loads
  13. Ingle Vaibhav, Prem Prabhat, Ramamurthy Vignesh, Ravichandran Darssni (2023-09)
    Acoustic Emission Characterization of 3D Printed Ultra-High-Performance Concrete Beams Under Bending
  14. Zeng Jun-Jie, Li Pei-Lin, Yan Zitong, Zhou Jie-Kai et al. (2023-08)
    Behavior of 3D Printed HPC Plates with FRP-Grid-Reinforcement Under Bending
  15. Zbyszyński Wojciech, Pietras Daniel, Sadowski Tomasz (2023-04)
    Data-Image-Correlation-Analysis of the Destruction-Process of 3D Printable Layered Beams Subjected to the Three-Point Bending Process
  16. Aramburu Amaia, Calderon-Uriszar-Aldaca Iñigo, Puente Iñigo (2023-02)
    Parametric Modelling of 3D Printed Concrete Segmented Beams with Rebars Under Bending Moments
  17. Nguyen Vuong, Choudhry Niranjan, Panda Biranchi, Nguyen-Xuan Hung et al. (2021-12)
    Performance of Concrete Beam Reinforced with 3D Printed Bio-Inspired Primitive Scaffold Subjected to Three-Point Bending
  18. Xiao Jianzhuang, Chen Zixuan, Ding Tao, Zou Shuai (2021-10)
    Bending Behavior of Steel-Cable-Reinforced 3D Printed Concrete in the Direction Perpendicular to the Interfaces
  19. Zhang Ping, Lu Xiao-jun (2021-09)
    Study on Bending Strength of Cementitious Composites Based on Fiber-Alignment
  20. Ding Tao, Xiao Jianzhuang, Zou Shuai, Zhou Xinji (2020-08)
    Anisotropic Behavior in Bending of 3D Printed Concrete Reinforced with Fibers
  21. Hass Lauri, Bos Freek (2020-07)
    Bending and Pull-Out Tests on a Novel Screw Type Reinforcement for Extrusion-Based 3D Printed Concrete
  22. Zahabizadeh Behzad, Pereira João, Gonçalves Claúdia, Cunha Vítor (2020-03)
    Inverse Analysis of Three-Point Bending Tests for 3D Printed Fiber-Reinforced Mortars
  23. Li Zhijian, Wang Li, Ma Guowei (2019-02)
    Method for the Enhancement of Buildability and Bending-Resistance of Three-Dimensional-Printable Tailing Mortar
  24. Li Zhijian, Wang Li, Ma Guowei (2018-05)
    Method for the Enhancement of Buildability and Bending-Resistance of 3D Printable Tailing Mortar